Acer | ICONIA W7 | User manual | Acer ICONIA W7 User manual

- 1
© 2012. All Rights Reserved.
Acer ICONIA User Manual
Models: W700 / W700P
First issue: 19 September 2012
Safety and comfort
First things first
5 Acer Ring
15 Device Control
Your guides ...................................................... 15
Basic care and tips for using your
computer .......................................................... 15 Navigating media and photos ..........................
Shared files ..............................................
Turning your computer on and off............. 15
Which devices are compatible? ...............
Taking care of your computer ................... 16
Playing to another device.........................
Taking care of your AC adapter ................ 17
Cleaning and servicing.............................. 17 Screen orientation
Your Acer tablet PC tour
19 and G-sensor
Tablet PC ......................................................... 19
Front view ................................................ 20
Back view ................................................. 21
Top view ................................................... 21
Bottom view ............................................. 22
Left/right views ........................................ 23
LED Indicators .......................................... 25
Connect the tablet to the cradle ....................... 25
Tablet cradle .................................................... 26
Front view ................................................ 27
Back view (stand not shown) ................... 28
Left view (stand not shown) ...................... 29
Environment ..................................................... 30
Power management
Acer Green Instant On..................................... 44
Saving power................................................... 45
Battery pack
Battery pack characteristics.............................
Charging the battery.................................
Optimizing battery life...............................
Checking the battery level........................
Battery-low warning..................................
Securing your computer
Universal Serial Bus (USB)
Using passwords ............................................. 53
Entering passwords.................................. 54
HDMI Micro
32 Frequently asked questions
Using the virtual keyboard
Wireless networks
Connecting to the Internet................................ 35
Wireless networks ............................................ 35
Requesting service ..........................................
Tips and hints for using Windows 8.................
Three concepts you might want to
keep in mind.............................................
How do I access the charms? ..................
How do I get to Start? ..............................
Table of contents - 3
How do I jump between apps?.................. 59
How do I turn off my computer?................ 59
Why is there a new interface?................... 59
How do I unlock my computer?................. 59
How do I personalize my computer?......... 60
I want to use Windows in the way
that I'm used to - give me my
desktop back!............................................ 61
Where are my apps?................................. 61
What is a Microsoft ID (account)?............. 63
How do I add a favorite to Internet
Explorer?................................................... 63
How do I check for Windows
4 - Table of contents
updates? ..................................................
Where can I get more information?..........
Troubleshooting tips.................................
Error messages........................................
Recovering your system
BIOS utility
Boot sequence................................................. 68
Setting passwords ........................................... 68
Regulations and safety notices
Read these instructions carefully. Keep this document for future reference. Follow all
warnings and instructions marked on the product.
Turning the product off before cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
Accessing the power cord
Be sure that the power outlet you plug the power cord into is easily accessible and located
as close to the equipment operator as possible. When you need to disconnect power to
the equipment, be sure to unplug the power cord from the electrical outlet.
Disconnecting the power source
Observe the following guidelines when connecting and disconnecting power to the power
supply unit:
Install the power supply unit before connecting the power cord to the AC power outlet.
Unplug the power cord before removing the power supply unit from the computer.
If the system has multiple sources of power, disconnect power from the system by
unplugging all power cords from the power supplies.
Using electrical power
- This product should be operated from the type of power indicated on the marking
label. If you are not sure of the type of power available, consult your dealer or local
power company.
- Do not allow anything to rest on the power cord. Do not locate this product where
people will walk on the cord.
Safety and comfort - 5
- If an extension cord is used with this product, make sure that the total ampere rating
of the equipment plugged into the extension cord does not exceed the extension cord
ampere rating. Also, make sure that the total rating of all products plugged into the
wall outlet does not exceed the fuse rating.
- Do not overload a power outlet, strip or receptacle by plugging in too many devices.
The overall system load must not exceed 80% of the branch circuit rating. If power
strips are used, the load should not exceed 80% of the power strip's input rating.
- This product's AC adapter is equipped with a three-wire grounded plug. The plug only
fits in a grounded power outlet. Make sure the power outlet is properly grounded
before inserting the AC adapter plug. Do not insert the plug into a non-grounded
power outlet. Contact your electrician for details.
- Warning! The grounding pin is a safety feature. Using a power outlet that is not
properly grounded may result in electric shock and/or injury.
- Note: The grounding pin also provides good protection from unexpected noise
produced by other nearby electrical devices that may interfere with the performance
of this product.
- The system can be powered using a wide range of voltages; 100 to 120 or 220 to 240
V AC. The power cord included with the system meets the requirements for use in
the country/region where the system was purchased. Power cords for use in other
countries/regions must meet the requirements for that country/region. For more
information on power cord requirements, contact an authorized reseller or service
Protecting your hearing
- Warning! Permanent hearing loss may occur if earphones or
headphones are used at high volume for prolonged periods of time.
To protect your hearing, follow these instructions.
- Increase the volume gradually until you can hear clearly and comfortably.
- Do not increase the volume level after your ears have adjusted.
- Do not listen to music at high volumes for extended periods.
6 - Safety and comfort
- Do not increase the volume to block out noisy surroundings.
- Decrease the volume if you can't hear people speaking near you.
Bundled dummy cards
- Note: Information in this section may not apply to your computer.
Your computer shipped with plastic dummies installed in the card slots. Dummies protect
unused slots from dust, metal objects or other particles. Save the dummies for use when
no cards are in the slots.
- Do not use this product near water.
- Do not place this product on an unstable cart, stand or table. If the product falls, it
could be seriously damaged.
- Slots and openings are provided for ventilation to ensure reliable operation of the
product and to protect it from overheating. These openings must not be blocked or
covered. The openings should never be blocked by placing the product on a bed, sofa,
rug or other similar surface. This product should never be placed near or over a radiator
or heat register, or in a built-in installation unless proper ventilation is provided.
- Never push objects of any kind into this product through cabinet slots as they may
touch dangerous voltage points or short-out parts that could result in a fire or electric
shock. Never spill liquid of any kind onto or into the product.
- To avoid damage of internal components and to prevent battery leakage, do not
place the product on a vibrating surface.
- Never use it under sporting, exercising, or any vibrating environment which will
probably cause unexpected short current or damage rotor devices, HDD, Optical
drive, and even exposure risk from lithium battery pack.
- The bottom surface, areas around ventilation openings and AC adapter may get hot.
To avoid injury, ensure they do not come in contact with your skin or body.
- Your device and its enhancements may contain small parts. Keep them out of the
reach of small children.
Safety and comfort - 7
Product servicing
Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage points or other risks. Refer all servicing to qualified
service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service personnel
- The power cord or plug is damaged, cut or frayed.
- Liquid was spilled into the product.
- The product was exposed to rain or water.
- The product has been dropped or the case has been damaged.
- The product exhibits a distinct change in performance, indicating a need for service.
- The product does not operate normally after following the operating instructions.
- Note: Adjust only those controls that are covered by the operating instructions, since
improper adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to normal condition.
Guidelines for safe battery usage
This computer uses a Lithium-ion or Lithium-polymer battery. Do not use it in a humid, wet
or corrosive environment. Do not put, store or leave your product in or near a heat source,
in a high temperature location, in strong direct sunlight, in a microwave oven or in a
pressurized container, and do not expose it to temperatures over 60° C (140° F). Failure
to follow these guidelines may cause the battery to leak acid, become hot, explode or
ignite and cause injury and/or damage.
Do not pierce, open or disassemble the battery. If the battery leaks and you come into
contact with the leaked fluids, rinse thoroughly with water and seek medical attention
For safety reasons, and to prolong the lifetime of the battery, charging will not occur at
temperatures below 0° C (32° F) or above 40° C (104° F).
8 - Safety and comfort
The full performance of a new battery is achieved only after two or three complete charge
and discharge cycles. The battery can be charged and discharged hundreds of times, but
it will eventually wear out. When the operation time becomes noticeably shorter than
normal, refer to qualified service personnel. Use only the approved batteries, and
recharge your battery only with the approved chargers designated for this device.
Never use any charger or battery that is damaged.
The capacity and lifetime of the battery will be reduced if the battery is left in hot or cold
places, such as in a closed car in summer or winter. Always try to keep the battery
between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work
temporarily, even when the battery is fully charged. Battery performance is especially
limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may also explode if
damaged. Dispose of batteries according to local regulations. Please recycle when
possible. Do not dispose as household waste.
- Note: Please refer to for battery shipping documents.
- Warning! Batteries may explode if not handled properly. Do not disassemble or
dispose of them in fire. Keep them away from children. Follow local regulations
when disposing of used batteries.
- Warning! For safety reasons, turn off all wireless or radio transmitting devices
when using your computer under the following conditions. These devices may
include, but are not limited to: wireless LAN (WLAN), Bluetooth and/or 3G.
Remember to follow any special regulations in force in any area, and always switch off
your device when its use is prohibited or when it may cause interference or danger. Use
the device only in its normal operating positions. This device meets RF exposure
guidelines when used normally, and it and its antenna are positioned at least 1.5
centimeters (5/8 inch) away from your body. It should not contain metal and you should
position the device the above-stated distance from your body. To successfully transmit
data files or messages, this device requires a good quality connection to the network. In
Safety and comfort - 9
some cases, transmission of data files or messages may be delayed until such a
connection is available. Ensure that the above separation distance instructions are
followed until the transmission is completed. Parts of the device are magnetic. Metallic
materials may be attracted to the device, and persons with hearing aids should not hold
the device to the ear with the hearing aid. Do not place credit cards or other magnetic
storage media near the device, because information stored on them may be erased.
Operation of any radio transmitting equipment, including wireless phones, may interfere
with the functionality of inadequately protected medical devices. Consult a physician or
the manufacturer of the medical device to determine if they are adequately shielded from
external RF energy or if you have any questions. Switch off your device in health care
facilities when any regulations posted in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that could be sensitive to external RF
Pacemakers. Pacemaker manufacturers recommend that a minimum separation of 15.3
centimeters (6 inches) be maintained between wireless devices and a pacemaker to avoid
potential interference with the pacemaker. These recommendations are consistent with
the independent research by and recommendations of Wireless Technology Research.
Persons with pacemakers should do the following:
- Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker
- Not carry the device near your pacemaker when the device is switched on.
If you suspect interference, switch off your device, and move it.
Hearing aids. Some digital wireless devices may interfere with some hearing aids. If
interference occurs, consult your service provider.
RF signals may affect improperly installed or inadequately shielded electronic systems in
motor vehicles such as electronic fuel injection systems, electronic anti-skid (anti-lock)
braking systems, electronic speed control systems, and air bag systems. For more
information, check with the manufacturer, or its representative, of your vehicle or any
10 - Safety and comfort
equipment that has been added. Only qualified personnel should service the device, or
install the device in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty that may apply to the device. Check regularly that all wireless
equipment in your vehicle is mounted and operating properly. Do not store or carry
flammable liquids, gases, or explosive materials in the same compartment as the device,
its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags
inflate with great force. Do not place objects, including installed or portable wireless
equipment in the area over the air bag or in the air bag deployment area. If in-vehicle
wireless equipment is improperly installed, and the air bag inflates, serious injury could
result. Using your device while flying in aircraft is prohibited. Switch off your device before
boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to
the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.
Switch off your device when in any area with a potentially explosive atmosphere and obey
all signs and instructions. Potentially explosive atmospheres include areas where you
would normally be advised to turn off your vehicle engine. Sparks in such areas could
cause an explosion or fire resulting in bodily injury or even death. Switch off the device at
refueling points such as near gas pumps at service stations. Observe restrictions on the
use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or
where blasting operations are in progress. Areas with a potentially explosive atmosphere
are often, but not always, clearly marked. They include below deck on boats, chemical
transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or
butane), and areas where the air contains chemicals or particles such as grain, dust or
metal powders. Do not switch the computer on when wireless phone use is prohibited or
when it may cause interference or danger.
- Warning! You cannot make emergency calls through this device. To make an
emergency call you shall dial out through your mobile phone or other
telephone call system.
Safety and comfort - 11
Do not throw this electronic device into the trash when discarding. To minimize
pollution and ensure utmost protection of the global environment, please
recycle. For more information on the Waste from Electrical and Electronics
Equipment (WEEE) regulations, visit
Computer users may complain of eyestrain and headaches after prolonged use. Users
are also at risk of physical injury after long hours of working in front of a computer. Long
work periods, bad posture, poor work habits, stress, inadequate working conditions,
personal health and other factors greatly increase the risk of physical injury.
Incorrect computer usage may lead to carpal tunnel syndrome, tendonitis, tenosynovitis
or other musculoskeletal disorders. The following symptoms may appear in the hands,
wrists, arms, shoulders, neck or back:
- Numbness, or a burning or tingling sensation.
- Aching, soreness or tenderness.
- Pain, swelling or throbbing.
- Stiffness or tightness.
- Coldness or weakness.
If you have these symptoms, or any other recurring or persistent discomfort and/or pain
related to computer use, consult a physician immediately and inform your company's
health and safety department.
The following section provides tips for more comfortable computer use.
Finding your comfort zone
Find your comfort zone by adjusting the viewing angle of the monitor, using a footrest, or
raising your sitting height to achieve maximum comfort. Observe the following tips:
- Refrain from staying too long in one fixed posture.
- Avoid slouching forward and/or leaning backward.
12 - Safety and comfort
- Stand up and walk around regularly to remove the strain on your leg muscles.
- Take short rests to relax your neck and shoulders.
- Avoid tensing your muscles or shrugging your shoulders.
- Install the external display, keyboard and mouse properly and within comfortable
- If you view your monitor more than your documents, place the display at the center
of your desk to minimize neck strain.
Taking care of your vision
Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room
lighting, poorly focused screens, very small typefaces and low-contrast displays could
stress your eyes. The following sections provide suggestions on how to reduce eyestrain.
- Rest your eyes frequently.
- Give your eyes regular breaks by looking away from the monitor and focusing on a
distant point.
- Blink frequently to keep your eyes from drying out.
- Keep your display clean.
- Keep your head at a higher level than the top edge of the display so your eyes point
downward when looking at the middle of the display.
- Adjust the display brightness and/or contrast to a comfortable level for enhanced text
readability and graphics clarity.
- Eliminate glare and reflections by:
placing your display in such a way that the side faces the window or any light source,
minimizing room light by using drapes, shades or blinds,
using a task light,
changing the display's viewing angle,
Safety and comfort - 13
using a glare-reduction filter,
using a display visor, such as a piece of cardboard extended from the display's top
front edge.
- Avoid adjusting your display to an awkward viewing angle.
- Avoid looking at bright light sources for extended periods of time.
Developing good work habits
The following work habits make computer use more relaxing and productive:
- Take short breaks regularly and often.
- Perform some stretching exercises.
- Breathe fresh air as often as possible.
- Exercise regularly and maintain a healthy body.
- Warning! We do not recommend using the computer on a couch or bed. If this
is unavoidable, work for only short periods, take breaks regularly, and do some
stretching exercises.
- Note: For more information, please refer to "Regulations and safety notices" on
page 69.
14 - Safety and comfort
We would like to thank you for making an Acer comptuer your choice for
meeting your mobile computing needs.
Your guides
To help you use your Acer computer, we have designed a set of guides:
First off, the setup poster helps you get started with setting up your
The Quick Guide introduces you to the basic features and functions of
your new computer.
The User’s Manual contains detailed information on such subjects as
system utilities, data recovery, expansion options and troubleshooting. In
addition it contains general regulations and safety notices for your
computer. It is available in Apps (swipe upwards from the bottom of the
screen and tap All apps then tap Acer User’s Manual from the list).
Alternatively, swipe the right-hand edge of the screen inwards and tap
Search, tap the text box to open the onscreen keyboard and start typing
'User’s Manual' to display the results; tap Acer User’s Manual.
Basic care and tips for using your computer
Turning your computer on and off
To turn the power off completely, do any of the following:
First things first - 15
• Press and hold the power button for at least four seconds (the power
button’s battery LED should be off).
• Tap the Settings charm > Change PC settings > General. Under
"Advanced startup", tap Restart now. The "Choose an option" screen
displays. Tap Turn off your PC.
To put the computer in hibernate, do the following:
• Use the Windows shutdown command: Tap the Settings charm >
Power > Shut Down.
If you need to power down the computer for a short while, but don’t want
to completely shut it down, you can put it into Sleep mode by:
• pressing the power button.
- OR Tapping the Settings charm > Power > Sleep.
Note: If you cannot power off the computer normally, press and hold
the power button for more than four seconds to shut down the
computer. If you turn off the computer and want to turn it on again, wait
at least two seconds before powering up.
Taking care of your computer
Your computer will serve you well if you take care of it.
• Do not expose the computer to direct sunlight. Do not place it near
sources of heat, such as a radiator.
• Do not expose the computer to temperatures below 0º C (32º F) or
above 50º C (122º F).
16 - First things first
• Do not subject the computer to magnetic fields.
• Do not expose the computer to rain or moisture.
• Do not spill water or any liquid on the computer.
• Do not subject the computer to heavy shock or vibration.
• Do not expose the computer to dust or dirt.
• Never place objects on top of the computer.
• Do not slam the computer display when you close it.
• Never place the computer on uneven surfaces.
Taking care of your AC adapter
Here are some ways to take care of your AC adapter:
• Do not connect the adapter to any other device.
• Do not step on the power cord or place heavy objects on top of it.
Carefully route the power cord and any cables away from foot traffic.
• When unplugging the power cord, do not pull on the cord itself but pull
on the plug.
• The total ampere ratings of the equipment plugged in should not exceed
the ampere rating of the cord if you are using an extension cord. Also,
the total current rating of all equipment plugged into a single wall outlet
should not exceed the fuse rating.
Cleaning and servicing
When cleaning the computer, follow these steps:
First things first - 17
1. Turn off the computer.
2. Disconnect the AC adapter.
3. Use a soft, moist cloth. Do not use liquid or aerosol cleaners.
If either of the following occurs:
• The computer has been dropped or the body has been damaged;
• The computer does not operate normally
Please refer to "Frequently asked questions" on page 55.
18 - First things first
After setting up your computer as illustrated in the setup poster, let us
show you around your new Acer computer.
You can enter information into you new computer via the touchscreen.
Tablet PC
Your new computer has two components: the tablet and the tablet cradle.
The following set of images will show you both of these. The views are
labeled as if you are holding the Tablet with the screen towards you and
the camera at the top.
Your Acer tablet PC tour - 19
Front view
1 2
No. Item
indicator light
Windows key
20 - Your Acer tablet PC tour
Lights up when camera is active.
Web camera for video communication.
Press once to open the Start menu.
Back view
Integrated webcam Web camera for video communication.
Camera indicator
Lights up when camera is active.
Top view
No. Item
Lock switch
Locks the screen orientation.
Your Acer tablet PC tour - 21
No. Item
Ventilation and
cooling fan
Allows the computer to stay cool.
Do not cover or obstruct the openings.
Note: Display orientation may be fixed when apps designed for a
specific orientation are running. These include games and other fullscreen apps. When making video calls, you should always hold the
tablet in landscape orientation.
Bottom view
No. Item
Reset button
22 - Your Acer tablet PC tour
Insert a paperclip into the hole and press for
four seconds to reset the computer (simulates
removing and reinstalling the battery).
Delivers stereo audio output.
Left/right views
No. Icon
micro HDMI port
USB 3.0 port
Internal microphone for sound
Supports high-definition digital video
Connects to USB devices.
A USB 3.0 port can be distinguished
by its blue connector (see below).
When using the cradle’s USB ports, it
is recommended to plug in the power
Your Acer tablet PC tour - 23
No. Icon
DC-in jack
Connects to an AC adapter.
Press to turn the tablet on; press
again to place the tablet in Sleep
Power button
mode. Press and hold to turn the
tablet off.
Indicates the computer's battery
status. See
1. Charging: Amber.
Battery LED
2. Fully charged: Blue when plugged
Press to increase or decrease
Volume key
Connects to audio devices
(e.g., speakers, headphones) or a
headset with microphone.
Information on USB 3.0
• Compatible with USB 3.0 and earlier USB devices.
• For optimal performance, use USB 3.0-certified devices.
• Defined by the USB 3.0 (SuperSpeed USB) specification.
24 - Your Acer tablet PC tour
LED Indicators
LED color State
On briefly
On briefly
The computer is fully charged and plugged in.
The computer is fully charged and running on
battery power.
After pressing the power button, the blue LED
stays lit for a few seconds before turning off.
The computer is charging and plugged in.
The computer is not fully charged and running
on battery power.
After pressing the power button, the amber
LED stays lit for a few seconds before turning
The battery is critically low or abnormal battery
The computer is off.
Connect the tablet to the cradle
This multi-position cradle makes it simple to dock your tablet because you
don’t have to worry about aligning ports and connectors or placing the
Your Acer tablet PC tour - 25
tablet at the correct angle. Simply rest the tablet in the cradle and slide it
to the left until it stops.
Tablet cradle
The following set of images show you the bundled cradle.
NOTE: In some countries the cradle is optional.
26 - Your Acer tablet PC tour
Front view
No. Icon
USB connector
Connects to the tablet’s USB port.
DC-out jack
Provides power from the cradle to the
Your Acer tablet PC tour - 27
Back view (stand not shown)
No. Item
Portrait view
view slot
28 - Your Acer tablet PC tour
Insert the stand here to rest the tablet in portrait
Insert the stand here to rest the tablet in
landscape view.
Left view (stand not shown)
No. Icon
USB 3.0 ports
DC-in jack
Connect to USB devices.
A USB 3.0 port can be distinguished
by its blue connector (see below).
Provides power to the cradle.
Information on USB 3.0
Your Acer tablet PC tour - 29
• Compatible with USB 3.0 and earlier USB devices.
• For optimal performance, use USB 3.0-certified devices.
• Defined by the USB 3.0 (SuperSpeed USB) specification.
• Temperature:
• Operating: 5 °C to 35 °C
• Non-operating: -20 °C to 65 °C
• Humidity (non-condensing):
• Operating: 20% to 80%
• Non-operating: 20% to 80%
30 - Your Acer tablet PC tour
The USB port is a high-speed serial bus which allows you to connect USB
peripherals without taking up system resources.
Universal Serial Bus (USB) - 31
HDMI (High-Definition Multimedia Interface) is an industry-supported,
uncompressed, all-digital audio/video interface. HDMI provides an
interface between any compatible digital audio/video source, such as a
set-top box, DVD player, and A/V receiver and a compatible digital audio
and/or video monitor, such as a digital television (DTV), over a single
Use the HDMI Micro port on your computer to connect with high-end audio
and video equipment. Single cable implementation allows tidy setup and
fast connection.
32 - HDMI Micro
Microsoft Windows provides a convenient virtual keyboard for entering
data. There are several ways to display the keyboard:
Tap inside any text field to display the Windows virtual keyboard.
Using the virtual keyboard - 33
From Desktop, tap the Keyboard icon in the system tray to display the
keyboard. Tap the "x" in the keyboard’s top-right corner to close the
34 - Using the virtual keyboard
Connecting to the Internet
Your computer's wireless connection is turned on by default.
Windows will detect and display a list of available networks during setup.
Select your network and enter the password if required.
Otherwise, open Internet Explorer and follow the instructions.
Please refer to your ISP or router documentation.
Wireless networks
A wireless LAN or WLAN is a wireless local area network, which may link
two or more computers without using wires. Setting up a wireless network
is easy and allows you to share files, peripheral devices and an Internet
What are benefits of a wireless network?
Wireless LAN systems allow you and other users of your home network to
share access to files and devices connected to the network, for example a
printer or scanner.
Also you can share an internet connection with other computers in your home.
Wireless networks - 35
Installation speed and simplicity
Installing a wireless LAN system can be fast and easy and eliminates the
need to pull cables through walls and ceilings.
Components of a wireless LAN
To set up your Wireless network at home you need to have the following:
Access point (router)
Access points (routers) are two-way transceivers that broadcast data into the
surrounding environment. Access points act as a mediator between wired
and wireless network. Most routers have a built-in DSL modem that will allow
you access to a high speed DSL internet connection. The ISP (Internet
Service Provider) you have chosen normally supplies a modem/router with
the subscription to their services. Read carefully the documentation supplied
with your Access point/router for detailed setup instructions.
36 - Wireless networks
Acer Ring incorporates a number of useful functions and tools in one
easy-to-use interface. Tap the touchscreen with all five fingers at once to
display Acer Ring.
Import documents here for quick access.
View pictures stored in your computer.
Device Control
Adjust settings for your computer (please
refer to "Device Control" on page 39).
Acer Ring - 37
Play videos stored in your computer.
Favorite Apps
Quickly access your favorite desktop
Play music stored in your computer.
Controls visible from Acer Ring include
Previous track, Play, and Next track. A
volume slider control is located on the
right side of Acer Ring.
To the left of Acer Ring you can see a selection of AppCards. These
AppCards are thumbnails of links, files, or apps depending on what
section you have selected from Acer Ring. Scroll through the AppCards
and tap on a card to open it.
38 - Acer Ring
Device Control is a convenient way for you to access frequently-used
computer controls: adjust the screen brightness, turn on or off the
backlight, toggle wireless connectivity technologies on or off, and enable
or disable Acer gestures (such as Acer Ring’s five finger tap).
Device Control - 39
Note: Only for certain models.
With Acer, you can enjoy videos, photos and music. Stream media
from, or to, other devices with Acer installed.
Note: All devices must be connected to the same network.
To watch videos or listen to music open Media, to browse photos
open Photo.
Important: When you first open a application, Windows
Firewall will ask for permission to allow to access the network.
Select Allow Access in each window.
Navigating media and photos
The list in the left panel shows your computer (’My Library’), then other
devices if any are connected to your network (’Home Shared’).
To view files on your computer, select one of the categories under ’My
Library’, then browse the files and folder on the right.
40 - Acer
Shared files
Devices connected to your network are shown in the Home Shared
section. Select a device, then the select the category to explore.
After a short delay, shared files and folders are shown on the right.
Browse to the file you want to play, then double-click to start playback.
Use the media controls in the bar across the bottom of the screen to
control playback. For example, when music is selected, you can play,
pause or stop playback, and adjust the volume.
Note: You must activate sharing on the device that stores the files.
Open on the device that stores the files, select Edit then make
sure Share my library on local network is active.
Which devices are compatible?
Certified Acer devices with or DLNA software can be used with the software. These include DLNA-compliant PCs, smartphones, and
NAS (Network Attached Storage) devices.
Acer - 41
Playing to another device
If you want to play the media on another device, you need to do the
1. In the bottom right corner, select Play to.
2. Select the remote device that will be used to play the file.
Note: Only devices optimised for playback are available in this list,
certain PCs and storage devices will not appear. To add a Windows PC
to this list, open Windows Media Player, select Stream and Allow
remote control of my Player...
3. Select a file in the main window, then use the media controls in the bar
across the bottom of the screen to control the remote device.
For more help, go to
42 - Acer
Your computer has a built-in accelerometer that detects the tablet’s
orientation and automatically rotates the screen to suit the orientation.
You can lock the screen orientation by using the lock switch. The
orientation may also be locked at other times, including:
• When the tablet is attached to the cradle.
• With an HDMI cable is plugged in.
• When programs designed for a specific orientation are running.
Note: You are advised to keep your tablet in landscape orientation
with the webcam above the screen while you are making a video call.
Please rotate your display to the landscape orientation and use the
lock switch to set the orientation before starting a video call.
The screen orientation lock status will be indicated via icons briefly
displayed onscreen when the status changes.
Screen orientation and G-sensor - 43
This computer has a built-in power management unit that monitors system
activity. System activity refers to any activity involving one or more of the
following devices: keyboard, mouse, hard disk, peripherals connected to
the computer, and video memory. If no activity is detected for a period of
time, the computer stops some or all of these devices in order to conserve
Acer Green Instant On
Note: For selected models only.
The Acer Green Instant On feature allows your computer to wake up from
Sleep mode in less than the time it takes to open the lid. When you close
the lid, or leave your computer for a while, your computer enters Sleep
mode. While the computer is in Sleep mode, the power indicator LED will
flash orange.
Open the lid or press any key to wake the computer from Sleep mode.
After a certain amount of time in Sleep mode, the computer will
automatically enter Deep Sleep to preserve battery life. When the
computer is in Deep Sleep, the power indicator LED will be turned off. In
this state, battery remains ready to use for many weeks.
Press the power button to wake up from Deep Sleep.
44 - Power management
Note: Once in Deep Sleep, your PC will consume significantly less
power compared with Sleep mode, but it will take a little longer to wake
up from Deep Sleep.
Deep Sleep and Sleep mode work together to ensure that your computer
saves as much power as possible while still enabling quick, instant on
To save more power, your computer will typically enter and stay in Deep
Sleep during times when it will not be frequently accessed, for example,
during the middle of the night. To provide quicker access, your computer
will enter and stay in Sleep mode during times when it will be frequently
accessed, for example, during working hours.
Saving power
Disable Fast startup
Your computer uses Fast startup to start quickly, but also uses a small
amount of power to check for signals to start. These checks will slowly
drain your computer’s battery.
If you prefer to reduce your computer’s power requirements and
environmental impact, turn off Fast startup:
Note: If Fast startup is off, your computer will take longer to start from
Sleep. If your computer features Acer Instant On or Acer Always
Connect, these will also be turned off.
Your computer will also not start if it receives an instruction to start
over a network (Wake on LAN).
Power management - 45
1. Open the Desktop.
2. Click Power Options in the Notification area.
3. Select More Power Options.
4. Select Choose what the power buttons do.
5. To access Shutdown Settings, select Change settings that are
currently unavailable.
46 - Power management
6. Scroll down and disable Turn on fast startup.
7. Select Save changes.
Power management - 47
The computer uses an embedded battery pack that gives you long use
between charges.
Battery pack characteristics
The battery pack has the following characteristics:
• Employs current battery technology standards.
• Delivers a battery-low warning.
The battery is recharged whenever you connect the computer to the AC
adapter. Your computer supports charge-in-use, enabling you to recharge
the battery while you continue to operate the computer. However,
recharging with the computer turned off results in a significantly faster
charge time.
Charging the battery
The preferred method of charging your computer is to use the bundled
cradle. Plug the AC adapter into the cradle and connect to a power outlet.
Insert the tablet into the cradle (see "Connect the tablet to the cradle"
on page 25). You can continue to operate your computer on AC power
while your battery is charging. However, charging the battery with the
computer turned off results in a significantly faster charge time.
48 - Battery pack
Note: You are advised to charge the battery before retiring for the day.
Charging the battery overnight before traveling enables you to start
the next day with a fully charged battery.
Conditioning a new battery pack
Before you use a battery pack for the first time, there is a conditioning
process that you should follow:
1. Connect the AC adapter and fully charge the battery.
2. Disconnect the AC adapter.
3. Turn on the computer and operate using battery power.
4. Fully deplete the battery until the battery-low warning appears.
5. Reconnect the AC adapter and fully charge the battery again.
Follow these steps again until the battery has been charged and
discharged three times.
Use this conditioning process for all new batteries, or if a battery hasn't
been used for a long time.
Warning! Do not expose battery packs to temperatures below 0°
C (32° F) or above 45° C (113° F). Extreme temperatures may
adversely affect the battery pack.
By following the battery conditioning process you condition your battery to
accept the maximum possible charge. Failure to follow this procedure will
prevent you from obtaining the maximum battery charge, and will also
shorten the effective lifespan of the battery.
Battery pack - 49
In addition, the useful lifespan of the battery is adversely affected by the
following usage patterns:
• Using the computer on constant AC power.
• Not discharging and recharging the battery to its extremes, as described
• Frequent use; the more you use the battery, the faster it will reach the
end of its effective life. A standard computer battery has a life span of
more than 1,000 charges.
Optimizing battery life
Optimizing battery life helps you get the most out of battery operation,
prolonging the charge/recharge cycle and improving recharging efficiency.
You are advised to follow the suggestions set out below:
• Use AC power whenever possible, reserving battery for on-the-go use.
• Eject a PC Card if it is not being used, as it will continue to draw power
(for selected models).
• Store your PC in a cool, dry place. The recommended temperature is
10° C (50° F) to 30° C (86° F). Higher temperatures cause the battery to
self-discharge faster.
• Excessive recharging decreases the battery life.
• Look after your AC adapter and battery.
50 - Battery pack
Checking the battery level
The Windows power meter indicates the current battery level. Rest the
cursor over the battery/power icon on the taskbar to see the battery's
present charge level.
Battery-low warning
When using battery power pay attention to the Windows power meter.
Warning! Connect the AC adapter as soon as possible after the
battery-low warning appears. Data will be lost if the battery
becomes fully depleted and the computer shuts down.
When the battery-low warning appears, the recommended course of
action depends on your situation:
The AC adapter,
the cradle, and a
power outlet are
Recommended Action
1. Plug the AC adapter into the cradle, and then
connect to the mains power supply.
2. Insert the tablet into the cradle.
3. Save all necessary files.
4. Resume work.
Turn off the computer if you want to recharge the
battery rapidly.
Battery pack - 51
Recommended Action
1. Plug the AC adapter into the computer, and then
connect to the mains power supply.
The AC adapter
2. Save all necessary files.
and a power outlet
3. Resume work.
are available.
Turn off the computer if you want to recharge the
battery rapidly.
The AC adapter or 1. Save all necessary files.
2. Close all applications.
a power outlet is
3. Turn off the computer.
52 - Battery pack
Your computer is a valuable investment that you need to take care of.
Learn how to protect and take care of your computer.
Using passwords
Passwords protect your computer from unauthorized access. Setting
these passwords creates several different levels of protection for your
computer and data:
• Supervisor Password prevents unauthorized entry into the BIOS utility.
Once set, you must enter this password to gain access to the BIOS
utility. See "BIOS utility" on page 68.
• User Password secures your computer against unauthorized use.
Combine the use of this password with password checkpoints on bootup and resume from Hibernation (if available) for maximum security.
• Password on Boot secures your computer against unauthorized use.
Combine the use of this password with password checkpoints on bootup and resume from Hibernation (if available) for maximum security.
Important: Do not forget your Supervisor Password! If you forget
your password, please get in touch with your dealer or an
authorized service center.
Securing your computer - 53
Entering passwords
When a password is set, a password prompt appears in the center of the
display screen.
• When the Supervisor Password is set, a prompt appears when you
enter the BIOS utility at boot-up (See "BIOS utility" on page 68).
• Type the Supervisor Password and press <Enter> to access the BIOS
utility. If you enter the password incorrectly, a warning message
appears. Try again and press <Enter>.
• When the User Password is set and the password on boot parameter is
enabled, a prompt appears at boot-up.
• Type the User Password and press <Enter> to use the computer. If you
enter the password incorrectly, a warning message appears. Try again
and press <Enter>.
Important: You have three chances to enter a password. After
each failed attempt, press the Windows key to try again. If you fail
to enter the password correctly after three tries, the system halts.
Press and hold the power button for four seconds to shut down
the computer. Then turn on the computer and enter the BIOS
utility to try again.
54 - Securing your computer
The following is a list of possible situations that may arise during the use
of your computer. Easy solutions are provided for each one.
I turned on the power, but the computer does not start or boot up.
Look at the power button’s battery LED:
• If it is not lit, no power is being supplied to the computer. Check the
• If you are using on the battery, it may be low and unable to power the
computer. Connect the AC adapter to recharge the battery pack.
• Make sure that the AC adapter is properly plugged into the cradle and
to the power outlet. Also make sure the tablet fits snug into the cradle.
Nothing appears on the screen.
The computer’s power management system automatically blanks the
screen to save power. Press the power button to turn the display back on.
If pressing a key does not turn the display back on the brightness level
might be too low. Tap the Settings charm > Screen to adjust the
brightness level.
No audio is heard from the computer.
Check the following:
Frequently asked questions - 55
• The volume may be muted. Look at the volume control (speaker) iconby
tapping the Settings charm > Volume. If the speaker has an "x" next to
it, tap on the Volume icon to display the volume bar. At the top of the
bar, tap the speaker icon to un-mute.
• The volume level may be too low. Look at the volume control (speaker)
icon by tapping the Settings charm > Volume. Tap the Volume icon and
adjust the volume accordingly.
• If headphones, earphones or external speakers are connected to the
line-out port on the computer, the internal speakers automatically turn
Requesting service
International Travelers Warranty (ITW)
Your computer is backed by an International Travelers Warranty (ITW)
that gives you security and peace of mind when traveling. Our worldwide
network of service centers are there to give you a helping hand.
An ITW passport comes with your computer. This passport contains all
you need to know about the ITW program. A list of available, authorized
service centers is in this handy booklet. Read this passport thoroughly.
Always have your ITW passport on hand, especially when you travel, to
receive the benefits from our support centers. Place your proof-ofpurchase in the flap located inside the front cover of the ITW passport.
If the country you are traveling in does not have an Acer-authorized ITW
service site, you can still get in contact with our offices worldwide. Please
56 - Frequently asked questions
Before you call
Please have the following information available when you call Acer for
online service, and please be at your computer when you call. With your
support, we can reduce the amount of time a call takes and help solve
your problems efficiently. If there are error messages or beeps reported by
your computer, write them down as they appear on the screen (or the
number and sequence in the case of beeps).
You are required to provide the following information:
Telephone number:
Machine and model type:
Serial number:
Date of purchase:
Frequently asked questions - 57
Tips and hints for using Windows 8
We know this is a new operating system that will take some getting used
to, so we've created a few pointers to help you get started.
Three concepts you might want to keep in mind
1. Start
The Start button is no longer available; you can launch apps from the Start
2. Tiles
Live tiles are similar to thumbnails of the apps.
3. Charms
Charms allow you to perform useful functions, such as sharing content,
turning off your PC or changing settings.
How do I access the charms?
Swipe the right-hand edge of the screen inwards.
How do I get to Start?
Press the Windows key; or swipe the right-hand edge of the screen
inwards and tap the Start charm.
58 - Frequently asked questions
How do I jump between apps?
Swipe the left-hand edge of the screen inwards to cycle through apps that
are currently running.
How do I turn off my computer?
Swipe the right-hand edge of the screen inwards, tap Settings > Power
and select the action you'd like to take.
Why is there a new interface?
The new interface for Windows 8 is designed to work well with touch input.
Windows Store apps will automatically use the whole screen and don't
require closing in the traditional way. Windows Store apps will be
displayed on Start using live-tiles.
What are ’live tiles?’
Live tiles are similar to thumbnails of the app that will be updated with new
content whenever you're connected to the Internet. So, for example, you
can view weather or stock updates without needing to open the app.
How do I unlock my computer?
Swipe the lock screen upwards and tap a user account icon to unlock the
computer. If your account has a password set, you will need to enter the
password to continue.
Tap and hold the preview icon to see the characters you've entered to
ensure the password is correct.
Frequently asked questions - 59
How do I personalize my computer?
You can personalize Start with a different background image or by
arranging the tiles to suit your personal needs.
To change the background, swipe the right-hand edge of the screen
inwards and tap Settings > Change PC settings > Personalize. Tap
Start screen at the top of the page and select a color and image.
How do I move tiles?
Tap and hold a tile to select it, then drag it to the place on Start that you
want it to appear. Other tiles will be moved to accommodate the tile in its
new location.
Can I make tiles bigger or smaller?
Tap and drag the tile downwards and release it. Select Smaller or Larger
from the menu that appears at the bottom of the screen.
How do I personalize the Lock screen?
You can personalize the lock screen with a different image or to show you
quick status and notifications to suit your personal needs.
To change the background, swipe the right-hand edge of the screen
inwards and tap Settings > Change PC settings > Personalize. Tap
Lock screen at the top of the page and select the image and apps you
would like to see on the lock screen.
60 - Frequently asked questions
So, how do I close an app?
Swipe the window downwards from the top of the screen, and past the
halfway point of the screen.
Can I change the screen resolution?
Swipe the right-hand edge of the screen inwards and tap Search, tap the
text box to open the onscreen keyboard and start typing 'Control Panel' to
display the results; tap Control Panel > Adjust screen resolution.
I want to use Windows in the way that I'm used to - give me my
desktop back!
From Start tap the Desktop tile to see a traditional desktop. You can pin
apps you frequently use to the taskbar to easily open them.
If you click a app that is not a Windows Store app, Windows will
automatically open the app using Desktop.
Where are my apps?
Swipe the right-hand edge of the screen inwards and tap Search, type the
name of the app you would like to open using the pop-up keyboard.
Results will be displayed on the left-hand side of the screen.
To view the complete list of apps, swipe upwards from the bottom of the
screen and tap All apps.
Frequently asked questions - 61
How do I make an app appear on Start?
If you're in All apps and you want to make a app appear on Start, tap and
drag the app downwards and release it. Tap Pin to Start from the menu
that appears at the bottom of the screen.
How do I remove a tile from Start?
Tap and drag the app downwards and release it. Tap Unpin from Start
from the menu that appears at the bottom of the screen.
How do I make an app appear on my taskbar in Desktop?
If you're in All apps and you want to make a app appear on the taskbar in
Desktop, tap and drag the app downwards and release it. Select Pin to
taskbar from the menu that appears at the bottom of the screen.
How do I install apps?
You can download Windows Store apps from Store. You will need to have
a Microsoft ID to purchase and download apps from Store.
I can't find apps like Notepad and Paint! Where are they?
Swipe the right-hand edge of the screen inwards and tap Search, type the
name of the app you would like to open using the pop-up keyboard.
Alternatively, open All apps and scroll to ’Windows Accessories’ to see the
list of legacy programs.
62 - Frequently asked questions
What is a Microsoft ID (account)?
A Microsoft account is an email address and password that you use to
sign in to Windows. You can use any email address, but it is best if you
choose the one you already use to communicate with friends and sign in
to your favorite websites. When you sign in to your PC with a Microsoft
account, you'll connect your PC to the people, files, and devices you care
Do I need one?
You do not need a Microsoft ID to use Windows 8, but it makes life easier
because you can sync data across different machines you sign in to using
a Microsoft ID.
How do I get one?
If you've already installed Windows 8 and didn't sign in with a Microsoft
account or you don't have a Microsoft account and want to get one, swipe
the right-hand edge of the screen inwards and tap Settings > Change PC
settings > Users > Switch to a Microsoft account, and follow the
onscreen instructions.
How do I add a favorite to Internet Explorer?
Internet Explorer 10 doesn't have traditional favorites, instead you can pin
shortcuts to Start. Once you have the page open, swipe upwards from the
bottom edge of the screen to open the menu at the bottom of the screen.
Tap Pin to Start.
Frequently asked questions - 63
How do I check for Windows updates?
Swipe the right-hand edge of the screen inwards and tap Settings >
Change PC settings > Windows Updates. Tap Check for updates
Where can I get more information?
For more information please visit the following pages:
• Windows 8 tutorials:
• Support FAQs:
64 - Frequently asked questions
This chapter shows you how to deal with common system problems.
Read it before calling a technician if a problem occurs. Solutions to more
serious problems require opening up the computer. Do not attempt to
open the computer yourself; contact your dealer or authorized service
center for assistance.
Troubleshooting tips
This computer incorporates an advanced design that delivers onscreen
error message reports to help you solve problems.
If the system reports an error message or an error symptom occurs, see
"Error messages" below. If the problem cannot be resolved, contact your
dealer. See "Requesting service" on page 56.
Error messages
If you receive an error message, note the message and take the corrective
action. The following table lists the error messages in alphabetical order
together with the recommended course of action.
Error messages
CMOS battery bad
CMOS checksum
Corrective action
Contact your dealer or an authorized service
Contact your dealer or an authorized service
- 65
Error messages
Corrective action
Insert a system (bootable) disk into an external
Disk boot failure
drive, then press <Enter> to reboot.
Contact your dealer or an authorized service
Hard disk 0 error
Hard disk 0 extended Contact your dealer or an authorized service
type error
Contact your dealer or an authorized service
I/O parity error
If you still encounter problems after going through the corrective
measures, please contact your dealer or an authorized service center for
66 -
Your computer comes with system recovery DVDs, but does not contain
an optical disc drive (ODD). Obtain an external ODD and complete the
following steps to recover your computer to factory conditions:
1. Shutdown the computer completely by pressing and holding the power
button for more than 4 seconds or by tapping the Settings charm >
Change PC settings > General. Under "Advanced startup", tap Restart
now. The "Choose an option" screen displays. Tap Turn off your PC.
2. Connect the ODD to your computer.
3. Enter the computer’s BIOS by pressing the Windows button and the
power button at the same time.
4. Select the Boot option in the left pane.
5. Under "Boot priority order", move EFI DVD/CDROM to the number one
position using the provided instructions.
6. Select Exit in the left pane and select Exit Saving Changes on the right
7. Insert the recovery DVD, turn on your computer, and follow the
onscreen instructions.
Recovering your system - 67
The BIOS utility is a hardware configuration program built into your
computer's BIOS.
Your computer is already properly configured and optimized, and you do
not need to run this utility. However, if you encounter configuration
problems, you may need to run it.
To enter the BIOS utility, do the following:
• Ensure your computer is completely powered off (See "Turning your
computer on and off" on page 16). Press and hold the Windows
button and then press the Power button.
Boot sequence
To set the boot sequence in the BIOS utility, activate the BIOS utility, then
select the Boot option in the left pane. Under "Boot priority order", change
the sequence as desired.
Setting passwords
To set a password on boot, activate the BIOS utility, then select Security
from the left pane. Under "Set Supervisor Password", select Enter. Enter
your desired password and select OK. Under "Password on Boot:", set the
option to Enabled.
68 - BIOS utility
This device has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This device generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this device does cause harmful interference to radio or television reception, which can
be determined by turning the device off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to
maintain compliance with FCC regulations.
Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with
the Class B limits may be attached to this equipment. Operation with non-certified
peripherals is likely to result in interference to radio and TV reception.
Regulations and safety notices - 69
Caution: Changes or modifications not expressly approved by the manufacturer
could void the user's authority, which is granted by the Federal Communications
Commission, to operate this computer.
This Class B digital apparatus complies with Canadian ICES-003.
Remarque à l'intention des utilisateurs canadiens
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada.
The LCD unit is produced with high-precision manufacturing techniques. Nevertheless,
some pixels may occasionally misfire or appear as black or red dots. This has no effect
on the recorded image and does not constitute a malfunction.
Note: Below regulatory information is for models with wireless LAN and / or Bluetooth
To prevent radio interference to the licensed service, this device is intended to be
operated indoors.
This product complies with the radio frequency and safety standards of any country or
region in which it has been approved for wireless use. Depending on configurations, this
product may or may not contain wireless radio devices (such as wireless LAN and/or
Bluetooth modules). Below information is for products with such devices.
70 - Regulations and safety notices
Declaration of Conformity for EU countries
Hereby, Acer, declares that this computer is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
Wireless operation channels for different domains
N. America
2.412-2.462 GHz
Ch01 through Ch11
2.412-2.484 GHz
Ch01 through Ch14
Europe ETSI
2.412-2.472 GHz
Ch01 through Ch13
France: Restricted wireless frequency bands
Some areas of France have a restricted frequency band. The worst case maximum
authorized power indoors is:
- 10 mW for the entire 2.4 GHz band (2400 MHz - 2483.5 MHz)
- 100 mW for frequencies between 2446.5 MHz and 2483.5 MHz
Note: Channels 10 through 13 inclusive operate in the band 2446.6 MHz to 2483.5 MHz.
There are few possibilities for outdoor use: On private property or on the private property
of public persons, use is subject to a preliminary authorization procedure by the Ministry
of Defense, with maximum authorized power of 100 mW in the 2446.5 - 2483.5 MHz band.
Use outdoors on public property is not permitted.
In the departments listed below, for the entire 2.4 GHz band:
- Maximum authorized power indoors is 100 mW
- Maximum authorized power outdoors is 10 mW
Regulations and safety notices - 71
Departments in which the use of the 2400 - 2483.5 MHz band is permitted with an EIRP
of less than 100 mW indoors and less than 10 mW outdoors:
01 Ain Orientales
25 Doubs
59 Nord
71 Saone et Loire
02 Aisne
26 Drome
60 Oise
75 Paris
03 Allier
32 Gers
61 Orne
82 Tarn et Garonne
05 Hautes Alpes
36 Indre
63 Puy Du Dome
84 Vaucluse
08 Ardennes
37 Indre et Loire
88 Vosges
09 Ariege
41 Loir et Cher
64 Pyrenees
11 Aude
45 Loret
66 Pyrenees
12 Aveyron
50 Manche
67 Bas Rhin
90 Territoire de
16 Charente
55 Meuse
68 Haut Rhin
94 Val de Marne
24 Dordogne
58 Nievre
70 Haute Saone
89 Yonne
This requirement is likely to change over time, allowing you to use your wireless LAN card
in more areas within France.
Please check with ART for the latest information (
Note: Your WLAN Card transmits less than 100 mW, but more than 10 mW.
72 - Regulations and safety notices
List of national codes
This equipment may be operated in the following countries:
ISO 3166
2 letter code
ISO 3166
2 letter code
Czech Republic
United Kingdom
Exposure of humans to RF fields (RSS-102)
The computer employs low gain integral antennas that do not emit RF field in excess of
Health Canada limits for the general population; consult Safety Code 6, obtainable from
Health Canada's website at
Regulations and safety notices - 73
This device complies with RSS210 of Industry Canada.
This Class B digital apparatus complies with Canadian ICES-003, Issue 4, and RSS-210,
No 4 (Dec 2000) and No 5 (Nov 2001).
"To prevent radio interference to the licensed service, this device is intended to be
operated indoors and away from windows to provide maximum shielding. Equipment (or
its transmit antenna) that is installed outdoors is subject to licensing."
Cet appareil numérique de la classe B est conforme à la norme NMB-003, No. 4, et CNR210, No 4 (Dec 2000) et No 5 (Nov 2001).
« Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une
licence, il doit être utilisé a l'intérieur et devrait être placé loin des fenêtres afin de fournir
un écran de blindage maximal. Si le matériel (ou son antenne d'émission) est installé à
l'extérieur, il doit faire l'objet d'une licence.
Caution: When using IEEE 802.11a wireless LAN, this product is restricted to indoor
use due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada
requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25
GHz to reduce the potential for harmful interference to co-channel mobile satellite
systems. High power radar is allocated as the primary user of the 5.25 to 5.35 GHz
and 5.65 to 5.85-GHz bands. These radar stations can cause interference with and/
or damage to this device.
The maximum allowed antenna gain for use with this device is 6 dBi in order to comply
with the E.I.R.P limit for the 5.25- to 5.35 and 5.725 to 5.85 GHz frequency range in pointto-point operation.
74 - Regulations and safety notices
Ver.: 02.01.03
Download PDF