Clarke SHHH 2 User manual

Clarke SHHH 2 User manual
COMPRESSORS
Big Pioneer 3hp motor
Compressors
The compressors that Flints stock are mainly used by scenic artists
to power their spray guns or by technicians requiring air for nailers
and staple guns. Most of the ones we list are easily portable so that
they can be lifted into the boot of a car for work in a variety of
locations. Consideration should be given to the air output from the
compressor. Almost any compressor will acheive the pressure
needed but it is the volume of air which is important. The popular
SATAJet 1000 B RP spray gun will use around 7.1cfm at full tilt
whereas the Minijet 3000 B HVLP uses around 4cfm. As scenic work
normally involves stop/start spraying they will operate satisfactorily from small portable compressors giving upwards of 7cfm. Be careful though, because some HVLP guns use large quantities of air [the
SATAjet 4000 HVLP uses 15.2cfm] and really require large fixed
installation compressors [please phone for details of larger units].
Flints have spent a lot time looking into the compressor market with
a view to finding a replacement to the old Clarkes Pioneer which is
now no longer made. Ironically this new range, that we believe to be
the most suitable, are also called Pioneer Compressors but these
come from Italy and are of good quality. We are even hopeful that the
wheels won’t fall off which was so common with the old Clarkes
Compressors that we included spare circlips for them!
delivering 10cfm [17m3/h]. 20L
tank. Weight 33.5kg.
The larger receiving tank is
more suited for workshop or
paint frame use, this version is
a little bit heavier to lift into a
car but still very compact and
portable.
A 9mm Sata type hose will
push fit direct to the compressors connector.
To use 8mm bore hoses see
the Pioneer converter listed
on page 2.
Pioneer Compressor 312M
9mm bore hose [10m]
Clarkes Raider A powerful
portable V twin compressor delivering
14cfm with a 50L tank. Ideal for
use with air tools and most spray
equipment. 230v single phase 3hp
motor. Maximum working pressure 8
bar. Wt 46kg. Fitted with regulator and
gauge. For oil see .
à
The New Pioneer Range These are the new Pioneer
Compressors from Italy. They are available in two sizes – The
Pioneer 265 and The Big Pioneer with a more powerful motor and
larger tank.
Both models have the following outstanding features:
Clarke Rebel
Raider
4 Shockproof ergonomic structure
4 Single unit distributor fitted with valves and gauges
4 Accessories protected by a metal panel
4 Sturdy wheels for use on rough terrain
4 New compact design
4 Two front feet for better stability
4 Two versions either 9.5L tank and 2hp motor or 20L tank with
3hp motor
Pioneer Compressor 265M
Clarke Shhh...Air 3/9
Shhh...Air 3/9
9mm bore hose (10m)
price
£269.00
£50.00
See à for compressor oil.
Flint Hire & Supply Ltd., Queens Row, London SE17 2PX
code
TOL803
list
£529.40
price
£395.00
COMPRESSOR OIL
Compressor Oil Treat them to
some TLC. They do need oil! You’d be
surprised how many compressors we
find with empty sumps. The Shhhh
compressor uses synthetic oil. We
recommend the Fiac oil for the Fini
Pioneer compressors and the Clarkes
oil for the Rebel compressor.
To use 8mm bore hoses see the
Pioneer convertor à
code
FIN265M
SATAMIM1030
price
£225.00
Clarkes Shhh...Air A virtually
silent compressor [40db at 1m] suitable for
powering the SATAjet 20 B and
SATAgraph airbrushes.
Output 2.15cfm with a 9 litre receiver.
8 bar [115psi] maximum working
pressure. These compressors have a
50% duty cycle and are suited to the
studio or model shop but not heavy duty
use. For oil see .
Uses a 9mm Sata type hose
which will push fit direct to the
compressors connector.
Best
Seller
code
list
TOLPED14A50 £349.00
à
Pioneer 265 2hp motor
delivering 8.8cfm (15m3/h). 9.5L
tank. Weight just 22kg. The ideal
freelance scenic artist compressor which is easy to transport in
the boot of your car.
price
£390.00
£46.50
CLARKES COMPRESSORS
PIONEER COMPRESSORS
1
code
FIN312M
SATAMIM1030
Fiac Oil
For Pioneer
For Rebel
For Shhh....Air
code
FIN6102250000
CLA3050810
CLA3050795
1L
code
£9.33
£4.80 CLA3050802
£12.95
tel 020 7703 9786 fax 020 7708 4189
5L
£12.95
flints.co.uk
AIR HOSES & FITTINGS
8mm BORE HOSES 1/4” BSP THREADS
The wide bore and special design of the quick release fittings will
allow a far greater air flow to the gun. In a simple experiment using
a conventional 8mm hose and one of these 9mm hoses connected
to a “Y” fitting it was found that the 9mm hose delivered almost
twice the volume of air. Using these lightweight and very flexible
hoses may help to solve the struggle to find a small portable compressor which delivers enough air volume to your spray gun. By the
way, if you are using 9mm bore hoses on Clarkes compressors,
don’t tighten them up too hard but use some PTFE tape to make the
threads seal. If you tighten them, the air will not flow!
9mm Bore Air Hose A good quality
8mm Bore Air Hoses High pressure
[300psi] round rubber hoses with 1/4” BSP
swivel nut fittings. If you are using HVLP spray
equipment you may consider upgrading to
9mm hoses which are listed on the previous column
Air Hoses
code
coil
each
10m
TOL822H
£11.45
15m
TOL823H
£17.20
30m
TOL820H
£29.90
Worm drive hose clips GEN051
[11-16mm]
£0.45
à
9mm BORE HOSE (FOR SATA) 1/4” BSP THREADS
8mm BORE HOSE FITTINGS 1/4” BSP THREADS
1/4” Hose Fittings for 8mm Hose Endless fun and
confusion! As a bit of a guide, this is what you would need if you
want to couple a compressor with 1/4” male thread to a spray gun
using quick release fittings. Mount a “snap female body” onto the
compressor, put a “snap male adapter” into one end of the hose.
The hose will now snap onto the compressor. Put a “snap male
body” onto the other end of the hose and a “snap female adapter”
onto the gun. The gun will now snap onto the hose. Easy peesy! To
simplify things just order the top four listed below.
very flexible and lightweight 10m hose with
quick release couplings on each end. plugs
straight into the New Fini Pioneer
Compressors.
9mm Bore Hose
code
price
SATAMIM1030
£71.60
Female quick release to suit most compressors.
[1/4”BSP]
Female Compressor End
code
price
SATA13599
£12.00
9mm Quick Fitting Male
Male quick release to suit most hoses. [1/4”BSP]
Male Compressor End
code
SATA13623
price
£12.50
Compressor to gun snap connectors
9mm Quick Fitting Female
à
Snap female body
TOL842
£4.20
à
Snap Male adapter
TOL831
£1.25
à
Snap male body
TOL841
£4.20
à
Snap female adapter
TOL832
£1.60
Snap hose adapter
TOL833
£1.25
Gun End Quick Fitting
Quick release to suit most guns. [1/4”BSP Thread]
1
/4” hose adapter
TOL824
£0.95
Gun End Fitting
Female
Male
Tail 1/4” nut
TOL844
£1.25
Hose joint
TOL843
£1.25
code
SATA13656
SATA53942
price
£5.36
£6.20
Swivel for Spray Guns A useful attach-
Y Connectors Available either complete with
ment for the SATA guns, the swivel allows the hose
to move freely without kinking.
snap fittings ready to take standard 8mm bore air
hoses [when fitted with snap adapters]. or as a plain
fitting with female 1/4” BSP threads on all outlets.
Swivel for Spray Guns
For all SATAjet guns (non digital top coat guns)
For all digital guns, minijet, 1000 & 100 series
code
SATA19745
SATA16162
price
£24.50
£24.10
Nipple Male BSP Useful to convert a female
fitting to a male one or to convert a 1/2” wall
outlet to 1/4” BSP thread. Tapered threads.
Nipple Male
code
price
1/4” to 1/4”
TOL103014
£1.00
1/4” to 1/2”
TOL103016
£2.00
Type
Y Connector with fittings
Y Connector plain
6mm BORE HOSES 1/4” BSP THREADS
Coiled Air Hoses Useful for running small
spray guns when the air outlets are ceiling mounted. 6mm bore with 1/4” BSP screw connectors on
each end. Max working pressure 150psi (10.5 bar)
PIONEER CONVERTORS
Coiled Air Hose
7.5m
Push-fit converter This adaptor will allow 8mm
hoses with standard push fittings to be fitted to the Big
Pioneer and Pioneer 265 compressors.
code
price
TOL8Y
£16.88
TOL103301 £2.50
code
TOL3110458
each
£3.95
P.T.F.E Tape
P.T.F.E. Tape Used to lubricate and seal air hose joints.
