Datasheet for Probe Set with Stainless Tips

Datasheet for Probe Set with Stainless Tips
Model 6341, 6342, 6275
Replaceable Tip Precision
Electronic Probe
Standard Sheathed Banana Plug
Nominal .166" (4,21mm)
FEATURES:
MATERIALS:
Miniature probe is the perfect size for probing tiny, highdensity circuits.
Gold plated pogo pin tip keeps constant pressure on test
point for consistent readings.
Replaceable probe tips.
Safety design complies with all the latest standards.
Flexible Silicone insulated wire resists burning.
Right angle DMM plug fits most digital multimeters.
Probe Body: Insulation - Gray Santoprene® Rubber over
Polypropylene.
Right Angle Sheath Banana Plug:
Plug Body: Nickel Plated Brass.
Banana Plug Spring: Nickel Plated Beryllium Copper.
Insulation: Santoprene®
Wire: 20 AWG, gray silicon rubber 0.089 (2,26mm) O.D.
Probe Tips: Gold plated or Stainless Steel
RATINGS:
IEC 1010-2-031 Category III, Operating Voltage 1000 Vrms Max. For CE compliance: The 3” (76,19mm) Long Sharp Point
Stainless Steel Tip is not intended for hand-held use at voltage above 33 Vrms/70 Vdc.
Current: 3 Amperes
ORDERING INFORMATION:
Model: 6341
Model: 6342
Model: 6275
Model: 6354
(one red probe, one black probe with a set of all tip styles)
(one red probe, one black probe with model 6210 sharp point gold pogo pin tips)
(one red probe, one black probe with model 6213 sharp point stainless steel tips)
(replacement tips only, set of all tips)
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies.
Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 ([email protected])
For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com
Rev: 100
D1094722, D1094672, D1094674
Page 1 of 2
Model 6341, 6342, 6275
Replaceable Tip Precision
Electronic Probe
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies.
Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 ([email protected])
For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com
Rev: 100
D1094722, D1094672, D1094674
Page 2 of 2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement