Samsung SDP-6500 Specifications
Add to my manuals47 Pages
Samsung SDP-6500 is a high-resolution video presenter that can project data from a PC, TV, or projector. It features a 12X zoom lens, 1,500,000-pixel CCD, and USB and RS-232 connectivity. It has various image control options, including negative/positive conversion, brightness and color control, image rotation, and image freeze. The device also supports GUI menu control and custom user settings. Additionally, it comes with a remote controller for convenient operation.
advertisement
Special features
Thank you for purchasing this product.
This product is a high resolution video presenter that can project all kinds of data on a PC monitor, a TV, or a projector with simple manipulations.
12X zoom lens
(can be used for the materials with sizes from near B4 to film)
By adopting 12X super optic angle zoom lens, it is possible to shoot all materials from the size of a film to near B4 size.
Adopted 1,500,000 pixel CCD
By adopting 1/2 inch PS type CCD, high resolution and excellent color reappearance are realized.
Can control USB and RS-232
By using USB, it is possible to view or store the image in a PC and control the functions of the set. Also it is possible to control the set by using RS-232C port.
Output modes from SVGA to SXGA
It supports various output modes from SVGA to SXGA that it can be connected to all kinds of projectors.
Remote controller is a standard feature
Remote controller is supplied as a standard feature for the product so that it can be manipulated from a distance. Thus it is very convenient during a conference.
TV output mode
By adopting TV output mode, monitoring and conference data can be recorded through VTR.
Features
Various image control
Digital features on your Digital Presenter provide useful and various image controls including:
- Negative/Positive image conversion
- Brightness and Red/Blue color control
- Image rotation
- Image save/recall
- Image freeze
- Image divide
Input source selection
You can quickly switch between your computer presentation and your document presentation with the INT/EXT button on the control panel or on the remote controller.
Custom user settings
To avoid any interruption of presentation to reset the digital presenter, you can preset up to 4 customized settings in the memory and simply recall it during the presentation.
Support to GUI menu system
SDP-6500 support to GUI menu system to control various function of digital presenter with mouse operation.
Contents
Product features and structure
Safety precautions ..................................................................5
Uses of digital presenter ........................................................6
Supplied accessories .............................................................7
Names and functions of each part ........................................8
Front side............................................................................8
Main control panel ............................................................10
Terminals at the back .......................................................11
On the remote controller ...................................................12
Operation methods
Set preparation......................................................................14
Connecting to output device ...............................................15
TV, PC Monitor or Projector..............................................15
Desktop computer.............................................................16
Computer ..........................................................................17
PS/2 Mouse ......................................................................17
Using the presenter ..............................................................18
To show the image received from external device ...........18
To project an object on the digital presenter.....................20
Adjusting your image ...........................................................23
Adjusting your image with GUI............................................28
Image section ..................................................................28
Digital section ...................................................................31
Miscellaneous section.......................................................35
Exit section .......................................................................37
Changing your image with Draw ........................................38
Before requesting service
Storage...................................................................................41
Trouble shooting...................................................................43
Fuse and battery replacement .............................................44
Specifications........................................................................45
Safety precautions
Follow these safety instructions when setting up and using your Digital Presenter:
1. Do not place the presenter on an unstable cart, stand, or table
2. Do not use the presenter near water or sources of heat.
3. Use the type of power source indicated on the presenter. If you are not sure of the power available, consult your dealer or power company.
4. Place the presenter near a wall outlet where the plug can be easily unplugged.
5. Take the following precautions for the plug.
Failure to comply with these precautions could result in sparks or fire:
Do not insert the plug into an outlet with dust present. Insert the plug firmly into the outlet.
6. Do not overload wall outlets, extension cords, or integral convenience receptacles. This can cause fire or electric shock.
7. Do not place the presenter where the cord can be walked on. It may result in fraying or damage to the plug.
8. Unplug the presenter from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners.
9. Do not block the slots and openings in the presenter case. They provide ventilation and prevent the presenter from overheating. Do not put the presenter on a sofa, rug, or other soft surface or in a built-in installation, unless proper ventilation is provided.
10. Never push objects of any kind through cabinet slots. Never spill liquid of any kind into the presenter.
11. Except as specifically explained in this User's
Manual, do not attempt to service this product yourself. Refer all servicing to qualified service personnel. Opening or removing covers may expose you to dangerous voltages and other hazards.
12. Unplug the presenter during lightning storms or when it will not be used for extended periods.
13. Do not place the presenter and remote controller on top of heat-producing equipment or in a heated place, such as a car.
14. Unplug the presenter from the wall outlet and refer servicing to qualified service personnel under the following conditions:
• When the power cord or plug is damaged or frayed.
• If liquid has been spilled into the presenter, or it has been exposed to rain or water.
• If it does not operate normally when you follow the operating instructions, or if it exhibits a distinct change in performance, indicating a need for service.
• If it has been dropped or the cabinet has been damaged.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Uses of digital presenter
Conference Education
Detailed information in a report, form, table, etc. as well as a three dimensional object, such as a model, can be projected on a screen clearly that all the participants can focus on the same topic during a conference. Thus it is very helpful for an effective progress of a conference.
Medicine and science areas
It can be used as an audiovisual tool for printed materials, such as text books, as well as audiovisual materials, educational materials, and especially for students' art works.
Advertisement and design areas
It is possible to present various visual data including slides and X-ray film etc. at a medical conference or a doctors' association in the order of file.
Demonstration or exhibition
It is useful in design area where visualization is necessary. It is possible to project catalogs and slides, thus the effect of a job can be checked easily.
By connecting to a large projector, it can produce dynamic images at a new product demonstration, an exhibition, or an event.
Supplied accessories
When you unpack your Digital Presenter, make sure that you have all these components.
User's Manual C-Composite cable S-video cable
Remote controller Power cable PS/2 Mouse
Lens cap PC Monitor cable USB Cable
SDP-6500 program etc.
Dust cover
Option
Name and function of each part
Front side
Digital Presenter SDP-6500
RO
TATE
APE
RTU
RE
ZOO
M
AF
INT
/EX
T
LAM
P
AW
C
MO
DE
SXG
XGA
A
Digital Presenter SDP-6500
Digital Presenter SDP-6500
Lens
Can rotate to the front and back.
Main support
RO
TAT
E
RTU
RE
ZO
OM
FRE
EZE
AF
AW
C
MO
DE
INT
/EX
T
SXG
XGA
SVG
A
EXT
1
EXT
2
Digital Presenter SDP-
650
APE
RTU
RE
ZOO
M
E
AF
FRE
EZE
LAM
P
AW
C
MO
DE
INT
/EX
T
EXT
1
EXT
2
XGA
A
SVG
A
Digital Presenter SDP-6500
LA
MP
AW
C
MODE
SXGA
XGA
SV
GA
EXT1
EXT2
Digital Presenter SDP-6500
Main lock button
Press to move the main support.
Lamp unit
(Upper lamp)
Document plate
(built-in light box)
Main control panel
(see next page)
IR Sensor
Name and function of each part
Main control panel
The buttons on the main control panel can be found in the remote controller. These buttons perform the same functions.
ROTATE AF
APERTURE ZOOM FREEZE
LAMP
IRIS
AWC
INT/EXT
EXT1
EXT2
MODE
SXGA
XGA
SVGA
POWER
Use this to turn the power on or off.
ROTATE
Use this to rotate the image by 90˚, 180˚, 270˚,
0˚.
ZOOM
Use this to control the size of an object projected on the screen.
AF
Use this adjust the focus automatically.
IRIS
Use this to control the brightness of the image by using the iris.
INT / EXT
Use this to select internal or external image
INT: to view the image on this product.
EXT: to view the VGA output from another device such as a PC monitor or a projector by connecting it to this product.
APERTURE
Use this to control the sharpness of the output image.
FREEZE
Use this to freeze the image.
LAMP
Use this to turn the upper lamp or light box on or off.
AWC
Use this to control the color automatically.
MODE
Use this to select the desired resolution for the video output device(PC monitor, projector) connected to this product.
Name and function of each part
Terminals at the back
POWER INPUT TERMINAL
Use this to connect the power cable. (100 - 240V, free voltage)
VGA VIDEO INPUT 1,2
Connect this to the VGA output terminal of another device by supplied PC cable.
When external input menu is selected, the image is shown through the VGA out terminal.
VGA VIDEO OUTPUT 1,2
Connect this to the RGB input terminal of a PC monitor or a projector by supplied PC cable.
RS-232C: COMPUTER CONNECTION
TERMINAL
Use this to connect RS-232C cable.
USB: COMPUTER CONNECTION
TERMINAL
Use this to connect USB cable when transmitting image by USB port.
MOUSE
Use this to connect PS/2 Mouse. (See page 17.)
S-VIDEO OUTPUT
This is the video output terminal connecting to a
TV that has S-video input terminal.
LCD OUTPUT
This is the video output terminal connecting to a
LCD monitor.
TV OUTPUT
Connect this to the TV input terminal.
Connect this to view the image projected on the
TV screen.
Even when the external input menu is selected, only the image on the main unit is displayed on
TV output terminal.
IR SENSOR
The remote control signal reception.
Name and function of each part
On the remote controller
POWER
Turns power on or off.
INT/EXT
Allows to choose the signal input to be displayed.
NEGA/POSI
Switches for negative or positive film.
LAMP
Turns the upper lamps and/or lightbox on or off.
FOCUS
Allows to focus an object.
F: Used to focus an object which is in the far distance.
N: Used to focus an object being close.
RED/BLUE/AWC
Adjusts the image color.
R +/-: Adjusts the red color.
B +/-: Adjusts the blue color.
AWC: Adjusts color automatically.
AF
Use this to adjust the focus automatically.
APERTURE
Controls the sharpness of the output image.
FREEZE
Keeps the current image on the screen.
MODE
Allows to choose the resolution of the VGA output device connected to the Digital Presenter.
SXGA(1280x1024)
XGA(1024x768)
SVGA(800x600)
ROTATE
Use this to rotate the image by 90˚, 180˚, 270˚,
0˚.
WIDE/TELE
• Enlarges the image size.
• Reduces the image size.
IRIS+ / IRIS-
• Opens iris to increase the brightness.
• Closes iris to decrease the brightness.
EXIT
Stops current function and return to the normal mode.
NTSC/PAL
Switches Video output mode to NTSC or PAL.
PRESET
• Saves the customized user setting values.
• Activates the preset user settings.
SAVE/RECALL
• Saves the projected image into the memory of this unit.
• Recalls the image from the memory.
DIVIDE
Divides the screen to show both of the current image and the image recalled from the memory simultaneously on one screen or to see all the images in the memory(Up to 8 frames) on one screen.
SHIFT
Shifts the recalled image shown in the divided screen from the left to right to show the hidden portion of the image.
Set preparation
Press the main lock button and raise the main support
Raise the lamp unit until it is convenient for use, and set it to the center of the document plate.
Digital Presenter SDP-6500
APER
TUR
E
E
AF
FRE
EZE
LA
MP
AW
C
MO
DE
INT
/EXT
EXT
1
EXT2
SXG
XGA A
SVG
A
Digita l Pre
Adjust the angle of the lamps properly.
Digital Presenter SDP-6500
RO TAT
E
APE
RTU
RE
ZOO
M
AF
FR
EEZ
E
LAM
P
AW
C
MO
DE
INT
/EXT
SXG
XGA A
EXT1
EXT2
Digita l Pre
Turn the lens area to face downward.
Digital Presenter SDP-6500
Remove the lens cap.
Digital P resenter S
DP-6500
Plug the power cord in.
Connecting to output device
TV, PC Monitor or Projector
Digital Pres enter S
DP-650
Connect a TV, PC monitor or Projector to this presenter to display the projected image using the AV cables, S-video cable or PC monitor cable.
RO TAT
APER
TURE
ZOO
AF
FREEZE
LAMP
AW
MO DE
INT
/EXT
EXT
EXT
SVG
XGA SXG
Digita l Pr esen ter SDP
-65
00
Connection
Connecting to output device
Desktop computer
Digital Pres enter SDP-
6500
RO
TA TE
ZOOM
AF
FREEZ
LAMP
AW
MO DE
INT/
EXT
EXT
EXT
SVG
XGA
SXG
Digit al P rese nte r SD
P-65
00
For SDP-6500, connect a desktop PC using USB cable and install the supplied SDP-6500 program. You can see the projected image on the PC monitor and control the image as a graphic file using the program.
RS-232C connection is available for advanced user. If you connect a PC with RS-232C cable, you should set up your PC and make your own program to control the projected image on PC. Ask your dealer for further details.
USB connection
RS-232C connection
Connecting to output device
Computer
Digital
Presen ter SDP -6500
If you connect computer through VGA IN port, you can receive video signal from the computer.
RO
TAT
APER
TUR
ZOOM
AF
FREEZE
LAMP
AW
MO
DE
INT/EXT
EXT
EXT
SVG
XGA
SXG
Dig ital P res ente r SD P-6
500
Connection
PS/2 Mouse
If you connect PS/2 mouse through MOUSE port, you can control various function of digital presenter.
(See page 28.)
Using the presenter
To show the image received from external device
Set up your digital presenter properly.
(See page 14.)
DP-6500
RO
TAT
E
APE
RTU
RE
ZO
OM
AF
FRE
EZE
LAM
P
AW C
MO
DE
INT /EX
EXT
EXT
SXG
XGA A
SVG
A
Digit al P rese nter
SD
500
Connect the input device from which you want to receive the image and the output device in which you want to show the image.
(See pages 15 through 17.)
Turn the power of the input and output device, and the digital presenter on.
ROTATE
APERTURE Z
AF
M FREEZE
LAMP
IRIS
AWC
INT/EXT
MODE
S
X
S
E
E
Using the presenter
Choose the video source with the INT/EXT button of the presenter.
LAMP
IRIS
AWC
INT/EXT
EXT1
EXT2
MODE
SXGA
XGA
SVGA
• Each time you press the button, the display shows
EXT1 OUT, EXT2 OUT, INT OUT.
• EXT1 OUT, EXT2 OUT
View the image from an external VGA output device through a PC monitor or a projector connected to the digital presenter.
• INT OUT
Choose this mode to show the image through the lens of the digital presenter.
Open the image on the computer. Now you see the image through a PC monitor or a projector.
Digital Presenter SDP-6500
RO TAT
APE RTU
RE
ZO OM
AF
FRE
EZE
LAM
AW
MO
DE
INT /EX
XGA
SXGA
SV GA
EXT1
EXT2
Digita l Pre sente r S
DP-6
500
Using the presenter
To project an object on the digital presenter
Set up your digital presenter properly.
(See page 14.)
Digital Presen ter SDP
-6500
RO TAT
APE RTU
RE
ZOO
M
AF
FRE EZE
LAM
AW
C
MO
DE
INT
/EX
EXT
EXT
SVG
XGA
A
SXG
A
Digita l Pre sente r SD
P-65
00
Connect to a TV, a PC monitor, a projector to display the image.
(See page 15.)
Turn the power of the output device and the digital presenter on.
ROTATE
APERTURE Z
Place the object on the lightbox, and adjust the head to face the object.
Digital Presenter SDP-6500
RO TAT
APE RTU
RE
ZOO
M
AF
FRE EZE
LAM
AW
C
MO
DE
INT/
EXT
EXT
EXT
SVG
XGA
A
SXG
A
Digit al P rese nter S
DP-6
500
Using the presenter
Select a proper lighting source with the LAMP button of the presenter. Each time you press the button, upper lamps on, lightbox on, then all lighting off.
AF
IRIS INT/EXT
M FREEZE
LAMP AWC MODE
Digital Presenter SDP-6500
Upper lamp. Use the upper lamps to project paper document and other material, and use lightbox lamp to project transparencies.
RO
TAT
E
APE
RTU
RE
ZOO
M
AF
FRE
EZE
LAM
P
AW
C
MO
DE
INT
/EX
T
XGA
SXG
SVG
A
A
EXT
1
EXT
2
Digita l P rese nter S
DP-6
500
Lightbox
Remove or attach the adapter lens according to the objected.
Digital Presenter SDP-6500
Rotate the lens to remove or attach it.
Digital Presenter SDP-6500
RO
TAT
E
APE
RTU
RE
ZOO
M
AF
FRE
EZE
LAM
P
AW
C
MO
DE
INT
/EX
T
XGA
SXG
SVG
A
A
EXT
1
EXT
2
Digita l P rese nter S
DP-6
500
• Remove the adaptor lens in the camera mode.
(possible focal lenght: 1m ~
∞
)
• Attach the adaptor lens to view a material or a document or a film placed on the document plate.
(Possible focal length: 230mm ~ 360mm)
• Beyond the possible focal length mentioned above, it might be out of focus. So pay attention to the distance between the object to be viewed and the main unit and whether the adaptor lens is attached.
Using the presenter
Focus on the object.
• Auto focus control: Press AF
• Manual focus control: press [Focus F] or [Focus N] to adjust.
E AF
IRIS
URE ZOOM FREEZE
LAMP AWC
You see the image on the TV, the PC monitor or the projector.
• To use versatile image control features, see pages 23 through 27.
Digital P
DP-6500
RO TAT
APE
RTU RE
AF
ZO OM
FRE
EZE
LAM
AW
MO
DE
INT
/EX
EXT
EXT
XGA
SXG
SVG
Digita l P res ente r SD
P-65
00
E AF
IRIS
URE ZOOM FREEZE
LAMP AWC
Adjusting your image
Use the control buttons on the remote controller or on the control panel of the presenter to adjust the projected image. Some of the main features are described below:
Adjusting image size
Press WIDE or TELE button on the remote controller to reduce or enlarge the image size displayed on the screen.
You can also use ZOOM or ZOOM button of the presenter to achieve the same result.
ZOOM
ROTATE AF
APERTURE ZOOM FREEZE
L
Adjusting brightness
IRIS
Press IRIS image.
Press IRIS overall image.
IRIS button on the control panel or IRIS + button on the remote controller to lighten the overall button on the control panel or IRIS - button on the remote controller panel to darken the
AF
FREEZE
LAMP
IRIS
AWC
INT/EXT
MODE
EXT1
EXT2
SXGA
XGA
SVGA
Adjusting your image
Adjusting image color
For automatic color adjustment, press AWC button.
If you want fine level adjustment, press BLUE + / - or RED + / - button on the remote controller button to increase or decrease blue or red color factor manually.
AF
LAMP
IRIS
AWC
INT/EXT
MODE
EXT1
EXT2
SXGA
XGA
SVGA
REEZE
Positive and negative switching
Hint:
To obtain the best result, put the camera lens facing the white paper and press AWC button.
Press NEGA/POSI button.
Each time you press the button, POSI or
NEGA appears alternately on the screen.
Set to POSI to see normal object and set to NEGA to see negative film.
Image sharpness control
Press APERTURE button to control the sharpness of the output image of this product.
- APERTURE ON: For a material mostly with words.
- APERTURE OFF: For a material with many pictures or colors.
ROTATE
APERTURE ZOOM FR
Adjusting your image
Image rotate control
For image rotation, press ROTATE button.
To rotate the image by 90˚, 180˚, 270˚, 0˚, press ROTATE button
ROTATE
APERTURE ZOOM FR
Saving image in memory
You can save the image up to 8 frames into your digital presenter's memory. After saving, you will be able to recall it.
To save the image into the memory, press SAVE button and specify the memory location within 4 seconds using the number keys from 1 through 8.
If you want to recall the saved image from memory, press RECALL button and press the memory location number wihin 4 seconds. If you press and hold down RECALL button, all images saved in memory are displayed one by one.
If you want to exit from the recall mode, press
EXIT button.
The memory location numbers are printed on the right side of these buttons. For example, if you want to save the image into memory location 7, press SAVE then press AF button printed 7 at right side.
Adjusting your image
Screen 2 divide and image shift
You can see both the image of an object currently projected and the image saved in memory simultaneously on one screen.
Press DIVIDE button and press the memory location number within 4 seconds to recall the image you want to see.
To cancel this mode and return to normal mode, press EXIT button.
You can see the image of an object currently projected at right side.
The recalled image from memory appears at left side. Press SHIFT button to shift the image from right to left. Each time you press the button, a third of the image will be moved from right to left.
3x3 Multi-Screen
You can see all the images saved in memory simultaneously on one screen and choose one to display it.
Press DIVIDE button for 2 seconds or more, then all the images saved in memory are displayed on the screen.
To cancel this mode and return to normal mode, press EXIT button.
When you want to see one of them, press the number button to recall it.
For example, if you want to see the image in memory location 3, press BLUE + button and the image is displayed on the screen.
Adjusting your image
Saving custom user setting
After you adjust feature value, you can save the value for next time use. You can save up to 4 different custom user settings. (You can save the setting on the Zoom, Focus, Iris, Lamp state and Color level buttons.)
To save the current value, press SAVE button and specify the memory location within 4 seconds using the number keys from 1 through 4.
To recall your custom setting, press the ACTIVE button and press the memory location number within 4 seconds.
The memory location numbers are printed on the right side of these buttons, For example, if you want to save the feature into memory location 4, press
SAVE then press FOCUS N button printed 4 at right side.
Adjusting your image with GUI
SDP-6500 support to GUI menu system to control various function of digital presenter with mouse operation.
To use GUI menu system, first of all, mouse device (PS/2 type) must be connected to mouse control terminal, if it is connected with success, mouse pointer will be appeared on the screen.
And then, click the right mouse button, GUI main menu is appeared on the screen, and GUI menu system is activated.
When [Exit] menu is clicked, GUI main menu disappears and only the mouse pointer remains displayed.
Menu and Functions
Image section
Image menu deals with various adjustment function of on-screen image.
Adjusting your image with GUI
Focus
Allow to focus an object in the far / near distance, or automatically.
Holding down [Far]/[Near] menu with the left mouse button, focus is activated.
Click [Auto] menu to auto focus function.
Zoom
Allow to enlarge or reduce the image size.
Holding down [Tele]/[Wide] menu with the left mouse button, zoom is activated.
Bright
Allow to open IRIS to increase the brightness or close IRIS to decrease the brightness.
Holding down [Up]/[Down] menu with the left mouse button, lens iris is activated.
Adjusting your image with GUI
Red / Blue
Allow to adjust image color through the red/blue gain control
Holding down [Up]/[Down] menu with the left mouse button, red/blue gain control is activated.
AWC
Allow to adjust image color automatically through automatic white balance control
Click [AWC] menu with the left mouse button, AWC function is executed once.
Adjusting your image with GUI
Digital section
Digital menu deals with various digital image processing function.
Freeze
Allow to keep the current image on the screen. Click[Freeze] menu with the left mouse button, freeze mode is activated and [Freeze] menu turns checked state. To release freeze mode, click [freeze] menu again or click
[Cancel] menu with the left mouse button (and then [Freeze] menu turns unchecked state).
Rotate
Allow to rotate the image by 0˚(Off), 90°, 180°, 270°. Click [0°/90°/180°/270°] menu with the left mouse button, image is rotated by user’s request and menu turns checked state following current status of image.
Adjusting your image with GUI
Save / Recall
Allow to save the projected image into the memory of digital presenter or recall the image from the memory.
To save / recall the image with the proper save number, Click [numbers] menu with the left mouse button, current image is saved into or recalled from memory.
Adjusting your image with GUI
Divide
Allow to divide the screen to show both of the current image and the image recalled from the memory simultaneously on one screen.
Click [numbers] menu with the left mouse button, screen is divided and selected number of image is recalled from memory and activated in menu.
Shift
Allow to shift the recalled image shown in the divided screen from the left to right to show the hidden portion of the image. Click[Shift] menu with the left mouse button, image is shift from left to right step by step each request in the divide mode.
Adjusting your image with GUI
3x3 Multi
Allow to see all the images in the memory (up to 8 frames) on one screen.
Click [3x3 Multi] menu with the left mouse button, 9 divide mode is activated and
GUI menu disappeared. If you click the image number on screen, select image will be expanded to full screen and GUI menu is appeared on the screen.
To Release 3x3 Multi mode, click the center image (samsung logo image).
Cancel
Allow to stop current image processing function and return to normal mode.
Click [Cancel] menu with the left mouse button, all digital function is released.
Adjusting your image with GUI
Miscellaneous section
Misc menu deals with miscellaneous function of digital presenter.
Preset Save / Exe
Allow to save the customized user setting values or to activate the preset user setting.
Click [numbers] menu with the left mouse button, current setting value is saved to flash ROM or load setting value from flash ROM.
Adjusting your image with GUI
NEGA Effect
Allow to switch for negative / positive image (default : positive). Click [NEGA Effect] menu with the left mouse button, current image turns negative image and menu turns checked state. To return positive image, click
[NEGA Effect] menu again (and then menu turns unchecked state).
Aperture
Allow to control the sharpness of the output image (default : On) Click [Aperture] menu with the left mouse button to turn on/off aperture mode. (Image mode / Text mode)
Video Out
Allow to switches video output mode to NTSC or PAL.
Click [NTSC/PAL] menu with the left mouse button, video mode is switched to current value.
Adjusting your image with GUI
Lamp
Allow to turn the upper lamps or lightbox on or off.
Click [All off/Upper/Lower] menu with the left mouse button, lamp mode is switched to current value.
Exit section
GUI main menu disappears and only the mouse pointer remains displayed.
Tips : Drag and Drop Function
GDI main menu can take any position of screen using Drag and Drop.
First of all, click the moving point of main menu, and then drag and drop to any position of screen what you want.
1. Click the moving point image
2. Drag the GUI main menu
3. Drop the GDI menu
Changing your image with Draw
SDP-6500 support to GUI Drawing system to draw straight lines, freehand lines, rectangular on the screen with mouse operation.
To use GUI Drawing system, first of all, GUI menu system and [Freeze] or [Recall] function must be activated.
Then Draw menu is now being activated. (See page 28)
When [Draw] menu is clicked, GUI Draw toolbar is appeared on the screen and GUI main menu disappeared.
[1] Exit Button
[5] Line Width Selection
[2] Tool Selection
[3] Foreground / Background Color Panel
[4] Foreground / Background Color Palette
Changing your image with Draw
Exit Button
Use the Exit button ( ) to exit GUI Drawing system to normal mode, or clear all the user’s images on the full screen.
Tool Selection
Use the Line Width Selection to set the line width to between 1 and 4 pixels.
Drawing the single line
To draw a Single line, Click the single line icon and then,
1) Position the cursor on the screen where you want the line to start.
2) Press and hold the left/right mouse button.
3) Drag the cursor.
4) To end the line, release the mouse button. SDP-6500 creates the line.
Drawing the rectangular
To create a rectangular, Click the rectangular icon and then,
1) Place the cursor at a corner of the area you want to select.
2) Click and drag the mouse until the selection is the size you want.
3) Release the mouse button.
Drawing the freehand line
To create a freehand line, Click the freehand line icon and then,
1) Position the cursor on the image where you want the line to begin.
2) Press and hold the left/right mouse button.
3) Drag the cursor on the path you want the line to take.
4) Release the mouse button.
Eraser Tool
1) Click the Eraser tool icon and then the cursor changes to the erasing rectangular.
2) Move the cursor over the line and click to delete the line.
Changing your image with Draw
Foreground / Background Color Panel
There are two active colors in GUI Drawing System, the foreground (left mouse click) and background(right mouse click) colors.
You can change the brush colors by selecting new foreground and background solid colors using the Color
Palette.
Foreground / Background Color Palette
Use the Color Palette to select the colors that you want to draw the line.
Move the cursor over the available colors panel. Left-click to select a foreground color, Right-click to select a background color. The two boxes above the Color Panel display the respective colors.
There are six colors to be selected, red, yellow, green, cyan, blue and magenta.
Line Width Selection
Use the Line Width Selection to set the line width to between 1 and 4 pixels.
Storage
Turn the power off and unplug the power cord.
Attach the lens cap.
Digital P resenter
SDP-65
00
E
APER
TU
RE
ZOO
M
AF
FRE
EZE
LAM
P
AW
C
MO
DE
INT
/EX
T
SXG
XGA
A
SVG
A
EXT
1
EXT
2
Digital Presenter SDP-6500
Turn the head upside down.
Digital P resenter S
DP-6500
While you pull the main lock button toward the front of the presenter, fold the head completely.
Digital Presenter SDP-6500
RO
TAT
E
RTU
RE
ZOO
M
AF
LA
MP
AW
C
MO
DE
INT/E
XT
X
SXG
A
EXT1
EXT
2
Fold the lamps on both sides completely.
Digital Presenter SDP-6500
RO
TATE
RTU
RE
ZOO
M
AF
FREE
ZE
LAM
P
AW
C
MO
DE
INT
/EX
T
EXT
1
EXT2
SXG
XGA
SVGA Digital P resen ter S
DP-6
500
Digital Presenter SDP-6500
RO
TA
TE
APE
RE
ZOO
M
AF
LAM
P
AW
C
MO
DE
INT
/EX
T
EX
T1
EXT
2
XGA
SVG
A
SXG
A
Digita l P rese nter S
DP-6
500
Digital Presenter SDP-6500
RO
TA
TE
RTU
RE
ZOO
M
FRE
EZE
AF
AW
C
MO
DE
INT
/EX
T
SV
XGA
GA
SXG
A
EX
T1
EXT
2
Digita l P rese nter S
DP-6
500
Trouble shooting
No image appears
- Check if the resolution of the output device corresponds to that of the digital presenter.
(For example, when the maximum resolution of a projector is SVGA and if the digital presenter is set to XGA or SXGA, then no image appears.)
- Check if the input selection of the output device is appropriate.
- Check if the iris control is adequate.
- Check if the VGA cable is connected to the VGA output terminal correctly.
- Check if there is any problem with the fuse.
- Check if the lens cap is removed.
No communication between the PC and USB.
- Make sure the operating system is Windows 98 or later. It doesn't work on Windows 95.
- For other detailed information, please refer to the program manual supplied with the product.
No image from a slide film or a negative film.
- Check if the light box is turned on.
- Adjust the lens to face the film directly.
- Check if the NEGA/POSI button is selected properly.
remote controller is not working.
- Check the battery of the remote controller.
Replace it with a new one.
The image is out of focus.
- Check if the adaptor lens is attached properly for the purpose. (See page 21.)
- Check if the distance from the object is too short.
When you use GUI, the mouse is not seen or does not work normally.
If there are problems, please contact the store
- Check the contact condition of mouse port and make sure it's mouse offered by you purchased the product or our distributor nearest you.
Samsung Techwin.
(It may not work if it's not mouse offered by Samsung Techwin.)
Fuse and battery replacement
Fuse replacement Battery replacement
Take out the fuse holder .
Open the battery compartment lid at the back of the remote controller.
Take out the fuse and replace it.
• Fuse type:2A, 250V
Insert the batteries so that their with a new one.
• Battery type:AAA type 1.5V
Put the fuse holder back.
Close the lid.
Specifications
Note: Spscifications are subject to change without notice.
Optical system
Illumination system
Specifications
Lens
Shooting Area
Zoom
Focus
Iris
Upper
Lower
Pick-up Device/
Effective pixel
Video
PC connection
General
Description
F=2.8~2.9 f=6.3~74.4, 12x power zoom
Max: 355 x 282mm, Min: 29 x 22mm
Powered (12X)
Powered (Auto Focus/Manual)
Auto (with fine level adjustment)
Attach to the side arm of the main unit
Light box (built-in main unit)
1/2" 1,500,000 pixels PS CCD / 1434(H) x 1050(V)
Frame rate
Sync system
VGA output
Video output
15 frame/sec
Internal sync.
1280 x 1024(SXGA), 1024 x 768(XGA), 800 x 600(SVGA) RGB Color.
C-Video VBS 1.0V
p-p
/ 75
Ω
(unbalance)
S-Video Y: 1.0V
p-p
/ 75
Ω
(unbalance)
C: 0.286V
p-p
/ 75
Ω
(unbalance)
Manual / Auto (one touch type) White Balance
Positive / Negative
Freeze
Input terminals
Output terminals
NTSC / PAL
Selectable built-in
VGA:2
VIDEO:1, VGA:2, USB:1, RS-232C:1, S-Video:1
Selectable
Remote controller Supplied
GUI(Graphic User Interface) Supplied
Input selection 3 channels (Internal: 1, External: 2)
On-screen display
Image freeze
Image save
Image recall
Image divide
Image rotation
Available
Available
Available (8 frames)
Available (8 frames)
Available (2divide of 9 divide)
Available
Image transfer to computer Available (USB: full, 1/4, 1/16 mode)
Preset function Up to 4 user settings
USB built-in
RS-232C
Application software
SET control
Windows application in Windows 98 or later & Macintosh OS 9.x.
Operating temperature/
Humidity
Power
+5˚C ~ +35˚C, 30% ~ 90%
Dimensions(mm)
Weight
Accessories
AC 100V ~ 240V Free Voltage, 50/60Hz, 60W
In-use: 665(W) x 562(H) x 510(D)
Storage: 496(W) x 145(H) x 570(D)
9kg
Remote controller, Cables, etc.
Memo
HEAD OFFICE : SAMSUNG TECHWIN CO., LTD
145-3 Sangdaewon 1-Dong, Jungwon-Gu, Sungnam, Kyungki-Do,Korea 462-121
TEL : 82-31-740-8137~8141
FAX : 82-31-740-8145
U.S.A OFFICE : SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
40 Seaview Drive, Secaucus N.J.07094, U.S.A
TEL : 201-902-0347
FAX : 201-902-9342 www.samsungpresenter.com
www.samsungtechwin.com
P/ No.: 6806-0411-01A
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project