Push-Fit Converter
code
TOL845K
price
£9.30
P.T.F.E. Tape
code
TAP077
Flint Hire & Supply Ltd., Queens Row, London SE17 2PX
tel 020 7703 9786 fax 020 7708 4189
small roll
£0.80
flints.co.uk
2
SATA SPRAY EQUIPMENT
Flints stock SATA spray equipment with equipment specially selected to
suit the scenic artist. With more than 100 years dedicated to providing
high tech spray equipment to over 85 countries, SATA provides a uniform
standard of quality which is recognised in the industry as superior. By
purchasing SATA equipment you can expect the very best.
HVLP and RP?
The old style high pressure guns have been phased out for health and
environmental reasons. The old type of gun, such as the DeVilbiss GFG,
would often put as much as 65% of the paint material into the
atmosphere rather than onto your canvas. Not only is this a
considerable health risk but it is a waste of expensive scenic paint.
HVLP stands for High Volume Low Pressure. A spray gun with this
specification will place at least 65% of your paint where you want it,
on the canvas, and not in the air. These guns tend to have a slightly
different feel to high pressure guns and they generally require very
high volumes of air. Except for the small MiniJet 3000, HVLP guns are
more suited to paintshops which have large fixed compressors. SATA
HVLP guns have a green ring around their air cap.
RP stands for Reduced Pressure. Guns to this specification also
comply with the latest regulations but provide a more similar feel to
the old high pressure guns. They require less air volume and so are
more suitable for the freelance scenic artist using small portable
compressors. SATA RP guns have a blue ring around their air cap.
When using these high specification guns it is advised, although not
crucial, to use 9mm bore hoses. These hoses will deliver almost twice
the volume of air than the more common 8mm bore hoses.
3
SATAjet 4000 B & SATAjet 4000 B Digital
Choose
this for the
ultimate finish
SATAjet 4000 B RP The
new SATAjet 4000 B is setting the
standards. Featuring state-of-theart technology, the spray gun has
been optimised with the passion for
precision so typical of SATA as well
as undergoing intensive practical
tests. The result: a soft spray pattern which is second to none, pefect
ergonomics and outstanding atomisation for excellent finishes.
You should choose this gun if you
are seeking the ultimate fine finish
but for most scenic work you may
want to consider the SATAjet 100 or
the versitile SATAjet 1000 series.
Have
4 15% Lighter just 491g
you tried the
4 Improved handling
RPS system? See
4 Higher precision
page 1.56
4 50% noise level reduction
4 Allows uniform and perfectly shaped spray fan
4 Improved setup functions
4 Smoother spray action
Technical data: Inlet pressure 2-2.2 bar [29.00-31.9 psi], air
consumption 285NI/min [10.1cfm], spray distance 170-210mm [7-8
inches]. Supplied with 0.6L PVC cup.
Satajet 4000
1.3 Standard
1.3 Digital
Spare Cup
code
SATA166769
SATA166579
SATA27243
list price
£465.00
£499.00
each
£372.00
£399.20
£43.00
Flint Hire & Supply Ltd., Queens Row, London SE17 2PX
SATAjet 1000 B RP
SATAjet 1000 B RP This is
a universal gun with a wide range of
set-ups from 0.8mm right through to
a staggering 5mm! Flints stock the
1.6mm, a real all rounder, the 2.5mm
for coverage of larger areas with a
bit more texture and the massive
4mm set-up for large splatter and
heavy texture effects [especially
when pressurised!]. See page 6.
Chosen by the Royal Opera House,
National Theatre and leading scenic
A
artists as their preferred gun for
brilliant all
splattering large cloths. The SATAjet
rounder!
1000 range not only has a wide
variety of set ups but also has some
useful accessories such as nozzle extensions for spraying floor cloths.
See page 5.
4 Amazing splatter effects when used at low pressure
4 Fine atomisation when used at recommended pressure
4 Optimum finish results in all fields of application
4 Robust, long-lasting and easy to clean
4 Suitable for waterborne paints and corrosion resistant
4 Easy clean surface 4 Compact and lightweight
4 VOC-compliant 4 Wide range of nozzle sizes: 0.8 - 5.0mm!
4 Extensive range of accessories, such as extensions and
pressurised cups, etc
4 Great value for a gun of this quality
Technical data: Inlet pressure 1.5-2 bar [21.8-29.00 psi], air
consumption 275NI/min [7.1cfm], spray distance 180-230mm [7-9
inches]. Supplied with 0.6L PVC cup.
SATAjet 1000 B RP [normally held in stock]
Gun with 4.0mm set up
Gun with 2.5mm set-up
à Gun with 1.6mm set-up
code
SATA154161
SATA151209
SATA149310
list price
price
£305.00 £244.00
£285.00 £228.00
£285.00 £228.00
SATAjet 1000 B RP [available to order]
Gun with 0.8mm set-up
Gun with 1.0mm set-up
Gun with 1.3mm set-up
Gun with 1.8mm set-up
Gun with 2.0mm set-up
Gun with 3.0mm set-up
code
SATA151183
SATA151191
SATA149302
SATA150391
SATA149328
SATA151217
list price
£285.00
£285.00
£285.00
£285.00
£285.00
£285.00
price
£228.00
£228.00
£228.00
£228.00
£228.00
£228.00
SATAjet 1000 B RP Nozzle Sets
code
price
0.8mm set-up only
SATA151316
£98.30
1.0mm set-up only
SATA151324
£98.30
1.3mm set-up only
SATA149161
£98.30
1.6mm set-up only
SATA149179
£98.30
1.8mm set-up only
SATA150417
£98.30
2.0mm set-up only
SATA149187
£98.30
2.5mm set-up only
SATA151332
£98.30
3.0mm set-up only
SATA151340
£98.30
4.0mm set-up only
SATA154187
£124.20
5.0mm set-up only
SATA154195
£124.20
Please Note: SATAjet 1000 B RP set-ups and nozzle sets may need to
be ordered in from SATA therefore please allow 7 days for delivery.
tel 020 7703 9786 fax 020 7708 4189
flints.co.uk
SATAjet 100 BF RP
SATAminijet 3000 B HVLP SPRAY GUN
SATAjet 100 B F RP This is a
SATAminijet 3000 B HVLP
really excellent reduced pressure gun at a
fantastic price. When operated at around
0.5 bar with the material flow set to high it
produces an excellent large splatter effect.
These effects need lots of paint so please
ensure your paint is diluted enough to flow
really freely and make sure the breather in
the air cap is clear to avoid any suction.
Great
When operating at the recommended
price for a
pressure of 1.5-2 bar the gun provides a
superb gun!
controlled spray pattern and rapid even
coverage. The air consumption matches the small portable
compressors typically used by freelance scenic artists. For scenic
work this is an excellent choice of gun. Technical data: Inlet
pressure 1.5-2 bar [21.8-29.00 psi], air consumption 290 Nl/min 245Nl/min (P) [7.1cfm], spray distance 180-230mm [7-9 inches].
Nozzle size can be increased to 2.5mm see SATAjet 100 BP below.
A very popular and versatile miniature gun
for detailed scenic work. Full high volume
low pressure specification exceeding VOC
regulations but still only requiring the kind
of air volume put out by small portable
compressors. The gun and cup weighs just
300g which will reduce user fatigue. Most
spray guns are designed primarily for male
Can
users with big mitts but this Minijet 3000 is
now take pots
perfectly suited to scenic artists with
up to .9L!
smaller hands. This new version is fitted
with a fan control on both sides for right and left handed users and
also incorporates the quick change system for rapid pot removal.
You can now purchase an adapter to enable this gun to be used with
RPS [see page 5] allowing pots up to .9L to be used. Many of our
clients find this is the gun they use most frequently. Air consumption is just 4.1cfm. Standard cup size .125L. Air Pressure 2 bar
[29psi]. Spray distance 125-150mm [5-6 inches].
SATAjet 100 B F RP Standard Set Up
Choose this version for maximum versitality. Nozzle size 1.6mm.
SATAjet 100 B F RP Standard Set Up
code
list price
price
Gun 1.6mm nozzle and .6L cup
SATA145193 £232.00 £185.60
Gun 1.6mm nozzle and .75L ali cup SATA146134 £233.00 £186.40
Spare .6L cup
SATA27243
£42.40
SATAjet 100 B F RP Scenic Set Up
Extra large 2mm nozzle for very high material flow rates.
SATAjet 100 B F RP Scenic Set Up
code
list price
price
Gun 2mm nozzle and .6L cup
SATA145219 £232.00 £185.60
Gun 2mm nozzle and .75L ali cup SATA147421 £233.00 £186.40
Spare .6L cup
SATA27243
£42.40
SATAjet 100 BP - FILLERS and GESSO
For
fillers and
splatters
SATAjet 100 B P Any waterborne
and solvent-based material available on the
market can be sprayed without restrictions
with this new spray gun which was designed
for spraying polyester fillers. The huge
2.5mm nozzle enables fantastic splattering
effects to be performed at speed but the
gun will also cope with applying layers of
Idenden Spraycote and, of course spray
fillers. This gun is not fitted with an air
micrometer, flow should be regulated at the
compressor.
4 A specialist gun for spraying fillers and gesso.
4 Correct atomisation for fillers etc. Very controlled application.
4 Capable of large splatter effects when used at low pressure.
Technical data: Inlet pressure 2 bar [29psi], air consumption 245
Nl/min [8.7cfm], spray distance 180-230mm [7-9 inches].
SATAjet 100 B P
code
list price price
Gun 2.5mm nozzle and .6L cup
SATA145185 £223.00 £180.60
Gun 2.5mm nozzle and .75L ali cup SATA146217 £233.00 £186.40
Spare set up [also fits 100 B F RP] SATA145284P
£87.30
SATAminijet 3000 B HVLP
Choose the 1mm version if you are using the gun primarily for detail
work and the 1.2mm for detail and general work.
SATAminijet 3000 B HVLP Standard Set Up code
list price price
Gun 1mm SR nozzle and .125L cup
SATA125732 £241.00 £192.80
Gun 1.2mmSR nozzle and .125L cup SATA125740 £241.00 £193.80
Spare QC cup .125L
SATA125443
£41.70
Larger .3L cup
SATA128470
£41.00
RPS adapter for cups to .9L
SATA135798
£33.60
SATAjet 20 B AIRBRUSH
SATAjet 20 B Airbrush
This air brush is designed for fine detail and
artwork. Ideally suited to modelmaking and
stencilling. Most airbrushes are held like
pens and can be awkward to handle but this
SATA airbrush has the conventional grip that
most scenic artists are familiar with. It will
also cope with paints that small airbrushes
can not handle. Air consumption 1.4cfm. This
gun will operate using the very quiet
Shhhh..Air compressor listed on page 1. Supplied with 65cc
gravity cup plus 25cc plug-in glass cup and 3 spare glass cups.
Air Pressure 1 bar [14.5psi]. Tip: Please pull in the trigger prior to
screwing on the air cap or the hard needle will
Take
wear away the softer air cap.
a look at Ben Johnson’s
SATAjet 20 B
amazing paintings at
www.benjohnsonartist.com
Choose the 0.5mm version for the finest model
work or the 1mm version for modelmaking and stencilling.
SATAjet 20 B Standard Set Up
code
list price price
Gun with .5mm nozzle and .06L cup SATA86207 £280.00 £224.00
Gun with 1mm nozzle and .06L cup SATA86223 £280.00 £224.00
Spare 1mm set up
SATA61523
£63.10
Problems Splattering?
Spray gun designers go to huge lengths to provide perfect paint atomisation, so to get a splatter effect we need to break all the rules! Set the
air pressure very low, say 0.5bar and set the material flow very high. The gun should splatter merrilly away. However it will need to use a large
quantity of paint so it is crucial that:
a) The breather hole on the air cap is not blocked or partially blocked to create suction. If in doubt take the cap off the lid.
b) The paint is sufficiently diluted to flow easily through the gun. It should be really sloppy.
c) If you want to splatter thick textured materials such as Crystalgel or Gesso then it is best to pressurise the pot (see page 6).
Happy splattering.
Flint Hire & Supply Ltd., Queens Row, London SE17 2PX
tel 020 7703 9786 fax 020 7708 4189
flints.co.uk
4
SATAgraph 3
SATAgraph 3 An airbrush suited for
the finest graphic work. Nozzle size 0.25,
gravity flow cup 2.5ml. Inlet pressure
variable. Air consumption just 0.4cfm
[approx 10 Nl/min] allowing the use of
small Shhh... compressors. In order to
couple up to a compressor you will need
to purchase the 3m long PVC hose which
is complete with all the fittings.
SATA Silicone Free Grease High performance grease
for spray guns. Acid free. 100g tube. An essential accessory.
Silicone free grease
code
per tube
SATA48173
£8.60
SATA 1L Alloy Cup Quick change cup for any SATA gun with
or without QCC.
1L Alloy Cup
code
SATA96685
each
£39.60
SATA Cleaning Set complete with 2 cleaning brushes and
SATAgraph 3
SATAgraph 3 without hose
3m PVC hose and fittings
code
SATA134569
SATA32987
list price price
£240.00 £192.00
£36.50
SATA AIR GAUGES
12 cleaning needles.
Cleaning Set
each
£26.90
SATA RPS RAPID PREPARATION SYSTEM
Air Micrometer with Gauge
This useful compact micrometer and gauge
can be attached directly to the gun. Air
pressure may drop over the length of the
hose so readings taken from the
compressor can be inaccurate. This gauge
allows the painter to make fine pressure adjustments without
having to go to the compressor. Ideal for setting up scenic effects.
Can also be used on other makes of guns.
SATA Air Micrometer with Gauge
When purchased alone
When purchased with a gun
5
code
SATA64030
code
SATA27771
SATA27771+Gun
price
£63.30
£49.98
ADAM 2 Digital Micrometer This
is an upgrade of the ADAM Digital Micrometer.
4 Weighs just 49g - lighter than ADAM model.
4 User can replace battery easily and quickly.
4 Imminent battery exchange indicated on the
display.
4 Lifetime of battery is now upto 30% higher.
4 EX-proof and ATEX approved.
4 With extra docking stations the display can be
quickly moved from gun to gun.
SATA ADAM 2 Digital Micrometer
code
price
ADAM 2 display only [needs docking station] SATA160689
£134.70
ADAM 2 including docking station
SATA160846
£165.00
ADAM 2 inc. docking station for minijet SATA160879
£165.00
ADAM 2 docking station only
SATA160788
£55.00
ADAM 2 docking station only for minijet SATA160861
£55.00
ADAM 2 battery kit
SATA160739
£21.70
SATA ACCESSORIES
Bench Stand A very handy free-standing stand designed to take all SATA guns.
Bench Stand
code
SATA40188
price
£27.70
SATA Gravity Cup Filters Gravity
cup filters to fit all the SATA guns except the
small MiniJet3000 B HVLP and SATAjet 20
which should have their paint filtered before
pouring into the cup. Packs of 10. For more
paint filters and strainers visit flints.co.uk
Gravity Cup Filters
SATA Gravity Cup Filters (pk 10)
code
SATA3988
price
£16.00
Flint Hire & Supply Ltd., Queens Row, London SE17 2PX
SATA
RPS
Preparation
Rapid
system
One cup with four functions
4Mixing. 4Painting
Ingenious
4Refilling 4Storing
time saving
A true all rounder. The cup stands on the bench and
device!
mixing takes place directly in the graduated cup. No
need to use an extra paint kettle. The RPS cup will then fit directly
to any SATA gun with the QCC connection or standard cup thread
(although the Minijet will require the listed adapter.) The very low
weight helps the ergonomics. When changing colour, simply remove
the cup and attach the air tight seal. The paint can be stored in the
clear pot ready for its next use. Attach a new RPS cup and carry on
spraying. Once the job is complete the cups can be stacked inside
each other and disposed of without having to waste time and solvents cleaning cups. The cups are also available in .9L size to dramatically increase the guns capacity. Other adapters are available
to use this system with other makes of gun - please phone for
details. Tip: If you are spraying a ceiling just bend the RPS cup forwards and it will enable you to spray upwards! You can even bend
them sidewards! Brilliant.
SATA RPS Rapid Preperation System
code
each
box
0.6L RPS with plug in sieve (57 pieces) SATA125070
£76.95
0.6L RPS with plug in sieve
SATA125070 £1.99
0.9L RPS with plug in sieve (40 pieces) SATA118489
£62.00
0.9L RPS with plug in sieve
SATA118489 £2.27
Adapter for Minijet 2, 3, 4 or 3000
SATA135798 £33.60
EXTENSIONS
Extensions A 200mm long extension. 1.6mm nozzle to fit SATA 1000 B
RP Guns. Ideal for spraying inside
boxes, lockers etc or to prevent backache when spraying floor cloths. Or a 200mm right angle extension
ideal for homesick submariners.
SATA Extension
code
price
Straight 200mm extension 1.6mm
SATA154211
£177.76
Right angle 200mm extension 1.6mm SATA154294
£273.92
HEAVY DUTY SPRING
Heavy Duty Spring If you are using your gun with
a BVD Pressurised Cup you may find that it dribbles a bit
even when the fluid control is off. This can be easily solved
by fitting a heavy duty spring. These springs are already
fitted to 4mm and 5mm set ups. Fits all guns except the
Minijet and B20
Heavy Duty Spring
code
price
SATA4648
£7.20
tel 020 7703 9786 fax 020 7708 4189
flints.co.uk
OTHER SPRAY EQUIPMENT
PRESSURE POTS & AGITATORS
SATA BVD Pressurised Cup Add
this cup to your SATA gun to enable it to
spray viscous materials. It easily copes with
Crystalgel and Weave Filler. It is ideal for
large splatter effects using viscous paints on
vertical surfaces when diluted paint would
tend to run. Use it to apply texture to built
pieces. For large jobs see the 24L pot below.
Use it with a SATA 4000, SATA 3000, SATA
1000 or SATA 100 guns.
4 Transforms your existing gun into a
My
completely new tool for amazing
favourite
textural effects
toy
4 Brilliant and reapeatable control
4 Watch our video on YouTube
Please refer to Heavy Duty Springs on previous page.
Pressurised Cup
code
SATA25775
Pro Guns An economical and serviceable gun
suited to those who can’t warrant the extra expenditure on the SATA guns. [1.4mm nozzle]
Pro Guns
PSC Spray Guns
price
£22.95
Graco
Air
Texture
Gun
Double-handle design provides maximum
support and control for ceiling, wall and
floor applications. Sprays textures such as
Foamcoat, Hardcoat and most gravity-fed
materials.
4 5.7L Hopper
4 Air Spray Trigger Gun
4 Four Nozzles (4, 6, 8 and 12mm)
Air Texture Guns
For frequent users
code
TOL245924
Clarkes
Air
price
£119.00
Texture
Gun
High capacity unit for textured finishes. 7.8L
tough plastic hopper. 4 nozzles and 5 spray
patterns give 20 combinations 450 offset
connector for spraying ceilings. Includes
instruction booklet with a truly alarming
picture of their hand model.
Air Texture Guns
For one off jobs
code
CLA5091120
price
£49.50
LONG NOZZLE BLOW GUNS
code
RRP
price
SATA31666
£1623.00
SATA14373
£114.35
SATA77834
£179.30
Long Nozzle Blow Gun A
valuable tool in any workshop for clearing
away dust prior to glueing or painting.
Unlike vacuum cleaners, blow guns can get
ingrained dust out of shakes and screwholes preventing paint
contamination. Useful for cleaning machines and motors. 1/4” BSP
male thread connection.
Long Nozzle Blow Gun
code
price
TOL825
£5.98
SATA153486 £343.00 £274.40
GRIT GUNS
SATA Grit Blasting Grit blasting
Agitators Should the material that you are spraying be prone
to settle during the job it is possible to agitate the material in the
pressure pot either automatically with the air supply or by hand.
Agitators
Compressed air agitator
Hand agitator for 24L pot
code
TOL810
AIR TEXTURE GUNS [HOPPER GUNS]
SATA 24 litre
Pressure Pot with
‘RILSAN’ coating
and stainless steel
material We have
Pressure Pot
24L Pressure pot (waterbased products)
Surcharge for allowing second painter
1x6m material & compressed air line supply sets
(Note: you will need 2 hose sets for twin gun set-up)
1x153486 SATAjet 1000K Spray gun (2.5mm nozzle set)
(Note: you will require 2 guns for twin gun set-up)
price
£31.95
PSC Spray Guns Suited for the smaller
compressors and cheaper than a week’s hire! Don’t
expect the quality of finish you would get with a
SATA gun.
price
£222.80
selected this pressure pot
for projects which require
large quantities of viscous
material to be sprayed. It
can be used to spray
A
materials such as Weave
real time
Filler and Crystalgel to add
saver
texture effects to cloths or scenery. It can also spray viscous
paints to obtain heavy splattering effects on vertical surfaces
without fear of the material running. This pot is suitable for
waterbased materials and can be fitted to allow two guns to be
operated at the same time. If you are spraying materials which
tend to settle, the pot can be fitted with an automatic agitator or
a manual one. These pots are fitted with dual regulators for fine
control of both air and material pressure
4 Dramatic time saving.
4 Super fast spraying at unbelievable speeds.
4 Ability to spray large quantities of many viscous materials
4 Two operators can work at the same time
4 Perfect control to obtain repeatable and even results
4 Ability to spray materials which would normally have to be hand
applied.
code
TOL811
code
SATA14456
SATA3525
price
£1176.00
£147.00
Flint Hire & Supply Ltd., Queens Row, London SE17 2PX
gun for small jobs complete with blasting
tube with 6mm carbide insert, material
cup to hold around 1L and male 1/4”
thread air connection. Life time approx
500 hours. Wt 0.8kg. Material grain size
from 0.1 to 0.6mm. Operating pressure 5-10 bar [73-150psi].
Grit Blasting Gun
code
price
SATA17335
£183.00
tel 020 7703 9786 fax 020 7708 4189
flints.co.uk
6
HAND MISTERS
AIRLESS SPRAY EQUIPMENT
Airless Spray Equipment For
HIRE
KillaSpray
extremely rapid spraying of large areas
nothing compares with airless equipment.
This M2300 240v [or 110v] unit delivers
3300psi with a max tip size of 0,023”. It
comes complete with 15m hose, gun RAC
and tip.
4 High quality finish.
4 Virtually no overspray.
4 Very quick and efficient.
4 Also for hire [see flints.co.uk/hire].
4 Other versions available.
Kingfisher
Hand Held Misters Strong hand sprayers with a wide range
of applications such as applying flameproofing. We stock the
popular and economical Kingfisher 2 pint version and the extra
robust Hozelock Killaspray.
Hand Held Misters
Kingfisher Economy (1.5L)
Hozelock Spraymist Sprayer (1.25L)
code
SAFS4000
SAFHOZ4122
price
£4.25
£18.90
Hudson 2 Gallon (8L) PumpLess
Sprayer Excellent value larger capacity
sprayer with a highly efficient pump which
pressurises with fewer strokes.
Hudson PumpLess Sprayer code
8L litre capacity
HUD27912
price
£35.00
Airless Spray Machine
M2300 (240v)
M2300 (110v)
code
PATM2300
PATM2300110V
price
£1,595.00
£1,595.00
DUSTING TOOLS
Dustin Mizer A hand
cranked dust blower ideal for
applying fullers earth or walnut
dust to set dressings. See www.flints.co.uk/hire for hire dusters.
Dusting Mizer
Mizer (excluding deflector)
Deflector (to direct upwards)
code
PATDM1085
PATDM1094
price
£47.60
£6.20
Hudson Dusting Tool For applying fullers earth or walnut
Hudson Suprema Bak Pak
Sprayer Ideal for fire proofing large
7
areas.
4 Tough one piece blow moulded tank
that is translucent for viewing the
liquid level.
4 Large easy-fill opening.
4 Corrosion resistant piston pump.
4 Roto-valve on/off control rotates
360° for up or down spraying with no
bending or wrist twisting.
Hudson Bak Pak Sprayer
15 litre capacity
code
HUD63184
price
£69.99
Professional X-Pert Sprayer Built
for the finest performance and ease of use; extra
rugged and dependable. Heavy gauge stainless
steel; 390mm brass pump with locking T handles;
built in pressure gauge and pressure relief valve;
in-line strainer; Kem Oil hose and more. Makes a
first class paint sprayer. Widely used in America
for painting large cloths. Can also be used to
power spray guns.
Professional X-Pert Sprayer
11.4 litre capacity (rec. refill 9.5 litres)
code
HUD93793
price
£207.00
dust to set dressings or for talcing the backs of cut cloths so
they don’t stick together when
flaked. See www.flints.co.uk/hire for details of hire dusters.
Dusting Tool 454g capacity
code
HUD96766
price
£18.33
STORAGE
Special Spray Gun Storage To
keep your spray equipment organised we
can make these foam inserts which will
neatly fit your SATA spray gun and can be
used with the Festool Systainer System.
The larger box is perfect for storing hoses,
spare fittings etc. These boxes simply clip
together and can be carried as one.
When ordering please specify the version
of spray gun to be stored in the box.
Storage Boxes and Foam Inserts
Spray Gun Box (SYS 2 TL) no insert
Foam insert for SYS 2 TL box cut to fit gun
Spray Equipment Box (SYS4)
code
FES497564
FHS400
FES497566
price
£39.40
£25.00
£45.90
For spray gun cleaner visit www.flints.co.uk
Visit flints.co.uk for all the latest products and special offers.
You can now see videos of the Spray Guns in use on our YouTube channel flintstheatre
Flint Hire & Supply Ltd., Queens Row, London SE17 2PX
tel 020 7703 9786 fax 020 7708 4189
flints.co.uk
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement