CP55IQ Specification Sheet 99045170C

CP55IQ Specification Sheet 99045170C
SPECIFICATION SHEET
CP55IQ SERIES
RANGE HOODS
All-in-one design includes liner, blower, filtration,
controls, lighting, and damper for easy installation
into custom canopy hoods. Intended for all
residential applications, including commercialstyle cooking surfaces.
iQ6 - 600 CFM Blower System
providing:
FEATURES
•Up to 22x more energy efficient than comparable models.
•Guaranteed Performance System (GPS) technology
•Best in class quiet operation.
•Up to 30% faster smoke and odor
removal than comparable models.
• Cabinet mount - custom applications
• Finish: 430 Stainless Steel #4 Brushed
• Widths: 34-3/8”, 40-3/8”
• Depth: 19-1/4”
• 8” round duct connector with backdraft damper
LED lighting (2 LED modules, 6 Watts max.) 3000K
•1-level
nominal
accessible, dishwasher safe stainless steel
•Easily
Hi-Flow baffle filters with handles
•4-speed electronic blower control
• Quiet iQ6 blower system with high efficiency BLDC motor
Sentry - automatically turns blower to high speed
• Heat
when excess cooking heat is detected
timer control automatically shuts off range hood after
•Delay
10 minutes
•Special control indicates when it’s time to clean the filter
•For indoor use only
calibrates the hood system to every installation to provide
up to 30% more CFM than standard range hoods.
•Using a duct reducer with this hood may prevent the product
from calibrating.
8”
12
7/
411”
TM
”
TM
4-1
/
7/8 2”
”
”
-3/
kit - ANKCP55
• Non-ducted
- Charcoal filters included
• Charcoal filters - AFCROUND2
• Remote control (Model ACR3)
• Universal Make-Up Air Damper (Models MD6TU,
3”
CL
34
OPTIONS (Not included with hood. Purchase separately.)
3”
7/8
8”,
40
-3/
8”
19
1/
4”
MD8TU, MD10TU)
SPECIFICATIONS
VOLTS AMPS
120
4.7
CFM / SONES CFM / SONES
(Boost)
(High Speed)
600 / 8.5
450 / 5.5
CFM / SONES
(Med. Speed)
CFM / SONES
(Low Speed)
DUCT
290 / 2.0
150 / <0.3
8" round
This product was tested by Broan-NuTone for airflow performance using the ANSI/AMCA 210 Standard, which is equivalent to the Home Ventilating Institute
HVI 916 - Procedure for Air Flow Testing, and tested for sound performance using the ANSI S12.51 Standard, which is equivalent to the Home Ventilating
Institute HVI 915 - Procedure for Loudness Rating of Residential Fan Products.
BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711
BEST Drummondville, QC, Canada www.BestRangeHoods.com 866-737-7770
REFERENCEQTY.
REMARKS
Project
Location
Architect
Engineer
Contractor
Submitted by
Date
51B99045170C
To minimize the gap around the power pack, take actual width and depth measurements of power pack and add 1/16” to get D
and E measurements. Cut the hole in the bottom of the cabinet according to dimensions. See chart and illustration for details.
POWER PACK
SERIES
WIDTH
36”
CP55IQ
42”
CUTOUT DIMENSIONS
D
E
19 3⁄8”
34½”
40½”
19 3⁄8”
D
E
CP55IQ SERIES HOOD SYSTEM
MODEL 634 OR 644
ROOF CAP
-- OR --
MODEL 643
8” ROUND WALL CAP
8” ROUND
ADJUSTABLE ELBOW
8” ROUND
STANDARD DUCT
8” ROUND ADAPTER WITH DAMPER
(INCLUDED WITH CP55IQ SERIES HOOD)
CP55IQ SERIES
HOOD
All duct or blower accessories sold separately
unless noted otherwise.
SINGLE iQ6 BLOWER (600 CFM)
(included)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising