PE6108/PE6208/PE8108/PE8208
Energy Intelligence Solutions
PE6108/PE6208/PE8108/PE8208
eco PDU Power Distribution Unit
ATEN has developed a new generation of green energy power distribution units (PDUs) to effectively increase the
efficiency of data center power usage. The PE6108 / PE6208 / PE8108 and PE8208 eco PDUs are intelligent PDUs
that contain 8 AC outlets and are available in various IEC or NEMA socket configurations. They provide secure,
centralized, intelligent, power management (power on, off, cycle) of data center IT equipment (servers, storage
systems, KVM switches, network devices, serial data devices, etc.), as well as the ability to monitor the center's
health environment via sensors*.
eco PDUs offer remote power control combined with real-time power measurement - allowing you to control
and monitor the power status of devices attached to the PDUs, either at the PDU device or outlet level, from
practically any location via a TCP/IP connection.
eco PDU supports any 3rd party v3 SNMP Manager Software and eco Sensors (Energy Management Software).
eco Sensors provides you with an easy method for managing multiple devices, offering an intuitive and userfriendly Graphical User Interface that allows you to configure a PDU device and monitor power status of the
equipment connected to it. With eco Sensors, the Sensor-enabled eco PDU also offers comprehensive power
analysis reports which can separate by departments and locations, providing precise measurements of current,
voltage, power and watt-hour in a real-time display.
With its advanced security features and ease of operation, the eco PDU is the most convenient, most reliable,
and most cost effective way to remotely manage power access for multiple computer installations and allocate
power resources in the most efficient way possible.
* Sensors are optional accessories. A sensor-enabled installation is required to generate a more complete energy-efficient
data and chart. Higher sensor installation density is helpful to generate more accurate data.
PE8208A front view
1
PE8208A rear view
Model
PE6108A
PE6108B
PE6108G
PE6208A
PE6208B
PE6208G
PE8108A
PE8108B
PE8108G
PE8208A
PE8208B
PE8208G
Power Cord
(IEC C19 to)
NEMA 5-15P
NEMA 6-15P
IEC C14
NEMA 5-20P
NEMA 6-20P
IEC C20
NEMA 5-15P
NEMA 6-15P
IEC C14
NEMA 5-20P
NEMA 6-20P
IEC C20
Outlets
NEMA 5-15R
IEC C13
IEC C13
NEMA 5-20R
IEC C13 / C19
IEC C13 / C19
NEMA 5-15R
IEC C13
IEC C13
NEMA 5-20R
IEC C13 / C19
IEC C13 / C19
Monitoring
Level
PDU
PDU
PDU
PDU
PDU
PDU
Outlet
Outlet
Outlet
Outlet
Outlet
Outlet
Amps
Per Port
12A
12A
10A
16A
12A / 16A
10A / 16A
12A
12A
10A
16A
12A / 16A
10A / 16A
Total
12A
12A
10A
16A
16A
16A
12A
12A
10A
16A
16A
16A
Features
Power Distribution
• Space saving 1U rack mount design with rear mounting
• IEC or NEMA outlet models
• 3 digit 7-segment front panel LED shows Current / IP Address
• Remote users can monitor outlet status via web pages on their browsers
• Safe shutdown support
• Separate power for the unit's own power and its power outlets. The user interface is still accessible even when an
overload condition trips the devices' circuit breaker
Remote Access
• Remote power control via TCP/IP and a built in 10/100 Ethernet port
• Network Interfaces: TCP/IP, UDP, HTTP, HTTPS, SSL, SMTP, DHCP, NTP, DNS, 10Base-T/100Base-TX, auto sense, Ping
• eco PDU Power Management software – eco Sensors
• Supports SNMP Manager V3
Operation
• Local and Remote power outlet control (On, Off, Power Cycle) by individual outlets
• Power-on sequencing – users can set the power on sequence and delay time for each port to allow equipment to be
turned on in the proper order
• Easy setup and operation via a browser-based user interface
• Multibrowser support (IE, Firefox, Chrome, Safari)
• RTC support to keep the timer running during times of no power.
• Supports up to 8 user and 1 administrator accounts
Management
• Power status measurement at the PDU or Outlet level
• LED indicators for current and IP address at the PDU device and/or Outlet levels
• Real-time current, voltage, and kWH displayed in a browsed-based UI for monitoring at the PDU level (PE6108 /
PE6208) and at the outlet level (PE8108 / PE8208)
• Current and voltage threshold setting
• Naming support for outlets
• User outlet access assignment on an outlet-by-outlet basis.
• Event logging and syslog support
• Upgradeable firmware
• Multilanguage support: English, German, Traditional Chinese, Simplified Chinese, Japanese, French, Spanish, Italian
2
Security
• Two-level password security
• Strong security features include password protection and advanced encryption technologies – 128 bit SSL
• Remote authentication support: RADIUS
eco Sensors Energy Management Software
• Automatic discovery of all PE devices within the same intranet
• Remote real-time power measurement and monitoring
• Remote real-time power outlet management*
• Remote real-time environment sensor monitoring
• Plotting/Monitoring of all PE devices
• Exceed threshold alert through SMTP and Syslog
• Power Analysis Report
Benefits
3
Remote Power Control
By simply clicking a button on the UI, administrators can power control the
connected IT equipment with ease. There is no longer any need to move around
the data center turning equipment on and off.
Power Management
eco PDU products are designed with up to 8 outlets for easy data center
management. Each outlet can be individually controlled so that users can set the
power on/off sequence and delay time for each outlet separately. In addition, On/
Off scheduling allows administrators to configure start and shutdown.
Overcurrent Protection
Built-in overcurrent protection and recovery saves your money by eliminating costly
onsite service calls. With eco PDU products, you have the ability to access your data
center any time and deal with any situation that may occur – entirely immediately
and effectively.
Real-time Monitoring
With PDU/Outlet level metering, IT administrators can easily monitor the realtime current, voltage, kWH, power consumption, and circuit breaker status of all
connected IT equipment from a remote console.
Rack Environment
Monitoring
The eco PDU supports external, environment sensors that allow administrators to
monitor temperature, humidity, and differential pressure of the rack environment
from just about anywhere in the world.
Early Warning
Notification
The eco PDU permits data center administrators to set custom thresholds. When
levels exceed the user defined thresholds, designated recipients can receive alarm
notifications via SMTP email, SNMP traps, or Syslog. An audio alarm can also sound
and lights with blink at the local site.
Easy Operation – eco
Sensors
With eco Sensors energy management software support, the Sensor-enabled eco
PDU offers an intuitive and user-friendly Graphical User Interface – allowing you to
configure a PDU device and monitor power status of the equipment connected to
it via an ease-to-use interface.
External Authentication
Support
The eco PDU supports login authorization management from external sources –
RADIUS.
Advanced Security
• Secure 128-bit SSL encryption
• Two-level password security
• Login Failures – The number of consecutive failed login attempts and the time a
remote computer must wait before trying again can be set
• Configurable user permissions for outlet level access and control
Event Log Support
The eco PDU supports event log function that records all the events that take place
on – including user login/logout, timeout, outlet ON/OFF/Reboot by user, user add/
delete/changed, eco PDU add/remove and FW upgrade.
Optional Accessories
Sensors
Part No.
EA1140
EA1240
EA1340
Sensor
Temperature
Temperature / Humidity
Differential Pressure / Temperature
Cable Holders
For added safety, use ATEN Lok-U-Plug cable holders to secure the cables from your attached devices in place on the
eco PDU unit. Use only the ATEN Lok-U-Plug cable holders that have been specifically designed to work with the eco
PDU. Using any other kind of cable securing device could be highly dangerous.
Part No.
0X12-0017-300G
Cable Holder
Lok-U-Plug Patent Pending!
Note: Sensor probes and Cable Holders are optional accessories. A 4-sensor installation is required to generate a
complete energy-efficient data and chart. Higher sensor installation density is helpful to generate more accurate
data. 8-port models have 2 sensor ports built-in. All models come with a 10 foot input power cord.
Network
4
Specification
PE6108A /
PE8108A
Function
Power
Outlets
PE6208A /
PE8208A
PE6108B /
PE8108B
Direct
8 x NEMA 5-15R 8 x NEMA 5-20R
NA
NA
7 x IEC 320 C13
7 x IEC 320 C13
8 x IEC 320 C13 (Ports 2–8); 1 x 8 x IEC 320 C13 (Ports 2–8); 1 x
C19 (Port 1)
C19 (Port 1)
IEC
Sensor
2 x RJ-11
LAN
1 x RJ-45 (F)
Outlet Status
8 (Orange)
Selections
1-digit 7-segment (Orange)
PDU Current /
Outlet Current / IP
LEDs
3 (Green)
Current / IP
3-digit 7-segment (Orange)
Power
1 (Blue)
10/100 Mbps
1 (Orange / Green)
Link
Switches
1 (Green)
Sensor
2 (Green)
Reset
1 x Semi-recessed Pushbutton
Power
I/P Rating
1 x Non-fuse Breaker
100–120V~;
50/60Hz; 12A
100–120V~;
50/60Hz; 16A
100–240V~;
50/60Hz; 12A
1440W
1920W
Load Capacity
100–240V~;
50/60Hz; 16A
100–240V~;
50/60Hz; 10A
2880W
3840W
2400W
3840W
100-240V;
50/60Hz, 10A
100-240V;
50/60Hz, 10A
(C13)
100-240V~;
50/60Hz, 16A
(C19)
100-240V~;
50/60Hz, 10A
100-240V~;
50/60Hz, 16A
2.82 kg/2.87 kg
2.79 kg/2.87 kg
Per Port
100–120V~;
50/60Hz; 12A
100–120V~;
50/60Hz; 16A
100-240V;
50/60Hz, 12A
100-240V;
50/60Hz, 12A
(C13)
100-240V~;
50/60Hz, 16A
(C19)
Total
100–120V~;
50/60Hz; 12A
100–120V~;
50/60Hz; 16A
100-240V~;
50/60Hz, 12A
100-240V~;
50/60Hz, 16A
O/P Rating
Environment
Operating
Temperature
0–50˚C
Storage
Temperature
-20–60˚C
Humidity
Weight
Metal
2.77 kg/2.80 kg
Dimensions
(L x W x H)
2.77 kg/2.82 kg
2.82 kg/2.87 kg
2.79 kg/2.87 kg
43.24 x 21.93 x 4.40 cm
ATEN International Co., Ltd.
5
100–240V~;
50/60Hz; 16A
0–80% RH Non-condensing
Housing
Physical
Properties
PE6208G/
PE8208G
1 x IEC 320 C20
NEMA
Power
Outlets
PE6108G /
PE8108G
8
Power Inlet
Connectors
PE6208B/
PE8208B
3F., No.125, Sec. 2, Datong Rd., Sijhih District., New Taipei City 221, Taiwan
Phone: 886-2-8692-6789 Fax: 886-2-8692-6767
www.aten.com E-mail: [email protected]
Printed 07/2012 V4.0
© Copyright 2012 ATEN® International Co., Ltd.
ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd.
All rights reserved. All other trademarks are the property of their
respective owners.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement