BT 2-Line User guide

Add to my manuals
31 Pages

advertisement

BT 2-Line User guide | Manualzz
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
ST O
U T RK ER RE LL .
M E O L O I N .
U RIB W AL EF W IO LE
T C B 5 T B
O
C
* Y B S N E ’ S C E 2 0 2 M A YA
R I
A
R
U
S U D E RV S E O R P
I SE R NF IS
O
Y V
E
O Y V S I EE
PR LA ON HI Y F
P C T L
IS
R
D U R AY T E
L
YO I S P A R
D QU
A
This product is intended for connection
to analogue public switched telephone
networks and private switchboards in the
United Kingdom.
Converse 2025
2 Line Corded Telephone with
Caller Display*
User
Guide
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
Please open this page for an ‘At a glance’
guide to your Converse 2025
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
At a glance
Line indicators
One-touch memory buttons
Each button holds a stored name and
number.
Up/Down
Scroll through entries in the caller display
list or directory.
Converse 2025
Dial/Enter
Press to dial numbers from the
Calls List or enter changes to the
telephone’s settings.
Program
▲
Delete
Deletes numbers on the display.
Deletes directory, one-touch and
caller display entries.
Used to access some BT Select
Services and when using your phone
with a switchboard.
M2
Delete
R
Redial
Edit
PQ
TU
WX
8
9
YZ
7
1
Incoming call
– flashes rapidly
No line connection
– light comes on then
goes off.
New calls in the Calls list – flashes slowly when
the line is not in use
Lets you note the Directory locations in
which you have stored a name and number.
Hold
Ringer volume
Switch between Hi, Lo and Off.
Hi
Lo Off
Line sockets
Data uses the 2nd line if connecting to a PC,
Fax machine or other device.
Line 2
Conference
ld
Ho
Data
Lets you hold a three-way call.
ce
en
er
Handsfree indicator
Comes on when in handsfree or headset
mode.
Handsfree
0
Lets you use handsfree or headset mode.
Headset socket
Lets you connect a headset (available
separately).
Memo card
Press to put a caller on hold.
ndsfree
Ha
Volume
Adjust the volume for the
handsfree speaker, handset and headset.
2
ne
Li
Co
nf
S
Dire
6
– flashes slowly
O
5
V
Volume
4
RS
Opens the directory for storing
and dialling numbers.
3
MN
L
Directory
2
DE
JK
GH
I
Lets you store numbers in the
directory and one-touch buttons.
ry
cto
1
AB
1
ne
Li
F
Store
re
to
C
Inserts a Pause when storing a number
in the directory or a one-touch button.
Line on hold
Display shows
NO CONNECTION.
When answering a call, press the line next
to the rapidly flashing indicator.
Redial/Pause
Press to redial the last number called.
– flashes occasionally
Edit
Lets you select which line you want to use.
Dial/Enter
Line in use by another
phone
Line1/Line 2
M3
Prog
– indicator is on.
Press to open the telephone settings menu.
Lets you change directory and one-touch
memory entries.
▲
M1
Recall
In use
Inductive coupler
Improves sound quality for people
with hearing aids.
Keypad
2
Line 1
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
Incoming call on Line 1.
Screen display
The standby display shows the time and date on
the top line.
The bottom line shows the number of new calls
received (if any).
3:27 PM
1/18
3:27 PM
1/18
RING : LINE 1
When using your Converse 2025 to make a call,
the display shows the line you are using and the
mode: handset, handsfree (speaker) or headset.
09 NEW CALLS
3:27 PM
1/18
The call on Line 1 has been put on hold.
3:27 PM
1/18
HOLD : LINE 1
LINE 2 : SPEAKER
The bottom line will scroll between messages if
more than one is valid.
Line 2 is in use by another phone.
3:27 PM
1/18
BUSY : LINE 2
3
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
In this guide
Note
Please note that there is a detailed Index at the back of this guide, see page 27.
At a glance
1
Key features
5
Introduction
6
Unpacking your Converse 2025
For your records
Safety information
Setting up
4
6
6
7
8
Using your Converse 2025
10
Settings menu
Making and receiving calls
Call timer
Last number redial
Secrecy/on hold
Handsfree
Headset
Volume
Conference call
Data port
Using the one-touch memory
Using the directory
10
11
11
12
12
12
12
13
13
14
14
16
Caller Display
18
Using Caller Display
Calls list
New calls indicator
18
18
18
General information
21
Guarantee
Technical information
Switchboard compatibility
21
22
22
Help
23
Wall mounting
24
Index
27
Hints and tips boxes
In this user guide, we have included helpful
tips and useful notes. They are shown in a
white box like this.
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
Key features
2 line capacity
Lets you make the efficient use of
two lines. Set to automatic line
selection or select the line you want to use.
One-touch buttons
Handsfree, headset or handset
operation
Handsfree puts calls on the
loudspeaker, leaving you free to take notes and
for others in the room to take part in the
conversation. A headset also keeps hands free
with the added convenience of privacy.
32 name and number directory
phone
numbers
Store up to 32 of your most frequently
dialled names and numbers in the
directory. It's easy to display, dial, change or add
to numbers in the directory.
HO'S CAL
W
G
LIN
SEE
Store and dial your three most
important numbers at a single touch.
Caller Display
Let’s you know who’s calling before
answering the telephone. Details of
up to 64 calls received are kept in the Calls list.
Data port
Lets you connect a PC, fax machine
or internet device to Line 2.
Conference call
Use both lines connected to your
Converse 2025 to hold a three-way
conversation.
Desk or wall mountable
Use the plinth to set your Converse
2025 at a comfortable angle on your
desk or as a wall-mounting bracket.
5
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
Introduction
Your Converse 2025 has been designed for ease of use and made to the
high standards set by BT.
Please read the instructions carefully before use
and keep this User Guide for future reference.
Unpacking your Converse 2025
For your records
Date of purchase:
If anything is missing, please contact your place
of purchase immediately.
Place of purchase:
▲
▲
M2
GH
I
JK
5
TU
8
2
ne
Li
S
Serial number
MN
6
ld
Ho
WX
YZ
RS
V
7
1
ne
Li
DE
3
O
4
PQ
Volume
AB
L
Dire
Edit
2
F
ry
cto
Prog
Redial
C
Converse 2025 base
M3
Dial/Enter
R
1
9
Co
n
M1
Delete
re
to
r
fe
ce
en
(on the underside of the base unit):
e
ndsfre
Ha
INTRODUCTION
0
Handset
Handset coiled cord
2 telephone line cords
Screws and wall plugs
Desk/wall mounting plinth
4 x AA batteries
Screwdriver
6
Purchase price:
For guarantee purposes, proof of purchase is
required, so please keep your receipt.
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
Safety information
General
Do not open the Converse 2025. This could
expose you to high voltages or other risks.
Contact the Helpline for all repairs.
Never dispose of batteries in a fire. There is
a serious risk of explosion and/or the release
of highly toxic chemicals.
Use only AA alkaline batteries. When replacing
batteries, all batteries should be replaced at
the same time.
Cleaning
Simply clean your Converse 2025 with a damp
(not wet) cloth, or an antistatic wipe.
INTRODUCTION
Never use household polish as this may
damage the product.
Never use a dry cloth as this may cause
static shock.
Environmental
Do not expose to direct sunlight.
We recommend that you do not place the
product on antique/veneered wood to avoid
damage.
Do not stand your product on carpets or
other surfaces which generate fibres, or place
it in locations preventing free flow of air over
its surfaces.
Do not submerge any part of your product
in water and do not use it in damp or humid
conditions, such as in bathrooms.
Do not expose your product to fire, explosive
or other hazardous conditions.
7
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
Setting up
Plan the location
Insert batteries as shown.
Situate your Converse 2025 close enough to the
phone sockets so that the line cord will reach.
Your Converse 2025 can be wall-mounted. See
‘Wall-mounting’, on page 24.
Close the cover and replace the screw.
SETTING UP
1 Install the batteries
The memory and the display on your Converse
2025 is powered by 4 x AA alkaline batteries.
Make sure the desk/wall mounting plinth is not
attached to the base of the phone.
Make sure the phone is not plugged into the
phone socket.
Use a screwdriver to remove the screw on the
battery compartment cover.
Use the tip of the screwdriver to push the
battery compartment cover’s catch then lever
up to open the cover.
8
Note
When your batteries are close to becoming
completely flat,
will flash in the upper
left corner of the display. If you do not replace
batteries they will become totally discharged.
Whilst batteries are in good condition the
Directory and One-touch memories will be
retained. Battery replacement should be
completed within 2 minutes or the memory
contents may be lost.
If no batteries are installed, the
will
only appear when the phone is off the hook as
this activates the display.
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
2 Connect the handset
Plug one end of the coiled cord into the handset
and the other end into the socket on the left
side of the base
4 Desk mounting
If preferred, you can attach the desk/wall mount
to the base of your phone to raise it up at a
convenient angle.
Place the handset on the hook.
SETTING UP
3 Plug your Converse 2025 into the
telephone sockets
To wall mount, see page 24.
Helpline
If you have any difficulties setting up or using
your Converse 2025, please call the BT Converse
2025 Helpline on 0845 050 1331.
Your Converse 2025 is now ready for use.
Note
If you have a preferred outgoing number this
should be connected to line 1 as this is the default
line that your Converse 2025 will attempt to
connect to.
9
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
Using your Converse 2025
Settings menu
Note
When the headset is ON handsfree is disabled.
The Converse 2025's menu lets you select the
way you want to use your phone.
Set contrast of the display
USING YOUR PHONE
Dial/Enter
Delete
Prog
At any time when in the settings menu
you can press the Dial/Enter button to
move to the next setting.
Press Delete to go back to the
previous setting or Prog to move to the
next setting.
If you do not press any button, the
display will return to standby after 20
seconds.
Prog
▲
▲
When in the settings menu:
Dial/Enter
Prog
Open the menu
▲
▲
▲
Press the Prog button while the phone
is in standby.
The display shows HEADSET OFF/ON.
Dial/Enter
Dial/Enter
▲
Prog
10
Press the Dial/Enter or Prog button.
The display shows SET TIME/DATE and
the hour setting will flash. The default
setting is 12.00am 1/01. (If you subscribe
to a Caller Display service, the time
and date will be set automatically when
your Converse 2025 receives its first
call, press the Prog button if you want
to skip setting the time and date.)
Press the Up and Down buttons to
increase or decrease the setting and
press the Dial/Enter button to move
between the settings.
You can also press 1 to enter AM, 2 to
enter PM.
Switch headset on/off
Press the Up/Down buttons to switch
between On and Off.
Press the Up/Down buttons to increase/
decrease the setting between 1-5.
Set time and date
Dial/Enter
To select the settings
Prog
Press the Dial/Enter or Prog button.
The display shows SET CONTRAST. The
current setting will flash.
Press the Dial/Enter or Prog button to
exit the settings menu.
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
Making and receiving calls
To make a call
ndsfree
Ha
Using auto-line selection:
Note
In some instances the LCD display will blink
with incoming ringing. This is not a fault.
1
ne
Li
Press the Handsfree button or pick up
the handset. Your Converse 2025 will
pick a line for you.
Dial the number.
Press the ringing Line 1 or Line 2
button. Your current call is ended and
you are connected to the new caller.
To end a call
Choose a specific line yourself:
1
ne
Li
ndsfree
Ha
Press the Handsfree button
Or
USING YOUR PHONE
Press the Line 1 or Line 2 button.
Handsfree mode is automatically
selected. You can pick up the handset
to make the call if preferred.
Replace the handset.
Dial the number.
Or
1
ne
Li
Press the button for the line you are
using, e.g. Line 1.
To answer a call
When the phone is in standby:
ndsfree
Ha
When the phone rings, press the
Handsfree button
Call timer
The call timer automatically begins at the
beginning of each call you make and receive.
Or
Pick up the handset.
If you are already talking on the other line:
The indicator light on the other line
flashes and the caller’s number is
displayed (providing you have
subscribed to your network provider’s
Caller Display service).
11
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
Last number redial
To redial the last number
Redial
Dial/Enter
Press the Redial button.
Press the Dial/Enter button. Your
phone automatically selects a line and
dials the last number.
Handsfree
Handsfree allows you to talk to your caller
without holding the handset and enables other
people in the room to take part in your
conversation.
To use handsfree
During a call, or to make a call:
Or
ndsfree
Ha
1
ne
Li
USING YOUR PHONE
Redial
Press the Line 1 or 2 button to select
the line.
Press the Redial button. The last number
is dialled.
Press the Handsfree button to switch
handsfree ON.
The handsfree indicator light will
come on.
ndsfree
Ha
To switch handsfree OFF, press the
Handsfree button again.
Secrecy/On hold
You can put a caller on hold. You can also then
talk to someone else in the room and your caller
will not be able to hear you.
To place a call on hold
During a conversation:
ld
Ho
Press the Hold button. The call is put
on hold.
The display shows HOLD and the Line
you are using and the Line indicator
light will flash.
1
ne
Li
12
Press the Line 1 or 2 button that you
were using or the Handsfree button to
return to your caller.
Headset
You can connect a headset to your Converse
2025, enabling you to keep your hands free for
other tasks. You cannot use the headset and
handsfree function at the same time.
Note
It is recommended that only headsets that have
acoustic shock protection are used with the
Converse 2025. Compatible BT headsets are
available from the following number: 0870
240 5522. You will also require a headset
adaptor to connect the 2.5mm headset jack.
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
To adjust the handset, headset and
handsfree volume
To connect the headset
Plug the headset into the socket on the
left side of the base.
Volume
In standby or in handsfree, to adjust
the speaker volume.
IMPORTANT
When the handset is picked up, to
adjust the handset volume
Your Converse 2025 must have the headset
function switched to ON. To switch on the
headset setting, see Settings menu, page 10.
To use the headset
Press the Handsfree button. The headset
is switched on and the handsfree
indicator comes on.
When the headset is switched on, to
adjust the headset volume.
Conference call
You can hold a conversation with two other
callers.
To make a conference call
Dial the number you want as normal.
Dial the number of the first person you
want to speak to.
Volume
ld
Ho
To adjust the ringer volume
2
ne
Li
Once you have spoken to the person,
press the Hold button. The display
shows HOLD and which Line you are
using, e.g. LINE 1 and the Line indicator
light will flash.
Press the Line button that is not in use,
e.g. LINE 2.
Dial the number of the second person.
Co
nf
You can set the ringer volume switch on
the rear of the base to Hi, Low or Off.
USING YOUR PHONE
ndsfree
Ha
You can press the + and – buttons:
ce
en
er
Press the Conference button to connect
the two lines.
13
To end the conference call, but continue
talking to one of the callers, press the
Line button you want to continue with,
e.g. if your press Line 1, the caller on
Line 2 will be disconnected.
ndsfree
Ha
S
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
Use the keypad to enter the name you
want.
To end the call, replace the handset or
press the Handsfree button or press
the active Line button.
For example to enter the name ANNE:
AB
2
Press once to enter A.
▲
Press the Up button to move the
cursor the next space.
C
Data port
MN
6
Press twice to enter N.
▲
Press the Up button to move the
cursor the next space.
O
The data port enables you to connect a PC,
fax machine or internet device to the telephone
network.
MN
6
Press twice to enter N
▲
Press the Up button to move the
cursor the next space.
O
The data port uses the Line 2 connection.
USING YOUR PHONE
Press the Store button. The display
shows ENTER NAME.
re
to
DE
3
Press twice to enter E.
1
Press 1 to enter special characters:
1,+‘&.()
F
Using the one-touch memory
You can store three of your most frequently
dialled names and numbers under the one-touch
buttons: M1, M2 or M3.
If you make a mistake press the
Delete or Down button to delete the
last character.
S
Stored numbers can be up to 28 digits long.
Stored names can be up to 12 characters long.
re
to
Press Store to confirm the entry.
To store a name and number under
a one-touch button
S
To enter a pause in a stored number
re
to
M1
Press the Store button. The display will
show SAVE TO?
Press the one-touch button you want
(M1, M2 or M3).
Enter the number you want. If you make
a mistake press the Delete or Down
button to delete the last digit.
14
You can insert a dialling pause into a
stored number. This adds a 2.5 second
delay in dialling.
Redial
When storing the number, press the
Redial button where you want to enter
the Pause.
To dial a number under a
one-touch button
S
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
re
to
Delete
Dial/Enter
Press the one-touch button (M1, M2 or
M3) you want.
Press the Dial/Enter button. The number
is dialled.
re
to
To view a number under a
one-touch button
Press the one touch button (M1, M2
or M3) you want to view. The display
shows the name and number stored
under that button.
re
to
Dire
You can dial the number by pressing
the Dial/Enter button.
M1
To edit a one-touch name and
number
M1
Edit
Delete
Press the one touch button (M1, M2 or
M3) you want to edit. The display shows
the name and number.
ry
cto
Press the one-touch button (M1, M2 or
M3) you want. The display shows the
name and number.
USING YOUR PHONE
Dial/Enter
Press the Store button to confirm the
new entry.
To copy a one touch name and
number to the directory
S
M1
Press the Delete or Down button to
delete characters.
Enter the new name. Pressing the Up
button moves the cursor to the right.
S
M1
Press the Store button to confirm.
The display shows EDIT NAME.
Press the Store button. The display
shows SAVE TO.
Press the Directory button.
Note
You cannot save two or more identical phone
numbers in the directory.
Press the Edit button. The display
shows EDIT NUMBER then the number is
displayed.
Press the Delete or Down button to
delete digits.
Enter the new number.
15
M1
Delete
Delete
Press and hold the one-touch button
(M1, M2 or M3)you want to delete. The
display shows the name and number.
re
to
re
to
Press Store to confirm the entry.
Press the Delete button. The display
shows ERASE THIS ITEM?
Press Delete to confirm. The display
shows ITEM IS ERASED.
Note
A memo card is provided so you can note the
Directory location that has been used.
To dial a directory number
You can store up to 32 of your most frequently
dialled numbers in the Converse 2025 directory.
Dire
Using the directory
USING YOUR PHONE
Press the Store button. The display
shows ENTER NAME.
Use the keypad to enter the name you
want. (See ‘To store a one-touch name
and number’ on page 14.)
S
To delete a one-touch name and
number
S
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
ry
cto
Stored numbers can be up to 28 digits long.
Stored names can be up to 12 characters long.
▲
▲
To store a name and number in the
directory
Dial/Enter
Press the Directory button. The display
shows DIR. ITEM and the number of
entries stored in the directory.
Press the Up and Down buttons to
scroll through the entries until the one
you want is displayed.
Press the Dial/Enter button to call the
number displayed.
ry
cto
Press the Store button.
Press the Directory button. The display
shows the first available memory
location and ENTER NUMBER.
Enter the number you want. If you
make a mistake press the Delete or
Down button to delete the last digit.
16
If you know the Directory location where
the number is stored:
Dire
Dire
S
Or
re
to
ry
cto
Press the Directory button.
The display shows DIR. ITEM and the
number of entries stored in the directory.
Using the keypad, enter the two digit
Directory location. The stored name/
number will be displayed.
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
▲
▲
Edit
Delete
Dire
Press the Directory button. The display
shows DIR. ITEM and the number of
entries stored.
Press the Up and Down buttons to
scroll through the entries until the one
you want is displayed.
Press the Edit button. The display
shows EDIT NUMBER then the number is
displayed.
ry
cto
▲
S
ry
cto
To copy a directory name and
number to a one-touch button
▲
Dire
To edit a directory name and number
re
to
Press the Delete or Down button to
delete digits.
M1
Press the Directory button. The display
shows DIR. ITEM and the number of
entries stored.
Press the Up and Down buttons to
scroll through the entries until the one
you want is displayed.
Press the Store button. The display
shows SAVE TO.
Press the one-touch button (M1, M2 or
M3) you want to copy the entry to.
S
Delete
Press the Store button to confirm.
The display shows EDIT NAME.
To delete a directory name and
number
Press the Delete or Down button to
delete characters.
Please note that you can only delete
directory entries one at a time.
Dire
Press the Store button to confirm the
new entry.
ry
cto
▲
▲
S
Enter the new name. Pressing the Up
button moves the cursor right.
re
to
USING YOUR PHONE
Enter the new number.
re
to
Delete
Delete
Press the Directory button. The display
shows DIR. ITEM and the number of
entries stored.
Press the Up and Down buttons to
scroll through to the entry you want to
delete.
Press the Delete button. The display
shows ERASE THIS ITEM?
Press Delete to confirm.
The display shows ITEM IS ERASED.
17
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
Caller Display
IMPORTANT
To use Caller Display you must first subscribe
to the service from your Network Provider.
A quarterly fee is payable. If you require all
calls to be displayed you will need to subscribe
to Caller Display for both lines. For more
information on BT’s Select Services call BT
free on 0800 800 150.
Calls list
Details of up to 64 incoming calls are stored in
the Calls list. If repeat calls from the same
number are received only the last call is listed and
the screen displays RPT to let you know that you
have been called by that number more than once.
CALLER DISPLAY
IMPORTANT
Using Caller Display
If you have subscribed to your Network
Provider’s Caller Display Service you will be
able to see the caller’s number on your phone’s
display prior to answering the call (provided the
number has not been withheld).
If a call is received and you have stored a name
and number into your directory (see page 16)
you will see both the name and number and
your screen will look like this:
NEW CALL
RPT 02
3:27 PM 1/18
0845-050 1331
JOHN SMITH
18
The Calls list shares memory space with the
Directory. Each new Directory entry will reduce
the Calls list by one, if necessary deleting the
oldest call record until a maximum of 32
Directory entries have been made. This will
allow 32 caller’s numbers in the Calls list.
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
New calls indicator
To dial a number from the Calls list
New calls are indicated by the New Call indicator
flashing slowly.
▲
▲
To view the Calls list
Dial/Enter
Press the Up or Down button to display
then scroll through the Calls list.
Press the Dial/Enter button to call the
number displayed.
When the phone is in standby
▲
Press the Up or Down button to scroll
through and view the Calls list.
S
CALLERS LIST = 04
Dire
M1
Press the 1 or 2 button on the keypad
to display the Calls list for that specific
line only.
ry
cto
Press the Store button. The display
shows SAVE TO?
Press the one-touch button (M1, M2
or M3) or Directory button to save the
number you have selected.
To delete a number in the Calls list
▲
LINE 1 LIST = 02
Press the Up or Down button to display
then scroll through the Calls list.
CALLER DISPLAY
re
to
▲
▲
▲
To save a caller’s number into the
directory or a one-touch button
Press the Up or Down button. The
display shows CALLERS LIST and the
number of Caller Display entries in the
list.
▲
▲
Press the Up or Down button to display
then scroll through the Calls list.
Delete
Whilst viewing a number, press the
Delete button. The display shows
ERASE THIS ITEM?
Delete
Press Delete again to confirm.
19
▲
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
To delete the Calls list for Line 1 or
Line 2
▲
Press the Up or Down button to display
the Calls list.
▲
Press the 1 or 2 button on the keypad to
select the Calls list you want to delete.
Delete
Delete
Press the Delete button. The display
shows, for example, ERASE LINE 1?
Press Delete again to confirm.
CALLER DISPLAY
To delete the entire Calls list for
both Lines
▲
▲
Delete
Delete
20
Press the Up or Down button until the
screen shows the total number of calls in
the Calls list.
Press the Delete button. The display
shows ERASE ALL CALLS?
Press Delete again to confirm.
Caller Display information not available
With some incoming calls the telephone number
of the caller is not available and therefore cannot
be displayed.
In this case your Converse 2025 provides you
with some explanatory information.
This will be one of the following:
The number is unavailable
UNAVAILABLE
The call has been made via
the operator
OPERATOR
The caller has withheld
their number
WITHHELD
International call
- - - Int’L - - -
The caller is ringing from
a payphone
PAYPHONE
Ringback call
RINGBACK
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
General information
Guarantee
Your Converse 2025 is guaranteed for a period
of 12 months from the date of purchase.
The conditions of this guarantee are:
• The guarantee shall only apply to defects that
occur within the 12 month guarantee period.
• The equipment is returned to BT or its agent
as instructed.
• This guarantee does not cover buttons and
any faults or defects caused by accidents,
misuse, fair wear and tear, neglect, storm
damage, tampering with the equipment, or
any attempt at adjustment or repair other
than through approved agents.
• This guarantee does not affect your statutory
rights.
If you experience difficulty using the product,
prior to returning your product, please read the
‘Help’ section beginning on page 23, or contact
the Converse 2025 Helpline for assistance:
0845 050 1331, 9am-5.30pm, Monday to Friday.
In the unlikely event of a defect occurring,
please follow the Helpline’s instructions for
replacement or repair.
GENERAL INFORMATION
Subject to the terms listed below, the guarantee
will provide for the repair of, or at BT’s or its
agent’s discretion the option to replace the
Converse 2025, or any component thereof, (other
than the batteries), which is identified as faulty
or below standard, or as a result of inferior
workmanship or materials. Products over 28 days
old may be replaced with a refurbished product.
Within the 12 month guarantee period:
Outside of the 12 month guarantee period:
If your product needs repair after the guarantee
period has ended, the repair must meet the
approval requirements for connection to the
telephone network. We recommend that you
contact BT’s approved repair agent TecLogic on
01672 564444 or a local qualified repairer.
Instruction for returning the product
If the Helpline/repair line is unable to remedy
your problem they will ask you to return the
product. Where possible, pack the product in its
original packaging. Please remember to include
all parts including the original batteries. (Please
note that we cannot take responsibility for
goods damaged in transit.) Please obtain and
keep proof of posting from the Post Office.
21
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
Technical information
How many phones can you have?
All items of telephone equipment have a
Ringer Equivalence Number (REN), which is
used to calculate the number of items which
may be connected to any one telephone line.
The Converse 2025 has a REN of 1. Any other
instrument provided by BT may be assumed
to have a REN of 1 unless otherwise stated.
A total REN of 4 is allowed.
Only use approved batteries as stated on page 7.
GENERAL INFORMATION
Switchboard compatibility
Generally this telephone may be connected to
switchboards which support tone and pulse
signalling and timed break recall. In the event
of any difficulties, please consult your
switchboard service provider.
22
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
Help
The Calls list doesn’t hold 64 numbers
Emergency calls
The emergency services can be contacted in the
UK by dialling 999 or 112 which is valid in
any country that is a member of the European
community.
Memory space is shared between Directory
and Calls list. For each directory entry, the
Calls list is reduced by one.
Helpline
If you need further help with your Converse
2025, call the Converse 2025 Helpline on 0845
050 1331.
No dial tone. The phone will not dial out
Are the telephone line cords plugged into the
phone sockets?
HELP
No ringer sound
The ringer may be switched off. Check the
ringer volume switch at the rear of the base.
Handset isn’t working
Make sure the handset coiled cord is connected
properly.
Caller’s name and/or number doesn’t appear on
the display
You must subscribe to your network provider’s
Caller Display service.
The Caller Display service may not work when
your phone is connected to certain types of
switchboard.
The caller has withheld their number.
23
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
Wall mounting
6
Note
Before you wall-mount your Converse 2025
check that:
• you are not drilling into any hidden wiring
Use the template provided to mark the
positions for drilling the two holes.
2
Drill the two holes using an 8mm drill bit.
WALL MOUNTING
1
Wall plug
Wall
Attach the wall mount to the base by first
inserting the hook then pressing in the clips
until they lock into place.
Screw
86mm
If desk mounted, please see page 9.
24
3
Insert the wall plugs if necessary then insert
the screws leaving about 8mm protruding
from the wall on which to hang the phone.
4
Connect the telephone line cords to the base
as shown in Setting Up, page 9.
5
Pull out and turn the handset catch 180° to
the wall mount position.
7
Hang the holes on the back of the wall mount
over the screwheads and gently slide the
phone down to make sure it is securely in
place.
8
Hang the handset on the handset clip.
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
Wall mounting template
Cut out this page and place the template on
the wall.
The location of the screws is indicated by the
centres of the crossed lines.
86mm
WALL MOUNTING
25
WALL MOUNTING
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
26
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
Index
Answer a call
8
8
18
11
11
13
11
12
12
11
11
12
19
19-20
18
19
19
7
13
10
10
14
Delete
calls list
directory entry
one touch entry
Desk mounting
Directory
copy to one-touch
dial
delete
edit
store
Display contrast – set
Display symbols
End a call
Guarantee
Handset – connect
Handsfree
Help
Headset
connection
on/off
using
Helpline
Hold
Indicator lights (at a glance)
Location of product
Make a call
19-20
17
16
9
17
16
17
17
16
10
3
11
21
9
12
23
INDEX
At a glance
Batteries
low warning
installation/replacement
Caller display
Call timer
Calls
answer
conference
end
handsfree
hold
make
receive
redial
Calls list
dial
delete
new calls indicator
save to directory or one-touch
view
Cleaning
Conference call
Contrast
Day/time set
Data port
11
1
13
10
12
9
12
1
8
11
27
INDEX
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
28
New calls indicator
One-touch memory
19
copy to directory
dial
delete
edit
enter a pause
store
view
Pause
Receive a call
Redial
Returning product
Ringer volume
Safety information
Screen display
Secrecy/on hold
Settings menu
Setting up
Switchboard compatibility
Technical information
Telephone socket
Telephone line cord
Time/date set
Unpacking
Volume
handsfree
handset
headset
ringer
Wall mounting
Wall mounting template
15
15
16
15
14
14
15
14
11
12
21
13
7
3
12
10
8
22
22
9
9
10
6
13
13
13
13
24
25
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
Declaration of Conformity
Application of Council Directive(s):
1999/5/EC
Standard(s) to which Conformity is Declared:
EN60950:1992 INC. AMENDMENTS A1:1993, A2:1993,
A3:1995, A4:1997, A11:1997
EN55022:1998, EN55024:1998
Name of manufacturer:
Kingtronics Industrial Co., Ltd.
Century Centre
44-46 Hung To Road
Kwun Tong
Kowloon
Hong Kong
2 Line Corded Telephone
Model No. : Converse 2025
I, the undersigned, hereby declare that the equipment
specified above conforms to the above Directive(s) and
Standard(s).
Place : Hong Kong
Date : 27th March 2002
William Tsang
Assistant to the Director
Converse 2025 2-Line ~ 4th Edition ~ 10th September ’02 ~ 4515
Offices worldwide
The Telecommunications services described in this publication
are subject to availability and may be modified from time to time.
Services and equipment are provided subject to British
Telecommunications plc’s respective standard conditions of contract.
Nothing in this publication forms any part of any contract.
TouchtoneTM is a registered trade mark of
British Telecommunications plc in the UK.
© British Telecommunications plc 2002.
Registered Office: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
Converse 2025 2-Line Issue 1 (9/02) 4
Designed by The Art & Design Partnership Limited.
Printed in China

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement