USER’S MANUAL MANUEL DE L’UTILISATEUR MANUAL DEL USUARIO LD-3255VX TABLE OF CONTENTS TABLE OF CONTENTS i English TABLE OF CONTENTS .................................................... i DIGITAL TELEVISION TRANSITION NOTICE .................. 1 AVISO RELATIVO A LA TRANSICIÓN A TELEVISIÓN DIGITAL ......................................................................... 1 IMPORTANT INFORMATION .......................................... 2 Warnings .................................................................... 2 NOTICES ................................................................... 3 FCC COMPLIANCE STATEMENT ............................... 4 IMPORTANT SAFETY INSTRUCTIONS ....................... 5 Circuit Overload ......................................................... 6 Power Cord Protection ................................................ 6 Ventilation .................................................................. 6 Safety: Lamp Disposal ................................................ 6 WARNINGS AND PRECAUTIONS ............................... 7 ANTENNA INSTALLATION SAFETY ............................ 8 Lightning .................................................................... 8 Power lines ................................................................ 8 CLEANING THE LED TV ............................................. 9 Dolby-Digital Notice .................................................... 9 PACKAGE CONTENTS ................................................. 10 CONTROL PANEL ........................................................ 11 TERMINALS ................................................................. 12 REMOTE CONTROL ..................................................... 13 REMOTE CONTROL OPERATION ................................ 14 INSTALLING THE REMOTE CONTROL BATTERIES .. 14 REMOTE CONTROL TRANSMISSION RANGE .......... 14 LED TV BASE .............................................................. 15 INSTALLING THE LED TV BASE .............................. 15 REMOVING THE LED TV BASE ................................ 16 ANTENNA CONNECTION ............................................. 17 OUTDOOR ANTENNA CONNECTION ....................... 17 CABLE TV (CTV/DTV) CONNECTION ....................... 17 TABLE OF CONTENTS English EXTERNAL DEVICE CONNECTIONS ............................ POWER CONNECTION ................................................ CONNECTING AC POWER ....................................... INITIAL SETUP ........................................................ BASIC OPERATIONS ................................................... TURNING THE POWER ON AND OFF ....................... ADJUSTING THE VOLUME ....................................... CHANGING CHANNELS ........................................... SELECTING THE INPUT SOURCE ............................ ADJUSTING THE DISPLAY FORMAT ........................ ADJUSTING THE LED BACKLIGHT .......................... SETUP MENUS ............................................................ SETUP MENU OPERATION ...................................... PICTURE ................................................................. AUDIO ..................................................................... VIEW MODE ............................................................. VIEW MODE (VGA) .................................................. TV PROGRAM .......................................................... SETTINGS ............................................................... WALL MOUNT OPTION ................................................ WALL MOUNT INSTALLATION REMINDERS ............. TROUBLESHOOTING ................................................... SPECIFICATIONS ........................................................ ii 18 20 20 20 21 21 21 22 22 23 23 24 24 25 29 32 32 34 38 49 49 50 53 DIGITAL TELEVISION TRANSITION NOTICE DIGITAL TELEVISION TRANSITION NOTICE For more information, call the FCC at 1-888-CALL-FCC (1-888-225-5322) or see www.DTV.gov. For information on the TV Converter program, and on government coupons that may be used toward the purchase of one, see www.dtv2009.gov, or call the NTIA at 1-888-DTV-2009. AVISO RELATIVO A LA TRANSICIÓN A TELEVISIÓN DIGITAL Este equipo incorpora un sintonizador de televisión digital, lo que le permitirá recibir una programación digital televisada por aire, con una antena adecuada, cuando se terminará la transmisión de alta potencia de la televisión analógica en los Estados Unidos el 12 de Junio de 2009. Ciertos receptores de televisión antiguos, si dependen de una antena de TV, necesitarán un conversor de TV para recibir por el aire una programación digital, pero seguirán funcionando como antes para otros usos (por ejemplo para ver emisoras de TV de baja potencia que todavía transmiten en analógico, para ver películas pregrabadas, o para utilizar sus videojuegos). Para obtener más información, llame FCC 1-888-CALL-FCC (1-888-225-5322) o refiérase a www.DTV.gov. Para toda información sobre el programa de conversores de TV, y acerca de los cupones del gobierno que se pueden usar para comprarlos, refiérase a www.dtv2009.gov, o llame al NTIA al 1-888-DTV-2009. 1 English This device contains a digital television tuner, so it should receive digital over the air TV programming, with a suitable antenna, after the end of full-power analog TV broadcasting in the United States on June 12, 2009. The nationwide switch to digital television broadcasting will be complete on June 12, 2009, but your local television stations may switch sooner. After the switch, analog-only television sets that receive TV programming through an antenna will need a converter box to continue to receive over-the-air TV. Watch your local stations to find out when they will turn off their analog signal and switch to digital-only broadcasting. IMPORTANT INFORMATION IMPORTANT INFORMATION Warnings To reduce the risk of fire or electric shock: English • Do not expose this product to rain or moisture. • Do not remove the rear cover. There are no user-serviceable parts inside. Refer all servicing requirements to qualified service personnel. • The plug should be connected to a mains socket outlet with a protective earthing connection. The lightning flash with arrowhead inside an equilateral triangle symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation inside an equilateral triangle symbol is intended to alert the user to related operating and maintenance instructions in the user documentation accompanying the product. WARNING! This device must be operated with the original power supply. WARNING! To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. CAUTION: The power supply outlet should be located near the LED TV and should be easily accessible. Always use the appropriate AC cord that is certified for your specific country. Some examples are listed below: • USA – UL • Canada – CSA • Japan – Electric Appliance Control Act 2 IMPORTANT INFORMATION NOTICES Important Notices Concerning Power Cord Selection Figure A1 Figure A2 For the United States and Canada In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL-listed, and CSA-labeled. For LED TVs that are to be placed on a desk or table, type SVT or SJT cord sets may be used. For LED TVs that are to be placed directly on the floor, only SJT type cord sets may be used. The cord set must be selected according to the current rating for the LED TV. Consult the table below for the selection criteria of power cords used in the United States and Canada. Cord Type SJT SVT Size of Conductor in Cord Maximum Unit Current Rating 10 Amps 18 AWG 16 AWG 12 Amps 14 AWG 12 Amps 18 AWG 10 Amps 17 AWG 12 Amps 3 English The specific power cord for this LED TV is enclosed and has been selected according to the country of destination. Use the enclosed power cord to prevent electric shock. Observe the following guidelines if it is necessary to replace the original cord set, or if there is no cord set enclosed. The female receptacle of the cord set must meet IEC-60320 requirements and should look like Figure A1 below: IMPORTANT INFORMATION FCC COMPLIANCE STATEMENT English This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and may cause harmful interference to radio communications if not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the distance between the LED TV and the receiver. • Connect the LED TV to an outlet on a circuit separate from to which the receiver is connected. • If the interference persists even after performing the above measures, consult the Westinghouse Service Center or an experienced radio/TV technician for assistance. FCC Warning To assure continued FCC compliance, use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores. If a BNC cable is used, use only a shielded BNC (5) cable. Also, any unauthorized changes or modifications not expressly approved by the manufacturer will void the user's authority to operate this device. 4 IMPORTANT INFORMATION IMPORTANT SAFETY INSTRUCTIONS Make sure to note and follow all warnings and instructions marked on the LED TV. Observe the following safety instructions. Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments/accessories specified by the manufacturer. • Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. • Unplug this apparatus during lightning storms or when unused for long periods of time. • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. English • 5 IMPORTANT INFORMATION Circuit Overload Do not overload wall outlets, extension cords, or power strips. This can result in a fire or electronic shock. English Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Periodically inspect the cords for damage. Install the LED TV near a wall socket outlet where the power cord can be readily accessed. Ventilation The slots and openings on the cabinet are provided for necessary ventilation. To ensure reliable operation of the LED TV and to protect it from overheating, these slots and openings must never be blocked or covered. Never cover the slots and openings with a cloth or other materials. Do not block the openings by placing the LED TV on a bed, sofa, rug or other similar surface. Do not place the LED TV in a built-in installation such as a bookcase or a rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. Safety: Lamp Disposal Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the electronic industries alliance at www.eiae.org. 6 IMPORTANT INFORMATION WARNINGS AND PRECAUTIONS • Do not orient the LED TV towards direct sunlight to reduce glare. • If the LED TV will not be used for a long period of time, unplug the unit and remove the batteries from the remote control. Avoid touching the display screen by hand or any object. • Never remove the rear cover. The LED TV interior contains high-voltage parts. You may be seriously injured if you touch them. • Always handle the LED TV with caution when moving it. • Do not install the LED TV in airtight compartments, or in areas where it can be exposed to water or high temperature. • Ensure that the area around the LED TV is clean and free of moisture. • Do not place anything on the LED TV that can hinder heat dissipation. • Do not place naked flame sources, such as lighted candles, on or near the LED TV. • Do not place anything on the LED TV that can cause liquid to splash on it (e.g. flower vase). • Do not place heavy objects on the LED TV, audio/video cables, or power cord. • If the LED TV emits smoke, abnormal noise, or a strange odor, immediately turn it off and contact the Westinghouse Service Center by: – Logging on to www.wde.com. – Contacting the Westinghouse Customer Service at (800) 701-0680. – E-mailing us at [email protected] English • 7 IMPORTANT INFORMATION ANTENNA INSTALLATION SAFETY Outdoor Antenna Grounding English If an outside antenna or cable system is connected to the LED TV, be sure the antenna or cable system is grounded to prevent voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANS/NFPA 70, provides information on proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. Antenna Grounding According to the National Electrical Code, ANSI/NFPA 70 Antenna lead in wire Grounding clamps Electric service equipment Antenna discharge unit (NEC Section 810-20) Grounding Conductors (NEC Section 810-21) Grounding clamps NEC: National Electrical Code Power service grounding electrode system (NEC Art 250 part H) Lightning Z Z Z For added protection for the LED TV during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. DO NOT disconnect the antenna or the power cord during a heavy storm—lightning may strike while you are holding the cable cord, causing serious injury. Turn off the LED TV and wait for the weather to improve. Power lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 8 IMPORTANT INFORMATION CLEANING THE LED TV Make sure the LED TV is turned off and the power cord is disconnected from the power outlet. • Never spray or pour any liquid directly onto the screen or the case. To clean the screen: 1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2 If it is still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. To clean the case: 1 Wipe the case with a soft, dry cloth. 2 If it is still not clean, apply a small amount of non-ammonia, non-alcohol based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface. Dolby-Digital Notice Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. 9 English • PACKAGE CONTENTS PACKAGE CONTENTS 32” LED TV Unit Remote Control (with 2x AAA batteries) C.C. ZZZ MTS English Favorite A B C ENT D Enter Input Vol Ch YPbPr1 HDMI1 Video1 TV YPbPr2 HDMI2 Video2 PC RMT-11 10 LED TV Base Quick Connect Guide Power Cord Warranty Card AC Adapter Warranty Brochure Screws for Base User Manual M4x18 *4pcs M5x16 *1pc Cover neck Base CONTROL PANEL CONTROL PANEL MENU 2 VOL 3 CH 4 INPUT English 1 5 R L AV 2 USB R L Item 1. MENU 2. Volume +/3. Channel +/4. INPUT 5. Power Description Displays the LED TV setup screen. • Adjusts the volume during playback. • Selects an item on a menu screen. • Switches the channel during TV viewing. • Selects an item on a menu screen. • Selects the video input source. • Executes a command on a menu screen. Toggles the power on and off. 11 TERMINALS TERMINALS English SPDIF 7 HDMI 1 1 2 3 4 5 8 6 HDMI 2 DC IN TUNER Item 1. DC in 2. TV tuner 3. Composite AV input 4. Audio in 5. VGA 6. Audio out 7. SPDIF audio out 8. HDMI 1/2 9. USB Service port 12 Y - L - R AUDIO IN VGA L - R USB 9 Function Connects the AC adapter from this outlet to a power source. Connects the LED TV to an antenna or cable service. Connect to an external AV device such as a VCR, DVD player, set-top box, or game system. Connects to the audio out port of a computer. Connects to a computer or other device with a VGA output using a 15-pin VGA cable. Connect to an audio output device. Connects to an external digital audio receiver. Connects to an external AV device such as a VCR, DVD player, set-top box, or game system. For service only. REMOTE CONTROL REMOTE CONTROL Item 3 5 ZZZ C.C. MTS Favorite Toggles the TV power on or off. 3. Backlight 9 11 9. Enter ENT Adjusts the LED screen backlight. Toggles the Multichannel Television Sound options. Toggles the closed caption display on or off. Sets the sleep timer for the LED TV to turn off automatically. Use to key in the channel number. Switches to the favorite channels (for details on how to save a new favorite channel, see page 22). Executes a channel entry. 12 10. Menu Accesses the LED TV setup menus. 13 11. Return 12. Arrow keys 13. Enter Switches to the last selected channel. Navigate through the on-screen menus. Executes a command. Displays the Electronic Program Guide (EPG). It contains the program information for the channel you’re watching. Displays the input source or channel information as well as the system date and time. Selects the video input source. Ajusts the system volume. Switches to other TV channels. 2 4. MTS 4 6 5. CC A 6. Sleep zZz B 8 7 2. Power 7. Channel keys C ENT 8. Favorite D 10 Enter 14 15 16 Input 17 20 22 24 26 Vol 18 Ch YPbPr1 HDMI1 Video1 TV YPbPr2 HDMI2 Video2 PC 19 21 23 25 27 14. G 15. Info RMT-11 16. Input 17. Vol +/18. Ch / 19. Aspect ratio 20. YPbPr1 21. TV 22. HDMI1 23. Video1 24. 25. 26. 27. YPbPr2 PC HDMI2 Video2 Selects the video display format. Selects VGA-Component as the input source. Selects TV or HDTV as the input source. Selects HDMI1 as the input source. Selects the Composite AV device as the input source. Not supported. Selects VGA as the input source. Selects HDMI2 as the input source Not supported. 13 English 1 1. Mute Description Mutes the sound. Press again to toggle the sound back on. REMOTE CONTROL OPERATION REMOTE CONTROL OPERATION INSTALLING THE REMOTE CONTROL BATTERIES English CAUTIONS: • Only use AAA batteries. • Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal injury. • Insert batteries according to the (+) and (-) markings. Inserting the batteries incorrectly may result in cracking or leakage, which may pose a risk of fire or lead to physical injury. • Dispose of used batteries in accordance with local laws and regulations. • Keep batteries away from children and pets. • When the remote control will not to be used for an extended period, remove the batteries. 1 Remove the battery cover. 2 Insert the batteries. Make sure the (+) and (–) marks on the batteries match those inside the compartment. 3 Re-attach the battery cover. REMOTE CONTROL TRANSMISSION RANGE Transmission range depends upon the reception angle. The range of coverage is 20° horizontal/vertical at a distance of 10 feet from the LED TV. C.C. ZZZ MTS Favorite A B 14 LED TV BASE LED TV BASE INSTALLING THE LED TV BASE 1 Open the LED TV carton box. 2 Remove the LED TV base. 3 Remove the plastic bag. 4 Remove the two top carton stabilizers from the LED TV. 5 Remove the protective plastic covering the LED TV. 6 Grasp the two sides of the LED TV and then pull it out of the carton box. 7 Remove the two bottom carton stabilizers from the LED TV. 8 Lay the LED TV on a clear, flat, and stable surface. 9 Align the base to the bottom side of the LED TV and use four M4 x 18 screws to secure it. 10 Carefully orient the LED TV in an upright position. 11 Use one M5 x 16 screw to fix the stand base and LED TV on the desk. 15 English CAUTION: The LED TV unit may be too heavy for one person to lift. If this is the case, make sure to ask for assistance in handling the LED TV to prevent physical injury and/or damage to the unit. LED TV BASE REMOVING THE LED TV BASE If you intend to repack the LED TV unit (for shipping or storage) or you want to change the installation to a wall mount option, you must first remove the LED TV base. English 1 Turn off the LED TV and all connected devices. 2 Disconnect the power cord from the LED TV. 3 Disconnect all signal cables from the I/O port terminals. 4 Remove the M5 x 16 screw securing the base to the desk. 5 Lay the LED TV on a clear, flat, and stable surface. 6 Remove the screws securing the base to the LED TV. 7 Detach the base from LED TV. 8 Pack the screws you removed in step 5 together with the LED TV base for future reassembly. 16 ANTENNA CONNECTION ANTENNA CONNECTION OUTDOOR ANTENNA CONNECTION 75 ohm coaxial cable (round) 300 ohm twin-lead (flat) RF IN 300-75 ohm ADAPTER (Not supplied) Separate VHF/UHF Antenna VHF Antenna UHF Antenna Home Antenna terminal (75 ohm) 300 ohm twin-lead COMBINER (Not supplied) 300 ohm twin-lead IN OUT 75 ohm coaxial cable NOTE: The F-type connector should be finger-tightened only. When connecting the RF cable to the LED TV, do not tighten F-type connector with any tool. If tools are used, it may cause damage to the LED TV (e.g. breaking of internal circuit). CABLE TV (CTV/DTV) CONNECTION The unit has a TV tuner (75 ohm coaxial cable connector) located on the rear I/O panel for easy cable hookup. When connecting the 75 ohm coaxial cable to the unit, screw the 75 ohm cable to the TV tuner. Some cable TV companies offer premium pay channels. Since the signals of these channels are scrambled, a cable TV converter/descrambler is usually provided to the subscriber by the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled channels. (Set your TV to channel 3 or 4. Typically one of these channels is used. If a channel is unknown, consult your cable TV company.) For more specific instructions on installing cable TV, consult your cable TV company. One possible method of utilizing the converter/descrambler provided by your cable TV company is explained below. 17 English Cable TV lead in VHF, UHF or VHF/UHF combination antenna EXTERNAL DEVICE CONNECTIONS • A position on the RF switch (not supplied) – You can view all unscrambled channels by using the TV's channel keys. • B position on the RF switch (not supplied) – You can view the scrambled channels via the converter/descrambler by using the converter's channel keys. English RF switch (not supplied) OUT Two-set signal splitter (Not supplied) A IN B Cable TV line Cable TV converter/descrambler (Not supplied) EXTERNAL DEVICE CONNECTIONS IMPORTANT: • Turn off the LED TV first before connecting an external device to prevent any possible damage or physical injury. • For more information about external device connections, see the operation manual of the external device you wish to connect to the LED TV. • Make sure that the correct cables are connected to each terminal. Improper cable connections may cause damage to the LED TV. You can enjoy picture and sound by connecting various audio-video devices to the terminals located on the rear and side I/O panels of the LED TV. • TV cable input – You can use a commercially available audio/video cable. • Component (YPbPr) input – Picture can be displayed only when a 480i, 480P, 720P or 1080i signal is received. • HDMI input – Picture can be displayed only when a 640 x 480, 480P, 720P or 1080i signal is received. When you connect to the HDMI terminal with a DVI-HDMI conversion cable, there is a possibility that the picture may not display correctly. • Audio output – You can output audio signals from the LED TV set through the analog audio out and SPDIF terminals. 18 EXTERNAL DEVICE CONNECTIONS The following diagram shows the external device connections. PC Audio amplifier AUDIO OUT Antenna cable / Cable TV line 3.5 mm stereo mini jack cable RGB cable English Antenna / Cable system AUDIO OUT Audio cable SPDIF SPDIF cable HDMI 1 HDMI 2 DC IN TUNER Y - L - R AUDIO IN VGA L - R USB Composite AV cable AC adapter DVD player with an HDMI terminal HDMI-HDMI cable Home video game system VCR Camcorder Power outlet DVI-HDMI cable DVD player Digital TV tuner DVD player with a DVI terminal 19 POWER CONNECTION POWER CONNECTION CONNECTING AC POWER English IMPORTANT: The LED TV is designed to be powered via an AC adapter. Use ONLY the AC adapter included in the package. Turn off all connected devices before plugging the AC adapter into the power outlet. Connect the power cord of the AC adapter to the LED TV then to a proper AC outlet. INITIAL SETUP Press on the control panel or on the remote control to turn on the LED TV. Select the desired language and select Yes to use the SetupWizard. The SetupWizard will guide you on how to set up the LED TV’s operational settings. MENU VOL CH INPUT C.C. ZZZ MTS Favorite A B 20 BASIC OPERATIONS BASIC OPERATIONS TURNING THE POWER ON AND OFF Turning on the power on the control panel or on the remote control to turn on the LED TV. Turning off the power Press on the control panel or on the remote control to turn off the LED TV. The LED behavior will depend on the enabled Power settings. MENU LED indicator VOL Turns from none to red. Turn the power on. Operation CH Turns from red to none. Turn the power off. INPUT C.C. ZZZ MTS Favorite A B NOTES: • If you are not going to use the TV for a long time, be sure to disconnect the power cord from the wall outlet and remove the batteries from the remote control. • In standby mode, a small amount of electricity is still consumed even when the power is turned off. ADJUSTING THE VOLUME Volume Mute Press Vol+ to increase the volume; press Volto decrease the volume. Z Z Z C.C. MTS Favorite Input Volume Vol YPbPr1 Ch HDMI1 Video1 TV Mute Press to turn off the sound. The mute icon appears on the screen. Press again to turn on the sound. 21 English Press BASIC OPERATIONS CHANGING CHANNELS Follow the instructions below to change channels. Using the Ch / Buttons English Browse channels Input Vol YPbPr1 Ch HDMI1 Video1 TV To browse through the available channels, press Ch the remote control or on the control panel. / on Using the Channel Keys Favorite A B C ENT D Selecting channel To change to a certain channel, key in the channel number using the channel keys and press ENT. Selecting digital channel To select a digital channel, key in the digital channel number using the channel keys and the • key, then press ENT. Using the Favorite Keys C.C. ZZZ MTS Favorite A B C ENT Selecting favorite channels To select a favorite channel, press the Favorite button (A, B, C, or D) corresponding to the preferred channel. Saving a channel as a favorite D 1 Switch to the channel you want to add as a favorite. 2 Press and hold the Favorite button which you want to add the current channel to for 3 seconds. 3 The Channel Saved message appears to confirm the new favorite channel item. SELECTING THE INPUT SOURCE There are two ways to select the video input source. Using the Individual Input Keys TV, PC, Video, YPbPr, HDMI Keys YPbPr1 HDMI1 Video1 TV YPbPr2 HDMI2 Video2 PC 22 Press any of the following remote control keys to change the input source: TV, PC, Video1, Video 2, YPbPr1, YPbPr2, HDMI1, or HDMI2. BASIC OPERATIONS Using the Input Key Select source using Input Key Input Vol YPbPr1 Ch HDMI1 Video1 1 Press Input. TV 2 A list of supported video sources is displayed. 4 Press / English 3 Press to select the preferred source. to switch to the selected input source. ADJUSTING THE DISPLAY FORMAT The input source can sometimes affect the way images are displayed on-screen. You can adjust the display format to view the image properly. Format Options Input Vol Ch YPbPr1 HDMI1 Video1 TV YPbPr2 HDMI2 Video2 PC Press repeatedly to toggle the display format. As you toggle each option on, the actual display will change accordingly. The available options are: • Standard: Picture is displayed in its original size. • Fill: Picture is displayed to cover the entire screen. • Overscan: Picture is scaled down to fit the display area. • 1:1 Mode: Matches the incoming resolution exactly to the pixels without any scaling. ADJUSTING THE LED BACKLIGHT Different viewing conditions can affect the quality of the display. You can adjust the LED backlight to suit the current viewing condition. C.C. ZZZ Backlight options MTS Favorite A Press repeatedly to toggle the Backlight mode. The available options are: Bright Room, Medium Room, and Dark Room. 23 SETUP MENUS SETUP MENUS SETUP MENU OPERATION Use the setup menus to configure the various operational settings of the LED TV. English Displaying the setup menu screen Press on the remote control or MENU on the control panel to display the setup menu screen. Navigating the setup menu screen Use the buttons on the remote control or on the control panel to navigate through the menu screens. MENU VOL SPDIF HDMI 1 HDMI 2 CH Enter USB DC IN TUNER Y - L - R AUDIO IN VGA L - R INPUT Action Displays or closes the menu bar. • Select and display a primary menu. • • Adjust sub-menu options. Select and display a sub-menu. • Select a sub-menu or a submenu option. Returns to the primary menu tab from a sub-menu screen. • • Returns to the previous screen. Applies the selected menu setting. 24 Remote Control Control Panel MENU / / then then Volume +/- then INPUT Channel +/- then INPUT MENU INPUT SETUP MENUS PICTURE Use the Picture sub-menus to configure the display quality. Brightness Use Brightness to adjust the luminance level. Brightness Adjusting Brightness 1 Use the / 2 Press the 3 Press keys to select Brightness and press / . keys on the remote control to adjust the brightness level. to save and exit the screen. Contrast Use Contrast to adjust the brightness to darkness ratio. Contrast Adjusting Contrast 1 Use the / 2 Press the 3 Press keys to select Contrast and press / . keys on the remote control to adjust the contrast level. to save and exit the screen. 25 English Press on the remote control or MENU on the control panel to display the setup menu screen then select Picture to display the Picture sub-menu. The following options are available: Brightness, Contrast, Saturation, Video Presets, Sharpness, Color temperature, Hue, and Reset. SETUP MENUS Saturation Use Saturation to adjust the color intensity. English Saturation Adjusting Saturation 1 Use the / 2 Press the 3 Press keys to select Saturation and press / . keys on the remote control to adjust the saturation level. to save and exit the screen. Video Presets Use this sub-menu to select one of four preset view options optimized for different viewing conditions. Video Presets Showroom Movie Game Sports Custom The following options are available: • Showroom: Uses increased color and sharpness for a vibrant picture display. • Movie: Images are displayed as accurately near to its original recording condition. • Game: Uses increased brightness and response time level for enjoying video games. • Sports: Uses high contrast display for clear-cut images ideal for viewing sports events. • Custom: Uses the customized settings. 26 SETUP MENUS Adjusting Video Presets 1 Use the / 2 Press the / . keys on the remote control to select the desired option. to save and exit the screen. English 3 Press keys to select Video Presets and press Sharpness Use Sharpness to adjust the sharpness or softness of the display. Sharpness Adjusting Sharpness 1 Use the / 2 Press the 3 Press keys to select Sharpness and press / . keys on the remote control to adjust the sharpness level. to save and exit the screen. Color Temperature Use Color temperature to adjust the level of white balance in the display. Color Temperature Warm Neutral Cool Three settings are available: • Warm: Pictures appear more reddish. • Neutral: Pictures appear more white. • Cool: Pictures appear with a bluish tint. 27 SETUP MENUS Adjusting Color Temperature 1 Use the / 2 Press the English 3 Press keys to select Color temperature and press / . keys on the remote control to select the desired option. to save and exit the screen. Hue Use Hue to adjust the balance of the red, green, and blue colors in the display. Hue Adjusting Hue 1 Use the / 2 Press the 3 Press keys to select Hue and press / . keys on the remote control to adjust the hue level. to save and exit the screen. Reset Select Yes on this sub-menu to reset all display-related settings. Reset NOTE: The configuration settings for the Picture sub-menus will only be applied to the current input source. 28 SETUP MENUS AUDIO Use the Audio sub-menus to configure the audio quality. These settings apply to the LED TV speakers only. Any connected audio devices are not affected. Bass Use Bass to calibrate low-pitched sounds. Bass Adjusting Bass 1 Use the / 2 Press the 3 Press keys to select Bass and press / . keys on the remote control to adjust the bass level. to save and exit the screen. Treble Use Treble to calibrate high-pitched sounds. Treble Adjusting Treble 1 Use the / 2 Press the 3 Press keys to select Treble and press / . keys on the remote control to adjust the treble level. to save and exit the screen. 29 English Press on the remote control or MENU on the control panel to display the setup menu screen then select Audio to display the Audio sub-menu. The following options are available: Bass, Treble, Balance, TV Speaker, Audio Presets, and Reset. SETUP MENUS Balance Use Balance to adjust the sound balance between the L/R speakers. English Balance Adjusting Balance 1 Use the / 2 Press the 3 Press keys to select Balance and press / . keys on the remote control to adjust the balance level. to save and exit the screen. TV Speaker Use this sub-menu to toggle the LED TV speakers on and off. TV Speaker ON OFF Adjusting TV Speaker 1 Use the / 2 Press the 3 Press 30 keys to select TV Speaker and press / . keys on the remote control to select ON or OFF. to save and exit the screen. SETUP MENUS Audio Preset Use this sub-menu to select one of four preset audio options optimized for different sounding conditions. English The following options are available: • Rock: Sets the equalizer to the Rock mode. • Pop: Sets the equalizer to the Pop mode. • Classical: Sets the equalizer to the Classical mode. • Flat: Sets the equalizer to the Flat mode. • Custom: Uses the customized settings. Adjusting Audio Preset 1 Use the / 2 Press the 3 Press keys to select Audio Preset and press / . keys on the remote control to select the desired option. to save and exit the screen. Reset Select Yes on this sub-menu to reset all audio-related settings. Reset 31 SETUP MENUS VIEW MODE Use the View Mode sub-menu to select the aspect ratio of the display. English Press on the remote control or MENU on the control panel to display the setup menu screen then select View Mode to display the View Mode sub-menu. The following options are available: Standard, Fill, Overscan, and 1:1 Mode. View Mode 1:1 Mode Standard Fill Overscan Standard Picture is displayed in its original size. Fill Picture is displayed to cover the entire screen. Overscan Picture is scaled down to fit the display area. 1:1 Mode Matches the incoming resolution exactly to the pixels without any scaling. Adjusting View Mode 1 Press the 2 Press or / keys on the remote control to select the desired option. to save and exit the screen. VIEW MODE (VGA) Select VGA as your input source and use the View Mode sub-menu to adjust the display in VGA mode. Press on the remote control or MENU on the control panel to display the setup menu screen then select View Mode to display the View Mode sub-menu. The following options are available: Aspect Ratio, H. Position, V. Position, Fine Tune, and Auto Sync. Aspect Ratio Use this sub-menu to select the display's aspect ratio in the following options: 32 SETUP MENUS • 1:1 Mode: Matches the incoming resolution exactly to the pixels without any scaling. • Standard: Picture is displayed in its original size. • Fill: Picture is displayed to cover the entire screen. English H. Position Use this sub-menu to adjust the horizontal position of the display. A 16:9 H. Position V. Position Use this sub-menu to adjust the vertical position of the display. A 16:9 V. Position Fine Tune Use this sub-menu to fine tune the display. A 16:9 Fine Tune Auto Sync Use this sub-menu to synchronize the display automatically. 16:9 A Auto Sync 33 SETUP MENUS TV PROGRAM Use the TV Program sub-menus to manage the channel list, language sound, and to scan for available TV channels in your area. English Press on the remote control or MENU on the control panel to display the setup menu screen then select TV Program to display the TV Program sub-menu. The following options are available: Skip List, Channel Edit, MTS, Auto Search, and Manual Add. Skip List Use Skip List to select the channels you want to skip. Channel Skip List Clear List 11.0 13.0 16.1 17.0 21.0 22.0 23.0 24.0 :Select Enter: Confirm Menu: Exit Adding Channels to Skip List 1 Use the / keys to select Skip List and press List screen appears. 2 Use the / . The Channel Skip keys to select the desired channel. 3 Press repeatedly to check (add to the Skip list) or uncheck (clear to the Skip list) the channels. 4 Repeat steps 2 and 3 to add more channels. 5 Press 34 to save and exit the screen. SETUP MENUS Channel Edit Use Channel Edit to assign a name to a channel. Channel Name Edit English 11.0 13.0 16.1 17.0 21.0 22.0 23.0 24.0 :Select Enter: Confirm Menu: Exit Editing Channel Names 1 Use the / keys to select Channel Edit and press Name Edit screen appears. . The Channel 2 Use the / keys to select the desired channel and press the Edit Name screen. 3 Use the press the / to open / / keys to move the cursor to the desired symbol and button to enter. • Select Shift to toggle different symbol tables: uppercase and lowercase letters, numerals, and special symbols. • Select Back to backspace. • Select Clear to delete all typed text. 4 Select Accept when finished. 5 Repeat steps 2, 3, and 4 to add more channels. 6 Press to save and exit the screen. 35 SETUP MENUS MTS Use MTS to select multichannel television sound. English The following options are available: • Mono: Allows mono output (useful when stereo is noisy or inconsistent). • Stereo: Allows stereo sound for superior TV viewing experience. • SAP: Allows second audio program from the speakers while watching a scene in the original program. Adjusting MTS 1 Use the / 2 Press the 3 Press keys to select MTS and press / . keys on the remote control to select the desired option. to save and exit the screen. Auto Search Select Auto Search and press . Two options are available: • Cable: Choose this setting if you are receiving TV channels with a CATV (cable TV). • AIR: Choose this setting if you are receiving TV channels with an antenna (over the air). Auto Search automatically creates a list of receivable channels for the selected source. 36 SETUP MENUS Manual Add Use Manual Add to add channels manually. Channel Add English _ Enter :Select Enter: Confirm Menu: Exit Adding Channels Manually 1 Use the / keys to select Manual Search and press Add screen appears. . The Channel 2 Use the Channel keys on the remote control to enter the channel number and select Enter. Wait a few moment for the TV to search for the channel. 3 When the channel is found, you can select Add to add to channel. 37 SETUP MENUS SETTINGS Use the Settings sub-menus to configure the LED TV operational setup and view the current firmware version. English Press on the remote control or MENU on the control panel to display the setup menu screen then select Settings to display the Settings sub-menu. The following options are available: Date and Time, Closed Captions, Parental Control, OSD Timeout, OSD Language, Power settings, Reset All, and Version. Date and Time Use Date and Time to adjust the current date and time. Date and Time Date Day of Week JAN 1, 2009 Time Zone Thursday Current Time Eastern (UTC-5) 10:54 AM Adjust for Daylight Saving Time Auto Calibration :Select Enter: Confirm Menu: Exit Adjusting Auto Calibration 1 Use the / keys to select Date and Time and press . 2 Press repeatedly to check (enable) or uncheck (disable) Auto Calibration. 3 Press to save and exit the screen. • Enable this option to view the system’s current time. • Both Date and Current Time are unavailable for adjustments when Auto Calibration is enabled. Adjusting Time Zone 1 Use the 2 Use the / keys to select Date and Time and press / keys to select Time Zone and press . . 3 Use the / keys to select the desired Time Zone: Samoa, Hawaii, Alaska, Pacific, Mountain, Central, Eastern, Atlantic, or Newfoundland. 4 Press 38 to save and exit the screen. SETUP MENUS Adjusting Date and Time 1 Use the / 2 Use the / / 4 Use the 5 Press . keys to select Date or Current Time and press . keys to select a date or time segment. / English 3 Use the keys to select Date and Time and press keys to adjust the value. to save and exit the screen. Adjusting Daylight Saving 1 Use the / keys to select Date and Time and press . 2 Press repeatedly to check (enable) or uncheck (disable) Adjust for Daylight Saving Time. 3 Press to save and exit the screen. Closed Captions Use Closed Captions to configure the settings for closed captioning in TV programs. Closed Captions Closed Captions Analog Type Digital Type Font ON CC1 CS1 As Broadcaster Size As Broadcaster Font Color As Broadcaster Background Color As Broadcaster :Select Menu: Exit The following options are available: • Closed Captions: Can be set to ON or OFF. • Analog Type: Can be set to CC1,CC2, CC3, CC4, T1, T2, T3, or T4. • Digital Type: Can be set to CS1, CS2, CS3, CS4, CS5, or CS6. • Font: Can be set to As Broadcaster, Style 1, Style 2, Style 3, Style 4, Style 5, Style 6, or Style 7. • Size: Can be set to As Broadcaster, Small, Medium, or Large. 39 SETUP MENUS • Font Color: Can be set to As Broadcaster, Black, White, Green, Blue, Red, Cyan, Yellow, or Magenta. • Background Color: Can be set to As Broadcaster, Black, White, Green, Blue, Red, Cyan, Yellow, or Magenta. English Adjusting Closed Captions Settings 1 Use the / 2 Use the 3 Use the 4 Press keys to select Closed Captions and press / / . keys to select the desired Closed Captions option. keys to adjust the value. to save and exit the screen. Parental Control Use Parental Control to block channels and change the password. You must enter a six-digit password to use the Parental Control. The factory password is 999999. Enter Password 0~9: Key in password Enter: Confirm Menu: Exit After you enter the correct password, the Parental Control menu is shown. By default, only the Rating and Change Password submenu are displayed. To display the hidden submenu, set Rating to ON. The following options are available: • • Rating: Select ON/OFF to hide or display the hidden submenu. Block Unrated: Select ON/OFF to block/unlock all unrated programs. Adjusting Rating and Block Unrated 1 Use the / keys to select Rating or Block Unrated and press 2 Use the / keys to select ON or OFF. 3 Press 40 to save and exit the screen. . SETUP MENUS • TV Rating: Use this sub-menu to customize US TV Rating programs. English Rating TV-Y TV-Y7 TV-G TV-PG Description Suitable for young children. May not be suitable for children under 7. Suitable for all audiences. Parental guidance suggested. Parental guidance suggested for children under 14. Suitable for mature audiences only; may be unsuitable for children under 17. Fantasy violence, combative situations. Suggestive dialogue. L Coarse language. Sexual situations. Violence. TV-14 TV-MA FV D L S V Adjusting TV Rating 1 Use the / keys to select TV Rating and press . 2 Use the / / / keys to select the desired rating and press repeatedly to block or unblock. You can also select Lock All to block all or Unlock All to unblock all. 3 Press to save and exit the screen. 41 SETUP MENUS • MPAA Rating: Use this sub-menu to select the ratings of allowable movies. English Rating G PG PG-13 R NC-17 X Description Contains nothing most parents will consider offensive for even their youngest children to see or hear; suitable for young children. May contain some material parents might not like to expose to their young children-material that will clearly need to be examined or inquired about before children are allowed to view the film. May contain some scenes of drug use; use of one of the harsher sexually-derived words may be heard. May be inappropriate for preteens. May contain some adult material. Parents are urged to learn more about the film before letting their children view it. May contain explicit sex scenes, an accumulation of sexuallyoriented language, and/or scenes of excessive violence. Suitable for adult audiences only. Rating does not signify that the film is obscene or pornographic. Contains extreme violence or explicit sex; suitable for adult audiences only. Adjusting MPAA Rating 1 Use the / keys to select MPAA Rating and press . 2 Use the / / / keys to select the desired rating and press repeatedly to block or unblock. 3 Press 42 to save and exit the screen. SETUP MENUS • Canada English: Use this sub-menu to select the classification categories (based on Canadian ratings) of allowable TV programs and movies. English Rating E C C8+ G PG 14+ 18+ Description Exempt shows Suitable for viewing by children of all ages. Not suitable for children under 8 years of age. Suitable for general audiences. Parental guidance advised. Suitable for people 14 years of age or older. Suitable for people 18 years of age or older. Adjusting Canada English Rating 1 Use the / keys to select Canada English Rating and press . 2 Use the / / / keys to select the desired rating and press repeatedly to block or unblock. 3 Press to save and exit the screen. 43 SETUP MENUS • Canada French: Use this sub-menu to select the ratings of allowable TV programs and movies. These ratings are based on the classification categories determined by La Régie du cinéma du Québec. English Rating E G 8 ans + 13 ans+ 16 ans+ 18 ans+ Description Exempt shows For general audiences. Not suitable for children under years of age. Not suitable for persons under years of age. Not suitable for persons under years of age. Not suitable for persons under years of age. 8 13 16 18 Adjusting Canada French Rating 1 Use the / keys to select Canada French Rating and press 2 Use the / / / keys to select the desired rating and press repeatedly to block or unblock. 3 Press 44 to save and exit the screen. . SETUP MENUS • Channel Block: Channel Block allows you to block channels. 11.0 English 13.0 16.1 17.0 21.0 22.0 23.0 Adjusting Channel Block 1 Use the / keys to select Channel Block and press . 2 Use the / keys to select the desired channel and press repeatedly to block or unblock. 3 Press • to save and exit the screen. Change Password: Change Password allows you to change your current password. Changing Password 1 Use the / keys to select Change Password and press . 2 Use the Channel keys to enter the current password and press 3 Use the Channel keys to enter the new password and press . . 4 Use the Channel keys to enter the new password again for confirmation and press . 5 Press to save and exit the screen. 45 SETUP MENUS OSD Timeout Use OSD Timeout to adjust the OSD duration on the screen: 10 sec, 20 sec, or 30 sec. English en OSD Timeout 10 sec 20 sec 30 sec Adjusting OSD Timeout 1 Use the / 2 Press the sec. 3 Press keys to select OSD Timeout and press / . keys on the remote control to select 10 sec, 20 sec, or 30 to save and exit the screen. OSD Language Use OSD Language to select the language to display on the screen: English, French, or Spanish. en OSD Language English French Spanish Adjusting OSD Language 1 Use the / 2 Press the Spanish. 3 Press 46 keys to select OSD Language and press / . keys on the remote control to select English, French or to save and exit the screen. SETUP MENUS Power Settings Use this sub-menu to configure power-related settings for the LED TV. English The following options are available: • VGA port -DPMS: Use this setting to enable or disable VGA port -DPMS. • Backlight: Use this setting to select the backlight mode: Bright Room, Medium Room, or Dark Room. • Dynamic Contrast: Use this setting to enable or disable Dynamic Contrast. Adjusting Power Settings 1 Use the / 2 Use the 3 Use the 4 Press keys to select Power Settings and press / / . keys to select a desired option. keys to adjust the value. to save and exit the screen. Reset All Select Yes on this sub-menu to reset all LED TV operational settings. Do this only if any of the following conditions occurs: • The system fails to respond to the remote control (ensure that the remote control batteries are still working and you are within the transmission range). • The new configuration settings cause unexpected results. • You forget the system PIN. en Reset All 47 SETUP MENUS Version Use this sub-menu to view the LED TV’s serial number and firmware version. en English Version 48 WALL MOUNT OPTION WALL MOUNT OPTION The LED TV has been fitted with VESA FPMPMI compliant mounting holes. These 200 x 100 mm mounting holes allow the unit to be mounted on a wall. Use the four M4 x L10 mm screws to wall mount the LED TV. English WALL MOUNT INSTALLATION REMINDERS • Remove the LED TV base first before mounting the unit on a wall. • It is the user's responsibility to use a UL listed wall mount unit rated to support the weight of this LED TV. • Please consult qualified contractors for wall mount installation. CAUTION: The incomplete or improper mounting of this unit to a wall may cause it to fall down resulting to property damage and/or potentially serious injury. 49 TROUBLESHOOTING TROUBLESHOOTING English Problem Corrective Action • Make sure the power indicator is illuminated blue. • Make sure the power cord is securely connected to the AC-in jack and is plugged into a functional AC outlet. You may want to plug in another electrical device to the power outlet to verify that it is supplying the proper voltage. No power Power is suddenly turned off. Forgotten PIN Make sure the sleep timer is turned off. Use Reset All in Settings menu to reset your password. • Press only one button at a time. Remote control does not work. • Make sure the batteries are properly inserted. • Remote control code cannot be detected by a universal remote. • The batteries may already be drained out. Replace batteries with new ones. Purchase a separate learning remote control. • Go to www.wde.com for a list of remote codes. • Make sure the video input cable is properly connected to the correct terminal, and that the correct input mode is enabled. To illustrate, when a VGA cable is connected to display a computer screen, the PC input mode must be enabled. • Verify that the antenna is properly connected and that the preferred channel is enabled in the channel list. Press and select Channels/Channel List. • Adjust the display settings. No picture 50 TROUBLESHOOTING Problem Corrective Action Poor image quality in TV mode (cutoff picture, snowy images). • Reduce signal splitters and excessively long cables. • Replace poor antenna cables and/or connectors to improve signal quality. • Press • Adjust the Noise Reduction setting in Picture menu. • In HDMI mode, make sure the external device is compatible with the LED TV. If any colors (red, green or blue) are missing, check the video cable to make sure it is securely connected. Loose or broken pins in the cable connector could cause an improper connection. • Wrong, abnormal or • missing colors • English No picture or the No • Make sure the VGA cable is properly connected to the LED TV’s VGA port. Signal message • Decrease the video resolution setting on the appears when a computer and try again. VGA cable is connected. • Adjust the display settings. Picture is cut off or appear in a sidebar Press to adjust the Aspect ratio. screen. • Check your antenna connection. If necessary, rotate the antenna and wait up to ten seconds for a signal. to adjust the Aspect ratio. Adjust the Hue, Saturation and Color Temperature settings in Picture menu. Connect the TV to another computer and check if the problem is with the computer screen. 51 TROUBLESHOOTING Problem Corrective Action English • Make sure the audio input cable is properly connected to the correct terminal, and that the correct input mode is enabled. • The volume may be muted, press or Vol+ key to turn on the volume. • Adjust the Bass, Treble, and Balance settings in Audio menu. • If you are using the TV speakers, make sure the TV Speakers option is set to On in Audio menu. • If you are using an external audio device, press and select Audio to make sure the TV Speakers option is set to Off in Audio menu. No sound NOTES: If the problem condition persists even after performing the recommended corrective actions, contact us by: 52 • Logging on to www.wde.com • Contacting the Westinghouse Customer Service at (800) 701-0680 or e-mail us at [email protected] SPECIFICATIONS SPECIFICATIONS Specification LD-3255VX Active Area 697.685 (H) x 392.256 (V) (Diagonal, mm) Resolution 1366 (H) x 768 (V) Brightness 250 (Nits, typ) Contrast Ratio 3000:1 (min) Response Time 6.5ms(g-g) (min) Aspect Ratio 1.77 (16:9) Display color 16.7M • HDMI x2 • AV with R/L Audio x1 • VGA with 3.5 mm mini jack x1 • SPDIF Out x1 • USB for service x1 • Tuner x1 • R/L Audio Line Out X1 10W (2 channels) 480i/p, 720p, 1080i/p 640 x 400 @ 85Hz, 640 x 480 @ 60Hz/75Hz, 800 x 600 @ 56Hz/60Hz/75Hz, 1024 x 768 @ 60Hz/70Hz/75Hz/85Hz, 1280 x 768 @ 60Hz, 1360 x 768 @ 60Hz, 1440 x 900 @ 60Hz, 1366 x 768 @ 60Hz Panel Audio/Video Input/Output Terminals Speaker Out AV Timing PC Timing Power Consumption (Watts) English Item Model Name ≤ 90W 53 SPECIFICATIONS Item Specification Power Consumption (Standby, Watts) <1W With stand: 769 x 534 x 197 mm English Physical Specifications 30.3 x 21.0 x 7.8 inch Dimensions (WxHxD) Without stand: 769 x 500 x 39 mm Weight (Net) Weight (Gross) 30.3 x 19.7 x 1.5 inch 6.6 kg (14.6 lb) 7.192 kg (15.9 lb) NOTES: • These product specifications are subject to change without user notification. • 54 Do not set your computer graphics card to exceed the unit’s refresh rates; doing so may cause damage to the LED TV.