Miller Electric and SS-75D16 User manual

Miller Electric and SS-75D16 User manual
SECTION
L
Structured Cabling
Systems
INDEX
Multimedia Structured Cabling Systems Index
Quick Reference Guide . . . . . . . . . . . . . . . . . . . .L2
Connectors
QuickPort® . . . . . . . . . . . . . . . . . . . . . . . . . .L3–L5
Fiber Optic . . . . . . . . . . . . . . . . . . . . . . . . . .L6, L7
Wallplates and Housings
QuickPort . . . . . . . . . . . . . . . . . . . . . . . . . .L8–L16
Acenti® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .L17
Standard Telephone/Video Jacks . . . . . . . .L18–L22
Workstation Accessories . . . . . . . . . . . . . . . . . .L23
Copper Components
Patch Panels . . . . . . . . . . . . . . . . . . . . . .L24–L30
Industrial Connectivity . . . . . . . . . . . . . . . . . . .L31
Patch Cords . . . . . . . . . . . . . . . . . . . . . . . . . . .L32
110-Style . . . . . . . . . . . . . . . . . . . . . . . . .L33–L38
66-Block . . . . . . . . . . . . . . . . . . . . . . . . .L39–L40
Fiber Components
Enclosures . . . . . . . . . . . . . . . . . . . . . . . .L41–L45
Fiber Optic Cable Assemblies . . . . . . . . . . . . . .L46
Accessories . . . . . . . . . . . . . . . . . . . . . . .L47–L49
Enclosures
Telecommunications . . . . . . . . . . . . . . . .L50, L51
Wireless Access Point . . . . . . . . . . . . . . . . . . .L52
Cable Management and Rack Accessories
Versi-Duct® . . . . . . . . . . . . . . . . . . . . . . . . . . .L53
Rack and Frame . . . . . . . . . . . . . . . . . . .L54–L57
Hook and Loop . . . . . . . . . . . . . . . . . . . . . . . .L58
Labeling Products . . . . . . . . . . . . . . . . . . .L59, L60
Tools and Accessories
Punchdown/Termination . . . . . . . . . . . . . . . . .L61
Fiber . . . . . . . . . . . . . . . . . . . . . . . . . . . .L62–L64
Tone Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . .L65
Crimping/Stripping . . . . . . . . . . . . . . . . . . . . . .L65
Craftsperson’s Handset . . . . . . . . . . . . . . . . . .L66
Modular Plug Breakout Adapter . . . . . . . . . . . .L66
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
STRUCTURED CABLING DEVICE FEATURES
Quick Reference Guide
The following terms are used throughout this section to help users quickly identify special product features.
eXtreme® 10G
110 ChannelMax®
Our Category 6A solution enables advanced technologies, including
new 10G and IP-based services. eXtreme 10G connectors feature
patent-pending Cone of Silence and patented Retention Force
Technology® (RFT) for unparalleled signal integrity.
110 channel duct allows extra space for routing cables by increasing
the vertical channel depth to 3 or 5 inches.
Multimedia Structured Cabling Device Features
eXtreme® 6+
Leviton’s Category 6 solution with patented Retention Force
Technology. Includes connectors, patch cords and a variety of patch
panels. Exceeds TIA specifications for channel, permanent link and
component-rated Category 6 systems.
Retention Force Technology ®
Patented features included in eXtreme 6+ and Gigamax 5e+
products, which provide enhanced connection integrity and promote
consistent performance over the life of the system. Increased wire
retention reduces tine contact failure. Improved gas-tight connection
prevents corrosion.
QuickPort®
GigaMax® 5e
Leviton’s Category 5e channel and component rated solution.
Includes connectors, patch cords and a variety of universal and
pre-configured panels. Exceeds TIA specifications for channel-and
component-rated Category 5e systems.
Leviton’s extensive line of snap-in modules allows complete fieldconfigurability for the installer. Leviton QuickPort housings, such as
wallplates, MOS housings and modular furniture faceplates, can be
configured with a custom combination of QuickPort modules which
easily snap in or out of ports.
Category 5
Decora®
Leviton’s Category 5 solution for fast reliable voice and data
applications from frame to workstation. Includes connectors, patch
cords and universal panels. Exceeds TIA specifications for channel
and category-rated Category 5 systems.
The original Decora QuickPort module wallplate is designed to match
Decora electrical devices manufactured by Leviton.
Opt-X®
Opt-X is Leviton’s full solution Fiber Optic System incorporating a
wide range of fiber optic components, including adapters, mounting
plates, connectors, enclosures, cable assemblies, tools,
consumables and workstation products with features and options to
meet all types of customer and application needs.
FastCAM™
Leviton’s FastCAM fiber connectors are pre-terminated and factory
polished to provide precision termination of single-mode or
multimode fiber.
Thread-Lock®
Award-winning Thread-Lock mechanical connectors are part of
Leviton’s full line of connectors. Ideal for quick installations, the
reusable connectors make field-installation simple and cost-effective.
Fast-Cure
Reliable, cost-effective fiber optic connectors with quick, adhesive
termination featuring precision pre-radiused zirconia ferrules,
high retention strength , and patented non-optical disconnect
spacer design.
Versa-Cleave®
The Versa-Cleave tool is your award-winning solution for cleaving
fiber perfectly every time.
Versi-Duct®
Leviton's versatile horizontal and vertical slotted duct system for fiber
and copper cable organization and management. A high-quality
system with a variety of solution-based accessories.
LabelWare™
A TIA/EIA-606-A compliant tool to label and help identify your
cabling infrastructure.
Lifetime Performance Warranty
Leviton Voice & Data Division offers a Lifetime Performance Warranty
when approved components are installed by a Leviton Certified
Installer through the Certified Cabling System (CCS) program.
TIA Guidelines
The TIA, or Telecommunications Industries Association, is the
industry regulatory body which defines industry standards, such as
the following:
TIA/EIA-568-B:
Commercial Building Telecommunications
Cabling Standard
TIA/EIA-569-B:
Commercial Building Standards for
Telecommunications Pathways & Spaces
TIA/EIA-570-B:
Residential and Light Commercial Wiring
Standard
TIA/EIA-606-A:
Administration Standard for the
Telecommunications Infrastructure of
Commercial Buildings
TIA/EIA-607:
Telecommunications Bonding and Grounding
Standard
Styles, Features, etc.
These color bars are found throughout this catalog to indicate
additional information about a given product. They point out unique
features and configurations, or other technical notes to help you in
understanding, choosing or using Leviton products.
STYLES
FEATURES
TESTING AND CODE COMPLIANCE
*COLOR
MATERIAL CHARACTERISTICS
L
more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
2Courtesy of Steven Engineering,To learn
Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
QUICKPORT COPPER CONNECTORS
A
D
E
I
J
B
G
L
K
H
F
C
Color Choices
QuickPort Connectors for UTP and STP Copper Cable
Quickport Snap-In Connectors
eXtreme®
10G Snap-In Connectors cULus
ƒ
N11173
DESCRIPTION
[A] eXtreme 10G channel-rated connector
Cone of Silence™ replacement pack (bag of 13)
eXtreme® 6+ Connectors cULus
N11173
GigaMax® 5e Connectors cULus
Category 5 Connectors U R
6S180-SH6
CAT. NO.
5G110-R*5
5G110-B*5
5G108-R*5
5G108-B*5
5S180-SH5
CAT. NO.
41108-R*5
Category 3 Connectors U R 3
DESCRIPTION
[K] 8-conductor connector
CAT. NO.
41108-R*3
Voice Grade Connectors U R
DESCRIPTION
[L] 6-conductor USOC connector
8-conductor USOC connector
Black(E)
Orange(O)
Blue(L)
Crimson
Red(C)
Yellow(Y)
Green(V)
Purple(P)
Almond(A) Lt Almond(T)
Brown(B)
Dk Red(R)
Note: Protect your Category 5e and 6
connectors from damage and debris with
Leviton’s field installable Shutters and
Icons. See Labeling Products Page L60.
*COLOR/CONNECTORS
For color selection, add suffix to catalog
number as follows: Ivory (I), White (W),
Gray (G), Black (E), Orange (O), Blue (L),
Crimson Red (C), Yellow (Y), Green (V),
Purple (P), Almond (A), Light Almond (T),
Brown (B), Dark Red (R).
MATERIAL CHARACTERISTICS
N11173
DESCRIPTION
[J] 8-conductor Category 5 connector
Gray(G)
CAT. NO.
61110-R*6
61110-B*6
N11173
DESCRIPTION
[E] 8-conductor GigaMax 5e+ component-rated connector
[F] 8-conductor GigaMax 5e+ component-rated connectors
QuickPack™ (25 per pack)
[G] 8-conductor GigaMax 5e channel-rated connector
[H] 8-conductor GigaMax 5e channel-rated connectors
QuickPack™ (25 per pack)
[I] GigaMax 5e shielded channel-rated connector
White(W)
CAT. NO.
6110G-R*6
61C05-B13
ƒ
DESCRIPTION
[B] 8-conductor eXtreme 6+ component-rated connector
[C] 8-conductor eXtreme 6+ component-rated connectors
QuickPack™ (25 per pack)
[D] eXtreme 6+ shielded channel-rated connector
Ivory(I)
Connectors
A–I Leviton offers a variety of copper connectors from advanced CAT 6A (10G) to CAT 3 solutions. CAT 6A eXtreme® 10G, our highest performing connector featuring the Cone of
Silence and Retention Force Technology®, (RFT), resists alien crosstalk (AXT) and offers
unparalleled signal integrity. eXtreme 6+ and component rated GigaMAx 5e+ connectors
also feature patented RFT for long term performance.
Shielded connectors in CAT 5e and CAT 6 ratings feature a robust, die-cast housing, provide
protection from electromagnetic interference, and
Use a Leviton Fieldoffer increased data security. Category 5 and
Termination Coaster to
Category 3 connectors offer an economical solution
quickly and easily punch
down wires on any Leviton
for a variety of applications.
Category or Multimedia
Connector.
All connectors feature standard QuickPort compatiFor more information,
bility and universal color coded wiring labels and
call Sales Support at
exceed industry performance standards. Available
1-800-922-6229.
in 14 colors.
CAT. NO.
41106-R*6
41108-R*8
• All module bodies are fire-retardant
plastic rated UL 94V-0
• Jack spring contacts are the highest
quality phosphor bronze, plated with
50 microinches of gold over 100
microinches of nickel for lowest contact
resistance, maximum life
TESTING AND CODE COMPLIANCE
• All category-rated connectors comply
with TIA-568-A requirements
• UL Listed
• Fully compliant with NEC Article 800
• Meet FCC Part 68
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
L
3
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
QUICKPORT for AUDIO/VIDEO
QuickPort Adapters & Connectors for Audio/Video
A
B
D
Connectors
C
F
Mix & match QuickPort Snap-In Audio/Video Adapters and Connectors to create a customized
multimedia center. Make connections with standard industry tools. For Compression
Connectors, use Leviton’s Master Compression Tool.
A BNC QuickPort Adapter: Gold-plated female-to-female connector with twist-on front and
rear connections using BNC plugs. Applications: high-end video, home theater, CCTV,
LAN. Cable: shielded video & data cable.
B F-Type QuickPort Adapter: Nickel or gold-plated female-to-female connector with screw-on
front and rear connections. Applications: TV, VCR, DVD, satellite, home theater.
Cable: coaxial cable terminated with “F” plugs.
C S-Video QuickPort Connector: Flush-mount S-Video connector on the front with 110
puchdowns on the rear. Applications: audio/video, conference rooms, classrooms,
computers, projectors. Cable: UTP Category 5, 5e or 6 cable.
D QuickPort Blank Inserts: Cover up unused QuickPort housing openings. Order in
packages of 10.
E RCA QuickPort Adapters: Black, yellow or red striped color-coded module for front
and rear connections using RCA plugs. Applications: audio/video, home theatre.
Cable: shielded audio/video cable with terminated RCA plugs.
F
RCA-110 QuickPort Connector: Standard RCA connector on the front with 110
punchdowns on the rear. Applications: audio/video, VCR, DVD, computers and gaming
consoles. Cable: UTP Category 5, 5e or 6 cable.
G, H F-Type and RCA QuickPort Compression Connectors: Time saving solution for robust
terminations right at the wall plate. Applications: HDTV, cameras, component video,
CATV and satellite signal delivery. Cable: RG6 Quad.
I, J RCA and F-Type Compression Connectors: Female style connectors feature radial crimp for
increased audio/video signal integrity. Applications: HDTV, cameras, component video,
CATV and satellite signal delivery. Cable: RG6 Quad.
All modules meet or exceed industry standards. All QuickPort connectors and modules are
UL certified, fully compliant with NEC® Article 800, and meet FCC Part 68.
For product specifications and recommendations, please visit our web resource at
www.leviton.com/.
Quickport Modules
Audio/Video Adapters U ƒ
DESCRIPTION
E
G
H
I–J
*COLOR/CONNECTORS
For color selection, add suffix to catalog
number as follows: [F] RCA-110
Connector Inner Barrel Color—Orange
(O), Red (R), White (W), Yellow (Y).
[G–H] Insert Color—Red (R), Black (E),
Yellow (Y), Blue (L), Green (V).
MATERIAL CHARACTERISTICS
• All module bodies are fire-retardant
plastic rated UL 94V-0
CAT. NO.
IVORY
[A] BNC Adapter, nickel-plated† 41084-BIF
BNC Adapter, gold-plated
40832-0BI
[B] F-type Adapter, nickel-plated† 41084-FIF
F-type Adapter, gold-plated
40831-0BI
[C] S-Video Connector,
40734-SVI
110 termination†
[D] Blank Insert (pack of 10)†
41084-BIB
[E] RCA Jack, gold-plated
40830-BIE
w/black stripe†
RCA Jack, gold-plated
40830-BIR
w/red stripe†
RCA Jack, gold-plated
40830-BIY
w/yellow stripe†
RCA Jack, gold-plated
40830-BIV
w/green stripe†
RCA Jack, gold-plated
40830-BIL
w/blue stripe†
[F] RCA-110 Connector†
40735-R*I
CAT. NO.
WHITE
41084-BWF
40832-0BW
41084-FWF
40831-0BW
40734-SVW
CAT. NO.
ALMOND
41084-BAF
40832-0BA
41084-FAF
40831-0BA
40734-SVA
CAT. NO.
BLACK
41084-BEF
—
41084-FEF
—
40734-SVE
CAT. NO.
GRAY
41084-BGF
—
41084-FGF
—
40734-SVG
41084-BWB
40830-BWE
41084-BAB
40830-BAE
41084-BEB
—
41084-BGB
—
40830-BWR
40830-BAR
—
—
40830-BWY
40830-BAY
—
—
40830-BWV
—
—
—
40830-BWL
—
—
—
40735-R*W
40735-R*A
40735-R*E
40735-R*G
Part numbers shown are for individual polybag packages in standard cartons. Some carded and contractor packs also
available. Call customer service at 1-800-722-2082.
† Note: Also available in Light Almond (*T*)
Compression Connectors and Adapters
DESCRIPTION
[G-H] QuickPort Compression
Connectors
[I-J] Compression Connectors
CAT. NO.
F-STYLE
40782-CPF
CAT. NO.
RCA
40782-R*W
40985-CPF
40985-CRU
Note: See Tools & Accessories Page L59 for Master Compression Tool.
L
more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
4Courtesy of Steven Engineering,To learn
Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
QUICKPORT SNAP-IN ADAPTERS and CONNECTORS for AUDIO
QuickPort Snap-In Adapters & Connectors for Audio
A, B Banana Jack Adapters: One black striped or one red striped color-coded module per unit
pack. Screw-on rear-side connections. Front-side connections use standard banana plugs.
Applications: speaker connections. Cable: speaker wire terminated with banana plugs.
C, D Binding Post Adapters: One black striped or one red striped color-coded module per unit
pack. Screw-on rear-side connections. Optional front-side connections—either screw-on
or push-in—for banana plugs, speaker tip, spade tip, or bare wire. Applications: audio
speaker connections. Cable: speaker wire.
All modules meet or exceed industry standards. All QuickPort connectors and modules are
UL certified, fully compliant with NEC® Article 800, and meet FCC Part 68.
B
A
QuickPort Snap-In Modules
Audio Adapters U ƒ
DESCRIPTION
[A] Banana Jack Adapter,
gold-plated w/black stripe
[B] Banana Jack Adapter,
gold-plated w/red stripe
[C] Binding Post Adapter
gold-plated w/black stripe
[D] Binding Post Adapter
gold-plated w/red stripe
CAT. NO.
IVORY
40837-BIE
CAT. NO.
WHITE
40837-BWE
CAT. NO.
ALMOND
40837-BAE
CAT. NO.
LIGHT ALMOND
40837-BTE
40837-BIR
40837-BWR
40837-BAR
40837-BTR
40833-BIE
40833-BWE
40833-BAE
40833-BTE
40833-BIR
40833-BWR
40833-BAR
40833-BTR
D
C
F
Part numbers shown are for individual polybag packages in standard cartons. Some carded and contractor packs also
available. Call customer service at 1-800-722-2082.
E
E, F Push-On F-Connectors: Quick, cost-effective 75 Ohm coaxial cable terminations, require
no crimping tools. Quick and Universal versions accommodate RG-59, RG-6, and RG-6
Quad coax diameters.
G–K 1-Piece and 2-Piece Crimp-On F-Connectors: Terminates 75 Ohm coaxial cable with a
crimp-on male F-Connector. 2-piece version with separate crimp ring, or one-piece
version with crimp ring attached. Both RG-59 and RG-6 versions available.
Crimping tool required.
L, M Twist-On F-Connectors: Twist-on male F-Connector for 75 Ohm coaxial cable. No
crimping required. RG-59 and RG-6 versions.
G
J
Push-On, Crimp-On and Twist-On Connectors
DESCRIPTION
[E] Universal F-Connector (bag of 100 with installation tool)
[F] Quick F-Connector (bag of 20 with installation tool)
[G] One-piece Crimp-on for RG-6 quad shield (bag of 100)
[H] One-piece Crimp-on for RG-59 (bag of 100)
[I] One-piece Crimp-on for RG-6 (bag of 100)
[J] Two-piece Crimp-on for RG-59 (bag of 100)
[K] Two-piece Crimp-on for RG-6 (bag of 100)
[L] Twist-On Connector for RG-59 (bag of 100)
[M] Twist-On Connector for RG-6 (bag of 100)
I
H
Connectors
Push-On, Twist-On & Crimp-On F Connectors
CAT. NO.
40985-HPC
40985-HPM
40985-0Q6
40985-1P9
40985-1P6
40985-2P9
40985-2P6
40985-TW9
40985-TW6
K
M
Note: See Tools & Accessories Section Page L63 for Crimping Tool.
L
HDMI and DVI Connectors
DESCRIPTION
CAT. NO.
WHITE
CAT. NO.
IVORY
3.5mm Stereo Connector
[N] HDMI Feed Through-Decora Style
[O] DVI Feed Through
40839-SWS
41647-00W
41648-00W
40839-SIS
41647-00I
41648-00I
O
MATERIAL CHARACTERISTICS
N
• All module bodies are fire-retardant
plastic rated UL 94V-0
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
5
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
FIBER OPTIC CONNECTORS
FastCAM™ Factory Polished Fiber Connectors
Pre-terminated and factory polished to provide precision termination of single-mode and
multimode fiber. Available in LC, ST and SC styles to fit 250µm and 900µm cables with
standard single-mode and standard multimode or laser-optimized multimode fiber options
FastCAM Fiber Connectors
A
B
C
D
E
F
G
H
DESCRIPTION
[A] FastCAM ST Multimode 62.5µm Connector
[B] FastCAM ST Multimode 50µm Connector
[C] FastCAM ST Single-mode Connector
FastCAM Laser Optimized ST Multimode Connector
[D] FastCAM SC Multimode 62.5µm Connector
[E] FastCAM SC Multimode 50µm Connector
[F] FastCAM SC Single-mode Connector
FastCAM Laser Optimized SC Multimode Connector
[G] FastCAM LC Multimode 62.5µm Connector
[H] FastCAM LC Multimode 50µm Connector
[I] FastCAM LC Single-mode Connector
[J] FastCAM Laser Optimized LC Multimode Connector
CAT. NO.
49991-MST
49991-5ST
49991-SST
49991-LST
49991-MSC
49991-5SC
49991-SSC
49991-LSC
49991-MLC
49991-5LC
49991-SLC
49991-LLC
Thread-Lock® Reusable Fiber Connectors, Multimode And Single-mode
I
K-M Award-winning Thread-Lock Connectors, available in SC, FC and ST® styles, are
reusable, field-terminable fiber optic connectors with a simple, craft-friendly installation.
Available in 62.5/125 and 50/125 multimode or single-mode versions. Each box of 50
connectors includes one tightening tool.
J
Connectors
Thread-Lock Fiber Connectors
DESCRIPTION
[K] SC Thread-Lock Connector
[L] FC Thread-Lock Connector
[M] ST Thread-Lock Connector
CAT. NO.
SINGLEMODE
49884-SSC (blue)
49883-SFC
49882-SST
CAT. NO.
MULTIMODE
49884-MSC (beige)
49883-MFC
49882-MST
Thread-Lock Accessories
DESCRIPTION
[N] SC Duplex Clip for Thread-Lock Connector,
black (bag of 25)
[O] Silicon Build-up Sleeve Kit, includes one of
each type (bag of 10)
Nylon Retention Sleeve (bag of 10)
K
CAT. NO.
49884-DPC
49885-SBS
49855-SLV
MT-RJ Fiber Connectors, Multimode
M
L
P, Q Leviton MT-RJ Workstation connectors offer innovative push-button fiber termination, and
plug directly into our MOS adapters (see page L14). Frame-Station connectors use a cam
technology to lock the fiber into a terminated position for use in frame or, with adapters, in
the workstation. Both feature a pre-polished ribbon fiber ferrule that eliminates polishing.
MT-RJ Fiber Connectors
O
N
DESCRIPTION
[P] High-Density MT-RJ Frame-Station Connector,
multimode, 62.5 µm
High-Density MT-RJ Frame-Station Connector,
multimode, 50.0 µm
[Q] High-Density MT-RJ Workstation Connector,
multimode, 62.5 µm
High-Density MT-RJ Workstation Connector,
multimode, 50.0 µm
CAT. NO.
49888-6SF
49888-5SF
49888-6SW
49888-5SW
Note: For a complete listing of Fiber Optic Tools, see the Tools section, Pages L62–L64.
Q
P
L
more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
6Courtesy of Steven Engineering,To learn
Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
FIBER OPTIC ADAPTERS and CONNECTORS
Fast Cure Adhesive Connectors
A-D Leviton Fast-Cure adhesive connectors, available in ST, SC, FC, and LC styles, are
reliable, cost-effective fiber optic connectors with quick, adhesive termination. Feature
precision pre-radiused zirconia ferrules, high cable retention crimp, and patented
non-optical disconnect spacer design. Available in multimode or singlemode versions.
Adhesive Connectors
DESCRIPTION
[A]
[B]
[C]
[D]
ST Fast Cure Connector
SC Fast Cure Connector
FC Fast Cure Connector
LC Fast Cure Connector with 3mm boot
LC Fast Cure Connector with .9mm boot
CAT. NO.
SINGLE-MODE
49990-SST
49990-SSC
49990-SFC
49990-SL2
49990-SDL
CAT. NO.
MULTIMODE
49990-MST
49990-MSC
49990-MFC
49990-ML2
49990-MDL
CAT. NO.
SINGLE-MODE
CAT. NO.
MULTIMODE
49886-DSC
Fast Cure Accessories
DESCRIPTION
[E]
SC Duplex Clip for Fast Cure Connector,
black (bag of 25)
[F] LC Duplex Clip for Fast Cure Connector,
blue (bag of 25)
[G] LC Duplex Clip for Fast Cure Connector,
beige (bag of 25)
A
B
C
D
49886-DLS
E
49886-DLM
G
F
QuickPort® Snap-In Fiber Adapters
Fiber Adapters
DESCRIPTION
[H] QuickPort MT-RJ Adapter, for Frame-Station Connector
[I] QuickPort ST Fiber Optic Adapter, SM/MM,
Phos. Bronze Sleeve†
QuickPort ST Fiber Optic Adapter, SM/MM,
Zirconia Sleeve
[J] QuickPort Simplex FC Fiber Optic Adapter, SM/MM,
Phos. Bronze Sleeve
QuickPort Simplex FC Fiber Optic Adapter, SM/MM,
Zirconia Sleeve
[K] QuickPort Multimode Simplex SC Adapter Module,
Phos Bronze
QuickPort Singlemode Simplex SC Adapter Module,
Zirconia Ceramic
[L] QuickPort Duplex LC Adapter, SM/MM,
Phos. Bronze Sleeve
QuickPort Duplex LC Adapter, SM/MM,
Zirconia Ceramic Sleeve
CAT. NO.
49889-QF*
41084-S*F
H
I
J
K
41084-S*Z
41084-F*P
Connectors
H–L Leviton offers QuickPort adapters to bring Thread-Lock and Fast-Cure fiber to any
QuickPort wallplate or housing. FC, SC, ST, LC and MT-RJ adapters, in various colors.
41084-F*Z
41085-M*C
41085-S*C
41085-ML*
41085-SL*
[H] Use with MOS 1 Port Adapter 41291-1M* Page L15
† Note: Cat. No. 41084 also available in Light Almond (-STF)
L
*COLOR/FIBER ADAPTERS
[H–M] For color selection, add suffix to
catalog number as follows: Ivory (I),
White (W), Gray (G), Black (E).
Leviton QuickPort fiber adapters fit into
any Leviton QuickPort wallplate or
housing, providing a high-density fiberto-the-workstation solution, see pages
L8–L17 for workstation options.
Leviton’s Fiber Optic Consumables Kits
provide the products you need to
quickly and efficiently polish, clean
and terminate all our fiber connectors.
See Page L63.
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
7
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
QUICKPORT FLUSH MOUNT WALLPLATES and INSERTS
QuickPort Flush Mount Wallplates and Inserts
Wallplates and Housings
Leviton offers one of the largest selections of field-configurable, flush mount wallplates and inserts available on
today’s market. They provide the adaptability and performance required in a voice/data wiring interface in a sleek
low-profile wallplate.
Choose from a full range of materials and styles, including: nylon, urea and stainless steel; standard and midsize;
single- and dual-gang; and Decora® designer styling. All Leviton flush mount devices fit standard NEMA openings
for easy installation on new or existing wallboxes.
Styles
QuickPort
Midsize
Wallplates with standard-sized openings designed to
accommodate QuickPort connectors or adapters.
A wider (3.12" W x 4.87" H) single-gang wallplate
designed to disguise flaws in drywall or provide a
designer silhouette.
Flush Mount
Wallplates designed to fit smoothly against a wall,
with a minimum profile.
Decora®
Wallplates with standard-sized openings designed to
accommodate Decora Inserts.
Type 106 (Duplex)
The Standard NEMA-style form, with two openings,
which is most common among electrical outlets.
Type 105 (Single)
The Standard NEMA-style form with one opening—
less common than the Type 106.
Decora Insert
Type 104 (Duplex)
Standard, Decora-sized inserts designed
to adapt high and low voltage applications
to a single wallplate profile.
A NEMA-style of surface-mount box, with two outlets
or openings, common for use with telephone jacks
on walls or along baseboards.
Single-gang
Type 103 (Single)
The standard wallplate width of
2.75" W x 4.53" H.
Identical to the type 104 box, but featuring only
one outlet.
Dual-Gang
Acenti™ Insert
The standard double wallplate width of
4.625" W x 4.53" H.
QuickPort inserts designed to snap into Acenti
wallplates.
Wall Jack
Acenti Wallplate
A wallplate preconfigured with some kind of
connector or adapter.
Sleek, low-profile plates available in 1–6 gang styles
accept a variety of QuickPort and other inserts for
voice, data, electro-mechanical, lighting control,
GFCI and more.
L
more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
8Courtesy of Steven Engineering,To learn
Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
®
QUICKPORT DECORA MULTIMEDIA INSERTS
Combine voice, data, audio and video in one compact, attractive Decora wallplate. QuickPort
Decora Wallplate Inserts offer designer style to match Leviton Decora electrical switches and
outlets, with the capacity and flexibility to support high-tech communications for boardrooms or
workstations. QuickPort snap-in modules fit neatly into a single gang Decora wallplate and can
be combined with Decora electrical devices (with a barrier box) in a multi-gang wallplate. Simply
snap in the QuickPort connectors of your choice to customize multimedia options. Compatible
with all standard Decora wallplates and Decora Plus snap-on wallplates with hidden mounting
screws and standard NEMA openings. UL Listed and CSA Certified.
QuickPort Decora Multimedia Inserts
DESCRIPTION
2-Port Insert†
3-Port Insert†
4-Port Insert†
6-Port Insert†
Blank Insert†
CAT. NO.
IVORY
41642-00I
41643-00I
41644-00I
41646-00I
80414-00I
CAT. NO.
WHITE
41642-00W
41643-00W
41644-00W
41646-00W
80414-00W
CAT. NO.
GRAY
41642-0GY
41643-0GY
41644-0GY
41646-0GY
80414-0GY
CAT. NO.
BLACK
41642-00E
41643-00E
41644-00E
41646-00E
80414-00E
CAT. NO.
ALMOND
41642-00A
41643-00A
41644-00A
41646-00A
80414-00A
CAT. NO.
IVORY
41666-00I
41688-00I
CAT. NO.
WHITE
41666-00W
41688-00W
For Decora-style F-connector and
Telephone Wall Jack Inserts,
see page L19.
CAT. NO.
BROWN
41642-00B
41643-00B
41644-00B
41646-00B
QuickPort 2-Port Insert/Connector Kits
DESCRIPTION
2-Port Insert w/two 6-conductor connectors
2-Port Insert w/two 8-conductor connectors†
Wallplates and Housings
QuickPort Decora Multimedia Inserts
Decora Plus Voice/Data Connectors with QuickPort Snap-In Modules
DESCRIPTION
Insert with one 6-conductor jack and one F-connector
Insert with one 6-conductor jack and one 8-conductor jack
CAT. NO.
IVORY
41658-00I
41668-00I
CAT. NO.
WHITE
41658-00W
41668-00W
Note: Order QuickPort Snap-In Modules on pages L3–L7. Configured versions also meet FCC Part 68.
† Note: Also available in Light Almond (00T)
Decora Wallplates
DESCRIPTION
Single-Gang Decora Wallplate
Dual-Gang Decora Wallplate
Three-Gang Decora Wallplate
Four-Gang Decora Wallplate
CAT. NO.
UREA
80401-00*
80409-00*
80411-00*
80412-00*
CAT. NO.
NYLON
80401-0N*
80409-0N*
80411-0N*
80412-0N*
Note: Additional Decora Wallplate ordering information can be found on page L9.
CAT. NO.
DECORA PLUS SNAP-ON
80301-0S*
80309-0S*
80311-0S*
80312-0S*
*COLOR/WALLPLATES
For color selection, add suffix to catalog
number as follows:1- and 2-Gang–
Ivory (I), White (W), Gray (G), Black (E),
Almond (A), Light Almond (T) and Brown
(no additional suffix indicates Brown).
3-Gang–Ivory (I), White (W), Black (E),
Almond (A) and Light Almond (T).
4-Gang–Ivory (I), White (W), Almond (A)
and Light Almond (T).
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
9
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
QUICKPORT SINGLE- and DUAL-GANG WALLPLATES
A
QuickPort Single- and Dual-Gang Wallplates
QUICKPORT SINGLE-GANG MULTI-PORT WALLPLATES WITH OR WITHOUT DESIGNATION WINDOWS
A, B Single-gang flush mount wallplates offer field-configurable flexibility in an attractive
single-piece housing. Fully compatible with all QuickPort Snap-in Modules including
connectors or blank fillers. Options for port identification include LabelWare® wallplate
and housing labels, typed or handwritten labels for designation windows, or the use of
different color QuickPort modules. All windows are field-label compatible, and cover the
wallplate security screw. UL Listed, CSA Certified, NEC Article 800 compliant.
B
QuickPort Single-Gang Inserts
DESCRIPTION
6-Port Wallplate*
4-Port Wallplate*
3-Port Wallplate*
2-Port Wallplate*
1-Port Wallplate*
CAT. NO.
IVORY
41080-6IP
41080-4IP
41080-3IP
41080-2IP
41080-1IP
CAT. NO.
WHITE
41080-6WP
41080-4WP
41080-3WP
41080-2WP
41080-1WP
CAT. NO.
GRAY
41080-6GP
41080-4GP
41080-3GP
41080-2GP
41080-1GP
CAT. NO.
BLACK
41080-6EP
41080-4EP
41080-3EP
41080-2EP
41080-1EP
CAT. NO.
ALMOND
41080-6AP
41080-4AP
41080-3AP
41080-2AP
41080-1AP
CAT. NO.
BROWN
41080-6BP
41080-4BP
41080-3BP
41080-2BP
41080-1BP
† Note: Cat. No. 41080 also available in Light Almond (41080-*TP)
C
QuickPort Single-Gang Wallplates with Designation ID Windows
Wallplates and Housings
DESCRIPTION
6-Port Wallplate
4-Port Wallplate
3-Port Wallplate
2-Port Wallplate
1-Port Wallplate
NO. OF
WINDOWS
2
2
2
2
1
CAT. NO.
IVORY
42080-6IS
42080-4IS
42080-3IS
42080-2IS
42080-1IS
CAT. NO.
WHITE
42080-6WS
42080-4WS
42080-3WS
42080-2WS
42080-1WS
CAT. NO.
GRAY
42080-6GS
42080-4GS
42080-3GS
42080-2GS
42080-1GS
CAT. NO.
BLACK
42080-6ES
42080-4ES
42080-3ES
42080-2ES
42080-1ES
Note: Housings are sold empty. Snap-in Connectors must be ordered separately. (See pages L3–L7.)
QUICKPORT DUAL-GANG MULTI-PORT WALLPLATES WITH DESIGNATION WINDOWS
C Dual-gang flush mount wallplates with designation windows are designed in a single-piece
housing and a wide choice of port counts for maximum density. Field configure with any
combination of QuickPort Snap-in Modules. Use different color QuickPort modules for port
identification, or type or hand-write labels for designation windows. All windows are fieldlabel compatible, and cover the wallplate security screw. QuickPort wallplates are UL
Listed, CSA Certified, and listed in compliance with NEC Article 800.
Leviton’s LabelWare® System is
TIA/EIA-606-A compliant and designed
to help you label all our copper and
fiber products. User-friendly software
makes it quick, easy, and completely
configurable or use pre-printed labels.
See pages L59-L60.
QuickPort Dual-Gang Wallplates with Designation ID Windows
DESCRIPTION
12-Port Wallplate
8-Port Wallplate
6-Port Wallplate
4-Port Wallplate
3-Port Wallplate
2-Port Wallplate
1-Port Wallplate
NO. OF
WINDOWS
4
4
4
4
2
2
2
CAT. NO.
IVORY
42080-12I
42080-8IP
42080-6IP
42080-4IP
42080-3IP
42080-2IP
42080-1IP
CAT. NO.
WHITE
42080-12W
42080-8WP
42080-6WP
42080-4WP
42080-3WP
42080-2WP
42080-1WP
CAT. NO.
GRAY
42080-12G
42080-8GP
42080-6GP
42080-4GP
42080-3GP
42080-2GP
42080-1GP
CAT. NO.
BLACK
42080-12E
42080-8EP
42080-6EP
42080-4EP
42080-3EP
42080-2EP
42080-1EP
Note: Housings are sold empty. Snap-in Connectors must be ordered separately. (See pages L3–L7.)
QUICKPORT MIDWAY WALLPLATES
D Midway wallplates provide QuickPort modularity with .375" more coverage than standard
wallplates. Expanded silhouette provides designer look and easily hides irregular drywall cuts
or flaws around outlets. The 4.875" x 3.125" plate is .375" wider and taller, and matches
Leviton’s Midway Wallplates for electrical devices and lighting controls, .25" depth ensures a
clean fit with various devices. Crafted from durable, smooth-finish nylon, wallplates fit a
single-gang electrical box. UL listed and CSA certified.
QuickPort Midway Single-Gang Wallplates, Nylon
DESCRIPTION
6-Port Midway QuickPort Wallplate
4-Port Midway QuickPort Wallplate
3-Port Midway QuickPort Wallplate
2-Port Midway QuickPort Wallplate
1-Port Midway QuickPort Wallplate
CAT. NO.
IVORY
41091-6IN
41091-4IN
41091-3IN
41091-2IN
41091-1IN
CAT. NO.
WHITE
41091-6WN
41091-4WN
41091-3WN
41091-2WN
41091-1WN
CAT. NO.
ALMOND
41091-6AN
41091-4AN
41091-3AN
41091-2AN
41091-1AN
CAT. NO.
BROWN
41091-6BN
41091-4BN
41091-3BN
41091-2BN
41091-1BN
CAT. NO.
LT ALMOND
41091-6TN
41091-4TN
41091-3TN
41091-2TN
41091-1TN
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
10
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
QUICKPORT STAINLESS STEEL WALLPLATES/WALLPLATE INSERTS
QuickPort Stainless Steel Wallplates
A
QUICKPORT STAINLESS STEEL SINGLE-GANG AND DUAL-GANG WALLPLATES
A, B Leviton's single-gang and dual-gang QuickPort Stainless Steel Wallplates provide elegant
designer styling, and accept any QuickPort connector or adapter. Ideal in environments
that demand durable, easy-to-clean solution. Use different color QuickPort modules or the
LabelWare System for port identification. Fit standard NEMA electrical boxes. cULus Listed,
meet FCC Part 68, and are listed in compliance with TIA/EIA-568-B.
QuickPort Stainless Steel Wallplates
DESCRIPTION CAT. NO.
1-PORT
Single-Gang 43080-1S1
Dual-Gang —
CAT. NO.
2-PORT
43080-1S2
43080-2S2
CAT. NO.
3-PORT
43080-1S3
—
CAT. NO.
4-PORT
43080-1S4
43080-2S4
CAT. NO.
6-PORT
43080-1S6
43080-2S6
CAT. NO.
8-PORT
—
43080-2S8
CAT. NO.
12-PORT
—
43080-S12
B
Note: Housings are sold empty. Snap-in Connectors must be ordered separately. (See pages L3–L7.)
QUICKPORT STAINLESS STEEL WALLPHONE WALLPLATES
C Bring Stainless Steel elegance to your wallphone. Easily mount any standard wallphone on
this sturdy, standard-sized wallplate with durable rivets. Single port accepts any Leviton
QuickPort Connector. Recessed design fits cleanly with slide-rail mechanisms.
QuickPort Stainless Steel Wallphone Wallplates
CAT. NO.
4108W-1SP
4108W-0SP
C
Wallplates and Housings
DESCRIPTION
Stainless Steel Wallphone Wallplate, recessed
Stainless Steel Wallphone Wallplate
Note: Leviton also offers Voice-Grade Wall Phone Jacks. (See pages L3–L7.)
QuickPort Wallplate Inserts
QUICKPORT DUPLEX/QUAD 106 INSERTS
D, E The QuickPort Duplex and Quad 106 Units are ideal for applications where two or four
individual modular ports are desired, within the standard ‘106/NEMA-style’ outline that
prevails among electrical outlets. Accepts all QuickPort Snap-in Modules and fits
standard NEMA wallboxes and most floor boxes and monuments. A recess above each
module port on the Duplex 106 Unit accommodates Leviton Designation Labels (page
L60) or hand-written port ID. Uses standard duplex wallplates (sold separately, see
Section E). UL & CSA listed and NEC Article 800 compliant.
D
QuickPort Duplex 106 Insert U R
DESCRIPTION
QuickPort Duplex 106 Insert only
QuickPort Quad 106 Insert only
CAT. NO.
LT. ALMOND
41087-2TP
41087-QTP
CAT. NO.
IVORY
41087-2IP
41087-QIP
CAT. NO.
WHITE
41087-2WP
41087-QWP
CAT. NO.
GRAY
41087-2GP
41087-QGP
CAT. NO.
BLACK
41087-2EP
41087-QEP
Note: Inserts are sold empty. Snap-in Connectors must be ordered separately. (See pages L3–L7.)
E
QUICKPORT FLOOR JACK INSERTS
F Rugged and fully field-configurable, this device provides point-of-use connectivity for a
broad range of applications where convenience or building requirements dictate the use of
a floor-mounted communications outlet. Each floorplate is made of .06" thick solid brass to
hold up under heavy furniture or foot traffic. When not in use, a flush-fitting brass screw
cap keeps internal components free from dirt and dust.
The two individual ports are configured easily with any combination of QuickPort. QuickPort
floor jacks will fit standard metal boxes 3" x 2", 3" x 21⁄8" and larger.
QuickPort Duplex Floor Jack Insert with Brass Plate and Screw Cap
DESCRIPTION
Insert with one F-connector, one blank module, and brass plate w/cap
Insert with one 6-conductor connector, one blank module, and brass plate w/cap
Insert with one blank module and brass plate w/cap
Insert with two 6-conductor jacks and brass plate w/cap
Insert with one 6-conductor connector, one F-connector, and brass plate w/cap
CAT. NO.
41650-00F
41650-006
41652-000
41652-006
41652-06F
F
NOTE: Wallplate included with each
QuickPort Floor Jack Insert.
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
11
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
QUICKPORT MODULAR FURNITURE FACEPLATES
QuickPort Modular Furniture Faceplates
Wallplates and Housings
Steelcase Series
Bring a simple snap-in installation, attractive streamlined appearance and easy identification to your modular furniture environments. QuickPort Modular Furniture Faceplates
accept all QuickPort Snap-In Modules—supporting virtually any application—and snap
easily and snugly into standard modular furniture. Features faceplate windows with
clear plastic covers that allow easy insertion of ID labels. Labor-saving QuickPort jack
design and tool-less plate installation simplifies installations, adds, moves and changes,
and allows access to the connectors without removing the furniture channel cover.
Available in 2- and 4-port versions, and in four colors: ivory, white, gray and black.
cULus Listed and A-Tick Certified.
Herman Miller® series (shown with
49910-SE4 and Herman Miller's
"Reducer" G1189A)
QuickPort furniture
faceplates come in many
styles to fit all major modular
furniture brands.
Haworth® Panels
Standard Modular Furniture Faceplates with ID Windows
DESCRIPTION
CAT. NO.
HERMAN STEELCASE HAWORTH®
MILLER®
49910-S*2
G
G
G
49910-S*4
G
G
G
49910-E*4
G
G
G
HON
OTHERS
2-Port
G
4-Port (w/1 blank)
G
4-Port Extended-depth†
G
(w/1 blank)
Note: Standard modular furniture faceplates above fit openings of approximately 1.38" x 2.63".
G
G
G
†4-port extended plate provides 1/2" added depth (3/4" total) for installation into shallow raceway channels, e.g., some powered channels.
G Compatible when used with Herman Miller G1189A Reducer available from Herman Miller dealers.
Herman Miller Modular Furniture Faceplates
DESCRIPTION
CAT. NO.
HERMAN STEELCASE HAWORTH®
MILLER®
49910-H*2
G
—
—
49910-H*4
G
—
—
2-Port HM Faceplate†
4-Port HM Faceplate
(with 1 Blank)
Note: Herman Miller faceplates above fit openings of approximately 1.88" x 2.98".
HON
OTHERS
—
—
—
—
†Fits most Herman Miller furniture. To ensure compatibility with specific models call Applications Engineering.
*COLOR/FACEPLATES
For color selection, add suffix to catalog
number as follows: Ivory (I), White (W),
Gray (G), Black (E).
MATERIAL CHARACTERISTICS
L
High-impact, fire-retardant, plastic
rated UL 94V-0.
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
12
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
QUICKPORT MULTIMEDIA OUTLET SYSTEM (MOS)
QuickPort Multimedia Outlet System (MOS)
The innovative QuickPort Multimedia Outlet System is designed to provide the highest level of application and installation flexibility for fiber optic and twisted-pair connectivity. It consists of a surface mount box and single- and dualgang wallplates, which accept a variety of copper, fiber, and A/V QuickPort snap-in modules
The MOS line is distinguished from other QuickPort housings by several features: front-load installation capability so
that changes can be made without dismantling the entire device; duplex modules and fiber coupling types for SC, ST,
MT-RJ and other applications; the addition of S-video and RCA adapters for high-definition audio/video; and design
elements for enhanced routing, storage and bend radius protection of fiber and copper cabling. See individual product descriptions for more features.
For product specifications and recommendations, please visit our web resource at www.leviton.com.
Wallplates and Housings
Features and Benefits
A Multiple connector termination stations provide stabilized
punchdown support.
B Leviton’s exclusive dual rings store the fiber loop and
provide multiple straight paths to each port.
C Single latch cover with security option restricts access
if desired.
D Multi-directional mounting and raceway access allow
complete installation flexibility.
E Front-loading inserts simplify configuration, while strong
latches keep them in place during use.
F Fiber storage/spacer ring fits between wallbox/mud ring
and MOS dual-gang plate for fiber loop storage and
management.
G 45˚ angled jack insert optimizes bend radius compliance
of cable exiting QuickPort® snap-in connectors.
H Load up to 12 devices in a dual-gang wallplate.
D®
C®
A®
B®
D®
F®
E®
G®
H®
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
13
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
QUICKPORT MULTIMEDIA OUTLET SYSTEM (MOS)
Styles
QuickPort Multimedia Outlet System (MOS)
Configurations for MOS Wallplates
MOS Surface Mount Boxes and Wallplates
Three–1 Unit High
6-Port Surface Mount Box
41296-MMo
Single-Gang Wallplate
41290-SMo
Dual-Gang Wallplate
41290-DMo
Fiber Storage/Spacer Ring
41290-DR*
MOS Inserts for Surface Mount Boxes and Wallplates
Wallplates and Housings
One–1 Unit High
One– 1/2 Unit High
One–1-1/2 Units High
Two–1-1/2 Units High
One–1 Unit High
One–1 Units High
One–3 Units High
COLOR/INSERTS and WALLPLATES
For color selection, add suffix to catalog
number as follows:
* Ivory (I), White (W), Gray (G), Black (e)
° Light Almond (T), Ivory (I), White (W),
Gray (G), Black (E)
• Ivory (I), White (W)
MATERIAL CHARACTERISTICS
L
High-impact, fire-retardant, plastic rated
UL 94V-0.
2-Port QuickPort Adapter, flush, (1 unit high)
41291-2Qo
1-Port QuickPort Adapter, flush, (1 unit high)
41291-1Mo
1 S-video Insert Module, (1 unit high)
41291-1Vo
1 RCA Insert Module, 2-port, screw terminal (1 unit high)
(red and white stripe)
1 RCA Insert Module, 3-port, female-to-female adapters (1 unit high)
(yellow and white stripe)
1 HD-15 Insert Module, female-to-female (1 unit high)
1 HD-15 Screw Terminal
1 Duplex ST® Adapter, (1 unit high) (phos. bronze sleeve)
1 Duplex ST® Adapter, (1 unit high) (zirconia ceramic sleeve)
1 Duplex FC Adapter (1 unit high) (phos. bronze sleeve)
1 Duplex FC Adapter (1 unit high) (zirconia ceramic sleeve)
1 Duplex SC Adapter (1 unit high) (phos. bronze sleeve)
1 Duplex SC Adapter (1 unit high) (zirconia ceramic sleeve)
Blank Module (1 unit high)
Blank Module HD-15 Insert Module
1 RCA Component (Y, W, R) 110
1 RCA Component (R, G, B) 110
1 Decora Converter Strap
41291-1Ro
41292-3Ro
41293-HDo
41295-HD•
41291-2T*
41291-ZT*
41291-PF*
41291-ZF*
41291-PC*
41291-2C*
41291-1B*
41291-DBo
41292-AV•
41292-DV•
41649-00•
MOS Inserts for use with MOS Wallplates
2-Port QuickPort Adapter, 45˚ exit (1.5 units high)
41294-2Qo
Blank Module (0.5 unit high)
41295-5Bo
Blank Module (1.5 units high)
41294-2Bo
Blank Module (2 units high)
41292-2Bo
1 Duplex ST® Adapter 45˚ exit, SM/MM (1.5 units high) (phos. bronze sleeve)
1 Duplex ST® Adapter 45˚ exit, SM/MM (1.5 units high) (zirconia ceramic sleeve)
1 Duplex FC Adapter 45˚ exit, SM/MM (1.5 units high) (phos. bronze sleeve)
1 Duplex FC Adapter 45˚ exit, SM/MM (1.5 units high) (zirconia ceramic sleeve)
1 Duplex SC® Adapter 45˚ exit, SM/MM (1.5 units high) (phos. bronze sleeve)
1 Duplex SC® Adapter 45˚ exit, SM/MM (1.5 units high) (zirconia ceramic sleeve)
1 Duplex ST® Adapter 45˚ exit, SM/MM (2 units high) (phos. bronze sleeve)
1 Duplex ST® Adapter 45˚ exit, SM/MM (2 units high) (zirconia ceramic sleeve)
1 Duplex FC Adapter 45˚ exit, SM/MM (2 units high) (phos. bronze sleeve)
1 Duplex FC Adapter 45˚ exit, SM/MM (2 units high) (zirconia ceramic sleeve)
2 Duplex SC® Adapter 45˚ exit, SM/MM (2 units high) (phos. bronze sleeve)
2 Duplex SC® Adapter 45˚ exit, SM/MM (2 units high) (zirconia ceramic sleeve)
2 Duplex ST® Adapter 45˚ exit, SM/MM (3 units high) (phos. bronze sleeve)
2 Duplex ST® Adapter 45˚ exit, SM/MM (3 units high) (zirconia ceramic sleeve)
41294-2T*
41294-ZT*
41294-PF*
41294-ZF*
41294-PC*
41294-2C*
41292-2T*
41292-ZT*
41292-PF*
41292-ZF*
41292-PC*
41292-2C*
41293-4T*
41293-ZT*
2 Duplex FC Adapter 45˚ exit, SM/MM (3 units high) (phos. bronze sleeve)
2 Duplex FC Adapter 45˚ exit, SM/MM (3 units high) (zirconia ceramic sleeve)
41293-PF*
41293-ZF*
2 Duplex SC® Adapter 45˚ exit, SM/MM (3 units high) (phos. bronze sleeve)
2 Duplex SC® Adapter 45˚ exit, SM/MM (3 units high) (zirconia ceramic sleeve)
41293-PC*
41293-4C*
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
14
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
QUICKPORT SURFACE MOUNT HOUSINGS
QuickPort Surface Mount Housings
Leviton’s surface mount housings offer fast, economical installation and field configuration for applications where it
may not be practical to add a wallbox, such as modular furniture environments or retrofit situations. As with all
QuickPort field-configurable products, you configure the housing to your specific needs using Snap-In Modules—
easily rearranged if applications change. These housings can be adapted for mounting on all types of surfaces,
including walls and furniture with tape or screws (both included) modular furniture with a modular furniture bracket
(page L23) or to metal surfaces with magnets (page L23).
Note: Identify all your connections with Leviton LabelWare System wallplate and housing labels (See page L60.)
Designation window accepts handwritten indications, field-printed labeling
systems, Leviton LabelWare™ or preprinted port ID labels (see page L59).
Wallplates and Housings
4-, 6- and 12-port housing feature
raceway knockouts on all non-ported
sides which are compatible with
major raceway brands.
For large installations, silkscreen the
cover with words, numbers, icons or
company logos. Call Applications
Engineering for advice on artwork
and minimum quantity requirements.
In-port connector termination
stations provide stability during
punchdown.
4-, 6- and 12-port surfacemount housings are compatible
with Leviton’s modular furniture
mounting brackets and magnets
(see page L24).
Port identification areas reside
next to numbered ports.
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
15
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
QUICKPORT SURFACE MOUNT HOUSINGS
Wallplates and Housings
B
A
C
D
E
QuickPort 1-, 2-, 4-, 6-, and12-Port Surface Mount Housings
A–E Leviton has a surface mount housing to suit your need. 1-, 2-, 4-, 6- and 12-Port
housings are easily field configured with QuickPort Connectors (sold separately, pages
L3–L7). The 2-port version comes with a blank filler to cover and protect one unused
opening. The 4- and 6-port housings are sized to completely cover a single-gang NEMA
wallbox opening, while the 12-port fits over a single- or dual-gang NEMA box opening.
Housings contain knockouts to accommodate raceway and cable entry, with
built-in strain relief to assure undisturbed connections, and easy cover latches allow easy
adds, moves and changes.
All housings can be mounted with screws or adhesive mounting tape (both provided), or
with magnets or modular furniture brackets (sold separately on page L24). Identify ports
and stations by using ample space next to each port or the designation window. All
housings are UL Listed and compliant with NEC Article 800.
QuickPort Surface Mount Housings
DESCRIPTION
[A] 1-Port Surface Mount Housing
[B] 2-Port Surface Mount Housing (includes 1 blank module)
[C] 4-Port Surface Mount Housing
[D] 6-Port Surface Mount Housing
[E] 12-Port Surface Mount Housing
CAT. NO.
41089-1*P
41089-2*P
41089-4*P
41089-6*P
41089-12*
Note: Connectors must be ordered separately. (See pages L3–L7)
Leviton also offers Pre-configured Voice-Grade Surface Mount Jacks. (See page L23)
*COLOR/INSERTS and WALLPLATES
For color selection, add suffix to catalog
number as follows: Ivory (I), White (W),
Gray (G), Black (E).
MATERIAL CHARACTERISTICS
High-impact, fire-retardant, plastic rated
UL 94V-0.
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
16
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
™
ACENTI WALLPLATES
F
E
A
B
C
D
Acenti Wallplates, QuickPort® Inserts and Connectors
Leviton’s new Acenti wallplates are sleek and smooth and come in 7 soft neutral colors to perfectly
complement any home or office environment. The soft radius design with low-profile corners
adds personality with clean simple lines. Available in 1-, 2-, 3-, 4-, 5- and 6-gang styles.
Choose from a wide variety of inserts for voice, data, electro-mechanical, lighting control, GFCI,
and more. QuickPort inserts give all your voice, data, audio/visual and even fiber connections a
sleek new look. See all the options at Leviton.com/acenti or call Leviton Customer Service at
1(800) 323-8920.
G
DESCRIPTION
[A] 2-Port Acenti QuickPort Insert
[B] 3-Port Acenti QuickPort Insert
[C] 4-Port Acenti QuickPort Insert
[D] 6-Port Acenti QuickPort Insert
CAT. NO.
AC642
AC643
AC644
AC646
H
Acenti Wallplates
DESCRIPTION
[E] Single-Gang Acenti Wallplate
[F] Dual-Gang Acenti Wallplate
Three-Gang Acenti Wallplate
Four-Gang Acenti Wallplate
Five-Gang Acenti Wallplate
Six-Gang Acenti Wallplate
CAT. NO.
ACWP1
ACWP2
ACWP3
ACWP4
ACWP5
ACWP6
J
I
Note: Order QuickPort Snap-In Connectors on page L3–L7. Configured versions also meet FCC Part 68
Acenti® QuickPort® Snap-In Connectors
DESCRIPTION
GigaMax® Cat 5e Channel-Rated Connector
[G] BNC Adapter, Nickel-Plated
BNC Adapter, Gold-Plated
F-Type Adapter, Nickel-Plated
[H] F-Type Adapter, Gold-Plated
[I] S-Video Module, 110 Termination
[J] Blank Insert (Pack of 10)
RCA Jack, Gold-Plated w/Red Stripe
[K] RCA Jack, Gold-Plated w/Black Stripe
RCA Jack, Gold-Plated w/Yellow Stripe
[L] Banana Jack, Gold-Plated w/Red Stripe
Banana Jack, Gold-Plated w/Black Stripe
Binding Post Adapter, Gold-Plated w/Red Stripe
[M] Binding Post Adapter, Gold-Plated w/Black Stripe
RCA 110 Termination Connector, Orange Inner Barrel
RCA 110 Termination Connector, Red Inner Barrel
RCA 110 Termination Connector, White Inner Barrel
RCA 110 Termination Connector, Yellow Inner Barrel
CAT. NO.
AC108-R*5
AC084-B*F
AC832-0B*
AC084-F*F
AC831-0B*
AC734-SV*
AC084-B*B
AC830-B*R
AC830-B*E
AC830-B*Y
AC837-B*R
AC837-B*E
AC833-B*R
AC833-B*E
AC735-RO*
AC735-RR*
AC735-RW*
AC735-RY*
K
Wallplates and Housings
Acenti QuickPort Multimedia Inserts
L
M
*COLOR/ACENTI
For color selection, add suffix to catalog
number as follows: Neutral Colors–
Alabaster (ALA), Onyx (ONX) and Slate
(SLT). Off-White Colors–Quartz (QTZ),
Sand (SND), Driftwood (DFT) and
Natural (NTL).
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
17
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
STANDARD TELEPHONE/VIDEO WALL JACKS
A
Standard Telephone/Video Wall Jacks
TYPE 625B4 MODULAR WALL JACK
Includes jack, plate, and mounting hardware. Fits standard NEMA wallboxes. Screw
terminals. UL Listed and CSA Certified or cULus Listed. Standard 6P4C (item A) 625B4
Modular Wall Jacks feature lead-frame design for reliability and ease of installation.
Type 625B4 Modular Wall Jack—Smooth Finish U R cULus, Standard Plate
DESCRIPTION
[A]
B
6-Position, 4-Conductor
6-Position, 6-Conductor
8-Position, 8-Conductor
CAT. NO.
BROWN
40249-000†
—
—
CAT. NO.
IVORY
40249-00I†
40238-00I
40280-00I
CAT. NO.
WHITE
40249-00W†
40238-00W
40280-00W
CAT. NO.
ALMOND
40249-00A†
—
—
CAT. NO.
LT ALMOND
40249-00T†
40238-00T
40280-00T
Type 625B4 Modular Wall Jack—Smooth Finish U R, Midway Plate
DESCRIPTION
[B]
CAT. NO.
BROWN
40549-000
40580-00I
6-Position, 4-Conductor
8-Position, 8-Conductor
CAT. NO.
IVORY
40549-00I
40580-00W
CAT. NO.
WHITE
40549-00W
—
CAT. NO.
LT ALMOND
40549-00T
CAT. NO.
ALMOND
4625B-44A
—
—
CAT. NO.
BROWN
4625B-044
—
—
Type 625B4 Modular Wall Jack—Smooth Finish U R,
alternate construction (not shown)
Wallplates and Housings
DESCRIPTION
C
6-Position, 4-Conductor
6-Position, 6-Conductor
8-Position, 8-Conductor
CAT. NO.
IVORY
4625B-44I
4625B-46I
4625B-48I
CAT. NO.
WHITE
4625B-44W
4625B-46W
4625B-48W
CAT. NO.
GRAY
4625B-44G
4625B-46G
—
Note: Robertson/Slot Drive screws available for 4625B series, call customer service for ordering information.
†These products are cULus Listed.
TYPE 625D F-CONNECTOR WALLPLATES
C F-Connector wallplates have one or two F-Connectors. Wallplates have a smooth finish.
UL Listed and CSA certified.
F-Connector Wallplate U R
DESCRIPTION
[B]
D
Flush-Mount Single F-Connector
Flush-Mount Duplex F-Connector
CAT. NO.
IVORY
80781-00I
80782-00I
CAT. NO.
WHITE
80781-00W
80782-00W
CAT. NO.
ALMOND
80781-00A
80782-00A
CAT. NO.
LT ALMOND
80781-00T
80782-00T
TYPE 625D COMBINATION WALL JACKS AND F-CONNECTOR WALLPLATES
D The Type 625D jacks include one modular jack (with screw terminals) for voice, and one
F-connector for cable TV or other video applications using RG6 or RG59 coax. UL Listed
and CSA Certified.
Type 625D Combination Wall Jacks and F-Connector Wallplates U R
DESCRIPTION
[C]
CAT. NO.
IVORY
6-Position, 4-Conductor and 40259-00I
F-Connector
6-Position, 6-Conductor and 40258-00I
F-Connector
CAT. NO.
WHITE
40259-00W
CAT. NO.
GRAY
40259-00G
CAT. NO.
ALMOND
40259-00A
CAT. NO.
LT ALMOND
40259-00T
40258-00W
—
—
40258-00T
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
18
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TELEPHONE INSERT WALL JACKS
Decora® Telephone Wall Jack Inserts
A
DECORA MODULAR SINGLE OR DUPLEX WALL JACK INSERTS
A
These single or duplex flush-mount voice-grade connectors fit in Leviton’s popular
Decora line of devices. Screw terminals. Includes matching Decora wallplate.
Decora Modular Wall Jack U R
DESCRIPTION
Decora Single Modular Wall Jack, 6-position 4-conductor
Decora Duplex Modular Wall Jack, 6-position 4-conductor
CAT. NO.
IVORY
40949-0ID
40944-0ID
CAT. NO.
WHITE
40949-0WD
40944-0WD
CAT. NO.
LT ALMOND
40949-OTD
40944-0TD
TYPE 625 DECORA MODULAR WALL JACKS
B
Single flush mount jack for use with Decora or Decora Plus wallplates. Mount in standard
or multi-gang electrical box. Screw terminals. UL Listed and CSA Certified.
Type 625 Decora Modular Wall Jack U R
DESCRIPTION
6-position 4-conductor
6-position 6-conductor†
8-position 8-conductor
CAT. NO.
IVORY
40649-00I
40638-00I
40680-00I
CAT. NO.
WHITE
40649-00W
40638-00W
40680-00W
CAT. NO.
GRAY
40649-0GY
40638-0GY
40680-0GY
CAT. NO.
BLACK
40649-00E
40638-00E
—
CAT. NO.
ALMOND
40649-00A
40638-00A
—
B
CAT. NO.
BROWN
40649-000
40638-000
—
† Note: Cat. No. 40680 also available in Light Almond (40680-00T)
C
Combination jack with 4-Conductor modular jack for UTP telephone connections and
F-Connector for video (coaxial cable) connections. Includes matching Decora wallplate.
Decora TV/Phone Combination Jack U R
C
DESCRIPTION
Decora TV/Phone Combination Jack, 6-position 4-conductor
CAT. NO.
IVORY
40959-0ID
CAT. NO.
WHITE
40959-0WD
CAT. NO.
LT ALMOND
40959-0TD
Midway Telephone and Telephone/F-Connector Wall Jacks
MIDWAY WALL JACKS
D, E Midway wall jacks provide a larger silhouette for a more designer look, and to easily hide
irregular drywall cuts. Choose a voice grade connector for UTP cable or an F-connector
(filled or empty) for coaxial cable. Crafted from durable, UV-resistant nylon.
QuickPort® Midway Wallplates U R
DESCRIPTION
[D] Midway Video Wallplate with F-Connector†
[E] Midway Video Wallplate without F-Connector (hexagonal opening only)
Midway Phone Wallplate with 6P4C Voice Grade Connector
Midway Wallplate with 6P4C Voice Grade Connector & F-Connector
CAT. NO.
40539-0M*
40539-HM*
40539-PM*
40539-CM*
D
Wallplates and Housings
DECORA TV/PHONE COMBINATION JACK
TYPE 625B MIDWAY DUPLEX WALL JACKS
These smooth finish midway units include 2 jacks, wallplate and mounting hardware. Wire
to provide the same dial tone on both jacks or separate lines. Screw terminals. UL Listed &
CSA Certified.
Type 625B Duplex Wall Jack U R
DESCRIPTION
Type 625B Duplex Wall Jack, 6-position 4-conductor, Midway Plate†
Type 625B Duplex Wall Jack, 6-position 6-conductor, Midway Plate
Type 625B Duplex Wall Jack, 8-position 8-conductor, Midway Plate†
CAT. NO.
IVORY
40544-00I
40566-00I
40588-00I
CAT. NO.
WHITE
40544-00W
—
40588-00W
Note: Part Numbers 40544 and 40588 are also available in Light Almond (40544-00T and 40588-00T)
*COLOR/MIDWAY WALLPLATES
For color selection, add suffix to catalog
number as follows: Ivory (I), White (W),
Almond (A), Brown (B), Light Almond (T)
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
19
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TELEPHONE WALL PHONE JACKS
A
Telephone Wall Phone Jacks
TYPE 630A QUICK-CONNECT WALL PHONE JACK WITH PLASTIC WALL PLATE
A Features quick-connect terminals, screw-on wallplate, metal bracket, mounting lugs, and
installation tool. Removable lugs and color-matched plastic inserts (included) permit
conversion from wall phone jack to flush mount jack. UL Listed and CSA Certified.
Type 630A Quick-Connect Jack with Plastic Wallplate U R
DESCRIPTION
6-Position, 4-Conductor
6-Position, 6-Conductor
CAT. NO.
IVORY
40253-00I
40263-00I
CAT. NO.
WHITE
40253-00W
40263-00W
CAT. NO.
GRAY
40253-0GY
—
CAT. NO.
ALMOND
40253-00A
—
CAT. NO.
LT ALMOND
40253-00T
40263-00T
B
TYPE 630A QUICK-CONNECT WALL PHONE JACK WITH STAINLESS STEEL WALLPLATE
B Includes 4-or 6-conductor jack with screw terminals, stainless steel screw-on wallplate.
mounting screws and installation tool.
Type 630A Quick-Connect Jack with Stainless Steel Wallplate U R
DESCRIPTION
6-Position, 4-Conductor w/ QuickPort terminations
6-Position, 6-Conductor w/ screw terminations
CAT. NO.
40223-00S
40226-00S
Wallplates and Housings
WALL PHONE JACK
C
C Single phone jack for standard wall phone. Four color-coded screw-down connections.
Wall Phone Jack U R
DESCRIPTION
CAT. NO.
IVORY
40914-00I
Wall Phone Jack
CAT. NO.
WHITE
40914-00W
CAT. NO.
ALMOND
40914-00A
CAT. NO.
LT ALMOND
40914-00T
TYPE 625B3 DUPLEX WALL JACK
D These smooth finish units include 2 jacks, wallplate and mounting hardware. Wire to provide
the same dialtone on both jacks or separate lines. Screw terminals. UL Listed & CSA Certified.
D
Type 625B3 Duplex Wall Jack U R
DESCRIPTION
Type 6255B3 Duplex Wall Jack, 6-position 4-conductor, Standard Plate*
Type 6255B3 Duplex Wall Jack, 6-position 6-conductor, Standard Plate†
CAT. NO. IVORY
40244-00I
40266-00I
CAT. NO. WHITE
40244-00W
40266-00W
* NOTE: Part Number 40244 is also available in Almond (40244-00A), Light Almond (40244-00T) and Brown
(40244-000) versions.
† NOTE: Part Number 40266 is also available in Light Almond (40266-00T)
TYPE 630A SCREW TERMINAL WALL JACK WITH PLASTIC WALLPLATE
E Features 4-conductor jack, screw terminals, screw-on wallplate and removable mounting
lugs can be converted to a flush-mount jack by replacing lugs with color-keyed plastic
inserts (included). UL Listed and CSA Certified.
E
Type 630A Screw Terminal Wall Jack with Plastic Wallplate U R
DESCRIPTION
6-position, 4-conductor
CAT. NO. IVORY
40257-00I
CAT. NO. WHITE
40257-00W
CAT. NO. LT ALMOND
40257-00T
TYPE 630A SCREW TERMINAL WALL JACK WITH SNAP-ON PLASTIC WALLPLATE
F Includes snap-on wallplate, mounting screws, and factory installed legs. UL Listed and
CSA Certified.
Type 630A Screw Terminal Wall Jack with Snap-On Plastic Wallplate U R
DESCRIPTION
F
6-position, 4-conductor
6-position, 6-conductor
CAT. NO.
IVORY
40214-00I
40216-00I
CAT. NO.
WHITE
40214-00W
40216-00W
CAT. NO.
ALMOND
40214-00A
—
CAT. NO.
LT ALMOND
40214-00T
40216-00T
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
20
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TELEPHONE WALL JACK INSERTS
Telephone Wall Jack Inserts
A
TYPE 106 DUPLEX FLUSH MOUNT MODULAR JACK WITH 110-TYPE TERMINATION
A The Type 106 duplex jack accommodates two voice and/or data terminals in the same
jack location, using standard duplex electrical wallplates. Jack choices include 4-, 6-, and
8-conductor modular jacks for voice or data, with 8-conductor keyed versions typically used
for data. Mounts easily in standard electrical boxes, most floor monuments, raceways, and
many cellular or raised floor boxes without adapters. May be ganged for multiple-port
applications. Installation is fast and easy with 110-type insulation displacement connectors
for 22-26 AWG inside wiring. UL Listed, CSA Certified, and meets FCC Part 68 requirements.
Type 106 Flush Mount Modular Jack U R
DESCRIPTION
CAT. NO.
IVORY
41364-IDI
41366-IDI
41365-IDI
CAT. NO.
WHITE
41364-IDW
41366-IDW
41365-IDW
CAT. NO.
GRAY
41364-IDG
41366-IDG
—
Line 1
Line 1
Voice
Voice
41368-IDI
41367-IDI
41361-IDI
41360-IDI
—
41367-IDW
—
—
—
—
—
—
Line 2
Line 2
Data
Data
MATERIAL CHARACTERISTICS
Flush Mount Modular Jacks
• Housing: High-impact, fire-retardant
plastic rated UL 94V0.
• Spring wire contacts: Phosphor
bronze, plated with 50 microinches
hard gold over 100 microinches
nickel.
• Wire leads: PVC-insulated, tinned
solid copper.
• Mounting screws: Combination
Phillips/straight blade head.
† Note: Part Numbers 41364 and 41361 are also available in Light Almond (41364-00T and 41361-00T)
Note: Wallplate ordering information can be found on pages L8–L12.
TYPE 105 FLUSH MOUNT MODULAR JACK WITH 110-TYPE TERMINATION
B
B The 105 single-port flush mount jack fits a standard single opening (1.406" diameter)
electrical wallplate. It is available in 4-, 6-, or 8-conductor configurations for voice and data,
with the 8-conductor keyed version typically used for data. Mounts easily in standard
single-, double-, or multi-gang electrical boxes, most floor monuments, and many cellular
or raised floor boxes. Installs quickly using industry standard 110-type insulation
displacement connectors for 22-26 AWG inside wiring. UL Listed, CSA Certified, and meets
FCC Part 68 requirements.
Type 105 Flush Mount Modular Jack U R
DESCRIPTION
One 6-Position, 4-Conductor Jack
One 8-Position, 8-Conductor Jack, T568B 3
CAT. NO.
IVORY
41054-IDD
41058-IDA
CAT. NO.
WHITE
—
41058-WDA
CAT. NO.
LT ALMOND
41054-TDD
—
Note: Wallplate ordering information can be found on pages L8–L11.
TYPE 625B ROUND MODULAR JACK WALLPLATE INSERT
C A 4-conductor jack with Type 43A mounting bracket attached. Mounts in any standard
electrical box. Slotted holes facilitate alignment. Can be used indoors or outdoors with
corresponding Leviton wallplate. For use with 4-conductor modular line cord. Screw
terminals. UL Listed & CSA Certified.
Wallplates and Housings
Two 4-Conductor USOC Jacks†
Two 6-Conductor USOC Jacks
One 6-Conductor USOC Jack and
one 8-conductor T568B CAT 3 jack
Two 8-Conductor USOC Jacks
Two 8-Conductor T568B CAT 3 Jacks
Two 8-Conductor T568B Jacks 3
One 8-Conductor T568B Jack, and
one 8-conductor keyed T568B jack 3
PORT
DESIGNATIONS
Line 1 Line 2
Line 1 Line 2
Voice Data
C
Type 625B Round Modular Jack Wallplate Insert and Wallplate U R
DESCRIPTION
Type 625B Round Modular Jack
Round Modular Jack Wallplate
CAT. NO.
IVORY
40201-00I
80704-00I
CAT. NO.
LT ALMOND
40201-00T
80704-00T
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
21
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
SURFACE MOUNT TELEPHONE JACKS
A
Surface Mount Telephone Jacks
TYPE 103 SURFACE MOUNT MODULAR JACK WITH 110-TYPE TERMINATION
A The 103 single-port surface mount jack is available in 4-, 6-, or 8-conductor configurations
for voice and data. Mounts using screws or doublesided tape (both included), or optional
magnets (see page L24). UL Listed and CSA Certified.
Type 103 Single-Port Surface Mount Modular Jack U R
DESCRIPTION
MATERIAL CHARACTERISTICS
103 Jacks
• Housings: High-impact, fire-retardant
plastic rated UL 94V0.
• Spring wire contacts: Phosphor
bronze, plated with 50 microinches
gold over 100 microinches nickel.
• 110 clips: Solder-plated phosphor
bronze.
B
6-Position, 4-conductor Jack
6-Position, 6-conductor Jack
8-Position, 8-conductor USOC Jack
8-Position, 8-conductor T568B Category 3 compliant Jack
Wallplates and Housings
MATERIAL CHARACTERISTICS
C
CAT. NO.
WHITE
—
—
—
41038-WDB
CAT. NO.
LT ALMOND
41034-TDA
41036-TDA
41038-TDA
41038-TDB
TYPE 104 DUPLEX SURFACE MOUNT MODULAR JACK WITH 110-TYPE TERMINATION
B The 104 Duplex Surface Mount Jack accommodates two voice and/or data ports. Available
in 4-, 6-, or 8-conductor configurations for voice and data. Mounts easily using screws or
doublesided tape (both included), or optional magnets (see page L23). UL Listed and
CSA Certified.
Type 104 Duplex Surface Mount Modular Jack U R
DESCRIPTION
104 Jacks
• Housings: High-impact, fire-retardant
plastic rated UL 94V0.
• Spring wire contacts: Phosphor
bronze, plated with 50 microinches
gold over 100 microinches nickel.
• 110 clips: Solderplated phosphor
bronze.
CAT. NO.
IVORY
41034-IDA
41036-IDA
41038-IDA
41038-IDB
Two 4-Conductor Jacks
Two 6-Conductor Jacks
One 6-Conductor Jack and one 8-conductor
T568B Category 3 compliant jack
Two 8-Conductor USOC Jacks
Two 8-Conductor
T568B Category 3 compliant Jacks
Two 8-Conductor
T568B Category 3 compliant Jacks,
one keyed and one non-keyed
PORT
DESIGNATIONS
Line 1 Line 2
Line 1 Line 2
Voice Data
CAT. NO.
IVORY
41044-IDA
41046-IDA
41086-IDB
CAT. NO.
LT ALMOND
41044-TDA
41046-TDA
—
Line 1
Line 1
Line 2
Line 2
41048-IDA
41048-IDB
—
41048-TDB
Data
Data
41088-IDB
—
TYPE 625A2 SURFACE MOUNT JACK
C The compact design of this “biscuit block” jack offers improved appearance and space
savings for surface-mount applications, and includes many features to facilitate installation.
Unit comes with your choice of modular jacks prewired to combo-head screw terminals.
High-reliability features include retainer comb to assure proper contact between jack and
plug. Self-tapping screws and adhesive pad are included. UL Listed and CSA Certified.
Type 625A2 Surface Mount Jack U R
DESCRIPTION
6-Position 4-Conductor
6-Position 6-Conductor
8-Position 8-Conductor
8-Position 8-Conductor (with shorting bar, RJ31X)
8-Position 4-Conductor (with shorting bar, RJ31X)
CAT. NO.
IVORY
4625A-24I
4625A-26I
40278-00I
40278-SBI
40274-SBI
CAT. NO.
WHITE
4625A-24W
4625A-26W
40278-00W
—
—
CAT. NO.
GRAY
—
—
40278-00G
—
—
CAT. NO.
LT ALMOND
4625A-24T
4625A-26T
40278-00T
40278-SBT
—
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
22
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
WORKSTATION ACCESSORIES
Workstation Accessories
SINGLE- AND DUAL-GANG SURFACE MOUNT BACKBOXES
A
B
C
D
These two-piece Surface Mount Backboxes snap snugly together to adapt Leviton flush mount
products for surface mounting. Available in two sizes with knockouts on all sides for cable entry.
Mounting options include screws and double-sided tape (installer-supplied); modular furniture
brackets (F, G, H below) or magnet mounting (E below).
Single- and Dual-Gang Surface Mount Backboxes
DESCRIPTION
[A]
[B]
[C]
[D]
Single-Gang 1.89" deep
Single-Gang 1.45" deep
Dual-Gang 1.89" deep
Dual-Gang 1.45" deep
CAT. NO.
IVORY
42777-1IA
42777-1IB
42777-2IA
42777-2IB
CAT. NO.
WHITE
42777-1WA
42777-1WB
42777-2WA
42777-2WB
CAT. NO.
GRAY
42777-1GA
42777-1GB
42777-2GA
42777-2GB
CAT. NO.
BLACK
42777-1EA
42777-1EB
42777-2EA
42777-2EB
MAGNETS
Mount surface mount products on desks and other metal surfaces.
Magnets
E
MODULAR FURNITURE BRACKETS
Use to install Leviton surface mount outlets (or flush mount devices with backbox) in many
types of modular offices. Can also be used with Leviton backboxes and surface mount 4-, 6and 12-port housings. Cold-rolled steel units snap securely into modular partitions. A cutout
allows rear cable entry for a clean, uncluttered look and tangle-free installation. Available in
black.
Modular Furniture Brackets
DESCRIPTION
[F] For Steelcase 9000®, Haworth®, Knoll Morrison®,
Allsteel®, Teknion® and Westinghouse®
[G] For Herman Miller Ethospace® and Steelcase Avenir®
[H] For Herman Miller Action Office®
CAT. NO.
49222-BLK
F
49222-ESP
49222-HAO
G
H
Wallplates and Housings
DESCRIPTION
CAT. NO.
[E] Magnets (4 per pack)
41030-SMJ
Use 1 Magnet for 2-port Surface Mount Housing. Use 2 Magnets for 4-, 6-, and 12-port Surface Mount
Housings, Single & Dual-Gang Surface Mount Backboxes, 103 & 104 type Modular Jacks.
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
23
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
PATCH PANELS
Category 6A (10G) Performance System
24-Port [1.75" H x 19.0" W]
Leviton’s eXtreme® 10G System, featuring Cone of Silence™ and Retention Force
Technology®, supports backwards compatibility for 1G and 10/100 Ethernet, as well as
advanced new 10G Base-T applications. Patent pending Cone of Silence blocks alien crosstalk
(AXT) between neighboring connectors. Retention Force Technology ensures error-free
performance over the life of the system by reinforcing tine contacts even when 4- or 6-pin
plugs have been used.
EXTREME 10G QUICKPORT® PATCH PANELS
48-Port [3.5" H x 19.0" W]
Preloaded with black eXtreme 10G connectors, panels offer universal T568A/B wiring
compatibility, 110-style IDC termination field, and labeling surfaces. Available in standard and
angled styles.
CAT 6A Performance QuickPort® Patch Panels
CAT. NO.
6910G-U24
6910G-U48
6910G-D48
Wallplates and Housings
Recessed Angled 48-Port
[3.5" H x 19.0" W x 4.8" D]
DESCRIPTION
24-Port QuickPort Patch Panel preloaded with eXtreme® 10G Connectors, 1RU
48-Port QuickPort Patch Panel preloaded with eXtreme 10G Connectors, 2RU
48-Port High-Density QuickPort Patch Panel kitted with 48 eXtreme 10G connectors and
cable management bar, 1RU
SPECIFICATIONS AND FEATURES
• Guaranteed to exceed the current TIA CAT 6A
specifications for all AXT, NEXT, FEXT, PSNEXT,
PSELFEXT, PSACR Insertion Loss and Return Loss,
with tested transmission performance
• Exceeds TIA 568 B.2-10 channel performance when
installed with Leviton approved 10G cable
• ETL verified to comply with and guaranteed to meet
IEEE 802.3an 10GBASE-T and TIA Cat 6A standards
• Proprietary technology allows the channel to surpass
proposed “6 around 1” Alien Crosstalk (AXT) test
requirements
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
24
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
PATCH PANELS
eXtreme® 6+ Universal Patch Panels
Craft-friendly eXtreme 6+ Universal Patch Panels exceed published Category 6 standards
and feature patented Retention Force Technology™ for robust long-term performance and
mechanical integrity.
These 12-, 24-, 48- and 96-port panels (and 12-port patch block) come pre-configured with
craft-friendly 110-style punchdowns on the rear and six-port RJ-45 front modules. Rear
designation labels are reversible, with color-coded diagrams for T568A, T568B and 25-pair
wiring configurations.
Patch panels feature advanced cable management and accommodate top, bottom or side
cable entry.
All eXtreme 6+ panels mount in standard 19" equipment racks, are cULus Listed and A-tick
compliant.
eXtreme 6+ Universal Patch Panels U
DESCRIPTION
Dimensions:
STYLES
12-Port Panel
24-Port Panel
N11173
CAT. NO.
12-PORT
PANEL
69586-U12
CAT. NO.
24-PORT
PANEL
69586-U24
CAT. NO.
48-PORT
PANEL
69586-U48
CAT. NO.
CENTRAL LABEL
48-PORT PANEL
69586-C48
CAT. NO.
96-PORT
PANEL
69586-U96
48-Port Panel
48-Port Panel
with Centralized Labels
10.0"H x 2.30"W
1.75"H x 19.0"W
1.75"H x 19.0"W 3.5"H x 19.0"W
3.5"H x 19.0"W
7"H x 19.0"W
*12-Port Patch Block does not include wire management bar.
eXtreme 6+ QuickPort® Patch Panels
QuickPort Category 6 Patch Panels are provided in a kit with black eXtreme 6+ connectors and
are available in 24- and 48-port versions. IRU 48-port panel provides extra density in minimal
space. Connector rear-termination field ensures easy accessibility and accommodates T568A or
T568B wiring configurations. cULus listed.
96-Port Panel
Connectors
High-density,
Pre-Configured
Patch Panel with wire
management bar
CAT. NO.
12-PORT
PATCH BLOCK*
69586-U89
12-Port
Patch Block
FEATURES
QuickPort Category 6 Patch Panels U R
DESCRIPTION
24-Port, IRU Patch Panel with eXtreme 6+ Connectors
48-Port, 2RU Patch Panel with eXtreme 6+ Connectors
48-port, IRU QuickPort High Density Patch Panel with
eXtreme 6+ Connectors with cable mgmt bar
MATERIAL CHARACTERISTICS
DIMENSIONS
1.75"H x 19"W
3.5"H x 19"W
CAT. NO.
69270-U24
69270-U48
69270-D48
Universal printed circuit-board modules— with 110 connections and rear
termination field for easy-field configurability— can be used for T568A,
T568B or 25-pair wiring schemes.
• Patch panel labeling kit features
colored slide-in front port identification labels.
• Reversible rear label slides easily into
redesigned slot and shows colorcoded diagrams for T568A, T568B
and 25-pair wiring.
• Panels and blocks are 16 gauge steel,
black painted finish with white write-on
areas silkscreened beside the connectors. Printed circuit boards and plastic
components are fire-retardant materials rated UL 94V-O.
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
25
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
PATCH PANELS and BLOCKS
UNIVERSAL T568A
& T568B
GigaMax® 5e and Category 5 Universal Patch Panels and Patch Blocks
STYLES
Copper Components
12-Port
GigaMax 5e and Category 5 Universal Patch Panels and Patch Blocks come in a variety of port
densities. Both the blocks and panels come pre-configured with 110-punchdowns on the back
and either Category 5 or GigaMax 5e six-port modules on the front. Both versions can be used
for T568A or T568B wiring configurations. The panels, available with 12 to 96 pre-configured
ports, mount in standard 19" equipment racks and accommodate top, bottom or side cable
entry. For smaller, wall-mount installations, the 12-port patch blocks are an ideal low-profile
solution.
GigaMax 5e panels are rated for both component and channel-level performance.
All panels and blocks are cULus Listed and meet all requirements of the latest published TIA
guidelines.
Universal GigaMax 5e Patch Panels U
24-Port
DESCRIPTION
48-Port
CAT. NO.
24-PORT
T568B/T568A
5G596-U12
5G596-U24
Dimensions:
1.75"H x 19.0"W 1.75"H x19.0"W
Universal Category 5 Patch Panels U
48-Port
N11173
CAT. NO.
12-PORT
DESCRIPTION
CAT. NO.
48-PORT
CAT. NO.
96-PORT
5G596-U48
CAT. NO.
CENTRAL LABEL
48-PORT
5G596-C48
3.5"H x 19.0"W
3.5"H x 19.0"W
7.0" H x 19.0" W
CAT. NO.
48-PORT
59596-U48
CAT. NO.
96-PORT
59596-U96
N11173
T568B/T568A
CAT. NO.
12-PORT
59596-U12
Dimensions:
1.75"H x 19.0"W 1.75"H x 19.0" W 3.5"H x 19.0"W
with Centralized Labels
5G596-U96
CAT. NO.
24-PORT
59596-U24
7.0"H x 19.0"W
Universal Category 5 and GigaMax 5e Patch Blocks (including Mounting Brackets)
DESCRIPTION
96-Port
FEATURES
• Connector spring wire contacts are
highest quality phosphor bronze,
plated with 50 microinches gold over
100 microinches of nickel.
• Universal printed circuit-board
modules with 110 IDC punchdowns
can be used for T568A, T568B and
25-pair wiring configurations.
MATERIAL CHARACTERISTICS
• Panels and blocks are 16 gauge steel,
black painted finish with white writeon areas silkscreened beside the connectors. Printed circuit boards and
plastic components are fire-retardant
materials rated UL 94V-O.
T568B/T568A
CAT. NO.
12-PORT CATEGORY 5
59596-U89
CAT. NO.
12-PORT GigaMax 5e
5G596-U89
Dimensions:
10.0"H x 2.30"W
10.0"H x 2.30"W
UL
®
C
US
LISTED
COMM. CIR C UIT
A C CE S SORY
40S8
N11173
GigaMax 5e QuickPort® Patch Panels
QuickPort Category 5e Patch Panels are provided in a kit with with black GigaMax 5e+ connectors
and are available in 24- and 48-port versions. Connector rear-termination field ensures easy accessibility and accommodates T568A or T568B wiring configurations. UL listed.
QuickPort Category 5e Patch Panels U R
DESCRIPTION
24-Port, IRU Patch Panel with GigaMax 5e+ Connectors
48-Port, 2RU Patch Panel with GigaMax 5e+ Connectors
48-port, 1RU Patch Panel with GigaMax 5e+ Connectors,
cable mgmt bar
DIMENSIONS
1.75"H x 19"W
3.5"H x 19"W
CAT. NO.
5G270-U24
5G270-U48
5G270-D48
Note: Use Leviton’s LabelWare™ System to quickly label your QuickPort panels. See Page L57.
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
26
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
ANGLED PATCH PANELS
extreme® 6+, GigaMax™ 5e and QuickPort® Angled Patch Panels
Angled Universal/110 Patch Panels U
B
C
N11173
DESCRIPTION
eXtreme 6+ Angled Patch Panel, 48-Port, 2RU
GigaMax 5e Angled Patch Panel, 48-Port, 2RU
Angled QuickPort Panels U
A
DIMENSIONS
3.5" x 19.0" x 4.8"
3.5" x 19.0" x 4.8"
CAT. NO.
69587-U48
5G597-U48
DIMENSIONS
3.5" x 19.0" x 4.8"
3.5" x 19.0" x 4.8"
CAT. NO.
69271-U48
5G271-U48
49256-D72
Copper Components
Simplify cable management, ease patch cord access, and increase rack density with Angled
Patch Panels from Leviton.
Panels are available in eXtreme 6+ or GigaMax 5e Universal/110-style Angled versions. Fieldconfigurable QuickPort versions accommodate any style of QuickPort connector, and are available
empty, or as kits with either Gigamax 5e+ or extreme 6+ QuickPort connectors.
All Universal panels feature 110-style punchdowns and reversible rear designation labels with
color-coded wiring diagrams for T568A, T568B and 25-pair configurations.
An array of accessories, including Horizontal Ring, 1RU and 2RU Angled Blank Panel Inserts,
Transitional Cover and Angled Cable Management Bar improves rack management.
All panels mount in standard 19" equipment racks and accommodate side cable entry. All
panels are cULus Listed and meet or exceed all requirements of applicable Category ratings.
D
N11173
DESCRIPTION
eXtreme 6+ Angled Pre-configured Patch Panel, 48-Port
GigaMax 5e Angled Pre-configured Patch Panel, 48-Port
High Density Angled Patch Panel, 72-Port, 2RU,
w/cable mgmt bar, sold empty
QuickPort Angled Patch Panel, 1RU, sold empty
QuickPort Angled Patch Panel, 48-Port, sold empty
3.5" x 19.0" x 4.8"
E
49256-H24
49256-H48
Note: See Section L3–L5 for QuickPort connector options.
Angled Panel Accessories
DESCRIPTION
[A] Angled Cable Management Bar, rear (4 Hook and Loop fasteners included)
[B] Vertical Transition Ring (Horizontal Cable Ring), 2/box
[C] Front Blank Angled Panel, 2RU
[D] Front Blank Angled Panel, 1RU
[E] Transitional Cover
Angled Horizontal Patch Cord Organizer, 1RU
Angled Horizontal Patch Cord Organizer, 2RU
CAT. NO.
49006-AMB
49262-HR1
49254-BA2
49254-BA1
49254-BC1
49254-LPM
49254-BCM
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
27
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
MULTIMEDIA PATCH PANELS AND PATCH BLOCKS
STYLES
Create a Category 5, 5e, 6 or multimedia panel instantly by matching Leviton Performance
connectors with versatile QuickPort patch panels and patch blocks. Field-configure with any
QuickPort Snap-in Modules for voice, data, audio and video, including: Category 5, GigaMax®
5e, and eXtreme® 6+ (sold separately), to configure the panel to your exact needs.
Configure patch blocks with up to 12 QuickPort modules. Patch panels range in port density
from 24 to 48 ports. 24- and 32-port panels incorporate Leviton’s exclusive ‘Quick Termination
Station’, and a cable management tray. The high-density panels include a wire management
bar. An 89D mounting bracket is sold separately for patch blocks.
A 24-Port
Copper Components
QuickPort® Multimedia Patch Panels and Patch Blocks
B 32-Port
QuickPort Multimedia Patch Panels with Cable Tray U R
C 24-Port High Density
D 48-Port High Density
FEATURES
• Cable-tie down slots accommodate
Hook and Loop Cable Management
tie-wraps and plastic cable ties.
Built-in cable management organizes
cable and helps maintain optimum
bend radii.
• Exclusive Quick Termination Stations
can be used to temporarily hold
connectors for more convenient
termination and cable dressing on
24- and 32-port standard QuickPort
panels.
DESCRIPTION
[A] 24-Port Patch Panel with Cable Tray
(Order 1 Port identification kit)
[B] 32-Port Patch Panel with Cable Tray
(Order 2 Port identification kits)
DIMENSIONS
(3.5"H x 19"W)
(3.5"H x 19"W)
CAT. NO.
49255-Q24
49257-QID
49255-Q32
49257-QID
QuickPort High Density Multimedia Patch Panels with Wire Management Bar U R
DESCRIPTION
[C] High Density 24-Port Patch Panel
w/Wire Management Bar
(Order 1-Port identification kit)
[D] High Density 48-Port Patch Panel
w/Wire Management Bar.
(Order 2-Port identification kits)
DIMENSIONS
(1.75"H x 19"W)
CAT. NO.
49255-H24
(3.5"H x 19"W)
49257-QHD
49255-H48
49257-QHD
QuickPort High Multimedia Patch Blocks U R
• QuickPort panels accept all Leviton
QuickPort snap-in connectors,
modules and blanks. Use with
Category 6, 5e or 5 connectors for
outstanding performance.
DESCRIPTION
QuickPort 12-Port Patch Block,
(mounting bracket sold separately)
QuickPort Patch Block mounting bracket,
shown above (89D)
QuickPort 12-Port Multimedia Patch Block, (extra deep)
(mounting bracket included)
DIMENSIONS
(10"H x 2.375" W)
CAT. NO.
49255-Q89
• Rugged dual-wall reinforced
construction provides secure, flush
mount module retention.
Note: The above QuickPort Multimedia Patch Panels and Blocks are sold empty. See pages L3–L7 for our full line of
QuickPort Connectors.
Note: Use Leviton’s LabelWare™ System to quickly label your QuickPort panels. See Page L59.
40089-00D
(10"H x 2.375"W)
47689-0QP
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
28
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
HIGH DENSITY AND ZERO-U PATCH PANELS
High Density Patch Panels
Leviton’s high density 1RU 48-port and 2RU 72-port style patch panels provide the extra
density you need along with robust performance. The 1RU 48-port patch panels feature
industry-first, die-cast aluminum construction for high-strength and low weight and include a
heavy-duty cable management bar to support the terminated cables. They are sold empty or
kitted with 48 category-rated QuickPort connectors. The 72-port super-high density panels
are sold empty in flat, angled and recessed-angle configurations.
A
High Density Patch Panels
DESCRIPTION
High-Density 48-Port Patch Panel w/ CAT 6A connectors, cable management bar
High-Density 48-Port Patch Panel w/CAT 6 connectors, cable management bar
High-Density 48-Port Patch Panel w/CAT 5e connectors, cable management bar
[A] High-Density 48-Port Patch Panel, empty, w/cable management bar
High-Density Cable Management Bar, sold separately
[B] High-Density 72-Port Patch Panel
High-Density 72-Port Angled Patch Panel
High-Density 72-Port Recessed Angled Patch Panel
CAT. NO.
6910G-D48
69270-D48
5G270-D48
49255-D48
49005-DMB
49255-D72
49256-D72
4W256-D72
B
VertiGO™ Zero-U Patch Panels
C
D
VertiGO Zero-U Panels
DESCRIPTION
[C] QuickPort 12-Port Zero-U Patch Panels, panel only
QuickPort 12-Port Zero-U Patch Panel, panel w/ 3" wire channel
QuickPort 12-Port Zero-U Patch Panel, panel w/ 6" wire channel
[D] Opt-X Adapter Plate Zero-U Patch Panel, panel only
Opt-X Adapter Plate Zero-U Patch Panel, panel w/ 3" wire channel
Opt-X Adapter Plate Zero-U Patch Panel, panel w/ 6" wire channel
CAT. NO.
49280-QP0
49280-QP3
49280-QP6
49280-AP0
49280-AP3
49280-AP6
E
F
G
H
QuickPort & Opt-X Adapter Plates
DESCRIPTION
[E] Opt-X Adapter Plate, 6-Pack QuickPort, sold empty
[F] Opt-X Adapter Plate, Blank
[G] Opt-X Adapter Plate, 6-Pack Duplex LC MM, (12-fiber) beige, phos. bronze sleeve
[H] Opt-X Adapter Plate, 6-Pack Duplex LC MM, (12-fiber) aqua,
zirconia ceramic sleeve
CAT. NO.
5F100-QP6
5F100-BLK
5F100-12P
5F100-12A
Shielded Patch Panel
Copper Components
Leviton’s new VertiGO Zero-U Patch Panels with Opt-X® and QuickPort Adapter Plate
compatibility (sold separately) provide the ideal solution for copper and fiber connectivity in
limited space without taking up any horizontal rack space.
Shielded patch panel provides both EMI protection and data security. Panel accepts Leviton’s
QuickPort Shutter Kit for labeling options and includes grounding wire and nickel-plating for
improved grounding, cable management bar and cable ties
QuickPort Shielded Patch Panel
DESCRIPTION
[I] QuickPort Shielded Patch Panel, 24-Port, 1RU
CAT. NO.
4S255-S24
VERTIGO FEATURES
• Ideal for data center cabinets and other highdensity network spaces.
• Mounts on the back rail of cabinets utilizing
industry standard RU fastener spacing.
• Can be installed on the right or left of the cabinet.
• Can share mounting hardware with servers or other
existing equipment.
I
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
29
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
Copper Components
HIGH DENSITY AND ZERO-U PATCH PANELS
STYLES
Voice Grade Patch Panels
Leviton's Voice Grade Patch Panels are the perfect solution for bringing voice to your cable
rack. Pre-configured in 24- and 48-Port densities, and designed specifically for voice grade
applications, these low-cost panels are available in pre-connectorized and 110-IDC versions.
A unique rear label is provided for the 110-IDC style patch panels that delineates 1-pair, 2-pair
and 4-pair termination, in addition to showing 25-pair color coded termination.
24-Port
Voice Grade Patch Panels, 110-Style U
48-Port
DESCRIPTION
N11173
Voice 8P4C Jacks, 110 termination
CAT. NO.
24-PORT
49013-P24
CAT. NO.
48-PORT
49013-P48
Dimensions:
1.75"H x 19.0"W
3.5"H x 19.0"W
Cable Management Bar
49005-CMB
49005-CMB
FEATURES
Voice Grade Patch Panels, Pre-Connected U
Cable management bar available
separately to facilitate dressing and
organization of cable.
• Printed circuit-board modules with
110 IDC-style punchdowns or
industry standard RJ21X connector
termination.
• Connector spring wire contacts are
highest quality phosphor bronze,
plated with 50 microinches gold over
100 microinches of nickel.
DESCRIPTION
N11173
Voice 8P2C Jacks, 25-pair connector
Voice 8P4C Jacks, 25-pair connector
Voice 8P8C Jacks, 25-pair connector
CAT. NO.
24-PORT
49012-J24
49014-J24
49018-J24
CAT. NO.
48-PORT
49012-J48
49014-J48
49018-J48
Dimensions:
1.75"H x 19.0"W
3.5"H x 19.0"W
Cable Management Bar
49005-CMB
49005-CMB
Note: 49004 comes without label holders, and is available only in black painted finish with white write-on areas next to
the connectors.
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
30
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
INDUSTRIAL CONNECTIVITY
DuraPort™ Industrial Connectivity
Moisture, dust, corrosion, acids, detergents, oils, and vibration – each presents a serious
threat to network connectivity, especially with repeated exposure. Defeat these threats with
patent pending DuraPort Industrial Connectivity products, Leviton’s IP67-rated line of
connector housings, patch cords, and wallplates.
DuraPort™ Industrial Connector Housings
A Connector Housings
DESCRIPTION
[A] CAT 6 Industrial Connector Housing w/Connector Cap
" CAT 5e+ Industrial Connector Housing w/Connector Cap
" Connector Cap
CAT. NO.
D6706-00E
D675E-00E
D6701-00E
DuraPort™ Industrial Stainless Steel Wallplates
DESCRIPTION
[B] Industrial Wallplate, S/S, 1-Port, Single-Gang
" Industrial Wallplate, S/S, 2-Port, Single-Gang
" Industrial Wallplate, S/S, 2-Port, Dual-Gang
" Industrial Wallplate, S/S, 4-Port, Dual-Gang
CAT. NO.
D6710-1S1
D6710-1S2
D6710-2S2
D6710-2S4
DuraPort™ Industrial Patch Cords, CAT 6
CAT. NO.
D6720-03E
D6720-05E
D6720-07E
D6720-10E
D6720-15E
D6720-20E
D6721-03E
D6721-05E
D6721-07E
D6721-10E
D6721-15E
D6721-20E
B Stainless Steel Wallplates
C Plug-to-Industrial Plug
Duraport™ Industrial Outlet Kits
DESCRIPTION
[E] Industrial Outlet Kit, S/S, 1-Port, Single-Gang
Industrial Outlet Kit, S/S, 2-Port, Single-Gang
Industrial Outlet Kit, S/S, 2-Port, Dual-Gang
Industrial Outlet Kit, S/S, 4-Port, Dual-Gang
CAT. NO.
D670K-1S1
D670K-1S2
D670K-2S2
D670K-2S4
Copper Components
DESCRIPTION
[C] Industrial Plug-to-Industrial Plug, 3-ft
" Industrial Plug-to-Industrial Plug, 5-ft
" Industrial Plug-to-Industrial Plug, 7-ft
" Industrial Plug-to-Industrial Plug, 10-ft
" Industrial Plug-to-Industrial Plug, 15-ft
" Industrial Plug-to-Industrial Plug, 20-ft
[D] Industrial Plug-to-RJ45 Plug, 3-ft
" Industrial Plug-to-RJ45 Plug, 5-ft
" Industrial Plug-to-RJ45 Plug, 7-ft
" Industrial Plug-to-RJ45 Plug, 10-ft
" Industrial Plug-to-RJ45 Plug, 15-ft
" Industrial Plug-to-RJ45 Plug, 20-ft
D Industrial Plug-to-RJ45
SPECIFICATIONS AND FEATURES
DuraPort™ Industrial Connector Housings
• Made of Polybutylene Terephthalate (PBT) for
strength and chemical resistance.
DuraPort™ Industrial Wallplates
• Molded gasket with embedded sealing feature for
wallplate mounting holes, ensures a watertight fit.
DuraPort™ Industrial Patch Cords
• Sheathed in Thermoplastic Elastomer to resist heat,
abrasion, and tearing.
DuraPort™ Industrial Outlet Kits
• Pre-assembled stainless steel wallplate with an
appropriate number of connector housings and
connector caps.
E Outlet Kits
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
31
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
PATCH CORDS
Performance Patch Cords
A
A
Leviton’s eXtreme 10G, eXtreme 6+, GigaMax 5e and Category 5 patch cords meet or
exceed industry starndard specifications and use compliant stranded wirer as specified
by the latest TIA guidelines, to ensure adequate “flex life”. All have quality consturcito
nto maintain the integriey of signal transmission at the vross-connect , which is critical to
the performance of the entire cabling system. Available in lengths of 3’, 5’, 7’, 10’, 15’
and 20’, in seven colors.
NOTE: Leviton Performance Patch Cords are required to qualify for the Leviton Lifetime Warranty on
Certified installations.
B
Standard Patch Cords U
DESCRIPTION
3-foot length (.91 m)
5-foot length (1.52 m)
7-foot length (2.13 m)
10-foot length (3.05 m)
15-foot length (4.57 m)
20-foot length (6.10 m)
CAT. NO.
eXtreme 10G
6210G-03*
6210G-05*
6210G-07
6210G-10
6210G-15
6210G-20
CAT. NO.
eXtreme 6+
62460-03*
62460-05*
62460-07*
62460-10*
62460-15*
62460-20*
CAT. NO.
GigaMax 5e
5G460-03*
5G460-05*
5G460-07*
5G460-10*
5G460-15*
5G460-20*
CAT. NO.
CATEGORY 5
52455-03*
52455-05*
52455-07*
52455-10*
52455-15*
52455-20*
* = Colors: White(W), Yellow(Y), Red(R), Blue(B), Green(G), Grey(S), Black(E)
Copper Components
C
Slimline Patch Cords
SlimLine Patch Cords make it easy to get connected in both traditional and high-density
applications. Bootless design and narrow Slimline profile are ideal in environments where rack
space is especially tight. The snagless design prevents plugs form becoming entangled in
nearby cables and the easy-access quick-release tab makes connections and disconnections
easier. Flexible two-piece strain relief boot ensures excellent connectivity. Available in Category
5e and 6 ratings.
SlimLine Patch Cords
DESCRIPTION
3-foot length (.91 m)
5-foot length (1.52 m)
7-foot length (2.13 m)
10-foot length (3.05 m)
15-foot length (4.57 m)
20-foot length (6.10 m)
CAT. NO.
5D460-03*
5D460-05*
5D460-07*
5D460-10*
5D460-15*
5D460-20*
CAT. NO.
6D460-03*
6D460-05*
6D460-07*
6D460-10*
6D460-15*
6D460-20*
* = Colors: White(W), Yellow(Y), Red(R), Blue(B), Green(G), Grey(S), Black(E)
Shielded Patch Cords
Shielded Patch Cords, part of Leviton’s full line of shielded products, provide enhanced EMI/RFI
protection and increased data security for government, financial, and other critical applications.
These Category 5e and Category 6 patch cords are available in 6 lengths. Grey only.
SlimLine Patch Cords
DESCRIPTION
CAT. NO.
CAT. NO.
3-foot length (.91 m)
5S460-03S
6S460-03S
5-foot length (1.52 m)
5S460-05S
6S460-05S
7-foot length (2.13 m)
5S460-07S
6S460-07S
10-foot length (3.05 m)
5S460-10S
6S460-10S
15-foot length (4.57 m)
5S460-15S
6S460-15S
20-foot length (6.10 m)
5S460-20S
6S460-20S
NOTE: Leviton Patch Cords (Standard, SlimLine or Shielded) are required to qualify for the Leviton Lifetime Warranty on
Certified installations.
*COLOR/PATCH CORDS
For color selection, add suffix to catalog
number as follows: Ivory (I), White (W),
Gray (G), Black (E), Blue (L), Red (R),
Green (G), Yellow (Y).
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
32
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
EXTREME 6+ 110-STYLE WIRING PRODUCTS
C
B
A
eXtreme 6+ 110-Style Wiring Products
Leviton’s 110-Style Wiring Products are perfect for quick and easy cross connects in a minimum
of space. Achieve top performance and network integrity at consolidation points, even at
Category 6 levels. Building a cross-connect system for voice and data is effortless.
eXtreme 6+ 110-Style Wiring Blocks are available in 96- and 288-Pair units, with or without
legs for wall mount applications. We also offer 96-, 192- and 288-pair rack-mount units. All kits
include C-4 clips.
A full selection of patch cords is available for easy connection to network equipment. All units
meet or exceed Category 6 transmission requirements.
eXtreme 6+ Cat 6 110-Style Wiring Block
N11173
Copper Components
D
– Kitted Versions
DESCRIPTION
[A] eXtreme 6+ 110-Style Wiring Block, Wall-Mount w/o legs, CAT 6, 96-Pair
[B] eXtreme 6+ 110-Style Wiring Block, Wall-Mount w/legs, CAT 6, 96-Pair
[C] eXtreme 6+ 110-Style Wiring Block, Wall-Mount w/legs, CAT 6, 288-Pair
[D] eXtreme 6+ 110-Style Wiring Block, Rack-Mount, CAT 6, 96-Pair
eXtreme 6+ 110-Style Wiring Block, Rack-Mount, CAT 6, 192-Pair
eXtreme 6+ 110-Style Wiring Block, Rack-Mount, CAT 6, 288-Pair
CAT. NO.
41NB6-1F4
41AB6-1F4
41AB6-3F4
41DR6-1F4
41DR6-2F4
41DR6-3F4
Note: Category 5e and 6 110 wiring block legs are non-removable.
Note: Identify all of your 110 products with LabelWare™ 110 wiring product labels. See page L59.
Note: All kits include C-4 clips.
MATERIAL CHARACTERISTICS
• C-4 connector clips (sold separately
or included in kitted versions) are
fire-retardant UL 94V-0 plastic with
solder-plated IDC’s.
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
33
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
EXTREME 6+ 110-STYLE PATCH CORDS and CONNECTOR CLIPS
A
B
Copper Components
C
eXtreme 6+ 110-Style Patch Cords
A, B Make your network connections with eXtreme 6+ 110-style Patch Cords, a quick solution for
110 to 110 and 110 to RJ45 applications (in both T568A and T568B wiring configurations).
Cords are gray with gray boots and are offered in 1', 2', 3', 5', 7' and 10' lengths. All cords
meet or exceed all Category 6 transmission requirements.
eXtreme 6+ Cat 6 110-Style Patch Cords
DESCRIPTION
[A]
CAT. NO.
1-FOOT
62240-01S
CAT 6 110 to
110-Style Patch
Cord, 4 pair
[B] CAT 6 110 to
6234A-01S
T568A Patch
Cord, 4 pair
CAT 6 110 to
6234B-01S
T568B Patch
Cord, 4 pair
N11173
CAT. NO.
2-FOOT
62240-02S
CAT. NO.
3-FOOT
62240-03S
CAT. NO.
5-FOOT
62240-05S
CAT. NO.
7-FOOT
62240-07S
CAT. NO.
10-FOOT
62240-10S
6234A-02S
6234A-03S
6234A-05S
6234A-07S
6234A-10S
6234B-02S
6234B-03S
6234B-05S
6234B-07S
6234B-10S
eXtreme 6+ 110-Style Connector Clips
C Choose these connector clips for a high-quality, gas-tight connection to ensure signal
integrity in your Category 6 applications. Clips withstand 200 re-terminations and are made
of fire-retardant plastic rated UL 94V-0 with solder-plated IDCs.
eXtreme 6+ Cat 6 110-Style C-4 Clip
DESCRIPTION
[C] eXtreme 6+ C-4 Clip, CAT 6 (bag of 10)
N11173
CAT. NO.
69104-IDC
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
34
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
™
GIGAMAX 5E 110-STYLE WIRING PRODUCTS
C
I
F
H
B
G
E
A
D
Copper Components
GigaMax 5e 110-Style Wiring Products
WALL-MOUNT 110-STYLE WIRING PRODUCTS
Create compact, adaptable 110 termination fields for voice and data by mounting 110 wiring
bases to the wall or a backboard. Bases come in 50-, 100- or 300-pair densities. The 50- and
100-pair bases may be ordered with or without standoff legs. All 300-pair bases include standoff legs, label strip holders and white paper labels. A 50-pair 89D bracket configuration is also
available (89D bracket sold separately, page L39).
Complete kits are available for 100- and 300-pair wall-mount units and 89D wiring base, and
include bases, C-4 or C-5 connecting blocks, label holders and white paper labels.
All components are UL listed and exceed the latest TIA-568-B standards and Category 5e
transmission requirements. Verified by independent testing.
GigaMax 5e 110-Style Wall-Mount Wiring Products
DESCRIPTION
[A] GigaMax 5e 110-Style Wiring Block, Wall-Mount w/legs, Cat 5e, 50-Pair
[B] GigaMax 5e 110-Style Wiring Block, Wall-Mount w/legs, Cat 5e, 100-Pair
[C] GigaMax 5e 110-Style Wiring Block, Wall-Mount w/legs, Cat 5e, 300-Pair
[D] GigaMax 5e 110-Style Wiring Block, Wall-Mount w/o legs, Cat 5e, 50-Pair
[E] GigaMax 5e 110-Style Wiring Block, Wall-Mount w/o legs, Cat 5e, 100-Pair
GigaMax 5e 110-Style legs (2 ea) for use with 41DW1
[F] GigaMax 5e 110-Style legs (2 ea) for use with 41DW2
[G] GigaMax 5e 110-Style Horizontal Cord Manager w/o legs
[H] GigaMax 5e 110-Style Horizontal Cord Manager w/ legs
[I] GigaMax 5e 110-Style 50-Pair 89-D Base
CAT. NO.
41AW1-050
41AW2-100
41AW2-300
41DW1-050
41DW2-100
410L2-050
410L2-100
41D10-HCM
41A10-HCM
41DW1-589
GigaMax 5e 110-Style Wall-Mount Wiring Products – Kitted Versions
DESCRIPTION
[J]
Wiring Block, Wall-Mount w/legs kit, Cat 5e, 100-Pair
Wiring Block, Wall-Mount w/o legs kit, Cat 5e, 100-Pair
Wiring Block, Wall-Mount w/legs kit, Cat 5e, 300-Pair
CAT. NO.
C-4 CLIPS
41AB2-1F4
41NB2-1F4
41AB2-3F4
CAT. NO.
C-5 CLIPS
41AB2-1F5
41NB2-1F5
41AB2-3F5
Note: Category 5e and 6 110 wiring block legs are non-removable.
MATERIAL CHARACTERISTICS
• Horizontal cord managers and 110
wiring bases feature sturdy construction of fire-retardant plastic rated UL
94V-0. C-4 and C-5 connector blocks
(sold separately or included in kitted
versions) are fire-retardant UL 94V-0
plastic with solder-plated IDC’s.
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
35
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
RACK-MOUNT 110-STYLE WIRING PRODUCTS
C
B
D
A
Copper Components
Rack-Mount 110-Style Wiring Products
Rack-Mount 110 Wiring Products attach to standard 19" wide racks to create compact,
adaptable 110 termination fields for voice and data. Panels come in 100-, 200- or 300-pair
densities and terminate 22-26 AWG solid copper wire. Cord management is provided by
horizontal cord managers (sold separately).
Kits for 100-, 200- and 300-pair rack-mount panels include the panel, C-4 and C-5 connecting
blocks, label strip holders and white paper labels.
Horizontal cord managers and 110 wiring bases feature sturdy single-piece construction of fireretardant plastic rated UL 94V-0. Wiring bases are attached to 19" wide steel rack-mount
panels, painted black. Screws are included for mounting the panels onto 19" racks. C-4 and C-5
connector blocks are fire-retardant UL 94V-0 plastic with solder-plated IDC’s.
All components are UL Listed, and exceed Category 5e transmission requirements. Verified by
independent testing.
GigaMax® 5e 110-Style Rack-Mount Wiring Blocks U
DESCRIPTION
[A] GigaMax 5e 110-Style Wiring Block, Rack-Mount, Cat 5e, 100 Pair
[B] GigaMax 5e 110-Style Wiring Block, Rack-Mount, Cat 5e, 200 Pair
[C] GigaMax 5e 110-Style Wiring Block, Rack-Mount, Cat 5e, 300 Pair
[D] Rack-Mount Horizontal Cord Manager
(for part numbers listed above and below).
CAT. NO.
41DR2-100
41DR2-200
41DR2-300
41D1R-HCM
GigaMax 5e 110-Style Rack-Mount Wiring Products – Kitted Versions
DESCRIPTION
[E]
GigaMax 5e 110-Style Wiring Block, Rack-Mount kit,
Cat 5e, 100-Pair
GigaMax 5e 110-Style Wiring Block, Rack-Mount kit,
Cat 5e, 200-Pair
GigaMax 5e 110-Style Wiring Block, Rack-Mount kit,
Cat 5e, 300-Pair
CAT. NO.
C-4 CLIPS
41DBR-1F4
CAT. NO.
C-5 CLIPS
41DBR-1F5
41DBR-2F4
41DBR-2F5
41DBR-3F4
41DBR-3F5
Note: Leviton’s Label Holders and Strips are ideal for identification of all your key 110 connections. See page L60.
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
36
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
GIGAMAX 5e 110-STYLE PATCH CORDS and CONNECTOR CLIPS
C
A
D
B
GigaMax 5e 110-Style Patch Cords
E
GigaMax 5e 110-Style Patch Cords A-Tick
DESCRIPTION
[A]
110 to 110
Patch Cord,
1 pair
[B] 110 to 110
Patch Cord,
2 pair
[C] CAT 5e,
110 to110
Patch Cord,
4 pair
[D] CAT 5e,
110 to 568A
Patch Cord,
4 pair
CAT 5e,
110 to 568B
Patch Cord,
4 pair
N11173
CAT. NO.
1-FOOT
5G210-01S
CAT. NO.
2-FOOT
5G210-02S
CAT. NO.
3-FOOT
5G210-03S
CAT. NO.
5-FOOT
5G210-05S
CAT. NO.
7-FOOT
5G210-07S
CAT. NO.
10-FOOT
5G210-10S
5G220-01S
5G220-02S
5G220-03S
5G220-05S
5G220-07S
5G220-10S
5G240-01S
5G240-02S
5G240-03S
5G240-05S
5G240-07S
5G240-10S
5G34A-01S
5G34A-02S
5G34A-03S
5G34A-05S
5G34A-07S
5G34A-10S
5G34B-01S
5G34B-02S
5G34B-03S
5G34B-05S
5G34B-07S
5G34B-10S
Copper Components
A–D Make quick connections with GigaMax 110-Style Patch Cords. Available in 110 to 110
for cross connects and 110 to RJ45 (in both T568A and T568B wiring configurations) to
connect to a panel or nearby workstation. The cords are offered in 1', 2', 3', 5', and 10'
lengths, in gray with gray boots.
GigaMax 5e 110-Style Connector Clips
E These high-quality connector clips securely seat the wires on 110 wiring bases, providing a
gas-tight IDC connection that maintains signal integrity for high performance applications.
Available in three Category 5/5e pair-count sizes: C-3, C-4 and C-5. These clips withstand 200
reterminations, and are made of fire-retardant plastic rated UL 94V-0 with solder-plated
insulation displacement connectors.
GigaMax 5e 110-Style Connector Clip U
DESCRIPTION
GigaMax 5e 110-Style C-3 Connector Clips (bag of 10)
GigaMax 5e 110-Style C-4 Connector Clips (bag of 10)
GigaMax 5e 110-Style C-4 Connector Clips (bag of 50)
GigaMax 5e 110-Style C-5 Connector Clips (bag of 10)
CAT. NO.
49103-IDC
49104-IDC
49104-I50
49105-IDC
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
37
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
110-STYLE WALL-MOUNT FRAMES
Copper Components
110-Style Wall-Mount Frames
A
B
A–D For 110 wall-mount applications, mounting frames provide additional options for cord/cable
management, access, and density via a rear cable channel, side slots, horizontal cord
managers and a bottom cable tray. Components are offered individually or in kits (see
ordering information below for description of included parts).
Begin with the basic mounting frames and vertical cord managers. Each has a 300-pair
capacity—room for three 100-pair wiring bases, with 100-pair horizontal cord managers in
between. The capacity for each mounting frame or vertical manager may be increased to 600
or 900 pairs with the addition of up to two 300-pair extension units.
Frames, trays and vertical cord managers are composed of sturdy steel, painted black; wiring
bases, connector blocks and horizontal cord managers are fire-retardant plastic rated UL
94V-0. Kits include screws for attaching wiring bases and cord managers to the mounting
frame. All components are UL Listed and exceed Category 5e transmission requirements.
Verified by independent testing.
Wall-Mounting Frame 110-Style Wiring Products
D
C
DESCRIPTION
[A] 300-pair Basic Mounting-Frame Unit (sheet metal frame and
bottom cable tray only).
[B] 300-pair Extension Mounting-Frame Unit (sheet metal frame only).
Basic Mounting Frame Kit with three 100-pair bases; mounting frame;
cable tray; C-4 connector blocks; three horizontal cord managers;
label strip holders and white label strips.
Extension Mounting Frame Kit with three 100-pair bases; mounting frame;
C-4 connector blocks; three horizontal cord managers; label strip
holders and white label strips.
[C] 300-pair Vertical Cord Manager, Basic unit; includes bottom cable tray.
[D] 300-pair Vertical Cord Manager, Extension unit.
Rack-Mount Horizontal Cord Manager (Not Shown)
CAT. NO.
41MB2-SMF
41MB2-SME
41MB2-3FT
41MB2-EXT
41880-300
41880-EXT
41D1R-HCM
E
110-Style ChannelMax™ System
F
E–H Manage your cable with the 110 ChannelMax System, perfect to maximize control in
minimum space. Cable channel provides extra room in the rear, cable trough allows a
clean connection at the CP/frame, and vertical spool manager helps to dress crossconnect cables.
110-Style Channel System
H
G
DESCRIPTION
[E] 3" Deep Vertical Cable Channel
[F] 5" Deep Vertical Cable Channel
[G] Horizontal Cable Management Trough
[H] Vertical Spool Manager Mounting Bracket
CAT. NO.
41CMS-300
41CMS-500
41CMS-HCM
41CMS-VSM
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
38
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
66-CONNECTING PRODUCTS
66-Clip Connecting Blocks
A variety of M Blocks, including 25-pair and split 50-pair styles, provide versatile cross connect
points in equipment and telecommunications rooms. Install individually or in pairs.
Constructed of high-impact, fire-retardant UL 94V-0 plastic with phosphor bronze quick-connect insulation displacement 66-clips. Install individually or in pairs in a cross-connect system
using jumper wires or bridging clips.
66-Clip Connecting Blocks U
DESCRIPTION
[A] M Block: 25-pair (66M1-25) 10"H x 35/16"W x 13/16"D
Split M Block: 50-pair (66M1-50) 10"H x 35/16"W x 13/16"D
M Block with female connector (66M1-50W) 10"H x 35/16"W x 13/16"D
[B] M Block with female and male connectors (66M1-50W2)
10"H x 35/16"W x 13/16"D
[C] Connectorized Demarc Block (66M1-50R) 10"H x 313/32"W x 23/4"D
female amphenol
CAT. NO.
40066-M25
40066-M50
40066-0MW
40066-MW2
A
40066-0MR
66-Clip Connecting Block Accessories
Accessories include Covers for M Blocks and Demarc Blocks, M-Block Brackets for
Jack/Connector Mounting, Wire Distribution Spools, Modular Adapters and Bridging Clips.
Bridging Clips
CAT. NO.
40067-0BC
Hinged Covers and Snap-On Covers
DESCRIPTION
Snap-on Cover for M blocks (66MC-4) 9-15/16" H x 2-5/16" W x 5/16" D
Hinged Cover for Demarc blocks: orange (66MC4LH-O)
10" H x 2-7/16" W x 3/4" D
Hinged Cover for M blocks: grey (66MC4LH-G) 10" H x 2-7/16" W x 3/4" D
CAT. NO.
40050-MCV
40050-MH0
40050-MHG
C
Bracket for M Blocks and Connector Mounting
DESCRIPTION
[E] M-block Bracket for connector mounting (89-D/QuickPort Blocks)
10" H x 3-13/32" W x 1-1/2" D
CAT. NO.
40089-00D
Note: Numbers in parentheses refer to industry product designation.
Copper Components
DESCRIPTION
[D] Bridging Clips (SA-1), bag of 50
B
D
E
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
39
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
66-CONNECTING BLOCK ACCESSORIES
66-Clip Connecting Block Accessories (continued)
Modular Adapters
DESCRIPTION
[F] Position Modular Adapter (Tap™-2) - Converts two 66-clip contacts
into a 6P2C modular jack
4-Position Modular Adapter (Tap™-4) - Converts four contacts
into a 6P4C modular jack
6-Position Modular Adapter (Tap™-6) - Converts six contacts
into a 6P6C modular jack
8-Position Modular Adapter, T568B wiring (Tap™-008) Converts eight contacts 8P8C non-keyed modular jack
F
CAT. NO.
40072-0T2
40072-0T4
40072-0T6
40072-0T8
Wire Distribution Spools
DESCRIPTION
[G] Wire Distribution Spool (20-A) 1-3/4" Dia. x 3" H
[H] Wire Distribution Spool with screw (20-B) 1-3/4" Dia. x 3" H
G
CAT. NO.
40054-0DS
40054-DSS
Note: Number in parentheses refers to industry product designation.
Surface-Mount Mini Patch Panels
H
Copper Components
For applications with space limitations or simple breakout patching, the Mini Patch Panel with
modular connectors can be mounted almost anywhere. Combine two or more panels in-line
and use patch cords to make and change connections.
Surface-Mount Mini Patch Panels U R
J
I
K
DESCRIPTION
[I] 25 6-position 2-conductor (RJ11) FCC Spec Jacks connected to a
circuit board with one male 25-pair connector in surface-mount housing.
Wired in standard T-R sequence (26-1, 27-2, 28-3, etc).
[J] 25 6-position 4-conductor (RJ14) FCC Spec Jacks wired into two male
25-pair connectors in standard T-R sequence.
[K] 25 6-position 2-conductor (RJ11) FCC Spec Jacks connected to a circuit
board with two bridged 25-pair connectors (one male and one female) in
standard T-R sequence for series connection.
Mounting Magnets (20 Per Package)
CAT. NO.
41600-00I
41610-00I
41620-00I
49200-00M
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
40
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
OPT-X 1000 1RU FIBER OPTIC ENCLOSURES
SEE FIBER DENSITY
CHART, PAGE L48
Front and rear tilt-up lids that
provide unobstructed access to
adapters and mounting plates.
Slide rail option allows easy
installation and re-entry
regardless of equipment or
enclosures above.
0-12 ST connector bulkhead
0-24 ST connector bulkhead
Mounting brackets are
reversible for mid- or flushmounting in 19" racks.
High-density adapter enclosure houses up
to 24 ST® or 12 duplex SC adapters.
Another version accepts three six-fiber
mounting plates; configure with ST, FC, SC,
LC and MT-RJ or add a QuickPort plate to
create a multimedia enclosure.
0-24 SC connector bulkhead
Three six pack plate bulkhead
DESCRIPTION
24 Fiber w/6 ST adapters
24 Fiber w/3 duplex SC adapters
72 Fiber, empty (accepts 3 adapter plates, sold sep.)
24 Fiber, loaded w/12 ST adapters
24 Fiber, loaded w/6 duplex SC adapters
24 Fiber, unloaded, punched for ST adapters
24 Fiber, unloaded, punched for duplex SC adapters
24 Fiber loaded w/24 ST adapters
24 Fiber loaded w/12 duplex SC adapters
CAT. NO.
W/O RAILS
5R030-0AB
5R030-0HB
5R130-00N
5R230-0AB
5R230-0HB
5R330-0AA
5R330-0HA
5R330-0AB
5R330-0HB
CAT. NO.
W/RAILS
5P030-0AB
5P030-0HB
5P130-00N
5P230-0AB
5P230-0HB
5P330-0AA
5P330-0HA
5P330-0AB
5P330-0HB
Opt-X 1000 Low-Profile Rack-Mount
shown in open view.
Fiber Components
Opt-X 1000 Low-Profile Rack-Mount Enclosures (1RU) 1.75"H x 19.0"W x 12.0"D U
Add-On Slide Rail Kit
DESCRIPTION
Slide Rail Kit for IRU enclosures only
CAT. NO.
5S100-SLM
Replacement Door
DESCRIPTION
24 Fiber Rack-Mount Metal 1RU Replacement Door
CAT. NO.
5D000-1RM
LOADED = The enclosure’s bulkhead contains the specified couplings.
UNLOADED = The enclosure includes a bulkhead which has openings for, but does not include, the specified couplings.
EMPTY = No bulkhead coupling plates are included.
Note: For mounting plates and accessories, see pages L47-49.
Note: Custom lengths and configurations on pigtails available; call customer service for more information: 1-800-722-2082
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
41
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
OPT-X 1000 2RU FIBER OPTIC ENCLOSURES
Horizontal entry ports in the
front and back and vertical
entry ports in the rear offer
egress/ ingress for distribution
of patch cables.
SEE FIBER DENSITY
CHART, PAGE L48
Fiber Components
Metal or smoked
polycarbonate doors.
Metal doors are available
with or without a lock.
Front and rear tilt-up lids that
provide unobstructed access to
adapters and mounting plates.
Room for up to 6 Mounting
Plates, housing a wide variety
of SC, FC, ST, LC and MT-RJ
adapters. See Fiber Density
Chart on page L47.
Opt-X 1000 Fiber Optic Enclosures (2RU) 3.5"H x 19.0"W x 12.0"D U
DESCRIPTION
2RU Enclosure with Metal Door (no lock)
2RU Enclosure with Metal Door and one Lock/key
2RU Enclosure with Poly Door (No Lock)
CAT. NO.
5R430-00N
5R440-00N
5R460-00N
Replacement Doors
DESCRIPTION
2RU Replacement Metal Door
2RU Replacement Poly Door
CAT. NO.
5D000-2RM
5D000-2RP
Accessories
DESCRIPTION
12 Splice Tray
3M Fibrlock™ Splice Holder
AT&T Rotary Splice Holder
Lock and Key
Slide mounts (kit)
Fiber rings, 2 per pack, 2.5" diameter
Wall mount or rack mount for
maximum flexibility. Mid- or flushmount the 2RU in any space on a
standard 19" or 23" rack, or use the
universal mounting brackets to flush
mount on a wall.
CAT. NO.
5T000-00T
5T000-3MT
5T000-ATT
5L000-LOK
5S100-SLM
5R100-OFR
PLEASE NOTE: All STOCK configurations of this rack-mount enclosure are sold ‘empty,’ or without any mounting plates
installed. Capacity is dependent upon configuration of mounting plates as shown in note. Rack-mount enclosures DO
include grounding/strain relief, grommets, labels, and the appropriate number of cable management rings.
Note: For mounting plates and accessories. See pages L47-L49.
Note: Custom lengths and configurations on pigtails available; call customer service for more information: 1-800-722-2082
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
42
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
OPT-X 1000 3RU and 6RU FIBER OPTIC ENCLOSURES
Tilt-up rear door provides
unobstructed access to the
fiber loop.
SEE FIBER DENSITY
CHART, PAGE L48
Front and rear doors
drop down flat to act
as a workshelf, or
can be removed
completely. Available
in metal or smoked
polycarbonate.
Fiber Components
Reversible mounting brackets allow
mounting on 19" or 23" industry standard
equipment frames; move forward for flush
mount positioning in NEMA enclosures.
Opt-X 1000 Rack-Mount Enclosures, 3 Rack Units High (3RU) 5.25"H x 19.0"W x 12.0"D U
DESCRIPTION
3RU, Empty with metal door, no lock
3RU, Empty with metal door and one lock/key
3RU, Empty with smoked polycarbonate door, no lock
CAT. NO.
5R730-00N
5R740-00N
5R760-00N
Opt-X 1000 Rack-Mount Enclosures, 6 Rack Units High (6RU) 10.25"H x 19.0"W x 12.0"D U
DESCRIPTION
6RU, Empty with metal door, no lock
6RU, Empty with metal door and one lock/key
6RU, Empty with smoked polycarbonate door, no lock
CAT. NO.
5R930-00N
5R940-00N
5R960-00N
Add-On Slide Rail Kit
DESCRIPTION
Slide rail kit for 3RU or 6RU fiber Rack-Mount enclosures only
CAT. NO.
5S100-SLM
Replacement Doors
DESCRIPTION
3RU Rack-Mount replacement metal door
3RU Rack-Mount replacement smoked poly door
CAT. NO.
5D000-3RM
5D000-3RP
Add-On Lock and Key
DESCRIPTION
Add security to an existing door for this enclosure—simply remove
the black plastic plug on the door front, and replace with lock mechanism.
Lock and Key
CAT. NO.
5L000-LOK
PLEASE NOTE: All STOCK configurations of this rack-mount enclosure are sold ‘empty,’ or without any mounting plates
installed. Capacity is dependent upon configuration of mounting plates as shown in note. Rack-mount enclosures DO
include grounding/strain relief, grommets, labels, 8 or 16 blank plastic mounting plates, and the appropriate number of
cable management rings.
Note: For mounting plates and accessories. See pages L47-49.
FEATURES
• Includes 8 (3RU) or 16 (6RU) plastic
blank mounting plates to inexpensively
fill up any unused locations.
• Houses up to 12 (3RU) or 24 (6RU)
mounting plates for assorted fiber or
multimedia applications. See chart
on page L48.
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
43
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
OPT-X 1000 WALL-MOUNT FIBER OPTIC ENCLOSURES
Fiber Components
Doors are L-shaped for maximum access to couplings
through the open sidewall.
Door options:
• Split with single lock
• Split with two locks
(custom option)
• Solid with single lock
• Solid without lock
Houses 2 (small), 4 (medium) or
12 mounting plates for assorted
fiber or multimedia applications.
See chart on page L47.
SEE FIBER DENSITY
CHART, PAGE L48
Unique cable management ring
is adjustable and stackable to
simplify fiber loop installation,
bend radius compliance, and
future maintenance/additions.
Stores 3 meters of 900 micron
fiber per adapter.
Sidewall cutout gives completely
unobstructed access to the
mounting plates when door is
open (covered when door is
closed).
Opt-X 1000 Small Wall-Mount Enclosures 8.0"H x 13.0"W x 3.5"D U
DESCRIPTION
Small, Empty with solid metal door, no lock, holds no splice trays
Small, Empty with split metal door and one lock/key, holds no splice trays
Small, Empty with solid metal door and lock/key, holds no splice trays
CAT. NO.
5W110-00N
5W120-00N
5W170-00N
Opt-X 1000 Medium Wall-Mount Enclosures 14.0"H x 12.0"W x 5.25"D U
DESCRIPTION
Medium, Empty with solid metal door, no lock, holds 6 splice trays
Medium, Empty with split metal door and one lock/key, holds 6 splice trays
Medium, Empty with solid metal door and one lock/key, holds 6 splice trays
CAT. NO.
5W310-00N
5W320-00N
5W370-00N
Opt-X 1000 Large Wall-Mount Enclosures 17.0"H x 15.0"W x 5.25"D U
DESCRIPTION
Large, Empty with solid metal door, no lock, holds 6 splice trays
Large, Empty with split metal door and one lock/key, holds 6 splice trays
Large, Empty with solid metal door and lock/key, holds 6 splice trays
CAT. NO.
5W710-00N
5W720-00N
5W770-00N
Add-On Lock and Key
DESCRIPTION
Add security to an existing metal enclosure door. Simply remove the black
plastic plug on the door front, and replace with lock mechanism.
Lock and Key
CAT. NO.
5L000-LOK
PLEASE NOTE: All STOCK configurations of this wall-mount enclosure are sold ‘empty,’ or without any mounting plates
installed. Capacity is dependent upon configuration of mounting plates shown on page L48. The wall-mount enclosures DO
include grounding/strain relief, grommets, labels, and the appropriate number of cable management rings. Large WallMount Enclosure includes 8 blank plastic mounting plates.
Note: For mounting plates and accessories. See page L48.
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
44
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
®
OPT-X 500 and OPT-X 250 FIBER OPTIC ENCLOSURES
Opt-X 500 1RU, 2RU and 3RU Fiber Optic Enclosures
SEE FIBER DENSITY
CHART, PAGE L48
B
C
A
Opt-X 500 Fiber Enclosures, 3 Rack Units High (3RU) 5.25"H x 19.0"W x 12.0"D U
CAT. NO.
5R1UA-A03
5R2UA-A06
5R3UA-A12
1RU with cover
Opt-X 250 1RU Fiber Optic Panel
2RU with cover
Fiber Components
DESCRIPTION
[A] 1RU, empty with metal cover, no lock
[B] 2RU, empty with metal cover, no lock
[C] 3RU, empty with metal cover, no lock
Opt-X 250 Fiber Panel 1.75"H x 19.0"W x 7.7"D U
DESCRIPTION
1RU, empty with no metal cover, no lock
CAT. NO.
5R1UE-A03
3RU with cover
SPECIFICATIONS AND FEATURES
Opt-X 500 Fiber Enclosure
• One-piece removable cover protects and conceals
patch cords and allows for complete accessibility
to the back of the enclosure.
• Mounting brackets allow for installation on any
rack space.
• Stores 3 meters of 900 micron tight buffered fiber
per adapter.
• Multiple bend radius and cable management
features including
2 cable tie down features in front, and 4 in back,
protect and organize cables.
Opt-X 250 Fiber Panel
• Perfect for small to medium installations with
excellent flexibility at a competitive price.
• Utilizes minimum rack space while providing
space for up to three (3) adapter plates or splice
trays (more splice trays if no obstructions).
• Two fiber management rings easily attach to low
profile mounting clips for customized positioning.
Includes multiple bend radius and cable
management features.
• Open back allows easy access and management
in all directions.
• Mounting brackets allow panel to be installed on
any rack space.
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
45
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
FIBER OPTIC CABLE ASSEMBLIES
Single-mode
Multimode
Pigtail
Fiber Components
Fiber Optic Cable Assemblies
Leviton offers an extensive line of high quality fiber optic cable assemblies,
including laser optimized versions as well as pigtails for frame and workstation. Strenuously tested for return and insertion loss, and held to strict
internal quality standards, these cable assemblies are developed to exceed
TIA 568-B.3 standards.
Choose from standard & hybrid combinations of connectors, in single-mode
and multimode, for cable assemblies and pigtails in ST, SC, FC, LC and
MT-RJ styles. Laser optimized assemblies are available in a 50µm core
style with a variety of connection configurations including combinations of
MT-RJ, ST, SC and LC connectors and provide 10-gig performance for
higher bandwidth requirements at greater distances.
We also provide custom lengths and configurations manufactured to your
exact specifications—simply call customer service for more information.
PLEASE NOTE: CUSTOM LENGTHS MAY REQUIRE A WAITING PERIOD.
All cables are OFNR* rated and meet all applicable TIA/EIA and industry
standards.
Laser Optimized
*OFNP-rated cables are available as a special order. See below.
Configure Your Catalog Number
Fiber Optic Cable Assemblies, OFNR Rated — Configure your Catalog Number by following the key below
AA B CC–D EE
(Catalog Number)
Examples: 50DSC-M05 = 50 micron Duplex SC-SC multimode connector – 5 meters
Step 1
Step 2
CORE STYLE/POLISH TYPE (AA)
Multimode Core
Code
50µm size
50
62.5µm size
62
50µm laser optimized
5L
CABLE TYPE (B)
Cable Type
Code
Simplex
S
Duplex
D
Pigtail
P
Singlemode Core
UPC polish
(ultra physical contact)
APC polish
(angle physical contact)
Note: MT-RJ is always
duplex. Simplex and
duplex cannot be
combined.
UP
AP
Step 3
CONNECTOR COMBINATIONS (CC)
Standard &
Code Hybrid
Pigtail
SC-to-ST
MT-RJ-to-MT-RJ MJ
SC-to-FC
ST-to-ST
ST
SC-to-MT-RJ
SC-to-SC
SC
ST-to-MT-RJ
FC-to-FC
FC
ST-to-FC
LC-to-LC
LC
SC-to-LC
ST-to-LC
FC-to-LC
LC-to-MT-RJ
Step 4
MODE (D)
Code Mode Type
Code
CT
Single-mode S
CF
Multimode
M
CM Note: This will depend
on selected Core
TM
Size/Polish as indicated
in Step 1.
TF
CL
TL
FL
ML
Step 5
CABLE LENGTH (EE)
Length/m
Length/ft Code
1 meter
3.3'
01
2 meters
6.6'
02
3 meters
9.8'
03
5 meters
16.4'
05
10 meters 32.8'
10
Note: Custom lengths available
upon request. Call Customer Service
at 1(800) 722-2082 for more
information.
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
46
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
FIBER OPTIC ACCESSORIES
OPT-X® Fiber Adapter Plates*
*NOTE: Not for use with LightSpace™ Enclosures.
CAT. NO.
5F100-1ST
5F100-6ZT
5F100-8ST
5F100-8ZT
5F100-6PF
5F100-6ZF
5F100-8PF
5F100-8ZF
5F100-3BC
5F100-3SC
5F100-3CA
5F100-3ZC
5F100-3AC
5F100-6BC
5F100-CSC
5F100-6AC
5F100-6ZC
5F100-6CA
5F100-6MC
5F100-12M
5F100-12P
5F100-12Z
5F100-12V
5F100-12A
5F100-24P
5F100-24Z
5F100-24A
5F100-BLK
5F100-BPP
A
B
C
D
E
F
G
Fiber Components
DESCRIPTION
[A] 6-Pack ST MM, (6-fiber) phos. bronze sleeve
6-Pack ST SM, (6-fiber) zirconia ceramic sleeve
[B] 8-Pack ST MM, (8-fiber) phos. bronze sleeve
8-Pack ST SM, (8-fiber) zirconia ceramic sleeve
6-Pack FC MM, (6-fiber) phos. bronze sleeve
6-Pack FC SM, (6-fiber) zirconia ceramic sleeve
8-Pack FC MM, (8-fiber) phos. bronze sleeve
8-Pack FC SM, (8-fiber) zirconia ceramic sleeve
[C] 3-Pack Duplex SC MM, (6-fiber) beige, phos. bronze sleeve
[D] 3-Pack Duplex SC SM, (6-fiber) blue, phos. bronze sleeve
[E] 3-Pack Duplex SC SM, (6-fiber) green, zirconia ceramic sleeve
3-Pack Duplex SC SM, (6-fiber) blue, zirconia ceramic sleeve
3-Pack Duplex SC MM Laser Optimized, (6-fiber) aqua, zirconia ceramic sleeve
[F] 6-Pack Duplex SC MM, (12-fiber) beige, phos. bronze sleeve
[G] 6-Pack Duplex SC SM, (12-fiber) blue, phos. bronze sleeve
[H] 6-Pack Duplex SC MM laser optimized, (12-fiber) aqua, zirconia ceramic sleeve
6-Pack Duplex SC SM, (12-fiber) blue, zirconia ceramic sleeve
6-Pack Duplex SC SM, (12-fiber) green, zirconia ceramic sleeve
[I] 6-Pack MT-RJ MM, (12-fiber) beige, dual polarity
[J] 12-Pack MT-RJ MM, (24-fiber) beige, dual polarity
[K] 6-Pack Duplex LC MM, (12-fiber) beige, phos. bronze sleeve
[L] 6-Pack Duplex LC SM, (12-fiber) blue, zirconia ceramic sleeve
6-Pack Duplex LC SM, (12-fiber) green, zirconia ceramic sleeve
[M] 6-Pack Duplex LC MM laser optimized, (12-fiber) aqua, zirconia ceramic sleeve
[N] 6-Pack Quad LC MM, (24-fiber) beige, phos. bronze sleeve
[O] 6-Pack Quad LC SM, (24-fiber) blue, zirconia ceramic sleeve
[P] 6-Pack Quad LC MM, (24-fiber) laser optimized aqua, zirconia ceramic sleeve
[Q] Blank, metal
Blank, plastic
H
I
J
K
L
M
N
O
P
Q
3-pack, 6-pack, 8-pack, 12-pack =
capacity of up to 3, 6, 8 or 12 connectors, respectively.
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
47
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
FIBER OPTIC ACCESSORIES
Fiber Density Chart
Styles
RACK MOUNT DENSITY
3RU Holds up to 12 Mounting Plates
Holds 1 Bulkhead w/or w/o 3 Mounting Plates
6-pack ST = up to 72 Fibers
6-pack ST = up to 18 Fibers
8-pack ST = up to 96 Fibers
8-pack ST = up to 24 Fibers
6-pack FC = up to 72 Fibers
6-pack FC = up to 18 Fibers
8-pack FC = up to 96 Fibers
8-pack FC = up to 24 Fibers
3-pack Duplex SC = up to 72 Fibers
3-pack Duplex SC = up to 18 Fibers
6-pack Duplex SC = up to 144 Fibers
6-pack Duplex SC = up to 24 Fibers
6-pack MT-RJ = up to 144 Fibers
6-pack MT-RJ = up to 36 Fibers
12-pack MT-RJ = up to 288 Fibers
12-pack MT-RJ = up to 72 Fibers
6RU Holds up to 24 Mounting Plates
2RU Holds up to 6 Mounting Plates
6-pack ST = up to 144 Fibers
6-pack ST = up to 36 Fibers
8-pack ST = up to 192 Fibers
8-pack ST = up to 48 Fibers
6-pack FC = up to 144 Fibers
6-pack FC = up to 36 Fibers
8-pack FC = up to 192 Fibers
8-pack FC = up to 48 Fibers
3-pack Duplex SC = up to 144 Fibers
3-pack Duplex SC = up to 36 Fibers
6-pack Duplex SC = up to 288 Fibers
6-pack Duplex SC = up to 72 Fibers
6-pack MT-RJ = up to 288 Fibers
6-pack MT-RJ = up to 72 Fibers
12-pack MT-RJ = up to 576 Fibers
12-pack MT-RJ = up to 144 Fibers
Fiber Components
Low Profile 1RU
Small Holds up to 2 Mounting Plates
6-pack ST = up to 12 Fibers
8-pack ST = up to 16 Fibers
6-pack FC = up to 12 Fibers
8-pack FC = up to 16 Fibers
3-pack Duplex SC = up to 12 Fibers
6-pack Duplex SC = up to 24 Fibers
6-pack MT-RJ = up to 24 Fibers
12-pack MT-RJ = up to 48 Fibers
WALL MOUNT DENSITY
Large Holds up to 12 Mounting Plates
6-pack ST = up to 72 Fibers
8-pack ST = up to 96 Fibers
6-pack FC = up to 72 Fibers
8-pack FC = up to 96 Fibers
3-pack Duplex SC = up to 72 Fibers
6-pack Duplex SC = up to 144 Fibers
6-pack MT-RJ = up to 144 Fibers
12-pack MT-RJ = up to 288 Fibers
Medium Holds up to 4 Mounting Plates
6-pack ST = up to 24 Fibers
8-pack ST = up to 32 Fibers
6-pack FC = up to 24 Fibers
8-pack FC = up to 32 Fibers
3-pack Duplex SC = up to 24 Fibers
6-pack Duplex SC = up to 48 Fibers
6-pack MT-RJ = up to 48 Fibers
12-pack MT-RJ = up to 96 Fibers
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
48
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
FIBER OPTIC ACCESSORIES
Fiber Adapters
DESCRIPTION
[A] ST® Adapter MM w/Phosphor Bronze Sleeve
[B] ST Adapter SM w/Zirconia Sleeve
[C] FC Adapter SM w/Phosphor Bronze Sleeve
[D] FC Adapter MM w/Zirconia Sleeve
[E] SC Duplex Adapter SM (blue) w/Zirconia Sleeve
SC Duplex Adapter SM (blue) w/Phosphor Bronze Sleeve
[F] SC Duplex Adapter MM (beige) w/Phosphor Bronze Sleeve
[G] SC Duplex Adapter MM aqua, zirconia ceramic sleeve
[H] SC Simplex Adapter SM blue, zirconia ceramic sleeve
[I] SC Simplex Adapter MM beige, phos. Bronze sleeve
[J] SC Simplex Adapter SM APC green, zirconia ceramic sleeve
[K] MT-RJ Adapter MM (beige)
[L] Quad LC Adapter MM (aqua)
[M] Quad LC Adapter MM (beige)
[N] Quad LC Adapter SM (blue)
[O] Duplex LC Adapter MM (beige)
[P] Duplex LC Adapter SM (blue)
[Q] LC Duplex Adapter MM aqua, zirconia ceramic sleeve
LC Simplex Adapter MM green, zirconia ceramic sleeve
CAT. NO.
49882-SAD
49882-ZAD
49883-SAD
49883-MAD
49884-SAD
49884-MAD
49884-BAD
49884-AAD
49884-SAS
49884-MAS
49884-VAS
49889-MAD
5F100-QLA
5F100-QLC
5F100-QLZ
5F100-DLC
5F100-DLZ
5F100-DLA
5F100-DLV
A-D
FIBER OPTIC FAN-OUT KIT
E-J
Fiber Optic Fan-Out Kit
DESCRIPTION
[R] 24" Fiber Optic Fan-Out Kit, 6-fiber
24" Fiber Optic Fan-Out Kit, 12-fiber
36" Fiber Optic Fan-Out Kit, 6-fiber
36" Fiber Optic Fan-Out Kit, 12-fiber
CAT. NO.
49887-06S
49887-12S
49887-06L
49887-12L
K-Q
FIBER OPTIC FAN-OUT CONSUMABLES KIT
S Leviton's Fan-Out Consumables Kit contains everything to properly terminate at least 10
Fiber Optic Fan-Out Kits, including lint-free wipes, alcohol pads, d'Gel™ packets, sealant,
and talc powder
Fiber Optic Fan-Out Consumables Kit
DESCRIPTION
[S] Fan-Out Consumables Kit
Fiber Components
R Protect your bare fiber and prepare loose-tube cable for direct termination to connectors with
these simple 6- or 12-strand kits. Available in 24" or 36" lengths. Kits separate 250 µm fibers
and route them into color-coded 900 µm buffer tubes. No proprietary tools required. Can be
used with any manufacturers loose-tube cabling, and any industry standard connectors.
CAT. NO.
49800-FAN
SPLICE TRAY KITS
Splice Tray Kits
DESCRIPTION
12-splice Splice Tray Kit
(Comes standard with Fusion/Heatshrink splice holders)
CAT. NO.
5T000-00T
R
EXTRA CABLE MANAGEMENT RINGS
Extra Cable Management Rings
DESCRIPTION
Additional Fiber Cable Management Rings (package of 2)—
Can be stacked on top of existing rings for additional
cable storage or management.
CAT. NO.
5R100-0FR
S
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
49
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
ACTIVE ZONE CABLING
Fiber Components
Telecommunications Enclosures for Active Zone Cabling
Leviton’s telecommunications enclosures add flexibility and manageability to cabling infrastructure. Active ceiling
enclosures install flush with the drop ceiling for a clean, unobtrusive look. Recessed panels in doors may be fitted with
a ceiling tile. Fully hinged, drop down doors support installed equipment and open to face the technician for safe, easy
access. Manufactured of aluminum, all ceiling enclosures are plenum rated and include two edge-protected cable
access ports with fire rated foam sealing kits.
A
2' x 2' Active Ceiling Enclosure
A Accommodates one removable assembly with total 2RU of active electronics and up to 5RU
(2U+1U+2U) of 19" rack-mount patch panels and wire management. Units are AC Power
ready and include a 9 CFM fan with transformer capable of providing more than 100 air
changes per hour. UL Listed.
2' x 2' Active Ceiling Enclosure 12.0"H x 24.0"W x 24.0"L U
DESCRIPTION
[A] Active Ceiling Enclosure, 2' x 2'
CAT. NO.
Z1000-AC2
2' x 4' Active Ceiling Enclosure
B
B
For hubs, switches and patch panels in high density areas, these enclosures house two
removable rack-mount assemblies each with 4RU (total 8RU) of mounting space for
active components and up to 10RU divided (2U+1U+2U) of 19" rack-mount patch panels
and wire management. Units are AC Power ready and include a 9 CFM fan with transformer capable of providing more than 100 air changes per hour. UL listed.
2' x 4' Active Ceiling Enclosure 12.0"H x 24.0"W x 48.0"L U
DESCRIPTION
[B] Active Ceiling Enclosure, 2' x 4'
CAT. NO.
Z1000-AC4
Accessories
Enclosure Accessories
C
DESCRIPTION
[C] Foam kit for zone ceiling enclosures
Chrome Lock Kit
Replacement Keys (2)
CAT. NO.
Z1000-FM1
Z1000-LOK
Z1000-KEY
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
50
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
PASSIVE ZONE CABLING
Telecommunications Enclosures for Passive Zone Cabling
These easy-to-install enclosures provide flexible consolidation point placement in the floor or ceiling. Manufactured
of aluminum, enclosures are plenum rated and include fire-rated foam sealing kits.
2' x 2' Passive Ceiling Enclosure
A
2' x 2' Passive Ceiling Enclosure U
DESCRIPTION
[A] Passive Ceiling Enclosure, 2' x 2'
CAT. NO.
Z1000-PC2
2' x 2' Passive Raised Floor Enclosure
Enclosureas
A For consolidation points within the ceiling, these enclosures accommodate up to 5RU
(2U+1U+2U) of 19" rack-mount patch panels and or wire management. Enclosures install
flush with the drop ceiling and recessed panels in doors may be fitted with a ceiling tile for a
clean, unobtrusive look. Fully hinged, drop down doors support installed equipment and
open to face the technician for safe, easy access. UL listed.
For consolidation points in air handling spaces under 8" deep raised floors, this enclosure holds
two 4RU (8U total) racks to accommodate any combination of standard 19" rack-mountable
patch panels or wire management. Rotating patch panel mounting locations provide easy
access to rear of patch panels for easy terminations. UL listed.
2' x 2' Passive Raised Floor Enclosure U
DESCRIPTION
Passive Raised Floor Enclosure, 8" depth
CAT. NO.
Z1000-PF2
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
51
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
WIRELESS ACCESS POINT ENCLOSURES
A
Wireless Access Point Enclosures
WIRELESS ACCESS POINT CEILING ENCLOSURES, 10" AND 5"
Enclosures
A-B Mount these enclosures into standard 2' x 2' ceiling tiles for a clean look and easy
access. Each unit is designed to house a variety of wireless access points. Single edgeprotected access port includes a fire-rated foam sealing kit, making it suitable for air
handling spaces. Doors are fully hinged and lockable. The enclosure is painted white to
blend with ceiling tiles. Multiple door faceplates, including a blank one, are sold
separately to accommodate a variety of wireless equipment. UL listed.
WIRELESS ACCESS POINT CEILING ENCLOSURE, 4" DEEP
C
B
This ceiling mount enclosure accommodates one wireless access point or bridge. The
removable door mounted bracket supports equipment up to 101/2" wide by 51/2" deep by
17/8" high. Fully hinged door is is lockable for security and is stamped with two obround
holes centered 5" apart allowing antennas to extend below the drop ceiling. UL listed.
Wireless Access Point Ceiling Enclosures U
DESCRIPTION
[A] Wireless Access Point Ceiling Enclosure, 10" Depth, w/o Faceplate
[B] Wireless Access Point Ceiling Enclosure, 5” Depth, w/o Faceplate
[C] Wireless Access Point Ceiling Enclosure, 4" Depth
C
CAT. NO.
W1000-WCE
W1000-WC5
W1000-WC0
Faceplates
Wireless Access Point Ceiling Enclosure Faceplates
D
DESCRIPTION
Blank Faceplate (Fits 10" Wireless Access Point Enclosure)
Faceplate for Cisco Aironet™ 350 (Fits 5" and 10" Wireless Access Point Enclosure)
Faceplate for Cisco Aironet 1100 (Fits 5" and 10" Wireless Access Point Enclosure)
Faceplate for Cisco Aironet 1200 (Fits 5" and 10" Wireless Access Point Enclosure)
[D] Faceplate for Leviton AP200 Wireless Access Point w/mounting bracket
CAT. NO.
W1000-F01
W1000-F02
W1000-F03
W1000-F04
W1000-WC5
WIRELESS ACCESS POINT WALL-MOUNT ENCLOSURE
E
Constructed of rugged steel with a lock assembly these enclosures are perfect for areas
where there is limited floor or ceiling space and a need for security. Inside space
accommodates a Cisco® Aironet® 350 or equivalent equipment sized 9" wide by 61/2"
high by 23/4" deep. UL listed.
Wireless Access Point Wall-Mount Enclosure U
E
DESCRIPTION
[E] Wireless Access Point Wall-Mount Enclosure
CAT. NO.
W1000-WW0
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
52
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
®
VERSI-DUCT CABLE MANAGEMENT SYSTEM
A
B
E
C
F
G
H
D
I
M
N
K
O
J
Q
P
Leviton’s unique Versi-Duct Slotted Duct System provides a versatile simple solution for fiber
and copper cable organization and management. The horizontal duct is available in both one
rack (1RU-1.75") or two-rack (2RU-3.5") unit sizes to accommodate both small and large
cable systems. Vertical slotted ducts comes in a 35" half or 80" full rack height version. Both
the horizontal and vertical slotted ducts come in Front Only or Front & Back configurations
with cable-concealing covers and an assortment of accessories. Versi-Duct is the ideal system
for efficient, adaptable rack and frame cable management.
Versi-Duct Slotted Duct Cable Management Systems
DESCRIPTION
[A] Vertical Front & Rear Duct, 80" high
[B] Vertical Front-only Duct, 80" high
[C] Vertical Front & Rear Duct, 35" high
[D] Vertical Front-only Duct, 35" high
[E] Horizontal Front & Rear Duct, 2RU
[F] Horizontal Front & Rear Duct, 1RU
[G] Horizontal Front-only Duct, 2RU
[H] Horizontal Front-only Duct, 1RU
[I] Vertical Channel Divider
[J] Slack Loop Storage Organizer, extended (2")
[K] Bend-radius Compliant Funnel, rear only
[L] Duct Cover Hinge, 4 per package
[M] Extended Cover, Front-only 2RU
[N] Extended Cover, Front-only 1RU
[O] Slack Loop Storage Organizer
[P] Cable Retainer
[Q] Mounting Bracket, 2 per package
CAT. NO.
4980L-VFR
4980L-VFO
4935L-VFR
4935L-VFO
492RU-HFR
491RU-HFR
492RU-HFO
491RU-HFO
49265-DV1
49265-SL2
49265-FN4
49265-HNG
49265-EX3
49265-EX1
49265-SL1
49265-WR1
49265-BRK
FEATURES
Versi-Duct
• Versatile accessories solve a variety
of cable management challenges
• Suitable for copper and fiber
applications
• Slack loop control feature
• Helps maintain proper cable
bend radii
• Offered in Front & Back and Front
Only versions (for both vertical and
horizontal ducts)
• Horizontal Duct offered in 1RU
(1.75") and 2RU (3.50") sizes
Cable Management
Versi-Duct Slotted Duct Cable Management System
L
• Horizontal Duct offered in 35" and
80" lengths
• Cable concealing covers with
optional hinges
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
53
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
RACK AND FRAME CABLE MANAGEMENT
A
Horizontal Cable Management
Create a first class cabling infrastructure and reduce network administration time using Leviton's
Horizontal Cable Management System. Options include cable management bars, patch cord
organizers, slack organizers, and the patent-pending Front Hinge Bracket.
Cable Management Bars
B
DESCRIPTION
HEIGHT
[A] Rear Cable Manager for Active Equipment
2RU
RINGS
CAT NO.
41188-SM2
[B] Extended Cable Management Bar
49005-EMB
[C] Cable Management Bar
49005-CMB
[D] High Density Cable Management Bar
49005-DMB
Horizontal Patch Cord Organizers
C
DESCRIPTION
HEIGHT
RINGS
CAT NO.
[E]
Horizontal Patch Cord Organizer
2RU
2"
49253-2CM
Horizontal Patch Cord Organizer
2RU
4"
49253-BCM
Horizontal Patch Cord Organizer
1RU
4"
49253-LPM
Horizontal Patch Cord Organizer
4RU
5"
49253-4CM
Horizontal Patch Cord Organizer
4RU
7"
49253-6CM
Horizontal Patch Cord Organizer (Angled)
1RU
2"
4W254-LPM
Horizontal Patch Cord Organizer (Angled)
2RU
2"
4W254-BCM
[F]
Cable Management
D
E
Horizontal Patch Cord Organizer (w/ metal cover)
1RU
4"
4925C-LPM
[G] Horizontal Patch Cord Organizer (w/ metal cover)
2RU
4"
4925C-BCM
Horizontal Patch Cord Organizer (w/ metal cover)
4RU
5"
4925C-4CM
Horizontal Patch Cord Organizer (w/ metal cover)
4RU
7"
4925C-6CM
DESCRIPTION
HEIGHT
RINGS
CAT NO.
[H] Front Hinge Bracket
3RU
Front Hinge Bracket
49400-FHB
F
G
G
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
54
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
RACK AND FRAME CABLE MANAGEMENT
Rack Cable Management and Accessories
A
CORD ORGANIZERS
Two-Position Cord Organizer combines horizontal and vertical distribution rings with individual
routing clips for patch cord organization between patch panels. One-Position Cord Organizer is
1RU with vertical distribution rings and individual routing clips.
B
Cord Organizers
DESCRIPTION
[A] Two-Position Organizer Panel (19" wide, 2RU)
[B] One-Position Organizer Panel (19" wide, 1RU)
CAT. NO.
49252-PO2
49252-PO1
C
COMBO FRONT/REAR MANAGEMENT
Manage front and rear cables/cords in a 2RU standard rack space. Oversized front rings meet
larger-capacity requirements for patch cords. Rear management maintains bend radius of
cables routed from vertical channels. Retention rings and fixed anchor points for ‘loose-fit’ or
tie-wrapped bundles.
Combo Front/Rear Management
D
DESCRIPTION
[C] Combo Front/Rear Manager (19" wide, 2RU)
CAT. NO.
49252-PCM
RECLOSEABLE CABLE BARS
Manage cable vertically and horizontally on relay racks and cabinets. 19" metal-clad horizontal
bar with attached loops (Hook and Loop-Style) screws into rack to manage cables horizontally.
E
DESCRIPTION
[D] Metal Clad Horizontal Bar (for 19" Racks, 1RU)
Cable Management
Recloseable Cable Bars
CAT. NO. 3RU
41150-019
THE WRAP BAR
Mounts to the rear of standard TIA/EIA racks to support cable bundles and help maintain bend
radius near cable terminations. Fixed anchor points for ‘loose-fit’ tie wrapped cables.
F
The Wrap Bar
DESCRIPTION
[E] Tie Wrap Bar (19" wide, 1.0" high, 1.5" deep)
CAT. NO.
49258-TWB
SPACEMAKER CABLE MANAGER
Mounts to front or rear of standard TIA/EIA racks to support cable bundles and help maintain bend
radius. Allows retrofit of current configurations without the need to move existing patch panels.
Using existing panel screws, simply loosen screws, slide in SpaceMaker, and re-tighten screws.
G
Spacemaker Cable Manager
I
DESCRIPTION
[F] SpaceMaker Cable Manager (19" wide, 1RU, 2RU, 3RU)
CAT. NO.
41188-SM1
H
VERTICAL MANAGEMENT COMPONENTS
Flexible front and rear vertical management. "Open-ring" system can be changed as needed for
total customization and on-site adaptability. An optional tie bracket and divider panel can be added
to provide cord and cable separation between racks.
Vertical Management Components
DESCRIPTION
[G] 3" Vertical Manager Ring (4-pair cable capacity: 180 rear, 250 front)
[H] 6" Vertical Manager Ring (4-pair cable capacity: 360 rear, 500 front)
[I] Tie Bracket to secure vertical manager ring to adjacent rack
CAT. NO.
49260-MR3
49260-MR6
49261-BKT
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
55
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
RACK AND FRAME CABLE MANAGEMENT
Angled Panel Cable Management
A
Angled panels and accessories provide improved access to 110 punch down fields and allow
the option to increase rack density. Angled Cable Management Accessories, suitable for
Category 5e, 6, or 10G Angled Patch Panels, provide enhanced cable management and organization via the Angled Cable Management Bar, Vertical Transition Rings, 1RU and 2RU Angled
Blank Panel Inserts, and Transitional Covers. Recessed Angled and Angled styles available.
RECLOSABLE TIE-WRAPS
B
A Hook & Loop tie-wrap that easily reopens for moves, adds and changes, this general
purpose Hook & Loop strap is available in 5", 8" and 12" lengths 1/2" wide.
C
Recessed Angled Panel Cable Management Accessories
D
DESCRIPTION
CAT. NO.
[A] Recessed Angled Horizontal Patch Cord Organizer, 1RU
4W254-LPM
Recessed Angled Horizontal Patch Cord Organizer, 2RU
4W254-BCM
1RU Recessed Angled Blank Panel Inserts
4W254-BA1
[B] 2RU Recessed Angled Blank Panel Inserts
4W254-BA2
[C] Recessed Angled Cable Management Bar, rear
(4 hook and loop fasteners included)
4W006-AMB
[D] Recessed Angled Transitional Cover
4W254-BC1
Vertical Transition Rings (Horizontal Cable Ring), 2/box
Cable Management
E
Angled Panel Cable Management Accessories
F
G
49262-HR1
DESCRIPTION
Angled Horizontal Patch Cord Organizer, 1RU
Angled Horizontal Patch Cord Organizer, 2RU
[E] 1RU Angled Blank Panel Inserts
[F] 2RU Angled Blank Panel Inserts
[G] Angled Cable Management Bar, rear (4 hook and loop fasteners included)
[H] Angled Transitional Cover
Vertical Transition Ring (Horizontal Cable Ring), 2/box
CAT. NO.
49254-LPM
49254-BCM
49254-BA1
49254-BA2
49006-AMB
49254-BC1
49262-HR1
H
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
56
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
RACK AND FRAME CABLE MANAGEMENT
Rack Cable Management and Accessories
A
RACK AND PANEL ACCESSORIES
The Hinged Wall-Mount Bracket is designed for use in installations where space is constrained
or racks are not used. Available in 2RU, 3RU, and 4RU sizes.
Blank Panels provide a seamless look until additional rack space is needed for future expansion.
Rack and Panel Accessories
DESCRIPTION
[A] Hinged Wall-Mount Bracket, 2RU
Hinged Wall-Mount Bracket, 3RU
Hinged Wall-Mount Bracket, 4RU
[B] Front Blank Panel, Standard, 4RU
[C] Front Blank Panel, Standard, 2RU
[D] Front Blank Panel, Standard, 1RU
CAT. NO.
49251-W62
49251-W63
49251-W64
49254-BP4
49254-BP2
49254-BP1
110 CHANNELMAX® SYSTEM
Route and manage cables and cross connect wires in 110-style installations with the 110
ChannelMax System. 3" and 5" Cable Channels, provide two to three times the space of typical
110 blocks with legs, and the non-proprietary design works with all standard 110 blocks.
Vertical Spool Managers and Horizontal Cable Management Troughs organize and support
cables while allowing easy access for re-configuration. Vertical Spool Manager works with Wire
Distribution Spools, PN 40054-DSS, sold separately.
B-D
E-H
110 ChannelMax® System
CAT. NO.
41CMS-HCM
41CMS-VSM
41CMS-500
41CMS-300
40054-DSS
Cable Management
DESCRIPTION
[E] Horizontal Cable Management Trough
[F] Vertical Spool Manager Mounting Bracket
[G] 5" Deep Vertical Cable Channel
[H] 3" Deep Vertical Cable Channel
Wire Management Spools
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
57
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
HOOK AND LOOP CABLE MANAGEMENT
General Purpose Hook and Loop Cable Management
A, B
Whatever your cable management needs, Leviton has a Hook and Loop product to keep your
cable under wraps. These innovative solutions are perfect for the messy cables that accumulate
around the workstation.
Recloseable Saddle Ties
C
DESCRIPTION
CAT NO.
[A] Recloseable Saddle Tie with 10/32 metal rack screw (10 per pack)
41020-SPR
[B] Recloseable Saddle Tie with #8 wood screw (10 per pack)
41010-SPW
Recloseable Compression Strap
DESCRIPTION
CAT NO.
[C] Recloseable Compression Strap
45224-RCS
Recloseable “J” Hook
D
G, H, I
DESCRIPTION
CAT NO.
[D] Recloseable “J” Hook
46700-SLG
Cable Management
Bulk Hook and Loop Wrap
DESCRIPTION
CAT NO.
[E]
Bulk Hook and Loop Wrap, 75 Foot Roll
43115-075
[F]
Bulk Hook and Loop Wrap, 15 Foot Roll
43115-015
Recloseable Tie-Wraps
E
DESCRIPTION
CAT NO.
[G] Tie Wrap, 5" Length (25 per pack)
43105-005
[H] Tie Wrap, 8" Length (25 per pack)
43108-008
[I]
43112-012
Tie Wrap, 12" Length (25 per pack)
Hook and Loop Workstation Cable Management
DESCRIPTION
CAT NO.
[J]
41225-SAP
Individual Loops with Peel-off Adhesive (25 per pack)
Recloseable Fastener
J
DESCRIPTION
CAT NO.
[K] Recloseable Fasteners (orange) (10 per pack)
41030-OFT
Recloseable Storage Rings
DESCRIPTION
CAT NO.
[L]
Recloseable Storage Ring, Inside Plant (11.75" diameter)
48900-IFR
Recloseable Storage Ring, Outside Plant (24" diameter)
48900-0FR
K
L
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
58
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
™
LABELWARE SYSTEMS
LableWare
A
LabelWare is the perfect tool to create TIA/EIA-606-A compliant labels for cabling infrastructure
components. Laser print surface on pre-cut, perforated 8.5" x 11" sheets provides simple application with permanent legibility. User-friendly software includes label templates designed specifically for Leviton patch panels, patch cords, 110 wiring products and wallplates. The context
sensitive Help Module includes step-by-step instructions to easily create and customize complex
label builds in minutes. The Build Editor allows integration of fonts and symbols from your word
processing software. Download LabelWare software at www.levitonvoicedata.com/labelware.
Cable and Wallplate Product Labels
DESCRIPTION
[A] Cable Wrap-around Labels (8mm), 48 self-adhesive labels per sheet
[B] Wallplate & Housing Labels, 10 sheets, 80 card-stock labels per sheet (white)
[C] Port Labels, 10 sheets, 324 self-adhesive labels per sheet (clear)
CAT. NO.
59260-00W
59259-C0W
59259-ACL
B
Patch Panel and 110 Wiring Product Labels
DESCRIPTION
[D] 110 Wiring Product Labels,
10 sheets, 16 labels/sheet
[E] Patch Panel and Block Labels
10 sheets, 40 labels/sheet
[F] QuickPort Patch Panel
and Block Labels,
10 sheets, 40 labels/sheet
CAT. NO.
WHITE
59258-00W
CAT. NO.
PUR/YEL
59258-0PY
CAT. NO.
BLU/GRY
59258-0LG
CAT. NO.
RED/ORG
59258-0RO
CAT. NO.
GRE/BRN
59258-0VB
59256-00W
59256-0PY
59256-0LG
59256-0RO
59256-0VB
59257-00W
59257-0PY
59257-0LG
59257-0RO
59257-0VB
C
TERMINATION TYPE
Demarcation Point
Network Connections
Common Equipment
1st Level Backbone
2nd Level Backbone
Horizontal Cabling
Campus Backbone
Auxiliary Circuits
Key Circuits
Orange
Green
TYPICAL APPLICATION
Central office connection
User side of central office connection
Connections to PBX, mainframe, LAN, multiplexer
Terminations of building backbone cable MCs to ICs
Terminations of building backbone cable ICs to HCs
Terminations of horizontal cable in TEs
Termination of backbone cable between buildings
Alarms, security, or energy management
Connections to key telephone systems
Purple
White
Gray
Blue
Brown
COLOR
Orange
Green
Purple
White
Gray
Blue
Brown
Yellow
Red
Yellow
D
Labeling Products
TIA/EIA-606-A Color Code Chart
Red
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
59
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
LABELING ACCESSORIES
A
QuickPort® Shutters and Icons
Leviton’s field-installable QuickPort Shutters protect connectors from dust and debris with a
unique, one-piece hinged door. Suitable for commercial and residential applications.
Shutters feature labels and recessed windows and fit on Leviton Category 6, 5e, 5, and 3
and 8-Position Voice Grade connectors, when used in a QuickPort wallplate or housing.
Optional label kits are available. NOTE: SHUTTERS DO NOT WORK WITH CONNECTOR
INTERFACE BEZELS.
QuickPort Shutters and Icons
B
DESCRIPTION
[A] QuickPort Shutter Kit w/Leviton logo and miscellaneous icons
Accessory Kit w/pre-printed icons on white paper
[B] Color Label Kit w/pre-printed icons on colored paper*
CAT. NO.
51084-ICN
51084-XLB
51084-CLB
Patch Panel and Port Accessories
Patch Panel Port Identification Kits
DESCRIPTION
[C] QuickPort 32-port ID kit (for 24- and 32-port panels)
[C] QuickPort High Density ID kit (for 24- and 48-port high density panels)
CAT. NO.
49257-QID
49257-QHD
PRE-PRINTED PORT DESIGNATION LABELS
[D] Identify ports on any QuickPort Housings with these attractive and versatile jack designation
Labeling Products
labels. Printed on clear self-adhesive backing. Commercial or residential labels available.
Port Designation Labels
DESCRIPTION
C
D
Commercial Labels—10 sheets per kit, 94 labels per sheet
Residential Labels—10 sheets per kit, 94 labels per sheet
CAT. NO.
BLACK INK
41080-LEB
40740-0BE
CAT. NO.
WHITE INK
41080-LWB
—
110 Product Labeling Holders and Strips
E Identify all your 110 ports quickly and easily with these label holders and slide-in label strips.
The clear plastic holders attach to all types of 110 wiring bases including wall, rack and wallmounting frame styles. Labeling strips are lined for 2-, 3-, 4- or 5-pair spacing and available
in white for Cat 6 110 Wiring Products. Cat 5e labeling strips are available in your choice of
nine colors.
110 Product Labeling Holders and Strips
41080-LEB Shown
E
DESCRIPTION
[E] Clear Label Holders (bag of 6)
[E] CAT 6 Label Strips lined for 4-pair spacing (bag of 6)
(available in white only)
[E] CAT 5e Label Strips lined for 2-, 3-, 4- or 5-pair spacing (bag of 6)
(available in one of 9 colors)
CAT. NO.
41100-HLD
41LBL-60W
41LBL-00*
*COLOR/LABELS
QuickPort Shutter Kit
For color selection, add suffix to catalog
number as follows: Gray (G), Orange (O),
Blue (L), Yellow (Y), Green (V), Purple (P),
Brown (B), Red (R).
110 Product Labels
For color selection, add suffix to catalog
number as follows: White (W), Gray (G),
Orange (O), Blue (L), Yellow (Y), Green (V),
Purple (P), Brown (B), Red (R).
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
60
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TOOLS and ACCESSORIES
110 Punchdown Tool
A
WIRE PUNCHDOWN/TERMINATION TOOL
A
A versatile punchdown/termination tool with changeable blades (sold separately) that
enables installers to make reliable connections on a variety of wire termination blocks.
Terminate/punch down wire with one simple push on the handle. An adjustable impact
setting allows you to terminate wire with less effort than other impact tools. Handle can
be fitted with several interchangeable custom blades to cover many termination types:
110 IDC, 66 IDC, Krone, BIX (Northern Telecom BIX system), and an awl (woodscrew
starter punch). A spare blade can be kept in a storage chamber in the handle.
B–E These special application blades are for use with the Wire Punchdown Tool for terminating
22, 24 or 26 gauge wire. Krone and BIX blades feature scissor-action trim
D814 Wire Puchdown/Termination Tool and D814 Tool Blades
DESCRIPTION
[A] Wire Punchdown/Termination Tool (Blade Sold Separately)
[B] 110 IDC Blade
[C] 66-IDC Blade
[D] BIX® Blade
[E] Krone® Blade
AWL (Woodscrew starter punch)
CAT. NO.
49553-814
49553-110
49553-066
49553-BIX
49553-KRN
49553-AWL
B
C
D
E
F
MULTI-PAIR TERMINATION TOOL
Multi-Pair Termination Tools and Accessories
DESCRIPTION
[F] Mass Termination Multi-Pair Tool Handle with CAT 6, 4-Pair Head
Mass Termination Replacement Head, CAT 6, 4-Pair
Mass Termination Replacement Head, CAT 5e, 5-Pair
CAT. NO.
49553-TTH
49553-64H
49553-55H
H
MASTER COMPRESSION TOOL
G The Multi-pair Termination Tool is designed for use with Leviton’s Category 6 110-style
wiring products. The high-impact, spring-loaded handle, makes it easy to terminate
multiple pairs with just one punch. Use “Blade In” and “Blade Out” options for daisy chain
or full termination. Category 5e and 6 heads are available separately. Handle works with
both Category 5e and 6 heads.
Tools and Accessories
F The Multi-pair Termination Tool is designed for use with Leviton’s Category 6 110-style
wiring products. The high-impact, spring-loaded handle, makes it easy to terminate
multiple pairs with just one punch. Use “Blade In” and “Blade Out” options for daisy chain
or full termination. Category 5e and 6 heads are available separately. Handle works with
both Category 5e and 6 heads.
Master CompressionTool
DESCRIPTION
[G] Master Compression Tool
CAT. NO.
40989-CPT
Compression Connectors are sold on page L4.
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
61
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
FIBER OPTIC TOOLS
A
Opt-X Fiber Tool Kits
OPT-X LIGHT TOOL KIT
A All the essential tools for quick field-termination of fiber optic connectors. Includes 100X
inspection scope, scribe, polishing fixture, polishing pad, 900µm buffer remover tool, jacket
stripper, Thread-Lock® tightening tool, and scissors.
OPT-X PRO TOOL KIT
B
B Use with any SC, ST, or FC Thread-Lock connectors. Includes Thread-Lock Versa-Cleave®
Tool, 200X inspection scope, Thread-Lock tightening tool, one 250Ìm and one 900Ìm
buffer remover, polishing pad, safety glasses, scissors, jacket stripper, polishing fixture, and
music wire.
OPT-X FAST-CURE TOOL KIT
C Use with single-mode or multimode Fast-Cure adhesive connectors - SC, ST, FC, or LC.
Includes 200X inspection scope, one 250Ìm and one 900Ìm buffer remover, polishing pad,
standard 2.5mm and LC 1.25mm polishing fixtures, LC scope adapter, fiber crimp tool,
safety glasses, scissors, jacket stripper, music wire and lapping film. Adhesive/Accelerator
Kit sold separately on page K5.
OPT-X MT-RJ ACCESSORY KIT
C
Adds MT-RJ capability to existing tool kits.
Tools and Accessories
Fiber Optic Tool Kits
DESCRIPTION
[A] Opt-X Light Tool Kit
[B] Opt-X Pro Tool Kit (includes Versa-Cleave)
[C] Opt-X Fast-Cure Tool Kit
Opt-X MT-RJ Accessory Kit
CAT. NO.
49800-MTK
49800-UTP
49800-FTK
49800-SLA
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
62
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
FIBER OPTIC TOOLS and CONSUMABLES
Fiber Optic Tools and Consumables Sold Individually
A
Individual Components
CAT. NO.
49886-BR2
49886-BR9
49886-STP
49886-SIS
49886-SMP
49886-GLS
49886-SCR
49886-PUC
49886-PAD
49886-CSE
B
C
D
E
F
49886-CTT
49883-FCT
49800-SMK
49800-MMK
49886-SLG
49886-FIT
49886-SLC
49886-VWA
49886-VFA
49886-OTT
49886-CST
49886-CSA
G
H
I
49886-FCT
49886-LCS
49886-LCP
49886-FCC
49886-WRE
49886-DWP
49886-APD
49886-12F
49886-03F
49886-X3F
49886-FCN
49886-SYR
J
Tools and Accessories
DESCRIPTION
Universal Tools
[A] 250 µm Buffer Remover
[B] 900 µm Buffer Remover
[C] Jacket Stripper
[D] Aramid Strand Scissors
Marking Pen
Safety Glasses
Sapphire Scribe
2.5mm Polishing Puck
3" x 6" Polishing Pad
Opt-X® Tool Kit Carrying Case
Tightening Tools
[E] ST/SC Combination Tightening Tool
[F] FC Tightening Tool
FastCAM Installation Kits
[G] Multi/Single-Mode Installation Kit
[H] Multimode Installation Kit
MT-RJ Specific Tools
Strip Length Gauge
Frame-Station Connector Assembly Tool
Workstation Connector Lead-in Crimp Tool
Versa-Cleave® Adapter for MT-RJ Workstation Connectors
Versa-Cleave Adapter for MT-RJ Frame-Station Connectors
Opt-X 20/20 Lenses
MT-RJ Tool Kit Carrying Case
MT-RJ Accessory Kit Carrying Case
Fast-Cure Specific Tools
[G] Fiber Optic Crimp Tool with .128, .151, .178 hex die
LC Scope Adapter
1.25mm (LC) Polishing Puck
Fast-Cure Tool Kit Carrying Case
Consumables
Music Wire
Lint Free Dry Wipes 100/pack
Alcohol Pads 100/pack
12 µm Aluminum Oxide Lapping Film, 100/pack
3 µm Aluminum Oxide Lapping Film, 100/pack
0.3 µm Aluminum Oxide Lapping Film, 100/pack
Replacement Needles 25/pack
Replacement Syringes 25/pack
K
CONSUMABLES KITS
H-J Leviton’s Consumables Kits contain everything you need to clean and polish connectors,
such as polyester wipes, alcohol pads, music wire, and 12-, 3- and 0.3 µm lapping film.
Fast-Cure kit adds needles and syringes, plus adhesive and accelerator. Adhesive/
Accelerator kit is also sold separately. Fan-Out Consumables Kits are also available.
Consumables Kits
DESCRIPTION
[H] Universal Consumables Kit
[I] Fast-Cure Consumables Kit
[J] Adhesive/Accelerator Kit
Fan-Out Consumables Kit (shown on page L51)
CAT. NO.
49800-CON
49800-FAC
49800-680
49800-FAN
L
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
63
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
FIBER OPTIC TOOLS and CONSUMABLES
A, B, C
Fiber Optic Tools
THREAD-LOCK® VERSA-CLEAVE® TOOL
A–C Diamond blade cleaves fiber perfectly every time, eliminating the need for a craft-sensitive
scribe procedure. The ergonomic stop-watch design fits comfortably in the hand, works
with any style or brand of mechanical 2.5mm ferrule connector, and cleaves with a simple
push of the button. The integrated debris cup catches and retains fiber debris for safe
disposal. Versa-Cleave can be ordered separately, or as part of the Opt-X® Pro Tool Kit
Thread-Lock Versa-Cleave
D
DESCRIPTION
[A] Versa-Cleave Tool
[B] Versa-Cleave Adapter for MT-RJ Workstation Connector
[C] Versa-Cleave Adapter for MT-RJ Frame-Station Connector
CAT. NO.
49886-TVC
49886-VWA
49886-VFA
SAFETY PAD
D
Provides a flexible, shatterproof, non-slip surface perfect for terminating all Leviton Fiber
Optic Connectors.
Safety Pad
DESCRIPTION
[D] Safety Pad
Tools and Accessories
E
CAT. NO.
49886-SPD
INSPECTION SCOPES
E, F Leviton’s 100x and 200x Inspection Scopes allow techs to view multimode and
singlemode end-face polishes safely, and reduce the chances of over-polishing (a sideeffect of many coaxial inspection scopes). 200x Scope features oblique viewing
technology, ergonomic grip, 200X magnification and full laser eye protection through
wavelengths of 850-1550 nanometer. Both scopes feature rugged construction that
stands up to jobsite abuse.
Inspection Scopes
F
DESCRIPTION
[E] 100x Inspection Scope
[F] 200x Inspection Scope
CAT. NO.
49886-SCP
49886-FSP
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
64
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TOOLS and ACCESSORIES
Tone Test Set
A
A Use the Leviton Tone Test Set in low voltage wire applications to test for continuity, check for
shorts or opens, and provide talk battery for a communication line on a vacant pair. Connect
toner across a wire pair and set to transmit either a continuous 1000 Hz or alternating
500/1000 Hz tone. Use with the Speaker Probe (below) to trace pairs and locate broken
pairs/cables in walls.
Also identifies Tip and Ring polarity, and line condition for CLEAR LINE with dial tone,
BUSY LINE and RINGING LINE. Features “O” ring seals on the case, test leads for water
resistance, support leash, tri-color, and nylon-braided tinsel wire test leads. Telco-standard,
6A-type alligator clips with piercing pins securely grip 66-clips, screw heads, screw bodies,
and wire-wrapped or threaded terminals. A 6-position, 2-conductor plug lead is also
provided for connection to modular jacks.
B
Inductive Speaker Probe
B The streamlined inductive speaker probe detects audible frequency tones quickly for accurate tracing and identification of wires, cables, and metallic circuits. Use with the tone test set
(above) to trace and isolate pairs in virtually any type of wire application, without damage to
the insulation. Identifies single wires or individual pairs in multiple-pair cables at terminals or
closures; identifies station wiring or cables to specific equipment in closets or on distribution
frames; and identifies the ends of drop wires. Probe can also be used to locate prewiring, or
opens in wires, after wall covering is installed. Features both needlepoint and duckbill tips and
a non-locking slide switch.
C
DESCRIPTION
[A] Tone Test Set (includes 9 volt battery)
[B] Inductive Speaker Probe only (includes 9 volt battery;
one duckbill tip; and one needlepoint tip)
[C] Leather Belt Holster for Tone Test Set
[D] Leather Belt Holster for inductive speaker probe
Spare duckbill and needlepoint tip set
Kit containing tone test set with belt holster, and inductive
speaker probe with belt holster
Kit containing 5 tone test sets with belt holsters, and 5 inductive
speaker probes with belt holsters
D
CAT. NO.
49560-TTS
49561-SSP
49560-LCC
49561-LCC
49561-TIP
49562-TSK
Optional leather belt holsters.
49562-KIT
Crimping Tool for Coaxial Connectors
E
E For use in crimping coaxial connectors onto RG-59 or RG-6 cables. Rugged metal construction
with cushioned handles. Carded package for display in merchandising racks.
Tools and Accessories
Tone Test Set, Inductive Speaker Probe — Individual Items and Combinations
Crimping Tool for Coaxial Connectors
DESCRIPTION
[E] Crimping Tool for Coaxial Connectors
CAT. NO.
40988-000
UTP Stripping Tool
F
F Use this versatile tool to strip unshielded twisted pair (UTP) cable. Carded package for display
in merchandising racks.
UTP Stripping Tool
DESCRIPTION
[F] Stripping Tool
CAT. NO.
49660-00C
L
For answers to technical questions, call Leviton’s Techline at 1-800-722-2082
65
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TOOLS and ACCESSORIES
Craftsperson’s Handset
A
A This handset is used by installers, repair technicians, and other authorized personnel for
basic line testing and essential on-site temporary communications. Line-powered to provide
either DTMF (Touch Tone) or dial pulse output. Features all standard ‘buttset’ line tests,
including polarity check, line monitoring, and signaling.
Craftsperson’s Handset
DESCRIPTION
[A] Craftsperson’s Handset
CAT. NO.
49575-CTS
Termination Tool (66-BT)
B
B This ‘pocket friendly’ tool quickly punches down 20 through 26 gauge unstripped wire in
devices using 66-clip terminals. It adjusts to accommodate variation in wire size and blade
sharpness. Replaceable blades reverse to let you terminate and cut wire in a single stroke, or
terminate without.
C
D
Replacement Stem for Termination Tool (66-BT02)
C The replaceable stem for the termination tool blade.
Replacement Blade for Termination Tool (66-BT01)
Tools and Accessories
D This blade reverses so wires can be terminated and cut, or terminated without cutting. It also
adjusts to accommodate variation in wire size or blade sharpness.
Termination Tool, Replacement Stem and Replacement Blade
DESCRIPTION
[B] Termination Tool (66-BT)
[C] Replacement Stem for Termination Tool (66-BT02)
[D] Replacement Blade for termination Tool (66-BT01)
CAT. NO.
46666-0BT
46666-BTS
46666-BTB
Note: Numbers in parentheses refer to industry product designation.
E
Modular Plug Breakout Adapter
E For testing any 6- or 8-position modular jack with the Tone Test Set or Craftsperson’s Handset.
Includes contacts to connect, via alligator clip leads, to any test apparatus or Lineman’s Test
Set. Can be used in series with any cable with a 6- or 8-conductor modular plug.
Modular Plug Breakout Adapter
DESCRIPTION
[E] Modular Plug Breakout Adapter
CAT. NO.
40070-MDP
L
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
66
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement