Specs-MP24BR-2

Specs-MP24BR-2
24" Marvel Professional
Beverage Refrigerator with
MaxStore™ Utility Bin
Model #MP24BR****
•D
ynamic Cooling Technology™ delivers rapid cooldown and the
industry’s best temperature stability
• Slide out convertible shelf—beverage storage or wine rack
configurations with stainless shelf front
• Professional styling: framed stainless steel door, sturdy full-length
handle, sleek stainless shelf fronts and 4” stainless steel toe kick
• MARVEL Intuit™ Integrated Controls provide precise temperature
management from 34°F to 42°F
• Two-stage, soft blue theatre-style LED lighting and sophisticated
midnight black interior
• MaxStore™ smooth-glide clear utility bin provides maximum volume
to effectively store large, bulky
or loose items
• Thermal-efficient cabinet ensures optimum food preservation and
energy efficiency while maximizing capacity
• Tinted, UV-resistant dual pane glass door protects wine from
damaging ultra-violet light
• Audible and visual alarms signal when door is left ajar to protect
food integrity
• Vacation/Sabbath mode conserves energy during times when the
unit is not in use and complies with Star-K requirements
• Door lock to protect your contents
Storage Capacity
• Height adjustment up to 1” with leveling legs
Up to 20 wine bottles total (7 flat)
Up to (162) 12-oz cans
• 3-year warranty
Storage Configuration
(1) f ull-width and roll out
(1) h
alf-width cantilevered, fully adjustable black powder
coated steel-framed glass shelf
(1) fixed black steel-framed glass shelf
(1) MaxStore™ Utility Bin
Product Dimensions
23⅞" W x 33¾" minimum H x 25 ⅝" D (including handle)
Finish/Door Options
Ordering Details
Stainless Frame, Glass Door With Lock,
Integrated Right Hinge
MP24BRG3RS
Stainless Frame, Glass Door With Lock,
Integrated Left Hinge
MP24BRG3LS
Panel Overlay Frame Ready Glass Door
with lock, Integrated Right Hinge
MP24BRF3RP
Panel Overlay Frame Ready Glass Door
with lock, Integrated Left Hinge
MP24BRF3LP
No panel installation kit required.
Stainless Steel
Wood Overlay
(Panel Ready)
Forced
Air Fan
"A"
Evaporator
Plate
"B"
Return
Air Intake
Front
"C"
24" Rough-In Dimensions
"A"
"B"
"C"
24"
34" to 35"
DIMENSIONS
(61 cm)
(86.4 cm to 88.9 cm)
PRODUCT
24"
(61 cm)
Forced
Air Fan
PRODUCT DATA
MODEL
MP15BCG
"D"
MP15BCF
ELECTRICAL
REQUIREMENTS #
PRODUCT
WEIGHT
115V/60Hz/15A
105 lbs
(47.6 kg)
115V/60Hz/15A
105 lbs
(47.6 kg)
Cabinet Dimensions
"E"
23 7⁄8”
(60.7
cm)
MP24**S
33 3⁄4” to 34 3⁄4”
(85.7 115V/60Hz/15A
to 88.3 cm)
MP24**G
115V/60Hz/15A
“G”
MP24**F
26 7⁄32”
(66.6 cm)
“H”
115V/60Hz/15A
461 3⁄32”
(117.9 cm)
"H"
Evaporator
Plate
"F"
23 23⁄32”
140 lbs
(60.2
cm)
Return
Air Intake
(63.6 kg)
140 lbs
(63.6 kg)
“J”
140 lbs
"J"
Front
(63.6
kg)
26
7⁄16”
(67.2 cm)
Side
"G"
"D"
"F"
Dynamic Cooling Technology™
delivers rapid cool down
and the industry’s best
temperature stability
"E"
The distinctive Marvel design features a
thermal-efficient cabinet and door combined
with Dynamic Cooling Technology™ for
superior temperature stability, faster cooling
times and speedy temperature recovery even
with high frequency.
31⁄2" (8.9 cm)
Minimum
Figure 6
Width
23 ⅞"
Control Type
Interior Finish
Black
Temperature Range
Up to 20 wine bottles
Lock
Up opening
to 162 12-oz
* Depth dimension of rough-in
maycans
vary depend- Electrical Requirements
ing on each individual installation.
ToMount
recess entire door "F"
Side
Shelving System
dimension
plus 1" (2.5 cm) forBottle
thickness
power cord plugLength of Power Cord
shape of
wire
is required.
Product Dimensions
Shelf Fronts
Stainless Steel
Depth to Front of Door
**
Minimum
requiredUtility
is to be
Other
Storagerough-in opening
MaxStore™
Binlarger than
Depth to Handle
the adjusted height of the cabinet.
Interior Lighting
2 LED Pods
Depth with door at 90°
Toe
Grill Finish 15 amp dedicatedStainless
#
A grounded
circuit Steel
is required. Follow
Capacity
all
local building codes when
installing
electrical
and appliHinge
Soft Close
Integrated
Hinge
Shipping Weight
ance.
Handle
Professional
7
211⁄2"
(54.6 cm)
Intuit™
34° - 42° F
Yes
120V / 60Hz / 15A
Finishes
Yes
Agency Approvals
CSA
5'
23 ⅞" W x 33 ¾" H x 21 ½" D
23 23/32"
26 7/32"
46 /32"
13
160 lbs
SS, O
Vacation /
Sabbath Mode
Finishes Key
SS = Stainless Steel
O= Overlay
Figure 13
Right Hand Hinged Door
15" (38.1 cm) wide appliance
143⁄4"
(37.5 cm)
⁄4" (6 mm)
Deep
233⁄4"
(60.3 cm)
⁄4"
(6 mm)
Deep
1
47⁄8"
5"
(12.4 cm) (12.7 cm)
14"
(35.6 cm)
31⁄8"
13⁄16"
13⁄16"
13⁄4" 1 (7.9 cm)
(3 cm)
3 ⁄8"
(3 cm)
(4.4 cm)
(7.9 cm)
327⁄32"
(9.8 cm)
3 1 ⁄8 "
(7.9 cm)
3011⁄32"
(77.1 cm)
1
1
⁄4" (6 mm)
⁄4" (6 mm)
is
radius radius
is
permissible
permissible
1
Softwood
7
3 ⁄8"
(7.9 cm)
Minimum
⁄64 (2.8 mm) Diameter. Pilot Hole
Figure 15
Left Hand Hinged Door
The preferred method of attaching the panel to the door
23 ⁄ it" cannot move while
is to clamp the panel to the door so
⁄"
(60.3 cm)
drilling the screw pilot holes. Use
bar clamps or "C" clamps
(6 mm)
with pads on the clamping surfaces that will not mar the
Deep
panel or the door. The custom overlay panel should be
1" (25.4 mm) diameter flush with the top of the door and centered along the width
1
counter bore ⁄4" (6 mm) of the door. See Figure 10a. Drill holes through the 1gasket
⁄"
14"
4⁄"
(4.4drill
cm)
4deep
⁄ " 6 places.
extrusion using
the
pilotcm)
holes. Use the
(12.4
cm)10 holes as(35.6
(12.4 cm)
size from the chart in Table "C", being
1 ⁄ " careful not to drill
3⁄"
(3
cm)
through the front surface of the panel, drill no deeper
than
(7.9 cm)
1
⁄2" (12.7 mm) deep. If the overlay panel is thinner than
3 ⁄ "
3 ⁄ "
5
⁄
8" (16 mm) thick shorter screws will have to be obtained.
(9.7 cm)
(9.8 cm)
Fasten the panel to the door with the 10 screws provided in
1
⁄4" (619a).
mm) Remove the clamps
the literature pack. (See Figure
is extrusion channels of
and replace the gasket in theradius
gasket
permissible
the door. Some force may be required to seat the gasket
into the channels. Be sure the gasket corners are seated
3⁄"
properly.3 ⁄ "
3⁄"
3
7
7
8
11⁄2"
3111"
⁄16"(2.5 cm) diameter
(3.8 cm)
(9.4 cm)
deep
x 1⁄4" (6 mm)typical
(9.4 cm)
4 places
Figure
DOOR PANEL INSTALLATION
Figure
18 14
3
3
27
27
32
1
8
1
8
4 1 ⁄8 "
(10.5 cm)
1 1 ⁄2 "
Minimum
111⁄16" (3.8 cm)
(4.3 cm)typical
#10 Wood Screw
⁄8" (3.2 mm) Diameter. Pilot Hole
7
Hardwood
1
Softwood
7
111⁄16"
(4.3 cm)
41⁄8"
(10.5 cm)
1 1 ⁄2 "
(3.8 cm)
typical
15⁄32"
311⁄16"
(9.4 cm)
Step 5: Asse
Figure 16
Left Hand Hinged Door
24" (61 cm) wide appliance
1
2
screw
Figure 19a
Press and hold this down
this tab on the wire connector and pull the connector
apart.
Clearance for
screw head,
4 places
Figure 9
⁄64 (2.8 mm) Diameter. Pilot Hole
143⁄4"
(37.5 cm)
Holes in
gasket
retainer.
Overlay panel to
be centered on
width of door.
B
1
⁄4" (6 mm)
Deep
1" (25.4 mm) diameter
counter bore 1⁄4" (6.4mm)
5"
47⁄8"
deep 4 places.
(12.7 cm) (12.4 cm)
Figure 19
Figure 10a
13⁄16"
(3 cm)
31⁄8"
(7.9 cm)
13⁄4"
(4.4 cm)
327⁄32"
(9.7 cm)
1
⁄4" (6 mm)
radius is
permissible
For comprehensive installation instructions,
please visit www.marvelrefrigeration.com
31⁄8"
(7.9 cm)
Install this lock a
panel and secur
with a 15 mm so
the front of the l
SPRING
NUT
LOCK
1/
1
⁄2" (13 mm) diameter drill
through door panel, from
other side (see detail
Clearance
above) 13⁄16" (20.5 mm)
forcounter
hinge bore, 7⁄16" (11 mm)
2 places
deep.
Overlay panel
flush with top
and side of
door.
Two (2) lock ext
longer extension
one for 5⁄8" thick
sion, cam stop w
lock as shown in
31⁄2"
(89 mm)
17
⁄32"
(13.7 mm)
Figure 11
Left Hand Hinged Door
15" (38.1 cm) wide appliance
⁄64 (2.8 mm) Diameter. Pilot Hole
#10 Wood Screw
Table
⁄8" (3.2Cmm) Diameter. Pilot Hole
The preferred method of attaching the panel to the door
is to clamp the panel to the door so it cannot move while
drilling 4:
theAssemble
screw pilot holes.
Use bartoclamps
or "C" clamps
Step
the panel
the door
with
pads on the
clamping
surfacesthe
thatpanel
will not
mardoor
the
The preferred
method
of attaching
to the
panel
or thethe
door.
Thetocustom
overlay
panel should
be
is to clamp
panel
the door
so it cannot
move while
flush
top pilot
of theholes.
door Use
and centered
along
theclamps
width
drillingwith
thethe
screw
bar clamps
or "C"
of
thepads
door.
10a.
Drill holes
with
onSee
the Figure
clamping
surfaces
thatthrough
will not the
margasket
the
extrusion
using
the
10
holes
as
pilot
holes.
Use
the
drill
panel or the door. The custom overlay panel should be
size
Table
careful
not the
to drill
flushfrom
with the
the chart
top ofinthe
door"C",
andbeing
centered
along
width
through
the See
frontFigure
surface10a.
of the
no deeper
than
of the door.
Drillpanel,
holesdrill
through
the gasket
1
⁄2" (12.7 mm)
If the
overlay
panel
is thinner
extrusion
usingdeep.
the 10
holes
as pilot
holes.
Use thethan
drill
5
⁄8" (16
mm)
screws
will have
to be
size
from
thethick
chartshorter
in Table
"C", being
careful
notobtained.
to drill
Fasten the
to the door
with
the 10
screws
provided
through
thepanel
front surface
of the
panel,
drill
no deeper
thanin
1
the
literature
pack.
(See
Figure
19a).
Remove
the
clamps
⁄2" (12.7 mm) deep. If the overlay panel is thinner than
5
and
replace
the gasket
the gasket
extrusion
⁄8" (16
mm) thick
shorterinscrews
will have
to bechannels
obtained.of
the
door.
Some
may
bewith
required
toscrews
seat theprovided
gasket in
Fasten
the
panelforce
to the
door
the 10
into
the channels.
sure
the gasket
corners are
the literature
pack.Be
(See
Figure
19a). Remove
the seated
clamps
properly.
and replace the gasket in the gasket extrusion channels of
the door. Some force may be required to seat the gasket
into the channels. Be sure the gasket corners are seated
properly.
Counter bore
lock hole
on back side.
#10 x ⁄ "
OVERLAY DOOR PANEL INSTALLATION
1413
Step 4: Assemble the panel to the door
31⁄8"
(7.9 cm)
OVERLAY DOOR PANEL INSTAL
2"
(5.1 cm)
1" (2.5 cm) diameter
x 1⁄4" (6 mm) deep
4 places
Table C
31⁄8"
(7.9 cm)
8
This side
to door
CAUTION
Softwood
Material Type
8
(7.9 cm)
Weight of overlay door panel must not exceed 15
! kg) for a solid door model or 10 pounds
pounds (6.8
(4.5 kg) for a glass door model.
Weight of overlay door panel must not exceed 15
pounds (6.8 kg) for a solid door model or 10 pounds
(4.5 kg) for a glass door model.
1
4
32
15⁄32"
(2.9 cm)
111⁄16"
(4.3 cm)
CAUTION
Hardwood
1
4
3011⁄32"
(77.1 cm)
15⁄32" 5
(2.9 cm)1 ⁄32"
(2.9 cm)
DOOR PANEL INSTALLATION
Material Type
16
(7.9 cm)
Right
Hand
Hinged
Door
Right
Hand
Hinged
Door
cm) wide
appliance
24"15"
(61(38.1
cm) wide
appliance
!
4
8
41⁄8"
(10.5 cm)
2"
311⁄16"
(5.1 cm)
⁄8" (3.2 mm) Diameter. Pilot Hole
Step 4: Assemble the panel 24"
to (61
thecm)
door
wide appliance
1
2"
(5.1 cm)
#10 Wood Screw
Hardwood
Table C
31⁄8"(7.9 cm)
(7.9 cm)
Minimum
1
This side
This side facing interior
to door
earance for
rew head,
places
earance for
rew head,
places
Material Type
1
13⁄4"
(4.4 cm)
3011⁄32"
(77.1 cm)
CAUTION
!
Clearance for
screw head,
4 places
Clearance
Figure 17 for hinge
Right Hand Hinged2Door
places
24" (61 cm) wide appliance
1
Clearance for
screw head,
4 places
Clearance
for hinge
at top and
r
of
oo
screw head,
do
d
bottom
f
or
o
Weight
of overlay
door
panel
must
not
4 places
p
Weight of overlay door panel
To must not exceed 15
exceed 15 pounds (6.8 kg) for
a
solid
pounds (6.8 kg) for a solid door model or 10 pounds
door model or 10 pounds (4.5
kg)
forfor
a a glass door model.
(4.5
kg)
glass door model.
CAUTION
Clearance for
3011⁄32"
(77.1 cm)
31⁄8"
13/16 COUNTER
BORE 7/16 DEEP
3/4 INCH
WOOD PANEL
Hinge side of door
Hinge side of door
Hinge side of door
To
p
!
Hinge side of door
Clearance
or
do
for hingep of
o
T
at top and
bottom
OVERLAY
DOOR
PANEL
INSTALLATION
OVERLAY
DOOR
PANEL
INSTALLATION
Hinge side of door
Overlay Panels
Step 6: Insta
Attach the lock c
the phillips head
cally when insta
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement