Brother HL HL-3070CW User`s guide

Brother HL HL-3070CW User`s guide
Multi-Protocol On-board Ethernet Print Server and Wireless
(IEEE 802.11b/g) Ethernet Print Server
NETWORK
USER’S GUIDE
HL-3040CN
HL-3070CW
Please read this manual thoroughly before using the machine.
Keep the CD-ROM in a convenient place so you can use it quickly
if you need to.
Please visit us at http://solutions.brother.com/ where you can get
product support, the latest driver updates and utilities, and
answers to frequently asked questions (FAQs) and technical
questions.
Note: Not all models are available in all countries.
Version 0
ENG
Symbols used in this guide
We use the following icons throughout this User’s Guide:
IMPORTANT describes procedures you must follow or avoid to prevent possible printer
problems or printer damage, or damage to other objects.
Notes tell you how you should respond to a situation that may arise or give tips about
how the current operation works with other features.
Trademarks
Brother and the Brother logo are registered trademarks and BRAdmin Light and BRAdmin Professional are
trademarks of Brother Industries, Ltd.
Microsoft, Windows, Windows Server and Internet Explorer are registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Windows Vista is either a registered trademark or a trademark of Microsoft Corporation in the United States
and/or other countries.
Apple, Macintosh and Safari are trademarks of Apple Inc., registered in the United States and other countries.
Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.
UNIX is a registered trademark of The Open Group in the United States and other countries.
PostScript and PostScript3 are either registered trademarks or trademarks of Adobe Systems Incorporated
in the United States and/or other countries.
BROADCOM, SecureEasySetup and the SecureEasySetup logo are trademarks or registered trademarks of
Broadcom Corporation in the United States and/or other countries.
Wi-Fi, Wi-Fi Alliance, WPA, WPA2, Wi-Fi Protected Access and Wi-Fi Protected Setup are either trademarks
or registered trademarks of Wi-Fi Alliance in the United States and/or other countries.
AOSS is a trademark of Buffalo Inc.
Each company whose software title is mentioned in this manual has a Software License Agreement specific
to its proprietary programs.
All other trademarks are the property of their respective owners.
i
Compilation and publication notice
Under the supervision of Brother Industries Ltd., this manual has been compiled and published, covering the
latest product’s descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without notice.
Brother reserves the right to make changes without notice in the specifications and materials contained
herein and shall not be responsible for any damages (including consequential) caused by reliance on the
materials presented, including but not limited to typographical and other errors relating to the publication.
©2009 Brother Industries Ltd.
IMPORTANT NOTE
„ This product is approved for use in the country of purchase only.
Do not use this product outside the country of purchase as it may violate the wireless telecommunication
and power regulations of that country.
„ Windows® XP in this document represents Windows® XP Professional, Windows® XP Professional x64
Edition and Windows® XP Home Edition.
„ Windows Server® 2003 in this document represents Windows Server® 2003 and Windows Server® 2003
x64 Edition.
„ Windows Vista® in this document represents all editions of Windows Vista®.
„ The printer illustration is based on HL-3070CW.
ii
Brother numbers
IMPORTANT
For technical and operational assistance, you must call the country where you purchased the machine.
Calls must be made from within that country.
For Customer Service
In USA
In Canada
In Brazil
In Europe
1-877-BROTHER (1-877-276-8437)
1-877-BROTHER
[email protected]
Visit http://www.brother.com/ for contact information on your local Brother office.
„ Service center locator (USA)
For the location of a Brother authorized service center, call 1-877-BROTHER (1-877-276-8437).
„ Service center locations (Canada)
For the location of a Brother authorized service center, call 1-877-BROTHER.
If you have any comments or suggestions, please write to us at:
In USA
Printer Customer Support
Brother International Corporation 7905 North Brother Boulevard Bartlett, TN 38133
In Canada
Brother International Corporation (Canada), Ltd.
- Marketing Dept.
1 Hôtel de Ville
Dollard des Ormeaux, QC
H9B 3H6
Canada
In Brazil
Brother International Corporation do Brasil Ltda.
Av. Paulista, 854 - 15 and. - Ed. Top CenterCEP: 01310-100 - Sao Paulo - SP - Brasil
In Europe
European Product & Service Support
1 Tame StreetAudenshaw
Manchester, M34 5JE, UK
iii
Internet address
Brother Global Website: http://www.brother.com/
For Frequently Asked Questions (FAQs), Product Support, Driver Updates and Utilities:
http://solutions.brother.com/
Ordering accessories and supplies
In USA
1-877-552-MALL (1-877-552-6255)
1-800-947-1445 (fax)
http://www.brothermall.com/
In Canada
1-877-BROTHER
http://www.brother.ca/
iv
Table of Contents
1
Introduction
1
Overview....................................................................................................................................................1
Network features........................................................................................................................................2
Network printing...................................................................................................................................2
Management utilities............................................................................................................................2
Types of network connections ...................................................................................................................4
Network connection example ..............................................................................................................4
Wireless network connection examples (For HL-3070CW) .................................................................6
Protocols....................................................................................................................................................7
TCP/IP protocols and functions ...........................................................................................................7
Other Protocol .....................................................................................................................................9
2
Configuring your machine for a network
10
Overview..................................................................................................................................................10
IP addresses, subnet masks and gateways ............................................................................................10
IP address .........................................................................................................................................10
Subnet mask......................................................................................................................................11
Gateway (and router).........................................................................................................................11
Step by step chart....................................................................................................................................12
Setting the IP address and subnet mask .................................................................................................13
Using the BRAdmin Light utility to configure your machine as a network printer ..............................13
Using the control panel to configure your machine for a network......................................................15
Using other methods to configure your machine for a network .........................................................15
Changing the print server settings ...........................................................................................................16
Using the BRAdmin Light utility to change the print server settings ..................................................16
Using the BRAdmin Professional 3 utility to change the print server settings (For
Windows®).....................................................................................................................................16
Using Web Based Management (web browser) to change the print server settings .........................17
Using the control panel to change the print server settings...............................................................17
Using other methods to change print server settings ........................................................................17
3
Configuring your machine for a wireless network (For HL-3070CW)
18
Overview..................................................................................................................................................18
Wireless network terms and concepts .....................................................................................................19
SSID (Service Set Identifier) and channels .......................................................................................19
Authentication and encryption ...........................................................................................................19
Step by step chart for wireless network configuration .............................................................................22
For Infrastructure mode .....................................................................................................................22
For Ad-hoc mode...............................................................................................................................23
v
Confirm your network environment..........................................................................................................24
Connected to a computer with an access point in the network (Infrastructure mode).......................24
Connected to a wireless capable computer without an access point in the network (Adhoc mode) .....................................................................................................................................24
Confirm your wireless network setup method..........................................................................................25
Configuration using the Brother installer application on the CD-ROM to configure your
machine for a wireless network (Recommended) .........................................................................25
Configuration using SES/WPS or AOSS from the control panel menu to configure your
machine for a wireless network (Infrastructure mode only) ...........................................................26
Configuration using the PIN Method of Wi-Fi Protected Setup to configure your machine
for a wireless network (Infrastructure mode only)..........................................................................27
Configure your machine for a wireless network.......................................................................................28
Using the Brother installer application on the CD-ROM to configure your machine for a
wireless network (Recommended) ................................................................................................28
Using SES/WPS or AOSS from the control panel menu to configure your machine for a
wireless network ............................................................................................................................28
Using the PIN Method of Wi-Fi Protected Setup to configure your machine for a wireless
network ..........................................................................................................................................28
4
Wireless configuration for Windows® using the Brother automatic installer
application (For HL-3070CW)
29
Configuration in Infrastructure mode .......................................................................................................29
Before configuring the wireless settings ............................................................................................29
Configure the wireless settings..........................................................................................................31
Configuration in Infrastructure mode using SES/WPS or AOSS from the control panel menu
(without network cable).........................................................................................................................40
Before configuring the wireless settings ............................................................................................40
Configure the wireless settings..........................................................................................................41
Configuration in Ad-hoc mode .................................................................................................................46
Before configuring the wireless settings ............................................................................................46
Configure the wireless settings..........................................................................................................47
Installing the printer driver .......................................................................................................................57
5
Wireless Configuration for Macintosh using the Brother installer
application (For HL-3070CW)
60
Configuration in Infrastructure mode .......................................................................................................60
Before configuring the wireless settings ............................................................................................60
Configure the wireless settings..........................................................................................................62
Configuration in Infrastructure mode using SES/WPS or AOSS from the control panel menu
(without network cable).........................................................................................................................70
Before configuring the wireless settings ............................................................................................70
Configure the wireless settings..........................................................................................................71
Configuration in Ad-hoc mode .................................................................................................................76
Before configuring the wireless settings ............................................................................................76
vi
Configure the wireless settings..........................................................................................................77
Installing the printer driver .......................................................................................................................86
6
Wireless configuration using SES/WPS or AOSS from the control panel
(For HL-3070CW)
88
Overview..................................................................................................................................................88
How to configure your wireless machine, using SES/WPS or AOSS from the control panel
menu.....................................................................................................................................................89
For Windows® users..........................................................................................................................91
For Macintosh users ..........................................................................................................................95
7
Wireless configuration using the PIN Method of Wi-Fi Protected Setup (For
HL-3070CW)
98
Overview..................................................................................................................................................98
How to configure your wireless machine, using the PIN Method of Wi-Fi Protected Setup ....................98
For Windows® users........................................................................................................................100
For Macintosh users ........................................................................................................................104
8
Control panel features
107
Overview................................................................................................................................................107
Network menu........................................................................................................................................108
TCP/IP .............................................................................................................................................108
Ethernet (wired network only)..........................................................................................................116
Factory Reset ..................................................................................................................................116
Set to Default (For HL-3070CW) .....................................................................................................116
Wired Enable (For HL-3070CW wired network only).......................................................................117
WLAN Enable (For HL-3070CW wireless network only) .................................................................117
SES/WPS or AOSS (For HL-3070CW wireless network only) ........................................................117
WPS w/PIN Code (For HL-3070CW wireless network only) ...........................................................118
WLAN Status (For HL-3070CW wireless network only) ..................................................................118
Reset the network settings to the factory default...................................................................................122
Printing the Network Configuration page ...............................................................................................123
9
Driver Deployment Wizard (Windows® only)
124
Overview................................................................................................................................................124
Connection methods..............................................................................................................................124
Peer-to-peer ....................................................................................................................................124
Network Shared ...............................................................................................................................125
Local Printer (USB)..........................................................................................................................125
How to install the Driver Deployment Wizard software..........................................................................126
Using the Driver Deployment Wizard software ......................................................................................127
vii
10
Web Based Management
130
Overview................................................................................................................................................130
How to configure the print server settings using Web Based Management (web browser) ..................131
11
Network printing from Windows® basic TCP/IP Peer-to-Peer printing
132
Overview................................................................................................................................................132
Configuring the standard TCP/IP port....................................................................................................133
Printer driver not yet installed ..........................................................................................................133
Printer driver already installed .........................................................................................................135
Other sources of information .................................................................................................................135
12
Internet printing for Windows®
136
Overview................................................................................................................................................136
IPP printing for Windows® 2000/XP, Windows Vista® and Windows Server® 2003/2008 ....................136
For Windows Vista® and Windows Server® 2008 ...........................................................................136
For Windows® 2000/XP and Windows Server® 2003 .....................................................................138
Specifying a different URL...............................................................................................................140
Other sources of information .................................................................................................................140
13
Network printing from Macintosh using the BR-Script 3 driver (For HL3070CW)
141
Overview................................................................................................................................................141
How to choose the printer driver (TCP/IP).............................................................................................141
14
Security features
145
Overview................................................................................................................................................145
Security terms..................................................................................................................................145
Security protocols ............................................................................................................................146
Security methods for E-mail notification ..........................................................................................146
Configuring the protocol settings ...........................................................................................................147
Managing your network printer securely................................................................................................148
Secure Management using Web Based Management (web browser) ............................................148
Secure Management using BRAdmin Professional 3 (for Windows®) ............................................151
Secure Function Lock 2.0 (For HL-3070CW) ........................................................................................152
How to configure the Secure Function Lock 2.0 settings using Web Based Management
(web browser)..............................................................................................................................152
Printing documents securely using IPPS...............................................................................................155
Specifying a different URL...............................................................................................................155
Using E-mail notification with user authentication .................................................................................156
Creating and installing a certificate........................................................................................................158
Creating and installing a self-signed certificate ...............................................................................160
viii
Creating CSR and installing a certificate .........................................................................................173
Import and export the certificate and private key.............................................................................175
15
Troubleshooting
176
Overview................................................................................................................................................176
General problems ..................................................................................................................................176
Network print software installation problems .........................................................................................178
Printing problems...................................................................................................................................181
Protocol-specific troubleshooting...........................................................................................................182
Windows® 2000/XP, Windows Vista® and Windows Server® 2003/2008 IPP
troubleshooting ............................................................................................................................182
Web Based Management (web browser) troubleshooting (TCP/IP)................................................182
Wireless network troubleshooting (For HL-3070CW) ............................................................................183
Wireless setup problems .................................................................................................................183
Wireless connection problem ..........................................................................................................184
A
Appendix
185
Using services .......................................................................................................................................185
Other ways to set the IP address (For advanced users and administrators).........................................185
Using DHCP to configure the IP address ........................................................................................185
Using BOOTP to configure the IP address......................................................................................186
Using RARP to configure the IP address ........................................................................................187
Using APIPA to configure the IP address........................................................................................187
Using ARP to configure the IP address ...........................................................................................188
Using the TELNET console to configure the IP address .................................................................189
Using the Brother Web BRAdmin server software for IIS to configure the IP address....................190
Installation when using a Network Print Queue or Share ......................................................................191
Installation when using Web Services (For Windows Vista® users) ......................................................192
B
Appendix
193
Print server specifications......................................................................................................................193
Ethernet wired network....................................................................................................................193
Wireless network (for HL-3070CW).................................................................................................194
Function table and factory default settings ............................................................................................195
C
Appendix
197
Open Source Licensing Remarks ..........................................................................................................197
OpenSSL statements ......................................................................................................................197
Part of the software embedded in this product is gSOAP software.................................................199
This product includes SNMP software from WestHawk Ltd. ...........................................................199
D
Index
200
ix
Introduc tion 1
1
Introduction
1
1
Overview
1
Your Brother machine can be shared on a 10/100 MB wired or IEEE 802.11b/802.11g wireless Ethernet
network using the internal network print server. The print server provides printing services for
Windows® 2000/XP/XP Professional x64 Edition, Windows Vista®, Windows Server® 2003/2008, Windows
Server® 2003 x64 Edition supporting the TCP/IP protocols and Macintosh OS X 10.3.9 or greater supporting
TCP/IP. The following chart shows what network features and connections are supported by each operating
system.
Operating Systems
Windows® 2000/XP
Mac OS X 10.3.9 or greater
Windows® XP Professional x64
Edition
Windows Vista®
Windows Server® 2003/2008
Windows Server® 2003 x64 Edition
10/100BASE-TX Wired Ethernet
(TCP/IP)
r
r
IEEE 802.11b/g Wireless Ethernet
(TCP/IP) 1
r
r
Printing
r
r
BRAdmin Light
r
r
BRAdmin Professional 3 2
r
Web BRAdmin 2
r
BRPrint Auditor 2 3
r
Web Based Management
(web browser)
r
Internet Printing (IPP)
r
Status Monitor 4
r
Driver Deployment Wizard
r
r
r
1
Only the HL-3070CW has IEEE 802.11b/g Wireless Ethernet (TCP/IP) available.
2
BRAdmin Professional 3, Web BRAdmin and BRPrint Auditor are available as a download from http://solutions.brother.com/.
3
Available when using BRAdmin Professional 3 or Web BRAdmin with devices that are connected to your client PC via USB.
4
For more information, see the User’s Guide on the CD-ROM.
To use the Brother machine through a network, you need to configure the print server, and set up the
computers you use.
1
Introduction
Network features
1
1
Your Brother machine has the following basic network functions.
Network printing
1
The print server provides printing services for Windows® 2000/XP/XP Professional x64 Edition, Windows
Vista®and Windows Server® 2003/2008 supporting TCP/IP protocols and Macintosh supporting TCP/IP (Mac
OS X 10.3.9 or greater).
Management utilities
1
BRAdmin Light
1
BRAdmin Light is a utility for initial setup of Brother network connected devices. This utility can search for
Brother products on your network, view the status and configure basic network settings, such as IP address.
The BRAdmin Light utility is available for Windows® 2000/XP, Windows Vista®and Windows Server®
2003/2008 and Mac OS X 10.3.9 (or greater) computers. For installing BRAdmin Light on Windows®, please
see the Quick Setup Guide we provided with the machine. For Macintosh users, BRAdmin Light will be
installed automatically when you install the printer driver. If you have already installed the printer driver, you
don’t have to install it again.
For more information on BRAdmin Light, visit us at http://solutions.brother.com/.
BRAdmin Professional 3 (for Windows®)
1
BRAdmin Professional 3 is a utility for more advanced management of network connected Brother devices.
This utility can search for Brother products on your network and view the device status from an easy to read
explorer style window that changes color identifying the status of each device. You can configure network
and device settings along with the ability to update device firmware from a Windows® computer on your LAN.
BRAdmin Professional 3 can also log activity of brother devices on your network and export the log data in
an HTML, CSV, TXT or SQL format.
For users who want to monitor locally connected printers, install the BRPrint Auditor software on the client
PC. This utility allows you to monitor printers that are connected to a client PC via the USB from BRAdmin
Professional 3.
For more information and downloading, visit us at http://solutions.brother.com/.
2
Introduction
Web BRAdmin (for Windows®)
1
1
Web BRAdmin is a utility for managing network connected Brother devices on your LAN and WAN. This utility
can search for Brother products on your network, view the status and configure the network settings. Unlike
BRAdmin Professional 3, which is designed for Windows® only, Web BRAdmin is a server based utility that
can be accessed from any client PC with a web browser that supports JRE (Java Runtime Environment). By
installing the Web BRAdmin server utility on a PC running IIS 1, connect to the Web BRAdmin server, which
then communicates with the device itself.
For more information and downloading, visit us at http://solutions.brother.com/.
1
Internet Information Server 4.0 or Internet Information Services 5.0/5.1/6.0/7.0
BRPrint Auditor (for Windows®)
1
The BRPrint Auditor software brings the monitoring power of Brother network management tools to locally
connected machines. This utility allows a client computer to collect usage and status information from a
machine connected via the USB interface. The BRPrint Auditor can then pass this information to another
computer on the network running BRAdmin Professional 3 or Web BRAdmin 1.45 or greater. This allows the
administrator to check items such as page counts, toner and drum status and the firmware version. In addition
to reporting to Brother network management applications this utility can E-mail the usage and status
information directly to a predefined E-mail address in a CSV or XML file format (SMTP Mail support required).
The BRPrint Auditor utility also supports E-mail notification for reporting warning and error conditions.
Web Based Management (web browser)
1
Web Based Management (web browser) is a utility for managing network connected Brother devices, using
the HTTP (Hyper Text Transfer Protocol). This utility can view the status of Brother products on your network
and configure the machine or network settings using a standard web browser that is installed on your
computer.
For more information, see Chapter 10: Web Based Management.
For increased security Web Based Management also support HTTPS. For more information see Managing
your network printer securely on page 148.
3
Introduction
Types of network connections
1
1
Network connection example
1
Peer-to-Peer printing using TCP/IP
1
In a Peer-to-Peer environment, each computer directly sends and receives data to each device. There is no
central server controlling file access or printer sharing.
Windows
R
Windows
R
Windows
R
2
1
TCP/IP
TCP/IP
1) Router
2) Network printer (your machine)
„ In a smaller network of 2 or 3 computers, we recommend the Peer-to-Peer printing method as it is easier
to configure than the Network Shared printing method. See Network Shared printing on page 5.
„ Each computer must use the TCP/IP Protocol.
„ The Brother machine needs to have an appropriate IP address configuration.
„ If you are using a router, the Gateway address must be configured on the computers and the Brother
machine.
4
Introduction
Network Shared printing
1
In a Network Shared environment, each computer sends data via a centrally controlled computer. This type
of computer is often called a “Server” or a “Print Server”. Its job is to control the printing of all print jobs.
1
Windows
R
Windows
R
1
Windows
R
3
TCP/IP
1
Windows
R
2
4
1) Client computer
2) Also known as “Server” or “Print server”
3) TCP/IP or USB
4) Printer (your machine)
„ In a larger network, we recommend a Network Shared printing environment.
„ The “Server” or the “Print server” must use the TCP/IP print protocol.
„ The Brother machine needs to have an appropriate IP address configuration unless the machine is
connected via the USB interface at the server.
5
1
Introduction
Wireless network connection examples (For HL-3070CW)
1
1
Connected to a computer with an access point on the network (Infrastructure mode)
1
This type of network has a central access point at the heart of the network. The access point can also act as
a bridge or a gateway to a wired network. When the Brother wireless machine (your machine) is part of this
network, it receives all print jobs via an access point.
1
4
2
3
1) Access point
2) Wireless network printer (your machine)
3) Wireless capable computer communicating with the access point
4) Wired computer which is not wireless capable connected to the access point with the Ethernet
cable
Connected to a wireless capable computer without an access point on the network (Ad-hoc
mode)
1
This type of network does not have a central access point. Each wireless client communicates directly with
each other. When the Brother wireless machine (your machine) is part of this network, it receives all print jobs
directly from the computer sending the print data.
2
1
2
1) Wireless network printer (your machine)
2) Wireless capable computer
6
Introduction
Protocols
1
1
TCP/IP protocols and functions
1
Protocols are the standardized sets of rules for transmitting data on a network. Protocols allow users to gain
access to network connected resources.
The print server used on this Brother product supports the TCP/IP (Transmission Control Protocol/Internet
Protocol) protocols.
TCP/IP is the most popular set of protocols used for communication such as Internet and E-mail. This protocol
can be used in almost all operating systems such as Windows®, Windows Server®, Mac OS X and Linux ®.
The following TCP/IP protocols are available on this Brother product.
Note
• You can configure the protocol settings by using the HTTP interface (web browser).
See How to configure the print server settings using Web Based Management (web browser) on
page 131.
• For information about the security protocols, see Security protocols on page 146.
DHCP/BOOTP/RARP
1
By using the DHCP/BOOTP/RARP protocols, the IP address can be automatically configured.
Note
To use the DHCP/BOOTP/RARP protocols, please contact your network administrator.
APIPA
1
If you do not assign an IP address manually (using the control panel of the machine or the BRAdmin
applications) or automatically (using a DHCP/BOOTP/RARP server), the Automatic Private IP Addressing
(APIPA) protocol will automatically assign an IP address from the range 169.254.1.0 to 169.254.254.255.
ARP
1
Address Resolution Protocol performs mapping of an IP address to MAC address in a TCP/IP network.
DNS client
1
The Brother print server supports the Domain Name System (DNS) client function. This function allows the
print server to communicate with other devices by using its DNS name.
NetBIOS name resolution
1
Network Basic Input/Output System name resolution enables you to obtain the IP address of the other device
using its NetBIOS name during the network connection.
7
Introduction
WINS
1
1
Windows Internet Name Service is an information providing service for the NetBIOS name resolution by
consolidating an IP address and a NetBIOS name that is in the local network.
LPR/LPD
1
Commonly used printing protocols on a TCP/IP network.
SMTP client
1
Simple Mail Transfer Protocol (SMTP) client is used to send E-mails via the Internet or Intranet.
Custom Raw Port (default is Port9100)
1
Another commonly used printing protocol on a TCP/IP network. It enables interactive data transmission.
IPP
1
The Internet Printing Protocol (IPP Version 1.0) allows you to print documents directly to any accessible
printer via the internet.
Note
For the IPPS protocol, see Security protocols on page 146.
mDNS
1
mDNS allows the Brother print server to automatically configure itself to work in a Mac OS X Simple Network
Configured system. (Mac OS X 10.3.9 or greater).
Telnet
1
The Brother print server supports Telnet server for command line configuration.
SNMP
1
The Simple Network Management Protocol (SNMP) is used to manage network devices including computers,
routers and Brother network ready machines. The Brother print server supports SNMPv1, SNMPv2c and
SNMPv3.
Note
For the SNMPv3 protocol, see Security protocols on page 146.
LLMNR
1
The Link-Local Multicast Name Resolution protocol (LLMNR) resolves the names of neighboring computers,
if the network does not have a Domain Name System (DNS) server. The LLMNR Responder function works
in both the IPv4 or IPv6 environment when using a computer that has the LLMNR Sender function such as
Windows Vista®.
8
Introduction
Web services
1
1
The Web Services protocol enables Windows Vista® users to install the Brother printer driver by right-clicking
the machine icon from the Network folder.
See Installation when using Web Services (For Windows Vista® users) on page 192.
The Web Services also let you check the current status of the machine from your computer.
Web server (HTTP)
1
The Brother print server is equipped with a built in web server that allows you to monitor its status or change
some of its configuration settings using a web browser.
Note
• We recommend Microsoft® Internet Explorer® 6.0 (or greater) or Firefox 1.0 (or greater) for Windows®
and Safari 1.3 (or greater) for Macintosh. Please also make sure that JavaScript and Cookies are always
enabled in whichever browser you use. If a different web browser is used, make sure it is compatible with
HTTP 1.0 and HTTP 1.1.
• For the HTTPS protocol, see Security protocols on page 146.
IPv6
1
This machine is compatible with the IPv6, the next generation internet protocol. For more information on the
IPv6 protocol, visit http://solutions.brother.com/.
Other Protocol
1
LLTD
1
The Link Layer Topology Discovery protocol (LLTD) lets you locate the Brother machine easily on the
Windows Vista® Network Map. Your Brother machine will be shown with a distinctive icon and the node
name. The default setting for this protocol is Off. You can activate LLTD using the BRAdmin Professional 3
utility software. Visit the download page for your model at http://solutions.brother.com/ to download BRAdmin
Professional 3.
9
Configuring your machine for a network2
2
Configuring your machine for a network
2
Overview
2
2
Before using your Brother machine in a network environment, you must install the Brother software and also
configure the appropriate TCP/IP network settings on the machine itself. In this chapter, you will learn the
basic steps required to print over the network using TCP/IP protocol.
We recommend that you use the Brother installer on the Brother CD-ROM to install the Brother software as
this will guide you through the software and network installation. Please follow the instructions in the supplied
Quick Setup Guide.
Note
If you do not wish to, or are unable to use the automatic installer or any of Brother’s software tools, you can
also use the machine’s control panel to change network settings.
For more information, see Network menu on page 108.
IP addresses, subnet masks and gateways
2
To use the machine in a networked TCP/IP environment, you need to configure its IP address and subnet
mask. The IP address you assign to the print server must be on the same logical network as your host
computers. If it is not, you must properly configure the subnet mask and the gateway address.
IP address
2
An IP address is a series of numbers that identifies each device connected to a network. An IP address
consists of four numbers separated by dots. Each number is between 0 and 255.
„ Example: In a small network, you would normally change the final number.
• 192.168.1.1
• 192.168.1.2
• 192.168.1.3
How the IP address is assigned to your print server:
2
If you have a DHCP/BOOTP/RARP server in your network (typically UNIX®, Linux or Windows ® 2000/XP,
Windows Vista® or Windows Server® 2003/2008 network) the print server will automatically obtain its IP
address from that server.
Note
On smaller networks, the DHCP server may also be the Router.
For more information on DHCP, BOOTP and RARP, see:Using DHCP to configure the IP address on page 185
10
Configuring your machine for a network
Using BOOTP to configure the IP address on page 186
Using RARP to configure the IP address on page 187.
If you do not have a DHCP/BOOTP/RARP server, the Automatic Private IP Addressing (APIPA) protocol will
automatically assign an IP address from the range 169.254.1.0 to 169.254.254.255. For more information on
APIPA, see Using APIPA to configure the IP address on page 187.
2
If the APIPA protocol is disabled, the default IP address of a Brother print server is 192.0.0.192. However,
you can easily change this IP address number to match with the IP address details of your network. For
information on how to change the IP address, see Setting the IP address and subnet mask on page 13.
Subnet mask
2
Subnet masks restrict network communication.
„ Example: Computer 1 can talk to Computer 2
• Computer 1
IP Address: 192.168. 1. 2
Subnet Mask: 255.255.255.000
• Computer 2
IP Address: 192.168. 1. 3
Subnet Mask: 255.255.255.000
Where the 0 is in the Subnet mask, there is no limit to communication at this part of the address. What this
means in the above example is, we can communicate with any device that has an IP address that begins with
192.168.1.x. (where x.x. are numbers between 0 and 255).
Gateway (and router)
2
A gateway is a network point that acts as an entrance to another network and sends data transmitted via the
network to an exact destination. The router knows where to direct data that arrives at the gateway. If a
destination is located at an external network, the router transmits data to the external network. If your network
communicates with other networks, you may need to configure the Gateway IP address. If you do not know
the Gateway IP address then contact your Network Administrator.
11
Configuring your machine for a network
Step by step chart
a
Configure the TCP/IP settings.
o Configure the IP address
o Configure the subnet mask
o Configure the gateway
b
2
i
i
i
See page 13
See page 13
See page 13
i
i
i
See page 16
See page 16
See page 17
i
i
See page 17
See page 17
2
Change the print server settings.
o Using the BRAdmin Light utility
o Using the BRAdmin Professional 3 utility
o Using the Web Based Management (web
browser)
o Using the control panel
o Using other methods
12
Configuring your machine for a network
Setting the IP address and subnet mask
2
Using the BRAdmin Light utility to configure your machine as a network printer
BRAdmin Light
2
2
The BRAdmin Light utility is designed for initial setup of the Brother network connected devices. It also can
search for Brother products in a TCP/IP environment, view the status and configure basic network settings,
such as IP address. The BRAdmin Light utility is available for Windows® 2000/XP, Windows Vista®, Windows
Server® 2003/2008 and Mac OS X 10.3.9 or greater.
How to configure your machine using the BRAdmin Light utility
2
Note
• Please use the BRAdmin Light utility that was supplied on the CD-ROM of your Brother product. You can
also download the latest Brother BRAdmin Light utility from http://solutions.brother.com/.
• If you require more advanced printer management, use the latest BRAdmin Professional 3 utility that is
available as a download from http://solutions.brother.com/. This utility is only available for Windows®
users.
• If you are using a firewall function of anti-spyware or antivirus applications, temporarily disable them.
Once you are sure that you can print, configure the software settings following the instructions.
• Node name: Node name appears in the current BRAdmin Light window. The default node name of the
print server in the machine is “BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a
wireless network. (“xxxxxxxxxxxx” is your machine’s MAC Address / Ethernet Address.)
• The default password for Brother print servers is “access”.
a
Start the BRAdmin Light utility.
„ For Windows® 2000/XP, Windows Vista® and Windows Server® 2003/2008
Click Start / All Programs 1 / Brother / BRAdmin Light / BRAdmin Light.
1
Programs for Windows® 2000 users
„ For Mac OS X 10.3.9 or greater
Double-click Macintosh HD (Startup Disk) / Library / Printers / Brother / Utilities / BRAdmin
Light.jar file.
b
BRAdmin Light will search for new devices automatically.
13
2
Configuring your machine for a network
c
Double-click the unconfigured device.
Windows®
Macintosh
2
Note
• If the print server is set to its factory default settings (if you don’t use a DHCP/BOOTP/RARP server), the
device will appear as Unconfigured in the BRAdmin Light utility screen.
• You can find the node name and MAC Address (Ethernet Address) by printing out the Network
Configuration page.
See Printing the Network Configuration page on page 123.
d
Choose STATIC from Boot Method. Enter the IP Address, Subnet Mask and Gateway (if needed) of
your print server.
Windows®
e
f
Macintosh
Click OK.
With the correctly programmed IP address, you will see the Brother print server in the device list.
14
Configuring your machine for a network
Using the control panel to configure your machine for a network
2
You can configure your machine for a network using the control panel Network menu.
See Network menu on page 108.
Using other methods to configure your machine for a network
2
2
You can configure your machine for a network using other methods.
See Other ways to set the IP address (For advanced users and administrators) on page 185.
15
Configuring your machine for a network
Changing the print server settings
2
Note
For wireless network users, you need to configure the wireless settings to change the print server settings.
See Configuring your machine for a wireless network (For HL-3070CW) in Chapter 3.
Using the BRAdmin Light utility to change the print server settings
a
2
Start the BRAdmin Light utility.
„ For Windows® 2000/XP, Windows Vista® and Windows Server® 2003/2008
Click Start/All Programs 1/Brother/BRAdmin Light/BRAdmin Light.
1
Programs for Windows® 2000 users
„ For Mac OS X 10.3.9 or greater
Double-click Macintosh HD (Startup Disk) / Library / Printers / Brother / Utilities / BRAdmin
Light.jar file.
b
c
d
e
Choose the print server which you want to change the settings.
Choose Network Configuration from the Control menu.
Enter a password. The default password is “access”.
You can now change the print server settings.
Note
If you want to change more advanced settings, use the BRAdmin Professional 3 utility that is available as
a download from http://solutions.brother.com/. (For Windows® only)
Using the BRAdmin Professional 3 utility to change the print server settings
(For Windows®)
2
Note
• Please use the latest version of the BRAdmin Professional 3 utility that is available as a download from
http://solutions.brother.com/. This utility is only available for Windows ® users.
• If you are using a firewall function of anti-spyware or antivirus applications, temporarily disable them.
Once you are sure that you can print, configure the software settings following the instructions.
• Node Name: Node name appears in the current BRAdmin Professional 3 window. The default node
name of the print server in the machine is “BRNxxxxxxxxxxxx” for a wired network or
“BRWxxxxxxxxxxxx” for a wireless network. (“xxxxxxxxxxxx” is your machine’s MAC Address / Ethernet
Address.)
16
2
Configuring your machine for a network
a
Start the BRAdmin Professional 3 utility (from Windows ® 2000/XP, Windows Vista® or Windows Server®
2003/2008), by clicking Start/All Programs 1/Brother Administrator Utilities/Brother BRAdmin
Professional 3/BRAdmin Professional 3.
1
b
c
d
e
Programs for Windows® 2000 users
2
Choose the print server which you want to configure.
Choose Configure Device from the Control menu.
Enter a password if you have set one. The default password is “access”.
You can now change the print server settings.
Note
• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the
device will appear as APIPA in the BRAdmin Professional 3 utility screen.
• You can find the node name and MAC Address / Ethernet Address (IP Address above) by printing out
the Network Configuration page.
See Printing the Network Configuration page on page 123.
Using Web Based Management (web browser) to change the print server
settings
2
A standard web browser can be used to change your print server settings using the HTTP (Hyper Text
Transfer Protocol).
See How to configure the print server settings using Web Based Management (web browser) on page 131.
Using the control panel to change the print server settings
2
You can configure and change the print server settings using the control panel Network menu.
See Network menu on page 108.
Using other methods to change print server settings
2
You can configure your network printer using other methods.
See Other ways to set the IP address (For advanced users and administrators) on page 185.
17
Configuring your machine for a wireless network (For HL-3070CW) 3
3
Configuring your machine for a wireless
network (For HL-3070CW)
3
Overview
3
To connect your printer to your wireless network, you need to follow the steps in the Quick Setup Guide or
the Network User’s Guide. We recommend that you use the Brother installer application on the CD-ROM
which we have provided with the printer. By using this application, you can easily connect your machine to
your wireless network and install the network software and printer driver which you need to complete the
configuration of your machine for a wireless network. You will be guided by the on-screen instructions until
you are able to use your Brother wireless network machine.
If you want to configure your printer without using the Brother installer application, please read this chapter
for more details on how to configure the wireless network settings. For information on TCP/IP settings, see
Setting the IP address and subnet mask on page 13. For Wireless configuration using the
SecureEasySetup™, Wi-Fi Protected Setup or AOSS™ from the control panel menu, see Chapter 6. For
Wireless configuration using the PIN Method of Wi-Fi Protected Setup, see Chapter 7.
Note
• To achieve optimum results with normal every day document printing, place the Brother machine as
close to the network access point/router as possible with minimal obstructions. Large objects and walls
between the two devices as well as interference from other electronic devices can affect the data transfer
speed of your documents.
Due to these factors, wireless may not be the best method of connection for all types of documents and
applications. If you are printing large files, such as multi-page documents with mixed text and large
graphics, you may want to consider choosing wired Ethernet for a faster data transfer, or USB for the
fastest throughput speed.
• Although the Brother machine can be used in both a wired and wireless network, only one connection
method can be used at a time.
18
3
Configuring your machine for a wireless network (For HL-3070CW)
Wireless network terms and concepts
3
If you want to use your machine in a wireless network you must configure the machine to match the
settings of the existing wireless network. This section provides some of the main terms and concepts of
these settings, which may be helpful when you configure your machine for a wireless network.
SSID (Service Set Identifier) and channels
3
You need to configure the SSID and a channel to specify the wireless network you want to connect to.
SSID
3
Each wireless network has its own unique network name and it is technically referred to as SSID or ESSID
(Extended Service Set Identifier). The SSID is a 32-byte or less value and is assigned to the access point.
The wireless network devices you want to associate to the wireless network should match the access point.
The access point and wireless network devices regularly send wireless packets (referred to as a beacon)
which has the SSID information. When your wireless network device receives a beacon, you can identify the
wireless network that is close enough for the radio waves to reach your device.
Channels
3
Wireless networks use channels. Each wireless channel is on a different frequency. There are up to 14
different channels that can be used when using a wireless network. However, in many countries the number
of channels available are restricted. For more information, see Wireless network (for HL-3070CW) on
page 194.
Authentication and encryption
3
Most wireless networks use some kind of security settings. These security settings define the authentication
(how the device identifies itself to the network) and encryption (how the data is encrypted as it is sent on the
network). If you do not correctly specify these options when you are configuring your Brother wireless
device, it will not be able to connect to the wireless network. Therefore care must be taken when
configuring these options. Please refer to the information below to see which authentication and encryption
methods your Brother wireless device supports.
Authentication methods
3
The Brother machine supports the following methods:
„ Open System
Wireless devices are allowed to access the network without any authentication.
„ Shared Key
A secret pre-determined key is shared by all devices that will access the wireless network. The Brother
machine uses the WEP keys as the pre-determined key.
19
3
Configuring your machine for a wireless network (For HL-3070CW)
„ WPA-PSK/WPA2-PSK
Enables a Wi-Fi Protected Access Pre-shared Key (WPA-PSK/WPA2-PSK), which enables the Brother
wireless machine to associate with access points using TKIP for WPA-PSK or AES for WPA-PSK and
WPA2-PSK encryption (WPA-Personal).
„ LEAP
Cisco LEAP (Light Extensible Authentication Protocol) has been developed by Cisco Systems, Inc. which
uses a user ID and password for authentication.
3
„ EAP-FAST
EAP-FAST (Extensible Authentication Protocol - Flexible Authentication via Secured Tunnel) has been
developed by Cisco Systems, Inc. which uses a user ID and password for authentication, and symmetric
key algorithms to achieve a tunneled authentication process.
The Brother machine supports the following inner authentications:
• EAP-FAST/NONE
EAP-FAST authentication for CCXv3 networks. Does not use an inner authentication method.
• EAP-FAST/MS-CHAPv2
EAP-FAST authentication for CCXv4 networks. Uses MS-CHAPv2 for the inner authentication method.
• EAP-FAST/GTC
EAP-FAST authentication for CCXv4 networks. Uses GTC for the inner authentication method.
Encryption methods
3
Encryption is used to secure the data that is sent over the wireless network. The Brother machine supports
the following encryption methods:
„ None
No encryption method is used.
„ WEP
By using WEP (Wired Equivalent Privacy), the data is transmitted and received with a secure key.
„ TKIP
TKIP (Temporal Key Integrity Protocol) provides per-packet key mixing a message integrity check and
rekeying mechanism.
„ AES
AES (Advanced Encryption Standard) is Wi-Fi® authorized strong encryption standard.
„ CKIP
The original Key Integrity Protocol for LEAP by Cisco Systems, Inc.
20
Configuring your machine for a wireless network (For HL-3070CW)
Network Key
3
There are some rules for each security method:
„ Open System/Shared Key with WEP
This key is a 64-bit or 128-bit value that must be entered in an ASCII or hexadecimal format.
• 64 (40) bit ASCII:
3
Uses 5 text characters. e.g. “WSLAN” (this is case sensitive)
• 64 (40) bit hexadecimal:
Uses 10 digits of hexadecimal data. e.g. “71f2234aba”
• 128 (104) bit ASCII:
Uses 13 text characters. e.g. “Wirelesscomms” (this is case sensitive)
• 128 (104) bit hexadecimal:
Uses 26 digits of hexadecimal data. e.g. “71f2234ab56cd709e5412aa2ba”
„ WPA-PSK/WPA2-PSK and TKIP or AES
Uses a Pre-Shared Key (PSK) that is 8 or more characters in length, up to a maximum of 63 characters.
„ LEAP
Uses User ID and Password.
• User ID: less than 64 characters in length.
• Password: less than 32 characters in length.
„ EAP-FAST
Uses User ID and Password.
• User ID: less than 64 characters in length.
• Password: less than 32 characters in length.
21
Configuring your machine for a wireless network (For HL-3070CW)
Step by step chart for wireless network configuration
3
For Infrastructure mode
a
3
Confirm your network environment. (See page 24.)
o Infrastructure mode
o Ad-hoc mode
Connected to a computer with an access point
b
Connected to a wireless capable computer without
an access point
Confirm your wireless network setup method. (See page 25.)
Using the Brother
installer application
(Recommended)
Temporarily using a
network cable
c
or
3
See page 23.
Using the
SES/WPS/AOSS
control panel menu
Using the
SES/WPS/AOSS control
panel menu
(if your wireless access
point supports either
SecureEasySetup™,
Wi-Fi Protected Setup
or AOSS™)
Using the PIN Method of
Wi-Fi Protected Setup
(if your wireless access
point supports Wi-Fi
Protected Setup)
Configure your machine for a wireless network. (See page 28.)
Configuring your machine for a wireless network
(For Windows®)
(For Windows®)
See page 29.
See page 40.
(For Macintosh)
(For Macintosh)
See page 60.
See page 70.
See page 88.
See page 98.
Installing the printer driver
(For Windows®)
(For Windows®)
(For Windows®) See page 57.
See page 91.
See page 100.
(For Macintosh) See page 86.
(For Macintosh)
(For Macintosh)
See page 95.
See page 104.
Wireless configuration and installing printer driver have been completed.
22
Configuring your machine for a wireless network (For HL-3070CW)
For Ad-hoc mode
a
3
Confirm your network environment. (See page 24.)
o Ad-hoc mode
o Infrastructure mode
Connected to a wireless capable computer without
an access point
b
or
See page 22
3
Connected to a computer with an access point
You need to configure the wireless network settings by using the Brother installer application.
Using the Brother installer application (Recommended)
c
Configure your machine for a wireless network. (See page 28.)
Configuring your machine for a wireless network
(For Windows®) See page 46.
(For Macintosh) See page 76.
Installing the printer driver
(For Windows®) See page 57.
(For Macintosh) See page 86.
Wireless configuration and installing printer driver have been completed.
23
Configuring your machine for a wireless network (For HL-3070CW)
Confirm your network environment
3
Connected to a computer with an access point in the network (Infrastructure
mode)
3
3
1
4
2
3
1) Access point
2) Wireless network printer (your machine)
3) Wireless capable computer connected to the access point
4) Wired computer which is not wireless capable connected to the access point with an Ethernet
cable
Connected to a wireless capable computer without an access point in the
network (Ad-hoc mode)
3
This type of network does not have a central access point. Each wireless client communicates directly with
each other. When the Brother wireless machine (your machine) is part of this network, it receives all print jobs
directly from the computer sending the print data.
2
1
2
1) Wireless network printer (your machine)
2) Wireless capable computer
Note
We do not guarantee the wireless network connection with Windows Server® products in Ad-hoc mode.
24
Configuring your machine for a wireless network (For HL-3070CW)
Confirm your wireless network setup method
3
There are three methods to configure your wireless network machine. Use the Brother installer application
on the CD-ROM (recommended). Use the one-push wireless setting mode or use the PIN Method of Wi-Fi
Protected Setup. The setup process will be different depending on your network environment.
Note
3
If you configure the wireless network settings in Ad-hoc mode, use the Brother installer application on the
CD-ROM we have provided with the machine.
Configuration using the Brother installer application on the CD-ROM to
configure your machine for a wireless network (Recommended)
3
We recommend that you use the Brother installer application on the CD-ROM we have provided with the
machine. By using this application, you can easily connect your machine to your wireless network and install
the network software and printer driver which you need to complete the configuration of your machine for a
wireless network. You will be guided by the on-screen instructions until you are able to use your Brother
wireless network machine. You must know your wireless network settings before you proceed with this
installation.
Configuration temporarily using a network cable
3
You need to temporarily use an Ethernet cable when you configure your Brother printer in this method. The
Ethernet cable is not a standard accessory.
If there is an Ethernet Hub or Router in the same network as the wireless access point (A) of your machine,
you can temporarily connect the Hub or Router to the machine using an Ethernet cable (B), this is an easy
way to configure the machine. You can then remotely configure the machine from a computer on the network.
A
B
25
Configuring your machine for a wireless network (For HL-3070CW)
Configuration using SES/WPS or AOSS from the control panel menu to
configure your machine for a wireless network (Infrastructure mode only)
3
If your wireless access point (A) supports either SecureEasySetup™, Wi-Fi Protected Setup (PBC 1) or
AOSS™, you can configure the machine without a computer.
3
A
1
Push Button Configuration
26
Configuring your machine for a wireless network (For HL-3070CW)
Configuration using the PIN Method of Wi-Fi Protected Setup to configure your
machine for a wireless network (Infrastructure mode only)
3
If your wireless access point (A) supports Wi-Fi Protected Setup, you can also configure using the PIN
Method of Wi-Fi Protected Setup. (See Wireless configuration using the PIN Method of Wi-Fi Protected Setup
(For HL-3070CW) in Chapter 7.)
3
„ Connection when the wireless access point (router) (A) doubles as a Registrar 1.
A
„ Connection when another device (C), such as a computer is used as a Registrar 1.
A
C
1
The Registrar is a device that manages the wireless LAN.
27
Configuring your machine for a wireless network (For HL-3070CW)
Configure your machine for a wireless network
3
Using the Brother installer application on the CD-ROM to configure your
machine for a wireless network (Recommended)
3
For installation, see Wireless configuration for Windows® using the Brother automatic installer application
(For HL-3070CW) in Chapter 4 or Wireless Configuration for Macintosh using the Brother installer application
(For HL-3070CW) in Chapter 5.
Using SES/WPS or AOSS from the control panel menu to configure your
machine for a wireless network
3
3
For installation, see Wireless configuration using SES/WPS or AOSS from the control panel (For HL3070CW) in Chapter 6.
Using the PIN Method of Wi-Fi Protected Setup to configure your machine for a
wireless network
3
For installation, see Wireless configuration using the PIN Method of Wi-Fi Protected Setup (For HL3070CW) in Chapter 7.
28
Wireless configuration for Windows®
using the Brother automatic installer
application (For HL-3070CW)
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)4
4
4
Configuration in Infrastructure mode
4
Before configuring the wireless settings
4
4
IMPORTANT
The following instructions will install your Brother machine in a network environment using the Brother
installer application for Windows® found on the CD-ROM we have provided with the machine.
You must know your wireless network settings before you proceed with this installation. Make sure
you take notes on all the current settings such as SSID, authentication and encryption of your wireless
network environment. If you do not know them, contact your network administrator or the manufacturer of
your access point/router.
Item
Example
Communication mode: (Infrastructure)
Infrastructure
Network name: (SSID, ESSID)
HELLO
Authentication method:
WPA2-PSK
Record the current wireless network settings
(Open System, Shared key, WPA-PSK 1,
WPA2-PSK 1, LEAP, EAP-FAST)
Encryption mode:
AES
(None, WEP, TKIP, AES, CKIP)
Network key: (Encryption key, WEP key 2,
Passphrase)
12345678
1
WPA/WPA2-PSK is a Wi-Fi Protected Access Pre-Shared Key, which lets the Brother wireless machine associate with access points using
TKIP or AES encryption (WPA-Personal). WPA-PSK(TKIP or AES) and WPA2-PSK(AES) use a Pre-Shared Key (PSK) that is 8 or more
characters in length, up to a maximum of 63 characters.
2
The WEP key is for 64-bit encrypted networks or 128-bit encrypted networks and can contain both numbers and letters. If you do not know this
information you should see the documentation provided with your access point or wireless router. This key is a 64-bit or 128-bit value that must
be entered in an ASCII or HEXADECIMAL format.
For example:
64-bit ASCII:
64-bit Hexadecimal:
128-bit ASCII:
128-bit Hexadecimal:
Uses 5 text characters e.g. “Hello” (this is case sensitive)
Uses 10 digits of hexadecimal data e.g. “71f2234aba”
Uses 13 text characters e.g. “Wirelesscomms” (this is case sensitive)
Uses 26 digits of hexadecimal data e.g.
“71f2234ab56cd709e5412aa3ba”
If you have previously configured the wireless settings of the printer, you must reset the print server back
to its factory default settings (see Reset the network settings to the factory default on page 122).
29
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
If you are using Windows ® Firewall or a firewall function of anti-spyware or antivirus applications,
temporarily disable them. Once you are sure that you can print, configure the software settings following
the instructions.
You need to temporarily use an Ethernet cable during configuration.
4
30
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
Configure the wireless settings
a
b
c
Make sure that the power cord is plugged in.
d
Put the supplied CD-ROM into your CD-ROM drive. The opening screen will appear automatically.
Choose your printer model and the language.
e
Click Install Printer Driver on the menu screen.
4
Turn on the machine and wait until the machine is in the Ready state.
Turn on your computer. (You must be logged on with Administrator rights.)
Close any applications running before configuration.
4
Note
Choose the Install Printer Driver icon for your region.
f
Click Wireless Network users.
31
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
Note
For Windows Vista®, when the User Account Control screen appears, click Allow.
4
g
Choose Wireless Setup and Driver Install (Recommended) or Wireless Setup Only, and then click
Next.
h
Choose Step by Step install (Recommended) and then click Next.
32
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
i
Choose With cable (Recommended) and then click Next.
4
j
Connect the Brother wireless device to your access point using a network cable and click Next.
33
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
k
Choose the machine you wish to configure, and click Next. If the list is blank, check if the access point
and the machine are powered on, and then click Refresh.
4
Note
• The default node name is “BRNxxxxxxxxxxxx”.
• You can find your printer’s MAC Address (Ethernet Address) and the IP Address by printing out the
Network Configuration page. See Printing the Network Configuration page on page 123.
l
The wizard will search for wireless networks available from your machine. Choose the access point you
wish to associate the machine with, and then click Next.
Note
• “SETUP” is the default SSID of the machine. Do not choose this SSID.
• If the list is blank, check that the access point has power and is broadcasting the SSID, and then see if
the machine and the access point are within range for wireless communication. Then, click Refresh.
34
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
• If your access point is set to not broadcast the SSID you can manually add it by clicking the Add button.
Follow the on-screen instructions for entering the Name(SSID) and then click Next.
4
m
If your network is not configured for Authentication and Encryption, the following screen will appear. To
continue configuration, click OK and go to o.
35
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
n
If your network is configured for Authentication and Encryption, the following screen will appear. When
configuring your Brother wireless machine, you must configure your machine to match the
Authentication and Encryption settings you wrote down on page 29 for your existing wireless
network. Choose the Authentication Method and Encryption Mode from the pull-down menu in each
setting box. Then enter the Network Key and Confirm Network Key, and then click Next.
4
Note
• If you want to setup or configure additional WEP key indexes other than WEP key1, click Advanced.
• If you do not know the Authentication or Encryption settings for your network, contact your network
administrator or the manufacturer of your access point/router.
• If you are using WEP and the printed Network Configuration page in o shows Link OK in the Wireless
Link Status, but the machine is not found on your network, make sure you entered the WEP key
correctly. The WEP key is case sensitive.
36
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
o
Click Next. The settings will be sent to your machine. The settings will remain unchanged if you click
Cancel. The Network Configuration page will be printed.
4
Note
• If you want to manually enter the IP address settings of your machine, click Change IP Address and
enter the necessary IP address settings for your network.
• The control panel settings will be automatically changed to WLAN Enable when the wireless settings
are sent to your machine.
37
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
p
Check the printed Network Configuration page. Choose the status as it is shown for the Wireless Link
Status on the Network Configuration page. Click Next.
If your status is "Link OK.", go to r.
If your status is "Failed To Associate", go to q.
4
q
Click Finish. Wireless setup was unable to associate with a wireless network. This is probably due to
incorrect security settings. Reset the print server back to its factory default settings (see Reset the
network settings to the factory default on page 122). Confirm the security settings of your wireless
network and try starting from f again.
38
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
r
Disconnect the network cable between your access point (hub or router) and the machine, and click Next
or Finish.
4
You have completed the wireless setup. If you chose to install the printer driver in step g, Go
to Installing the printer driver on page 57.
39
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
Configuration in Infrastructure mode using SES/WPS or
AOSS from the control panel menu (without network cable)
4
If your wireless access point/router supports either SecureEasySetup™, Wi-Fi Protected Setup (PBC 1) or
AOSS™, you can configure the machine easily without knowing your wireless network settings. Your Brother
machine has the SES/WPS/AOSS menu on the control panel. This feature automatically detects which mode
your access point uses, SecureEasySetup™, Wi-Fi Protected Setup or AOSS™. By pushing a button on the
wireless access point/router, you can setup the wireless network and security settings. See the user’s guide
for your wireless access point/router for instructions on how to access one-push mode.
1
4
Push Button Configuration
Note
Routers or access points that support SecureEasySetup™, Wi-Fi Protected Setup or AOSS™ have the
symbols shown below.
Before configuring the wireless settings
4
IMPORTANT
The following instructions will install your Brother machine in a network environment using the Brother
installer application for Windows® found on the CD-ROM we have provided with the machine.
If you are going to connect your Brother machine to your network, we recommend that you contact your
system administrator prior to installation.
If you have previously configured the wireless settings of the printer, you must reset the print server back
to its factory default settings (see Reset the network settings to the factory default on page 122).
If you are using Windows ® Firewall or a firewall function of anti-spyware or antivirus applications,
temporarily disable them. Once you are sure that you can print, configure the software settings following
the instructions.
40
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
Configure the wireless settings
a
b
c
Make sure that the power cord is plugged in.
d
Put the supplied CD-ROM into your CD-ROM drive. The opening screen will appear automatically.
Choose your printer model and the language.
e
Click Install Printer Driver on the menu screen.
4
Turn on the machine and wait until the machine is in the Ready state.
Turn on your computer. (You must be logged on with Administrator rights.)
Close any applications running before configuration.
4
Note
Choose the Install Printer Driver icon for your region.
f
Click Wireless Network users.
41
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
Note
For Windows Vista®, when the User Account Control screen appears, click Allow.
4
g
Choose Wireless Setup and Driver Install (Recommended) or Wireless Setup Only, and then click
Next.
h
Choose Automatic install (Advanced) and click Next.
42
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
i
Confirm the on-screen message and click Next.
4
j
k
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
Press + or - to choose Network.
Press OK.
l
Press + or - to choose WLAN.
Press OK.
m
Press + or - to choose SES/WPS/AOSS.
Press OK.
Note
If your wireless access point supports Wi-Fi Protected Setup (PIN Method) and you want to configure your
machine using the PIN (Personal Identification Number) Method, see Wireless configuration using the PIN
Method of Wi-Fi Protected Setup (For HL-3070CW) in Chapter 7.
n
The machine will search for an access point that supports SecureEasySetup™, Wi-Fi Protected Setup
or AOSS™ for 2 minutes.
o
Put your access point in the SecureEasySetup™ mode, the Wi-Fi Protected Setup mode or the AOSS™
mode, depending on what is supported by your access point. Please refer to the instruction manual that
came with your access point.
43
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
p
If the LCD shows Connected, the machine has successfully connected to your access point/router. You
can now use your machine in a wireless network.
If the LCD shows Connection Error, a session overlap has been detected. The machine has
detected more than one access point/router on your network with the SecureEasySetup™ mode, the
Wi-Fi Protected Setup mode or AOSS™ mode enabled. Make sure that only one access point/router has
the SecureEasySetup™ mode, the Wi-Fi Protected Setup mode or the AOSS™ mode enabled and try
starting from j again.
If the LCD shows No Access Point, the machine has not detected your access point/router on your
network with the SecureEasySetup™ mode, the Wi-Fi Protected Setup mode or AOSS™ mode enabled.
Move the machine closer to your access point/router and try starting from j again.
If the LCD shows Connection Fail, the machine has not successfully connected to your access
point/router. Try starting from j again. If the same message is indicated again, reset the print server
back to its factory default settings and try again. (For resetting, see Reset the network settings to the
factory default on page 122.)
LCD messages when using the SES/WPS/AOSS control panel menu
LCD shows
Setting WLAN
Connecting SES
Connection status
Action
Searching or accessing the access point,
and downloading settings from the access
point
-
Connecting the access point
-
Connecting WPS
Connecting AOSS
Connected
Connection succeeded.
-
Connection Error
Session overlap has been detected.
Check that only one router or access
point has the SecureEasySetup™
mode, the Wi-Fi Protected Setup mode
or AOSS™ mode enabled and try
starting from j again.
No Access Point
The access point detection failed.
1 Move the machine closer to your
access point/router and try starting
from step j again.
2 If the same message continues,
reset the print server back to its
factory default settings and try
again.
Connection Fail
Connection failed.
1 Try starting from j again.
2 If the same message continues,
reset the print server back to its
factory default settings and try
again.
44
4
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
q
Click Next or Finish.
4
You have completed the wireless setup. If you chose to install the printer driver in step g, Go
to the next step.
r
Check the box after you confirm that you have completed the wireless settings, and then click Next. Go
to Installing the printer driver on page 57.
45
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
Configuration in Ad-hoc mode
4
Before configuring the wireless settings
4
IMPORTANT
The following instructions will install your Brother machine in a network environment using the Brother
installer application for Windows® found on the CD-ROM we have provided with the machine.
4
You must know your wireless network settings before you proceed with this installation. Make sure
you take notes on all the current settings such as the SSID, authentication and encryption of your wireless
network environment. If you do not know them, contact your network administrator.
Item
Example
Communication mode: (Ad-hoc)
Ad-hoc
Network name: (SSID, ESSID)
HELLO
Authentication method:
Open System
Record the current wireless network settings
(Open System)
Encryption mode:
WEP
(None, WEP)
Network key: (Encryption key, WEP key 1,
Passphrase)
1
12345
The WEP key is for 64-bit encrypted networks or 128-bit encrypted networks and can contain both numbers and letters. If you do not know this
information you should see the documentation provided with your access point or wireless router. This key is a 64-bit or 128-bit value that must
be entered in an ASCII or HEXADECIMAL format.
For example:
64-bit ASCII:
64-bit Hexadecimal:
128-bit ASCII:
128-bit Hexadecimal:
Uses 5 text characters e.g. “Hello” (this is case sensitive)
Uses 10 digits of hexadecimal data e.g. “71f2234aba”
Uses 13 text characters e.g. “Wirelesscomms” (this is case sensitive)
Uses 26 digits of hexadecimal data e.g.
“71f2234ab56cd709e5412aa3ba”
If you have previously configured the wireless settings of the printer, you must reset the print server back
to its factory default settings (see Reset the network settings to the factory default on page 122).
If you are using Windows ® Firewall or a firewall function of anti-spyware or antivirus applications,
temporarily disable them. Once you are sure that you can print, configure the software settings following
the instructions.
46
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
Configure the wireless settings
a
b
c
4
Make sure that the power cord is plugged in.
Turn on the machine and wait until the machine is in the Ready state.
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
Press + or - to choose Network, press OK.
Press + or - to choose WLAN, press OK.
Press + or - to choose WLAN Enable, press OK.
Choose On.
d
Turn on your computer. (You must be logged on with Administrator rights.)
Close any applications running before configuration.
e
Put the supplied CD-ROM into your CD-ROM drive. The opening screen will appear automatically.
Choose your printer model and the language.
f
Click Install Printer Driver on the menu screen.
4
Note
Choose the Install Printer Driver icon for your region.
47
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
g
Click Wireless Network users.
4
Note
For Windows Vista®, when the User Account Control screen appears, click Allow.
h
Choose Wireless Setup and Driver Install (Recommended) or Wireless Setup Only, and then click
Next.
48
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
i
Choose Step by Step install (Recommended) and then click Next.
4
j
Choose Without cable (Advanced) and then click Next.
k
Read the Important Notice to enable the wireless interface. Check the box after you confirm the
wireless setting is enabled, and then click Next.
49
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
l
You need to temporarily change your computer’s wireless settings. Follow the on-screen instructions.
Make sure you take notes on all the settings such as SSID, channel, authentication and encryption of
your computer. (See your note on page 46.) You will need them to return your computer back to its
original wireless settings, and then click Next.
4
m
To communicate with the un-configured wireless machine, temporarily change the wireless settings on
your computer to match the machine’s default settings shown on this screen. Check the box after you
confirm these settings, and then click Next.
50
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
Note
„ If a message to restart your computer appears after the wireless settings have been changed, restart
your computer and then go back to step e and continue with the install skipping steps l and m.
„ For Windows Vista® users:
You can temporarily change the wireless settings on your computer, following the steps below:
1)
2)
3)
4)
5)
6)
7)
Click the
button and then Control Panel.
Click Network and Internet and then the Network and Sharing Center icon.
Click Connect to a network.
You can see the SSID of the wireless printer in the list. Choose SETUP and click Connect.
Click Connect Anyway and then Close.
Click View status of Wireless Network Connection (SETUP).
Click Details.... and check the Network Connection Details. It may take a few minutes to change
from 0.0.0.0 to 169.254.x.x IP address to be shown on screen (where x.x. are numbers between 1
and 254).
„ For Windows ® XP SP2 users:
You can temporarily change the wireless settings on your computer, following the steps below:
1) Click the Start button and then Control Panel.
2) Click the Network and Internet Connections icon.
3) Click the Network Connections icon.
4) Choose and right-click Wireless Network Connection. Click View Available Wireless Networks.
5) You can see the SSID of the wireless printer in the list. Choose SETUP and click Connect.
6) Check the Wireless Network Connection status. It may take a few minutes to change from 0.0.0.0
to 169.254.x.x IP address to be shown on screen (where x.x. are numbers between 1 and 254).
n
Choose the machine you wish to configure, and click Next. If the list is blank, check if the machine is
powered on, and then click Refresh.
Note
• The default node name is “BRWxxxxxxxxxxxx”.
• You can find your printer’s MAC Address (Ethernet Address) and the IP Address by printing out the
Network Configuration page. See Printing the Network Configuration page on page 123.
51
4
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
o
The wizard will search for wireless networks available from your machine. Choose the Ad-hoc network
you wish to associate the machine with, and then click Next.
4
Note
• If the list is blank, check if the machine is within range for wireless communication. Then, click Refresh.
• If your target Ad-hoc network does not appear on the list, you can manually add it by clicking the Add
button. Check This is an Ad-hoc network and there is no access point., and then enter the Name
(SSID) and the Channel number, and then click Next.
p
If your network is not configured for Authentication and Encryption, the following screen will appear. To
continue configuration, click OK and go to r.
52
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
q
If your network is configured for Authentication and Encryption, the following screen will appear. When
configuring your Brother wireless machine, you must ensure that it is configured to match the
Authentication and Encryption settings you wrote down on page 46 for your existing wireless
network. Choose the Authentication Method and Encryption Mode from the pull-down list in each
setting box. Then enter the Network Key and Confirm Network Key, and then click Next.
4
Note
• If you want to setup or configure an additional WEP key indexes other than WEP key1, click Advanced.
• If you do not know the Authentication or Encryption settings for your network, contact your network
administrator.
• If you are using WEP and the printed Network Configuration page in r shows Link OK in the Wireless
Link Status, but the machine is not found on your network, make sure you entered the WEP key
correctly. The WEP key is case sensitive.
53
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
r
Click Next. The settings will be sent to your machine. The settings will remain unchanged if you click
Cancel. The Network Configuration page will be printed.
4
Note
If you want to manually enter the IP address settings of your machine, click Change IP Address and enter
the necessary IP address settings for your network.
54
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
s
Check the printed Network Configuration page. Choose the status as it is shown for the Wireless Link
Status on the Network Configuration page. Click Next.
If your status is "Link OK.", go to u.
If your status is "Failed To Associate", go to t.
4
t
Click Finish. Wireless setup was unable to associate with a wireless network. This is probably due to
incorrect security settings. Confirm the security settings of your wireless network and try starting from g
again.
55
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
u
To communicate with the configured wireless device, you must configure your computer to use the same
wireless settings. Manually change the wireless settings on your computer to match the machine's
wireless settings shown on this screen. Check the box after you confirm these settings, and then click
Next or Finish.
(The settings shown on this screen are for example only. Your settings will not be the same.)
4
You have completed the wireless setup. If you chose to install the printer driver in step h, Go
to Installing the printer driver on page 57.
56
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
Installing the printer driver
4
IMPORTANT
• DO NOT try to cancel any of the screens during this installation.
• If your wireless settings fail, an error message will appear during the installation of the printer driver and
the installation will be terminated. If you encounter this failure, please go back to step 1 and setup the
wireless connection again.
4
a
The driver installation starts. When the License Agreement window appears, click Yes if you agree to
the License Agreement.
b
Choose Standard Installation, and then click Next.
57
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
c
Choose Search the network for devices and choose from a list of discovered devices
(Recommended). Or enter your printer's IP address or its node name. Click Next.
4
Note
You can find your printer’s IP address and the node name by printing out the Network Configuration page.
See Printing the Network Configuration page on page 123.
d
Choose your printer, and then click Next.
Note
If your printer takes a long time to appear on the list, 1 minute or more, then click Refresh. If your printer
still fails to appear, reset the print server back to its factory default settings (see Reset the network settings
to the factory default on page 122) and try the wireless setup again.
58
Wireless configuration for Windows® using the Brother automatic installer application (For HL-3070CW)
e
Click Finish.
4
Note
• If you want to register your product on-line, check On-Line Registration.
• If you do not want to set your printer as Default printer, uncheck Set as Default Printer.
• If you want to disable the Status Monitor, uncheck Enable Status Monitor.
• If you disable your Personal Firewall software (e.g. Windows® Firewall), turn it back on.
Setup is now complete.
59
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW) 5
5
Wireless Configuration for Macintosh
using the Brother installer application
(For HL-3070CW)
5
Configuration in Infrastructure mode
5
Before configuring the wireless settings
5
IMPORTANT
5
The following instructions will install your Brother machine in a network environment using the Brother
installer application for Macintosh found on the CD-ROM we have provided with the machine.
You must know your wireless network settings before you proceed with this installation. Make sure
you take notes on all the current settings such as the SSID, authentication and encryption of your wireless
network environment. If you do not know them, contact your network administrator or the manufacturer of
your access point/router.
Item
Example
Communication mode: (Infrastructure)
Infrastructure
Network name: (SSID, ESSID)
HELLO
Authentication method:
WPA2-PSK
Record the current wireless network settings
(Open System, Shared key, WPA-PSK 1,
WPA2-PSK 1, LEAP, EAP-FAST)
Encryption mode:
AES
(None, WEP, TKIP, AES, CKIP)
Network key: (Encryption key, WEP key 2,
Passphrase)
12345678
1
WPA/WPA2-PSK is a Wi-Fi Protected Access Pre-Shared Key, which lets the Brother wireless machine associate with access points using
TKIP or AES encryption (WPA-Personal). WPA-PSK(TKIP or AES) and WPA2-PSK(AES) use a Pre-Shared Key (PSK) that is 8 or more
characters in length, up to a maximum of 63 characters.
2
The WEP key is for 64-bit encrypted networks or 128-bit encrypted networks and can contain both numbers and letters. If you do not know this
information you should see the documentation provided with your access point or wireless router. This key is a 64-bit or 128-bit value that must
be entered in an ASCII or HEXADECIMAL format.
For example:
64-bit ASCII:
64-bit Hexadecimal:
128-bit ASCII:
128-bit Hexadecimal:
Uses 5 text characters e.g. “Hello” (this is case sensitive)
Uses 10 digits of hexadecimal data e.g. “71f2234aba”
Uses 13 text characters e.g. “Wirelesscomms” (this is case sensitive)
Uses 26 digits of hexadecimal data e.g.
“71f2234ab56cd709e5412aa3ba”
If you have previously configured the wireless settings of the printer, you must reset the print server back
to its factory default settings (see Reset the network settings to the factory default on page 122).
60
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
If you are using a firewall function of anti-spyware or antivirus applications, temporarily disable them. Once
you are sure that you can print, configure the software settings following the instructions.
You need to temporarily use an Ethernet cable during configuration.
5
61
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
Configure the wireless settings
a
b
c
d
Make sure that the power cord is plugged in.
e
Click Install Printer Driver on the menu screen.
5
Turn on the machine and wait until the machine is in the Ready state.
Turn on your Macintosh.
Put the supplied CD-ROM into your CD-ROM drive. Double-click the HL3000 icon on your desktop.
Double-click the Start Here icon. Choose your printer model and the language.
5
f
Click Wireless Network users.
62
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
g
Choose Wireless Setup and Driver Install (Recommended) or Wireless Setup Only, and then click
Next.
5
h
Choose Step by Step install (Recommended) and then click Next.
i
Choose With cable (Recommended) and then click Next.
63
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
j
Connect the Brother wireless device to your access point using a network cable and click Next.
5
k
Choose the machine you wish to configure, and click Next. If the list is blank, check if the access point
and the machine are powered on, and then click Refresh.
Note
• The default node name is “BRNxxxxxxxxxxxx”.
• You can find your printer’s MAC Address (Ethernet Address) and the IP Address by printing out the
Network Configuration page. See Printing the Network Configuration page on page 123.
64
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
l
The wizard will search for wireless networks available from your machine. Choose the access point you
wish to associate the machine with, and then click Next.
5
Note
• “SETUP” is the default SSID of the machine. Do not choose this SSID.
• If the list is blank, check that the access point has power and is broadcasting the SSID, and then see if
the machine and the access point are within range for wireless communication. Then, click Refresh.
• If your access point is set to not broadcast the SSID you can manually add it by clicking the Add button.
Follow the on-screen instructions for entering the Name (SSID) and then click Next.
65
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
m
If your network is not configured for Authentication and Encryption, the following screen will appear. To
continue configuration, click OK and go to o.
n
If your network is configured for Authentication and Encryption, the following screen will appear. When
configuring your Brother wireless machine, you must configure your machine to match the
Authentication and Encryption settings you wrote down on page 60 for your existing wireless
network. Choose the Authentication Method and Encryption Mode from the pop-up menu in each
setting box. Then enter the Network Key and Confirm Network Key, and then click Next.
Note
• If you want to setup or configure an additional WEP key indexes other than WEP key1, click Advanced.
• If you do not know the Authentication or Encryption settings for your network, contact your network
administrator or the manufacturer of your access point/router.
• If you are using WEP and the printed Network Configuration page in o shows Link OK in the Wireless
Link Status, but the machine is not found on your network, make sure you entered the WEP key
correctly. The WEP key is case sensitive.
66
5
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
o
Click Next. The settings will be sent to your machine. The settings will remain unchanged if you click
Cancel. The Network Configuration page will be printed.
5
Note
• If you want to manually enter the IP address settings of your machine, click Change IP Address and
enter the necessary IP address settings for your network.
• The control panel settings will be automatically changed to WLAN Enable when the wireless settings
are sent to your machine.
67
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
p
Check the printed Network Configuration page. Choose the status as it is shown for the Wireless Link
Status on the Network Configuration page. Click Next.
If your status is "Link OK.", go to r.
If your status is "Failed To Associate", go to q.
5
q
Click Finish. Wireless setup was unable to associate with a wireless network. This is probably due to
incorrect security settings. Reset the print server back to its factory default settings (see Reset the
network settings to the factory default on page 122). Confirm the security settings of your wireless
network and try starting from f again.
68
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
r
Disconnect the network cable between your access point (hub or router) and the machine, and click Next
or Finish.
5
You have completed the wireless setup. If you chose to install the printer driver in step g, Go
to Installing the printer driver on page 86.
69
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
Configuration in Infrastructure mode using SES/WPS or
AOSS from the control panel menu (without network cable)
5
If your wireless access point/router supports either SecureEasySetup™, Wi-Fi Protected Setup (PBC 1) or
AOSS™, you can configure the machine easily without knowing your wireless network settings. Your Brother
machine has the SES/WPS/AOSS menu on the control panel. This feature automatically detects which mode
your access point uses, SecureEasySetup™, Wi-Fi Protected Setup or AOSS™. By pushing a button on the
wireless access point/router, you can setup the wireless network and security settings. See the user’s guide
for your wireless access point/router for instructions on how to access one-push mode.
1
Push Button Configuration
5
Note
Routers or access points that support SecureEasySetup™, Wi-Fi Protected Setup or AOSS™ have the
symbols shown below.
Before configuring the wireless settings
5
IMPORTANT
The following instructions will install your Brother machine in a network environment using the Brother
installer application for Macintosh found on the CD-ROM we have provided with the machine.
If you are going to connect your Brother machine to your network, we recommend that you contact your
system administrator prior to installation.
If you have previously configured the wireless settings of the printer, you must reset the print server back
to its factory default settings. (see Reset the network settings to the factory default on page 122).
If you are using a firewall function of anti-spyware or antivirus applications, temporarily disable them. Once
you are sure that you can print, configure the software settings following the instructions.
70
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
Configure the wireless settings
a
b
c
d
Make sure that the power cord is plugged in.
e
Click Install Printer Driver on the menu screen.
5
Turn on the machine and wait until the machine is in the Ready state.
Turn on your Macintosh.
Put the supplied CD-ROM into your CD-ROM drive. Double-click the HL3000 icon on your desktop.
Double-click the Start Here icon. Choose your printer model and the language.
5
f
Click Wireless Network users.
71
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
g
Choose Wireless Setup and Driver Install (Recommended) or Wireless Setup Only, and then click
Next.
5
h
Choose Automatic install (Advanced) and click Next.
i
Confirm the on-screen message and click Next.
j
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
72
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
k
Press + or - to choose Network.
Press OK.
l
Press + or - to choose WLAN.
Press OK.
m
Press + or - to choose SES/WPS/AOSS.
Press OK.
n
The machine will search for an access point that supports SecureEasySetup™, Wi-Fi Protected Setup
or AOSS™ for 2 minutes.
o
Put your access point in the SecureEasySetup™ mode, Wi-Fi Protected Setup mode or AOSS™ mode,
depending on what is supported by your access point. Please refer to the instruction manual that came
with your access point.
73
5
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
p
If the LCD shows Connected, the machine has successfully connected to your access point/router. You
can now use your machine in a wireless network.
If the LCD shows Connection Error, a session overlap has been detected. The machine has
detected more than one access point/router on your network with the SecureEasySetup™ mode, the
Wi-Fi Protected Setup mode or AOSS™ mode enabled. Make sure that only one access point/router has
the SecureEasySetup™ mode, the Wi-Fi Protected Setup mode or the AOSS™ mode enabled and try
starting from j again.
If the LCD shows No Access Point, the machine has not detected your access point/router on your
network with the SecureEasySetup™ mode, the Wi-Fi Protected Setup mode or AOSS™ mode enabled.
Move the machine closer to your access point/router and try starting from j again.
If the LCD shows Connection Fail, the machine has not successfully connected to your access
point/router. Try starting from j again. If the same message is indicated again, reset the print server
back to its factory default settings and try again. (For resetting, see Reset the network settings to the
factory default on page 122.)
LCD messages when using the SES/WPS/AOSS control panel menu
LCD shows
Setting WLAN
Connecting SES
Connection status
Action
Searching or accessing the access point,
and downloading settings from the access
point
-
Connecting the access point
-
Connecting WPS
Connecting AOSS
Connected
Connection succeeded.
-
Connection Error
Session overlap has been detected.
Check that only one router or access
point has the SecureEasySetup™
mode, the Wi-Fi Protected Setup mode
or AOSS™ mode enabled and try
starting from j again.
No Access Point
The access point detection failed.
1 Move the machine closer to your
access point/router and try starting
from step j again.
2 If the same message continues,
reset the print server back to its
factory default settings and try
again.
Connection Fail
Connection failed.
1 Try starting from j again.
2 If the same message continues,
reset the print server back to its
factory default settings and try
again.
74
5
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
q
Click Next or Finish.
5
You have completed the wireless setup. If you chose to install the printer driver in step g, Go
to the next step.
r
Check the box after you confirm that you have completed the wireless settings, and then click Next. Go
to Installing the printer driver on page 86.
75
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
Configuration in Ad-hoc mode
5
Before configuring the wireless settings
5
IMPORTANT
The following instructions will install your Brother machine in a network environment using the Brother
installer application for Macintosh found on the CD-ROM we have provided with the machine.
You must know your wireless network settings before you proceed with this installation. Make sure
you take notes on all the current settings such as the SSID, authentication and encryption of your wireless
network environment. If you do not know them, contact your network administrator.
Item
Example
Communication mode: (Ad-hoc)
Ad-hoc
Network name: (SSID, ESSID)
HELLO
Authentication method:
Open System
Record the current wireless network settings
(Open System)
Encryption mode:
WEP
(None, WEP)
Network key: (Encryption key, WEP key 1,
Passphrase)
1
12345
The WEP key is for 64-bit encrypted networks or 128-bit encrypted networks and can contain both numbers and letters. If you do not know this
information you should see the documentation provided with your access point or wireless router. This key is a 64-bit or 128-bit value that must
be entered in an ASCII or HEXADECIMAL format.
For example:
64-bit ASCII:
64-bit Hexadecimal:
128-bit ASCII:
128-bit Hexadecimal:
Uses 5 text characters e.g. “Hello” (this is case sensitive)
Uses 10 digits of hexadecimal data e.g. “71f2234aba”
Uses 13 text characters e.g. “Wirelesscomms” (this is case sensitive)
Uses 26 digits of hexadecimal data e.g.
“71f2234ab56cd709e5412aa3ba”
If you have previously configured the wireless settings of the printer, you must reset the print server back
to its factory default settings. (see Reset the network settings to the factory default on page 122).
If you are using a firewall function of anti-spyware or antivirus applications, temporarily disable them. Once
you are sure that you can print, configure the software settings following the instructions.
76
5
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
Configure the wireless settings
a
b
c
5
Make sure that the power cord is plugged in.
Turn on the machine and wait until the machine is in the Ready state.
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
Press + or - to choose Network, press OK.
Press + or - to choose WLAN, press OK.
Press + or - to choose WLAN Enable, press OK.
Choose On.
d
e
Turn on your Macintosh.
f
Click Install Printer Driver on the menu screen.
g
Click Wireless Network users.
5
Put the supplied CD-ROM into your CD-ROM drive. Double-click the HL3000 icon on your desktop.
Double-click the Start Here icon. Choose your printer model and the language.
77
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
h
Choose Wireless Setup and Driver Install (Recommended) or Wireless Setup Only, and then click
Next.
5
i
Choose Step by Step install (Recommended) and then click Next.
j
Choose Without cable (Advanced) and then click Next.
78
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
k
Read the Important Notice to enable the wireless interface. Check the box after you confirm the
wireless setting is enabled, and then click Next.
5
l
You need to temporarily change your computer’s wireless settings. Follow the on-screen instructions.
Make sure you take notes on all the settings such as the SSID, channel, authentication and encryption
of your computer.(See your note on page 76.) You will need them to return your computer back to its
original wireless settings, and then click Next.
79
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
m
To communicate with the un-configured wireless machine, temporarily change the wireless settings on
your computer to match the machine’s default settings shown on this screen. Check the box after you
confirm these settings, and then click Next.
5
Note
You can temporarily change the wireless settings on your computer, following the steps below:
1) Click the AirPort status icon and choose Open Internet Connect....
2) Click the Network tab to see the available wireless devices. You can see the Brother wireless print
server in the Network option. Choose SETUP.
3) Your wireless network is connected successfully.
n
Choose the machine you wish to configure, and click Next. If the list is blank, check if the machine is
powered on, and then click Refresh.
Note
• The default node name is “BRWxxxxxxxxxxxx”.
• You can find your printer’s MAC Address (Ethernet Address) and the IP Address by printing out the
Network Configuration page. See Printing the Network Configuration page on page 123.
80
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
o
The wizard will search for wireless networks available from your machine. Choose the Ad-hoc network
you wish to associate the machine with, and then click Next.
5
Note
• If the list is blank, check if the machine is within range for wireless communication. Then, click Refresh.
• If your target Ad-hoc network does not appear on the list, you can manually add it by clicking the Add
button. Check This is an Ad-hoc network and there is no access point., and then enter the Name
(SSID) and the Channel number, and then click Next.
p
If your network is not configured for Authentication and Encryption, the following screen will appear. To
continue configuration, click OK and go to r.
81
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
q
If your network is configured for Authentication and Encryption, the following screen will appear. When
configuring your Brother wireless machine, you must ensure that it is configured to match the
Authentication and Encryption settings you wrote down on page 76 for your existing wireless
network. Choose the Authentication Method and Encryption Mode from the pop-up menu in each
setting box. Then enter the Network Key and Confirm Network Key, and then click Next.
5
Note
• If you want to setup or configure an additional WEP key indexes other than WEP key1, click Advanced.
• If you do not know the Authentication or Encryption settings for your network, contact your network
administrator.
• If you are using WEP and the printed Network Configuration page in r shows Link OK in the Wireless
Link Status, but the machine is not found on your network, make sure you entered the WEP key
correctly. The WEP key is case sensitive.
82
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
r
Click Next. The settings will be sent to your machine. The settings will remain unchanged if you click
Cancel. The Network Configuration page will be printed.
5
Note
If you want to manually enter the IP address settings of your machine, click Change IP Address and enter
the necessary IP address settings for your network.
83
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
s
Check the printed Network Configuration page. Choose the status as it is shown for the Wireless Link
Status on the Network Configuration page. Click Next.
If your status is "Link OK.", go to u.
If your status is "Failed To Associate", go to t.
5
t
Click Finish. Wireless setup was unable to associate with a wireless network. This is probably due to
incorrect security settings. Confirm the security settings of your wireless network and try starting from g
again.
84
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
u
To communicate with the configured wireless device, you must configure your computer to use the same
wireless settings. Manually change the wireless settings on your computer to match the machine's
wireless settings shown on this screen. Check the box after you confirm these settings, and then click
Next or Finish.
(The settings shown on this screen are for example only. Your settings will not be the same.)
5
You have completed the wireless setup. If you chose to install the printer driver in step h, Go
to Installing the printer driver on page 86.
85
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
Installing the printer driver
5
IMPORTANT
• DO NOT try to cancel any of the screens during this installation.
• If your wireless settings fail, an error message will appear during the installation of the printer driver and
the installation will be terminated. If you encounter this failure, please go back to step 1 and setup the
wireless connection again.
a
The driver installation starts.
Follow the on-screen instructions. Then, restart your Macintosh.
5
b
The Brother software will search for the Brother printer. During this time the following screen will appear.
c
Choose the printer you wish to connect, and then click OK.
Note
• If there is more than one of the same printer model connected on your network, the MAC Address
(Ethernet Address) will be displayed after the model name. You can also confirm your IP Address by
scrolling to the right.
• You can find your printer’s MAC Address (Ethernet Address) and the IP Address by printing out the
Network Configuration page.
See Printing the Network Configuration page on page 123.
• If your printer fails to appear on the list, reset the print server back to its factory default settings (see
Reset the network settings to the factory default on page 122) and try the wireless setup again.
86
Wireless Configuration for Macintosh using the Brother installer application (For HL-3070CW)
d
When this screen appears, click OK.
Setup is now complete.
5
87
Wireless c onfiguration using SES/WPS or AOSS from
(For
the
HL-3070CW)
control panel
6
6
Wireless configuration using SES/WPS or
AOSS from the control panel
(For HL-3070CW)
Overview
6
6
If your wireless access point/router supports either SecureEasySetup™, Wi-Fi Protected Setup (PBC 1) or
AOSS™, you can configure the machine easily without knowing your wireless network settings. Your Brother
machine has the SES/WPS/AOSS menu on the control panel. This feature automatically detects which mode
your access point uses, SecureEasySetup™, Wi-Fi Protected Setup or AOSS™. By pushing a button on the
wireless access point/router, you can setup the wireless network and security settings. See the user’s guide
for your wireless access point/router for instructions on how to access one-push mode.
1
Push Button Configuration
6
Note
Routers or access points that support SecureEasySetup™, Wi-Fi Protected Setup or AOSS™ have the
symbols shown below.
88
Wireless configuration using SES/WPS or AOSS from the control panel (For HL-3070CW)
How to configure your wireless machine, using SES/WPS or
AOSS from the control panel menu
6
IMPORTANT
If you are going to connect your Brother machine to your network, we recommend that you contact your
system administrator prior to installation.
If you are using Windows ® Firewall or a firewall function of anti-spyware or antivirus applications,
temporarily disable them. Once you are sure that you can print, configure the software settings following
the instructions.
If you have previously configured the wireless settings of the printer, you must reset the print server back
to its factory default settings (see Reset the network settings to the factory default on page 122).
a
b
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
Press + or - to choose Network.
Press OK.
c
Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose SES/WPS/AOSS.
Press OK.
Note
If your wireless access point supports Wi-Fi Protected Setup (PIN Method) and you want to configure your
machine using the PIN (Personal Identification Number) Method, see How to configure your wireless
machine, using the PIN Method of Wi-Fi Protected Setup on page 98.
e
The machine searches for an access point that supports SecureEasySetup™, Wi-Fi Protected Setup or
AOSS™ for 2 minutes.
f
Put your access point in the SecureEasySetup™ mode, Wi-Fi Protected Setup mode or AOSS™ mode,
depending on what is supported by your access point. Please refer to the instruction manual that came
with your access point.
89
6
Wireless configuration using SES/WPS or AOSS from the control panel (For HL-3070CW)
g
If the LCD shows Connected, the machine has successfully connected to your access point/router. You
can now use your machine in a wireless network.
If the LCD shows Connection Error, a session overlap has been detected. The machine has
detected more than one access point/router on your network with the SecureEasySetup™ mode, the
Wi-Fi Protected Setup mode or AOSS™ mode enabled. Make sure that only one access point/router has
the SecureEasySetup™ mode, the Wi-Fi Protected Setup mode or the AOSS™ mode enabled and try
starting from a again.
If the LCD shows No Access Point, the machine has not detected your access point/router on your
network with the SecureEasySetup™ mode, the Wi-Fi Protected Setup mode or AOSS™ mode enabled.
Move the machine closer to your access point/router and try starting from a again.
If the LCD shows Connection Fail, the machine has not successfully connected to your access
point/router. Try starting from a again. If the same message is indicated again, reset the print server
back to its factory default settings and try again. (For resetting, see Reset the network settings to the
factory default on page 122.)
6
LCD messages when using the SES/WPS/AOSS control panel menu
LCD shows
Setting WLAN
Connecting SES
Connection status
Action
Searching or accessing the access point,
and downloading settings from the access
point
-
Connecting the access point
-
Connecting WPS
Connecting AOSS
Connected
Connection succeeded.
-
Connection Error
Session overlap has been detected.
Check that only one router or access
point has the SecureEasySetup™
mode, the Wi-Fi Protected Setup mode
or AOSS™ mode enabled and try
starting from a again.
No Access Point
The access point detection failed.
1 Move the machine closer to your
access point/router and try starting
from step a again.
2 If the same message continues,
reset the print server back to its
factory default settings and try
again.
Connection Fail
Connection failed.
1 Try starting from a again.
2 If the same message continues,
reset the print server back to its
factory default settings and try
again.
90
Wireless configuration using SES/WPS or AOSS from the control panel (For HL-3070CW)
For Windows® users
6
IMPORTANT
DO NOT try to cancel any of the screens during this installation.
a
Turn on your computer. (You must be logged on with Administrator rights.)
Close any applications running before configuration.
b
Put the supplied CD-ROM into your CD-ROM drive. The opening screen will appear automatically.
Choose your printer model and the language.
c
Click Install Printer Driver on the menu screen.
6
Note
Choose the Install Printer Driver icon for your region.
d
Click Wireless Network users.
91
Wireless configuration using SES/WPS or AOSS from the control panel (For HL-3070CW)
Note
For Windows Vista®, when the User Account Control screen appears, click Allow.
6
e
Choose Driver Install Only, and then click Next.
f
When the License Agreement window appears, click Yes if you agree to the License Agreement.
92
Wireless configuration using SES/WPS or AOSS from the control panel (For HL-3070CW)
g
Choose Standard Installation, and then click Next.
h
Choose Search the network for devices and choose from a list of discovered devices
(Recommended). Or enter your printer's IP address or its node name. Click Next.
6
Note
You can find your printer’s IP address and the node name by printing out the Network Configuration page.
See Printing the Network Configuration page on page 123.
93
Wireless configuration using SES/WPS or AOSS from the control panel (For HL-3070CW)
i
Choose your printer, and then click Next.
6
Note
If your printer takes a long time to appear on the list, 1 minute or more, then click Refresh.
j
Click Finish.
Note
• If you want to register your product on-line, check On-Line Registration.
• If you do not want to set your printer as Default printer, uncheck Set as Default Printer.
• If you want to disable the Status Monitor, uncheck Enable Status Monitor.
• If you disable the Personal Firewall software (e.g. Windows ® Firewall), turn it back on.
Setup is now complete.
94
Wireless configuration using SES/WPS or AOSS from the control panel (For HL-3070CW)
For Macintosh users
6
IMPORTANT
DO NOT try to cancel any of the screens during this installation.
a
b
Turn on your Macintosh.
c
Click Install Printer Driver on the menu screen.
Put the supplied CD-ROM into your CD-ROM drive. Double-click the HL3000 icon on your desktop.
Double-click the Start Here icon. Choose your printer model and the language.
6
d
Click Wireless Network users.
95
Wireless configuration using SES/WPS or AOSS from the control panel (For HL-3070CW)
e
Choose Driver Install Only, and then click Next. Follow the on-screen instructions. Then, restart your
Macintosh.
6
f
The Brother software will search for the Brother printer. During this time the following screen will appear.
g
Choose the printer you wish to connect, and then click OK.
Note
• If there is more than one of the same printer model connected on your network, the MAC Address
(Ethernet Address) will be displayed after the model name. You can also confirm your IP Address by
scrolling to the right.
• You can find your printer’s MAC Address (Ethernet Address) and the IP Address by printing out the
Network Configuration page. See Printing the Network Configuration page on page 123.
96
Wireless configuration using SES/WPS or AOSS from the control panel (For HL-3070CW)
h
When this screen appears, click OK.
Setup is now complete.
6
97
Wireless configuration using the PIN Method of Wi-Fi
(ForProtected
HL-3070CW)
Setup
7
7
Wireless configuration using the PIN
Method of Wi-Fi Protected Setup
(For HL-3070CW)
7
Overview
7
If your wireless access point/router supports Wi-Fi Protected Setup (PIN Method), you can configure the
machine easily. The PIN (Personal Identification Number) Method is one of the connection methods
developed by the Wi-Fi Alliance®. By inputting a PIN which is created by an Enrollee (your machine) to the
Registrar (a device that manages the wireless LAN), you can setup the wireless network and security
settings. See the user’s guide for your wireless access point/router for instructions on how to access the
Wi-Fi Protected Setup mode.
Note
Routers or access points that support Wi-Fi Protected Setup have a symbol as shown below.
7
How to configure your wireless machine, using the PIN
Method of Wi-Fi Protected Setup
7
IMPORTANT
If you are going to connect the Brother machine to your network, we recommend that you contact your
system administrator prior to installation.
a
b
c
d
Make sure that the power cord is plugged in.
Turn on the machine and wait until the machine is in the Ready state.
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
Press + or - to choose Network.
Press OK.
e
Press + or - to choose WLAN.
Press OK.
f
Press + or - to choose WPS w/PIN Code.
Press OK.
g
The LCD will show an 8 digit PIN and the machine starts searching for an access point for 5 minutes.
98
Wireless configuration using the PIN Method of Wi-Fi Protected Setup (For HL-3070CW)
h
Using a computer that is on the network, type “http://access point’s IP address/” into your browser.
(Where “access point’s IP address” is the IP address of the device that is used as the Registrar 1.) Go to
the WPS (Wi-Fi Protected Setup) setting page and input the PIN which the LCD shows in g to the
Registrar and follow the on-screen instruction.
1
The Registrar is normally the access point/router.
Note
The setting page is different, depending on the brand of access point/router. See the instruction manual that
came with your access point/router.
If you are using your Windows Vista® computer as a Registrar, follow the instructions below.
Note
To use a Windows Vista® computer as a Registrar, you need to register it to your network in advance. See
the instruction manual that came with your access point/router.
1
2
3
4
5
6
i
7
Click the
button and then Network.
Click Add a wireless device.
Choose your machine and click Next.
Input the PIN from the printed page and then click Next.
Choose your network that you want to connect to, and then click Next.
Click Close.
If the LCD shows Connected, the machine has successfully connected to your access point/router. You
can now use your machine in a wireless network.
If the LCD shows Connection Fail, the machine has not successfully connected to your access
point/router, or the entered PIN code is invalid. Make sure you enter the correct PIN code, and try starting
from f again. If the same message is indicated again, reset the print server back to its factory default
settings and try again. For resetting, see Reset the network settings to the factory default on page 122.
If the LCD shows No Access Point, the machine has detected no access point/router on your
network. Make sure you place the Brother machine as close to the network access point/router as
possible with minimal obstructions, and try starting from f again. If the same message is indicated
again, reset the print server back to its factory default settings and try again. For resetting, see Reset the
network settings to the factory default on page 122.
You have completed the wireless setup. To install the printer driver, Go to step a on page 100
for Windows® or page 104 for Macintosh.
99
Wireless configuration using the PIN Method of Wi-Fi Protected Setup (For HL-3070CW)
For Windows® users
7
IMPORTANT
DO NOT try to cancel any of the screens during this installation.
a
Turn on your computer. (You must be logged on with Administrator rights.)
Close any applications running before configuration.
b
Put the supplied CD-ROM into your CD-ROM drive. The opening screen will appear automatically.
Choose your printer model and the language.
c
Click Install Printer Driver on the menu screen.
7
Note
Choose the Install Printer Driver icon for your region.
d
Click Wireless Network users.
100
Wireless configuration using the PIN Method of Wi-Fi Protected Setup (For HL-3070CW)
Note
For Windows Vista®, when the User Account Control screen appears, click Allow.
e
Choose Driver Install Only, and then click Next.
f
When the License Agreement window appears, click Yes if you agree to the License Agreement.
7
101
Wireless configuration using the PIN Method of Wi-Fi Protected Setup (For HL-3070CW)
g
Choose Standard Installation, and then click Next.
h
Choose Search the network for devices and choose from a list of discovered devices
(Recommended). Or enter your printer's IP address or its node name. Click Next.
7
Note
You can find your printer’s IP address and the node name by printing out the Network Configuration page.
See Printing the Network Configuration page on page 123.
102
Wireless configuration using the PIN Method of Wi-Fi Protected Setup (For HL-3070CW)
i
Choose your printer, and then click Next.
Note
If your printer takes a long time to appear on the list, 1 minute or more, then click Refresh.
j
7
Click Finish.
Note
• If you want to register your product on-line, check On-Line Registration.
• If you do not want to set your printer as Default printer, uncheck Set as Default Printer.
• If you want to disable the Status Monitor, uncheck Enable Status Monitor.
Setup is now complete.
103
Wireless configuration using the PIN Method of Wi-Fi Protected Setup (For HL-3070CW)
For Macintosh users
7
IMPORTANT
DO NOT try to cancel any of the screens during this installation.
a
b
Turn on your Macintosh.
c
Click Install Printer Driver on the menu screen.
Put the supplied CD-ROM into your CD-ROM drive. Double-click the HL3000 icon on your desktop.
Double-click the Start Here icon. Choose your printer model and the language.
7
d
Click Wireless Network users.
104
Wireless configuration using the PIN Method of Wi-Fi Protected Setup (For HL-3070CW)
e
Choose Driver Install Only, and then click Next. Follow the on-screen instructions. Then, restart your
Macintosh.
f
The Brother software will search for the Brother printer. During this time the following screen will appear.
g
Choose the printer you wish to connect, and then click OK.
7
Note
• If there is more than one of the same printer model connected on your network, the MAC Address
(Ethernet Address) will be displayed after the model name. You can also confirm your IP Address by
scrolling to the right.
• You can find your printer’s MAC Address (Ethernet Address) and the IP Address by printing out the
Network Configuration page. See Printing the Network Configuration page on page 123.
105
Wireless configuration using the PIN Method of Wi-Fi Protected Setup (For HL-3070CW)
h
When this screen appears, click OK.
Setup is now complete.
7
106
Control panel features8
8
Control panel features
Overview
8
8
This printer has one back lit Liquid Crystal Display (LCD), seven buttons and two Light Emitting Diodes
(LEDs) on the control panel. The LCD is a 16 character single line display.
With the control panel you can do the following:
Change the print server settings using the control panel
8
See Network menu on page 108.
Print the Network Configuration page
See Printing the Network Configuration page on page 123.
Reset the network settings to the factory default
See Reset the network settings to the factory default on page 122.
107
Control panel features
Network menu
8
Before using your Brother product in a network environment, you need to configure the correct TCP/IP
settings.
In this section, you will learn how to configure the network settings using the control panel, located on the
front of the machine.
The Network menu selections of the control panel allow you to set up the Brother machine for your network
configuration. Press any of the Menu buttons (+, -, OK or Back) to display the main menu. Then press + or to choose Network. Proceed to the menu selection you wish to configure. For additional infomation on the
menu see Function table and factory default settings on page 195.
Please note that the machine is supplied with the BRAdmin Light utility and Web Based Management (web
browser), which also can be used to configure many aspects of the network. See Changing the print server
settings on page 16.
TCP/IP
8
This menu has 7 sections: Boot Method, IP Address, Subnet Mask, Gateway, IP Boot Tries, APIPA
and IPv6.
Boot Method
8
8
This selection controls how the machine obtains an IP address. The default setting is Auto.
Note
If you do not want your print server configured via DHCP, BOOTP or RARP, you must set the Boot Method
to Static so that the print server has a static IP address. This will prevent the print server from trying to
obtain an IP address from any of these systems. To change the Boot Method, use the machine’s control
panel, BRAdmin Light utility or Web Based Management (web browser).
a
b
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
Press + or - to choose Network.
Press OK.
c
For HL-3070CW
(For wired) Press + or - to choose Wired LAN.
(For wireless) Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose TCP/IP.
Press OK.
e
Press + or - to choose Boot Method.
Press OK.
108
Control panel features
f
Press + or - to choose Auto 1, Static 2, RARP 3, BOOTP 4 or DHCP 5.
Press OK.
1
Auto mode
In this mode, the machine will scan the network for a DHCP server, if it can find one, and if the DHCP server is configured to allocate an IP address
to the machine, then the IP address supplied by the DHCP server will be used. If no DHCP server is available, then the machine will scan for a
BOOTP server. If a BOOTP server is available, and it is configured correctly, the machine will take its IP address from the BOOTP server. If a
BOOTP server is not available, the machine will scan for a RARP server. If a RARP server also does not answer, the IP Address is scanned
through APIPA facility, see Using APIPA to configure the IP address on page 187. After it is initially powered ON, it may take a few minutes for
the machine to scan the network for a server.
2
Static mode
In this mode the machine’s IP address must be manually assigned. Once entered the IP address is locked to the assigned address.
3
RARP mode
The Brother print server IP address can be configured using the Reverse ARP (RARP) service on your host computer. For more information on
RARP, see Using RARP to configure the IP address on page 187.
4
BOOTP mode
BOOTP is an alternative to RARP that has the advantage of allowing configuration of the subnet mask and gateway. For more information on
BOOTP, see Using BOOTP to configure the IP address on page 186.
5
DHCP mode
Dynamic Host Configuration Protocol (DHCP) is one of several automated mechanisms for IP address allocation. If you have a DHCP server in
your network (typically a UNIX, Windows® 2000/XP, Windows Vista® network) the print server will automatically obtain its IP address from a DHCP
server and register its name with any RFC 1001 and 1002 compliant dynamic name services.
Note
8
• If you do not want your print server configured via DHCP, BOOTP or RARP, you must set the BOOT
Method to static so that the print server has a static IP address. This will prevent the print server from
trying to obtain an IP address from any of these systems. To change the BOOT Method, use the
machine’s control panel Network menu, BRAdmin applications or Web Based Management (web
browser).
• On smaller networks, the DHCP server may be the router.
109
Control panel features
IP Address
8
This field displays the current IP address of the machine. If you have chosen a Boot Method of Static,
enter the IP address that you wish to assign to the machine (check with your network administrator for the IP
address to use). If you have chosen a method other than Static, the machine will attempt to determine its
IP address using the DHCP or BOOTP protocols. The default IP address of your machine will probably be
incompatible with the IP address numbering scheme of your network. We recommend that you contact your
network administrator for an IP address for the network the unit will be connected on.
a
b
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
Press + or - to choose Network.
Press OK.
c
For HL-3070CW
(For wired) Press + or - to choose Wired LAN.
(For wireless) Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose TCP/IP.
Press OK.
e
Press + or - to choose IP Address.
Press OK. The first part of the number will be blinking.
f
Press + or - to increase or decrease the number.
Press OK to go to the next number.
g
h
Repeat this process until you have set your IP address.
8
Press OK to finish the IP address.
An asterisk appears at the end of the LCD.
110
Control panel features
Subnet Mask
8
This field displays the current subnet mask used by the machine. If you are not using DHCP or BOOTP to
obtain the subnet mask, enter the desired subnet mask. Check with your network administrator for the subnet
mask to use.
a
b
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
Press + or - to choose Network.
Press OK.
c
For HL-3070CW
(For wired) Press + or - to choose Wired LAN.
(For wireless) Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose TCP/IP.
Press OK.
e
Press + or - to choose Subnet Mask.
Press OK. The first part of the number will be blinking.
f
Press + or - to increase or decrease the number.
Press OK to go to the next number.
g
h
Repeat this process until you have set your Subnet Mask address.
8
Press OK to finish the Subnet Mask address.
An asterisk appears at the end of the LCD.
111
Control panel features
Gateway
8
This field displays the current gateway or router address used by the machine. If you are not using DHCP or
BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have a
gateway or router, leave this field blank. Check with your network administrator if you are unsure.
a
b
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
Press + or - to choose Network.
Press OK.
c
For HL-3070CW
(For wired) Press + or - to choose Wired LAN.
(For wireless) Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose TCP/IP.
Press OK.
e
Press + or - to choose Gateway.
Press OK. The first part of the number will be blinking.
f
Press + or - to increase or decrease the number.
Press OK to go to the next number.
g
h
Repeat this process until you have set your Gateway address.
8
Press OK to finish the Gateway address.
An asterisk appears at the end of the LCD.
112
Control panel features
IP Boot Tries
8
This field displays how many times the printer attempts to scan the network to obtain the IP address through
the Boot Method you have set (see Boot Method on page 108). The default setting is 3.
a
b
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
Press + or - to choose Network.
Press OK.
c
For HL-3070CW
(For wired) Press + or - to choose Wired LAN.
(For wireless) Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose TCP/IP.
Press OK.
e
Press + or - to choose IP Boot Tries.
Press OK.
f
Press + or - to set the number of times you wish to try to obtain the IP address.
Press OK.
8
113
Control panel features
APIPA
8
The setting of On will cause the print server to automatically allocate a Link-Local IP address in the range
(169.254.1.0 - 169.254.254.255) when the print server cannot obtain an IP address through the Boot Method
you have set (see Boot Method on page 108). Choosing Off means the IP address doesn’t change, when
the print server cannot obtain an IP address through the Boot Method you have set. The default setting for
APIPA is On.
a
b
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
Press + or - to choose Network.
Press OK.
c
For HL-3070CW
(For wired) Press + or - to choose Wired LAN.
(For wireless) Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose TCP/IP.
Press OK.
e
Press + or - to choose APIPA.
Press OK.
f
Press + or - to choose On or Off.
Press OK.
8
114
Control panel features
IPv6
8
This machine is compatible with IPv6, the next generation internet protocol. If you want to use the IPv6
protocol, choose On. The default setting for IPv6 is Off. For more information on the IPv6 protocol, visit
http://solutions.brother.com/.
a
b
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
Press + or - to choose Network.
Press OK.
c
For HL-3070CW
(For wired) Press + or - to choose Wired LAN.
(For wireless) Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose TCP/IP.
Press OK.
e
Press + or - to choose IPv6.
Press OK.
f
Press + or - to choose On or Off.
Press OK.
8
Note
If you set IPv6 to On, turn off the power switch and then turn it back on to enable this protocol.
115
Control panel features
Ethernet (wired network only)
8
Ethernet link mode. Auto allows the print server to operate in 100BASE-TX full or half duplex, or in
10BASE-T full or half duplex mode by auto negotiation.
100 BASE-TX Full Duplex (100B-FD) or Half Duplex (100B-HD) and 10BASE-T Duplex (10B-FD) or Half
Duplex (10B-HD) will fix the print server link mode. This change is valid after the print server has been reset.
The default setting is Auto.
Note
If you incorrectly set this value, you may not be able to communicate with your print server.
a
b
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
Press + or - to choose Network.
Press OK.
c
Press + or - to choose Wired LAN.
Press OK.
d
Press + or - to choose Ethernet.
Press OK.
e
Press + or - to choose Auto, 100B-FD, 100B-HD, 10B-FD or 10B-HD.
Press OK.
Factory Reset
8
8
The Factory Reset allows you to reset the print server back to its factory default settings. For more
information and resetting, see Reset the network settings to the factory default on page 122.
Set to Default (For HL-3070CW)
8
The Set to Default allows you to reset each wired or wireless network setting to the factory default.
a
b
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
Press + or - to choose Network.
Press OK.
c
(For wired) Press + or - to choose Wired LAN.
(For wireless) Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose Set to Default.
Press OK.
e
When OK? appears, press OK again.
116
Control panel features
Wired Enable (For HL-3070CW wired network only)
8
If you want to use the wired network connection, set Wired Enable to On.
a
b
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
Press + or - to choose Network.
Press OK.
c
Press + or - to choose Wired LAN.
Press OK.
d
Press + or - to choose Wired Enable.
Press OK.
e
Press + or - to choose On or Off.
Press OK.
WLAN Enable (For HL-3070CW wireless network only)
8
If you want to use the wireless network connection, set WLAN Enable to On.
a
b
8
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
Press + or - to choose Network.
Press OK.
c
Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose WLAN Enable.
Press OK.
e
Press + or - to choose On.
Press OK.
SES/WPS or AOSS (For HL-3070CW wireless network only)
8
If your wireless access point/router supports either SecureEasySetup™, Wi-Fi Protected Setup (PBC 1) or
AOSS™, you can configure the machine easily without a computer. Your Brother machine has the
SES/WPS/AOSS menu on the control panel. This feature automatically detects which mode your access
point uses, SecureEasySetup™, Wi-Fi Protected Setup or AOSS™. By pushing a button on the wireless
access point/router, you can setup the wireless network and security settings. See the user’s guide for your
wireless access point/router for instructions on how to access one-push mode. (See Wireless configuration
using SES/WPS or AOSS from the control panel (For HL-3070CW) in Chapter 6.)
1
Push Button Configuration
117
Control panel features
WPS w/PIN Code (For HL-3070CW wireless network only)
8
If your wireless access point/router supports Wi-Fi Protected Setup (PIN Method), you can configure the
machine easily. The PIN (Personal Identification Number) Method is one of the connection methods
developed by the Wi-Fi Alliance®. By inputting a PIN which is created by an Enrollee (your machine) to the
Registrar (a device that manages the wireless LAN), you can setup the wireless network and security
settings. See the user’s guide for your wireless access point/router for instructions on how to access the
Wi-Fi Protected Setup mode. (See Wireless configuration using the PIN Method of Wi-Fi Protected Setup
(For HL-3070CW) in Chapter 7.)
WLAN Status (For HL-3070CW wireless network only)
8
Status
8
This field displays the current wireless network status; Active(11b), Active(11g), Wired LAN Active,
WLAN OFF, Connection Fail, or AOSS Active.
a
b
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
Press + or - to choose Network.
Press OK.
c
Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose WLAN Status.
Press OK.
e
Press + or - to choose Status.
Press OK.
f
The current wireless network status will be displayed; Active(11b), Active(11g), Wired LAN
Active, WLAN OFF, Connection Fail, or AOSS Active.
g
Press OK again.
8
118
Control panel features
Signal
8
This field displays the current wireless network status; Strong, Medium, Weak, or None.
a
b
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
Press + or - to choose Network.
Press OK.
c
Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose WLAN Status.
Press OK.
e
Press + or - to choose Signal.
Press OK.
f
g
The current wireless network status will be displayed; Strong, Medium, Weak, or None.
Press OK again.
Channel
8
8
This field displays the current wireless network channel.
a
b
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
Press + or - to choose Network.
Press OK.
c
Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose WLAN Status.
Press OK.
e
Press + or - to choose Channel.
Press OK.
f
g
The current wireless network channel will be displayed.
Press OK again.
119
Control panel features
Speed
8
This field displays the current wireless network speed.
a
b
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
Press + or - to choose Network.
Press OK.
c
Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose WLAN Status.
Press OK.
e
Press + or - to choose Speed.
Press OK.
f
g
The current wireless network speed will be displayed.
Press OK again.
8
SSID
8
This field displays the current wireless network SSID. The display shows up to 32 characters of the SSID
name.
a
b
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
Press + or - to choose Network.
Press OK.
c
Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose WLAN Status.
Press OK.
e
Press + or - to choose SSID.
Press OK.
f
g
The current wireless network SSID will be displayed.
Press OK again.
120
Control panel features
Comm. Mode
8
This field displays the current wireless network communication mode; Ad-hoc or Infrastructure.
a
b
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
Press + or - to choose Network.
Press OK.
c
Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose WLAN Status.
Press OK.
e
Press + or - to choose Comm. Mode.
Press OK.
f
g
The current wireless network communication mode will be displayed; Ad-hoc or Infrastructure.
Press OK again.
8
121
Control panel features
Reset the network settings to the factory default
8
You can reset the print server back to its factory default settings (resetting all information such as the
password and IP address information.)
Note
You can also reset the print server back to its factory default settings using the BRAdmin applications or
Web Based Management (web browser). For more information, see Changing the print server settings on
page 16.
a
b
c
Make sure that the power cord is plugged in.
d
Press + or - to choose Network.
Press OK.
e
Press + or - to choose Factory Reset.
Press OK.
f
When Restart Printer? appears, press OK again. The machine will restart.
Turn on the machine and wait until the machine is in the Ready state.
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine to take the
machine off-line.
8
122
Control panel features
Printing the Network Configuration page
8
Note
Node name: Node name appears on the Network Configuration page. The default node name of the print
server in the machine is “BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless
network (For HL-3070CW).
The Network Configuration page prints a report listing all the current network settings. You can print the
Network Configuration page using the control panel.
a
b
c
Make sure that the power cord is plugged in.
d
Press + or - to choose Machine Info..
Press OK.
e
Press + or - to choose Print NetSetting.
Press OK.
Turn on the machine and wait until the machine is in the Ready state.
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine to take the
machine off-line.
8
Note
If the IP Address on the Network Configuration page shows 0.0.0.0, wait for one minute and try again.
123
®
Driver Deployment
ard
only)
9
(Windows Wiz
9
Driver Deployment Wizard
(Windows® only)
9
Overview
9
The Driver Deployment Wizard software can be used to ease the installation or even automate the installation
of a locally connected or network connected printer. The Driver Deployment Wizard can also be used to
create self running executable files which when run on a remote PC, completely automates the installation of
a printer driver. The remote PC does not have to be connected to a network.
Connection methods
9
The Driver Deployment Wizard supports the three connection methods.
Peer-to-peer
9
The device is connected to the network but each user prints directly to the printer WITHOUT printing through
a central queue.
1
Windows
R
1
Windows
R
1
Windows
R
9
2
TCP/IP
1) Client computer
2) Network printer (your machine)
124
Driver Deployment Wizard (Windows® only)
Network Shared
9
The device is connected to a network and a central print queue is used to manage all print jobs.
1
Windows
R
Windows
R
1
Windows
R
3
TCP/IP
1
Windows
R
4
2
1) Client computer
2) Also known as “Server” or “Print server”
3) TCP/IP or USB
9
4) Printer (your machine)
Local Printer (USB)
9
The device is connected to the computer using an USB cable.
Windows
R
3
1
2
1) Client computer
2) Printer (your machine)
3) USB
125
Driver Deployment Wizard (Windows® only)
How to install the Driver Deployment Wizard software
9
a
Put the supplied CD-ROM into your CD-ROM drive. If the model name screen appears, choose your
machine. If the language screen appears, choose your language.
b
c
The CD-ROM main menu will appear. Click Install Other Drivers or Utilities.
Choose the Driver Deployment Wizard installation program.
Note
For Windows Vista®, when the User Account Control screen appears, click Continue.
d
e
f
Click Next in response to the Welcome message.
Read the license agreement carefully. Then follow the on-screen instructions.
Click Finish. Now the Driver Deployment Wizard software has been installed.
9
126
Driver Deployment Wizard (Windows® only)
Using the Driver Deployment Wizard software
a
b
c
d
9
When you run the Wizard for the first time you will see a welcome screen. Click Next.
Choose Printer, and then click Next.
Choose your connection type to the printer that you want to print to.
Choose the option you require, and follow the on-screen instructions.
If you choose Brother Peer-to-Peer Network Printer, the following screen is displayed.
„ Setting the IP Address
If the machine does not have an IP address, the Wizard will allow you to change the IP address by
choosing the machine from the list and by choosing the Configure IP option. A dialog box then
appears which allows you to specify information such as the IP address, subnet mask and also the
gateway address.
e
Choose the machine you wish to install.
„ If the printer driver you wish to use is installed on your computer:
Check the box of Currently installed drivers and choose the machine you wish to install, and then
click Next.
„ If the driver you wish to use is not installed on your computer:
1 Click Have Disk....
2 Choose the OS you wish to use, and then click OK.
3 Click Browse... and choose the appropriate printer driver that is contained in the CD-ROM or in
the network share. Click Open.
127
9
Driver Deployment Wizard (Windows® only)
4 For example, choose the “X:\\install\your language\PCL\win2kxpvista 1” folder (where X is your
drive letter). Click OK.
1
f
g
win2kxpvista folder for 32-bit OS users and winxpx64vista64 folder for 64-bit OS users
Click Next after you choose the correct driver.
A summary screen will appear. Confirm the settings of the driver.
9
„ Creating an executable file
The Driver Deployment Wizard software can also be used to create self running .EXE files. These
self-running .EXE files can be saved to the network, copied to a CD-ROM, USB memory or even
E-mailed to another user. Once run, the driver and its settings are automatically installed without any
user intervention.
• Copy the Driver files to this PC and create an installation program for other users.
Choose this option if you wish to install the driver onto your computer and also create a self-running
executable file for use with another computer using the same operating system as your own.
• Only create an Installation Program for other users.
Choose this option if the driver is already installed on your computer and you wish to create a
self-running executable file without installing the driver again on your own computer.
128
Driver Deployment Wizard (Windows® only)
Note
• If you work in a “queue” based network and you create an executable file for another user who does not
have access to the same printer queue that you define into the executable file, the driver when installed
on the remote computer will default to LPT1 printing.
• If you check the box of Currently installed drivers in e, you can change the default settings of the
printer driver, such as paper size by clicking Custom....
h
Click Finish. The driver is automatically installed to your computer.
9
129
Web Based Management10
10
Web Based Management
10
Overview
10
A standard Web Browser can be used to manage your machine using the HTTP (Hyper Text Transfer
Protocol). You can get the following information from a machine on your network using a web browser.
„ Machine status information
„ Change network settings such as TCP/IP information
„ Software version information of the machine and print server
„ Change network and machine configuration details
Note
We recommend Microsoft® Internet Explorer® 6.0 (or greater) or Firefox 1.0 (or greater) for Windows® and
Safari 1.3 (or greater) for Macintosh. Please also make sure that JavaScript and Cookies are always
enabled in whichever browser you use. If a different web browser is used, make sure it is compatible with
HTTP 1.0 and HTTP 1.1.
You must use the TCP/IP protocol on your network and have a valid IP address programmed into the print
server and your computer.
Note
• To learn how to configure the IP address on your machine, see Setting the IP address and subnet mask
on page 13.
• You can use a web browser on most computing platforms, for example, Macintosh and UNIX users are
also able to connect to the machine and manage it.
• You can also use the BRAdmin applications to manage the machine and its network configuration.
• This print server also supports HTTPS for secure management using SSL. See Managing your network
printer securely on page 148.
130
10
Web Based Management
How to configure the print server settings using Web Based
Management (web browser)
10
A standard web browser can be used to change your print server settings using the HTTP (Hyper Text
Transfer Protocol).
Note
To use a web browser, you will need to know the IP address or node name of the print server.
a
b
Start your web browser.
Type “http://printer's IP address/” into your browser. (where “printer's IP address” is
the printer’s IP address)
„ For example:
http://192.168.1.2/
Note
• If you have edited the hosts file on your computer or are using a Domain Name System (DNS), you can
also enter the DNS name of the print server.
• For Windows® users, as the print server supports TCP/IP and NetBIOS names, you can also enter the
NetBIOS name of the print server. The NetBIOS name can be seen on the Network Configuration page.
To learn how to print the Network Configuration page, see Printing the Network Configuration page on
page 123. The NetBIOS name assigned is the first 15 characters of the node name and by default it will
appear as “BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network.
• For Macintosh users, you can have easy access to the Web Based Management System by clicking the
machine icon on Status Monitor screen. For more information, see the User’s Guide on the CD-ROM.
c
d
Click Network Configuration.
e
f
Click OK.
Enter a user name and a password. The default User Name is “admin” and the default Password is
“access”.
You can now change the print server settings.
Note
If you have changed the protocol settings, restart the printer after clicking Submit to activate the
configuration.
131
10
Network printing from Windows® basic
TCP/IP Peer-to-Peer printing
Network printing from Windows ® bas ic TCP/IP Peer-to-Peer printing11
11
11
Overview
11
To connect your machine to your network, you need to follow the steps in the Quick Setup Guide. We
recommend that you use the Brother installer application on the CD-ROM which we have provided with the
machine. By using this application, you can easily connect your machine to your network and install the
network software and printer driver which you need to complete the configuration of your machine for a
network. You will be guided by the on-screen instructions until you are able to use your Brother network
machine.
If you are a Windows® user and want to configure your machine without using the Brother installer
application, use the TCP/IP protocol in a Peer-to-Peer environment. Please follow the instructions in this
chapter. This chapter explains how to install the network software and the printer driver which you will need
to be able to print using your network machine.
Note
• You must configure the IP address on your machine before you proceed with this chapter. If you need
to configure the IP address, see Chapter 2 first.
• Verify the host computer and the machine are either on the same subnet, or that the router is properly
configured to pass data between the two devices.
• If you are connecting to a Network Print Queue or Share (printing only), see Installation when using a
Network Print Queue or Share on page 191 for installation details.
• The default password for Brother print server is “access”.
11
132
Network printing from Windows® basic TCP/IP Peer-to-Peer printing
Configuring the standard TCP/IP port
11
Printer driver not yet installed
11
For Windows Vista® and Windows Server® 2008
11
a
(For Windows Vista®) Click the
button, Control Panel, Hardware and Sound, and then Printers.
®
(For Windows Server 2008) Click the Start button, Control Panel, Hardware and Sound, and then
Printers.
b
c
d
Click Add a printer.
Choose Add a local printer.
You must now choose the correct Network printing port. Choose Create a new port and then Standard
TCP/IP Port from the pull-down window, then click Next.
e
Choose TCP/IP Device from the pull-down window of Device type. Enter the IP address, or the node
name you wish to configure. The Wizard will automatically enter the Port name information for you, then
click Next.
f
Windows Vista® and Windows Server® 2008 will now contact the printer that you specified. If you did not
specify the correct IP address or name then an error dialog will appear.
g
Now that you have configured the port, you must specify which printer driver you wish to use. Choose
the appropriate driver from the list of supported printers. If you are using a driver supplied with the
machine on the CD-ROM then choose the Have Disk option to browse to the CD-ROM.
h
For example, choose the “X:\\install\your language\PCL\win2kxpvista 1” folder (where X is your drive
letter). Click Open.
1
i
win2kxpvista folder for 32-bit OS users and winxpx64vista64 folder for 64-bit OS users
Specify a name and click Next.
Note
• When the User Account Control screen appears, click Continue.
• If the printer driver that you are installing does not have a Digital Certificate you will see a warning
message. Click Install this driver software anyway to continue with the installation.
j
Continue through the Wizard clicking Finish when complete.
133
11
Network printing from Windows® basic TCP/IP Peer-to-Peer printing
For Windows® 2000/XP and Windows Server® 2003
a
For Windows ® XP and Windows Server® 2003:
Click the Start button and choose Printers and Faxes.
For Windows ® 2000:
Click the Start button, choose Settings and then Printers.
b
For Windows ® XP and Windows Server® 2003:
Click Add a printer to start the Add Printer Wizard.
For Windows ® 2000:
Double-click the Add Printer icon to start the Add Printer Wizard.
c
d
Click Next when you see the Welcome to the Add Printer Wizard screen.
11
Choose Local printer and deselect the Automatically detect and install my Plug and Play printer
option, then click Next.
e
You must now choose the correct Network printing port. Choose Create a new port and choose
Standard TCP/IP Port from the pull-down window, then click Next.
f
g
The Add Standard TCP/IP Printer Port Wizard will now appear. Click Next.
h
Windows® 2000/XP and Windows Server® 2003 will now contact the machine that you specified. If you
did not specify the correct IP address or name then an error dialog will appear.
i
j
Click Finish to complete the Wizard.
k
For example, choose the “X:\\install\your language\PCL\win2kxpvista 1” folder (where X is your drive
letter). Click Open.
Enter the IP address, or the node name you wish to configure. The Wizard will automatically enter the
Port name information for you, then click Next.
Now that you have configured the port, you must specify which printer driver you wish to use. Choose
the appropriate driver from the list of supported printers. If you are using a driver supplied with the
machine on the CD-ROM then choose the Have Disk option to browse to the CD-ROM.
1
l
m
win2kxpvista folder for 32-bit OS users and winxpx64vista64 folder for 64-bit OS users
Specify a name and click Next.
Continue through the Wizard clicking Finish when complete.
134
11
Network printing from Windows® basic TCP/IP Peer-to-Peer printing
Printer driver already installed
11
If you have already installed the printer driver and wish to configure it for network printing, follow these steps:
a
For Windows Vista® and Windows Server® 2008:
(For Windows Vista®) Click the
button, Control Panel, Hardware and Sound, and then Printers.
®
(For Windows Server 2008) Click the Start button, Control Panel, Hardware and Sound, and then
Printers.
For Windows ® XP and Windows Server® 2003:
Click the Start button and choose Printers and Faxes windows.
For Windows ® 2000:
Click the Start button and choose Settings and then Printers.
b
c
d
Right-click on the printer driver you wish to configure, and then choose Properties.
e
f
g
h
The Standard TCP/IP Port Wizard will start. Click Next.
Click the Ports tab and click Add Port.
Choose the port that you wish to use. Typically this would be Standard TCP/IP Port. Then click the New
Port... button.
Enter the IP address of your network printer. Click Next.
Click Finish.
Close Printer Ports and Properties dialog box.
11
Other sources of information
11
See Configuring your machine for a network on page 10 and Configuring your machine for a wireless network
(For HL-3070CW) on page 18 to learn how to configure the IP address of the machine.
135
Internet printing for Windows ® 12
12
Internet printing for Windows®
12
Overview
12
Windows® 2000/XP, Windows Vista® and Windows Server® 2003/2008 users can print using TCP/IP using
the standard Network Printing IPP protocol software built into Windows® 2000/XP, Windows Vista® and
Windows Server® 2003/2008 installation.
Note
• You must configure the IP address on your printer before you proceed with this chapter. If you need to
configure the IP address, see Chapter 2 first.
• Verify the host computer and machine are either on the same subnet, or that the router is properly
configured to pass data between the two devices.
• The default password for Brother print servers is “access”.
• This print server also supports the IPPS printing, see Printing documents securely using IPPS on
page 155.
IPP printing for Windows® 2000/XP, Windows Vista® and
Windows Server® 2003/2008
12
Use the following instructions if you wish to use the IPP printing capabilities of Windows® 2000/XP, Windows
Vista® and Windows Server® 2003/2008.
For Windows Vista® and Windows Server® 2008
12
a
(For Windows Vista®) Click the
button, Control Panel, Hardware and Sound, and then Printers.
® 2008) Click the Start button, Control Panel, Hardware and Sound, and then
(For Windows Server
Printers.
b
c
d
e
Click Add a printer.
Choose Add a network, wireless or Bluetooth printer.
Click The printer that I want isn’t listed.
Choose Select a shared printer by name and then enter the following in the URL field:
http://printer's IP address:631/ipp (where “printer's IP address” is the printer's IP
address or the node name.)
Note
If you have edited the hosts file on your computer or are using a Domain Name System (DNS), you can also
enter the DNS name of the print server. As the print server supports TCP/IP and NetBIOS names, you can
also enter the NetBIOS name of the print server. The NetBIOS name can be seen on the Network
Configuration page. To learn how to print the Network Configuration page, see Printing the Network
136
12
Internet printing for Windows®
Configuration page on page 123. The NetBIOS name assigned is the first 15 characters of the node name
and by default it will appear as “BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a
wireless network.
f
When you click Next, Windows Vista® and Windows Server® 2008 will make a connection with the URL
that you specified.
„ If the printer driver has already been installed:
You will see the printer selection screen in the ‘Add printer’ wizard. Click OK.
If the appropriate printer driver is already installed on your computer, Windows Vista® and Windows
Server® 2008 will automatically use that driver. In this case, you will simply be asked if you wish to
make the driver the default printer, after which the Driver installation wizard will complete. You are
now ready to print.
Go to k.
„ If the printer driver has NOT been installed:
One of the benefits of the IPP printing protocol is that it establishes the model name of the printer
when you communicate with it. After successful communication you will see the model name of the
printer automatically. This means that you do not need to inform Windows Vista® and Windows
Server® 2008 about the type of printer driver to be used.
Go to g.
g
If your printer is not in the list of supported printers, click Have Disk. You will then be asked to insert the
driver disk.
h
Click Browse... and choose the appropriate Brother printer driver that is contained in the CD-ROM or in
the network share. Click Open.
For example, choose the “X:\\install\your language\PCL\win2kxpvista 1” folder (where X is your drive
letter). Click Open.
1
i
j
12
win2kxpvista folder for 32-bit OS users and winxpx64vista64 folder for 64-bit OS users
Click OK.
Specify the model name of the printer. Click OK.
Note
• When the User Account Control screen appears, click Continue.
• If the printer driver that you are installing does not have a Digital Certificate you will see a warning
message. Click Install this driver software anyway to continue with the installation. The Add Printer
Wizard will then complete.
k
You will see the Type a printer name screen in the Add Printer Wizard. Check the Set as the default
printer check box if you want to use this printer as the default printer, and then click Next.
l
To test the printer connection, click Print a test page, and then click Finish and the printer is now
configured and ready to print.
137
Internet printing for Windows®
For Windows® 2000/XP and Windows Server® 2003
a
For Windows ® XP and Windows Server® 2003:
Click the Start button and choose Printers and Faxes.
For Windows ®2000:
Click the Start button and choose Settings and then Printers.
b
For Windows ® XP and Windows Server® 2003:
Click Add a printer to start the Add Printer Wizard.
For Windows ® 2000:
Double-click the Add Printer icon to start the Add Printer Wizard.
c
d
Click Next when you see the Welcome to the Add Printer Wizard screen.
e
f
12
Choose Network Printer.
For Windows ® XP and Windows Server® 2003:
Choose A network printer, or a printer attached to another computer.
For Windows ® 2000:
Choose Network Printer.
Click Next.
For Windows ® XP and Windows Server® 2003:
Choose Connect to a printer on the Internet or on a home or office network and then enter the
following in the URL field:
http://printer's IP address:631/ipp
(where “printer's IP address” is the printer's IP address or the node name.)
For Windows ® 2000:
Choose Connect to a printer on the Internet or on your intranet and then enter the following in the
URL field:
http://printer's IP address:631/ipp
(Where “printer's IP address” is the printer's IP address or the node name).
Note
If you have edited the hosts file on your computer or are using a Domain Name System (DNS), you can also
enter the DNS name of the print server. As the print server supports TCP/IP and NetBIOS names, you can
also enter the NetBIOS name of the print server. The NetBIOS name can be seen on the Network
Configuration page. To learn how to print the Network Configuration page, see Printing the Network
Configuration page on page 123. The NetBIOS name assigned is the first 15 characters of the node name
and by default it will appear as “BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a
wireless network.
138
12
Internet printing for Windows®
g
When you click Next, Windows® 2000/XP and Windows Server® 2003 will make a connection with the
URL that you specified.
„ If the printer driver has already been installed:
If the appropriate printer driver is already installed on your computer, Windows® 2000/XP and
Windows Server® 2003 will automatically use that driver. In this case, you will simply be asked if you
wish to make the driver the default printer, after which the Driver installation wizard will complete. You
are now ready to print.
Go to l.
„ If the printer driver has NOT been installed:
One of the benefits of the IPP printing protocol is that it establishes the model name of the printer
when you communicate with it. After successful communication you will see the model name of the
printer automatically. This means that you do not need to inform Windows® 2000 about the type of
printer driver to be used.
Go to h.
h
The driver installation starts automatically.
Note
If the printer driver that you are installing does not have a Digital Certificate you will see a warning message.
Click Continue Anyway 1 to continue with the installation.
1
i
j
Yes for Windows® 2000 users
Click OK when you see the Insert Disk screen.
Click Browse... and choose the appropriate Brother printer driver that is contained in the CD-ROM or in
the network share. Click Open.
For example, choose the “X:\\install\your language\PCL\win2kxpvista 1” folder (where X is your drive
letter). Click Open.
1
k
l
m
win2kxpvista folder for 32-bit OS users and winxpx64vista64 folder for 64-bit OS users
Click OK.
Check Yes if you want to use this printer as the default printer. Click Next.
Click Finish and the printer is now configured and ready to print. To test the printer connection, print a
test page.
139
12
Internet printing for Windows®
Specifying a different URL
12
Please note that there are several possible entries that you can enter for the URL field.
http://printer's IP address:631/ipp
This is the default URL and we recommend that you use this URL.
http://printer's IP address:631/ipp/port1
This is for HP Jetdirect compatibility.
http://printer's IP address:631/
Note
If you forget the URL details, you can simply enter the above text (http://printer's IP address/)
and the printer will still receive and process data.
Where “printer's IP address” is the printer’s IP address or the node name.
„ For example:
http://192.168.1.2/
http://BRN123456765432/
Other sources of information
12
For how to configure the IP address of the printer, see Configuring your machine for a network in Chapter 2.
12
140
Network printing from Mac intosh using the BR-Script 3 driv er (For HL-3070CW)13
13
Network printing from Macintosh using
the BR-Script 3 driver (For HL-3070CW)
13
Overview
13
This chapter explains how to configure the BR-Script 3 (PostScript® 3™ language emulation) printer driver
on a Network.
How to choose the printer driver (TCP/IP)
For Mac OS X 10.3.9 to 10.4.x users
a
b
c
d
e
f
13
13
Turn on your Macintosh.
From the Go menu, choose Applications.
Open the Utilities folder.
Double-click the Printer Setup Utility icon.
Click Add.
(Mac OS X 10.3.9) Choose IP Printing.
(Mac OS X 10.4.x) Choose IP Printer.
(Mac OS X 10.3.9)
(Mac OS X 10.4.x)
13
141
Network printing from Macintosh using the BR-Script 3 driver (For HL-3070CW)
g
(Mac OS X 10.3.9) Enter the IP address of the printer into the Printer Address box.
(Mac OS X 10.4.x) Enter the IP address of the printer into the Address box.
(Mac OS X 10.3.9)
(Mac OS X 10.4.x)
Note
• The Network Configuration page will allow you to confirm the IP address. To learn how to print the
Network Configuration page, see Printing the Network Configuration page on page 123.
• When specifying the Queue Name (Queue), use the PostScript® service "BRNxxxxxxxxxxxx_AT" for
Macintosh. Where "xxxxxxxxxxxx" is your machine's MAC Address (Ethernet Address).
h
From the Printer Model (Print Using) pop-up menu, choose your model. For example, choose Brother
HL-3070CW BR-Script3.
(Mac OS X 10.3.9)
(Mac OS X 10.4.x)
13
i
Click Add and the printer will be available from the Printer List. The printer is now ready to print.
142
Network printing from Macintosh using the BR-Script 3 driver (For HL-3070CW)
For Mac OS X 10.5.x
a
b
c
d
e
Turn on your Macintosh.
f
g
Choose Line Printer Daemon - LPD from the Protocol list.
13
Choose System Preferences from the Apple menu.
Choose Print & Fax.
Click + which is located below the Printers section.
Choose IP.
Enter the TCP/IP address or DNS Name of the printer into the Address box.
Note
When specifying the Queue, use the PostScript® service "BRNxxxxxxxxxxxx_AT" for Macintosh. Where
"xxxxxxxxxxxx" is your machine's MAC Address (Ethernet Address).
13
143
Network printing from Macintosh using the BR-Script 3 driver (For HL-3070CW)
h
From the Print Using pop-up menu, choose your model. For example, choose Brother HL-3070CW
BR-Script3.
i
Click Add and the printer will be available from the Printers. The printer is now ready to print.
13
144
Security features14
14
Security features
14
Overview
14
In today’s world there are many security threats to your network and the data that travels over it. Your Brother
machine employs some of the latest network security and encryption protocols available today. These
network features can be integrated into your overall network security plan to help protect your data and
prevent unauthorized access to the machine. This chapter explains various security protocols supported and
how to configure them.
Security terms
14
„ CA (Certificate Authority)
A CA is an entity that issues digital certificates (especially X.509 certificates) and vouches for the binding
between the data items in a certificate.
„ CSR (Certificate Signing Request)
A CSR is a message sent from an applicant to a CA in order to apply for issue of a certificate. The CSR
contains information identifying the applicant, the public key generated by the applicant and the digital
signature of the applicant.
„ Certificate
A Certificate is the information that binds together a public key with an identity. The certificate can be used
to verify that a public key belongs to an individual. The format is defined by the x.509 standard.
„ Digital signature
A Digital signature is a value computed with a cryptographic algorithm and appended to a data object in
such a way that any recipient of the data can use the signature to verify the data's origin and integrity.
„ Public key cryptosystem
A Public key cryptosystem is a modern branch of cryptography in which the algorithms employ a pair of
keys (a public key and a private key) and use a different component of the pair for different steps of the
algorithm.
„ Shared key cryptosystem
A Shared key cryptosystem is a branch of cryptography involving algorithms that use the same key for two
different steps of the algorithm (such as encryption and decryption).
145
14
Security features
Security protocols
14
The Brother print server supports the following security protocols.
Note
How to configure the protocol settings, see How to configure the print server settings using Web Based
Management (web browser) on page 131.
SSL (Secure Socket Layer) / TLS (Transport Layer Security)
14
These security communication protocols encrypt data to prevent security threats.
Web server (HTTPS)
14
The internet protocol that the Hyper Text Transfer Protocol (HTTP) uses SSL.
IPPS
14
The printing protocol that the Internet Printing Protocol (IPP Version 1.0) uses SSL.
SNMPv3
14
The Simple Network Management Protocol version 3 (SNMPv3) provides user authentication and data
encryption to manage network devices securely.
Security methods for E-mail notification
14
The Brother print server supports the following security methods for E-mail notification.
Note
How to configure the settings of security methods, see How to configure the print server settings using Web
Based Management (web browser) on page 131.
POP before SMTP (PbS)
14
The user authentication method for sending E-mail from a client. The client is given permission to use the
SMTP server by accessing the POP3 server before sending the E-mail.
SMTP-AUTH (SMTP Authentication)
14
14
SMTP-AUTH expands SMTP (the Internet E-mail sending protocol) to include an authentication method that
ensures the true identity of the sender is known.
APOP (Authenticated Post Office Protocol)
14
APOP expands POP3 (the Internet receiving protocol) to include an authentication method that encrypts the
password when the client receives E-mail.
146
Security features
Configuring the protocol settings
14
You can enable or disable each protocol and security method using Web Based Management (web browser).
Note
We recommend Microsoft® Internet Explorer® 6.0 (or greater) or Firefox 1.0 (or greater) for Windows® and
Safari 1.3 (or greater) for Macintosh. Please also make sure that JavaScript and Cookies are always
enabled in whichever browser you use. If a different web browser is used, make sure it is compatible with
HTTP 1.0 and HTTP 1.1. To use a web browser, you will need to know the IP address of the print server.
a
b
Start your web browser.
Type http://printer's IP address/ into your browser (where “printer's IP address” is the
printer's IP address).
„ For example:
http://192.168.1.2/
Note
• If you have edited the hosts file on your computer or are using a Domain Name System, you can also
enter the DNS name of the print server.
• For Windows® users, as the print server supports TCP/IP and NetBIOS names, you can also enter the
NetBIOS name of the print server. The NetBIOS name can be seen on the Network Configuration page.
To learn how to print the Network Configuration page, see Printing the Network Configuration page on
page 123. The NetBIOS name assigned is the first 15 characters of the node name and by default it will
appear as “BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network.
c
d
Click Network Configuration.
e
f
Click OK.
Enter a user name and a password. The default User Name is “admin” and the default Password is
“access”.
Click Configure Protocol.
Now you can configure the protocol settings.
14
Note
If you change the protocol settings, restart the printer after clicking Submit to activate the configuration.
147
Security features
Managing your network printer securely
14
To manage your network printer securely, you need to use the management utilities with security protocols.
Secure Management using Web Based Management (web browser)
14
We recommend to use HTTPS and SNMPv3 protocol for secure management. To use the HTTPS protocol,
the following printer settings are required.
„ A certificate and private key must be installed in the printer. For how to install a certificate and private key,
see Creating and installing a certificate on page 158.
„ The HTTPS protocol must be enabled. To enable the HTTPS protocol, enable SSL communication is
used (port 443) from the Advanced Setting page of Web Based Management (Web Server) on the
Configure Protocol page. For information on how to access the Configure Protocol page, see
Configuring the protocol settings on page 147.
Note
• We recommend Microsoft® Internet Explorer® 6.0 (or greater) or Firefox 1.0 (or greater) for Windows®
and Safari 1.3 (or greater) for Macintosh. Please also make sure that JavaScript and Cookies are always
enabled in whichever browser you use. If a different web browser is used, make sure it is compatible with
HTTP 1.0 and HTTP 1.1. To use a web browser, you will need to know the IP address of the print server.
• We recommend to disable the Telnet, FTP and TFTP protocols. Accessing the machine using these
protocols is not secure. See Configuring the protocol settings on page 147.
a
b
Start your web browser.
Type “https://Common Name/” into your browser. (Where “Common Name” is the Common Name
that you assigned for the certificate, such as an IP address. For how to assign a Common Name for the
certificate, see Creating and installing a certificate on page 158.)
„ For example:
https://192.168.1.2/ (if the Common Name is the printer’s IP address)
Note
• If you have edited the hosts file on your computer or are using a Domain Name System, you can also
enter the DNS name of the print server.
®
• For Windows users, as the print server supports TCP/IP and NetBIOS names, you can also enter the
NetBIOS name of the print server. The NetBIOS name can be seen on the Network Configuration page.
To learn how to print the Network Configuration page, see Printing the Network Configuration page on
page 123. The NetBIOS name assigned is the first 15 characters of the node name and by default it will
appear as “BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network.
148
14
Security features
c
You can now access the printer using HTTPS.
We recommend secure management (SNMPv3) be used along with the HTTPS protocol. If you use the
SNMPv3 protocol, follow the steps below.
Note
You can also change the SNMP settings by using BRAdmin Professional 3 or Web BRAdmin.
d
e
Click Network Configuration.
f
g
h
Click Configure Protocol.
Enter a user name and a password. The default User Name is “admin” and the default Password is
“access”.
Make sure that the SNMP setting is enabled, and then click Advanced Setting of SNMP.
You can configure the SNMP settings from the screen below.
14
We have three SNMP modes of operation.
„ SNMPv3 read-write access
With this mode the print server uses version 3 of the SNMP protocol. If you want to manage the print server
securely, use this mode.
Note
When you use the SNMPv3 read-write access mode, please note the following.
149
Security features
• You can manage the print server by using BRAdmin Professional 3, Web BRAdmin or Web Based
Management (web browser) only.
• We recommend secure SSL communication (HTTPS) be used.
• Except for BRAdmin Professional 3 and Web BRAdmin, all applications that use SNMPv1/v2c will be
restricted. To allow the use of SNMPv1/v2c applications, use SNMPv3 read-write access and v1/v2c
read-only access or SNMPv1/v2c read-write access mode.
„ SNMPv3 read-write access and v1/v2c read-only access
In this mode the print server uses the read-write access of version 3 and the read-only access of version
1 and version 2c of the SNMP protocol.
Note
When you use the SNMPv3 read-write access and v1/v2c read-only access mode, some of Brother
applications (e.g. BRAdmin Light) that access to the print server do not work properly since they authorize
the read-only access of version 1 and version 2c. If you want to use all applications, use the SNMPv1/v2c
read-write access mode.
„ SNMPv1/v2c read-write access
In this mode the print server uses version 1 and version 2c of the SNMP protocol. You can use all Brother
applications under this mode. However, it is not secure since it will not authenticate the user and the data
will not be encrypted.
Note
For more information, see the Help text in the Web Based Management.
14
150
Security features
Secure Management using BRAdmin Professional 3 (for Windows®)
14
To use the BRAdmin Professional 3 utility securely, you need to follow the points below.
„ We strongly recommend to use the latest version of the BRAdmin Professional 3 utility or Web BRAdmin
that are available as a download from http://solutions.brother.com/. If you use an older version of
BRAdmin 1 to manage your Brother machines the user authentication will not be secure.
„ If you want to avoid access to your printer from older versions of BRAdmin 1, you need to disable the
access from older versions of BRAdmin 1 from Advanced Setting of SNMP on Configure Protocol page
using Web Based Management (web browser). See Secure Management using Web Based Management
(web browser) on page 148.
„ Disable the Telnet, FTP and TFTP protocols. Accessing the machine using these protocols is not secure.
For how to configure the protocol settings, see How to configure the print server settings using Web Based
Management (web browser) on page 131.
„ If you use BRAdmin Professional 3 and Web Based Management (web browser) together, use Web Based
Management with the HTTPS protocol. See Secure Management using Web Based Management (web
browser) on page 148.
„ If you are managing a mixed group of older print servers 2 and the new print servers with BRAdmin
Professional 3, we recommend using a different password in each group. This will ensure security is
maintained on the new print servers.
1
BRAdmin Professional older than Ver. 2.80, Web BRAdmin older than Ver. 1.40, BRAdmin Light for Macintosh older than Ver. 1.10
2
NC-2000 series, NC-2100p, NC-3100h, NC-3100s, NC-4100h, NC-5100h, NC-5200h, NC-6100h, NC-6200h, NC-6300h, NC-6400h, NC-8000,
NC-100h, NC-110h, NC-120w, NC-130h, NC-140w, NC-8100h, NC-9100h, NC-7100w, NC-7200w, NC-2200w
14
151
Security features
Secure Function Lock 2.0 (For HL-3070CW)
14
Secure Function Lock 2.0 from Brother helps you to save money and increase security by restricting the
functions available on your Brother machine.
Secure Function Lock allows you to configure passwords for selected users, granting them access to some,
or all, of these functions, or limiting them to a page limit. This means that only authorized people can use
them.
You can configure and change the following Secure Function Lock settings using a web browser.
„ PC print 1
„ USB Direct Print
„ Color Print
„ Page limit
„ Page Counter (Only for reference)
1
If you register the PC user login names, you can restrict PC print without the user entering a password. For more detail, see Restricting PC print
by PC user login name on page 153.
How to configure the Secure Function Lock 2.0 settings using Web Based
Management (web browser)
14
Basic configuration
a
14
Click Administrator Settings on the HL-3070CW web page, and then click Secure Function Lock.
14
b
Choose On from Function Lock.
152
Security features
c
Enter an up to 15 digit alphanumeric group name or user name in the ID Number/Name box and then
enter a four-digit password in the PIN box.
d
Uncheck the functions that you want to restrict in the Print box or the Others box. If you want to configure
the maximum page count, check the On box in Page Limit, and then enter the number in the Max. box.
Then click Submit.
e
If you want to restrict the PC printing by PC login user name, click PC Print Restriction by Login Name
and configure the settings. (See Restricting PC print by PC user login name below.)
Restricting PC print by PC user login name
14
By configuring this setting, the printer can authenticate by PC user login name to allow a print job from a
registered computer.
a
Click PC Print Restriction by Login Name. The PC Print Restriction by Login Name screen will
appear.
14
b
c
Choose On from PC Print Restriction.
Enter the PC user login name in the Login Name box and then choose the ID Number you set in the ID
Number/Name in step c in Basic configuration from the ID Number pull-down list for each Login Name.
Then click Submit.
Note
• If you want to restrict PC print per group, choose the same ID Number for each PC login name you want
in the group.
• If you are using the PC login name feature you must also make sure that the Use PC Login Name box
in the printer driver is checked. For more information about the printer driver, see the User's Guide on
the CD-ROM.
153
Security features
• The Secure Function Lock feature does not support the BR-Script 3 printer driver for printing.
Setting up public mode
14
You can set up the public mode to restrict what functions are available for public users. Public users do not
need to enter a password to access the features made available through this setting.
a
b
Uncheck the check box for the function that you want to restrict in the Public Mode box.
Click Submit.
Other features
14
You can set up the following features in the Secure Function Lock 2.0:
„ All Counter Reset
You can reset the page counter by clicking All Counter Reset.
„ Export to CSV file
You can export the current page counter including ID Number/Name information as a CSV file.
„ Last Counter Record
The machine retains the page count after the counter has been reset.
Note
Secure Function Lock 2.0 can be configured using BRAdmin Professional 3; this is available as a download
from http://solutions.brother.com/. This utility is only available for Windows® users.
14
154
Security features
Printing documents securely using IPPS
14
To print documents securely over the internet, you can use the IPPS protocol.
Note
• Communication using IPPS cannot prevent unauthorized access to the print server.
• IPPS is available for Windows® 2000/XP, Windows Vista® and Windows Server® 2003/2008.
To use the IPPS protocol, the following printer settings are required.
„ A certificate and private key must be installed in the printer. For how to install certificate and private key,
see Creating and installing a certificate on page 158.
„ The IPPS protocol must be enabled. To enable the IPPS protocol, enable SSL communication is used
(port 443) from the Advanced Setting page of IPP on the Configure Protocol page. For information on
how to access the Configure Protocol page, see Configuring the protocol settings on page 147.
The basic steps for IPPS printing are the same as IPP printing. For detailed information, see Internet printing
for Windows® in Chapter 12.
Specifying a different URL
14
Please note that there are several possible entries that you can enter for the URL field.
https://Common Name/ipp
This is the default URL and we recommend that you use this URL.
https://Common Name/ipp/port1
This is for HP Jetdirect compatibility.
https://Common Name/
Note
If you forget the URL details, you can simply enter the above text (https://Common Name/) and the
printer will still receive and process data.
Where “Common Name” is the Common Name that you assigned for the certificate, such as an IP address.
For how to assign a Common Name for the certificate, see Creating and installing a certificate on page 158.
„ For example:
https://192.168.1.2/ (if the Common Name is the printer’s IP address.)
155
14
Security features
Using E-mail notification with user authentication
14
To use the E-mail notification function via secure SMTP server that requires a user authentication, you need
to use POP before SMTP or SMTP-AUTH method. These methods prevent an unauthorized user from
accessing the mail server. You can use Web Based Management (web browser), BRAdmin Professional 3
and Web BRAdmin to configure these settings.
Note
You need to match the settings of POP3/SMTP authentication with one of the E-mail servers. Contact your
network administrator or your internet service provider about the configuration before using.
How to configure the POP3/SMTP settings using Web Based Management (web browser).
a
b
14
Start your web browser.
Type “http://printer's IP address/” into your browser (where “printer's IP address” is
the printer's IP address).
„ For example:
http://192.168.1.2/
Note
• If you have edited the hosts file on your computer or are using a Domain Name System, you can also
enter the DNS name of the print server.
• For Windows® users, as the print server supports TCP/IP and NetBIOS names, you can also enter the
NetBIOS name of the print server. The NetBIOS name can be seen on the Network Configuration page.
To learn how to print the Network Configuration page, see Printing the Network Configuration page on
page 123. The NetBIOS name assigned is the first 15 characters of the node name and by default it will
appear as “BRNxxxxxxxxxxxx” for a wired network or ”BRWxxxxxxxxxxxx” for a wireless network.
c
d
Click Network Configuration.
e
f
Click Configure Protocol.
Enter a user name and a password. The default User Name is "admin" and the default Password is
"access".
Make sure that the POP3/SMTP setting is enable, and then click Advanced Setting of POP3/SMTP.
156
14
Security features
g
You can configure the POP3/SMTP settings on this page.
Note
• You can also change the SMTP port number using Web Based Management. This is useful if your ISP
(Internet Service Provider) implements the “Outbound Port 25 Blocking (OP25B)” service. By changing
the SMTP port number to a specific number which your ISP is using for the SMTP server (for example,
port 587), you would then be able to send an E-mail via the SMTP server. You will also need to check
SMTP-AUTH of SMTP Server Authentication Method to enable the SMTP server authentication.
• If you can use both POP before SMTP and SMTP-AUTH, we recommend choosing SMTP-AUTH.
• If you choose POP before SMTP for the SMTP Server Authentication Method, you need to configure the
POP3 settings. You can also use the APOP method.
• For more information, see the Help text in the Web Based Management.
• You can also confirm whether the E-mail settings are correct after configuration by sending a test E-mail.
h
i
After configuring, click Submit. The Test E-mail Send/Receive Configuration dialog appears.
Follow the instructions on-screen if you want to test with the current settings.
157
14
Security features
Creating and installing a certificate
14
The Brother print server allows you to use SSL/TLS communication by configuring a certificate and
corresponding private key. This print server supports two certification methods. A self-signed certificate and
a certificate that is issued by a CA (Certificate Authority).
„ Using self-signed certificate
This print server issues its own certificate. Using this certificate, you can easily use the SSL/TLS
communication without having a certificate from a CA. See Creating and installing a self-signed certificate
on page 160.
„ Using a certificate from a CA
There are two methods for installing a certificate from a CA. If you already have a CA or if you want to use
a certificate from an outside trusted CA:
• When using a CSR (Certificate Signing Request) from this print server. See Creating CSR and installing
a certificate on page 173.
• When importing a certificate and a private key. See Import and export the certificate and private key on
page 175.
Note
• If you are going to use SSL/TLS communication, we recommend that you contact your system
administrator before using.
• This print server stores only one pair of a certificate and a private key that you installed or previously
imported. This printer overwrites the certificate and the private key if you install a new one.
• When you reset the print server back to its factory default settings, the certificate and the private key that
are installed will be deleted. If you want to keep the same certificate and the private key after resetting
the print server, export them before resetting and re-install them. See How to export the certificate and
private key on page 175.
This feature can be configured using Web Based Management (web browser) only. Follow these steps to
access the configure certificate page using Web Based Management.
a
b
Start your web browser.
Type “http://printer's IP address/” into your browser. (where “printer's IP address” is
the printer's IP address.)
„ For example:
http://192.168.1.2/
Note
• If you have edited the hosts file on your computer or are using a Domain Name System, you can also
enter the DNS name of the print server.
• For Windows ® users, as the print server supports TCP/IP and NetBIOS, you can also enter the NetBIOS
name of the print server. The NetBIOS name can be seen on the Network Configuration page. To learn
how to print the Network Configuration page, see Printing the Network Configuration page on page 123.
The NetBIOS name assigned is the first 15 characters of the node name and by default it will appear as
“BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network.
158
14
Security features
c
d
Click Network Configuration.
e
f
g
Click OK.
Enter a user name and a password. The default User Name is “admin” and the default Password is
“access”.
Click Configure Certificate.
You can configure the certificate settings from the screen below.
Note
• The functions that are grayed and unlinked indicate they are not available.
• For more information on configuration, see the Help text in the Web Based Management.
14
159
Security features
Creating and installing a self-signed certificate
14
How to create and install a self-signed certificate
a
b
14
Click Create Self-Signed Certificate on the Configure Certificate page.
Enter a Common Name and a Valid Date, then click Submit.
Note
• The length of the Common Name is less than 64 bytes. Enter an identifier such as an IP address, node
name or domain name to use when accessing this printer through SSL/TLS communication. The node
name is displayed by default.
• A warning will pop-up if you use the IPPS or HTTPS protocol and enter a different name in the URL than
the Common Name that was used for the self-signed certificate.
c
d
e
f
Now the self-signed certificate is created successfully.
Follow the on-screen instructions to configure the other security settings.
Restart the printer to activate the configuration.
Now the self-signed certificate is saved in your printer memory. To use SSL/TLS communication, the
self-signed certificate also needs to be installed on your computer. Proceed to the next section.
14
160
Security features
How to install the self-signed certificate on your computer
14
Note
The following steps are for Microsoft ® Internet Explorer® 6.0. If you use another web browser, follow the
help text of the web browser itself.
For Windows Vista® users that have administrator rights
a
b
Click the
c
Click Allow.
14
button and All Programs.
Right-click Internet Explorer, and then click Run as administrator.
14
161
Security features
d
Type “https://printer’s IP address/” into your browser to access your printer (where
“printer’s IP address” is the printer’s IP address or the node name).
Then, click Continue to this website (not recommended).
e
Click Certificate Error, and then click View certificates. For the rest of the instructions, follow the steps
from d on page 169.
14
162
Security features
For Windows Vista® users that do not have administrator rights
14
a
b
Click the
c
Choose the Administrator that you want to install with and enter the administrator password, and then
click OK.
button and All Programs.
Right-click Internet Explorer, and then click Run as administrator.
14
163
Security features
d
Type “https://printer’s IP address/” into your browser to access your printer (where
“printer’s IP address” is the printer’s IP address or the node name).
Then, click Continue to this website (not recommended).
e
Click Certificate Error, and then click View certificates.
f
Choose the Details tab, and then click Copy to File....
14
164
Security features
g
Click Next.
h
Make sure that DER encoded binary X.509 (.CER) is chosen, and then click Next.
i
Click Browse....
14
165
Security features
j
Click Browse Folders.
k
Choose a folder you want to save the certificate file in and enter a file name, and then click Save.
Note
If you choose Desktop, the certificate file is saved to the Desktop of the Administrator that you chose.
l
Click Next.
14
166
Security features
m
Click Finish.
n
Click OK.
o
Click OK.
14
167
Security features
p
Open the folder that you saved the certificate file in k and double-click the certificate file. For the rest of
the instructions, follow the steps from d on page 164.
14
168
Security features
For Windows® 2000/XP and Windows Server ® 2003/2008 users
a
b
Start your web browser.
c
When the following dialog appears, click View Certificate.
d
Click Install Certificate… from the General tab.
14
Type “https://printer’s IP address/” into your browser to access your printer (where
“printer’s IP address” is the IP address or the node name that you assigned for the certificate).
14
169
Security features
e
When the Certificate Import Wizard appears, click Next.
f
Choose Place all certificates in the following store and then, click Browse....
g
Choose Trusted Root Certification Authorities and then, click OK.
14
170
Security features
h
Click Next.
i
Click Finish.
j
Click Yes, if the fingerprint (thumbprint) is correct.
14
171
Security features
Note
The fingerprint (thumbprint) is printed on the Network Configuration page. To learn how to print the Network
Configuration page, see Printing the Network Configuration page on page 123.
k
Click OK.
l
Now the self-signed certificate is installed on your computer, and the SSL/TLS communication is
available.
14
172
Security features
Creating CSR and installing a certificate
14
How to create the CSR
a
b
14
Click Create CSR on the Configure Certificate page.
Enter a Common Name and your information, such as Organization. Then click Submit.
Note
• We recommend that the Root Certificate from the CA be installed on your computer before creating the
CSR.
• The length of the Common Name is less than 64 bytes. Enter an identifier such as an IP address, node
name or domain name to use when accessing this printer through SSL/TLS communication. The node
name is displayed by default. The Common Name is required.
• A warning will pop-up if you enter a different name in the URL than the Common Name that was used
for the certificate.
• The length of the Organization, the Organization Unit, the City/Locality and the State/Province is
less than 64 bytes.
• The Country/Region should be an ISO 3166 country code composed of two characters.
c
d
When the contents of the CSR appear, click Save to save the CSR file to your computer.
Now the CSR is created.
Note
• Follow your CA policy regarding the method to send a CSR to your CA.
• If you are using Enterprise root CA of Windows Server® 2003/2008, we recommend using the Web
Server of the CertificateTemplate when creating the certificate. For more information, visit us at
http://solutions.brother.com/.
14
173
Security features
How to install the certificate to your printer
14
When you receive the certificate from a CA, follow the steps below to install it into the print server.
Note
Only a certificate issued with this printer’s CSR can be installed.
a
b
c
d
e
f
Click Install Certificate on the Configure Certificate page.
Specify the file of the certificate that has been issued by a CA, and then click Submit.
Now the certificate is created successfully.
Follow the on-screen instructions to configure the other security settings.
Restart the printer to activate the configuration.
Now the certificate is saved in your printer. To use SSL/TLS communication, the Root Certificate from
the CA needs to be installed on your computer. Contact your network administrator about installation.
14
174
Security features
Import and export the certificate and private key
14
How to import the certificate and private key
a
b
c
d
e
f
g
Click Import Certificate and Private Key on the Configure Certificate page.
Specify the file that you want to import.
Enter the password if the file is encrypted, and then click Submit.
Now the certificate and private key are imported successfully.
Follow the on-screen instructions to configure the other security settings.
Restart the printer to activate the configuration.
Now the certificate and private key are imported to your printer. To use SSL/TLS communication, the
Root Certificate from the CA needs to also be installed on your computer. Contact your network
administrator about the installation.
How to export the certificate and private key
a
b
14
14
Click Export Certificate and Private Key on the Configure Certificate page.
Enter the password if you want to encrypt the file.
Note
If a blank password is used, the output is not encrypted.
c
d
e
Enter the password again for confirmation, and then click Submit.
Specify the location where you want to save the file.
Now the certificate and private key are exported to your computer.
Note
14
You can import the file that you exported.
175
Troubleshooting15
15
Troubleshooting
15
Overview
15
This chapter explains how to resolve typical network problems you may encounter when using the machine.
If, after reading this chapter, you are unable to resolve your problem, please visit the Brother Solutions Center
at: http://solutions.brother.com/
This chapter is divided into the following sections:
„ General problems
„ Network print software installation problems
„ Printing problems
„ Protocol-specific troubleshooting
„ Wireless network specific troubleshooting (For HL-3070CW)
General problems
15
CD-ROM is inserted, but does not start automatically.
15
If your computer does not support Autorun, the menu will not start automatically after inserting the CD-ROM.
In this case, execute start.exe in the root directory of the CD-ROM.
How to reset the Brother print server back to the factory default
15
You can reset the print server back to its factory default settings (resetting all information such as the
password and IP address information). (See Reset the network settings to the factory default on page 122.)
My computer cannot find the machine/print server.
I cannot make a necessary connection to the machine/print server.
My machine/print server does not appear in the window of Remote Setup, BRAdmin Light or
BRAdmin Professional 3.
15
„ For Windows®
The firewall on your computer may be rejecting the necessary network connection to the machine. In this
case, you will need to disable the Firewall on your computer and re-install the drivers.
Windows Vista® users:
1) Click the
settings.
15
button, Control Panel, Network and Internet, Windows Firewall and click Change
2) When the User Account Control screen appears, do the following.
• Users who have administrator rights: Click Continue.
• For users who do not have administrator rights: Enter the administrator password and click OK.
3) Click the General tab. Make sure that Off (not recommended) is selected.
176
15
Troubleshooting
4) Click OK.
Note
After the Brother software package is installed, turn your Firewall back on.
Windows® XP SP2 / SP3 users:
15
1) Click the Start button, Control Panel, Network and Internet Connections.
2) Double-click Windows Firewall.
3) Click the General tab. Make sure that Off (not recommended) is selected.
4) Click OK.
Note
After the Brother software package is installed, turn your Firewall back on.
15
177
Troubleshooting
Network print software installation problems
15
The Brother print server is not found during setup of the network print software installation or from
the printer driver of the Brother machine in Windows®. The Brother print server is not found using
the Simple Network Configuration capabilities of Mac OS X.
15
„ For a network with an Ethernet cable connection
Make sure you have completed the IP address setting of the Brother print server according to Chapter 2
of this User’s Guide before installing the network print software or printer driver.
„ For a wireless network
Make sure you have completed the IP address setting and wireless network settings of the Brother print
server according to Chapter 3 of this User’s Guide before installing the network print software or printer
driver.
Check the following:
a
b
Make sure that the machine is powered on, is on-line and ready to print.
Check the connection status for your network.
For wired network users:
Check to see if there is any LED activity. Brother print server has two LEDs on the back panel of the
machine. The upper orange LED shows Speed status. The lower green LED shows Link/Activity
(Received/Transmit) status.
„ The upper LED is orange: The Speed LED will be orange if the print server is connected to a
100BASE-TX Fast Ethernet network.
„ The upper LED is off: The Speed LED will be off if the print server is connected to a 10BASE-T
Ethernet network.
„ The lower LED is green: The Link/Activity LED will be green if the print server is connected to a
Ethernet network.
„ The lower LED is off: The Link/Activity LED will be off if the print server is not connected to the
network.
15
178
Troubleshooting
For wireless network users (For HL-3070CW):
Note
Make sure that your machine setting for a wireless network is enable.
Check to see if the wireless signal on the LCD display is following in Ready mode or Sleep mode with
infrastructure mode:
(Strong) /
(Medium) /
(Weak)
Your machine is connected to the wireless network.
If the signal is
(None), your machine is not connected to the wireless network. To configure your
machine for a wireless network, see Configuring your machine for a wireless network (For HL3070CW) in Chapter 3.
Note
The wireless signal will be on the LCD display in the following status
even if your machine is not
connected to the wireless network:
• The wireless network is active with Ad-hoc mode.
• Your machine is connected to the access point with Open System authentication.
c
Print the Network Configuration page and check if the settings such as IP address settings are correct
for your network. The problem may be the result of a mismatched or duplicate IP address. Verify that the
IP address is correctly loaded into the print server. And make sure that no other nodes on the network
have this IP address. For information on how to print the Network Configuration page, see Printing the
Network Configuration page on page 123.
d
Verify that the print server is on your network as follows:
„ For Windows®
1 Click Start, All Programs 1, Accessories then choose Command Prompt.
1
Programs for Windows® 2000 users
2 Try pinging the print server from the host operating system command prompt with the command:
ping ipaddress
Where ipaddress is the print server IP address (note that in some instances it can take up to two
minutes for the print server to load its IP address after setting the IP address).
„ For Mac OS X 10.3.9 or greater
1
2
3
4
e
From the Go menu, choose Applications.
Open the Utilities folder.
Double-click the Terminal icon.
Try pinging the print server from the Terminal window:
ping ipaddress
Where ipaddress is the print server IP address (note that in some instances it can take up to two
minutes for the print server to load its IP address after setting the IP address).
If you have tried a to d above and it does not work, then reset the print server back to its factory default
settings and try from the initial setup again. For resetting, see Reset the network settings to the factory
default on page 122.
179
15
Troubleshooting
f
If the installation failed, the Firewall on your computer may be blocking the necessary network
connection to the machine. In this case, you will need to disable the Firewall on your computer and
re-install the drivers. For more information, see General problems on page 176. If you are using personal
Firewall software, see the User’s Guide for your software or contact the software manufacturer.
15
180
Troubleshooting
Printing problems
15
Print job is not printed.
15
Check the status and configuration of the print server.
a
b
Make sure that the machine is powered on, is on-line and ready to print.
c
Verify that the print server is on your network as follows:
Print the Network Configuration page of the machine and check if the settings such as IP address
settings are correct for your network. The problem may be the result of mismatched or duplicate IP
address. Verify that the IP address is correctly loaded into the print server, and make sure that no other
nodes on the network have this IP address. For information on how to print the Network Configuration
page, see Printing the Network Configuration page on page 123.
„ For Windows®
1 Click Start, All Programs 1, Accessories then choose Command Prompt.
1
Programs for Windows® 2000 users
2 Try pinging the print server from the host operating system command prompt with the command:
ping ipaddress
Where ipaddress is the print server IP address (note that in some instances it can take up to two
minutes for the print server to load its IP address after setting the IP address).
3 If a successful response is received, then proceed to Windows® 2000/XP, Windows Vista® and
Windows Server® 2003/2008 IPP troubleshooting on page 182. Otherwise, proceed to d.
„ For Mac OS X 10.3.9 or greater
1
2
3
4
From the Go menu, choose Applications.
Open the Utilities folder.
Double-click the Terminal icon.
Try pinging the print server from the Terminal window:
ping ipaddress
Where ipaddress is the print server IP address (note that in some instances it can take up to two
minutes for the print server to load its IP address after setting the IP address).
5 If a successful response is received, then proceed to d.
d
If you have tried a to c above and it does not work, then reset the print server back to its factory default
settings and try from the initial setup again. For resetting, see Reset the network settings to the factory
default on page 122.
Error during printing
15
15
If you try to print while other users are printing large amounts of data (e.g. many pages or color pages with
high resolution), the machine is unable to accept your print job until the ongoing printing is finished. If the
waiting time of your print job exceeds a certain limit, a time out situation occurs, which causes the error
message. In such situations, execute the print job again after the other jobs are completed.
181
Troubleshooting
Protocol-specific troubleshooting
15
Windows® 2000/XP, Windows Vista® and Windows Server® 2003/2008 IPP
troubleshooting
15
I want to use a different Port number other than 631.
15
If you are using Port 631 for IPP printing, you may find that your firewall may not let the print data through. If
this is the case, use a different port number (port 80), or configure your Firewall to allow Port 631 data
through.
To send a print job using IPP to a printer using Port 80 (the standard HTTP port) enter the following when
configuring your Windows® 2000/XP, Windows Vista® and Windows Server® 2003/2008 system.
http://ipaddress/ipp
The “Go to printer’s website” option in Windows® XP and Windows Vista® is not working. The “Get
More Info” option in Windows® 2000 and Windows Server® 2003/2008 is not working.
15
If you are using a URL of:
http://ipaddress:631 or http://ipaddress:631/ipp,
the Get More Info option in Windows® 2000/XP, Windows Vista® and Windows Server® 2003/2008 will not
function. if you wish to use the Get More Info option, use the following URL:
http://ipaddress
This will then force Windows® 2000/XP, Windows Vista® and Windows Server® 2003/2008 to use Port 80 to
communicate with the Brother print server.
Web Based Management (web browser) troubleshooting (TCP/IP)
15
a
If you cannot connect to the print server using your web browser it may be worth checking the Proxy
Settings of your browser. Look in the Exceptions setting and if necessary, type in the IP address of the
print server. This will stop your computer from trying to connect to your ISP or proxy server every time
you wish to look at the print server.
b
Make sure that you are using the proper web browser, we recommend Microsoft® Internet Explorer® 6.0
(or greater) or Firefox 1.0 (or greater) for Windows® and Safari 1.3 (or greater) for Macintosh. Please
also make sure that JavaScript and Cookies are always enabled in whichever browser you use. If a
different web browser is used, make sure it is compatible with HTTP 1.0 and HTTP 1.1.
182
15
Troubleshooting
Wireless network troubleshooting (For HL-3070CW)
15
Note
If you want to confirm the wireless network status, see b on page 178.
Wireless setup problems
15
The Brother print server is not found during setup by the Wireless Device Setup Wizard.
15
a
b
Make sure that the machine is powered on, is on-line and ready to print.
c
Reset the print server back to its factory default settings and try the wireless setup again (see Reset the
network settings to the factory default on page 122).
Move your Brother machine closer to your access point/router (or your computer for Ad-hoc) and try
again.
Why do I have to change my machine’s network setting to “Wired LAN” during setup although I am
trying to setup Wireless LAN?
15
If you are using Windows® 2000 / Mac OS X 10.3.9 or greater, your computer is connected to the wireless
network using a network cable, it is recommended you temporarily connect the machine to your access
point/router, hub or router using a network cable. You will also need to change your machine’s network setting
to wired LAN temporarily. Your machine’s network setting will be changed to wireless LAN automatically
during the course of the setup.
„ For Windows®:
Configuration in Infrastructure mode on page 29
Configuration in Infrastructure mode using SES/WPS or AOSS from the control panel menu (without
network cable) on page 40
Configuration in Ad-hoc mode on page 46
„ For Macintosh:
Configuration in Infrastructure mode on page 60
Configuration in Infrastructure mode using SES/WPS or AOSS from the control panel menu (without
network cable) on page 70
15
Configuration in Ad-hoc mode on page 76
183
Troubleshooting
Wireless connection problem
15
The wireless network connection is sometimes disabled.
15
The wireless network connection status is affected by the environment where the Brother printer and other
wireless devices are located. The following conditions may cause connection problems:
„ A concrete or metal framed wall is installed between the Brother machine and the access point/router.
„ Electric appliances such as televisions, computer appliances, microwave ovens, intercoms,
mobile/cellular phones and the battery chargers and AC power adapters are installed close to your
network.
„ A broadcast station or high-tension wire is located close to your network.
„ A nearby fluorescent light is being switching on or off.
15
184
AppendixA
A
Appendix
A
A
Using services
0
A service is a resource that can be accessed by computers that wish to print to the Brother print server. The
Brother print server provides the following predefined services (do a SHOW SERVICE command in the
Brother print server remote console to see a list of available services): Enter HELP at the command prompt
for a list of supported commands.
Service (Example)
Definition
BINARY_P1
TCP/IP binary
TEXT_P1
TCP/IP text service (adds carriage return after each line feed)
PCL_P1
PCL service (switches PJL-compatible printer to PCL mode)
BRNxxxxxxxxxxxx
TCP/IP binary
BRNxxxxxxxxxxxx_AT
PostScript® service for Macintosh
POSTSCRIPT_P1
PostScript® service (switches PJL-compatible printer to PostScript® mode)
Where "xxxxxxxxxxxx" is your machine's MAC Address (Ethernet Address).
Other ways to set the IP address (For advanced users and
administrators)
0
For information on how to configure your machine for a network using the BRAdmin Light utility or Web Based
Management (web browser), see Setting the IP address and subnet mask on page 13.
Using DHCP to configure the IP address
0
The Dynamic Host Configuration Protocol (DHCP) is one of several automated mechanisms for IP address
allocation. If you have a DHCP server in your network, the print server will automatically obtain its IP address
from DHCP server and register its name with any RFC 1001 and 1002-compliant dynamic name services.
Note
If you do not want your print server configured via DHCP, BOOTP or RARP, you must set the Boot Method
to static so that the print server has a static IP address. This will prevent the print server from trying to obtain
an IP address from any of these systems. To change the Boot Method, use the machine’s control panel
Network menu, BRAdmin applications or Web Based Management (web browser) .
185
Appendix
Using BOOTP to configure the IP address
0
BOOTP is an alternative to rarp that has the advantage of allowing configuration of the subnet mask and
gateway. In order to use BOOTP to configure the IP address make sure that BOOTP is installed and running
on your host computer (it should appear in the /etc/services file on your host as a real service;
typemanbootpd or refer to your system documentation for information). BOOTP is usually started up via the
/etc/inetd.conf file, so you may need to enable it by removing the “#“ in front of the bootp entry in that
file. For example, a typical bootp entry in the /etc/inetd.conf file would be:
#bootp dgram udp wait /usr/etc/bootpd bootpd -i
Depending on the system, this entry might be called “bootps” instead of “bootp”.
Note
In order to enable BOOTP, simply use an editor to delete the “#” (if there is no “#”, then BOOTP is already
enabled). Then edit the BOOTP configuration file (usually /etc/bootptab) and enter the name, network
type (1 for Ethernet), MAC Address (Ethernet Address) and the IP address, subnet mask and gateway of
the print server. Unfortunately, the exact format for doing this is not standardized, so you will need to refer
to your system documentation to determine how to enter this information (many UNIX systems also have
template examples in the bootptab file that you can use for reference). Some examples of typical
/etc/bootptab entries include: (“BRN” below is “BRW” for a wireless network.)
BRN008077310107 1 00:80:77:31:01:07 192.189.207.3
and:
BRN008077310107:ht=ethernet:ha=008077310107:\ip=192.189.207.3:
Certain BOOTP host software implementations will not respond to BOOTP requests if you have not included
a download filename in the configuration file. If this is the case, simply create a null file on the host and specify
the name of this file and its path in the configuration file.
As with RARP, the print server will load its IP address from the BOOTP server when the printer is powered on.
186
A
Appendix
Using RARP to configure the IP address
0
A
The Brother print server’s IP address can be configured using the Reverse ARP (RARP) facility on your host
computer. This is done by editing the /etc/ethers file (if this file does not exist, you can create it) with an
entry similar to the following:
00:80:77:31:01:07 BRN008077310107 (or BRW008077310107 for a wireless network)
Where the first entry is the MAC Address (Ethernet Address) of the print server and the second entry is the
name of the print server (the name must be the same as the one you put in the /etc/hosts file).
If the RARP daemon is not already running, start it (depending on the system the command can be rarpd,
rarpd -a, in.rarpd -a or something else; type man rarpd or refer to your system documentation for
additional information). To verify that the RARP daemon is running on a Berkeley UNIX based system, type
the following command:
ps -ax | grep -v grep | grep rarpd
For AT&T UNIX-based systems, type:
ps -ef | grep -v grep | grep rarpd
The Brother print server will get the IP address from the RARP daemon when the printer is powered on.
Using APIPA to configure the IP address
0
The Brother print server supports the Automatic Private IP Addressing (APIPA) protocol. With APIPA, DHCP
clients automatically configure an IP address and subnet mask when a DHCP server is not available. The
device chooses it's own IP address in the range 169.254.1.0 through to 169.254.254.255. The subnet mask
is automatically set to 255.255.0.0 and the gateway address is set to 0.0.0.0.
By default, the APIPA protocol is enabled. If you want to disable the APIPA protocol, see Changing the print
server settings on page 16.
If the APIPA protocol is disabled, the default IP address of a Brother print server is 192.0.0.192. However,
you can easily change this IP address number to match with the IP address details of your network.
187
Appendix
Using ARP to configure the IP address
0
If you are unable to use the BRAdmin application and your network does not use a DHCP server, you can
also use the ARP command. The ARP command is available on Windows® systems that have TCP/IP
installed as well as UNIX systems. To use arp enter the following command at the command prompt:
arp -s ipaddress ethernetaddress
Where ethernetaddress is the MAC Address (Ethernet Address) of the print server and ipaddress is
the IP address of the print server. For example:
„ Windows® systems
Windows® systems require the dash “-” character between each digit of the MAC Address (Ethernet
Address).
arp -s 192.168.1.2 00-80-77-31-01-07
„ UNIX/Linux systems
Typically, UNIX and Linux systems require the colon “:” character between each digit of the MAC Address
(Ethernet Address).
arp -s 192.168.1.2 00:80:77:31:01:07
Note
You must be on the same Ethernet segment (that is, there cannot be a router between the print server and
operating system) to use the arp -s command.
If there is a router, you may use BOOTP or other methods described in this chapter to enter the IP address.
If your Administrator has configured the system to deliver IP addresses using BOOTP, DHCP or RARP your
Brother print server can receive an IP address from any one of these IP address allocation systems. In
which case, you will not need to use the ARP command. The ARP command only works once. For security
reasons, once you have successfully configured the IP address of a Brother print server using the ARP
command, you cannot use the ARP command again to change the address. The print server will ignore any
attempts to do this. If you wish to change the IP address again, use Web Based Management (web
browser), TELNET (using the SET IP ADDRESS command) or factory reset the print server (which will then
allow you to use the ARP command again).
To configure the print server and to verify the connection, enter the following command ping ipaddress
where ipaddress is the IP address of the print server. For example, ping 192.189.207.2.
188
A
Appendix
Using the TELNET console to configure the IP address
0
A
You can also use the TELNET command to change the IP address.
TELNET is an effective method to change the machine’s IP address. But a valid IP address must already be
programmed into the print server.
Type TELNET ipaddress at the command prompt of the system prompt, where ipaddress is the IP
address of the print server. When you are connected, push the Return or Enter key to get the “#” prompt.
Enter the password “access” (the password will not appear on the screen).
You will be prompted for a user name. Enter anything in response to this prompt.
You will then get the Local> prompt. Type SET IP ADDRESS ipaddress, where ipaddress is the
desired IP address you wish to assign to the print server (check with your network administrator for the IP
address to use). For example:
Local> SET IP ADDRESS 192.168.1.3
You will now need to set the subnet mask by typing SET IP SUBNET subnet mask, where subnet mask
is the desired subnet mask you wish to assign to the print server (check with your network administrator for
the subnet mask to use). For example:
Local> SET IP SUBNET 255.255.255.0
If you do not have any subnets, use one of the following default subnet masks:
255.0.0.0 for class A networks
255.255.0.0 for class B networks
255.255.255.0 for class C networks
The leftmost group of digits in your IP address can identify the type of network you have. The value of this
group ranges from 1 through 127 for Class A networks (e.g., 13.27.7.1), 128 through 191 for Class B networks
(e.g.,128.10.1.30), and 192 through 255 for Class C networks (e.g., 192.168.1.4).
If you have a gateway (router), enter its address with the command SET IP ROUTER routeraddress,
where routeraddress is the desired IP address of the gateway you wish to assign to the print server. For
example:
Local> SET IP ROUTER 192.168.1.4
Type SET IP METHOD STATIC to set the method of IP access configuration to static.
To verify that you have entered the IP information correctly, type SHOW IP.
Type EXIT or Ctrl-D (i.e., hold down the control key and type “D”) to end the remote console session.
189
Appendix
Using the Brother Web BRAdmin server software for IIS to configure the IP
address
0
The Web BRAdmin server software is designed to manage all LAN/WAN Brother network connected devices.
By installing the Web BRAdmin server software on a computer running IIS 1, administrators with a web
browser can connect to the Web BRAdmin server, which then communicates with the device itself. Unlike the
BRAdmin Professional 3 utility, which is designed for Windows® systems only, the Web BRAdmin server
software can be accessed from any client computer with a web browser that supports Java.
Please note this software is not included on the CD-ROM that was supplied with your Brother product.
Please visit http://solutions.brother.com/ to learn more about this software and to download it.
1
Internet Information Server 4.0 or Internet Information Services 5.0/5.1/6.0/7.0
190
A
Appendix
Installation when using a Network Print Queue or Share
0
A
Note
If you are going to connect to a shared printer on your network, we recommend that you ask your system
administrator about the queue or share name for the printer prior to installation.
Installing the driver and choosing the correct printer queue or share name
a
Turn on your computer. (You must be logged on with Administrator rights.)
Close any applications running before configuration.
b
Put the supplied CD-ROM into your CD-ROM drive. The opening screen will appear automatically.
Choose your printer model and the language.
c
Click Install Printer Driver on the menu screen.
0
Note
Choose the Install Printer Driver icon for your region.
d
Click Network cable users.
Note
For Windows Vista®, when the User Account Control screen appears, click Continue.
e
f
g
When the License Agreement window appears, click Yes if you agree to the License Agreement.
Choose Network Shared Printer, and then click Next.
Choose your printer's queue, and then click OK.
Note
Contact your administrator if you do not know the location or the name of the printer in the network.
h
Click Finish.
Note
• If you want to register your product on-line, check On-Line Registration.
• If you do not want to set your printer as Default printer, uncheck Set as Default Printer.
• If you want to disable status monitor, uncheck Enable Status Monitor.
Setup is now complete.
191
Appendix
Installation when using Web Services
(For Windows Vista® users)
A
0
Note
• You must configure the IP address on your machine before you proceed with this section. If you have
not configured the IP address, see Setting the IP address and subnet mask on page 13 first.
• Verify the host computer and print server are either on the same subnet, or that the router is properly
configured to pass data between the two devices.
a
b
Click the
button, then choose Network.
The machine’s Web Services Name will be shown with the printer icon. Right-click the machine you want
to install.
Note
The Web Services Name for the Brother machine is your model name and the MAC Address (Ethernet
Address) of your machine (e.g. Brother HL-XXXX [XXXXXXXXXXXX]).
c
d
Click Install.
e
f
g
Choose Locate and install driver software (recommended).
h
Choose your CD-ROM drive, and then the install \ your language \ PCL \ win2kxpvista 1 folder.
When the User Account Control screen appears, do the following.
„ Users who have administrator rights: Click Continue.
„ For users who do not have administrator rights: Enter the administrator password and click OK.
Insert Brother CD-ROM.
Choose Don’t search online and then Browse my computer for driver software (advanced) on your
computer.
1
i
win2kxpvista folder for 32-bit OS users and winxpx64vista64 folder for 64-bit OS users
Click Next to begin installation.
192
AppendixB
B
Appendix
B
Print server specifications
0
B
Ethernet wired network
Network node
name
LAN
Support for
Protocols
Network type
Management
utilities
0
NC-6700h
You can connect your machine to a network for Network Printing.
Windows® 2000 Professional, Windows® XP, Windows® XP Professional x64 Edition,
Windows Vista®, Windows Server® 2003, Windows Server® 2003 x64 Edition and
Windows Server® 2008
Mac OS X 10.3.9 or greater 1
IPv4:
ARP, RARP, BOOTP, DHCP, APIPA (Auto IP),
WINS/NetBIOS name resolution, DNS resolver, mDNS,
LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, IPP,
IPPS, FTP Server, SSL/TLS, POP before SMTP, SMTP-AUTH,
APOP, TELNET server, SNMPv1, SNMPv2c, SNMPv3,
HTTP/HTTPS server, TFTP client and server, SMTP client, ICMP,
WebServicesPrint, LLTD responder
2:
(Turned off as default) NDP, RA, DNS resolver, mDNS,
IPv6
LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, IPP,
IPPS, FTP server, SSL/TLS, POP before SMTP, SMTP-AUTH,
APOP, TELNET server, SNMPv1, SNMPv2c, SNMPv3,
HTTP/HTTPS server, TFTP client and server, SMTP client,
ICMPv6, WebServicesPrint, LLTD responder
Ethernet 10/100 BASE-TX Auto Negotiation (Wired LAN)
BRAdmin Light 3
BRAdmin Professional 3 4
Web BRAdmin 4 5
BRPrint Auditor 4 6
Web Based Management (web browser)
1
For the latest driver updates, visit http://solutions.brother.com/.
2
If you want to use the IPv6 protocol, visit http://solutions.brother.com/ for more information.
3
If you require more advanced printer management, use the latest Brother BRAdmin Professional 3 utility version that is available as a download
from http://solutions.brother.com/.
4
Web BRAdmin, BRAdmin Professional 3 and BRPrint Auditor are available as a download from http://solutions.brother.com/. They are for
Windows® only.
5
Client computers with a web browser supporting Java.
6
Available when using BRAdmin Professional 3 or Web BRAdmin with devices that are connected to your client PC via USB.
193
Appendix
Wireless network (for HL-3070CW)
Network board
model name
LAN
Support for
Protocols
Network type
Management
utilities
0
NC-7500w
You can connect your machine to a network for Network Printing.
Windows® 2000 Professional, Windows ® XP, Windows® XP Professional x64 Edition,
Windows Vista®, Windows Server® 2003, Windows Server® 2003 x64 Edition and
Windows Server® 2008
Mac OS X 10.3.9 or greater 1
IPv4:
ARP, RARP, BOOTP, DHCP, APIPA (Auto IP),
WINS/NetBIOS name resolution, DNS resolver, mDNS,
LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, IPP,
IPPS, FTP Server, SSL/TLS, POP before SMTP, SMTP-AUTH,
APOP, TELNET server, SNMPv1, SNMPv2c, SNMPv3,
HTTP/HTTPS server, TFTP client and server, SMTP client, ICMP,
WebServicesPrint, LLTD responder
2
(Turned
off as default) NDP, RA, DNS resolver, mDNS,
IPv6 :
LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, IPP,
IPPS, FTP server, SSL/TLS, POP before SMTP, SMTP-AUTH,
APOP, TELNET server, SNMPv1, SNMPv2c, SNMPv3,
HTTP/HTTPS server, TFTP client and server, SMTP client,
ICMPv6, WebServicesPrint, LLTD responder
IEEE 802.11 b/g (Wireless LAN)
BRAdmin Light 3
BRAdmin Professional 3 4
Web BRAdmin 4 5
BRPrint Auditor 4 6
Web Based Management (web browser)
2412-2472 MHz
USA/Canada
1-11
Japan
802.11b:1-14, 802.11g:1-13
Others
1-13
Communication Infrastructure, Ad-hoc (802.11b only)
mode
Data rates
802.11b
11/5.5/2/1 Mbps
802.11g
54/48/36/24/18/12/11/9/6/5.5/2/1 Mbps
Link distance
70m (233 ft.) at lowest data rate
Frequency
RF channels
(The distance rate will vary upon environment and other equipment location.)
Network security 128 (104) / 64 (40) bit WEP, WPA-PSK (TKIP/AES), WPA2-PSK (AES), LEAP (CKIP),
EAP-FAST (TKIP/AES)
Setup support
SecureEasySetup™, Wi-Fi Protected Setup, AOSS™
utilities
1
For the latest driver updates, visit http://solutions.brother.com/.
2
If you want to use the IPv6 protocol, visit http://solutions.brother.com/ for more information.
194
B
Appendix
3
If you require more advanced printer management, use the latest Brother BRAdmin Professional 3 utility version that is available as a download
from http://solutions.brother.com/.
4
Web BRAdmin, BRAdmin Professional 3 and BRPrint Auditor are available as a download from http://solutions.brother.com/. They are for
Windows® only.
B
5
Client computers with a web browser supporting Java.
6
Available when using BRAdmin Professional 3 or Web BRAdmin with devices that are connected to your client PC via USB.
Function table and factory default settings
0
The factory default settings are shown in Bold with asterisks.
(HL-3040CN)
Level one
Network
Level two
Level three
TCP/IP
Options
Boot Method
Auto* , Static , RARP , BOOTP , DHCP
IP Address
[000-255] . [000-255] . [000-255] . [000-255]
[000-000] . [000-000] . [000-000] . [000-000]*
Subnet Mask
[000-255] . [000-255] . [000-255] . [000-255]
[000-000] . [000-000] . [000-000] . [000-000]*
[000-255] . [000-255] . [000-255] . [000-255]
Gateway
[000-000] . [000-000] . [000-000] . [000-000]*
IP Boot Tries 0 to 32767
3*
APIPA
On*, Off
IPv6
On , Off*
Ethernet
-
Auto* , 100B-FD , 100B-HD , 10B-FD , 10B-HD
Factory Reset
-
Restart Printer?
(HL-3070CW)
Level one
Network
Level two
Level three
Wired LAN TCP/IP
Level four
Options
Boot Method
Auto* , Static , RARP , BOOTP , DHCP
IP Address
[000-255] . [000-255] . [000-255] . [000255]
[000-000] . [000-000] . [000-000] . [000000]*
Subnet Mask
[000-255] . [000-255] . [000-255] . [000255]
[000-000] . [000-000] . [000-000] . [000000]*
Gateway
[000-255] . [000-255] . [000-255] . [000255]
[000-000] . [000-000] . [000-000] . [000000]*
195
Appendix
Level one
Network
Level two
Level three
Wired LAN TCP/IP
WLAN
Level four
Options
IP Boot
Tries
0 to 32767
APIPA
On* , Off
IPv6
On , Off*
3*
B
Ethernet
-
Auto* , 100B-FD , 100B-HD , 10B-FD , 10BHD
Set to Default
-
OK?
Wired Enable
-
On*, Off
TCP/IP
Boot Method
Auto* , Static , RARP , BOOTP , DHCP
IP Address
[000-255] . [000-255] . [000-255] . [000255]
[000-000] . [000-000] . [000-000] . [000000]*
Subnet Mask
[000-255] . [000-255] . [000-255] . [000255]
[000-000] . [000-000] . [000-000] . [000000]*
Gateway
[000-255] . [000-255] . [000-255] . [000255]
[000-000] . [000-000] . [000-000] . [000000]*
0 to 32767
APIPA
On* , Off
IPv6
On , Off*
3*
SES/WPS/AOSS
-
See Wireless configuration using SES/WPS or
AOSS from the control panel (For HL3070CW) in Chapter 6.
WPS w/PIN Code
-
See Wireless configuration using the PIN
Method of Wi-Fi Protected Setup (For HL3070CW) in Chapter 7.
WLAN Status
Factory
Reset
IP Boot
Tries
Status
See Status on page 118.
Signal
See Signal on page 119.
Channel
See Channel on page 119.
Speed
See Speed on page 120.
SSID
See SSID on page 120.
Comm. Mode
See Comm. Mode on page 121.
Set to Default
-
OK?
WLAN Enable
-
On , Off*
-
Restart Printer?
-
196
AppendixC
C
Appendix
C
Open Source Licensing Remarks
0
OpenSSL statements
0
OpenSSL License
0
Copyright © 1998-2005 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that
the following conditions are met:
1) Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
2) Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
3) All advertising materials mentioning features or use of this software must display the following
acknowledgment: "This product includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit. (http://www.openssl.org/)"
4) The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products
derived from this software without prior written permission. For written permission, please contact [email protected]
5) Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their
names without prior written permission of the OpenSSL Project.
6) Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes
software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)"
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young ([email protected]). This product
includes software written by Tim Hudson ([email protected]).
197
C
Appendix
Original SSLeay License
0
Copyright © 1995-1998 Eric Young ([email protected]) All rights reserved.
This package is an SSL implementation written by Eric Young ([email protected]). The implementation was
written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared
to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc.,
code; not just the SSL code. The SSL documentation included with this distribution is covered by the same
copyright terms except that the holder is Tim Hudson ([email protected]).
Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this
package is used in a product, Eric Young should be given attribution as the author of the parts of the library
used. This can be in the form of a textual message at program startup or in documentation (online or textual)
provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that
the following conditions are met:
1) Redistributions of source code must retain the copyright notice, this list of conditions and the following
disclaimer.
2) Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
3) All advertising materials mentioning features or use of this software must display the following
acknowledgement: "This product includes cryptographic software written by Eric Young
([email protected])" The word 'cryptographic' can be left out if the rouines from the library being used
are not cryptographic related :-).
4) If you include any Windows specific code (or a derivative thereof) from the apps directory (application
code) you must include an acknowledgement: "This product includes software written by Tim Hudson
([email protected])"
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be
changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU
Public Licence.]
198
C
Appendix
Part of the software embedded in this product is gSOAP software.
0
Portions created by gSOAP are Copyright (C) 2001 2004 Robert A. van Engelen, Genivia inc. All Rights
Reserved.
THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY GENIVIA INC AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANYWAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This product includes SNMP software from WestHawk Ltd.
C
0
Copyright (C) 2000, 2001, 2002 by Westhawk Ltd
Permission to use, copy, modify, and distribute this software for any purpose and without fee is hereby
granted, provided that the above copyright notices appear in all copies and that both the copyright notice and
this permission notice appear in supporting documentation. This software is provided "as is" without express
or implied warranty.
199
D
Index
A
G
Ad-hoc mode .................................................. 6, 23, 24
AES ........................................................................... 20
AOSS ..................................................... 26, 40, 70, 88
APIPA ........................................................ 7, 114, 187
APOP ...................................................................... 146
ARP ......................................................................... 188
Authentication ........................................................... 19
Gateway .................................................................. 112
B
BINARY_P1 ............................................................ 185
BOOTP ...................................................... 7, 109, 186
BRAdmin Light ........................................... 1, 2, 13, 16
BRAdmin Professional 3 .......................... 1, 2, 16, 151
BRNxxxxxxxxxxxx ................................................... 185
BRNxxxxxxxxxxxx_AT ............................................ 185
Brother accessories and supplies ...............................iv
BRPrint Auditor ........................................................... 3
C
CA ...................................................................145, 158
Certificate ........................................................145, 158
Channel ..................................................................... 19
CKIP .......................................................................... 20
Control panel ............................................................. 17
CSR ........................................................................ 145
Custom Raw Port ........................................................ 8
H
HTTP ........................................................................... 9
HTTPS .................................................................... 148
I
Infrastructure mode ........................................ 6, 22, 24
Internet printing ...................................................1, 136
IP address ................................................................. 10
IP Boot Tries ........................................................... 113
IPP ......................................................................8, 136
IPPS ................................................................146, 155
IPv6 .....................................................................9, 115
L
LEAP ......................................................................... 20
LLMNR ........................................................................ 8
LLTD ........................................................................... 9
LPR/LPD ..................................................................... 8
M
MAC Address .......................................................... 123
mDNS ......................................................................... 8
D
N
DHCP ......................................................... 7, 109, 185
Digital signature ...................................................... 145
DNS ...........................................7, 147, 148, 156, 158
Driver Deployment Wizard ..................................1, 124
Network Configuration Page ................................... 123
Network Key .............................................................. 21
Network printing ...................................................... 132
Network Shared printing ............................................. 5
E
O
EAP-FAST ................................................................ 20
Encryption ................................................................. 19
Ethernet .................................................................. 116
Open Source Licensing Remarks ........................... 197
Open System ............................................................ 19
Operating Systems ..................................................... 1
F
P
Factory default ........................................................ 122
Factory Reset .......................................................... 116
Firewall ............................................................176, 180
Password ................................................................ 136
PCL_P1 ................................................................... 185
Peer-to-Peer ............................................................... 4
PIN Method .........................................................27, 98
Ping .................................................................179, 181
200
D
Index
POP before SMTP ..........................................146, 156
Port9100 ..................................................................... 8
POSTSCRIPT_P1 ................................................... 185
Print server setting .................................................... 16
Private Key .............................................................. 158
Protocol ...............................................................7, 147
Public key cryptosystem ......................................... 145
R
RARP ......................................................... 7, 109, 187
RFC 1001 ................................................................ 185
D
S
SecureEasySetup .................................. 26, 40, 70, 88
Security protocols ................................................... 146
Service .................................................................... 185
Set to Default .......................................................... 116
Shared Key ............................................................... 19
Shared key cryptosystem ........................................ 145
SMTP client ................................................................. 8
SMTP-AUTH ...................................................146, 156
SNMP .......................................................................... 8
SNMPv3 .................................................................. 146
Specifications .......................................................... 193
SSID (Service Set Identifier) ..................................... 19
SSL/TLS ..........................................................146, 158
Status Monitor ............................................................. 1
Subnet mask .....................................................11, 111
T
TCP/IP ................................................................7, 108
TCP/IP printing ........................................................ 132
Telnet ..................................................................8, 189
TEXT_P1 ................................................................ 185
TKIP .......................................................................... 20
Trademarks .................................................................. i
W
Web Based Management (web browser) ... 3, 147, 148
Web BRAdmin ............................................................ 3
Web browser (HTTP) ................................................ 17
Web server (HTTP) ..................................................... 9
Web server (HTTPS) .............................................. 146
Web services .............................................................. 9
WEP .......................................................................... 20
Wi-Fi Protected Setup ......................26, 40, 70, 88, 98
Wireless network ...................................................6, 18
WPA2-PSK ............................................................... 20
WPA-PSK ................................................................. 20
201
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement