HDMI 2 Ports Splitter Amplifier by Cat5 x1
HDMI Over Cat5 Extender plus x2 Splitter
Model # 50- 15005
Table of Contents
1.0 Introduction ……………………………………………………..2
2.0 Specifications …………………………………….………..……2
3.0 Package Contents ………………………………………….…..3
4.0 Panel Descriptions …………………………………….…….…4
5.0 Connection and Operation..................................................4
１
Distributed Exclusively by
MCM Electronics www.mcmelectronics.com
HDMI 2 Ports Splitter Amplifier by Cat5 x1
HDMI 2 Ports Splitter Amplified by
Cat5 x1
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
1.0 INTRODUCTION
This HDMI Splitter is an HDMI splitter with two RJ45 outputs. It distributes the input of the HDMI signal into the two identical outputs simultaneously. Two HDMI
Extender Receivers by Cat5 x1 receive the distributed signal from the splitter and transmit to displays individually.
Each receiver works with the splitter as a full functional module. Only by the most inexpensive UTP cable with cross stand inside the full functional module extend the HDTV display up to 50 meters for 1080p.
This HDMI Splitter offers solutions for HDTV retail and show site, HDTV, STB,
DVD and Projector factory, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
1.1 FEATURES
This HDMI Splitter has many features that enable it to perform in a superior manner. Among those features you will find: l Easy to Use: Install in seconds, no need of setting. l One pair as a full functional module, l One piece of CAT-5e/6 cable can substitute HDMI cable to achieve long distance transmission. l Follows the standard of IEEE-568B. l Transmission distance can be up to 50 meters for 1080p using UTP cable with cross stand inside. l Supports HDMI1.2a. l Supports highest video resolution 1080p. l Supports 165MHz/1.65Gbps per channel (4.95Gbps all channel) bandwidth. l Supports 8bit per channel (24bit all channel) deep color. l Supports uncompressed audio such as LPCM
2.0 SPECIFICATIONS
Signal Inputs/Output
Input DDC Signal
Maximum Single Link Range
5 volts p-p (TTL)
1920X1080p
２
HDMI 2 Ports Splitter Amplifier by Cat5 x1
Output Video
Operating Frequency
Video Amplifier Bandwidth
Vertical Frequency Range
Resolutions(HDTV)
Interlaced(50&60Hz)
Progressive(50&60Hz)
Mechanical
Size of HDMI 4 Ports Splitter Amplifier
(L-W-H)
Weight of HDMI 4 Ports Splitter
Amplifier (Net)
Size of Receiver (L-W-H)
Weight of Receiver (Net)
Warranty
Limited Warranty
Environmental
Operating Temperature
Operating Humidity
Storage Temperature
HDMI 1.2a
1.65Gpbs/165MHz
50/60Hz
480i,576i,1080i
480p,576p,720p,1080p
100X102X25MM
285G
100×65×25.5MM
385G
1 Year Parts and Labor
0℃ to +70℃
10% to 85 % RH (no condensation)
-10℃ to +80℃
Storage Humidity
Power Requirement
Power Supply for HDMI 4 Ports Splitter
Amplifier
Power Supply for Receiver
Regulatory Approvals
Converter Unit
Power Supply
5% to 90 % RH (no condensation)
5V DC@ 2A,10W
5V DC@ 2A, 5W
FCC,CE,UL
UL,CE,FCC
Accessories Adapter
AC Power Adapter US standard, UK standard and so on
User Manual English Version
Note: Specifications are subject to change without notice.
3.0 PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:
1) HDMI 2 Ports Splitter Amplifier
2) User
’s Manual.
3) Two Receivers
4) Three pieces of 5V DC@ 2A Power Supply.
３
HDMI 2 Ports Splitter Amplifier by Cat5 x1
4.0 PANEL DESCRIPTIONS
HDMI 2 Port Splitter Amplifier by Cat5 x1
Receiver
HDMI Extender by CAT5
X
1
Receiver
5.0 CONNECTION AND OPERATION
1) Connect the single HDMI source (such as HD-DVD, PS3, STB ) to the main
HDMI input using a piece of HDMI cable.
2) Connect each piece of CAT-5e/6 cable to both of the output of the HDMI 2
Ports Splitter Amplifier and input of the Receiver.
3) Connect outputs of Receivers to displays ( such as HD-LCD、HD-DLP)
4) Plug the 5V@ 2A power supply into the HDMI 2 Ports Splitter Amplifier and the 5V@2A power suppliers to each Receiver individually.
４
Attention: Insert / Extract cable gently.
5.1 CONNECTION DIAGRAM
HDMI 2 Ports Splitter Amplifier by Cat5 x1
５
P/N3009
