Aplex ADP-1156 User manual

Aplex ADP-1156 User manual
ADP-1156 Display Monitor
User Manual
Release Date
Revision
June 2007
®2005 Aplex Technology, Inc.
V1.0
All Rights Reserved.
Published in Taiwan
Aplex Technology, Inc.
9F-5, No. 2, Jian Pa Road, Chung Ho City, Taipei County, Taiwan
Tel: 886-2-82262881
Fax: 886-2-82262883
E-mail: [email protected] URL: www.aplex.com.tw
ADP-1156 User Manual
1
Warning!___________________________________
This equipment generates, uses and can radiate radio frequency energy and if not installed and
used in accordance with the instructions manual. It may cause interference to radio communications.
It has been tested and found to comply with the limits for a Class A computing device pursuant to
FCC Rules, which are designed to provide reasonable protection against such interference when
operated in a commercial environment. Operation of this equipment in a residential area is likely
to cause interference in which case the user at his own expense will be required to take whatever
measures may be required to correct the interference.
Electric Shock Hazard – Do not operate the machine with its back cover removed. There are
dangerous high voltages inside.
Disclaimer
This information in this document is subject to change without notice. In no event shall Aplex Technology
Inc. be liable for damages of any kind, whether incidental or consequential, arising from either the use or
misuse of information in this document or in any related materials.
ADP-1156 User Manual
2
Table of Contents______________________
Warning!…………………………………………………………………………….……..….2
Disclaimer………………………………………………………………….…………………2
Chapter 1
Getting Started
1.1 Features………………………………………………………….…..…..…4
1.2 Specifications…………………………………………. ...……………...….4
1.3 Dimensions…………………………………...………………………….…6
1.4 Brief Description...................................................................................7
1.5 Display Mode……………………………………………………………….8
Chapter 2
2.1
2.2
2.3
2.4
OSD
Front Panel Controls………….………………………………….…..…….9
OSD Controls………………………………………………………………..9
Main Menu…..……………………………………………………………..10
AD Board (TB-6020) OSD Functions……………………………………12
Figures
Figure 1.1: Dimensions of ADP-1156..…………..…………..……………..6
Figure 1.2: Front View…..….………………………………………………….7
Figure 1.3: Rear View…………………..……………………………………...8
ADP-1156 User Manual
3
Chapter 1_____________________________
1.1 Features
●
●
●
●
●
●
15” TFT XGA LCD with luminance of 400 cd/m²
Five edges panel NEMA 4/IP 65 rated
Resistive touch screen (optional)
VESA mount
VGA Input, with optional DVI, Video or S-Video input
Supports wide-ranging resolutions from 640x480 to up to 1600x1200
with auto phase and auto position
1.2 Specifications
Display
●
●
●
●
●
Display: 15” color active TFT flat panel display
Maximum resolution: 1024 x 768 (native mode)
Maximum colors: 16.2M
Luminance: 400 cd/m²
Viewing angle: 140°(H), 125°(V) for ADP-1156
● Backlight life: CCFL 2 tubes 10,000 hrs
● OSD controls/indicators: automatic screen, setup (OSD), brightness,
contrast, horizontal/vertical position, image lock, color balance,
video information, power on and sync detection
● Touch screen: resistive antiglare
● OS compatibility: Win 95/98, XP, 2000, NT4.0, QNX, Linux
● Power Input: 12V DC, 11~28V/DC (Optional)
Mechanical
●
●
●
●
●
Construction: stainless steel chassis
Mounting VESA mount
OSD on the rear side
Dimensions: 398(W) x 316(H) x 53mm (D)
Weight: 6.0 kg
ADP-1156 User Manual
4
Environmental
●
●
●
●
●
●
Operating temperature: 0 to 50℃ (32 to 122℉)
Storage temperature: -20 to 60℃ (-4 to 140℉)
Relative humidity: 10 to 95% @40℃, non-condensing, without touch screen
Vibration: 1G peak, 5~500Hz (at random)
Shock: 15G peak acceleration (11 msec.duration)
EMC: CE, FCC Class A
Ordering Information
ADP-1156
15” industrial display monitor (stainless steel bezel & rear OSD)
ADP-1156T
15” industrial display monitor (stainless steel bezel & rear OSD) with
resistive touch screen
ADP-1156 User Manual
5
1.3 Dimensions
Figure 1.1: Dimensions of the ADP-1156
ADP-1156 User Manual
6
1.4 Brief Description of the ADP-1156
The ADP-1156 features an excellent viewing ability for monitoring and control applications. It is
available with resistive touch screen that is easy to use and maintain.
The front panel of the display monitor is sealed with gasket for NEMA 4/IP 65 rating when it is
panel-mounted in a NEMA rated cabinet or enclosure.
Figure 1.2: Front View of the ADP-1156
Figure 1.3: Rear View of the ADP-1156
ADP-1156 User Manual
7
1.5 Display Mode
Display Mode
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
1152 x 864
SXGA
1280 x 1024
ADP-1156 User Manual
Hori. Sync (KHz)
Vert. Sync. (Hz)
31
60
38
72
38
75
35
56
38
60
48
72
47
75
48
60
56
70
60
75
68
75
64
60
80
75
8
Chapter 2_____________________________
2.1 On Screen Display Controls
Power switch: To turn ON or OFF the power
Shift the icon to the right side or shift it up
Shift the icon to the left side or shift it down
Menu: To enter OSD menu for related icon and item.
Auto Button: One-touch auto adjustment
2.2 OSD Controls
To make any adjustment, select the following:
1. Press
(Menu) to show the OSD menu or disable the OSD menu.
2. Select the icon that you wish to adjust with the (
/
or +/-) key in the menu.
3. Press
(Menu) and then choose the item with the (
4. Press
(Menu) and then adjust the quality with the (
ADP-1156 User Manual
or +/-) key.
/
/
or +/-) key.
9
2.3 Main Menu
In the Main menu, there are the following items:
z Color
z Image Setting
z Position
z OSD Menu
z Language
z Misc
z Exit
For Color, check out the following:
z Contrast
z Brightness
z Color Adjust
z Color Temp
z Back
For Image setting, check out the following:
z Clock
z Phase
z Gamma
z Sharpness
z Back
In the Position, there are the following:
z H. Position
z V. Position
z Back
ADP-1156 User Manual
10
In the OSD menu, there are:
z
z
z
z
OSD H. Pos.
OSD V. Pos.
OSD Timer
Back
In the Language menu, there are:
z English
z Frances
z Germany
z
z
z
z
Spanish
Traditional Chinese
Simplified Chinese
Japanese
In the Misc menu, there are:
z Signal Source
Select VGA: Analogue VGA Input
Select DVI: Digital DVI-D Input
Select AV: Composite Video Input
Select SV: S-Video Video Input
z Reset
z Back
ADP-1156 User Manual
11
2.4 AD Board (TB-6020) OSD Functions
1.) Getting into Burn-in Mode
Before setting into a burn-in mode, first disconnect the AC power cord. Then press (don’t let them go)
the
buttons until the AC power cord is connected and the “RGB” appears on the top left corner
of your screen. Now it can be put into the burn-in mode for changing colors.
2.) Getting Out of Burn-in Mode
Before getting out of the burn-in mode, please first disconnect the AC power cord. Then press the
button (If not workable, press the
button and don’t let them go) until the AC power cord is
connected. Please don’t let your fingers go until the AC power cord is connected again and the
wording of “RGB” appears on the top left corner of your screen, and wait for 3 second. Under the
non-signal entry situation, if Cable Not Connected
is seen, exit is thus successfully made.
When the Burn-in Mode is Unable to Eradicate…
1.)
If the “RGB” is still on the top left corner of the screen, press
choose “Reset”, and then Yes, and press
to enter “Miscellaneous” and
. When the screen goes black, disconnect power and
repeat the above steps.
buttons
2.)
If the “RGB” is not found, disconnect the AC power cord first. Then press the
3.)
(don’t let them go) until the AC power cord is connected, and wait for 2 to 3 seconds. When
“RGB” appears, repeat the above steps.
Functions of OSD Keys
Auto Adjust
Up/Left Down/Right Power
Menu/Entry
ADP-1156 User Manual
Power Indicator
12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement