DMP Electronics Thinline 7073 Datasheet

DMP Electronics Thinline 7073 Datasheet
Truefort. LLC
600 Madison Avenue, 25th Floor
New York, NY 10022
(212) 759-0050
Rob Heron
P.O. Box 1004
64495 Cold Creek Lane
St. Ignatius, MT 59865
July 16, 2010
Rob:
As per our discussions, and feedback received from your June 30, 2010 meeting, we are
pleased to present this proposal for an integrated solution that will encompass intrusion
detection, closed circuit TV, smoke and heat sensing, carbon monoxide detection,
wireless access (WI-FI), and video analytics. Please note that the infrastructure to
support these systems has been captured within our cost estimate and as we discussed,
your local electrical vendor may be involved as required or as per your direction.
A strategic partner of Truefort will be available and at our disposal for any services
needs that may arise following the initial installation. They will also be an integral part
of the initial deployment and will be well versed in the overall installation, thus
providing another resource to you.
Moving from your existing intrusion and fire detection architecture to one that is truly
distributed will remove the issue of a single point of failure as each major structure will
now benefit from a standalone point of control. All control systems will be fully battery
backed up and all equipment will be designed for the challenging environmental
conditions.
Any new devices will be recessed whenever possible thus increasing the aesthetic
appeal of the installation. Should it be required, any devices with the exception of heat
and smoke detectors may be finished as you deem necessary to further blend into their
mounting surfaces.
We have reflected the cost of travel separately in the following pages and have strived
to provide a detailed list of data sheets to accurately reflect our proposed equipment.
Should you require any additional information, please do not hesitate to contact us at
your earliest convenience.
Sincerely,
Howard Shapiro
General Summary of Installation









Telephone services at road – provide day/night, vandal resistant CCTV camera to
view general areas of incoming services and physical protection in the form of
sealed reed contact switches as needed for equipment enclosures for these
entry points, i.e. telephone company handoff. Fence (by others) with intrusion
detection sensors to also be placed at this location.
Gate Entrance – provide Bosch license plate camera, improve gate intercom
camera quality by replacing same and replacing existing camera with
indoor/outdoor, day/night, vandal resistant mini-dome camera to increase the
overall view of this entry point.
Road leading from gate into property – An additional camera (indoor/outdoor,
day/night mini-dome) will be added to view this route in order to have a more
seamless view of approaching vehicles. Mounting pole to be provided by others.
Fuel shed – provide exterior camera coverage of area and structure by way of
indoor/outdoor, day/night, mini-dome.
Caretaker’s residence – Replace any and all control equipment and wireless
devices for complete perimeter protection. Install smoke and heat detection
devices as required for residential structure and garage area (heat detection for
garage). A separate alarm control panel for this residence will be provided.
Guest House – An alarm control panel and installation of security/smoke
detection system as required will be installed.
Barn – An alarm control panel and smoke/heat detection system as required for
all areas will be installed.
Office – An alarm panel for this structure will be installed and ensure that
intrusion coverage is of area type for times when structure is not occupied.
Temperature/humidity alarms for server room and smoke detection will be
provided as required. Install emergency wireless telephone in safe area.
Main House – An alarm control panel and alarm sensors for complete perimeter
security will be provided. We will ensure that all existing smoke detectors
function as required and replace any defective devices. Install emergency
wireless telephone in safe area to match phone to be placed in office.
General Notes:

Additional smoke detection devices only if absolutely necessary and all
locations to be as discreet as possible.





















