Sharp | DK-KP82PH | Specifications | Sharp DK-KP82PH Specifications

MODEL
DK-KP82PH
SLIM MICRO SYSTEM
OPERATION MANUAL
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
iPad, iPhone, iPod, iPod classic, iPod nano, and
iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries.
Lightning is a trademark of Apple Inc.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed
to connect specifically to iPod, iPhone, or iPad respectively, and has been certified by the developer to meet
Apple performance standards. Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect
wireless performance.
Special Note
Supply of this product does not convey a license nor imply any right to distribute content created with this product in
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue-generating
streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution
systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact
discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for
such use is required. For details, please visit http://mp3licensing.com
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
Size 10 :
*TINSEA420AWZZFZ*|
TINSEA420AWZZ
DK-KP82PH_OM_EN_SCA.indd 1
13B R MW 1
2013-02-26 07:33:13
Special Notes
WARNINGS
● When the ON/STAND-BY button is set at STAND-BY
position, mains voltage is still present inside the unit.
When the ON/STAND-BY button is set at STAND-BY
position, the unit may be brought into operation by the
timer mode or remote control.
● This unit contains no user serviceable parts. Never
remove covers unless qualified to do so. This unit
contains dangerous voltages, always remove mains
plug from the socket before any service operation and
when not in use for a long period.
● To prevent fire or shock hazard, do not expose this
appliance to dripping or splashing. No objects filled
with liquids, such as vases, shall be placed on the
apparatus.
● Do not turn the volume on to full at switch on. Listen to
music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
Caution:
● This product is classified as a CLASS 1 LASER
PRODUCT.
● This product contains a low power laser device. To
ensure continued safety do not remove any cover or
attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel.
Accessories
The following accessories are included.
Remote control x 1
(RRMCGA272AWSA)
“AA” size battery
(UM/SUM-3, R6, HP-7 or similar) x 1
AM loop aerial x 1
Stand for iPad x 1
FM aerial x 1
Pattern Paper
DK-KP82PH_OM_EN_SCA.indd 1
2013-02-26 07:33:14
Precautions
● Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
● The AC power plug is used as a disconnect device
and shall always remain readily operable.
● Do not remove the outer cover, as this may result in
electric shock. Refer internal service to your local
SHARP service facility.
● The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
● No naked flame sources, such as lighted candles,
should be placed on the apparatus.
● Attention should be drawn to the environmental
aspects of battery disposal.
● This unit should only be used within the range of 5°C
- 35°C (41°F - 95°F).
Warning:
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage other than
that which is specified is dangerous and may result in a fire
or other type of accident causing damage. SHARP will not
be held responsible for any damage resulting from use of
this unit with a voltage other than that which is specified.
■ General
● Please ensure that the equipment is positioned in a
well ventilated area and ensure that there is at least
10 cm (4”) of free space along the sides and top of
the equipment.
10 cm (4”)
10 cm (4”)
● Use the unit on a firm, level surface free from vibration.
● Place the unit at least 30 cm (12”) away from any CRT
TV to avoid colour variations across the TV screen. If
the variations persist, move the unit further away from
the TV. LCD TV is not prone to such variation.
● Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home computers,
facsimiles, etc.) which generate electrical noise.
● Do not place anything on top of the unit.
● Do not expose the unit to moisture, to temperatures higher
than 40°C (104°F) or to extremely low temperatures.
● If your system does not work properly, disconnect
the AC power lead from the wall socket. Plug the AC
power lead back in, and then turn on your system.
● In case of an electrical storm, unplug the unit for safety.
■ Volume control
The sound level at a given volume setting depends on
speaker efficiency, location, and various other factors.
It is advisable to avoid exposure to high volume levels.
Do not turn the volume on to full at switch on. Listen to
music at moderate levels. Excessive sound pressure from
earphones and headphones can cause hearing loss.
Controls and indicators
1
23
5
6
7 8 910
12 14
13
11
4
■ Front panel
1.
2.
3.
4.
5.
6.
7.
8.
9. Tuning Up, CD/USB Track Up, iPod/iPhone Skip Up
10.Disc/USB/iPod/iPhone Play or Pause Button
11.Disc/USB Stop Button
12.FUNCTION Button
13.Disc Compartment Open/Close Button
14.On/Stand-by Button
Disc Compartment
Timer indicator
Remote sensor
Docking Station for iPod or iPhone
Headphone Terminal
USB Terminal
Volume buttons
Tuning Down, CD/USB Track Down, iPod/
iPhone Skip Down
DK-KP82PH_OM_EN_SCA.indd 2
2013-02-26 07:33:14
Controls and indicators
■ Remote control
1
2
1. Remote Control Transmitter
2. Open / Close Button
3. Numeric Buttons
4. X-Bass Button
5. Tuning Up / Down Button
6. Bass / Treble Button
7. Folder Button
8. Tuner Preset Up Button, iPod Cursor Up
9. Skip Down, Fast Reverse, Time Down Button
10. Clock/Timer Button
11. Tuner Preset Down Button, iPod Cursor Down
12. Demo Button
13. Dimmer Button
14. Display Button
15. RDS ASPM Button
16. RDS Display Button
17. RDS PTY Button
18. On/Stand-by Button
19. iPod Button
20. Tuner Button
21. CD/USB Button
22. Audio In Button
23. Mute Button
24. Volume Up/Down Button
25. Play Mode Button
26. Enter Button
27. Skip Up, Fast Forward, Time Up Button
28. Memory Button
29. Sleep Button
30. Clear Button
31. iPod Play/Pause Button
32. iPod Menu Button
33. CD Play/Pause Button
34. CD Stop Button
35. USB Play/Pause Button
36. USB Stop Button
18
19
20
3
21
22
23
4
5
24
6
7
8
9
25
26
27
10
11
12
13
28
29
30
31
32
33
34
35
36
14
15
16
17
■ Display
9
1 23
4 5
17
18 19 20 21
6 7 8
22
1. USB Indicator
2. iPod Indicators
3. CD Indicator
4. MP3 Indicator
5. WMA Indicator
6. RDM (Random) Indicator
7. MEM (Memory) Indicator
8. Repeat Indicator
9. Play/Pause Indicator
10. Tuning FM Indicator
11. FM Stereo Mode Indicator
12. Stereo Station Indicator
13. RDS Indicator
14. PTY Indicator
15. TP Indicator
16. TA Indicator
17. Muting Indicator
18. X-bass Indicator
19. Title Indicator
20. Artist Indicator
21. Folder Indicator
22. Album Indicator
23. File Indicator
24. Track Indicator
25. Daily Timer Indicator
26. Once Timer Indicator
27. Disc Indicator
28. Total Indicator
29. Sleep Indicator
15
10 1112 13 14 16
23 24 25 26
27 28 29
DK-KP82PH_OM_EN_SCA.indd 3
2013-02-26 07:33:14
Wall mount preparation
To mount the unit on the wall
4� Fasten the screws to the wall as shown below.
(Total screw is 2 pieces).
Caution:
● Be very careful to prevent the unit [2.45 kg (5.4 lbs.)]
from falling when mounting on the wall.
● Before mounting, check the wall strength. (Do not
put on the veneer plaster or whitewashed wall. The
unit may fall.) If unsure, consult a qualified service
technician.
● Mounting screws are not supplied. Use appropriate
ones.
● Check all wall mount screws for looseness.
● Select a good location. If not, accidents may occur or
the unit may get damaged.
● SHARP is not responsible for accidents resulting
from improper installation.
Wall surface
Wall surface
4.3 ~ 4.8 mm
Gap from the wall surface
5� Hang the unit onto the screws.
Wall surface
■ Driving screws
SHARP designed the unit so you may hang it on the wall.
Use proper screws (not supplied). See below for size and
type.
3.2 mm (1/8”)
5 mm
(3/16”)
9 mm (3/8”)
■ Falling prevention
Min. 22 mm (7/8”)
Safety wires (not supplied) are useful to prevent the unit
from falling off the wall.
■ Installing the unit
Screw eye (not supplied)
1� Fix the pattern paper to the wall in horizontal
position as below.
188509
mm
mm
Wall surface
44 mm
44 mm
29 mm
Pattern paper (supplied)
2� Make a hole on the wall following the screw point
marks on the pattern paper by using a drill.
Wall
32 mm (1-1/4”)
8-9 mm (3/8”)
Safety wires (not supplied)
Wall surface
Loop the safety wires (not supplied) into each hole as
shown and tie the safety wires to a hook (screw eye).
3� Fix a wall mount plug into the hole using a hammer,
Ø wire > 1.5 mm
until it is flush with the wall surface.
The diameter of wire/cable must be less than 1.5 mm.
32 mm (1-1/4”)
8-9 mm (3/8”)
Wall surface
DK-KP82PH_OM_EN_SCA.indd 4
2013-02-26 07:33:15
System connections
Make sure to unplug the AC power lead before making any connections.
FM aerial
External FM aerial for better
reception (not supplied)
AM loop
aerial
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
■ Aerial connection
■ AC power connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket
and position the FM aerial wire in the direction where the
strongest signal can be received.
External FM aerial:
Use an external FM aerial (75 ohms coaxial cable) for
better reception. When an external FM aerial is used,
disconnect the supplied FM aerial wire.
After checking all the connections have been made correctly,
plug the AC power lead of this unit into the wall socket.
Installing the AM loop aerial:
<Assembling>
<Attaching to the wall>
● The first time the unit is plugged in, the unit will enter
the demonstration mode.
● To cancel the demonstration mode, press the DEMO
button (remote control) during power stand-by mode.
The unit will enter the low power consumption mode.
● To return to the demonstration mode, press the DEMO
button again.
● If iPod or iPhone is docked, the unit will begin charging.
“Charge Mode” will be displayed. Demonstration
mode is invalid during charge mode.
Wall
Note:
Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.
■ Demonstration mode
Screws (not supplied)
Note:
Placing the aerial on the unit or near the AC power lead
may cause noise pickup. Place the aerial away from the
unit for better reception.
DK-KP82PH_OM_EN_SCA.indd 5
2013-02-26 07:33:15
Remote control
■ Battery installation
■ Test of the remote control
1� Open the battery cover.
2� Insert the supplied battery according to the terminal
Check the remote control after checking all the connections.
Point the remote control directly at the remote sensor on
the unit. The remote control can be used within the range
shown below:
Remote sensor
indicated in the battery compartment.
When inserting or removing the battery, push it towards
the (–) battery terminals.
3� Close the cover.
0.2 m - 6 m
(8” - 20’ )
Caution:
● Remove the battery if the unit will not be used for a
long period of time. This will prevent potential damage
due to battery leakage.
● Do not use rechargeable battery (nickel-cadmium
battery, etc.).
● Installing the battery incorrectly may cause the unit to
malfunction.
● Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine, fire
or the like.
Notes concerning use:
● Replace the battery if the operating distance is reduced
or if the operation becomes erratic. Purchase an “AA”
size battery (UM/SUM-3, R6, HP-7 or similar).
● Periodically clean the transmitter on the remote control
and the sensor on the unit with a soft cloth.
● Exposing the sensor on the unit to strong light may
interfere with operation. Change the lighting or the
direction of the unit if this occurs.
● Keep the remote control away from moisture, heat,
shock, and vibrations.
DK-KP82PH_OM_EN_SCA.indd 6
2013-02-26 07:33:16
General control
■ Auto power off function
The main unit will enter the stand-by mode (when iPad,
iPod or iPhone is not connected) after 15 minutes of
inactivity during:
iPod:
Not docked.
Audio In: No detection of input signal.
CD:
In the stop mode or no disc.
USB:
In the stop mode or no media.
Note:
However, if iPod or iPhone is docked, the unit will begin
charging.
“Charge Mode” will be displayed.
■ Muting
The volume is muted temporarily when pressing the MUTE
button on the remote control. Press again to restore the
volume.
■ X-Bass control
When the power is first turned on, the unit will enter the
extra bass mode which emphasises the bass frequencies,
and “X-BASS” indicator will appear. To cancel the extra
bass mode, press the X-BASS button on the remote
control.
■ To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power standby mode.
■ Bass control
1� Press the BASS/TREBLE button to select “Bass”.
2� Within 5 seconds, press the VOLUME (+ or –) button to
■ Display brightness control
adjust the bass. “X-BASS” indicator will disappear.
To dim the display brightness, press the DIMMER button
on the remote control.
Dimmer 1
(Display is dim).
Dimmer 2
(Display gets dimmer).
- 5 ↔ - 4........↔ + 4 ↔ + 5
■ Treble control
Dimmer Off (Display is bright).
1� Press the BASS/TREBLE button to select “Treble”.
2� Within 5 seconds, press the VOLUME (+ or –) button to
■ Volume auto fade-in
adjust the treble. “X-BASS” indicator will disappear.
If you turn off and on the main unit with the volume set to
27 or higher, the volume starts at 12 and fades in to the
last set level.
- 5 ↔ - 4........↔ + 4 ↔ + 5
■ Volume control
■ Function
Press VOLUME (+ or -) on the main unit or VOL +/- on the
remote control to increase or decrease the volume.
When the FUNCTION button on main unit is pressed, the
current function will change to different mode. Press the
FUNCTION button repeatedly to select desired function.
■ Direct key power on function
When you press any of the following buttons, the unit
turns on.
● iPod, CD/USB, AUDIO IN, TUNER on the remote
control: Selected function is activated.
● / button on the main unit: The unit turns on and
playback of the last function will start (CD, TUNER,
USB, iPod, AUDIO IN)
CD
FM STEREO
FM MONO
AM
Audio In
iPod
USB
Note:
The backup function will protect the memorised function
mode for a few hours should there be a power failure or
the AC power lead becomes disconnected.
DK-KP82PH_OM_EN_SCA.indd 7
2013-02-26 07:33:17
Listening to the iPod, iPhone or iPad
Made for:
● iPhone 5
● iPhone 4S
● iPhone 4
● iPhone 3GS
● iPhone 3G
● iPhone
● iPad (4th generation)
● iPad mini
● iPad (3rd generation)
● iPad 2
● iPad
● iPod touch (5th generation)
● iPod touch (4th generation)
● iPod touch (3rd generation)
● iPod touch (2nd generation)
● iPod touch (1st generation)
● iPod classic
● iPod nano (7th generation)
● iPod nano (6th generation)
● iPod nano (5th generation)
● iPod nano (4th generation)
● iPod nano (3rd generation)
● iPod nano (2nd generation)
■ iPod, iPhone and iPad connection (USB
only)
1� Insert the connector to the iPod, iPhone or iPad.
iPad
Connector
2� Place the iPad to the stand for iPad.
iPad
Stand for iPad
Caution:
Please update your iPod, iPhone and iPad unit to the
latest software version before using it. Please visit Apple’s
homepage to download the latest version for your iPod,
iPhone and iPad.
3� Connect the iPod, iPhone or iPad to the unit via USB
connector.
Notes:
● Charging terminal for iPod, iPhone and iPad:
CONDITION
USB function
Other function
(iPod / CD /
Tuner / Audio In)
Stand-by
DEMO
DOCK
NO
YES
USB TERMINAL
YES
NO
YES
YES
NO
NO
USB
● The message “This accessory is not made to work
with iPhone” or similar, may appear on the iPhone
screen when:
- battery is low.
- the iPhone is not properly docked (eg. slanting).
● If this occurs, remove and re-dock the iPhone.
● You may also experience brief audio interference
during incoming calls.
■ iPod, iPhone or iPad playback via USB
terminal
1� Press the ON/STAND-BY button to turn the power
on.
2� Press the CD/USB button on the remote control or
FUNCTION button repeatedly on the main unit to
select USB function.
3� Connect iPod, iPhone or iPad to the unit. “USB/iPod”
will appear.
File name
4� Press the / (USB / ) button to start playback.
Note:
Stop button ( ) is invalid during iPod, iPhone or iPad
playback
DK-KP82PH_OM_EN_SCA.indd 8
2013-02-26 07:33:17
Listening to the iPod, iPhone or iPad (continued)
■ iPhone playback
■ iPod or iPhone playback
1� Press the ON/STAND-BY button to turn the power
● Sound will only switch from iPhone to the main
unit after authentication process is completed in
approximately 10 seconds.
● Incoming calls will pause the playback.
● Once the calls are answered, the conversation can
only be heard through the built-in iPhone speaker. Turn
on the iPhone speaker or undock the iPhone to start
conversation.
on.
2� Press the iPod button on the remote control or
FUNCTION button repeatedly on the main unit to
select iPod function.
3� Insert iPod or iPhone unit into the dock of main unit.
“Dock Ok” will appear.
4� Press the / (iPod / ) button to start playback.
■ iPod and iPhone connection (Dock only)
Caution:
Unplug all accessories from the iPod or iPhone before
inserting it into the dock.
Note:
Docking station is for iPod touch (5th generation), iPod
nano (7th generation) and iPhone 5 connection only. Other
Apple products (iPod, iPhone and iPad) can be connected
via USB terminal.
1� Open the docking station for iPod and iPhone by
pulling up the cover.
■ Navigating the iPod, iPhone or iPad
menus
2� Dock your iPod or iPhone into the unit.
1� Press the MENU button to view the menu on iPod,
iPhone (bottom)
iPhone or iPad unit. Press it again to go back to
previous menu.
2� Use the PRESET ( or ) button to select an item on
the menu and then press ENTER button.
iPhone
Lightning connector
Note:
When navigating the iPod, iPhone or iPad menu with
remote control, do not operate any of the buttons on
the iPod or iPhone unit. The volume level is adjusted by
pressing the VOLUME (+ or -) on the main unit or VOL +/on the remote control. Adjusting the volume on the iPod,
iPhone or iPad units give no effect.
Dock for iPhone
iPod, iPhone and iPad operations:
The operations described below depend on the generation
of iPod, iPhone and iPad you are using.
images on page 9
System on operation:
When the main unit is powered on, the iPod, iPhone or
iPad units will automatically power on when docked or
connected in the unit.
System off (stand-by operation):
When the main unit is turned to stand-by mode, the docked
iPod, iPhone or connected iPad unit will automatically turn
to stand-by mode.
DK-KP82PH_OM_EN_SCA.indd 9
2013-02-26 07:33:18
Listening to a CD or MP3/WMA disc
Listening to the iPod, iPhone or iPad
(continued)
■ To disconnect iPod, iPhone or iPad
Simply remove the iPod or iPhone from the docking
station or iPad connector from USB terminal. It is safe to
do so even during playback.
Caution:
● Stop button ( ) at main unit is invalid during iPod
function.
■ Various iPod, iPhone and iPad functions
Function
Main
unit
Dock/
USB
Remote control
Dock
Play
Pause
Track
up/
down
Fast
forward/
reverse
Repeat
Shuffle
Menu
Enter
Cursor
Up/
Down
____
____
____
____
Operation
USB
Press in the pause
mode.
Press in the
playback mode.
Press in the
playback or pause
mode.
If you press the
button in the pause
mode, press the
/ button to start
the desired track.
Press and hold
down in the
playback mode.
Release the
button to resume
playback.
Press to toggle
repeat mode.
Press and hold
to toggle shuffle
mode.
Press to view the
iPod menu during
iPod function.
Press to confirm
the selection.
This system can play back a standard CD, CD-R/RW in
the CD format and CD-R/RW with MP3 or WMA files, but
cannot record on them. Some audio CD-R and CD-RW
discs may not be playable due to the state of the disc or
the device that was used for recording.
■ Disc playback
1� Press the ON/STAND-BY button to turn the power on.
2� Press the CD/USB button on the remote control or
FUNCTION button repeatedly on the main unit to select
CD function.
3� Press the OPEN/CLOSE button to open the disc
compartment.
4� Place the disc in the disc compartment, label side front.
5� Press the OPEN/CLOSE button to close the disc
compartment.
6� Press the / (CD / ) button to start playback. After the
Press to select the
iPod menu.
last track is played, the unit will stop automatically.
10
DK-KP82PH_OM_EN_SCA.indd 10
2013-02-26 07:33:19
Listening to a CD or MP3/WMA disc
(continued)
Advanced CD or MP3/WMA disc
playback
Caution:
● Do not place two discs in the disc compartment.
● Do not play discs of special shapes (heart, octagon,
etc). It may cause malfunctions.
● Do not push the disc compartment while it is moving.
● If the power fails while the compartment is open, wait
until the power is restored.
● If TV or radio interference occurs during CD operation,
move the unit away from the TV or radio.
● Be sure to place 8 cm (3”) disc in the middle of the
disc compartment.
● Due to the structure of the disc information, it takes
longer to read an MP3/WMA disc than a normal CD
(approximately 20 to 90 seconds).
■ Direct track search
By using the Numeric buttons, the desired tracks on the
current disc can be played.
Use the Numeric buttons on the remote control to select
the desired track while playing the selected disc.
● The Numeric buttons allow you to select up to number 9.
● When selecting number 10 or higher, use the “10+” button.
A. For example, to choose 13
1� Press the “10+” button once.
2� Press the “1” button.
3� Press the “3” button.
Selected track
number
B. For example, to choose 130
1� Press the “10+” button twice.
2� Press the “1” button.
3� Press the “3” button.
4� Press the “0” button.
Notes:
● A track number higher than the number of tracks on
the disc cannot be selected.
● During random play, direct search is not possible.
To stop playback:
● Press the (CD ) button.
Notes for CD or MP3/WMA disc:
● Rewritable multi-session discs with unfinished writing,
can still be played.
■ Various disc functions
Function
Main
unit
Remote
control
Operation
Play
Press in the stop mode.
Pause
Press in the playback
mode. Press the
/ button to resume
playback from the
paused point.
Press in the playback
mode.
Stop
Track
up/down
Fast
forward/
reverse
■ Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the PLAY MODE button repeatedly until “Repeat
One” appears. Press the / (CD / ) button.
To repeat all tracks:
Press the PLAY MODE button repeatedly until “Repeat
All” appears. Press the / (CD / ) button.
To repeat desired tracks:
Perform steps 1 - 5 in “Programmed play” section on
page 12 and then press the PLAY MODE button repeatedly
until “Repeat All” appears.
To repeat one folder:
While in Folder mode on (MP3/WMA), press PLAY MODE
button repeatedly until “Repeat Folder” appears. Press the
/ (CD / ) button.
To cancel repeat play:
Press the PLAY MODE button repeatedly until “Normal”
appears and “ ” disappears.
Press in the playback or
stop mode.
If you press the button
in the stop mode, press
the / button to start the
desired track.
Press and hold down in
the playback mode.
Release the button to
resume playback.
Caution:
After performing repeat play, be sure to press the (CD )
button. Otherwise, the disc will play continuously.
11
DK-KP82PH_OM_EN_SCA.indd 11
2013-02-26 07:33:20
Advanced CD or MP3/WMA disc playback (continued)
■ Random play
■ Programmed play (MP3/WMA)
1� While in the stop mode, press the MEMORY button to
The tracks on the disc can be played in random order
automatically.
enter the programming save mode.
or ) button on the remote
control to select the desired folder.
2� Press the PRESET (
To random play all tracks:
Press and hold the PLAY MODE button on the remote
control until “Random” appears. Press the / (CD / )
button.
To cancel random play:
Press the PLAY MODE button again. “RDM” indicator will
disappear.
Then press the
or
button on the remote control
to select the desired tracks.
3� Press the MEMORY button to save the folder and
Notes:
● If you press the
button during random play, you
can move to the track selected next by the random
operation. On the other hand, the
button does not
allow you to move to the previous track. The beginning
of the track being played will be located.
● In random play, the unit will select and play tracks
automatically. (You cannot select the order of the tracks.)
track number.
4� Repeat steps 2 – 3 for other folder/tracks. Up to 32
tracks can be programmed.
5� Press the / (CD / ) button to start playback.
To cancel the programmed play mode:
During programmed stop mode, press the
(CD )
button. The display will show “Memory Clear” and all the
programmed contents will be cleared.
■ Programmed play (CD)
Adding tracks to the programme:
If a programme has been previously stored, the “MEM”
indicator will be displayed. Press the MEMORY button.
Then follow steps 2 - 3 to add tracks.
You can choose up to 32 selections for playback in the
order you like.
1� While in the stop mode, press the MEMORY button on
the remote control to enter the programming save mode.
or
button on the
remote control to select the desired track.
Notes:
● When the disc compartment is opened, the programme
is automatically cancelled.
● If you press the ON/STAND-BY button to enter the
stand-by mode or change the function from CD to
another, the programmed selections will be cleared.
● During the programme operation, random play is not
possible.
2� Press the Numeric buttons or
Selected track number
3� Press the MEMORY button to save the track number.
4� Repeat steps 2 - 3 for other tracks. Up to 32 tracks can
be programmed. If you want to check the programmed
tracks, press the MEMORY button repeatedly. If you
make a mistake, the programmed tracks can be
cleared by pressing the CLEAR button.
5� Press the / (CD / ) button to start playback.
12
DK-KP82PH_OM_EN_SCA.indd 12
2013-02-26 07:33:20
Advanced CD or MP3/WMA disc
playback (continued)
Listening to USB mass storage
device/MP3 player
Notes:
1. Remove the USB terminal
cover before use. Keep it
away from children as it may
be swallowed.
2. Cover the USB terminal if it is
not used for a long period of
time to prevent dust or rust.
■ Procedure to playback MP3/WMA disc
with folder mode on
To play back CD-R/RW.
1� Press the CD/USB button on the remote control, and
load an MP3/WMA disc. Press the FOLDER button
and disc info will be displayed.
MP3 indicator
WMA indicator
Total number of folder
TOTAL indicator
Total number of files
2� Press the PRESET ( or ) button to select desired
playback folder. (Folder mode on)
FOLDER
indicator
FOLDER number
First track number in
the folder
3� Select desired file to be played back by pressing the
or
button.
4� Press the / (CD / ) button. Playback will start and
file name will be displayed.
● Title, Artist and Album name are displayed if they
are recorded on the disc.
● In case of playback with the folder mode on, press
the PRESET ( or ) button, and the folder can
be selected even though it is in playback/pause
mode. It will continue playback/pause mode in the
1st track of the selected folder.
● Display content can be changed by pressing the
DISPLAY button.
File name display
Counter display
Album display
Note:
This product is not compatible with MTP and AAC file
systems from USB mass storage device or MP3 player.
■ To play back USB/MP3 player with folder
mode off
Folder display
1� Press the CD/USB button on the remote control or
FUNCTION button repeatedly on main unit to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
2� Select desired file to be played back by pressing the
or
button.
3� Press the / (USB / ) button. Playback will start and
the file name will be displayed.
● Title, Artist and Album name are displayed if they
are recorded in the USB memory device.
● Display content can be changed by pressing the
DISPLAY button.
Note:
To pause playback:
Press the / (USB / ) button.
Title display
Artist display
Note:
If “Not Support” is displayed, it means “Copyright
protected WMA file” or “Not supported playback file” is
selected.
13
DK-KP82PH_OM_EN_SCA.indd 13
2013-02-26 07:33:21
Advanced USB playback
Listening to USB mass storage
device/MP3 player (continued)
The following functions are the same as CD operations:
Page
Direct track search........................................................11
Repeat play....................................................................11
Random play................................................................. 12
Programmed play (MP3/WMA).................................... 12
■ To play back USB/MP3 player with folder
mode on
1� Press the CD/USB button on the remote control or
FUNCTION button repeatedly on main unit to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
2� Press the FOLDER button, and press the PRESET (
or ) button to select desired playback folder. To start
playback with folder mode on, go to step 4. To change
the playback folder, press the PRESET ( or ) button
to select another folder.
3� Select desired file to be played back by pressing the
or
button.
4� Press the / (USB / ) button. Playback will start and
the file name will be displayed.
● Title, Artist and Album name are displayed if they
are recorded in the USB memory device.
● Display content can be changed by pressing the
DISPLAY button.
Note:
If USB memory device is not connected, “USB No Media”
will be shown on the display.
Notes:
● This unit only supports “MPEG-1 Audio Layer-3”
format. (Sampling Frequency is 32, 44.1, 48kHz)
● Playback order for MP3 files may differ depending on
the writing software used during file download.
● Bitrate which is supported by MP3 is 32~320 kbps,
WMA is 64~160 kbps.
● For MP3/WMA files, please put “.MP3” “.WMA” extension.
Files cannot be played back if there is no MP3/WMA
extension.
● Playlists are not supported on this unit.
● This unit can display Folder Name or File Name up to
32 characters.
● Maximum total number of MP3/WMA files is 65025.
● Total number of folders read is 999 including folder
with non-playable file. However, the display shows
only folder with MP3 files.
● The display playback time may not be displayed
correctly when playing back a variable bitrate file.
● The ID3TAG information supported are TITLE, ARTIST
and ALBUM only. Title name, artist name and album
name can be displayed by pressing the DISPLAY
button during file playback or pause mode.
● WMA meta tag also supports title, artist and album
name which are recorded in WMA files. Copyright
protected WMA files cannot be played back.
■ To remove USB memory device
1� Press the (USB ) button to stop playback.
2� Disconnect USB memory device from the USB terminal.
Notes:
● SHARP will not be held liable for the loss of data while
the USB memory device is connected to the audio
system.
● Files compressed in MP3 and/or WMA format can be
played back when connected to the USB terminal.
● This USB memory’s format supports FAT 16 or FAT 32.
● SHARP cannot guarantee that all USB memory
devices will work on this audio system.
● USB cable is not recommended for use in this audio
system to connect to USB memory device. Use of the
USB cable will affect the performance of this audio
system. iPod, iPhone and iPad is not prone to this
condition.
● This USB memory cannot be operated via USB hub.
● The USB terminal in this unit is not intended for a PC
connection but is used for music streaming with a
USB memory device.
● External HDD-storage cannot be played back via USB
terminal.
● If the data inside the USB memory is large, it may take
longer time for the data to be read.
● This product can play WMA and MP3 files. It will
automatically detect the file type being played. If
unplayable file is played on this product, “Not Support”
is indicated and the file will be automatically skipped.
This will take a few seconds. If abnormal indications
appear on the display due to the unspecified file, turn
off the unit and then turn it on again.
● This product relates to USB mass storage devices and
MP3 players. It may however face some irregularities
due to various unforeseen reasons from some devices.
Should this happen, turn off the unit and then turn it
on again.
● During CD function, MP3 player will not be charging.
14
DK-KP82PH_OM_EN_SCA.indd 14
2013-02-26 07:33:21
Listening to the radio
■ Memorising a station
You can store 40 AM and FM stations in memory and
recall them at the push of a button. (Preset tuning)
1� Perform steps 2 - 3 in “Tuning”.
2� Press the MEMORY button.
3� Within 30 seconds, press the PRESET ( or ) button
to select the preset channel number. Store the stations
in memory, in order, starting with preset channel 1.
4� Within 30 seconds, press the MEMORY button to
store that station in memory. If the “MEMORY” and
preset number indicators disappear before the station
is memorised, repeat the operation from step 2.
5� Repeat steps 1 - 4 to set other stations, or to change
a preset station. When a new station is stored in the
memory, the station previously memorised for that
preset channel number will be erased.
Note:
The backup function protects the memorised stations for
a few hours should there be a power failure or the AC
power lead becomes disconnected.
■ Tuning
1� Press the ON/STAND-BY button to turn the power on.
2� Press the FUNCTION button on the main unit or
TUNER button on the remote control repeatedly to
select FM Stereo, FM Mono or AM.
3� Press the TUNING ( or ) button on main unit or
remote control to tune in to the desired station.
● Manual tuning:
Press the TUNING ( or ) button repeatedly to tune
in to the desired station.
● Auto tuning:
When the TUNING ( or ) button is pressed for more
than 0.5 seconds, scanning will start automatically and the
tuner will stop at the first receivable broadcast station.
■ To recall a memorised station
Press the PRESET ( or ) button for less than 0.5
seconds to select the desired station.
■ To scan the preset stations
The stations saved in the memory can be scanned
automatically. (Preset memory scan)
1� Press the PRESET ( or ) button for more than
0.5 seconds. The preset number will flash and the
programmed stations will be tuned in sequentially, for
5 seconds each.
2� Press the PRESET ( or ) button again when the
desired station is located.
Notes:
● When radio interference occurs, auto scan tuning may
stop automatically at that point.
● Auto scan tuning will skip weak signal stations.
● To stop the auto tuning, press the TUNING ( or )
button again.
● When an RDS (Radio Data System) station is tuned
in, the frequency will be displayed first, and then the
RDS indicator will light up. Finally, the station name will
appear.
● Full auto tuning can be achieved for RDS stations
“ASPM”, see page 16.
■ To erase entire preset memory
1� Press the FUNCTION button (main unit) repeatedly
or TUNER button (remote control) to select Tuner
function.
2� In Tuner function, press the CLEAR button until “Tuner
Clear” appears.
To receive an FM stereo transmission:
● Press the TUNER button to select stereo mode and
“ST” indicator will be displayed. “ ” and “ ” will
appear when an FM broadcast is in stereo.
● If the FM reception is weak, press the TUNER button
to extinguish the “ST” indicator. The reception changes
to monaural, and the sound becomes clearer.
15
DK-KP82PH_OM_EN_SCA.indd 15
2013-02-26 07:33:22
Using the Radio Data System (RDS)
RDS is a broadcasting service which a growing
number of FM stations provide. These FM stations
send additional signals along with their regular
programme signals. They send their station names,
and information about the type of programme such as
sport, music, etc.
When tuned to an RDS station, “RDS” and the station
name will be displayed.
“TP” (Traffic Programme) will appear on the display when
the received broadcast carries traffic information, and
“TA” (Traffic Announcement) will appear while a traffic
information is on air.
“PTYI” (Dynamic PTY Indicator) will appear while the
Dynamic PTY station is received.
■ Using the Auto Station Programme
Memory (ASPM)
While in the ASPM operation mode, the tuner will
automatically search for new RDS stations. Up to 40
stations can be stored.
If you have already stored some stations in memory, the
number of new stations you can store will be less.
1� Press the TUNER button on the remote control or
FUNCTION button repeatedly on the main unit to
select TUNER function.
2� Press and hold down the RDS ASPM button on the
remote control.
1� After “ASPM” has flashed for about 4 seconds,
scanning will start (87.50 - 108.00 MHz).
2� When an RDS station is found, “RDS” will appear
for a short time and the station will be stored in
memory.
You can control the RDS by using the buttons on the
remote control only.
3� After scanning, the number of stations stored in
memory will be displayed for 4 seconds, and then
“END” will appear for 4 seconds.
■ Information provided by RDS
Each time the RDS DISPLAY button is pressed, the
display will switch as follows:
Station name (PS)
To stop the ASPM operation before it is complete:
Press the RDS ASPM button while it is scanning for stations.
The stations which are already stored in memory will be
kept there.
Notes:
● If the same station is broadcasting on different
frequencies, the strongest frequency will be stored in
memory.
● Any station which has the same frequency as the one
stored in memory will not be stored.
● If 40 stations have already been stored in memory, the
scan will be aborted. If you want to redo the ASPM
operation, erase the preset memory.
● If no station has been stored in memory, “END” will
appear for a short while.
● If the RDS signals are very weak, station names may
not be stored in memory.
● The same station name can be stored in different
channels.
● In a certain area or during certain time periods, the
station names may temporarily be different.
Programme type (PTY)
Frequency
Radio text (RT)
When tuning in to a station other than an RDS station or to
an RDS station which sends weak signal, the display will
change in the following order:
No PS
No PTY
FM 98.80 MHz
No RT
■ Notes for RDS operation
If any of the following events occur, it does not mean
that the unit is faulty:
● “PS”, “No PS” and a station name appear alternately,
and the unit does not operate properly.
● If a particular station is not broadcasting properly
or a station is conducting tests, the RDS reception
function may not work properly.
● When you receive an RDS station whose signal is too
weak, information like the station name may not be
displayed.
● “No PS”, “No PTY” or “No RT” will flash for about 5
seconds, and then the frequency will be displayed.
16
DK-KP82PH_OM_EN_SCA.indd 16
2013-02-26 07:33:22
Using the Radio Data System (RDS) (continued)
Notes for radio text:
● The first 14 characters of the radio text will appear for
4 seconds and then they will scroll across the display.
● If you tune in to an RDS station which is not
broadcasting any radio text, “No RT” will be displayed
when you switch to the radio text position.
● While radio text data is received or when the text
contents change, “RT” will be displayed.
Descriptions of the PTY (Programme Type) codes, TP
(Traffic Programme) and TA (Traffic Announcement)
You can search for and receive the following PTY, TP and
TA signals.
NEWS
AFFAIRS
■ To recall stations in memory
To specify programmed types and select stations
(PTY search):
You can search a station by specifying the programme
type (news, sports, traffic programme, etc.) from the
stations in memory.
1� Press the TUNER button on the remote control or
FUNCTION button repeatedly on the main unit to
select TUNER function.
2� Press the RDS PTY button on the remote control.
INFO
SPORT
EDUCATE
DRAMA
CULTURE
“SELECT” and “PTY TI” will appear alternately for about
6 seconds.
3� Within 6 seconds, press the TUNING ( or ) button to
select the programme type.
SCIENCE
VARIED
Each time the button is pressed, the programme type will
appear.
4� While the selected programme type is flashing (within
6 seconds), press the RDS PTY button again.
POP M
ROCK M
After the selected programme type has been lit for
2 seconds, “SEARCH” will appear, and the search
operation will start.
Notes:
● If the display has stopped flashing, start again from
step 2. If the unit finds a desired programme type,
the corresponding channel number will lit for about 8
seconds, and then the station name will remain lit.
● If you want to listen to the same programme type of
another station, press the RDS PTY button while the
channel number or station name is flashing. The unit
will look for the next station.
● If no station can be found, “Not Found” will appear for
a short while.
If you select the traffic programme:
If you select the traffic programme (TP) in step 3, “TP”
will appear.
(This does not mean that you can listen to the traffic
information at that time.)
When the traffic information is broadcast, “TA” will
appear.
EASY M
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
Short accounts of facts, events and
publicly expressed views, reportage and
actuality.
Topical programme expanding or
enlarging upon the news, generally in
different presentation style or concept,
including debate, or analysis.
Programmes whose purpose is to impart
advice in the widest sense.
Programme concerned with any aspect
of sport.
Programme intended primarily to educate, of
which the formal element is fundamental.
All radio plays and serials.
Programmes concerned with any aspect
of national or regional culture, including
language, theatre, etc.
Programmes about the natural sciences
and technology.
Used
for
mainly
speech-based
programmes
usually
of
lightentertainment nature, not covered by
other categories. Examples include:
quizzes, panel games, personality
interviews.
Commercial music, which would
generally be considered to be of current
popular appeal, often featuring in
current or recent record sales charts.
Contemporary modern music, usually
written and performed by young
musicians.
Current contemporary music considered
to be “easy-listening”, as opposed to
Pop, Rock or Classical, or one of the
specialised music styles, Jazz, Folk or
Country. Music in this category is often
but not always, vocal, and usually of
short duration.
Classical music for general, rather than
specialist appreciation. Examples of
music in this category are instrumental
music, and vocal or choral works.
Performances of major orchestral works,
symphonies, chamber music, etc., and
including Grand Opera.
Musical styles not fitting into any of
the other categories. Particularly used
for specialist music of which Rhythm &
Blues and Reggae are examples.
Weather reports and forecasts and
meteorological information.
Stock Market reports, commerce,
trading, etc.
For programmes targeted at a young
audience, primarily for entertainment
and interest, rather than where the
objective is to educate.
17
DK-KP82PH_OM_EN_SCA.indd 17
2013-02-26 07:33:23
Setting the clock (Remote control only)
Using the Radio Data System (RDS)
(continued)
SOCIAL
Programmes about people and things
that influence them individually or in
groups. Includes: sociology, history,
geography, psychology and society.
RELIGION
Any aspect of beliefs and faiths,
involving a God or Gods, the nature of
existence and ethics.
PHONE IN
Involving members of the public
expressing their views either by phone
or at a public forum.
TRAVEL
Features and programmes concerned
with travel to near and far destinations,
package tours and travel ideas
and opportunities. Not for use for
announcements
about
problems,
delays,
or
roadworks
affecting
immediate travel where TP/TA should
be used.
LEISURE
Programmes
concerned
with
recreational activities in which the
listener might participate. Examples
include, Gardening, Fishing, Antique
collecting, Cooking, Food & Wine, etc.
JAZZ
Polyphonic,
syncopated
music
characterised by improvisation.
COUNTRY
Songs which originate from, or continue
the musical tradition of the American
Southern States. Characterised by a
straightforward melody and narrative
story line.
NATION M
Current Popular Music of the Nation or
Region in that country’s language, as
opposed to International “Pop” which
is usually US or UK inspired and in
English.
OLDIES
Music from the so-called “golden age”
of popular music.
FOLK M
Music which has its roots in the musical
culture of a particular nation, usually
played on acoustic instruments. The
narrative or story may be based on
historical events or people.
DOCUMENT Programme concerned with factual
matters, presented in an investigative
style.
TEST
Broadcast when testing emergency
broadcast equipment or receivers.
ALARM
Emergency announcement made under
exceptional circumstances to give
warning of events causing danger of a
general nature.
NONE
No programme type (receive only).
TP
Broadcasts
which
carry
traffic
announcements.
TA
Traffic announcements are being
broadcast.
In this example, the clock is set for the 24-hour (0:00)
display.
1� Press the ON/STAND-BY button to turn the power
on.
2� Press the CLOCK/TIMER button.
3� Within 10 seconds, press the ENTER button. To adjust
the day, press the
or
button and then press the
ENTER button.
4� Press the or button to select 24-hour or 12-hour
display and then press the ENTER button.
The 24-hour display will appear.
(0:00 - 23:59)
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
5� To adjust the hour, press the
or
button and then
press the ENTER button. Press the
or
button
once to advance the time by 1 hour. Hold it down to
advance continuously.
6� To adjust the minutes, press the
or
button and
then press the ENTER button. Press the
or
button once to advance the time by 1 minute. Hold it
down to advance continuously.
To confirm the time display:
Press the CLOCK/TIMER button. The time display will
appear for about 5 seconds.
Note:
When power supply is restored after unit is plugged in
again or after a power failure time display will be blinking.
Reset the clock.
To readjust the clock:
Perform “Setting the clock” from step 1.
18
DK-KP82PH_OM_EN_SCA.indd 18
2013-02-26 07:33:23
Timer and sleep operation (Remote control only)
Timer playback:
The unit turns on and plays the desired source (CD,
TUNER, USB, iPod, AUDIO IN) at a preset time.
This unit has 2 types of timer: ONCE TIMER and DAILY
TIMER.
Once timer (“ ” indicator):
Once timer play works for one time only at a preset time.
Daily timer (“DAILY” indicator):
Daily timer play works at the same preset time every day
that we set. For example, set the timer as a wake-up call
every morning.
Using the once timer and daily timer in combination:
For example, use the once timer to listen a radio
programme, and use the daily timer to wake up.
12�When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the
preset volume. The timer indicator will blink during timer
playback. When the timer end time is reached, the system
will enter the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer operates at the same time every selected
day. It will continue until the daily timer setting is
cancelled. Cancel the daily timer when it is not in use.
Notes:
● When performing timer playback using another unit
connected to the USB terminal or AUDIO IN socket,
select “USB” or “AUDIO IN” in step 5.
● This unit will turn on or enter the power stand-by
mode automatically. However, the connected unit will
not turn on or off. To stop the timer playback, follow
step “Cancelling the timer setting” of this page.
1� Set the daily timer.
2� Set the once timer.
1 minute or more
Daily timer
Start
Once timer
Stop
Start
Stop
■ Timer playback
Before setting timer:
● Check that the clock is set to the correct time (refer
to page 18). If it is not set, you cannot use the timer
function.
● For timer playback: Plug in USB or load discs or dock
iPod to be played.
Checking the timer setting:
1� Turn the power on and press and hold down the
CLOCK/TIMER button.
2� Within 10 seconds, press the or button to select
“Once” or “Daily”, and press the ENTER button.
3� Within 10 seconds, press the or button to select
“Timer Call”, and press the ENTER button.
1� Press the ON/STAND-BY button to turn the power on.
2� Press and hold the CLOCK/TIMER button.
3� Within 10 seconds, press the or button to select
Cancelling the timer setting:
1� Turn the power on and press and hold down the
CLOCK/TIMER button.
2� Within 10 seconds, press the or button to select
“Once” or “Daily”, and press the ENTER button.
3� Within 10 seconds, press the or button to select
“Timer Off”, and press the ENTER button. Timer will
be cancelled (the setting will not be cancelled).
“Once” or “Daily”, and press the ENTER button.
or
button to select
“Timer Set”, and press the ENTER button.
5� To select the timer playback source (CD, TUNER, USB,
iPod, AUDIO IN), press the
or
button. Press the
ENTER button.
When you select the tuner, select a station by pressing
the
or
button, and then press the ENTER button.
If a station has not been programmed, “No Preset” will
be displayed and timer setting will be cancelled.
6� To adjust the day, press the
or
button and then
press the ENTER button.
7� Press the ENTER button to adjust the hour. Press the
or
button and then press the ENTER button.
8� To adjust the minutes, press the
or
button and
then press the ENTER button.
9� Set the time to finish as in steps 7 and 8 above.
10�Adjust the volume using the VOLUME (+ or -) on the main
unit or VOL +/- on the remote control, and then press the
ENTER button. Do not turn the volume up too high.
11�Press the ON/STAND-BY button to enter the power
stand-by mode. The “TIMER” indicator lights up and
the unit is ready for timer playback.
4� Within 10 seconds, press the
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To
reuse the same setting, perform the following operations.
1� Turn the power on and press and hold down the
CLOCK/TIMER button.
2� Within 10 seconds, press the or button to select
“Once” or “Daily”, and press the ENTER button.
3� Within 10 seconds, press the or button to select
“Timer On” , and press the ENTER button.
4� Press the ON/STAND-BY button to enter the power
stand-by mode.
19
DK-KP82PH_OM_EN_SCA.indd 19
2013-02-26 07:33:23
Timer and sleep operation (Remote
control only) (continued)
■ Listening to the playback sounds of
portable audio player, etc.
1� Use a connection lead to connect the portable audio
player etc. to the AUDIO IN socket. When using video
equipment, connect the audio output to this unit and
the video output to a television.
2� Press the ON/STAND-BY button to turn the power
on.
3� Press the AUDIO IN button on the remote control or
FUNCTION button repeatedly on main unit to select
AUDIO IN function.
4� Play the connected equipment. If volume level of the
connected device is too high, sound distortion may
occur. Should this happen, lower the volume of the
connected device. If volume level is too low, increase
the volume of the connected device.
■ Sleep operation
The radio, compact disc, iPod, USB, Audio In can all be
turned off automatically.
1� Play back the desired sound source.
2� Press the SLEEP button.
3� Within 5 seconds, press the Numeric buttons to set
the time. (1 minute ~ 99 minutes)
4� “SLEEP” will appear.
5� The unit will enter the power stand-by mode
automatically after the preset time has elapsed. The
volume will be turned down 1 minute before the sleep
operation finishes.
To confirm the remaining sleep time:
While “SLEEP” is indicated, press the SLEEP button.
To cancel the sleep operation:
Press the ON/STAND-BY button while “SLEEP” is
indicated. To cancel the sleep operation without setting
the unit to the stand-by mode, proceed as follows.
1� While “SLEEP” is indicated, press the SLEEP button.
2� Within 5 seconds, press the “0” button twice until
“SLEEP 00” appears.
Note:
To prevent noise interference, place the unit away from
the television.
■ Headphones
● Do not turn the volume on to full at switch on and
listen to music at moderate levels. Excessive sound
pressure from earphones and headphones can cause
hearing loss.
● Be sure your headphone has a 3.5 mm (1/8”) diameter
plug and impedance between 16 and 50 ohms. The
recommended impedance is 32 ohms.
● Before plugging in or unplugging the headphone,
reduce the volume.
● Plugging in the headphone disconnects the speakers
automatically. Adjust the volume using the VOLUME (+ or
-) on the main unit or VOL +/- on the remote control.
■ To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD in the next morning.
1� Set the sleep time (see above, steps 1 - 5).
2� While the sleep timer is set, set the timer playback
(steps 2 - 9, page 19).
Sleep timer
setting
Timer playback
setting
1-99 minutes
Sleep operation will
automatically stop
Troubleshooting chart
End time
Many potential problems can be resolved by the owner
without calling a service technician.
If something is wrong with this product, check the
following before calling your authorised SHARP dealer or
service centre.
Desired time
Timer playback start
time
■ General
Enhancing your system
Symptom
● The clock is not set to
the correct time.
Possible cause
● Did a power failure occur?
● Reset the clock. (Refer
page 18)
● When a button is
● Set the unit to the power
pressed, the unit does
stand-by mode and then
not respond.
turn it back on.
● If the unit still
malfunctions, reset it.
(Refer page 21)
● No sound is heard.
● Is the volume level set to
“Min”?
● Are the headphones
connected?
The connection lead is not included. Purchase a commercially
available lead as shown below.
Portable
audio
player, etc.
Audio cable
(not supplied)
20
DK-KP82PH_OM_EN_SCA.indd 20
2013-02-26 07:33:24
Troubleshooting chart (continued)
■ CD player
Symptom
● Playback does not
start.
● Playback stops in
the middle or is not
performed properly.
● Playback sounds are
skipped, or stopped
in the middle of a
track.
■ USB
Possible cause
● Is the disc loaded face
down?
● Does the disc satisfy the
standards?
● Is the disc distorted or
scratched?
● Is the unit located near
excessive vibrations?
● Is the disc very dirty?
● Has condensation formed
inside the unit?
Symptom
● Device cannot be
detected.
● Playback does not
start.
● Wrong time display.
● Wrong file name
display.
■ Remote control
Symptom
● The remote control
does not operate.
Possible cause
● Is the AC power lead of the
unit plugged in?
● Is the battery polarity
correct?
● Is the battery dead?
● Is the distance or angle
incorrect?
● Does the remote control
sensor receive strong light?
■ Condensation
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation
inside the cabinet (CD pickup, etc.) or on the transmitter
on the remote control. Condensation can cause the unit
to malfunction. If this happens, leave the power on with no
disc in the unit until normal playback is possible (about 1
hour). Wipe off any condensation on the transmitter with a
soft cloth before operating the unit.
■ Tuner
■ If problem occurs
Symptom
● The radio makes
unusual noises
continuously.
Possible cause
● Is the unit placed near the
TV or computer?
● Is the FM aerial or
AM loop aerial placed
properly? Move the aerial
away from the AC power
lead if it is located nearby.
When this product is subjected to strong external
interference (mechanical shock, excessive static
electricity, abnormal supply voltage due to lightning, etc.)
or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1� Set the unit to the stand-by mode and turn the power
on again.
2� If the unit is not restored in the previous operation,
unplug and plug in the unit again, and then turn the
power on.
Note:
If neither operation above restores the unit, clear all the
memory by resetting it.
■ iPod, iPhone or iPad
Symptom
● No sound is
produced.
● iPod, iPhone or iPad
will not charge.
● “This accessory is
not made to work
with iPhone” or “This
accessory is not
supported by iPhone”
appears on iPhone
screen.
Possible cause
● Is there any MP3/WMA file
available?
● Is the device properly
connected?
● Is it an MTP device?
● Does the device contain
AAC file only?
● Is it a copyright protected
WMA file?
● Is it a false MP3 file?
● Is Variable Bitrate file being
played back?
● Is the File Name written
in Chinese or Japanese
characters?
Possible cause
● The iPod, iPhone or iPad is
not playing.
● The iPod, iPhone or iPad is
not properly connected to
the unit.
● Is the AC power lead of the
unit plugged in?
● The iPod, iPhone or iPad
is not making full contact
with the connector.
● Using iPod (3rd
generation).
● The iPod or iPhone is not
supported. Refer to page 8
for compatible models.
● The iPhone battery is low.
Please charge the iPhone.
● iPhone is not properly
docked.
■ Factory reset, clearing all memory
1� Press FUNCTION button (main unit) repeatedly or
AUDIO IN button (remote control) to enter Audio In
mode.
2� Press
button (main unit) once.
3� Press and hold button (main unit) until “RESET” appears.
Caution:
This operation will erase all data stored in memory
including clock, timer settings and tuner preset.
■ Before transporting the unit
Remove the iPod, iPhone, iPad, USB memory device and
disc from the unit. Then, set the unit to the power stand-by
mode. Carrying the unit with iPod, iPhone, iPad or USB
memory device left connected or discs left inside might
damage the unit.
21
DK-KP82PH_OM_EN_SCA.indd 21
2013-02-26 07:33:24
Troubleshooting chart (continued)
Dimensions
■ Care of compact discs
Weight
( * ) This power consumption value is obtained when the
demonstration mode is cancelled in the power stand-by
mode. Refer to page 5 to cancel the demonstration mode.
Compact discs are fairly resistant to damage, however
mistracking can occur due to an accumulation of dirt on
the disc surface. Follow the guidelines below for maximum
enjoyment from your CD collection and player.
● Do not write on either side of the disc, particularly the
non-label side from which signals are read. Do not
mark this surface.
● Keep your discs away from direct sunlight, heat, and
excessive moisture.
● Always hold the CDs by the edges. Fingerprints, dirt,
or water on the CDs can cause noise or mistracking.
If a CD is dirty or does not play properly, clean it with
a soft, dry cloth, wiping straight out from the centre,
along the radius.
NO
Width: 475 mm (18 - 11/16”)
Height: 191 mm (7 - 1/2”)
Depth: 83 mm (3 - 1/4”)
2.45 kg (5.4 lbs.)
■ Amplifier
Output power
MPO: 50 W (25 W + 25 W)
(10% T.H.D.)
RMS: 50 W (25 W + 25 W)
(10% T.H.D.)
RMS: 40 W (20 W + 20 W)
(1% T.H.D.)
Output terminals Headphones: 16 ohms
(recommended: 32 ohms)
Input terminals
Audio In (audio signal):
500 mV/47 k ohms
YES
Correct
■ CD player
Maintenance
Type
■ Cleaning the cabinet
Signal readout
Periodically wipe the cabinet with a soft cloth and a
diluted soap solution, then with a dry cloth.
Caution:
● Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet.
● Do not apply oil to the inside of the unit. It may cause
malfunctions.
D/A converter
Frequency
response
Dynamic range
USB host
interface
Poor performance during CD playback (skipping or jumping)
can be caused by a dirty or contaminated CD laser pick up
lens. If this happens then the use of a commercially available
CD lens cleaning disc may restore normal operation.
Contact your supplier or local CD software dealer to obtain
CD lens cleaning discs. Ensure all included instructions/
documentation are carefully followed.
Support file
Bitrate support
Other
Specifications
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification
changes for product improvement without prior notice.
The performance specification figures indicated are
nominal values of production units. There may be some
deviations from these values in individual units.
File system
support
■ General
Speaker
maximum input
power
Speaker rated
input power
90 dB (1 kHz)
■ USB (MP3 / WMA)
■ Cleaning the CD pickup lens
Power source
Power
consumption
Speaker
Single disc multi-play compact disc
player
Non-contact, 3-beam
semiconductor laser pickup
Multi bit D/A converter
20 - 20,000 Hz
AC 220 - 240 V ~ 50/60 Hz
Power on: 24 W
Power stand-by: 0.4 W (*)
1-way speaker system
Speaker: 10 cm (4”) - 6 ohms - Full Range
50 W/channel
Complies with USB 1.1 (Full
Speed)/2.0 Mass Storage Class.
Support Bulk only and CBI
protocol.
MPEG 1 Layer 3
WMA (Non DRM)
MP3 (32 ~ 320 kbps)
WMA (64 ~ 160 kbps)
Maximum total number of MP3/
WMA files is 65025.
Maximum total number of folders is
999 INCLUSIVE of root directory.
The ID3TAG information supported
are TITLE, ARTIST and ALBUM only.
Supports ID3TAG version 1 and
version 2.
Support USB devices with
Microsoft Windows/DOS/FAT
12/FAT 16/ FAT 32.
2 kbyte block length for sector.
■ Tuner
Frequency range FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
Preset
40 (FM and AM station)
25 W/channel
22
DK-KP82PH_OM_EN_SCA.indd 22
2013-02-26 07:33:25
For Australia and New Zealand customers
SHARP
FORLOCATION
LOCATIONENQUIRIES
ENQUIRIESWITHIN
WITHIN
FOR
AUSTRALIA
AUSTRALIA
REGARDINGYOUR
YOURLOCAL
LOCAL
REGARDING
SHARPAPPROVED
APPROVEDSERVICE
SERVICECENTRE
CENTRE
SHARP
VISITOUR
OURWEBSITE
WEBSITEAT
AT
VISIT
www.sharp.net.au
www.sharp.net.au
OR CALL
CALL SHARP
SHARP CUSTOMER
CUSTOMER CARE
CARE
OR
1300 135
135 022
1300
(LOCALCALL
CALLCOSTS
COST6APPLY
APPLYWITHIN
WITHINAUSTRALIA)
AUSTRALIA)
(LOCAL
SHARPCORPORATION
CORPORATIONOF
OFAUSTRALIA
AUSTRALIAPTY
PTYLTD
LTD
SHARP
SHARP
FOR
FOR LOCATION
LOCATION ENQUIRIES
ENQUIRIES WITHIN
WITHIN
NEW ZEALAND
REGARDING YOUR
YOUR LOCAL
LOCAL
REGARDING
SHARPAPPROVED
APPROVEDSERVICE
SERVICECENTRE
CENTRE
SHARP
VISITOUR
OURWEBSITE
WEBSITEAT
AT
VISIT
www.sharp.net.nz
www.sharp.net.nz
CONTACTYOUR
YOURSELLING
SELLINGDEALER/RETAILER
DEALER/RETAILER
CONTACT
OR
CALL
OR CALL
SHARP
SHARP CUSTOMER
CUSTOMER SERVICES
SERVICES
TELEPHONE:
TELEPHONE: 09
09 573
573 0111
0111
FACSIMILE:
09
573
0113
FACSIMILE: 09 573 0113
SHARP CORPORATION OF NEW ZEALAND LIMITED
SHARP CORPORATION OF NEW ZEALAND LIMITED
SPform019(AUGUST 2011)
SPform019(AUGUST 2011)
23
DK-KP82PH_OM_EN_SCA.indd 23
2013-02-26 07:33:25
For Australia and New Zealand customers
WARRANTY
Consumer Electronic Products
Congratulations on Your Purchase!
This Sharp product is warranted against faults in material and manufacture for the
period as stated in the table below.
If service is required during the warranty period, please contact your nearest Sharp
Approved Service Centre. These repairs would be carried out at no charge to the
owner, subject to the conditions specified herein.
This warranty does not extend to defects or injuries caused by or resulting from causes
not attributable to faulty parts or the manufacture of the product, including but not
limited to, defect or injury caused by or resulting from misuse, abuse, neglect, lack of
maintenance, accidental damage, improper voltage, liquid spillage, vermin infestation,
software, or any alterations made to the product which are not authorised by Sharp.
Please retain your sales documentation, as this should be produced to validate a
warranty claim. This warranty is in addition to and in no way limits, varies or excludes
any implied rights and remedies under any relevant legislation in the country of sale.
This warranty does not cover transportation to and from the Sharp Approved Service
Centre. Goods presented for repair may be replaced by refurbished goods of the same
type rather than being repaired. Refurbished parts may be used to repair the goods.
The repair of your goods may result in the loss of user generated data, please ensure
that you have saved this data elsewhere prior to repair.
Australian customers: Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled to a replacement or refund
for a major failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced
if the goods fail to be of acceptable quality and the failure does not amount
to a major failure. The criteria of a major failure is defined in the Australian
Consumer Law. Should you require any assistance with a major failure please
contact Sharp Customer Care.
WARRANTY PERIODS
12 months (excluding lamps and air filters)
12 months
12 months
12 months
24 months
12 months
60 months
12 months
12 months
12 months
24 months
S
A HA
A US RP
1 BN TRA CO
Hu Hun 40 LIA RP
nt tin 003 P OR
in g
gw wo 03 TY. ATI
oo od 9 4 LIM ON
0
d
O
NS Driv 5 ITE F
D
W e
S
21
N HAR
48
59 EW P
Pe Hu ZEA COR
nr go L PO
os J AN R
e, oh D AT
Au ns LI IO
ck ton MIT N
lan D E OF
d riv D
e
Home Theatre Projector
Audio/Home Theatre
Microwave Oven
Steam Oven
Refrigerator
DVD/Blu-ray
Air Conditioner
Portable Air Conditioner
LCD Television
Air Purifier
Vacuum Cleaner
SPform 040 (JUNE 2012)
IMPORTANT NOTICE: This warranty applies only to products sold in Australia & New Zealand
24
DK-KP82PH_OM_EN_SCA.indd 24
2013-02-26 07:33:26
For U.K. and Ireland customers
NOTES FOR USERS IN THE U.K. AND IRELAND
The mains lead of this product is tted with a non-rewireable
(moulded) plug incorporating a10A fuse. Should the fuse need to
be replaced, a BSI or ASTA approved BS 1362 fuse marked or
and of the same rating as above, which is also indicated on
the pin face of the plug must be used.
Always re t the fuse cover after replacing the fuse. Never use
the plug without the fuse cover tted.
In the unlikely event of the socket outlet in your home not being
compatible with the plug supplied, cut-off the mains plug and t
an appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and the cut-off
plug destroyed immediately and disposed of in a safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet as a serious electric shock may
occur.
To t an appropriate plug to the mains lead, follow the instructions below:
Ensure that neither the brown nor the blue wire is connected to
the earth terminal in your three pin plug.
Before replacing the plug cover, make sure that:
d plug contains a fuse, its value is the same as
If the new
that removed from the cut-off plug.
The cord grip is clamped over the sheath of the mains lead
and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
SERVICE INFORMATION
In the unlikely event of your equipment requiring repair, please
contact the dealer or supplier from whom it was purchased. Where
this is not possible, please visit our web-site www.sharp.co.uk/
customersupport.aspx
Customers without internet access may telephone 0845
880 0512 during of ce hours (or (01) 676 0648 if telephoning
from lreland).
Please note; all calls will be charged at local rate.
IMPORTANT:
The wires in the mains lead are coloured in accordance with the
following code:
Blue
: Neutral
Brown : Live
Certain replacement parts and accessories may be obtained from
our main parts distributor.
As the colours of the wires in the mains lead of this product may
not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the plug
terminal which is marked N or coloured black.
The wire which is coloured brown must be connected to the
plug terminal which is marked L or coloured red.
In the unlikely event of this equipment requiring repair during the
guarantee period, you will need to provide proof of the date of
purchase to the repairing company.
Please keep your invoice or receipt, which is supplied at the
time of purchase.
WILLOW VALE ELECTRONICS LTD.
0121 766 5414
25
DK-KP82PH_OM_EN_SCA.indd 25
2013-02-26 07:33:26
For U.K. and Ireland customers
Information on Proper Disposal
A.Information on Disposal for Users (private households)
1. In the European Union
Attention: If you want to dispose of this equipment, please do not use the ordinary dustbin!
Used electrical and electronic equipment must be treated separately and in accordance with
legislation that requires proper treatment, recovery and recycling of used electrical and electronic
equipment.
Following the implementation by member states, private households within the EU states may
return their used electrical and electronic equipment to designated collection facilities free of
Attention: Your
charge*.
In some countries* your local retailer may also take back your old product free of charge if you
product is marked
purchase a similar new one.
with this symbol. It
*) Please contact your local authority for further details.
means that used
If your used electrical or electronic equipment has batteries or accumulators, please dispose of
electrical and
these separately beforehand according to local requirements.
electronic products
By disposing of this product correctly you will help ensure that the waste undergoes the necessary
should not be mixed treatment, recovery and recycling and thus prevent potential negative effects on the environment
with general
and human health which could otherwise arise due to inappropriate waste handling.
2. In other Countries outside the EU
household waste.
There is a separate If you wish to discard this product, please contact your local authorities and ask for the correct
collection system for method of disposal.
For Switzerland: Used electrical or electronic equipment can be returned free of charge to the
these products.
dealer, even if you don't purchase a new product. Further collection facilities are listed on the
homepage of www.swico.ch or www.sens.ch.
B.Information on Disposal for Business Users
1. In the European Union
If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the take-back of the product. You
might be charged for the costs arising from take-back and recycling. Small products (and small
amounts) might be taken back by your local collection facilities.
For Spain: Please contact the established collection system or your local authority for take-back of
your used products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact your local authorities and ask for the correct
method of disposal.
Information on Battery Disposal
The battery supplied with this product contains traces of Lead.
For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household
waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in
accordance with legislation. Please contact your local authority for details on the collection and recycling
schemes.
For Switzerland: The used battery is to be returned to the selling point.
For other non-EU countries: Please contact your local authority for correct method of disposal of the used
battery.
26
DK-KP82PH_OM_EN_SCA.indd 26
2013-02-26 07:33:26
TERMS OF GUARANTEE
Sharp Electronics (UK) Ltd. (“Sharp”) guarantees to provide for the repair, or at its option the replacement, of this product subject to the conditions listed below:1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does
not cover faults or damage caused by accident, misuse, fair wear and tear, neglect, tampering with
the product, or repair other than by a Service Facility appointed by Sharp.
2. As this product is intended for private domestic use only, the guarantee will not apply if the product
is used in the course of a business, trade or profession.
3. T
Service Facility within one year from the date this product was purchased. Proof of purchase must
be provided.
4. The guarantee does not cover carriage costs, audio tapes, compact discs or batteries.
5. In the unlikely event of this product requiring repair, please contact the supplier from whom it was
purchased. Where this is not possible, please contact the Sharp Customer Information Centre on
the telephone number given below.
6. No person has any authority to vary the terms or conditions of this guarantee.
7. This guarantee is offered as an additional
rights in any way.
to your statutory rights, and does not affect these
If you have any dif
operating this product, or would like information on other Sharp products,
please telephone the Sharp Customer Information Centre on the number given below.
Sharp Customer Information Centre - Telephone 0845 880 0512
(or (01) 676 0648 if telephoning from Ireland)
Customer support website address - www.sharp.co.uk/customersupport.aspx
27
DK-KP82PH_OM_EN_SCA.indd 27
2013-02-26 07:33:26
Download PDF

advertising