Manual for Wah Wah Guitar Effects Pedal

Manual for Wah Wah Guitar Effects Pedal
USER S MANUAL
GUITAR EFFECT MACHINE
Spesification
Guitar Effect Machine
Frequency range: 400Hz-2.5KHz
Maximum of output voltage:1.5V frequency of reference point: 1000Hz
Power supply: 9V
Dimension: 280 x 125 x 90 mm
Net Weight: 1.8kg
Operation instructions
By rocking your foot back and forth on the pedal,
you can change
the effect that the guitar effect machine has on the tone of your
instrument instantaneously. Toe down will give you more treble, heel
down will give you more bass.
The speed and amount of effect you
use depends on your style of playing.
When placing the pedal in one position, you will hear a boost in that
particular frequency. This boost can be used to add sustain and create
feedback of a desired overtone.
Guitar effect machine set-up instructions
Electric Guitar
Power Amplifier
Notice
This unit is shipped from the factory without a battery to prevent possible
damage from leakage. A 9-volt transistor radio battery must be installed
for operation if an AC adapter is not going to be used. We recommend
a high quality alkaline battery. The adapter jack requires a 5.5/2.1mm
coax plug. Most standard 9VDC AC adapters with greater than 20ma
current capability will work.
Insert a 9 volt battery and / or plug in AC Adapter. The effect machine
will operate on either power source.
To turn the pedal on, push the toe of the pedal down again, until you
feel another
click .
RY
BA
TTE
AR
BO
P. C
.
Run anther cord from your amplifier input into the effect machine output
jack.
D
Run a cord from your instrument to the effect machine input jack.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement