Volkswagen

Informazioni legali

TV-Free

Universal video-in-motion Interface

INT CAS 500

Versione plug and play can bus

Version 06.12.2013 TF-U500

Per la legge, la visione delle immagini mentre si è alla guida è proibita, il guidatore non deve essere distratto. L’acquirente e’ pertanto responsabile verso se stesso ed altri per danni diretti o indiretti causati durante l’utilizzo.

Il prodotto è aggiornabile per renderlo compatibile a variazioni di software delle vetture attualmente nella lista di compatibilita’ o per l’aggiunta di vetture nuove.

Il software di aggiornamento sono disponibili gratuitamente.

1.

Prima dell’installazione

1.1.

1.2.

1.3.

Contenuto

Pin-out cablaggio

Funzioni degli switch

2.

Installazione

3.

Specifiche

4.

Supporto tecnico

1.1.

contenuto

Version 06.12.2013

TF-U500

1.2.

Pin-out cablaggio

COLORE CAVO

Posizione pin sul connettore femmina della centralina

Pin-No. fUNZIONE

●

GIALLO Pin 4 CAN-HIGH – connettere alla radio

●

Blu Pin 3 CAN-LOW – connettere alla radio

● ● GIALLO/NERO Pin 8

CAN-HIGH – connettere al veicolo

● ● BLU/NERO

Pin 7 CAN-LOW – connettere al veicolo

Pin 1 +12V permanente

●

ROSSO

●

NERO

●

VERDE

Pin 5

Pin 6

Massa

Attivazione funzione video in movimento

(Fornendo un +12V si sblocca la visione)

●

BIANCO

1.3.

Funzioni switch

Pin 2 Uscita alim. retrocamera (+12V DC 500mA)

Dip 1 – attivazione sblocco immagini

Dip 2 – nessuna funzione (in alcuni veicoli funzione retrocamera)

Dip 3 – nessuna funzione (in alcuni veicoli funzione attivazione icona TV)

Dip 4 – nessuna funzione

Dip 5 – Resistenza di terminazione CAN BUS lato veicolo

Dip 6 – Resistenza di terminazione CAN BUS lato radio

Version 06.12.2013

TF-U500

2.

Installazione senza cavo plug and play dedicato

Spegnere il veicolo e attendere che vada in sleep mode o, dove possibile, scollegare il polo negativo della batteria. scollegare la batteria.

Installare l’interfaccia e I rispettivi cavi CAN BUS . Separare I 2 cavi CAN BUS (CAN-HIGHT e

CAN-LOW) dal navigatore e collegarli all’interfaccia come da schema (imagine qui sotto).

Connettere il cavo rosso al +12V permanente e connettere il cavo nero a massa.

Le immagini in movimento si attivano e disattivano con lo switch 1 o in alternative con il filo verde.

Immagini sbloccate in modo permanente

Con lo switch N. 1 in ON, le immagini sono sbloccate in modo permanente, senza disturbare la navigazione.

Attivazione/disattivazione sblocco immagini manuale

Con lo switch 1 in OFF ,usare il cavo verde per attivare/disattivare lo sblocco immagini secondo la tabella sotto riportata:

Connect a switch to the green cable and connect the green cable to +12V ACC.

●

+12V

●

0V

= IMMAGINI SBLOCCATE

= IMMAGINI BLOCCATE

Note: Il cavo bianco se non utilizzato, deve essere isolato

Version 06.12.2013

TF-U500

Vetture con Audi Navi Plus RNS-E

Installare la centralina dietro l’unità di navigazione.

Veicoli compatibili Audi A3, A4, TT (8J)

Attention! Audi A6 with Navi Plus RNS-E have analog speed signal.

Vehicle/ navigation Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6

Navi Plus RNS-E OFF OFF OFF OFF OFF OFF

Cable colour Assignment

● ●

Red/Yellow +12Volt Permanent 15

●

Brown

● ●

Orange/Green

Ground Pin 12

CAN HIGH Pin 9

● ●

Orange/Brown CAN LOW Pin 10

Le informazioni riguardanti le connessioni sono indicative e

Potrebbero non corrispondere. Verificare sempre la corri-

Spondenza.

Pressione lunga del tasto „>|“ (circa 5 secondi) per attivare/disat-

Tivare la funzione. Quando la chiave vettura e in off, la centralina saraà automaticamente disattivata.

Lampeggio lungo retroilluminazione navi = SBLOCCO ON

Lampeggio corto retroilluminazione navi = SBLOCCO OFF

Note: Con lo sblocco attivo, non sara’ possible navigare

Version 06.12.2013

TF-U500

Vehicles with Audi MIB High (e.g. Audi A3 8V)

Place of installation is at the back side of the navigation unit

Compatible vehicles

Navigation

Audi A3 8V

MIB High - MMI® Navigation plus mit MMI® touch

Vehicle/navigation Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6

MIB High ON OFF OFF OFF ON ON


●

Red +12V permanent Pin 18

●

Brown

● ●

Orange/Violet

● ●

Orange/Brown

Ground Pin 17

CAN HIGH Pin 6

CAN LOW Pin 12

No liability for vehicle wire colors and pin definition!

Possible changes by the vehicle manufacturer. The given information must be verified by the installer.

The video-in-motion function is activated permanently without disturbing the navigation performance.

Version 06.12.2013

TF-U500

Vehicles with BMW NBT

Place of installation is at the back side of the navigation unit.

Compatible vehicles

Navigation

BMW 1series (F20/21), 3series (F30/31/32/33)

Navigation system Professional NBT with 8.8” monitor


Professional NBT ON OFF OFF OFF ON ON

Cable colour

●

●

●

Brown/Red

Brown

● Black

●

Yellow

Assignment

+12V permanent 15

Ground Pin 12

CAN HIGH Pin 11

CAN LOW Pin 9




Version 06.12.2013

TF-U500

Vehicles with ZAB

Compatible vehicles

Navigation


Bentley Continental Coupe GT, VW Phaeton till about 03/2010

ZAB


All vehicles

32-pin connector

Cable colour

●

●

●

●

Orange/Green

Orange/Brown

ON

Assignment

OFF

CAN HIGH Pin 16

CAN LOW Pin 32

OFF OFF OFF OFF

8-pin power harness

Cable colour

●

●

Red

Brown

Assignment

+12V Permanent Pin 7

Ground Pin 8

No liability for vehicle wire colors and pin definition! Possible changes by the vehicle manufacturer. The given information must be verified by the installer.


Version 06.12.2013

TF-U500

Vehicles with MYGIG

Compatible vehicles

Navigation


Chrysler, Dodge and Jeep

MYGIG RER/REW/REN/REP/RHW


All vehicles ON OFF OFF OFF OFF OFF


○ ●

White/Orange

○

White

CAN-HIGH - Pin 13

CAN-LOW - Pin 2

●

Red

● ●

Black/Green

+12V Permanent - Pin 1

Ground - Pin 12



Version 06.12.2013

TF-U500

Chrysler, Dodge, Jeep and Fiat Freemount with Uconnnect


Compatible vehicles

Navigation

Chrysler, Dodge, Jeep, Fiat Freemount

Uconnect with 8.4” monitor



Pin N0. Assignment

Pin 7 CAN-HIGH

Pin 18 CAN-LOW

Pin 12 +12V Permanent

Pin 1 Ground



Version 06.12.2013

TF-U500

Vehicles with RT3-N3 CAN and RT4

Compatible vehicles

Navigation


Citroen, Peugeot

RT3-N3 CAN, RT4


All vehicles OFF OFF OFF OFF OFF OFF

Cable colour

●

●

White

Grey

Assignment

CAN HIGH Pin 10

CAN LOW Pin 13



Longpress the “SRC”-button on the steering wheel (about 3 seconds) to activate/deactivate the video-in-motion function. When ignition is off, the video-in-motion interface will be automatically disabled.

Note: While the video-in-motion function is activated, the navigation performance is not possible!

Version 06.12.2013

TF-U500

Vehicles with NG4 NaviDrive and NG4 WipCom


Compatible vehicles

Navigation

Citroen, Peugeot

NG4 NaviDrive (Citroen), NG4 WipCom/WipNav (Peugeot)



Cable colour

●

●

White

Grey

Assignment

CAN HIGH Pin 10

CAN LOW Pin 13




Note: On some vehicles the navigation performance is affected and as long as the video-inmotion function is activated the navigation will not be working! In this case you have to connect the green cable as described in chapter “Exception: Vehicles with RT3-N3 CAN and

RT 4 without Source-button” and set Dip 1 to OFF.

Version 06.12.2013

TF-U500

Ferrari California with MYGIG


Compatible vehicles

Navigation

Ferrari California

MYGIG




○ ●

White/Orange

○

White

CAN-HIGH - Pin 13

CAN-LOW - Pin 2

●

Red +12V Permanent - Pin 1

Ground - Pin 12

● ●

Black/Green



Version 06.12.2013

TF-U500

Ford Edge with MYGIG

Compatible vehicles

Navigation


Ford Edge, Edge 2011

MYGIG



Connector A

Cable colour

●

●

●

●

Grau/Orange

Violett/Orange

Assignment

CAN-HIGH

CAN-LOW

Connector B

Cable colour o

●

●

●

White/Red

Black/Blue

Assignment

+12V Permanent

Ground

Connector A Connector B




Version 06.12.2013

TF-U500

Jaguar XF with Touch-screen navigation version 2

Place of installation is at the back side of the radio module.

Compatible vehicles

Navigation

Jaguar XF

Touch-screen navigation version 2


All vehicles ON OFF OFF OFF OFF ON


● ●

Yellow/Red +12V Permanent

●

Black

● ●

Grey/Orange

Ground

CAN-HIGH

● ●

Purple/Orange CAN-LOW

Attention: CAN-LOW and CAN-HIGH could be reversed at older vehicles (e.g. Grey/Orange = CAN-LOW)!




Version 06.12.2013

TF-U500

Jaguar XJ and XF with Touch-screen navigation version 3

Place of installation is at the back side of the monitor.

Compatible vehicles

Navigation

Jaguar XF X250 (from model 2012), XJ X351 (from model 2011)



All vehicles ON OFF OFF OFF OFF ON

Cable colour

● ●

Grey/Red (Pin 8)

●

Black (Pin 5)

Assignment

+12V Dauerplus

Masse

● ●

Grey/Orange (Pin 2) CAN-HIGH

● ●

Purple/Orange (Pin 1) CAN-LOW




Version 06.12.2013

TF-U500

LandRover with Touch-screen navigation version 1

Place of installation is at the back side of the radio module. (a hide-away box which is located behind the glove box or behind the factory navigation monitor).

Compatible vehicles

Navigation

Range Rover (Vogue) L322 (2005-2009), Range Rover Sport L320

(2005-2009), Discovery3 L319 (2004-2009)



Vehicles without rear-view camera or with after-market rear-view camera

ON OFF OFF OFF ON ON

Vehicles with factory rear-view camera ON ON OFF OFF ON ON

Note: Dip switch functions of the TV-500

Dip 1 – activation TV-free

Dip 2 – factory rear-view camera existing

Dip 3 – TV icon simulation

Dip 4 – no function

Dip 5 – CAN-bus termination resistor on the vehicle side

Dip 6 – CAN-bus termination resistor on the head-unit side

Version 06.12.2013

TF-U500

Range Rover Vogue

Cable colour

●

●

○ Yellow/White

●

Yellow/Blue

Assignment

CAN-HIGH Pin 9

CAN-LOW Pin 10

Sport & Discovery


● ○ Yellow/White

CAN-HIGH

●

Yellow CAN-LOW



Version 06.12.2013

TF-U500

LandRover with Touch-screen navigation version 2

Place of installation is at the back side of the radio module. (a hide-away box which is located behind the glove box or behind the factory navigation monitor).

Compatible vehicles

Navigation

Range Rover (Vogue) L322 (2005-2009), Range Rover Sport L320

(2005-2009), Discovery3 L319 (2004-2009)



Vehicles without rear-view camera ON OFF OFF OFF ON ON

Vehicles with rear-view camera



Dip 2 – rear-view camera existing

ON ON OFF OFF ON ON



Dip 5 – termination resistor CAN-Bus

Dip 6 – termination resistor CAN-Bus

Setting dip 2 to ON codes the factory rear-view camera input which is located on the brown

Fakra male connector of the factory monitor. When reverse gear is engaged, the navigation will automatically switch to this input. On vehicles with factory rear-view camera set Dip 2 to

ON, too.

Version 06.12.2013

TF-U500

Range Rover Vogue

Cable colour

●

●

○ Yellow/White

●

Yellow/Blue

Assignment

CAN-HIGH Pin 9

CAN-LOW Pin 10

Sport & Discovery


● ○ Yellow/White

CAN-HIGH

●

Yellow CAN-LOW



Version 06.12.2013

TF-U500

LandRover from 2012 with Touch-screen navigation version 3


Compatible vehicles

Navigation

Range Rover Evoque L538, Range Rover Sport, Discovery4 from year 2012

Touch-Screen Navigation 3 rd

generation


Vehicles without rear-view camera ON OFF OFF OFF ON ON

Vehicles with rear-view camera



Dip 2 – rear-view camera existing

ON ON OFF OFF ON ON



Dip 5 – CAN-bus termination resistor on the vehicle side

Dip 6 – CAN-bus termination resistor on the head-unit side

Setting dip 2 to ON codes the factory rear-view camera input which is located on the brown

Fakra male connector of the factory monitor. When reverse gear is engaged, the navigation will automatically switch to this input. On vehicles with factory rear-view camera set Dip 2 to

ON, too.

Version 06.12.2013

TF-U500

Pin-assignment factory monitor connector


●

●

●

●

Orange/grey

Orange/purple

CAN-HIGH Pin 2

CAN-LOW Pin 1



Version 06.12.2013

TF-U500

Mercedes Benz with Comand 2.0

Compatible vehicles

Navigation


Mercedes Benz C-class (W203) til 03/2004, CLK-class (C208 W208) all years, CLK-class (C209 W209) til 05/2004, E-class (W210) all years, G-

Model (G463) from 12/2000 til 03/2007, ML-class (W163) all years, SLclass (R230) til 06/2004, CL-class (C215) til 09/2003, S-class (W220) til

09/2003

Comand 2.0, Comand APS220/CD



Cable colour

●

●

●

●

●

Red

Black

Brown/Red

Brown

Assignment

+12V Permanent A Pin 4

Ground A Pin 8

CAN-HIGH C2 Pin 9

CAN-LOW C2 Pin 8


Possible changes by the vehicle manufacturer. The given information must be verified by the installer


Version 06.12.2013

TF-U500

Mercedes Benz with Comand 2.5

Compatible vehicles

Navigation


Mercedes Benz CL-class (C215) til 09/2003, S-class (W220) til 09/2003

Comand 2.5



Cable colour

●

●

●

●

●

Red

Black

Brown/Red

Brown

Assignment

+12V Permanent A Pin 4

Ground A Pin 8

CAN-HIGH C2 Pin 18

CAN-LOW C2 Pin 17


Possible changes by the vehicle manufacturer. The given information must be verified by the installer


Version 06.12.2013

TF-U500

Maybach and Mercedes Benz with Comand APS NTG 1

Place of installation is at the AGW-module (Audio-Gate-

Way). The AGW-module is placed in the luggage compartment at the left hand side behind the cover of the navigation unit or under the driver seat (SLK R171) or under the front passenger seat (SL R230).

Compatible vehicles Maybach (with green Fakra connector on backside of Comand),

Mercedes Benz CL-class (C215) from 10/2003 til 12/2005, S-class

(W220) from 10/2003 til 09/2005, SL-class (R230) from 07/2004 til

03/2008, CLS-Coupe (W219) from 10/2004 til 03/2008, E-class (W211) til 05/2008, SLK-class (R171) from 03/2004 til 03/2008

Navigation Comand APS DVD, Comand APS NTG1



Cable colour

●

●

●

Brown/Red

Brown

Assignment

CAN-HIGH Pin 2

CAN-LOW Pin 4




Version 06.12.2013

TF-U500

Mercedes Benz with Comand APS NTG 2/NTG 2.5/NTG 4 and Comand Online, NTG 4.5

VW Crafter with Comand APS NTG2


Compatible vehicles Mercedes Benz A-class (W169) from 09/2004 til 06/2008,

B-class (W245) from 09/2004 til 06/2008, C-class (W203) from 04/2004 til 02/2007, CLC-class (CL203) from 06/2008 til

09/2008, CLK-class (C209 W209) from 06/2004, G-model

(G463) from 04/2007 til 08/2008, GL-class (X164) til 06/2008,

ML-class (W164) til 06/2008, R-class (W251) til 06/2008,

Sprinter, Viano, A-class (W169) from 07/2008, B-class (W245) from 07/2008 til 10/2011, CLS-Coupe (W219) from 04/2008 til

12/2010, E-class (W211) from 06/2008 til 03/2009, G-model

(G463) from 09/2008, GL-class (X164) from 07/2008, ML-class

(W164) from 07/2008 til 10/2011, R-class (W251) from

07/2008, SL-class (R230) from 04/2008, SLK-class (R171) from

04/2008 til 02/2011, Viano, C-class (W204) from 03/2007 til

02/2011, CLC-class (CL203) from 09/2008, GLK-class (X204) from 09/2008, SLS (C197) from 03/2010, E-class (W212) from

04/2009 til 05/2011, E-class Coupe (W207) from 05/2009 til

05/2011, CLS-Coupe (C218) from 01/2011 til 05/2011, B-class

(W246) from 11/2011, C-class (W204) from 03/2011, C-class

Coupe (C204) from 06/2011, E-class (W212) from 06/2011, Eclass Coupe (C207) from 06/2011, CLS-Coupe (C218) from

06/2011, GLK-class (W204) from 01/2011, ML-class (W166) from 11/2011, SLK-class (R172) from 03/2011, SL-class (R231) from 2012, VW Crafter

Navigation Comand APS NTG2/NTG2.5/NTG4-204/NTG4-212,

Comand Online NTG 4.5


Vehicles with NTG2/NTG4-xxx ON OFF OFF OFF OFF OFF

Vehicles with NTG2.5/NTG4.5 OFF OFF OFF OFF OFF OFF

Version 06.12.2013

TF-U500

Cable colour

●

●

●

●

●

Brown

●

Red/Blue

Brown/Red

Brown

Assignment

+12Volt Permanent 15

Ground Pin 12

CAN HIGH Pin 11

CAN LOW Pin 9



On vehicles with NTG2/NTG4-2xx the video-in-motion function is activated permanently without disturbing the navigation performance.

On vehicles with NTG2.5/NTG4.5 select the “navigation level” on the instrument and press the “hang-up”-button on the steering-wheel for more than 3 seconds to activate/deactivate the video-in-motion function.

When the ignition is off, the video-in-motion interface will be automatically disabled.

Note: As long as the video-in-motion function is activated, the navigation of the command will NOT be working!

Version 06.12.2013

TF-U500

Vehicles with Mercedes Benz NTG 3 and NTG 3.5

Place of installation is in the centre console behind the DVD unit.

Compatible vehicles

Navigation

Mercedes Benz CL-class (C216) from 01/2006 til 05/2009,

S-class (W221) from 10/2005 til 05/2009, S-class (W221) from

06/2009, CL-class (C216) from 06/2009 with Dual-View

Comand APS NTG 3 and NTG 3.5


All vehicles ON OFF OFF OFF ON ON


● o Yellow/White

●

Yellow

CAN-HIGH Pin 1

CAN-LOW Pin 11



Version 06.12.2013

TF-U500

Porsche with PCM 2.1

Compatible vehicles

Navigation


Porsche Cayenne E1

PCM 2.1



Cable colour

●

●

●

●

●

●

Red

Black

Orange/Purple

Orange/Brown

Assignment

+12V Dauerstrom Pin 4

Ground Pin 8

CAN HIGH Pin 1 (Kammer C1)

CAN LOW Pin 2 (Kammer C1)




Version 06.12.2013

TF-U500

Porsche with PCM 3.0 and PCM 3.1

Compatible vehicles

Navigation

Limitations

Internal DVD video cannot be watched!

Vehicle/ navigation


Cayenne E1, 911, Boxster, Cayman, Cayenne E2, Panamera

PCM 3.0 and 3.1

Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6

Vehicles without rear-view camera or with after-market rear-view camera

ON OFF OFF OFF ON ON

Vehicles with factory rear-view camera ON ON OFF OFF ON ON

Cable colour

●

●

●

●

●

●

Red

Black

Orange/Purple

Orange/Brown

Assignment


Ground Pin 12

CAN HIGH Pin 11

CAN LOW Pin 9




Version 06.12.2013

TF-U500

Volvo with RTI 2011


Compatible vehicles

Navigation

Limitations

Vehicles with lane pilot,

Volvo S-series, V-series, XC60

RTI 2011 distance assistant and

The included green cable is used to activate the video-in-motion function (+12V = activated). city safety system

Lane pilot, distance assistant and city safety system do not work while TV-free is activated!

Fahrzeug/ Navigation

Dip

1

Dip

2

Dip

3

Dip

4

Dip

5

Dip

6

Vehicles WITHOUT extra equipment (lane pilot, distance assistant, city safety system)

Vehicles WITH extra equipment (lane pilot, distance assistant, city safety system)

ON

OFF

OFF

OFF

OFF

OFF

OFF

OFF

ON

ON

ON

ON

Cable colour

●

●

●

●

●

●

●

●

Purple/Red

Black/Grey

Grey/Orange

Purple/Orange

Assignment

+12V Permanent

Ground

CAN HIGH Pin 10

CAN LOW Pin 09



Version 06.12.2013

TF-U500

On vehicles without extra equipment and Dip1 to ON the video-in-motion function is activated permanently without disturbing the navigation performance.

On vehicles with extra equipment and Dip1 to OFF the included green cable is used to activate the video-in-motion function.

Connect a switch to the green cable and connect the green cable to +12V ACC.

●

+12V

●

0V

= TV-Free is activated

= TV-Free is not activated

Note: As long as the video-in-motion function is activated, the navigation will NOT be working!

Version 06.12.2013

TF-U500

Vehicles with VW MFD2/RNS2 und Skoda Nexus


Compatible vehicles

Navigation

VW Touareg; Golf 5, Touran, T5, Passat from year 2006, Caddy Live,

Skoda Octavia 2 and other vehicles

VW MFD2/RNS2, Skoda Nexus



Cable colour

●

●

●

●

●

●

●

Red/Yellow

Brown

Orange/Green

Orange/Brau

Assignment


Ground Pin 12

CAN HIGH Pin 9

CAN LOW Pin 10




Version 06.12.2013

TF-U500

Vehicles with VW RNS510/810, Skoda Columbus and Seat Trinax


Compatible vehicles

Navigation

VW Touareg, T5, Touran, Golf 6 and other vehicles

VW RNS510 and 810, Skoda Columbus, Seat Trinax



Cable colour

●

●

●

●

●

●

●

Red/Yellow

Brown

Orange/Green

Orange/Brau

Assignment


Ground Pin 12

CAN HIGH Pin 9

CAN LOW Pin 10




Version 06.12.2013

TF-U500

Vehicles with VW, Skoda MIB High

Place of installation is at the back side of the navigation unit

Compatible vehicles

Navigation

Golf 7, Octavia 3

MIB High – Discover Pro, Columbus

Vehicle/navigation Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6

MIB High ON OFF OFF OFF ON ON


●

Red

● Brown

+12V permanent Pin 18

Ground Pin 17

● ●

Orange/Violet

● ●

Orange/Brown

CAN HIGH Pin 6

CAN LOW Pin 12




Version 06.12.2013

TF-U500

3.

Specifications

Operation voltage

Stand-by power drain

Operation power drain

Power consumption

Temperature range

10.5 – 14.8V

<2mA

~60mA

~0,08W

-30°C to +80°C

Weight 44g

Measurements (box only) W x H x D 76 x 27 x 54 mm

Version 06.12.2013

TF-U500

Volkswagen | RADIO NAVIGATION MFD2-GOLF TOURAN CADDY-2004 | User manual | TV-Free INT CAS 500 Versione plug and play can bus

Informazioni legali

TV-Free

Universal video-in-motion Interface

INT CAS 500

Versione plug and play can bus

2.

Installazione senza cavo plug and play dedicato

Pressione lunga del tasto „>|“ (circa 5 secondi) per attivare/disat-

3.

Specifications

Related manuals

Connects2

CTSRV005.2

Connects2

CTSVW004.2

Caraudio-Systems

TF-U500

Caraudio Systems

TF-U500

Connects2

CTVIMCH01

Connects2

CTVIMMY01

Connects2

CTVIMMC01

RADIO NAVIGATION MFD2