MX-406 PRELIMINARY PRODUCT INFORMATION SIX CHANNEL STEREO MICROPHONE MIXER

MX-406 PRELIMINARY PRODUCT INFORMATION SIX CHANNEL STEREO MICROPHONE MIXER
PRELIMINARY PRODUCT INFORMATION
MX-406
SIX CHANNEL STEREO MICROPHONE MIXER
The MX-406 is a rack-mountable six-channel, stereo
microphone/line mixer, designed to be used in fixed
or portable installations, by itself, or as a supplement
to larger mixing consoles. Typical applications
include live sound reinforcement, broadcast, recording, and film/video production.
It features ultra low-noise studio-grade mic preamps
with switchable 20dB pads, up to 60dB of mic
preamp gain, concentric level and pan controls, individual high and low EQ, an aux input on each channel, a continuously variable gain trim to handle
microphones with different input sensitivities, switchable 48 Volt phantom power for use with condenser
mics, a signal present and peak LED indicator, and a
6 segment LED output level meter. A separate Aux In
control adjusts line level sources, such as a CD player
or tape deck. Plenty of headroom has been designed
into the MX-406 so even the hottest signals can be
handled without distortion.
FEATURES:
• Six Balanced 1/4”/XLR Inputs
• Low-Noise Mic Preamp Circuitry
• High Gain (84dB Channel Input to Program Output)
Ensures Full Output with Low Level or Distant Mics
• Two-Band EQ Each Channel
• Pan Control on Each Channel
• Signal Present and Clip LED’s Each Channel
• Six-Step LED Output Level Metering
• Six Channel Inserts
• Aux Input, Send and Return
• Balanced Stereo Outputs
• Balanced XLR and 1/4” Mono Output
• Stereo Headphone Jack with Level Control
• Auxillary Tape/CD Inputs and Outputs
• Three Position Input Gain Switch
• 20dB Pad Switch
• +48V Phantom Power for Condenser Mics
• UL Listed
The XLR or 1/4” balanced mono output is capable of
driving +22dBu into 600 ohms, and the separate TRS SPECIFICATIONS:
Input Impedance: 20K ohm balanced, 10K ohm unbalanced
1/4” stereo outputs may be used either balanced or
Max Input Level:
+23dBu
Impedance: 200 Ohm pseudo balanced, 100 Ohm unbalanced
unbalanced. The MX-406 also offers an RCA-jack out- Output
Max Output Level: +22dBu
put, and its Pre-Master In and Out connections allow Nominal Gain:
0dB +/- 0.5dB
Response: 20 Hz-20 KHz, +0/-0.5 dB
for linking multiple mixers, such as the Ashly MX-206 Frequency
THD:
<.05% @ +20dBu, 20 Hz-20KHz; input switch @ -40dB
6-channel Mic Mixer or LX-308 8-channel Line-level
Hum & Noise:
(20 Hz-20 KHz noise bandwidth, input switch at -60dB)
< -129 dBu equivalent input hum and noise
Mixer.
Max Voltage Gain:
Features and Specifications are subject to change or improvement without notice.
Crosstalk:
Size:
Shipping Weight:
< -100 dBu output noise; all level controls minimum
84 ± 2 dB: Mic Input to Master Output
34 ± 2 dB: Aux Input to Master Output
< -60 dB @ 20KHz, between any inputs or outputs
19”L x 1.75”H x 6.6”D
10.0 lbs
p0499 MX-406
Ashly Audio Inc., 847 Holt Road, Webster, NY 14580-9103 • 800.828.6308 • 716.872.0010 • Fax: 716.872.0739
• http://www.ashly.com • Email: [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement