Crestron | DMPS-300-C | Specifications | Crestron DMPS-300-C Specifications

Crestron DMPS-300-C Specifications
DMPS-300-C
DigitalMedia™ Presentation System 300
>> High-Definition multimedia system switcher, mic
mixer, audio DSP, amplifier, and control system
>> Integrated DigitalMedia™ switcher featuring
DM 8G+™ technology
>> HDBaseT® Certified — Enables direct connection
to third-party HDBaseT devices
>> Matrix signal routing for up to 7 simultaneous
sources and 4 displays
>> Handles HDMI®, DVI, DisplayPort Multimode,
HDBaseT and SPDIF digital sources
>> Handles RGB, composite, S-Video, component,
and stereo audio analog sources
>> Features auto-detecting, auto-switching inputs
for all types of video and audio sources
>> Includes built-in 6-channel gated microphone mixing w/DSP
>> Affords versatile audio signal mixing and routing to
7 separate outputs
>> Allows audio-follow-video or breakaway switching for all inputs
>> Enables HDMI audio signal extraction and embedding
>> Provides 3 stereo analog outputs with independent DSP
per output
>> Features built-in 40 Watt amplifier, selectable for 8 Ohm stereo
or 70/100 Volt mono operation
>> Multi-channel PCM, Dolby®, and DTS® audio signals can be
routed to the HDMI and DM 8G+ outputs
>> DigitalMedia 8G+™ connectivity affords single-wire CAT5e
interface for remote sources and displays [2]
>> Furnishes Power over DM® or HDBaseT for
PoDM/PoH-powered devices [3]
>> QuickSwitch HD® technology manages HDCP keys for fast,
reliable switching
>> Auto-Locking™ technology achieves rapid switching between
disparate sources
>> Performs automatic AV signal format management via EDID
>> Scaler options provide discrete image optimization for each
display device
>> Integrated Ethernet switch provides a single-point
LAN connection
>> Private Network Mode — requires just two IP addresses for the
complete system
>> 2-Series control system provides fully-programmable
device control
>> Supports Crestron touch screens, keypads, and
wireless remotes
®
>> XPanel with Smart Graphics™ computer and Web based control
>> iPhone®, iPad®, and Android™ control app support
>> Crestron Fusion® Enterprise Management Software support
>> SNMP support
>> Provides easy setup and diagnostics via front panel or software
>> Internal universal power supply for worldwide compatibility
>> 3-space 19-inch rack-mountable
crestron.com
| 800.237.2041
The DMPS-300-C from Crestron® is a complete, high-definition
presentation control and signal routing solution for classrooms,
boardrooms, lecture halls, and videoconference rooms. Integrating the
control system, multimedia matrix switcher, mic mixer, audio DSP, and
amplifier all into one 3-space rack mount package, the DMPS-300-C
affords extensive signal routing flexibility and high-performance signal
processing without the need for separate components. Auto-configuring
inputs enable plug-and-play compatibility with a wide range of digital and
analog sources. Built-in DigitalMedia and HDBaseT® connectivity afford a
streamlined wiring solution for interfacing with remote AV sources,
computers, and display devices.
HD System Switcher
The DMPS-300-C provides high-performance routing of numerous digital
and analog sources to up to four separate projectors, flat panel displays,
codecs, touch screens, and other devices. Connectivity is provided for up
to five HDMI® sources[1], or other combinations of HDMI, RGB, SPDIF,
analog audio, and analog video sources (plus additional remote sources
via DM 8G+™ or HDBaseT). Input auto-detection and auto-switching
eliminates the need to configure the inputs - simply connect your source
and the DMPS-300-C selects the right audio and video combination.
Built-in matrix switching allows routing of seven simultaneous sources
to four different digital AV devices and three additional analog
audio components.
Flexible Audio Routing
The HDMI, SPDIF, and analog audio inputs may be configured to
follow their associated video inputs, or switched independently. In fact,
the audio from any HDMI source can be extracted from the digital stream
and converted to analog to feed an outboard processor, mixer, or codec,
with the return signal feeding back through any analog input, which can be
embedded with any video source to form a new HDMI output. Routing of
multi-channel PCM, Dolby®, and DTS® audio sources is supported through
the HDMI and DM 8G+ outputs. The HDMI, SPDIF, and analog audio inputs
include adjustable input compensation to accommodate a wide range of
signals and maintain consistent volume levels when switching
between sources.
DMPS-300-C DigitalMedia™ Presentation System 300
DMPS-300-C – Rear View
DigitalMedia 8G+™
Integrated DM 8G+ inputs and outputs afford the ultimate in simplicity,
providing a true one-wire interface for remote sources and display devices.
Easily add up to two DM 8G+ transmitters to provide connectivity for HD AV
sources and computers at a table or lectern. Connect two DM 8G+
receivers to provide independent signal routing and control for two
separate projectors or flat panel displays. Supporting wire lengths up to
330 feet (100 meters), DM 8G+ can also provide an ideal interface to
a central DigitalMedia switcher as part of a larger multi-room or roomcombining system.
DM 8G+ requires just one CAT5e wire run to each location, transporting
high-definition video, audio, and Ethernet for each device without
compromise. Power over DM (PoDM) is supplied over the same CAT5e
connection, providing a centralized power source for all compatible
transmitters and receivers.[2,3]
HDBaseT® Certified
Crestron DigitalMedia 8G+ technology is designed using HDBaseT Alliance
specifications, ensuring interoperability with third-party HDBaseT products.
Via DM 8G+, the DMPS-300-C can be connected directly to any HDBaseT
compliant source or display device without requiring a DM® transmitter or
receiver. The DMPS-300-C supports 5Play™, the feature set of HDBaseT
that converges uncompressed full HD digital video, audio, Ethernet,
power[3] and control signals through a single CAT5e or CAT6 cable over
distances up to 330 ft (100 m).
6-Channel Microphone Mixer
For a complete presentation or conferencing solution, the DMPS-300-C
includes built-in mixing and processing for six microphones. Each mic
input provides selectable mic or line level with 60 dB of gain adjustment,
switchable 48V phantom power, fully-adjustable gating, compression,
limiting, and 4-band EQ. Sophisticated matrix mixing allows for a
completely different stereo mix of all 6 microphones at each of the
DMPS-300-C’s seven outputs.
Professional Audio DSP
Each analog audio output on the DMPS-300-C includes its own digital
signal processor, allowing each output to be optimized to feed a power
crestron.com
| 800.237.2041
amplifier, codec, recorder, or assistive listening system. In addition to realtime adjustable volume, bass, treble, and mute controls, each DSP provides
10-band graphic equalization, 2-band parametric equalization, and 85 ms
speaker delay adjustment. Hardware relay muting on each output helps
prevent “thumping” on power up.
Built-in Amplifier
Its built-in 40-watt amplifier allows the DMPS-300-C to directly drive a
pair of stereo speakers, or a string of 70 or 100 Volt ceiling speakers. Fed
by the main “Program” output, the internal amplifier benefits fully from the
onboard DSP. For larger applications, Crestron AMP-Series power
amplifiers may be added, providing a complete solution for driving
separate program and speech speakers, or any multi-zone
loudspeaker system.
EDID Format Management
The DMPS-300-C allows for management of the EDID (Extended Display
Identification Data) information that passes between the display devices
and input sources in the system. Using Crestron Toolbox™ software, the
format and resolution capabilities of each device can be assessed,
allowing the installer to configure EDID signals appropriately for the most
desirable and predictable behavior.
A Scaler for Every Display
Through a distributed scaler approach, the DMPS-300-C affords a very
flexible and user-friendly solution for handling multiple disparate display
devices. Employing discrete outboard scalers like the HD-SCALER[4] and
DM-RMC-SCALER-C[4], the DMPS-300-C allows an independent highperformance scaler to be installed at every display device, ensuring an
optimal image on every screen no matter what sources are selected.
QuickSwitch HD® Technology
Handling high-definition digital media means handling HDCP (Highbandwidth Digital Content Protection), the encryption scheme used by
content providers to protect their DVDs, Blu-ray discs, and broadcast
signals against unauthorized copying. Viewing HDCP encrypted content
requires a source device to “authenticate” each display and signal
processor in the system and issue it a “key” before delivering an
output signal.
DMPS-300-C DigitalMedia™ Presentation System 300
Using a conventional HDMI or DVI switcher, it is common to experience
a complete loss of signal for up to 15 seconds during the authentication
process each time a new source or display is selected anywhere in the
system. Also, every source device has a limited number of keys available,
so connect too many displays and the source will simply stop outputting a
signal without warning.
Crestron QuickSwitch HD manages the keys for every HDCP-compliant
device in the system, maintaining continuous authentication for each
device to ensure fast, reliable routing of any source to any number of
display devices.
Auto-Locking™ Technology
Crestron Auto-Locking Technology enables super fast signal switching by
instantaneously configuring every device in the signal path, including DM
transmitters, DM receivers, and scalers, as soon as the signal hits the first
device. Whether switching between sources or TV channels, Auto-Locking
significantly reduces the time it takes each device to sense the new signal
and configure itself to handle the changes, virtually eliminating any
noticeable gap while switching.
Built-in Ethernet Switch
In addition to transporting digital video and audio, the DigitalMedia 8G+
ports on the DMPS-300-C can also extend Ethernet out to each display
and source device, providing high-speed connectivity for each room device
that requires a LAN connection. Ethernet is also utilized internally by the
Crestron control bus to manage each transmitter and receiver and provide
device control.
Private Network Mode
To streamline its implementation on a corporate or university LAN, the
DMPS-300-C employs Private Network Mode to provide a single-point
connection for the complete system. Using Private Network Mode, the
DMPS-300-C requires just one IP address for the complete DM network,
plus one additional IP address for the built-in control processor.
Integrated Control System
Its built-in 2-Series control system enables the DMPS-300-C to provide
complete, customizable control of every AV device, as well as room
lighting, window shades, and projection screens, without requiring a
separate control processor. The DMPS-300-C supports the full line of
Crestron touch screens, keypads, and wireless remotes for a user
experience custom tailored to the specific requirements of each enduser. Support for Crestron control apps and Crestron Fusion® Enterprise
Management Software delivers the industry’s most powerful platform for
remotely controlling and managing multiple rooms using computers and
mobile devices.
CEC Embedded Device Control
The primary objective of every Crestron system is to enable precisely the
control desired for a seamless user experience. In addition to conventional
IR, RS-232, and Ethernet device control, the DMPS-300-C can provide an
additional alternative by harnessing the CEC (Consumer Electronics
Control) signal embedded in HDMI. The DMPS-300-C provides a gateway
for controlling many devices right through their HDMI (or HDBaseT)
connections, potentially eliminating the need for any dedicated control
wires or IR emitters. Through proper CEC signal management, the
crestron.com
| 800.237.2041
DMPS-300-C allows you to take control of each device as you like.
Easy Setup
Every step of the DMPS-300-C setup process is designed to be quick
and easy using its front panel or Crestron Toolbox software, configuring
inputs and outputs automatically while letting the installer make intelligent
design decisions along the way. Out of the box, the DMPS-300-C front
panel supports basic signal routing for easy testing and troubleshooting
during installation. The front panel label strips can be customized using
Crestron Engraver software or standard 3/8” tape labels, allowing for the
clear designation of each input and output. Inputs and outputs may also be
designated by name through the software to appear on the LCD display.
SPECIFICATIONS
Operating System
Crestron® 2-Series; real-time, preemptive, multi-threaded/multitasking
kernel; FAT32 file system with long names
Memory
SDRAM: 32 MB
NVRAM: 256 KB
Flash: 16 MB
Communications
Ethernet: 10/100/1000 Mpbs; auto-switching; auto-negotiating; autodiscovery; full/half duplex; TCP/IP; UDP/IP; CIP; DHCP; SSL; SNMP; IPv4;
RSTP; SMTP e-mail client; Web Server; installer setup via Crestron
Toolbox™
Cresnet: Cresnet® master mode
DigitalMedia: DM 8G+™, HDCP, EDID, CEC, PoDM , HDBaseT® compliant
HDMI: HDMI®, HDCP, EDID, CEC
USB: USB service port for computer console, USB HID signal routing
over DM
RS-232: 2-way device control and monitoring up to 115.2k baud with
hardware and software handshaking
IR/Serial: 1-way device control via infrared up to 1.2 MHz or serial TTL/
RS-232 (0-5 Volts) up to 115.2k baud; supports CNXRMIRD IR Receiver[4]
Ethernet Switch
8-port switch with Private Network Mode; provides (1) rear panel
10/100/1000Base-T Gigabit Ethernet port and (7) internal
10Base-T/100Base-TX Ethernet ports for the control processor, switcher,
audio DSP, and DM ports
Video
Switcher: Auto-detecting multi-format digital/analog source inputs, 7x4
matrix switcher, HDMI and DM 8G+ outputs, QuickSwitch HD® technology
Input Signal Types: HDMI (Inputs 1-5), RGB[5] (Inputs 3-5), composite/
S-Video/component (Input 5), DM 8G+ and HDBaseT (Inputs 6 & 7)
Output Signal Types: HDMI (Outputs 1 & 2), DM 8G+ and HDBaseT
(Outputs 3 & 4)
DMPS-300-C DigitalMedia™ Presentation System 300
Formats: HDMI w/Deep Color & 3D[6], DVI[1], DisplayPort Multimode[1],
HDCP content protection support, HD up to 1080i/1080p, computer up to
UXGA/WUXGA, RGBHV, RGBS, RGSB, YPbPr, Y/C, NTSC, PAL
Input Resolutions, HDMI & HDBaseT, Progressive: 640x480@60Hz,
720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz,
848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz,
1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50),
1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz,
1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz,
1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz,
1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz,
1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz
(1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60),
1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other
resolution allowed by HDMI up to 165MHz pixel clock
Input Resolutions, HDMI & HDBaseT, Interlaced: 720x480@30Hz (480i),
720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz
(1080i30), plus any other resolution allowed by HDMI up to 165MHz
pixel clock
Input Resolutions, RGB: 640x480@60Hz, 720x480@60Hz
(480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz,
1024x768@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60),
1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz,
1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz,
1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@50Hz (1080p50),
1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1152@60Hz
Input Resolutions, Component: 480i, 576i, 480p, 576p, 720p50, 720p60,
1080p24, 1080i25 (1125 lines), 1080i30, 1080p30, 1080p50 (1125 lines),
1080p60
Input Resolutions, Composite and S-Video: 480i, 576i
Output Resolutions: Matched to inputs
Analog-To-Digital Conversion: 10-bit 165 MHz per each of 3 channels
RGB Source Image Adjustments:
Brightness: 0% to 50%
Contrast: -50% to +50%
Fine Phase: -16 to *15
X Position: -100 to +100
Y Position: -10 to +10
RGB Gains: -50 to +50, separately adjustable for Red, Green, and Blue
YPbPr, Y/C, or Composite Source Image Adjustments:
Brightness: 0% to 50%
Contrast: -50% to +50%
Saturation: -50% to +50%
Hue: -50% to +50%
Audio
Switcher/Mixer: 6-channel gated mic mixer w/DSP, auto-detecting
multi-format digital/analog source inputs, DigitalMedia 8G+ inputs
(HDBaseT compatible), 7x7 stereo source switcher, 7x4 multi-channel
source switcher, analog and HDMI outputs, DM 8G+ outputs (HDBaseT
compatible), independent 6-ch mic + source mixer per output,
independent stereo DSP per analog output, integrated power amplifier,
digital audio pass-through mode
crestron.com
| 800.237.2041
Typical of 6 microphone input channels:
Input Signal Types: Mono analog mic or line level
Analog-To-Digital Conversion: 24-bit 48 kHz
Phantom Power: Enable/Disable per channel
Gain: 0 to +60 dB Gain adjustment, plus Mute
Delay: 0.0 to 85.3 ms
EQ Center Frequencies: 160, 500, 1.2k, 3k Hz
EQ Gain: ±12.0 dB per band
Gating Level (Threshold): -80 to 0 dB
Gating Depth (Attenuation): -80 to 0 dB
Gating Attack: 1 to 250 ms
Gating Decay (Release): 1 to 1000 ms
Compression Level (Threshold): -80 to 0 dB
Compression Ratio: 1:1 to 10:1
Compression Attack: 1 to 250 ms
Compression Release: 1 to 1000 ms
Compression Curve: Hard or soft knee
Limiting Level (Threshold): -80 to 0 dB
Limiting Attack: 1 to 250 ms
Limiting Release: 1 to 1000 ms
Limiting Curve: Hard or soft knee
Typical of 7 source input channels:
Input Signal Types: HDMI or DisplayPort Multimode[1] (Inputs 1-5),
analog 2-channel (Inputs 1-5), S/PDIF (Input 5), DM 8G+/HDBaseT
(Inputs 6 & 7)
Formats, Analog: Stereo 2-Channel
Formats, HDMI & DM: Dolby Digital®, Dolby Digital EX, DTS®, DTS-ES,
DTS 96/24, up to 8ch PCM
Formats, SPDIF: 2ch PCM
Analog-To-Digital Conversion: 24-bit 48 kHz
Input Compensation: ±10.0 dB
Typical of 3 analog line outputs w/DSP:
Output Signal Type/Format: Stereo 2-Channel
Digital-To-Analog Conversion: 24-bit 48 kHz
Mic 1 – 6: -80 to +10 dB Level adjustment range, plus Mute and Pan
Mics Master: -80 to +10 dB Level adjustment range, plus Mute
Left/Right (Source): -80 to +10 dB Level adjustment range, separately
adjustable for Left and Right, plus Mute
Master Volume: -80 to +10 dB Level adjustment range, plus Mute
Mixer Presets: 1 thru 5
Bass: ±12.0 dB
Treble: ±12.0 dB
Equalization: 10-band graphic + 2-band parametric
GEQ Center Frequencies: 31.5, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k
Hz
GEQ Gain: ±12.0 dB per band
GEQ Presets: 1 thru 10
PEQ Center Frequencies: 5 to 24000 Hz per band
PEQ Gain: -36.0 to +24.0 dB per band
PEQ Bandwidth: 0.02 to 3.50 octaves per band
PEQ Types: Peaking EQ, High Pass, Low Pass, High Shelf, Low Shelf,
Notch
DMPS-300-C DigitalMedia™ Presentation System 300
PEQ Presets: 1 thru 5
Delay: 0.0 to 85.3 ms
Frequency Response: 20Hz to 20kHz ±0.5 dB (digital source);
20Hz to 20kHz ±0.5 dB (analog line source);
20Hz to 20kHz ±0.7 dB (microphone source)
S/N Ratio: >108 dB (digital source), 1 kHz, A-weighted;
>103 dB (analog line source), 1 kHz, A-weighted
THD+N: <0.002% (digital source), 20 Hz to 20 kHz;
<0.005% (analog line source), 20 Hz to 20 kHz;
<0.05% (microphone source), 20 Hz to 20 kHz
Stereo Separation: >108 dB (digital source);
>103 dB (analog source)
Channel Separation: >103 dB
Typical of 4 HDMI & DM outputs:
Output Signal Types: HDMI (Outputs 1 & 2), DM 8G+ and HDBaseT
(Outputs 3 & 4)
Formats: Dolby Digital, Dolby Digital EX, DTS, DTS-ES, DTS 96/24, up to
8ch PCM
Mic 1 – 6: -80 to +10 dB Level adjustment range, plus Mute and Pan[7]
Mics Master: -80 to +10 dB Level adjustment range, plus Mute[7]
Left/Right (Source): -80 to +10 dB Level adjustment range, separately
adjustable for Left and Right, plus Mute[7]
Master Volume: -80 to +10 dB Level adjustment range, plus Mute[7]
Mixer Presets: 1 thru 5
Frequency Response: 20Hz to 20kHz ±0.5 dB (digital source);
20Hz to 20kHz ±0.5 dB (analog line source);
20Hz to 20kHz ±0.7 dB (microphone source)
S/N Ratio: >108 dB (digital source), 1kHz, A-weighted;
>103 dB (analog line source), 1kHz, A-weighted
THD+N: <0.002% (digital source), 20 Hz to 20 kHz;
<0.005% (analog line source), 20 Hz to 20 kHz;
<0.05% (microphone source), 20 Hz to 20 kHz
Stereo Separation: >108 dB (digital source);
>103 dB (analog source)
Channel Separation: >108 dB (digital source);
>103 dB (analog source)
Stereo Amplified Output (same signal as Program output):
Output Power, 4/8 Ω: 20 Watts RMS per channel at 8 Ohms, 4 Ohms
tolerant
Output Power, 70/100V: 40 Watts RMS
Frequency Response: 20 Hz to 20 kHz ±1 dB @ 20 Watts into 8 Ohms;
100 Hz to 20 kHz ±2.5 dB @ 70 or 100 Volts
S/N Ratio: 98 dB @ 20 Watts into 8 Ohms, 1 kHz, A-weighted;
96 dB @ 20 Watts in 4 Ohms, 1 kHz, A-weighted
THD+N: <0.1% (1 kHz), <0.7% (20 Hz to 20 kHz), @ 20 Watts into 4 or
8 Ohms
Stereo Separation: >65 dB @ 20 Watts, 1 kHz
Connectors – Audio/Video Inputs
HDMI INPUT 1 – 5: (5) 19-pin Type A HDMI female, digital video/audio
inputs;
Signal Types: HDMI, DVI, or DisplayPort Multimode[1,6]
crestron.com
| 800.237.2041
RGB INPUT 3 – 5: (3) DB15HD female, analog RGB/video inputs;
Signal Types: RGBHV, component, S-Video, or composite[5];
Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC or PAL;
Input Level: 0.5 to 1.5 Vp-p with built-in DC restoration;
Input Impedance: 75 Ohms nominal;
Sync Detection: RGBHV, RGBS, RGsB, YPbPr;
Sync Input Level: 3 to 5 Vp-p;
Sync Input Impedance: 2.2k Ohms;
Note: RGB Inputs 3-5 and HDMI Inputs 3-5 are mutually exclusive; HDMI
overrides RGB when using the auto-switching feature
Y, PB/Y, PR/C/COMP INPUT 5: (3) BNC female comprising (1) auto-sensing
multi-format analog video input;
Signal Types: Component, S-Video, or composite;
Formats: YPbPr, Y/C, NTSC or PAL;
Input Level: 1 Vp-p nominal;
Input Impedance: 75 Ohms nominal;
Note: Video Input 5, RGB Input 5, and HDMI Input 5 are mutually exclusive;
HDMI and RGB override Video when using the auto-switching feature
SPDIF INPUT 5: (1) RCA female, S/PDIF coaxial digital audio input;
Input Impedance: 75 Ohms;
Note: SPDIF Input 5 and HDMI Input 5 are mutually exclusive; HDMI
overrides SPDIF when using the auto-switching feature
AUD IN 1 – 5: (5) 5-pin 3.5mm detachable terminal blocks;
Balanced/unbalanced stereo line-level analog audio inputs;
Input Impedance: 24k Ohms balanced/unbalanced;
Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced;
Note: Analog Audio Inputs 1-5, SPDIF Input 5, and HDMI Inputs 1-5 are
mutually exclusive; HDMI and SPDIF override Analog Audio when using the
auto-switching feature
DM INPUT 6 – 7: (2) 8-pin RJ45 female, shielded;
DM 8G+ inputs, HDBaseT compliant;
PoDM and PoH PSE (Power Sourcing Equipment) ports[3];
Connect to DM 8G+ outputs of DM transmitters or other DM devices, or to
HDBaseT devices, via CAT5e or Crestron DM-CBL-8G cable[2]
MC1/LN1 – MC6/LN6: (6) 5-pin 3.5mm detachable terminal blocks;
Comprises (6) balanced microphone/line audio inputs;
Balanced Mic Input Level: -60 to 0 dBV, 1 Vrms maximum;
Balanced Line Input Level: -31 to +11 dBV, 3.7 Vrms maximum;
Unbalanced Line Input Level: -37 to +5 dBV, 1.85 Vrms maximum;
Mic Input Impedance: 3.9k Ohms balanced;
Line Input Impedance: 19k Ohms balanced, 9.5k Ohms unbalanced;
Phantom Power: 48 Volts DC, software enabled/disabled per channel
Connectors – Audio/Video Outputs
SPEAKER OUTPUT 4Ω/8Ω L – R: (2) 2-pin 7.62mm 15A detachable
terminal blocks;
4-8 Ohm stereo speaker-level audio output;
Wire Size: Terminals accept up to 14 AWG;
Output Power: 20W RMS per channel stereo at 8 Ohms, 4 Ohms tolerant
DMPS-300-C DigitalMedia™ Presentation System 300
SPEAKER OUTPUT 70/100V: (1) 2-pin 7.62mm 15A detachable
terminal block;
Transformer-isolated 70 or 100 Volt mono speaker-level audio output;
Wire Size: Terminals accept up to 14 AWG;
Output Power: 40W RMS mono at 70 or 100 Volts;
Note: 4Ω/8Ω and 70/100V outputs are mutually exclusive
PROG OUT: (1) 5-pin 3.5mm detachable terminal block;
Balanced/unbalanced stereo line-level audio output;
Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;
Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
AUX OUT 1 – 2: (2) 5-pin 3.5mm detachable terminal blocks;
Balanced/unbalanced stereo line-level audio outputs;
Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;
Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
HDMI OUTPUT 1 – 2: (2) 19-pin Type A HDMI female, digital video/audio
outputs;
Signal Types: HDMI, DVI[1]
DM OUTPUT 3 – 4: (2) 8-pin RJ45 female, shielded;
DM 8G+ outputs, HDBaseT compliant;
PoDM and PoH PSE (Power Sourcing Equipment) ports[3];
Connect to DM 8G+ inputs of DM receivers/room controllers or other DM
devices, or to HDBaseT devices, via CAT5e or Crestron DM-CBL-8G cable[2]
Connectors - Control & Power
IR/SERIAL OUT 1 – 4: (4) 2-pin 3.5mm detachable terminal blocks;
IR/Serial output ports;
IR output up to 1.2 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
IR IN: (1) 3-pin 3.5mm detachable terminal block
For connection of the CNXRMIRD IR Receiver[4];
Allows control from IR wireless remotes using RC-5 command set
INPUT 1 – 4: (1) 5-pin 3.5mm detachable terminal block;
Comprises (4) programmable digital inputs;
Input Voltage Range: 0 to 24 Volts DC, referenced to GND;
Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band;
Input Impedance: 10k Ohms at >5 Volts, 1M Ohms at <5 Volts;
Pull-up Resistor: 2.2k Ohms per input
RELAY 1 – 4: (1) 8-pin 3.5mm detachable terminal block;
Comprises (4) normally open, isolated relays;
Rated 1 Amp, 30 Volts AC/DC;
MOV arc suppression across contacts
COM A – B: (2) DB9 male, bidirectional RS-232 ports;
Up to 115.2k baud, hardware and software handshaking support
NET: (4) 4-pin 3.5mm detachable terminal blocks;
Cresnet Master ports, paralleled;
Available Cresnet Power: 30 Watts
SERVICE: (1) USB Type B female, for factory use only
crestron.com
| 800.237.2041
PoDM 48VDC IN: (1) 4-pin snap & lock power jack;
48 Volt DC power input for PoDM power pack[3];
Enables PoDM and PoH power sourcing
100-240V~4.0A 50/60Hz: (1) IEC 60320 C14 main power inlet;
Mates with removable power cord, included
G: (1) 6-32 screw, chassis ground lug
LAN: (1) 8-wire RJ45 female;
10Base-T/100Base-TX/1000Base-T Ethernet port
COMPUTER (front): (1) USB Type B female;
USB computer console port (cable included)
LCD Display
Green LCD alphanumeric, adjustable backlight, 2 lines x 20 characters per
line; displays input/outputs by name, volume levels, setup menus, signal
routing, device info, and other system information
Controls & Indicators
NET: (1) yellow LED, indicates Cresnet bus activity
LAN: (1) yellow LED, indicates Ethernet activity
HW-R: (1) recessed miniature pushbutton for hardware reset, reboots the
control system
SW-R: (1) recessed miniature pushbutton for software reset, restarts the
SIMPL program
POWER: (1) pushbutton and green LED, programmable for system power
control
SOFTKEYS: (4) pushbuttons for activation of LCD driven functions and
passcode entry
MENU: (1) pushbutton, steps menu back one level
, ‚: (2) pushbuttons, scroll up or down through menu and adjust menu
parameters
ENTER: (1) pushbutton, executes highlighted menu or value
VOLUME: (1) continuous turn rotary encoder, adjusts menu parameters,
defaults to Program audio volume
MUTE: (1) pushbutton and red LED, mutes the Program audio output
ROUTE: (1) pushbutton and red LED, selects ROUTE mode to allow routing
changes
VIEW: (1) pushbutton and red LED, selects VIEW mode to view current
routing
INFO: (1) pushbutton and red LED, selects INFO mode to view AV and
device info
INPUTS 1 – 7: (7) pushbuttons and red LEDs, select input to be routed
OUTPUTS 1 – 4, PROG, AUX 1 – 2: (7) pushbuttons and red LEDs, select
output destination(s)
SPEAKER OUTPUTS: (1) 3-position slide switch, selects the amplifier
output configuration
DM INPUT 6 – 7 (rear): (4) LEDs, green LEDs indicate DM link status,
amber LEDs indicate video and HDCP signal presence, for each respective
port
DM INPUT 6 – 7 PoDM (rear): (2) green LEDs, indicate upstream device is
drawing power over DM for each respective port
DMPS-300-C DigitalMedia™ Presentation System 300
DM OUTPUT 3 – 4 (rear): (4) LEDs, green LEDs indicate DM link status,
amber LEDs indicate video and HDCP signal presence, for each respective
port
DM OUTPUT 3 – 4 PoDM (rear): (2) green LEDs, indicate downstream
device is drawing power over DM for each respective port
LAN (rear): (2) LEDs, bi-color LED (left) indicates Ethernet speed and
activity, green LED (right) indicates Ethernet link status
Power Requirements
Main Power: 4 Amps @ 100-240 Volts AC, 50/60 Hz
Available Cresnet Power: 30 Watts
Power over DM (PoDM): PoDM PSE (Power Sourcing Equipment), supplies
power to PoDM Powered Devices[3]
Power over HDBaseT (PoH): PoH PSE (Power Sourcing Equipment),
supplies power to PoH Powered Devices[3]
PoDM Power Pack: 1.875 Amp @ 48 Volts (100-240 Volts AC, 50/60 Hz
power pack, model PW-4818DU sold separately)
Environmental
Temperature: 41° to 104°F (5° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Heat Dissipation: 277 BTU/hr
Enclosure
Chassis: Metal, black finish, fan-cooled, vented sides
Front Panel: Metal, black finish with polycarbonate label overlay
Mounting: Freestanding or 3U 19-inch rack-mountable (adhesive feet and
rack ears included)
Dimensions
Height: 5.20 in (133 mm) without feet
Width: 17.28 in (439 mm);
19.00 in (483 mm) with rack ears
Depth: 16.31 in (415 mm)
Weight
22 lb (9.9 kg)
MODELS & ACCESSORIES
Available Models
DMPS-300-C: DigitalMedia™ Presentation System 300
Available Accessories
AM-100: AirMedia™ Presentation Gateway
PW-4818DU: 90W PoDM Power Pack for DMPS
HD-TX3-C: HDMI® over HDBaseT® Transmitter
DM-TX-200-C-2G: Wall Plate DigitalMedia 8G+™ Transmitter 200
DM-TX-201-C: DigitalMedia 8G+™ Transmitter 201
DM-TX-401-C: DigitalMedia 8G+™ Transmitter 401
crestron.com
| 800.237.2041
HD-SCALER: High-Definition Video Scaler
HD-RX3-C: HDMI® over HDBaseT® Receiver
DM-RMC-SCALER-C: DigitalMedia 8G+™ Receiver & Room Controller
w/Scaler
DM-RMC-100-C: DigitalMedia 8G+™ Receiver & Room Controller 100
DM-RMC-200-C: DigitalMedia 8G+™ Receiver & Room Controller 200
AMP-2210S: 2x210W Commercial Power Amplifier, 4/8Ω
AMP-3210S: 3x210W Commercial Power Amplifier, 4/8Ω
AMP-2210T: 2x210W Commercial Power Amplifier, 4/8Ω or 70/100V
AMP-3210T: 3x210W Commercial Power Amplifier, 4/8Ω or 70/100V
AMP-2210HT: 2x210W Commercial Power Amplifier, 4/8Ω or
High-Power 70V
Crestron® App: Control App for Apple® iOS®
Crestron Mobile Pro®: Control App for iPhone®, iPad® and Android™
Devices
Crestron® App for Samsung Smart TV®: Control App for Samsung
Smart TV
XPanel: Crestron Control® for Computers
Fusion EM®: Energy Management Software
Fusion RV®: Remote Asset Management Software
RoomView® Express: Remote Help Desk and Resource Management
Software
CSP-LIR-USB: IR Learner
CNSP-XX: Custom Serial Interface Cable
IRP2: IR Emitter Probe w/Terminal Block Connector
CNXRMIRD: IR Receiver
DM-CBL-8G-NP: DigitalMedia 8G™ Cable, non-plenum
DM-CBL-8G-P: DigitalMedia 8G™ Cable, plenum
DM-8G-CONN: DigitalMedia 8G™ Cable Connector
DM-8G-CRIMP: Crimping Tool for DM-8G-CONN
DM-8G-CONN-WG: DigitalMedia 8G™ Cable Connector with Wire Guide
DM-8G-CRIMP-WG: Crimping Tool for DM-8G-CONN-WG
CRESNET-NP: Cresnet® Control Cable, non-plenum
CRESNET-P: Cresnet® Control Cable, plenum
CRESNET-HP-NP: Cresnet® “High-Power” Control Cable, non-plenum
CBL Series: Crestron® Certified Interface Cables
MP-WP Series: Media Presentation Wall Plates
MPI-WP Series: Media Presentation Wall Plates - International Version
USB-EXT-DM: USB Extenders
Notes:
1. HDMI requires an appropriate adapter or interface cable to accommodate a DVI or DisplayPort
Multimode signal. CBL-HD-DVI interface cables available separately.
2. For DM 8G+ or HDBaseT wiring, use Crestron DM-CBL-8G DigitalMedia 8G Cable, Crestron
DM-CBL DigitalMedia Cable, Crestron DM-CBL-D DigitalMedia D Cable, or third-party CAT5e
(or better) UTP or STP. Maximum wire length for DM 8G+ is 330 ft (100 m) between devices.
Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to
the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines.
DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT
compliant equipment. All wire and cables sold separately.
3. Supplying Power over DM (PoDM) or Power over HDBaseT (PoH) requires external power pack,
model PW-4818DU, sold separately.
4. Item(s) sold separately.
5. The RGB inputs can accept component, composite, and S-Video signals via direct interface
to Crestron MPS Series products, or through an appropriate adapter (not included). Input sync
DMPS-300-C DigitalMedia™ Presentation System 300
detection is not provided for composite or S-Video signal types through the RGB connection.
6. Deep Color and 3D video signals are only supported via HDMI inputs 1 and 2, and DM inputs
6 and 7.
7. When a digital audio input (HDMI, DM, or SPDIF) is routed to an HDMI or DM output, that
output is put in “pass-through” mode so that the digital input is the only signal that passes to
that output and the audio controls on that output have no effect.
This product may be purchased from an authorized Crestron dealer. To find a dealer, please
contact the Crestron sales representative for your area. A list of sales representatives is available
online at www.crestron.com/salesreps or by calling 800-237-2041.
The specific patents that cover Crestron products are listed online at: patents.crestron.com.
Crestron, the Crestron logo, AirMedia, Auto-Locking, Cresnet, Crestron Control, Crestron Fusion,
Crestron Mobile Pro, Crestron Toolbox, DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM,
DM 8G+, Fusion EM, Fusion RV, QuickSwitch HD, RoomView, and Smart Graphics are either
trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other
|
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400
www.crestron.com
| Fax: 201.767.1903
countries. Apple, iPad, and iPhone are either trademarks or registered trademarks of Apple Inc.
in the United States and/or other countries. IOS is either a trademark or registered trademark
of Cisco Technology, Inc. in the United States and/or other countries. Dolby and Dolby Digital
are either trademarks or registered trademarks of Dolby Laboratories in the United States and/
or other countries. DTS is either a trademark or registered trademark of DTS, Inc. in the United
States and/or other countries. Android is either a trademark or registered trademark of Google
Inc. in the United States and/or other countries. HDBaseT, 5Play, and the HDBaseT Alliance logo
are either trademarks or registered trademarks of the HDBaseT Alliance in the United States and/
or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of
HDMI Licensing LLC in the United States and/or other countries. Samsung Smart TV is either a
trademark or registered trademark of Samsung Electronics Co., Ltd. In the United Stated and/or
other countries. Other trademarks, registered trademarks, and trade names may be used in this
document to refer to either the entities claiming the marks and names or their products. Crestron
disclaims any proprietary interest in the marks and names of others. Crestron is not responsible
for errors in typography or photography. Specifications are subject to change without notice.
©2014 Crestron Electronics, Inc.
All brand names, product names and trademarks are the property of their respective owners.
©2014 Crestron Electronics, Inc.
Specifications subject to change without notice. Revised 04/14/14
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising