Centsys VECTOR2 User manual

Centsys VECTOR2 User manual
Swings
gates
precisely!
The VECTOR2 automation system is the all-round winner for swing gates.
Its linear operating principle with internal position control makes the system
quick and easy to install. The revolutionary mechanical design ensures a swift,
powerful and reliable operator for the majority of domestic and light-industrial
gates.
The low voltage motor provides safe operation and battery backup.
The advanced controller is feature-rich and the setup and commissioning is
child’s play.
Low profile in-line design
The VECTOR2 has a low profile design with in-line construction of the motor, gearbox and
actuating piston. This enhances the aesthetic appearance of the operator allowing it to blend in as
unobtrusively as possible with the design of the gate.
Easy to install
The fully integrated linear action operator with no complicated linkages makes the installation of the
system very quick and easy. Added to this, the internal position control mechanism simplifies the
installation even further, as the gates no longer require end-of-travel endstops .
Combined with different optional mounting bracket kits, the VECTOR2 can be fitted to almost any
swing gate pillar.
Currently inward swinging gates only
High push force
The high-torque DC motor operating through an efficient planetary gearbox, delivers a potent
250kg push force. The VECTOR2 is capable of reliably operating swing gates in the majority of
domestic and light-industrial applications.
Revolutionary brake
The revolutionary centrifugal brake developed for the VECTOR2 ensures secure locking of the
operator when the gate is both open and closed.
one sixth of CENTURION height
Internal limits
The VECTOR2 double-redundant opto-electronic internal limit system guarantees very reliable
operation and precise control of the movement of the gate.
Complete speed control
The VECTOR2 electronics, with ‘Quadra-Drive’ speed control, maintains smooth and quiet
starting and stopping of the gate regardless of its condition and ambient temperatures, even
after many years of service. This state of the art control reduces the operating stresses and
extends the life of both the operator and the gate.
Swift operation
The mechanical gearing of the VECTOR2, combined with its leading-edge speed system
maintains rapid and precisely controlled opening and closing of the gate for greater convenience
and security.
Safe battery backup
With only a low-voltage battery supply powering the VECTOR2 operator, the system is totally safe
from risks such as electrocution, and has the added benefit of providing power-failure protection.
The added efficiency of the operator results in an exceptional number of uses, even off a low
capacity battery in the event of a power failure.
Sensitive anti-crushing control
The VECTOR2 controller accurately monitors any obstructions to the movement of the gate and
ensures ultra-safe operation against crushing and end-user peace of mind.
All-weather construction
All external components of the operator are manufactured from a combination of stainless steel,
epoxy-coated coastal-grade aluminium and UV-stabilised engineering polymers.
This guarantees a robust and durable unit in both inland and coastal environments.
Easy to use
The VECTOR2 controller, combined with its Liquid Crystal Display (LCD), provides a very intuitive
and easy to use menu system for setting up the end-of-travel limits and all features available on the
system.
Offering an extensive range of useful features, the controller is exceptionally versatile and has the
ability to adapt the system to suit the requirements of almost every user.
Operate wirelessly
Besides its ultra-secure code-hopping technology offering the highest level remote control security,
this CENTSYS onboard receiver is both multichannel and multi-user. It allows for multi-button remote
controls to operate any combination of the system inputs, such as Gate trigger, Pedestrian Opening,
Holiday Lockout, etc. It stores up to 64 transmitter buttons, and amongst other access control features,
it provides the ability to selectively add and delete transmitter buttons saved into its memory.
Break-in Alarm1 (a world first)
Make use of the gate operator safety beams to activate a third party alarm, such as armed
response, if a would-be intruder loiters at the gate trying to devise a way to get in.
The alarm activates for the period of time that the beam is broken and for thirty seconds thereafter.
1. Requires gate safety beams to be installed
Ambush Alarm2 (a world first)
Counter the security risk presented by a would-be intruder using the opportunity of covering the
gate operator safety beams, waiting for the gate to be opened and stay open and ambush an
unsuspecting homeowner. This feature will set off an alarm if the beams have been blocked for an
extended period of time. The alarm remains active while the beams remain broken.
2. Requires gate safety beams to be installed
VECTOR2 controller features
Hardware features
Separate weatherproof housing for dual-channel controller, battery and charger
Fully sealed plastic housing for controller to prevent ingress of dirt and insects
&
Easy setup of controller using LCD user interface
&
Removable connectors on controller for easy maintenance
&
Watchdog IC ensures full and safe operation of controller
&
&
Electronic features
Onboard multichannel CENTSYS code-hopping receiver with the ability to learn transmitter buttons to
&
specific functions (e.g. Gate trigger, Pedestrian Opening, Free-exit, Pillar Light Control ,
Holiday Lockout), selectively delete specific transmitters that have been lost or stolen, automatically
learn transmitters (Autolearn) and automatically delete transmitters that are not in use (Delete-NotPresent)
&
Multiple Modes of Operation, including Standard Mode and Condominium Mode (multi-user)
&
Full configuration of gate opening parameters, including independent gate opening and closing
speeds, ramp-up and ramp-down distances and end-of-travel crawl distance
Automatic closing with adjustable time, pushbutton override and selectable according to gate status
&
Selectable leaf-delay on either gate leaf
&
Advanced Positive Close Mode ensuring the gate remains closed in a secure, rigid position
&
Multiple Operating Profiles to suit region of installation - select between ZA, CE, etc.
&
Pedestrian Opening (adjustable opening and Autoclose time)
&
Remote Gate Status Indicator (gate position, power failure, low battery, multiple collision detection and
&
Pillar Light status indication)
Courtesy / Pillar Light Timer with adjustable time
&
Fully configurable pre-delays with multi-modal pre-flash
&
Opening and closing safety beam inputs with beam circuit functional test
&
High security cleared-beam Autoclose in conjunction with safety beam (PIRAC)
&
Break-in and Ambush Alarms with configurable outputs via onboard buzzer, Pillar Light relay, etc.
&
Holiday Lockout – configurable as Emergency Stop
&
Free-exit facility
&
Advanced solenoid or magnetic gate-lock release pulse
&
security / pillar lights must be fitted
infrared safety beams or equivalent detection device must be fitted
onboard receiver must be used or external access control
device such as keypad or keyswitch must be fitted
Emergency Stop pushbutton must be fitted
remote LED must be fitted
inductive loop detector or infrared safety beams must be fitted
SWING GATE
OPERATORS
Technical specifications
Installation information
VECTOR2 400 VECTOR2 500
Allowable gate mass:
Maximum allowable gate mass for VECTOR2 400 operator
Gate swing
angle
90°
100°
110°
120°
Up to
1.5m
Up to
2m
Up to
2.5m
500kg
500kg
500kg
180kg
500kg
500kg
306kg
100kg
500kg
388kg
198kg
65kg
Up to
3m
360kg
160kg
130kg
Up to
3.5m
260kg
190kg
Up to
4m
200kg
150kg
Maximum allowable gate mass for VECTOR2 500 operator
Up to
Up to
Up to
Gate swing
Up to
angle
1.5m
2.5m
3m
2m
750kg
750kg
750kg
550kg
90°
750kg
600kg
750kg
420kg
100°
750kg
320kg
500kg
220kg
110°
310kg
110kg
170kg
120°
An electric lock must be fitted to secure gate in closed position
Up to
3.5m
410kg
310kg
Up to
4m
310kg
230kg
Wind loading
Gate 2.5m wide x 1.8,m high
with 25% coverage
Gate 2.5m wide x 1.8,m high
with 100% coverage
Best
Basic
Best
Basic
geometry
geometry
geometry
geometry
76km/h
38km/h
48km/h
24km/h
VECTOR2 400
79km/h
49km/h
58km/h
30km/h
VECTOR2 500
The installed position of the operator determines the mechanical advantage that the operator
has on the gate. See installation manual for more details
Operator
Minimum installation requirements
Gate opening 90° or less
Gate opening 110°
220V - 240V AC ± 10%, 50Hz
Input voltage
12V DC
Motor voltage
Battery driven (standard capacity - 7Ah)
Motor power supply
Battery charger
CP84E - 800mA @ 13.8V
Domestic
CP84SM - 2A @13.8V
Light-industrial
60mA
/ 170mA
Current consumption (mains)
15A - max
Current consumption (motor at rated load)
250kgf
Operator push force - maximum
Operator stroke
400mm
500mm
27mm/sec
Piston extension / retraction speed
Typical gate opening time
<14 sec
<17 sec
Key release
Manual override
100
/ 250
Maximum number of operations per day
25%
/ 50%
Duty cycle - mains present
Operations in standby with 7Ah battery
70
Half day
58
Full day
Electronic
Collision sensing
2A DC
Controller solenoid output rating
-15°C to +50°C
Operating temperature range
CENTSYS code-hopping, multichannel
Onboard receiver type
64 transmitter buttons
Receiver code storage capacity
433MHz
Receiver frequency
Mass of unit packed (excluding attery)
8.5kg
9kg
Single kit
14kg
15kg
Double kit
Can operate off a solar supply, consult your CENTSYS dealer for assistance
Can increase battery capacity for longer standby times
Based on 25°C ambient temperature and unit not in direct sunlight
Based on an operator push force of less than 50% of rated
Based on double kit excluding infrared safety beams
Assumes a 90° opening gate and optimum mounting position
Assumes full stroke of operator is used
Optional mounting kits available
A: High security kit VECHSK00V1
The high security kit provides one with the means
to ensure optimal security of your home by adding
strength to the installation. The high security
wall bracket enables the installer to spread the
load of the cyclic repetition of the gate opening
over a wider wall area, along with providing
more static strength against attempted forced entries. The long security
plate enables the installer to position the operator according to the
installation tables easily, with a minimum of cutting, grinding and welding. A
padlock should be fitted through both the gate bracket pin and the wall
B: Wall adaptor kit VECWAK00V1
Operator Wall (Min)#2Pillar (Max)*2
VECTOR2 400 150mm
250mm
VECTOR2 500 150mm
335mm
Operator Wall (Min)#2Pillar (Max)*2
VECTOR2 400 150mm
145mm
VECTOR2 500 150mm
210mm
Tables are based on gates shorter than 2.5m
&
For gates 2.5m to 3m long, reduce the maximum pillar thickness by 20mm
&
For gates 3m to 3.5m long, reduce the maximum pillar thickness by 40mm
&
For gates 3.5m to 4m long, reduce the maximum pillar thickness by 60mm
#2 The typical minimum wall clearance required to fit the operator
*2 The maximum allowable pillar thickness on which to fit the operator
Overall dimensions
VECTOR2 400: 1400mm extended
VECTOR2 500: 1600mm extended
VECTOR2 400: 1000mm retracted VECTOR2 400: 400mm stroke
VECTOR2 500: 1100mm retracted VECTOR2 500: 500mm stroke
one sixth of CENTURION height
The wall adaptor plate spreads the load of
the wall bracket over four holes vertically.
This kit can be used with either the standard or
high security wall brackets.
C: Mechano kit VECMAK00V1
This kit has been designed to make the VECTOR2
easier to install, and also to give the installer more
flexibility during the installation. The securing
plates in this kit have been designed to secure to
either the standard or high security wall brackets.
The positions of the holes in the securing plate ensure maximum flexibility in selecting
the most appropriate mounting point for the operator.
D: Gate adaptor kit VECGAK00V1
This kit is used when a need arises to spread the
load absorbed by the gate bracket over a wider area
of the gate surface. The spreader plate can be
welded between bars or onto an existing beam. This
should be used when the gate is made up of thinsection material, and is highly recommended for all
light-industrial installations.
SWING GATE
OPERATORS
The VECTOR2 Wallbox
The VECTOR2 Wallbox, supplied standard with all VECTOR2 kits, is constructed
out of tough, UV-resistant, fade-resistant ABS plastic, providing strength and
long-term durability. The high IP65 rating (ingress protection) will assure you
that just about nothing will get in.
Its contemporary design complements the unobtrusive design of the VECTOR2
operator and enhances the aesthetics of any installation.
CENTSYS Infrared
beams
Always recommended on
any gate automation
installation
SOLO/Lattice proximity
access control Proximity
reader for allowing access
for both pedestrians and
vehicles offering a higher
level of security than the
keypad
SMARTGUARD or
SMARTGUARDair keypad
Pedestrian keyswitch
Basic key operated switch
Cost-effective and versatile for allowing access for
wired and wireless keypad, pedestrians
allowing access to pedestrians
POLOphone intercom
POLOview surveillance
Allows visitors to
communicate with people
inside in order to gain
access to the property
Enhances the POLOphone
by providing CCTV at the
gate
Legend:
FLUX SA loop detector
CENTSYS transmitters
Allows free-exit of vehicles
from the property requires ground loop to be
fitted
Available in one, two, three Steel pole for mounting
and four button variants.
intercom gate station or
Incorporates ultra-secure
access control reader
code-hopping encryption
Gooseneck
Light pipes displaying LED outputs, which will indicate gate status from the
interface board
Interface board with an anti-tamper switch which can be linked to a
security company
Spare fuse holders for both ATO and glass fuses
Clip-in component brackets
Weatherproof design to prevent ingress of water, dust and insects.
Includes the built-in rubber seal on underside of lid
Exterior lip to ensure water stays out, even during the removal of
the cover
Screw-down points for cover and mounting slots located outside of
the general housing to ensure complete sealing of the unit
Solar supply
G-SWITCH-22 devices
Alternative means of
powering the system
- consult your
CENTSYS dealer
Allows for monitoring and
activating the operator, via
your phone, from anywhere in
the world that has GSM
network coverage
Slotted, diagonal mounting slots add mounting flexibility
Low level housing wall provides easy access to terminal points
Five knock-outs for easy, and multiple, cable entry
Gas breathing point allows any potential build-up of gas to escape,
whilst still preventing the ingress of dust, water and ants
Built-in isolator to conform with legal requirements
Built-in, easily accessible earth point
Strip-proof, ultra-strong polycarbonate screws
enclosed in screw-retaining slots
www.centsys.com
Centurion Systems (Pty) Ltd • South Africa
Contact number: +27 11 699 2400
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement