Compaq | 8500R - ProLiant - 4 GB RAM | User manual | HP ProLiant DL120 Generation 6 (G6)

QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Overview
Front View:
1.
Cover
2.
Power Supply (400 Watt)
3.
Optional Slim 9.5mm DVD ROM
4.
Slide-out System Insight Display
5.
Front USB connectors (2)
6.
Power Button, UID Button, and Front LED Indicators
7.
Support for up to four Non-Hot Plug SATA or SAS Hard
Drives
8.
Non Hot Plug Dual Rotor Fans (4)
9.
Two PCI express Slots (one x16, one x4 Lanes)
10. Processor Socket (Intel® Xeon® Quad-Core)
11. Six PC3-10600E UB ECC DDR3 Memory Slots
Rear View:
1.
Power supply cable socket
2.
Mouse connector
3.
NIC 1 connector
4.
NIC 2 connector
5.
Serial Connector
6.
Expansion slot 2, PCI-e x8, Low-profile, Half-length
7.
Expansion slot 1, PCI-e x16, Full high, Full-length
8.
9.
10.
11.
12.
13.
UID button/LED
Management NIC connector
Security - Trusted Platform Module Video connector
USB connectors (2)
USB connectors (2)
Keyboard connector
At a Glance
The HP ProLiant DL120 G6 Server is an entry-level rack-optimized server providing you with all confidence of a HP ProLiant server.
The single processor, 1U server is ideal for single-application IT infrastructure, web and edge-of-network applications. The HP
ProLiant DL120 provides two PCI-Express slots with an optional 3rd x4 PCI-Express slot upgrade, including HP HBAs and Smart
Array Controllers, provide support for SAS hard disk drives. DL120 G6 HP Lights Out 100i Remote Management provides costeffective remote management from anywhere, anytime. Plus, you get the cost-effective solution of a single-processor platform with
the performance advantages of quad-core technology.
Processor:
Processor
Intel® Xeon® processor X3400 series
Intel® 3420 Chipset with up to 1333MHz Front Side Bus (FSB)
Memory:
Memory
6 DIMM sockets
Supports up to 8GB, using 2GB PC3-10600E DDR3 Unbuffered (UDIMM) memory, operating at 1333MHz when fully
populated at 2 DIMMs per Channel in 4 slots
Supports up to 16GB, using 4GB Quad-Rank PC3-8500R DDR3 Registered (RDIMM) memory, operating at 1066MHz
when fully populated at 2 DIMMs per Channel in 4 slots
Supports up to 12GB, using 2GB PC3-10600R DDR3 Registered (RDIMM) memory, operating at 1333MHz when fully
populated at 3 DIMMs per Channel in 6 slots
DA - 13504
North America — Version 3 — December 18, 2009
Page 1
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Overview
Storage Controller:
Controller
Base Model: Integrated 6 Port SATA
(4 ports available for hard drives)
NOTE: Transfer rate:3Gb/s SATA
Performance Model: HP Smart Array P212/256MB Controller (RAID 0/1/1+0/5/5+0)
Internal Drive Support:
Support
Up to 4 LFF SATA/SAS HDD drive bays
(1) Optional slim 9.5mm DVD-ROM or DVD RW
Network Controller:
Controller
Embedded HP NC107i PCI Express Gigabit Server Adapter
Expansion Slots:
Slots
Two total slots:
(1) Full length PCI Express Gen 2 x16 slot (x16 connector)
(1) Half-length, low-profile PCI Express x4 slot (x8 connector)
Optional (1) PCI-Express Gen 1 x1 (x4 connector)
USB 2.0 Ports:
Ports
Up to 7 Total: (2) front; (1) internal; (4) rear accessible ports
Internal USB port (optional) for flexible storage, security, or USB drive key deployment
Infrastructure Management:
Management
HP ProLiant Onboard Administrator Powered by Lights-Out 100i simplifies server setup, health monitoring, control, and
Lights-Out 100 remote administration. Can be upgraded with a Lights-Out 100i Advanced License for Virtual KVM
(remote graphical console) and Virtual Media.
With G6, ProLiant 100-series server administrators are able to deploy and monitor their servers using methods similar
to 300 series servers and above. Agents and the Easy Set-up CD are available that provide a user experiences
consistent with 300 series and above.
With Easy Set-up CD, customers get SmartStart "like" deployment tools that reduce the time required for server
setup and updates. Easy Set-up CDs and their ISO images are provided with each ProLiant G6 100-series server
and are used to perform assisted installations for one or two servers. Users performing multi-server installations
involving large numbers of servers may require the following deployment tools:
SmartStart Scripting Toolkit - Automated scalable deployment utility
Smart Components - a self-executable software consisting of driver and firmware
With agents and providers, ProLiant 100 series servers get environmental monitoring that is similar and consistent
to that of ProLiant 300 series servers and above. This server now offers the HP Insight Management Agents and
HP Insight Management WBEM Providers, two well established sets of management and Internet standards
technologies that provide capabilities which provide integration to HP Systems Insight Manager (SIM).
Form Factor:
Factor
1U (1.7" / 4.32 cm) Rack Mount Chassis
27.5" (69.85 cm) Deep
New fixed mounting rails included with all models
Warranty:
Warranty
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP
Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of
purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to
warranty services are available through HP Care Pack services or customized service agreements. Hard drives have
either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 3 year Next Day Parts replacement, 0-Years Labor, 0-Years Onsite support. Additional
information regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 13504
North America — Version 3 — December 18, 2009
Page 2
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Standard Features
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
Processor
Quad-Core Processors
One of the following
Intel® Xeon® processor HP X3430 (2.40GHz, 95W, 8MB, 1333, Turbo 1/1/2/3)
depending on Model
Intel® Xeon® processor HP X3440 (2.53GHz, 95W, 8MB, 1333, HT, Turbo 1/1/2/3)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more
details.
Intel® Xeon® processor HP X3450 (2.67GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/4)
Intel® Xeon® processor HP X3460 (2.80GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/5)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more
details.
Intel® Xeon® processor HP X3470 (2.93GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/5)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more
details.
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel® Turbo Boost
Technology, with 4, 3, 2, and 1 cores are active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may
depend on the quantity and type of DIMMs installed.
Cache Memory
Integrated 1x8MB Level3 Intel® Smart Cache
Chipset
Intel® 3420 Chipset
Memory Protection
ECC
Memory
One of the following
depending on Model
Type
Standard (Base Models)
Standard (Performance
Models)
Maximum Memory
DDR3 1066/1333MHz Unbuffered (UDIMM) and Registered (RDIMM)
2GB (1x2GB) UDIMM
4GB (2x2GB) RDIMM
Supports up to 8GB DDR3 1066/1333 Unbuffered ECC DIMM or 16GB
DDR3 800/1066/1333 Registered DIMM.
Supports up to 4 UDIMMs or 6 dual rank RDIMMs
NOTE: Depending on the memory configuration and processor model, the memory speed may run at
1333MHz, 1066MHz, or 800MHz. Please see the Online Memory Configuration Tool at:
www.hp.com/go/ddr3memory-configurator.
Network Controller
Embedded NC107i Gigabit Server Adapter
DA - 13504
North America — Version 3 — December 18, 2009
Page 3
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Standard Features
Expansion Slots
1
(Standard)
2
(Standard)
1
(Optional)
Storage Controllers
Technology
PCIe G2
Bus
Width***
Width
X16
Connector
Width
x16
PCIe G1
X4
x16
Bus Number*
Number Device No.**
No.
0
1
0
28
Form
Factor
Full length,
full height slot
Low profile
slot
Full length,
full height slot
Notes
PCI-X
64-bit
N/A
0
1
(133MHz,
3.3Volt)
* Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus
assignment number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID
by bus (starting with the lowest bus)
*** Indicates the number of physical electrical lanes running to a PCI-e connector.
Base Model
Performance Model
Integrated 6 Port SATA (4 ports available for hard disks)
NOTE: Transfer rate: 3Gb/s SATA.
NOTE: Hot Plug capability requires a Smart Array SAS Controller and the HP
CA ASSY 384SATA to MINI-SAS Kit (P/N 591475-B21) must be ordered.
HP Smart Array P212/256MB Controller (RAID 0/1/1+0/5/5+0)
Storage
Optical Drive
Hard Drives
Optional 9.5mm DVD-ROM, or DVD-RW Drive
Base Model
Up to 4 non-hot plug SATA/SAS 3.5" drives
(Pluggable drives capable) supported. None ships standard
NOTE: SAS requires optional HBA or SA card.
NOTE: Support for additional SAS/SATA hot
plug drives requires HP Smart Array Controller.
Performance Model
Up to 4 hot plug SATA/SAS 3.5" drives
(Hot Pluggable)
supported. None ships standard
Maximum Internal
Storage Type
Hot Plug SAS
Non-Hot Plug SATA
1.8TB
3.0TB
Interfaces
Serial
Pointing Device
Keyboard
Graphics
Network RJ-45
USB 2.0
1
1
1
1 (rear)
2
7 (2 front, 1 internal, 4 rear)
NOTE: Please see the following URL for additional information regarding
USB support:
http://h18004.www1.hp.com/products/servers/platforms/usb-support.html
DA - 13504
(4 x 450GB) 3.5" SAS
(4 x 750GB) 3.5" SATA
North America — Version 3 — December 18, 2009
Page 4
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Standard Features
Graphics
64MB shared supports all display resolutions up to 1600 x 1200 16bpp @ 75Hz
Form Factor
Rack (1U), (1.7 in/4.32 cm), 27.5" deep
Embedded Manageability HP ProLiant Onboard
HP ProLiant Onboard Administrator Powered by Lights-Out 100i, simplifies
Administrator Powered by server setup, control, and lights-out remote administration of ProLiant 100
LO100i
Series servers and functions without additional software. It can be accessed
from any location via LAN or Internet and works hand-in-hand with HP
Systems Insight Manager (SIM), helping customers unlock the value of the
ProLiant platform and deliver the highest possible quality of IT service to the
business. Advanced Licenses are required for Virtual KVM and Virtual Media
feature activation.
Key features of LO100i are:
IPMI 2.0 & SMASH CLP support
ROM Setup Utility
Improvements to virtual media with the addition of USB 2.0 drives and
protocol support for much faster transfer speeds and DVD-ROM
support plus simplified virtual media (floppy and CD with no FTTP
server requirements)
Enhanced browser interface and embedded KVM over IP provides OSindependent remote graphical console
24x7 Technical Support and Update (TSU) 1 year support and license
upgrades included in Advanced license
HP Insight Control
management software
Insight Control server
deployment
NOTE: For more information, see: http://www.hp.com/go/lo100
HP Insight Control server deployment is a deployment solution for HP
ProLiant and Integrity servers hosted on a Windows CMS. It automates the
process of deploying and provisioning server software, enabling companies
to quickly and easily adapt to changing business demands. Insight Control
server deployment includes software optimizations for HP servers, including
the HP scripting toolkits, configuration jobs for leading industry-standard
operating systems, sample unattended files, and HP server support packs that
include software drivers, management agents, and important documentation.
Deploying servers can be accomplished either through imaging or through
scripting.
Insight Control server deployment is hosted on a Windows server and is
intended for heterogeneous environments deploying Windows, Linux,
VMware ESX and Microsoft Hyper-V systems.
Insight Control server deployment includes one year of 24 x 7 HP Software
Technical Support and Update Service ensuring rapid access to HP support
staff and proactive delivery of software updates. For more information about
this service, please visit:
http://www.hp.com/services/insight.
Core Server Management ProLiant 100 Series G6 HP provides management solutions that are designed to simplify a server's
Core Management
installation, configuration, and maintenance throughout the entire server
Software for ProLiant 100 lifecycle. This provides the customers with higher levels of operational
DA - 13504
North America — Version 3 — December 18, 2009
Page 5
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Standard Features
Series Servers
efficiency and highly reliable systems.
While ProLiant 100 series G6 servers do not support the Insight Foundation
Suite for ProLiant, they support a key subset of this important suite software
tools and utilities which are very suitable for this class of server: SIM, SMH,
agents, providers, and a SmartStart 'like' deployment CD called Easy Set-up
which greatly simplifies server set-up. Additionally the ProLiant DL100 and
SL100 G6 models support the SmartStart Scripting Toolkit (SSSTK), an
automated scalable deployment utility.
Information on core management supported on ProLiant 100 series G6
servers can be found at these URLS:
Core Infrastructure
Management
HP Systems Insight
Manager
Insight Management
Agents
Core Management: http://www.hp.com/go/coremanagement
HP ProLiant 100 series Easy Set-up CDs:
www.hp.com/servers/easysetup
HP Systems Insight Manager (HP SIM) provides a unified, secure and
extensible standards-based environment to centrally manage servers, storage
and other infrastructure devices, (both HP and non-HP) across multiple
operating system platforms.
HP Insight Management Agents and Insight Management Providers are
available for HP Systems Insight Manager (SIM) Integration.
ProLiant 100-series G6 servers can use the same SNMP based Insight
Management Agents supported by other ProLiant servers. As a result,
administrators can use HP Systems Insight Manager (SIM) 5.3 and greater to
manage ProLiant 100-series G6 servers. Administrators can also use any
other SNMP- based management tool. These agents are obtained as part of
the ProLiant 100-series model-specific "Easy Set-up" CDs, or through
http://www.hp.com/servers/easysetup
The following capabilities are enabled on the 100-series G6 servers by the
SNMP agents:
Health monitoring capabilities, including monitoring for drives, fans,
network, power supplies, and temperature
Alerting capabilities, including basic alert notification for Smart Array
drive pre-failure only
Performance monitoring capabilities providing information on
processor, memory, disk free space, network utilization
Easy Set-up CD
For additional information, please see: http://www.hp.com/go/insight
Easy Set-up CDs are available on all 100-series G6 servers and are also
available as an ISO image web download. HP ProLiant Easy Set-up CDs
provide easy, step-by-step, single and multi-server server utilities for the
ProLiant 100-series G6 servers to streamline server setup for 100-series G6
servers. The user experience is consistent with SmartStart and offers the
following capabilities:
Boot environment and GUI
Assisted Installation: Windows 2003 Server and Windows 2008 Server
drivers
Manual installation: Windows 2003 Server, Windows 2008 Server,
DA - 13504
North America — Version 3 — December 18, 2009
Page 6
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Standard Features
and Linux drivers (specific OS support varies by server. Refer to each
server's QuickSpecs for supported versions)
HP Insight Diagnostics
AutoRun
Array Configuration Utility (ACU) has been combined with Array
Diagnostics Utility (ADU) to offer both configuration of array
controllers and storage devices and testing of array controller
hardware
SmartStart Scripting Toolkit (SSSTK) and Smart Components for
software and drivers for DL100 and SL100 servers
NOTE: OS and SW available for Manual Installation are listed on each
servers' QuickSpecs.
SmartStart Scripting Toolkit The SmartStart Scripting Toolkit is a server deployment product that delivers
(SSSTK)
an unattended automated installation for high-volume server deployments.
The SmartStart Scripting Toolkit includes a set of utilities for configuring and
deploying servers in a customized, predictable, and unattended manner.
These utilities enable you to duplicate the configuration of a source server on
target servers with minimum user interaction.
The Toolkit is designed for IT experts with experience in scripting operating
system installations and configuring ProLiant server hardware.
Subscriber's Choice
ROMPaq, software and
latest drivers
For additional information, please see:
http://h18004.www1.hp.com/products/servers/management/toolkit/
index.html
Subscriber's Choice Driver and Support Alerts/Notifications is a web-based
email subscription service that provides software and driver change
notifications for ProLiant products. Sign up at:
http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become
available, on a weekly or monthly basis.
The latest software, drivers, and firmware fully optimized and tested for your
ProLiant server and options; downloaded from Software and Drivers
download pages website at: http://www.hp.com/go/support and from
www.hp.com/servers/easysetup. Contains the following:
HP Insight Management Agents for Systems Insight Manager (SIM)
Integration
HP Systems Management Homepage
Array Configuration Utility (ACU)
Array Diagnostics Utility (ADU)
HP Insight Diagnostics
DA - 13504
North America — Version 3 — December 18, 2009
Page 7
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Standard Features
Industry Standard
Compliance
ACPI 3.0a
PCI 2.3 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
USB 2.0
IPMI 2.0
DCMI 1.0
Intelligent Manageability HP ProLiant Onboard Administrator Powered by the HP Integrated Lights-Out 100i with optional LO100i
Advanced Licenses for Virtual KVM and Virtual Media.
Embedded IPMI standard reporting
Easy Set-up CD and ISO Image Web downloads
Array Configuration Utility (ACU)
Array Diagnostics Utility (ADU)
HP Insight Diagnostics
HP Insight Management Agents and Insight Management Providers for Systems Insight Manager (SIM)
Integration
Security
Power-on password
Keyboard password
USB Port control
Removable DVD-ROM Drive Assembly (optional)
Dedicated/Shared LO100i management NIC port
Administrator's password
Security - Trusted Platform The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used to
Module
authenticate the server platform. These artifacts can include passwords, certificates and encryption keys.
Windows® BitLocker™ Drive Encryption (BitLocker) is a data protection feature available in Windows
Server® 2008. BitLocker leverages the enhanced security capabilities of a Trusted Platform Module
(TPM) version 1.2. The TPM works with BitLocker to help protect user data and to ensure that a server
running Windows Server 2008 has not been tampered with while the system was offline.
NOTE: For more information about TPM, including a white paper, go to www.hp.com/go/TPM
NOTE: ProLiant OS pre-installed units will come with the partition required for TPM deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be retained. Misplacing or losing
the key could result in data loss.
Server Power Cords
One 6' Highline (IEC-IEC) power cord ships standard
NOTE: HP ProLiant DL120 G6 server ship standard with a C13 to C14 2M Highline jumper cord. If
customers require a local power cord, they can check the power cord matrix for the appropriate cord.
Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix.
DA - 13504
North America — Version 3 — December 18, 2009
Page 8
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Standard Features
Power Supply
Auto-sensing 400-Watt PFC Power Supply, CE Mark Compliant
UPS and PDU Power
Cord Matrix
Please see the UPS and PDU cable matrix's on the HP Power Protection and Management page. Under
Power Cords, click on the "HP Power Cord Matrix" link. That link will list cable descriptions, requirements,
and specifications for UPS and PDU units. Please see the following link:
www.hp.com/products/powercords.
System Fans
4 dual rotor fans ship standard.
Required Cabling
For required cabling information, refer to the Web site at:
http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/15351-15351-3328412-241644-2414753579703.html.
Operating Systems and
Virtualization Software
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server, please visit our Support Matrix at:
http://www.hp.com/go/supportos and our driver download page
http://www.hp.com/support/DL120G6
Rack Airflow
Requirements
Rack 10000 G2 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 G2 Series Racks provide enhanced airflow for maximum
cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure
adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must
allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit
adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be
a minimum of 2.75 inches (7 cm).
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling
that can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD
provided with the server.
Rack Kit
Quick deploy rail system provides tool-free support for racks with square or round mounting holes
(including Compaq/HP 7000, 9000, 10000 G2 and HP series), with an adjustment range of 24" - 36".
The ambidextrous cable management arm can be mounted on either the left or right side for improved
cable management.
DA - 13504
North America — Version 3 — December 18, 2009
Page 9
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Standard Features
Telco Rack Kit
Installation into Telco 2 post, and 4 post, or threaded holes racks requires a 3rd party option kit. Go to:
www.hp.com/go/rackandpower for more information.
HP Factory Express
Capabilities
HP Factory Express offers configuration, customization, integration and deployment services for HP
servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services for your specific server model please contact your sales
representative or go to: http://www.hp.com/go/factory-express.
HP Enterprise
Configurator
The HP eConfigure-Enterprise Configurator now provides factory default racking for our HP hardware
portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our
valued customers. If you require "custom" rack configuration, please contact HP's Customer Business
Center or an Authorized Partner for assistance. http://www.hp.com/products/configurator.
Service and Support
HP Care Pack Services provide total care and support expertise with committed response times designed
to meet your IT and business needs.
HP Care Pack services include coverage for the HP branded hardware options qualified for the server
that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22inch and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the
same service level and for the same coverage period as the server. Coverage of UPS Battery is not
included and standard warranty terms & conditions apply. For servers or storage systems installed within
a rack, service also covers all HP qualified rack options installed within the same rack.
To fully capitalizing on your HP ProLiant servers' capabilities requires a service partner who thoroughly
understands your server technology and systems environment. HP Services, an industry leader in
provision of support solutions provides a range of support services designed to meet the varying needs of
your business. Whether an SMB, or large global corporation, HP has ProLiant server support offers to
help you speedily deploy and maximize system uptime.
Recommended Service - simplify ProLiant solution implementation, maintenance, and management.
Support - 3-Year 24x7 4 hr Response service support coverage
Deployment Service - HW Installation only
Enhanced Service - optimize service level to increase IT performance and availability.
Support - 3-Year 24x7 24 hr Call to repair service support coverage
Support -3-Year 24x7 6 hr Call to repair service support coverage
Support Plus -24x7 4 hr Response service support including OS coverage
DA - 13504
North America — Version 3 — December 18, 2009
Page 10
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Standard Features
Refer to the information on the Installation of a ProLiant on the ProLiant Data Sheet; to be delivered on a
scheduled basis 8am-5pm, M-F, excluding HP holidays.
NOTE: For a complete listing of service offerings and information visit:
http://www.hp.com/services/proliantservices
http://h20219.www2.hp.com/services/us/en/warranty/carepack-servers-proliant.html
DA - 13504
North America — Version 3 — December 18, 2009
Page 11
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Models
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
(1) Intel® Xeon® processor X3430 (2.40GHz, 95W, 8MB, 1333, Turbo
Base Model
Processor
1/1/2/3)
HP DL120 G6 X3430
8MB Intel® Smart Cache
Cache Memory
Pluggable SATA
2GB (1x2GB) PC3-10600E DDR3 UB ECC
Memory
490931-001
Embedded HP NC107i PCI Express Gigabit Server Adapter
Network Controller
HP Embedded 6 Port SATA Controller (4 ports for HDD)
Storage Controller
None Ships Standard
Hard Drives
Up to 4 large form factor Hot Plug drives (cold pluggable only)
Internal Storage
NOTE: Hot Plug support requires Smart Array Controller and HP CA ASSY
38" 4 SATA to MINI-SAS Kit (P/N 591475-B21).
None Ships Standard
Optical Drive
Auto-sensing 400-Watt PFC Power Supply, CE Mark Compliant
Power Supply
1U
Form Factor
Performance Model
Processor
HP DL120 G6 X3450 HP Cache Memory
SAS
Memory
490932-001
Network Controller
Storage Controller
Hard Drives
Internal Storage
Optical Drive
Power Supply
Form Factor
DA - 13504
(1) Intel® Xeon® processor X3450 (2.67GHz, 95W, 8MB, 1333, HT, Turbo
1/1/4/4)
8MB Intel® Smart Cache
4GB (2x2GB) PC3-10600R DDR3 RDIMM
Embedded HP NC107i PCI Express Gigabit Server Adapter
HP Smart Array P212/256MB Controller
None Ships Standard
Up to 4 large form factor Hot Plug drives
None Ships Standard
Autosensing 400-Watt PFC Power Supply, CE Mark Compliant
1U
North America — Version 3 — December 18, 2009
Page 12
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Smart Buys
NOTE: Smart Buy program language (standard used for all Quick Specs)
Processor
(1) Intel® Xeon® processor HP X3440 (2.53GHz, 95W, 8MB, 1333, HT,
HP DL120 G6 X3440
NHP S-Buy
Turbo 1/1/2/3)
581874-005
HP 2GB (1x2) UDIMM 2Rx8 PC3-10600E
Memory
Embedded HP NC107i PCI Express Gigabit Server Adapter
Network Controller
HP Embedded 6 Port SATA Controller (4 ports for HDD)
Storage Controller
Two (2) 250GB 3G SATA 7.2K NHP 3.5" MDL HDD
Hard Drives
HP 9.5mm SATA DVD-ROM Optical Drive
Optical Drive
Autosensing 400-Watt PFC Power Supply, CE Mark Compliant
Power Supply
1U
Form Factor
DL120G6 X3460 2GB
Hot Plug Svr
581875-005
Processor
Memory
Network Controller
Storage Controller
Hard Drives
Optical Drive
Power Supply
Form Factor
DA - 13504
(1) Intel® Xeon® processor HP X3460 (2.80GHz, 95W, 8MB, 1333, HT,
Turbo 1/1/4/5)
HP 4GB (2x2) UDIMM 2Rx8 PC3-10600E
Embedded HP NC107i PCI Express Gigabit Server Adapter
HP Smart Array P212/0 Controller
None Ships Standard
HP 9.5mm SATA DVD RW Optical Drive
Autosensing 400-Watt PFC Power Supply, CE Mark Compliant
1U
North America — Version 3 — December 18, 2009
Page 13
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start
with a CTO Chassis.
NOTE: FIO indicates that this option only available as a Factory Installable Option.
Step 1: Base Configuration (choose one of the following configurable models)
Models
HP DL120G6 NHP CTO Chassis
Includes:
Embedded NC107i Gigabit Server Adapter
1 full length PCI Express x16 slot (x16 lane) and 1 half length low profile PCI Express
x4 slot (x8 lane)
Integrated 6 Port SATA Controller
Rack (1U) form factor, (1.7 in/4.32 cm)
Fixed, mounting rails
HP DL120G6 HP CTO Chassis
Includes:
Embedded NC107i Gigabit Server Adapter
Hot-Plug drive cage, including cables
1 full length PCI Express x16 slot (x16 lane) and 1 half length low profile PCI Express
x4 slot (x8 lane)
Integrated 6 Port SATA Controller
Rack (1U) form factor, (1.7 in/4.32 cm)
Fixed, mounting rails
490933-B21
583183-B21
Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
Processor
Memory
Intel® Xeon® processor HP X3430 (2.40GHz, 95W, 8MB, 1333, Turbo 1/1/2/3),
FIO
Intel® Xeon® processor HP X3440 (2.53GHz, 95W, 8MB, 1333, HT, Turbo
1/1/2/3), FIO
Intel® Xeon® processor HP X3450 (2.67GHz, 95W, 8MB, 1333, HT, Turbo
1/1/4/4), FIO
Intel® Xeon® processor HP X3460 (2.80GHz, 95W, 8MB, 1333, HT, Turbo
1/1/4/5), FIO
Intel® Xeon® processor X3470 processor (2.93GHz, 95W, 8MB, 1333, HT, Turbo
1/1/4/5), FIO
Unbuffered with ECC DIMMs (UDIMM)
HP 2GB 2Rx8 PC3-10600E Kit
HP 1GB 1Rx8 PC3-10600E Kit
Registered DIMMs (RDIMM)
HP 2GB 2Rx8 PC3-10600R-9
DA - 13504
North America — Version 3 — December 18, 2009
581869-L21
578471-L21
581870-L21
578473-L21
578475-L21
500670-B21
500668-B21
500656-B21
Page 14
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Configuration Information - Factory Integrated Models
HP 4GB 4Rx8 PC3-8500R-7 LP Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3 Memory
Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on
ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient
Hard Drives (Required
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller,
only if 490933-B21
firmware, and the server backplane) should operate at the same data transfer rate or
selected in Step 1 above) the system bandwidth will be negotiated down to an acceptable level for all
components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
NOTE: The below Hard drives can only be selected with the Non-Hot Plug CTO
Chassis (P/N 490933-B21)
SAS Non-Hot Plug 3.5" Enterprise (ENT) Drives
HP 450GB 3G SAS 15K 3.5" DP NHP ENT HDD
HP 400GB 3G SAS 10K 3.5" DP NHP ENT HDD
HP 300GB 3G SAS 15K 3.5" DP NHP ENT HDD
HP 146GB 3G SAS 15K 3.5" DP NHP ENT HDD
SATA Non-Hot Plug 3.5" Midline (MDL) Drives
HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD
HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD
HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD
SATA Non-Hot Plug 3.5" Entry (ETY) Drives
HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD
500660-B21
454234-B21
508232-B21
417950-B21
417855-B21
462595-B21
458941-B21
458939-B21
458947-B21
Step 3: Choose Additional Options for Factory Integration (only one of the following from
each list unless otherwise noted)
Storage Controllers
Power Supply
SAS Controllers (Required if NHP SAS Hard Drive selected in Step 2 or if SAS hard
drives are selected in Step 4 below when the Hot-Plug model 583183-B21 is
selected in Step 1 above.)
HP Internal SAS/SATA 4-Port Cable
NOTE: This cable option kit is automatically included in any CTO configuration when
a HBA or SAS controller is selected with Hot Plug Chassis. Not supported with Nonhot plug (NHP) Chassis.
HP Smart Array P212/256 MB w/Battery FIO
HP Smart Array P212/256MB Controller
HP Smart Array P212/Zero Memory (ZM) Controller
NOTE: Any factory integrated Smart Array Controller purchase automatically includes
the HP HBA SAS-SATA 4x1LN Cable Kit (P/N 452130-B21).
HP 400W Power Supply FIO Kit
HP 500W NHP Power Supply Option Kit
DA - 13504
North America — Version 3 — December 18, 2009
457692-B21
491191-B21
462834-B21
462828-B21
515739-B21
583437-B21
Page 15
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Configuration Information - Factory Integrated Models
Step 4: Choose Additional Factory Integratable Options
NOTE: For additional options, please refer to the "Core Options and Additional Options" section below.
DA - 13504
North America — Version 3 — December 18, 2009
Page 16
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Core Options
NOTE: Some options may not be factory integratable. Contact your local sales representative for additional information.
HP Internal USB Cable G6 Kit
536769-B21
Unique Options
NOTE: This option required to connect a USB device internally.
Memory (DIMMs)
Unbuffered with ECC DIMMs (UDIMM)
HP 2GB 2Rx8 PC3-10600E Kit
HP 1GB 1Rx8 PC3-10600E Kit
Registered DIMMs (RDIMM)
HP 2GB 2Rx8 PC3-10600R-9
500670-B21
500668-B21
500656-B21
HP 4GB 4Rx8 PC3-8500R-7 LP Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3 Memory
Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on
ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient
500660-B21
Optical Drives
HP 9.5mm SATA DVD-ROM Optical Drive
HP 9.5mm SATA DVD RW Optical Drive
481045-B21
481047-B21
Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller,
firmware, and the server backplane) should operate at the same data transfer rate or
the system bandwidth will be negotiated down to an acceptable level for all
components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
SAS Hot Plug 3.5" Enterprise (ENT) Drives
HP 450GB 3G SAS 15K 3.5 DP HDD
HP 300GB 3G SAS 15K 3.5" DP HDD
HP 146GB 3G SAS 15K 3.5" DP HDD
SAS Hot Plug 3.5" Midline (MDL) Drives
HP 1TB 3G SAS 7.2K 3.5" DP MDL HDD
HP 750GB 3G SAS 7.2K 3.5" DP MDL HDD
SAS Non-Hot Plug 3.5" Enterprise (ENT) Drives
HP 450GB 3G SAS 15K 3.5" DP NHP ENT HDD
HP 400GB 3G SAS 10K 3.5" DP NHP ENT HDD
HP 300GB 3G SAS 15K 3.5" DP NHP ENT HDD
HP 146GB 3G SAS 15K 3.5" DP NHP ENT HDD
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12244_na/12244_na.html
SATA Hot Plug 3.5" Enterprise (ENT) Drives
HP 160GB 3G SATA 7.2K 3.5in ETY HDD
DA - 13504
North America — Version 3 — December 18, 2009
454232-B21
416127-B21
384854-B21
461137-B21
461135-B21
454234-B21
508232-B21
417950-B21
417855-B21
458945-B21
Page 17
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Core Options
SATA Hot Plug 3.5" Midline (MDL) Drives
HP 1TB 3G SATA 7.2K 3.5in MDL HDD
HP 500GB 3G SATA 7.2K 3.5in MDL HDD
HP 250GB 3G SATA 7.2K 3.5" MDL HDD
HP 750GB 3G SATA 7.2K 3.5" MDL HDD
SATA Non-Hot Plug 3.5" Midline (MDL) Drives
HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD
HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD
HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD
SATA Non-Hot Plug 3.5" Entry (ETY) Drives
454146-B21
458928-B21
458926-B21
458930-B21
462595-B21
458941-B21
458939-B21
HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13201_na/13201_na.html
3.5" SATA Non-Hot Plug Drives
HP 250GB 1.5G SATA 7.2K NHP 3.5" HDD
HP 160GB 1.5G SATA 7.2K NHP 3.5" HDD
NOTE: The previous generation of 1.5G SATA drives are still supported.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/11940_na/11940_na.html
458947-B21
Communications
HP NC112T PCI Express Gigabit Server Adapter
HP NC360T PCI Express Dual Port Gigabit Server Adapter
HP NC364T PCI Express Quad Port Gigabit Server Adapter
HP NC373F PCI Express Multifunction Gigabit Server Adapter
HP NC373T PCI Express Multifunction Gigabit Server Adapter
HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information: www.hp.com/go/ProLiantNICs
503746-B21
412648-B21
435508-B21
394793-B21
394791-B21
458492-B21
Power Supplies
HP 500W NHP Power Supply Option Kit
583437-B21
DA - 13504
North America — Version 3 — December 18, 2009
411276-B21
411275-B21
Page 18
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Additional Options
HP Insight Software
HP Insight Control server deployment
HP Insight Control server deployment, Electronic License including 1 year of 24x7
Technical Support and Updates
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase multiple
licenses with a single activation key.
NOTE: Customer will receive a license entitlement certificate. The license entitlement
certificate must be redeemed online or via fax in order to obtain the license activation
key(s). Includes one year of 24 x 7 HP Software Technical Support and Update
Service.
NOTE: Licenses ship without media. The Insight Software Media Kit can be ordered
separately, or can be downloaded at: http://www.hp.com/go/insightcontrol (click on
Download button).
NOTE: For additional license options please see the Insight Control QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12631_na/12631_na.html
Security
HP Trusted Platform Module Option Kit
Storage Controllers
SAS Controllers
Smart Array P212 Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
Smart Array P411 Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB Battery Backed Write Cache
Optional Upgrades
256 MB Cache Module
NOTE: Supported on HP Smart Array P212 Controller only.
512MB BBWC
NOTE: Supported on HP Smart Array P411 Controller only.
Battery Kit upgrade
NOTE: To enable BBWC on the 256MB cache.
NOTE: Supported on HP Smart Array P212 Controller, and HP Smart Array
P411only.
HP Smart Array Advanced Pack No Media 1-Server license including 1yr 24x7
Technical Support
NOTE: This part number can be used to purchase a single license or to order multiple
licenses with a single activation key. Customers will receive a license entitlement
certificate via e-mail. The license entitlement certificate must be redeemed online or
via fax in order to obtain the license activation key(s). Include one year of 24x7 HP
Software Technical Support Services.
HP CA ASSY 38" 4 SATA to MINI-SAS Kit
HP Internal SAS/SATA 4-Port Cable
NOTE: The purchase of any HBA or HP Smart Array Controller requires the purchase
of the 4 Lane SAS/SATA host fan out Cable Kit.
SCSI HBA
DA - 13504
North America — Version 3 — December 18, 2009
T9082AAE
488069-B21
462828-B21
462834-B21
462830-B21
462832-B21
462968-B21
462967-B21
462969-B21
516471-B21
591475-B21
457692-B21
Page 19
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Additional Options
HP SC11Xe Host Bus Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13202_na/13202_na.html
(Smart Array P411 Controller)
http://h18000.www1.hp.com/products/quickspecs/13200_na/13200_na.html
(Smart Array Advanced Pack)
http://h18000.www1.hp.com/products/quickspecs/12566_na/12566_na.html
(SC11Xe HBA)
Tape Storage
NOTE: For the complete listing of Tape Drive offerings, please see:
http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html
Tape Drives
USB Rack-Mount Tape Solutions
HP StorageWorks 1U USB Rack-Mount Kit with one DAT 160 USB Tape Drive
NOTE: Pre-configured with one DAT 160 USB tape drive.
SAS Rack-Mount Tape Solutions
NOTE: HP recommends purchasing the HP SC44Ge HBA (416096-B21) for a
dedicated SAS HBA for tape.
HP StorageWorks LTO-2 Ultrium 448 SAS Internal Tape Drive
NOTE: Mounts inside the 1U SAS Rack-Mount Kit (AE459A)
SCSI Rack-Mount Tape Solutions
NOTE: SCSI Controller required. HP recommends purchasing the HP SC11Xe HBA
(412911-B21) for a dedicated SCSI HBA for tape.
HP StorageWorks 1U SCSI Rack-mount kit with one LTO-2 Ultrium 448 SCSI Tape
Drive (Carbonite)
NOTE: Pre-configured with one LTO-2 Ultrium 448 SCSI tape drive.
Disk-Based Backup
412911-B21
RDX Removable Disk Backup
HP StorageWorks RDX160 External Removable Disk Backup System
NOTE: 160GB of Disk Storage.
HP StorageWorks RDX320 External Removable Disk Backup System
NOTE: 320GB of Disk Storage.
HP StorageWorks RDX500 External Removable Disk Backup System
NOTE: 500GB of Disk Storage.
NOTE: Please see the HP RDX Removable Disk Backup System QuickSpecs for
additional information:
http://h18000.www1.hp.com/products/quickspecs/13036_na/13036_na.html
D2D Backup
HP StorageWorks D2D120 Backup System with Data Protector Express Software Kit
NOTE: 2TB of Disk Storage.
HP StorageWorks D2D130 Backup System with LTO-3 Ultrium 920 SAS Tape Drive
NOTE: 3TB of Disk Storage.
HP StorageWorks D2D2503i Backup System
NOTE: 3TB of Disk Storage.
HP StorageWorks D2D2504i Backup System
DA - 13504
North America — Version 3 — December 18, 2009
AG703A
DW085A
DW028B
AJ766A
AJ768A
AJ935A
EH924A
EH952A
EH945A
EJ002A
Page 20
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Additional Options
NOTE: Please see the HP D2D Backup Systems QuickSpecs for additional
information: http://www.hp.com/go/d2d
HP StorageWorks Fibre
Channel HBAs
NOTE: The following is a list of all Fibre Channel Host Bus Adapters for Windows and
Linux. For detailed compatibility information please see:
http://h18006.www1.hp.com/storage/saninfrastructure/hba.html
Emulex Fibre Channel HBAs
HP StorageWorks 81E 8Gb SP PCI-e FC HBA
HP StrorageWorks 82E 8Gb Dual-port PCI-e FC HBA
HP StorageWorks FC2142SR 4Gb PCI-e HBA
HP StorageWorks FC2242SR Dual Channel 4 Gb PCI-e HBA
HP StorageWorks FC2143 4Gb PCI-X 2.0 -to-Fibre Channel HBA
HP StorageWorks FC2243 Dual Channel 4Gb PCI-X 2.0 HBA
QLogic Fibre Channel HBAs
HP StorageWorks 81Q PCI-e FC HBA
HP StorageWorks 82Q 8Gb Dual Port PCI-e FC HBA
HP StorageWorks FC1142SR 4Gb PCI-e HBA
HP StorageWorks FC1242SR Dual Channel 4 Gb PCI-e HBA
HP StorageWorks FC1143 4Gb PCI-X 2.0 HBA
HP StorageWorks FC1243 Dual Channel 4Gb PCI-X 2.0 HBA
HP StorageWorks
Modular Smart Array
MSA SAN Storage Arrays
HP StorageWorks 60 Modular Smart Array Enclosure
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12627_na/12627_na.html
HP StorageWorks 70 Modular Smart Array
NOTE: Please see the Modular Smart Array 70 QuickSpecs for additional information
including configuration steps and additional options needed for a complete solution
at: http://h18000.www1.hp.com/products/quickspecs/12652_na/12652_na.html
DA - 13504
North America — Version 3 — December 18, 2009
AJ762A
AJ763A
A8002A
A8003A
AD167A
AD168A
AK344A
AJ764A
AE311A
AE312A
AB429A
AE369A
418408-B21
418800-B21
Page 21
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Additional Options
Uninterruptible Power
Systems
Power Distribution Units
HP Rack-mountable UPS
HP UPS R1500 G2
HP, R1.5kVA UPS, 1U
NOTE: Please see QuickSpecs Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/12507_na/12507_na.html
HP R3000 UPS
HP R/T3000 UPS, Low voltage
HP R/T3000 UPS, High voltage
HP R3000 VA UPS, 2U, L5-30
HP R3000 VA UPS, 2U, L6-20
NOTE: Please see QuickSpecs Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/10671_na/10671_na.html
HP Rack-Mountable R5500 UPS
HP R5500 VA UPS
NOTE: Please see QuickSpecs Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/11871_na/11871_na.html
HP Monitored Power Distribution Unit: Full Rack Version
HP 17.3 kVA S2324 Monitored PDU- dual input, 3Ø, 24A
HP 8.6 kVA S1324 Monitored PDU- single input, 3Ø, 24A
HP 16.6 kVA S2140 Monitored PDU- dual input, 1Ø, 40A
HP 8.3 S1140 Monitored PDU- single input, 1Ø, 40A
HP Monitored Power Distribution Unit: Half Rack Version
HP 17.3 kVA S348 Monitored PDU- single input, 3Ø, 48A
HP 4.9 kVA S124 Monitored PDU- single input, 1Ø, 24A
Modular Power Distribution Units 1U/0U (Up to 32 outlets)
NOTE: 1U/0U mounting brackets shipped with the unit (optimized for 10000 and
9000 series racks).
HP Modular Power Distribution Units (mPDU), Low Volt Model, 24A (100-127 VAC)
NOTE: This mPDU (252663-D71) may also be used to connect the low volt model of
the UPS R3000 XR.
HP Modular Power Distribution Units (mPDU), High Volt Model, 24A (200-240 VAC)
HP Modular Power Distribution Units (mPDU), High Volt Model, 40A (200-240 VAC)
NOTE: This mPDU (252663-B21), 40A model has a hardwired input.
HP Modular Power Distribution Units (mPDU), High Volt Model, 16A (200-240 VAC)
NOTE: This PDU has a detachable input power cord and allows for adaptability to
country specific power requirements.
NOTE: Please see the following Modular Power Distribution Unit (Zero-U/1U
Modular PDUs) QuickSpecs for additional options including shorter jumper cables
and specific power cords:
http://h18000.www1.hp.com/products/quickspecs/11041_na/11041_na.html
NOTE: For additional information on HP Power Distribution Units including
accessories please go to: www.hp.com/go/pdu.
DA - 13504
North America — Version 3 — December 18, 2009
AF419A
AF452A
AF453A
AF422A
AF423A
AF426A
AF503A
AF504A
AF505A
AF506A
AF916A
AF914A
252663-D71
252663-D72
252663-B21
252663-B24
Page 22
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Additional Options
HP Rack Series
HP Rack 5000 Series (Metallic Carbonite)
HP 5642 Rack-Unassembled
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12074_na/12074_na.html
NOTE: For additional information regarding Rack Cabinets, please see the following
URL: http://www.hp.com/go/rackandpower.
HP Rack 10000 Series (Graphite Metallic)
HP S10614 (14U) Rack Cabinet - Shock Pallet
NOTE: xxxxxx-B22 (shock pallet) used to ship racks with equipment installed (by
custom systems, VARs and Channels).
NOTE: It is mandatory to use a shock pallet in order to ship racks with equipment
installed.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/10995_na/10995_na.html
NOTE: For additional information regarding Rack Cabinets, please see the following
URL: http://www.hp.com/go/rackandpower.
HP Rack 10000 G2 Series (Graphite Metallic)
10642 G2 (42U) Rack Cabinet - Pallet
10642 G2 (42U) Rack Cabinet - Shock Pallet
10642 G2 (42U) Rack Cabinet 1200mm Deep - Pallet
10642 G2 (42U) Rack Cabinet 1200mm Deep - Shock Pallet
10642 G2 (42U) Rack Cabinet - Crated
10642 G2 (42U) Rack Cabinet, with Extension - Shock Pallet
10636 G2 (36U) Rack Cabinet - Pallet
10636 G2 (36U) Rack Cabinet - Shock Pallet
10636 G2 (36U) Rack Cabinet - Crated
10636 G2 (36U) Rack Cabinet, with Extension - Shock Pallet
10622 G2 (22U) Rack Cabinet - Pallet
10622 G2 (22U) Rack Cabinet - Shock Pallet
10842 G2 (42U) 800mm Wide Rack Cabinet - Pallet
10842 G2 (42U) 800mm Wide Rack Cabinet - Shock Pallet
10647 G2 (47U) Rack Cabinet - Pallet
10647 G2 (47U) Rack Cabinet 1200mm Deep - Pallet
10647 G2 (47U) Rack Cabinet 1200mm Deep - Shock Pallet
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12402_na/12402_na.html
NOTE: For additional information regarding Rack Cabinets, please see the following
URL: http://www.hp.com/go/rackandpower.
DA - 13504
North America — Version 3 — December 18, 2009
358254-B21
292302-B22
AF001A
AF002A
AF038A
AF034A
AF003A
AF004A
AF011A
AF012A
AF013A
AF014A
AF021A
AF022A
AF041A
AF042A
AF031A
AF045A
AF044A
Page 23
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Additional Options
HP Rack Options
Keyboards and Monitors
TFT7600 Rackmount Keyboard Monitor
1U Rackmount Keyboard with USB
NOTE: For additional information regarding Rack Options, please see the following
URL: http://www.hp.com/go/rackandpower.
HP KVM Switch Options
2x1x16 IP Console Switch with Virtual Media
4x1x16 IP Console Switch with Virtual Media
NOTE: Cat5e cables are required to connect Interface Adapters to Console Switches.
Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm.
HP 1x4 Console Switch
USB Server Console Cable, 6 ft, 2 pack
NOTE: For additional information regarding KVM switches, Serial Console servers,
rack mount monitors, keyboards and all related options please see the following URL:
http://www.hp.com/go/kvm.
HP Serial Console Server Options
Server console switch 0x2x8
Server console switch 0x2x16
HP 16 Port Serial Console Server
HP 48 Port Serial Console Server
Serial Adapter, RJ45-DB9 DCE Female, 1 Pack
Serial Adapter, RJ45-DB9 DCE Female, 8 Pack
NOTE: Cat5e cables are required to connect Serial Adapters to Serial Console
Servers. Additional Serial Adapters and Cat5e cables can be found at the following
URL: http://www.hp.com/go/kvm.
NOTE: For additional information regarding KVM switches, Serial Console servers,
rack mount monitors, keyboards and all related options please see the following URL:
http://www.hp.com/go/kvm.
USB Options
HP 1GB USB 2.0 Floppy Drive Key
Service and Support
Offerings
(HP Care Pack Services)
Hardware Services On-site Service
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
Hardware Services Next Business Day On-Site Service
9-Hour x 5-Day Coverage, 3 Years, Electronic
Installation Services
Hardware Services 6-Hour Call to Repair On-Site Service
Hardware Installation, Electronic
NOTE: For more information, customer/resellers can contact:
http://www.hp.com/hps/
DA - 13504
North America — Version 3 — December 18, 2009
AG052A
AG072A
AF601A
AF602A
AF611A
AF613A
AF616A
AF617A
AF101A
AF102A
AF103A
AF110A
442085-B21
UJ252E
UJ253E
UJ251E
UJ254E
UJ261E
Page 24
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Memory
HP ProLiant DL120 G6 Models
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
Standard Memory
SATA Models:
2GB of PC3-10600E DDR3 UDIMM running at 1333MHz with ECC capabilities memory installed.
SAS Models
4GB of PC3-10600R RDIMM running at 1333MHz
Standard Memory Plus Optional Memory
Up to 8 GB memory is available with the optional installation of 4 x 2GB PC3-10600E UDIMM ECC DDR3 SDRAM DIMM Memory
kits.
Up to 16GB memory is available with the optional installation of 4 x 4GB PC3-10600R RDIMM DDR3 SDRAM DIMM Memory kits
NOTE: The below chart does not represent all possible memory configurations.
NOTE: For best performance, it is recommended that customer installs memory in identical pairs (Slots 1 and 3 are interleaving pair.
Slots 2 and 4 are interleaving pair).
Some DIMM installation guidelines are summarized below:
For the HP ProLiant DL120 G6 server with six (6) memory slots
There are two (2) channels per server
There are three (3) DIMM slots for each memory channel; six (6) total slots
Memory channel 1 consists of the three (3) DIMMs that are closest to the processor
Memory channel 2 consists of the three (3) DIMMs that are furthest from the processor
Different processor (CPU) has different memory support
Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)
Do not install DIMMs if the processor(CPU) is not installed
It is not required, but it is recommended to load the channels similarly if possible
Support up to 4 DIMMs (2 DIMMs per channel) max 8GB PC3 10600E (DDR3 1333 MHz)
Support up to 4 DIMMs ( 2 DIMMs per channel) max 16GB PC3-8500R (DDR3-1066 MHz)
Support up to 6 DIMMs (3 DIMMs per channel) max 12GB PC3-10600R (DDR3-1333 MHz) Support single double and quad
ranks of DIMM
Populate DIMMs from heaviest load (double-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the CPU
No mixing DIMM voltage; all DIMMs must be the same voltage
The UDIMM installing sequence:
DIMM1E
1 DIMMs
Empty
2 DIMMs
Empty
4 DIMMs
Empty
DIMM2C
Empty
Empty
DIMM
DIMM3A
DIMM
DIMM
DIMM
DIMM4F
Empty
Empty
Empty
DIMM5D
Empty
Empty
DIMM
DIMM6B
Empty
DIMM
DIMM
The RDIMM installing sequence:
DIMM1E
1 DIMMs
Empty
2 DIMMs
Empty
4 DIMMs
Empty
6 DIMMs
DIMM
DIMM2C
Empty
Empty
DIMM
DIMM
DIMM3A
DIMM
DIMM
DIMM
DIMM
DIMM4F
Empty
Empty
Empty
DIMM
DIMM5D
Empty
Empty
DIMM
DIMM
DIMM6B
Empty
DIMM
DIMM
DIMM
DA - 13504
North America — Version 3 — December 18, 2009
Page 25
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Memory
Following are memory options available from HP:
Unbuffered with ECC DIMMs (UDIMM)
HP 2GB 2Rx8 PC3-10600E Kit
HP 1GB 1Rx8 PC3-10600E Kit
Registered DIMMs (RDIMM)
HP 2GB 2Rx8 PC3-10600R-9
HP 4GB 4Rx8 PC3-8500R-7 LP Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and
guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memoryconfigurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant energy efficient
features, see: www.hp.com/go/proliant-energy-efficient
DA - 13504
North America — Version 3 — December 18, 2009
500670-B21
500668-B21
500656-B21
500660-B21
Page 26
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Storage
1- 4
A
Four SATA or SAS drive bays
Optical Drive Bay: Optional DVD-ROM, or DVD-RW
drive
Drive Support
Removable Media
9.5mm IDE DVD-ROM or
DVD-RW Drive
Quantity
Supported
Position
Supported
Up to 1
A
Controller
Integrated 6 Port SATA Controller
NOTE: Transfer Rate: 3 Gb/s SATA.
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should
operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
SAS Hot Plug 3.5" Enterprise (ENT) Drives
Quantity
Position
Supported
Supported
Controller
450GB 3G SAS 15K DP
Up to 2
1-2
HP Smart Array P212 Controller
300GB 3G SAS 15K DP
146GB 3G SAS 15K DP
SAS Hot Plug 3.5" Midline (MDL) Drives
Quantity
Supported
1TB 3G SAS 7.2K DP
Up to 2
750GB 3G SAS 15K DP
Position
Supported
1-2
SAS Non-Hot Plug 3.5" Enterprise (ENT) Drives
Quantity
Position
Supported
Supported
450GB 3G SAS 15K DP
Up to 2
1-2
400GB 3G SAS 10K DP
300GB 3G SAS 15K DP
146GB 3G SAS 15K DP
DA - 13504
Controller
HP Smart Array P212 Controller
Controller
HP Smart Array P212 Controller
North America — Version 3 — December 18, 2009
Page 27
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Storage
SATA Non-Hot Plug 3.5" Midline (MDL) Drives
Quantity
Position
Supported
Supported
750GB 3G SATA 7.2K
Up to 2
1-2
500GB 3G SATA 7.2K
250GB 3G SATA 7.2K
SATA Non-Hot Plug 3.5" Entry (ETY) Drives
Position
Quantity
Supported
Supported
160GB 3G SATA 7.2K
Up to 2
1-2
3.5" SATA Non-Hot Plug Drives
Quantity
Supported
250GB 1.5G SATA 7.2K
Up to 2
160GB 1.5G SATA 7.2K
Position
Supported
1-2
Controller
6 Port SATA controller with Embedded RAID
NOTE: Transfer Rate: 1.5 Gb/s SATA.
Controller
6 Port SATA controller with Embedded RAID
NOTE: Transfer Rate: 1.5 Gb/s SATA.
Controller
6 Port SATA controller with Embedded RAID
NOTE: Transfer Rate: 1.5 Gb/s SATA.
External Storage
60 Modular Smart Array
Enclosure
70 Modular Smart Array
Enclosure
Quantity
Supported
Up to 8
Up to 8
Up to 4
Up to 4
Position
Supported
External
Host Controller or Adapter
HP Smart Array P411/256MB Controller
External
HP Smart Array P411/256MB Controller
Maximum Storage Capacity - (SAS drives)
Internal
1.8TB (4 x 450GB SAS)
External
6.30TB (1 x (14 x 450GB SAS))
Total
8.10TB
Maximum Storage Capacity - (SATA Drives)
Internal
3.0TB (4 x 750GB SATA)
External
9.0TB [1 x (12 x 750GB SATA)]
Total
11.0TB
NOTE: In order to implement integrated SATA RAID with Easy 'set-up CD' on Windows 2000/2003, the use of a floppy drive is
necessary.
Tape and Disk-Based Backup
NOTE: For a complete listing of compatible tape and disk-based backup offerings, please visit: www.hp.com/go/connect.
DA - 13504
North America — Version 3 — December 18, 2009
Page 28
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Storage
HP StorageWorks USB
Tape
DAT 72 USB
DAT 160 USB
1U USB Rack-Mount Kit
HP StorageWorks RDX
Removable Disk Backup
System
RDX160
RDX320
HP StorageWorks D2D
Backup Systems
D2D120
D2D130
D2D2503i
D2D2504i
Position
Supported
External
USB 2.0 Port
Controller Part
Number
N/A
External
USB 2.0 Port
N/A
External
Embedded Network Controller
N/A
DA - 13504
Controller
North America — Version 3 — December 18, 2009
Page 29
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Technical Specifications
System Unit
Dimensions (H x W x D)
(with bezel)
Weight
(approximate)
Input Requirements
(per power supply)
BTU Rating
Power Specifications
4.32 x 44.81 x 70.0 mm (1.69" x 17.64" x 27.56")
Maximum
(four hard drives, power
supply, and processor
installed)
Minimum
(one hard drive, power
supply, and processor
installed)
Range Line Voltage
31.49 lb (14.3kg)
28.2lb (12.8kg)
90 - 132 VAC,
180 - 264 VAC
Rated Input Current
6 A (at 100 VAC),
3 A (at 200 VAC)
Rated Input Frequency
47 to 63 Hz
Rated Input Power
<550W (at 100 VAC)
550W (at 200 VAC)
Maximum
1314 BTU/hr (at 100 VAC),
1314 BTU/hr (at 200 VAC)
To review typical system power ratings use the Power Advisor which is
available via the online tool located at URL: www.hp.com/go/proliantenergy-efficient or www.hp.com/go/hppoweradvisor
- Click on the system of interest. Example: DL120 G6
- Follow the instructions of the next screens.
Power Supply Output
Rated Steady-State Power 400 W (at 100 VAC),
(per power supply)
400 W (at 200 VAC)
Maximum Peak Power
430 W (at 100 VAC),
430 W (at 200 VAC)
System Inlet Temperature Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if operating
with a fan fault or above 30°C (86°F).
Non-operating
-30° to 65°C (-22° to 149°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Relative Humidity
Operating
10 to 90% relative humidity (Rh), 28°C (82.4°F)
(non-condensing)
maximum wet bulb temperature, noncondensing.
Non-operating
5 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature, noncondensing.
DA - 13504
North America — Version 3 — December 18, 2009
Page 30
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Technical Specifications
Altitude
Operating
Acoustic Noise
Emissions Classification
(EMC)
Power Supply
Input voltage
specifications
Input Specifications
BTU Rating
Ambient temperature
range
Relative humidity
(non-condensing)
Dielectric voltage
withstand
DA - 13504
3050 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500 ft/min).
Listed are the declared A-Weighted sound power levels (LWAd) and declared
average bystander position A-Weighted sound pressure levels (LpAm) when
the product is operating in a 23°C ambient environment. Noise emissions
were measured in accordance with ISO 7779 (ECMA 74) and declared in
accordance with ISO 9296 (ECMA 109).
Idle
LWAd
6.30 B
LpAm
44.1 dBA
Operating
LWAd
6.34 B
LpAm
44.4 dBA
Class A
FCC Rating
CISPR 22; EN55022; EN55024; FCC CFR 47,
Normative Standards
Pt 15; ICES-003; CNS13438; GB9254; EN
61000-3-2; EN 61000-3-3; EN 60950-1; IEC
60950-1
NOTE: Product conformance to cited product specifications is based on
sample (type) testing, evaluation, or assessment. This product or family of
products is eligible to bear the appropriate compliance logos and
statements.
Rated input voltage
100 VAC to 240 VAC
Rated input line
Frequency range
Rated input power
90 VAC to 264VAC
47 to 63 Hz
@ 115V input, Rated input power = 500W
(assume output wattage=400W
@ 230V input, Rated input power = 500W
(assume output wattage=400W)
6 A, 3 A (110 V, 220 V)
400W (rated)
Rated input current
Steady state power
1710 BTU/hr
Operating
Non-operating
Operating
Non-operating
Input to output
Input to ground
41° to 122° F (5° to 50° C)
-40° to 167° F (-40° to 75° C)
5% to 95%
5% to 95%
2150 VDC minimum, withstand 1 min
2150 VDC minimum, withstand 1 min
North America — Version 3 — December 18, 2009
Page 31
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Technical Specifications
Maximum Wet Bulb
Temperature
104° F (40° C)
Integrated Serial ATA
Controller
Simultaneous drive
4 channels
transfer channels
Transfer rate synchronous 150 MB/s per channel; 300 MB/s in RAID 0 pair
(maximum theoretical)
Intel® 82801IR Integrated Serial ATA Host Controller (non-RAID mode)
Data transfer method
Intel® 82801IR Integrated Serial ATA Host Controller (RAID Mode)
Serial ATA
Drive support
Legacy Mode
Data transfer modes
Combined Mode
Serial ATA
Protocol
NCQ (Native Command Queuing); AHCI (Advanced Host Controller
Feature
Interface)
0, 1
RAID levels supported
Supports multiple logical volumes
RAID Features
Setup through ROM based Array Configuration Utility
Installation scripting support
NOTE: This controller does not support Hot Plug functions or LED functions.
Microsoft Windows Server 2003
RAID OS Support
NOTE: In order to implement integrated SATA RAID with Smart Start 7.90 on
Windows 2000/2003, the use of a floppy drive is necessary.
Linux (Red Hat, SuSE, UnitedLinux)
Embedded HP NC107i
PCIe Gigabit Server
Adapter
Network Interface
Compatibility
Data Transfer Method
Network Transfer Rate
Connector
Cable Support
DA - 13504
10Base-T/
100Base-TX/
1000Base-TX
Combines a triple-speed IEEE 802.3TM - Compliant Media Access
Controller (MAC) with a triple-speed Ethernet transceiver.
IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
Four lane (x4), 100MHz PCI Express Reference Clock
10Base-T (Half-Duplex)
10 Mb/s
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX (Half-Duplex) 100 Mb/s
100Base-TX (Full-Duplex) 200 Mb/s
1000Base-TX (Half and
2000Mb/s
Full-Duplex)
RJ-45 connector
10Base-T
Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
10/100/1000Base-TX
Category 5 UTP; up to 328 ft (100 m)
North America — Version 3 — December 18, 2009
Page 32
QuickSpecs
HP ProLiant DL120 Generation 6 (G6)
Technical Specifications
Environment-friendly
Products and Approach
End-of-life Management
and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may
be used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2009 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation.
Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 13504
North America — Version 3 — December 18, 2009
Page 33