Use and Care Manual (9 MB)

Use and Care Manual (9 MB)
Use & Care Manual
Viking Range, LLC
111 Front Street
Greenwood, Mississippi 38930 USA
(662) 455-1200
For product information,
call 1-888-845-4641
or visit our web site in the US at www.vikingrange.com or in
Canada at www.brigade.ca
1 Series Built-In Dishwasher
F21314
(101513)
Congratulations
Table of Contents
Your dishwasher is designed to offer years of reliable service. This Use
& Care Guide will provide you with the information you need to
become familiar with your dishwasher’s operation and care.
Getting Started
Your complete satisfaction is our ultimate goal. If you have any
questions or comments about this product, please contact the dealer
from whom you purchased it, or contact our Consumer Support Center
at 1-888-845-4641.
For more information about the complete and growing selection of
products, contact your dealer or visit us online in the US at
www.vikingrange.com or in Canada at www.brigade.ca
Warnings & Safety ____________________________________________4
Important Safety Instructions ___________________________________5
Installation ___________________________________________________8
Features ____________________________________________________10
Operation
Loading the Dishwasher ______________________________________11
Rack Adjustments ___________________________________________13
Proper and Improper Loading_________________________________16
Operating Instructions _______________________________________19
Program Table ______________________________________________20
Function Buttons ____________________________________________21
Detergent and Rinse Agent Dispenser _________________________26
Product Care
Care and Maintenance _______________________________________33
Cleaning the Filters __________________________________________35
Cleaning the Spray Arms _____________________________________37
Troubleshooting _____________________________________________38
Service Information __________________________________________44
Warranty ___________________________________________________45
2
3
Getting Started
Please read this user manual and particularly the safety instructions
completely and carefully. They will save you time and effort and
help to ensure optimum dishwasher performance.
Be sure to observe all listed warnings and cautions. Look particularly for the
icons with exclamation marks inside. The information icon will also provide
important references.
Warning and Important Safety Instructions appearing in this manual are not
meant to cover all possible conditions and situations that may occur.
Common sense, caution, and care must be exercised when installing,
maintaining, or operating the appliance.
ALWAYS contact the manufacturer about problems or conditions you do
not understand.
Important Safety Instructions
WARNING
When using the dishwasher, follow basic precautions, including the
following:
Read all instructions before using the dishwasher! Save these
operating instructions and pass them on to any future user.
• Use the dishwasher only for its intended purpose as described in
this user manual. This appliance is intended for normal household
use only.
• The manufacturer disclaims responsibility for damage or injury
caused by improper use of this appliance.
Recognize Safety Symbols, Words, Labels
WARNING
Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which,
if not avoided, may result in injury. It may also be used
to alert against unsafe practices.
NOTICE
Indicates a potentially hazardous situation which,
if not avoided, may result in damage to the dishwasher,
the tableware, the equipment, or the environment.
Read and follow all instructions before using this appliance to prevent the
potential risk of fire, electric shock, personal injury or damage to the
appliance as a result of improper usage of the appliance. Use appliance
only for its intended purpose as described in this manual.
To ensure proper and safe operation: Appliance must be properly installed
and grounded by a qualified technician. DO NOT attempt to adjust, repair,
service, or replace any part of your appliance unless it is specifically
recommended in this manual. All other servicing should be referred to a
qualified servicer.
4
• The information in this user manual must be followed to minimize
the risk of fire or explosion and to prevent property damage,
personal injury, or loss of life.
• DO NOT operate your dishwasher unless all the enclosure panels
are properly in place.
• DO NOT tamper with the controls.
• DO NOT abuse, sit on, stand in or on the door or dish rack of the
dishwasher.
• The cup racks are designed to support cups, glasses, and kitchen
utensils. When the cup racks are in the dishwasher, do not lean on
or use the cup racks to support your body weight.
• To reduce the risk of injury, DO NOT allow children to play in, on,
or near the dishwasher.
• Use only detergents or rinse agents recommended for use in a
household dishwasher and keep them in a dry place out of the
reach of children. Check that the detergent dispenser is empty after
the completion of each wash program.
5
Getting Started
Warnings & Safety
Getting Started
Important Safety Instructions
• Dishwasher detergents are alkaline. They can be dangerous if
inhaled or swallowed. Avoid contact with skin and eyes and keep
children and people in poor health away from the dishwasher when
the door is opened. Consult a doctor immediately if detergent has
been swallowed or inhaled.
• This appliance must be grounded. In the event of a malfunction or
breakdown, grounding will reduce the risk of electric shock by
providing a path of least resistance for electric current. This
appliance is equipped with a cord having an equipment-grounding
conductor and a grounding plug. The plug must be plugged into
an appropriate outlet that is installed and grounded in accordance
with all local codes and ordinances.
• DO NOT drink water from the dishwasher! Harmful residues could
be present.
• Under certain conditions, hydrogen gas may be produced in a hot
water heater system that has not been used for two weeks or more.
HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not
been used for such a period, before using the dishwasher turn on
all hot water taps and let the water flow from each for several
minutes. This will release any accumulated hydrogen gas. As gas is
flammable, do not smoke or use an open flame during this time.
• DO NOT store or use flammable liquids or vapors in the area of the
dishwasher.
• When loading items to be washed, position sharp items so that they
are not likely to damage the door seal and load sharp knives with
the handles up to reduce the risk of cut-type injuries.
• DO NOT wash plastic items unless they are marked “dishwasher
safe” or the equivalent. For plastic items not so marked, check the
manufacturer’s recommendations.
• If a malfunction occurs, switch off the appliance and turn off the
water supply to the dishwasher.
• Before cleaning or carrying out maintenance, switch off the
appliance, disconnect the power plug, and turn off the water
supply.
• This appliance must be connected to a grounded metal,
permament wiring system, or an equipment-grounding conductor
must be run with the circuit conductors and connected to the
equipment-grounding terminal or lead on the appliance.
WARNING
Improper connection of the equipment-grounding conductor can result in
a risk of electric shock. Check with a qualified electrician or service
representative if you are in doubt whether the appliance is properly
grounded. Do not modify the plug provided with the appliance; if it will
not fit the outlet, have a proper outlet installed by a qualified electrician.
WARNING
State of California Proposition 65
-This product contains one or more chemicals known to the State of
California to cause cancer.
-This product contains one or more chemicals known to the State of
California to cause birth defects or other reproductive harm.
SAVE THESE INSTRUCTIONS!
• Repairs and technical modifications must be carried out exclusively
by a qualified technician.
• If the dishwasher is not in use for an extended period of time (i.e.
vacation home), we recommend you check that the baskets are
empty, leave the inside of the dishwasher clean, leave the door
cracked open to allow air to circulate, and turn off both the power
and water supply to the dishwasher.
6
7
Getting Started
Important Safety Instructions
Getting Started
Installation
WARNING
When using the dishwasher, follow basic precautions, including the
following:
• The dishwasher installation must be performed in accordance with
the installation guide. If you did not receive an installation guide,
order it by calling 1-888-1-888-845-4641or you may also download
it from our website in the US (www.vikingrange.com) or in Canada
(www.brigade.ca).
• Installation, maintenance, and repair should be performed by a
qualified installer. Work by unqualified persons could be dangerous
and may void the warranty.
WARNING
DANGER OF SUFFOCATION!
Ensure that any plastic wrappings, bags, small pieces, etc., are
disposed of safely and kept out of the reach of children.
• Remove the dishwasher door when removing an old dishwasher
from service or discarding it. Ensure that the dishwasher presents no
danger to children while being stored for disposal.
• Old appliances may contain materials that can be recycled. Please
contact your local recycling authority about the possibility of
recycling these materials.
• DO NOT operate the dishwasher if damaged, malfunctioning,
partially disassembled, or if it has missing or broken parts.
• Before installation or service, disconnect the power supply to the
work area by unplugging the unit, “tripping” the circuit breaker, or
removing the fuse.
• Only connect the dishwasher to the power supply when all
installation and plumbing work is complete.
• DO NOT install or store the dishwasher where it can be exposed to
below freezing temperatures or exposed to weather.
• Dishwasher must be secured to adjacent cabinetry using the
brackets provided. Failure to do this may cause damage to property
or bodily injury.
• Connect to a properly rated, protected and sized power supply
circuit to avoid electrical overload. The dishwasher is designed for
an electrical supply of 120V (volts), 60Hz (hertz), AC, connected to a
dishwasher-dedicated, properly grounded electrical circuit with a
fuse or breakers rated for 15 amperes. Electrical supply conductors
shall be a minimum of #16 AWG copper wire rated at 167°F (75°C)
or higher. These requirements must be met to prevent injury and
machine damage. Consult a qualified electrician if in doubt.
• DO NOT use any extension cord or portable outlet device to
connect the dishwasher to a power supply.
8
9
Getting Started
Installation
Getting Started
Loading the Dishwasher
• Pull the handle to open the door. If the door is opened during
operation, the dishwasher will stop running. Once the door is closed,
the program will continue.
Upper Rack
Lower Rack
Top rack load pattern
for 14 place settings
according to the AHAM
DW-1 Standards
Bottom rack load pattern
for 14 place settings
according to the AHAM
DW-1 Standards
1
8
2
3
9
4
10
11
5
6
12
CAUTION
7
Hot steam can escape! Danger of serious burns or other injury.
11.
12.
13.
14.
15.
16.
17.
18.
19.
10.
11.
12.
Upper rack
Upper spray arm
Salt container (select models)
Cutlery basket
Detergent dispenser
Door
Control panel
Guiding track for the upper rack
Lower spray arm
Filters
Lower rack
Model and Serial Tag
10
• Remove coarse food leftovers from tableware.
• Now you can load the dishwasher.
CAUTION
•
•
•
Large knives and other utensils with sharp tips and edges must be
placed horizontally into the upper rack due to risk of injury. Other
smaller knives and sharp utensils should be placed with sharp side
down in the cutlery basket.
Use extreme caution when removing knives and other sharp utensils
from the dishwasher. These items may have shifted position during the
wash program, and may be wet or slippery.
The cup racks are designed to support cups, glasses, and kitchen
utensils. When the cup racks are in the dishwasher, do not lean on or
use the cup racks to support your body weight.
11
Getting Started
Features
Getting Started
• Your dishwasher holds a maximum of 14 place settings.
• Place all containers such as cups, glasses, and pots into the
dishwasher with the opening facing downwards (so that no water can
collect).
• Small and light items can go into the upper rack.
• Long and narrow items are placed in the middle of the racks.
• Place all large and very dirty items in the lower rack.
• Dishes and cutlery should not be placed above each other.
• Glasses should not touch each other.
• The movement of the spray arms must not be hindered.
• DO NOT overload your dishwasher and pay attention to manufacturer
instructions regarding dishes which are appropriate for use in a
dishwasher. Only with suitable dishes (mentioned in next section) will
you obtain optimal washing results with a sensible use of energy.
Rack Adjustments
Lower Upper Rack
• To lower the upper rack, hold and press in the rack lever on one
side and carefully lower the rack without releasing the lever B.
• Repeat the procedure with the lever on the opposite side of the
rack.
NOTICE
Make sure that both levers catch in
the same height position.
Upper Rack
Load the upper rack with dessert plates,
cups, glasses, etc.
Variable Height Setting
The upper rack is equipped with a lifting mechanism which enables
you to change the height of the rack even if it is fully loaded, and
without having to remove it from the dishwasher.
Folding Tines
There are “folding tines” in the upper
rack to allow you more space to
accommodate glasses or cups.
• Simply pull in the first front folding
tine, move it to left A and right B to
place in another position. The tines
will also lay flat.
Lift Upper Rack
• To lift the upper rack to a higher position, hold it on one side and
carefully pull it upwards A.
• To lift the opposite side of the rack, hold it and pull it upwards in
the same manner.
12
Adjustable Shelves
Depending on the size of the glasses
and cups, the shelf height setting may
be adjusted.
• Fold the shelf upwards A.
• Positioning at the desired height B.
• Fold the shelf again downwards C.
13
Getting Started
Loading the Dishwasher
Rack Adjustments
Rack Adjustments
Lower Rack
Rack Adjustments
Use the lower rack for plates, bowls,
pots, etc.
• Fold the shelf upwards A.
• Positioning at the desired height B.
• Fold the shelf again downwards C.
Adjustable Lower Rack Tines
The six piece foldable tines (A) located
in the lower rack of the machine are
designed for an easier placement of
large pieces such as pans, bowls, etc.
You can create larger spaces by folding
each tine individually or all of them at
once. To bring the adjustable tines into
horizontal position, grab the tines from
mid position and push them in the
directions of arrows (B) To bring the
tines back to vertical position, just lift
them up. Adjustable tines will click into
the latch again.
Sliding Cutlery Basket
Designed to allow free placement of the dishes according to their size;
the Sliding Cutlery Basket can slide over the tines to the left A and
right B side.
3
4
5
6
Use the basket inset C for your cutlery so that all items in the basket
are surrounded by a sufficient water flow.
For larger items (e.g. wire whisks) the basket inset may be removed C.
Simply raise.
Operation
Place long items such as ladles, cooking spoons, etc., on the shelf in
the upper rack.
NOTICE
Bringing the tines to the horizontal position by holding them from
the tips may cause them to bend. Therefore, adjust the tines by
holding them by their stems and pushing in the direction of arrow.
NOTICE
When finished, test to ensure that the spray arm can still move freely.
NOTICE
When finished, test to ensure that the spray arm can still move freely.
14
15
Operation
To make loading easier, the cutlery basket can be removed. Simply
take out the basket upward.
Proper and Improper Loading
NOTICE
NOTICE
• Place all large and very dirty items in the lower rack.
• Place all containers such as cups, glasses, and pots into the
dishwasher with the opening facing downwards (so that no
water can collect).
• The movement of the spray arms must not be hindered.
• Do not overload your dishwasher. Dishes and cutlery should not
be placed above each other. Glasses should not touch.
• Only with suitable dishes (mentioned on page 6) will you obtain
optimal washing results with a sensible use of energy.
Sliding cutlery basket
load pattern
for 14 place settings
according to the
AHAM
DW-1 Standards
Incorrect
Incorrect
Incorrect
Incorrect
16
• Rust-sensitive steel parts like iron and cast iron that can rust and
stain other utensils and damage the interior stainless steel liner of
the dishwasher and void the warranty. DO NOT wash copper, brass,
pewter, bronze, or tin.
• Cutlery with wooden or horn handles and cutlery with mother-ofpearl or porcelain handles will deteriorate over time if put in the
dishwasher.
• Plastics may lose their shape or color with hot water; please follow
the instructions of plastic manufacturers. Be sure that plastic items
are marked “dishwasher safe.”
• Glued dishes or cutlery are not suitable for machine washing since
certain adhesives may get soft or dissolve with hot water.
• Aluminum may fade over time. Minerals in water and detergent may
cause the aluminum to darken or spot.
• Sterling silver articles should not be washed in the dishwasher
because they tend to discolor and become dull by dishwasher
detergent.
• Silverware and stainless steel items should not be in contact with
each other. Mixing these items can cause staining. Remove and
hand-dry these items immediately when the program ends.
• Decorated glasses, porcelain, fine china, and china with gold rims
are sensitive to machine washing. They may lose their patterns and
colors over time.
• Crystal and very fine glassware may become opaque (etch), losing
their shine over time. You may prefer to wash them by hand.
• DO NOT wash sponges or dish cloths in dishwasher.
• DO NOT wash art and craft articles in dishwasher.
• Disposable plastics and disposable aluminum cannot withstand high
temperatures; DO NOT wash them in the dishwasher.
17
Operation
Operation
1: Salad Fork
2: Teaspoon
3: Dinner Fork
4: Knife – Solid Handle
5: Serving Spoon
6: Serving Fork
What Should Not be Washed in Your Dishwasher
Proper and Improper Loading
Operating the Dishwasher
CAUTION
• If in doubt, wash by hand or follow the instructions from the
manufacturer of utensils, dishes, glasses, or pots and pans.
• Do not wash items soiled with cigarette ash, candle wax, varnish,
paints, or chemicals since they can damage your dishwasher.
NOTICE
We recommend when buying new dishware, try to choose ones that are
suitable for machine washing (marked as dishwasher safe).
1: On/Off Button
2: Half Load Indicator LED
3: Salt Level Indicator LED
4: Start/Pause/Cancel Indicator LED
10: Tablet Detergent Indicator
5: Start/Pause/Cancel Button
11: Program Indicator
6: Time Delay Button
12: Sanitization Indicator
7: Time Delay Indicator LED
13: Function Button
8: Rinse Level Indicator LED
14: Program Selection Button
9: Remaining Time Indicator/
9: Delay Time Indicator/Sanitized Indicator
3 sec
Caring for your Tableware
18
19
Operation
• Open the door and load the dishwasher.
• Check that both upper and lower spray arms move freely.
• Pour correct amount of detergent into the detergent dispenser and
close the lid.
• Push in the On/Off button 1 and check that the display lights come
on.
• Check the rinse agent level indicator LED 8. If necessary, refill the
rinse agent.
• Check the salt level indicator LED 3. If necessary, refill salt (select
models).
• Use the Program Selection button 14 to choose your washing
program.
• When there are few dishes, additionally use the Half Load
function.
• Depending on the hardness level of the tap water, the Tablet
Detergent function allows better drying and washing performance
from the multi-purpose tablets.
• Start the program with the Start/Pause/Cancel button 5.
• Close the door and the program will start.
• When the wash program has ended, an electronic beep will sound
and will continue every 10 seconds. After two minutes of elapsed
time, the sound will stop. The beep can also be stopped by
opening the door or by pressing the On/Off button 1.
• Press the On/Off button 1 and open the door after the program is
completed. The indicator lights will go off.
• Allow your dishes to cool for 15 minutes, with the door open.
• Unload the dishes. Begin with the lower rack.
Operation
The combination of high temperatures and dishwasher detergent may
cause damage to some items if they are washed in the dishwasher.
Remember, if there is any doubt about any aspect concerning items to
be washed in the dishwasher, follow the instructions from the
manufacturer of the items, or wash the items by hand.
Operating the Dishwasher
Operating the Dishwasher
The consumption values shown in the table were determined under standard conditions. For this reason, deviations are possible under practical conditions.
120
5.3
20.2
CFDW101 FDW101WS
100-135
100-135
3.01-5.34
2.38-4.70
11.4-20.2
9.0-17.8
65
3.1
11.8
Duration (Minutes)
Water (Gallons)
Water (Liters)
Program Process
12
1.16
4.4
34
3.1
11.8
Wash
M
Main Wash
M
Rinse 1
M
Rinse 2
M
Final Rinse
M
Dry
M
End
Wash
M
Main Wash
M
Rinse 1
M
Rinse 2
M
Final Rinse
M
Dry
M
End
FDW101
Main Wash
M
Rinse
M
Final Rinse
M
Dry
M
End
Main Wash
M
Rinse
M
Final Rinse
M
End
Wash
M
End
-
-
3
Light / China
122
50
149
65
Light
+
25
5
15-25
3-5
15
3
PROGRAM TABLE
2
Fast Wash
113
45
131
55
Light
+
15-25
3-5
15
3
15
3
1
Rinse / Hold
Program Number
Program Name
(°F)
Wash Temperatures
(°C)
(°F)
Rinse Temperatures
(°C)
Degree of Dirtiness
15 ml
Detergent in
15-25 ml
Dispenser
+5 ml
Section
ml
Hard
tsp
Recommended Water
ml
Dispenser Medium
tsp
Section Water
ml
Soft
Water
tsp
20
Avoid opening the door during the wash cycle. This interrupts the
washing process, and hot steam will escape. Hot steam can cause
burns and other serious injuries. When the door is closed, the program
will continue.
Function Buttons
The combination of high temperatures and dishwasher detergent may
cause damage to some items if they are washed in the dishwasher.
Remember, if there is any doubt about any aspect concerning items to
be washed in the dishwasher, follow the instructions from the
manufacturer of the items, or wash the items by hand.
on
off
On/Off Button
Turn the dishwasher on with the On/Off button. When turning
on, the icon on the display of the last used program will light
up.
P
Program Selection Button
Use the Program Selection button to select the desired
program. The icon of the corresponding program will light up.
Refer to “Table of Program Data and average Consumption
Values” to select a program suitable for your dishes. select the
desired program with Program Selection button.
F
Function
Use the function button to select Half Load, Tablet Detergent,
and Sanitize Functions.
Half Load/Tablet Detergent Button
Half Load/Tablet Detergent button allows you to turn on and
off the Half Load and Tablet Detergent functions of your
machine.
Half Load Function
If you want to run your machine without loading it completely,
place your dishes into the machine as you desire. Press On/Off
button to turn on your machine. Press the Half Load/Tablet
Detergent button after selecting the desired program until Half
Load Indicator lights up, then press Start/Pause/Cancel button
and close the door of your machine. With the Half Load option
you can use every part of your lower and upper baskets and
save water and energy.
21
Operation
Operation
4 Reference*
Normal Wash
122
50
142-145
61-63
Medium
+
+
25-40
5-8
25
5
15-25
3-5
5
Pots / Pans Plus
158
70
167
75
High
+
+
40
8
40
8
25-40
5-8
CAUTION
Operating the Dishwasher
Tablet Detergent Function
Depending on the hardness level of the tap water, the Tablet
Detergent function allows obtaining a better drying performance from
the multi-purpose detergents such as 2in1, 3in1, 4in1, 5in1, etc., called
as all-in-one detergents. Tablet Detergent Indicator lights when the
Tablet Detergent function is selected.
Salt and Rinse agent indicators turn off when this function is activated.
Turn on your machine by pressing the On/Off button to use the Tablet
Detergent function. Press the Function button after selecting the
desired programme until the Tablet Detergent Indicator lights up.
Press Start/Pause/Cancel button and close the door of your machine.
Sanitize Function
Sanitize function raises the water temperature in the final rinse to meet
the requirements of NSF/ANSI STANDARD 184 for Residential
Dishwashers. Certified residential dishwashers are not intended for
licensed food establishments.
Turn on your machine by pressing the On/Off button to use the
Sanitize function. Press the Function button after selecting the desired
program until Sanitization indicator lights up. Press Start/Pause/Cancel
button and close the door of your machine.
Remaining Time Indicator/Delay Time Indicator
You can follow the remaining program duration from the
time indicator display.
Delay Start Button
This option enables you to start the selected program with
a delay of .5 to 9.5 hours.
• Delay time is adjusted by pressing the Time Delay
button (press several times).
• After adjusting the delay time, press the Start/Pause/Cancel
button.
• Close the door. At the end of the delay set, the program
starts automatically.
NOTICE
During a wash program, the Delay Start option does not function.
Operation
Operation
Available only with Regular Wash, Pots & Pans, and Pots & Pans Plus
programs.
Operating the Dishwasher
By using Function button, Half Load, Tablet Detergent and Sanitize
functions can be selected individually.
WARNING
Selected function will remain active in the next washing program. If you
want to use these functions in the new program you have selected, press
the Function button until the indicator of the relevant function turns off.
RESET
3 sec.
Start/Pause/Cancel Button
Use this button to start the selected program. when the button
is pressed once, the light on the button will turn on.
Stop the program with the Start/Pause/Cancel button.
22
23
Operating the Dishwasher
Operating the Dishwasher
Cancellation of a Function
To cancel a program while the dishwasher is running:
• Open the door gently.
• Press and hold Start/Pause/Cancel button for 3 seconds. The
indicator light will start flashing.
• Close the door.
• The dishwasher will drain the water inside the machine for 2
minutes. At the end of the cycle, a beep will sound. You can choose
and start a new program.
WARNING
Depending on the stage of the program you have cancelled, there may
be detergent residue or rinse agent inside the machine and on the
dishes. Make sure the items in the dishwasher are not used before
washing properly. Ingestion or inhalation of detergent or rinse agent
may cause serious injury. Avoid contact with skin and eyes and keep
children and people in poor health away from these materials.
Rinse Agent Level Indicator LED
If this indicator light comes on, you need
to refill rinse agent. You can also tell
whether rinse agent must be refilled by
looking at the rinse agent dispenser.
when the visual fill indicator is dark, there
is enough rinse agent in the dispenser.
When the color is light, open the
dispenser and refill rinse agent.
• Open the door gently.
• Press Start/Pause/Cancel and select a new program.
• Press Start/Pause/Cancel again, to start.
WARNING
Salt Level Indicator LED
When this indicator light comes on, you must refill special salt. Only
use special dishwasher salt in your machine to soften the water.
Depending on the length of the terminated program, detergent and
rinse agent may still be in the dispensers. Ingestion or inhalation of
detergent or rinse agent may cause serious injury. Avoid contact with
skin and eyes, and keep children and people in poor health away from
these materials.
Changing Volume of Sound Indicator
Press and hold Function button for 5 seconds until S:03 appears on
the display. Every time you press the Function button, the warning
sound level will change as - - Off, S:01 Low, S:02 Medium, and S:03
High. After selecting the sound volume, wait for 10 seconds to save it.
Factory setting of your machine is S:03.
24
25
Operation
Operation
Program Change
To change the program selection while the dishwasher is running:
Operating the Dishwasher
Operating the Dishwasher
Detergent & Rinse Agent Dispenser
Filling the Detergent Dispenser
WARNING
•
•
•
Always store your detergent in locations which are cool, dry, and out of
the reach of children.
Check that the detergent dispenser is empty after the completion of
each wash program.
Dishwasher detergents can be dangerous if inhaled or swallowed.
Avoid contact with skin and eyes; keep children and people in poor
health away from the dishwasher when the door is opened. Consult a
doctor immediately if detergent has been swallowed or inhaled.
A
Open the detergent container by pushing the lock to the right A.
Pour/put the detergent into the dispenser.
Close the lid until it clicks in.
•
•
The detergent container holds a total of 40 ml/8 tsp. of detergent
Marking lines on the inside of the detergent container aid in providing the
correct amount of detergent. When the dishwasher is fully loaded and the
dishes are very dirty, we recommend filling the detergent container up to
the 25 ml/5 tsp. mark. When the dishes are less dirty, it is generally
sufficient to fill the detergent up to the 15 ml/3 tsp. mark.
The detergent amounts for the individual cleaning programs are shown in
the Program Table on page 21.
Fill amounts given are for standard powder detergent. Amounts may vary if
you use liquid or concentrated power detergent. Tablet detergents should
be placed in detergent container 1 with the cover closed.
Follow instructions on the package of the detergent when using liquid
dishwasher detergent, concentrated powder detergent, or tablet detergent.
Deviations are possible depending on how dirty the dishes are and how
hard the water is in your location.
If your dishes have been in the dishwasher for some time without being
washed, also fill the smaller container 2 up to the top.
NOTICE
•
•
•
Operation
•
•
Only use detergents suitable for dishwashers.
DO NOT use detergent in Rinse/Hold cycle.
DO NOT forget to pour/put the detergent into the dispenser before
turning on the machine.
Too much detergent may mean that the detergent does not dissolve
properly and dishes could get scratched.
Too much detergent in soft water may cause glass corrosion. DO NOT
use too much detergent if your water supply is soft.
•
•
•
•
•
If you do not know the hardness of your water supply, use 15 ml/3 tsp.
detergent. Increase the amount of detergent if you see white water
marks, especially on the surface of the glassware.
Find out the hardness of your water supply by asking your local water
department, water softener company, or county extension agent.
26
27
Operation
•
•
•
Operating the Dishwasher
Operating the Dishwasher
Filling Rinse Agent Dispenser
Setting the Water Softener (select models)
WARNING
Keep your rinse agents out of the reach of children. Ingestion or inhalation
of rinse agent may cause serious injury. Avoid contact with skin and eyes,
and keep children and people in poor health away from rinse agents.
NOTICE
•
•
•
•
Open the rinse agent dispenser by
pressing the lock B.
Carefully pour in rinse agent to the MAX
mark.
Close the lid until it clicks in 3.
Carefully wipe off spilled rinse agent.
Excessive rinse agent causes excessive
foam formation, which may hinder
cleaning.
Operation
Operation
•
•
Only use rinse agents suitable for use in dishwashers. Rinse aids allow
washing water to rinse off more cleanly and prevent watermarks or
streaks on the dishes.
If you use “2 in 1” or “3 in 1” detergents/tabs, you do not need
additional rinse agent.
• Press the Program Selection button before you switch the appliance
on and keep this button pressed down.
• Switch the appliance on using the On/Off button; then release the
switch.
• Release the Program Selection button when the water hardness
level stored on your machine is displayed in “r.....” format.
• Start/Stop icon will start flashing as soon as the water hardness level
store on your machine.
• Water hardness can be set to the desired level by pressing the Time
Delay button (compare the test strip with the degrees of Hardness
Table). The appropriate program lights up.
• Once you have set the hardness level, press the Start/Stop/Cancel
button to save the value. The control indicator on the
Start/Stop/Cancel button now lights up permanently.
• Switch the appliance off again using the On/Off button.
Set the Dose of Rinse Agent
The dose of rinse agent to be used can
be set by means of the dispenser
regulator 4 between levels 1 and 6.
Change the setting, only if the following
applies after washing:
•
•
Watermarks are visible on the dishes: Set
dosage higher.
Streaks are visible on the dishes: Set dosage lower.
28
29
Operating the Dishwasher
Operating the Dishwasher
NOTICE
35-90
Press the Time Delay button to switch
the water hardness level to position 5.
341-800
28-34
Press the Time Delay button to switch
the water hardness level to position 4.
271-340
23-27
Press the Time Delay button to switch
the water hardness level to position 3.
221-270
131-220
14-22
Press the Time Delay button to switch
the water hardness level to position 2.
81-130
9-13
Press the Time Delay button to switch
the water hardness level to position 1.
0-8
0-80
•
•
•
Filling the Dishwasher Salt Dispenser
CAUTION
Never use culinary or table salt. These types of salt do not dissolve in
water easily and will damage the function of the softening device.
37-47
24-36
19-23
13-18
7-12
NOTICE
0-6
1 mg of CaO/
1 L of water
(Hardness odF)
1 mg of CaO/
1 L of water
1 grain of CaCO3/
1 gal (US) of water
(Hardness odE)
PPM
American
•
•
•
30
Only use special dishwasher salt in your machine to soften the water.
DO NOT use coarse-grained salt. Small grains or powdered salt is
more easily soluble.
The manufacturer is not liable for damages resulting from the use of
the wrong type of salt.
6th Level
5th Level
4th Level
3rd Level
2nd Level
1st Level
Definition
•
Name of Unit
If the water hardness level is less than 7 American odE or less than 8
French odF, you do not need any special softening salt. In this case, the
“salt” control indicator lights up continually.
If your local hardness level exceeds 47 American odE or 90 French odF ,
you should consider getting a water softening device for your dishwasher.
If you use stream water or rainwater, you are advised to install filters.
If the water hardness adjustment is set to level 1, the “salt” control
indicator illuminates continuously although it is not necessary to use salt.
If you use salt under this condition, salt will not be consumed and the
lamp will not illuminate.
If you move, do not forget to adjust the water hardness level to suit your
new neighborhood.
If the model does not have a salt dispenser, ignore this changes. Water
hardness level must be in position 1.
31
Operation
Operation
French
Indicator in the Multi-Function display
•
Operating the Dishwasher
• Remove the lower rack from the machine.
• Open the screw-in cap of the salt container by turning it counterclockwise (Fig. A, B).
• When operating for the first time: Pour 1 liter of water into the salt
container (Fig C).
• Pour the salt into the container with the aid of the supplied salt
funnel (Fig. D). Pour in enough salt to fill the container. The
container holds approximately 2 kg/4.4 pounds.
• Close the cap tightly.
Care and Maintenance
WARNING
•
•
Before cleaning or carrying out maintenance, switch off the appliance,
disconnect the mains plug, and turn off the water tap.
DO NOT repair or replace any part of the dishwasher or attempt any
servicing unless specifically recommended by this manual. we
recommend that the dishwasher only be repaired by an authorized
service agent.
CAUTION
•
•
Operation
Operation
•
To avoid the possibility of slipping, keep the floor around the
dishwasher clean and dry.
Keep your appliance free from the accumulation of combustible
materials, such as lint, rags, and chemicals.
If the dishwasher is not in use for an extended period of time, we
recommend you check that the baskets are empty, leave the inside of
the dishwasher clean, the door cracked open to allow air to circulate,
and turn off both the power and water supply to the dishwasher.
CAUTION
Begin any wash program immediately after filling the salt container. The
washing program prevents damage to the machine which may be
caused by any spilled salt solution.
After the first washing cycle, the salt level indicator light will go out.
32
33
Care and Maintenance
Care and Maintenance
Caring for Your Dishwasher Exterior
Caring for Your Dishwasher Interior
NOTICE
CAUTION
Possible dishwasher damage: Abrasive cleaners, scouring pads, abrasive
cloths (paper towels) can damage the dishwasher door.
Cleaning your dishwasher at regular intervals ensures longer product life
and reduces the risk of recurring problems. Always disconnect the power
to machine before cleaning.
Cleaning the Control Panel
Use only soft cloth that is lightly dampened with mild detergent. Clean
the control panel only with a moist cloth and clear water.
Cleaning the Colored Doors
Use only light cloth that is lightly dampened with mild detergent.
Operation
Cleaning the Stainless Steel Doors
Use a soft cloth with a cleaner made for cleaning stainless steel. For
the best results, apply the stainless steel cleaner to a soft cloth and
wipe the surface in the direction of the grain.
Cleaning the Door Gasket
Regularly clean the door gasket with a damp cloth to remove food
particles and other debris. Use a gentle household cleaner for the
outside and the door seals, and rinse thoroughly.
CAUTION
When cleaning the underside of the main filter, care must be taken on the
sharp outer edge to avoid the risk of cut type injuries.
Cleaning the Filters
Clean the filters and the spray arms regularly. A dirty dishwasher will
have a negative effect on the cleaning results.
The following filters are to be cleaned:
1 Main filter
2 Coarse filter
3 Micro filter
Product Care
34
35
Care and Maintenance
Care and Maintenance
• Remove the lower rack from the machine.
• Turn the coarse filter counterclockwise to the left and pull it out in
an upward direction A.
• Pull out the main filter B.
• Press on the two tabs of the coarse filter and remove the micro filter
C.
• Clean the filters thoroughly under running water. Use a brush if
necessary.
• Replace main filter.
• Replace the micro filter and the coarse filter into the main filter.
• Twist it clockwise until it clicks into place.
Cleaning the Spray Arms
NOTICE
Dirt and/or calcium residue may block the nozzles on the spray arms. for
this reason, regularly check the spray nozzles.
1
2
•
•
•
•
•
•
•
Lower spray arm
Upper spray arm
Remove the lower rack from the machine.
Pull off the lower spray arm in an upward direction A.
Loosen the fastening screw of the upper spray arm and pull off the
spray arm B by a downward motion.
Clean the spray arms under running water.
Replace the lower spray arm in a downward direction.
Replace the upper spray arm and tighten the fastening screw by
turning it around to the left.
Insert the lower rack.
CAUTION
Made sure the fastening screw is tight on the upper spray arm.
CAUTION
DO NOT operate your dishwasher without a filter. You will damage your
To remove them, slightly push them
upwards (1) and then turn clockwise (2).
To replace the impeller, seat it into its
slot, push slightly upwards and turn it
counter clockwise until it is securely fitted. When the impeller is
released, check if it rotates without any obstruction.
36
37
Product Care
Product Care
machine. Ensure that your filters are correctly installed.
Check if the holes on the top of the
third spray arm are clogged. If they are
clogged, remove and clean them.
Troubleshooting
Troubleshooting
Poor wash results may not always be caused by the dishwasher. Please
review the following Troubleshooting Charts for possible remedies. You
may find the proper solution without having to call a service provider.
Problem
Possible Cause and/or Remedy
Dishes are not clean
Improper loading:
Load the dishwasher as suggested in this manual.
Wrong program selection:
Select a program that washes at a higher temperature
or takes a longer amount of time.
Poor Dishwashing Results
Problem
Possible Cause and/or Remedy
Dishwasher does not
start
Is the machine plugged in?
Are all fuses operative?
Is the water supply fully turned on?
Is the dishwasher door closed securely?
Have you pressed the On/Off button?
Dishwasher starts but
fails to circulate water
within 5 seconds
Cancel the program by pressing the Start/Pause
button for 5 seconds.
What if the “S:an” is not
displayed on the screen?
Dishwasher cycle was interrupted or the water
did not reach required temperature.
Door will not stay
down in open
position
Dishes are not dry
Spray arms are not turning:
Check if the spray arms are blocked from moving
freely.
Clogged filters:
Clean all filters as described in this manual.
Filters are not placed in their proper positions:
Check if all filters are placed in their proper positions.
Spray arm nozzles are clogged:
Clean the spray arms as described in this manual.
Overloaded racks:
Do not overload the racks.
Detergent is moist or clumping in box:
Store detergents in a dry location. Close the lid of the
container securely.
Adjust door tentioners (custom panel models
only, see Installation Guide).
Too little detergent:
Increase the amount of the detergent as per the
program table.
Improper loading:
Load the dishwasher as suggested in this manual.
Too little rinse agent:
Increase the amount of rinse agent and/or refill the
rinse agent dispenser.
Insufficient rinse agent supply:
Increase the dosage amount of rinse agent
and/or refill the rinse agent dispenser.
Dishes are removed too soon:
Do not empty your dishwasher immediately after
washing. Open the door slightly so that the
steam can escape. Begin with unloading the
dishwasher when the dishes are only hand warm.
Empty the lower rack first. This prevents water
from dripping off dishes in the upper rack.
Washing cutlery with worn surface:
Evaporation of water is more difficult with these
items.
Cutlery or dishes of this type are not suited for
dishwashers.
38
Washing cutlery with worn surface quality:
Cutlery of this type is not suited to dishwashers.
Tea, coffee, or
other stains
Wrong program selection:
Select a program that washes at a higher temperature
or takes a longer amount of time.
Detergent is moist or clumping in box:
Bleaches in cleaners lose their efficiency when stored
under unfavorable conditions. Store detergents in a
dry location. Close the lid of the container securely.
Using cutlery with a low surface quality:
Cleaning of these items is made difficult by their poor
surface structure. Cutlery or dishes of this type are not
for dishwashers.
39
Product Care
Product Care
Wrong program selection:
In short period programs, the wash temperature
and therefore the cleaning performance is lower.
Choose a program with a longer washing time.
The lid of the detergent dispenser remained open:
Always ensure that you close the detergent dispenser
lid after pouring in the detergent.
Troubleshooting
Troubleshooting
Problem
Possible Cause and/or Remedy
Problem
Possible Cause and/or Remedy
Calcium streaks,
misty appearance
Insufficient rinse agent supply:
Increase the dosage amount of rinse agent and/or
refill the rinse agent dispenser.
Rust stains,
destruction
of the surface
The lid of the salt container is not closed securely. Salt
loss (models with salt container):
• Salt can destroy metal surfaces and cause rust
damage.
• Check whether the lid of the salt container is firmly
closed. Use the funnel to pour in special salt. Begin
the Rinse and Hold program right after filling in salt.
After the program is complete, check whether the
lid may have loosened.
The hardness is not selected properly; too little salt is
being used:
Call water supplier and ask for local hardness in grains
per gallon or ppm.
Salt loss (models with salt container):
Check whether the lid of the salt container is firmly
closed. Use the funnel to pour in special salt. Begin
the Rinse and Hold program right after filling in salt.
After the program is complete, check whether the lid
may have loosened.
Smell
Food leftovers are staying on the dishes for too long:
Remove coarse dirt under running water and carry out
the Rinse and Hold program every two days without
detergent.
The machine is not grounded properly:
Check the grounding of the system. Static electricity
may eat holes into metal and cause irreparable
damages to surfaces.
Smell of new machine:
The smell of a new machine disappears after a few
wash cycles with detergent.
Cutlery parts from low-grade rust-free steel:
Rust on such items cannot be avoided. Cutlery or
dishes of this type are not suited for the dishwasher.
Filters are dirty:
Clean all filters as described in this manual.
Dirty dishes standing in the machine for a few days
without being washed:
Remove coarse dirt under running water and run the
Rinse and Hold program every two days without
detergent.
Dirty door gasket:
Regularly clean the door gasket with a damp cloth to
remove food particles and other debris. Use a gentle
household cleaner for the outside and the door seals,
and rinse thoroughly.
Fading of glasses,
china, porcelain
pattern
Fading of decoration on glasses and porcelain:
Glasses, porcelain, and cutlery of this type are not
suited for the dishwasher.
Excessive use of detergent when water hardness is
low:
• Add a smaller amount of detergent.
• Compare the water hardness level setting on the
dishwasher against the stated values from the local
water supplier.
• When water hardness is low (below 7 degree of
hardness or 106 parts per million),
DO NOT use salt even if your dishwasher has a
water softener.
40
Product Care
Product Care
Milky appearance or
rainbow on the
glasses (glass
corrosion)
Dish items with rust stains:
Rusty dishes may “infect” other items. Cutlery or
dishes of this type are not suited for the dishwasher.
41
Troubleshooting
Troubleshooting
Problem
Possible Cause and/or Remedy
Problem
Possible Cause and/or Remedy
Detergent residue
remains in the
dispenser.
Moisture in the detergent dispenser.
Ensure that the detergent dispenser is dry before
filling it.
Scratched dishes
Dish items/parts made from aluminum:
Dishes and cutlery of this type are not suited for the
dishwasher.
Detergent stays in the dispenser for too long.
Pour the detergent in just before washing.
The lid of the salt container is not closed securely. Salt
loss (models with salt container):
Check whether the lid of the salt container is firmly
closed. Use the funnel to pour in special salt. Begin
the Rinse and Hold program right after filling in salt.
After the program is complete, check whether the lid
may have loosened.
The lid of the detergent dispenser does not open.
When loading the dishwasher, take care to ensure
that you do not accidentally block detergent cup with
large dishware or utensils.
Detergent is moist or clumping in box.
Store detergents in a dry location. Close the lid of the
container carefully.
The hardness is not selected properly; too little salt is
being used:
Call water supplier and ask for local hardness in grains
per gallon or ppm. Adjust the water hardness level
setting accordingly.
Spray arm nozzles are clogged.
Clean the spray arms as described in this manual.
Detergents are being stored under unfavorable
conditions:
Detergents should not be stored longer than two
months in open packages. Store detergents in a dry
location. Close the lid of the container carefully.
Spray arms are blocked by dishware.
Make sure spray arms rotate freely.
Was the cycle terminated early?
Terminating the cycle early can leave detergent
residue in the dispenser.
Dishes break
Improper loading.
Load the dishwasher as suggested in this manual.
Overloaded racks.
Do not overload the dish rack. Dishes may hit
against each other and break.
Clean all filters as described in this manual.
Ensure that the drain hose is properly placed and
open.
Foam
The dishes are pre-washed by hand with a large
amount of dish detergent:
Dishes do not need to be pre-washed. Coarse dirt
may be removed with a dishcloth, or you may hold
the dishes under running water.
Rinse agent has accidentally leaked into the machine:
If rinse agent has been spilled during refilling, remove
the agent using a paper cloth or sponge.
42
43
Product Care
The cover of the rinse agent dispenser is not closed
securely:
Always take care to ensure that the lid is closed after
refilling the rinse agent dispenser.
Product Care
Water remains inside
the machine after
the rinse cycle.
Overloaded racks:
Take care to ensure that individual glasses and dishes
do not touch. They may hit against each other during
the washing process, causing scratches.
Service Information
Warranty
If service is required, call your dealer or authorized service agency.
The name of the authorized service agency can be obtained from the
dealer or distributor in your area.
BUILT-IN DISHWASHERS WARRANTY
THREE YEAR FULL WARRANTY
Built-in dishwashers and all of their component parts, except as detailed below*†, are warranted to be
free from defective materials or workmanship in normal residential use for a period of three (3) years from
the date of original retail purchase or closing date for new construction, whichever period is longer. Viking
Range, LLC, warrantor, agrees to repair or replace, at its option, any part which fails or is found to be
defective during the warranty period.
Have the following information readily available.
• Model number
• Serial number
• Date purchased
• Name of dealer from whom purchased
Clearly describe the problem that you are having. If you are unable to
obtain the name of an authorized service agency, or if you continue
to have service problems, contact Viking Range, LLC at
1-888-845-4641, or write to:
VIKING RANGE, LLC
PREFERRED SERVICE
111 Front Street
Greenwood, Mississippi 38930 USA
Record the information indicated below. You will need it if service is
ever required. The model and serial numbers are located on an
identification label attached to the left side of the tank. For access,
simply open the door of the dishwasher.
Model no. _____________________ Serial no. ________________________
Date of purchase _______________ Date installed ___________________
Dealer’s name __________________________________________________
Address ________________________________________________________
_______________________________________________________________
If service requires installation of parts, use only authorized parts to
insure protection under the warranty.
44
†FULL NINETY (90) DAY WARRANTY IN "RESIDENTIAL PLUS" APPLICATIONS: This full
warranty applies to applications where use of the product extends beyond normal residential
use, but the warranty period for products used in such applications is ninety (90) days.
Examples of applications covered by this warranty are bed and breakfasts, fire stations, private
clubs, churches, yachts, etc. Under this "Residential Plus" warranty, the product, its components
and accessories are warranted to be free from defective material or workmanship for a period
of ninety (90) days from the date of original retail purchase. This warranty excludes use of the
product in all commercial locations such as restaurants, food service locations and institutional
food service locations.
FIVE YEAR LIMITED WARRANTY ON NYLON RACKS, ELECTRONIC CONTROLS, MOTOR/PUMP
ASSEMBLY, AND WATER DISTRIBUTION SYSTEM COMPONENTS
Any upper and/or lower nylon rack which rusts through due to defective materials or workmanship and any
electronic controls which fail due to defective materials or workmanship in normal household use during
the fourth through fifth year from the date of original retail purchase will be repaired or replaced, free of
charge for the part itself, with the owner paying all other costs, including labor. Any motor/pump assembly
or water distribution system component as listed below which fails due to defective materials or
workmanship in normal household use during the fourth through fifth year from the date of original retail
purchase will be repaired or replaced, free of charge for the part itself, with the owner paying all other
costs, including labor.
Motor/Pump and Water Distribution System Components:
Circulation motor/pump
Lower wash arm
Drain motor/pump
Tube to upper wash arm
Fill valve
Upper wash arm
Diverter
LIFETIME LIMITED WARRANTY ON STAINLESS STEEL TANK AND LINER
Any stainless steel tank or inner door liner which develops a water leak due to defective materials or
workmanship in normal household use during the lifetime of the product will be repaired or replaced, free
of charge for the part itself, with the owner paying all other costs, including labor. This warranty excludes
surface corrosion or rust, scratches, discoloration, water or atmospheric conditions, or cleaning practices
which are part of normal residential use.
LIMITED LIFETIME WARRANTY
During the life of the product, any stainless steel parts found to be defective in material or workmanship
will be repaired or replaced, free of charge for the part itself, with the owner paying all other costs,
including labor. This warranty excludes surface corrosion or rust, scratches, discoloration, water or
atmospheric conditions, or cleaning practices which are part of normal residential use.
TERMS AND CONDITIONS
This warranty extends to the original purchaser of the product warranted hereunder and to each transferee
owner of the product during the term of the warranty and applies to products purchased and located in
the United States, Canada, Mexico and the Carribean (excluding the Dominican Republic, Cuba, and
Haiti). Products must be purchased in the country where service is requested. If the product or one of its
component parts contains a defect or malfunction during the full warranty period after a reasonable
number of attempts by the warrantor to remedy the defect or malfunction, the owner is entitled to either a
refund or replacement of the product or its component part or parts.
45
Product Care
Product Care
Keep this manual for future reference.
*FULL NINETY (90) DAY COSMETIC WARRANTY: Product is warranted to be free from
cosmetic defects in materials or workmanship (such as scratches on stainless steel,
paint/porcelain blemishes, etc.) for a period of ninety (90) days from the date of original retail
purchase or closing date for new construction, whichever period is longer. Any defects must be
reported to the selling dealer within ninety (90) days from date of original retail purchase.
Viking Range, LLC uses high quality processes and materials available to produce all color
finishes. However, slight color variation may be noticed because of the inherent differences in
painted parts and porcelain parts as well as differences in kitchen lighting, product locations,
and other factors. Therefore, this warranty does not apply to color variation attributable to such
factors.
Warranty
Replacement of a component part includes its free installation, except as specified under the limited
warranty. Under the terms of this warranty, service must be performed by a factory authorized Viking
Range, LLC service agent or representative. Service will be provided during normal business hours, and
labor performed at overtime or premium rates shall not be covered by this warranty.
Owner shall be responsible for proper installation, providing reasonable and necessary maintenance,
providing proof of purchase upon request, and making the appliance reasonably accessible for service.
The return of the Owner Registration Card is not a condition of warranty coverage. You should, however,
return the Owner Registration Card so that Viking Range, LLC can contact you should any question of
safety arise which could affect you.
This warranty gives you specific legal rights, and you may also have other rights which may vary from
jurisdiction to jurisdiction.
WHAT IS NOT COVERED BY THIS WARRANTY: This warranty shall not apply to damage resulting from
abuse, failure to provide reasonable and necessary maintenance, accident, delivery, negligence, natural
disaster, loss of electrical power to the product for any reason, alteration, outdoor use, improper installation,
improper operation, or repair or service of the product by anyone other than an authorized Viking Range,
LLC service agency or representative. This warranty does not apply to commercial usage.
LIMITATION OF REMEDIES AND DURATION OF IMPLIED WARRANTY
OWNER’S SOLE AND EXCLUSIV7E REMEDY FOR A CLAIM OF ANY KIND WITH RESPECT TO THIS
PRODUCT SHALL BE THE REMEDIES SET FORTH ABOVE. VIKING RANGE, LLC IS NOT
RESPONSIBLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGE, INCLUDING BUT NOT LIMITED
TO FOOD OR MEDICINE LOSS, DUE TO PRODUCT FAILURE, WHETHER ARISING OUT OF BREACH
OF WARRANTY, BREACH OF CONTRACT OR OTHERWISE. Some jurisdictions do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation or exclusions may
not apply to you. ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE APPLICABLE TO THIS PRODUCT ARE LIMITED IN DURATION TO THE
PERIOD OF COVERAGE OF THE APPLICABLE EXPRESS WRITTEN LIMITED WARRANTIES SET
FORTH ABOVE. Some states do not allow limitations on how long an implied warranty lasts, so the above
limitation may not apply to you.
WARRANTY SERVICE
To obtain warranty service, contact an authorized Viking Range, LLC service agent, or Viking Range, LLC,
111 Front Street, Greenwood, Mississippi 38930, (888) 845-4641. Provide model and serial number and
date of original purchase or closing date for a new construction. For the name of your nearest authorized
Viking Range, LLC service agency, call Viking Range, LLC.
IMPORTANT: Retain proof of original purchase to establish warranty period.
Specifications subject to change without notice.
46
47
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement