advertisement
1X8 HDMI Extender / Splitter
Single CAT5 3D Support and
Local Output
Model #: HDM3D-C53X-SET
© 2012 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited . www.avenview.com|1
Table of Contents
www.avenview.com|2
Section 1: Getting Started
1.1 Important Safeguards
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
1.2 Safety Instructions
The Avenview HDM3D-C5SP-8 HDMI Extender / Splitter over CAT5 with Full 3D Support and Local Output has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment’s, the HDM3D-C5SP-8 should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
Do not dismantle the housing or modify the module.
Dismantling the housing or modifying the module may result in electrical shock or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage or other hazards
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the housing, unplug the module immediately.
Have the module checked by a qualified service engineer before using it again. www.avenview.com|3
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
1.4 Introduction
The Avenview HDM3D-C5SP-8 HDMI 1.3 over Single CAT5 Splitter Extender with 3D Support and Local Output provides the most flexible solution by which the high definition video and high quality audio can be transmitted to different locations over a long distance. These devices can cascade, allowing you to extend
HDMI compliant displays almost anywhere. The input HDMI source can be duplicated and distributed to up to
8 HDMI enable displays through cost effective Cat-5/5e cables and RJ-45 to HDMI mini-extenders
HDM3D-C5-R-M or Long Range HDM-C53X-R. With the built in equalization, the input HDMI cable can be extended up to 20 meters (66 feet) long under Full HD, and make the overall transmission distance superior than regular HDMI splitters or matrix switches in the market. With use of Long Range Receiver, HDMI signal can be extended to 50 meters (165 feet).
- Supports HDMI Deep Color & Full 3D
- HDMI compliant
- HDCP compliant
- Regenerates the HDMI signal
- HDMI local output
- Supports default HDMI EDID and has the ability to learn the EDID of the displays
- Extends up to 20m (66ft) of input HDMI cable with Mini Receiver
- Extends up to 60m (200ft) (720p / 1080i) of output CAT5/6 cable with Long Range Receiver
- Extends up to 40m (130ft) (1080p) of output CAT5/6 cable
- Pure unaltered uncompressed 7.1ch digital HDMI over LAN cable transmission
- Allows cascading
- Perfectly integrated with other HDM-C5XD Series products www.avenview.com|4
1.5 Package Contents
Before you start the installation of the Extender/Splitter, please check the package contents.
-
-
HDM3D-C5SP-8
- Rack-mounting Ear Set
- User’s Manual
Power Adapter (+5VDC, 4A)
1.6 Before Installation
x 1 x 1 x 1 x 1
Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.
Do not twist or pull by force ends of the optical cable. It can cause malfunction. www.avenview.com|5
1.7 Panel Description
1.7.1 Front Panel
1 2
1.7.2 Rear Panel
3 4 5 6 7 8
Mode*
1. Signal:
Bright = HDMI Source Signal is Detected
Dark = No HDMI Signal
3. Power: On / Off Switch
5. HDMI Input
7. Mode*
2. Power:
Bright = Power On
Dark = Power Off
4. +5V DC: Interlocking Power Jack for 5V
DC Power Supply
6. HDMI Local Output
8. HDMI CAT5/6 Output
* 0 = [Video] –2D / Full-HD 24bit 1080p@60 [Audio] – up to 7.1ch surround sound
1 = [Video] –2D / Full-HD 24bit 1080p@60 [Audio] – up to 2.0ch surround sound
2 = [Video] –2D / Full-HD 36bit 1080p@60 [Audio] – up to 7.1ch surround sound
3 = [Video] –2D / Full-HD 36bit 1080p@60 [Audio] – up to 2.0ch surround sound
4 = [Video] –2D / HD 24bit (1080p@30)(1080i@60)(720p@60) [Audio] – up to 7.1ch surround sound
5 = [Video] –2D / HD 24bit (1080p@30)(1080i@60)(720p@60) [Audio] – up to 2.0ch surround sound
6 = [Video] –3D / Full-HD 36bit (1080p@60) [Audio] – up to 2.0ch surround sound
7 = [EDID Learning Mode] – learns EDID from the display www.avenview.com|6
1.8 EDID Learning
1. Power off the HDM3D-C5SP-8 and Display. Connect to HDMI OUTPUT with a HDMI Cable to the display you want the HDM3D-C5SP-8 to learn its EDID.
2. Set the mode to position”7”on the HDM3D-C5SP-8 2.
3. Power on the HDM3D-C5SP-8 and the Display - wait for about 6-8 seconds to complete the EDID learning process;
NOTE : Not necessary to power cycle again or even twice while plugging on different displays.
1.9 Installation
To setup Avenview HDM3D-C5SP-8 follow these steps for connecting to a device:
1. Turn off all devices including monitors / TV
2. Connect to a HDMI source (such as a Blu-Ray Disc player) to HDMI Input of HDM3D-C5SP-8
3. Connect the receiver HDM-C53X-R or HDM-C5-R-M to HDM3D-C5SP-8 from RJ45 Out with CAT5 /
CAT6 cable
4. Plug in 5V 4A DC Power (supplied).
5. Power on the HDMI display
6. Power on HDMI Sources. www.avenview.com|7
Section 2: Specifications
Item
Units
Unit Description
HDMI Compliance
HDCP Compliance
Video Bandwidth
Supported Resolutions
Resolution and Distance
Audio Support
Equalization
Input TMDS Signal
Input DDC Signal
ESD Protection
Input
Output
HDMI Connector
RJ45 Connector
Dimensions (L x W x H)
Power Supply
Power Consumption
Environmental
Operating Temperature
Storage Temperature
Relative Humidity
Description
HDM3D-C5SP-8
1 X8 HDMI Transmitter / Splitter over CAT5 / CAT6 with Full 3D Support
HDMI Deep Colour & Full 3D
Yes
Single Link 225 MHz (6.75Gbps)
480i / 480p / 720p / 1080i / 1080p60
Full HD: (1080p) ~ 40meter (130feet) (CAT5e) / 50meter (165feet) (CAT6)
HD: (720p/1080i) ~ 50meter (165feet) (CAT5e) / 60meter (200feet) (CAT6)
Surround Sound (up to 7.1 Ch) or Stereo Digital Audio
Built-in
1.2 Volts (peak-to-peak)
5 Volts (peak-to-peak, TTL)
- Human body model — ±15kV (air-gap discharge) & ±8kV (contact discharge)
- Core chipset — ±8kV
1 x HDMI
8 x Rj45
1 x HDMI
Type A (19 pin female)
WE/SS 8P8C
6.2” x 17.2” x 1.7”
5V 4A DC
13 Watt (max)
32˚ ~ 104˚F (0˚ to 40˚C)
-4˚ ~ 140˚F (-20˚ ~ 60˚C)
20~90% RH (no condensation) www.avenview.com|8
2.1 HDMI Pin Definition
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
Pin 10
TMDS Data2+
TMDS Data2 Shield
TMDS Data2–
TMDS Data1+
TMDS Data1 Shield
TMDS Data1–
TMDS Data0+
TMDS Data0 Shield
TMDS Data0–
TMDS Clock+
2.2 CAT5/6 Pin Definition
Type A (Receptacle) HDMI
Pin 11 TMDS Clock Shield
Pin 12 TMDS Clock–
Pin 13 NC
Pin 14 Reserved (N.C. on device)
Pin 15 SCL
Pin 16 SDA
Pin 17 DDC/CEC Ground
Pin 18 +5V Power
Pin 19 Hot Plug Detect www.avenview.com|9
Notice
1. The length depends on the characteristics and quality of the cables. Higher resolutions and longer transmission distances require low skew cables (<25ns/100m) for best performance. Unshielded or shielded CAT6 with metal RJ-45 connectors is recommended.
Performance Guide for HDMI over CAT 5/6 Cable Transmission
Performance rating
Wiring Shielding
Unshielded (UTP)
Solid
Shielded (STP)
Unshielded (UTP)
Stranded
Shielded (STP)
Termination
CAT5
Type of category cable
CAT5e
CAT6
Please use EIA/TIA-568-B termination (T568B) at any time
www.avenview.com|10
Disclaimer
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the
Avenview hardware, software, or other products and documentation provided herein.
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability, function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement. www.avenview.com|11
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project