Commax CDV-40N User manual
Add to my manuals11 Pages
Commax CDV-40N is a video door phone that allows you to see and speak with visitors at your door, answer calls, adjust screen brightness, color, and contrast, and remotely open the door. You can also connect an optional intercom to communicate with other rooms in your house or office. The device has a built-in chime and volume control for incoming calls. It's easy to install and comes with a user-friendly interface.
advertisement
www.safemag.ru
User Manual
Video Door Phone CDV-40N
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133
Web site : www.commax.com
•
Thank you for purchasing COMMAX products.
• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
• The company is not responsible for any safety accidents caused by abnormal operation of the product.
www.safemag.ru
www.safemag.ru
Table of contents
1. Greetings ................................................................................................. 1
2. Warnings and caution.............................................................................. 2
3. Part names and functions......................................................................... 4
4. Operating ................................................................................................. 5
5. Installation ............................................................................................... 7
6. Wiring...................................................................................................... 8
7. Part list..................................................................................................... 9
8. Miscellaneous...........................................................................................9
9. Specifications .......................................................................................... 9
1. Greetings
● Thank you very much for choosing COMMAX.
● Please read this manual carefully before you use the product. www.safemag.ru
1
2 www.safemag.ru
2. Warnings and caution
Please follow the things described below in order to prevent any danger or property damage.
Warning
It may cause a serious damage or injury if violated.
Caution
It may cause a minor damage or injury if violated.
Prohibition.
No disassembly
No touch
Must follow strictly.
Shows plugging out the power cord without an exception
Shows the warning and caution for an electric shock.
Shows the warning and caution for a fire.
Warning
Please don’t use several products at the same time on one power socket.
·It may cause a fire due to an abnormal overheating. cable excessively or it may cause an electric shock.
·fire when using a damaged power cable. cable with a wet hand.
·It may cause an electric shock.
Please plug out the power cable from the socket when not using it for a long period of time.
·It may shorten the product lifespan or cause a fire.
Please don’t install the product in the place where there is much oil, smoke or humidity.
·It may cause an electric shock or fire.
Please don’t install the product with the lightening and thunder.
·It may cause an electric shock or fire.
this product with other products with different rated voltage
·It may cause a disorder or fire.
When installing the product that generates heat, please install the product away from the wall (10cm) for the ventilation.
·It may cause a fire due to the increased internal temperature. www.safemag.ru
www.safemag.ru
Warning
Please don’t disassemble, repair or rebuild this product arbitrarily (please contact the service center if a repair is needed.
·It may cause an electric shock or fire.
If an abnormal sound, burning smell or smoke is coming out of the product, please plug out the power cable and contact a service center.
·It may cause an electric shock or fire.
Please don’t insert any metallic or burnable materials into the ventilation hole.
·It may cause an electric shock or fire.
Please use only the designated batteries for the products of using DC power.
·It may cause an electric shock or fire.
Caution
Please plug the power cable firmly into the inner end
·It may cause a fire.
Please hold the plug tightly when unplugging the power cable (a part of the copper wire may be disconnected if the grabbing is only made on the cord when pulling out the cable).
·It may cause an electric shock or fire
When connecting the power cables after cutting the cable, please install the product with power off
·It may cause an electric shock or fire
When installing the product, please fix it firmly while using the wall-mounting unit and screws.
·It may cause an injury from the falling object.
Please be careful when using an AC circuit breaker since there is a possibility of an electric shock.
Please check the use voltage and current for the DC-only products and use the appropriate rectifier.
·It may cause a fire.
Please avoid direct rays of the sun or heating devices at a time of installation.
·It may cause a fire.
Please don’t install the product on an unstable place or small support board.
·It may cause an injury if it falls down while in use.
When cleaning the product, please rub it with a soft and dry cloth after plugging out use any chemical products such as wax, benzene, alcohol or cleanser.) a shock .
·It may cause a failure.
Please use the designated connection cable within the maximum calling distance designated for the product
·It may reduce the product performance.
3 www.safemag.ru
4 www.safemag.ru
3. Part names and functions
②
①
③
④
⑤ ⑥ ⑬
⑦
⑧
⑨
⑩ ⑪
⑫
No.
Name
1 BRIGHT button
2 COLOR button
3 CONT button
Adjust brightness
Adjust color
Adjust contrast
Description
4 RESET button Returned to default color/brightness/Contrast
5 Handset Handset
6 Screen LCD
1. Press this button to check the entrance status
7 Monitoring / UP button
8 Interphone call
2. Press this button to adjust BRIGHT / COLOR / CONT
Pick up the handset and call
9 Door open / DOWN button
1. Door release operates if you press this button during the conversation
2. Press this button to adjust BRIGHT / COLOR / CONT
10 Power On / Off
11 Volume control
ON/OFF Switch
Control incoming call volume
12 Connection / program terminal Connecting Cameras/Interphone / Program updating
13 Power indicator LED Light www.safemag.ru
www.safemag.ru
4. Operating
1. Calling of visitor
The visitor presses the call button on the camera
A chime sounds
The visitor’s image appears on the monitor
Dialog begins
Open the door
TThhee ddoooorr rreelleeaassee ffuunnccttiioonn ooppeerraatteess oonnllyy wwhheenn tthhee vviissiittoorr’’ss iimmaaggee iiss ddiissppllaayyeedd oonn tthhee ssccrreeeenn
Dialog duration
60 seconds at a time
To check
A view of the front door can be seen anytime the entrance button is pressed and a dialog can be made with anyone at the front door.
* In case of connecting two cameras
The visitor presses the call button on the camera1
A chime sounds
The visitor’s image appears on the monitor
Ends the call
Hang-up the handset
Press once
Camera 1 view
The visitor presses the call button on the camera2
A chime sounds
The visitor’s image appears on the monitor
Press twice
Camera 2 view
2. Communication with the optional Interphone
A visitor calls from the entrance
A chime rings simultaneously from both the monitor and interphone
Dialog begins conversation can take place if the monitor or interphone is simultaneously
End the dialog
Open the door
Hang-up the handset
Call from the monitor
"Tu-Tu-Tu"
Sound
Dialog begins
Call to the monitor
Dialog between the interphone and camera is possible only when the visitor
’s image is visible on the monitor screen.
Dialog begins
5 www.safemag.ru
www.safemag.ru
3. BRIGHT / COLOR / CONT setting (Available only in Monitoring status)
1). BRIGHT setting
① Press Monitoring button when the handset is hung on properly. (LED Blinking)
② Press BRIGHT button on the left while the screen is turned on. (Beep sound once)
③ Power LED is blinked as fast (BRIGHT control mode)
④ Adjust the Brightness as the user wants by pressing UP / DOWN button
⑤ Press the BRIGHT button to save the new setting when the setting is over. (Beep
Beep sound)
2). COLOR setting
① Press Monitoring button when the handset is hung on properly. (LED Blinking)
② Press COLOR button on the left while the screen is turned on. (Beep sound once)
③ Power LED is blinked as fast (COLOR control mode)
④ Adjust the color as the user wants by pressing UP / DOWN button
⑤ Press the Color button to save the new setting when the setting is over. (Beep
Beep sound)
3). CONT setting
① Press Monitoring button when the handset is hung on properly. (LED Blinking)
② Press CONT button on the left while the screen is turned on. (Beep sound once)
③ Power LED is blinked as fast (CONT control mode)
④ Adjust the contrast as the user wants by pressing UP / DOWN button
⑤ Press the CONT button to save the new setting when the setting is over. (Beep
Beep sound)
4). RESET (Video Status initialization)
① Keep pressing the reset button for 3Sec while the screen is on (Video status will be initialized)
6 www.safemag.ru
www.safemag.ru
5. Installation
1. Installation Method of camera monitor
Note
① Avoid the range of direct sunlight
② Recommended height is pertinent from 1450 ~ 1500mm
③ Avoid the installation near magnetic activity, humid temperatures and gas
2. Installation Method of camera
SCREW T4X18(2EA)
Note
① Do not install the camera where it is exposed to Direct sunlight
② Keep cleaning up its lens to capture good views.
SCREW M3X8(1EA)
DRC-40CK www.safemag.ru
7
8
6. Wiring
1. Camera connector polarity www.safemag.ru
① Red: Voice
② Blue: GND
③ Yellow: Power (+12V)
④ White: Video
2. Wiring precautions
1) If high voltage cables are present in the vicinity, use a coaxial cable with metal outer casing.
2) If any internal wires are exposed through mis-wiring, it may cause a short and become a cause of malfunction or fire.
3) When connecting the monitor and camera, please make sure that the monitor power is off. (turn on the power after plugging the AC power cord into the outlet)
4) Attend the wiring as it is a polarity
5) make it short for camera 2 connector in case of installing only one camera
Note
※ Image and call quality can be down when the monitor is expanded randomly.
※ Interphone call sound could be different in case additional monitor is connected with Audio line depending on the type of monitor.
www.safemag.ru
www.safemag.ru
7. Parts List
Bracket for wall mount Manual
Body of CDV-40N
T4 X 18(4EA)
Screw for wall mount
M3 X 6(1EA)
Screw for body 4P Connector (2EA)
8. Miscellaneous
● Please carefully read this User's Guide before calling service man
After checking the entire check list, please contact customer service center.
We will do our best to make you satisfy with our services.
9. Specifications
Model
Rating Voltage
CDV-40N
100-240V~, 50/60Hz
During Operation : 10W(MAX) Consumption
Wiring method
Monitor
Communication
Call tone
Screen Display
Camera unit : 4 wires polarity, To an Interphone : 4 wires polarity
4" LCD (10.16cm)
Full duplex (Handset)
Door unit:electronic chime, Interphone:electronic buzzer
60±10sec
Distance from Camera
28m(Φ0.5mm) / 50m(Φ0.65mm) / 70m(Φ0.8mm)
(cable thickness)
Working Temperature 0 ~+40℃ (32℉ ~ 104℉)
Dimension(mm) 249(W)X158.5X47.6(D)(Based on Max height of handset)
9 www.safemag.ru
www.safemag.ru
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133
Web site : www.commax.com
PM0740N00010
Printed In Korea / 2011.03.104
www.safemag.ru
• Thank you for purchasing COMMAX products.
• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow instructions to use a product exactly.
• The company is not responsible for any safety accidents caused by abnormal operation of the product.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project