Air

Gas Furnaces

RGGE Series

Rheem Prestige Series

™

Communicating

Modulating Downflow Gas Furnace equipped with the Comfort Control

2

System

RGGE- Series

A.F.U.E. up to 92.3%

Input Rates from 60-120 kBTU

[17.58 to 35.16 kW]

With Contour Comfort Control

®

✝ A.F.U.E. (Annual Fuel Utilization Efficiency) calculated in accordance with

Department of Energy test procedures.

• The Rheem Prestige Series ™ 90 Plus High Efficiency line of downflow gas furnaces are designed for utility rooms, closets, or alcoves, attics or crawl spaces. The design is certified by CSA.

• The Comfort Control 2 System™ provides 28 on-board

diagnostic and fault history codes on a dual 7-segment LED display, by detecting system and electrical problems. A “Call for Service” alert notification is sent via the thermostat to the homeowner for required service.

• Serial Communication Enhanced – When installed with a

Serial Com muni cat ing Condensing Unit and user interface control (RHC-TST550CMMS) 500 Series thermostat this unit offers 4 or 2 wire installation, auto-configuration, and diagnostic messaging with full communicating capability.

• Heat exchanger is constructed of all stainless steel for maximum corrosion resistance and thermal fatigue reliability.

• Modulating Function: when used with a modulating or communicating thermostat, modulation rate between 40% and

100% of total capacity.

• Two-stage Function: when used with a two-stage thermostat, furnace operates at 40% on first stage, and stages up to

65%, then 100% for second stage.

• Multistage Function: when used with a single-stage thermostat, furnace functions as a three stage furnace operating at

40%, 65% and 100% of total capacity.

• Reduced firing rates, electrically efficient ECM2+ motor, and solid doors provide the ultimate in quiet operation.

• Low speed constant fan.

• Constant temperature rise for superior comfort.

• Seven segment LED for system diagnostics.

• Diagnostic history for troubleshooting.

• Two-speed induced draft motor.

• Direct spark ignition with remote sense.

• Top electrical connections, left or right gas and condensate drainage connections on downflow models.

• Optional indoor or outdoor combustion air.

• A variety of cooling coils and plenums designed to use with the Rheem Prestige Series ™ 90 Plus gas furnaces are available as optional accessories.

FORM NO. G11-528

2

Air

Table of Contents

RGGE Series

TABLE OF CONTENTS

Standard & Optional Equipment ......................................................................3

Model Features ..............................................................................................4

Physical Data & Specifications ........................................................................5

Model Number Identification ............................................................................6

Dimensional Data............................................................................................7

Blower Performance Data ................................................................................8

Accessories ..............................................................................................9-10

Limited Warranty ..........................................................................................11

BLOWER ASSEMBLY WITH

ELECTRONIC COMMUTATED

MOTOR

Air

Standard & Optional Equipment

RGGE Series

INTEGRATED

FURNACE CONTROL

PRESSURE

SWITCHES

PRIMARY AND SECONDARY

HEAT EXCHANGER

DRAFT

INDUCER

DIRECT

SPARK

IGNITION

GAS VALVES

OR

REMOTE

SENSOR

IN-SHOT

BURNERS

STANDARD EQUIPMENT

Completely assembled and wired; heat exchanger; primary:

409 and aluminized 409 stainless steel, secondary: 29-4C stainless steel; induced draft; pressure switches; redundant modulating main gas control; blower compartment door safety switch; solid state time on/off blower control; limit controls; manual shut-off valve; 100% safety lock out; cool fan off delay; one hour automatic retry; power and self-test diagnostics; flame sense current diagnostics; electronic air cleaner connections; humidifier connections; humidifier on/off delay, dehumid ification connection; low speed continuous fan option; transformer; direct drive, ECM variable speed blower motor.

(Please note: a thermostat is not included as standard equipment. See “Accessories”).

(HA FUEL CODE) (HG FUEL CODE)

OPTIONAL EQUIPMENT

NOTE: Furnace is not listed for use with fuels other than natural or L.P. (propane) gas.

All models can be converted by a qualified distributor or local service dealer to use L.P. (propane) gas without changing burners. Factory approved kits must be used to convert from natural to L.P. (propane) gas and may be ordered as optional accessories from a parts distributor.

For L.P. (propane) operation, refer to Conversion Kit Index Form.

Fossil Fuel Kits for use with heat pumps.

Communicating Thermostat System

WARNING

THIS FURNACE IS NOT APPROVED

OR RECOMMENDED

FOR USE IN MOBILE HOMES

3

Air

Model Features

RGGE Series

The

Comfort Control

2

System

™

Features:

n The Rheem Dual 7-Segment LED Display easily shows system operating status codes and diagnostic codes.

n The Status Indication

System Diagnostics

feature thermostat communication capability and

built-in diagnostics. The thermostat communication capability and alerts the homeowner to any necessary service requirements.

Faster, more accurate

service is provided by the built-in diagnostics, by providing the HVAC professional with dependable information.

n The fault recall feature will allow for the last six faultcodes to be displayed, and will retain these codes even if power failure occurs.

n In order to save time and money, replacement automotive style fuses can be utilized instead of replacing the entire

control board.

Features of the RGGE Series:

• Serial Communication Enhanced – When installed with a

Serial Com muni cat ing Condensing Unit and user interface control (RHC-TST550CMMS) 500 Series thermostat this unit offers 4 or 2 wire installation, auto-configuration, and diagnostic messaging with full communicating capability.

• Reduced firing rates, electrically efficient ECM2+ motor, and solid doors provide the ultimate in quiet operation.

• Low speed constant fan.

• Constant temperature rise for superior comfort.

• Seven segment LED for system diagnostics.

• Heat exchanger is constructed of all stainless steel for maximum corrosion resistance and thermal fatigue reliability.

• Diagnostic history for troubleshooting.

• Two-speed induced draft motor.

• Modulating Function: when used with a modulating or communicating thermostat, modulation rate between 40% and

100% of total capacity.

• Direct spark ignition with remote sense.

• Two-stage Function: when used with a two-stage thermostat, furnace operates at 40% on first stage, and stages up to

65%, then 100% for second stage.

• Top electrical connections, left or right gas and condensate drainage connections on downflow models.

• Optional indoor or outdoor combustion air.

• Multistage Function: when used with a single-stage thermostat, furnace functions as a three stage furnace operating at

40%, 65% and 100% of total capacity.

• A variety of cooling coils and plenums designed to use with the Rheem Prestige Series ™ 90 Plus gas furnaces are available as optional accessories.

4

Air

Physical Data & Specifications

RGGE Series

Physical Data and Specifications—Downflow Models

U.S. and Canadian Models

MODEL NUMBERS

INPUT–MAXIMUM (BTU/HR) [kW]

HEATING CAPACITY–MAXIMUM [kW]

INPUT–MINIMUM (BTU/HR) [kW]

HEATING CAPACITY–MINIMUM [kW]

HEATING EXT. STATIC PRESSURE [kPa]

BLOWER (D X W IN.) [mm]

ECM MOTOR HP [W]

UNIT AMPS

MAXIMUM OVERCURRENT PROTECTION

HEATING CFM–MAXIMUM [L/s]

HEATING CFM–MINIMUM [L/s]

COOLING CFM–RANGE [L/s]

MAXIMUM EXT. STATIC PRESSURE [kPa]

TEMPERATURE RISE RANGE °F [°C]

MAX OUTLET AIR TEMPERATURE °F [°C]

RETURN AIR CABINETS–RXGR-

FILTER SIZE (IN.) [mm] BOTTOM

FILTER SIZE (IN.) [mm] SIDE

APPROX. SHIPPING WEIGHT (LBS.) [kg]

AFUE

RGGE-06EMCKS

60,000 [17.58]

54,720 [16.03]

24,000 [7.03]

21,888 [6.41]

0.12 [.029]

11 x 7 [279 x 178]

1/2 [373]

8.7

15

795 [375]

320 [151]

600-1200 [283-566]

0.80 [0.20]

40-70 [22.2-38.9]

180 [82.2]

C17B

15 3 /

4 x 25 [400 x 635]

15 3 /

4 x 25 [400 x 635]

127 [57.6]

91.2%

RGGE-07EMCKS

75,000 [21.98]

69,000 [20.22]

30,000 [8.79]

27,600 [8.09]

0.12 [.029]

11 x 7 [279 x 178]

1/2 [373]

8.7

15

995 [470]

430 [203]

600-1200 [283-566]

0.80 [0.20]

40-70 [22.2-38.9]

180 [82.2]

C17B

15 3 /

4 x 25 [400 x 635]

15 3 /

4 x 25 [400 x 635]

133 [60.3]

92.3%

RGGE-09EZCMS

90,000 [26.38]

83,160 [24.37]

36,000 [10.55]

33,264 [9.75]

0.15 [.037]

12 x 11 [305 x 279]

1 [746]

12.0

15

RGGE-10EZCMS

105,000 [30.77]

95,865 [28.09]

42,000 [12.31]

38,346 [11.24]

0.20 [.049]

12 x 11 [305 x 279]

1 [746]

12.0

15

RGGE-12ERCMS

120,000 [35.17]

110,880 [32.49]

48,000 [14.07]

44,352 [12.99]

0.20 [.049]

11 x 10 [279 x 254]

1 [746]

12.0

15

1195 [564]

515 [243]

1395 [658]

600 [283]

1595 [753]

685 [323]

1200-2000 [566-944] 1200-2000 [566-944] 1200-2000 [566-944]

0.80 [0.20] 0.80 [0.20] 0.80 [0.20]

40-70 [22.2-38.9]

180 [82.2]

C21B

40-70 [22.2-38.9]

190 [87.8]

C21B

40-70 [22.2-38.9]

195 [90.6]

C24B

19 1 /

4 x 25 [489 x 635] 19 1 /

4 x 25 [489 x 635] 22 3 /

4 x 25 [578 x 635]

15 3 /

4 x 25 [400 x 635] 15 3 /

4 x 25 [400 x 635] 15 3 /

4 x 25 [400 x 635]

158 [71.7]

92.3%

162 [73.5]

91%

170 [77.1]

92.2%

[ ] Designates Metric Conversions

5

Air

Model Number Identification

RGGE Series

Model Number Identification

R G G E 07E M C K S

Rheem Gas

Furnace

Downflow

Modulating

Prestige

Series ™

90 Plus

Gas Furnace

Design

Series

E –

Communicating

Electric

Ignition

06E

07E

09E

10E

12E

Heating Input

Designation

Electric

Ignition–

NOx Models

06N

07N

09N

10N

12N

Input

BTU/HR

60,000 [17.6 kW]

75,000 [22.0 kW]

90,000 [26.4 kW]

105,000 [30.7 kW]

120,000 [35.2 kW]

Blower Size

M = 11 x 7

[279 x 178 mm]

R = 11 x 10

[279 x 254 mm]

Z = 12 x 11

[305 x 279 mm]

Variations

C = Single/

Multi Zone

Heat/Cool

Designation

K = 600-1200 CFM

[283-566 L/s]

M = 1200-2000 CFM

[566-944 L/s]

Fuel Code

S = U.S. or

Canadian

Natural Gas

[ ] Designates Metric Conversions

6

Illustration

A084901.S01B

Illustration

A084901.S01A

Air

Dimensional Data

RGGE Series

Illustration

A084901.S01C

Dimensional Data

MODEL

RGGE-

06

07

09

10

12

A

17 1 /

2

[445]

17 1 /

2

[445]

21 [533]

21 [533]

24 1 /

2

[622]

B

16 11 /

32

[415]

16 11 /

32

[415]

19 27 /

32

[504]

19 27 /

32

[504]

23 11 /

32

[593]

C D E F

15 5 /

8 6

[397] 2 [51] 16 5 /

8

[422] 13 7 /

8

[352]

15 5 /

8 6

[397] 2 [51] 16 5 /

8

[422] 13 7 /

8

[352]

19 3 /

16

[487] 2 [51] 20 1 /

8

[511] 17 3 /

8

[441]

19 3 /

16

[487] 2 [51] 20 1 /

8

[511] 17 3 /

8

[441]

22 5 /

8 6

[575] 2 [51] 23 5 /

8

[600] 20 7 /

8

[530]

LEFT

SIDE

0

0

0

0

0

Illustration

A084901.S01D

RIGHT

SIDE

MINIMUM CLEARANCE (IN.) [mm]

BACK TOP FRONT VENT

0

0

0

0

0

0

0

0

0

0

1 [25]

1 [25]

1 [25]

1 [25]

1 [25]

2 [51]

2 [51]

2 [51]

2 [51]

2 [51]

0

0

0

0

0

[ ] Designates Metric Conversions

7

Air

Blower Performance Data

RGGE Series

Blower Performance Data

MODEL

RGGE-

BLOWER SIZE

(D x W)

IN. [mm]

06

11 x 7

[279 x 178]

07

09

10

12

11 x 7

[279 x 178]

12 x 11

[305 x 279]

12 x 11

[305 x 279]

11 x 10

[279 x 254]

[ ] Designates Metric Conversions

ICM

MOTOR H.P.

[W]

1/2

[373]

1/2

[373]

1

[746]

1

[746]

1

[746]

BLOWER

SPEED

(SELECTED W/DIP

SWITCHES)

HIGH

MED-HI

MED

LOW

HIGH

MED-HI

MED

LOW

HIGH

MED-HI

MED

LOW

HIGH

MED-HI

MED

LOW

HIGH

MED-HI

MED

LOW

CFM [L/s] AIR DELIVERY

EXTERNAL STATIC PRESSURE

INCHES WATER COLUMN [kPa]

0.1 [.02]-0.8 [.20]

1200 [566]

1000 [472]

800 [378]

600 [283]

1200 [566]

1000 [472]

800 [378]

600 [283]

2000 [944]

1600 [755]

1400 [661]

1200 [566]

2000 [944]

1600 [755]

1400 [661]

1200 [566]

2000 [944]

1600 [755]

1400 [661]

1200 [566]

8

VENT TERMINATION KITS CONCENTRIC:

HORIZONTAL/VERTICAL =

RXGY-E03A (US & Canadian Installations)

HORIZONTAL TWO PIPE: RXGY-D02, RXGY-D03, RXGY-D04

(US Installations)

RXGY-D02A, RXGY-D03A, RXGY-D04A (Canadian Installations)

RXGY-G02 (US Only)

NEUTRALIZER KIT: RXGY-A01

COMBUSTIBLE FLOOR BASE: RXGC-B17

RXGC-B21

RXGC-B24

EXTERNAL FILTER RACK: RXGF-CC

FILTER RACK FILTER SIZES* INCHES [mm]

MODEL RGGERXGF-CC

06

07

(2) 12 x 20 [305 x 508]

(2) 12 x 20 [305 x 508]

09

10

12

(2) 12 x 20 [305 x 508]

(2) 12 x 20 [305 x 508]

(2) 14 x 20 [305 x 508]

*Filter racks are shipped without filters.

Filters shipped with furnace may be used or a suitable 1" [25.4 mm] filter.

FOSSIL FUEL KIT: RXPF-F02

PLENUM DATA FOR “A” COILS

Plenum adapters are required in some instances for use on downflow applications when plenum and furnace size do not match.

FURNACE

WIDTH

IN. [mm]

17 1 /

2

[445]

17 1 /

2

[445]

17 1 /

2

[445]

17 1 /

2

[445]

21 [533]

21 [533]

21 [533]

24 1 /

2

[622]

24 1 /

2

[622]

PLENUM

WIDTH

IN. [mm]

16 1 /

4

[413]

20 1 /

4

[514]

21 5 /

8

[549]

25 1 /

4

[641]

25 1 /

4

[641]

22 1 /

4

[565]

21 5 /

8

[549]

25 1 /

4

[641]

21 5 /

8

[549]

PLENUM ADAPTER

UPFLOW

RXAA-C186

RXAA-C173

RXAA-C187

RXAA-C174

RXAA-C175

RXAA-C176

RXAA-C188

RXAA-C177

RXAA-C187

COIL

PLENUM

RXAL-B16BU

RXAL-B20BU

RXAL-B21BU

RXAL-B25BU

RXAL-B25BU

RXAL-B22BU

RXAL-B21BU

RXAL-B25BU

RXAL-B21BU

LP KIT: (Available through PROSTOCK ® )

U.S./Canadian = RXGJ-FP27 (HA & HB Fuel codes only).

U.S./Canadian = RXGJ-FP07 (HG & HH Fuel codes only).

Air

Accessories

RGGE Series

THERMOSTATS

RECOMMENDED MODULATING FURNACE THERMOSTAT

RHC-TST550CMMS

CONTRACTOR BENEFITS:

• Multi-Purpose Thermostat-Setup, Control & Diagnostics

• Auto-Configuration – No Manual Settings Required in the Field

• System History – More Accurate Diagnostics

• Easy Installation – Requires only 4 wires

• Diagnostic Messages (Service Access to Fault Codes)

• Blower Adjustment in Heat and Cool

• Programmable Fan

• USB Interface for contractor contact information and thermostat programming

HOMEOWNER BENEFITS:

• Scrolling System Status

• De-Humidification Control

• Humidification Control

• Heat/Cool/Auto Change-over

• Outdoor Temperature Display

• Backlight On/Off

• Intelligent Scheduling Ramp-Up/Program Anticipation

• Audio Notifications On/Off

• Air Filter, UV Lights & Humidifier Maintenance Reminder

• Temperature Offset

• Continuous Fan (Hi, Med, Lo)

*PROGRAMMABLE THERMOSTAT ACCESSORIES:

Adapter Plate = F61-2600

Remote F1451328 and F1451378 Sensor

*Available through PROSTOCK ® .

[ ] Designates Metric Conversions

9

Air

Accessories

RGGE Series

FOR HIGH ALTITUDES:

RGGE HIGH ALTITUDE FIELD CONVERSION KITS:

MODEL INPUT (KBTU) KIT NO.

RGGE-06

RGGE-07

RGGE-09*

RGGE-10*

60,000

75,000

90,000

105,000

None Needed

RXGY-F23

RXGY-F24

RXGY-F25

RGGE-12* 120,000 RXGY-F26

*5000 ft. & above only (except where noted).

OPTION CODE FOR HIGH ALTITUDE: None Available - Kit must be purchased

NOTE: High altitude kits do NOT include additional burner orifices. If a burner orifice change is necessary, they must be ordered through PROSTOCK ® . See Installation Instructions for more information.

CAUTION: Always follow National Fuel Gas Code (NFGC) guidelines when converting furnaces for high altitudes.

For all installations above 2000 ft. the burner orifice size must be recalculated and verified. A burner orifice change may still be required. See Installation Instructions for more information.

Manifold gas pressure reduction methods may NOT be used on these models. The only method permitted on modulating furnace models is to recalculate the burner orifice size. See Installation Instructions for more information.

ALTERNATE (LEFT SIDE) CONDENSATE DRAIN KIT:

RXGY-H01 (All Models)

[ ] Designates Metric Conversions

10

Air

Limited Warranty

RGGE Series

GENERAL TERMS OF LIMITED WARRANTY*

Rheem will furnish a replacement for any part of this product which fails in normal use and service within the applicable period stated, in accordance with the terms of the limited warranty.

*For complete details of the Limited and Conditional Warranties, including applicable terms and conditions, contact your local contractor or the

Manufacturer for a copy of the product warranty certificate.

Conditional Unit Replacement

(Registration Required) ..............................Limited Lifetime

Parts ..................................................................Ten (10) Years

Heat Exchanger ............................................Limited Lifetime

11

The new degree of comfort.

™

In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.

Rheem Heating, Cooling & Water Heating • P.O. Box 17010

Fort Smith, Arkansas 72917 • www.rheem.com

Rheem Canada Ltd./Ltée • 125 Edgeware Road, Unit 1

Brampton, Ontario • L6Y 0P5

PRINTED IN U.S.A 04/12 QG FORM NO. G11-528