Download datasheet for 6706 by Pomona Electronics

Download datasheet for 6706 by Pomona Electronics
®
Model 6706
F Type Bulkhead / Panel
Feed Through Adapter
Features:
Adapter allows two F type male connectors to connect together, stand alone or through a
bulkhead/panel.
Maximum bulkhead or panel thickness: .250” (6,35).
Adapter is precision machined (not die-cast) from brass.
Materials:
Connector Body
Center Contact
Insulator
Nickel plated brass
Nickel plated brass
Polystyrene
Ratings:
Impedance:
Frequency:
VSWR:
Contact Resistance:
Voltage
Insulation Resistance:
Insertions:
Temperature:
75 Ohms
0 to 500 MHz
1.5 max
3 Milliohms max.
* 500 V
5,000 Megohms min.
500
-40 to +65 C
* Hands free testing in controlled voltage environment: For CE compliance: not intended for
hand held use at voltages above 33 Vrms / 70 Vdc.
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies. Made in USA
Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060
For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com
Rev: 002
D1099640
Page 1 of
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement