pci_cat.pdf

pci_cat.pdf
Open the bookmarks window for
easy navigation through this catalog.
Click here to jump to the
Table of Contents.
Welcome to
Practical Components
Practical Components is a distributor of mechanical IC
samples or “dummy” components and also distributes
SMD production tools and equipment.
Frequently Asked Questions
What are dummy components?
Dummy components are the exact mechanical equivalent of
functional electronic components.
Why use dummy components?
Dummies save money. In cases where only mechanical characteristics are required, dummy components can be used instead of
live functioning components. Because there is not an expensive
die inside the package, the cost for performing mechanical testing
is significantly lower.
Who is Practical Components?
A team of dedicated electronic industry professionals makes up
Practical Components, offering value pricing, on-time delivery, and
superior service to customers. The Practical Components team is
ready to provide project assistance in the areas of technical
component knowledge, drawings, component land patterns, and
PCB practice kits.
What is a PCB Practice Kit?
Combining both the PCB Practice Board and dummy components
allows customers to conduct assembly process evaluation without
using high-cost live components and functional PC Boards. Kits
are available in a single pack, for employee hand soldering
training, or packaged for production equipment evaluation. Both
XY Theta data and Gerber data are available without charge.
What other products does
Practical Components offer?
There are a number of solder training aids, tools,
and equipment that Practical Components carries. The catalog has
the latest information regarding available products. In addition,
your sales representative can supply technical information and
pricing on these products.
Who uses dummy components?
Companies that are involved with electronic
component assembly, testing, evaluation and employee training.
Contacting Practical Components.
If you should have any additional questions concerning Practical
Components, our products or policies, we offer a number of
different ways to contact us:
Practical Components, Inc.
15211 Springdale Street
Huntington Beach, CA 92649
Tel: 1-714-899-8309
Fax: 1-714-899-8599
[email protected]
www.practicalcomponents.com
How To Place Your Order
Our sales staff is ready to serve you from 7:30 A.M. to
5 P.M. Pacific Standard Time, Monday through Friday.
Our fax lines are open 24 hours every day.
Fax and email orders received after normal business hours are processed the next business day.
Please include your telephone number so we can
confirm your order.
PRACTICAL
COMPONENTS
Practical Components, Inc.
15211 Springdale Street
Huntington Beach, CA 92649 USA
Phone: 1-714-899-8309
Fax: 1-714-899-8599
Email: [email protected]
Web Site: www.practicalcomponents.com
F.O.B. Is Huntington Beach, CA USA
Terms and Conditions
Out Of Stock Items: Items not available for immediate shipment
will be shipped as they become available. Items not available at
the end of 90 days will be cancelled. The number of back-ordered
days may be extended beyond 90 days with customer approval.
Return Policy: Returns must be made promptly and accompanied
by a return authorization number. Please contact a customer
service representative to obtain a return authorization number. All
returns must be made within 30 days of date of invoice and
accompanied by return authorization number.
Return freight charges must be prepaid.
C.O.D. returns cannot be accepted.
Return merchandise in original packaging and in
resalable condition.
Please note that items returned due to customer error may be
subject to a restocking charge of 25%.
Non-catalog items are not returnable.
Catalog Listings: Not all products listed in this catalog are
maintained in stock, and all product specifications and prices for
each product are current as of the date of publication. Product
listings, specifications and prices for each product are subject to
change without notice.
Product Liability: Practical Components’ sole obligation for
products that prove to be defective within 10 days of purchase will
be replacement or refund. Practical Components gives no
warranty either expressed or implied and specifically disclaims all
other warranties, including warranties for merchantability
and fitness.
In no event shall Practical Components’ liability exceed the
buyer’s purchase price nor shall Practical Components be liable
for any indirect or consequential damages.
Shipment Damage: Merchandise is carefully packaged in
compliance with carrier requirements. Claims for loss or damage
in transit must be made with the carrier by the customer. All
shipments should be unpacked and inspected immediately upon
receipt. If damage does not become apparent until shipment is
unpacked, make a request for inspection by the carrier’s agent.
Failure to do so will result in the carrier refusing to honor
the claim.
Non-Catalog Items: Merchandise not listed in our catalog, if
available from our suppliers, may be subject to minimum order
quantities and/or special handling charges. Shipment is made as
quickly as deliveries are received from our suppliers. Special order
products are sold on a non-returnable basis.
Quotations: All items are subject to prior sale.
Dishonored Check Policy: If a check you give us as payment is
dishonored for any reason by the bank or any other institution on
which it is drawn, you agree to pay us $20.00 as a service charge.
In addition, you agree to pay any other reasonable charges
imposed by any check verification company or collection agency
that we may use for collection.
Prices/Quantities: Prices are subject to change without notice and
quantities may be limited.
Handling Charge: A $10.00 handling charge applies to all orders
less than $50.00.
Terms: We accept Visa, MasterCard and American Express
(minimum order is $50.00).
Open Account: We bill on a net 30-day basis to customers with
approved credit.
Large Quantity Quotations: Practical Components will be happy
to quote quantities in excess of the amounts shown in the catalog.
Freight Charges: On open accounts, actual freight charges are
added to the invoice. A packing and handling fee of $4.50 is added
to the order. C.O.D accounts will have the freight charges prebilled to the C.O.D. total in addition to a $4.50 packing and
handling charge.
Special Requirements: Please include specific instructions if you
require special packing, marking, shipping, routing or insurance.
*All prices are in US$.
Contents
Click on highlighted section heading to jump
directly to that section.
Ball Grid Array
PBGA Plastic Ball Grid Array ...................................................... 4
CSBGA Chip Scale BGA Package ............................................. 7
CBGA Ceramic Ball Grid Array ................................................... 8
High Temperature FR4 CBGA Test Board .................................. 8
BGA Variable Pitch and Array Board .......................................... 9
µBall Grid Array ......................................................................... 10
µBGA Test Boards ..................................................................... 14
Printed Circuit Board Kits
Custom PCB Practice Kits ........................................................ 37
PC008 Practice Board and Kits ................................................ 38
PC008 Test Pattern ................................................................... 40
SMTA Saber Evaluation PC Board and Kits ............................. 41
PCB003 Solder Practice Board and Kit .................................... 42
Omni Training Kits ..................................................................... 43
Through-Hole Training Kit, Through-Hole Recertification
Kit, Standard Pitch Training Kit, Fine Pitch Training Kit
Flip Chip
Flip Chip .................................................................................... 15
Flip Chip Test Boards ................................................................ 16
Plastic Quad Flat Pack
QFP Plastic Quad Flat Pack ...................................................... 18
LQFP Low Profile Quad Flat Pack ............................................ 21
QFN Quad Flat Pack Non-Leaded ............................................ 21
BQFP Bumpered Quad Flat Pack ............................................. 22
Omni Training Products
Workmanship Acceptance Posters .......................................... 44
SMT Workmanship Criteria on CD-ROM .................................. 44
Terminal Holder ......................................................................... 44
Unified Inspection Criteria Workmanship Manuals .................. 45
Unified Wiring and Soldering Handbook ................................. 45
Soldering Workbook ................................................................. 45
Practical Production Tools
Ceramic Body
CQFP Ceramic Quad Flat Pack ................................................ 23
LCC Leadless Ceramic Carrier ................................................. 23
Small Outline
SOIC Small Outline Integrated Circuit ...................................... 24
TSOP Thin Small Outline Package ........................................... 25
SSOP Small Shrink Outline Package ....................................... 26
TSSOP Thin Shrink Small Outline Package ............................. 28
SON Small Outline Non-Leaded Package ............................... 29
Plastic Leaded Chip Carrier
PLCC Plastic Leaded Chip Carrier ........................................... 30
Passives, Transistors, Discretes
SMT Surface Mount Transistors ............................................... 31
SMC Surface Mount Ceramic Capacitors ................................ 32
SMR Surface Mount Resistors .................................................. 33
Zero Ohm Jumper Resistors .................................................... 34
SMTA Surface Mount Tantalum Capacitor ............................... 34
SME Surface Mount Electrolytic Capacitors ............................ 35
Melf Diodes ............................................................................... 35
Through-Hole
TO Through-Hole Transistors ................................................... 36
Axial Leaded Resistors ............................................................. 36
Weller QFP Lead Repair Kit ...................................................... 46
Weller Reballing Kit ................................................................... 47
Personal Magnifiers .................................................................. 48
Adjustable Matrix Trays ............................................................. 49
Practical Vacuum Handling Tools ............................................. 50
Practical Hand-Vac, Practical Pen-Vac, Practical Bulb-Vac,
Practical SMD-Vac-GP, Practical Pac-Vac, Practical HP-300
Weller Soldering Gun Kit .......................................................... 52
Weller Circuit Board Vise .......................................................... 52
Weller Self-Contained 2-Person Fume Extractor ...................... 52
Xcelite Pliers Kit—Electronics Handy Pack Assortment .......... 52
Xcelite Attaché Tool Cases ....................................................... 53
Xcelite Multi-Purpose Tool Kit ................................................... 54
Xcelite Offset Ratchet Screwdriver Set ..................................... 54
Xcelite Personal Computer Repair Kit ...................................... 54
Eram Mutli-Purpose Assembly Kit ............................................ 54
Eram Anti-Static 5-Tweezer and Micro-Cutter Kit ..................... 54
Tech Spray Products
Cleaners/Degreasers, Defluxers, Dusters, Freeze Spray ......... 55
Static Control ............................................................................ 58
Desoldering Braid ..................................................................... 59
Equipment and Specialty Products .......................................... 60
Swabs ....................................................................................... 60
Wipes ........................................................................................ 61
Glossary .................................................................................... 62
Fax Order Form ......................................................................... 63
PBGA
Plastic Ball Grid Array 1.0mm Pitch
Part Number
I/O Count
Pitch
Body Size
Ball Matrix
Ball Alignment
PBGA84-1.0mm-11mm
PBGA144-1.0mm-13mm
PBGA156-1.0mm-15mm
PBGA160-1.0mm-15mm
PBGA196-1.0mm-15mm
PBGA208-1.0mm-17mm
PBGA256-1.0mm-17mm
PBGA288-1.0mm-23mm
PBGA324-1.0mm-23mm
84
144
156
160
196
208
256
288
324
1.0mm
1.0mm
1.0mm
1.0mm
1.0mm
1.0mm
1.0mm
1.0mm
1.0mm
11mm
13mm
15mm
15mm
15mm
17mm
17mm
23mm
23mm
—
12 x 12
14 x 14
14 x 14
14 x 14
16 x 16
16 x 16
22 x 22
22 x 22
—
Full Grid
Perimeter
Perimeter
Perimeter
Perimeter
Full Grid
Perimeter
Perimeter
Notes
Part Number System
Overall thickness of 1.0mm pitch PBGA packages will vary in
size (please call for more details).
Parts are packaged in JEDEC trays.
Call for tape and reel quantity and availability.
Solder ball material is eutectic 63/67 SnPb.
Some components are daisy-chained (please call for
more details).
Daisy-chained connections are connections between I/O
(input/output) of the component.
Plastic Ball
Grid Array
PBGA144–1.0mm–13mm
I/O Count
Quantity
Per Tray
176
160
126
126
126
90
90
60
60
Body Size
Pitch
Add “T” to end of part number for Tray.
Add “TR” to end of part number for Tape and Reel.
BGA packages should be baked at 125°C for 24 hours prior to
assembly to prevent delamination during the assembly process.
Parts can be baked and dry-packed.
Plastic Ball Grid Array 1.5mm/1.27mm Pitch
Part Number
I/O Count
Pitch
Body Size
Ball Matrix
Ball Alignment
PBGA121-1.27mm-15mm
PBGA169-1.5mm-23mm
PBGA225-1.5mm-27mm
PBGA256-1.27mm-27mm
PBGA272-1.27mm-27mm
PBGA292-1.27mm-27mm
PBGA313-1.27mm-35mm
PBGA324-1.27mm-27mm
PBGA352-1.27mm-35mm
PBGA388-1.27mm-35mm
PBGA420-1.27mm-35mm
PBGA480-1.27mm-35mm
PBGA676-1.27mm-35mm
121
169
225
256
272
292
313
324
352
388
420
480
676
1.27mm
1.5mm
1.5mm
1.27mm
1.27mm
1.27mm
1.27mm
1.27mm
1.27mm
1.27mm
1.27mm
1.27mm
1.27mm
15mm
23mm
27mm
27mm
27mm
27mm
35mm
27mm
35mm
35mm
35mm
35mm
35mm
11 x 11
13 x 13
15 x 15
20 x 20
20 x 20
20 x 20
25 x 25
20 x 20
26 x 26
26 x 26
26 x 26
26 x 26
26 x 26
Full Grid
Full Grid
Full Grid
Perimeter
Perimeter
Perimeter
Stagger
Perimeter
Perimeter
Perimeter
Perimeter
Perimeter
Full Grid
Notes
Part Number System
Plastic Ball
Grid Array
Parts are packaged in JEDEC-trays.
Call for tape and reel quantity and availability.
Solder ball material is eutectic 63/67 SnPb.
Solder ball diameter is 0.76mm (30 mils).
Daisy-chain connections are connections between I/O
(input/output) of the component.
Daisy-chain connections are used, paired with a PC board that
has complimentary connections between pads in order to test
for continuity. BGA packages should be baked at 125°C for 24
hours prior to assembly to prevent delamination during the
assembly process.
4
PBGA121–1.27mm–15mm
I/O Count
Quantity
Per Tray
126
60
40
40
40
40
24
40
24
24
24
24
24
Body Size
Pitch
Add “T” to end of part number for Tray.
Add “TR” to end of part number for Tape and Reel.
Parts can be baked and dry-packed.
Most PBGA packages are assembled with “dummy” die to
conduct thermal coefficient testing.
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
PBGA
Top View Die Side
1
4
3
2
7
6
5
9
8
ø1.00(3X) Ref.
10
11 12
Bottom View Ball Side
13
13
12
11
10
9
8
7
6
5
3
4
2
ø0.10 S C
ø0.30 S C A S B S
ø0.75±0.15
1
PBGA169-1.5mm-23mm
A
A
B
B
C
C
H
1.50
18.00
F
G
23.00±0.20
D
E
20.00 Ref.
D
E
F
G
H
J
J
K
K
L
L
M
M
N
N
3.00*45°(4X)
B
1.50
20.00 Ref.
Pin #1 Corner
0.97Ref.
8.00
0.15 C
A
23.00±0.20
30° Typ.
0.20(4X)
C
Seating Plane
0.60±0.10
0.56 Ref.
Pin #1 Corner
1
2
3
2.13±0.13
6
5
7
8
9
10 11 12 13
Bottom View Ball Side
ø1.00(3X) Ref.
Top View Die Side
4
15 14
14 15
13 12 11 10
9
8
7
6
5
4
3
2
ø0.10 S C
ø0.30 S C A S B S
ø0.75±0.15(225X)
1
A
PGBA225-1.5mm-27mm
A
B
B
C
C
D
D
H
J
1.50
21.00
G
27.00±0.20
E
F
24.00 Ref.
E
F
G
H
J
K
K
L
L
M
M
N
N
P
P
R
R
4.00*45°(4X)
B
1.50
24.00 Ref.
21.00
1.17 Ref.
0.15 C
30° Typ.
A
27.00±0.20
0.20(4X)
C
Seating Plane
2.33±0.13
0.60±0.10
0.56 Ref.
1 2 3 4
5 6 7
8
Bottom View Ball Side
ø1.00(3X) Ref.
Top View Die Side
Pin #1 Corner
20 19 18 17 16 15 14 13 12 11 10 9
9 10 11 12 13 14 15 16 17 18 19 20
8
7 6 5
A
4 3 2
ø0.10 S C
ø0.30 S C A S B S
ø0.75±0.15(256X)
1
PBGA256-1.27mm-27mm
A
H
J
H
J
K
L
M
N
1.27
E
F
G
24.13
E
F
G
27.00±0.20
B
C
D
24.00 Ref.
B
C
D
K
L
M
N
P
P
R
T
R
T
U
V
U
V
W
W
Y
Y
4.00*45°(4X)
B
1.27
24.00 Ref.
1.17 Ref.
30° Typ.
24.13
0.15 C
A
27.00±0.20
0.20(4X)
C
0.56 Ref.
Seating Plane
0.60±0.10
2.33±0.13
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
5
PBGA
Pin #1 Corner
1
2 3 4
ø1.00(3X) Ref.
Top View Die Side
Bottom View Ball Side
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8
7 6 5 4
ø0.10 S C
ø0.30 S C A S B S
ø0.75±0.15(313X)
3 2 1
A
A
B
C
B
C
D
E
D
E
F
G
H
J
H
J
L
K
L
30.48
30.00 Ref.
K
M
N
P
R
2.54
1.27
F
G
35.00±0.20
PBGA313-1.27mm-35mm
M
N
P
R
T
T
U
U
V
W
Y
V
W
Y
AA
AB
AA
AB
AC
AD
AC
AD
AE
AE
4.00*45°(4X)
B
1.27
2.54
30.00 Ref.
30.48
0.15 C
0.15 C
1.17 Ref.
A
0.15 C
30° Typ.
C
Seating Plane
0.56 Ref.
PBGA352-1.27mm-35mm
35.00±0.20
0.20(4X)
2.33±0.13
0.60±0.10
Pin #1 Corner
Top View Die Side
ø1.00(3X) Ref.
Bottom View Ball Side
4.00*45°(4X)
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
T
U
V
W
Y
AA
AB
AC
AD
AE
AF
1.27
31.75
30.00±0.20
30.00 Ref.
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
T
U
V
W
Y
AA
AB
AC
AD
AE
AF
ø0.10 S C
ø0.30 S C A S B S
ø0.75±0.15(352X)
26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
1 2 3 4 5 6 7 8 9 10 1112 13 14 15 16 17 18 19 20 21 22 23 2425 26
B
1.27
30.00 Ref.
0.15 C
1.17 Ref.
31.75
30° Typ.
A
35.00±0.20
0.20(4X)
C
0.56 Ref.
6
Seating Plane
0.60±0.10
2.33±0.13
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
CSBGA
Chip Scale BGA Package
Part Number
I/O Count
Body Size
Pitch
Ball Matrix
Ball Alignment
CSBGA20-5mm-1.0mm
CSBGA28-5mm-.8mm
CSBGA48-8mm-1.0mm
CSBGA56-9mm-.8mm
CSBGA72-9mm-.8mm
CSBGA80-10mm-1.0mm
CSBGA108-10mm-.8mm
CSBGA96-12mm-1.0mm
CSBGA120-13mm-1.0mm
CSBGA156-13mm-.8mm
CSBGA120-9x13mm-.8mm
20
28
48
56
72
80
108
96
120
156
120
5mm
5mm
8mm
9mm
9mm
10mm
10mm
12mm
13mm
13mm
9 x 13mm
1.0mm
.8mm
1.0mm
.8mm
.8mm
1.0mm
.8mm
1.0mm
1.0mm
.8mm
.8mm
6x6
6x6
8x8
10 x 10
11 x 11
12 x 12
11 x 11
14 x 14
13 x 13
15 x 15
9 x 14
Perimeter
Perimeter
Perimeter
Perimeter
Perimeter
Perimeter
Perimeter
Perimeter
Perimeter
Perimeter
Full Array
Notes
Part Number System
Chip Scale
BGA Package
Parts are packaged in waffle trays (tray quantity may vary).
All CSBGA packages are daisy-chained.
Call for tape and reel quantity and availability.
Package outline drawings and daisy-chain patterns are available
upon request.
A1 Corner
8
7 6
CSBGA20–5mm–1.0mm
I/O Count
5 4
3
2 1
8.0
7.0
8.0
Top View (Die Side)
Body Size
Add “TR” to the end of part number for Tape and Reel.
1
A
7.0
Pitch
2
3
4 5
6
7 8
A
B
B
C
C
D
D
E
E
F
F
G
G
H
H
1.0
7.0
0.5
Bottom View (Ball Side)
X-Ray View (Daisy-Chain Pattern)
1.70 Max.
0.75
0.35
0.6 Nom
0.45 Nom
Side View
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
7
CBGA
Ceramic Ball Grid Array
Part Number
I/O Count
Pitch
Body Size
Ball Matrix
Ball Alignment
CBGA121-1.27mm-15mm
CBGA196-1.27mm-18.5mm
CBGA256-1.27mm-21mm
CBGA304-1.27mm-21x 25mm
CBGA361-1.27mm-25mm
CBGA625-1.27mm-32.5mm
121
196
256
304
361
625
1.27mm
1.27mm
1.27mm
1.27mm
1.27mm
1.27mm
15mm
18.5mm
21mm
21 x 25mm
25mm
32.5mm
11 x 11
14 x 14
16 x 16
16 x 19
19 x 19
25 x 25
Full Array
Full Array
Full Array
Full Array
Full Array
Full Array
Notes
Part Number System
Parts are cavity up.
Parts are packaged in non-JEDEC waffle trays
(tray quantity may vary).
Parts are daisy-chained.
Ceramic Ball
Grid Array
CBGA196–1.27mm–18.5mm
I/O Count
Body Size
Pitch
Add “T” to the end of part number for Tray.
CBGA Test Board
High Temperature FR4 CBGA Test Board
T2
T1
PHONE: 714.899.8309 Fax: 714.899.8599
CBA2561.27mm-21mm
T1
T2
T2
T1
CBA1211.27mm-15mm
T2
CBA3611.27mm-25mm
T1 T2
CBA625CBA3041.27mm-32.5mm
1.27mm-21x25mm
P/N PC006 REV A
Practical Components now offers this high-temperature
FR4 CBGA board for placement and rework using
daisy-chain CBGAs.
Order the FR4 CBGA Test Board or configure custom kits to meet
your specific requirements.
E-MAIL: [email protected]
T1
Not to scale—Top/bottom view (double-sided).
Actual size of board is 3.5" x 3.5".
Notes
Kits can be configured to the customer’s requirements.
All CBGA components are 1.27mm pitch.
Gerber Data and X,Y Theta Data are available if required at
no charge.
Order Number: PCB006 (Board Only)
8
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
BGA Test Board
Variable Pitch and Array Board
VARIABLE PITCH & ARRAY
1.27mm pitch 26x26
Fax: 714.899.8599
Fax: 714.899.8599
E-mail: [email protected]
1.27mm pitch 34x34
Phone: 714.899.8309
Phone: 714.899.8309
1.27mm pitch 26x26
1.00mm pitch 26x26
0.5mm pitch 22x22
www.practicalcomponents.com
VARIABLE PITCH & ARRAY
0.75mm pitch 6x8
1.00mm pitch 26x26
1.00mm pitch 11x11
1.27mm pitch 34x34
0.8mm pitch 9x9
1.5mm pitch 15x15
1.00mm pitch 11x11
0.8mm pitch 18x18
1.5mm pitch 15x15
1.5mm pitch 20x20
1.5mm pitch 20x20
Top View
Bottom View
Mix and match components to configure your custom kit.
Practical Components is now offering a “one-of-a-kind” BGA
Variable Pitch and Array PC Board. Each board contains matrices
for the most popular ball pitches found on BGAs and CSPs. The
use of full matrices allows maximum flexibility for placing parts
with full, staggered, or perimeter configurations. Each board has a
mixture of even and odd matrices to enable placement, using
automatic equipment, of the highest ball counts available.
Notes
Kits can be configured to the customer’s requirements.
Gerber Data and X,Y Theta Data are available if required at
no charge.
Order Number: PCB005 (Board Only)
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
9
µBGA
µBall Grid Array
Part Number
TV-46A
TV-46AM
TV-62A
TV-62AM
TV-74A
TV-74AM
I/O Count
46
46
62
62
74
74
!
New
Pitch
Body Size
.75mm
.75mm
.75mm
.75mm
.75mm
.75mm
6 x 8mm
6 x 8mm
9.3 x 11.5mm
9.3 x 11.5mm
8.17 x 12.7mm
8.17 x 12.7mm
Notes
Part Number System
µBall Grid Array
Parts are packaged in waffle trays.
Parts are eutectic (SnPb) solder bumps.
Parts are daisy-chained.
Parts are available on tape and reel.
A= Qualified Daisy-Chain (reliability evaluation, stress,
life cycle testing).
AM=Mechanical Daisy-Chain (package handling, pick
and place evaluation).
X
5.76±0.05
Daisy-Chain Type
I/O Count
▲
TV-46
TV-74A
A1 Corner
5X 0.75
0.375
4X — 0.05
6
5
Index Area
(2.88)
(2.505)
4
3
Y
1
2
3
(5.51 Nominal Die)
(Nom) Z X
▲
A
(3.935)
7.87±0.05
B
C
®
®
TV46 C1
A
µBGA
(1.4)
0.375
D
(7.47 Nominal Die)
(Nom) Z X
E
(1.33)
7X 0.75
F
Datum Axis Y
G
Die 5
H
4X r0.2 Max
Die Pad 1
Datum Axis X
Die Pad 2
Back View
(2.505)
Bump View
Z
10
ø0.3±0.03
0.05 Z
ø0.1 Z XY
ø0.05 Z
9
Z
▲
Seating
Plane
10
▲
0.18±0.03 9
See Section Detail
Side View
(Scale=None)
0.84±0.05
A
▲
ST
Polyimide Tape ASM 6
// 0.1 Z
Die (0.432±0.025) thick
Typical Assembly
Section
Elastomer 7
Adhesive
Elastomer Seal
4 Sides/Edges 7
Lead
11
Notes:
1. Dimensioning and tolerancing per ASME Y14.5M–1994.
2. Do not subject part to ultrasonic cleaning or intense UV.
3. Mark back of die with laser.
4. Contact ball position designation per JESD 95–1, SPP –010
(Bumps E3, E4 are missing).
5. Die P/N TES5118.
6. Use Tessera Tape 22099D1AX, where X=suffix which
identifies tape manufacturer.
10
7. Elastomer=Tessera P/N.
106000100108 (Dow Corning 6810 Encapsulant).
103000100108 (Dow Corning 6910 Spacer Adhesive).
8. Parts to be cleaned per Tessera cleaning instructions APN01.
9. Make from eutectic solder ball (ø0.3mm). Dimensions apply after
solder ball reflow.
10. Datum Z established by high points of solder bumps.
11. Elastomer shall not extend beyond datum A.
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
µBGA
!
New
(5.75)
2X 1.6
4X 0.8
4X — 0.05
A1 Corner
Index
2X 1.2
12 11 10 9
8
7
6
TV-62
4
5
3
2
11±-.025 Die
(Nom) Z X
3
1
F
G
H
®
4X RO.2 Max
Datum
Axis 'X'
J
Back View
Datum Axis 'X'
Bump View
®
8.8±0.025 Die
(Nom) Z X
E
RAMBUS
µBGA
8X 1
D
®
9.3±0.05
B
C
TV62T
RAMBUS
(4.65)
Tessera
A
DIRECT - RDRAM µBGA®
TV - 62 T TAPE D.C.
YYWW DLLLL
X
11.5±0.05
Z
13
Seating
Plane
Side View (Scale=None)
See Section Detail
ø0.35±0.03
0.05 Z
ø0.1 Z XY
ø0.05 Z
Z
13
▲
0.25±0.03 10
0.89±0.05
ST
A
▲
// 0.1 Z
Die (0.4±0.025) thick
ø0.3
Elastomer 7
Notes:
1. Dimensioning and tolerancing per ASME Y14.5M–1994.
2. Do not subject part to ultrasonic cleaning.
12
Polyimide Tape ASM 6
(Conductor)
Typical Assembly
Section
9. Parts to be cleaned per Tessera cleaning instructions APN01.
3. Mark back of die with laser.
10. Make from eutectic solder ball (ø0.35mm). Dimensions apply after
solder ball reflow.
4. Contact ball position designation per JESD 95–1, SPP –010.
11. (Not used)
5. Silicon Die, 2000 Grit Grind.
12. Elastomer is not allowed to extend beyond datum A.
6. Use Tessera Tape 26399D1AX, where X=suffix which identifies tape
manufacturer.
13. Datum Z established by high points of solder bumps.
7. Elastomer=Tessera P/N as follows:
106000100108 (Dow Corning 6811 Encapsulant).
103000100108 (Dow Corning 6910 Spacer Adhesive).
8. (Not used)
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
11
µBGA
TV-74
8.17±0.05
4X — 0.05
Die Pad 2
Die Pad 1
(4.085)
A1 Corner
Index 3
6X 0.75
Y
7
▲
6
5
4
3
2 1
(7.49) Die
(Nom) Z X
E
0.375
F
(12.29) Die
G
H
Datum
Axis 'Y'
J
K
®
TV74 µBGA®
12.7±0.05
®
D
Tessera
B
C
RAMBUS
RAMBUS®
(6.35)
L 15X 0.75
M
N
DIRECT - RDRAM µBGA®
MTV - 74 MECHANICAL
YYWW MLLLL
A
Die 5
P
R
T
Bump View
4X R0.2 Max
Datum Axis 'X'
Z
Back View
10
▲ Seating
Plane
See Section Detail
0.05 Z
ø0.3±0.03
ø0.1 Z XY
9
ø0.05 Z
Z
10
▲
Side View
0.19±0.03 9
0.77±0.05
ST
A
▲
Polyimide Tape ASM 6
// 0.1 Z
Die (0.4±0.025 thick)
Elastomer 7
Typical Assembly
Section
Adhesive
Elastomer Seal
4 Sides/Edges 7
11
Lead
Notes:
1. Dimensioning and tolerancing per ASME Y14.5M–1994.
2. Do not subject part to ultrasonic cleaning or intense UV.
3. Mark back of die with laser.
4. Contact ball position designation per JESD 95–1,SPP –010.
5. Die P/N TES5119.
6. Use Tessera Tape 22799D1AX, where X=Suffix which identifies tape
manufacturer.
7. Elastomer=Tessera P/N.
106000100108 (Dow Corning 6810 Encapsulant).
103000100108 (Dow Corning 6910 Spacer Adhesive).
12
8. Parts to be cleaned per Tessera cleaning instructions APN01.
9. Make from eutectic solder ball (ø0.3mm). Dimensions apply after solder
ball reflow.
10. Datum Z established by high points of solder bumps.
11. Elastomer shall not extend beyond datum A.
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
13
µBGA Test Boards
TB-46 Test Board
TV46 TEST BOARD 7 – 16 – 96
®
dlg
13371T1A-10
2
1
24
23
22
21
16 17 18 19 20
10
11
12
13
14
15
TEST BOARD
µBGA™
9 8 7 6 5 43
dlg
13371T1A-9
2
1
24
23
22
21
16 17 18 19 20
TEST BOARD
µBGA™
9 8 7 6 5 43
dlg
13371T1A-8
®
®
2
1
24
23
22
21
16 17 18 19 20
TEST BOARD
µBGA™
9 8 7 6 5 43
dlg
13371T1A-7
2
1
24
23
22
21
16 17 18 19 20
TEST BOARD
9 8 7 6 5 43
dlg
94U-Ø
2
1
24
23
22
21
16 17 18 19 20
13371T1A-6
®
10
11
12
13
14
15
DCI -35 3697
µBGA™
10
11
12
13
14
15
DCI -35 3697
94U-Ø
10
11
12
13
14
15
10
11
12
13
14
15
DCI -35 3697
94U-Ø
DCI -35 3697
TEST BOARD
TEST BOARD
9 8 7 6 5 43
™
9 8 7 6 5 43
dlg
94U-Ø
µBGA
13371T1A-5
2
1
24
23
22
21
16 17 18 19 20
®
®
10
11
12
13
14
15
TEST BOARD
9 8 7 6 5 43
94U-Ø
µBGA™
dlg
DCI -35 3697
®
®
10
11
12
13
14
15
13371T1A-4
94U-Ø
DCI -35 3697
2
1
24
23
22
21
16 17 18 19 20
TEST BOARD
9 8 7 6 5 43
µBGA™
dlg
µBGA™
DCI -35 3697
®
13371T1A-3
TEST BOARD
dlg
94U-Ø
2
1
24
23
22
21
16 17 18 19 20
™
9 8 7 6 5 43
µBGA
13371T1A-2
2
1
24
23
22
21
16 17 18 19 20
dlg
TEST BOARD
9 8 7 6 5 43
13371T1A-1
2
1
24
23
22
21
16 17 18 19 20
µBGA™
10
11
12
13
14
15
®
10
11
12
13
14
15
®
10
11
12
13
14
15
94U-Ø
DCI -35 3697
94U-Ø
DCI -35 3697
94U-Ø
DCI -35 3697
Tessera µBGA TB 13371T1A
Not to scale
Notes
Test board has 10 daisy-chained chip sites per board.
Board is made with nickel/gold solder-pad finish.
Gerber data for solder stencil is supplied at no charge.
Order Number: TB46
TB-74 Test Board
Please call for details.
TB-188 Test Board
TV–188M
TV-188M µBGA®
DAISY-CHAIN
TEST SITE
A1
18 17 16 15 14 13
A1
12
19
DAISY CHAIN
TV-188M µBGA®
DAISY-CHAIN
TEST SITE
18 17 16 15 14 13
A1
12
19
11
20
10
9
22
TV-188M µBGA®
DAISY-CHAIN
TEST SITE
18 17 16 15 14 13
A1
12
19
11
20
10
21
A1
12
10
9
22
12
11
20
10
21
9
22
10
21
9
22
23
8
23
8
23
8
23
8
23
8
24
7
24
7
24
7
24
7
24
7
2 3 4
25
5
6
A1
2 3 4
1
25
TV-188M µBGA
DAISY-CHAIN
TEST SITE
®
5
6
A1
12
25
®
A1
12
10
9
22
6
2 3 4
25
®
A1
12
11
10
2 3 4
25
®
18 17 16 15 14 13
A1
12
19
10
9
22
5
6
1
TV-188M µBGA
DAISY-CHAIN
TEST SITE
®
18 17 16 15 14 13
12
19
11
20
21
9
22
6
11
20
21
5
1
TV-188M µBGA
DAISY-CHAIN
TEST SITE
18 17 16 15 14 13
19
20
21
5
1
TV-188M µBGA
DAISY-CHAIN
TEST SITE
18 17 16 15 14 13
19
11
20
2 3 4
1
TV-188M µBGA
DAISY-CHAIN
TEST SITE
18 17 16 15 14 13
19
11
20
10
21
9
22
10
21
9
22
23
8
23
8
23
8
23
8
23
8
24
7
24
7
24
7
24
7
24
7
2 3 4
25
1
5
6
2 3 4
25
5
6
®
2 3 4
1
25
®
5
6
2 3 4
1
25
Tessera µBGA PN 324—0168—REV00
®
5
6
1
2 3 4
25
5
6
1
TOP
The TB–188 test board has 10 daisy-chain test sites on one side,
and 10 bias/SIR test sites on the other, for use with the TV–188M
µBGA daisy-chain test package on both sides. The two sides are
laid out so as to use the same solder stencil aligned to three
global fiducial.
Notes
The test board is not perforated for snap-apart, but it is
designed so it can be cut into testable 5–up or 1–up coupons. The
drilled holes are for hard wiring with solder for in-situ testing at the
panel or coupon level (no plated through-holes).
Order Number: TB188
14
18 17 16 15 14 13
19
11
20
21
9
22
TV-188M µBGA®
DAISY-CHAIN
TEST SITE
18 17 16 15 14 13
19
11
20
21
TEST BOARD
TV-188M µBGA®
DAISY-CHAIN
TEST SITE
Not to scale
Board is made with nickel/gold solderpad finish.
Actual size of board is 2.75" x 6.5".
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
Flip Chip
Epoxy Encapsulant
Chip
Substrate
FB250
Flip Chip Bump
Part Number
FB250
FB500
Die Size
250 x 250 mils
500 x 500 mils
Bump Pitch
Passivation Via
UBM Diameter
Bump Height
Bump Diameter
No. of Bumps
Max. Bump Diagonal
Die Pad Size
Metal Thickness
Type
457 µm, 18 mil
102 µm
152 µm
140 µm
190 µm
48
7.7 mm
193 x 193 µm
12 kA
98/1/1 Al/Cu/Si
457 µm, 18 mil
102 µm
152 µm
140 µm
190 µm
96
16.5 mm
193 x 193 µm
12 kA
98/1/1 Al/Cu/Si
FA10-200 or
FA10-400
200 x 200 mils
400 x 400 mils
254 µm, 10 mil
80 µm
102 µm
110 µm
135 µm
317
7.9 mm
127 x 127 µm
12 kA
98/1/1 Al/Cu/Si
PB8-200 or
PB8-400 x 600
200 x 200 mils
400 x 600 mils
203 µm, 8 mil
73 µm
95 µm
98 µm
120 µm
88
—
115 x 115 µm
12 kA
98/1/1 Al/Cu/Si
PST2
150 x 150 mils
457 µm, 18 mil
102 µm
152 µm
130 µm
160 µm
21
—
165 x 165 µm
40 kA
98/1/1 Al/Cu/Si
Packaging
Uncut Wafer*
Tray
Tape and Reel
5" Wafer
250 x 250 mils
(243 Die)
5" Wafer
500 x 500 mils
(48 Die)
Sawed 5" Wafer
25 per tray 2" sq
Waffle Pack
Sawed 5" Wafer
6 per tray 2" sq
Waffle Pack
.400 Pitch
Tack Tape
12mm Width
.600 Pitch
Tack Tape
24mm Width
5" Wafer
200 x 200 mils
(379 Die)
400 x 400 mils
(86 Die)
5" Wafer
200 x 200 mils
(379 Die)
400 x 600 mils
(50 Die)
5" Wafer
150 x 150 mils
(682 Die)
Sawed 5" Wafer
Sawed 5" Wafer
Sawed 5" Wafer
36 per tray 200 x 200 36 per tray 200 x 200 25 per tray 2" sq
Waffle Pack
9 per tray 400 x 400 9 per tray 400 x 600
Waffle Pack
Waffle Pack
.400 Pitch
Tack Tape
12mm Width
.400 Pitch
Tack Tape
12mm Width
Call For
Availability
*Note: Die count represents expected yield per wafer.
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
15
Flip Chip Test Boards
Laminate Board
Laminate board is double-sided board. One
side has 10 pads for the FB250, the other side
has 10 pads for the FB500.
Ceramic Board
Ceramic board is single sided. FB250 ceramic
board has 10 pads on one side. The FB500
ceramic board has 10 pads on one side.
Order Number: FB250-PCB
Top view
Order Number: FB500-PCB
Bottom view
16
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
Flip Chip Test Boards
Laminate Board
Laminate board is double-sided board. One
side has 10 pads for the PB8-2x2, the other
side has 10 pads for the PB8-4x6.
Ceramic Board
Ceramic board is not available.
Order Number: PB8-2x2-PCB
Top view
Order Number: PB8-4x6-PCB
Bottom view
Laminate Board
Laminate is only available for FA10-2x2.
Ceramic Board
Ceramic is not available.
Order Number: FA10-2x2-PCB
Top view only
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
17
QFP
Plastic Quad Flat Pack
Part Number
QFP44-10mm-.8mm-3.2
QFP44-10mm-.8mm-3.9
QFP64-14mm-.8mm-3.2
QFP64-14x20mm-1.0mm-3.2
QFP64-14x20mm-1.0mm-3.9
QFP80-14x20mm-.8mm-3.2
QFP80-14x20mm-.8mm-3.9
QFP100-14x20mm-.65mm-3.2
QFP100-14x20mm-.65mm-3.9
QFP120-28mm-.8mm-3.2
QFP120-28mm-.8mm-3.9
QFP160-28mm-.65mm-3.2
QFP160-28mm-.65mm-3.9
QFP208-28mm-.5mm-2.6
QFP240-32mm-.5mm-2.6
QFP256-28mm-.4mm-2.6
QFP304-40mm-.5mm-2.6
Number
of Pins
44
44
64
64
64
80
80
100
100
120
120
160
160
208
240
256
304
Body Size
Lead Pitch
Footprint
10mm sq
10mm sq
14mm sq
14 x 20mm
14 x 20mm
14 x 20mm
14 x 20mm
14 x 20mm
14 x 20mm
28mm sq
28mm sq
28mm sq
28mm sq
28mm sq
32mm sq
28mm sq
40mm sq
.8mm
.8mm
.8mm
1.0mm
1.0mm
.8mm
.8mm
.65mm
.65mm
.8mm
.8mm
.65mm
.65mm
.5mm
.5mm
.4mm
.5mm
3.2mm
3.9mm
3.2mm
3.2mm
3.9mm
3.2mm
3.9mm
3.2mm
3.9mm
3.2mm
3.9mm
3.2mm
3.9mm
2.6mm
2.6mm
2.6mm
2.6mm
Notes
Quantity
Per Tray
90/96
90/96
84
50/66
50/66
50/66
50/66
50/66
50/66
24
24
24
24
24
24
24
12
Tape
Width
24mm
24mm
32mm
44mm
44mm
44mm
44mm
44mm
44mm
44mm
44mm
44mm
44mm
44mm
—
44mm
—
Tape
Pitch
24mm
24mm
24mm
32mm
32mm
32mm
32mm
32mm
32mm
40mm
40mm
40mm
40mm
40mm
—
40mm
—
Quantity
Per Reel
500
500
350
350
350
350
350
200
200
200
200
200
200
200
N/A
200
N/A
Part Number System
All QFPs are standard in JEDEC trays.
Tray quantities may vary.
Quad
Flat Pack
QFP44–10mm–.8mm–3.9mm
Number of Pins
Body
Size
Lead
Footprint
Lead Pitch
Add “TR” to end of part number for Tape and Reel.
D
D1
D2
A
A1
A2
-B-
E
E1
E2
-A-
0.10 s
-D-
4X
e
θ1
b
θ
-C- Seating Plane
0.10 C
θ2
R1
R2
-HGage Plane
S
θ3
18
aaa C A-B D
bbb C A-B D
4X
ccc M C A-B S D S
L
0.25mm
L1
c
QFP44-10mm-.8mm-3.2mm
QFP44-10mm-.8mm-3.9mm
Millimeter
Inch
Millimeter
Inch
Min Nom Max Min Nom Max
Min Nom Max Min Nom Max
— 0.100 A — — 2.45 —
— 0.096
A — — 2.55 —
A1 0.15 0.25 0.35 0.006 0.010 0.014 A1 0.15 0.25 0.35 0.006 0.010 0.014
A2 1.80 2.05 2.20 0.071 0.081 0.087 A2 1.95 2.05 2.10 0.077 0.081 0.083
13.20 BSC.
0.520 BSC.
13.90 BSC.
0.547 BSC.
D
D
10.00 BSC.
0.394 BSC.
10.00 BSC.
0.394 BSC.
D1
D1
13.20 BSC.
0.520 BSC.
13.90 BSC.
0.547 BSC.
E
E
10.00 BSC.
0.394 BSC.
10.00 BSC.
0.394 BSC.
E1
E1
R2 0.13 — 0.30 0.005 — 0.012 R2 0.13 — 0.30 0.005 — 0.012
— R1 0.13 — — 0.005 —
—
R1 0.13 — — 0.005 —
0º
—
7º
0º
3.5º
7º
θ 0º — 7º
θ 0º 3.5º 7º
0º
—
— θ1 0º — —
0º
—
—
θ1 0º — —
10º Ref
10º Ref
10º Ref
10º Ref
θ2
θ2
7º Ref
7º Ref
7º Ref
7º Ref
θ3
θ3
c 0.11 0.15 0.23 0.004 0.006 0.009 c 0.11 0.15 0.23 0.004 0.006 0.009
L 0.73 0.88 1.03 0.029 0.035 0.041 L 0.73 0.88 1.03 0.029 0.035 0.041
1.60
0.063
1.95 Ref
0.077 Ref
L1
L1
—
—
S 0.20 — — 0.008 —
S 0.40 — — 0.016 —
b 0.30 0.35 0.45 0.012 0.014 0.018 b 0.30 0.35 0.45 0.012 0.014 0.018
0.80 BSC.
0.031 BSC.
0.80 BSC.
0.031 BSC.
e
e
8.00
0.315
8.0
0.315
D2
D2
8.00
0.315
8.0
0.315
E2
E2
Tolerances of Form and Position
Tolerances of Form and Position
0.25
0.010
0.25
0.010
aaa
aaa
0.20
0.008
0.20
0.008
bbb
bbb
— 0.008 — ccc — 0.20 —
— 0.008 —
ccc — 0.20 —
Note: Control dimensions are in millimeters.
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
QFP
A
D
D1
D2
A1
0.10 s
A2
-D-
E
E1
E2
-A-
-B-
QFP64-14x20mm-1.0mm-3.2mm
QFP64-14x20mm-1.0mm-3.9mm
Millimeter
Inch
Millimeter
Inch
Min Nom Max Min Nom Max
Min Nom Max Min Nom Max
— — 3.40 —
— 0.134 A
— — 3.40 —
— 0.134
A
—
A1 0.25 — — 0.010 —
A1 0.15 0.25 0.35 0.006 0.010 0.014
A2 2.50 2.72 2.90 0.098 0.107 0.114 A2 2.55 2.72 3.05 0.100 0.107 0.120
23.20 BSC.
0.913 BSC.
23.90 BSC.
0.941 BSC.
D
D
20.00 BSC.
0.787 BSC.
20.00 BSC.
0.787 BSC.
D1
D1
17.90 BSC.
0.677 BSC.
17.90 BSC.
0.705 BSC.
E
E
14.00 BSC.
0.551 BSC.
14.00 BSC.
0.551 BSC.
E1
E1
aaa C A-B D
4X
L1
R2 0.13 — 0.30 0.005 — 0.012 R2 0.13 — 0.30 0.005 — 0.012
bbb C A-B D
4X
—
—
R1 0.13 — — 0.005 —
R1 0.13 — — 0.005 —
c
ccc M C A-B S D S
0º — 7º 0º
—
7º
0º 3.5º 7º 0º 3.5º 7º
θ
θ
0º — — 0º
—
—
—
—
θ1
θ1 0º — — 0º
7º Ref
7º Ref
7º Ref
7º Ref
Alloy 42 L/F θ2, θ3
θ2, θ3
-C15º Ref
15º Ref
15º Ref
15º Ref
Copper L/F θ2, θ3
θ2, θ3
ddd C
c 0.11 0.15 0.23 0.004 0.006 0.009 c 0.11 0.15 0.23 0.004 0.006 0.009
Seating Plane
L 0.73 0.88 1.03 0.029 0.035 0.041 L 0.73 0.88 1.03 0.029 0.035 0.041
1.60 Ref
0.063 Ref
1.95 Ref
0.077 Ref
L1
L1
—
—
S 0.20 — — 0.008 —
S 0.40 — — 0.016 —
b 0.35 0.40 0.50 0.014 0.016 0.020 b 0.35 0.40 0.50 0.014 0.016 0.020
1.00 BSC.
0.039 BSC.
1.00 BSC.
0.039 BSC.
e
e
18.00 Ref.
0.709 Ref.
18.00 Ref.
0.709 Ref.
D2
D2
12.00 Ref.
0.472 Ref.
12.00 Ref.
0.472 Ref.
E2
E2
Tolerances of Form and Position
Tolerances of Form and Position
0.25
0.010
0.25
0.010
aaa
aaa
0.20
0.008
0.20
0.008
bbb
bbb
ccc — 0.20 — — 0.008 —
ccc — 0.20 — — 0.008 —
ddd — 0.10 — — 0.004 —
Note: Control dimensions are in millimeters.
e
b
θ1
θ
θ2
R1
R2
-H-
Gage Plane
S
θ3
A
A1
A2
D
D1
E
E1
R2
R1
θ
L
0.25mm
QFP80-14x20mm-.8mm-3.2mm
Millimeter
Inch
Min Nom Max Min Nom Max
— — 3.40 —
— 0.134
0.25 — — 0.010 —
—
2.50 2.72 2.90 0.098 0.107 0.114
23.20 BSC.
0.913 BSC.
20.00 BSC.
0.787 BSC.
17.90 BSC.
0.677 BSC.
14.00 BSC.
0.551 BSC.
0.13 — 0.30 0.005 — 0.012
0.13 — — 0.005 —
—
0º — 7º 0º
—
7º
A
A1
A2
D
D1
E
E1
R2
R1
θ
0º — — 0º
—
—
θ1
θ1
7º Ref
7º Ref
Alloy 42 L/F θ2, θ3
θ2, θ3
15º Ref
15º Ref
Copper L/F θ2, θ3
θ2, θ3
c 0.11 0.15 0.23 0.004 0.006 0.009 c
L 0.73 0.88 1.03 0.029 0.035 0.041 L
1.60 Ref
0.063 Ref
L1
L1
—
S 0.20 — — 0.008 —
S
b 0.30 0.35 0.45 0.012 0.014 0.018 b
0.80 BSC.
0.031 BSC.
e
e
18.40 Ref.
0.724 Ref.
D2
D2
12.00 Ref.
0.472 Ref.
E2
E2
Tolerances of Form and Position
0.25
0.010
aaa
aaa
0.20
0.008
bbb
bbb
ccc — 0.20 — — 0.008 —
ccc
ddd — 0.10 — — 0.004 —
Note: Control dimensions are in millimeters.
QFP80-14x20mm-.8mm-3.9mm
Millimeter
Inch
Min Nom Max Min Nom Max
— — 3.40 —
— 0.134
0.15 0.25 0.35 0.006 0.010 0.014
2.55 2.72 3.05 0.100 0.107 0.120
23.90 BSC.
0.941 BSC.
20.00 BSC.
0.787 BSC.
17.90 BSC.
0.705 BSC.
14.00 BSC.
0.551 BSC.
0.13 — 0.30 0.005 — 0.012
0.13 — — 0.005 —
—
0º 3.5º 7º 0º 3.5º 7º
A
A1
A2
D
D1
E
E1
R2
R1
θ
—
—
θ1
7º Ref
θ2, θ3
15º Ref
15º Ref
θ2, θ3
0.11 0.15 0.23 0.004 0.006 0.009 c
0.73 0.88 1.03 0.029 0.035 0.041 L
1.95 Ref
0.077 Ref
L1
0.40 — — 0.016 —
—
S
0.30 0.35 0.45 0.012 0.014 0.018 b
0.80 BSC.
0.031 BSC.
e
18.40 Ref.
0.724 Ref.
D2
12.00 Ref.
0.472 Ref.
E2
Tolerances of Form and Position
0.25
0.010
aaa
0.20
0.008
bbb
— 0.20 — — 0.008 —
ccc
ddd
0º
— —
7º Ref
0º
QFP100-14x20mm-.65mm-3.2mm
Millimeter
Inch
Min Nom Max Min Nom Max
— — 3.40 —
— 0.134
0.25 — — 0.010 —
—
2.50 2.72 2.90 0.098 0.107 0.114
23.20 BSC.
0.913 BSC.
20.00 BSC.
0.787 BSC.
17.90 BSC.
0.677 BSC.
14.00 BSC.
0.551 BSC.
0.13 — 0.30 0.005 — 0.012
0.13 — — 0.005 —
—
0º — 7º 0º
—
7º
A
A1
A2
D
D1
E
E1
R2
R1
θ
—
—
θ1
7º Ref
θ2, θ3
15º Ref
15º Ref
θ2, θ3
0.11 0.15 0.23 0.004 0.006 0.009 c
0.73 0.88 1.03 0.029 0.035 0.041 L
1.60 Ref
0.063 Ref
L1
0.20 — — 0.008 —
—
S
0.22 0.30 0.38 0.009 0.012 0.015 b
0.65 BSC.
0.026 BSC.
e
18.85 Ref.
0.742
D2
12.35 Ref.
0.486
E2
Tolerances of Form and Position
0.25
0.010
aaa
0.20
0.008
bbb
— 0.13 — — 0.005 —
ccc
— 0.10 — — 0.004 —
0º
— —
7º Ref
0º
QFP100-14x20mm-.65mm-3.9mm
Millimeter
Inch
Min Nom Max Min Nom Max
— — 3.40 —
— 0.134
0.15 0.25 0.35 0.006 0.010 0.014
2.55 2.72 3.05 0.100 0.107 0.120
23.90 BSC.
0.941 BSC.
20.00 BSC.
0.787 BSC.
17.90 BSC.
0.705 BSC.
14.00 BSC.
0.551 BSC.
0.13 — 0.30 0.005 — 0.012
0.13 — — 0.005 —
—
0º 3.5º 7º 0º 3.5º 7º
0º
— —
7º Ref
0º
—
—
7º Ref
15º Ref
15º Ref
0.11 0.15 0.23 0.004 0.006 0.009
0.73 0.88 1.03 0.029 0.035 0.041
1.95 Ref
0.077 Ref
0.40 — — 0.016 —
—
0.22 0.30 0.38 0.009 0.012 0.015
0.65 BSC.
0.026 BSC.
18.85 Ref.
0.742 Ref.
12.35 Ref.
0.486 Ref.
Tolerances of Form and Position
0.25
0.010
0.20
0.008
— 0.12 — — 0.005 —
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
19
QFP
D
D1
D2
A
A2
A1
E
E1
E2
-B-
-A-
0.10 s
-D-
4X
e
θ1
aaa C A-B D
4X
bbb C A-B D
L1
c
ccc M C A-B S D S
b
θ
-C- Seating Plane
0.10 C
θ2
R1
R2
-H-
Gage Plane
S
θ3
QFP120-28mm-.8mm-3.2mm
Millimeter
Inch
Min Nom Max Min Nom Max
— — 4.10 —
— 0.161
0.25 — — 0.010 —
—
3.20 3.32 3.60 0.126 0.131 0.142
31.20 BSC.
1.228 BSC.
28.00 BSC.
1.102 BSC.
31.20 BSC.
1.228 BSC.
28.00 BSC.
1.102 BSC.
0.13 — 0.30 0.005 — 0.012
0.13 — — 0.005 —
—
0º — 7º
0º
—
7º
0º — —
0º
—
—
8º Ref
8º Ref
8º Ref
8º Ref
0.11 0.15 0.23 0.004 0.006 0.009
0.73 0.88 1.03 0.029 0.035 0.041
1.60 Ref
0.063 Ref
0.20 — — 0.008 —
—
0.30 0.35 0.45 0.012 0.014 0.018
0.80 BSC.
0.031 BSC.
23.20
0.913
23.20
0.913
Tolerances of Form and Position
0.25
0.010
0.20
0.008
— 0.20 — — 0.008 —
L
0.25mm
QFP120-28mm-.8mm-3.9
Millimeter
Inch
Min Nom Max Min Nom Max
— 0.160
A
A — — 4.07 —
A1
A1 0.15 0.25 0.35 0.006 0.010 0.014
A2
A2 3.17 3.32 3.67 0.125 0.131 0.144
31.90 BSC.
1.256 BSC.
D
D
28.00 BSC.
1.102 BSC.
D1
D1
31.90 BSC.
1.256 BSC.
E
E
28.00 BSC.
1.102 BSC.
E1
E1
R2
R2 0.13 — 0.30 0.005 — 0.012
—
R1
R1 0.13 — — 0.005 —
0º
3.5º
7º
θ
θ 0º 3.5º 7º
0º
—
—
θ1
θ1 0º — —
8º Ref
8º Ref
θ2
θ2
8º Ref
8º Ref
θ3
θ3
c
c 0.11 0.15 0.23 0.004 0.006 0.009
L
L 0.73 0.88 1.03 0.029 0.035 0.041
1.95 Ref
0.077 Ref
L1
L1
—
S
S 0.40 — — 0.016 —
b
b 0.30 0.35 0.45 0.012 0.014 0.018
0.80 BSC.
0.031 BSC.
e
e
23.20
0.913
D2
D2
23.20
0.913
E2
E2
Tolerances of Form and Position
0.25
0.010
aaa
aaa
0.20
0.008
bbb
bbb
ccc
ccc — 0.10 — — 0.004 —
ddd — 0.20 — — 0.008 —
Note: Control dimensions are in millimeters.
20
A
A1
A2
D
D1
E
E1
R2
R1
θ
θ1
θ2
θ3
c
L
L1
S
b
e
D2
E2
aaa
bbb
ccc
QFP160-28mm-.65mm-3.2
Millimeter
Inch
Min Nom Max Min Nom Max
— — 4.10 —
— 0.161
0.25 — — 0.010 —
—
3.20 3.32 3.60 0.126 0.131 0.142
31.20 BSC.
1.228 BSC.
28.00 BSC.
1.102 BSC.
31.20 BSC.
1.228 BSC.
28.00 BSC.
1.102 BSC.
0.13 — 0.30 0.005 — 0.012
0.13 — — 0.005 —
—
0º — 7º
0º
—
7º
0º — —
0º
—
—
8º Ref
8º Ref
8º Ref
8º Ref
0.11 0.15 0.23 0.004 0.006 0.009
0.73 0.88 1.03 0.029 0.035 0.041
1.60 Ref
0.063 Ref
0.20 — — 0.008 —
—
0.22 0.30 0.38 0.009 0.012 0.015
0.65 BSC.
0.026 BSC.
25.35
0.998
25.35
0.998
Tolerances of Form and Position
0.25
0.010
0.20
0.008
— 0.13 — — 0.005 —
A
A1
A2
D
D1
E
E1
R2
R1
θ
θ1
θ2
θ3
c
L
L1
S
b
e
D2
E2
aaa
bbb
ccc
ddd
QFP160-28mm-.65mm-3.9
Millimeter
Inch
Min Nom Max Min Nom Max
— — 4.07 —
— 0.160
0.15 0.25 0.35 0.006 0.010 0.014
3.17 3.32 3.67 0.125 0.131 0.144
31.90 BSC.
1.256 BSC.
28.00 BSC.
1.102 BSC.
31.90 BSC.
1.256 BSC.
28.00 BSC.
1.102 BSC.
0.13 — 0.30 0.005 — 0.012
0.13 — — 0.005 —
—
0º 3.5º 7º
0º
3.5º
7º
0º — —
0º
—
—
8º Ref
8º Ref
8º Ref
8º Ref
0.11 0.15 0.23 0.004 0.006 0.009
0.73 0.88 1.03 0.029 0.035 0.041
1.95 Ref
0.077 Ref
0.40 — — 0.016 —
—
0.22 0.30 0.38 0.009 0.012 0.015
0.65 BSC.
0.026 BSC.
25.35
0.998
25.35
0.998
Tolerances of Form and Position
0.25
0.010
0.20
0.008
— 0.10 — — 0.004 —
— 0.12 — — 0.005 —
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
LQFP
Low Profile Quad Flat Pack
Part Number
LQFP32-7mm-.8mm-2.0
LQFP48-7mm-.5mm-2.0
LQFP64-14mm-.8mm-2.0
LQFP64-10mm-.5mm-2.0
LQFP80-10mm-.4mm-2.0
LQFP80-12mm-.5mm-2.0
LQFP80-14mm-.65mm-2.0
LQFP100-14mm-.5mm-2.0
LQFP100-14x20mm-.65mm-2.0
LQFP120-14mm-.4mm-2.0
LQFP144-20mm-.5mm-2.0
LQFP168-14mm-.3mm-2.0
LQFP176-20mm-.4mm-.2.0
LQFP176-24mm-.5mm-2.0
LQFP208-28mm-.5mm-2.0
LQFP256-28mm-.4mm-2.0
Number
of Pins
32
48
64
64
80
80
80
100
100
120
144
168
176
176
208
256
Body Size
Lead Pitch
Footprint
7mm sq
7mm sq
14mm sq
10mm sq
10mm sq
12mm sq
14mm sq
14mm sq
14 x 20mm
14mm sq
20mm sq
14mm sq
20mm sq
24mm sq
28mm sq
28mm sq
.8mm
.5mm
.8mm
.5mm
.4mm
.5mm
.65mm
.5mm
.65mm
.4mm
.5mm
.3mm
.4mm
.5mm
.5mm
.4mm
2.0mm
2.0mm
2.0mm
2.0mm
2.0mm
2.0mm
2.0mm
2.0mm
2.0mm
2.0mm
2.0mm
2.0mm
2.0mm
2.0mm
2.0mm
2.0mm
Quantity
Per Tray
250
250
90
160
160
90
90
90
90
90
60
90
60
40
36
36
Notes
Part Number System
All LQFPs are standard in trays.
LQFPs have a body thickness of 1.4mm.
Tray quantity may vary.
Low Profile
Quad Flat Pack
Tape
Width
16mm
16mm
32mm
24mm
24mm
24mm
32mm
32mm
44mm
32mm
44mm
32mm
44mm
44mm
44mm
44mm
Tape
Pitch
12mm
12mm
24mm
24mm
24mm
20/24mm
24mm
24mm
24mm
24mm
24mm
24mm
24mm
32mm
40mm
40mm
LQFP48–7mm–.5mm–2.0
Body
Size
Number of Pins
Quantity
Per Reel
1,000
1,000
1,000
1,000
1,000
1,000
1,000
750
500
750
750
500
500
500
500
500
Lead
Footprint
Lead Pitch
Add “TR” to end of part number for Tape and Reel.
QFN
Quad Flat Pack Non-Leaded
Number
of Pads
48
Part Number
QFN48-7.15x7.15mm-.5mm
Body Size
Pitch
7.15 x 7.15mm
.5mm
Part Number System
Quad Flat Pack
Non-Leaded
QFN48-7.15x7.15mm-.5mm
Body Size
Pad Count
Top View
7.15 Max
7.00±0.05
2.50
0.05 Max
CO 35
48
48
ø1.0
7.15 Max
2.50
A
0.25±0.10
Typ
36
0.10 Max
7.00±0.05
A
Bottom View
1
1
36
Pitch
01
JAPAN
A1
ø2.00
0.50
12
3RO 3
24
Surface Roughness: 6±2µm(RZ)
A
12
24
0.75 Typ
0.80±0.05
10° Typ
0.1
3° Typ
0.20±0.06
⊕ 0.13 M
0.125±0.030
RO 15
Typ
0.225
Detail A
Section A-A
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
21
BQFP
Bumpered Quad Flat Pack
Part Number
BQFP100-22.6mm-.636mm
BQFP132-27.7mm-.636mm
Number
of Pins
100
132
Body Size
Lead Pitch
22.6mm
27.7mm
.636mm
.636mm
Notes
Part Number System
BQFPs are packaged in JEDEC trays.
Call for tape and reel quantity and availability.
BQFP packages are expected to be phased out (obsolete) due
to low demand. Please call for availability.
Bumpered Quad
Flat Pack
BQFP100–22.6mm–.636mm
Lead
Pitch
Body Size
Number of Pins
Z
C
G
Y
Y
D
E
X
B
Y
W
X
E
D G
C
Z
A
Full Radius Optional
Grid
Placement
Courtyard
H
T
S
L
BQFP Component Dimensions
Component
Identifier
BQFP 100
BQFP 132
L (mm)
Min
Max
22.10
22.60
27.20
27.20
S (mm)
Min
Max
20.10
20.71
25.25
25.81
W (mm)
Min
Max
0.20
0.30
0.20
0.30
T (mm)
Min
Max
0.75
1.00
0.75
1.00
A (mm)
Max
19.35
24.20
B (mm)
Max
19.35
24.20
E (mm)
Basic
0.635
0.635
H (mm)
Max
4.57
4.57
BQFP Land Pattern Dimensions
Component
Identifier
BQFP 100
BQFP 132
22
Z (mm)
G (mm)
X (mm
23.20
28.20
19.60
24.60
0.35
0.35
Y (mm)
Ref
1.80
1.80
C (mm)
Ref
21.40
26.40
D (mm)
Ref
15.24
20.32
E (mm)
Basic
0.63
0.63
Placement Grid
(No. of Grid Elements)
50 x 50
58 x 58
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
CQFP
Ceramic Quad Flat Pack
Part Number
52CQFP-19.0mm-1.27mm
68CQFP-24.1mm-1.27mm
84CQFP-16.5mm-.65mm
100CQFP-19.0mm-.65mm
132CQFP-24.1mm-.65mm
144CQFP-26.6mm-.65mm
172CQFP-29.2mm-.65mm
196CQFP-32.0mm-.50mm
Number
of Pins
52
68
84
100
132
144
172
196
Notes
CQPFs are available with or without combo lid.
Pins are flat (sandwiched) with tie bar.
Parts are packaged in non-JEDEC trays.
Due to the custom nature of the package, body size and
dimensions can change without notice.
Body Width
Lead Pitch
19.0mm sq
24.1mm sq
16.5mm sq
19.0mm sq
24.1mm sq
26.6mm sq
29.2mm sq
32.0mm sq
1.27mm
1.27mm
.65mm
.65mm
.65mm
.65mm
.65mm
.50mm
Part Number System
52CQFP–19.0mm–1.27mm
I/O Count
Ceramic Quad
Flat Pack
Lead Pitch
Body Size
LCC
Leadless Ceramic Carrier
Part Number
16LCC-1.27mm-7.36x8.96mm
20LCC-1.27mm-8.90mm
28LCC-1.27mm-11.5mm
32LCC-1.27mm-11.4x14.0mm
32LCC-1.27mm-11.4x16.5mm
40LCC-1.00mm-10.1mm
48LCC-1.00mm-14.2mm
52LCC-1.27mm-19.0mm
68LCC-1.27mm-24.11mm
84LCC-1.27mm-29.2mm
Number of
Castellations
16
20
28
32
32
40
48
52
68
84
Pitch
Body Size
1.27mm
1.27mm
1.27mm
1.27mm
1.27mm
1.00mm
1.00mm
1.27mm
1.27mm
1.27mm
7.36 x 8.96mm
8.90mm sq
11.5mm sq
11.4 x 14.0mm
11.4 x 16.5mm
10.1mm sq
14.2mm sq
19.0mm sq
24.11mm sq
29.2mm sq
Notes
Part Number System
Number of
Body Size
20LCC–1.27mm–8.90mm
Castellations
Leadless
Castellation Pitch
Ceramic Carrier
LCCs are available with or without combo lid.
Gold castellations are standard, but can be solder coated.
Parts are packaged in non-JEDEC trays.
Parts are available with a daisy-chain configuration
upon request.
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
23
SOIC
Small Outline Integrated Circuit
Part Number
SO8GT-3.8mm
SO14GT-3.8mm
SO16GT-3.8mm
SO16GT-7.6mm
SO20GT-7.6mm
SO28GT-7.6mm
SO32GT-7.6mm
SO20/26JT-7.6mm
SO28JT-7.6mm
SO40JT-10mm
Number
of Pins
8
14
16
16
20
28
32
20/26
28
40
Lead
Style
Gull
Gull
Gull
Gull
Gull
Gull
Gull
J-Lead
J-Lead
J-Lead
Body
Width
3.8mm
3.8mm
3.8mm
7.6mm
7.6mm
7.6mm
7.6mm
7.6mm
7.6mm
10.0mm
Quantity
Per Tube
99
50
50
46
38
25
25
25
27
17
Part Number
(Tape and Reel)
SO8GTR-3.8mm
SO14GTR-3.8mm
SO16GTR-3.8mm
SO16GTR-7.6mm
SO20GTR-7.6mm
SO28GTR-7.6mm
SO32GTR-7.6mm
SO20/26JTR-7.6mm
SO28JTR-7.6mm
SO40JTR-10mm
Notes
Part Number System
Standard lead pitch is 1.27mm.
Tube quantity may vary.
Small Outline
Integrated Circuit
Tape
Width
12mm
16mm
16mm
16mm
24mm
24mm
Tape
Pitch
8mm
8mm
8mm
12mm
12mm
12mm
24mm
24mm
44mm
12mm
12mm
16mm
Quantity
Per Reel
2,500
2,500
2,500
1,000
1,000
1,000
1,000
1,000
1,000
500
SO14GT–3.8mm
Body Size
Packaging
Lead Style
Number of Pins
Lead Style: G=Gull Wing, J=J-Leaded
Packaging: T= Tubes, TR=Tape and Reel
B
D
Grid
Placement
Courtyard
A
P
W
S
L
C
G
Z
H
E
X
Y
SOIC Component Dimensions
Component
Identifier
SO8
SO14
SO16
SO16-7.6mm
SO20-7.6mm
SO28-7.6mm
JEDEC
Number
MS-012 AA
MS-012 AB
MS-012 AC
MS-013 AA
MS-013 AC
MO-119 AB
L (mm)
Min
Max
5.80
6.30
5.80
6.30
5.80
6.30
10.00 10.65
10.00 10.65
10.29 10.64
S (mm)
Min
Max
3.26
4.55
3.26
4.55
3.26
4.55
7.46
8.85
7.46
8.85
8.21
9.01
W (mm)
Min
Max
0.33
0.51
0.33
0.51
0.33
0.51
0.33
0.51
0.33
0.51
0.36
0.51
T (mm)
Min
Max
0.40
1.27
0.40
1.27
0.40
1.27
0.40
1.27
0.40
1.27
0.53
1.04
Y (mm)
Ref
2.20
2.20
2.20
2.20
2.20
2.20
C (mm)
Ref
5.20
5.20
5.20
9.20
9.20
9.20
A (mm)
Min
Max
3.80
4.00
3.80
4.00
3.80
4.00
7.40
7.60
7.40
7.60
7.40
7.60
B (mm)
Min
Max
4.80
5.00
8.55
8.75
9.80 10.00
10.10 10.50
12.60 13.00
18.08 18.39
H (mm)
Min
Max
1.35
1.75
1.35
1.75
1.35
1.75
2.35
2.65
2.35
2.65
2.34
2.64
P (mm)
Basic
1.27
1.27
1.27
1.27
1.27
1.27
SOIC Land Pattern Dimensions
Component
Identifier
SO8
SO14
SO16
SO16-7.6mm
SO20-7.6mm
SO28-7.6mm
24
Z (mm)
G (mm)
X (mm)
7.40
7.40
7.40
11.40
11.40
11.40
3.00
3.00
3.00
7.00
7.00
7.00
0.60
0.60
0.60
0.60
0.60
0.60
D (mm)
Ref
3.81
7.62
8.89
8.89
11.43
16.51
E (mm)
Ref
1.27
1.27
1.27
1.27
1.27
1.27
Placement Grid
(No. of Grid Elements)
12 x 16
20 x 16
22 x 16
22 x 22
28 x 24
38 x 24
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
TSOP
Thin Small Outline Package – Type I
Part Number
TI-TSOP20/24-6x14.4mm-.5mm
TI-TSOP28-8.1x11.8mm-.55mm
TI-TSOP28/32-8x18.4mm-.5mm
TI-TSOP32-8x18.4mm-.5mm
TI-TSOP40-10x18.4mm-.5mm
TI-TSOP48-12x18.4mm-.5mm
Number
of Pins
20/24
28
28/32
32
40
48
Lead
Pitch
.5mm
.55mm
.5mm
.5mm
.5mm
.5mm
Body Size
6 x 14.4mm
8.1 x 11.8mm
8 x 18.4mm
8 x 18.4mm
10 x 18.4mm
12 x 18.4mm
Quantity
Per Tray
240
234
156
156
120
96
Tape
Width
24mm
24mm
32mm
32mm
32mm
32mm
Tape
Pitch
12mm
12mm
12/16mm
12/16mm
16mm
16mm
Quantity
Per Reel
1,000
1,000
1,000
1,000
1,000
1,000
Thin Small Outline Package – Type II
Part Number
TII-TSOP20/26-7.6x17.14mm-1.27mm
TII-TSOP24/26-7.6x17.14mm-1.27mm
TII-TSOP24/28-10.16x18.41mm-1.27
TII-TSOP26-7.6mmx17.14mm-1.27mm
TII-TSOP32-10.16x20.95mm-1.27mm
TII-TSOP40/44-10.16x18.42mm-.8mm
TII-TSOP44-10.16x18.42mm-.8mm
TII-TSOP50-10.16x20.95mm-.8mm
TII-TSOP54-10.16x22.22mm-.8mm
TII-TSOP54-12.7x22.22mm-.8mm
Number
of Pins
20/26
24/26
24/28
26
32
40/44
44
50
54
54
Body Size
7.6 x 17.14mm
7.6 x 17.14mm
10.16 x 18.41mm
7.6 x 17.14mm
10.16 x 20.95mm
10.16 x 18.42mm
10.16 x 18.42mm
10.16 x 20.95mm
10.16 x 22.22mm
12.7 x 22.22mm
Notes
Standard packaging is in JEDEC trays or tape and reel
(quantities may vary).
Body dimensions are measured by body length and width.
Type I means that pins extend from the narrow end (the width)
of the body.
Type II means that pins extend from the wide end (the length)
of the body.
Lead
Pitch
1.27mm
1.27mm
1.27mm
1.27mm
1.27mm
.8mm
.8mm
.8mm
.8mm
.8mm
Quantity
Per Tray
176
176
100
176
117
135
135
117
108
84
Tape
Width
24mm
24mm
32mm
24mm
32mm
32mm
32mm
32mm
44mm
44/32mm
Tape
Pitch
12mm
12mm
16mm
12mm
16mm
16mm
16mm
16mm
20mm
20mm
Part Number System
Type I or Type II TI–TSOP28–8.1x11.8mm–.5mm
Thin Small
Outline Package
Number
of Pins
Quantity
Per Reel
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Lead
Pitch
Body Size
Add “T” to end of part number for Tray.
Add “TR” to end of part number for Tape and Reel.
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
25
SSOP
Small Shrink Outline Package
Number
of Pins
8
14
16
20
24
28
48
56
64
Part Number
SSOP8T-5.3mm
SSOP14T-5.3mm
SSOP16T-5.3mm
SSOP20T-5.3mm
SSOP24T-5.3mm
SSOP28T-5.3mm
SSOP48T-7.6mm
SSOP56T-7.6mm
SSOP64T-10.2mm
Body Width
5.3mm
5.3mm
5.3mm
5.3mm
5.3mm
5.3mm
7.6mm
7.6mm
10.2mm
Quantity
Per Tube
156
100
80
62
66
47
30
26
—
Notes
Tape Width
Tape Pitch
12mm
12/16mm
12/16mm
16mm
16mm
16/24mm
32mm
32mm
44mm
8mm
12mm
12mm
12mm
12mm
12mm
12/16mm
12/16mm
16/24mm
Quantity
Per Reel
2,500
1,000
1,000
1,000
1,000
1,000
1,000
500
500
Part Number System
Standard lead pitch is 0.65mm.
Standard body width is 5.3mm.
Tube quantity may vary.
Small Shrink
Outline Package
Body Width
SSOP20T–5.3mm
Number of Pins
Packaging
Packaging: T= Tubes, TR=Tape and Reel
SSOP8T-5.3mm to SSOP28T-5.3mm
1.14 Dia
.152 DP Max
Dia. Pin Y236
.125 DP Max
1.14
1.14
E1
E
Top View
Bottom View
e
Datum Plane
A1
A
A2
Base Plane
Seating Plane
End View
5
b
C
D
2
Side View
A
8°±1° Typical
Base
Metal
b1
With Lead
Finish
7°±5°
c
c1
R
B
Gauge Plane
0.25
D
b
Section BB
Seating Plane
Note: All dimensions are in millimeters.
B
Detail A
3
L
1.25 Ref
(.049")
1. Dimensions and tolerancing per ANSI Y14.5M-1982.
2. “D” and “E1” are reference datums and do not include mold deflash or
protrusions, but do include mold mismatch and are measured at the parting
line. Mold deflash or protrusions shall not exceed 0.15 (.006") per side. End
flash from the package body shall not exceed 0.15 (.006") per side (D).
3. Dimension “L” is the length of terminal for soldering to a substrate.
4. “N” is the number of terminal positions.
5. Formed leads shall be planar with respect to one another within 0.10
(.004") at seating plane.
6. Dimension “b” does not include dambar protrusion/intrusion. Dambar
protrusion to be 0.13 (.005") max per side.
A
A1
A2
b
b1
c
c1
D
E
E1
e
L
N
R
Inch
.068
.002
.065
.009
.009
.004
.004
.291
.197
.022
.004
D
Notes:
26
Common Dimension
Nom
Max
mm
Inch
mm
Inch
mm
1.73
.073
1.86
.078
2.00
0.05
.005
0.13
.008
0.20
1.65
.069
1.75
.073
1.85
0.22
.012
0.30
.015
0.38
0.22
.012
0.30
.013
0.33
0.09
.006
0.15
.010
0.25
0.09
.006
0.15
.008
0.21
See The Specific Part Number
7.40
.307
7.80
.323
8.20
5.00
.209
5.30
.221
5.60
.026 Inch 0.65 mm BSC
0.55
.030
0.75
.037
0.95
See The Specific Part Number
0.09
0°
4°
8°
Min
Note
2
2
3
4
D 2
Part
Number
SSOP8T-5.3mm
SSOP14T-5.3mm
SSOP16T-5.3mm
SSOP20T-5.3mm
SSOP24T-5.3mm
SSOP28T-5.3mm
4
N
8
14
16
20
24
28
Min
Inch
.106
.232
.232
.271
.311
.390
Nom
mm
2.70
5.90
5.90
6.90
7.90
9.90
Inch
.118
.244
.244
.283
.323
.402
mm
3.00
6.20
6.20
7.20
8.20
10.20
Max
Inch
.130
.256
.256
.295
.334
.413
mm
3.30
6.50
6.50
7.50
8.50
10.50
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
SSOP
0.010" C A—B S D S
-B48
25
0.010°
E1 E
θ
Gauge Plane
L
1
24
-A-
b
-D-
Detail F
0.007" M C A—B S D S
D
c
A2 A
Seating Plane
-Ce
L1
A1
0.004" C
SSOP 48T-7.6mm
See Detail F
Notes:
Min
2.41
0.20
2.26
0.20
0.13
15.75
7.39
1. Dimension D does not include mold flash, protrusions or gate burs. Mold
flash protrusions or gate burs shall not exced 0.006 per side.
2. Dimension E1 does not include interlead flash or prorusion. Interlead flash
or protrusion shall not exceed 0.015 per side.
Millimeter
Nom
2.59
0.30
2.39
0.25
0.20
15.88
7.49
0.64 BSC
10.31
0.76
1.42
Max
2.79
0.40
2.52
0.34
0.25
16.00
7.59
A
A1
A2
b
c
D
E1
e
10.03
10.67
E
0.51
1.02
L
L1
0°
8°
θ
Note: Controlling Dimension — Inch
0.010" C A—B S D S
Min
0.095
0.008
0.089
0.008
0.005
0.620
0.291
0.395
0.020
Inch
Nom
0.102
0.012
0.094
0.010
0.008
0.625
0.295
0.025 BSC
0.406
0.030
0.056
0°
Max
0.110
0.016
0.099
0.0135
0.010
0.630
0.299
0.420
0.040
8°
-B29
56
0.010°
E1 E
θ
Gauge Plane
L
1
-A-
b
28
-D-
Detail F
0.007" M C A—B S D S
D
c
A2 A
Seating Plane
-Ce
L1
A1
0.004" C
Notes:
1. Dimension D does not include mold flash, protrusions or gate burs. Mold
flash protrusions or gate burs shall not exced 0.006 per side.
2. Dimension E1 does not include interlead flash or prorusion. Interlead flash
or protrusion shall not exceed 0.015 per side.
SSOP 56T-7.6mm
See Detail F
Min
2.41
0.20
2.26
0.20
0.13
18.29
7.39
Millimeter
Nom
2.59
0.30
2.39
0.25
0.20
18.42
7.49
0.64 BSC
10.31
0.76
1.42
Max
2.79
0.40
2.52
0.34
0.25
18.54
7.59
A
A1
A2
b
c
D
E1
e
10.03
10.67
E
0.51
1.02
L
L1
0°
8°
θ
Note: Controlling Dimension — Inch
Min
0.095
0.008
0.089
0.008
0.005
0.720
0.291
0.395
0.020
Inch
Nom
0.102
0.012
0.094
0.010
0.008
0.725
0.295
0.025 BSC
0.406
0.030
0.056
0°
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
Max
0.110
0.016
0.099
0.0135
0.010
0.730
0.299
0.420
0.040
8°
27
TSSOP
Thin Shrink Small Outline Package
Part Number
TSSOP8T-4.4mm
TSSOP14T-4.4mm
TSSOP16T-4.4mm
TSSOP20T-4.4mm
TSSOP24T-4.4mm
TSSOP28T-4.4mm
TSSOP38T-4.4mm
TSSOP48T-6.1mm
TSSOP56T-6.1mm
Number
of Pins
8
14
16
20
24
28
38
48
56
Notes
Body Width
Tape Width
Tape Pitch
4.4mm
4.4mm
4.4mm
4.4mm
4.4mm
4.4mm
4.4mm
6.1mm
6.1mm
12/16mm
12/16mm
12/16mm
16mm
16mm
16mm
16mm
24mm
24mm
8mm
8mm
8mm
8/12mm
8/12mm
8/12mm
8/12mm
12mm
12mm
Quantity
Per Tube
100
96
96
76
63
50
43
39
35
Quantity
Per Reel
1,000/2,500
1,000/2,500
1,000/2,500
1,000/2,500
1,000/2,500
1,000
1,000
1,000
1,000
Part Number System
Standard lead pitch is 0.65mm.
Standard body width is 5.3mm.
Tube quantity may vary.
Thin Shrink Small
Outline Package
TSSOP8T–4.4mm
Number of Pins
Body Width
Packaging
Packaging: T= Tubes, TR=Tape and Reel
28
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
SON
Small Outline Non-Leaded Package
Number
of Pads
20
24
40
46
Part Number
SON20-5.45x7.45mm-.65mm
SON24-5.85x8.05mm-.65mm
SON40-10.10x10.75mm-.5mm*
SON46-10.10x12.00mm-.5mm*
Body Size
Pitch
5.45 x 7.45mm
5.85 x 8.05mm
10.10 x 10.75mm
10.10 x 12.00mm
.65mm
.65mm
.5mm
.5mm
Note
Part Number System
Parts are packaged in trays or tubes.
Small Outline
Non-Leaded
SON20–5.45x7.45mm–.65mm
Package
Body Size
Pad Count
SON 20 Pin
Surface Roughness: 6±2µm(RZ)
Top View
1
20
0.05 Max
10
1.00
Bottom View
0.25±0.06
ø1.0
0.51±0.10
A
0.65
10
0.675 Typ
2.20
1
20
Mark (Cavity)
Top Side
5.45 Max
A
5.30±0.05
A1
1.00
Pitch
0.50±0.10
0.80±0.05
7.45 Max
7.20±0.05
10° Typ
3° Typ
0.1
0.30±0.06
0.13 M
RO 15
Typ
0.125±0.030
0.225
Detail A
Section A-A
Top View
Exposed Pad
SON 24 Pin
Surface Roughness: 6±2µm(RZ)
RO 15
Typ
Bottom View
0.27±0.06
1.00
5.85 Max
2.50
5.60±0.05
3.10
2.20
ø1.0
A1
Mark (Cavity)
Top Side
4-10°
0.65
0.325 Typ
0.50±0.10
1.00
4-10°
0.05 Max
8.05 Max
7.80±0.05
0.50±0.10
0.60±0.05
0.1
0.24±0.06
⊕ 0.13 M
0.125±0.030
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
29
PLCC
Plastic Leaded Chip Carrier
Part Number
(In Tubes)
PLCC20T
PLCC28T
PLCC32T
PLCC44T
PLCC52T
PLCC68T
PLCC84T
Pin Count
Body Size
20
28
32
44
52
68
84
8.8mm
11.4mm
11.4 x 13mm
16.5mm
19.0mm
24.1mm
29.2mm
Quantity
Per Tube
48
38
30
28
24
17
15
Part Number
(Tape and Reel)
PLCC20TR
PLCC28TR
PLCC32TR
PLCC44TR
PLCC52TR
PLCC68TR
PLCC84TR
Notes
Tape Width
Tape Pitch
16mm
24mm
24mm
32mm
32mm
44mm
44mm
12mm
16mm
16mm
24mm
24mm
32mm
36mm
Quantity
Per Reel
1,000
750
750
500
500
250
250
Part Number System
All PLCCs have “J” leads.
13" reels are standard.
Tube quantity may vary.
Standard lead pitch is 1.27mm (50 mils).
PLCCs are to JEDEC standards.
Plastic Leaded Chip Carrier
Packaging
Number of Pins
Packaging: T= Tubes, TR=Tape and Reel
Z
G
A
H
PLCC20T
Y
X
Full Radius Optional
S J L
E
D C
B
P
W
Heel
L
T
Grid
Placement
Courtyard
C
PLCC Component Dimensions
Component
Identifier
PLCC-20
PLCC-28
PLCC-44
PLCC-52
PLCC-68
PLCC-84
L (mm)
Min
Max
9.78 10.03
12.32 12.57
17.40 17.65
19.94 20.19
25.02 25.27
30.10 30.35
S (mm)
Min
Max
5.78
6.53
8.32
9.07
13.40 14.15
15.94 16.69
21.02 21.77
26.10 26.85
W (mm)
Min
Max
0.33
0.53
0.33
0.53
0.33
0.53
0.33
0.53
0.33
0.53
0.33
0.53
T (mm)
Min
Max
1.50
2.00
1.50
2.00
1.50
2.00
1.50
2.00
1.50
2.00
1.50
2.00
A (mm)
Min
Max
8.89
9.04
11.43 11.58
16.51 16.66
19.05 19.20
24.13 24.33
29.21 29.41
B (mm)
Min
Max
8.89
9.04
11.43 11.58
16.51 16.66
19.05 19.20
24.13 24.33
29.21 29.41
J (mm)
Ref
7.87
10.41
15.49
18.03
23.11
28.19
H (mm)
Max
4.57
4.57
4.57
5.08
5.08
5.08
P (mm)
Basic
1.27
1.27
1.27
1.27
1.27
1.27
PLCC Land Patterns
Component
Identifier
PLCC-20
PLCC-28
PLCC-44
PLCC-52
PLCC-68
PLCC-84
30
Z (mm)
G (mm)
X (mm)
10.80
13.40
18.40
21.00
26.00
31.20
6.40
9.00
14.00
16.60
21.60
26.80
0.60
0.60
0.60
0.60
0.60
0.60
Y (mm)
Ref
2.20
2.20
2.20
2.20
2.20
2.20
C (mm)
Ref
8.60
11.20
16.20
18.80
23.80
29.00
D (mm)
Ref
5.08
7.62
12.70
15.24
20.32
25.40
E (mm)
Ref
1.27
1.27
1.27
1.27
1.27
1.27
Placement Grid
(No. of Elements)
24 x 24
30 x 30
40 x 40
44 x 44
54 x 54
66 x 66
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
SMT
Surface Mount Transistors
Part Number
SC90-TR (Supermini)
SOT323-TR
SOT325-TR
SOT326-TR
SOT23-TR
SOT25-TR
SOT26-TR
SOT143-TR
SOT89-TR
SOT223-TR
DPAK(TO-252)-TR
D2PAK(TO-263)-TR
Number
of Pins
3
3
5
6
3
5
6
4
3
3
Body Size
-A1.6mm
2.0mm
2.0mm
2.0mm
2.9mm
2.9mm
2.9mm
2.9mm
4.5mm
6.7mm
6.5mm
10.29mm
Body Leads
-S1.6mm
2.1mm
2.1mm
2.1mm
2.4mm
2.4mm
2.8mm
2.8mm
4.0mm
7.3mm
9.5mm
15.88mm
SC Device
SC-75A
SC-70
SC-88A
SC-88
SC-62
SC-63
Notes
Part Number System
Carrier pack is plastic for surface mount transistors.
Transistor Package
Tape
Width
8mm
8mm
8mm
8mm
8mm
8mm
8mm
8mm
12mm
12mm
16mm
24mm
Tape
Pitch
4mm
4mm
4mm
4mm
4mm
4mm
4mm
4mm
4mm
8mm
8mm
12mm
SOT326–TR
Quantity
Per 7" Reel
3,000
3,000
3,000
3,000
3,000
3,000
3,000
3,000
1,000
1,000
2,500
800/1,000
Packaging
Packaging: T= Tubes, TR=Tape and Reel
S
A
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
31
SMC
Surface Mount Ceramic Capacitors – Plastic Tape
Part Number
0805SMC-PL
1206SMC-PL
1210SMC-PL
1812SMC-PL
1825SMC-PL
Body Size
(Inch)
.08" x .05"
.12" x .06"
.12" x .10"
.18" x .12"
.18" x .25"
Tape Width
(mm)
2.0 x 1.2mm
3.2 x 1.6mm
3.2 x 2.5mm
4.5 x 3.2mm
4.5 x 6.4mm
8mm
8mm
8mm
12mm
12mm
Tape Pitch
4mm
4mm
4mm
8mm
8mm
Quantity
Per 7" Reel
4,000
3,000
3,000
1,100
1,000
Quantity
Bulk Cassette
10,000
5,000
—
Quantity
Per 7" Reel
15,000
10,000
4,000
5,000
4,000
Quantity
Bulk Cassette
50,000
50,000
15,000
10,000
5,000
Surface Mount Ceramic Capacitors – Paper Tape
Part Number
0201SMC-PA
0402SMC-PA
0603SMC-PA
0805SMC-PA
1206SMC-PA
Body Size
(Inch)
.02" x .01"
.04" x .02"
.06" x .03"
.08" x .05"
.12" x .06"
Tape Width
(mm)
0.6 x 0.3mm
1.0 x .05mm
1.5 x .08mm
2.0 x 1.2mm
3.2 x 1.6mm
8mm
8mm
8mm
8mm
8mm
Notes
Tape Pitch
2mm
2mm
4mm
4mm
4mm
Part Number System
Surface mount capacitors come on standard 7" reels (larger
quantity reels are available upon request).
Plastic carrier tape is non-standard for some carrier sizes.
The numeric section of the part number refers to the physical
body size (in inches) of the component. For example: Part
number 0805SMC-PL has a body size of .08" length by .05" width.
Case Size in Inches
0402SMC–PA
Tape Type
Surface Mount Ceramic Capacitor
Tape Type: PA= Paper Tape, PL=Plastic Tape
Add “B” at end of part number for bulk.
Add “C” at end of part number for bulk cassette feeder.
L
C
T
W
X
S
Grid
Placement
Courtyard
G
Y
H
Z
SMC Component Dimensions
Component Dimensions
(mm) (in)
0603 (0201)
1005 (0402)
1608 (0603)
2012 (0805)
3216 (1206)
3225 (1210)
4532 (1812)
L (mm)
Min
0.57
0.90
1.45
1.80
3.00
3.00
4.20
S (mm)
Max
0.63
1.10
1.75
2.20
3.40
3.40
4.80
Min
—
0.30
0.45
0.30
1.50
1.50
2.30
W (mm)
Max
—
0.65
0.97
1.11
2.31
2.31
3.46
Min
0.27
0.40
0.65
1.05
1.40
2.30
3.00
T (mm)
Max
0.33
0.60
0.95
1.45
1.80
2.70
3.40
Min
—
0.10
0.20
0.25
0.25
0.25
0.25
Max
—
0.30
0.50
0.75
0.75
0.75
0.95
H (mm)
Max
0.33
0.60
0.85
1.10
1.35
1.35
1.35
SMC Land Pattern Dimensions
Component Identifier
(mm) (in)
0603 (0201)
1005 (0402)
1608 (0603)
2012 (0805)
3216 (1206)
3225 (1210)
4532 (1812)
32
Z (mm)
G (mm)
X (mm)
0.72
2.20
2.80
3.20
4.40
4.40
5.80
0.26
0.40
0.60
0.60
1.20
1.20
2.00
0.32
0.70
1.00
1.50
1.80
2.70
3.40
Y (mm)
Ref
0.23
0.90
1.10
1.30
1.60
1.60
1.60
C (mm)
Ref
0.49
1.40
1.70
1.90
2.80
2.80
3.90
Placement Grid
(No. of Grid Elements)
—
2x6
4x6
4x8
4 x 10
6 x 10
8 x 12
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
SMR
Surface Mount Resistors
Part Number
0402SMR-PA
0603SMR-PA
0805SMR-PA
1206SMR-PA
1210SMR-PA
Body Size
(Inches)
.04" x .02"
.06" x .03"
.08" x .05"
.12" x .06"
.12" x .10"
(mm)
1.0 x .05mm
1.6 x .08mm
2.0 x 1.2mm
3.2 x 1.6mm
3.2 x 2.5mm
Tape Width
Tape Pitch
8mm
8mm
8mm
8mm
8mm
2mm
4mm
4mm
4mm
4mm
Notes
Quantity
Per 7" Reel
10,000
5,000
5,000
5,000
5,000
Quantity
Bulk Cassette
80,000
25,000
10,000
5,000
—
Part Number System
Surface mount resistors come packaged on paper carrier tape
and 7" reels (larger quantities are available upon request).
Plastic carrier tape is non-standard for surface mount resistors.
The numeric section of the part number refers to the physical
body size (in inches) of the component. For example: Part
number 0402SMR-PA has a body size of .04" length by .02" width.
0402SMR–PA
Body Size in Inches
Tape Type
Surface Mount Resistor
Tape Type: PA= Paper Tape, PL=Plastic Tape
Add “B” at end of part number for bulk.
Add “C” at end of part number for bulk cassette feeder.
Bulk Cassette Feeder
53.3
10.0
1.5
+0.1
-0
3.0+0.2
-0
12.0
6.8 ± 0.1 ±8.8
0.1 ± 0.1
2.0 +0.
-0.1
5.0
110 ±0.7
+0.
36.0-0.2
19.0
+0.2
31.5-0
Bulk Case Dimensions in mm.
L
C
T
W
X
S
Grid
Placement
Courtyard
G
Y
H
Z
SMR Component Dimensions
Component Dimensions
(mm) (in)
1005 (0402)
1608 (0603)
2012 (0805)
3216 (1206)
3225 (1210)
L (mm)
Min
1.00
1.50
1.85
3.05
3.05
S (mm)
Max
1.10
1.70
2.15
3.35
3.35
Min
0.40
0.70
0.55
1.55
1.55
W (mm)
Max
0.70
1.11
1.32
2.32
2.32
Min
0.48
0.70
1.10
1.45
2.34
T (mm)
Max
0.60
0.95
1.40
1.75
2.64
Min
0.10
0.15
0.15
0.25
0.25
Max
0.30
0.40
0.65
0.71
0.71
H (mm)
Max
0.40
0.60
0.65
0.71
0.71
SMR Land Pattern Dimensions
Component Identifier
(mm) (in)
1005 (0402)
Z (mm)
G (mm)
X (mm)
Y (mm) Ref
C (mm) Ref
1.30
Placement Grid
(No. of Grid Elements)
2x6
2.20
0.40
0.70
0.90
1608 (0603)
2.80
0.60
1.00
1.10
1.70
4x6
2012 (0805)*
3.20
0.60
1.50
1.30
1.90
4x8
3216 (1206)*
4.40
1.20
1.80
1.60
2.80
4 x 10
3225 (1210)*
4.40
1.20
2.70
1.60
2.80
6 x 10
*Note: If a more robust pattern is desired for wave soldering
devices larger than 1608 (0603), add 0.2mm to the Y dimension
and consider reducing the X dimension by 30%. Add a “W” suffix
to the number; e.g., 103w.
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
33
Zero Ohm
Zero Ohm Jumper Resistors
Part Number
0402SMR-PA-0
0603SMR-PA-0
0805SMR-PA-0
1206SMR-PA-0
Body Size
(Inches)
.04" x .02"
.06" x .03"
.08" x .05"
.12" x .06"
(mm)
1.0 x .05mm
1.6 x .08mm
2.0 x 1.2mm
3.2 x 1.6mm
Tape Width
Tape Pitch
8mm
8mm
8mm
8mm
4mm
4mm
4mm
4mm
Note
Part Number System
Plastic carrier tape is non-standard for surface mount resistors.
Case Size in Inches
Quantity
7" Reel
10,000
5,000
5,000
5,000
0402SMR–PA–0
Surface Mount Resistor
Zero Ohm
Tape Type
Tape Type: PA= Paper Tape, PL=Plastic Tape
SMTA
Surface Mount Tantalum Capacitor
Part Number
Body Size
Case Size
Tape Width
3216SMTA-PL
3528SMTA-PL
6032SMTA-PL
7343SMTA-PL
3.2 x 1.6mm
3.5 x 2.8mm
6.0 x 3.2mm
7.3 x 4.3mm
A
B
C
D
8mm
8mm
12mm
12mm
4mm
4mm
8mm
8mm
Part Number System
Notes
Quantity
7" Reel
2,000
2,000
500/750
500/750
Tape Pitch
Components are molded, surface mount tantalums.
Conformal coated tantalums are available.
Please call for availability of mil-spec surface mount tantalums.
Standard reel size is 7" (larger sizes are available upon request).
All tantalum capacitors are on plastic carrier pack.
Case Size in
3216SMTA–PL
Millimeters
Surface Mount
Tantalum Capacitor
Plastic Carrier Pack
C
H2
H1
W1
W2
S
L
X
T
2 Places
G
Y
Z
Grid
Placement
Courtyard
SMTA Component Dimensions
Component Identifier
(mm)
3216
3528
6032
7343
L (mm)
Min
Max
3.00
3.40
3.30
3.70
5.70
6.30
7.00
7.60
S (mm)
Min
Max
0.80
1.74
1.10
2.04
2.50
3.54
3.80
4.84
W1 (mm)
Min
Max
1.17
1.21
2.19
2.21
2.19
2.21
2.39
2.41
W2 (mm)
Min
Max
1.40
1.80
2.60
3.00
2.90
3.50
4.00
4.50
T (mm)
Min
Max
0.50
1.10
0.50
1.10
1.00
1.60
1.00
1.60
H1 (mm)
Max
0.70
0.70
1.00
1.00
H2 (mm)
Min
1.80
2.10
2.80
3.10
SMTA Land Pattern Dimensions
Component Identifier
(mm)
3216
3528
6032
7343
34
Z (mm
G (mm)
X (mm)
4.80
5.00
7.60
9.00
0.80
1.00
2.40
3.80
1.20
2.20
2.20
2.40
Y (mm)
Ref
2.00
2.00
2.60
2.60
C (mm)
Ref
2.80
3.00
5.00
6.40
Placement Grid
(No. of Grid Elements)
6 x 12
8 x 12
8 x 18
10 x 20
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
SME
Surface Mount Electrolytic Capacitors
Part Number
Body Size
Tape Width
Tape Pitch
3mm-SME-PL
4mm-SME-PL
5mm-SME-PL
6.3mm-SME-PL
8mm-SME-PL
10mm-SME-PL
3mm
4mm
5mm
6.3mm
8mm
10mm
12mm
12mm
12mm
16mm
16mm
16mm
8mm
8mm
12mm
12mm
12mm
16mm
Notes
Quantity
13" Reel
2,000
2,000
1,000
1,000
1,000
500
Part Number System
Body Size
3mm–SME–PL
Surface mount electrolytic capacitors come standard on
15" reels.
Components are measured by the diameter of the
electrolytic can.
Plastic Carrier Pack
Surface Mount
Electrolytic Capacitor
Positive
0.3 Max
Plastic Platform
C±0.2
0.5 Max
X2P
10
16V
A±0.2
øD±0.5
B±0.2
E
A±0.2
5.4 +0.1
-0.2
0.5~0.8
Negative
(mm)
øD
A
B
C
E
3
1.5
3.3
3.3
0.8
4
1.8
4.3
4.3
1.0
5
2.1
5.3
5.3
1.3
6.3
2.4
6.6
6.6
2.2
Melf Diodes
Quantity
7" Reel
SOD80-TR
1.4 x 3.4mm
2,500
SOD80 Package is also known as LL-34 or DO-213AA.
SM1-TR
2.6 x 5.0mm
1,500
Package is also known as LL-41 or DO-213AB.
Part Number
Body Size
8mm
4mm
Quantity
13" Reel
10,000
12mm
4mm
5,000
Tape Width
Notes
Part Number System
Melf Diodes are cylindrical glass or plastic packages.
Device/Package
A
Package
Dimension A
Dimension B
SOD80 (LL34)
3.4 mm
1.5 mm
Tape Pitch
SOD80–TR
Tape and Reel
B
SM1 (LL41)
5.0 mm
2.8 mm
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
35
TO
Through-Hole Transistors
Number
of Pins
3
3
3
Part Number
TO5-3-B
TO92-3-B
TO220-3-B
Part Number System
TO5–3–B
Transistor Package
Packaging
Number of Pins
Packaging: B=Bulk, T=Tubes, TR=Tape and Reel
4.5
10.0
7.0
4.8
17.0
12.0
8.0
2.5 Min.
5.0
12.7 Min.
EBC
(1) Emitter
(2) Base
(3) Collector
ECB
(1) Emitter
(2) Collector
(3) Base
2.8
ø3.1
1.8
3.7
4.8
13.5 Min.
0.8
0.5
2.5
5
(1) (2) (3)
1.3
0.55
0.45
2.3
Dimensions: mm
2.54
(1) Base
(2) Collector
(3) Emitter
2.6
2.54
(1) (2) (3)
(1) (2) (3)
Dimensions: mm
Axial Leaded Resistors
Part Number
1/8-W-AR-1.6X3.7mm-TR
1/4-W-AR-2.3X6.5mm-TR
1/2-W-AR-3.5X9.5mm-TR
Notes
Parts are conformal coated resistors - carbon film type.
Part Number System
Wattage Size
1/8–W–AR–1.6x3.7mm–TR
Axial Resistor
Package
36
Tape and Reel
Body Size
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
Custom PCB Practice Kits
Design A Custom PCB Practice Board Or Complete
Kit To Meet Your Specific Requirements.
Practical Components will help you design custom practice PC
boards or complete kits. Use the building blocks below to create
your board and start saving time and money using dummy parts
and a PCB practice kit. Please contact your service representative
for more information.
Board Material
FR4 (standard)
Polyimide
Stencil
Metal mask stencil is
used for solder printing
which is available for
custom or Practical
board.
Board Size/Thickness
4" x 5.5" (standard)
8" x 5.5"
.062"
Other
Gerber Data
Software data used to
create a metal mask
stencil for solder paste
application.
Fiducials/Tooling Holes
Doughnut (local and
global)
Fiducials are used to
orient the position of
each individual
component to populate
the board.
Tooling holes are .125"
X, Y and Theta Data
Software used to
calibrate pick and place
machines for placement
of components to PCB.
LP/Alpha Level
LPI is a photo liquid
imageable solder mask
that will not interfere with
solder paste screen
printing.
Alpha level (silver flash)
Delivery
Standard delivery is
4 to 6 weeks.
Expedited delivery
is available.
Parts for PC Board
Capacitor
Resistor
Transistor
SOIC
PLCC
CSBGA
QFP
LQFP
TSOP
BGA
Tantalum
Other
Final Product
PCB Practice Kit
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
37
Solder Practice Board and Kits
PC008 Solder Practice Board
PRACTICAL
COMPONENTS
SO8
SO8
SOJ20 26
SOT23
SO14
SOT143
SOJ20 26
SO14
SOJ20 26
34
14
1
SO8
9
SO20
A
QFP44
.8mm PITCH
39
7
SO20
PLCC20
T1+ T1–
23
12
1
1
PLCC20
SO20
H
T1+ T1–
A
1
1
76
8
29
1
18
PLCC44
H
1
CSBGA48
23
60
10
39
7
12
51
26
QFP44
.8mm PITCH
LQFP100
.5mm PITCH
1206
0805
0603
0402
18
SO14
1
9
34
29
SO20
14
8
CSBGA48
0402
0603
0805
1206
E-MAIL: [email protected]
SO14
PLCC44
1
60
10
PHONE: 714.899.8309
SO8
DPAK
44
44
27
27
PLCC68
TSOP32
+
A
TANTALUM
+
B
0402
C
0603
0805
1206 D
P/N PC008
PLCC68
TSOP32
REV C
+ 0402
0603
+ 0805
1206
FAX: 714.899.8599
Top view—actual size of board is 5.5" x 8".
A universal PCB to meet all your needs.
Rework practice, solder training and evaluation, and for testing
and calibration of pick-and-place machines.
Part Number
CSBGA-8sq.-1.0mm
PBGA169-1.5mm-23mm-T
PBGA225-1.5mm-27mm-T
PBGA352-1.27mm-35mm-T
PQFP44-10mm-.8mm-3.9mm
PQFP100-14x20mm-.65mm-3.9mm
PQFP208-28mm-.5mm-2.6mm
PQFP256-28mm-.4mm-2.6mm
LQFP100-14mm-.5mm-2.0mm
TI-TSOP32-8x20mm-.5mm
PLCC20-TR
PLCC44-TR
PLCC68-TR
SO8GTR-3.8mm
SO14GTR-7.6mm
38
Number
Per Board
2
2
2
2
2
2
2
2
1
2
2
2
2
4
4
Order Number: PCB008 (Board Only)
Part Number
SO20GTR-7.6mm
SO20/26JT-7.6mm
SOT23-TR
SOT143-TR
D Pak(TO252)-TR
3216SMTA-PL
3528SMTA-PL
6032SMTA-PL
7343SMTA-PL
0402SMR-PA
0603SMR-PA
0805SMR-PL
1206SMR-PL
PCB008 Board
Number
Per Board
4
3
4
4
1
1
1
1
1
52
42
36
32
1
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
Solder Practice Board and Kits
T2+
T3+
T4+
T1–
T2–
T3–
T4–
51
T1+
T1–
T2–
T3–
T4–
T1+
T2+
T3+
T4+
T1–
T2–
T3–
T4–
T1+
T2+
T3+
T4+
T1–
T2–
T3–
T4–
QFP100
.65mm PITCH
QFP100
.65mm PITCH
QFP256
.4mm PITCH
QFP256
.4mm PITCH
BGA225
1.5mm PITCH
BGA352
1.27mm PITCH
BGA169
1.5mm PITCH
31
T4+
31
T3+
18
T2+
18
T1+
51
PC008 Solder Practice Board
T1+
T2+
T3+
T4+
T1–
T2–
T3–
T4–
T1+
T2+
T3+
T4+
T1–
T2–
T3–
T4–
157
1
BGA169
1.5mm PITCH
BGA225
1.5mm PITCH
BGA352
1.27mm PITCH
157
1
105
53
105
53
QFP208
.5mm PITCH
QFP208
.5mm PITCH
© 1998 PRACTICAL COMPONENTS, INC.
Bottom view—actual size of board is 5.5" x 8".
PC008 Practice Board Kits
Choose from the kits below or create your own custom configuration.
Order Number
PC008-BGA-6
PC008-BGA-12
PC008-BGA-24
PC008-BGA-48
PC008-QFP-6
PC008-QFP-12
PC008-QFP-24
PC008-QFP-48
PC008-BGA/QFP-6
PC008-BGA/QFP-12
PC008-BGA/QFP-24
PC008-BGA/QFP-48
Quantity Of Parts Per Kit
PBGA
PBGA
169
225
12
12
24
24
48
48
96
96
12
24
48
96
12
24
48
96
PBGA
352
12
24
48
96
12
24
48
96
Boards
6
12
24
48
6
12
24
48
6
12
24
48
QFP100.65mm
QFP208.5mm
QFP256.4mm
12
24
48
96
12
24
48
96
12
24
48
96
12
24
48
96
12
24
48
96
12
24
48
96
Note
Gerber Data and X,Y Theta Data are available if required at
no charge
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
39
PC008 Test Board
BGA Daisy-Chain Patterns for the PC008 Test Board
BGA 169 Daisy Chain
T+3 T-3 T+1 T-1 T-2 T+2 T+4 T-4
T+3 T-3 T+1 T-1 T-2 T+2 T+4 T-4
A
D
C
B
E
F
G
H
K
J
L
M
A
N
B
C
D
E
F
G
H
J
K
L
M
T-4 T+4 T+2 T-2
N
N
M
L
J
K
H
T-1 T+1 T-3 T+3
E
F
G
D
C
A
B
13
13
13
12
12
12
11
11
11
10
10
10
9
9
9
8
8
8
7
7
7
6
6
6
5
5
5
4
4
4
3
3
3
2
2
2
1
1
1
After Mounting to Test Board
Ball View
X-Ray View
BGA 225 Daisy Chain
T+3
1
T-3
T+1
2
4
3
5
T+2
T-1
6
7
8
9
T-2
T+4
10 11 12 13
T-4
T+3
1
14 15
T-3
T+1
2
4
3
5
T+2
T-1
6
7
8
9
T-2
T+4
10 11 12 13
T-4
T-4
T+4
15 14
14 15
A
B
A
B
A
B
C
C
C
D
D
D
E
E
E
F
F
F
G
G
G
H
H
H
J
J
J
K
K
K
L
L
L
M
M
M
N
N
N
P
P
P
R
R
R
T-2
13 12 11 10
After Mounting to Test Board
Ball View
T+2
9
T-1
8
7
T+1
6
5
4
T-3
3
2
T+3
1
X-Ray View
BGA 352 Daisy Chain
T+1
T-1
T-2
T+2
T-3
T+3
T+4
T-4
T+1
1 2 3 4 5 6 7 8 9 10 1112 1314 15 16 17 18 19 20 21 22 23 24 25 26
AF
AE
AD
AC
AB
AA
Y
W
V
U
T
R
P
N
M
L
K
J
H
G
F
E
D
C
B
A
T-2
T+2
T-3
T+3
T+4
T-4
1 2 3 4 5 6 7 8 9 10 1112 1314 15 16 17 18 19 20 21 22 23 24 25 26
T-4
T+4
T+3
T-3
T+2
T-2
T-1
T+1
26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
AF
AE
AD
AC
AB
AA
Y
W
V
U
T
R
P
N
M
L
K
J
H
G
F
E
D
C
B
A
Ball View
40
T-1
AF
AE
AD
AC
AB
AA
Y
W
V
U
T
R
P
N
M
L
K
J
H
G
F
E
D
C
B
A
After Mounting to Test Board
X-Ray View
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
SMTA Saber Board
SMTA Saber Evaluation PC Board
The SMTA Saber Evaluation PC Board.
Practical Components is licensed by SMTA to distribute
the Saber Evaluation PC Board. The Saber Board
includes land patterns for a wide variety of JEDEC and
EIAJ components.
SMTA SABER
IPC-SM-782A Version
The Saber Board is used to evaluate:
P&P equipment
Reflow process
Component placement accuracy
Cleanliness
Surface Insulation Resistance (SIR)
Speed and accuracy of component placement
Solder paste screening
Screen Test
SO16
BQFP100
Screen Test
Note
.020 Wave Test
Gerber Data and X,Y Theta Data are available if
required at no charge.
QFP208
.010 Wave Test
PLCC68
Order Number: PCB-SABER (Board Only)
SO16
QFP100
TSOP 32
SOL20
SIR Test
Top/bottom view (double-sided)
—actual size of board is 3.875" 5.375".
DPAK
BGA169 (Daisy Chained)
SMTA Saber Board Kits
Board
0402SMR
0603SMR
0805SMR
1206SMR
1210SMR
SOT23
DPAK(TO252)
SO16GT-3.8mm
SO20GT-7.6mm
PLCC68
TI-TSOP32
PQFP208-.5mm
PQFP100-.65mm
BQFP100-.636mm
PBGA169-1.5mm
Quantity Per
24 Kits
24
1000
1000
500
500
500
1000
48
100
24
24
24
24
24
24
24
Quantity Per
48 Kits
48
1632
1488
1008
960
672
1152
96
144
48
48
48
48
48
48
48
Quantity Per
96 Kits
96
4000
3000
2000
2000
2000
3000
200
288
96
96
96
96
96
96
96
Order Number:
SMTA-24
SMTA-48
SMTA-96
Part Number
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
41
Solder Practice Board
PCB003 Solder Practice Board
E-MAIL: [email protected]
PRACTICAL
0603
29
18
PLCC44
SOIC20
34
1
SOT143
SOT23
0805
12
23
QFP44 –.8
1206
QFP100 –.65mm
157
1
PHONE: 714.899.8309
O.C.
A
94V–O
DIP14
81
0603
51
39
7
31
SOIC8
0805
1
© 1999 PRACTICAL COMPONENTS, INC.
1206
FAX: 714.899.8599
COMPONENTS
105
0603
QSOP20
P/N PC003
Top View—actual size of board is 2.5" x 2.5".
53
QFP208 –.5mm
Bottom View
Order Number: PCB003 (Board Only)
PCB003 Solder Practice Board Kit
Practical Components offers this low cost kit
for solder practice and rework.
Part Number
PQFP208-28mm-.5mm-2.6mm
PQFP44-10mm-.8mm-3.2mm
PQFP100-14x20mm-3.2mm
PLCC44-TR
SO8GT-3.8mm
SO20GT-7.6mm
SOT23-TR
SOT143-TR
0603SMR-PA
0805SMR-PA
1206SMR-PA
QSOP20T-3.8
DIP14T-3.8mm
PCB003 Board
Quantity
Per Kit
1
1
1
1
1
1
3
2
6
3
6
3
1
1
Order Number: PC003 (Complete Kit)
Note
Gerber Data and X,Y Theta Data are available if required
at no charge
42
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
OMNI Practice And Training Kits
Through-Hole Training Kit
Kit Contents
Qty
15
15
15
15
15
2
15'
15'
10
10
4
Description
Turret Terminal
Bifurcated Terminal
Hook Terminal
Pierced Terminal
Cup Terminal
Printed Wiring Board
22 Gauge Wire
26 Gauge Wire
TO5 Transistor
Spacer for TO5
TO18 Transistor
Qty
4
20
12
10
20
4
6
4
Description
Spacer for TO18
1/4 Watt Resistor
1/2 Watt Resistor
Diode
Capacitor (CKO)
Capacitor (Axial)
DIPs 14/16 Pin
Flat Packs 14 Pin
Order Number: TK-1M
Through-Hole Recertification Kit
Choose the Through-Hole Recertification Kit for verification of soldering
operator’s skills for though-hole board
technology.
This kit provides sufficient
components for students to assemble
and solder final workmanship samples
for evaluation.
Kit Contents
Qty
1
3
3
7
2
2
1
Description
TB3 Through-Hole PWB
TO5 Transistor
TS5/18 TO5 and TO18 Transistor
Spacer
RCO7 1/4 Watt Resistor
CKO5 Capacitor
IC6 16 Lead DIP
FP14 14 Lead Flat Pack
Order Number: TK-1R
Standard Pitch Training Kit
Kit Contents
Qty
4
10
5
5
2
Description
Small Outline IC (SOIC) 16 pin
(300 mils wide)
Small Outline IC (SOIC) 16 pin
(150 mils wide)
Plastic Leaded Chip Carrier
(PLCC) 20 Pin
Leadless Ceramic Chip Carrier
(LCC)
Plastic Leaded Chip Carrier
(PLCC) 44 Pin
Qty
14
8
8
16
4
1
Description
Small Outline Transistor SOT89
Chip Resistor 1206
Metal Electrode Face Device
(Melf) SOD80
Tantalum Capacitor “C” Case
(6032)
Flat Pack 14 Pin
TB4 PWB
Order Number: TK-2
Fine Pitch Training Kit
Kit Contents
This kit contains all the material listed
for the TK-2 Standard Pitch Training
Kit plus:
Qty
4
2
1
Description
Quad Flat Packs (QFP) 44 Pin
(0.030" Pitch)
Quad Flat Packs (QFP) 100 Pin
(0.025" Pitch)
TB4-TB4FP PWB (Replaces
TB4 PWB)
Order Number: TK-2FP
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
43
OMNI Training Products
Workmanship Acceptance Posters
Poster sizes are 17" x 22".
P/N: P114
P/N: P115
three times the information in less space,
making them more functional, economical
and comprehensive. They are ideal for use
in training and production areas for
continual reference to required quality.
These large (17" x 22") full color posters
depict acceptance criteria for terminals,
through-hole PWB and SMT terminations
in accordance with the latest military and
IPC specifications.
The new format, which includes three
different types of connections per poster,
requires just one-third the wall area of
previous designs. Each poster presents
Order Numbers:
P111 Turret, Bifurcated Side Route and Bottom
Route Terminals
P112 Pierced, Hook and Cup Terminals
P113 Clinched, Stud and DIP Top-View
P114 SMC-LCC, Chip and Melf
P115 SMT-Flat Lead (side), Flat Lead (heel)
and “J” Leads
F100 Metal Poster Frame (Black)
SMT Workmanship Criteria on CD-ROM
The latest in Surface Mount Technology
(SMT) workmanship criteria in a userfriendly CD-ROM format. All criteria is
based on the newest industry specifications: IPC-A-610-B and J-STD-001B. This
CD-ROM contains over 200 color photographs and 90 line drawings of SMT
components, footprints and workmanship
criteria, as well as explanatory text
descriptions.
Order Number: CD-WM12
Minimum System Requirements: 486 or
Pentium Processor, Windows 3.1 or higher,
8 MB of RAM, 2X or higher CD-ROM, 16 bit
video card and VGA or SVGA monitor.
Terminal Holder
1, 7 ......... CT5 Cup Terminal
2, 6 ......... HT3 Hook Terminal
3, 4, 5 ..... TT1 Turret Terminal
1
2
3
4
5
6
Recommended for classroom training.
7
3, 4, 5 ..... BT2 Bifurcated Terminal
Order Number: TH-1
This reusable tool safely holds terminals
during wiring and soldering operations.
Terminals will fit snug in holes when
holder is new. The holes are intentionally
slightly undersized to allow for expansion
with use.
44
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
OMNI Training Products
Unified Inspection Criteria Workmanship Manuals
Unified Inspection Criteria Workmanship
Manuals provide all segments of the
electronics manufacturing industry with
the latest SMT and through-hole workmanship criteria.
Order Numbers:
WM7
WM8
Through-Hole Commercial (B/W)
Through-Hole Commercial and Military
(B/W and Color)
WM9 SMT Commercial (B/W)
WM10 SMT Commercial and Military
(B/W and Color)
P/N WM10
P/N WM8
New! Unified Wiring and Soldering Handbook
The Unified Wiring and Soldering Handbook has been designed to provide the
electronics manufacturing industry with a
comprehensive step-by-step training
handbook. The use of this cost effective
handbook will greatly simplify the training
of your soldering personnel. The handbook
follows the same format as our Audio
Visual Training Programs (sold separately).
The easy-to-follow process instructions
provide operators with the means for
continual reference and skills updating.
This spiral bound handbook addresses
the workmanship quality standards MILSTD-2000A, IPC-A-61 OA and the new joint
industry standard ANSI/J-STD-001. The use
of these handbooks will provide training
for military, medical and all levels of
commercial electronic products. This
training handbook is a must for every
production area and training department.
Each handbook addresses the following
areas of workmanship:
No. of
Pages
4
7
7
7
8
7
12
8
4
Wire Preparation
Turret Terminals
Bifurcated Terminals
Hook Terminals
Pierced Terminals
Cup Connectors
Printed Wiring Boards
Appendix 1: Workmanship criteria
MIL-STD-2000A and IPC-A-610A
Appendix 2: Solder connection
criteria
Order Number: HBS-3
Soldering Workbook
This spiral-bound soldering workbook
provides electronics manufacturing
personnel with a comprehensive soldering
training book addressing: Wire preparation, wiring and soldering terminals,
assembly and soldering of through-hole
components and also placement and
soldering of SMT components.
This workbook is also an excellent tool to
teach IPC-A 610B or any other commercial,
military or in-house quality standard. The
generic design allows instructors the
opportunity to develop those sections that
are applicable to their training program.
The Soldering Workbook is a must for
every training department.
Each page contains detailed drawings
with provisions for students to record their
notes and applicable workmanship criteria.
Order Number: SWB-1
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
45
Weller QFP Lead Repair Kit
This Kit Makes It Easy To Repair Bent
Leads And Recover Components That
Might Otherwise Be Lost.
Lab grade true flat granite surface
plate provides a stable work
surface and ensures coplanarity
after lead alignment
Lead straightening probes and tweezers
make the delicate process of placement of
bent probes into the correct depressions
easy and repeatable
Templates (Available Separately)
Patented orientation
templates make it easy to
manually reshape leads
into correct position
WLSK1000 Lead Straightening
Kit Contents:
Templates (Available Separately)
Patented Precision Alignment Templates
—make it easy to manually reshape bent
leads into correct position
Lab Grade True Flat Granite
Surface Plate
2 Lead Straightening Probes
Precision Tweezers
Vacuum Pickup Tool
Kapton Tape®
Rugged Storage Box
Replacement Templates—other size
templates are available
Instruction Manual
Templates Included in Kit:
Order
Number
WLSK244
WLSK246
WLSK247
WLSK249
WLSK255
WLSK256
WLSK257
Component
Number
QFP144
QFP208
QFP240
QFP304
QFP144
QFP160
QFP184
Pitch
Pins
.5mm
.5mm
.5mm
.5mm
.65mm
.65mm
.65mm
144
208
240
304
144
160
184
Order Number: WLSK1000
Price: $549.50
®
Kapton is a registered trademark of Dupont.
46
Order
Number
WLSK201
WLSK202
WLSK203
WLSK204
WLSK205
WLSK206
WLSK207
WLSK208
WLSK209
WLSK210
WLSK211
WLSK212
WLSK213
WLSK214
WLSK215
WLSK216
WLSK217
WLSK218
WLSK219
WLSK220
WLSK221
WLSK222
WLSK223
WLSK224
WLSK225
WLSK226
WLSK227
WLSK228
Component
Number
QFP180
QFP284
QFP40
QFP52
QFP68
QFP84
QFP132
QFP220
QFP256
QFP44
QFP52
QFP68
QFP84
QFP100
QFP132
QFP148
QFP164
QFP196
QFP244
QFP28
QFP36
QFP44
QFP52
QFP68
QFP84
QFP100
QFP40
QFP64
Pitch
Pins
.015"
.015"
.02"
.02"
.02"
.02"
.02"
.02"
.02"
.025"
.025"
.025"
.025"
.025"
.025"
.025"
.025"
.025"
.025"
.05"
.05"
.05"
.05"
.05"
.05"
.05"
.4mm
.4mm
180
284
40
52
68
84
132
220
256
44
52
68
84
100
132
148
164
196
244
28
36
44
52
68
84
100
40
64
Order
Number
WLSK229
WLSK230
WLSK231
WLSK232
WLSK233
WLSK234
WLSK235
WLSK236
WLSK237
WLSK238
WLSK239
WLSK240
WLSK241
WLSK242
WLSK243
WLSK245
WLSK248
WLSK250
WLSK251
WLSK252
WLSK253
WLSK254
WLSK258
WLSK259
WLSK260
WLSK261
WLSK262
WLSK263
WLSK264
WLSK265
WLSK266
WLSK267
WLSK268
WLSK269
Component
Number
QFP80
QFP100
QFP120
QFP176
QFP216
QFP256
QFP286
QFP336
QFP376
QFP32
QFP48
QFP64
QFP80
QFP100
QFP128 RECT
QFP176
QFP272
QFP40
QFP52
QFP64
QFP80
QFP100 RECT
QFP232
QFP32
QFP44
QFP52
QFP64
QFP80 RECT
QFP120
QFP128
QFP36
QFP44
QFP52
QFP64 RECT
Pitch
Pins
.4mm
.4mm
.4mm
.4mm
.4mm
.4mm
.4mm
.4mm
.4mm
.5mm
.5mm
.5mm
.5mm
.5mm
.5mm
.5mm
.5mm
.65mm
.65mm
.65mm
.65mm
.65mm
.65mm
.8mm
.8mm
.8mm
.8mm
.8mm
.8mm
.8mm
1.0mm
1.0mm
1.0mm
1.0mm
80
100
120
176
216
256
286
336
376
32
48
64
80
100
128
176
272
40
52
64
80
100
232
32
44
52
64
80
120
128
36
44
52
64
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
Weller Reballing Kit
Reball BGA Components To
Original Condition And
Save Time And Money!
BGA template clamping fixture
ensures critical ball placement
on the BGA component
A vial of 10,000
eutectic solder balls
Precision screening/positioning
templates for the most common
BGA pitches—replacement
templates are available
The Weller Reballing Kit features patented
templates, etched to ensure precise ball
placement. BGA components can be reballed to original condition. Used with a
temperature controlled hot air rework tool
or station, the WPRB1000 saves money.
WPRB1000 Kit Contents:
6 Templates
Vial of 10,000 Eutectic Solder Balls
BGA Template Clamping Fixture
Straight Probe
Bent Probe
Tweezers
Screwdriver
Spatula
Squeegee
Flux Pen
Kapton® Tape
Dummy BGA Component
Instruction Manual
Templates Included in Kit:
Order
Number
WPRB210
WPRB100F
WPRB203
WPRB127F
WPRB205
WPRB150F
Pitch
Matrix
1.00mm
1.00mm
1.27mm
1.27mm
1.50mm
1.50mm
Staggered
Full
Staggered
Full
Staggered
Full
Order Number: WPRB1000
Price: $549.50
®
Kapton is a registered trademark of Dupont
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
47
Personal Magnifiers
Reduce Eyestrain—Evaluate Surface Features
Quickly, Easily and Accurately With
Mag-Eyes Personal Magnifiers.
APPLICATIONS
Electronics
Schematics and Printed Circuit Board
Assembly/Rework
Manufacturing
Tooling and Prototype Development
Quality Control
Gauging and Hands-on Parts Inspection
Dentistry
X-rays, Lab Work
Manual Trades
Jewelry Work, Watch Repair
Science
Sample Studies In Geology, Botany and Biology
➊
➋
➌
➍
➎
➏
➐
Feather-lite, only 50 Grams (1.75 oz.)
Magnifier swings up and down, or can be locked in place
Modern open design assures unimpaired vision
Comfortable during long hours of use
Slip-on cushioned headband
For use with long or short hair
Snap-out interchangeable acrylic lenses (2.5X and 4X)
Features
Instantly enlarges images and objects
Hands-free magnification
Can be worn with or without eye-glasses, contact lenses or
safety glasses.
Optical grade acrylic lenses
Distortion-free viewing
No Headaches: simple, comfortable
and safe
Double lens for 3D viewing
Wide field of vision
Adjustable lens angle
One Size Fits All
ESD SAFE
Model 383-AS ESD SAFE
For electronics and clean room environments.
The model 383-AS Anti Static Mag-Eyes has all the advanced
features of the model 383, but is specifically designed for work
areas where Electro Static Discharge is to be avoided or when
clean room standards must be met. To comply with these
requirements, the 383-AS is molded from solid-state semiconductive material chemically bonded into polymer matrix and
has these qualities:
Color: black
Surface resistivity—“Static Dissipative” range: 106–109 ohms/sq.
Static protection is independent of humidity from 0% to 100%.
Static resistivity and static decay rate are unaffected by
temperature.
Static protection is maintained throughout entire life of material.
Tribo-electric charging < 20 v.
Contains no amine or amide based volatile additives and will
not contaminate component surfaces.
Clean room compatible, no sloughing—the particle counts are
substantially below those limits set for Class 10 clean rooms.
Meets stringent German standards for recyclability.
Order Numbers:
383 (Regular) $31.95
383-AS (Anti-Static) $39.95
Each unit is shipped
complete with 2 lenses
(2.5X and 4X) and
instruction sheet.
48
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
Adjustable Matrix Trays
Combination tray shown with quadpack
and flatpack supports is for illustration only.
Features
Hold any size quadpack or flatpack up to 4" long.
Plastic supports are molded in PPA with carbon fiber with a
surface resistivity of 10E5-10E7 ohm/ch, are non-sloughing and
tolerate 170C.
Tray and cover are extruded aluminum, finished in ESD safe,
clear chromate.
ESD foam with conductive film in the cover for cushioning and
component thickness variations.
Standard unit measures 6" x 12" x 1" with cover.
Thumb screws lock the cover to the base.
Standoffs on each end for easy location and locking to
the cover.
Patent No. 5,370,225.
Optional Pick and Place Mode
Quads only, must be square.
Orients devices in accurately registered X–Y positions.
Interfaces with standard pick and place machines,
e.g. Zevatech, Fuji, Quad, etc.
Overall length of .400" less cover.
Maximum Capacity For Square Quadpacks
Maximum Body
Number of Pieces
Dimensions
Per Row
.580 inches ............ 7
1.026 inches ............ 6
1.480 inches ............ 5
1.875 inches ............ 4
2.125 inches ............ 3
Order Numbers:
Product
Order Number
Price
Base w/cover for 10 Quadpacks ........................ AMT-6x12 QP .......... $185.50
Base w/cover for 10 Flatpacks ........................... AMT-6x12 FP ............. 185.50
Base w/cover for bottom brazed pkgs. .............. AMT-6x12 QP-B ......... 295.00
Base w/cover P&P for automation (QFP) ........... AMT-6x12 QP-A ......... 325.00
Base, no cover, no supports ..............................AMT-B1 ........................ 68.90
Cover only with anti-static foam ......................... AMT-C1 ........................ 47.40
Anti-static foam ................................................. AMT-A1 .......................... 5.30
Quadpack molded support w/hardware ............. AMT-QP ......................... 3.81
Flatpack molded support w/hardware ................ AMT-SS .......................... 3.81
Note
Call for quantity price breaks.
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
49
Vacuum Handling Tools
Practical Handi-Vac™ Vacuum Handling Tool
12.7mm
(1/2")
ESD SAFE
An inexpensive tool that no assembler
should be without.
Replaces tweezers for many
applications.
ESD safe.
ESD safe with antistat treatment.
Selection of four probes with vacuum
cups included.
Includes one 1/4" cup, one 3/8" cup and
two 1/8" cups.
Easily handles up to 3–ounce objects.
92mm
(3 5/8")
Totally self-contained vacuum.
No batteries to replace.
Can be included in all of your tool kits.
Good for handling surface mount
components.
Vacuum-cup rubber is ESD safe.
Made in the U.S.A.
Order Number: HV-KIT
1–10
Pricing:
$11.25
11–25
$10.75
Practical Pen-Vac™ Vacuum Handling Tool
Length
146mm (5 3/4")
ESD SAFE
Rear
Storage Cap
Quick Change
Luer Lock Fitting
1/4"
1/8"
3/8"
Fits in your pocket like a pen.
ESD safe units are supplied with a clear
aluminum finish.
Perfect for handling surface mount
components.
Vacuum-cup rubber is ESD safe.
No batteries to replace.
Includes two 1/4" cups, two 3/8" cups
and two 1/8" cups.
No vacuum hoses or power cords to get
in your way.
Has rear storage cap.
Quick change luer lock fitting.
Made in the U.S.A.
Order Number: V8901-LMS-ESD
1-10
11-25
Pricing:
$48.75
$47.00
Practical Bulb-Vac™ Vacuum Handling Tool
ESD SAFE
89mm
(3.5")
50
39.6mm
(1.56")
The Bulb-Vac™ Vacuum Handling Tool is
for the user who needs very little
accuracy when placing parts.
The entire tool is constructed of ESD
safe materials.
A needle protrudes out of the plastic tip
to hold the vacuum cup in place.
This tool is available in four
different styles.
Cup Size
Order Number
BVJ-038 (3/8" diameter vacuum cup)
BVJ-050 (1/2" diameter vacuum cup)
BVJ-062 (5/8" diameter vacuum cup)
BVJ-075 (3/4" diameter vacuum cup)
BVJ-038-B
BVJ-050-B
BVJ-062-B
BVJ-075-B
1-10
11-25
$11.25
11.25
11.45
11.45
$10.70
10.70
10.75
10.75
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
Vacuum Handling Tools
Practical SMD-Vac™-GP Vacuum Handling Tool
Is ESD Safe
Perfect for pick and place operations.
Whisper quiet.
Diaphragm pump provides years of
continuous service.
All components including vacuum cups
are ESD safe.
Three-wire power cord.
Small footprint (3" x 5") consumes
minimal bench space.
Develops over 5 inches Hg. of vacuum.
The SMD-VAC™-GP comes with:
● 110 or 220 volt vacuum source.
● Four feet of 1/8" flexible vacuum hose.
● Four feet of 1/8" coiled vacuum hose.
● A set of seven vacuum tips.
● Optional Vacuum Interrupter facilitates precision placement of SMT
capacitors, resistors and MCM die.
ESD SAFE
Order Numbers: V8000 (for 110 volts)
V8000-200 (for 200 volts)
Pricing:
1–10
$113.00
11–25
$119.00
Optional Vacuum
Interrupter for precision
parts placement.
Practical Pac-Vac™ Vacuum Handling Tool
For Portable Operation
The Pack-Vac™ vacuum handling tool is a
battery operated self-contained unit. This
versatile unit can be clipped to your belt for
one-handed portable operation. The PacVac™ is constructed with ESD safe materials
and comes complete with the
following features:
A belt clip on the housing.
Four feet of straight vacuum hose,
#VSH-1/16-4.
Four feet of coiled vacuum hose,
#VCH-1/16-4.
A set of seven vacuum tips, #VCS-7-B.
A vacuum pick-up handle, #V3020-RF.
ESD SAFE
A 9-volt disposable alkaline battery.
Compact design measures 108mm x
61mm x 22.1mm (approx. 4 1/4" x 2 3/8"
x 7/8").
Lightweight—only 156 grams.
Runs up to eight hours
continuously on one 9-volt
alkaline battery.
Produces vacuum of over ten inches
of mercury.
Order Number: V3200
1–9
Pricing:
$149.50
10-24
$142.03
Practical HP-300™ Vacuum Handling Tool
For Large Components
ESD SAFE
High-power vacuum tool designed for
large components.
Perfect for MCM modules and other
heavy components.
ESD Safe.
Easily handles up to 500 grams with the
3/4" (19mm) vacuum cup.
No vacuum hoses or power cords to get
in your way.
Totally self-contained.
Fits in your pocket like a pen.
No batteries to replace.
Vacuum-cup rubber is ESD safe.
Perfect for handling large surface mount
components.
Vacuum-cups push on to a barbed fitting
that holds them tight.
Vacuum-cup diameters are 1/2"
(12.7mm), 5/8" (15.8mm) and 3/4"
(19mm).
Made in the U.S.A.
Order Number: HP-300
1–10
Pricing:
$49.50
12.7mm
(1/2")
120mm
(4 3/4")
11–25
$48.00
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
51
Tools And Tool Kits
Weller® Soldering Gun Kit
(140/100 Watts)
(260/200 Watts)
8-piece kit with 8200 soldering gun
Includes: one soldering tip; one sealing
tip; one cutting tip; flux brush;
soldering aid tool; coil of lead-free rosin
core solder
Sturdy plastic carrying case
Soldering hints booklet
UL listed
8-piece heavy duty kit with D550
soldering gun
Includes: one soldering tip; one sealing
tip; one cutting tip; flux brush;
soldering aid tool; coil of lead-free rosin
core solder
Sturdy plastic carrying case
Soldering hints booklet
UL listed
Order Number: 8200PK ..................... $40.00
Order Number: D550PK .................... $43.00
Weller® Circuit Board Vise
ESD SAFE
Complete work center for placing,
soldering and desoldering printed
circuit boards
Spring clamps hold workpiece in place
Rotates through 360º, allowing work
performance at any convenient angle
Adjustable features allow handling of a
variety of circuit board sizes
Socket key included
Maximum surface: 6-1/4" x 9-1/8"
(160mm x 235 mm)
ESD safe
Order Number: ESF120ESD .............. $90.00
Weller® Self-Contained 2-Person Fume Extractor
Efficient 4-stage, replaceable filter
system removes 99.995% of contaminants up to 3 microns
No external air source required
Silent-running, maintenance-free
rotary pump
Compact size makes it convenient to
use anywhere
For use with FE Series soldering irons
Fully portable
120v
Order Number: WFE2P .................... $625.00
Xcelite® Pliers Kit—Electronics Handy Pack Assortment
A compact kit designed for the sophisticated electronics technician or dedicated hobbyist
Consists of the six most popular Copaloy
electronics pliers
Durable pocket-pouch with heavy-duty
snaps
Each professional quality tool
features the unique Copaloy rivet for
smoother action
Kit Includes:
● EC54J 4-1/2" Transverse end cutting
pliers
● MS54 4" Diagonal cutting pliers
● SN54 5" Long nose pliers with side cutter
● NN54 5" Fine tip needle nose pliers
● DN54G 5" Flat nose pliers
● LN54 5" Long nose pliers
● Pocket pouch with snaps
Order Number: C1K ........................... $89.95
52
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
Tools And Tool Kits
Xcelite® Attaché Tool Cases For Technicians,
Servicemen, And Field Engineers
Choice of sturdy, spacious and attractive attaché style tool cases
Aluminum tool case plus flexible soft-sided case to meet
virtually every need
Each contains an ideal assortment and arrangement of top
quality Xcelite® professional hand tools
Tools neatly mounted in pockets, plus generous space for
individualized selection of test instruments, parts boxes, Weller®
soldering iron, Xcelite® measuring tapes and other tools
Roomy file pocket in lid for service manuals, circuitry diagrams
and literature
Largest, most elaborate of tool cases.
Contains 53 individual hand tools, 31 Series 99® interchangeable
screwdriver/nutdriver blades and handles, and two specialized
screwdriver/nutdriver kits
Covered with attractive durable charcoal brown leather-grain
Marvelon vinyl
Removable 3-panel hinged tool pallet in lid, plus additional
pallet in bottom
Solid brass hardware with anodized aluminum divider
in bottom
Size: 18-3/4" x 12-1/2" x 5-7/8" (476mm x 318mm x 149mm)
Order Number:
TC100ST (Tool Case With Tools) ..................................................... $710.50
TC100MT (Tool Case Only—No Tools) ............................................ $225.45
A carefully selected, intermediate assortment of
Xcelite® hand tools.
Contains 23 individual hand tools, popular WP25 Weller® 25
watt soldering iron, 24 Series 99® interchangeable screwdriver/
nutdriver blades and handles, XL70 offset ratchet screwdriver
set, measuring tape and solder
Covered with attractive durable tan leather grain Marvelon vinyl
Removable tool pallet in lid and bottom
Solid brass hardware and padded handle with anodized
aluminum divider in bottom
Size: 18" x 12-5/8" x 4-1/4" (457mm x 321mm x 108mm)
Order Number:
TC150ST (Tool Case With Tools) ..................................................... $610.50
TC150MT (Tool Case Only—No Tools) ............................................ $199.00
A fine blending of quality, economy and flexibility.
Contains 10 individual hand tools and 27 Series 99® interchangeable screwdriver/nutdriver blades and handles
Case made from rugged Cordura® and features a heavy-duty
zipper and soft leather-wrapped handles
Contains (on outside) one pocket on one side and two smaller
pockets on opposite side
Size: 13-1/2" x 10-1/2" x 2-3/8" (343mm x 267mm x 60mm)
Order Number:
TCS200ST (Tool Case With Tools) ................................................... $325.25
TCS200MT (Tool Case Only—No Tools) ............................................ $87.95
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
53
Tools And Tool Kits
Xcelite® Multi-Purpose Tool Kit
11 quality tools perfect for all types of
routine repair work and simple
D.I.Y. projects
Packed in an attractive easy-to-store
case
Order Number: TKX11 ....................... $71.95
Xcelite® Offset Ratchet Screwdriver Set
19-piece midget, offset, reversible
ratchet set
All-purpose driver bits 1/4" (6mm)
hex shank
Simple and easy-to-use for assembly,
disassembly, adjustment and repair
work involving Allen hex, Phillips and
slotted screws
Order Number: XL70 ......................... $53.95
Xcelite® Personal Computer Repair Kit
Ideal for repairs on PCs
Contains 12 anti-static chip tools,
protects chips from ESD damage
Tools fit securely in a convenient
roll-up pouch
Order Number: 99SPC-PC ................. $36.95
Eram Mutli-Purpose Assembly Kit
Order Number: 3000 KC .................. $315.00
Eram Anti-Static 5-Tweezer and
Micro-Cutter Kit
Order Number: 3900 KC .................. $215.00
54
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
Tech Spray 1600
Cleaners/Degreasers, Defluxers, Dusters, Freeze Spray
Label & Adhesive Remover
Features
Benefits
Pre-Saturated Wipe
Quick, Efficient Cleaner
IPA and DI Water Blend
Controlled Evaporation
Non-Aggressive
Safe on Most Plastics
Lint-Free Wipe
Particle Free Cleaning
Isopropyl Alcohol
SMT Stencil Wipes
This pre-saturated wipe is excellent for removing inks, pastes and
contaminants that usually arise in most SMT processes.
Applications
Screens • Stencils • Squeegees • Ceramic and Epoxy Substrates
Order Number:
1608-DSP (48 Pre-Saturated Wipes in Pop-Up Container) .................... $9.68
Features
Benefits
99% Pure Anhydrous Alcohol Water Free to Prevent Corrosion
Rapid Evaporation
More Productive Cleaning Agent
Non-Aggressive
Safe on Most Plastics
General Purpose Cleaner
Dissolves a Majority of the Soils
Found in the Electronics
Workplace
Order Numbers:
1610-P (1 Pint in Plastic) ...................................................................... $6.82
1610-G (1 Pint in Metal) .................................................................... $32.40
1610-DSP (48 Pre-Saturated Wipes in Pop-up Container) ................. $10.75
Features
Benefits
Mild Cleaner
Safe on Most Plastics
High Flash Point (43°C/111°F) Reduces Risk of Flammability
Low Toxicity
Safer Solvent
Natural Solvent
Non-Ozone Depleting
Penetrates Rapidly
Efficient Cleaning
Pleasant Odor
Easy to Use
Order Numbers:
1613-6S (6 Ounce Aerosol) .................................................................. $7.93
1613-6SC (12 Cans Per Case) .......................................................... $85.64
Isopropyl Alcohol
99% pure, anhydrous isopropanol for general purpose cleaning.
Excellent for tape head cleaning, removal of fluxes, light oils, polar
soils and white mineral residue. Can be used as a thinner for
most fluxes.
Applications
Tape Head Cleaning • Printed Circuit Boards • Connectors
• Microwave and Telephone Circuitry • Data Processing Equipment • Medical Equipment • Relays • Flux Thinner • Fiber Optics
Label & Adhesive Remover
Label & Adhesive Remover is a specially designed, hydrocarbon
cleaner that safely removes labels and adhesive gums from
equipment and products. Effectively removes gummy residues,
labels, stickers, ink-marks, beverage spills, and other contaminates. Solvent has a pleasant odor.
Applications
Labels • Adhesives • Office Equipment • Telephones • Printers
• Copiers • Video Games • CRT Screens • Terminals
• Plastic Cases
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
55
1600 Tech Spray
Cleaners/Degreasers, Defluxers, Dusters, Freeze Spray
Ecoline Flux Remover
Ecoline Contact Cleaner
Ecoline Flux Remover
The Flux Remover is a unique combination of hydrocarbon
solvents and alcohols making it a excellent defluxer. Safe on
plastics and rapidly evaporating, the Flux Remover dissolves type
R, RMA, SA and most no-clean fluxes. Can also be used as an allpurpose cleaner for removal of light oils, silicones, waxes, greases
and similar contaminants.
Applications
Envi-Ro-Tech Duster
Features
Benefits
Contains THF
Excellent Defluxing Power
Non-Ozone Depleting
Replaces CFCs and HCFCs
Non-Corrosive
Will Not Harm Metals
Rapid Evaporation
Efficient Cleaning
Safe on Plastics
Can Be Used in a Wide Variety
of Applications
Printed Circuit Boards • Gold Fingers • Connectors • Microwave
and Telephone Circuitry • Avionics • Relays • Switches
Order Numbers:
1621-10S (10 Ounce Aerosol) .............................................................. $8.62
1621-10SC (12 Cans Per Case) ........................................................ $93.00
Ecoline Contact Cleaner
Features
Benefits
Hexane Mixture
Excellent Contact Cleaner
Quickly Penetrates
Efficient Cleaner
Mild Cleaner
Safe on Most Plastics
Non-Corrosive
Will Not Harm Metals
General Purpose Cleaner
The Contact Cleaner is a hexane mixture that cleans electrical
contacts and connections. Ideal for switches, relays, contact pads
and other electrical connections. Safe on most plastics, the
solvents will not damage switch housings.
Applications
Contacts and Controls • PCBs • Motors• Generators • Switches
• Industrial Machinery • Gears • Electromechanical Devices
Order Numbers:
1622-10S (10 Ounce Aerosol) .............................................................. $8.09
1622-10SC (12 Cans Per Case) ........................................................ $92.00
Envi-Ro-Tech™ Duster
Features
Benefits
100% HFC-134a
Zero Ozone Depletion Potential
Non-Flammable
No Risk of Combustion
Leaves No Residue
Contaminant Free
Moisture-Free
Non-Corrosive
Non-Abrasive
Safe on Most Plastics
Oderless
No Irritating Smell
Formulated with HFC-134a, this exceptionally pure, moisture-free,
inert gas removes particles without the use of harmful solvents.
Because HFCs do not harm the ozone, this product has a zero
ozone depletion factor. This product removes microscopic
contaminants, lint, dust, metallic oxide deposits and other soils.
Applications
Electronic Equipment • Computers • Printers• Optical Cleaning
• Photographic • Industrial• Film Negatives • Data Processing
Equipment• Laboratory Apparatus • Magnetic Tape Heads
56
Order Numbers:
1671-10S (10 Ounce Aerosol) .............................................................. $5.87
1671-10SC (12 Cans Per Case) ........................................................ $66.00
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
Tech Spray 1600
Cleaners/Degreasers, Defluxers, Dusters, Freeze Spray
SMT Stencil Cleaner
Features
Benefits
100% HFC-134a
Zero Ozone Depletion
Non-Flammable
Less Risk of Combustion
Chills to -62°F
Quickly Detects Faults
Leaves No Residue
Will Not Contaminate Substrate
Moisture-Free
Develops Frost
Envi-Ro-Tech™ Freezer
An HFC134a based, rapidly evaporating liquid that can chill to
minus 62°F. Because HFCs do not harm the ozone, this product
has a zero depletion factor. Used as a troubleshooting aid for
intermittently faulting capacitors, resistors, semiconductors and
other defective components. It also detects cold solder joints,
cracks in printed circuit boards and oxidized junctions.
Order Numbers:
1672-10S (10 Ounce Aerosol) .............................................................. $6.30
1672-10SC (12 Cans Per Case) ........................................................ $71.60
Applications
Features
Benefits
General Purpose Defluxer
Excellent Solvent for
Moderately Polar Soils
Envi-Ro-Tech™ 1676
Non-Flammable
Less Risk of Combustion
Pure Solvent
Zero Residue
Penetrates Rapidly
Quickly Dissolves Soils
Blended HCFC
Removes Ionic Contamination
Locator of Faulty Components • Prevents Cold Solder Joints
• Protects Heat Sensitive Components
General Purpose Defluxer
General Purpose azeotropic defluxer for R, RA, RMA and SA type
fluxes. Can be used as an all-purpose cleaner to remove light oils,
silicones, waxes, greases, and similar contaminants often found in
electronics manufacturing.
Applications
Order Numbers:
1676-12S (12 Ounce Aerosol) .............................................................. $9.24
1676-12SC (12 Cans Per Case) ........................................................ $99.80
Printed Circuit Boards • Gold Fingers • Connectors • Microwave
and Telephone Circuitry • Avionics • Relays • Switches • Other
Electronic Assemblies
Features
SMT Stencil Cleaner
Benefits
Hydrocarbon Based Cleaner Non-Ozone Depleting
High Flash Point (43°C/111°F) Reduces Risk of Flammability
Excellent Cleaner
Removes Solder Pastes
Non-Corrosive
Will Not Attack Metal Surfaces
Completely Evaporates
Efficient Cleaner
Hydrocarbon-based, non-ozone depleting stencil cleaner effectively removes solder paste from screens, misprinted boards and
equipment. Its proprietary blend works on most wet or dried thick
film and solder paste compositions. Ideal for hand cleaning
application equipment and misprinted substrates.
Applications
Order Number:
1693-DSP (48 Pre-Saturated Wipes in Pop-Up Container) ................. $13.42
Cleaning Screen Emulsions • Stencils • Ceramic and Epoxy
Substrates • Most Electronic Components • Application Accessories such as Squeegees, Spatulas and Mixers
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
57
1700 Tech Spray
Static Control
Zero Charge Anti-Stat (Gal.)
Zero Charge
Mat & Table Top Cleaner
Zero Charge® Anti-Stat
A fast drying, anti-static coating that eliminates static charge and
reduces triboelectric generation from most surfaces. Recommended for applications that experience flexing and movement
and for plastics such as polyethylene, polypropylene and
polyphenylene oxide (Noryl™).
Applications
Computer Cabinets • Printer Covers • Office Equipment • Carpets
• Drapes • Flexible Mats • Walls • Table Tops• Work Stations
• Cloth • Any Application Requiring Static Protection
Features
Benefits
All-Purpose Anti-Stat
Can Be Applied to Most Surfaces
Controls Static
Eliminates Static Charge
Topical Coating
Reduces Triboelectric
Generation
Fast Drying
Instant Charge Dissipation
Non-Flammable
Less Risk of Combustion
Easy Application
One Step
Order Numbers:
1726-PT (1 Pint with Trigger in Plastic) ................................................ $9.04
1726-PTC (12 Cans Per Case) .......................................................... $97.64
Zero Charge® Mat and Table Top Cleaner
Features
Benefits
A neutral pH cleaner for general use in production areas that
removes insulating contaminants such as flux residues, oils,
greases, nicotine, dirt and grime. The Mat & Table Top Cleaner
eliminates charge while leaving an anti-static agent that helps
prevent static charge build-up.
Dual Purpose
Cleans and Provides Static
Protection
Leaves No Insulating Film
Protects Your ESD Environment
Non-Abrasive
Will Not Scratch Substrate
Non-Corrosive
Safe on Plastics
Non-Flammable
Less Risk of Combustion
Applications
Contains No Ammonia
Use on Any Surface
Conductive Mats • Table Tops • Cleanrooms • Computer Stations
• Soldering Stations • Office Equipment • Telecommunications
• Conductive Floor Mats • Electronic Instrumentation
Order Numbers:
1733-PT (1 Pint with Trigger in Plastic) ................................................ $7.93
1733-PTC (12 Cans Per Case) .......................................................... $85.64
58
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
Tech Spray 1800
Desoldering Braid
Protective Vacuum Packaging
No-Clean Wick
Tips For Selecting The Right Wick
Important Considerations
Suggestions
Cautions
Use a wick equal in diameter to pad and
tip size.
Use a slightly larger diameter wick if cut
at an angle.
Use a smaller diameter wick if folded.
If the wick size is too large, it will restrict
heat transfers to the connection and
result in reduced wicking action.
If the wick size is too narrow, it will
require numerous applications to
effectively desolder joint, subjecting the
component and pad to unnecessary
prolonged heat.
Amount of solder involved
Size of pad or connection
Desired speed of operation
Operating temperature
Specifications
Meets or Exceeds MIL-F-142560D, Type R;
NASA NHB 5300.4 (34-1); NASA NPC 200-4;
NASA SP5002.1821: HP 8690-0576; 1822: HP
8690-0588; 1823: HP 8690-0577.
All dimensions are approximate. All
products shipped in vacuum packaging.
Pro Wick Anti-Static Bobbin
Size/Color
#2/Yellow
#3/Green
Product
1809
1810
#4/Blue
1811
Width
.060" (1.5mm)
.85" (2.0mm)
.100" (2.5mm)
Availability
5F, 10F
5F, 10F
5F, 10F
No-Clean Wick Anti-Static Bobbin
Size/Color
#2/Yellow
#3/Green
#4/Blue
Product
1821
1822
1823
Width
.60" (1.5mm)
.85" (2.0mm)
.100" (2.5mm)
Availability
5F, 10F
5F, 10F
5F, 10F
Order Numbers:
1809-5F ..................................................... $1.70
1810-5F ..................................................... $1.84
1811-5F ..................................................... $2.03
1821-5F ..................................................... $2.11
1822-5F ..................................................... $2.25
1823-5F ..................................................... $2.48
Wick (Actual Size)
#1 White
#2 Yellow
#3 Green
#4 Blue
#5 Brown
#6 Red
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
59
1900 Tech Spray
Equipment and Specialty Products
TechPump Bottles: 1980, 1982, 1981
TechPump Bottles
TechPump Bottles are designed for precision control and dispensing of solvents in electronic and laboratory environments. The
distinctive pumping mechanism combined with a high density
polyethylene (HDPE) bottle makes a complete unit, ready for use
with a broad range of cleaning solvents. The dish-type pump
dispenser allows for a clean, one-handed operation, which
prevents the use of excessive solvent, and keeps contaminants
from entering the container.
Applications
The pump includes a hinged lid to keep out impurities while
the container is not in use, and stainless steel parts to facilitate the
use of aggressive solvents. Precision valve seals contents to reduce
vapor and product loss. To insure total purity, the unit is shipped
with a cellon band sealing the pump head.
Order Numbers:
1980 (4 Ounce Bottle with Pump) ....................................................... $11.77
1981 (6 Ounce Bottle with Pump) ....................................................... $11.94
1982 (8 Ounce Bottle with Pump) ....................................................... $12.10
1983 (6 Ounce Conductive Bottle with Pump) .................................... $15.27
For use with all Tech Spray cleaners, degreasers and defluxers
• Isopropanol • Ethanol• Mixed Alcohols • Terpenes •Water
Based Solvents
2300 Tech Spray
TechSwabs™
Swab tips are manufactured with a variety of quality materials to
suit different tasks. Most are heat sealed onto handles to avoid the
contaminating residues of adhesives. Handles are fashioned from
a selection of natural and man-made materials chosen for their
flexibility and durability.
TechSwabs™ are packaged in a Class 100 cleanroom in static
dissipative resealable bags that control both electrostatic discharge and contamination. TechSwabs™ are ideal for
cleanroom use.
Tip Width
Attachment of Tip
Handle Length
Handle Material
Anti-Static Handle
Pliable Handle
60
2302
2300
7/16"
Heat Sealed
6"
Polypropylene
Yes
Yes
3/16"
Wrapped
6"
Wood
Neutral
—
Order Numbers:
2302-10 (10 Pack Bag) ........................................................................ $3.15
2302-50 (50 Pack Bag) ........................................................................ $9.87
2302-1000 (1000 Pack Bag) ........................................................... $123.97
2300-100 (100 Pack Bag) .................................................................... $2.83
2300-1000 (1000 Pack Bag) ............................................................. $21.52
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
Tech Spray 2300
Wipes
TechClean SMT Wipe
TechClean® Wiper
Specifications
Exceeds U.S. Air Force requirements for surface contamination,
HP 9300-1618.
Specifically designed for cleanroom maintenance, this hydroentangled cellulose/polyester wipe has high absorbency with extra
low particulate and chemical extractables.
Applications
Order Number:
2350-100 (100 9x9 Inch “C”-Fold Wipes Packaged Bag ‘n’ Bag™) .... $14.57
Cleanroom Maintenance • Solvent and Aqueous Absorbent
• Dislodgment of Heavy Soils • Static Free Environments
TechClean® SMT Wipe
Specifically designed for cleaning surface mount stencils and
screening equipment. TechClean® SMT Wipe’s cellular based foam
structure traps particulates and liquids for a thorough job. This
wipe is manufactured with polyurethane materials, using a fiberfree configuration that will not leave wipe particulates behind. Use
with Tech Spray’s SMT Stencil Cleaner (1693) for effective results.
Applications
Order Number:
2358-50 (100 6x6 Inch Wipes) .......................................................... $47.50
Cleaning SMT Stencils • Screens • Squeegees • Mounts
• Misprinted Boards and Components
TechClean® SMT Blue Wipes
Specifically designed for maintenance, this blue hydroentangled
cellulose/polyester wipe has high absorbency with extra low
particulate and chemical extractables. This wipe has the same
composition as the TechClean® Wiper (2350).
Applications
Order Number:
2359-300 (300 9x9 Inch Flat Wipes Packaged Bag ‘n’ Bag™) ............ $23.47
Cleanroom Maintenance • Solvent and Aqueous Absorbent
• Dislodgement of heavy Soils • Static Free Environments
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
61
Glossary
Alloy = A combination of two or more elements whereby at least
one of them is a metal.
PLCC = Plastic leaded chip carrier
Array = A group of elements arranged in rows and columns.
SMD = Surface mount device
BGA = Ball grid array
SMOBC = Solder mask over bare copper
BQFP = Bumpered quad flat pack
Castellation = A leadless termination used on LCC packages for
connection to the printed circuit board.
Coplanarity = Related to surface mount, how flat the leads are
referenced to the seating plane.
CQFP = Ceramic quad flat pack
CSBGA = Chip scale BGA
CSP = Chip scale package
DRAM = Dynamic random access memory
Dummy Component = A mechanical package, typically
without the silicon die. Used to verify the manufacturing process
inexpensively.
QFP = Quad flat pack
SMT = Surface mount technology
SMTA = Surface Mount Technology Association
SOIC = Small outline integrated circuit
SOJ = Small outline “J” leads
Solder = A readily meltable alloy of tin and lead used to bond
component connections.
SOP = Small outline package
SSOP = Small shrink outline package
SOT = Small outline transistor
TAB = Tape automated bonding using tape for leads rather than
bonded gold wire.
FC = Flip chip
TQFP = Thin quad flat pack
HASL = Hot air solder leveling
TSOP = Thin small outline package
Heatsink = A device that absorbs and drains off heat from hot
objects, re-radiating it into the surrounding environment.
TSSOP = Thin, Shrink Small Outline Package
JEDEC = Joint Electronic Device Engineering Council
MCMBGA = Multichip module BGA
MQFP = Metric quad flat pack
LCC = Leadless chip carrier
LPI = Liquid photo imageable
OHM = The unit of resistance
PCMCIA = Personal Computer Memory Card International
Association
PQFP = Plastic quad flat pack
62
Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com
Practical Components, Inc.
15211 Springdale Street
Huntington Beach, CA 92649
Phone: 1-714-899-8309
Fax: 1-714-899-8599
Email: [email protected]
www.practicalcomponents.com
PRACTICAL
COMPONENTS
Fax Quote Form
Name ________________________________________________
Phone ____________________________ Ext _______________
Title _________________________________________________
Fax __________________________________________________
Company _____________________________________________
Email ________________________________________________
Address ______________________________________________
_____________________________________________________
Credit Card
□ Visa □ MasterCard □ American Express
City __________________________________________________
Card# _______________________________________________
State _______________________________ ZIP ______________
Exp. Date ____/____
Country ______________________________________________
Signature _____________________________________________
Delivery Due Date____________________ □ For Purchase Within 30 Days □ For Bid Only
Part Number
Package Type
Quantity
Target Price
____________________________________________________________________________________________________
____________________________________________________________________________________________________
____________________________________________________________________________________________________
____________________________________________________________________________________________________
____________________________________________________________________________________________________
____________________________________________________________________________________________________
____________________________________________________________________________________________________
____________________________________________________________________________________________________
____________________________________________________________________________________________________
____________________________________________________________________________________________________
____________________________________________________________________________________________________
____________________________________________________________________________________________________
____________________________________________________________________________________________________
____________________________________________________________________________________________________
____________________________________________________________________________________________________
____________________________________________________________________________________________________
____________________________________________________________________________________________________
____________________________________________________________________________________________________
Comments ____________________________________________________________________________________________________
______________________________________________________________________________________________________________
______________________________________________________________________________________________________________
______________________________________________________________________________________________________________
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement