Raymarine ST40 User manual

Raymarine ST40 User manual
INSTRUMENTS
www.raymarine.com
ST40 INSTRUMENTS
ST40 Instruments
Depth
Compass
Wind
Compact yet powerful, ST40 instruments feature extra large characters and razor
sharp displays for outstanding visibility in all light conditions. Fully compatible with
Raymarine SeaTalk® networking ST40 integrates seamlessly with Raymarine
autopilots and multifunction navigation displays.
ST40 Bidata
ST40 Bidata offers all the features of the ST40 speed
and ST40 depth units in a single display. Available
as a system with transducers or as a repeater display.
Display features: 200Khz frequency, digital depth
display of minimum depth, shallow and deep anchor
alarms. Current, max and average speed display.
Log, trip and sea water temperature indicator.
ST40 Wind
ST40 Wind instrument features wind speed
and direction in both apparent and true. Wind angle
can be locked manually or automatically. Display
features: Deviation and course-to-steer to achieve
locked wind angle. System supplied with rotavecta
type wind transducer.
ST40 Speed
The ST40 Speed instrument is available as a system
with a transducer or as a repeater display. Display
features: current, max and average speed in either
knots (kts), miles per hour, (mph) or kilometers per
hour (kph). Log and trip, and sea water temperature
indicator.
ST40 Depth
The ST40 Depth instrument is available as a system
with a transducer or as a repeater display. Display
features: 200Khz frequency, digital depth display of
minimum depth, shallow and deep anchor alarms.
Depth can be displayed in feet (ft), meters (m) or
fathoms (fa).
ST40 Compass
The ST40 compass instrument is available as a system
with a compass transducer or as a repeater display
for Raymarine autopilot systems. Display features:
Analog compass display with true or magnetic mode.
ST60 PLUS INSTRUMENTS
ST60 PLUS INSTRUMENTS
ST60 Plus instruments combine maximum performance and versatility with bold,
easy-to-read displays that set the standard for instrument systems. Based on the
award winning ST60 instruments, ST60 Plus feature a new bezel design that compliments
Raymarine’s multifunction navigation displays. SeaTalk networking enables each
instrument to receive 12 volt power and data from a single easy-to-install cable.
Plug and play compatibility with Raymarine Autopilots and Multifunction Displays.
SPEED
ST60 Plus with optional low
profile mounting bezel
The ST60 Plus speed provides accurate speed through
water. Calibration is easy using SOG data from SeaTalk
(GPS required). Available as a system with transducer or as
a repeater display. Display features: Speed (0 – 60 in kts,
mph or kph), max/average speed, cumulative log, trip log
with reset, 1/100 knot resolution, sea temp, stop watch/lap
time, 10 and 5 minute race start timer, and VMG (Velocity
Made Good).
DEPTH
The ST60 Plus delivers reliable depth performance and accuracy. Available as a system with 200 KHz transducer or as a
repeater display. Display features: Depth performance from
2.6’ to 600’ (0.8 – 180 m), maximum and minimum depth
display, depth trend indicator, adjustable display response,
transducer, keel or waterline offset.
WIND
The ST60 Plus wind display and systems offer reliable and
accurate performance. ST60 Plus Wind offers a choice of
vane or rotavecta wind transducers. Add the ST60 Plus
Close Hauled repeater for precise wind measurements
between 20° and 60°. Display features: Apparent wind
speed and direction, true wind speed and direction (relative), max wind speed, max wind speed alarm, beaufort
scale, adjustable display and pointer response, and heading
on opposite tack
GRAPHIC
*Visit www.raymarine.com for
a complete list of compatible
NMEA 0183 sentences
A versatile repeater of SeaTalk data from compatible
Raymarine instruments, autopilots, GPS, and multifunction
displays. The ST60 Graphic is also NMEA 0183 compatible*
for integration with other brands of marine electronics.
Display features: Easy-to-use chapter and page control,
depth, speed, SOG, sea temp, VMG, log and trip, true and
apparent wind speed & direction (relative), beaufort scale,
cardinal point, GPS Lat/Lon, COG, cross track error, bearing
to waypoint/ distance to waypoint, pilot rudder angle, heading,
autopilot status indicator, battery voltage/battery and voltage alarm.
TRIDATA
The versatile Tridata combines the functions of the ST60
Plus Speed and Depth instruments into a single display.
Choose a Tridata system with transducers or a Tridata
repeater display. Display features: Depth performance:
2.6’ – 600’ (0.8 – 180 m), max and min depth with trend
indicator, transducer keel or waterline offset, speed with
max/average display with 1/100 knot resolution, cumulative
log, trip log with reset, sea temperature, stopwatch/lap
timer, VMG (Velocity Made Good), SOG (requires data on
SeaTalk).
COMPASS AND RUDDER
Compass and rudder displays are available as systems with
transducers or as repeaters for Raymarine autopilot systems.
The Compass display can also repeat GPS course over
ground (COG) data from SeaTalk.
S T 7 0 C O L O R M U LT I F U N C T I O N I N S T R U M E N T S
st70 color multifunction instruments
ST70 multifunction instruments offer a brand new way of visualizing instrumentation.
Featuring a graphical user interface and high resolution color displays, ST70 provides
unmatched versatility and ease of use. Designed for simple setup and extensive
customization, ST70 delivers an array of intuitive digital, graphical and historical
display options.
ST70 Applications
The ideal companion instrument system for Raymarine MFDs, creating
a full color helm solution
• Choose multiple ST70 instruments and transducers for a full featured,
information rich instrument system
• Utilize ST70 as a navigation data repeater with a Raymarine multifunction display
TECH TIP: ST60 Plus Integration
• Add color to your ST60 instrument system with an ST70 multifunction instrument
• Each ST70 instrument is supplied with a first generation SeaTalk adapter cable for
plug and play connectivity with ST60/ST60 Plus instruments
• ST70 intelligently converts first generation SeaTalk data to SeaTalkng
ST70 Features Include:
• 3.5” Sunlight viewable display
• Eight user defined data pages with 16 screen layout options for each data page
• Easy-to-use menu and icon driven interface
• Fast SeaTalkng next generation data bus interface for creating an ST70
instrument network
• NMEA2000 compatible for engine instrument integration
• Simple start up wizard configures every ST70 display on the SeaTalkng data bus
• Combine with SeaTalkng transducers for depth, speed and wind data
• Compatible with Raymarine SeaTalk and SeaTalk2 instrument systems as well as
Raymarine autopilots and multifunction displays
Intuitive graphical
displays for
visualizing data
Customize the display
with analog, digital,
bar graphs and
historical data displays
GPS and Waypoint
Navigation display
Engine instrumentation
using NMEA2000
S T 7 0 P L U S I N S T R U M E N T & AU TO P I L OT S YS T E M
ST70 PLUS INSTRUMENT & AUTOPILOT SYSTEM
The ST70 Plus system is an innovative instrumentation and autopilot display
and control system engineered for premium power and sailing yachts. ST70 Plus
is the perfect partner for Raymarine E-Series and G-Series navigation systems. The
ultra bright 6.5” color display is ideal for installations where information is viewed
at a distance. An ergonomic remote instrument keypad provides complete control
of the intuitive menu and icon user interface, plus multiple ST70 Plus displays can
be controlled from a single instrument keypad. ST70 Plus is fully customizable with
high quality graphics, multiple color palettes and 17 unique screen layout options.
Combine an ST70 Plus display with either the Sail or Power pilot keypad and enjoy
full function autopilot control of any SmartPilot X-Series autopilot system.
Key Features
• 6.5” Ultra bright sunlight viewable display
• Superior visibility with high quality graphics and a wide viewing angle
• Night mode and inverse text mode enhance visibility at night or from a distance
• Create a system with SeaTalkng sensors for wind, speed, depth
and NMEA2000 compatible engine systems
• User defined instrument pages
• 17 screen layout options with analog, digital, and historical displays
• Configure as either an instrument or autopilot display
instrument keypad
The instrument keypad controls all the instrument functions via a
series of push buttons and a rotary ‘Unicontrol’ interface.
sail pilot keypad
Designed for sail boats, the sail pilot keypad consists of dedicated
buttons to engage and disengage the autopilot, perform a dodge
maneuver and track to a waypoint. Course adjustment and auto
tack functions are made using the port and starboard -1, +1, -10
and +10 keys.
power pilot keypad
The power pilot keypad is designed specifically for powerboats.
Dedicated buttons are used to engage and disengage the pilot
and the rotary control provides simple course changes.
WIRELESS
WIRELESS SMARTCONTROLLER
Take control of your Raymarine SeaTalk network with the powerful SmartController
wireless handheld remote. Access instrument data from ST40, and ST60 Plus in the
palm of your hand. Plus SmartController is a full function autopilot remote control.
The bright display and ergonomic keypad offer straightforward operation with access
to up to eight user defined SeaTalk instrument data pages.
SmartController Ordering Information
Part #
Description
E15023
SmartController with base station
ST40 NETWORK DIAGRAM
12 Volt
Power Supply
SeaTalk
3 Way SeaTalk
Junction Box
3 Way SeaTalk
Junction Box
SeaTalk
ST40 Depth Display
Depth Transducer
SeaTalk
SeaTalk
ST40 Speed Display
ST40 Wind Display
Speed Transducer
Wind Transducer
Typical ST40 Depth, Speed and Wind System
ST40 Ordering Information
Part #
Description
E22037
ST40 Speed Display
E22038
ST40 Depth Display
E22041
ST40 Wind Display
E22039
ST40 Bidata Display
E22042
ST40 Compass Display
ST40 Systems
E22047
ST40 Wind System
E22045
ST40 Bidata System (Thru Hull)
E22054
ST40 Bidata System (Transom Mount)
E22053
ST40 Depth System (Transom Mount)
E22044
ST40 Depth System (Thru Hull)
E22052
ST40 Speed System (Transom Mount)
E22043
ST40 Speed System (Thru Hull)
E22048
ST40 Compass System
ST60 PLUS NETWORK DIAGRAM
12 Volt
Power Supply
SeaTalk
SeaTalk
SeaTalk
ST60 Plus Depth
Display
ST60 Plus Speed
Display
ST60 Plus Wind
Display
Depth Transducer
Speed Transducer
Wind Transducer
Typical ST60 Plus Depth, Speed and Wind System
ST60 PLUS Ordering Information
Part #
Description
A22004-P
ST60 Plus Tridata Display
A22013-P
ST60 Plus Tridata System
A22002-P
ST60 Plus Depth Display
A22010-P
ST60 Plus Depth System
A22001-P
ST60 Plus Speed Display
A22009-P
ST60 Plus Speed System
A22005-P
ST60 Plus Wind Display (Analog)
A22011-P
ST60 Plus Wind System Analog Rotavecta
A22012-P
ST60 Plus Wind System Analog Vane
E22049-P
ST60 Plus Clubhouse Wind Display
A22016-P
ST60 Plus Clubhouse Wind Analog System
E22075-P
ST60 Plus Graphic Display
A22006-P
ST60 Plus CH/VMG Display
A22017-P
ST60 Plus Tridata Repeater
A22007-P
ST60 Plus Compass Display
A22014-P
ST60 Plus Compass System
A22008-P
ST60 Plus Rudder Angle Indicator Display
A22015-P
ST60 Plus Rudder Angle Indicator System
T22050-P
ST60 Plus Tridata w/Speed & Retractable Depth Transducer
T22052-P
ST60 Plus Wind System Analog Vane w/50M Cable
A25003-P
ST60 Plus Flush Mount Kit
E25009
ST60 Plus Bracket Mount Kit
ST70 NETWORK DIAGRAM
ST70 instruments
Transducer pod
Terminator
Wind
transducer
SeaTalk ng backbone
Power Supply
12V dc
Terminator
Transducer
pod
SeaTalk ng backbone
Transducer
pod
Depth
transducer
Speed
transducer
ST70 Ordering Information
PART #
DESCRIPTION
E22105
ST70 3.5” Color Instrument Display
E22106
ST70 Depth Transducer Pod
E22107
ST70 Speed Transducer Pod
E22108
ST70 Wind Transducer Pod
A22111
Smart Depth, Speed and Temperature transducer
A22112
Smart Depth and Temperature transducer with 12 degree tilted element depth sensor
ST70 PLUS NETWORK DIAGRAM
ST70+ Instrument displays
ST70+ Pilot Controller display
12V dc
12V dc
Wind
transducer
12V dc
Fuse
Fuse
Fuse
Terminator
Power Supply
for
ST70+ displays
Transducer
pod
ST70+ Pilot
Controller
keypad
SeaTalk
ng
ST70+
Instrument
keypad
backbone
ng
SeaTalk
Power Supply
5-Way Connector
12V dc
Terminator
DST800
Smart
transducer
SeaTalk
ng
backbone
X-10 Course
Computer
ST70 PLUS Ordering Information
PART #
DESCRIPTION
E22115
ST70 Plus Display
E22116
ST70 Plus Instrument Keypad
E22117
ST70 Plus Sail Key Pad
E22118
ST70 Plus Power Key Pad
E22119
Analog Close Hauled Wind/VMG repeater
E22121
Analog Compass repeater
E22122
Analog Rudder Reference indicator
E22123
Analog Wind repeater
SeAtalkng Next Generation Data Bus
A fast CAN based network, SeaTalkng enables the simple interconnection of multiple
ST70 instruments, transducers and NMEA2000 compatible devices. Small diameter
cables and color coded connectors make SeaTalkng networks easy and straightforward
to install. In addition to networking, ST70 displays and transducer pods receive
power from the SeaTalkng bus, eliminating the need for additional power cables and
simplifying installation.
SeaTalkng Features include:
• Color coded and keyed connectors for foolproof installation of backbones and spurs
• Very small diameter connectors (11.0mm) for passing through bulkheads and in
areas with limited access
• Rugged and waterproof (IP67) with positive locking connectors
• Quick and easy to install (including blind and limited access conditions)
• NMEA2000 compatible using optional SeaTalkng to DeviceNet adapter cables
SeaTalkng Transducer Options
SeaTalkng transducer pods for use with depth, speed and wind transducers (pods
and transducers are sold individually) Smart™ transducers do not require a pod
and connect directly to the SeaTalkng databus.
200 kHz Depth transducer
and SeaTalkng depth pod
Speed transducer and
SeaTalkng speed pod
235 kHz Depth and Temperature
Smart™ Transducer with 12
degree tilted element
Wind sensor and
SeaTalkng wind pod
235 kHz Depth, Temperature
and Speed Smart™ Transducer
ST70 NETWORK DIAGRAM
sEatalkng cables and connectors
Backbone Cables
PART #
DESCRIPTION
A06033
1 ft 3 in (400mm) Backbone Cable
A06034
3 ft 3 in (1m) Backbone Cable
A06035
9 ft 10 in (3m) Backbone Cable
A06036
16 ft 4 in (5m) Backbone Cable
A06037
65 ft 7 in (20m) Backbone Cable
A25062
Backbone kit- Comprises: Two terminators, one 65 ft 7 in (20m) backbone cable, two 16 ft 4 in (5m)
Backbone cables, four T-Piece connectors, one power cable, one SeaTalkng Reference Manual
Spur Cables
PART #
DESCRIPTION
A06038
1 ft 3 in (400mm) Spur Cable
A06039
3 ft 3 in (1m) Spur Cable
A06040
9 ft 10 in (3m) Spur Cable
A06041
16 ft 4 in (5m) Spur Cable
A06042
1 ft 3 in (400mm) Elbow Spur Cable - For spurs in confined spaces
A06049
Power Cable- Connects SeaTalkng 12 V dc supply
A06043
1m Stripped end spur cable - Connects products which do not have plug in connectors ( e.g. transducer pods)
A06044
3m Stripped end spur cable - Connects products which do not have plug in connectors ( e.g. transducer pods)
Adapters, T Pieces & Connectors
PART #
DESCRIPTION
A06028
T Piece- Connects one spur to backbone
A06064
5-Way Connector- Connects three spurs to backbone
A06030
Backbone Extender- Connects two backbone cables
A06031
Terminator- Fitted at each end of backbone
A06032
Blanking Plug- Inserted into unused spur connector positions in 5-way connector & T Piece
A06047
SeaTalk Adapter Cable- Connects SeaTalkng products to SeaTalk(1)
A06048
Seatalk2 Adapter Cable- Connects SeaTalkng products to SeaTalk2
A06045
DeviceNet Female Adapter Cable- Connects SeaTalkng products to NMEA2000
A06046
DeviceNet Male Adapter Cable- Connects SeaTalkng products to NMEA2000
A06061
E-Series Adapter Cable- Connects SeaTalkng products to Raymarine E-Series Displays
ST70 Plus Power Pilot/Instrument
& ST70 Plus Sail Pilot Keypads
5.35”(136mm)
5.98”(152mm)
ST70 Plus Display
.26” 1.67”
(6.5mm)(42.3mm)
7.44”(189mm)
3.62”(92mm)
Transducer Pod
Flush
Mount
0.95"
(24 mm)
0.95"
(24 mm)
3.54 in (90 mm)
diameter
4.53 in (115mm)
ST60 Plus Flush Mount
3.54 in (90mm)
ST60 Plus Surface Mount
4.33 in (110mm)
4.90 in (124 mm)
1.54 in .94 in
(39mm) (24mm)
ST60 Plus Speed
and Depth Transducer
2” (51mm)
1.42”
(36 mm)
2.6” (66 mm)
0.25”
1.4”
(6.50 mm)(35 mm)
ST40 Display
4.96”(126mm)
2.95” (75mm)
ST40 Speed
and Depth Transducer
Rotavecta Wind Transducer
2.95”(75mm)
2.60”(66mm)
14.57”(370mm)
2.01”
(51mm)
2.95”(75mm)
2.01”
(51mm)
2.95”(75mm)
2.64”
(67mm)
Wind Transducer
SmartController
9.76”(248mm)
1.50”(38mm)
1.5 “
(38.8 mm)
2.44”(68mm)
2.3”
(58.5 mm)
10.71”(272mm)
21.20”(538.5mm)
.83” .67”
(21mm) (17mm)
15.16”(385mm)
3.5” (89mm)
3.94” (100mm)
2.17” (55mm)
2.76” (70mm)
2” (51mm)
2.95” (75mm)
490 in (124 mm)
4.33"(110mm)
4.1" (104mm)
4.53"(115mm)
Surface
Mount
4.61”(117mm)
ST70 Display
.26”
1.38”
(6.5mm) (35mm)
5.82” (148 mm)
EXPLORE RAYMARINE PRODUCTS ONLINE
www.raymarine.com
• Extensive product information and video tutorials
• Expert technical advice and FAQs
• Connect with authorized Raymarine dealers
• Stay connected with the latest Raymarine news on our Insider Blog
Raymarine Inc.
21 Manchester Street
Merrimack, NH 03054
USA
Tel: 603.881.5200
Fax: 603.864.4756
www.raymarine.com
Raymarine plc.
Marine House, 5 Harbourgate,
Southampton Road, Portsmouth,
Hampshire PO6 4BQ, UK.
Tel: +44(0)23 9269 3611
Fax: +44(0)23 9269 4642
www.raymarine.co.uk
Additional information, specifications and
interactive product tours available online
at www.raymarine.com
Product specifications subject to change
without notice
LIT82304 - 0909
Learn about all our new products. Go to www.raymarine.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement