Download the Mier Products DA-500 Cut Sheet

Download the Mier Products DA-500 Cut Sheet
THE ORIGINAL ...
AFFORDABLE AND RELIABLE
DRIVE-ALERT
DRIVEWAY ALARM &
VEHICLE DETECTION SYSTEMS
The DA-500 Drive-Alert is a multi-purpose, solid-state electronic
alarm system designed to detect vehicle traffic in driveways, farm
lanes, intersections and any areas where knowledge of vehicle movement is desired.
This system does not use a PIR sensor. Thus, these systems DO NOT
have the false alarms common to IR systems; such as being triggered
by animals, fog, weather, etc...
(See the DA-600 for a wireless version of the DA-500)
Home
A residential installation allows the homeowner to know when someone
enters the driveway. This is accomplished by an out-of-sight sensor
which detects moving metal objects such as cars, trucks, motorcycles
or bicycles. When the sensor detects a metal object, it sends a signal
to the control panel which then sounds an electronic whistle alert.
(DA-655 accessory sounds a pleasant chime alert with volume control)
Farm or Construction
Placing the sensor next to objects such as campers, tractors, trailers,
gasoline tanks, etc allows you to detect any movement of those
objects; aiding in the prevention of theft and vandalism.
Business
Restaurants, banks, and other businesses across the country utilize
the Drive-Alert to detect traffic at their drive-up windows.
DA-500 Drive-Alert Accessories &
Technical Information
DA-500 Installation
The Drive-Alert Master Control Panel (containing the electronic whistle)
is mounted easily and in any enclosed area with 120 VAC access. The
sensor is buried 6” deep parallel to the drive or area being protected. A
spade or lawn edger may be used to route the cable 6” under the
surface of the ground to the control unit. Extra sensors may be added
by wiring them in series. The sensitivity of the sensors’ operating range
is simply adjusted at the control panel, and the length of the time the
electronic whistle sounds is also adjustable.
For more features please see the accessories section, and see our
other models of cabled and wireless Drive-Alert systems.
Mier Products’ Drive-Alert Warranty Program
The Mier Products Limited Warranty Program covers Drive-Alert Products
- for the original owner only - for one year from the date of purchase
against defects in original parts or workmaship. It agrees to repair or
replace such defects (at Mier Products’ option) without charge for parts
nor labor, but only if the defective unit is returned prepaid to Mier
Products, Inc., Kokomo, IN, within the first year.
Responsibility is not assumed for damage due to accident, shipping, faulty
wiring, overload of Drive-Alert output, or installation other than that
recommended by Mier Products, Inc. Repair work not covered by the Mier
Products Limited Warranty Program will be made at a nominal charge.
DA-500 Accessories
The DA-655 Chime with volume control is the most
popular accessory for the DA-500. This pleasant
sounding chime takes the place of the whistle in the
control panel. This is ideal for drive-up window applications or high traffic areas where the shrill whistle might
become annoying to the user. There is also a volume
control knob which allows the user to turn it from the off
position up to a very loud level.
The DA-505 Timer Control accessory is used to turn on
lights, trigger sirens or bells, or activate other equipment
such as opening a gate or turning on cameras.
The DA-505 will turn on 10 amps of lights, sirens, or
bells. The unit simply plugs into a 120VAC outlet and
contains its own receptacle to provide power to lights or
alarms.
The lights or alarms can be adjusted to operate from 1 to
45 minutes.
The DA-051 Sensor. Up to three sensors can be used
when the owner wishes to monitor more than one
location. The PVC encased sensor comes with cable
attached. When ordering additional sensors, please
designate how much cable is needed.
The sensor may be placed up to 5,000 feet from the
Master Control Panel.
The DA-052 Whistle with volume control accessory
provides an additional whistle with volume control. It is
the same type as the whistle contained in the Control
Panel. This additional whistle is mounted on a chrome
plate for easy and professional looking installation. As
many as 10 remote whistles may be installed.
Wireless Vehicle Detection * Driveway Alarms * Drive-Up Window Detection * Buried Sensor
Systems * Intrument Boxes * DVR/VCR Lockboxes * Flush-Mount Cabinets * Outdoor
Enclosures * Temperature Controlled Enclosures * Power Supply Boxes * Siren/Speaker
Cabinets * Bell Boxes * Battery Cabinets * Transformer Enclosures * Custom Enclosures
and Fabrication
www.mierproducts.com
[email protected]
800-473-0213
765-457-0223
Easier installation of remote chimes and lights with the ...
DA-503
DA-504
DA-503 and DA-504
Drive-Alert Driveway Alarm and
Vehicle Detection Systems
(For easier to install wireless models with these same features, see the DA-603 and DA-604 Drive-Alerts)
Mier Products line of Drive-Alert Driveway Alarms are designed to detect
traffic in driveways, farm lanes, drive-up windows, or any area where
knowledge of vehicle movement is desired.
The Drive-Alert’s out of sight sensor detects moving metal objects such as
cars, trucks, motorcycles, or bicycles. These sensors are not PIR sensors.
Thus, they DO NOT have the false alarms that are typical of IR sensors
such as alarms triggered by weather, animals, fog, etc.
Once the sensor detects a moving metal object, it sends a signal to the
Master Control Panel which then activates chimes and/or lights depending
on the model you choose.
Sensor(s) can be placed alongside stationary equipment such as campers,
tractors, trailors, and gasoline tanks. Up to three sensors may be used.
They will detect movement of this equipment or of a vehicle approaching
and sound an alarm; aiding in the prevention of theft and vandalism.
The DA-503 and DA-504 Drive-Alert models are hard-cabled
systems that detect a vehicle entering the monitored area(s), and
then sound a chime or turn on lights by using the home’s/business’
existing electrical wiring. Therefore, you get the security you want
without the need for hard wiring or electrical work.
With either of these models an owner will know when a vehicle enters
the drive or anywhere a sensor has been buried, even from the far
reaches of the house such as the basement or an upstairs bedroom,
a workshop on a farm, or at a drive-up window.
When the sensor detects a vehicle, a signal is sent through the home/
farm/business’ existing wiring to activate pleasant chimes and/or lights
wherever the owner designates. All of this without a minute’s wiring of
chimes or lamp modules!
The DA-503 Drive-Alert detects vehicles and signals DA-058 Remote
Chime(s) to sound. The DA-503 Complete includes : one control
panel, one chime, and one sensor with 100 feet of cable. Additional
chimes and varying lengths of cable are available.
The DA-504 Drive-Alert detects vehicles and signals DA-058 Remote
Chime(s) to sound AND turns on lights.
This system uses two methods to turn on lights:
The DA-060 Lamp Module plugs into any standard wall outlet. Your
existing lamps are then simply plugged into these modules. Your
lamps act normally, and are also triggered when a vehicle is detected.
The DA-059 Wall Switch functions as a standard on/off wall switch, and
also receives a signal of vehicle detection and turns on those lights.
The DA-504 Complete includes : one control panel, one chime, one
lamp module OR wall switch, and one sensor with 100 feet of cable.
Additional chimes, lamp modules, wall switches, and/or varying lengths
of cable are available.
Wireless Vehicle Detection * Driveway Alarms * Drive-Up Window Detection * Buried Sensor
Systems * Intrument Boxes * DVR/VCR Lockboxes * Flush-Mount Cabinets * Outdoor
Enclosures * Temperature Controlled Enclosures * Power Supply Boxes * Siren/Speaker
Cabinets * Bell Boxes * Battery Cabinets * Transformer Enclosures * Custom Enclosures
and Fabrication
www.mierproducts.com
[email protected]
800-473-0213
765-457-0223
DA-503 & DA-504 Drive-Alert
Accessories & Technical Information
DA-503 & DA-504 Accessories
The DA-058 Remote Chime provides a pleasant
sounding chime when a vehicle is detected. Several of
these can be used with just one Drive-Alert system
(models DA-503, DA-504, DA-603, DA-604).
Installation is quick and easy! All you have to do is plug
them into a standard wall outlet.
The DA-060 Lamp Module is used to turn on lamps/
lights. Simply plug this accessory into a standard wall
outlet, and then plug a lamp into it. The lamp will still act
as a normal lamp, but will also turn on when a vehicle is
detected by the DA-504 or DA-604 Drive-Alert. Several
can be used with just one Drive-Alert.
The DA-059 Wall Switch is used to turn on overhead or
outdoor lights. Simply replace the existing wall outlet with
this accessory. The switch will still act as a normal
switch, but will also turn on those lights when a vehicle is
detected by the DA-504 or DA-604 Drive-Alert. Several
can be used with just one Drive-Alert.
The DA-051 Sensor. Up to three sensors can be used
when the owner wishes to monitor more than one
location. The PVC encased sensor comes with cable
attached. When ordering additional sensors, please
designate how much cable is needed.
The sensor may be placed up to 5,000 feet from the
Master Control Panel.
Wireless Vehicle Detection * Driveway Alarms * Drive-Up Window Detection * Buried Sensor
Systems * Intrument Boxes * DVR/VCR Lockboxes * Flush-Mount Cabinets * Outdoor
Enclosures * Temperature Controlled Enclosures * Power Supply Boxes * Siren/Speaker
Cabinets * Bell Boxes * Battery Cabinets * Transformer Enclosures * Custom Enclosures
and Fabrication
DA-503 & DA-504 Installation
The Drive-Alert Master Control Panel is mounted easily and in any
enclosed area with 120 VAC access. The sensor is buried 6” deep
parallel to the drive or area being protected. A spade or lawn edger may
be used to route the cable 6” under the surface of the ground to the
control unit. Extra sensors may be added by wiring them in series. The
sensitivity of the sensors’ operating range is simply adjusted at the
control panel. Maximum sensor monitoring range is a 16’ circle around
the sensor.
For more features please see the accessories section, and see our
other models of cabled and wireless Drive-Alert systems.
Mier Products’ Drive-Alert Warranty Program
The Mier Products Limited Warranty Program covers Drive-Alert Products
- for the original owner only - for one year from the date of purchase
against defects in original parts or workmaship. It agrees to repair or
replace such defects (at Mier Products’ option) without charge for parts
nor labor, but only if the defective unit is returned prepaid to Mier
Products, Inc., Kokomo, IN, within the first year.
Responsibility is not assumed for damage due to accident, shipping, faulty
wiring, overload of Drive-Alert output, or installation other than that
recommended by Mier Products, Inc. Repair work not covered by the Mier
Products Limited Warranty Program will be made at a nominal charge.
www.mierproducts.com
[email protected]
800-473-0213
765-457-0223
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement