Fortin EVO ALL Nissan Rogue Push-to-Start Remote Starter Installation Guide
Below you will find brief information for Remote Starter EVO ALL Nissan Rogue Push-to-Start. This guide outlines the installation and programming procedures for the EVO ALL Remote Starter for the Nissan Rogue with push-to-start ignition. It includes wiring diagrams, connector details, required parts, and step-by-step instructions for programming the device.
PDF
Download
Document
Advertisement
Advertisement
Page 1 / 7 Rev.20140527 ROGUE GUIDE # 12811 ADDENDUM - SUGGESTED WIRING CONFIGURATION SCHÉMA DE BRANCHEMENT SUGGÉRÉ PUSH START NISSAN Rogue Push-to-start 2014-2015 OBD-II connector. Connecteur OBD-II. Copyright © 2014, Fortin Auto Radio Inc (+)Ignition (~)CAN HIGH Yellow Blue Jaune Bleue BCM located left side of steering column. BCM Situé a gauche de la column de direction. BCM Brown 16-Pin connector BCM Connecteur Brun de 16-pins (~)CAN LOW Pink Rose BCM Black 40-Pin connector BCM Connecteur Noir de 40-pins Copyright © 2014, Fortin Auto Radio Inc Copyright © 2014, Fortin Auto Radio Inc (+)12V Red Rouge (-)Start/Stop (-)Lock Yellow Brown Jaune Brun Copyright © 2014, Fortin Auto Radio Inc (-)Unlock Pink Rose BCM Green 40-Pin connector BCM Connecteur Vert de 40-pins BCM Black 24-Pin connector BCM Connecteur Noir de 24-pins (~)CAN HIGH Blue Bleue (~)CAN LOW Pink Rose Copyright © 2014, (+)Foot Brake Fortin Auto Radio Inc Black Noir HARDWARE VERSION : 3 FIRMWARE VERSION : 4.0+ Date: xx-xx EVO INTERFACE MODULE HARDWARE VERSION FIRMWARE VERSION VERSION DU MATÉRIEL VERSION DU LOGICIEL PATENTS PENDING US: 2007-228827-A1 Made in Canada Service No : (-)Door Pin Light Blue Bleue Pâle www.fortinbypass.com 000 102 04 2536 Minimum 5 72. [ 09 ] Nissan/Infiniti Parts required (not included) 1x OEM remote 1x TB-BOX (sold separately) 1x 10A Fuse 1x 1A Diode Copyright © 2014, Fortin Auto Radio Inc This manual may change without notice. www.ifar.ca for latest version. Ce Guide peut faire l'objet de changement sans préavis. www.ifar.ca pour la récente version. Minimum Pièces requises (non incluses) 1x télécommande d'origine 1x TB-BOX (vendu séparément) 1x fusible 10A 1x diode 1A This Guide may change without notice. www.ifar.ca for latest version. Ce Guide peut faire l’objet de changement sans préavis. www.ifar.ca pour la récente version. Page32 // 47 Page DESCRIPTION | DESCRIPTIONS LED | DEL Blue | Bleu : CAN COMMUNICATION Yellow | Jaune : IGNITION ON Red | Rouge : REMOTE START ON NOT INCLUDED NON INCLUS 2 PIN CONNECTOR: TB CONTROL (WHITE | BLANC) 4 PIN CONNECTOR: DATA-LINK (BLACK | NOIR) Red | Rouge Black | Noir Blue | Bleu White | Blanc 12V Battery (+) | 12V Batterie (+) Ground (-) | Masse (-) DATA DATA 20 PIN CONNECTOR: MAIN HARNESS | HARNAIS PRINCIPAL (WHITE|BLANC) Black | Noir Foot Brake | Frein (pied) Signal Pink | Rose Tachometer Yellow/Black | Jaune/Noir Trunk Release | Valise Hand Brake | Frein à Main Signal Brown/White | Brun/Blanc Hood Status | Capot Statuts Pink/Black | Rose/Noir See configuration Purple/Yellow | Mauve/Jaune Green/White | Vert/Blanc See configuration Green/Red | Vert/Rouge See configuration White/Black | Blanc/Noir See configuration Lt. Blue | Bleu Pâle See configuration 1 2 13 3 12 14 4 5 16 6 17 7 18 8 15 20 9 10 5 4 3 2 1 Copyright © 2012, FORTIN AUTO RADIO INC TOUS DROITS RÉSERVÉS KIA RIO - PUSH-TO-START VEHICLES EQUIPPED WITH AN OEM ALARM Some vehicles must be UNLOCKED to disarm the OEM alarm before remote start. Enable option #12 using the FlashLink Manager. When this option is enabled the module will automatically UNLOCK before remote start and LOCK after the vehicle has remote started. A Yellow | Jaune See configuration Purple | Mauve Lock | Verrouille Purple/White | Mauve/Blanc Unlock | Déverrouille Door Status | Statuts Portes Green | Vert White | Blanc Trunk Status | Statuts Valise Orange AUX 1 Orange/Black | Orange/Noir AUX 2 Dk. Blue | Bleu foncé GWR (Ground While Running) Red/Blue | Rouge/Bleu See configuration Lt. Blue/Black | Bleu Pâle/Noir See configuration 11 19 E B 5 PIN CONNECTOR: CAN-BUS (WHITE | BLANC) Brown | Brun CAN 1 WIRE (SW) Gray/Black | Gris/Noir CAN 2 LOW Gray | Gris CAN 2 HIGH Orange/Brown | Orange/Brun CAN 1 LOW Orange/Green | Orange/Vert CAN 1 HIGH C 6 PIN CONNECTOR: RELAY | RELAIS (RED | ROUGE) White/Red | Blanc/Rouge COMM2 6 White/Blue | Blanc/Bleu NO2 5 White/Green | Blanc/Vert NC2 4 Yellow/Red | Jaune/Rouge COMM1 3 Yellow/Blue | Jaune/Bleu NO1 2 Yellow/Green | Jaune/Vert NC1 1 D VÉHICULES ÉQUIPPÉS D'UNE ALARME D'ORIGINE Certains véhicules doivent être DÉVERROUILLÉS avant le démarrage à distance pour désarmer l'alarme d'origine. A c t i v e z l ' o p t i o n # 1 2 a v e c l e F l a s h L i n k M a n a g e r. Lorsque cette option est activée, le module déverrouille automatiquement avant le démarrage à distance et reverrouille après que le véhicule a démarré à distance. This Guide may change without notice. www.ifar.ca for latest version. Ce Guide peut faire l’objet de changement sans préavis. www.ifar.ca pour la récente version. Page33 // 47 Page Automatic transmission automatique KIA RIO - PUSH-TO-START WIRING CONNECTION | GUIDE DE BRANCHEMENTS A14 A13 A12 A11 A8 A5 A4 A3 A2 (-) HAND BRAKE (-) TRUNK RELEASE (+/-)TACHOMETER (+) FOOT BRAKE (-) WHILE RUNNING (-) TRUNK STATUS (-) DOOR STATUS (-) UNLOCK (-) LOCK ALWAYS REQUIRED TOUJOURS REQUIS IN RS10 OUT RS11 IN RS12 IN RS13 OUT RS14 IN RS15 IN RS16 OUT RS17 OUT RS18 CONTINUED NEXT PAGE/SUITE PAGE SUIVANTE START (+) RS8 OUT A14 RS7 OUT IGNITION1 (+) RS6 OUT IGNITION2 (+) RS5 OUT ACCESSORY (+) FOR MORE DETAILS & PICTURES, SEE : RS4 OUT PARKING LIGHT (+) POUR PLUS DE DÉTAILS ET POUR DES PHOTOS, VOIR : RS3 OUT PARKING LIGHT (-) .com 12V BATTERY (+) RS2 IN RS1 Ground | Masse (-) REMOTE STARTER DÉMARREUR À DISTANCE WITH | AVEC DATA-LINK: Direct connection Branchement directe WITH | AVEC DATA-LINK: GROUND NOT REQUIRED WITH DATALINK NON REQUIS EN DATA-LINK (+) (-) (-) (-) (-) Ignition Lock Unlock Door Status Trunk Status Yellow Purple Purple/White Green White Orange Orange/Black (-) Ground While Running Dk. Blue (+) Starter Red/Blue Lt. Blue/Black (+) Foot Brake Black (+/-) Tachometer Pink (-) Trunk Release Yellow/Black (-) Hand Brake Brown/White At Driver Door Pin Pink/Black Purple/Yellow Autolight Shutdown. Fermeture des Green/White lumières automatiques. Green/Red White/Black Lt. Blue IN IN IN OUT OUT IN IN IN IN OUT OUT IN OUT OUT IN A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 B HARDWARE VERSION FIRMWARE VERSION VERSION DU MATÉRIEL VERSION DU LOGICIEL Minimum A C C5 C4 C3 C2 C1 72. [ 09 ] 5 Nissan/Infiniti Brown Gray/Black Gray Orange/Brown Orange/Green D4 D3 D2 D1 Minimum CAN 2 LOW CAN 2 HIGH D6 COMM1 NO1 NC1 COMM2 NO2 NC2 D6 White/Red D D5 1A Diode A1 White/Blue White/Green Yellow/Red Yellow/Blue Yellow/Green D3 Cut (~)TRANSPONDER SIGNAL D1 A15 RS17 RS18 (-)DOOR TRIGGER (-)UNLOCK (-)LOCK Rogue Light Bleu Bleue Pâle Pink Rose Brown Brun 20 19 18 17 16 15 14 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 40 39 38 37 36 35 SEE NEXT PAGE VOIR PAGE SUIVANTE SOLD SEPARATELY | VENDU SÉPARÉMENT A19 Yellow Yellow Jaune Jaune 1312 11 10 9 8 7 6 5 4 3 2 1 32 31 30 29 28 27 26 25 24 23 22 21 12 11 10 9 8 7 6 5 C4 RS7 RS2 (+)BRAKE (~)CAN HIGH (~)CAN LOW (+)Ignition (+)12V Light Green Vert Pâle Bleu Bleue Pink Rose Yellow Jaune Red Rouge (-) START/ STOP 34 33 C3 D5 4 3 2 1 1 2 3 4 5 66 7 8 9 12 13 14 15 16 2 1 16 15 14 13 12 11 10 9 7 6 5 4 3 8 24 23 22 21 20 19 18 17 16 15 14 13 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 BCM Green 40-Pin Connector Back vue. BCM Black 40-Pin Connector Back vue. BCM Green 24-Pin Connector Back vue. BCM Connecteur vert de 40-Pin Vue de dos BCM Connecteur Noir de 40-Pin Vue de dos BCM Connecteur Vert de 24-Pin Vue de dos 10 11 OBDII Front view Vue de face 14 BCM Brown 16-Pin Connector Back vue. BCM Connecteur Brun de 16-Pin Vue de dos BCM located left side of steering column. BCM Situé a gauche de la column de direction. CONTINUED NEXT PAGE | CONTINUEZ À LA PAGE SUIVANTE This Guide may change without notice. www.ifar.ca for latest version. Ce Guide peut faire l’objet de changement sans préavis. www.ifar.ca pour la récente version. Automatic transmission automatique KIA RIO - PUSH-TO-START TB-BOX INSTALLATION | INSTALLATION DU TB-BOX Page34 // 47 Page CONTINUED NEXT PAGE / SUITE PAGE SUIVANTE 1 Open the vehicle OEM remote ------------------------------------------Ouvrez la télécommande d'origine du véhicule 2 Remove the valet key from the back of the OEM remote. ------------------------------------------- + Retirez la clé valet du dos de la télécommande d'origine. 3 TB-BOX INDUCTOR. --------------------------INDUCTEUR DU TB-BOX, VEHICLE KEY TRANSPONDEUR --------------------------TRANSPONDEUR DE LA CLÉ DU VÉHICULE Place the TB-BOX inductor beside the vehicle OEM remote transponder ------------------------------------------Placez l'inducteur du TB-BOX au transpondeur de la télécommande d'origine du véhicule 4 Secure the 2 pieces together with electric tape. ------------------------------------------Sécurisez les 2 pièces ensemble avec du ruban électrique. CONTINUED NEXT PAGE | CONTINUEZ À LA PAGE SUIVANTE This Guide may change without notice. www.ifar.ca for latest version. Ce Guide peut faire l’objet de changement sans préavis. www.ifar.ca pour la récente version. Page35 // 47 Page PROGRAMMING PROCEDURE | PROCÉDURE DE PROGRAMMATION 1 Press and hold the programming button: Insert the 4-Pin (DataLink) connector. 9 The LED will alternate between BLUE, YELLOW and RED flashes. x1 HOLD 2 RELEASE ON BLUE BLEU Appuyez et maintenir enfoncé le bouton de programmation: Insérez le connecteur 4 pins (Data-Link) 9 Les DELS alternent entre un flash BLEU, JAUNE et ROUGE. Release the programming button when the LED is BLUE. If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 1. Relâchez le bouton de programmation quand la DEL est BLEU. Si le DEL n'est pas BLEU débranchez le connecteur 4 pins (Data-Link) et allez au début de l'étape 1. 3 Insert the required remaining connectors. Insérez les connecteurs requis restants. Press the Push-to-Start button once to turn on the ignition. Appuyez 1 fois sur le bouton démarrage (Pushto-Start) pour allumer l'ignition. 4 x1 IGNITION ON FLASH RAPIDLY PRESS IGN ON ON 9 The BLUE LED will flash rapidly. 9 La DEL BLEUE clignotera rapidement. 5 x1 PRESS IGNITION OFF ON IGNITION OFF OFF Press the Push-to-Start button once to turn off the ignition. 9 The BLUE LED will turn off. Appuyez 1 fois sur le bouton démarrage (Pushto-Start) pour éteindre l'ignition. 9 La DEL BLEUE s'éteint. The module is now programmed. Le module est programmé. This Guide may change without notice. www.ifar.ca for latest version. Ce Guide peut faire l’objet de changement sans préavis. www.ifar.ca pour la récente version. Page36 // 47 Page REMOTE STARTER FUNCTIONNALITY | FONCTIONNALITÉS DU DÉMARREUR À DISTANCE START All doors must be closed. Remote start the vehicle. UNLOCK Unlock the doors with either: • The OEM remote • The remote-starter remote • Or the proximity remote Toutes les portes doivent être fermées Démarrez à distance. Enter the vehicle with the Intelligent Access Key. Entrez dans le véhicule avec la clé intelligente (Access • la télécommande d'origine Key) sur vous • la télécomande du démarreur à distance • ou la télécommande de proximté. Déverrouillez les portes avec sois If the doors are not unlocked with one of these conditions the module will lock the vehicle’s turn-knob as soon as any door is opened. Si les portes ne sont pas déverrouillées avec l'une de ces conditions, le module va verrouiller le bouton d'ignition à l'ouverture de l'une des portes. The vehicle can now be put in to gear and driven. Vous êtes maintenant prêt à embrayer et prendre la route. Page 7 / 7 HARDWARE VERSION FIRMWARE VERSION Date: xx-xx EVO-ALL INTERFACE MODULE PATENTS PENDING US: 2007-228827-A1 Made in Canada Service No : Notice: Updated Firmware and Installation Guides Updated firmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product. www.fortinbypass.com 000 102 04 2536 Module label | Étiquette sur le module Notice: Mise à jour microprogramme et Guides d’installations Des mises à jour du Firmware (microprogramme) et des guides d’installation sont mis en ligne régulièrement. Vérifiez que vous avez bien la dernière version logiciel et le dernier guide d’installation avant l’installation de ce produit. WARNING The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualified technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version. MISE EN GARDE L’information de ce guide est fournie sur la base de représentation (telle quelle) sans aucune garantie de précision et d’exactitude. Il est de la seule responsabilité de l’installateur de vérifier tous les fils et circuits avant d’effectuer les connexions. Seuls une sonde logique ou un multimètre digital doivent être utilisés. FORTIN SYSTÈMES ÉLECTRONIQUES n’assume aucune responsabilité de l’exactitude de l’information fournie. L’installation (dans chaque cas) est la responsabilité de l’installateur effectuant le travail. FORTIN SYSTÈMES ÉLECTRONIQUES n’assume aucune responsabilité suite à l’installation, que celle-ci soit bonne, mauvaise ou de n’importe autre type. Ni le manufacturier, ni le distributeur ne se considèrent responsables des dommages causés ou ayant pu être causés, indirectement ou directement, par ce module, excepté le remplacement de ce module en cas de défectuosité de fabrication. Ce module doit être installé par un technicien qualifié. L’information fournie dans ce guide est une suggestion. Ce guide d’instruction peut faire l’objet de changement sans préavis. Consultez le www.fortinbypass.com pour voir la plus récente version. Copyright © 2006-2012, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING TECH SUPPORT Tél: 514-255-HELP (4357) 1-877-336-7797 ADDENDUM GUIDE www.fortinbypass.com WEB UPDATE | MISE À JOUR INTERNET ">

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Push-to-Start Functionality
- Remote Start Capability
- Automatic Door Unlock/Lock
- Detailed Wiring Diagram
- Easy Programming Procedure
- Comprehensive Installation Guide
- Compatibility with Nissan Rogue
- Intelligent Access Key Integration
- Valet Key Support
- Secure TB-BOX Integration
Frequently asked questions
The minimum firmware version required is 4.0+.
Required parts include a 1x OEM remote, 1x TB-BOX (sold separately), 1x 10A fuse, and 1x 1A diode.
The programming procedure is detailed in the guide. It involves connecting the Data-Link connector, pressing the programming button, turning on the ignition, and following the LED prompts.
The remote starter will unlock the doors, allowing you to enter the vehicle with the Intelligent Access Key.
If the doors are not unlocked, the module will lock the vehicle's turn-knob as soon as any door is opened.