Epson PowerLite 1825 Quick Start Guide

PowerLite 1825
®
2
Quick Setup
Before using the projector, make sure you read the safety
instructions in the User´s Guide on your projector CD.
1 Turn On Your Equipment
1
3
onnect the power cord to the back of the projector and plug the other
C
end into an electrical outlet.
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or enlarge the image.
Focus
Zoom
If your image looks like
,
,
, or
, press the Quick Setup
button on the projector and follow the on-screen instructions.
3 C hoose a
2
Presentation Method
pen the A/V Mute slide (lens cover). Make sure the slide is opened
O
completely.
How do you want to get images to the projector?
• To connect to a notebook, see “If connecting to a notebook” below.
• To project over a wireless network, see “If projecting wirelessly” on the back of this sheet.
3
4
emove the battery cover on the remote control. Locate the two AAA
R
batteries that came with the projector and insert them. Then replace the
battery cover.
o turn the projector on, press the Power button on the projector or
T
the remote control. The projector beeps once, and the projector’s
Power light flashes green and then stays on.
Computer cable
You must have installed the projector’s EasyMP® software and configured
your projector and computer before you can project wirelessly. See your
User’s Guide for instructions.
• To give a presentation stored on a CompactFlash® memory card, flash drive, digital camera, or other USB storage device, see Chapter 5 in your User’s Guide.
• To connect to your notebook using the included USB cable, see your User’s Guide. Power light
Power button
If connecting to a notebook...
1
urn on the projector and adjust the image as described in T
sections 1 and 2 on this sheet.
2
L ocate the computer cable that came with the projector. Connect one end to the projector’s blue Computer1 port.
Connect the other end to your notebook’s video-out port or monitor port.
To shut down the projector:
1.
Press the
2.
hen the orange light stops flashing and the projector beeps, W
you can unplug the projector.
2
1
Power button twice.
Adjust the Image
o raise the image, press the foot release button for the front adjustable
T
foot and lift the front. Release the button to lock the foot in position.
3
ress the Source Search button on the projector or the P
Search button on the remote control until your computer image is displayed.
NOTE: If your notebook has a DVI connector, you need to use an
optional DVI-to-VGA adapter with the included computer cable
(see your computer’s documentation).
Turn over
*411303300*
*411303300*
4
5
If you see a blank screen or you don’t see the image you are trying to project from your computer, make sure the Power light on the
projector is green and not flashing, and the A/V Mute slide (lens cover)
is open. If you‘re using a PC notebook, hold down the Fn button on the
keyboard and press the function key that lets you display on an
external monitor. It may have an icon such as
, or it may be
labeled CRT/LCD. (Allow a few seconds for the projector to sync up.)
5
Select Quick Connection Mode and click OK.
If you see this screen,
click Yes.
You see this
screen:
6
nce the name of your projector appears, select it and click Connect.
O
If a projector is in use and is “locked” to prevent interruption, you
won’t be able to select it.
7
If you see a message asking for a keyword, enter the four digits that
appear on the EasyMP Network Screen and click OK. You see the image on your monitor transmitted to the projector, and a floating control bar appears on the computer screen:
If your projector and notebook don’t display the same image, do the following:
Windows®: Try using the CRT/LCD or
function key, as described
above. If this doesn’t work, double-click Display in the Windows
Control Panel. In Windows Vista,® right-click on the desktop and select
Personalize, then select Display Settings. Make sure both the LCD
screen and monitor port are enabled. See your Windows online help for details.
Macintosh®: From the Apple® menu, select System Preferences,
then click Displays. Select the VGA Display or Color LCD dialog
box, click the Arrangement (or Arrange) tab, and make sure Mirror Displays is checked.
If projecting wirelessly...
Follow the steps in this section to project over an 802.11g, 802.11b, or
802.11a wireless network from a computer running Windows 2000, XP, or
Windows Vista, or Macintosh OS X 10.3 or later.
NOTE: You must have already installed the projector’s EasyMP (EMP NS
Connection) software and configured your projector and computer. See the User’s Guide for instructions. Also, your computer must have a wireless card or built-in wireless connection.
Click here to minimize
You can also project wirelessly without installing software by using the
Network Projector function with Windows Vista.
1
Install the wireless module. If necessary,
secure it using the screw included with
your projector.
8
2
urn on the projector and adjust the
T
image as described in sections 1 and 2 on
the front of this sheet.
Where To Get Help
3
S elect EasyMP as the source by pressing the EasyMP button on the
remote control.
The projector displays a screen like this:
hen you’re done with your presentation, click Disconnect on the
W
control bar.
For more information about using the projector, install the User's Guide
from your projector CD.
Telephone Support Services
To use the Epson PrivateLine® Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card that came with your
projector. This service is available 6 AM to 6 PM, Pacific Time, Monday
through Friday, for the duration of your warranty period. You may also
speak with a projector support specialist by dialing one of these numbers:
U.S.:
(562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday through Friday Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday through Friday
Days and hours of support are subject to change without notice. Toll or long
distance charges may apply.
4
indows: From the Start menu, select Programs or All Programs.
W
Then choose EPSON Projector and select EMP NS Connection.
Macintosh: Double-click the EMP NS Connection icon in your
Applications folder.
You see this screen:
Internet Support
Visit Epson’s support website at epson.com/support and select your
product for solutions to common problems. You can download utilities and
documentation, get FAQs and troubleshooting advice, or e-mail Epson with
your questions.
Visit http://www.presentersonline.com to access tips, templates, and training
for developing successful presentations.
Register today to get product updates, special promotions, and
customer-only offers. You can use the registration card or CD included
with your projector, or register online at www.epson.com/webreg.
Epson and EasyMP are registered trademarks and Epson Exceed Your Vision is a trademark of Seiko Epson Corporation.
PowerLite and PrivateLine are registered trademarks of Epson America, Inc.
General Notice: Other product names are for identification purposes only and may be trademarks of their respective owners.
Epson disclaims any and all rights in those marks.
The contents of this manual are subject to change without notice.
© 2007 Epson America, Inc. 12/07 CPD-24799
Printed in XXXXXX

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project