Casio PX-310 User`s guide

Casio PX-310 User`s guide
ES
USER’S GUIDE
GUÍA DEL USUARIO
Please keep all information for future reference.
Guarde toda información para tener como referencia futura.
Safety Precautions
Before trying to use the piano, be sure to
read the separate “Safety Precautions”.
Precauciones de seguridad
Antes de intentar usar el piano, asegúrese
de leer las “Precauciones de seguridad”
separadas.
PX310ES1C
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases,
shall be placed on the apparatus.
The power indicator being unlit does not mean the apparatus is completely disconnected from the MAINS.
When you need to have the apparatus completely disconnected from the MAINS, you must unplug the power cord.
For that purpose, locate the apparatus in a way that secures easy access to the power cord.
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Important!
Please note the following important information before using this product.
• Before using the AD-12 Adaptor to power the unit, be sure to check the AC Adaptor for any damage first. Carefully
check the power cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor
that is seriously damaged.
• The product is not intended for children under 3 years.
• Use only CASIO AD-12 adaptor.
• The AC adaptor is not a toy.
• Be sure to disconnect the AC adaptor before cleaning the product.
This mark applies in EU countries only.
CASIO Europe GmbH
Bornbarch 10, 22848 Norderstedt, Germany
407A-E-002A
Contents
General Guide .......................... E-2
Attachment of the Score Stand .................. E-2
Recording to and Playing Back
from Song Memory ................. E-20
About the FUNCTION button ...................... E-3
Recording Your Keyboard Play................. E-21
Numeric Input Keys and +/– Keys .............. E-4
Playing Back from Song Memory ............. E-22
Playing Back All the demo Tunes ............... E-4
Deleting Song Memory Data .................... E-23
Power Supply ........................... E-4
Other Settings ........................ E-24
Using the AC Adaptor ................................. E-4
Adjusting Accompaniment Volume ........... E-24
Changing the Keyboard Touch ................. E-24
Connections ............................. E-5
Connecting Headphones ............................ E-5
Connecting an audio or musical
instrument amplifier .................................... E-5
Changing the Piano Key ........................... E-25
Changing the Pitch of the Piano to
Match Another Instrument ........................ E-25
Using Digital Piano Setup Memory ........... E-25
Connecting to a PEDAL Jack ..................... E-6
Using MIDI ................................................ E-25
Playing with Different Tones ..... E-7
Saving the Song Data You Download
from the Internet ....................................... E-26
Selecting and Playing a Tone ..................... E-7
Selecting Main Tones and Variation Tones ... E-7
Troubleshooting ..................... E-28
Selecting an Advanced Tone, GM Tone,
or Drum Set ................................................ E-7
Specifications......................... E-29
Adjusting the Brilliance of a Tone ............... E-8
Layering Two Tones .................................... E-8
Operational Precautions ....... E-30
Assigning Different Tones to the Left and
Right Sides of the Keyboard ....................... E-9
Locating the Unit ....................................... E-30
Using Tone Effects .................................... E-10
Lithium Battery .......................................... E-30
Care of the Unit ......................................... E-30
Using the Piano’s Pedals .......................... E-11
Playing Rhythms .................... E-12
Using Auto Accompaniment ...................... E-13
Playing Tunes You
Download from the Internet .... E-16
Practicing a Tune ...................................... E-17
Using Registration Memory .... E-18
Setting Control Key Chart ..... E-31
Appendix ..................................A-1
Tone List ..................................................... A-1
Rhythm List ................................................. A-2
Drum Assignment List ................................. A-3
Fingered Chord Chart ................................. A-4
MIDI Implementation Chart
What is registration memory? ................... E-18
Company and product names used in this
manual may be registered trademarks of others.
407A-E-003A
E-1
General Guide
Bottom
Back Panel
2
1
Left Side Panel
6
7
F
4
5
Attachment of the Score Stand
Insert the score stand into the slot at the top of the
digital piano as shown in the illustration.
8
0
E
3
9
A
GHI JKL
C
B
M
N
O
P
Q RS TU V
D
W
NOTE
• Each chapter of this manual starts with an illustration
of the piano’s console, which shows the buttons and
other controllers you need to operate.
FUNCTION
VOLUME
E-2
407A-E-004A
General Guide
1
PEDAL connector
H
SYNCHRO/FILL-IN button
2
DAMPER PEDAL jack
I
START/STOP, DEMO button
3
SOFT/SOSTENUTO PEDAL jack
J
RHYTHM, USER SONG button
4
LINE OUT R, L/MONO jacks
K
T1/L T2/R button
5
LINE IN R, L/MONO jacks
L
SONG MEMORY button
6
POWER button
M
Display screen
7
DC 12V jack
N
TRANSPOSE buttons
8
MIDI THRU/OUT/IN terminals
O
TUNE buttons
9
PHONES jacks
P
BRILLIANCE buttons
0
RHYTHM/SONG SELECT buttons
Q
ADVANCED TONES/GM TONES button
A
TEMPO buttons
R
VARIATION button
B
TONE buttons
S
SPLIT button
C
TONE SELECT buttons
T
REVERB, REVERB TYPE button
D
REGISTRATION buttons
U
CHORUS, CHORUS TYPE button
E
VOLUME knob
V
BANK button
F
FUNCTION button
W
STORE button
G
INTRO/ENDING button
NOTE
• Key, button, and other names are indicated in the text of this manual using bold type.
About the FUNCTION button
The FUNCTION button makes it possible to perform a variety of useful functions. Note the following general
information about using the FUNCTION button.
● An indicator lamp above the FUNCTION button flashes while it is depressed. The lamp goes out when you
release the FUNCTION button.
Flashing
Unlit
● The FUNCTION button is always used in combination with another button or keyboard key. You hold down
the FUNCTION button as you press another button or keyboard key.
• The indicator lamp above the button flashes for a few seconds at high speed to let you know that the setting is complete.
Example: “Adjusting the Brilliance of a Tone” on page E-8
● For details about all the keyboard key functions you can perform with the FUNCTION button, see “Setting
Control Key Chart” on page E-31.
407A-E-005A
E-3
General Guide
Numeric Input Keys and +/–
Keys
● For a moment after you hold down the FUNCTION
button and then press another button to activate a
function, you can use certain keyboard keys to input
numbers or to increase (+) and decrease (–) setting
values.
Playing Back All the demo Tunes
The following procedure plays back the demo tunes
in sequence.
1
While holding down the FUNCTION
button, press the DEMO button at the same
time.
• This starts sequential playback of the demo
tunes.
• You can play along with the demo tunes on the
keyboard, if you want. Tone assigned to the
keyboard is the one that is preset for the demo
tune that is playing.
● Since the keyboard keys operate as switches at this
time, notes do not sound when you press keyboard
keys.
2
Press the DEMO button again to stop demo
tune play.
See “To adjust the tempo” on page E-12 for an actual
example.
Power Supply
You can power this digital piano by plugging it into a
standard household power outlet.
Be sure you turn off power and unplug the power cord
from the electrical outlet whenever the digital piano
is not in use.
Using the AC Adaptor
Make sure that you use only the AC adaptor specified
for this digital piano.
Specified AC Adaptor: AD-12
● During Use
• Never pull on the cord with excessive force.
• Never repeatedly pull on the cord.
• Never twist the cord at the base of the plug or
connector.
• The power cord should not be stretched tight
while it is in use.
● During Movement
• Before moving the keyboard, be sure to unplug
the AC adaptor from the power outlet.
● During Storage
• Loop and bundle the power cord, but never wind
it around the AC adaptor.
[Left Side Panel]
DC 12V jack
AC adaptor AD-12
Note the following important precautions to avoid
damage to the power cord.
IMPORTANT!
• Make sure that the product is turned off before connecting
or disconnecting the AC adaptor.
• Using the AC adaptor for a long time can cause it to
become warm to touch. This is normal and does not
indicate malfunction.
AC outlet
E-4
407A-E-006A
Connections
IMPORTANT!
• Whenever connecting external equipment, first set the
VOLUME knob of the digital piano and the volume
controller of the external equipment to relatively low
volume settings. You can later adjust volume to the level
you want after connections are complete.
• Be sure also to refer to the documentation that comes with
the external equipment for its proper connection
procedures.
Playing Output from External
Equipment through the Piano’s
Speakers 1
LINE IN R jack input sounds through the piano’s right
speaker, while LINE IN L/MONO jack input sounds
through the left speaker. Connecting to the LINE IN
L/MONO jack only causes the same output to be
produced from both speakers. It is up to you to
purchase connecting cables that are compatible with
the equipment you are connecting.
Connecting Headphones
Connect commercially available headphones to the
digital piano’s PHONES jacks. This cuts off the builtin speakers, which means you can practice even late
at night without disturbing others. To protect your
hearing, make sure that you do not set the volume
level too high when using headphones.
[Left Side Panel]
PHONES jacks
Connecting to Audio Equipment 2
Use commercially available cables to connect the
external audio equipment to the piano’s LINE OUT
jacks as shown in Figure 2. LINE OUT R jack output
is right channel sound, while LINE OUT L/MONO
jack output is left channel sound. It is up to you to
purchase connecting cables like the ones shown in the
illustration for connection of audio equipment.
Normally in this configuration you must set the audio
equipment’s input selector to the setting that specifies
the terminal (such as AUX IN) to which the piano is
connected. Use the piano’s VOLUME knob to adjust
the volume level.
Connecting to a Musical Instrument
Amplifier 3
Headphones
Connecting an audio or
musical instrument amplifier
Connecting to an audio or musical instrument
amplifier provides even clearer, more powerful sound
through external speakers.
Use commercially available cables to connect the
amplifier to the piano’s LINE OUT jacks as shown in
Figure 3. LINE OUT R jack output is right channel
sound, while LINE OUT L/MONO jack output is left
channel sound. Connecting to the LINE OUT L/
MONO jack only outputs a mixture of both channels.
It is up to you to purchase connecting cable like the
one shown in the illustration for connection of the
amplifier. Use the piano’s VOLUME knob to adjust
the volume level.
Audio amplifier AUX IN, etc.
PIN plugs
RIGHT
(Red)
LEFT
(White)
Standard jacks
INPUT 1
INPUT 2
Standard plug
Tape recorder,
MIDI sound
source
Guitar amplifier,
keyboard amplifier, etc.
407A-E-007A
E-5
Connections
Connecting to a PEDAL Jack
Depending on the type of operation you want the
pedal (SP-3) to perform, connect the pedal’s cable to
the digital piano’s PEDAL DAMPER jack or PEDAL
SOFT/SOSTENUTO jack. If you want to use both
jacks at the same time, you need to purchase another
optionally available pedal.
See “Using the Piano’s Pedals” on page E-11 for
information about using a pedal.
[Back Panel]
PEDAL jacks
SP-3
PEDAL connector
You can connect the optionally available Pedal Unit
(SP-30) to the PEDAL connector. You can then use the
pedals for expression that is similar to that available
on an acoustic piano.
[Bottom]
PEDAL connector
Accessories and Options
Use only the accessories and options specified for this
digital piano. Use of non-authorized items creates the
danger of fire, electric shock, and personal injury.
E-6
407A-E-008A
Playing with Different Tones
4
Selecting and Playing a Tone
Your piano has the following types of tones built in.
Main Tones
12
Variation Tones
12
Advanced Tones
40
GM Tones
128
Drum Sets
10
• This selects the variation tone assigned to each
TONE button.
Example: CLAVI
• For information about variation tone assigned
to each button, see the Tone List on page A-1.
5
To toggle between the main tone
(VARIATION indicator lamp off) and variation
tone (VARIATION indicator lamp on), press
the VARIATION button or the TONE button.
NOTE
Selecting Main Tones and
Variation Tones
1
Press the VARIATION button so the
indicator lamp above it is lit.
• Changing the main tone, variation tone or
advanced tone selection causes DSP* to switch
automatically to the default setting for the newly
selected tone. This causes any notes that are
sounding at the time of the change to be interrupted
momentarily. The DSP* will be set to the default
setting for the newly selected tone when the note
resumes. (*See page E-10)
Press the POWER button.
Selecting an Advanced Tone,
GM Tone, or Drum Set
POWER button
2
Use the VOLUME knob to adjust the
volume level.
3
Press one of the 12 TONE buttons to select
the tone you want.
• The names of the main tones are marked above
the TONE buttons.
Example: To select JAZZ ORGAN
You can use the following procedure to assign one of
the piano’s 40 Advanced Tones, 128 GM tones, or 10
drum sets to the ADVANCED TONES/GM TONES
button.
1
Press the ADVANCED TONES/GM TONES
button.
• This selects the tone that is currently assigned
to the ADVANCED TONES/GM TONES
button.
• The display continues to display the tune or
rhythm number.
2
Use the Tone List on page A-1 to find the
advanced tone, GM tone, or drum set
number you want.
Example: 008 (MARIMBA)
FUNCTION
VOLUME
407A-E-009B
TONE SELECT
BRILLIANCE
TONE
VARIATION
REVERB
SPLIT
ADVANCED
TONES/GM TONES
CHORUS
E-7
Playing with Different Tones
3
While holding down the FUNCTION
button, press the ADVANCED TONES/GM
TONES button. Remember to keep the
FUNCTION button depressed.
• This causes the tone number of the tone that is
currently assigned to the ADVANCED TONES/
GM TONES button to appear on the display.
Example: 080 (GM VIOLIN)
4
While holding down the FUNCTION
button, use the keyboard keys shown below
to input the tone number of the tone you
want to assign to the ADVANCED TONES/
GM TONES button.
Example: 008 (MARIMBA)
Selecting the ADVANCED TONES/GM
TONES Button Variation Tone
To assign a variation tone to the ADVANCED TONES/
GM TONES button, perform the steps under
“Selecting an Advanced tone, GM Tone, or Drum Set”
on page E-7. After step 1, however, press the
VARIATION button so the indicator lamp above it is
lit.
• After you assign a tone as the variation tone, you
can select it by pressing the ADVANCED TONES/
GM TONES button.
Adjusting the Brilliance of a Tone
You can adjust the clarity and sharpness of a tone to
suit your music and personal preferences.
1
Holding down the FUNCTION button,
press the BRILLIANCE buttons to adjust the
brilliance of a tone to the level that you
want.
• This displays the number of the assigned tone.
[
[
5
After inputting the tone number you want,
release the FUNCTION button to exit the
GM tone setting screen.
NOTE
• You can also select a tone by holding down the
ADVANCED TONES/GM TONES button as you
use the TONE SELECT [ ] and [ ] buttons to
scroll through tone numbers on the display.
• The tone that you assign to the ADVANCED
TONES/GM TONES button is retained until you
turn off the keyboard.
• If a drum set is assigned to the ADVANCED
TONES/GM TONES button, keyboard keys sound
drum sounds when you press them. See page A-3
for information about the drum sounds that are
assigned to each of the keyboard keys.
E-8
] : produces a more mellow sound
] : produces a brighter sound
• To return the brilliance setting to its initial
default, hold down the FUNCTION button and
press both of the BRILLIANCE buttons at the
same time.
Layering Two Tones
Use the following procedure to layer to two tones, so
they sound at the same time.
Of the two TONE buttons you press to layer two tones,
the one on the left is the main tone, while the one on
the right is the layered tone.
PREPARATION
• If you plan to use a variation tone, perform the procedure
on page E-7 to select the variation tone for the applicable
TONE button(s) before starting this procedure.
407A-E-010A
Playing with Different Tones
Simultaneously press the TONE buttons of
the two tones that you want to layer.
1
Example: Press GRAND PIANO 1 button and
STRINGS button at the same time.
Assigning Different Tones to the Left
and Right Sides of the Keyboard
You can assign different tones to keys on the left side
and the right side of the keyboard.
Split Point
• If the layer tone is a variation tone, the indicator
lamp above the VARIATION button will light.
1
GRAND PIANO 1
• The tones are now layered.
After you are finished using the layered
tones, press the one of the TONE buttons
again to unlayer them.
STRINGS
GRAND PIANO 1
Press the TONE button of the tone you want
to select for the high (right) range.
2
Press the SPLIT button.
3
Press the TONE button of the tone you want
to select for the low (left) range.
• Note that you cannot layer the main tone and
variation tone assigned to the same TONE button.
4
Adjusting the Volume Balance between
Two Layered Tones
While holding down the FUNCTION
button, use the keyboard keys shown below
to adjust the volume of the layered tones.
왗
• This causes the SPLIT indicator lamp to light.
• The keyboard is now split between the two
tones.
Example: STRINGS
NOTE
1
High Range
Example: GRAND PIANO 1
STRINGS
2
Low Range
After you are finished using the split
keyboard, press the SPLIT button again to
unsplit it.
• This causes the SPLIT indicator lamp to go out.
Specifying the Keyboard Tone Split Point
1
While holding down the SPLIT button,
press the keyboard key where you want the
left limit of the high range (right) tone to
be.
왘
Left limit of the high range
Flash
▲
C1
▲
C2
▲
C3
▲
C4
▲
C5
▲
C6
▲
C7
Low range High range
▲
C8
¥
£
Initial default (Center)
Volume of the layered tone
Volume of the main tone
• To return the volume setting to its initial default,
hold down the FUNCTION button and press
both of the keys at the same time.
NOTE
• The split point setting also controls the point where
the keyboard splits between the accompaniment
keyboard (pages E-14, 15) and the melody
keyboard. Moving the split point also affects the
sizes of the accompaniment keyboard and the
melody keyboard.
407A-E-011A
E-9
Playing with Different Tones
[Chorus]
Using Tone Effects
Reverb: Makes your notes resonate
Chorus: Adds more breadth to your notes
Turning Effects On and Off
1
Each press of the REVERB or CHORUS
button toggles the setting as shown below.
0: Chorus 1
1: Chorus 2
2: Chorus 3
3: Chorus 4
• You can determine the status of the effects by
checking the REVERB and CHORUS indicator
lamps.
Lit
About DSP
On
DSP makes it possible to digitally produce complex
acoustic effects.
The DSP is assigned to each tone whenever you turn
on digital piano power.
Unlit
Off
Turning DSP On and Off
1
Changing the Effect Type
There are four reverb and four chorus types.
1
Turn on the effect you want to change.
2
While holding down the FUNCTION
button, press the REVERB or CHORUS
button to cycle through the effect type
settings as shown below.
0: Room 1
E-10
On:
Off:
▲
C1
[Reverb]
1: Room 2
2: Hall 1
While holding down the FUNCTION
button, press one of the keyboard keys
shown below to turn DSP on or off.
▲
C2
▲
C3
▲
C4
▲
C5
▲
C6
▲
C7
▲
C8
3: Hall 2
407A-E-012B
Playing with Different Tones
NOTE
Selecting the Pedal Function
• Under initial default settings, DSP is on for the main
tone, and layer and split are turned off. DSP can be
applied to only one part as shown below.
Initial Defaults
Layer Tone DSP On
Split Tone DSP On
Main
Tone
On
Off
Off
Layer
Tone
Off
On
Off
Split
Tone
Off
Off
On
A pedal connected to the piano’s PEDAL jack can
operate as either a soft pedal or a sostenuto pedal.
When you turn on the keyboard, the pedal is initially
configured for soft pedal operation. You can perform
the following operation to select either soft or
sostenuto for the pedal operation.
1
• You can turn chorus on or off for each main tone,
layer tone, and split tone part.
• You cannot turn reverb on or off for each main tone,
layer tone, and split tone part.
While holding down the FUNCTION
button, use the keyboard keys shown below
to select either soft or sostenuto.
Sostenuto:
Soft:
Using the Piano’s Pedals
The digital piano is equipped with two pedal jacks, one
for a damper pedal and one for a soft/sostenuto pedal.
▲
C2
▲
C1
▲
C3
▲
C4
▲
C5
▲
C6
▲
C7
▲
C8
Adjusting the Effect Applied when the
Damper Pedal is Pressed Half Way
(With optional SP-30 only)
You can specify to what extent the damper effect
should be applied when you press the damper pedal
half way. A setting in the range of 0 (no effect) to 42
(same effect as full press) can be specified.
SP-3
• Soft Pedal
Pressing this pedal while playing weakens notes
played on the keyboard after the pedal was pressed,
and makes them sound softer.
• Sostenuto Pedal
Only the notes of the keys that are depressed when
this pedal is pressed are sustained until the pedal
is released.
407A-E-013A
1
While holding down the FUNCTION
button, press one of the keyboard keys
shown below to specify the setting you
want.
▲
▲
Pedal functions
• Damper Pedal
Pressing the damper pedal while playing will cause
the notes you play to reverberate for a very long
time. When GRAND PIANO 1 is selected as the
tone, using this pedal causes note to reverberate just
like the pedal on an acoustic grand piano.
▲
C1
▲
C2
▲
C3
▲
C4
▲
C5
▲
C6
▲
C7
▲
C8
왔 : Decreases the effect
왖 : Increases the effect
• To return the volume setting to its initial default,
hold down the FUNCTION button and press
both of the keys at the same time.
E-11
Playing Rhythms
You can select from among 120 built-in rhythms.
Rhythms 0 through 109 include percussion instrument
sounds, but rhythms 110 through 119 do not. See the
next page for information about how to use rhythms
110 through 119.
1
NOTE
• You can also cycle through the available rhythms
in step 2 by holding down the FUNCTION button
and pressing the RHYTHM/SONG SELECT [ ]
or [ ] button.
Press the RHYTHM button so the RHYTHM
indicator lamp (above the button) is lit.
• Each press of the button toggles between the
upper indicator lamp and lower indicator lamp.
• Pressing the two RHYTHM/SONG SELECT
buttons at the same time selects rhythm 0.
2
While holding down the FUNCTION
button, use the keyboard keys shown below
to input a rhythm number.
• If you want your accompaniment rhythm to
include percussion instrument sounds, select a
rhythm in the range of 0 through 109.
To adjust the tempo
1
While holding down the FUNCTION
button, use the TEMPO [ ] and [ ]
buttons to change the tempo (speed).
• To return to its standard tempo setting, press
the TEMPO [ ] and [ ] buttons at the same
time.
NOTE
3
Press the START/STOP button.
4
Press the START/STOP button again to stop
the rhythm.
• This starts the rhythm.
FUNCTION
INTRO/
ENDING
RHYTHM/SONG
SELECT
E-12
• You can also use keyboard keys to change the tempo
setting.
(1) While holding down the FUNCTION button,
press the TEMPO button.
(2) While keeping the FUNCTION button
depressed, use the keyboard keys shown below
to input a number.
* Tempo Range: 30 to 255
START/
STOP
SYNCHRO/ RHYTHM
FILL-IN
TEMPO
407A-E-014A
Playing Rhythms
Using Auto Accompaniment
With auto accompaniment, the keyboard
automatically plays rhythm, bass, and chord parts in
accordance with chords you select using simplified
keyboard fingerings, or chords you play. Auto
accompaniment makes it feel like you have your own
private backup group with you all the time.
2
Press the SYNCHRO/FILL-IN button.
3
Press the INTRO/ENDING button.
4
Use a CASIO CHORD fingering to play the
first chord within the accompaniment
keyboard range.
NOTE
• Rhythms 110 through 119 consist of chord
accompaniments only, without any drums or other
percussion instruments. These rhythms do not
sound unless CASIO CHORD, FINGERED, or
FULL RANGE CHORD is selected as the
accompaniment mode. With such rhythms, make
sure that CASIO CHORD, FINGERED, or FULL
RANGE CHORD is selected before you try playing
chords.
• Select the rhythm you want to use and adjust the tempo.
Select one of the three chord modes
(MODE).
1
• This configures the piano so accompaniment
starts with an intro pattern.
• This will cause the intro pattern for the selected
rhythm to play, followed by the auto
accompaniment rhythm and chord pattern.
5
Use CASIO CHORD fingerings to play
other chords.
• See “How to Play Chords” on page E-14 for
information about how to finger chords with
the various chord modes.
• You can insert a fill-in pattern while an auto
accompaniment is playing by pressing the
SYNCHRO/FILL-IN button. A fill-in helps to
change the mood of the auto accompaniment
pattern.
To play with auto accompaniment
PREPARATION
• This configures the piano so rhythm and chord
accompaniment will start automatically when
you press any keys within the accompaniment
keyboard range.
6
To stop auto accompaniment play, press the
INTRO/ENDING button.
• This will play an ending pattern for the selected
rhythm before stopping auto accompaniment
play.
NOTE
• You can start or stop auto accompaniment play
without an intro or ending pattern by pressing the
START/STOP button in steps 3 and 6.
• You can adjust the volume of auto accompaniment.
For more information see “Adjusting
Accompaniment Volume” on page E-24.
NORMAL:
CASIO CHORD:
FULL RANGE CHORD:
FINGERED:
• Here we will select the CASIO CHORD mode.
• See page E-14 for information about how to use
the chord modes.
407A-E-015A
E-13
Playing Rhythms
How to Play Chords
The way you finger chords depends on the current
chord mode.
Chord Types
CASIO CHORD accompaniment lets you play four
types of chords with minimal fingering.
Chord Types
■ Normal
In this mode there is no auto accompaniment, so you
can play all of piano’s keys for standard-fingering
chords or melody notes.
■ CASIO CHORD
This method of chord play makes it possible for
anyone to easily play chords, regardless of previous
musical knowledge and experience. The following
describes the CASIO CHORD “Accompaniment
keyboard” and “Melody keyboard”, and tells you how
to play CASIO CHORDs.
CASIO CHORD Accompaniment Keyboard and
Melody Keyboard
Accompaniment
keyboard
Melody keyboard
IMPORTANT!
• The accompaniment keyboard can be used for playing
chords only. No sound will be produced if you try playing
single melody notes on the accompaniment keyboard.
• The split point (page E-9) is the point that separates the
Auto Accompaniment area and the melody area of the
keyboard. You can change the location of the split point,
which also changes the sizes of the keyboard areas.
Example
Major chords
Press one accompaniment key.
Note that the chord produced
when
you
press
an
accompaniment keyboard key
does not change octave,
regardless of which key you use
to play it.
Minor chords (m)
To play a minor chord, keep the
major chord key depressed and
press any other accompaniment
keyboard key located to the right
of the major chord key.
Seventh chords (7)
To play a seventh chord, keep the
major chord key depressed and
press
any
other
two
accompaniment keyboard keys
located to the right of the major
chord key.
Minor seventh chords (m7)
To play a minor seventh chord,
keep the major chord key
depressed and press any other
three accompaniment keyboard
keys located to the right of the
major chord key.
C Major (C)
C C#DE E F F#GA A B B C C#DE E F
C minor (Cm)
C C#DE E F F#GA A B B C C#DE E F
C seventh (C7)
C C#DE E F F#GA A B B C C#DE E F
C minor seventh
(Cm7)
C C#DE E F F#GA A B B C C#DE E F
NOTE
• It makes no difference whether you press black or
white keys to the right of a major chord key when
playing minor and seventh chords.
■ FINGERED
In this mode, you specify chords by playing them as you
would on a piano, inside the accompaniment keyboard
range. To specify a C-chord, you would play C-E-G.
FINGERED Accompaniment Keyboard and Melody
Keyboard
Accompaniment
keyboard
E-14
Melody keyboard
407A-E-016A
Playing Rhythms
IMPORTANT!
• The accompaniment keyboard can be used for playing
chords only. No sound will be produced if you try playing
single melody notes on the accompaniment keyboard.
• The split point (page E-9) is the point that separates the
Auto Accompaniment area and the melody area of the
keyboard. You can change the location of the split point,
which also changes the sizes of the keyboard areas.
C
Cm
Cdim
■ FULL RANGE CHORD
This accompaniment method makes it possible to play
a total of 38 chord variations: the 15 available with
FINGERED plus 23 additional variations. The
keyboard interprets any input of three or more keys
that matches a FULL RANGE CHORD pattern to be a
chord. Any multi-key input that is not a FULL RANGE
CHORD pattern is interpreted as melody play. Because
of this, there is no need for a separate accompaniment
keyboard, and the entire keyboard from end-to-end
can be used for both melody and chords.
FULL RANGE CHORD Accompaniment Keyboard
and Melody Keyboard
Caug *1
Csus4
C7 *2
Accompaniment keyboard/Melody keyboard
Cm7 *2
Cmaj7 *2
Cm7 5
C7 5 *1
C7sus4
Cadd9
Cmadd9
CmM7 *2
Chords Recognized by This Piano
The following table identifies patterns that are
recognized as chords by FULL RANGE CHORD.
Pattern Type
Number of Chord Variations
FINGERED
The 15 chord patterns shown under
“FINGERED” on page E-14.
23 standard chord fingerings. The
following are examples of the 23
chords available with C as the bass
note.
Cdim7 *1
Standard
Fingerings
NOTE
• See the “Fingered Chord Chart” on page A-4 for
details on playing chords with other roots.
*1: Inverted fingerings cannot be used. The lowest
note is the root.
*2: The same chord can be played without pressing
the 5th G.
C6 • Cm6 • C69
D D
E
F
G
A
B
•
•
•
•
•
•
C C
C
C
C
C
C
B D m Dm Fm Gm Am B m
•
•
•
•
•
•
C
C
C C
C
C
C
Ddim A 7 F7 Fm7 Gm7 A add9
•
•
•
•
•
C
C
C C
C
C
C
Example: To play the chord C major and E .
1
E G
C
G
C
NOTE
• Except for the chords specified in note*1 above,
inverted fingerings (i.e. playing E-G-C or G-C-E
instead of C-E-G) will produce the same chords as
the standard fingering.
• Except for the exception specified in note*2 above,
all of the keys that make up a chord must be
pressed. Failure to press even a single key will not
play the desired FINGERED chord.
407A-E-017A
E
2
1 ..... Chord C
2 ..... Chord CC
E
NOTE
• If there are more than six semitones between the
lowest note and the next note to the right, the lowest
note is interpreted as a bass note.
E-15
Playing Tunes You Download from the Internet
You can save music data for up to 10 tunes you
download from the Internet to the digital piano’s user
song area (No. 0 through 9). Once you store a song in
digital piano memory, you can play it back using the
following procedure.
1
NOTE
• You can also cycle through the available tunes in
step 2 by holding down the FUNCTION button and
pressing the RHYTHM/SONG SELECT [ ] or
[ ] button.
Press the USER SONG button so the USER
SONG indicator lamp (below the button)
is lit.
• Each press of the button toggles between the
upper indicator lamp and lower indicator lamp.
• Pressing the two RHYTHM/SONG SELECT
buttons at the same time selects tune 0.
• You cannot use layer or split while playing a tune.
2
While holding down the FUNCTION
button, press the keyboard keys shown
below to input a tune number.
3
Press the START/STOP button.
4
Press the START/STOP button again to stop
tune playback.
• This starts the playback of the tune.
FUNCTION
START/
STOP
T1/L T2/R
RHYTHM/
USER SONG
SONG SELECT
E-16
407A-E-018A
Playing Tunes You Download from the Internet
Practicing a Tune
You can turn off the left hand part or right hand part
of the user song* and play along on the digital piano.
* With song data, the left-hand part is assigned to
MIDI Channel 3, while the right-hand part is
assigned to MIDI Channel 4.
PREPARATION
• Select the tune you want to practice and adjust the tempo
(See “To adjust the tempo” on page E-12).
• The maximum tempo setting for each tune is double the
initial default tempo of the tune.
• A number of tunes have tempo changes part way through
in order to produce specific musical effects.
1
Use the T1/L T2/R button to turn parts on
or off.
• The indicator lamps above the button show the
current on/off status of the parts.
2
Press the START/STOP button.
3
Play the missing part on the piano’s
keyboard.
4
Press the START/STOP button again to stop
song playback.
407A-E-019A
• This starts playback of the tune, without the
part you selected in step 1.
E-17
Using Registration Memory
What is registration memory?
Registration memory lets you save up to 32 (4 areas ×
8 banks) digital piano setups (tone, rhythm, tempo,
etc.) for instant recall whenever you need them.
How registration memory organizes
its data
Registration memory has four banks, and each bank
contains four areas. Use the BANK button to select a
bank, and the REGISTRATION buttons to select an
area.
Registration Memory Setup Data
The following are the settings that can be saved for
each registration memory setup.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Tone
Rhythm
Tempo
Layer setting
Split setting
Split point
Effect setting
DSP setting
Brilliance setting
Accompaniment Volume
Transpose setting
Pedal function setting
Damper pedal setting
SYNCHRO/FILL-IN button setting
MODE setting
NOTE
• All of the registration memory banks are preset
with default data.
• Registration memory functions are disabled while
you are using the User Song, Song Memory or
demo tune function.
1
Bank 1
2
1
2
3
4
1-1
1-2
1-3
1-4
Bank 2
2-1
2-2
2-3
2-4
Bank 3
3-1
3-2
3-3
3-4
Bank 4
4-1
4-2
4-3
4-4
Bank 5
5-1
5-2
5-3
5-4
Bank 6
6-1
6-2
6-3
6-4
Bank 7
7-1
7-2
7-3
7-4
Bank 8
8-1
8-2
8-3
8-4
1 Each press of the BANK button cycles through the
bank numbers, from 1 to 8.
2 Pressing a REGISTRATION button (1 to 4) selects
the corresponding area in the currently selected
bank.
NOTE
• Storing a new setup to a registration memory area
replaces the setup that was previous stored there.
STORE
BANK
E-18
REGISTRATION
407A-E-020A
Using Registration Memory
To store a setup in registration
memory
1
On the digital piano, configure the tone,
rhythm, and other settings you want to save
as your setup.
To recall a setup from registration
memory
1
• See “Registration Memory Setup Data” (page
E-18) for more information.
2
Example: Bank 1 selected
WARNING
• The following step will replace the setup currently in the
area you select with the new setup. Make sure you do not
need the current setup before performing the next step.
3
• This causes the number of the selected bank to
appear on the display for about two seconds. If
you do not perform the following step within
that time, the bank selection screen will
disappear.
Use the BANK button to select the
registration memory bank where you want
to save the setup.
• This causes the number of the selected bank to
appear on the display for about two seconds. If
you do not perform the following step within
that time, the bank selection screen will
disappear.
While holding down the STORE button,
press the REGISTRATION button (1 to 4)
that corresponds to the area where you
want to store the setup.
• You can also change the bank selection at this
time by pressing the BANK button while
holding down the STORE button.
Use the BANK button to select the
registration memory bank that contains the
setup you want to recall.
2
Press the REGISTRATION button (1 to 4)
for the area that contains setup you want
to recall.
NOTE
• If you press a REGISTRATION button without
selecting a bank first, the digital piano will recall
the setup from the applicable area in the bank you
previously last selected.
Registration memory contents are retained even
when you turn off digital piano power (page
E-25).
Example: After button 2 is pressed
4
407A-E-021A
Release the REGISTRATION and STORE
buttons.
E-19
Recording to and Playing Back from Song Memory
You can store the notes you play in Song Memory for
later playback.
NOTE
• You cannot use layer or split with Song Memory
record operation.
Tracks
The song memory of this piano records and plays back
notes much like a standard tape recorder. There are
two tracks, each of which can be recorded separately.
Besides notes, each track can be assigned its own tone
number. During playback you can adjust the tempo
to change the speed of playback.
Start
End
Auto Accompaniment
(rhythm, bass, chords), melody
Track 1
Melody
Track 2
Data recorded in track
Recorded Data Storage
This digital piano has a lithium battery to supply
power to retain memory contents even while power
is off.* The life of the lithium battery is five years after
the date of manufacture of the digital piano. Be sure
to contact your CASIO service provider about having
the lithium battery replaced every five years.
* Never turn off piano power while a record
operation is in progress.
IMPORTANT!
• If the data recorded in a single track uses up all the
available Song Memory capacity, you will not be able to
record anything in the other track.
• Recording new data to a track automatically deletes any
data previously stored in that track.
• Turning off power while a record operation is in progress
deletes anything recorded up to that point.
• CASIO COMPUTER CO., LTD. shall not be held
responsible for any losses by you or any third party due
to loss of data caused by malfunction or repair of this
digital piano, or by battery replacement.
Song Memory Capacity
• You can store a total of up to about 10,000 notes
(Track 1 + Track 2) in Song Memory.
• Recording stops automatically if the number of
notes in Song Memory exceeds the maximum while
you are recording. This is indicated by the REC
indicator lamp turning off.
SONG MEMORY Button Operation
Each press of the SONG MEMORY button cycles
through the functions shown below.
Playback
Standby
Record
Standby
Normal
Lit
Flash
Unlit
Other Song Memory Data
The following data is included when recording to Song
Memory: keyboard play, selected tone, tempo setting
(Track 1 only), pedal operations, reverb and chorus
settings, DSP on/off setting, brilliance setting,
accompaniment volume setting, selected rhythm
(Track 1 only), chord mode (Track 1 only), and intro/
fill-in/ending control (Track 1 only).
INTRO/
ENDING
START/
STOP
SYNCHRO/
FILL-IN
E-20
SONG MEMORY
T1/L T2/R
407A-E-022A
Recording to and Playing Back from Song Memory
Recording Your Keyboard Play
You can record to either track with or without playback
of the other track.
NOTE
• If you want to record to Track 2, press the T1/L
T2/R button here. This will cause the TRACK2/
RIGHT indicator lamp to flash, which indicates that
the piano is standing by for recording to Track 2.
To record to one track without playing
back the other
When recording a different tune to Track 2 after
recording to Track 1, make sure you carefully read the
notes under steps 1 and 2 before actually performing
the steps.
1
• If you want to use a rhythm and/or auto
accompaniment during recording (to Track 1
only), select the rhythm and chord mode.
3
Start playing something on the keyboard.
4
When you are finished, press the START/
STOP button to stop recording.
Press the SONG MEMORY button so the
PLAY indicator lamp is lit.
• If you are using a rhythm, you can stop
recording with an ending pattern by pressing
the INTRO/ENDING button.
• Stopping recording causes the REC indicator
lamp to go out, and indicator lamp above the
button of the track to which you recorded to
light.
• To play back the track you just recorded, press
the START/STOP button again.
• Select the tone and effects you want to use in
your recording, and configure the tempo
settings.
NOTE
• If you are recording a different tune to Track 2 after
recording to Track 1, press the T1/L T2/R button
to turn off the TRACK 1/ LEFT indicator lamp.
Unlit
• This will automatically start recording.
• Actually, there are a variety of different ways
to start the record operation. See “Starting the
Record Operation” below for more information.
5
After you are finished recording or playing
back, press the SONG MEMORY button so
the PLAY lamp or REC lamp turns off.
Lit
Starting the Record Operation
You can use any of the following methods to start a
record operation in step 2 of the above procedure.
2
Press the SONG MEMORY button so the
REC indicator lamp is flashing.
• At this time the TRACK 1/ LEFT indicator
lamp should also be flashing. This indicates that
the piano is standing by for recording to Track
1.
407A-E-023C
■ When recording to Track 1 with rhythm or auto
accompaniment
• Press the START/STOP button to start recording.
• Press the SYNCHRO/FILL-IN button to put the
piano into synchro start standby. Recording will
start when you finger a chord in the
accompaniment range of the keyboard.
• Press the INTRO/ENDING button to put the
piano into synchro start standby. Recording will
start and an intro pattern will play when you
finger a chord in the accompaniment range of the
keyboard.
E-21
Recording to and Playing Back from Song Memory
■ When recording to Track 1 without rhythm or
auto accompaniment
• Recording will start as soon as you play anything
on the keyboard.
Playing Back from Song Memory
1
Press the SONG MEMORY button so the
PLAY indicator lamp is lit.
2
Use the T1/L T2/R button to select the track
you want to play back.
■ When recording to Track 2
• Press the START/STOP button or play something
on the keyboard to start recording.
To record to a track while playing
back from the other
After you finish recording, you can play back Track 1
and Track 2 at the same time.
● The indicator lamps above the button show the
currently selected track.
• To play back Track 1, the TRACK 1/LEFT
indicator lamp should be lit.
• To play back Track 2, the TRACK 2/RIGHT
indicator lamp should be lit.
• To play back Track 1 and Track 2, both the
indicator lamps should be lit.
Example: To record to Track 2 while playing back the
contents of Track 1
1
Press the SONG MEMORY button so the
PLAY indicator lamp is lit.
3
• Select the tone and effects you want to use while
recording.
E-22
2
Press the T1/L T2/R button so TRACK 1/
LEFT indicator is lit.
3
Press the SONG MEMORY button again.
4
Press the START/STOP button or play
something on the keyboard to start
simultaneous playback from Track 1 and
recording to Track 2.
5
When you are finished, press the START/
STOP button again to stop recording.
Press the START/STOP button.
• This starts playback of the track you selected.
• You can change the tempo setting as a track is
playing.
• You cannot change the tone setting during
playback.
• Press the START/STOP button again to stop
playback.
• This causes the TRACK 1/LEFT indicator lamp
to flash. Press the T1/L T2/R button, so it
causes the TRACK 2/RIGHT indicator lamp to
flash, which indicates that the piano is standing
by for recording to Track 2.
407A-E-024C
Recording to and Playing Back from Song Memory
Deleting Song Memory Data
IMPORTANT!
• The procedure below deletes all of the data from the
selected track. Note that the delete operation cannot be
undone. Check to make sure you really do not need the
data in Song Memory before you perform the following
steps.
1
Press the SONG MEMORY button so the
REC indicator lamp is flashing.
2
Use the T1/L T2/R button to select the track
you want to delete.
• The indicator lamps above the button show the
currently selected track.
• To delete Track 1, the TRACK 1/LEFT indicator
lamp should be flashing.
• To delete Track 2, the TRACK 2/RIGHT
indicator lamp should be flashing.
3
Hold down the SONG MEMORY button
until the REC indicator lamp stops flashing
and remains lit.
4
Press the T1/L T2/R button.
407A-E-025A
• This deletes the selected track and enters the
standby state.
E-23
Other Settings
Adjusting Accompaniment
Volume
Changing the Keyboard Touch
Perform the following operation to change the volume
level of the rhythm and chord accompaniment.
While holding down the FUNCTION
button, use the keyboard keys shown below
to raise (왖) or lower (왔) the
accompaniment volume.
1
This setting changes the relative touch of the keyboard
keys.
1
While holding down the FUNCTION
button, press one of the keyboard keys
shown below.
Weak:
Strong:
▲
Off:
Normal:
▲
£
C1
▲
C1
▲
C2
▲
C3
▲
C4
▲
C5
▲
C6
▲
C7
▲
C8
왖 : Raises the accompaniment volume
왔 : Lowers the accompaniment volume
£
C2
£
C3
£
C4
£
C5
£
C6
£
C7
£
C8
Off
Weak (Strong sound is produced even when
relatively light pressure is applied.)
Normal
Strong (Normal sound is produced even when
relatively strong pressure is applied.)
TUNE
FUNCTION
E-24
TRANSPOSE
407A-E-026A
Other Settings
Changing the Piano Key
Use this setting to raise or lower the overall key of the
keyboard in semitone steps.
1
Holding down the FUNCTION button,
press the TRANSPOSE buttons to raise or
lower the overall key of the keyboard.
[
[
] : Raise
] : Lower
Using Digital Piano Setup
Memory
When setup memory is turned on, the digital piano
will remember its setup* whenever you turn it off. If
you turn off setup memory, settings will be cleared
when you turn off the digital piano.
Turning off the digital piano while in the rhythm
mode
The next time you turn on the digital piano, non-local
control setting (see “Using MIDI” below) will be
configured in accordance with setup memory.
Turning off the digital piano while in the user song
mode
The next time you turn on the digital piano, the
following settings will be configured in accordance
with setup memory.
NOTE
• To return the piano key to C, hold down the
FUNCTION button and press the TRANSPOSE
[ ] and [ ] buttons at the same time.
• After using Transpose to raise the keyboard to a
high key, notes played at the highest range of the
keyboard may not sound properly for certain tones.
Rhythm selection, accompaniment volume, keyboard
touch, pedal type, damper pedal setting, layered tone
volume balance, split point, send channel, accomp
MIDI out
1
While holding down the FUNCTION
button, press one of the keyboard buttons
shown below to turn setup memory on or
off.
On:
Changing the Pitch of the Piano
to Match Another Instrument
Off:
Use this setting to raise or lower the overall pitch of
the piano. The setting range is plus or minus 50 cents
(100 cents = 1 semitone) from the standard pitch of
A4 = 440.0Hz.
1
Holding down the FUNCTION button,
press the TUNE buttons to raise or lower
the overall pitch of the piano.
[
[
] : Raise
] : Lower
▲
C1
▲
C2
▲
C3
▲
C4
▲
C5
▲
C6
▲
C7
▲
C8
Using MIDI
What is MIDI?
The letters MIDI stand for Musical Instrument Digital
Interface, which is the name of a worldwide standard
for digital signals and connectors that makes it possible
to exchange musical data between musical
instruments and computers (machines) produced by
different manufacturers.
* Each press of the button changes the current setting by
approximately 1 cents (1/100 semitone).
NOTE
NOTE
• For detailed information about MIDI Implementation,
visit the CASIO website at: http://world.casio.com/.
• Holding down the FUNCTION button and pressing
the TUNE buttons [ ] and [ ] at the same time
returns tuning to the standard A4 = 440.0Hz.
407A-E-027B
E-25
Other Settings
1
MIDI Connections
To use a computer or other MIDI device to record and
playback the MIDI data produced by this keyboard,
you must connect the MIDI IN and MIDI OUT
terminals of both devices in order to send and receive
data.
There is a third MIDI terminal named MIDI THRU,
which passes any MIDI messages received by the
MIDI IN terminal on to another device.
While holding down the FUNCTION
button, press one the keyboard keys shown
below to configure the setting you want.
1
+
3
–
On:
Off:
MIDI cable: MK-5
MIDI IN
Other
device
▲
C1
▲
C2
▲
C3
▲
C4
▲
C5
2
MIDI OUT
▲
C6
On:
4
▲
C8
On:
MIDI IN
Off:
Computer etc.
MIDI Settings
1 Send Channel
Use this setting to specify one of the MIDI channels
(1 through 16) as the Send Channel for sending
MIDI messages to an external device.
2 Accomp/Song MIDI Out
Use this setting to specify whether or not MIDI
messages for the piano’s auto accompaniment and
song memory playback should be sent.
3 MIDI IN Chord Judge
Specifies whether chord judge should be performed
on accompaniment range MIDI Note On messages
received from an external device.
4 Local Control
This setting controls whether or not power is cut off
internally from the piano’s keyboard and sound
source. Turning off Local Control cuts off power to
the keyboard and source, which means that the piano
does not produce any sound when played. This
comes in handy when you want to turn off the piano’s
keyboard and use its auto accompaniment feature to
accompany an external sequencer or other device.
E-26
▲
C7
Off:
1 Send Channel
– : Decreases value
+: Increases value
2 Accomp/Song MIDI Out
Off
On
3 MIDI IN Chord Judge
Off
On
4 Local Control
Off
On
Saving the Song Data You
Download from the Internet
You can transfer song data from your computer to the
digital piano. You can store up to 10 tunes as user songs
0-9. For SMF data you purchase or create, you need to
use an SMF Converter to convert it to SMF 0 format
before transferring it to the digital piano.
407A-E-028A
Other Settings
To install the SMF Converter
1
On the computer to which you plan to
connect, install the SMF Converter that
comes on the CD-ROM that comes
bundled with the digital piano.
• On the CD-ROM, double-click “SMFConve.exe”, and then follow the instructions that
appear on your computer screen to install SMF
Converter.
To connect to a computer
Be sure to turn off the digital piano and your computer
before connecting them. You should also set the
volume controller of the digital piano to a relatively
low volume.
1
Connect the digital piano’s MIDI interface
to your computer’s MIDI interface.
CASIO MUSIC SITE
* Before installing SMF Converter, be sure to read the
contents of the “smfreadme.txt” file in each language
folder on the CD-ROM.
Internet
Service
Provider
For information about using SMF Converter, doubleclick “index.html” in the [help] folder, which was
created when you installed SMF Converter. You can
also access user documentation from the Windows
[Start] menu by clicking [Programs] - [CASIO] - [SMF
Converter] - [manual].
* A browser that supports frames (like Internet Explorer 4
or Netscape Navigator 4.04 or higher) is required to view
the SMF Converter manual.
Minimum Computer System Requirements
* Operating System:
Windows 98SE
Windows Me
Windows XP
OUT IN
MIDI Interface
MIDI IN
MIDI OUT
* Storage
At least 10MB free HDD space
* MIDI interface
2
Turn on the digital piano, and then turn on
your computer or other connected device.
• You can also obtain a copy of the SMF Converter
by downloading it at the Web page shown below.
After downloading, install the software on your
computer.
3
Start up the software you want to use on
your computer.
CASIO MUSIC SITE
http://music.casio.com/
• In addition to the software itself, the CASIO MUSIC
SITE will also provide you with information about
its installation and use. You can also find out about
the latest news about your digital piano and other
CASIO musical instruments, and much more.
407A-E-029A
NOTE
• Performing a digital piano operation while
transferring data between it and a computer may
interrupt the data transfer. Do not perform any
digital piano operations while data transfer is in
progress.
E-27
Troubleshooting
Symptom
Possible Cause
No sound produced when 1. VOLUME knob set to MIN.
keyboard keys are pressed.
2. Headphones connected to the
digital piano.
3. Local Control turned off.
4. Check
the
current
accompaniment mode setting.
Normally, the accompaniment
keyboard will not produce any
note while CASIO CHORD or
FINGERED is selected as the
accompaniment mode.
Keyboard out of tune.
Action
1. Move the VOLUME knob more
towards MAX.
2. Disconnect the headphones
from the digital piano.
3. Turn on Local control.
4. Change the accompaniment
mode to NORMAL.
Reference
Page E-7
Page E-5
Page E-26
Page E-14
1. The piano key is set to a value 1. Change the piano key setting to Page E-25
other than C.
C, or turn the digital piano
power off and then back on
again.
2. Incorrect pitch setting of the 2. Correct the pitch setting, or turn Page E-25
the digital piano power off and
piano.
then back on again.
No sound produced by demo tune 1. VOLUME knob set to MIN.
1. Move the VOLUME knob more Page E-7
play.
towards MAX.
2. Headphones connected to the 2. Disconnect the headphones Page E-5
from the digital piano.
digital piano.
Memory contents deleted.
Lithium battery is dead.
Contact your CASIO Service Page E-30
Provider for replacement of the
lithium battery.
No sound produced by connected 1. The digital piano Send Channel 1. Change the Send Channel
external MIDI sound source when
does not match the Send
settings so they are identical.
the digital piano keys are pressed.
Channel of the MIDI sound
source.
2. Volume or expression setting of 2. Change the volume or
the external sound source is set
expression setting of the
to 0.
external sound source to an
appropriate value.
Page E-26
See the
documentation
that comes with
the external
sound source.
A tone’s quality and volume This is an unavoidable result of the digital sampling process,* and does not indicate
sounds
slightly
different malfunction.
depending where it is played on * Multiple digital samples are taken for the low range, middle range, and high range of
the keyboard.
the original musical instrument. Because of this, there may be a very slight difference
in tonal quality and volume between sample ranges.
E-28
407A-E-030B
Specifications
Model:
PX-310
Keyboard:
88 piano keys (with touch response)
Polyphony:
32 notes, maximum
Tones:
12 panel tones + 12 variation tones + 40 advanced tones + 128 GM tones + 10 drum
sets; with layer, split
Digital Effects:
Reverb (4 types), Chorus (4 types), DSP, Brilliance
Demo Tunes:
Sequential looping of all 3 tunes (Original)
Auto Accompaniment:
• Number of Rhythms: 120
• Tempo Range: 30 to 255
• Controllers: START/STOP, INTRO/ENDING, SYNCHRO/FILL-IN
• Modes: Normal, CASIO CHORD, FINGERED, FULL RANGE CHORD
• Accompaniment Volume: Adjustable
User Songs:
• Number of Tunes: 10 tunes maximum (Approximately 145 KB*)
* Based on 1 KB = 1024 bytes
• Part On/Off: Left hand, right hand
Song Memory:
• Operations: Real-time recording, playback
• Capacity: Approximately 10,000 notes (2 tracks total)
• Memory Backup: Built-in lithium battery (Battery Life: 5 years)
Registration Memory:
Number of Memory Areas: 32 (4 sets × 8 banks)
Pedals:
Damper, Soft/Sostenuto (Selectable)
Other Functions:
• Touch: 3 types, off
• Transpose: 1 octave (F to C to F)
• Tuning: A4 = 440.0Hz ±50 cents (adjustable)
MIDI:
16 multi-timbre receive
Input/Output:
• Headphones: Stereo mini jacks × 2
• Pedal: Standard jacks × 2
• LINE OUT (R)(L/MONO): Standard jacks × 2
Output impedance: 2.3kΩ
Output voltage: 1.0V (RMS) MAX
• LINE IN (R)(L/MONO):
Standard jacks × 2
Input impedance: 9.0kΩ
Input voltage: 200mV
• Power: 12V DC
• MIDI (THRU) (OUT) (IN)
• Pedal connector (for optional SP-30 only)
Speakers:
(12cm × 6cm OVAL) × 2 + φ 5cm × 2 (Output: 8.0W + 8.0W)
Power Supply:
AC Adaptor: AD-12
Power Consumption:
12V
Dimensions:
132.3 × 27.8 × 13.2cm (52 1/16 × 10 15/16 × 5 3/16 inch)
Weight:
Approximately 11.9 kg (26.2 lbs)
18W
• Design and specifications are subject to change without notice.
407A-E-031B
E-29
Operational Precautions
Locating the Unit
Avoid the following locations.
• Areas exposed to direct sunlight and high humidity
• Areas subjected to very low temperatures
• Near a radio, TV, video deck, or tuner (unit can
cause interference with audio or video signals)
You may notice lines in the finish of the case of
this product. These lines are the result of the
molding process used to shape the plastic of the
case. They are not cracks or breaks in the plastic,
and are no cause for concern.
NOTE
Care of the Unit
• Never use benzene, alcohol, thinner or other such
chemicals to clean the exterior of the unit.
• To clean the keyboard, use a soft cloth dampened
with a weak solution of a mild neutral detergent
and water. Wring out all excess moisture from the
cloth before wiping.
• Unauthorized reproduction of this manual in its
entirety or in part is expressly forbidden. All rights
reserved.
• CASIO COMPUTER CO., LTD. shall not be held
liable for any damages or losses or any claims by
third parties arising from use of this product or this
manual.
• The contents of this manual are subject to change
without notice.
Lithium Battery
This unit is equipped with a lithium battery to provide
power needed to retain memory contents while unit
power is turned off. Should the lithium battery go
dead, all memory contents will be lost whenever you
turn unit power off. The normal life of the lithium
battery is five years from the time that the battery was
installed. Be sure to periodically contact your retailer
or authorized service provider to have the lithium
battery replaced. Note that you will be charged
separately for lithium battery replacement.
• Note that CASIO COMPUTER CO., LTD. shall not
be held liable for any damages or losses or any
claims by third parties arising from corruption or
loss of data caused by malfunction or repair of the
unit, or from battery replacement.
E-30
407A-E-032A
407A-E-033A
ff
O
C1
k
ng
ea orm tro
W N
S
al
to
nu
t ste
f
So So
rd
oa
yb
Ke
ch
u
To
C5
lF
da
Pe
n
io
ct
un
*
D
am
r
pe
P
e
R
O
H
C
D
C
C2
d
r
ho
E
G
ED AN
R
D
R
IO GE L- R
m
L O
or AS N
N C FI FU CH
al
m
lu
Vo
t
en
im
an
p
om
cc
Se
A
al
ed
g
ttin
o
M
C6
de
C3
–
+
0
1
ff
O
2
O
n
3
5
SP
D
C7
4
6
7
er
In
8
Ke
–
+
e
nc
9
ys
ne a
to bal
ed e
r
ye lum
La vo
b
–, m
+/ Nu
t
pu
nd
ff
O
Se
n
n
ha
O
C
C4
ff
O
l
ne
c
So
ng
n
n ff
O O O
Ac
om
p/
M
O
ff
O
L
d
Ju
n
O
on
ge
C
al
oc
rd
ho
C8
C
ut
N
II
ID
M
I
ID
tro
l
t
Se
up
M
or
em
* The notes of the keys sound when pressed, even if the FUNCTION button is depressed.
• A value next to a note name indicates the relative position of the note on the keyboard as shown below.
While the FUNCTION button is depressed, the keyboard keys can be used to perform a variety of different setting functions.
y
Setting Control Key Chart
E-31
Appendix/Apéndice
Tone List/Lista de sonidos
Panel Tones/Sonidos de panel
2
3
4
5
GRAND PIANO 1
ROCK PIANO
E.GRAND 80
ELEC.PIANO 1
ELEC.PIANO 2
60’S ELEC.PIANO
ROCK ORGAN
JAZZ ORGAN
STRINGS
SYNTH-VOICE
SYNTH-BRASS
FANTASY
16
16
32
32
16
32
32
16
32
32
16
16
0
4
2
4
5
4
16
17
49
54
62
88
100
100
48
48
49
52
51
50
48
48
49
48
6
GRAND PIANO 2
DANCE PIANO
PIANO PAD
DYNO ELEC.PIANO
FM ELEC.PIANO
VIBRAPHONE
DRAWBAR ORGAN
CLAVI
SYNTH-STRINGS
CHOIR
SYNTH-PAD
NEW AGE
3
4
5
1 No./No
32
16
16
32
16
32
16
32
32
16
16
16
1
6
7
4
5
11
16
7
50
52
90
88
100
100
100
49
48
49
49
48
48
49
48
49
2 Tone Name/Nombre de sonidos
3 Maximum Polyphony/Polifonía máxima
4 Program Change/Cambio de programa
5 Bank Select MSB/MSB de selección de banco
6 Variation Tones/Sonidos de variación
Advanced Tones/Sonidos avanzados
1
0
1
2
3
4
5
6
7
8
9
10
11
12
13
2
LA PIANO
MELLOW PIANO
MODERN PIANO
HONKY-TONK
OCTAVE PIANO
POP ELEC.PIANO
SYNTH-STR E.PIANO
HARPSICHORD
MARIMBA
ROTARY DRAWBAR
ROTARY PERC.ORGAN
OVD ROTARY ORGAN
CHURCH ORGAN
CHAPEL ORGAN
3
4
5
1
2
3
4
5
1
32
16
16
16
16
16
16
32
32
32
16
32
16
32
3
2
5
8
9
4
4
6
12
16
17
16
19
19
100
100
100
100
100
50
53
49
48
50
49
52
49
50
14
15
16
17
18
19
20
21
22
23
24
25
26
27
NYLON STR.GUITAR
STEEL STR.GUITAR
JAZZ GUITAR
CHORUS CLEAN GUITAR
OVERDRIVE GUITAR
ACOUSTIC BASS
RIDE BASS
FINGERED BASS
ANALOG SYNTH-BASS
VIOLIN
HARP
STRING ENSEMBLE
80’S SYNTH-STR
TRUMPET
32
32
32
32
32
32
16
32
32
32
32
16
16
32
24
25
26
27
27
32
32
33
38
40
46
48
50
56
48
48
48
48
51
49
50
48
52
48
48
49
50
48
28
29
30
31
32
33
34
35
36
37
38
39
2
3
4
5
1
32
32
32
32
32
32
32
16
32
32
32
32
16
32
32
16
32
32
32
32
32
32
32
32
32
32
32
32
32
16
32
32
16
16
16
16
16
16
16
16
16
32
16
16
16
16
16
32
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
2
TROMBONE
STEREO BRASS
BREATHY ALTO SAX
ALTO SAX
TENOR SAX
CLARINET
FLUTE
SAWTOOTH LEAD
SQUARE LEAD
WARM PAD
SPACE VOICE
STAR VOICE
3
4
5
16
16
16
32
16
16
32
16
16
32
16
16
57
61
65
65
66
71
73
81
80
89
91
91
49
49
50
49
49
49
48
48
48
48
48
49
3
4
5
16
16
16
16
16
16
32
16
16
32
32
32
32
16
32
32
32
32
16
32
32
32
32
32
32
32
16
16
32
32
16
32
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
GM Tones/Sonidos GM
1
2
3
4
5
1
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
GM PIANO 1
GM PIANO 2
GM PIANO 3
GM HONKY-TONK
GM E.PIANO 1
GM E.PIANO 2
GM HARPSICHORD
GM CLAVI
GM CELESTA
GM GLOCKENSPIEL
GM MUSIC BOX
GM VIBRAPHONE
GM MARIMBA
GM XYLOPHONE
GM TUBULAR BELL
GM DULCIMER
GM ORGAN 1
GM ORGAN 2
GM ORGAN 3
GM PIPE ORGAN
GM REED ORGAN
GM ACCORDION
GM HARMONICA
GM BANDONEON
GM NYLON STR.GUITAR
GM STEEL STR.GUITAR
GM JAZZ GUITAR
GM CLEAN GUITAR
GM MUTE GUITAR
GM OVERDRIVE GT
GM DISTORTION GT
GM GT HARMONICS
GM ACOUSTIC BASS
GM FINGERED BASS
GM PICKED BASS
GM FRETLESS BASS
GM SLAP BASS 1
GM SLAP BASS 2
GM SYNTH-BASS 1
GM SYNTH-BASS 2
GM VIOLIN
GM VIOLA
GM CELLO
GM CONTRABASS
GM TREMOLO STRINGS
GM PIZZICATO
GM HARP
GM TIMPANI
32
32
32
16
32
16
32
32
32
32
16
32
32
32
32
16
32
16
16
16
32
16
32
16
32
32
32
32
32
16
16
32
32
32
32
32
32
32
16
32
32
32
32
32
32
32
32
32
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
407A-E-067A
GM STRINGS 1
GM STRINGS 2
GM SYNTH-STRINGS 1
GM SYNTH-STRINGS 2
GM CHOIR AAHS
GM VOICE DOO
GM SYNTH-VOICE
GM ORCHESTRA HIT
GM TRUMPET
GM TROMBONE
GM TUBA
GM MUTE TRUMPET
GM FRENCH HORN
GM BRASS
GM SYNTH-BRASS 1
GM SYNTH-BRASS 2
GM SOPRANO SAX
GM ALTO SAX
GM TENOR SAX
GM BARITONE SAX
GM OBOE
GM ENGLISH HORN
GM BASSOON
GM CLARINET
GM PICCOLO
GM FLUTE
GM RECORDER
GM PAN FLUTE
GM BOTTLE BLOW
GM SHAKUHACHI
GM WHISTLE
GM OCARINA
GM SQUARE LEAD
GM SAWTOOTH LEAD
GM CALLIOPE
GM CHIFF LEAD
GM CHARANG
GM VOICE LEAD
GM FIFTH LEAD
GM BASS+LEAD
GM FANTASY
GM WARM PAD
GM POLYSYNTH
GM SPACE CHOIR
GM BOWED GLASS
GM METAL PAD
GM HALO PAD
GM SWEEP PAD
2
GM RAIN DROP
GM SOUND TRACK
GM CRYSTAL
GM ATMOSPHERE
GM BRIGHTNESS
GM GOBLINS
GM ECHOES
GM SF
GM SITAR
GM BANJO
GM SHAMISEN
GM KOTO
GM THUMB PIANO
GM BAGPIPE
GM FIDDLE
GM SHANAI
GM TINKLE BELL
GM AGOGO
GM STEEL DRUMS
GM WOOD BLOCK
GM TAIKO
GM MELODIC TOM
GM SYNTH-DRUM
GM REVERSE CYMBAL
GM GT FRET NOISE
GM BREATH NOISE
GM SEASHORE
GM BIRD
GM TELEPHONE
GM HELICOPTER
GM APPLAUSE
GM GUNSHOT
Drum Sets/Ajustes de batería
1
168
169
170
171
172
173
174
175
176
177
2
STANDARD SET 1
STANDARD SET 2
ROOM SET
POWER SET
ELECTRONIC SET
SYNTH SET 1
SYNTH SET 2
JAZZ SET
BRUSH SET
ORCHESTRA SET
3
4
5
–
–
–
–
–
–
–
–
–
–
0
1
8
16
24
25
30
32
40
48
120
120
120
120
120
120
120
120
120
120
A-1
Appendix/Apéndice
Rhythm List/Lista de ritmos
1 No./No
2 Rhythm Name/Nombre de ritmo
1
8 BEAT
000
001
002
003
004
005
006
007
16 BEAT
008
009
010
011
012
013
014
015
POPS
016
017
018
019
020
021
022
023
024
025
026
BALLAD
027
028
029
030
031
032
033
034
035
036
ROCK
037
038
039
040
041
042
043
044
DANCE
045
046
047
048
049
050
051
052
053
054
055
JAZZ
056
057
058
059
060
061
062
063
064
EUROPIAN
065
066
067
068
069
070
071
072
073
A-2
2
8 BEAT 1
8 BEAT 2
8 BEAT 3
8 BEAT POP 1
8 BEAT POP 2
60’S SOUL
8 BEAT DANCE
POP ROCK
16 BEAT 1
16 BEAT 2
16 BEAT 3
SLOW 16 BEAT
16 BEAT SHUFFLE 1
16 BEAT SHUFFLE 2
FUNK
LATIN FUSION
POP 1
POP 2
GUITAR POP
SOUL
POP SHUFFLE
SOUL POP
WORLD POP
MELLOW R&B
60’S POP
OLDIES POP
POP WALTZ
8 BEAT BALLAD 1
8 BEAT BALLAD 2
16 BEAT BALLAD 1
16 BEAT BALLAD 2
16 BEAT BALLAD 3
6/8 BALLAD
ROCK BALLAD
POP BALLAD
OLDIES BALLAD
SERENADE
ROCK 1
ROCK 2
R&B
SHUFFLE ROCK
60’S ROCK
SHUFFLE BOOGIE
BLUES
TWIST
1
2
LATIN/VARIOUS
074
BOSSA NOVA
075
SAMBA
076
MERENGUE
077
CUMBIA
078
CHA-CHA-CHA
079
BEGUINE
080
BOLERO
081
MAMBO
082
RHUMBA
083
TANGO
084
REGGAE
085
SKA
086
LATIN DISCO
087
BLUEGRASS
088
COUNTRY
089
COUNTRY SHUFFLE
090
COUNTRY WALTZ
091
FAST GOSPEL
092
SLOW GOSPEL
093
BROADWAY
094
DIXIE
095
PASODOBLE
096
HAWAIIAN
097
ADANI
098
BALADI
099
SYMPHONY
FOR PIANO
100
PIANO BALLAD 1
101
PIANO BALLAD 2
102
PIANO BALLAD 3
103
EP BALLAD 1
104
EP BALLAD 2
105
BLUES BALLAD
106
MELLOW JAZZ
107
JAZZ COMBO 2
108
RAGTIME
109
BOOGIE-WOOGIE
110
ARPEGGIO 1
111
ARPEGGIO 2
112
ARPEGGIO 3
113
PIANO BALLAD 4
114
6/8 MARCH
115
MARCH 2
116
2 BEAT
117
WALTZ 3
118
WALTZ 4
119
WALTZ 5
NOTE
TRANCE
RAVE
TECHNO
HOUSE
LATIN HOUSE
DANCE
MODERN R&B
HIP-HOP
DANCE POP 1
DANCE POP 2
DISCO SOUL
FAST BIG BAND
MIDDLE BIG BAND
JAZZ COMBO 1
SWING
SLOW SWING
MODERN JAZZ
FOX TROT
QUICKSTEP
JAZZ WALTZ
POLKA
POLKA FOX
POP POLKA
MARCH 1
GERMAN MARCH
WALTZ 1
WALTZ 2
VIENNESE WALTZ
FRENCH WALTZ
• Rhythms 110 through 119 consist of chord accompaniments
only, without any drums or other percussion instruments.
These rhythms do not sound unless CASIO CHORD,
FINGERED, or FULL RANGE CHORD is selected as the
accompaniment mode. With such rhythms, make sure that
CASIO CHORD, FINGERED, or FULL RANGE CHORD
is selected before you try playing chords.
NOTA
• Los ritmos 110 al 119 consisten solamente de
acompañamientos de acordes, sin ninguna batería ni otros
instrumentos de percusión. Estos ritmos no suenan a
menos que CASIO CHORD, FINGERED o FULL RANGE
CHORD sean seleccionados como el modo de
acompañamiento. Con tales ritmos, asegúrese de que se
selecciona CASIO CHORD, FINGERED o FULL RANGE
CHORD, antes de tratar de ejecutar los acordes.
407A-E-068C
Appendix/Apéndice
Drum Assignment List/Lista de asignación de batería
”
” Indicates the same sound as STANDARD SET 1./”
Key/
Note number
C-1 0
D-1 2
E-1 4
F-1 5
G-1 7
A-1 9
B-1 11
C0 12
D0 14
E0 16
F0 17
C#-1 1
E -1 3
F#-1 6
A -1 8
B -1 10
C#0 13
E 0 15
F#0 18
G0 19
A 0 20
A0 21
B 0 22
B0 23
C1 24
D1 26
E1 28
F1 29
G1 31
A1 33
B1 35
C2 36
D2 38
E2 40
F2 41
G2 43
A2 45
B2 47
C3 48
D3 50
E3 52
F3 53
C#1 25
E 1 27
F#1 30
A 1 32
B 1 34
C#2 37
E 2 39
F#2 42
A2 44
B2 46
C#3 49
E 3 51
F#3 54
G3 55
A3 56
A3 57
B 3 58
B3 59
C4 60
D4 62
E4 64
F4 65
C#4 61
E 4 63
F#4 66
G4 67
A4 68
A4 69
B 4 70
B4 71
C5 72
D5 74
E5 76
F5 77
G5 79
A5 81
B5 83
C6 84
D6 86
E6 88
F6 89
G6 91
A6 93
B6 95
C7 96
D7 98
E7 100
F7 101
G7 103
A7 105
B7 107
C8 108
D8 110
E8 112
F8 113
G8 115
A8 117
B8 119
C9 120
D9 122
E9 124
F9 125
G9 127
C#5 73
E 5 75
F#5 78
A 5 80
B 5 82
C#6 85
E 6 87
F#6 90
A6 92
B 6 94
C#7 97
E 7 99
F#7 102
A7 104
B 7 106
C#8 109
E 8 111
F#8 114
A8 116
B 8 118
C#9 121
E 9 123
F#9 126
407A-E-069A
” Indica el mismo sonido que STANDARD SET 1.
DRUMS SET LIST
STANDARD SET 1 STANDARD SET 2
ROOM SET
씯
씯
씯
씯
—
—
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
—
—
—
씯
씯
씯
씯
씯
씯
씯
씯
STANDARD2 KICK 2
STANDARD2 KICK 1
씯
STANDARD2 SNARE 1
씯
STANDARD2 SNARE 2
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
—
—
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
—
—
—
씯
씯
씯
씯
씯
씯
씯
씯
ROOM KICK 2
ROOM KICK 1
씯
ROOM SNARE 1
씯
ROOM SNARE 2
ROOM LOW TOM 2
씯
ROOM LOW TOM 1
씯
ROOM MID TOM 2
씯
ROOM MID TOM 1
ROOM HI TOM 2
씯
ROOM HI TOM 1
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
씯
씯
씯
씯
씯
씯
씯
씯
METRONOME CLICK
METRONOME BELL
METRONOME CLICK
METRONOME BELL
—
—
LOW TOM 2b
LOW TOM 1b
MID TOM 2b
MID TOM 1b
HIGH TOM 2b
HIGH TOM 1b
CRASH CYMBAL 1a
CRASH CYMBAL 1b
CRASH CYMBAL 1c
CRASH CYMBAL 2a
CRASH CYMBAL 2b
CRASH CYMBAL 2c
RIDE CYMBAL 1a
RIDE CYMBAL 1b
RIDE CYMBAL 1c
RIDE CYMBAL 2a
RIDE CYMBAL 2b
RIDE CYMBAL 2c
—
—
—
HIGH Q
SLAP
SCRATCH PUSH
SCRATCH PULL
STICKS
SQUARE CLICK
METRONOME CLICK
METRONOME BELL
STANDARD1 KICK 2
STANDARD1 KICK 1
SIDE STICK
STANDARD1 SNARE 1
HAND CLAP 1
STANDARD1 SNARE 2
LOW TOM 2
CLOSED HI-HAT
LOW TOM 1
PEDAL HI-HAT
MID TOM 2
OPEN HI-HAT
MID TOM 1
HIGH TOM 2
CRASH CYMBAL 1
HIGH TOM 1
RIDE CYMBAL 1
CHINESE CYMBAL
RIDE BELL
TAMBOURINE
SPLASH CYMBAL
COWBELL
CRASH CYMBAL 2
VIBRA-SLAP
RIDE CYMBAL 2
HIGH BONGO
LOW BONGO
MUTE HIGH CONGA
OPEN HIGH CONGA
LOW CONGA
HIGH TIMBALE
LOW TIMBALE
HIGH AGOGO
LOW AGOGO
CABASA
MARACAS
SHORT HI WHISTLE
LONG LOW WHISTLE
SHORT GUIRO
LONG GUIRO
CLAVES
HIGH WOOD BLOCK
LOW WOOD BLOCK
MUTE CUICA
OPEN CUICA
MUTE TRIANGLE
OPEN TRIANGLE
SHAKER
JINGLE BELL
BELL TREE
CASTANETS
MUTE SURDO
OPEN SURDO
APPLAUSE
APPLAUSE2
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
STANDARD KICK 1a
STANDARD KICK 1b
STANDARD KICK 1c
STANDARD KICK 1d
STANDARD KICK 2a
STANDARD KICK 2b
STANDARD KICK 2c
STANDARD KICK 2d
STANDARD1 SNARE a
STANDARD1 SNARE b
STANDARD1 SNARE c
STANDARD1 SNARE d
CLOSED HI-HAT a
CLOSED HI-HAT b
CLOSED HI-HAT c
CLOSED HI-HAT d
PEDAL HI-HAT a
PEDAL HI-HAT b
OPEN HI-HAT a
OPEN HI-HAT b
POWER SET
씯
씯
씯
씯
—
—
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
—
—
—
씯
씯
씯
씯
씯
씯
씯
씯
POWER KICK 2
POWER KICK 1
씯
POWER SNARE 1
씯
POWER SNARE 2
POWER LOW TOM 2
씯
POWER LOW TOM 1
씯
POWER MID TOM 2
씯
POWER MID TOM 1
POWER HI TOM 2
씯
POWER HI TOM 1
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
씯
씯
씯
씯
씯
씯
씯
씯
ELEC. SET
씯
씯
씯
씯
—
—
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
—
—
—
씯
씯
씯
씯
씯
씯
씯
씯
ELEC KICK 2
ELEC KICK 1
씯
ELEC SNARE 1
씯
ELEC SNARE 2
ELEC LOW TOM 2
씯
ELEC LOW TOM 1
씯
ELEC MID TOM 2
씯
ELEC MID TOM 1
ELEC HI TOM 2
씯
ELEC HI TOM 1
씯
REVERSE CYMBAL
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
씯
씯
씯
씯
씯
씯
씯
씯
SYNTH SET 1
씯
씯
씯
씯
—
—
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
—
—
—
씯
씯
씯
씯
씯
씯
씯
씯
SYNTH 1 KICK 2
SYNTH 1 KICK 1
SYNTH 1 RIM SHOT
SYNTH 1 SNARE 1
SYNTH HAND CLAP
SYNTH 1 SNARE 2
SYNTH 1 LOW TOM 2
SYNTH 1 CHH
SYNTH 1 LOW TOM 1
SYNTH 1 PHH
SYNTH 1 MID TOM 2
SYNTH 1 OHH
SYNTH 1 MID TOM 1
SYNTH 1 HI TOM 2
SYNTH 1 CYMBAL
SYNTH 1 HI TOM 1
SYNTH 1 RIDE
씯
씯
SYNTH 1 TAMBOURINE
씯
SYNTH 1 COWBELL
씯
씯
씯
씯
씯
SYNTH 1 HIGH CONGA
SYNTH 1 MID CONGA
SYNTH 1 LOW CONGA
씯
씯
씯
씯
씯
SYNTH 1 MARACAS
씯
씯
씯
씯
SYNTH 1 CLAVES
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
씯
씯
씯
씯
씯
씯
씯
씯
SYNTH SET 2
씯
씯
씯
씯
—
—
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
—
—
—
씯
씯
씯
씯
씯
씯
씯
씯
SYNTH 2 KICK 2
SYNTH 2 KICK 1
씯
SYNTH 2 SNARE 1
씯
SYNTH 2 SNARE 2
SYNTH 2 LOW TOM 2
SYNTH 2 CHH
SYNTH 2 LOW TOM 1
SYNTH 2 PHH
SYNTH 2 MID TOM 2
SYNTH 2 OHH
SYNTH 2 MID TOM 1
SYNTH 2 HI TOM 2
SYNTH 2 CYMBAL 1
SYNTH 2 HI TOM 1
SYNTH 2 RIDE 1
씯
씯
씯
씯
씯
SYNTH 2 CYMBAL 2
씯
SYNTH 2 RIDE 2
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
씯
씯
씯
씯
씯
씯
씯
씯
JAZZ SET
씯
씯
씯
씯
—
—
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
—
—
—
씯
씯
씯
씯
씯
씯
씯
씯
JAZZ KICK 2
JAZZ KICK 1
씯
JAZZ SNARE 1
HAND CLAP 2
JAZZ SNARE 2
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
씯
씯
씯
씯
씯
씯
씯
씯
BRUSH SET
씯
씯
씯
씯
—
—
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
—
—
—
씯
씯
씯
씯
씯
씯
씯
씯
BRUSH KICK 2
BRUSH KICK 1
씯
BRUSH TAP
BRUSH SLAP
BRUSH SWIRL
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
씯
씯
씯
씯
씯
씯
씯
씯
ORCHESTRA SET
씯
씯
씯
씯
—
—
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
—
—
—
CLOSED HI-HAT
PEDAL HI-HAT
OPEN HI-HAT
RIDE CYMBAL 1
씯
씯
씯
씯
JAZZ KICK 1
CONCERT BASS DRUM
씯
CONCERT SNARE
CASTANETS
CONCERT SNARE
TIMPANI F
TIMPANI F
TIMPANI G
TIMPANI A
TIMPANI A
TIMPANI B
TIMPANI B
TIMPANI c
TIMPANI c
TIMPANI d
TIMPANI e
TIMPANI e
TIMPANI f
씯
씯
씯
CONCERT CYMBAL 2
씯
CONCERT CYMBAL 1
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
씯
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
씯
씯
씯
씯
씯
씯
씯
씯
A-3
A-4
F
F /(G )
G
(G )/A
A
(A )/B B
F /(G )
G
(G )/A
A
(A )/B B
Chord
Type
F
Root
E
m75
E
dim
(D )/E M7
(D )/E dim7
D
m7
D
7
C /(D )
m
C /(D )
M
C
Chord
Type
C
Root
Cuadro de acordes digitados (Fingered)
Fingered Chord Chart
aug
sus4
7sus4
m add9
mM7
75
add9
Appendix/Apéndice
407A-E-070A
MIDI Implementation Chart
Model PX-310
Function ...
Transmitted
Recognized
Basic
Channel
Default
Changed
1-16
1-16
1-16
1-16
Mode
Default
Messages
Altered
Mode 3
X
❊❊❊❊❊❊❊❊❊❊❊❊❊❊
Mode 3
X
❊❊❊❊❊❊❊❊❊❊❊❊❊❊
True voice
21-108
❊❊❊❊❊❊❊❊❊❊❊❊❊❊
0-127
0-127 *1
Velocity
Note ON
Note OFF
O 9nH V = 1-127
X 9nH V = 0
O 9nH V = 1-127
X 9nH V = 0, 8nH V = **
After
Touch
Key’s
Ch’s
X
X
X
O
X
O
O
X
O
X
X
X
X
X
X
X
O
O*2
O*2
X
X
X
X
X
X
X
X
X
X
X
X
X
X
O
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Note
Number
Pitch Bender
0,32
1
6,38
7
10
11
16
17
18
19
64
66
67
71
72
73
74
76
77
78
80
81
82
83
91
93
98,99
100,101
120
121
Control
Change
Program
Change
O 0-127
❊❊❊❊❊❊❊❊❊❊❊❊❊❊
O 0-127
❊❊❊❊❊❊❊❊❊❊❊❊❊❊
System Exclusive
O
O
System
Common
: Song Pos
: Song Sel
: Tune
X
X
X
X
X
X
System
Real Time
: Clock
: Commands
O
O
X
X
Aux
: Local ON/OFF
: All notes OFF
: Active Sense
: Reset
X
X
X
X
X
O
O
X
Messages
:True #
Remarks
Mode 1 : OMNI ON, POLY
Mode 3 : OMNI OFF, POLY
407A-E-071B
Version: 1.0
Remarks
*1: Depends on tone
*1: Depende del tono.
**: no relation
**: sin relación
Bank select
Modulation
Data entry
Volume
Pan
Expression
DSP Parameter0
DSP Parameter1
DSP Parameter2
DSP Parameter3
Damper
Sostenuto
Soft pedal
Resonance
Release Time
Attack Time
Brightness
Vibrato rate
Vibrato depth
Vibrato delay
DSP Parameter4
DSP Parameter5
DSP Parameter6
DSP Parameter7
Reverb send
Chorus send
NRPN LSB, MSB
RPN LSB, MSB
All sound off
Reset all controller
*2 In accordance with pedal
*2 De acuerdo al pedal.
Mode 2 : OMNI ON, MONO
Mode 4 : OMNI OFF, MONO
O : Yes
X : No
This recycle mark indicates that the packaging conforms to
the environmental protection legislation in Germany.
Esta marca de reciclaje indica que el empaquetado se
ajusta a la legislación de protección ambiental en Alemania.
CASIO COMPUTER CO.,LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
P
MA0603-C Printed in China
PX310ES1C
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement