Channel Plus | DA-550HHR | Specifications | Channel Plus DA-550HHR Specifications

Channel Plus DA-550HHR Specifications
C52_pg_268
8/13/07
10:14 AM
Page 268
SATV/CATV
section
14
Attenuators . . . . . . . .277
A/V Distribution Amplifiers
293~295
Amplifiers . .270~274, 279
A/V Switches . . . .294~296
Antenna Rotors . . . . .282
Baluns/Transformers
289~292
Combiners . . . . . . . ..269
Convertors . . . . . . . . .269
Diplexers.. . . . . . . . ..277
DSS Accessories .277~279
Ground Loop Isolators
273, 295
Ground Blocks/Accessories
283
HDMI Switchers/Amplifiers
294
Agile Audio/Video Modulators
Audio/Video Demodulator
SATV/CATV
LNBs/Feedhorns . . . . .279
Mast Mount Preamplifiers
274
Matrix Switchers . . . .296
Modulators/Demodulators
268, 269
Multi-Switches . .279~281
RF Amplifiers . . .270~274
Signal Combiners . . . .269
Signal Meters. . . . . . .281
Splitters/Diplexers
275~277
S-VHS Convertors . . . .295
Taps . . . . . . . . . . . . .275
Video Selectors . .294, 295
Wall Plates
See Section 13
The ZDM-806 is an agile audio/video demodulator.
This unit provides audio and video output from
any channel in the 50~806MHz frequency range.
The ZDM-806 is ideal for signal monitoring and
signal conditioning (audio/video processing and
demodulation) applications. Agile channel selection,
via front panel LED displays and channel up/down
buttons, permits on-the-fly channel changes. The
ZDM-806 takes a single channel in the 50~806MHz
frequency range (either VHF, UHF or CATV
channels) and demodulates the audio and video
information. Baseband audio and video are provided
as outputs. The ZDM-806 features a rock solid, PLL
synthesized frequency control. Frequency selection
is accomplished via front panel LEDs and channel
up/down buttons. A channel lockout mode is also
provided to prevent accidental channel changes.
Features: 50~806MHz agile demodulator, LED
display with convenient channel selection, superior
performance Specifications: RF: •RF input
frequency range: 54~806MHz •Channels: VHF,
UHF, CATV input level-range: -5~+30dBmv
•Noise figure: 8dB Video: •Output level: 1.0V p-p
•Output impedance: 75ohm General: •Power
requirements, voltage: 117, ±10% VAC
•Frequency: 60Hz •Power: 2.5W
Order #
33-2800
(ea.)
$219.00
Order #
33-3070
Front
14
Stereo Digitally
Tuned Modulators
Mfr. #
2002G
4004G
(ea.)
$779.00
Back
The Gold Series modulators distribute MTS Stereo
Surround Sound, along with a high quality video
signal, to multi-room locations. Digital phase
lock loop (PLL) tuning eliminates channel drift.
Exclusive DVD compatible technology eliminates
poor video performance, caused by DVD
copy-guard, common when modulating DVD signals.
125 digitally selectable channels for easy channel
selection. UHF channels 14~69; cable channels
54~94, 100~125. Local antenna or cable and
audio/video loop through. Full channel memory.
Order #
33-6860
33-6870
The AM Series includes professional quality, agile
audio/video modulators. These units provide audio
and video modulated RF carrier on any channel in
the 50~550MHz frequency range. Agile channel
selection permits on-the-fly channel changes and
reduces the need for large inventories of channelized
products. These modulators have a wide range of
standard and optional features that make them very
suitable for advanced SMATV and CATV systems.
The AM Series takes baseband audio and video and
modulates these signals onto any channel in the
50~550MHz frequency range. Featured options:
4.5MHz audio input, video input, BNC connector,
sub band output, video AGC, spectrum inversion,
balanced audio input, 600ohm, composite video
and 4.5MHz audio input, Z-TAC interface, digital
control-parallel, digital control-serial RS-232.
Includes all these options except sub-band
output. Specifications: RF: •Frequency range:
50~450MHz •Frequency range: 50~550MHz
•Channels: VHF, CATV (STD, HRC, IRC)
•Video input level: 1.0V p-p •Frequency
response: fv -0.5MHz~fv +4.2MHz: 1.0MHz
•Video signal-to-noise ratio: 60dB •Input
impedance: 75ohm •Audio input level: 140mV RMS
•Frequency range: 20Hz~20KHz •Input impedance
standard: 10Kohm, unbalanced General: •Power
requirements: •Voltage: 117VAC, ±10% •Frequency:
60Hz •Mfr. #AM-60-550
Inputs/Outputs
(ea.)
Dual channel
$459.00
Four channel
799.00
(2-up)
$449.00
771.47
Combiner
The ZHC-12 is a professional quality, passive and
active output combiner. This unit is designed for
use in headends to combine the outputs of multiple
modulators and processors. The ZHC-12 has twelve
(12) broadband input ports and one combined output
port. This combiner features high isolation between
ports due to an integrated directional coupler
design. The input ports of the ZHC-12 are
broadband, accepting signals in the 50~450MHz
frequency range. Specifications: ZHC-12 RF:
•Number of inputs: 12 •Frequency range:
50~450MHz •Insertion loss: 16dB •Isolation: 40dB
•Impedance-all ports: 75ohm Connectors (rear
panel): •RF input(s): “F” type, female •RF output:
“F” type, female •Test port (front panel): “F” type,
General: •Power requirements: •Voltage: 117VAC,
±10% •Frequency: 60Hz •Power: 10W Connectors
(rear panel): •RF input(s): “F” type, female •RF
output: “F” type, female •Test port (front panel):
“F” type, female
Order #
33-2820
Mfr. #
ZHC-12
(ea.)
$59.95
Agile Modulators
The consumer agile modulators are unique RF,
UHF and VHF hyperband modulators. Their design
allows the user to insert video from a VCR, laser
disc or any baseband video signal into their home
RF system. The #33-2025 and 33-2035 work on
UHF. The #33-2020 and 33-2030 work on VHF
hyperband or with CATV systems. The single
and dual channel units add flexibility to your
system. Perfect for whole house TV systems
and CCTV systems.
Order #
33-2020
33-2025
33-2030
33-2035
Description
VHF hyperband single output
UHF single output
VHF hyperband dual output
UHF dual output
(ea.)
$159.00
159.00
219.00
219.00
Digitally Tuned Modulators
The Theater 1001F is a digitally tuned modulator
that distributes high quality audio/video signal to
multi-room locations. The digital phase lock loop
(PLL) tuning eliminates channel drift. 120
selectable channels: UHF channels 14~69; cable
channels 60~94, 100~125. Binary Code Decimal
(BCD) channel selector for easy tuning. Isolated
right and left mono inputs improve audio
performance. Features: Switch type channel
select and full channel memory for power outages.
Order #
33-7255
Mfr. #
1001F
Channels
Single
(ea.)
$69.95
NET 30
Terms
268
Order Online
www.mcmelectronics.com
Digital UHF Modulator
The USM-8D is a low cost,
frequency stable, UHF
modulator developed for
use in adding satellite,
VCR, or security video
channels to an existing
home distribution system.
The frequency adjustable feature allows
multiple channel use at an extremely low cost.
Specifications: •Frequency range: UHF channels
14~69 and CATV channels 65~139 •Video input:
Composite •Output impedance: 75ohm •Output
level: 7dBmV •Power input: 115VAC, 60Hz, 5W
•Connectors: “F” for RF, RCA video and audio
•Mfr. #USM-8D
Order #
33-2740
(1-9)
$45.95
(10-up)
$42.49
Digital RF
Modulator
Accepts video
and audio from
a camera, VCR
or any other
video device.
Digital channel selection for UHF channels
14~69 or CATV channels 66~134. Antenna/CATV
input and built-in combiner. •Frequency range:
471.25MHz ~ 855.25MHz •Antenna input
frequency: 50MHz~900MHz
•Automatic gain control
Order #
82-8105
(ea.)
$79.99
C52_pg_269
8/14/07
3:53 PM
Page 269
SATV/CATV
TM
SLV A/V RF Modulator
Four Output RF Modulator
and Video Switcher
Converts up to four audio/video source inputs (DVD,
PVR, VCR, camcorders, video game systems, etc.)
to VHF for viewing on any TV. Switchable between
video sources and cable or antenna. Stereo A/V
and selectable to channel 3 or 4 output. Front panel
instant push button switching. Eliminates the need
for extra monitors. Separate VHF antenna/cable
input simplifies installation and switching of
components. UL listed, FCC approved.
Order #
33-9640
Mfr. #
MOD-41
The mini RF modulator
Front
is a compact, inexpensive
modulator that will
convert any composite
video source to VHF for
viewing on your TV on either channel 3 or 4.
Back
Its low signal loss enables it to deliver excellent
picture and sound quality. This modulator allows you
to connect additional A/V components, such as a DVD
player or a gaming system, to your TV when there
are no available RCA jacks. Inputs: Three RCA
(composite video and stereo audio), one “F”.
Order#
33-9775
(1-5)
$9.95
Accepts video and audio
from a camera, VCR or any
other video device and
modulates to television
channel 3 or 4. Built-in
selector switch to choose between A/V source and
antenna or cable TV.
RF Modulator
The Terk RF
modulator allows video components such as DVD
players, video games, VCRs and camcorders to be
viewed on televisions that are not equipped with an
available A/V jack. Selectable channel 3 or 4 output,
the modulator automatically switches to the video
source when a signal is detected. Terk’s RF
modulator is the ideal way to connect multiple
components to any television. Mfr. #MOD-34.
Order #
30-1595
(ea.)
$17.95
MINI RF
Modulator
Order #
33-9645
Mfr. #
MINI
(ea.)
$15.95
Auto Switching
RF Modulator
(ea.)
$25.45
Video RF
Modulator
•Lets you
Front
connect DVD,
VCR, selected
video games
and satellite
receivers to
older TVs’
Back
antenna/cable
inputs or to TVs
without audio/video inputs •Channel 3/4 selectable
Order #
M61138
(ea.)
$24.95
(2-up)
$23.65
Order #
SVM-22
SVM-24
Outputs
Dual
Quad
(ea.)
$215.90
323.68
(1-9)
$9.99
Digital RF
Modulators
The 5515, 5525 and 5545 are one, two and four
channel input modulators with loop–out capabilities
and integrated IR control. Each offers IR emitter
output jacks and the ability to remotely power a
DA-550 series or an DA-8200 series distribution
panel from up to 75' away. The 5500 series works
with both the 12 volt and 5 volt IR systems and
accessories. The 5515, 5525 and 5545 offer 75ohm
termination jumpers on all channels to loop–through
the video and audio signals. Features include: 1, 2
and 4 channels, push button programming, UHF
14~64 and CATV 65~125, 25dBmV output.
Front
Back
RF Modulator and Video Switcher
•Lets you connect components with S-video or
composite output (DVD, satellite) to a TV without
A/V jacks, by modulating the signal to RF •Ideal for
hooking up several components to a TV •Combines
RF modulator and S-video switcher into one unit
•Converts any input (S-video, composite, A/V, stereo)
to RF output •A/V and S-video switching •Composite
to S-video convertor •Front input, stereo input •Gold
plated connectors
Order #
CRF940
(ea.)
$25.95
Channel Combiners
Connect your DVD or
Sony Playstation to your
television for operation on
channels 3 or 4. Automatic
switching senses if DVD or Playstation is on and
automatically switches from cable TV, DSS or off air
antenna to the game or DVD. Modulator includes
audio video cable and RF cable.
Order #
33-7030
Order #
82-8100
S–Video Modulator
The new SVM series of modulators offers complete
MTS stereo encoding and S-video inputs in a full
component size rack mountable case. The SVM-22
and SVM-24 are two and four channel stereo
modulators with 25dBmV of output and easy push
button programming. The SVM series incorporates
S–video inputs that support both S–video and
composite video feeds with included adaptors.
Offering full MTS stereo with dbx noise reduction
and Dolby Pro Logic® compatibility makes the SVMs
perfect for integration into any home theater
system. The SVM series offers integrated IR control.
Each modulator has IR emitter output jacks and is
compatible with both 12 volt and 5 volt IR systems.
The SVMs, with their new desktop power supplies,
can remotely power a DA-550 or DA-8200 series
distribution panel from up to 75' away.
14
The TERK MINI modulator
is a compact, inexpensive
modulator that will convert
any video source to VHF for
viewing on your TV on either
channel 3 or 4. Its low signal
loss enables it to deliver
excellent picture and sound
quality. The MINI allows you
to connect additional A/V
components, such as a DVD
player or a gaming system, to
your TV when there are no available RCA jacks. It is
the optimum modulator for anyone looking to extend
the functionality of any TV without sacrificing space,
price or ease of installation. Most common A/V devices
are gaming systems and DVD players that take up
space around your TV. Conventional modulators,
usually set on top of your TV, can add to this disorder.
Unlike other modulators, the MINI is compact; it
reduces the clutter around your TV by easily
mounting on your wall or entertainment center. The
MINI was designed to be in-line, so that it can hang
or be mounted on a vertical surface and out-of-sight.
After first installation, there is no need to access the
MINI again. It features automatic signal detection
and automatically switches between A/V sources
when a signal is detected.
14
(6-up)
$9.53
RF Modulator
w/Antenna Switch
(ea.)
$21.95
section
•Combines channel 3/4 signal
(from VCR, computer, game, etc.)
with existing VHF signals not
including channel 3/4 •Also
removes bleedover of channel
3/4 modulated signal from
adjacent channels 2 and 4
Order #
33-255
33-1080
Combiner
3
4
(1-9)
$17.68
17.68
Order #
5515
5525-01
5545-01
Outputs
1
2
4
Stereo
Convertor
Convert
virtually any
make of mono
modulator to
stereo. 5601 goes between the audio source and the
current modulator. Features: 20dB of separation,
dbx noise reduction, Dolby Pro Logic compatible.
Order #
5601-01
(10-up)
$17.17
17.17
(ea.)
$72.00
117.70
187.55
(1-4)
$170.00
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
269
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
C52_pg_270
8/13/07
10:16 AM
Page 270
SATV/CATV
section
#DA-550BID
#2132
14
#2130A
#2131
#2174
#2172
#2100A
Whole House Infrared Remote Control
14
Control any infrared controllable video or audio
product from any TV location in the house. The
infrared codes are picked up by a target and
transmitted through the homes coax cable and
instantly repeated by each repeater/emitter. A 2100A
interface is used at any location a target or emitter is
used and the 2100 Series has numerous emitters and
target configurations. All components are powered
centrally from the coaxial cable panel, there is no need
for any additional power or wires.
Order #
2100A
Targets
2130A
2131
2132
2133
Emitters
2172
2173
2174
Description
In-wall interface with RF output
High Headroom
Distribution Amplifier
Whole House
Distribution System
The DA-550 series is
designed with the
highest headroom
available in a
distribution amplifier.
Traditional panels are
not designed to handle
the radical variations in
signal strengths that
have come about with
HDTV. New technologies
such as HDTV create
special problems for
current video
#DA-550HHR
distribution panels. The DA-550s
can handle an extremely wide range of input signals
from today’s NTSC and tomorrow’s digital TV. With
outputs to eight televisions, coax runs up to 150',
three inputs, one from a CATV or antenna and
two from modulators, the DA-550 is the heart of a
multi-room distribution system. The DA-550BID
offers a 5~42MHz return path for bi-directional
communication for use with cable modems and
pay-per-view applications. The DA-550HHR is used
with high performance antenna applications for off
air digital and NTSC signals. Additional features:
IR engine, remote power and expandable outputs.
Accepts A/V signals from video
sources like satellite, VCR and laser
disk and modulates to a user selected
channel for viewing throughout the house on an
unused UHF channel or cable TV VHF channel.
Each model accepts, amplifies, and distributes
broadband CATV or off air antenna to all TVs. The
#3025 allows IR control of video products from any
TV location using optional repeaters. Model #3025
has two A/V inputs and five outputs. Model #3015
has one A/V input and four outputs.
Order #
DA-550BID
DA-550HHR
(ea.)
$159.30
159.30
(ea.)
$35.00
IR remote mini-target
IR remote in-wall target
IR remote set-top target
IR target with coax input
68.50
52.50
40.00
40.00
Dual IR emitter
IR repeater/emitter
IR expansion block
12.00
6.50
28.00
All–In–Two Multi–Room RF Distribution Kit
Point–To–Point S-Video Distribution System
ChannelPlus now offers video and audio distribution
with full IR control over Cat 5 with the new SVC-10.
The SVC-10 can send S–video or composite video
with either digital or analog audio to any room up
to 1000' away. The new SVC-10 is designed for Cat 5
or 5e structured wire installations. The SVC-10 is
compatible with both NTSC and PAL video standards.
The two–piece SVC-10 system consist of a rack
mountable transmitter with inputs for S-video,
composite video, digital and analog audio along
with an IR emitter jack and RJ-45 output connector.
Each input has auto termination loop–through for
connecting a local video/audio system. The miniature
in–room receiver has one RJ-45 input and one each
S-video, composite video, digital and analog audio
outputs along with a 12V IR target input jack.
Features include: Auto termination loop through,
19" rack mountable (one space) and automatic
optical to coax digital audio conversion.
Order #
SVC-10
(ea.)
$269.00
NET 30
Terms
270
Order Online
www.mcmelectronics.com
Order #
3015
3025
Modulator CH Output
14~69U, 65~125V
14~64U, 99~125V
(ea.)
$51.75
119.00
RF Distribution
Amplifier
For systems with
up to eight TV
outlets and cable
lengths up to 150'.
The DA-8200
series provides
outputs to eight
televisions, three
inputs from an
off–air antenna or CATV and two modulator
locations. The compact design feature ensures a
quick installation for surface mount application
or in a structured wire enclosure like the 2619. The
DA-8200 series may be remotely powered from up
to 75' away by using a remote wall plate model
2010 or any 5500 series or SVM series modulator.
The DA-8200 series offers optional IR control
of connected video sources and whole house IR
integration with a 5V IR engine. The easy to
use 2133 target connects directly to the coax run
of any room and allows IR signals to be routed to
either a 2010 wall plate, 5500 series or SVM series
modulator. The DA-8200BID offers a 5~42MHz
return path for bi–directional communication for
use with digital cable interactive set–top boxes.
The DA-8200HHR is used with high performance
antenna applications for off–air digital and
NTSC signals.
Order #
Description
DA-8200BID Bi–directional amplifier
DA-8200HHR High head–room amplifier
(ea.)
$159.30
159.30
The All–In–Two Multi–Room RF distribution kit
includes all of the components needed to distribute
broadband RF, four locally generated signals to
eight TVs and IR remote control to three rooms in a
house. The kits include: 4 channel RF modulator
(5545), 3–input/8–output RF distribution panel
(DA-8200HHR or DA-8200BID), three rooms of IR
interface, expandable to eight rooms (2133) and IR
control of two video devices (two 2172).
Order #
5558BID
5558HHR
Description
Bi–directional amplifier
High head–room amplifier
(kit)
$500.00
500.00
Triple Play™
Caller TV™
Caller-TV places Caller-ID
information at the bottom of the television screen in
large easy to read letters. It uses an RCA video input
and output to display over any satellite, VCR, DVD,
laserdisc, video game or video camera signal for
10~15 seconds. Even without a video source,
Caller-TV makes its own blue screen with white
ID information which is retained until the next
call is received. Caller-TV requires activated
Caller-ID service from the local phone company.
Specifications: Power: 12VDC, 100mA.
Connection: Telephone: Two RJ-11 jacks.
Video in/out: RCA type jacks, composite video.
Order #
82-6845
Mfr. #
CTV1
Description
Single line
(ea.)
$57.00
This three channel digital modulator
is only 3.9" (L) x 5.5" (W) x 0.9" (H)
and weighs only 8.7 ounces. It is
the perfect modulator for security
installations, discreet monitoring, or single channel
satellite and audio/video applications. Easily allows
you to use cameras to see approaching visitors
or intruders at your home, business or apartment
on a standard TV or cable TV channel. Use this
modulator to distribute your VCR, Laserdisc, DSS
or cable box throughout your home. Mfr. #MM73.
Order #
82-2740
(ea.)
$174.00
C52_pg_271
8/13/07
10:09 AM
Page 271
SATV/CATV
DA-500A Amplifier
The DA-500A amplifier
is ideal for residential
cable systems or as an
antenna pre–amplifier.
The DA-500A offers a
more robust power
supply and greater
EMI rejection.
Specifications: Bandwidth:
40MHz~1GHz. Gain: 18dB +/- 1dB.
Order #
DA-500A
section
14
#33-8745
50MHz~1GHz Broadband Amplifier
(ea.)
$60.00
DA-506BID
Distribution Panel
Broadband Distribution Amps
The DA-506BID
distribution panel
creates an ideal
entry level product
for broadband
distribution. Encased
in an extruded aluminum shell, the DA-506BID
meets the needs of small distribution systems
which do not require IR control or modulator inputs.
The DA-506BID has one input for CATV or off–air
antenna and six outputs. Four outputs are for
up to 75' and two are for 150'. Additionally, the
0DA-506BID has bi–directional capabilities using a
5~42MHz return path on the CATV input allowing
for compatibility with cable modem and interactive
set–top boxes. Specifications: Bandwidth
54~806MHz. Gain: 20dB +/- 1dB.
Order #
DA-506BID
Order # Outputs
33-8745
1
33-8755
2
33-8760
4
Gain Adjust
(1-9) (10-up)
18dB
$29.99 $26.74
10dB
25.99 24.60
–
24.99 23.53
UHF-VHF-FM
Distribution Amplifier
(ea.)
$25.00
Low Pass Filters
A ChannelPlus low pass
filter is used on systems
when the broadband feed is supplied by a CATV
service. The filter removes all CATV channels
above the pass band, allowing insertion of locally
generated channels. In addition, the filters remove
cable system noise which degrades the picture
quality of the locally generated channels.
Pass Band (MHz)
40~380MHz
40~470MHz
40~600MHz
40~750MHz
(ea.)
$19.00
20.00
30.00
30.00
Cable Modem Isolator
Separates and isolates
noise/EMI caused by
higher cable modem
transmission signals.
Improves internet
download reliability
and reduces cable
modem “sync” problems.
Easily plugs into to coax wall
jack allowing dedicated runs
to a cable modem and TV tuner. •Frequency range:
10~770MHz •Insertion loss: <5.0db.
(1-9)
$5.99
(10-up)
$4.79
(1-9)
$149.00
(10-up)
$144.00
The TA-52 is a 52dB gain UHF/VHF/FM broadband
distribution amplifier designed to function as a
reliable, key component in medium and large MATV
systems. Signal control is provided through front
panel design. UHF/VHF input may be combined or
separated by use of a single throw switch. Low band
VHF, high band VHF and UHF frequencies have
separate gain controls and switchable 10dB input
attenuators. Features include switchable FM trap
and backmatch -20dB test point. Specifications:
•Bandwidth: Low band: 54~108MHz, High band:
174~216MHz, UHF: 470~806MHz •Gain minimum:
48dB •Output capability: 60dBmV (3 channels)
•Input attenuators: 10dB •Impedance, input and
output: 75ohm •Power requirements:
115VAC, 60Hz, 25W
Order #
33-2680
(1-9)
$199.00
(10-up)
$192.00
Order #
33-0890
(1-9)
$99.99
UHF/VHF/FM
12dB Amplifier
Features: •Low
noise •Lightning
protection •AC
power indicator •Two outputs •Low cost
Specifications: •Bandwidth: 54~890MHz •Gain:
VHF, 12dB; UHF, 11dB •Maximum input: VHF, 35dB;
UHF, 25dB •Maximum output: VHF, 47dB; UHF,
38dB •Noise figure: VHF, 6dB; UHF, 7dB •Power
requirements: 115VAC; 60Hz •Dimensions: 57⁄8" (W) x
15⁄8" (H) x 3" (D)
Order #
33-0445
(1-9)
$36.31
(10-up)
$23.67
Multi–Set Indoor
Distribution
Amplifiers
Push-Pull
Amplifiers
The CA-30 is
a high quality
push-pull
amplifier
producing
signals with extremely low distortion and harmonic
content. The CA-30 enclosure uses a black anodized
aluminum extrusion to assure reliable heat sinking
and corrosion resistance. Features: •Wide frequency
range: 54MHz~550MHz, 30dB gain, adjustable
slope control, adjustable gain control, input and
output test points, designed for CATV apartment
distribution systems Specifications: •Bandwidth:
54~550MHz •Gain: 30dB •Gain adjust range: 0~8dB
•Power requirements: 115VAC, 60Hz, 4W •Slope:
0~8dB variable •Noise figure: CA-30, 5.0dB
Order #
33-2670
(10-up)
$97.34
(1-9)
$149.00
(10-up)
$144.00
Model 3042 is ideal
for amplifying a
weak antenna or
cable signal. Models
3043, 3044, 3045 allows distribution of amplified
signals to 2, 4 or 8 television sets or other video
equipment without the use of additional splitters.
Order #
33-8970
33-8975
33-8980
33-8985
Mfr. #
3042
3043
3044
3045
Description
1 output
2 output
4 output
8 output
Gain
13dB
22dB
22dB
22dB
(ea.)
$37.50
34.95
49.95
73.71
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
271
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
14
Order #
NF64-70
Order #
33-2675
Features:
•Low noise •Two
switchable FM
traps •Separate
gain controls •AC
power indicator •50dB output capability •-20dB
monitor output •Fuse protected Specifications:
•Bandwidth: 54MHz~108MHz, 174MHz~216MHz,
470MHz~812MHz •Gain: VHF, 31dB; UHF, 36dB
•75ohm input/output •Power requirements: 115VAC;
60Hz •Dimensions: 83⁄4" (L) x 17⁄8" (H) x 33⁄4" (D)
•Fuse protected
(ea.)
$67.45
The NF64-70 notch
filter is designed to
eliminate television
channels 64 through 70 thus allowing a clean section
of the cable to insert locally generated signals. The
center of the notch is channel 67 at -55dB.
Order #
33-10395
Gain
36dB
15dB
11dB
UHF/VHF/FM
36dB Amplifier
Notch Filter
Order #
LPF-380
LPF-470
LPF-600
LPF-750
#33-8760
For broadband applications up to 1GHz including
cable television and digital television. Suitable
for medium sized distribution networks including
homes and small condominium complexes. High
gain low noise amplifier with built–in FM trap.
Specifications: Frequency range 40~1000MHz.
FM trap -20dB. Power: 120VAC.
The HDA-1000 is a low noise linear distribution
amplifier providing high power outputs at extremely
low distortion. The wide bandwidth allows the user
a single amplifier for all distribution frequency
applications; VHF, mid band, super band, hyper
band, ultra band and UHF. Features: •Wide forward
frequency range: 50MHz~1GHz, low noise figure,
30dB gain to 1GHz, surface mount strip line design,
designed for all broadband systems, built-in slope
(44dB typical, 55MHz~1GHz) Specifications:
•Bandwidth: 50MHz~1GHz •Forward gain:
50MHz~600MHz, 31dB, ± 2dB, 600MHz~1GHz,
32dB, ± 3dB •Power requirements: 115VAC, 60Hz
C52_pg_272
8/13/07
10:06 AM
Page 272
UHF/VHF/FM
25dB Amplifier
SATV/CATV
•Low noise
•Lightning
protection •AC
power indicator
•Switchable FM
trap •Low cost Specifications: •Bandwidth:
54~900MHz •Gain: VHF, 25dB; UHF, 22dB
•Maximum input: VHF, 18dB; UHF, 16dB •Maximum
output: 40dB (54~800MHz) •Noise figure: VHF, 5dB;
UHF, 7dB •75ohm input/output •Power requirements:
115VAC; 60Hz •Dimensions: 57⁄8" (W) x 15⁄8" (H) x 3" (D)
section
14
A
RF Amplifiers
Order #
33-0450
Low noise VHF/UHF/FM
B
signal amplifiers.
Variable gain control
–10dB. Built–in FM trap
(-20dB). Specifications:
Frequency range:
40~862MHz. Noise
figure: <7dB.
C
Power: 120VAC.
Fig.
A
B
C
Order #
33-8715
33-8720
33-8725
Outputs
1
2
4
(1-9)
$29.99
(10-up)
$28.32
VHF/FM 20dB Amplifier
•50~450MHz bandwidth •20dB
gain •40dB output capability
•117VAC power requirement
•Dimensions: 31⁄2" (W) x 21⁄4" (H)
x 11⁄2" (D)
Gain
30dB
25dB
20dB
(1-9)
$12.95
13.95
15.95
(10-up)
$12.43
13.47
15.37
Order #
33-270
(1-9)
$20.95
(10-up)
$20.07
VHF/FM 10dB Amplifier
•50~300MHz bandwidth
•10dB gain •30dB output
capability •117VAC power
requirement •Dimensions:
31⁄2" (W) x 21⁄4" (H) x 11⁄2" (D)
Order #
33-260
(1-9)
$13.95
(10-up)
$12.31
Four-Way
Amplified Coupler
B
A
C
RF Amplifiers
14
VHF/UHF/FM signal amplifiers for residential cable
and antenna television. 40~862MHz bandwidth.
<6dB noise figure. Operates on 120VAC.
Fig.
A
B
C
Order #
33-8730
33-8735
33-8740
Outputs
1
2
4
Gain
10dB
10dB
5dB
(1-9)
$8.31
10.39
13.49
(10-up)
$7.27
9.63
12.59
UHF/VHF/FM 25dB
Features: •Low
noise •High overload
capacity •Lightning
protection at RF
input •Heavy gauge
metal case •On-off
indicator light •Switchable FM trap Specifications:
•Bandwidth (MHz): VHF 54~300; UHF 470~890
•Gain: VHF, 25dB; UHF, 23dB •Maximum input
(dBmV): •VHF, 15; UHF, 17 •Maximum output
(dBmV): VHF, 40; UHF, 40 •Noise figure (dB): VHF,
low 5.4, high, 6.2; UHF, 14 •Power requirements:
117VAC •Dimensions: 65⁄8" (W) x 17⁄16" (H) x 33⁄32" (D)
Order #
33-290
(1-9)
$24.95
(10-up)
$23.64
UHF/VHF/FM 12dB
Features: •Low noise
•High overload capacity
•Lightning protection
•Heavy gauge metal
case •On-off indicator
light Specifications:
•Bandwidth (MHz): VHF 54~216; UHF 470~890
•Gain: VHF, 12dB; UHF, 10dB •Noise figure (dB):
VHF, 6; UHF, 7.7 •Input capability (dBmV): 40
(100mV), 20 (10mV) •Input: 75ohm •Output: 75ohm
•Power requirements: 117VAC; 60Hz •Dimensions:
65⁄8" (W) x 17⁄16" (H) x 33⁄32" (D)
Order #
33-280
(1-9)
$20.95
(10-up)
$19.24
NET 30
Terms
272
Order Online
www.mcmelectronics.com
(1-9)
$12.50
(10-up)
$11.82
Two-Way Amplified Coupler
•50MHz~550MHz
bandwidth •4~6dB gain
•117VAC power required
•One input, two outputs
•Dimensions: 31⁄2" (W) x
21⁄4" (H) x 11⁄2" (D)
Order #
33-1460
(1-9)
$13.95
(10-up)
$12.35
ZTA-25
Specifications: RF:
•Frequency range:
470~890MHz •Input level
min: -8.5dB •Input level
max: +22dB •Gain:
25dB(LB/FM), 22dB(HB),
18dB(UHF) •Noise figure: 5.0dB(VHF), 7.0dB(UHF)
•Output level max: +47dBmV •FM trap depth
(95~108MHz): -25 •Impedance all ports: 75ohm
General: •Power requirements: Voltage: 117VAC,
±10% •Frequency: 60Hz •Power: 3.0W •Mfr. #ZTA-25
Order #
33-2855
(1-9)
$26.01
(10-up)
$24.71
15dB Amplifier
Specifications: RF:
•Frequency range:
54~220MHz,
470~900MHz •Input
level min: -7.0dB
•Input level-max:
+18dB •Gain: 16dB
(50~22), 12dB (470~800), 10dB (800~900) •Noise
figure: 3.0dB (VHF), 4.0dB (UHF) •Output level max:
+44dBmV •Impedance all ports: 75ohm General:
•Power requirements: •Voltage: 117VAC, ±10%
•Frequency: 60Hz •Power: 4.2W •Mfr. #ZTA-15
Order #
33-2850
(1-9)
$16.95
The ZCM Series includes
professional quality,
broadband distribution
amplifiers, designed
for special purpose
applications in the MATV,
#33-2840
SMATV, private and
wireless cable markets.
These amplifiers cover
the 50~550MHz
frequency range and
provide low noise
amplification at a
reasonable cost. Two
models are available with
either 10 or 20dB of gain,
#33-2845
each capable of accepting
a relatively high input level. Specifications:
ZCM-101 RF: •Frequency range: 50~550MHz
•Gain: 10dB •Noise figure: 3.5dB •Impedance-all
ports: 75ohm General power requirements:
•Voltage: 117VAC, ±10% •Frequency: 60Hz •Power:
1.2W •Connectors (top panel): •RF input: Type “F”,
female RF output: Type “F”, female ZCM-201 RF:
•Frequency range: 50~550MHz •Gain: 20dB •Noise
figure: 3.5dB •Impedance all ports: 75ohm General
power requirements: •Voltage: 117VAC, ±10%
•Frequency: 60Hz •Power: 1.4W •Controls
(top panel): Tilt: Var. Control •Connectors
(top panel): RF Input: Type “F”, female
•RF output: type “F”, female
Order #
33-2840
33-2845
•50MHz~550MHz
bandwidth •1~3dB gain
•117VAC power required
•One input, four outputs
•Dimensions: 31⁄2" (W) x
21⁄4" (H) x 11⁄2" (D)
Order #
33-1475
Broadband
Distribution
Amplifiers
(10-up)
$16.43
Mfr. #
ZCM-101
ZCM-201
(1-9)
$14.95
21.50
(10-up)
$14.68
20.81
Multiple Dwelling
Amplifier
This
professional
quality, broadband,
indoor hybrid distribution
amplifier is designed for RF
distribution systems, such as apartment complexes,
hospitals, schools, prisons, and hotels. It is ideal for
those RF distribution systems whose input source is a
cable drop, the output of a MATV/SMATV headend, or
the output of a small CATV headend. The ACA 30-550
amplifier has a flat 30dB of operational gain, which is
variable using a built-in gain control. Variable slope
control is also provided, with an available range of
9dB. This amplifier uses a push-pull technology,
capable of delivering high output levels with low
distortion, even in systems with 110 channels of
programming. It is housed in a compact, aluminum
chassis that provides excellent heat dissipation,
allowing the ACA 30-550 to be operated at high
ambient temperatures with no degradation of
performance or reliability. The ACA 30-550 is provided
with an external power transformer for use with
117VAC power. The unit can also be powered directly
with 24VAC. The superior design guarantees long
service at an affordable price. This high performance
hybrid amplifier is the obvious selection when cost
and performance parameters are extremely tight.
Specifications: RF: •Frequency range: 47~550MHz
•Gain: 32dB •Noise figure(a): 8.0dB •Output level:
+44dBmV •Gain control range: 15dB •Slope control
range: 10dB •Impedance all ports: 75ohm
•Mfr. #ACA 30-550
Order #
33-2875
See page 295
for more ground
loop isolators.
(ea.)
$263.00
C52_pg_273
8/13/07
10:07 AM
Page 273
CATV Security Tool
SATV/CATV
•Precision machined,
high-quality security
tool for connecting and
disconnecting cables
protected by a security
sleeve •Long shaft fits
all types of sleeves
Order #
33-0025
33-0030
section
Description
Security tool
Security sleeve
(ea.)
$6.69
0.49
Ground Isolation
Transformer
5MHz~2.4GHz
bandwidth for use
in antenna, cable
television and satellite systems. Reduces the
effects of ground loops such as herringbone,
beat and audio hum.
Order #
33-8700
(1-9)
$17.95
(10-up)
$15.40
Voltage Blocking Coupler
•Blocks DC and low
frequency AC power •Solid
brass body with nickel
plating •Female to male
fittings •22 gauge spring
steel center pin •1~1000MHz
bandwidth •16dB return loss
•0.3dB insertion loss
Order #
33-0020
(1-9)
$2.51
(10-up)
$2.17
75ohm TV
Interference Filters
•Used in
cable or antenna
systems to remove
interference affecting
picture quality
Order #
33-0070
(1-9)
$2.79
(10-99)
$2.41
(100-up)
$1.89
Order #
33-2720
(1-9)
$13.64
(10-up)
$10.66
The ZTA Series are broadband distribution amplifiers designed for special purpose applications in the MATV, SMATV,
private and wireless cable markets. These amplifiers provide high output and low noise amplification at a reasonable cost.
Several models are available for VHF, FM, and UHF signal reception. The ZTA Series products are available with a number
of gain levels so that a unit can be selected to fit most systems. The amplifiers come with a variety of features, including
separate VHF and UHF antenna inputs, FM traps, and individual gain controls for VHF and UHF. The combination of split band
amplification and low noise input circuitry results in a wide dynamic range and exceptional output capability. The ZTA Series
products are UL and CSA approved and all models come with lightning and surge protected power supplies, thereby ensuring
years of reliable operation.
Broadband Amplifiers
The BIDA Series are
professional quality,
broadband, two-way capable,
indoor hybrid distribution
amplifiers that are designed
for RF distribution systems,
such as apartment
complexes, hospitals,
schools, prisons, hotels, and
a wide variety of similar
applications. The BIDA
Series is ideal for
multi-channel RF distribution systems whose
input source is a “cable drop” or the output of a
MATV/SMATV/CATV headend. Additionally, the
BIDA Series may be used as the launch amplifier in
a distribution network. These amplifiers use dual
push–pull hybrid modules, capable of delivering high
output levels with low distortion, even in systems
with over 100 channels of programming. Power
doubling models can be cascaded together with lower
distortion resulting than the push–pull amplifiers
allowing the system to maintain higher signal
integrity. The gain and slope controls are designed
between the hybrid modules for optimum noise
figure, input return loss and output capability. Test
ports for both the input and output are provided for
testing signal levels without interrupting service.
The BIDA Series come in a rugged, aluminum
chassis that provides exceptional heat dissipation.
This allows the BIDA Series to be operated at high
ambient temperatures with no degradation of
performance or reliability. The combination of
features and durable construction ensures that the
BIDA Series will provide years of reliable,
trouble-free service.
Order #
33-7815
33-7820
33-7850
33-7855
Bandwidth
MHz
49~550
49~750
49~860
49~860
Gain
dB
50
32
44
44
Description
Push–pull
Push–pull
Push–pull
Power doubling
(ea.)
$559.00
589.00
679.00
749.00
ZTA-45
Specifications: RF: •Frequency range:
54~216MHz, 470~806MHz •Input level min:
-7.0dB(LB/FM), -6.0dB(HB), -6.8dB(UHF) •Input level
max: +14dB, 36dB(LB/FM), 35dB(HB), 37dB(UHF)
•Noise figure: 6.0dB(LB/FM), 7.0dB(HB), 6.2dB(UHF)
•Output level max: 49dBmV •Gain control range:
18dB FM trap depth (95~108MHz): -18 •Impedance
all ports: 75ohm General: •Power requirements:
Voltage: 117VAC, ±10% •Frequency: 60Hz •Power:
15.0W •Mfr .#ZTA-45
Order #
33-2865
(ea.)
$226.00
14
In-Line 950~2150MHz Amplifier
Features: Die-cast
housing, low noise: 4dB,
high gain: 20dB, passes
DC through for powering
LNBs, sloped gain for
long cable runs, voltage supplied by the satellite
receiver Specifications: •Noise figure: 4dB •Gain:
950MHz: 15dB, 1450MHz: 18dB, 1750MHz: 20dB,
2150MHz: 21dB •Maximum output: 30dBmV (12
channels) •DC voltage: 15~18VDC (negative ground)
•Connectors: “F” type
14
Broadband Distribution Amplifiers
ZTA-35
Specifications: RF: •Frequency range:
54~216MHz, 470~806MHz •Input level min:
-7.0dB(LB/FM), -6.0dB(HB), -6.8dB(UHF) •Input level
max: +14dB, 36dB(LB/FM), 35dB(HB), 37dB(UHF)
•Noise figure: 6.0dB(LB/FM), 7.0dB(HB), 6.2dB(UHF)
•Output level max: 49dBmV •Gain control range:
18dB •FM trap depth (95~108MHz): -18 •Impedance
all ports: 75ohm General: •Power requirements:
Voltage: 117VAC, ±10% •Frequency: 60Hz •Power:
15.0W •Mfr. #ZTA-35
Order #
33-2860
(ea.)
$139.99
Antenna Preamplifiers
Satellite Line
Amplifier
The 5113IFD is a general purpose, low cost satellite
IF (950~2050MHz) line amplifier with 14dB gain
at 1450MHz and appropriate gain between 950 and
2050MHz to give cable slope compensation. Typical
applications include: Long runs of coaxial cable
(greater than 100') from satellite receiver to LNB,
satellite IF distribution system where signal levels
may have become marginal towards the end of the
system, splitting a signal many ways which might
cause excessive splitting loss. Includes two
amplifiers in one housing. This is for dual
cable, dual polarization systems.
Order #
33-9440
Mfr. #
5113IFD
(ea.)
$9.95
In–Line
Satellite Amplifier
Ideal for long cable
runs. 20dB gain. Die
cast housing. Powered
by satellite control voltage.
Order #
33-8645
(1-9)
$3.11
Superior performance rated, mast mounted
preamplifiers for any home installation requirement.
Featuring modern design, a high impact polypropylene case
and simplified mounting. Compact indoor transformer and
Power Adder are included with all models. Available to meet
any amplification requirement. Note: All amplifiers operate
on VHF LB, VHF HB and UHF. Individually packaged in
display boxes.
Order #
30-1135
Mfr. #
5120
30-1140
5123
30-1155
5124
Description
All channel amplifier.
Single 300ohm UHF/VHF
antenna input. 300ohm output.
All channel amplifier.
300ohm UHF/VHF antenna
input. 75ohm output.
All channel amplifier. Separate
300ohm UHF and VHF antenna
inputs. 75ohm output.
Amplifier
Gain
Ch.
dB
2~13
14
14~69
19
70~83
18
2~13
15
14~69
19
70~83
18
2~13
15
14~69
20
70~83
19
Noise
Figure
Ch.
2~13
14~69
70~83
2~13
14~69
70~83
2~13
14~69
70~83
dB
5.0
3.5
5.2
5.0
4.0
4.9
5.0
3.5
4.7
(ea.)
$71.70
72.95
70.65
NET 30
Terms
(10-up)
$2.67
OrderToll
Toll
Free
Order
Free
Fax
FAX
273
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
C52_pg_274
8/13/07
10:04 AM
Page 274
SATV/CATV
Bi-Directional
CATV Amplifiers
Digital amplifiers with
return path for use with
CATV convertors (pay per view) and cable modems.
Soldered back ensures isolation and signal integrity.
Specifications: Bandwidth: 54~1000MHz. Noise
figure: 3.5dB. Power: 12VDC, 250mA via included
adaptor (using “F” cable).
section
14
#33-917
#33-910
Order #
33-7110
33-7111
33-7115
33-7116
#33-915
DA-520A
Specifications: •Bandwidth:
5~950MHz •Gain: 11dB
•Maximum input: 20dB
•Maximum output: 31dB
•Noise figure: 4dB •Power
requirements: 15VDC •Dimensions: 21⁄2" (L) x 5⁄8"
(dia) #33-910 DC Passive: For satellite 70MHz
in-line amplification when power dividers, low
gain LNAs and down convertors require additional
gain. #33-917 Non-Passive: For MATV/CATV
applications when antenna preamplification and
line amplification is required. #33-915 Power
Supply: Provides power supply (15VDC) and
diplexer for #33-917 and 33-910.
The DA-520A is a
bi–directional amplifier
providing 20dB of forward
gain and 0dB reverse gain. Specifications:
Bandwidth: 54~806MHz. Gain: 20dB +/- 1dB.
Type
Non-Passive Amp
DC Passive Amp
Power Supply
(1-9)
$12.95
13.95
13.49
(10-up)
$11.41
11.93
12.59
In-Line Amplifier
DC line powered
amplifier for CATV
or antenna applications. Bandwidth is 5~950MHz.
Gain is 10dB. Use with #33-915 power supply.
Order #
33-2690
(1-9)
$6.96
Compatible
with the market
leader of structured
wiring panels, these
5~1000MHz, DOCSIS®
compliant amplifier modules are the ideal drop-in
replacement for CATV in-home signal distribution.
Improve your multimedia application with the
latest broadband technology for HDTV QAM signals.
Features include a durable, salt-spray-resistant
housing, weather-sealed “F” ports, and exceptional
surge performance.
Order #
33-10225
33-10226
In-Line Amplifiers
Order #
33-917
33-910
33-915
14
Forward Gain Reverse Gain (1-9) (10-up)
15dB
0dB (Flat) $44.95 $41.15
15dB
10dB
44.95 39.95
15dB
15dB
59.95 55.56
20dB
15dB
59.95 54.95
Broadband Structured
Wire RF Amplifiers
Order #
DA-520A
Description
6 output
8 output
Gain
+6.5dB gain
+10.0dB gain
(ea.)
$79.95
89.95
(ea.)
$67.99
Spartan 3 Mast
Mounted Preamplifiers
The industry standard 0064 DSB features a single 300ohm
VHF/UHF input and a single 75ohm output. Variations are
available for applications requiring separate VHF and UHF
inputs; 75ohm inputs; VHF only models and models with
active UHF and passive VHF passbands. They have been
designed for optimized performance with a supply voltage of
+12~+22VDC from a satellite receiver. Features include:
Surface-mounted components for automated production and
consistent high performance. Easiest installation in the
industry. High gain and ultra low noise figure from the latest
generation transistors gives optimum sensitivity. Separate VHF and UHF amplification plus the use of ultra
linear transistors improve output capability for optimum signal handling. Full lighting and surge protection.
Order #
33-8900
33-8905
Mfr. #
0064DSB
0264DSB
(10-up)
$6.44
Inputs
Input Imp.
1 (VHF/UHF)
300
2 (VHF & UHF)
300
VHF Gain
16
16
UHF Gain
23
23
Power Supply
Yes
Yes
(ea.)
$89.29
94.66
#30-2090
Indoor/Outdoor
In–Line Amplifier
Amplifies satellite and
terrestrial signals to
compensate for splitters and long cable runs. TERK
amplifiers are designed for optimum performance
in TV and satellite. Lesser quality amplifiers do not
offer extended bandwidth and gain flatness resulting
in poor picture quality. High quality die–cast
aluminum housing. Specifications: Frequency
range: 54~2150MHz. Slope compensation gain: 11dB
@ 54MHz, 20dB @ 2150MHz. Noise figure: <5dB.
Input/output impedance: 75ohm.
Order #
33-7220
Mfr. #
BIA-20BP
(ea.)
$24.99
10dB Micro Amplifier
10dB micro amplifier with
45~1000MHz bandwidth. Soldered
back ensures 130dB RFI
shielding. Heavy
duty tin plated
zinc housing.
Specifications:
Noise figure: 7dB.
Power: 12VDC, 100mA.
via included adaptor
(using “F” cable).
Order #
33-7125
(1-9)
$19.95
TITAN 2TM
Mast Mounted Preamplifiers
Outdoor
Mast Mounted
Amplifiers
These powerful UHF/VHF antenna signal amplifiers
are designed to overcome signal loss related to long
cable runs, splitters, and junctions. While an amplifier
will not create a signal, it will increase its power and
minimize disruptions. Kit includes mast mount
amplifier, 110VAC power inserter, and 6' coaxial cable.
Frequency range: 40~862MHz.
Order #
30-2090
30-2091
Mfr#
PA-18
PA-17
Gain
15db
17db
(ea.)
$39.95
49.95
The Titan range of mast mounted amplifiers has
been completely reengineered and updated. These
amplifiers represent the ultimate in preamplifier
performance. They are designed for use as an ultra
low noise, ultra high gain preamplifier for deepest
fringe applications and MATV headend applications.
Their very high signal handling also makes them
suitable for use as a mast mounted, ultra low noise
distribution amplifier for use in small MATV
systems. All models feature 75ohm, input and
output connections in line with modern headend
engineering practice. Models 7777 and 7778
cover both VHF and UHF bands with separate
amplification in each band for maximum signal
handling. They may be configured for either separate
or combined VHF and UHF inputs. They include a
switchable FM trap.
Order #
33-8950
33-8960
33-8965
(10-up)
$14.99
NET 30
Terms
274
#30-2091
Order Online
www.mcmelectronics.com
Mfr. #
Input
7775
UHF
7777 UHF/VHF
7778 UHF/VHF
VHF
Gain
N/A
23dB
16dB
UHF
Gain
26dB
26dB
23dB
(ea.)
$94.49
100.39
99.95
ChannelMax® Outdoor Antenna Amplifier
Amplifies weak UHF/VHF television signals. Increases
incoming signal by 20 times. Consists of antenna boom
mounted amplifier, UL/CUL listed power supply, 6' RG-59 coaxial cable, weather boot. Packaged in a clear, clam
shell blister pack for optimum consumer appeal. Specifications: Frequency range: 54-88MHz 174-806MHz.
Impedance: 300ohm (in), 75ohm (out). Gain: 13dB. Power
Order #
Mfr. #
(ea.)
required: 120VAC.
33-8945
3039
$39.99
C52_pg_275
8/13/07
10:10 AM
Page 275
FM Trap
Audio from the FM band
can overcome the audio on
adjacent television
channels 6 and 7 and
harmonics of the FM carrier. The FM trap
eliminates the entire FM band from 88 to 108MHz
reducing video noise and audio interference.
Order #
33-341
(1-9)
$2.50
A
(10-49)
$2.45
(50-up)
$2.20
B
C
U/V Directional Taps
•Provides high isolation from reflected signals
•Maintains constant 75ohm impedance on trunk
line •Tap at 12, 17 and 23dB
Order #
Description
(1-9)
A. One Output Zinc Die-Cast
33-1175
12dB
$2.89
33-310
17dB
2.99
33-1180
23dB
3.09
B. Two Outputs
33-1185
12dB
4.29
33-320
17dB
4.19
33-1190
23dB
4.29
C. Four Outputs
33-1195
12dB
5.99
33-330
17dB
5.89
33-1200
23dB
6.09
(10-49)
(50-up)
$2.61
2.70
2.74
$2.24
2.32
2.35
3.83
3.80
3.82
3.54
3.51
3.53
5.62
5.36
5.70
4.77
4.55
4.84
Directional Taps
Blonder Tongue offers a
complete line of professional
quality, economical indoor
directional couplers and
tapoffs with frequency
coverage to 900MHz. Several
models are available with four
way taps in varying attenuation values.
Value
8dB
16dB
A
(1-9)
$6.25
6.25
(10-up)
$5.92
5.92
D
Drop Enclosures
These drop enclosures will house and protect
components from the elements that corrode
and shorten their lives. Drop boxes produce a
professional appearance for cable TV and satellite
installations. The Econo Box combines the design
and features of a drop box with an economical
price. The Omni II box offers simplicity of
installation and professional appearance along with
a generous interior and the ability to seal the box
for drop security. The Residential Control Box is
designed to offer visual evidence of tampering and
provides for easy maintenance. The Omni III is
designed to facilitate the proper turning radius
of coaxial cables. The Omni III is wide and deep
enough to accommodate ground blocks, splitters
and power dividers used for dual cable satellite
installations. All boxes are UV resistant and come
in a neutral gray color.
Fig.
A
B
C
Order #
33-6940
33-6945
33-6950
D
33-6955
Blonder
Tongue
offers a
A
B
complete line
of professional quality indoor/outdoor couplers
and tapoffs covering frequencies up to1000MHz.
These products are available in both an L or T
style cases. The variety of loss values offered
guarantees that they have the right product for
your application. These products feature a durable
outdoor rated soldered back, cast housing, which
shields against EMI and RFI disturbances.
Order #
Loss(dB)
A. L Style-SCW models
33-2941
4
33-2946
6
33-2951
9
33-2956
12
33-2961
16
33-2966
20
33-2967
24
33-2968
27
33-2969
30
B. In-Line Style-SRT models
33-2971
4
33-2976
6
33-2981
9
33-2986
12
33-2991
16
33-2996
20
33-2997
24
33-2998
27
33-2999
30
(1-9)
(10-up)
$2.49
2.49
2.49
2.49
2.49
2.49
2.49
2.49
2.49
$2.26
2.26
2.26
2.26
2.26
2.26
2.26
2.26
2.26
2.49
2.49
2.49
2.49
2.49
2.49
2.49
2.49
2.49
2.26
2.26
2.26
2.26
2.26
2.26
2.26
2.26
2.26
14
A
High
Frequency
Vertical
Satellite
Splitters
B
C
D
E
High frequency vertically oriented splitters used
for satellite and DSS applications. Power passive to
operate in-line amps and multi-switches. Bandwidth:
5MHz~3000MHz.
Fig. Order #
1 Port Passive
A
33-10235
B
33-10236
C
33-10237
D
33-10238
E
33-10239
All Ports Passive
A
33-10240
B
33-10241
C
33-10242
D
33-10243
E
33-10244
Description
(1-9)
(10-up)
2-way
3-way
4-way
6-way
8-way
$5.99
7.99
8.99
15.95
16.95
$5.69
7.59
8.54
15.15
16.10
2-way
3-way
4-way
6-way
8-way
5.99
7.99
8.99
15.95
16.95
5.69
7.59
8.54
15.15
16.10
Satellite IF Power Dividers
B
C
section
Dimensions
Description (H) x (W) x (D)
(ea.)
Econo box 7.25 x 4.75 x 1.75 $4.09
Omni II box 5.75 x 5.0 x 1.25
2.89
Residential 8.75 x 6.25 x 2.75 6.09
Control box
Omni III box 6.5 x 9.0 x 1.75
4.79
These low cost, yet high
performance units have
many applications in satellite
IF distribution systems.
The 2201IFD, 2401IFD and
2801IFD pass DC power from
one output to the input (or in the opposite direction).
Thus only one receiver supplies LNB power and
controls any voltage switched polarization selection.
The 2202IFD and 2404IFD pass DC power from all
outputs to the input (or in the opposite direction).
Thus all receivers can supply LNB power. Care
should be taken to ensure the input of a receiver
will not be damaged by power from another receiver.
Reverse powering protection is provided in
many receivers and systems. These splitters are
particularly useful where several multi-switches
are combined together as there is no 0.8V drop across
the diodes as in 2212IFD, 2414IFD and 2818IFD.
Channel Master satellite IF multi-switches include
reverse powering protection. The 2212IFD, 2414IFD
and 2818IFD will pass DC power from any output
to the input. There is a 0.8V drop across the diodes
which are included to prevent one receiver from
passing power back to another receiver. They are
particularly useful in CATV headends as the
multiple receiver LNB powering provides
redundancy against losing LNB signals due
to a receiver failure. Unused outputs should be
terminated to achieve optimum flatness, return loss
and isolation. Channel Master terminators, Model
7184 (DC blocked) and Model 7190 (not DC blocked)
are recommended. Bandwidth: 950~2150MHz.
Order # Mfr. #
Two Way
33-9320 2201IFD
33-9325 2202IFD
33-9330 2212IFD
Four Way
33-9335 2401IFD
33-9340 2404IFD
33-9345 2414IFD
Eight Way
33-9350 2801IFD
33-9355 2818IFD
Description
(ea.)
One port DC pass
Two port DC pass
Two port DC pass, diode steer
$7.32
7.32
8.52
14
Order #
33-3000
33-3010
SATV/CATV
Solder Back Indoor/Outdoor
Directional
Couplers and
Taps
Vertical Splitters
•Nickel plated zinc die-cast housing •RFI shielding
•2GHz splitters feature one power passive port
marked on the splitter
Order #
5~1000MHz
33-4880
33-4885
33-4890
33-4895
33-4900
5~2150MHz
33-7140
33-7150
33-7155
33-7160
Description
(1-9)
(10-up)
2-way
3-way
4-way
6-way
8-way
$3.02
4.03
5.04
6.05
7.06
$2.59
3.63
4.15
5.19
6.23
2–way
4–way
6–way
8–way
5.99
9.99
15.95
17.95
5.65
8.99
13.34
15.40
Budget High
Frequency Splitter
High frequency for use in DSS
and satellite installations. One
port is DC passive. Bandwidth:
5~2400MHz.
Order #
33-8640
(1-9)
$2.07
(10-up)
$2.01
CATV FM Tapoff
•Zinc die-cast mounting
•Provides connection to stereo
tuner for MTV and other FM
broadcasts usually available
on cable TV lines
One port DC pass
12.95
Four port DC pass
12.95
Four port DC pass, diode steer 14.95
Order #
33-350
One port DC pass
28.68
Eight port DC pass, diode steer 30.00
NET 30
Terms
(1-9)
$4.49
(10-99)
$4.02
OrderToll
Toll
Free
Order
Free
(100-up)
$3.53
Fax
FAX
275
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
C52_pg_276
8/13/07
10:06 AM
Page 276
C
SATV/CATV
A
Power Passive
Splitters
Power passive
splitters
allow for
use of in-line
B
amplifiers
and other DC
powered devices. For applications to 1000MHz.
section
14
Fig
A
B
C
D
E
Order #
33-4400
33-4405
33-4410
Description
2-way
3-way
4-way
(1-9)
$2.51
3.02
3.52
A
2.4GHz Bi-Directional Splitters
(10-up)
$2.07
2.59
3.11
C
B
High Frequency Horizontal Satellite Splitters
High frequency splitters used for satellite and DSS
applications. Power passive to operate in–line amps
and multi-switches. Bandwidth: 5MHz~3000MHz.
Fig
Order #
1 Port Passive
A
33-4350
B
33-4355
C
33-4360
D
33-4365
E
33-4370
All Ports Passive
A
33-4375
B
33-4380
C
33-4385
D
33-4390
E
33-4395
Description
(1-9)
(10-up)
2-Way
3-Way
4-Way
6-Way
8-Way
$6.05
8.07
8.99
16.11
17.12
$5.19
7.27
8.23
15.55
16.59
2-Way
3-Way
4-Way
6-Way
8-Way
6.05
8.07
9.21
16.35
17.12
5.19
7.27
8.44
15.78
16.59
The in-line port design
of these splitters helps
to keep cables organized
and makes them
perfect for installations
in crowded areas.
Nickel plated zinc
die cast construction.
Bandwidth:
5~1000MHz.
Order #
33-4865
33-4870
33-4875
Description
2-way
3-way
4-way
(1-9)
$3.02
4.03
5.04
(10-up)
$2.59
3.63
4.67
Fig.
A
B
C
Order #
33-10245
33-10246
33-10247
Description
2-way
3-way
4-way
(ea.)
$2.79
3.19
3.79
A
Fig
A
B
C
D
Order #
33-2900
33-2905
33-2910
33-2915
Fig. Order #
A 33-070
A 33-0055
B 33-080
C 33-090
(1-9)
$8.39
13.84
(10-up)
$8.22
13.19
NET 30
Terms
276
Description
Two–way
Four–way
Order Online
www.mcmelectronics.com
C
C
(ea.)
$4.13
6.30
•Coaxial connections •Creates
signals from one signal source •Useful in connecting
picture-in-picture TVs with a cable box
Order #
M61000
M61001
M61002
Description
2-way
3-way
4-way
(1-9) (10-99)(100-up)
$1.79 $1.44 $1.24
2.09 1.81
1.65
2.39 1.11 1.04
0.94
B
C
RFI Splitters
•For use in applications where additional shielding
is needed •100dB case design exceeds FCC
requirements for RF shielding •25% more zinc
content than standard splitters •Case thickness
increased by 50% to obtain very good RFI
performance •Mounting tabs with screws
and grounding block •5MHz~1000MHz
frequency response
Splitters
Fig.
A
B
C
Description
2-way
2–way gold plated
3-way
4-way
A
(10-up)
$0.81
1.84
2.94
5.86
C
B
A
•Heavy-duty, die-cast design •Power passive
•Low thru-loss •950MHz~1750MHz •For use
with satellite systems and other
high-frequency applications
Description
2-way
4-way
(1-9)
$0.89
1.99
2.99
5.99
Digital Splitters
High-Frequency Splitters
Order #
33-0035
33-0040
Description
2-way
3-way
4-way
8-way
• Two–way and four–way
high performance splitters
•Gold–plated inputs/outputs
•Dual–grounded connections
•5MHz to 1GHz
•Precision cast body
Order #
DT2SP
DT4SP
Fig
A
B
B
(10-up)
$4.67
•High-quality, zinc die-cast that features
anti-corrosion plating •Power passive
•Precision threads •UHF/VHF/FM •5~900MHz
Performance to 1000MHz. 2, 3, 4 and 8 way
models. Die-cast housing. RF shielding. Mounting
tabs and grounding blocks.
(2-up)
$2.29
2.79
3.19
B
(1-9)
$5.04
Weatherproof Zinc Die-Cast Splitters
D
Indoor Splitters
DirecTV compatible high frequency performance to
3GHz. •Tin-plated zinc die-cast housing with soldered
back to achieve RFI -130dB •Waterproof and airtight
up to 30 P.S.I. with 4.55mm grounding hole and
stainless steel screws •Low thru loss and high
isolation with patent pending 360° insert pin.
Bandwidth: 5MHz~3000MHz.
Order #
33-4860
A
C
High Frequency RFI Splitters
(ea.)
$7.69
10.95
Mini hi-frequency splitter saves
space in confined areas. DC
passive one port. Attached
plastic cable channel provides
neat installations. Bandwidth:
5~2250MHz. Measures: 2" x 2" x 1"
(port to port).
B
A
14
B
Decription
2-way
4-way
Mini Hi-Frequency Splitter
C
A
•High-grade circuitry allows the connection of
components with minimal signal loss •Maximum
transfer of all your RF signals including higher
digital frequencies means quality reception and
excellent picture output •Splits a 75Ω coaxial signal
from cable TV, an antenna or a VCR for connection
to two TVs/VCRs •Frequency: 5MHz~2.4GHz
•Gold-plated input/outputs for reliable connectivity
•Dual-grounded connections •Precision cast body
Fig. Order #
A
DT24SP
B
DT44SP
In-Line Splitters
A
B
(1-9)
$0.99
1.95
2.19
Fig.
A
B
C
Order #
33-2130
33-2135
33-2140
Type
2-way
3-way
4-way
(1-9)
$2.11
2.92
3.42
(10-up)
$1.86
2.48
3.01
Splitter/Combiner
The Channel Plus
bi–directional
splitter/combiners
provide a 1GHz
bandwidth and are ideal
for antenna and coaxial cable operations. It can be
used to split a signal from a source or combine
signals from multiple sources onto one coax run.
Order #
2512
2514
2538
Description
2–way
4–way
8-way
Insertion
Loss
3.5 dB
8.0 dB
12.0 dB
DC & IR
Passing
Yes
Yes
No
(ea.)
$4.75
7.00
9.75
C52_pg_277
8/13/07
10:12 AM
Page 277
Four-Way
Couplers
Diplexer
Combines and separates your DBS
satellite and off–air signals. TERK
diplexers deliver sharper cut–off
frequencies, lower signal loss and
better impedance matching. Low quality diplexers
can cause signal loss and poor picture quality.
High quality die–cast aluminum housing.
Specifications: Frequency response: 54~2150MHz.
Impedance: 75ohm. Insertion loss: Antenna, 1dB,
Satellite, 2dB. Return loss: 10dB. Isolation: Antenna,
40dB, Satellite, 40dB. Mfr. #BDS-21BP.
Order #
33-7235
(ea.)
$14.95
SATV/CATV
•For indoor and outdoor use
•RF shielding exceeds FCC
specifications •Maintains 75ohm
impedance on trunk •Full
5MHz~900MHz operational
range •Use 75ohm terminator on
last trunk output (MCM #33-550)
Order #
33-1425
33-1430
33-1435
Description
16dB
20dB
24dB
(1-9)
$6.25
6.25
6.25
section
14
(10-49)
$5.92
5.92
5.92
(50-up)
$5.40
5.40
5.40
LNB Stacking Convertors
Satellite Diplexer
•Zinc die-cast housing
•RFI shielding •Power
passive satellite port
•Includes grounding screw
•Bandwidth: 40~2150MHz
Order #
33-8620
(1-9)
$2.59
(10-up)
$2.07
Order #
33-7135
Budget Diplexer
Zinc plated die cast diplexer
to combine off air television
signals with satellite for ease
of system installation. Power
passive one port. Bandwidth:
40~2150MHz.
Order #
33-4810
(1-9)
$2.99
(10-up)
$2.56
(10-up)
$9.35
6.17
(10-49)
$4.79
(50-up)
$4.49
(10-49)
$2.68
2.77
2.78
(50-up)
$1.77
1.84
1.84
•6dB attenuation
•5~900MHz frequency.
Order #
33-560
(1-9)
$2.79
The 4001IFD and 4002IFD
diplexers are used for
separating or combining
satellite signals at 950~2150MHz
with VHF/UHF signals at
54~806MHz. In addition, a DC
power pass is provided from the
satellite port to the common in order to pass satellite
receiver LNB voltage. The 4001IFD is Channel
Master’s standard performance diplexer. The 4002IFD
offers higher performance (much greater stopband
rejection) necessary when combining satellite
and VHF/UHF signals on to one cable because LNB
noise extends down into the UHF spectrum and can
degrade UHF TV reception if not adequately filtered
out before connection to the distribution cable.
(10-49)
$2.37
(50-up)
$2.24
Mfr. #
4001IFD
4002IFD
(ea.)
$9.00
17.88
Features: Nickel-plated,
solid brass body, monolithic
ceramic printed circuit
board, ensuring rugged
construction, etched
glaze-type resistors provide
±5% accuracy and excellent
return loss, small 1.375"
size, 22-gauge spring steel center pin, female
to male fitting, not DC passive. Specifications:
•Bandwidth: 100KHz~1750MHz •Return loss:
20dB typical •Accuracy: ±5%
Order #
33-2750
33-2755
33-2760
33-2765
33-2770
33-2775
33-2780
Description
3dB
6dB
8dB
10dB
12dB
16dB
20dB
This portable
satellite antenna
system is no bigger
than a briefcase.
Enjoy your DSS
system in your RV,
on your boat, while
camping or anywhere
you desire. Multiple
installation options
for mounting on a
wall, balcony rail,
pole, table and the
suction cup makes
mounting a breeze.
Includes: Dish
antenna, LNB,
“C” clamp, suction stand,
carry case and RG-6 cable.
Order #
33-4690
(ea.)
$109.00
High Performance LNB
75ohm In–Line
Fixed Mini-Type Attenuator Pads
Satellite Diplexers
Order #
33-9415
33-9420
•Nickel plated
solid brass body
•Monolithic ceramic
printed circuit board,
ensuring rugged
construction
•Bandwidth: 5KHz~950MHz •Not DC passive
•5% accuracy •22 gauge steel center pin •Small:
13⁄8" size •“F” type female to male •75ohm •Three
attenuators to choose from •Sorry–no mixing of
values for quantity pricing.
(1-9)
$3.09
3.19
3.19
(ea.)
$171.69
Portable Satellite
Antenna System
(1-4)
$30.29
dB
3
6
12
•Lightweight, easy to set up and ready to go •Bases
are completely and permanently assembled •Base
has built in level and compass •Convenient handle
for carrying and 25' of cable permanently stored in
the bottom of the base •Perfect for camping, fishing
trips, tailgating and picnics
Order #
RD-9046
Use with next
generation DBS dishes
for DISHNetwork and
DirecTV to switch between
programming on two
LNBs. Controlled by the
DISHNetwork receiver.
Order #
33-790
33-795
33-810
Portable/Remote
Digital Satellite System
14
(1-9)
$10.09
6.99
The TSDM-2150 is a compact
television antenna satellite
diplexer/combiner used in
applications that require
satellite I.F. distribution from 950~2150MHz. The
TSDM-2150 uses a rugged case that allows for
outdoor use. Specifications: •Frequency range:
Satellite: 950~2150MHz, television antenna:
40~860MHz •Connectors: “F” type •EMI
performance: >80dB
(1-9)
$4.99
(10-up)
$79.95
Fixed Mini-Types
VHF/UHF/Satellite
Diplexer-Mixer
Order #
33-2710
(1-9)
$89.95
Order #
33-6915
Combine off air television
signals with satellite for
ease of system installation.
Power passive one
port. Bandwidth:
5~800MHz/950~2050MHz.
Description
Commercial Grade
High Performance
Description
Down–convertor
DISHNetwork
Block Switch
Diplexer
Order #
33-4805
33-4800
Stacking convertors are
designed to allow two LNB
signals to share the same
coax. This allows you to
have all programming
(110° and 119°) at the receiver without running
additional cables. Down–converts the signal at
the receiver (not necessary with Sony
wide–band receivers).
(1-9)
$1.30
1.30
1.30
1.30
1.69
1.30
1.30
(10-up)
$1.03
1.03
1.03
1.03
1.34
1.03
1.03
DBS LNB for use with digital
satellite system dishes with
rectangular shaped tubes. Designed
to work with “D” shaped tubes as
well. Perfect low cost replacement
for damaged LNBs.
Order #
33-7435
Description
Dual LNB
(ea.)
$34.95
High Frequency
Attenuators
General purpose wide band
in–line attenuators to prevent excess signal
overloading of an amplifier or receiver. For ease of
installation one end is male the opposite is female.
Units are power passive. Bandwidth: 40~2150MHz.
Order #
33-9570
33-9575
Mfr. #
2806IFD
2810IFD
Description
6dB
10dB
(ea.)
$6.31
6.31
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
277
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
C52_pg_278
8/15/07
12:04 PM
Page 278
SATV/CATV
18" x 20" DIRECTV®
Multi-Satellite
Dish Antenna
section
14
H20 High Definition Receiver
With the DIRECTV H20 receiver,
you can access over 225 digital-quality
audio and video channels from
DIRECTV® in both high definition and standard
definition, plus you can connect an off-air antenna
to access free over-the-air local HD broadcasting.
Features: •Versatile HDTV connection options
include HDMI digital audio/video and component
video, as well as standard composite video and
RCA audio •1080i picture output resolution
formats •Dolby Digital 5.1 surround sound capable
•MPEG-4 AVC capable Includes: •Access card
•B-band convertor •Remote control and batteries
•Component, S-video, and standard A/V cables
•Phone and power cords •User guide (DIRECTV®
service and installation not included) •Mfr. #H20
®
DIRECTV® Standard Receiver
With the DIRECTV® D11 receiver, you
can access over 250 digital-quality
channels, plus access interactive
capabilities and a customizable on-screen program
guide. Explore and personalize all your viewing
options quickly and easily with the included remote
control. Features: •Interactive features include Mix
Channels, DirecTV Active, and MiniGuide •Parental
controls to set rating restrictions and spending limits
•Programming options like CHOICE, DirecTV
Spanish, XM satellite radio and pay per view movie
and event channels Includes: •Access card •Remote
controls and batteries •A/V and S-video cables
•Phone and power cords •User guide (DIRECTV®
service and installation not included) •Mfr. #D12-300
Order #
33-7701
(ea.)
$89.95
DIRECTV® R15 Receiver Plus DVR
14
Order #
33-7703
The DIRECTV Plus™ DVR receiver
lets you record up to 100 hours of
programs, and pause or control live TV.
With the R15 receiver you can automatically record
an entire season of your favorite shows, find and
record programs by title, actor, or director, listen to
theater-quality Dolby Digital sound, and schedule
recording up to 14 days in advance. Includes:
•Access card •Remote controls and batteries •A/V
and S-video cables •Phone and power cords •User
guide (DIRECTV® service and installation not
included) •Mfr. #R15
Order #
33-7702
(ea.)
$129.00
DIRECTV® HR20 High
Definition Receiver with DVR
The DIRECTV® HR20 receiver is
feature-packed with state-of-the-art
video and audio technology. Get up to 1080i resolution
for HD TVs, HDMI and component video outputs,
and an optical audio output for Dolby Digital 5.1
technology. Access both DIRECTV® programming and
off-air ATSC digital broadcasts, and record up to 30
hours of DIRECTV® HD programming, or up to 200
hours of standard programming on the 250Gb hard
drive. Features: •Four tuners; Two satellite receiver
inputs, two off-air ATSC HD tuners •Versatile HDTV
connection options include HDMI digital audio/video
and component video, as well as, standard S-video,
composite video, digital optical and stereo audio
•MPEG-2 and MPEG-4 enabled. Includes: •Access
card •B-band convertor •Remote control and
batteries •Component, S-video, and standard A/V
cables •Phone and power cords •User guide
(DIRECTV® service and installation not included)
•Mfr. #HR20.
Order #
33-7704
(ea.)
$329.00
(ea.)
$139.00
The TERK TRK-S26
is a DIRECTV
Multi-Satellite Dish
Antenna that will
help you get the most
out of your DIRECTV®
programming.
It provides three
integrated LNBs so
you can receive all
available DIRECTV®
programs, including HDTV and DIRECTV PARA
TODOST M programming. In addition, it saves
you money by eliminating additional hardware
installation that you would need to receive these
services. The TRK-S26 features four identical
outputs letting you connect up to four receivers for
a household system, and its compact size makes it
an ideal choice to use with RVs and motor homes.
A DIRECTV approved antenna is a necessity if you
are looking to receive the best from DIRECTV®
service. TERK’s TRK-S25 Multi-Beam Dish is a
high-performance solution for receiving the best
quality signal. It combines ease of installation with
versatility, quality and performance. Its 18" x 20"
size makes it easy to maneuver and its triple-head
LNB, with built-in multi-switch, are completely
integrated, making installation easier. The TRK-S26
can also be installed faster with its refined and
improved mounting system and its three-way tilt,
for easier rotation.
Order #
33-9670
Mfr. #
TRK-S26
(1-5)
$94.95
Sure Shot Dish
Exclusive “perfect curve”
manufacturing process
maintains a precise surface
tolerance, which allows
maximum signal reflectivity
and gain for the best
possible reception. These
antennas are built heavier
and stronger than
competitive models. Able to
withstand up to 120 mph
wind gusts, these
power-coated galvanized
steel antennas are backed
by a lifetime warranty. Dish
includes mount and mounting hardware,
LNB not included.
Order #
33-2615
Size
24"
(ea.)
$72.67
Hot Shot
Peel-N-Stick
DIRECTV® Ka/Ku
Dish for HD
Programming
DIRECTV®
International
Dish
With special LNBFs
designed specifically for
DIRECTV® worldDIRECT programming, this
dish is equipped with linear and dual LNBFs for
simultaneous reception of the 95° west and 101° west
international programming satellites. An optional
multi-switch is required to bring in both satellites.
Features: •Two outputs on the 95° and two on the
101° •Includes dish, LNBs, arm, and mount. Dish
surface dimensions: 24" (H) x 36" (W).
Order #
33-10415
(ea.)
$99.00
NET 30
Terms
278
Retrofit your DSS
dish with a Hot Shot
Peel-N-Stick de-icing
system. The Hot Shot
fits all 18" dishes, installs fast
and easy and solves snow and ice problems.
Order Online
www.mcmelectronics.com
The latest in satellite dish
antennas, this dish is specifically
designed for use with DIRECTV®
HR20 and H20 high definition
receivers. Capable of MPEG-4 compression, the
dish has three LNBs to receive 101°, 110°, and 119°
satellites, plus one to receive the new KA satellite
(99° and 103°) for local HD programming (where
available). Features: •Four outputs carry satellite
signal from all five satellites •Heavy-duty j-mount
with 2" outer diameter mast opening •LNB arm with
LNBS attached extends 23.5" from dish surface area.
Includes dish, j-mount mast, LNBs, arm and pole
attachment. Dish surface dimensions:
25.5" (H) x 29.5" (W).
Order #
33-10410
33-10411
33-10412
Description
Ka/Ku Dish
Short wall mount brace
Long wall mount brace
(ea.)
$139.00
14.95
14.95
Order #
33-3230
(ea.)
$119.00
(2-4)
$114.00
(5-up)
$107.00
Gain
38.4dB
39.8dB
(ea.)
$69.95
126.99
DBS Antennas
Help eliminate the
effects of rain fade and
low signal levels with
larger DBS antennas.
Gray powder coated finish
helps the antennas stand
up to weather.
LNB not included.
Order #
33-4925
33-4930
Diameter
30"
36"
C52_pg_279
8/13/07
10:11 AM
Page 279
Precision C and Ku Band LNBs
C
“C” and “Ku” band LNBs for use with “C” band
antennas. Professional feedhorns and commercial
grade LNBs assure high performance with low noise.
Input and output frequencies are in GHz.
Noise Input Output
Fig. Order # Band Figure Freq.
A 33-4695 C
17K 3.7~4.2
B 33-4700 C
15K 3.4~4.2
C 33-4705 Ku
0.6 11.7~12.2
D 33-4710 Ku
0.5 11.7~12.2
Freq.
(ea.)
.950~1.45 $24.95
.950~1.45 34.95
.950~2000 32.27
.950~2000 38.95
4DTV
Compatible
C/Ku
Feedhorn
with LNB
4DTV
compatible
C/Ku feedhorn
with digital “C”
band and “Ku” band LNBs. This feedhorn allows for
digital satellite viewing of both formats from one “C”
band satellite dish. Specifications: (C-Band) Input
frequency: 3.7~4.2GHz. Polarization: Linear, 3 wire
servo type. Output frequency: .950~1450GHz.
Noise figure: 20°K. (Ku Band) Input frequency:
10.95~12.5GHz. Polorization: Linear, three wire
servo type. Output frequency: .950~1450GHz.
Noise figure: .6dB max.
Order #
33-4720
(ea.)
$185.00
C/Ku Band
Feedhorn
D
section
14
ASTROTEL
High Stability C
and Ku Band LNBs
High stability
“C” and “Ku” band
LNBs for use with
“C” band antennas.
Professional
A
feedhorns and
commercial grade
B
LNBs assure high
performance with low
noise. Input and output frequencies are in GHz.
Noise Input Output
Fig. Order # Band Figure Freq.
Freq.
(ea.)
A 33-6805 C
20K 3.7~4.2 .950~1.45 $88.89
B 33-6810 Ku
0.6 11.7~12.2 .950~1.45 88.89
ASTROTEL
High Performance Dual
“C” Band/Ku-Band
Feedhorn
DSS Replacement Parts
MCM is an authorized distributor
for replacement DSS parts. You can order
original DSS replacement parts, components
and support accessories. Listed below are some
popular DSS parts. If you don’t find the part
you need, call our sales staff for assistance.
Order #
246492
221203
Order #
33-6825
RC926
D6706
Description
LNB, dual, light gray
Hardware kit, nut, bolt and washer
assortment
Wireless phone jack
72" antenna pole
(ea.)
$90.18
26.29
54.95
16.83
Dual LNB
Original OEM quality
LNB manufactured in
Japan. Light gray.
Order #
246492
(ea.)
$90.18
(ea.)
$199.00
Compact Multi-Switches
Easily connect 6
to 8 receivers to a
dual LNB. Off–air
input for local
antenna or CATV
broadband input
(return path
compatible).
Output filter keeps
intermodulation
and noise from
interfering with
off–air signal.
Active switch
design draws no
more current than
passive switches.
Fig. Order #
A
33-7275
B
33-7280
Mfr. #
SMS361F
SMS381F
A
B
C
Satellite IF
Amplifiers
A
Duo-Sat Amplifier
B
Description (ea.)
3x6
$94.95
3x8
134.95
(2-4)
$90.95
119.43
Duo-Sat amplifiers have
inputs for two dual LNBs and off air antenna. The
SBK5500NF is a system amplifier with -10dB gain
adjust for both LNB inputs. The system amplifier
provides system power to operate downstream
post-stage amplifiers. Duo-sat amplifiers maintain
the signal integrity throughout the entire system.
Order #
33-7348
Mfr. #
SBK5500NF
(ea.)
$549.95
(2-4)
$541.57
Duo-Sat Cascadable Multi-Switch
Duo-sat multi-switch cascadable to use in large multi-receiver
8 receiver outputs per multi-switch. Designed for use with Dishnetwork and DSS HD
and Plus receivers to receive high-definition programming and local to local broadcasts.
Polarity is selected by remote voltage and 22KHz signal provided by the receiver.
Must be used with system amplifier SBK5500NF that provides system power.
Order #
33-7365
Mfr. #
SMK5581F
Outputs
8
(ea.)
$319.95
(2-4)
$308.03
For use in
cascadable
satellite systems
these amplifiers
maintain signal integrity throughout a large system.
SBK3203NF provides power to the system and
acts as a launch amplifier and combines the local
antenna signal with the satellite IF. Post stage
amplifiers NVF220SR (dual amplifier) and NVF110F
(single amplifier) are powered over the coax cable and
operate in the 47~862MHz and 950~2200MHz
frequency bands. The SVF128F operates in the
950~2200MHz band and offers -10dB adjustable
gain. NVS126F operates in the 47~862 and
950~2200MHz bands and offers individual
-10dB gain adjustment for both bands.
Fig.
A
B
C
Order #
33-7330
33-7340
33-7345
Mfr. #
SBK3203NF
SVF128F
NVS126F
(ea.)
$349.95
109.95
239.95
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
279
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
14
(ea.)
$190.00
SATV/CATV
B
High performance
dual “C” band and
wideband dual
KU-band in one
ortho–mode
feedhorn. This
precision
feedhorn
incorporates
the latest ortho–mode
technology. It offers wideband reception on the Ku
and adjustable scalar ring with two sets of mounting
holes. Specifications: “C” band two port:
frequency: 3.7~4.2GHz, isolation: 35dB. “Ku”
band two port: Frequency: 10.95~12.75GHz,
isolation: 25dB. Note: LBNs not included.
Mfr. #PM-C/KU-OR-2+2.
C/KU
feedhorn
with “C”
band and
“Ku” band
LNBs. This
feedhorn
allows for
satellite viewing of both formats from one “C”
band satellite. Specifications: (C-Band) Input
frequency: 3.7~4.2GHz. Polarization: Linear, 3
wire servo type. Output frequency: .950~1450GHz.
Noise figure: 20°K. (Ku Band) Input frequency:
10.95~12.5GHz. Polarization: Linear, three wire
servo type. Output frequency: .950~1450GHz.
Noise figure: .6dB max.
Order #
33-4715
A
C52_pg_280
8/13/07
10:18 AM
Page 280
SATV/CATV
section
14
5 x 12 Multi-Satellite Multi-Switch
5 x 8 Integrated Multi–Switch
Wide Band
6 x 16
Multi-Switch
Expand your
current DIRECTV or
other satellite dish to 16
outputs with this weatherproof
6 x 16 multi-switch. Ideal for larger homes,
this six-input wideband unit supports up to 16
independently operating receivers or digital video
recorders, so every room in your house will be able to
enjoy quality satellite entertainment independently.
Supports the 2-LNB TRK-S2 dish, the 3-LNB
TRK-S26 dish, and the 5-LNB Ka/Ku dish which
is designed to support the latest DIRECTV
A3/MPEG 4-capable HD receivers. Features:
•Six satellite inputs; four inputs for the traditional
101°/110°/119°W LNBs, and for the two additional Ka
LNBs for 99°W and 103°W. •Two additional FlexPort
inputs commonly used to interface additional
DIRECTV satellites at locations such as 72.5°W
and 95°W. Specifications: •Input frequency
range: 250~2150MHz •Output frequency range:
250~2150MHz (each output) •Insertion loss:
-7dB (min.) •Cross polar isolation: 30dB min.
•Current consumption: 250mA (typical) 300mA (max.)
•Power adaptor: 100~240VAC 50~60Hz input; 21VDC,
1.5A output •22KHz tone output: 22 ± 4 KHz
continuous, 650 ±300mV p-p (power
adaptor included).
(ea.)
$189.00
14
Order #
33-10300
The BMS-58 allows up to eight satellite television
receiver connections to a single multi–satellite dish
and provides an additional off air antenna/cable
input to integrate all television options. With the
Terk BMS-58 multi–switch you can install a home
theater multiplex in no time by connecting up to
eight receivers with ease. There is no need to remove
integrated multi–switches already embedded in the
satellite dish. Simply connect the two SatA and SatB
cables to the BMS-58 and run to the receivers. The
BMS-58 has an ultra–low noise built–in amplifier to
eliminate signal loss and deliver the best possible
reception to every TV. The TERK BMS-58 is designed
to be waterproof making it rugged, durable and easy
to install. Mfr. #BMS-58.
Order #
33-9665
(ea.)
$74.95
HDTV
Compatible 5 x
8 Multi-Switch
Expand and
distribute your
DirecTV satellite
signal from any
phase II or phase III, 18" x 24" antennas, to up to
eight rooms. Also capable of combining off-air or cable
TV with satellite signals. Ideal for dual tuner DVRs.
Features: •Four satellite inputs and one terrestrial
TV input for up to eight satellite receivers •Built-in
amplifier to overcome splitter loss •Two dual LNB
selectable by 13/18VDC or 22KHz tone •Matrix
routes between any inputs to any outputs
•Rugged, weatherproof outdoor housing
•Bandwidth: 5MHz~2150MHz •Power:
24VAC power supply included.
(ea.)
$119.00
Satellite Multi-Switches
Channel Master® multi-switches are used to provide
satellite signals of either RHCP or LHCP polarization
from one dish at four or eight locations. In addition,
when required, they provide terrestrial VHF/UHF
signals diplexed on the same coaxial cable. At the
customer outlet, the satellite signals are separated
from the VHF/UHF signals with a diplexer such as
model 4001IFD. Model 6214IFD and Model 6228IFD
combine VHF/UHF (54~806MHz) signals with
satellite IF signals on one cable to provide up to
eight independently switchable wideband outputs.
Passive VHF/UHF processing allows complete
flexibility for VHF/UHF amplification. Models
6314IFD and 6328IFD amplify VHF/UHF
(54~806MHz) signals and combine them with
satellite IF signals on one cable to provide up to
eight independently switchable wideband outputs.
They should be used when all desired VHF/UHF
terrestrial TV signals can be received at comparable
levels from a stationary antenna or antenna system.
Order #
33-9490
33-9495
33-9500
33-9505
Mfr. #
Description
6214IFD
3x4
6314IFD
3x4
6228IFD
3x8
6328IFD
3x8
Amplified Terr. (ea.)
No
$81.36
Yes
79.95
No
139.00
Yes
179.00
NET 30
Terms
280
Order Online
www.mcmelectronics.com
3 x 4 multi-switch combines
local television or cable
television signal with satellite
signal for distribution to four
satellite receivers. Line powered
by the receiver’s LNB voltage.
Zinc die cast housing.
Specifications: Satellite: 950~2150MHz.
Terrestrial: 47~862MHz. Current: 60mA.
Order #
33-8625
Order #
33-8690
(1-9)
$20.76
(10-up)
$19.24
(1-9)
$79.95
(10-up)
$77.95
16 Way Magic Switch
The Magic Switch allows use of multiple receivers and
televisions with one dish and a dual LNB. The Magic
Switch combines UHF/VHF and satellite on one coax
cable and supplies both polarities at each receiver.
Magic Switch does not combine UHF/VHF with
satellite signals. Magic Switch can be line powered
by satellite receiver or externally powered adaptor
(not included).
Order #
33-3245
Order #
33-10250
Satellite Distribution Multi-Switches
Four satellite IF and one terrestrial TV input to 12
outputs to satellite receivers. Built–in satellite IF
amplifier compensates for splitter loss. LNB selection
by 14/18VDC and 22KHz tone provided by equipped
receivers. Built–in power supply provides power for
operation, amplification and operation of the LNBs.
(ea.)
$360.00
(2-4)
$350.00
(5-up)
$329.00
B
A
Satellite
Multi-Switches
•Designed for satellite
installations in
condominiums, apartment
complexes, hotels and
institutions •Only one
satellite dish is needed,
with the cascadable
multi-switches control
voltages are passed from
C
one multi-switch to the
next •Four inputs for multi-satellite (18" x 24") DSS
dishes •Switches polarization by 14/18VDC and
switches satellites by 22KHz tone •Line powered
via switching voltage supplied by the DSS receiver
•Terrestrial input for local antenna or cable
television, requires a diplexer for satellite/terrestrial
signal separation
Fig. Order #
Description
A
33-8655
5 x 4 multi-switch
Cascadable Multi-Switches
B
33-8660
5 x 4 multi-switch
C
33-8665
5 x 6 multi-switch
(1-9)
$24.95
(10-up)
$22.00
24.95
19.99
22.00
-
#33-4425
Compact Multi-Switches
Satellite Multi-Switch
Use multiple satellite receivers with one satellite
antenna with a dual LNB. The multi-switch
combines UHF and VHF with the satellite signal
to transmit them on one coax. These multi-switches
rely on power from the receiver for operation.
Order #
33-4415
33-4425
Description
(1-9)
4 way
$54.95
8 way (w/o DC jack) 99.95
B
A
#33-4415
(10-up)
$49.95
92.65
Half the size of comparable multi-switches measuring
only 41⁄2" x 31⁄2". Half the current consumption of
comparable multi-switches to operate effortlessly
from the receiver’s line voltage. Built–in satellite
IF amplifier. Die cast aluminum body and precision
die–cut “F” connectors.
Fig. Order #
A
33-8680
B
33-8685
Description
3x4
3x8
(1-9)
$14.95
19.95
(10-up)
$13.55
18.55
C52_pg_281
8/13/07
10:17 AM
Page 281
The TSMS-2150 is a
satellite multi-switch
used in all applications
that require satellite
I.F. distribution
from 950~2150MHz.
Intended for consumer use, it will allow the
residential user to take two LNB inputs plus an RF
input (40~860MHz) and provide four outputs. The
TSMS-2150 will route any of the inputs to any of the
outputs by utilizing the 14V/18V switching control
from the satellite receivers. To compensate for
insertion loss, it utilizes a built–in amplifier.
Specifications: •LNB input frequency:
950~2150MHz •TV antenna •Input frequency:
40~860MHz •Output frequency: Satellite:
950~2150MHz, television antenna: 40~860MHz
•Insertion loss: 950~2150MHz -5dB typical,
40~860MHz -4dB typical •Isolation: Horizon/vertical
-25dB, Output to output -14dB •DC passing
capacity: LNB 1 and 2: 550mA, VHF/UHF: None
•Connectors: “F” type
Order #
33-2715
(1-9)
$58.75
(10-up)
$51.50
3x8
Cascading Multi-Switch
Order #
33-7080
33-7085
Description
3 x 8 multi-switch
Power supply
The AcuTrac® 22 allows an installer to easily align a
multi–feed system by displaying LNB A and LNB B
signal strength measurement levels simultaneously.
The AcuTrac™ 22 features include: LCD display,
selectable audio on-off tone, receiver voltage output,
individual LNB current consumption, 22KHz tone and
coax cable test. AcuTracPro includes: Rechargable
battery pack, leather case and AC/DC chargers.
Order #
33-7391
33-7395
Mfr. #
Acutrac22
AcutracPro
(ea.)
$109.00
189.00
Satellite Meter
Use for easy
installation of
satellite receiver
dishes. The satellite meter operates on the power from
the receiver to LNB. Easy to read digital LCD display
with full text graphics menu and built-in audio tone to
aid in installation. Connect to single, dual or Phase III
LNBF, DishPro, or quad. Coax jumper cable not
included (MCM #32-580).
Order #
33-10035
Installations throughout
condominiums, apartment
complexes, hotels and
institutions can share one
dual LNB satellite antenna.
Cascading multi-switches pass the DC control
voltage and satellite signals from one multi-switch
to the next. External power supply powers the
built-in amplifier. An indoor diplexer (sold
separately) separates the combined satellite
and antenna signal at the receiver.
(1-9)
$109.00
18.95
(10-up)
$101.97
15.40
The satellite finder kit makes aligning a dish
simple and easy. The satellite finder attaches to the
output of the LNB or LNA and supplies power to the
LNB/LNA via the battery holder, or hook the finder
in-line with the receiver. Works with C or K band
satellites and DSS/DBS. Specifications: Frequency
range: 950~1550MHz, power supply: 12~18VDC,
60mA, input sensitivity: 62~80dB, impedance:
75ohm. Kit includes: •Satellite finder, compass,
RF jumper cable and battery holder all in a vinyl
carry case •Use #27-1335 battery pack for
DSS applications
Order #
33-1975
(kit)
$49.99
(ea.)
$119.00
Perfect 10 Satlook is a
measuring instrument
developed for exact
alignment and adjustment
of satellite dishes.
The instrument
features a 41⁄2"
B/W monitor
which either
shows normal
TV channel or
the frequency
spectrum 950~2150MHz. Detection of satellite
signals is made easy. Spectrum mode and the
spectrum can be expanded for correct adjustment
of the polarization. Switching between spectrum/TV
mode is made easy by the push of a button. LNB
polarization is switchable, 13V/18V and indicated
by an LED. The instrument is short circuit protected
when connecting the LNB. Power is supplied by a
built–in rechargeable battery and is recharged from
the external battery charger or the car adaptor.
Charging of the battery is supervised by a
microprocessor which senses when the charging
of the battery is maximized. Charging is indicated
with “CH” on the two digit LED display.
Order #
33-3255
(ea.)
$823.00
Suunto Tandem
Inclinometer/Compass
The Suunto Tandem is two precision
satellite tools in one. Slope/height
(inclinometer) measurements are
easily done through the sight to alert
you to possible obstructions. Accurate
satellite bearings can be found with
the liquid filled precision compass.
Mfr. #PVCOMAF.
Order #
33-7420
(ea.)
$199.00
Economical compass for easily identifying
satellite positions. Small size fits in
the palm of your hand. Top
closes to protect surface
from scratches.
Specifications:
•Directional accuracy: ±5° •Direction indication:
2°/scale •Dimensions: 72mm x 55mm x 30mm
(50-up)
$23.75
This hand held CATV/satellite
meter has been designed for
the technician to make quick
and accurate signal strength
measurements for both
CATV and satellite. This
powerful, simple to use tool
measures frequencies from
25MHz~1550MHz. •Measures
satellite from DirecTV,
Dish-Network, CATV and
broadcast signal strength
•Two rows of ten easy-to-read
indicator lights •Hand held
design, great for use with HDTV
•Includes 22KHz tone generator
for use with dual satellite systems
•Requires 9V battery (included)
Order #
33-9695
Mfr. #
M200
(1-9)
$449.00
(10-up)
$410.97
Order #
33-2050
(ea.)
$5.34
(2-10)
$4.87
Satellite Signal Level Meters
The 1004IFD, 1007IFD and 1008IFD are intended
to aid in the alignment of a satellite dish. They
include satellite IF (950~2150MHz) amplification
and a broadband detector. The detector drives a meter
and a variable frequency audio tone. The dish is then
aligned for maximum meter deflection or highest pitch
tone. A gain control allows a wide range of input
signal levels. The units are connected to the LNB
via a short coaxial cable. The 1004IFD output must
be connected to the satellite receiver in order to
supply power. The units operate from 11~24VDC
on the coaxial cable. Connection to the receiver
is optional with the 1007IFD and 1008IFD but
extends battery life between charges. All models
allow measurement of voltage on the coaxial cable.
The 1007IFD and 1008IFD will also measure LNB
current. The 1007IFD and 1008IFD includes an
internal rechargeable battery pack, carrying strap
and a wall plug recharging unit. The internal battery
pack allows a dish to be aligned before it is connected
to the satellite receiver. The battery pack is switchable
between 13 and 18V output, allowing either
polarization to be selected when used with a voltage
switched LNB. In US DBS applications, LHCP is
selected when the LNB voltage is nominally 17V.
Mfr. #
1004IFD
1007IFD
1008IFD
(ea.)
$105.48
263.64
348.00
Satellite Dish Level
Compass
(10-49)
$24.50
RF/Satellite Meter
Order #
33-9295
33-9300
33-9305
The Sat-Finder makes it
easy to find maximum
satellite signal. Simply
connect between the
satellite receiver and the LNB to precisely align
the dish in seconds. The Sat-Finder has a faster
response time than the receiver’s signal strength
meter for more precise adjustments.
(1-9)
$24.95
14
Satlook
Spectrum Analyzer
Sat-Finder
Satellite Meter
Order #
33-7725
section
(11-up)
$3.81
Attaches to the dish support to
quickly tell if the dish is plumb
and level. Mfr. #PVLEV1.
Order #
33-7425
(ea.)
$2.99
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
281
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
14
Satellite Finder Kit
SATV/CATV
AcuTrac® 22
Digital Satellite
Signal Level
Meters
Satellite I.F.
Multi-Switch
C52_pg_282
8/13/07
10:03 AM
Page 282
SATV/CATV
#30-2071
#30-2070
Uni-Directional HDTV UHF Antennas
section
14
Antenna Rotator with
Memory and Remote Control
The remote controlled antenna rotator
with 12 position memory is ideally
suited for use in today’s home theater
systems. Micro–processor
control allows
for up to
12 memory
positions to be
stored. Dual
display shows
both direction
and memory
position. Uses standard three conductor rotator
wire (#24-3080).
Order #
30-1101
(ea.)
$79.95
Economical
Antenna Rotator
Our economical
antenna rotator helps
improve TV and FM
reception. Two piece
connects via three
wire rotator cable.
Adjustable clamp
accommodates
mast up to 11⁄2".
Order #
30-1100
These powerful, weather-resistant, outdoor antennas are
ideal for medium to long range applications that require the
gain of the antenna to be concentrated in one direction. The
Yagi style design effectively rejects off axis signals from structures that cause multipath interference, and the corner reflectors on the back of the antennas improve the
forward gain of the antenna resulting in exceptional performance across the entire
UHF spectrum (channels 14~69).
Range
Gain
Dimensions
Order # Description
miles
db
(H) x (W) x (L)
(ea.)
30-2070 Compact, 15-element, short-range
1~30
11.0
14" x 13" x 35"
$47.50
30-2071 Mid-sized, 43-element, long-range
15~60
15.7
19" x 18" x 62"
63.95
30-2072 Large, high-gain, 91-element, long range 50~70+ 16.7
22" x 20" x 93"
89.95
#30-2072
Multi-Directional
HDTV UHF
Antennas
Multi-directional antennas are
designed to work in locations where
the transmitters for digital stations
are spread apart. These popular HD
antennas utilize a bowtie design that
provides a strong gain across the entire
UHF spectrum (channels 14~69). They
#30-2065
function incredibly well in areas where
flexible aiming is required and feature
a weatherproof construction that resists extreme wind loading.
#30-2066
#30-2067
Order #
Description
Range
Miles
Gain
Dimensions
(H) x (W) x (D)
30-2065
30-2066
30-2067
Indoor/outdoor, low-profile, short range
Outdoor, most popular, mid-range
Outdoor, high-gain, long range
1~30
15~55
50~70
11.4db
13.7db
15.8db
12" x 19" x 4"
29" x 19" x 4"
29" x 42" x 4"
(ea.)
$39.95
54.95
89.95
(ea.)
$59.95
14
Uni-Directional HDTV VHF/UHF Antennas
Antenna Rotator
•Heavy-duty motor
handles large antennas
•Extra strong machine
cut gears won’t bind
•Brake pads hold firm
•Tested to 70 mph winds
•Requires three–wire rotator wire (#24-3080)
Order #
30-1020
Designed for use in areas where popular HDTV stations are broadcast on the
VHF band (channels 2~13), these antennas receive both UHF and VHF signals.
These antennas have been specifically designed for combined VHF and UHF
reception for full coverage. All of these antennas are unidirectional so they must
be pointed towards the transmitters to achieve optimum performance.
Order #
30-2075
30-2076
30-2077
Description
Medium-gain, 10-element
High-gain, 15-element
Ultra-high gain, 21-element
Channels
VHF
UHF
(7-13) (14-69)
(2-13) (14-69)
(2-13) (14-69)
Range
Miles
1~25
1~45
15~65
Dimensions
Gain
(W) x (L)
(ea.)
7.8db
69" x 32" $47.50
10.8db 95" x 43"
63.95
12.9db 110" x 59"
79.95
(ea.)
$74.95
FM
Turnstyle
•Offers the gain of a folded dipole
with an omni–directional pattern
•Works in areas where stations are
situated in many directions
Order #
30-855
(ea.)
$19.95
SMARTenna®
UHF/VHF Antenna
Ideal for suburban/
metropolitan area television
reception. Omni–directional
antenna with built–in
amplifier. Specifications: Bandwidth: 54~806MHz.
Gain: 20dB. Impedance: 75ohm. Power: 120VAC
via included adaptor. Diameter: 22".
Order #
30-1710
Mfr. #
3000A
#30-1075
#30-840
#30-850
#30-1015
(ea.)
$109.95
Scanner Antenna
Covers VHF/UHF public service bands
30~1300MHz. Includes 300 to 75ohm
matching transformer and 50' RG-6
coax cable.
Order #
30-1380
(ea.)
$39.95
NET 30
Terms
282
Order Online
www.mcmelectronics.com
Omni–State
Omni–Directional Antenna
The Omni–State antenna
provides excellent reception
of VHF and UHF channels
in most viewing locations.
Measures 21" in diameter and
has a 20dB built–in amplifier.
Operates on 120VAC with
the supplied adaptor. Optional accessories for
installation are available.
Order #
30-1335
(ea.)
$74.95
#30-1071
UHF/VHF/FM Antennas
•300ohm output, includes
75ohm transformer
Order #
30-1075
30-840
30-1015
30-850
30-1071
Description
Boom Length Elements (ea.)
Discovery D-9000
180"
91 $89.95
Colorstar 480
150"
48
64.95
Color King 5885
90"
34
40.35
Color King 5884
58"
25
30.25
Compact Antenna
70"
16
27.59
C52_pg_283
8/13/07
11:11 AM
Page 283
#30-1635
SATV/CATV
section
#30-1655
#PR-7010
14
#PR-7015
#30-1640
In-line Surge
Protector
#PR-7042
#PR-7032
Protect your
cable modem, tuner,
convertor, decoder,
and satellite
receiver from power
surges and spikes caused by lightning strikes. Plugs
directly into coax line. Specifications: •Frequency
range: 5~2,400MHz •Insertion loss: 1.5dB max
•Max surge current: 5000A
#30-1660
Prostar 1000
VHF/UHF/FM Antennas
#PR-7052
#30-1645
•300ohm output •Digital ready •Die cut impedance
correlators allow close spacing of antenna elements
manufactured from high tensile aluminum that
will withstand strong wind and ice •Aluminum is
protected with high quality polymer finish to protect
for oxidation •Exlusive wrap-around mast clamps
can not crush antenna or boom mast •Completely
automatic hardware
Active
VHF
UHF
Boom
Order # Elements Elements Elements Length (ea.)
PR-7010
22
9
13
16.5" $71.95
PR-7015
31
12
19
87.75" 59.95
PR-7032
33
13
20
103.25" 81.69
PR-7042
43
17
26
149.75" 139.00
PR-7052
49
21
28
170.25" 169.00
Chromstar 2000
VHF/UHF/FM Antennas
#CA-7082
Active
VHF
UHF
Boom
Order # Elements Elements Elements Length (ea.)
CA-7082
50
18
32
110.5" $129.00
CA-7080
39
14
25
90"
109.00
Amplified, Satellite Dish
Mounted, Clip-On TV Antenna
Many areas have great local programming but
the satellite companies charge you for that local
programming on a per receiver basis. Now you can
keep the great satellite programming you have, pick
up local HD stations not currently available from
service providers and get free local programming too
with the TERK TV44. The TV44 is an easy to install
clip on amplified antenna, which installs directly
on your existing satellite dish. So pick up the local
stations you want without picking up the extra cost.
You’ll soon realize all the advantages of a new TERK
TV44 antenna. First, it can be installed easily by
anyone. The TV44 has a patented clip on design
that attaches directly to your satellite dish without
any tools. The TV44 was developed to be weather
resistant, ensuring years of enjoyment, and its
internal amplifier minimizes signal loss for
the best reception possible.
Order #
33-9655
Mfr. #
TV-44
(ea.)
$54.95
Order #
33-10400
Advantage Series Antennas
The Advantage line of antennas was designed
with the Do–It–Yourself installer in mind. All
models are UPS shippable and will fit in most any
car. Superior performance, economy, pricing, and
pre-assembled for ease of installation, make this
antenna line the perfect choice for the self-installer.
Includes balun, weather boot and S clip.
Order #
30-1635
30-1640
30-1645
30-1655
30-1660
30-1665
Mfr. #
3020
3019
3018
3016
3014
2001
Boom Length
152"
133"
113"
66"
52"
27"
(ea.)
$139.95
104.81
80.43
49.95
37.49
39.74
Channel Master ushers
in a new era for off-air
reception with the
introduction of the STEALTHtenna. Optimized
for HDTV/digital and analog reception, the
STEALTHtenna offers the performance and
aesthetics that today’s consumers demand
for their ever changing reception needs. The
STEALTHtenna is also the perfect compliment
to DBS satellite systems for reception of local
broadcast. Rear mounting bracket design allows the
STEALTHtenna to be easily installed under an eave
for an inconspicuous installation. STEALTHtenna
may also be mounted in traditional roof, chimney,
wall and attic configurations. Optional amplifier
provides split band amplification and is optimized
for HDTV/digital as well as analog signals.
Specifications: Gain: 15dB UHF, 15dB VHF/FM.
Power 12~22VDC via included adaptor.
Mfr. #
3010
3038
Double Galvanic
Lightning Arrester
Protects your valuable
video equipment from
voltage surges caused
by lightning strikes
to or near antennas
or cable television
lines. Frequency
range: 5MHz~1GHz.
Order #
33-8695
(1-9)
$5.19
(10-up)
$4.81
High Frequency
Ground Blocks
High frequency
ground blocks
have extended frequency capacity to 2.4GHz making
them perfect for satellite and digital applications.
Nickel plated finish to resist effects of the weather.
STEALTHtenna™
UHF/VHF Antenna
Order #
30-1715
30-1720
(1-9)
$5.99
Description
Stealthtenna
Stealthtenna amplifier
(ea.)
$69.95
49.95
Order #
33-7705
33-7710
Description
Single
Dual
(1-9)
$0.49
2.07
(10-99)
$2.03
(100-up)
$1.93
Grounding Block
•Zinc die-cast •Mounting
screws included.
Order #
33-470
33-1800
Type
Single
Dual
(ea.)
$0.82
2.69
Snap-N-Seal
Ground Blocks
The perfect way to make your
ground with less chance of
allowing moisture to get into the
connection. Incorporates the
Snap-N-Seal feature on the
ground block.
Order #
33-4175
33-4180
Cable type
RG-6
RG-6QS
(1-9)
$6.14
6.14
(10-49)
$5.63
5.63
(50-up)
$5.11
5.11
TennaMount
A strong stable
mounting system that
supports both DBS and
VHF/UHF antennas in
one convenient location.
Installs quickly and
easily to the side wall of
a building, and adjusts
easily to roof overhangs.
It can be wired with
back–to–back splitters so
all DBS, VHF and UHF
signals travel on one
RG-6 cable. All mounting
hardware supplied.
Order #
33-2630
(ea.)
$52.02
MiniMount
The low profile design
attaches easily to the top
of a roof mounted antenna
pipe stand, providing a
stable mounting point for
any small VHF/UHF
TV antenna.
Order #
33-2626
(ea.)
$18.13
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
283
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
14
•75ohm output •1dB to
2dB higher gain on VHF
and UHF for improved
picture quality •Zinc
plated steel hardware
•Polyethylene boot covers
keep connections clean
#CA-7080
and dry •Aluminum is
protected with a high–quality polymer finish
to protect from oxidation
#30-1665
C52_pg_284
8/13/07
11:15 AM
Page 284
SATV/CATV
D
A
“J” Pipe Mount
section
14
A
B
C
Designed for outdoor antenna use and can
be used on the roof or side of the house. The
mount foot can be used on either end of the
pipe for most efficient mounting. •Galvanized
steel • 38" long •Wall thickness: .060" •1.66"
OD and E–Coated for maximum protection.
Order #
DS-3000
(ea.)
$29.95
B
E
(2-up)
$25.70
C
F
Ground Clamps
A properly grounded antenna or satellite system
will not suffer from the effects of ground loops.
These ground loops can be identified as beat and
herringbone in the picture. Available in 3⁄8" and 5⁄8" for
connecting to ground rods and two piece clamps for
connecting to 1⁄2" to 1" water pipes.
Fig.
A
B
C
Order #
33-6895
33-6900
33-6905
Diameter
3
⁄8"
5
⁄8"
1
⁄2"~1"
(1-9)
$1.79
2.09
2.89
(10-up)
$1.25
1.64
2.46
DBS Pipe Adaptor
Order #
33-4935
Dimensions
⁄2" x 1 1⁄4"
⁄8" x 1"
3
Fig.
A
B
C
D
E
F
DSS
Rear-Mount
Quickly and securely connects
ground wires together. Connect
the ground for an antenna or
DSS to the house ground.
Available in two sizes.
1
•Heavy–duty mount for masts up to 11⁄2" outer
diameter •Made of all steel construction
•Triple coat corrosion protection
(ea.)
$16.29
Split Bolts
Order #
33-7020
33-7025
Heavy–Duty Antenna Mounting Accessories
Install a DSS, Dish Network or Prime
Star dish to any antenna mast or pipe
with this pipe adaptor. Works with
RCA, Panasonic, Echo Star and other
DSS dishes. Mfr. #QPA-1.
(1-9)
$4.39
1.89
(10-49)
$4.03
1.74
14
3
8
The 4' universal grounding rod is ideal for
completing your system installation. The copper
coated steal construction prevents ground
loop problems.
Order#
33-9700
(1-9)
$5.49
Description
Roof mount
4" wall mount
8" wall mount
“Z” chimney mount
“Y” chimney mount
Vent pipe mount
The DSS rear–mount attaches
quickly to the existing bolts
on the rear of the DSS dish
allowing for mounting of
a local broadcast antenna.
Order #
30-1520
(1-9)
$12.09
(10-up)
$10.39
Antenna
Mounting
Hardware
•Mounts TV antennas without
guy wires •Self supporting
•Extra heavy–duty with
rotamast feature •Fits mast up
to 13⁄4" •Six screw mast support
Order #
30-925
30-930
Size
3'
5'
(ea.)
$6.65
6.65
7.68
10.24
16.95
10.24
A
Tripod
Roof Mounts
4' x ⁄ " Universal Grounding Rod
Order #
30-895
30-900
30-905
30-910
30-915
30-1160
Fig. Order #
A 30-1030
B 30-1035
C 30-1045
B
C
Description
Qty. (pkg.)
Guy wire clamp up to 11⁄2" mast 1
$3.58
Turnbuckle - 7" open, 5" closed 3
4.09
Cable clamps 1⁄2" open 1⁄8" closed 3
1.53
(ea.)
$22.17
30.25
Masts
Dura-Tube® Antenna Mounts
Ground Wire
Type THHN wire commonly used as ground wire.
10AWG stranded or solid copper with oil and gas
resistant coating. Available in stranded and solid.
Order #
24-5365
24-5370
24-5375
16 gauge corrosion protected mast ideal for television
and communication antennas. 5' section swagged at
one end. 21⁄2' section ideal for use above rotator.
Description
Stranded, 500' spool
Solid, 500' spool
Solid, sold per foot
(ea.)
$129.94
129.94
1.11
(2-up)
$107.06
0.88
SlimLine
Coupler
This flat, flexible
coupler allows you to run cables into a house or
apartment without drilling holes in the house of
window frame. Simply put the cable through the
window and close, the coupler will bend easily
around the window pane.
Order #
33-7430
Channel Master DURA-TUBE
super alloy is the steel masting
with the double overcoat for
lasting beauty and protection.
Channel Master starts with the
finest quality high tensile steel
tubing and receives a powder
coat painted overcoat. The
end result is a super tough
weather protected mast that
is 50% stronger than high
carbon steel masting of
the same diameter.
Order #
30-1725
30-1755
Mfr. #
9003
1607
Description
3' tripod mount
5' mast, 16 GA
Order #
30-1080
30-935
(ea.)
$33.66
8.69
Order #
30-1055
(ea.)
$8.19
Antenna lances are a quick and easy way of
mounting small antennas to attic trusses or rafters.
1" diameter to accommodate standard antenna
mounting hardware.
Order #
30-1605
30-1610
Length
18"
24"
Alternative to roof and chimney mounts. Fits most
any medium pitch roof. Adjusts from 43" to 60".
Accepts up to 11⁄2" masts. Includes mounting
hardware. Zinc finish.
Order #
30-1085
(ea.)
$22.17
Use for attaching wires and cables
to structures and to support cable
runs and electrical wiring.
Bright galvanized steel.
11⁄4" eyelet and 11⁄4" nail.
Order #
33-8615
(1-9)
$1.79
TV Line Clips
NET 30
Terms
284
Order Online
www.mcmelectronics.com
(ea.)
$4.15
5.19
“D” Rings
Eve Mounts
•18 gauge, 6 strand heavy-duty guy wire •Vinyl
coated to reduce effects of weather •Length: 100'
(ea.)
$3.58
6.05
Antenna Lances
(ea.)
$8.29
Guy Wire
Size
21⁄2'
5'
•For antenna lead hook–ups •High–quality construction •For quick
connection of 300ohm twin lead to antenna terminals •Two per package
Order #
33-610
(1-9 pkgs.)
$1.24
(10-49 pkgs.)
$1.06
(50-99 pkgs.)
$0.85
(10-49)
$1.74
(50-up)
$1.53
C52_pg_285
8/13/07
11:14 AM
Page 285
SATV/CATV
section
14
COAX-SEAL
•A fast and easy way to
waterproof coax fittings
•Wraps around fittings and can
be molded to any shape •Works
with vinyl and poly vinyl outer
covers •Stays flexible for years
Order #
21-1140
(1-9)
$3.49
(10-24)
$3.16
(25-49)
$2.95
#30-2040
B
#30-2045
WiFi Antennas
Pitch Pad Kit
•Pitch pad and lag bolt
kit •Pads reduce risk of
water leakage •Use when
mounting antennas on roof
•Contains six lag bolts
Order #
30-940
(kit)
$3.06
Boost the performance of your wireless signal and
expand the WiFi coverage with these multi-band
(802.11a/b/g/n) wireless router antennas. The WF-O
and WF-D antennas can be mounted to a wall, or
placed on a desk, and feature dual-band functionality
(2.4GHz and 5.8GHz) and up to 8dB gain to increase
transmission rates and decrease retransmissions.
Includes TNC/SMA adaptor and 3' RG-316/UL cable.
The WF-R is a standard, 7dB gain wireless router
replacement antenna featuring a 2.4GHz operating
frequency, and a reverse polarity TNC connector
that is compatible with most detachable antennas.
Order #
30-2040
30-2045
30-2050
Cable feed-thru bushings give cable and satellite
installations a finishing touch. Available in single
and dual construction, white or black. 100 per
package.
Description
Single, white
Single, black
Dual, white
Dual, black
(1-9 pkgs.)
$4.09
4.09
5.11
5.11
(10-up pkgs.)
$3.69
3.69
4.74
4.60
Pin Length
7
⁄16"
5
⁄16"
Price per box
(1-9)
(10-up)
$19.95
$19.52
19.95
19.52
Make cable runs neat and easy. Made of
high impact plastic with plated steel
nails. Firmly attaches cable to wood,
plastic, brick, mortar or concrete block.
100 per package.
Color
Black
White
Black
White
Black
White
Order #
33-1570
(1-9)
$1.76
Choose from either unidirectional, or omnidirectional
oudoor wireless antennas that offer exceptionally
high gain over longer distances. The unidirectional
antennas (#30-2080 and 30-2081) feature a unique
reflector grid design that improves the front-to-back
ratio, effectively rejects interference and vastly
improves gain from very tight, directional beams.
The omni-directional antenna offers an ultra-high
gain from a 360°pattern, which is ideal for
campus and office park coverage.
Fig.
A
B
C
Order #
30-2080
30-2081
30-2082
Description
Unidirectional
Unidirectional
Omni-directional
Gain
18db
24db
12db
Beam
Width (ea.)
15° $99.95
10° 119.00
360° 119.00
(10-up)
$1.06
#30-2085
75ohm UHF and 75ohm VHF inputs
(1-9)
$1.76
(10-up)
$1.03
#30-2086
#30-2087
Push-On Balun
•Quick connect for “F” fittings with
impedance matching transformer
•Minimum five
Order #
33-010
(5-9)
$0.84
(10-up)
$0.63
#30-2088
Indoor
•UHF/VHF/FM
75~300ohm matching
transformer •“F” type input, 300ohm twin lead
output •Minimum five
(5-9)
$0.69
(10-99)
$0.59
(100-up)
$0.49
Economical Indoor
Matching Adaptor
Cable
(1-9 pkgs.) (10 pkgs.-up)
RG-59
$3.89
$3.19
RG-59
3.44
2.90
RG-6
3.39
2.85
RG-6
3.58
3.01
Dual RG-6
3.65
3.11
Dual RG-6
3.65
3.02
Outdoor Long-Distance 2.4GHz WiFi Antennas
300ohm UHF and 75ohm VHF inputs
Order #
33-050
Cable Clips
Order #
33-585
33-580
33-4745
33-4750
33-4765
33-4770
(ea.)
$19.95
19.95
16.95
A
14
Made from UV stabilized,
non–conductive polycarbonate, these clips
are both weather and impact resistant.
Smooth, rounded edges will not cut or
abrade the cable shielding as metal
clips can. The clip is designed with
strain relief grips to hold the clip, no
need to hold the clip while installing it.
Thin hardened pins won’t chip stucco
and mortar on your customer’s house. 100 per box.
Mfr. #
TA-7LP
TA-7
Gain
7dB
8dB
7dB
UHF/VHF signal combiners for use with antennas
when TV has only one antenna input. Small size,
11⁄4" wide by 13⁄4" high, for use with newer
TVs with recessed “F” connector.
Order #
33-1580
RG-6/U Tap-In Cable Clips
Order #
33-8635
33-8636
Mfr. #
WF-O
WF-D
WF-R
Mini UHF/VHF Signal Combiners
Feed-Thru Bushings
Order #
33-4815
33-4820
33-4825
33-4830
Description
Omni-directional
Directional
Replacement
C
#30-2050
•UHF/VHF/FM
75~300ohm adaptor
•“F” type input, twin
lead output •Ten per
bag, bulk packaged
Order # (1-3 bags) (4-9 bags) (10-24 bags) (25 bags-up)
33-1390 $7.50
$6.99
$6.50
$6.31
Indoor 2.4GHz WiFi Antennas
Connect a new signal boosting WiFi antenna to
your existing 2.4GHz wireless router to vastly
improve indoor signal coverage and mobility.
Choose from several antenna designs (wall, ceiling,
desk, or corner) that optimize gain in various locations
throughout a building, or residence by utilizing either
multi-directional, or omni-directional beams, and
unique, functional designs to maximize efficiency
and signal strength.
Order #
30-2085
30-2086
30-2087
30-2088
Description
Gain
Multi-directional, wall-mount 11db
Multi-directional, corner-mount 12db
Omni-directional, multi-mount 5db
Omni-directional, ceiling-mount 5db
Beam
Width
180°
90°
360°
360°
(ea.)
$79.95
79.95
79.95
79.95
Outdoor
•Weather resistant, molded plastic construction
•Supplied with rubber boot
U-Bolts
Connects antennas or
mast to bracket. Use
with mast pipe up to
11⁄4". One per package.
Order #
30-1515
(1-9 pkgs.)
$1.59
Order #
33-040
Antenna Signal Splitters
(10 pkgs.-up)
$1.12
Order #
33-220
33-200
Input
Ohms
75
75
VHF
Ohms
75
300
UHF
Ohms
300
300
FM
No
Yes
(1-9) (10-49)
$4.09 $3.57
3.29
2.57
(1-4)
$2.18
(5-9)
$2.04
(10-49)
$1.71
(50-up)
$1.39
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
285
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
C52_pg_286
8/13/07
11:01 AM
Page 286
SATV/CATV
section
14
•44" black,
retractable VHF
dipoles •Adjustable
UHF tuning loop
•4' coaxial cable
for easy hook-up
•Matching
transformer to connect to cable ready TV •Twin lead
connectors to attach to TV •Useful for all screen sizes,
particularly over 19"
VHF/UHF/FM/HD
Digital Indoor Antenna
•12 position fine tuning
for best reception •34"
telescoping dipoles for
VHF reception (channels
2~13) •UHF loop (channels
14~69) •6' coaxial cable
Order #
MANT210
UHF/VHF/FM Indoor/Outdoor Antenna
VHF/UHF/FM
Indoor Antenna
Order #
MANT250
(1-9)
$16.95
(1-4)
$11.95
Order #
MANT950
HDTV Off-Air
Amplified
Antenna
Enjoy premium
performance
with this indoor
UHF/VHF/FM
antenna.
Features:
•50dB gain,
adjustable with
LED signal level
monitor •A/B
switch, heavy
chrome plated
44" dipoles •Very low noise amplifier (less than 4dB)
to maintain carrier to noise ratio, critical for DTV
•Unique scientifically designed UHF panel array for
superior analog and DTV reception •Swivels and tilts
for best signal alignment •Contemporary low profile
design, styled to compliment today’s TVs
UHF Indoor/Outdoor Antenna
Easiest and best solution for
urban/surburban UHF DTV
(digital TV) reception. Perfect
alternative to conventional outdoor
antennas. Features: •Built-in
optimum gain amplifier, 18dB UHF,
with low noise circuitry, under 3.5dB,
for best possible DTV performance
•Efficient flat panel UHF array,
up to 40 miles range •Compact yet
effective size, 5" x 10" •Easily
mounts on wall, mast or railing •Can
be used with rotor (optional, mast
only) •Ideal for RV or boat. Includes
20' cable, power injector, power
supply, and flexible mounting kit.
(1-4)
$39.95
Order #
MANT510
(1-9)
$45.95
(1-4)
$85.95
Indoor DTV
UHF/VHF Antenna
Enjoy optimum indoor
reception of digital
TV. Features:
•10dB adjustable
gain amplifier,
extends range
•Trademark silver sensor
log periodic UHF design for
best possible indoor reception •Contemporary
low profile design, styled to compliment today’s
TVs •Hide away, heavily chrome plated 34" VHF
dipoles •Very low noise amplifier (less than 4dB)
to maintain carrier to noise ratio, critical for
DTV. Visit www.mcmelectronics.com for
complete specifications.
Order #
PHDTV3
(1-4)
$39.95
14
Order #
MANT940
This versatile antenna is designed to look as great
as it performs. Use it indoors or out for superior
reception in urban or suburban areas. Lightweight,
compact and easily mountable, it’s equally at home
on your roof or patio rail, in your attic or family
room. Features: •Dual element for best reception
and range, up to 40 miles •Superior reception over
UHF and VHF bands •Ideal for both today’s
analog reception and the future’s digital TV (DTV)
•18dB/VHF, 15dB/UHF amplifier gain for extended
reception range •Low noise amplifier maintains
carrier-to-noise ratio, critical for DTV •Can be
used with rotor (optional, mast only). Includes
hardware, power supply and 20' cable.
Visit www.mcmelectronics.com for
complete specifications.
TV55 HDTV Antenna
The TV55 includes cables and
weatherproof stainless steel
connectors, for easy
integration with
HDTV Outdoor Antenna
Front
Back
Digital TV/HDTV ATSC Off-Air Tuner
Ideal solution for receiving terrestrial, off-air
(antenna) digital TV broadcasts from the constantly
increasing number of off-air digital TV broadcasters
(e.g., local stations, PBS, etc). Features: •ATSC
receiver capable of outputting composite, or
component (Y.Pb.Pr) video •Stereo audio output
•Parental control-movie/TV rating (V-chip) •Fully
functional infrared remote controller •Selectable
SDTV/ HDTV output/input resolution (480i/480p/
720p/1080i) •Standard definition NTSC 480i output
•Aspect ratio control; 4:3 and 16:9 •Advanced
Electronic Program Guide (EPG)
Order #
33-10413
(ea.)
$189.95
NET 30
Terms
286
Order Online
www.mcmelectronics.com
The Lacrosse HDTV antenna
is the perfect blend of style and
performance. Based on remote
sensing technology, the Lacrosse
is the first HDTV antenna to
employ the newest reception
capabilities in both amplified and
non-amplified versions. It is one
of the strongest multi-directional
antennas available, and performs
consistently across the entire
UHF spectrum (channels 14~69).
Specifications: •Range: Up to 40 miles
•Gain: 10.8db (non-amplified); 17db
(amplified) •Dimensions:
14" (H) x 20" (W)
Order #
30-2060
30-2061
Description
Non-amplified
Amplified
(ea.)
$109.00
119.00
satellite systems.
The kit combines
local and satellite signals
into a single RG-6 coaxial
cable, eliminating the need to run
an extra wire from the dish to the home.
Accessories included: (1) power injector with
110VAC to DC power adaptor, (1) 1⁄4-20 x 11⁄2" hex-head
bolt, (1) 1⁄4-20 21⁄2" hex-head bolt, (1) mast mount base,
(2) 1⁄4-20 x 3⁄4" hex-head bolts, (1) mast mount cover, (1)
1
⁄4-20 wing nut, (2) window mount brackets (2-piece
assemblies), 1⁄4"-20 hexagon nuts, (2) wall mount
cam-lock units, (2) #10 x 21⁄2" flat-head screws, (1)
channel insert, (2) #8 x 11⁄2" flat-head screws, (1)
93⁄4" flat coaxial cable, (2) 1⁄4" split washers, (1) 36"
RG-6 coaxial cable, (2) #10 plastic wall anchors.
Mfr. #TV-55.
Order #
30-1525
(ea.)
$67.95
HDTV Picture
Frame Antenna
This attractive
cherry wood
picture frame
with glass
photo cover has
a powerful, built-in antenna element for those
wanting a discreet, but powerful indoor antenna.
Specifications: •Range: Up to 15 miles •Gain: 6.5db
(non-amplified) •Targeted band: UHF (channels
14~69) •Dimensions: 9" (L) x 11" (H) x 1" (D)
•Holds an 8" x 10" photo
Order #
30-2055
(ea.)
$39.95
HDTV Indoor Antennas
Terk indoor HDTV directional
antennas are optimized for HDTV reception.
Both UHF and VHF elements are uniquely
designed for reception of all available
HDTV off-air broadcasts (channel 2~69).
Highly directional UHF elements reduce signal
interference and improve average return loss for
better reception and superior performance.
Order #
30-2000
30-2005
Mfr. #
HDTVi
HDTVa
Description
Non-amplified
Amplified
(ea.)
$37.95
49.95
C52_pg_287
8/13/07
11:13 AM
Page 287
SATV/CATV
HDTV Outdoor
Antenna
The Terk HDTVs is a slim
profile, compact, lightweight, HDTV
antenna offering excellent reception
of reflected broadcast signals
in urban areas. It is designed
specifically to receive both UHF
and VHF HD signals (channels 2~69) that
reflect off line-of-sight obstacles, and its
pipe and foot mount enables this antenna
to be installed on a roof, wall, balcony
or attic.
Order #
30-2015
(ea.)
$139.00
HDTV Amplified
Outdoor Antenna
The Terk
HDTVo is an
innovative, compact,
amplified outdoor
antenna that
features powerful high
gain, and offers versatile
installation flexibility. Its
unique design incorporates
a highly directional log periodic antenna array and
a pair of curved elements that combine to capture
and focus HDTV signals. Mount flush to the side of a
building, or use the included mulit-mount mini-mast
and base to install virtually anywhere.
Order #
30-2020
(ea.)
$109.00
XMIRCO2
Satellite Radio
Replacement Antenna
Order #
33-10365
33-10371
Description
XMICRO2 antenna
50' amplified extension cable
(ea.)
$29.95
39.95
Sirus™
Satellite Radio
Replacement Antenna
Practically invisible,
the SIRMINI antenna
has a powerful magnetic
base with rubberized feet to
facilitate versatile mounting and placement without
drilling into the vehicle surface. For use with singleinput Sirus™ satellite radio receivers. Features a low
profile, high performance design and extra long 21'
cable. Dimensions: 1.37" (W) x .5" (H) x 1.25" (D)
Mfr. #SIRMINI.
Order #
33-10385
33-10371
Description
SIRMINI antenna
50' amplified extension cable
(ea.)
$39.95
39.95
AM Loop Antenna
•Popular replacement
AM antenna used on
most stereo receivers
•181⁄2" lead length
•300ohm impedance •Antenna has two pin quick
connect for equipped systems •For systems with push
terminals or screw terminals, simply cut and strip the
ends of the antenna wire for your application
Order #
30-660
(1-9)
$3.35
(10-up)
$3.13
section
14
Control your new
XM satellite service
through your car’s XM-ready stereo with XMDirect™
products. The XMDirect™ universal tuner box
receives the digital XM satellite radio signal through
the XM-ready car stereo head unit. •Compatible with
all XMDirect™ products •Small size for a clutter-free
installation •Tuner dimensions: 33⁄4" (W) x 11⁄4" (H) x
43⁄8" (D). Note: Must be used with XMDirect™ smart
digital adaptor or digital adaptor cable.
Order #
Description
Tuner
33-10315 Universal tuner box
Smart digital adaptor
33-10320 Sony™
33-10325 Kenwood™
33-10330 Pioneer™
33-10335 Alpine™
Digital adaptor cable
33-10340 Panasonic (2006 radios)
33-10345 Panasonic (2005 radios)
Mfr. #
XMD1000
$39.95
XMDSON110
XMDKEN100
XMDPIO110
XMDALP100
39.95
39.95
39.95
39.95
XMDPAN110
XMDPAN100
24.95
24.95
XMDirect™ Factory
Radio Kits
Control your
new XM satellite
service through
#33-10350
your cars
XM-ready stereo with XMDirect™ products. The
XMDirect™ Universal Tuner Box receives the digital
XM satellite radio signal through the XM-ready car
stereo head unit. •Compatible with all XMDirect™
products •Small size for a clutter-free installation
•Tuner dimensions: 3 3⁄4" W x 1 1⁄4" H x 4 3⁄8" D. Note:
Must be used with XMDirect™ smart digital adaptor
or digital adaptor cable.
Order #
33-10350
33-10355
33-10360
33-10361
Mfr. #
XMDGMK
XMDFDK
XMDCPK
XMDTLK
#33-10375
(ea.)
#33-10380
XM Passport
Mini Tuner
This miniature cartridge is a complete XM radio
tuner for XM ready home audio devices, allowing
users to have just one XM subscription. The XM
Passport mini-tuner works with a wide array of
existing XM ready products (with a built-in tuner
slot), including home stereo and home theater
systems, DVD players, mini/micro shelf systems,
clock radios, and portable devices. It can be used with
a docking station, or inserted directly into compatible
mini-tuner-slot audio devices. The home dock
(CNP2000H) includes a docking station, protective
cover, window sill-mount antenna, and 20' antenna
extension cable.
Order #
33-10375
33-10380
Mfr. #
CNP2000
CNP2000H
Descrption
Cartridge
Home dock
(ea.)
$29.95
29.95
Description
(ea.)
GM XMDirect™ OEM kit
$159.00
Ford XMDirect™ OEM kit
129.00
Chrysler XMDirect™ OEM kit 129.00
Toyota XMDirect™ OEM kit
159.00
14
Practically invisible, this
mini antenna has a powerful
magnetic base with
rubberized feet to facilitate
versatile mounting and
placement without drilling
into the vehicle surface.
For use with single-input
XM Satellite Radio® receivers. Features a low profile,
high performance design and extra long 23' cable.
Dimensions: 1.37" (W) x .5" (H) x 1.25" (D).
XMDirect™
Universal
Tuner Box
and Adaptors
Truck Mirror Mount
Antenna Bracket
for XM/Sirius
Compatible with
Sirius and XM
magnetic mount
antennas, this chrome
plated, weatherproof antenna mount bracket has
tool-less wingnuts for quick installation. •Fits 1⁄2", 3⁄4"
diameter side mirror supports •Includes three cable
protectors and an adhesive pad for semi-permanent
antenna installation. Mfr. #SRB-M.
Order #
33-10370
(ea.)
$18.95
Sirius™
Satellite Radio Outdoor Antenna
Maximize the signal strength of your
SIRIUS™ dedicated home, or plug-and-play single
input receiver/ radio. This all-weather antenna can be
mounted on an exterior wall or roof with the supplied
universal mounting bracket and hardware. The SIR6
comes with a 30' detachable cable to facilitate easy
cable routing and hook-up. Dimensions: 33⁄16" (W) x
43⁄4" (H) x 125⁄16" (D). Mfr. #SIR6.
Order #
(ea.)
33-10390
$79.95
FM Dipole Antennas
These high quality FM
dipole antennas can be
used for many newer
FM tuners and receivers.
Available in three
configurations: 300ohm
spade terminals, 75ohm
male “F” connector and 75ohm female PAL connector.
These antennas are constructed from high quality
300ohm twin–lead and perform significantly better
than the OEM supplied straight wire or a split
two conductor antennas providing higher quality
FM reception.
Order #
30-1530
30-1535
30-110
Description
Male “F” connector
Female PAL connector
Spade terminals
(1-9)
$2.09
1.52
1.49
(10-up)
$1.39
1.01
1.35
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
287
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
C52_pg_288
8/13/07
11:07 AM
Page 288
SATV/CATV
section
14
High-Power Amplified
Indoor TV Antenna
•Amplifies up to
45dB with signal pass to
avoid signal saturation;
3-stage amplifier
•39" retractable dipoles
adjust for best reception
•UHF loop tilts 180° and
rotates 360° •Integrated
3-way switch for
switching between
antenna and cable or
satellite •Integrated hook-up cable; low noise
insertion loss •No assembly required •Isolated
dual UHF and VHF gain controls •Noise filtration
Order #
ANT1250
(ea.)
$48.50
Indoor Antenna
•Digital TV compatible
•VHF/UHF/FM •39"
retractable dipoles adjust
for best reception •UHF
loop •6' 75ohm hook–up
cable with screw–on
“F” connector
Order #
ANT1020
(ea.)
$9.42
Order #
30-1560
(ea.)
$39.95
(2-4)
$39.09
(5-up)
$36.00
TV4
The TV4 low-profile
antenna is a perfect
set-top antenna for use
in urban or suburban areas. TV4 combines a
high-performance antenna with a low-profile design
that fits on top of any television, and even fits inside
most TV cabinets. TV4 features TERK’s unique
Complementary Symmetry technology, incorporating
a pair of tuned receiving elements for excellent
reception range and clarity. TV4’s revolutionary
design allows the antenna to stand less than 43⁄4
inches high while delivering outstanding reception.
Unlike the frustrating trial and error method of
adjusting conventional antennas, a simple rotation
obtains optimum reception. TERK’s indoor television
antennas are engineered with premium materials
resulting in a durable, high-performance antenna
that will look great on any TV for years to come.
Order #
30-1565
14
AM/FM Q
TV5
The TV5 antenna is a
perfect primary set-top
antenna in suburban or outlying areas. TV5 combines
a high-performance amplified antenna with a
low-profile design that fits on top of any television,
and even fits inside most television cabinets. TV5
features TERK’s unique Complementary Symmetry
technology, incorporating a pair of tuned receiving
elements for excellent reception range and clarity.
TV5’s low-noise broadband amplifier features a
simple one-touch adjust for all stations, and TERK’s
patented selectable amplifier bypass prevents
over-modulation of stronger incoming signals. The
integrated video selector switches between the
antenna and any video component such as a DVD,
VCR or video game at the touch of a button, without
having to change any connections. TERK’s indoor
television antennas are engineered with premium
materials resulting in a durable, high-performance
antenna that will look great on any TV for years
to come. Mfr. #TV-5.
(ea.)
$18.95
(2-4)
$18.37
(5-up)
$17.09
Indoor Antenna
•Adjustable/retractable VHF
dipoles extend up to 39" to
improve reception of channels
2~13 •UHF loop for improved
reception of channels 14~69
•HDTV compatible •Attached
3' 75ohm coaxial hook-up cable
with “F” connector for easy
hook-up •Off-air reception
of local channels-analog or
digital •No-scuff pads protect
cabinet/TV top •Dimensions:
12.7" (L) x 7.1" (W) x 3.0" (H)
Order #
ANT110
Order #
30-1205
AM Advantage
The AM Advantage
antenna is a passive, fully
adjustable indoor AM
antenna designed for
extended range capability.
The antenna is intended
to receive AM frequencies
530KHz~1600KHz for
local and distant AM reception. The antenna
features Pin–Dot™ Pre Tuning system which allow
the user to adjust the antenna and match it to the
specific frequency. Mfr. #ADVANTAGE.
Order #
30-1395
(ea.)
$39.95
NET 30
Terms
288
Order Online
www.mcmelectronics.com
(ea.)
$59.95
(2-4)
$57.95
(5-up)
$54.95
TV3
The TV3 antenna is a perfect
primary or secondary set-top
antenna in suburban or
outlying areas. TV3 offers
the performance of a high
quality amplified rabbit ear
antenna with the convenience
of an integrated video switch,
creating a one-cable solution
for a video game, DVD player, VCR or other video
component. A 75ohm coaxial cable and 75~300ohm
matching transformer are included to ensure
compatibility with any television set, and a non-skid
silicon base adds maximum stability. The TV3’s
low-noise broadband amplifier boosts weaker signals
for maximum reception range and clarity. The
amplifier features one-touch adjustment for all
stations, and TERK’s patented selectable amplifier
bypass prevents over-modulation of stronger incoming
signals. TERK’s indoor television antennas are
engineered with premium materials resulting in a
durable, high-performance antenna that will look
great on any TV for years to come. Mfr. #TV-3.
Order #
30-1570
(ea.)
$32.89
(2-4)
$31.59
(5-up)
$28.19
•Dipoles extend to 30"
•Dual UHF loops •Brass
with polished chrome
finish •Black base with
33" lead length
Order #
30-655
(1-9)
$5.07
(10-up)
$4.17
(ea.)
$95.95
AM/FM TOWER
This newly designed antenna solves
reception problems in urban high–rise
or suburban environments. Positioned
vertically, the tower receives signals
from all directions with equal strength.
Used horizontally, it becomes highly
directional to pull in weaker and more
distant stations. It also distinguishes
between signal reflections and the main
signal to eliminate overload and
multipath difficulties. Specifications:
FM stereo section: •Amplifier gain:
Variable 0dB~25dB •Impedance: 75ohm
adaptable to 300ohm input with included
matching transformer •FM operating
band: 88~108MHz AM stereo section:
•AM operating band: 500~1700KHz
•AM gain: 15dB •Range: 360° 17" (H) x 31⁄4" (W)
Order #
30-1110
Order #
30-1550
UHF/VHF TV Antenna
FM PRO 50
FM PRO is the clear choice for the FM enthusiast.
Designed to provide exceptional long-range FM
reception, it may be mounted indoors or outdoors for
a totally unobstructed installation. #30-1205 has a
weather-proof housing and is easily installed in an
attic, exterior side of the home or indoors in a closet,
garage or interior wall. New Advanced Capture
Circuitry™ (ACC) ensures that strong signals are
locked in and weaker broadcasts are received with
less noise. Terk’s exclusive Dual Drive Amplifier
boosts signals above noise and interference, using a
DC–driven phantom power supply that is easily
connected to your receiver.
(ea.)
$5.19
The AM/FM Q is TERK’s
premium amplified indoor
AM/FM antenna. The
AM/FM Q features a
host of advanced
technologies for
exceptional antenna
performance, such as
TERK’s unique
Pin-Dot Pre-Tuning
that zeroes in on even
hard-to-get stations by tuning the antenna to the
station’s frequency. The AM/FM Q is easy to install
and use and its compact, stylish high-tech design
complements any home entertainment installation.
Mfr. #AF-1.
(1-9)
$19.95
(10-up)
$17.95
Panasonic Type Dual Antenna
•Replacement antenna for Panasonic, RCA, JC
Penney, Quasar and various private brand TV sets
•Five section •91⁄2" collapsed •39" extended •21"
lead length
Order #
30-060
(1-9)
$6.12
(10-up)
$5.91
Original JVC Rod Antenna
Order #
Mfr. #
Extended Base Diameter
Extended Sections Length Length Length (ea.)
5
32-6970
6
321⁄2"
73⁄4"
⁄16" $12.03
VJA3006-00E
5
32-6970
6
321⁄2"
73⁄4"
⁄16"
12.03
VJA3006-00D
C52_pg_289
8/13/07
11:17 AM
Page 289
SATV/CATV
Keystone Mount
Category 5 Baluns
Replacement Antenna Dimensions Key:
•A The collapsed length of the aerial including
foot and tip
•B The length of the extended aerial including
foot and tip
•Ø The diameter
Replacement Antenna
•Used in: Audio-sonic, Continental, Crown, Fisher,
Hitachi, ISP, ITT, JVC, National Panasonic, Orion,
Palladium, Philips, Sanwa, Sanyo, Sharp, Sony,
Technics, Telefunken, Universum •Dimensions:
A = 204mm; B = 975mm; Ø = 6.0mm
Order #
APTA2
(1-4)
$4.64
(5-up)
$4.41
Replacement Antenna
•Used in: AIWA, Crown, Elite, Goldstar, Hitachi,
ITS, ITT, JVC, Loewe Opta, National Panasonic,
NEC, Nordmende, Orion, Palladium, Philips, Saba,
Sankyo, Sanwa, Sanyo, Sharp, Schmid, Siemens,
Sony, TEC, Telefunken, Teleton, Tensai, Toshiba,
Waltham •Dimensions: A = 230mm; B = 953mm;
Ø = 6.0mm
Order #
APTA3
(1-4)
$3.83
(5-up)
$3.76
•Used in: Aiwa, Continental, Crown, Fisher, Hitachi,
ISP, ITS, ITT, JVC, Loewe Opta, National Panasonic,
NEC, Nordmende, Orion, Palladium, Philips, Poppy,
Saba, Sanwa, Sanyo, Sharp, Shebro, Siemens,
Sony, Teleton, Tensai, Toshiba, Unisef, Universum,
Weltfunk •Dimensions: A = 273mm; B = 954mm;
Ø = 6.0mm
Order #
APTA5
(1-4)
$4.64
(5-up)
$4.54
Sanyo, Sony, Toshiba Type Antennas
•Dimensions: A = 306mm; B = 1076mm; Ø = 6.0mm
Order #
APTA16
(1-4)
$5.14
(5-up)
$5.05
Replacement Swivel Rod Antenna
Popular style antenna is commonly used on portable
radios, televisions and similar items. 1⁄4" diameter
rod is 9.3" in length when collapsed, and extends
to 31". Swivel base has a 3mm threaded hole
for mounting.
Order #
30-392
(1–3)
$3.49
(4–9)
$2.99
(10–up)
$2.49
Original Sony Antenna
Sony #1-501-386-11 and #1-501-388-11. Used in
models #CFS-D550, CFS-D305, CFS-DW34,
CFS-D30 and others. Two sections. Extended 24",
collapsed 13" and base diameter 3⁄8".
Order #
30-1180
(ea.)
$10.98
14
Keystone Mount Component Video Baluns
Keystone Mount
Composite
Video Balun
Intended to send
composite video
signal over Cat 5
cable, this balun
features an RCA female connector with yellow
insert, for easy identification as the video path. Rear
mounted IDC connector allows simple, fast connection
to unterminated Cat 5 cable. Sold individually.
Order #
50-7715
(1-3)
$18.95
Intended to send Y/Pb/Pr component video signals
over Cat 5 cable, these baluns are sold as individual
red, blue and green units. Internally identical units
feature RCA female connectors with the appropriate
color code insert, for easy identification of each video
signal path. Rear mounted IDC connector allows
simple, fast connection to unterminated Cat 5
cable. Sold individually.
Order #
50-7765
50-7766
50-7767
Color
Red
Blue
Green
(1-3)
$21.95
21.95
21.95
(4-up)
$18.69
18.69
18.69
(4-up)
$16.25
Keystone
Mount
Composite
Video Balun
Intended to
send composite video signal over Cat 5 cable, this
balun features a BNC female connector and is ideal
for use in video surveillance applications. Rear
mounted IDC connector allows simple, fast connection
to unterminated Cat 5 cable. •Sold individually
Order #
50-7716
(1-3)
$18.95
(4-up)
$16.25
Keystone Mount
Digital Audio
Balun
(1-3)
$18.95
(4-up)
$16.25
Keystone Mount
DC Power
Connection
This keystone
insert features
a standard
barrel jack
which accepts
connection from most AC adaptors. It is essential
when low voltage must be inserted into a Cat 5 pair
for remote distribution. It is ideal for remote powering
of small LCD monitors, video cameras, IR repeater
systems and similar items. Rear mounted IDC
connector allows simple, fast connection to
unterminated 22~24AWG solid or stranded wire.
Maximum voltage: 24VAC/DC, 1A. Barrel size:
2.1mm I.D., 5.5mm O.D. •Sold individually
Order #
50-7752
Intended to send line level audio signals over Cat 5
cable, these baluns are sold as individual red and
white units. Internally identical units feature RCA
female connectors with the appropriate color code
insert, for easy identification of left or right audio
channel. Rear mounted IDC connector allows
simple, fast connection to unterminated Cat 5
cable. Sold individually.
Order #
50-7760
50-7761
Intended to
send digital audio
(SPDIF) signal
over Cat 5 cable, this balun features an RCA female
connector with orange insert, for easy identification
as the digital audio path. Rear mounted IDC
connector allows simple, fast connection to
unterminated Cat 5 cable. Sold individually.
Order #
50-7755
Keystone Audio Baluns
(1-3)
$6.99
(4-up)
$5.95
Color
Red
White
(1-3)
$18.95
18.95
(4-up)
$16.25
16.25
Keystone Mount
3.5mm Connector
This keystone
insert features a
standard 3.5mm
three-conductor
female jack which
may be used in two
or three conductor applications. It is ideal any
time a 3.5mm connector is needed at a wall plate.
Rear mounted IDC connector allows simple, fast
connection to unterminated Cat 5 cable, or any
22~24AWG solid or stranded, UTP or shielded wire.
Maximum voltage: 24VAC/DC, 1A. Applications:
•Remote location of headphone jacks •Remote
microphone connections •Remote input from PC
sound card, MP3 player or iPod™ •IR repeater
connection •Remote triggering of A/V components
•Low voltage DC connection •Sold individually
Order #
50-7753
(1-3)
$6.99
(4-up)
$5.95
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
289
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
14
Replacement Antenna
section
Compact individual
baluns combine
the advantages
of Cat 5 cable for
interconnecting A/V
components over long
distances, with the
flexibility of Keystone
wall plates. The rear of the balun features a specially
designed tool-less IDC connector for easy connection
of unterminated Cat 5 Cable. The front is a RCA female
connector. Configure Keystone wall plates with exactly
the connections that are needed for each independent
application. Baluns are effective at distances of 400' and
may be intermixed with other MCM Custom Audio Baluns.
Sold individually, all baluns must be used in pairs.
C52_pg_290
8/13/07
11:16 AM
Page 290
SATV/CATV
Stereo A/V Balun
section
14
VideoEase™
HDTV Component
Video/Digital
Audio Balun
VideoEase™ VGA Balun II Over UTP
The component
video/audio balun
allows one component video (YPbPr
or RGB) signal and one audio signal
to be transmitted via cost-effective unshielded
twisted pair (UTP) cable in a point-to-point
configuration. Used in pairs, the component digital
balun supports 480i/p, 720p and 1080i/p video
formats for hi-definition (HDTV) video applications.
Features: •Supports 480i/p up to 1000' (305m) and
720p/1080i/p up to 500' (152m) via Cat 5 UTP,
respectively •Available with color-coded RCA cable
connectors •Supports either digital audio (5000050,
or 500051), or analog audio (500052, or 500053) on
fourth twisted pair •Modular shielded RJ-45
connector •Used in pairs, sold separately
Order #
33-10060
33-10061
33-10062
33-10063
Mfr. #
500050
500051
500052
500053
Connectors
Male RCA
Female RCA
Male RCA
Female RCA
Audio
Digital
Digital
Analog
Analog
Supporting distances up to 350', the VideoEase™ VGA
Balun II is a passive device that fully supports VGA
and SVGA (RGBHV) transmission via one Cat 5 UTP
cable without the need for shielded twisted pair (STP)
cable. This breakthrough technology allows VGA
equipment to be deployed more easily in both new and
pre-wire structured cabling environments. Used in
pairs, sold individually.
Order #
33-9601
33-9602
33-9603
Description
PC side (HD15-male)
Monitor side (HD15-female)
Monitor side (HD15-male)
Mfr. #
500040
500041
500042
(ea.)
$99.95
99.95
99.95
Videoease Active VGA Balun Kit
14
The VideoEase RGB
Balun allows a single
red/green/blue component
video signal to be transmitted
via unshielded twisted pair
(UTP) cable in a point–to–point
connection. The RGB balun eliminates three coaxial
cables, allowing RGB audio/video equipment to be
connected via space–efficient and cost–effective Cat 5
twisted pair cable. The RGB balun works with RGB
equipment that carries the synchronisation pulses on
one of the three color signals (ie; sync on green). The
RGB balun works with LCD projectors, monitors,
plasma screens, matrix switchers, splitters, convertors
and RGB video equipment and comes with three
separate coaxial jumpers for ease of installation.
Features: Up to 2200' (670m) in color via Cat 5 UTP.
Pair required for use, sold individually.
Order #
33-9595
(ea.)
$109.00
VideoEase™
Component
Video Balun
The VideoEase™
Component Video
Balun allows a single component video signal (Y, Pb,
or Pr) to be transmitted via cost-effective unshielded
twisted pair (UTP) cable. Three balun pairs are
required for one complete component (YPbPr)
video connection. The product allows three coaxial
cables to be replaced by one Cat 5 twisted pair cable,
allowing standard structured cabling techniques to
be used for neater and more streamlined cabling. The
component video balun is compact enough to allow
three units to be connected side by side on the back
of the component video equipment. Features and
benefits: •Supports one component of the YPbPr
video signal •Three balun pairs required per YPbPr
connection •Up to 1,000' (305m) via Cat 5 UTP
•Gold-plated connector •Cable strain relief •Compact
design •Lifetime warranty •Design patent pending
Order #
33-9755
Mfr. #
500021
(ea.)
$34.95
NET 30
Terms
290
Order Online
www.mcmelectronics.com
Order #
33-9625
Mfr. #
500001
(ea.)
$82.95
Videoease PS/2
Convertor Balun
(ea.)
$99.00
99.00
99.00
99.00
RGB Baluns
The VideoEase Stereo
Audio/Video Balun
allows a single
composite video signal
and a maximum of two
unbalanced audio signals to
be transmitted via unshielded
twisted pair (UTP) cable in a
point–to–point connection. The Stereo Audio/Video
Balun eliminates up to three coaxial cables,
allowing audio/video equipment to be connected via
space–efficient and cost–effective Cat 5 twisted pair
cable. The Stereo Audio/Video Balun also works in
conjunction with MuxLab’s Audio/Video Distribution
Hub (500200) allowing audio/video programming to
be distributed via UTP. Features: Up to 2200' (670m)
in color via Cat 5 UTP. Pair required for use,
sold individually.
•Extends the distance between the computer system
unit and a remote display monitor by up to 480' •It
accomplishes this by means of a local transmitting
unit, and remote receiving unit, connected by
standard Cat 5 twisted pair ethernet cable
Features: •Uses Cat 5 ethernet cable: For economy;
easy installation; and utmost data transfer reliability
•High resolution video: Up to 1800 x 1440 at 100
meters •Supports VGA and SVGA monitors •Long
distance transmission, up to 160m (480') •Local unit
includes port for local monitor
Order #
33-10120
Mfr. #
500035
(kit)
$349.00
VideoEase™
Composite
Video/Stereo Balun
The VideoEase™
stereo/video balun allows a single composite video
signal and stereo audio signal to be transmitted via
UTP cable up to 2,200' in a point-to-point connection.
Features: •Full audio bandwidth response for high
fidelity applications •20Hz~20KHz audio bandwidth
•Built-in color-coded cable leads for ease of
installation. Used in pairs, sold individually.
Order #
33-9626
Mfr. #
500039
Order #
33-10100
33-10105
Description
PS/2 PC side
PS/2 remote PS/2 side
Mfr. #
500046
500045
(ea.)
$35.00
35.00
Dual Audio/
Video Balun
The VideoEase Dual
Audio/Video Balun
allows up to two
composite video signals
and up to two unbalanced
audio signals to be
transmitted via unshielded twisted pair (UTP)
cable in a point-to-point connection. The Dual
Audio/Video Balun eliminates up to four coaxial
cables, allowing audio/video equipment to be
connected via space-efficient and cost-effective Cat 5
twisted pair cable. The Dual Audio/Video Balun also
works in conjunction with MuxLab’s Audio/Video
Distribution Hub (500200) allowing audio/video
programming to be distributed via UTP to up to eight
locations. Features: Up to 2200' (670m) in color via
Cat 5 UTP. Pair required for use, sold individually.
Order #
33-9610
Mfr. #
500012
(ea.)
$82.95
(ea.)
$69.00
Videoease™
Quad Audio Balun
Videoease Quad Video Balun
The quad audio balun
allows up to four analog
line audio signals to be
transmitted via unshielded
twisted pair cable in a point-to-point connection. One
pair of quad audio baluns can replace four coax audio
cables with one Cat 5 cable. Features: •Unbalanced,
line-level analog audio up to 5,000' via Cat 5 cable
•Less than 1dB per pair over frequency range.
Used in pairs, sold individually.
Order #
33-10115
•Allows PS/2 devices
to be located up to 350'
away from the PC •Using
inexpensive 4-pair Cat 5
shielded twisted pair or
unshielded twisted pair
cable depending on the equipment
used •Used in pairs, both the
#33-10100 and 33-10105 baluns eliminate the need
for a local keyboard and mouse •Typical applications
include corporate projection systems, classroom video
instruction and video information systems
Mfr. #
500033
(ea.)
$82.50
•Developed for the security video and audio-video
markets, the quad video balun allows up to four
composite video channels to be transmitted over one
Cat 5 cable, thus replacing up to four coaxial cables
for more cost-efficient cabling •Supporting composite
video up to 2,200' (670m) via Cat 5 cable and works
in pairs •Streamlining cabling in applications such
as security video, video-conferencing, classroom
instruction, tradeshow demos, PC-training, airline
information systems and home entertainment
systems •Used in pairs, sold individually
Order #
33-10110
Description
Quad VGA balun
Mfr. #
500032
(ea.)
$82.50
C52_pg_291
8/13/07
11:10 AM
Page 291
SATV/CATV
section
14
VideoEase™
Audio Balun
VideoEase™
MonoPro™ XLR
The VideoEase™
Audio Balun
allows any
unbalanced analog audio signal to be transmitted via
a single unshielded twisted pair (UTP) cable for more
versatile cabling. Used in pairs, the audio balun
eliminates costly and bulky coax cable, allowing
consumer and commercial audio equipment to be
connected using standard premises wiring techniques.
One or two pair of baluns are required depending on
whether the application is for monaural or stereo
audio. The audio balun features screw terminals
and built-in cable strain relief for ease of installation
and reliable connectivity. Applications include
auditoriums, arenas, schools, home theater systems,
airports, hotels, hospitals, conference rooms.
Features and benefits: •Eliminates coax cable
•Up to 5,000' (1.5km) via Cat 5 UTP •20~20KHz
bandwidth •Gold-plated RCA connector •Cable
strain relief •Compact design •Lifetime warranty
•Design patent pending
The MonoPro™
XLR connectors
allow a standard
AES analog or
#33-10055
digital audio
channel to be
connected via Cat 5 unshielded twisted pair cable
(UTP) in the professional audio environment. The
product features rugged cable strain relief and comes
with locking XLR3 connectors for added cabling
versatility. Features: •Rugged cable strain relief
•Line analog audio up to 5,000' (1.5km) via Cat 5
•Digital audio up to 1,400' (426m) via Cat 5
•Wires terminate inside product •Locking XLR3
connector •Optional wire terminal for ground/shield
(if required) •Up to 5,000' and 1,400' via Cat 5 for
analog or digital audio, respectively.
Order #
33-9745
Mfr. #
500019
Order #
33-10050
33-10055
Mfr. #
500025
500026
Description
MonoPro™ XLR male
MonoPro™ XLR female
16 Port Passive CCTV Hub
(ea.)
$250.00
S-Video Baluns
#33-9590
The VideoEase S-Video Balun allows a single S-video
signal to be transmitted via unshielded twisted pair
(UTP) cable up to 1000' (305m) in a point-to-point
connection. The product is available in two models;
the S-Video Balun (500016) and the S-Video/Audio
Balun (500017). Used in pairs, the S-Video Balun
eliminates costly and bulky S-video cable, allowing
S-video equipment to be connected or moved to any
convenient modular outlet. The S-Video Balun also
works in conjunction with MuxLab’s Audio-Video
Distribution Hub (500200) to allow S-video
programming to be distributed via UTP. Some of
the applications are; classroom video distribution,
commercial and home audio/video systems, hospital
video training, video conferencing, and video kiosks.
Note: Baluns must be used in pairs and are
sold individually. •Sold individually
Order #
33-9585
33-9590
Mfr. #
500016
500017
Description
S-Video
S-Video and Audio
(ea.)
$34.95
79.95
CATV Balun
VideoEase™
CCTV Pass-Thru
Balun
The VideoEase™
CCTV Pass-Thru
Balun allows video,
two-wire PTZ control, and remote power to be
transmitted via one 4-pair Cat 5 cable, thus
eliminating the need to install multiple cables for
more efficient cabling in the CCTV security and
surveillance environment. The pass-thru balun may
be used in pairs, or in conjunction with standard
twisted pair cross-connect devices and other MuxLab
CCTV baluns such as the 500000, 500009, 500023 and
500015. Features: •Combines video, PTZ control and
remote power under one 4-pair cat 5 cable for more
efficient cabling •Video up to 2,200' (670m) via Cat 5
UTP •Remote power up to 350' (106m) @ 24VAC/5VA
via two twisted pairs
Mfr. #
500022
(ea.)
$39.00
The
VideoEase
CATV
Balun allows
traditional
75ohm
coaxial cable
to be replaced by a single pair of Cat 5 UTP cable
in the CATV, VHF and FM environments in certain
applications. The CATV Balun allows broadband
CATV equipment to be integrated into structured
cabling systems thereby allowing CATV equipment
to be moved or added to any convenient modular
wall outlet. The VideoEase CATV Balun provides
a versatile cabling solution for broadband video
systems used by schools, government, corporations,
hospitals, financial institutions, hotels and convention
centers. The CATV balun works in conjunction
with CATV splitters, amplifiers and cable modems
for a total cabling solution. Features: Low return
loss eliminates “ghosting”. Pair required for use,
sold individually.
Order #
33-9630
Mfr. #
500302
(ea.)
$59.95
The passive 16 port CCTV hub allows video,
remote power and PTZ control to be transmitted
via one Cat 5 cable, thus eliminating the need to
install multiple cables for more efficient cabling in
the security video environment. The model 500130
features female BNC connections for coax video
output, and the 500131 has female RJ-45 connectors
for twisted pair video output. Features: Space
efficient 1U height •Supports up to 16 inputs
•Port switch to set power-thru, or pass-thru •Pin
configuration table on unit •Works in conjunction
with 500000, 500009, 500015, 500022, 500023,
500024, 500029 and 500120 baluns.
Order #
33-10125
33-10130
Mfr. #
500130
500131
(ea.)
$525.00
525.00
Audio/Video Hub
The VideoEase Audio-Video Hub allows up to two
baseband composite or one S-video signal and up to
two audio signals to be distributed to up to eight
destinations via twisted pair (UTP) cable for more
cost-effective and versatile cabling. The Audio-Video
Hub when used in conjunction with MuxLab’s line
of VideoEase baluns, allows coaxial cable to be
eliminated between the audio-video source and the
destinations. The product works with the CCTV
Baluns (500000, 500009), Stereo Audio-Video Balun
(500001), Dual Audio-Video Balun (500012) and
S-Video Baluns (500016, 500017). A looping output
allows the source input to be distributed to other
baseband audio/video equipment including matrix
switchers, multiplexers, VCRs and monitors.
Applications include: Classroom audio/video
instruction, corporate audio/video presentations,
tradeshow demonstration systems, CCTV security and
surveillance. Features: Up to 2200' in color via Cat 5
twisted pair cable. 2-year warranty.
Order #
33-9615
Mfr. #
500200
(ea.)
$649.00
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
291
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
14
The VideoEase
LongReach™ is
an active CCTV
receiver balun
that provides extended distance between the CCTV
camera and the DVR or multiplexer via copper
twisted pair cable. The LongReach™ features
automatic image adjustment for picture brightness,
sharpness and contrast, thereby helping to reduce
on-site service calls. The LongReach™ supports up
to 5,000' (1,5 km) via Cat 5 twisted pair cable when
used in conjunction with MuxLab’s passive CCTV
baluns (500000 and 500009). Features and benefits:
•Automatic image adjustment helps eliminate service
calls •Up to 5,000' (1.5km) via Cat 5 UTP •Connects
directly to the DVR, multiplexer or switcher •Works
with MuxLab passive CCTV baluns •Eliminates
the need for fiber or coax •Supports NTSC or PAL
•Requires 24VAC (not supplied) •Ground loop
blocking •Voltage surge protection •Auto-resettable
fuse •LEDs for power, video and ground loop fault
•Cable strain relief •1 year warranty
Order #
33-10065
(ea.)
$259.00
(ea.)
$34.95
VideoEase
LongReach™
Mfr. #
500015
Order #
33-9620
(ea.)
$35.00
35.00
#33-9585
Order #
33-9735
16 Port Rackmount Balun Chassis
The rackmount balun chassis is designed as a
head-end cable management solution to allow any
combination of MuxLab square baluns to be installed
in a 19" relay rack. Features: •Supports up to
16 baluns •Baluns install forward rear-facing
•Space efficient, 2U height •Latching mechanism
for secure installation •Snap-in design for ease of
installation •Includes four rackmount screws and
washers •Slot number silkscreen on front and rear
•Mfr. #500900
C52_pg_292
8/13/07
11:09 AM
Page 292
SATV/CATV
section
14
Audio/Video to Category 5 Balun System
Take advantage of Cat 5 (or higher) cable for
interconnecting A/V components over long distances.
Common signal formats such as composite video,
RGB component video, S–video and line level audio
can easily be sent over UTP cable distances up to
400'. In retrofit applications, utilize existing unused
pairs of Cat 5 data cable already in place. In new
construction, take advantage of the smaller size and
lower cost of Cat 5 cable when distributing signals
throughout the structure. Housed in compact ABS
enclosures, each balun accepts standard RJ-45 male
connectors. Completely passive design, these units
require no power. Each unit is clearly labeled to
identify which RJ-45 connector pair is used for the
designated signal path. Sold individually, all
baluns must be used in pairs.
Component Video Balun
Order #
50-7720
14
Back
(1–3)
$49.95
(4–up)
$42.50
L/R Audio Balun
Component Video Balun
Use to send Y/Pb/Pr component video signals over
Cat 5 cable. This balun features three gold plated
male RCA connectors on the end of 8" pigtails color
coded red, green and blue. Additionally, a female
orange RCA connector provides path for digital audio
(SPDIF). Included is a hook and loop tape set which
allows direct attachment to the rear of plasma and
other monitors. Cat 5 connection is a single female
RJ-45 jack. Utilizes four pairs: •Red: Pin 7/8
•Green: Pin 3/6 •Blue: Pin 1/2 •SPDF: Pin 4/5
Specifications: •Distance: 400' max (Cat 5)
•Dimensions:: 1.0" (H) x 3.2" (W) x 2.4" (L)
Order #
50-7722
L/R Audio/Video Balun
Front
Use to send Y/Pb/Pr
component video signals
over Cat 5 cable. This balun
features three gold plated
female RCA connectors, color
coded red, green and blue,
and a single female RJ-45
jack. Utilizes three Cat 5 cable
pairs: •Red: Pin 7/8 •Green:
Pin 3/6 •Blue: Pin 1/2.
Specifications: •Bandwidth:
50Hz~8MHz •Dimensions
(excluding connectors):
1.0" (H) x 3.2" (W) x 2.4" (L)
(1-3)
$59.95
(4-up)
$49.95
Use to send two channels of
unbalanced line level audio over
Cat 5 cable. This balun features
two gold plated female RCA
connectors, color coded red and
white, and a single female RJ-45
jack. Utilizes two Cat 5 cable
pairs: •Red: Pin 1/2 •White:
Pin 3/6. Specifications:
•Bandwidth: 10Hz~50KHz
•Dimensions (excluding
connectors): 0.85" (H) x
1.69" (W) x 1.94" (L)
Order #
50-7725
Front
Use to send composite
video, plus two channels of
unbalanced line level audio
over Cat 5 cable. This balun
features three gold plated
female RCA connectors, color
coded red, white and yellow,
and a single female RJ-45
jack. Utilizes three Cat 5 cable
pairs: •Red: Pin 1/2 •White:
Pin 3/6 •Yellow: Pin 7/8.
Specifications: •Video
bandwidth: 50Hz~8MHz
•Audio bandwidth:
Back
10Hz~50KHz •Dimensions
(excluding connectors): 1.0" (H) x 2.36" (W) x 3.22" (L)
Order #
50-7730
(1–3)
$39.95
(4–up)
$33.95
S–Video Balun
Use to send S–video signal over
Cat 5 cable. Independent balun
circuits provide separate paths
for chroma and luminance signals,
utilizing two pairs of Cat 5 cable.
This balun features a female
4 pin S–video connector,
and female RJ-45 jack. Utilizes
pin 7/8 (luminance) and pin
4/5 (chroma). Specifications:
•Bandwidth: DC~6MHz
Front
•Dimensions: 1.19" (dia.) x 2" (L)
Back
Front
(1–3)
$29.95
(4–up)
$26.26
Order #
50-7735
(1–3)
$19.95
Back
(4–up)
$17.46
#33-10255
Component Video
Distribution Amplifier
#33-10256
HDTV Audio/Video
Distribution Hub and Receiver
Distribute high definition component video and
digital or left or right audio over extended distances
using Cat 5e wire. Video and audio loop output to
accommodate future expansion to additional Cat 5e
transmitters and receivers. Supports 1080i video up
to 300' with Cat 6. Transmitter features: •Active
amplification ensures high-quality •Discrete passive
IR channel for external remote controls •Two RJ-45
outputs for additional location. Receiver features:
•Cable length equalizer for long distances •Video
continuity LEDs to ensure all signals are
transmitting •IR output
Order #
33-10255
33-10256
Mfr. #
Cat5TX
Cat5RX
Description
Transmitter
Receiver
(ea.)
$109.00
129.00
NET 30
Terms
292
Order Online
www.mcmelectronics.com
Allows for multiple signal distribution equal
to the source signal input. Four-way audio/
component-video distribution amplifier for Y,
Cb, Cr and Y, Pr, Pb applications. Features high
performance, low distortion and true one-to-one
signal ratio. These professional grade amplifiers are
cascadable for use in large displays and are enclosed
in metal housings to reduce interference.
Mfr. #AV400COMP.
Order #
33-7050
(ea.)
$119.00
S-Video
Distribution Amplifier
Allows for multiple signal distribution equal to
the source signal input. Four way audio/video
distribution amplifier with S-video inputs and
outputs. Features high performance, low distortion
and true one-to-one signal ratio. These professional
grade amplifiers are cascadable for use in large
displays and are enclosed in metal housings to
reduce interference. Mfr. #AV400SV.
Order #
33-7045
(ea.)
$99.95
High Performance
Distribution Amps
These high performance distribution amplifiers
feature specifications such as a true one-to-one ratio,
no signal loss, low noise, low distortion and
unity gain.
Order #
33-6875
33-6880
Mfr. #
AV400
AV700
Outputs
Four
Seven
(ea.)
$64.95
79.95
C52_pg_293
8/13/07
11:12 AM
Page 293
SATV/CATV
L/R Audio Plus
S–Video Balun
Front
Use to send S–video, plus two
channels of unbalanced line
level audio, over Cat 5 cable.
Independent balun circuits
Back
provide separate paths
for chroma and luminance
signals, and left and right
audio signals, utilizing four
pairs of Cat 5 cable. This balun
features a female 4 pin
S–video connector, two gold
plated female RCA connectors,
color coded red and white, and a female RJ-45 jack.
Specifications: •Pairs utilized: Luminance 7/8,
Chroma, 4/5, Audio (red) 1/2, •Audio (white) 3/6
•Video bandwidth: DC~6MHz •Audio bandwidth:
10KHz~50KHz •Dimensions (excluding connectors):
1.0" (H) x 2.36" (W) x 3.22" (L)
Order #
50-7740
(1–3)
$49.95
(4–up)
$43.78
BNC Video + DC
Power Balun
Front
Front
Use to send composite
video signal and low
voltage DC over Cat 5
cable. This balun’s
very compact size and
male BNC connector
makes for easy
attachment directly
Back
to equipment such as
monitors, processors
and cameras. In addition to the BNC connection,
two screw terminals are provided for direct access
to a second cable pair. This is ideal for remotely
providing DC power to devices such as surveillance
cameras and small LCD television monitors. Utilizes
two cable pairs: •Pin 7/8 video •Pin 4 power (+)
•Pin 5 power (–) Specifications: •Bandwidth:
50Hz~8MHz •Maximum recommended distance
for power: 300' (using 12VDC, 500mA) •Dimensions
(excluding connector): 1.0" (H) x 0.85" (W) x 2.0" (L)
Order #
50-7745
(1–3)
$16.95
(4–up)
$14.94
section
14
Back
RCA Composite Video Balun
Use to send composite video signal over Cat 5 cable,
this baluns features very compact size, and a male
RCA connector for easy attachment directly to
equipment including monitors, VCRs, DVD players,
processors and cameras. A specially designed tool-less
IDC connector provides quick, reliable connection
to unterminated Cat 5 cable. Specifications:
•Bandwidth: 50Hz~8MHz •Distance: 400' max,
using 24AWG UTP •Dimensions (excluding
connector): 0.813" (H) x 0.813" (W) x 1.875" (L)
Order #
50-7748
(1-3)
$14.49
(4-up)
$12.88
#50-7727
BNC Video Balun
Front
Use to send composite
video signal over
Cat 5 cable, this balun’s
very compact size and
male BNC connector
makes for easy
Back
attachment directly
to equipment including
monitors, processors and
cameras. Due to their
low cost, and slim design,
multiple units may be
connected side–by–side to equipment. A specially
designed tool–less IDC connector provides quick,
reliable connection to unterminated Cat 5 cable.
Specifications: •Bandwidth: 50Hz~8MHz
•Dimensions (excluding connector): 0.625" (H) x
0.625" (W) x 1.563" (L)
Order #
50-7750
(1–3)
$14.49
(4–up)
$12.88
Video Balun
Front
Use to send composite
video signal over Cat 5
cable. This balun features
a gold plated female
RCA connector, and
female RJ-45 jack.
Screw terminals
are available for
connecting unterminated
Cat 5 cable. Utilizes one
Back
pair (pin 7/8) of Cat 5
cable. Specifications:
•Bandwidth: 50Hz~8MHz •Dimensions (excluding
connector): 1.0" (H) x 0.85" (W) x 2.0" (L)
Order #
50-7710
(1–3)
$15.95
(4–up)
$14.16
Two Channel
Balanced Audio Balun
Send two balanced channels of
line level audio over a single Cat 5
cable at distances of up to 1000'.
Rugged steel housing features two
XLR connectors on one side, and
a single female RJ-45 connector #50-7728
on the other. Specifications:
•Frequency response: 10Hz~50KHz,
-0.5dB, +4dB •THD: 0.1% @1KHz
•Dimensions: 1.1" (H) x 3.5" (W) x 2.5" (D)
•Male and female models may be intermixed
•Sold individually, baluns must be used in pairs
Order #
50-7727
50-7728
XLR
Female
Male
(1-3)
$59.95
59.95
(4-up)
$53.96
53.96
14
Component A/V HDTV Distribution Amplifier
Allows for multiple signal distribution equal to source signal
input. Distribute digital/HDTV and analog television signals
from a single A/V source to nine televisions/receivers, or use
one of the output ports to cascade additional distribution
amplifiers. Features: •Component video (Y, Pr, Pb) and
audio distribution •Compatible with all HDTV, digital
and analog signals •High performance, low distortion,
one-to-one signal ratio ensures equal picture quality •Unlimited
cascade capability •Mfr. #AV901COMP
Order #
33-10080
(ea.)
$159.00
Component A/V HDTV Distribution Amplifier with Digital Audio
Allows for multiple signal distribution equal to source signal input.
Distribute digital/HDTV and analog television signals, including
digital audio and composite video from a single A/V source to nine
televisions/receivers, or use one port as a loop-thru output port
to cascade additional distribution amplifiers. Features:
•Component video (Y, Pr, Pb, or Y, Cr, Cb), composite video and
SPDIF digital audio distribution •Compatible with all HDTV,
digital and analog signals •High bandwidth (>50MHz)
performance, low distortion, and one-to-one signal ratio
ensures equal picture quality. Power: 9~10VAC, 500mA adaptor
included. Mfr. #AV901HD.
Order #
33-10090
(ea.)
$239.00
Component A/V HDTV Switch with Digital Audio
Allows the connection of up to four HD A/V sources (e.g., VCR, DVD,
digital receiver, set-top-box) to two common sets of output jacks. The
common output jacks can be used to drive two TVs, or one TV
and one VCR recorder, for example. Features: •Component
video (Y, Pr, Pb) •SPDIF digital or analog audio •Compatible
with all HDTV, digital and analog signals •High bandwidth
(>50MHz) performance, low crosstalk, and one-to-one signal
ratio ensures equal picture quality •IR remote control included
Power: 9~10VAC, 500mA adaptor included. Mfr. #SW401HD.
Order #
33-10095
(ea.)
$159.00
Component Audio/Video HDTV
Distribution Amplifier with Digital Audio
Allows for multiple signal distribution equal to source
signal input. Distribute digital/HDTV and analog
television signals, including digital audio and
composite video from a single A/V source to five
televisions/receivers, or use one loop-thru output
port to cascade additional distribution amplifiers.
Features: •Component video (Y, Pr, Pb, or Y, Cr, Cb),
composite video and SPDIF digital audio distribution
•Compatible with all HDTV, digital and analog
signals •High bandwidth (>50MHz) performance, low
distortion, and one-to-one signal ratio ensures equal
picture quality Power: •9~10VAC, 500mA adaptor
included •Mfr. #AV501HDX
Order #
33-10087
(ea.)
$169.00
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
293
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
C52_pg_294
8/13/07
11:06 AM
Page 294
SATV/CATV
2 x 1 HDMI
Switcher
•Switch
between any
two HDMI
inputs •Compatible with
any HDMI source •Supports up to
1080p resolutions and is HDMI, HDCP and DVI
compliant Features: •Two HDMI Inputs, one
HDMI output •Signal enhancement feature; improve
signal quality of longer cable runs •LED power,
enhancement and source indicator lights •Manual
input selection with buttons on unit Includes:
•HDMI switcher and AC adaptor
section
14
Order #
80-6860
HDMI ThreeWay Switcher
Mfr. #
VS-H21
(1-9)
$79.95
(10-up)
$74.55
Back
Order #
80-6780
Get the most out of HDTV! •Connect three HDMI
sources to a single input on a TV •Automatically
switches to the selected source •Switch between
sources without compromising the signal •Full 1080P
transmission •HDCP compliant
Order #
SWV6813/17
(1-4)
$99.95
14
Smart HDMI
Switches
Get crystal-clear,
high-definition HD
video and multichannel audio for the
ultimate home theater
experience. These
advanced switches
#33-10270
connect up to three
HDMI components to
a single HDTV, and
automatically switch
between source
components when
powered on.
#33-10275
Specifications: •Video
amplifier bandwidth: 1.65GHz compatible •Format
support: DVI, HDCP •Resolution support: 480p, 720i,
720p, 1080i, 1080p (up to UXGA -1600x1200)
•Input/output connectors: HDMI type A.
Order #
33-10270
33-10275
Description
2 x 1 HDMI switch
3 x 1 HDMI switch
Power
Self-powered
5VDC powered
adaptor included
(ea.)
$59.95
79.95
Front
3 x 1 HDMI Switch
•Three HDMI inputs, one HDMI output •Signal
enhancement feature improves signal quality by
simply touching a button •LED source indicator light
•Slim design, less than 1" thick! •Slim size remote
included Specifications: •HDMI 1.1, HDCP 1.1, and
DVI 1.0 compliant •Supported input resolutions:
PC - VGA, SVGA, XGA, SXGA, UXGA (1600x1200),
HDTV: 480i, 576i, 480p, 576p, 720p, 1080i and 1080p
•Frequency bandwidth: 1.65gbps (single link)
•Inputs: 3 x HDMI type A female ports •Output:
1 x HDMI single link female port •Dimensions: 7.9" x
4.1" x .9" •Weight: 1.25 lbs. •5V universal power
supply included
(ea.)
$129.00
1 x 4 HDMI Distribution Amplifier
•One HDMI input, four HDMI outputs •Signal
enhancement feature improve signal quality by
simply touching a button •LED indicator light on
each output •Slim design, less than 1" thick! •Slim
size remote included Specifications: •HDMI 1.1,
HDCP 1.1, and DVI 1.0 compliant •Supported input
resolutions: PC - VGA, SVGA, XGA, SXGA, UXGA
(1600x1200), HDTV - 480i, 576i, 480p, 576p, 720p,
1080i and 1080p •Frequency bandwidth: 1.65gbps
(single link) •Inputs: 1 x HDMI type A female ports
•Output: 4 x HDMI single link female port
•Dimensions: 7.9" x 4.1" x .9" •Weight: 1.25 lbs.
•5V universal power supply included
Order #
80-6840
(1-9)
$429.00
HDMI Cable
Extender
Extend the combined total length
of your HDMI cable up to 115'
with this internally powered HDMI
signal repeater. Specifications: •Video
amplifier bandwidth: 1.65GHz compatible •Format
support: DVI, HDCP •Resolution support: 480p,
720i, 720p, 1080i, 1080p (up to UXGA -1600 x 1200)
•Input/output connectors: HDMI type A. •Power:
5VDC internal power (from HDMI source).
Order #
33-10280
(ea.)
$79.95
Audio Video Switcher
with Component Video
Provides the necessary A/V inputs for adding
components to your TV and home theater system.
Has five audio/video inputs including component
video, S-video and digital audio plus dual outputs
to feed your TV and either a receiver or VCR for
recording. The VS-502 will help make the transition
to HDTV easy! Features: •Easy video conversion:
Switch between three different video types including
up-converting composite to S-video and composite and
S-video to component video. •Auto input sensing:
Detects the current unit in use and automatically
connects to that input, without having to push
any buttons! •Automatic volume stabilization:
Volume compression setting pulls loud and soft
sounds toward a mid-point in the dynamic range.
•Two independent output channels: Two outputs
let you select one source for viewing (like the DVD)
to watch on your TV and a second source for
recording (like the DSS) to feed to your
VCR for recording at the same time.
Order #
80-6690
Mfr. #
VS-502
(1-9)
$186.00
(10-up)
$181.28
Front
Back
Back
Multiple Source HDMI Distribution Amplifiers
Splits, amplifies and extends two, or four HDMI
source inputs (eg. digital cable box, DVD player) to
up to eight HDMI HDTV displays (eg., HDTV, LCD
projector). Use as an extender by placing at the end
of a long HDMI cable to regenerate the HDMI signal.
Features: •Supports high definition resolutions up
to 1080p and UXGA •H.D.C.P. (High-Bandwidth
Digital Content Protection) compliant •HDMI v1.2
compliant •Total transmitting range: 100' (1080p);
total length. Specifications: •Video amplifier
bandwidth: 1.65Gbps •Single link range: 1080p
(1920 x 1200) •Vertical frequency range: 60Hz
•Power consumption: 10W, max •Input DDC
signal: 5V p-p •HDMI output: 5VDC, 500mA.
Order #
33-10422
33-10423
Description
2-in x 4-out
3-in x 8-out
Dimensions (LxWxH)
(ea.)
8.07" x 4.55" x .79"
$399.00
13.7" x 6.71" x 1.26"
599.00
NET 30
Terms
294
Order Online
www.mcmelectronics.com
Single Source HDMI Distribution Amplifiers
Remote Control Audio/Video Selector
Splits, amplifies and extends a single HDMI
source input (eg. digital cable box, DVD player) to
two or four HDMI HDTV displays (eg., HDTV, LCD
projector), simultaneously. Ideal for home theater,
conferences, conventions, restaurants, school
and corporate training presentations. Use as
an extender by placing at the end of a long HDMI
cable to regenerate the HDMI signal. Features:
•Supports high definition resolutions up to 1080p
and UXGA •H.D.C.P. (High-Bandwidth Digital
Content Protection) compliant •HDMI v1.2 compliant
•Total transmitting range: 100' (1080p); total length.
Specifications: •Video amplifier bandwidth:
1.65Gbps •Single link range: 1080p (1920 x
1200) •Vertical frequency range: 60Hz •Power
consumption: 10W, max •Input DDC signal:
5V p-p •HDMI output: 5VDC, 500mA.
This switcher can handle almost any consumer
audio/video device you can throw at it. With the most
common audio and video inputs; S-video, composite
video, toslink digital audio and line level audio, you
can connect your DVD, satellite receiver, VCR or
game system to your home entertainment system.
The switcher has three audio/video inputs and one
audio/video output and an ultra thin
remote control.
Order #
33-10420
33-10421
Description
1-in x 2-out
1-in x 4-out
Dimensions (LxWxH)
(ea.)
4.72" x 2.62" x .79"
$149.00
8..5” x 4.5” x 1.0”
199.00
Order #
33-7755
(ea.)
$59.95
(2-4)
$58.50
(5-up)
$57.17
C52_pg_295
8/13/07
11:06 AM
Page 295
SATV/CATV
section
Back
14
BACK
S-Video Distribution Amplifier/Selector
Tabletop distribution amplifier allows selection
between two A/V inputs and provides six outputs.
Separate paths are provided for composite video and
S-video sources. Independent left and right audio
signal paths allow compatibility with stereo sources.
Front panel pushbutton AV1 or AV2 input source, or
select automatic mode, which sets AV2 as the default
input, automatically switching to AV1 when a signal is
present (switching based on the presence of audio
signal). An internal amplifier maintains signal quality
when distributed to all six outputs. Gain at each
output is 2dB over input signal level. Front panel 1⁄4"
stereo headphone jack, with level control. Rugged
metal enclosure measures 13⁄4" (H) x 111⁄2" (W) x 51⁄4"
(D), including non-skid rubber feet. Note: Either
composite or S-video inputs may be utilized, but not
both. Requires 12VDC, AC adaptor included.
Order #
50-7775
(1-3)
$59.95
(4-up)
$55.57
T
Front
A/V Digital Analog Selector with IR Remote
Full-featured switcher connects up to three
“like-kind” sources (HDMI to HDMI, VGA to VGA,
etc.) to a single HDTV display. Features: •HDMI,
VGA, RGB component video, and composite A/V
connections •Delivers clean, uncompressed digital
signals •Engineered for optimal signal transfer
and minimal signal loss •Built-in HDMI output
signal extender up to 100' (total length) •H.D.C.P.
(High-Bandwidth Digital Content Protection)
Compliant •Supports high definition 1080p and
UXGA •Compact, time-saving LED illuminated
control center and easy selection with remote
control or front panel push-button controls
•Power: 6V,400mA AC/DC power adaptor
(included) •Dimensions: 121⁄2" x 6" x 21⁄4".
Order #
33-10424
(ea.)
$159.00
Video Ground Loop
Isolator
Ground loops
in composite
video systems
can cause video distortions such as
herringbone and AC beat. Uniquely
designed to eliminate ground loop related distortions,
this transformer features RCA female-to-female
connectors with a separate 9' RCA male-to-male
pigtail cable that facilitates multiple installation
configurations and helps reduce cable connector
strain. Specifications: •Insertion loss: <0.5db
•Frequency response: 0~3db @ 10MHz •Input/output
resistance: 75ohm •Built in 600VDC transient
voltage surge suppression (12V RMS) •No power
required (passive).
Order #
33-6927
(1-3)
$29.95
Three-Way Audio/
Video Switch Box
Audio/Video Amplifers
Order #
32-4430
32-4435
Description
Four-way
Six-way
Order #
50-6195
(1-5)
$18.49
(6-9)
$17.02
(10-up)
$14.27
(ea.)
$29.95
39.95
S–VHS A/V selector
switch for use with
DSS, DVD and other
video products with Y/C (S–VHS) outputs. Four
Y/C inputs for video and four RCA stereo inputs for
audio to one Y/C output and one RCA audio output.
Specifications: Band width, 20Hz~10MHz.
Isolation: 30dB minimum.
Order #
33-4135
(ea.)
$19.95
Rear
Panel A/V
Extenders
#24-6595
Easily
connect and re-connect video games, camcorders
and portable audio/video devices to your television’s
audio/video inputs without having to turn the
television around each time. These extenders will
save your back from strains and virtually eliminate
the danger of dropping your television every time
you plug into the A/V inputs. Standard A/V inputs
via “RCA” type jacks on the front or side of your
television and “RCA” type plugs for the rear.
Available with S-video capability for such
equipped devices.
Order # Description
(ea.) (2-4) (5-up)
24-6595 A/V and S-video (shown) $14.95 $13.50 $12.00
24-6600 A/V only
12.95 11.50 10.75
Back
•Hook up multiple video game systems, DVDs, VCRs,
and any other A/V device to any TV that lacks the
required number of AV inputs •4 inputs allow you to
automatically switch between desired components
•Features 4 audio/video, S-video, and component
inputs; composite, S-video and component out
•Component inputs provide ultimate picture
performance and are found on most quality
TVs/HDTVs and DVDs •Easy to hook-up and
prevents cable swapping issues that could result in
the jacks on the TV needing to be replaced.
Order #
PH61150
BACK
S–VHS A/V Switch
High Definition
Automatic Switcher
(1-4)
$29.95
Six-Way Video Selector
Tabletop video switcher provides independent
selection of up to six A/V sources, routing them to
two different destinations. Select from inputs such
as a satellite receiver, digital cable box, DVD player,
DVR, VCR or video game. Dual outputs, with
independent selectors, allow easy recording of one
source, while viewing another, or viewing of two
different sources on separate monitors. Inputs and
outputs are standard line level L/R audio, composite
video, and S-video. S-video connections are standard
four-pin DIN female, all others are RCA type
female. Rugged metal enclosure measures 13⁄4" (H) x
111⁄2" (W) x 51⁄4" (D), including non-skid rubber feet.
Note: Either composite or S-video inputs may be
utilized, but not both. This selector will not convert
from one video format to the other. Passive device
requires no power.
Order #
50-7780
(1-3)
$37.89
(4-up)
$35.12
Video Source
Selector
•Easily
connects
up to four home theater components to one output
•S-video or composite audio/video connections
•Includes remote control
Order #
VH915
(ea.)
$54.95
Composite Video to
S-Video Adaptor
This high quality adaptor
converts composite video to
S–video and S–video to
composite video. With a male S–VHS connector on
one end and a female RCA type connector on the
other (#33-0001), only a standard RCA type video
cable is required for connection or you can match
the S-video adaptor to your cables. The adaptor
measures only 13⁄4" long and 1⁄2" in diameter allowing
it to plug directly into the equipment and solves the
problems associated with mixing composite and
S–video inputs and outputs. Note: This unit is a
passive device and although it will allow composite
video signals to be used in S–video inputs the signal
will remain the quality of composite video.
Order #
33-0001
33-0002
33-0003
Description
S male to RCA female
S female to RCA female
S female to RCA male
(ea.)
$7.39
5.99
5.99
(2-up)
$7.10
5.77
5.77
NET 30
Terms
OrderToll
Toll
Free
Order
Free
Fax
FAX
295
1-800-543-4330 1-800-765-6960
1-800-543-4330,
1-800-765-6960
14
•Perfect for in–store display demonstration walls
or karaoke display •One input distributes four
or six amplified outputs •Video and stereo sound
input via RCA jacks •Four or six outputs, video
and stereo sound via RCA jacks •Frequency range:
•20Hz~10KHz •Isolation: 30dB minimum •Video
input: 75ohm •Audio input: 20Kohm •Operates
from 15V/300mA adaptor •Adaptor included
Tabletop control box
allows selection of
multiple A/V sources.
Ideal when connecting
several devices, such as CCTV cameras, camcorders,
VCRs, laser disk players and satellite receivers to a
single video monitor or VCR. Accommodates video and
left and right audio, all connections are all RCA type
female. Metal case has non-skid rubber feet and stays
securely in place. Dimensions: 6.9" (W) x 2.2" (H) x
3.9" (D). Sloped front, black color.
C52_pg_296
8/13/07
11:08 AM
Page 296
Remote Control
A/B Switch
SATV/CATV
section
Audio/Video Matrix Switcher
14
Front
Back
A/V Distribution Amplifier/Selector
Tabletop distribution amplifier allows selection
between two A/V inputs and provides up to four
outputs. Independent left and right audio signal
paths allow compatibility with stereo sources
including CD/DVD players, VCRs, video games and
satellite receivers. Front panel pushbutton selects
between two input sources, and internal amplifier
maintains signal quality when distributed to four
outputs. Gain at each output is 2dB over input
signal level. Rugged metal enclosure measures
15⁄8" (H) x 7" (W) x 27⁄8" (D), including non–skid
rubber feet. Color–coded input/output connections
are RCA type female. Requires 12VDC, AC
adaptor included.
Order #
30-1376
(1-3)
$26.29
(4-up)
$24.43
14
Audio/Video
Selector
Connect four
audio/video
components and a set of
powered speakers to your TV, all at one time. This
means no more hassels connecting and reconnecting
A/V components. Terk’s Video Selector features
multiple S–video jacks so you can optimize the
performance of all your components. Mfr. #VS-4.
Order #
80-4760
(ea.)
$41.20
Electronic
Fiber Optic Switches
These optical selector
switches allow you to
expand the inputs of your
optical devices. No need
to swap your expensive
optical cables between
multiple recorders and
players. This switch
features four Toslink
inputs and two Toslink
outputs for maximum
flexibility. The construction of these
units provides optimum light signal
transfer for high quality recording
and playback.
Order #
24-6590
(ea.)
$442.79
Remote Control
A/V Switch
Easily select from
as many as four
separate A/V
inputs by remote
control. Ideal for
home theater
systems where the base band A/V signal is the
desired source. Specifications: Band width:
20Hz~10MHz. Gain: 1dB. Isolation: 50dB minimum.
Inputs: Four sets via RCA type connectors. Outputs:
Two sets via RCA type connectors. Power source:
120VAC, 300mA.
Order #
33-4140
(ea.)
$50.95
Audio/Video Selector
•Perfect for the
entertainment center
•Combines four
different video devices
(VCR, laser disc player,
etc.) into one output •Compatible with both mono
and stereo devices •Four audio/video inputs, one
audio/ video output •20Hz~10MHz frequency range
•Isolation 30dB minimum
(ea.)
$17.95
Audio/Video
Switcher
(ea.)
$81.08
Add additional
components to
your TV and home theater system by providing
additional A/V inputs to your system. Four A/V
inputs including composite video and Y/C (S–video).
Mfr. #SVS-14.
Order #
80-3450
•Audio/video selector with
connection capabilities for
3 audio/game inputs •Sleek
compact design •Passive
design requires no
power supply
(ea.)
$29.95
Coaxial Cable Switch
(ea.)
$16.59
NET 30
Terms
296
Order#
33-7760
Order #
32-4420
Game and Video Selector
Order #
SB-V31G
Put an end to cable swapping and take control of
your audio/video system like never before. Video
matrixes allow you to send audio/video signals from
any of the eight inputs to any of the eight outputs
with the touch of a button. The audio/video from any
source connected to the matrix can easily be routed
to the input of any audio/video device connected to
the matrix. The matrix can split the audio and video
sources allowing you to add music to a video dub.
Control the operation from a PC via the RS-232C
port. Genlock inputs provide steady video signals
for optimum picture quality. This Matrix is a cost
effective solution for home audio video systems,
home theaters, video production facilities and
schools. Specifications: Video: Composite
input/output, 1V p-p, 75ohm. S/N ratio: -60dB.
Crosstalk: -60dB. Connectors: BNC (use #27-405
with RCA type video cables). Audio: Input/output:
High impedance, unbalanced. THD: <0.1%.
Frequency response: 20Hz~20KHz, +/- 3dB. S/N
ratio: >90dB. Crosstalk: -90dB. Power:
120VAC, 60Hz.
Order Online
www.mcmelectronics.com
•Two input, slide type A/B
switch for CATV, MATV,
MDS, SATV, and VCR
applications •Offers a
quick selection from
regular TV antenna and
cable VCR or other input
sources •60dB isolation
typical •5~900MHz bandwidth •Output 75ohm
Order #
33-380
(1-9)
$3.99
(10-up)
$3.58
•Allows you to
switch between
two 75ohm inputs
(cable, antenna,
satellite or dual
cable systems) •75ohm
output (TV) •AC adaptor:
120VAC/12VDC, 100mA
included •5MHz~900MHz
bandwidth •89dB isolation
•UL listed •Remote requires
two “AA” batteries not included
Order #
32-4425
32-4426
Description
Switch
Replacement remote
(ea)
$27.95
7.95
(2-up)
$23.64
-
Audio/Video
Selector
•SB–V40S
accommodates
four audio/video sources
with a choice of S–video
Back
or composite video
connections •Adds flexibility to existing
systems Specifications: •Inputs: Four A/V inputs
with S–video (Y/C) jacks and composite video phono
jacks, L/R audio phono jacks •Output 1: A/V output
with S–video (Y/C) jack and composite video phono
jack, L/R audio phono jacks •Output 2: Audio output
with stereo mini jack •Weight: 6.5 oz. (185g)
•Dimensions: 71⁄8" x 13⁄4" x 23⁄8" (179 x 43.9 x 60mm)
Order #
SB-V40S
(1-3)
$49.95
(4-up)
$46.30
RF Switch
The AB–4 features an
internal secondary shield
and a molded plastic outer
cover, providing excellent RF
shielding. This durable push–button
type switch ensures reliable and contact
closure. The AB–4 is supplied with male “F”
connectors and necessary mounting hardware.
Electrical specifications: •Frequency range:
5~900MHz •Insertion loss: 0.2dB (5~250MHz), 0.5dB
(250~900MHz) •Isolation: 85dB (5~250MHz), 65dB
(250~900MHz) •Connectors: “F” type, female
Order #
33-2895
(1-9)
$4.59
(10-up)
$4.21
Nintendo Type Automatic
TV–Game Switch
•Replaces antenna
game switch supplied
with Nintendo and
other video game systems
•Automatically switches
from antenna to game whenever
game is turned on •Eliminates
constant unhooking of antenna
system •8' cable cord included
Order #
33-1310
(1-9)
$5.95
(10-up)
$5.16
High Isolation Switches
•Three–way coaxial A/B/C
switch •Use for antenna,
CATV or VCR •Greater
than 65dB isolation
through 550MHz and
50dB through 900MHz
Order #
33-1490
33-1485
Description
A/B/C
A/B
(1-9)
$12.95
4.95
(10-up)
$10.25
4.19
Deluxe A/B Switch
•Two input, 75ohm, high isolation
•Features zinc die–cast housing
•Molded PVC outer case with
mounting flanges •5~900MHz
bandwidth •90dB isolation “off”
Order #
33-390
(1-9)
$5.59
(10-up)
$5.29
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising