the Kitchen Wizz Pro™
the Kitchen Wizz Pro™
Instruction Booklet
BFP800
CONGRATULATIONS
on the purchase of your new
Breville Kitchen Wizz Pro™
Contents
4
Breville recommends safety first
7
Know your Breville
Kitchen Wizz Pro™
10
Assembling your Breville
Kitchen Wizz Pro™
15
Basic processing techniques
– Pureeing with the
QUAD‰ blade
– Mixing and whipping with
the QUAD‰ blade
– Slicing, shredding and
grating with the multi function Discs
28
Food processing at a glance
– Processing tips
34
Care, cleaning & storage
37Troubleshooting
40Recipes
3
Breville recommends safety first
At Breville we are very safety conscious. We design and manufacture consumer products
with the safety of you, our valued customer, foremost in mind. In addition we ask that you
exercise a degree of care when using any electrical appliance and adhere to the following
precautions.
Important safeguards
Read all instructions
BEFORE USE AND SAVE FOR
FUTURE REFERENCE
• Carefully read all instructions before
operating and save for future reference.
• Remove any packaging material and
promotional labels before using the food
processor for the first time.
• Do not place the food processor near
the edge of a bench or table during
operation. Ensure the surface is level,
clean and free of water, flour, etc.
Vibration during operation may cause
the appliance to move.
• Do not place this appliance on or near
a hot gas or electric burner, or where it
could touch a heated oven.
• Handle the food processor and
attachments with care - remember the
blades and discs are razor-sharp and
should be kept out of reach of children.
• Always make sure the food processor is
completely assembled before operating.
The appliance will not operate unless
properly assembled.
• Ensure the OFF button has been
pressed, and the food processor is
switched off at the power outlet and
unplugged before attaching the quad
blade, dough blade, disc or
processing lid.
• Always secure the processing bowl onto
the motor base before attaching the
quad blade, dough blade or discs.
• Always operate the food processor with
the processing lid securely in position.
• Do not push food into the feed chute
with your fingers or other utensils.
Always use the food pusher provided.
4
• Keep hands, knives and other utensils
away from moving quad blade, dough
blade or discs.
• Do not place hands or fingers in the
bowl of the food processor unless the
motor, quad blade, dough blade or discs
have come to a complete stop.
• Ensure the OFF button has been pressed
to switch the motor off and the appliance
is switched off at the power outlet and
unplugged before removing the lid from
the bowl.
• Do not use attachments other than those
provided with the food processor.
• Do not attempt to operate the food
processor by any method other than
those described in this booklet.
• Ensure the motor, blades or discs
have completely stopped before
disassembling. Ensure the OFF button
has been pressed and the appliance
is switched off at the power outlet
and unplugged when not in use, if left
unattended and before disassembling,
cleaning or storing.
• Care should be taken when removing
the food from the processing bowl by
ensuring the motor, quad blade, dough
blade or disc, have completely stopped
before disassembling. Ensure the OFF
button has been pressed to switch the
motor off; the appliance is switched
off at the power outlet and unplugged,
before removing the lid from the bowl.
The processing bowl should then be
unlocked from the motor body and
the quad blade, dough blade or discs
carefully removed before attempting to
remove the processed food.
Breville recommends safety first
• Please do not crush ICE in the large or
small processing bowls. This will cause
damage to the blades (quad or mini
blade). We recommend that you use a
blender for ice crushing.
• Some stiff mixtures, such as dough
may cause the processing blade to
rotate more slowly than normal. If this
happens, do not process for longer than
1 minute.
• Do not process hot or boiling liquids allow liquids to cool before placing into
the processing bowl.
• Do not use the food processor on
slippery, unstable or uneven surfaces
such as a sink drain board.
• To protect against electric shock do not
immerse power cord, plug or motor base
in water or any other liquid.
• Do not move the food processor whilst
in operation.
• Do not leave the food processor
unattended when in use.
• Do not place any part of the food
processor in the microwave oven.
• Do not fill bowl above marked liquid
levels or 15 cup Dry level (shredding).
Always add drier or thicker ingredients
to the processing bowl prior to
adding fluids.
• Never remove the lid while the processor
is operating. Always use the
POWER/OFF button to stop the
machine before removing the lid.
• Keep the appliance clean. Follow the
cleaning instructions provided in
this book.
5
5
Breville recommends safety first
IMPORTANT SAFEGUARDS FOR
ALL ELECTRICAL APPLIANCES
• Unwind the power cord fully before use.
• Do not let the power cord hang over
the edge of a table, counter, touch hot
surfaces or become knotted.
• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure
they do not play with the appliance.
• It is recommended to regularly inspect
the appliance. Do not use the appliance
if power supply cord, plug or appliance
becomes damaged in any way. Return
the entire appliance to the nearest
authorised Breville Service Centre for
examination and/or repair.
• Any maintenance other than cleaning
should be performed at an authorised
Breville Service Centre.
• This appliance is for household use only.
Do not use this appliance for anything
other than its intended use. Do not use
in moving vehicles or boats.
Do not use outdoors.
SAVE THESE
INSTRUCTIONS
6
• The installation of a residual current
device (safety switch) is recommended
to provide additional safety protection
when using electrical appliances. It
is advisable that a safety switch with
a rated residual operating current
not exceeding 30mA be installed in
the electrical circuit supplying the
appliance. See your electrician for
professional advice.
CAUTION
To avoid possible malfunction of the
processing bowl’s auto switch, do not
place the processing lid in the locked
position when the appliance is not
in use.
CAUTION
The processing blades and discs are
extremely sharp, handle with care at
all times. Do not place hands, knives
or other utensils into the feed chute.
Always use the food pusher to push the
food down the feed chute.
KNOW
your Breville Kitchen Wizz Pro™
KNOW your Breville Kitchen Wizz Pro™
A
B
G
C
D
H
I
E
J
F
K
L
M
N
Q
O
Q
V
P
8
R
T
S
W
U
KNOW your Breville Kitchen Wizz Pro™
A. Small food pusher
For improved processing control of smaller
ingredients. It also doubles as a measuring
cup for adding/measuring ingredients.
The food processor will run continually
whether the small pusher is in or out.
B. Large food pusher
For pushing food down the feed chute.
The food processor will not start unless the
large pusher is in place correctly.
C. Extra wide feed chute
For larger ingredients.
D. Processing lid
Locks onto the processing bowl.
E. PULSE button
Press down and hold briefly for
short bursts of power. The motor will
automatically stop after the PULSE button
has been released.
F. POWER/OFF button
Provides power to the food processor unit
only. Start/Pause is required to be pressed
to start operating the food processor.
G. Feed chute safety system
Prevents the motor from operating unless
the bowl and lid are correctly locked in
position, and large feed pusher is inserted.
H. Silicone seal
Reduces the chance of leakage
while processing large volumes of
liquid ingredients.
I. Processing bowl with handle
15 cup bowl for dry ingredients and 10
cups for liquid (thick, wet ingredients e.g.
soups). The processing bowl locks onto the
motor base.
J. Count up & count down timer
Used to set desired time required for
processing. Can count up or down,
stopping the processor once the time is
reached in count down mode.
K. LCD display
Displays the timing function.
L. Direct drive motor base
2000W induction motor with safety
braking system.
M. Non-skid rubber feet
For added safety and stability.
N. Julienne disc
Use this disc for julienning vegetables.
O. Chip cutter
Use this disc for chipping vegetables.
P. Reversible shredder
Use one side for small/thin shredding and
the other side for coarse shredding.
Q. Adjustable slicer
Use this disc for slicing ingredients.
Able to slice from 0.5mm – 8mm thick.
R. Whisk/Emulsifying disc
Use this attachment for whisking of eggs
and cream.
S. QUAD‰ processing blade
Swift action for chopping, mixing,
whipping and blending a variety of
ingredients.
T. Dough blade
Blunt blade designed for a softer action of
combining dough ingredients.
U. Mini processing blade
Used for chopping, mixing, and blending a
variety of ingredients.
V. Disc spindle
Fits onto bowl drive coupling and is used
to hold the reversible shredder, julienne,
chip cutting, whisk and adjustable slicing
discs in position.
W. Storage container with lid
Used for storing all discs and blades when
they are not in use.
NOT SHOWN
Cleaning Brush
For cleaning the processor bowl, blades and
discs. The flat end is designed as a scraper to
remove food particles from crevices.
Plastic Spatula
For scraping the sides of the bowl helping to
process ingredients evenly.
Mini Processing bowl
For processing small volumes of ingredients.
Cord Storage
Cord can be pushed into the housing to
reduce length.
Breville Assist Plug
Ergonomic ring-pull design allows the
power plug to be easily removed from the
power outlet.
9
ASSEMBLING
your Breville Kitchen Wizz Pro™
ASSEMBLING YOUR BREVILLE Kitchen Wizz Pro™
Before first use
Before using your Breville food processor,
become familiar with all the parts. Remove
all packaging materials and promotional
labels, being careful when handling the
processing blades and discs as they are very
sharp. Wash the processing bowl, processing
lid and other attachments in warm, soapy
water. Rinse and dry thoroughly.
(Refer to cleaning, care and storage section).
3. If using a disc, first assemble the disc
spindle onto the bowl drive coupling.
Orientate the disc so that the side you
wish to use is facing upwards.
Hold the disc by the centre plastic
moulding and position the central hole
above the attachment spindle. Push
down firmly until fitted correctly. (Please
note that these discs only fit the larger
processing bowl).
1. Place the motor base on a dry, level work
surface. Place the processing bowl on to
the motor base with the handle in line
with the ALIGN HANDLE graphic on
the motor base. (See Figure 1).
Fig. 3
Fig. 1
2. Turn the processing bowl clockwise until
the handle aligns with the
TURN TO LOCK graphic.
The processing bowl should be securely
locked into position. (See Figure 2).
4. For using the processing blades,
carefully grasp either the quad blade,
dough blade or mini processing blade
using the central plastic support and
position it over the bowl drive coupling
and push down until inserted correctly.
If using the mini processing blade,
ensure the mini processing bowl is
assembled into the main bowl first.
Fig. 4
Fig. 2
11
ASSEMBLING YOUR BREVILLE Kitchen Wizz Pro™
5. Place the processing lid onto the
processing bowl so the feed chute is
slightly right of the bowl handle and
the arrow graphics are aligned
.
Holding the feed chute and pressing
down firmly at the same time, turn
the lid clockwise (as indicated by the
graphic) so the ‘Locking Tab’ on the lid
slots into the ‘Interlocking Safety Catch’
on the handle. The lid should be securely
locked into position.
Your food processor has POWER/OFF,
START/PAUSE and PULSE buttons
to give total control when processing
food. Press the START/PAUSE button
to switch the motor on and operate
continuously.
NOTE
The food processor will not start
unless the large food pusher is
inserted correctly into place.
Press the POWER/OFF button to
switch the motor off. When short bursts
of power are required, press the PULSE
button and hold down briefly, release,
then press again. The PULSE action
will automatically stop when the button
is released.
Fig. 5
NOTE
The food processor will not operate
unless both the processing bowl and
lid are correctly locked into position.
CAUTION
The processing blade (including
the mini bowl blade) and discs are
extremely sharp, handle with care at
all times.
6. Insert the power plug into a 230/240
volt power outlet and switch the power
outlet on.
7. Press the POWER/OFF button to turn
your food processor on. The red light
illuminates around the POWER/OFF
button to indicate that the processor
is on.
12
8. To set the timer, press the
buttons
located to the left of the timing window.
Time will move up by 5 second intervals,
from 0 to 30 seconds. From 30 seconds
to 2 minutes the time will increase in 10
second intervals and from 2 minutes to
9.59 minutes the time will increases in
20 second intervals.
9. Once the time is set, press the
START/PAUSE button and the timer will
start to count down.
Ensure the large food pusher is inserted
correctly into place. The food processor
will not start until pusher is in place.
Once the timer has finished, the
food processor will stop and go into
STANDBY mode. Three (3) beeps will be
sounded to indicate that the processing
is complete.
The processor incorporates a ‘Safety
Interlock System’ that ensures the unit
will not start without the large food
pusher in position. Processing will stop
automatically, once the large food pusher
has been removed from the lid. The chute
MAX fill graphic indicates the maximum
volume of food to be placed in the chute
for the pusher to activate the unit.
ASSEMBLING YOUR BREVILLE Kitchen Wizz Pro™
10. At the end of processing, always
wait until the blades or discs have
stopped spinning before unlocking
and removing the lid. To remove the
processing lid, ensure the POWER/OFF
button has been pressed, the power is
switched off at the power outlet and the
cord is unplugged from the power outlet.
Holding the feed chute and pressing
down firmly at the same time, turn the
lid anti-clockwise so that the arrow
graphics are no longer aligned.
NOTE
As a safety feature, the food processor
will automatically switch off when the
lid is unlocked; however, it is good
practice to manually switch off the
food processor using the POWER/
OFF button before removing the lid.
NOTE
Care should be taken when removing
the food from the processing bowl by
ensuring the motor, processing blade,
dough blade or discs have completely
stopped before disassembling. Ensure
the POWER/OFF button is pressed
to switch the motor off, the appliance
is switched off at the power outlet
and it is unplugged, before removing
the lid from the bowl. The processing
bowl should then be unlocked from
the motor body, then the quad blade,
dough or disc carefully removed
before attempting to remove the
processed food.
11. Remove the processing bowl (before
removing blade or discs) by turning it
anti-clockwise until the handle is in line
with the ALIGN HANDLE. Lift the bowl
off the motor shaft.
When removing the discs - carefully
remove by gripping the plastic hub on
the centre of the disc and lifting the disc
up and away from the pin on the spindle.
NOTE
Reassemble the food processor by
locking the bowl into position before
attaching blade, disc or lid.
13
ASSEMBLING YOUR BREVILLE Kitchen Wizz Pro™
Overload protection system
If the motor overloads, the food processor
will go to STANDBY mode and OVERLOAD
icon in the LCD starts to flash. The food
processor can still be switched off by
pressing the POWER/OFF button. To
operate the food processor again, allow the
machine to cool for approx 30 minutes.
Some stiff mixtures, such as dough, may
cause the dough blade to rotate more slowly
than normal. If this happens, do not process
for longer than 1 minute.
If the blades or discs should jam while
processing, ensure the POWER/OFF button
is pressed to switch the motor off. Switch
off the power outlet. Remove the processing
lid and adjust any food wedged between the
blade and the bowl or in the disc. Replace
the lid and proceed as normal. If this
occurs again, the processing bowl may be
overloaded, so remove some of the food and
process in smaller batches.
NOTE
The food processor is designed so
the motor will not operate without
the processing bowl and lid are
correctly locked into position and the
pusher inserted into the feed chute.
In the event that the food processor
starts without the lid correctly locked
into position, immediately disconnect
at the power outlet and return to
your local Breville Service Centre for
examination.
14
BASIC FOOD
PROCESSING
TECHNIQUES
for your Breville Kitchen Wizz Pro™
PAge header.....
BASIC
FOOD PROCESSING TECHNIQUES
The food processor can process food in a
variety of ways depending on which blade or
disc you choose.
Chopping with the QUAD‰
Processing blade
The quad blade chops raw and cooked
food to the consistency required, from
coarsely chopped to minced. For many
large processing tasks, the four blades will
cut the processing time needed to achieve
the desired results. The result depends on
the type of food and how long the food is
processed. Always remember to place the
quad blade into the processing bowl before
adding the food.
NOTE
To avoid over-processing check the
consistency frequently. For many
processing tasks we recommend to
use the PULSE button, as it may only
take a few seconds to fully process
the food to the desired consistency.
If necessary, press the POWER/OFF
button, unlock the lid and use the
spatula to scrape down the sides of the
bowl to ensure even processing.
Raw Vegetables, Fruit and Cooked Meats
Trim and cut food into 2.5cm cubes. Process
no more than 4 cups at a time using the
PULSE button at 1–2 second intervals until
chopped to desired size or consistency.
Spanish Onion wedges
Raw meat, chicken and fish
Trim and cut food into 2.5cm cubes. Ensure
all bones are removed. Chill well until
firm as this will help the quad blade to cut
through the food more readily. Process no
more than 4 cups (or 600g of raw meat) at a
time using the START/PAUSE button until
chopped or minced to desired size
or consistency.
Cubed Beef
16
Chopped Spanish Onion
Minced Beef
PAge header.....
BASIC
FOOD PROCESSING TECHNIQUES
NOTE
Heavy loads of meat may stall the
motor. This is indicated by the blade
turning slowly and the meat only
moving slowly around the bowl and
not processing. If this occurs remove
the meat and process in two batches.
Garlic, chilli and ginger
For garlic, peel cloves and leave whole.
For chilli, leave whole (remove seeds for
milder chilli). For ginger, peel and cut into
2.5cm cubes. Process until chopped to
desired consistency. Store chopped garlic
or chilli mixed with a little oil in an airtight
container in refrigerator for up to 1 week.
Mix ginger with a little sherry. If adding
garlic, chilli or ginger to other ingredients,
drop whole pieces down feed chute while
the motor is running.
Basil leaves
Nuts
Process no more than 4 cups (250g) shelled
nuts at a time using the PULSE button
at 1–2 second intervals until chopped to
desired size.
Shelled peanuts
Whole chillies
Chopped chillies
Herbs
Wash and dry herbs thoroughly. Remove
any coarse stems. Process no more than 2
bunches (approx. 4 cups) at a time using the
PULSE button at 1–2 second intervals until
chopped to desired size or consistency.
Chopped basil
Chopped peanuts
Dried fruit
As dried fruit can be sticky, place in freezer
for about 10 minutes (this prevents the fruit
sticking to the blades). Process no more
than 4 cups at a time using the PULSE
button at 1–2 second intervals until chopped
to desired size or consistency.
17
PAge header.....
BASIC
FOOD PROCESSING TECHNIQUES
NOTE
If chopping fruit to add to cake batter,
process the fruit before making the
batter, adding a little flour from recipe
quantity to prevent fruit sticking to
quad blade.
Hard boiled eggs
After cooking eggs to hard boiled stage,
allow to cool then remove shells and cut
eggs in half. Process no more than 12 eggs
at a time using the PULSE button at 1–2
second intervals until chopped to desired
size or consistency.
Soft breadcrumbs
Break stale bread into chunks (fresh bread
will stick to blades). Process no more than
4 cups at a time using the PULSE button
at 1–2 second intervals until crumbed to
desired consistency.
NOTE
For best results when making bread
crumbs, add one slice at a time.
Whole dried fruit
Chopped dried fruit
Citrus peel
Remove the peel from the fruit using a
vegetable peeler and cut into 2.5cm pieces.
Process no more than 4 cups at a time
together with ½ cup granulated sugar and
using the PULSE button at 1–2 second
intervals until chopped to desired size.
NOTE
The white pith between the skin and
citrus flesh is bitter, so carefully
remove the citrus peel ensuring the
white pith remains on the fruit.
NOTE
700g pkt sliced bread yields
approximately 10 cup soft
breadcrumbs. Freeze in one cup
portions for later use.
Dried breadcrumbs
Break bread into chunks and toast in oven
until golden and crisp. Do not over brown.
Process no more than 4 cups at a time using
the PULSE button at 1–2 second intervals
until crumbed to desired consistency.
Biscuit Crumbs
Break biscuits into quarters, measure
quantity and place into processing bowl.
Process no more than 4 cups at a time using
the PULSE button at 1–2 second intervals
until crumbed to desired consistency.
NOTE
Sweet or savory biscuit crumbs can
be used as an alternative to pastry for
sweet or savory pies.
18
PAge header.....
BASIC
FOOD PROCESSING TECHNIQUES
NOTE
After processing vegetables, add stock
through the feed chute, if necessary,
to make a smoother puree.
Creamed vegetable soups
Use same process as for cooked vegetables
above then with motor running, gradually
add no more than 4 cups stock and cream or
milk through the feed chute. Do not exceed
MAX liquid level.
Whole biscuits
Biscuit crumbs
Cake crumbs
Cut cake into small pieces, measure quantity
and place into processing bowl. Process no
more than 4 cups at a time using the PULSE
button at 1–2 second intervals until crumbed
to desired consistency.
Pureeing with the QUAD‰
Processing blade
The quad blade purees raw and cooked
food to the consistency required, including
baby food. For many large processing tasks,
the four blades will cut the processing
time needed to achieve the desired results.
Always remember to place the quad blade
into the bowl before adding the food.
NOTE
After pureeing the food, carefully
remove the quad blade and use the
spatula to scrape any food adhering to
the blade and the processing bowl.
Cooked pumpkin
Pureed pumpkin
Cooked meat and patés
Trim and cut cooked meat into 2.5cm cubes.
For chicken liver paté, leave livers whole.
Process no more than 4 cups at a time using
the START/PAUSE button until pureed to
desired consistency. For paté, add cream
through feed chute while motor is running.
NOTE
Add pan juices during processing if
mixture becomes too stiff.
Cooked vegetables
Peel and cut vegetables into 2.5cm cubes.
Ensure vegetables are well cooked and
softened before processing. Process no more
than 4 cups at a time using the
START/PAUSE button until food is pureed
to desired consistency.
19
PAge header.....
BASIC
FOOD PROCESSING TECHNIQUES
Peanut butter
Process shelled peanuts, no more than 4
cups at a time, using the START/PAUSE
button until pureed to desired consistency.
Note: mixture will form into a ball.
NOTE
2 cups peanuts will yield
approximately 1 cup peanut butter.
The natural oil in the butter will
separate on standing. Stir before use.
Shelled peanuts
Peanut butter
Fresh Fruit
Peel and cut fruit into 2.5cm cubes. Ensure
any pips or stones are removed. For hard
or firm fruit such as apples and pears,
cook until soft before processing. Process
no more than 4 cups at a time using the
START/PAUSE button until pureed to
desired consistency.
NOTE
Add stock, milk or gravy during
processing if mixture becomes too
stiff. If required, freeze excess mixture
in ice-cube trays, then repack in
freezer bags ready for use.
Mixing with the QUAD‰
Processing blade
The quad blade mixes ingredients for cakes,
batters, and egg-based sauces such as
mayonnaise. Always remember to place the
quad blade into the processing bowl before
adding the food.
Butter cakes
Place softened butter and sugar into the
processing bowl. Process using the
START/PAUSE button until mixture is
lightly creamed. With the motor running,
add eggs one at a time down the small feed
chute, mixing well after each addition. Add
liquid and dry ingredients to the mixture in
the processing bowl and process using the
PULSE button until folded through evenly. If
necessary, interrupt the processing, remove
the lid and scrape the mixture from the sides
of the bowl. Replace the lid and if adding
dried fruit, nuts etc. using PULSE button
until folded through evenly.
Baby food
Trim and cut cooked food (meat and/
or vegetables) into 2.5cm cubes. Process
no more than 4 cups at a time using the
START/PAUSE button until pureed to
desired consistency.
Creamed butter & sugar
20
Buttercake batter
PAge header.....
BASIC
FOOD PROCESSING TECHNIQUES
Dips and spreads
Using quad blade place ingredients into
the processing bowl and process using the
START/PAUSE button until ingredients are
mixed to desired consistency. If necessary,
during processing remove the lid and scrape
the mixture from the sides of the bowl.
Quad blade
Quick-mix cakes and batters
Use this method for melt ‘n’ mix cakes,
packet cakes and crepe batters. Place
all ingredients (starting with the liquid
ingredients) into the processing bowl
ensuring not to exceed MAX liquid level.
Process using the START/PAUSE button
until mixed to a smooth consistency. If
necessary, interrupt the processing, remove
the lid and scrape the mixture from the sides
of the bowl. Replace the lid and continue but
do not over-process the mixture.
Sorbet
For step one use the quad blade.
Step 1
Place ripe fruit and a sugar syrup into the
processing bowl and process until smooth.
Transfer this mixture to a plastic dish and
freeze until just starting to set. Return frozen
mixture to the processing bowl and using
the quad blade, process using PULSE button
until smooth. Return mixture to freezer as
before and repeat this process 2–3 times to
break down large ice crystals.
Step 2
Using the emulsifying disc, beat egg whites
until foamy using the emulsifying disc (see
Egg Whites in this section). Add frozen fruit
puree to egg white foam and process using
PULSE button until folded through evenly.
Freeze until ready to serve.
Milkshakes
Place milk, flavourings and ice-cream
into the processing bowl and using the
emulsifying disc, process using the
START/PAUSE button until frothy.
Do not exceed a MAX liquid level of 5
cups/1250ml.
Emulsifying disc. Use with the Disc Spindle.
WHIPPING WITH THE
EMULSIFYING DISC
Egg whites
NOTE
Although the quad blade can be
used for egg whites, for best results
we recommend the emulsifying disc
is used.
Ensure the processing bowl and emulsifying
blade are clean, dry and free of any fat
residue.
Place a minimum of 6 egg whites and a
pinch of salt into the processing bowl.
Process using the START/PAUSE button
until egg whites are foamy (about 1 minute).
With the motor running, slowly add 1
tablespoon lemon juice to help stabilise the
egg white foam.
21
PAge header.....
BASIC
FOOD PROCESSING TECHNIQUES
NOTE
Emulsifying disc is not dishwasher
safe. Please do not place in the
dishwasher. Wash by hand.
Egg whites
Egg sauces
(Mayonnaise, Hollandaise, Bearnaise)
Place a minimum of 6 egg yolks or 4
whole eggs into the processing bowl with
seasonings and vinegar use emulsifying
disc. Process using START/PAUSE button
until mixture is light and creamy
(about 2 minutes). Use emulsifying disc.
For Mayonnaise: use quad blade with the
motor running, slowly add oil through feed
chute until mixed to desired consistency.
Do not exceed MAX liquid level.
For Hollandaise or Bearnaise: with the
motor running, slowly add hot, melted butter
through feed chute until mixed to desired
consistency.
Do not exceed MAX liquid level.
Egg white foam
NOTE
When using the emulsifying
disc please insert disc and spindle
on to the food process and before
adding ingredients.
Dough blade
Whipped cream
Place 600ml well-chilled cream into the
processing bowl and using the emulsifying
disc, process using PULSE button until
whipped to desired consistency.
Kneading with the
dough blade
The edges of the plastic blade
provide a softer action for combining
dough ingredients.
Pastry and scone dough
Insert the dough blade into the bowl. Place
flour and cubed, chilled butter into the bowl.
Add 3 cups / 450g of flour and process
using PULSE button until butter is absorbed
into flour. While motor is running, quickly
add liquid through feed chute, processing
until mixture forms a ball of dough.
22
PAge header.....
BASIC
FOOD PROCESSING TECHNIQUES
Bread dough
Insert the dough blade into the bowl. Use
instant active dry yeast and include with
the dry ingredients in the processing bowl.
Add 3 cups / 450g, add softened, cubed
butter and process using the START/PAUSE
button until the butter is absorbed into the
flour. If using oil, with the motor running,
add the oil through the small feed chute
and process until the mixture forms a soft,
elastic ball of dough. Do not over process.
Transfer the dough to a lightly floured
surface and knead for a further 5 minutes if
necessary until soft and pliable. Place dough
into large, greased mixing bowl and stand
covered in a warm place until doubled in
size. Turn the dough onto a lightly floured
surface and knead again until smooth and
elastic. Shape the dough, allow to rise in a
warm area then bake in a hot oven.
Biscuit dough
Insert the dough blade (or you can use the
quad blade) into the bowl. Place softened
butter and sugar into the processing bowl.
Process using the START/PAUSE button
until lightly creamed. With the motor
running, add eggs one at a time down the
small feed chute, mixing well after each
addition. Place dry ingredients into the
processing bowl and use the PULSE button
until ingredients are just combined. Add
dried fruit, nuts, etc. through the small feed
chute and use the PULSE button until the
additions are folded through evenly.
Melt ‘n’ mix biscuits
Insert the dough blade into the bowl. Place
melted ingredients, followed by liquid
ingredients then dry ingredients into the
processing bowl. Process ingredients using
the PULSE button until just combined. If
necessary, interrupt the processing, remove
the lid and scrape the mixture from the sides
of the bowl. Replace the lid and continue but
do not over-process the mixture. Add dried
fruit, nuts etc. after this step using PULSE
button until folded through evenly.
shredding and grating with
the reversible shredder
Prepare fruit or vegetables by washing or
peeling first.
First cut the food to fit the length of the feed
chute (no more than 14cm). Food can be
shredded length ways to make a long shred.
If food fits without the need to cut, trim one
end so that it sits flat in feed chute.
Reversible Shredder
1. Place either the coarse or fine shredding
disc onto the disc spindle and then into
the processing bowl.
2. Prepare food as directed in the following
food categories or recipes.
Both thick and thin grating can be achieved
by using either the coarse or fine shredding
disc. Use one side of the disc for coarse
grating. Carefully turn over the disc so that
the process required is facing upwards.
23
PAge header.....
BASIC
FOOD PROCESSING TECHNIQUES
Cheese
Caution should always be taken when
processing cheese in a food processor. For
soft cheese such as Mozzarella, place into
freezer for 20–25 minutes or until well
chilled otherwise it will jam in the blades.
For hard cheese such as Parmesan, check
first that it is not too hard otherwise it will
damage the blades - the cheese should slice
easily with a sharp knife. For round cheese
such as Mozzarella, slice one end and pack
into the feed chute so the flat end is facing
the disc. For wedge-shaped cheese, pack
2 pieces side by side into chute to form a
rectangular shape (one piece with tip facing
down, other piece with tip facing up). Shred
as desired using a gentle pushing action
Slicing, with adjustable
slicing disc
To adjust slicing height, hold the adjustable
slicing disc outer edge with one hand, turn
the adjustment dial on the underside of the
disc to set the height.
An arrow graphic indicates the height to
which the blade is set.
NOTE
There may be slight variation in slice
thickness depending on the food
being processed and force applied
with the feed chute pusher.
Do not overfill the feed chute before slicing.
The pusher will not activate the unit if the
chute is overfilled. A MAX level graphic
indicates the maximum fill level.
WARNING
Adjustable Slicing Disc blade is sharp,
keep hands away from the blade.
Adjustable slicer
1. Place the adjustable slicer onto the disc
spindle in the processing bowl.
The adjustable slicer disc slices raw fruit
and vegetables to a consistent thickness
required. From fine 0.5mm to think 8.0mm
via 24 adjustable settings.
For many large processing tasks, the
adjustable slicing disc will cut the
processing time needed to achieve the
desired results. The result depends on the
type of food and how the food is positioned
into the feed chute.
For smaller foods, the small feed chute
provides greater control for
adjustable slicing.
24
2. Prepare food as directed in the following
food categories or recipes.
3. Pack food into the feed chute as directed
in the following food categories. For
smaller size food leave the large pusher
in place and use the small pusher
instead. The food should fit snugly so it
is supported upright in the feed chute,
but not so tight that it prevents the food
from easily moving down the feed chute
when guided by the food pusher.
PAge header.....
BASIC
FOOD PROCESSING TECHNIQUES
4. Process using the START/PAUSE button
whilst at same time, gently guiding the
food down the feed chute using the food
pusher. Never force the food down as
this will damage the discs.
Apply light pressure for soft foods such
as tomatoes and bananas; medium
pressure for firmer foods such as
potatoes and apples; and firm pressure
for hard foods such deli meats
and salami.
5. Repeat this process until all food has
been sliced, shredded or grated.
Round fruit and vegetables
Prepare fruit or vegetables by washing or
peeling, and coring or seeding (if necessary).
For small fruit and vegetables (e.g. kiwi fruit,
roma tomatoes), trim one end so the food
sits flat in the feed chute.
For large fruit and vegetables (e.g. apples),
cut in half (if required) to fit in the feed
chute. Pack into the feed chute with the
adjustable slicing disc at the slot number
required for the thickness.
Tomatoes in chute
Apples in chute
Sliced apples
Long fruit and vegetables
Prepare fruit or vegetables by washing or
peeling. First cut the food to fit the length
of the feed chute (no more than 9cm high
if loading vertically, 14cm long if loading
horizontally). If food fits without the need
to cut, trim one end so that it sits flat in feed
chute or the food should be able to lie on
the side if you require a long thin slice of
vegetable or fruit.
Pack food vertically or horizontally, into the
feed chute with cut side facing disc.
The small feed chute can be used for long
vegetables such as carrots and zucchini.
Sliced tomatoes
Zucchini in chute
Sliced zucchini
25
PAge header.....
BASIC
FOOD PROCESSING TECHNIQUES
WARNING
When slicing and shredding, always
use the food pusher to guide food down
the feed chute. Never put your fingers
or spatula into the feed chute. Always
wait for the disc to stop spinning
before removing the lid.
Leafy vegetables
For cabbage, wash and shake off excess
water. Cut into wedges to fit feed chute.
For lettuce, separate leaves, wash and dry
thoroughly, then roll up and pack vertically
into feed chute. Slice or shred.
NOTE
Slicing or shredding is not
recommended for spinach. To process
spinach, wash and dry thoroughly, tear
into pieces and use chopping blade or
quad blade.
Lettuce in chute
Sliced lettuce
Deli meats
Cut the meat to fit the length of the feed
chute (no more than 14cm).
Pack into the feed chute with cut side
facing disc.
26
Salami in chute
Sliced salami
Suet
Remove skin from suet and cut into pieces
large enough to fit feed chute. Partially
freeze until firm otherwise it will stick to the
blades causing them to jam. Pack into the
feed chute. Shred.
Chocolate
Break block of chocolate into pieces.
Chill until firm. Pack into the small feed
chute. Shred.
PAge header.....
BASIC
FOOD PROCESSING TECHNIQUES
Mini-Bowl function
The mini processing bowl can be positioned
inside the main processing bowl and is
used for processing small food quantities.
A mini processing blade is provided which
fits inside the mini bowl and can be used for
used for chopping, mixing and blending a
variety of foods.
Do not place the mini processing blade
into the main processing bowl. Main bowl
processing attachments will not operate in
the mini processing bowl.
Julienne disc
The Julienne disc is positioned on the disc
spindle in the main processing bowl and
cuts food into long thin strips. Common
items to be julienned include carrots,
zucchini, potato and celery. For longer strips,
use the large feed chute and lie the foods
down horizontally.
For shorter “match stick” size strips use the
small feed chute and pusher.
Large chipper
The chip cutting disc is positioned on the
spindle in the main processing bowl and
cuts food into long chunky lengths. This
disc is used primarily for potatoes, however,
a variety of foods can be used for this
application. If using large potatoes, lie them
down in feed chute for extra long strips.
For best results, position the pusher so that
firm pressure is applied onto the food to be
processed, before pressing the
START/PAUSE button.
NOTE
When processing with the chipping
disc, the last piece of each food
processed may become caught in the
cutting blade. This is normal, however,
the disc could become unbalanced. To
reduce vibration we recommend the
pusher is quickly removed from the
feed chute after each piece of food is
processed so the motor stops quickly.
Insert the next piece of food and
repeat the process.
With some foods it may be necessary to
remove the lid. Remove the disc from the
bowl, and clear the lodged food before
proceeding.
27
FOOD PROCESSING
AT A GLANCE
for your Breville Kitchen Wizz Pro™
FOOD PROCESSING AT A GLANCE
For more information about preparation of food and how to process, refer to basic processing
techniques.
For specific recipes, refer to the recipe section.
NOTE
The food processor is very powerful and recommended using PULSE function where
possible as to avoid over chopping or whipping.
FOOD
BLADE TYPE (Dough/
Quad/Mini)
ADJUSTABLE SLICING
BLADE THICKNESS
Avocado
Quad or mini
Use: Guacamole
2–5
Asparagus (cooked)
Quad or mini
Use: Asparagus Dip
Beetroot
Broccoli (cooked)
2–5
Shredding Use: Salad
Thin 1–2 and med 2–3
Use: Accompaniment
Shredding Use: Salad
0–5
Shredding Use: Salad
Quad
Use: Broccoli Soup
Cabbage
Carrot
Quad or mini
Use: Vegetable Soup
Cauliflower (cooked)
Quad or mini
Use: Cauliflower Soup
Celery
Quad or mini
Use: Vegetable Soup
Chilli
Quad or mini
Use: Seasoning
Eggplant
Quad or mini
Use: Accompaniment, soups
Garlic
Quad or mini
Use: Seasoning
Ginger
Quad or mini
Use: Seasoning
Herbs
Quad or mini
Use: Seasoning pesto
Leeks
Quad or mini
Use: Cooked for soups
Lettuce
Mushrooms (raw)
RECOMMENDED
DISC TYPE (Chip/
Shred/Julienne/
whisk)
Thin 1–2 med 2–3
Use: Salad
2–5
Use: Grilled eggplant
Shred or Julienne
Use: Accompaniment to
dishes
2–5
Use: Vegetable Soup
2–4
Use: Salad
Quad or mini
Use: Vegetable Soup
4–6 Use: Salad, vegetable
soup, mushroom sauce,
mushroom soup"
29
FOOD PROCESSING AT A GLANCE
FOOD
BLADE TYPE (Dough/
Quad/Mini)
ADJUSTABLE SLICING
BLADE THICKNESS
Mushrooms (cooked)
Quad
Use: Mushroom Soup
4–6 Use: Salad, vegetable
soup, mushroom sauce,
mushroom soup
Onion
Quad or mini
Use: Soups, Sauces
0–5
Use: Salad
Parsnip
Quad or mini
Use: Vegetable soup
2–5
Use: Vegetable lasagna
Parsnip (cooked)
Quad
Use: Accompaniment
Peas (cooked)
Quad or mini
Use: Accompaniment, baby
food
Potatoes
0.5 – 6
Use: Potato bake
Chip / Julienne /
Shredder Use: Chips
Shredder - Coarse or fine
Use: Salad
Potatoes (cooked)
Quad or mini
Use: Mash potato, Skordallia
Pumpkin
Quad or mini
Use: Pumpkin frittata
3–6
Use: Pumpkin sliced salad
Pumpkin (cooked)
Quad or mini
Use: Mash pumpkin, Pumpkin
soup, pumpkin scones
3–6
Use: Pumpkin sliced salad
Spinach
Quad or mini
Use: Accompaniment
Spinach (cooked)
Quad or mini
Use: Creamed spinach
Swede
Quad or mini
Use: Vegetable Soup, creamed
swede
Tomatoes
Quad or mini
Use: Salsa
Zucchini
2–5
Use: sandwich filling,
Tomato Bocconcini Salad,
tomato relish
3–6
Use: Accompaniment,
zucchini slice, gratin
Apple
Quad or mini
Use: Apple sauce
2–5
Use: Apple galette
Apple (cooked)
Quad or mini
Use: Baby food
4–6
Use: Fruit Salad
Banana
Quad or mini
Use: Dessert sauces
Berries
Quad or mini
Use: Fruit salad
Citrus Fruit
Quad or mini
Use: Fruit mince
30
RECOMMENDED
DISC TYPE (Chip/
Shred/Julienne/
whisk)
Shredder - Coarse or fine
Use: Salad, Frittata
FOOD PROCESSING AT A GLANCE
FOOD
BLADE TYPE (Dough/
Quad/Mini)
Citrus Peel
Quad or mini
Use: Fruit mince
Dried Fruit
Quad or mini
Use: Fruit salad, dessert sauce
Kiwi fruit
Quad or mini
Use: Fruit salad, dessert sauce
Mango
Quad or mini
Use: Fruit salad, dessert sauce
Melon
(Honeydew/
rockmelon)
Quad or mini
Use: Fruit salad
Pear
Quad or mini
Use: Fruit salad
Pear (cooked)
Quad or mini
Use: Baby food
Pineapple
Quad or mini
Use: Fruit salad
Stone Fruit (Apricot,
nectarine, peach,
plum)
Quad or mini
Use: Fruit salad, dessert sauce
Strawberries
Quad or mini
Use: Fruit salad, dessert sauce
Batters
Dough
Use: Cakes, crepes
Breadcrumbs
Quad or mini
Use: Coatings, breadcrumb
stuffing
ADJUSTABLE SLICING
BLADE THICKNESS
4–6
Use: Dessert decoration
4–6
Use: Pear pie
Whisk
Use: cakes, muffins,
crepes
Cheese
Shredder - Coarse or
Fine
Use: Grated Cheese
Chocolate
Quad or mini
Use: Chocolate Ganache
Cream Cheese
Quad or mini
Use: Dips, cheese cake
Doughs
Dough
Use: Pastry, scones, bread
Shredder - Coarse or
Fine
Use: Dessert decoration
Egg Whites
use PULSE function
Eggs (hard boiled)
RECOMMENDED
DISC TYPE (Chip/
Shred/Julienne/
whisk)
Whisk
Use: Egg foams (not
recommended for
meringue, pavlova)
Quad or mini
Use: Sandwich filling
2–5
Use: sandwich filling
31
FOOD PROCESSING AT A GLANCE
FOOD
BLADE TYPE (Dough/
Quad/Mini)
ADJUSTABLE SLICING
BLADE THICKNESS
RECOMMENDED
DISC TYPE (Chip/
Shred/Julienne/
whisk)
Eggs (whole or yolks)
use PULSE function
Whisk
Use: Mayonnaise
Cream
use PULSE function
Whisk
Use: recommended
PULSE function to avoid
over whipping
Milkshakes and
smoothies
Quad
Use: recommend using PULSE
function
Meat (raw)
use PULSE function
Quad
Use: Mince meatloaf, burgers
Meat (cooked)
use PULSE function
Quad
Use: Sandwich fillings, pate,
baby food
Meat (deli)
32
1–6
Use: Sandwiches, antipasto,
pizza toppings
FOOD PROCESSING AT A GLANCE
PROCESSING TIPS
• Do not fill the bowl above the liquid
MAX level for wet ingredients. Always
add drier or thicker ingredients to the
processing bowl prior to adding fluids.
• Note that there is a MAX THICK
LIQUID and MAX THIN LIQUID
markings on the processing bowl. Thick
liquid is soup and sauces (such as a
tomato base puree). Thin liquid is water
base stocks, milkshakes etc.
• To avoid over-processing when coarsely
chopping food, frequently check
consistency. It is also recommended
to use the PULSE function to avoid
over-processing food. Use the spatula to
scrape down the sides of bowl to ensure
an even texture.
• If chopping fruit to add to cake batter,
process before making batter, adding a
little flour from quantity recommended
in recipe to prevent fruit
sticking to blades.
• When crumbing bread for stuffing, use
stale bread as fresh bread sticks
to blades.
• Add liquid to pureed foods
after processing.
• Use the small feed chute when adding
liquid to processed mixtures.
• Peanut butter made in the food
processor will separate on standing.
Stir just before use.
• When processing a variety of
ingredients, it is not necessary to remove
them after each addition, unless they
exceed the MAX level marking.
• When mixing dry and wet ingredients,
the mixture will process more evenly
if the wet ingredients are placed in the
bowl preceding the dry ingredients.
• Egg white foams used for aerating
mixtures such as fruit sorbet, work
successfully. A minimum of 6 egg
whites successfully using a minimum of
6 egg whites. It is recommended to use
the whisk disc and PULSE function to
maximise the effect.
• Beating egg whites for pavlova or
meringue requires lengthy beating to
dissolve the sugar and entrap the air.
It is recommended to use the whisking
disc for best results.
• Before slicing and shredding, trim the
food to fit the feed chute. Do not overfill
beyond the level indicated.
• Before slicing and shredding softer
structured foods (such as meat), partially
freeze until just firm.
33
CARE, CLEANING
& STORAGE
of your Breville Kitchen Wizz Pro™
CARE, CLEANING & STORAGE
Care and cleaning
When finished processing, switch the food
processor off at the power outlet and unplug
the power cord.
Motor base
Wipe the motor base with a clean, damp
cloth after each use. Dry thoroughly with a
soft, clean cloth.
Processing bowl, lid and food pusher
Hand wash in hot, soapy water using a mild
detergent. Do not use a scourer or abrasive
cleaners as they will scratch the plastic
surface. The plastic parts may occasionally
be washed in the dishwasher (top shelf
only). It is not recommended on a regular
basis, as prolonged exposure to hot water
temperatures and harsh detergents will
damage and shorten the life of the plastic.
NOTE
Do not place food pusher in the
dishwasher as the heat may deform it.
Processing QUAD‰ blade, dough blade
and discs
Hand wash the bowl and lid. Use the
cleaning brush accessory to scrub stubborn
foods off the blades and discs. The handle
end of the brush is designed for scraping.
To avoid accidental cuts, do not leave quad
blade or discs to soak in sudsy water. The
quad blade, dough blade, discs and spindle
can also be washed in the dishwasher
(top shelf only).
NOTE
The quad blade cover can be
assembled onto the quad blade while
it is placed in the dishwasher for
added safety.
Food stains and odours
Foods such as carrot may leave a stain on
plastic parts whilst other foods such as
garlic may leave a strong odour. To remove
either, soak the parts for 5 minutes in 2
litres of water with ½ cup lemon juice added.
Rinse and wash as normal.
Storage
• Ensure the food processor is switched off
and unplugged at the power outlet.
• Ensure all parts of the food processor are
clean and dry.
• Carefully grasp the quad blade using
the spindle. The quad blade and mini
processing blade, should be stored in the
storage box when not in use. It is good
practise to store the quad blade inside
its cover and then inside the storage box.
The mini processing bowl can be stored
inside the main processing bowl when
not in use.
• Place the lid on top of the processing
bowl but DO NOT turn clockwise to the
locked position.
• Place the food pusher, with the
measuring cup inserted, into position in
the feed chute.
• It is advisable not to store the food
processor with the processing bowl or
lid locked onto the processing bowl as
unnecessary strain will be placed on the
operating and safety switches on the
processing bowl and the motor base.
• Place the discs in the storage container
and store in a safe place out of the reach
of children to avoid accidental cuts. It is
not recommended to store the discs in a
drawer with other utensils.
NOTE
The large chipper disc must be
placed in the back slot in the storage
container.
35
CARE, CLEANING & STORAGE
NOTE
The tools storage container can
stand upright on its back to save
cupboard space. Make sure it is fully
snapped close.
• Store your food processor upright on the
kitchen bench or in an easily accessible
cupboard.
• Do not place or store anything on top of
the food processor.
WARNING
The quad, mini and adjustable
processing blades and discs are
extremely sharp, handle with care at
all times.
Never immerse the motor base, power
cord or power plug in water or any
other liquid.
Never store your food processor
with the bowl fixed and lid locked
into position. Doing so will cause
unnecessary strain on the auto
operating switch on the handle of the
processing bowl and the automatic
safety switch on the motor base.
Do not put any part of the food
processor in the microwave oven.
36
TROUBLESHOOTING
PAge header.....
TROUBLESHOOTING
Problem
Easy Solution
Food is unevenly
processed
• Ingredients should be cut evenly into 2.5cm (1 inch) pieces
before processing.
• Ingredients should be processed in batches to
avoid overloading.
Slices are slanted or
uneven.
• Load food in feed chute. Place pusher onto food and apply
pressure. Then press start.
Food falls over in the
feed chute
• The large feed chute must be packed full for best results. If
processing smaller quantities, use the small feed chute.
Chipper disk
• Always clear any blocked potato from the chipper disc before
processing more potatoes.
Some food remains
on the disc after
processing
• It is normal for small pieces to remain after processing.
Motor slows down
when mixing dough
• Amount of dough may exceed maximum capacity. Remove
half and process in two batches.
• Dough may be too wet (see next page). If motor speeds up,
continue processing. If not, add more flour, 1 tablespoon at a time until the motor speeds up. Process until dough cleans
the side of the processing bowl.
Motor slow to start
with the Quad blade
• The amount of meat may have exceed the maximum
capacity. Remove the meat and process in two batches.
• Note that for best results trim the meat of fat
before processing.
The motor does
not start
• There is a safety interlock switch to prevent the motor
from starting if it is not properly assembled. Make sure
the processing bowl, lid and the pusher are securely locked
into position.
• If you are slicing or shredding and the above solution does
not work, make sure that the food contents in the feed chute
are cut below the maximum fill line so that the activation rod
can engage the motor.
• If the motor still will not start, check the power cord and
power outlet.
38
PAge header.....
TROUBLESHOOTING
Problem
Easy Solution
The food processor
shuts off during
operation
• The lid may have become unlocked; check to make sure it is
securely in position.
The motor
slowed down
during operation.
• This is normal as some heavier loads may require the motor
to work harder. Reposition the food in the feed chute and
continue processing.
• If the motor overloads, the 'OVERLOAD' icon in the LCD will
start to flash. Switch off by pressing the POWER/OFF button
and unplug the power cord. Allow the food processor to cool
for 20–30 minutes before resuming.
• The maximum load capacity may have been exceeded.
Remove some of the ingredients and continue processing.
The food processor
vibrates/moves
during processing
• Make sure the rubber feet at the bottom of the unit are clean
and dry. Also make sure that the maximum load capacity is
not being exceeded.
Dough doesn’t
fully incorporate
ingredients
• When kneading dough, always start the food processor
before adding liquid. Add liquid in a slow, steady stream,
allowing the dry ingredients to absorb it. If too much liquid
is added, wait until ingredients in the processing bowl have
mixed, then add remaining liquid slowly (do not turn off
the machine). Pour liquid onto the dough as it passes under
the feed chute opening; do not pour liquid directly onto the
bottom of the processing bowl.
Dough feels tough
after kneading
• Divide dough into 2 or 3 pieces and redistribute evenly in
processing bowl. Process 10 seconds or until uniformly soft
and pliable.
Dough is too dry
• While machine is running, add water through the small feed
chute, 1 tablespoon at a time until dough cleans the inside of the processing bowl.
Dough is too wet
• While machine is running, add flour through the small feed
chute, 1 tablespoon at a time until dough cleans the inside of the processing bowl.
39
RECIPES
RECIPES
Eggplant Dip
Roast Beetroot Dip
Makes approx 2 cups
Makes approx 2 cups
INGREDIENTS
INGREDIENTS
2 large eggplants
2 cloves garlic
1 tablespoon lemon juice
2 tablespoons olive oil
1 teaspoon sea salt
½ teaspoon ground cumin
2 tablespoons chopped fresh parsley
Freshly ground black pepper
4 medium (700g) beetroot
1 garlic bulb
2 teaspoons lemon juice
1 tablespoon horseradish
¼ cup (60ml) light olive oil
Salt and freshly ground black pepper
Turkish bread to serve
Fresh or toasted Lebanese bread
METHOD
1. Preheat oven to 200°C. Rub whole
eggplants all over with a little oil. Place
into a baking dish and bake for about 40
minutes or until skin is begins to darken.
2. Add garlic to baking dish and continue
baking eggplant and garlic until garlic
is softened and eggplants are blackened
and blistered all over. Remove from
oven.
3. Place eggplants into a plastic bag and
set aside until cool enough to handle.
4. Remove skin from eggplants and
discard, roughly chop the flesh. Insert
Quad blade into processor bowl and add
eggplant into the food processor bowl
with garlic, lemon juice, olive oil, salt
and cumin. Place lid on bowl.
5. Process until mixture is almost smooth,
scraping down the sides of processor
bowl if necessary.
6. Pour into bowl and stir through parsley
and season with black pepper.
METHOD
1. Preheat oven to 200°C. Wash beetroot
well and pat dry. Cut top off garlic
and place beetroot and garlic onto a
baking tray and drizzle with oil. Bake
for 30 minutes then remove garlic and
turn beetroot over and cook beetroot
for a further 15-20 minutes or until the
beetroot is tender. Set aside to cool
completely.
2. Once beetroot is cool peel off skin
and cut into quarters. Squeeze garlic
out of skin.
3. Insert Quad blade into processor bowl;
add beetroot and garlic and remaining
ingredients. Place lid on bowl.
Process until combined, scraping sides
if necessary.
Serve dip chilled with Turkish bread.
Serve dip with fresh or toasted
Lebanese bread.
41
RECIPES
Spinach, Parmesan and
Cashew Dip
Makes approximately 1 cup
INGREDIENTS
Hummus
Makes approx 2½ cups
INGREDIENTS
75g baby spinach leaves
1 clove garlic
75g parmesan, grated
1/3 cup (50g) unsalted toasted cashews
1/3 cup (80ml) olive oil
2 teaspoons lemon juice
salt and freshly ground black pepper
2 x 400g can chick peas, rinsed and drained
2 cloves garlic
1/3 cup (80ml) warm water
¼ cup tahini
¼ cup (60ml) lemon juice
1 teaspoon ground cumin
Sea salt and fresh ground black pepper to taste
Extra virgin olive oil, to serve
Crackers, to serve
Fresh Turkish or Lebanese bread to serve
METHOD
METHOD
1. Assemble food processor with the mini
processing bowl inserted.
2. Add ingredients except salt and pepper
into the processing bowl in the order
listed. Place lid on bowl.
3. Pulse mixture until all the ingredients
are chopped as desired; scrap down side
if necessary. Do not over process, it
should be slightly chunky.
1. Insert Quad blade into the processor
bowl; add chick peas, garlic, water,
tahini, lemon juice and cumin. Place lid
on processor bowl.
2. Process until mixture is smooth,
scraping down sides during processing
if necessary. Season to taste.
Season to taste and serve with crackers.
TIP
Dip will keep fresh for 1 day.
42
RECIPES
Thai Sweet Potato Soup with
Coriander Pesto
Serves 6
INGREDIENTS
400ml can coconut milk
1.5kg sweet potato, peeled and cut into 5cm
pieces
1 ½ litres chicken stock
Fish sauce, to taste
Lime wedges, to serve
Red Curry Paste
1 teaspoon shrimp paste (belcan), optional
10 dried long red chillies, seeds removed
2 cm piece galangal, peeled, thinly sliced
1 lemongrass, white part only, roughly sliced
6-7 coriander roots, scraped
6 kaffir lime leaves, stems removed and sliced
thinly
2 red shallots, halved
6 cloves garlic
1 teaspoon salt
1-2 tablespoons vegetable oil
Coriander Pesto
INGREDIENTS
1 cup coriander leaves (approximately 2
bunches)
¼ cup blanched almonds
1 small red shallot
2 teaspoons lime juice
2 tablespoon olive or vegetable oil
Salt, to taste
METHOD
1. To make the curry paste: Wrap shrimp
paste in a piece of aluminium foil.
Cook under a hot grill and cook for
1-2 minutes each side. Place chillies
in a heatproof bowl and cover with
boiling water; soak for approximately
15 minutes or until softened. Assemble
food processor with the mini processing
bowl inserted. Combine shrimp paste,
chillies and remaining red curry paste
ingredients into the mini bowl and
process until finely chopped.
2. Open can of coconut milk without
shaking; spoon the firm coconut into a
large saucepan and cook, stirring over
a medium high heat until the coconut
milk separates. Add the curry paste to
the pan and cook, stirring, until the paste
becomes fragrant.
TIP
If you can’t buy coconut milk that
has a firm top omit this step and use
1 tablespoon oil and add all coconut
milk in step 5.
3. Add sweet potato and stock to the pan
and bring to the boil. Reduce heat and
simmer for about 20 minutes or until the
sweet potato is soft.
4. Meanwhile, combine the coriander pesto
ingredients into the mini processing
bowl and process until combined.
Season to taste.
5. Once the sweet potato is soft, add
remaining coconut milk to the saucepan
and allow soup to cool.
6. Insert Quad blade into the processor
bowl; carefully spoon soup into bowl.
Place lid on processor. Process soup
until smooth; scrap down sides if
necessary. Return pureed soup to
saucepan to reheat; adjust the salt levels
of the soup with fish sauce to taste.
7. To serve ladle soup into bowls and
spoon coriander pesto into the soup. Stir
through and squeeze fresh lime to taste.
43
RECIPES
Leek and Potato Soup
Serves 4
INGREDIENTS
2 leeks, white part only
40g butter
750g potatoes, roughly chopped
1 litre chicken stock
Salt and white pepper, optional
Chopped chives, for garnish
METHOD
1. Assemble the processor with the spindle
and the variable slicer set to setting 3-4.
Slice leeks.
2. Heat butter and oil in a large saucepan,
add leeks and sauté for 3-4 minutes until
softened. Add potatoes and stock. Cover,
bring to the boil then simmer until
potatoes are soft. Allow the soup to cool.
3. Insert Quad blade into the processor
bowl; carefully spoon soup into bowl.
Place lid on processor. Process soup
until smooth; scrap down sides if
necessary.
4. Return pureed soup to saucepan to heat
through. Season to taste.
Serve soup topped with fresh chopped chives.
NOTE
If soup becomes too thick when
cooking or blending add a little extra
stock or water.
Chicken, Corn
And Ginger Soup
Serves 4
INGREDIENTS
1 tablespoon peanut oil
4 green onions, thinly sliced
5cm piece fresh ginger, finely chopped
3 cups fresh or frozen corn kernels
1 litre chicken stock
2 cups (500ml) water
2 tablespoons soy sauce
1 tablespoon shao xing cooking wine
½ teaspoon sesame oil
2 large chicken breast fillets, thinly sliced
¼ cup roughly chopped fresh coriander leaves
White pepper
METHOD
1. Heat oil in a large saucepan, add onions
and ginger and cook, stirring, for 2
minutes. Add corn and cook, stirring
occasionally, for a further 3-4 minutes.
2. Add stock and water and bring to the
boil; reduce heat and simmer for 10
minutes. Remove from heat and allow to
cool slightly.
3. Insert Quad blade into the processor
bowl; transfer half of the mixture and
process for 10-20 seconds. Return
pureed soup to remaining soup in
saucepan with soy, wine, sesame and
chicken. Cook on a medium high heat
until soup starts to simmer and chicken
is just cooked through.
Serve with fresh chopped coriander and white
pepper to taste.
44
RECIPES
Hawker Style Thai Fish cakes
Basic Pizza Dough
Serves 6-8 as part of an appetiser
Makes enough for four 30cm thin crust
pizzas or two 30cm thicker crust pizzas
INGREDIENTS
600g white fish fillets, such as red fish fillets or
snapper
2 tablespoons Thai red curry paste
2 tablespoons fish sauce
2 teaspoons white sugar
1 egg white
2 kaffir lime leaves, thinly sliced
80g green beans, finely sliced
Peanut oil for deep frying
INGREDIENTS
Dipping sauce
1. Assemble the food processor using
the Dough blade.
2. Add flour yeast, sugar, salt, olive oil
and water to the bowl.With the motor
running, slowly add the water through
the food chute. Process until dough
forms into a ball. Do not over process.
3. Remove dough and knead on a lightly
flour dusted surface to smooth. Place
dough ball into a lightly oiled bowl,
cover and rest in a warm drought free
place for 30 minutes or until dough has
doubled in size. Turn dough out on a
floured surface and knock back (punch)
the dough to remove excess air,
lightly knead.
4. For thin crust, divide dough into 4 x
170g dough balls and set aside until
required.
5. For thicker crust, divide dough into
2 even dough balls and set aside until
required
½ cup (110g) sugar
1
⁄3 cup (80ml) white vinegar
1 tablespoon fish sauce
½ Lebanese cucumber, seeded and finely diced
1 long red chilli, finely chopped
METHOD
1. To make the dipping sauce, combine
sugar, vinegar and 2 tablespoons cold
water into a small saucepan. Stir over
medium high heat until sugar has
dissolved, increase heat and bring to the
boil. Stir in fish sauce and cool complety.
Just before serving, stir through
cucumber and chilli.
2. Assemble the processing bowl using the
Quad blade. Cut fish into large cubes
and place into the processing bowl along
with curry paste, fish sauce, white sugar
and egg white. Place lid on bowl. Pulse
until ingredients are combined.
3. Carefully remove Quad blade and mix
through finely shredded kaffir lime
leaves and sliced green beans.
4. Heat oil in a deep fryer or wok.
5. Drop tablespoonful amounts in the hot
oil in batches and cook for 1–2 minutes
on each side or until fish cakes are
golden brown. Remove and drain on
paper towel. Repeat with remaining fish
cakes and serve with dipping sauce and
lime wedges.
3 cups (450g) bakers flour
3 teaspoons dry yeast
3 teaspoons sugar
3 teaspoons salt
1 tablespoon olive oil
1 cup (250ml) lukewarm water
METHOD
45
RECIPES
MARGHERITA PIZZA
INGREDIENTS
Herb Crusted Lamb Racks
Serves 6
170g pizza dough for thin crust (or one half of the
dough for thicker crust)
¼ cup pizza sauce
½ cup shredded mozzarella cheese
6 cherry tomatoes, quartered
1
⁄3 cup basil leaves, torn.
4 Bononcini balls, halved
Salt & pepper
Fresh basil leaves to serve
INGREDIENTS
METHOD
2 tablespoons olive oil
1. Preheat oven to 200¬°C no fan.
2. Roll out dough ball on a lightly floured
surface until pizza is to your desired
thickness. Place onto a floured pizza tray
and prick evenly with a fork.
3. Spread tomato sauce over pizza base;
sprinkle evenly with mozzarella cheese,
cherry tomatoes and basil.
4. Season with salt and pepper.
5. Bake for 10–15 minutes or until base is
cooked and crisp and topping is golden
and melted.
METHOD
Serve topped with torn slices of basil leaves.
46
4–5 slices day old white bread, crusts removed
2 tablespoons roughly chopped parsley
1 tablespoon roughly chopped rosemary
2 cloves garlic
1 teaspoon finely grated lemon rind
Salt and freshly ground black pepper.
¼ cup Dijon mustard
6 x 4 point lamb racks
1. Preheat oven to 180°C. Insert Quad
blade into food processor. Add bread,
herbs and garlic and rind. Place lid on
bowl and process until bread becomes
crumbs. Season with salt and pepper.
2. Spread the top of each lamb rack with
mustard and press bread crumb mixture
over the top.
3. Place racks of lamb in a baking dish with
olive oil, crust side down and cook for 10
minutes or until golden. Turn racks over,
and cook for a further 15-25 minutes or
until cooked as desired.
4. Remove from pan, cover loosely with
foil and allow to stand for 10 minutes
before carving.
RECIPES
Slow Cooked Indonesian
Beef Curry
Serves 8-10
INGREDIENTS
Curry paste
8 cloves garlic
6 eshallots, roughly chopped
6cm piece ginger, sliced
6 long red chillies, trimmed and roughly chopped
1 tablespoon ground coriander
1 tablespoon ground cumin
½ teaspoon freshly ground black pepper
2 teaspoons salt
2 tablespoons vegetable oil
3. Reduce heat to medium and stir in
curry paste. Cook 2-3 minutes or until
fragrant. Place slow cooker pan into
housing; add curry paste and stir to coat
meat in curry paste Add cardamom,
cinnamon, water and potatoes. Cover
and cook on High 4-5 hours or Low
7–8 hours.
4. In the last hour of cooking stir through
coconut milk, tamarind and coriander.
Taste and adjust seasoning with salt or
extra tamarind.
TIP
Recipe can be cooked in oven at 170°C
for 2 ½ -3 hours.
Curry
INGREDIENTS
2-3 tablespoons vegetable oil
3kg chuck steak (or gravy beef), cut into 5cm
dice
6 cardamom pods
2 cinnamon sticks
1 cup (250ml) water
1 small (500g) sweet potato cut into 5cm chunks
2 medium (500g) potatoes, cut into quarters
2 x 270ml cans coconut milk
1
⁄3 cup Tamarind paste
1 bunch coriander leaves and stem chopped
Method
1. For the curry paste, assemble food
processor with the mini processing bowl
inserted. Place all ingredients except
oil into the mini bowl and process until
finely chopped. Pour in oil and process
until smooth; set aside.
2. Heat 1 tablespoon of the oil in a non
stick frying pan over medium high heat.
Add one quarter of the beef and cook,
stirring, until browned; transfer meat
to slow cooker pan and repeat with
remaining oil and beef.
47
RECIPES
Goats Cheese and Leek Tart
Serves 6-8
INGREDIENTS
2 leek, white part only
80g butter
1 tablespoon olive oil
1 tablespoon chopped fresh thyme
Sea salt and freshly ground black pepper
80g goats’ cheese
300ml cream
4 eggs
Extra sprigs of thyme
Pastry
250g plain flour
135g chilled butter, cubed
1 egg
1-2 teaspoons cold water
METHOD
1. To make the pastry, assemble the food
processor using the Quad blade.
2. Place flour and butter into the
processing bowl. Process ingredients
until mixture resembles a fine crumble.
Add egg and water and process until
mixture forms a ball. Do not over
process.
TIP
Add the water gradually as you may
not need it all.
3. Lightly knead dough by hand until
smooth and shape into a disc. Cover
with plastic wrap and refrigerate for 20
minutes.
4. Preheat oven to 180°c. Lightly greasea
25cm x 3cm cm loose base round
flan tin.
48
5. Assemble the processor with the spindle
and the variable slicer set to setting 3–4.
Slice leeks.
6. Heat butter and oil in a frying pan over
a medium heat; add leeks and cook,
stirring, until the leeks have softened.
Add the chopped thyme and cook for
a further minute. Season with salt and
pepper and set aside.
7. Roll dough between two sheets of
baking paper large enough to line tin;
line flan tin with pastry. Using a fork
press several holes around the middle
of the pastry. Line tin with baking paper
and fill with baking beads or uncooked
rice. Bake in oven for 15 minutes;
remove beads and paper and bake for a
further 5 minutes.
8. Spread leeks over the base of the
pastry and sprinkle with goats’ cheese
and top with extra sprigs of thyme.
Whisk together cream, eggs, salt and
pepper; pour over egg mixture. Bake in
preheated oven for 30 minutes or until
set. Allow to cool for 30 minutes
before serving.
RECIPES
Spicy Chicken Patties
Serves 6–8 as part of an appetiser
INGREDIENTS
2 long red chillies, seeds removed and halved
2 stalks lemongrass, white part only, roughly
chopped
2 cloves garlic
5cm knob ginger, peeled and sliced
800g chicken breast, diced into large pieces
½ cup picked coriander leaves
¼ cup fish sauce
2 teaspoons sesame oil
Vegetable oil for shallow frying
2. Place chillies, lemongrass, garlic and
ginger into the small chopper bowl and
process until finely chopped. Transfer
to large processor bowl with the
Quad blade inserted and add chicken,
coriander, fish sauce and sesame oil.
Process until meat is finely minced and
paste is evenly distributed – about 5
seconds.
3. Wet hands with cold water and form
chicken into small patties. Cook patties
in vegetable oil over medium heat for
4-5 minutes or until golden on the
outside and cooked through.
Serve with sweet chilli sauce
Sweet chilli sauce
INGREDIENTS
1 cup (250ml) rice wine vinegar
¾ cup (165g) white sugar
2 large read chillies, seeds removed, finely
chopped
METHOD
1. To make the dipping sauce: Combine
the vinegar, sugar and salt in a small
saucepan. Cook, stirring over a low heat
until the sugar has dissolved. Increase
heat to high and cook for about 5
minutes or until the liquid has reduced
and is syrupy. Remove from heat; stir in
chillies and set aside until cool.
49
RECIPES
Homemade Butter
Pesto Sauce
Makes about 1 cup
Makes approx 1½ cups
INGREDIENTS
INGREDIENTS
600ml good quality pure cream
Fine salt (optional)
2 cups firmly packed basil leaves (approx 1 large
bunch basil)
2 cloves garlic
2 teaspoons lemon juice
1
⁄3 cup pine nuts, toasted
60g grated parmesan cheese
½ cup olive oil
Salt and freshly ground black pepper
METHOD
1. Assemble food processor with the
emulsifying disc.
2. Pour cream into bowl and process
for 2–3 minutes or until the butterfat
separates from the buttermilk. Pour
out buttermilk and add about 1 ½ cups
chilled water to the processor bowl.
Process again for 2–3 seconds. This
rinses the buttermilk from the butter.
Strain into a piece of muslin and gently
squeeze to remove any excess water.
3. For salted butter; place butter into the
small bowl of the food processor and add
salt. Process for 3-4 seconds to combine.
4. Place in a container and refrigerate. Will
keep refrigerated for 1-2 weeks.
Variations:
Fresh garlic for garlic butter, light olive oil
to make spreadable butter.
Recipe can be halved.
50
METHOD
1. Insert Quad blade into processor
bowl. Add all ingredients in the order
listed. Place lid on bowl. Pulse until all
ingredients are very finely chopped and
almost smooth. Scrape down sides of
bowl if necessary.
2. Spoon into an airtight container and
chill until ready to use.
TIP
Pesto will keep in an airtight
container in the refrigerator for a few
days. Pour a little extra oil over the
top of the pesto and place a piece of
plastic wrap on top of the pesto. This
will prevent excess browning.
RECIPES
Nasi Goreng
Serves 6
INGREDIENTS
4 eggs
1
⁄3 cup (80ml) vegetable oil
1 onion, quartered
3 cloves garlic,
2 long red chillies, finely sliced
2 teaspoons shrimp paste
1 teaspoon ground coriander
2 teaspoons sugar
2 small chicken breast, thinly sliced
300g raw school prawns, peeled and deveined
¼ small Chinese cabbage, finely shredded
6 cups cold long grain rice
¼ cup (60ml) kecap manis
2 tablespoons soy sauce
4 green onions, sliced
Garnish with thinly sliced cucumber and carrot
strips and crisp fried Asian shallots
4. Add sliced chicken and stir fry for
2–3 minutes to seal. Add prawns and
cabbage and continue cooking for a
further 5 minutes.
5. Stir in cold rice, breaking up any lumps,
until the rice is heated through. Add
sauces and green onions.
Serve topped with cucumber and carrot strips
and Asian shallots.
TIP
Shrimp paste is available in the Asian
section of your supermarket.
METHOD
1. Beat eggs together until well mixed
and foamy. Pour in heated, oiled, wok
and tilt to spread egg to form a thin
omelette across the base of pan. Cook
1-2 minutes, or until just set. Roll up
omelette to form a cylinder and remove
to a plate. Cool slightly and cut into thin
strips. Set aside to cool.
2. Combine onion, garlic, chillies, shrimp
paste, coriander and sugar into the small
bowl of the food processor and process
until it forms a paste. You may need to
add a little oil or water to enable the
ingredients to blend properly.
3. Heat remaining oil on a medium-high
heat. Add paste and cook for 1–2 minutes
or until fragrant.
51
RECIPES
Apple Teacake
Serves 12
INGREDIENTS
2 pink lady apples
3 x 50g eggs
1 cup (250ml) milk
1 teaspoon vanilla extract
180g butter, melted
1 ½ cups (330g) caster sugar
3 cups (450g) self raising flour
1 ½ tablespoons demerara sugar
2 tablespoons apricot jam, warmed and sieved
Double cream, to serve
METHOD
1. Preheat oven to 160°C with fan. Grease
and line a 25cm springform cake pan
with baking paper.
2. Assemble the food processor using the
variable slicer set to a thin slice. Cut two
sides from each apple as close to the
core as possible. Put the halves together
and place apples into large feed shoot so
that as they slice long thin slices will be
produced. Remove apples and set aside.
Place quad blade into processor bowl.
3. Place eggs, milk, vanilla, melted butter,
sugar and flour in the order listed into
the processor bowl.
4. Process mixture until just combined.
Scrape down any caught flour if needed.
5. Spoon mixture into prepared pan and
use a spatula to smooth top. Arrange
apple slices over cake making sure
that each apple overlaps each other.
Sprinkle with 1 tablespoon of the sugar.
Bake in oven for about 60 minutes
or until a wooden skewer inserted
comesout clean.
52
6. While cake is still in pan brush apples
with apricot jam and sprinkle with
remaining sugar. Allow to cool for 5
minutes then remove from pan and
allow to cool on a cooling rack.
TIP
Have all your ingredients measured
out to save time and minimise the
amount of time the apples have to
start browning.
RECIPES
Banana Cake with
Lemon Icing
Serves 10
INGREDIENTS
200g butter, room temperature, chopped
1 ½ cups caster sugar
2 x 60g eggs
1 ½ cups (approx 3 large) very ripe mashed
bananas
1 teaspoon vanilla extract
2 ¼ cups (335g) self raising flour
1 teaspoon ground cinnamon
½ cup (125ml) buttermilk
4. Spoon mixture into prepared tin and
bake for about 60 minutes or until
cooked when tested with a skewer.
5. Allow cake to cool in pan for 5 minutes
before transferring to a wire rack to cool
completely.
Serve with Lemon Icing.
To make lemon icing:
1. Place icing sugar mixture and lemon
rind into the bowl of the electric mixer.
While on speed 4-5 speed pour in lemon
juice and butter. Mix until combined.
2. Spread on cooled cake.
Lemon Icing
3 cups (480g) icing sugar mixture, sifted
1 teaspoon grated lemon rind
2 tablespoons lemon juice
100g butter, melted
METHOD
1. Preheat oven to 180°C no fan (160°C
with fan). Grease and line base and
sides of a 23cm cake tin.
2. Place Quad blade into processor bowl.
Combine butter and sugar in bowl
and process until well combined. Add
eggs, one at a time and pulse until just
combined. Add bananas and vanilla and
pulse again until combined.
3. Add dry ingredients and buttermilk and
process until just combined.
53
RECIPES
Individual Sticky
Date Pudding with
Butterscotch Sauce
Makes 12
INGREDIENTS
200g dried dates, coarsely chopped
1 teaspoon bicarbonate soda
1 ¼ cups (310ml) boiling water
60g butter, softened
1 cup (220g) firmly packed brown sugar
1 (150g) cup self raising flour
2 eggs lightly beaten
Butterscotch Sauce
1 ¼ cups (275g) firmly packed brown sugar
1 cup (250ml) pouring cream
125g butter
METHOD
1. Preheat oven to 180°c. Grease 8 holes of
a 1⁄3 cup capacity muffin tray.
2. Place dates, bicarbonate soda and
boiling water into a heat proof bowl and
stand for 5 minutes.
3. Insert Quad blad into processor bowl.
Add date mixture, butter and sugar
and PULSE 2-3 times. Add remaining
ingredients and PULSE mixture until
just combined. Do not over process.
Scrape down sides of bowl if necessary.
4. Divide mixture evenly between 8 holes
of the muffin tray and bake for about
25 minutes or until cooked when tested
with a wooden skewer. Remove from
oven and stand for 5 minutes before
turning out onto a wire rack. Serve warm.
Serve puddings with butterscotch sauce.
To make butterscotch sauce,
1. Combine all ingredients in a saucepan
and cook, stirring, over a low heat until
combined.
54
Lemon Tart
Serves 8
INGREDIENTS
Sweet Shortcrust pastry
1 ½ cups (225g) plain flour
1
⁄3 cup (55g) icing sugar mixture
125g butter
1- ½ tablespoons iced water
Lemon filling
3 lemons
5 x 60g eggs
1 cup (220g) caster sugar
200ml cream
METHOD
1. Insert Quad blade into processor bowl.
Add flour, icing sugar and butter. Place
lid on bowl. Process until well combined;
add water, ½ tablespoon at a time and
process until mixture forms a ball.
2. Remove pastry from bowl onto a clean
surface and shape into a flat disk. Cover
pastry and refrigerate for 30 minutes.
3. Grease a 24cm round loose-based flan
tin. Roll pastry, between two sheets
of baking paper, large enough to line
tin. Carefully lift pastry into tin and
press into sides; trim edges. Cover and
refrigerate for 30 minutes.
4. Preheat oven to 200°c. Place tin on oven
tray; line tin with baking paper then fill
with baking beans. Bake for 10 minutes
then remove beans and paper and cook
in oven for a further 10 minutes or until
pastry is lightly browned; remove from
oven and reduce heat to 160°c.
5. Remove rind from lemons; reserve.
Juice lemons. Combine rind, juice and
remaining filling ingredients and whisk
until well combined. Carefully pour
into pastry case and bake for about 35
minutes or until set. Cool completely
before serving.
RECIPES
Moist Carrot Cake with Cream
Cheese Frosting
Serves 10
INGREDIENTS
3 carrots
250g butter, softened
1 ½ cups (330g) caster sugar
3 x 60 eggs
¾ cup (180ml) buttermilk
2 cups (300ml) self-raising flour
2 teaspoons ground cinnamon
1 teaspoon bicarbonate soda
1 cup desiccated coconut
1 x 440g can crushed canned pineapple in juice,
well drained
1 cup chopped walnuts
Frosting
30g butter, softened
125g cream cheese, softened
½ teaspoon vanilla extract
1 ½ cups (240g) icing sugar, sifted
6. Allow cakes to cool in pan for 5 minutes
before transferring to a wire rack to
cool completely.
7. Meanwhile to make frosting: Place
butter, cheese and vanilla into the bowl
of the electric mixer. Beat on speed
7-8 for about 1-2 minutes or until well
combined.
8. Reduce speed to 3 and add sugar; once
added increase speed again until mixed
well.
9. Once cakes are cool spread half of
cream cheese frosting on one cake
then top with second cake and top with
remaining frosting.
To make the frosting:
1. Combine cream cheese, butter and
vanilla in a bowl of an electric mixer.
Beat on high speed until smooth; reduce
speed and gradually add the icing sugar;
beat until smooth. Spread over cooled
cake.
METHOD
1. Preheat oven to 180°c no fan (160°C
with fan). Grease and line base
and sides of 2 x 20cm cake tins with
baking paper.
2. Assemble the food processor using the
coarse shredding disc. Grate carrots and
remove from bowl; set aside.
3. Place butter, sugar, eggs and buttermilk
in the bowl and process until
well combined.
4. Add sifted flour, cinnamon, bi-carb,
coconut; pulse until just combined.
Pour mixture into a large bowl and
fold through 2 cups of shredded carrot,
pineapple and walnuts.
5. Spoon mixture into prepared tins and
bake for about 40 minutes or until
cooked when tested with a skewer.
55
RECIPES
Baked Raspberry Cheesecake
Serves 8-10
INGREDIENTS
250g packet plain sweet biscuits
125g unsalted butter, melted
300ml carton sour cream
1 cup (220g) caster sugar
1 tablespoon finely grated lemon rind
4 eggs
750g cream cheese, at room temperature, cut
into cubes
200g fresh or frozen raspberries
METHOD
1. Preheat oven to 160°C no fan. Line the
base of a 23cm (base measurement)
springform pan with non-stick baking
paper.
2. Place Quad blade into processor bowl;
add biscuits. Place lid on bowl. Process
until biscuits are finely crushed. Place
crumbs into a bowl, add melted butter
and mix well. Use a straight-sided glass
to spread and press the biscuit mixture
firmly over the base and sides of pan,
leaving 1cm at the top of the pan.
Refrigerate 10 minutes.
3. Meanwhile clean bowl and insert Quad
blade; sour cream, sugar, rind and eggs
into the processor bowl. Place lid on
bowl. Process until smooth. Add cream
cheese and process until smooth.
Do not overmix.
56
4. Pour the cream cheese mixture into
the base. Sprinkle raspberries over the
top. Place the pan on a baking tray and
bake for 1 ¼ -1 ½ hours or until just set
in the centre. Turn oven off. Leave the
cheesecake in oven, with the door ajar,
for 2 hours or until cooled completely
(this will prevent cheesecake from
cracking). Refrigerate until well chilled.
TIP
If using frozen raspberries, thaw on
paper towelling first
NOTES
57
NOTES
58
NOTES
59
Breville Customer Service Centre
Australian Customers
New Zealand Customers
Mail: PO Box 22
Botany NSW 2019
AUSTRALIA
Mail:
Phone: 1300 139 798
Phone: 0800 273 845
Fax:
Fax:
(02) 9384 9601
Email: Customer Service:
askus@breville.com.au
Private Bag 94411
Botany Manukau 2163
Auckland NEW ZEALAND
0800 288 513
Email: Customer Service:
askus@breville.com.au
www.breville.com.au
Breville is a registered trademark of Breville Pty. Ltd. A.B.N. 98 000 092 928.
Copyright Breville Pty. Ltd. 2012.
Due to continued product improvement, the products illustrated/photographed
in this brochure may vary slightly from the actual product.
BFP800 Issue - F12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising