Download datasheet for BXMF1011 by API Technologies

Download datasheet for BXMF1011 by API Technologies
Frequency Multiplier (x15)
Model BXMF1011 (400 - 500 MHz)
Excellent Harmonic Performance: -50 dBc
High Input Threshold: +17 dBm
Low Sub-Harmonic Content: -60 dBc
Environmental Screening Available
Typical Specifications
Spectrum Microwave offers a complete line of low noise,
odd order SRD frequency multipliers, which exhibit excellent phase noise performance. The input signal is amplified, multiplied, and filtered at X Band. Filtering in this
series of multipliers is accomplished through a very narrow,
high Q bandpass filter.
Input Frequency
Input Level
Output Frequency
Output Level
Switching Speed
DC Power
All internal semiconductors are housed in rugged, hermetically sealed packages to ensure excellent performance
over military environmental conditions.
Additive phase noise testing is performed on each device
to ensure low phase noise/jitter performance.
Temp Range
400 to 500 MHz
+17 dBm
6 - 7.5 GHz
+3 dBm
90 nsec
-50 dBc
-60 dBc
+15 V @ 110 mA
-5 V @ 1 mA
0oC to +75oC
All specifications above measured at 25 oC
Synthesizer Building Block
Dimensions and Connections
2” L x 3.5” W x 1” H
Revision: 11/26/2012
Spectrum Microwave, Inc. • P: 888.553.7531 • F: 888.553.7532
E-mail: [email protected] •
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF