Weintek EB8000 MT8000 HMI User Manual
Below you will find brief information for HMI EB8000 MT8000. The MT8000 is a Human Machine Interface (HMI) device that uses the EB8000 software to configure and control industrial equipment. The MT8000 can be integrated with various systems, such as PLCs, sensors, and actuators, allowing for real-time monitoring and data logging. It can be used for various purposes, such as controlling production lines, monitoring process variables, and displaying alarms.
advertisement
▼
Scroll to page 2
of
7
advertisement
Key Features
- Ethernet communication
- CF card and USB support
- Recipe editor
- EasyBuilder 8000 graphical editor
- On-line and off-line simulation
Frequently Answers and Questions
How do I connect the MT8000 to my network?
You can connect to the MT8000 through Ethernet. You will need to configure its IP address and password in the "Settings" section of the Project Manager software.
Can I download data to the MT8000 from a CF card or USB stick?
Yes, using the "Build Download Data for CF/USB Disk..." function in the Project Manager software.
How do I update the firmware of the MT8000?
You can update the firmware using the "Download" function in the Project Manager software. Select the "Firmware" option and then choose the desired firmware file.
What is the "Recipe Editor" function used for?
The "Recipe Editor" allows you to create and modify recipe data that can be used by the MT8000 to control industrial processes. This data can be stored on the MT8000 itself or uploaded from a computer.
How do I run an on-line simulation?
Select the "On-line Simulation..." function in the Project Manager software. You will need to specify the source of the *.xob file containing the simulation data.
What is the difference between on-line and off-line simulation?
On-line simulation runs the simulation using the actual hardware of the MT8000. Off-line simulation runs the simulation on your computer, without using the actual hardware.
Related manuals
Download
PDF
advertisement