Separate alarm panels should be installed for each building as described
above to ensure a high level of protection and eliminate a single point of
failure.
All alarm panels to have full battery back-up and multiple paths of
communication (POTS line, radio, Internet).
All keypads will be non-touch screen and backlit for ease-of-viewing.
Forward looking infrared cameras to cover inner perimeter (FLIR) to
provide protection in all weather conditions and alert on-premise staff
via wireless device i.e. iPhone. Wireless devices by others.
All 120VAC power required for equipment to be provided by others.
Video analytic software to provide notification of persons on property
and distinguish between animals and humans in-terms of size. Please
note that these analytic systems do not provide 100% detection and may
also have false, positive activations on occasion.
Video to maintain privacy and discretion as only basic imagery will be
provided and not actual faces, bodies of people by use of FLIR
technology.
New video server in server room in accordance with Daniel’s
requirements and storage to be designed at (21) days.
Low power wireless LAN for video transmission in accordance with
Daniel’s requirements for coverage from gate to rear of property.
Any existing wireless devices that are able to be hardwired will be
changed at time of installation.
Any existing wireless devices that cannot be hardwired will be made
more discreet if at all possible as indicated above.
Low/high temperature sensors to be placed as required in all buildings.
Water detection sensors to be placed as required in all buildings as
required.
All devices will be suitable for extreme temperature conditions as
required.
Full on-site supervision of installation by HS.
Full training of client, IT personnel, and Caretaker.
End user training of client.
Full attic stock of parts on-site as discussed.
Strategic partner within “one plane stop” in-case of catastrophic failure
(2) visits per year for required preventative maintenance by Truefort
(HS).
No local vendor interaction to maintain full privacy.







Full telephone support, documentation maintenance, and related
services by Truefort (HS).
Daniel and Rob to meet with local (Spokane partner on-site).
Monitoring company will be NJ based.
This installation will be staffed to be completed within (8) business days,
weather permitting. Trenching, backfill, and deliverables by “others”
may impact this timeline.
Any reworking of the entrance gate and related systems is excluded from
this proposal, but will gladly be provided under a separate agreement
(change order) if required at a later date.
No existing equipment will be re-used with the exception of hardwired
contact switches that are found to be in “good repair.” Wiring to same
will be tested and if found to be in serviceable condition, will also be left
intact (replacement of field device wiring is assumed to be in proper
working order).
Viewing of all new cameras will be possible via the client’s local area
network. Configuration of the network is by others if required.
Major Bill of Materials (part numbers contained within attached data sheets)
Services Entrance at Roadway
Qty. 1
Qty. 4
Qty. 1
Qty. 1
Qty. 1
Axis mini-dome camera
GRI sealed contact switch
Altronix exterior power supply
Equipment enclosure, heater, and batteries as required
Lot - Lightning protection devices
Vehicular Entrance Gate
Qty. 1
Qty. 1
Qty. 1
Qty. 1
Qty. 1
Qty. 1
Qty. 1
Axis mini-dome camera
Gate intercom and camera unit
Fiber optic devices to support services camera and gate cams, including
two-way voice communication
Bosch license plate camera including mounting/req’d accessories
Altronix exterior power supply
Equipment enclosure, heater, and batteries as required
Lot - Lightning protection devices
Roadway to interior of property
Qty. 1
Qty. 1
Qty. 1
Qty. 1
Qty. 1
Axis mini-dome camera
Fiber optic devices for camera support (fiber from gate spliced at this
point)
Altronix exterior power supply
Equipment enclosure, heater, and batteries as required
Lot - Lightning protection devices
Fuel Shed
Qty. 1
Qty. 1
Qty. 1
Qty. 1
Qty. 1
Axis mini-dome camera
Fiber optic devices for camera support (fiber spliced at this point)
Rated door contacts (fuel contained in bldg.)
Equipment enclosure, heater, and batteries as required
Lot - Lightning protection devices
Caretaker’s residence
Qty. 1
Qty. 2
Qty. 1
Qty. 2
Qty. 1
Qty. 1
Qty. 2
Lot – wireless contacts for all exterior openings (doors/windows)
PIR/microwave area detector
Alarm control panel
Alarm control keypad
Lot- smoke and heat detection devices as per current release of NFPA 72
Low temperature sensor
Water detection sensor
Guest House
Qty. 1
Qty. 1
Qty. 1
Qty. 1
Qty. 1
Qty. 1
Qty. 1
Lot – wireless contacts for all exterior openings (doors/windows)
PIR/microwave area detector
Alarm control panel
Alarm control keypad
Lot- smoke and heat detection devices as per current release of NFPA 72
Low temperature sensor
Water detection sensor
Barn
Qty. 1
Qty. 1
Qty. 1
Qty. 1
Qty. 1
Qty. 3
Lot – wireless contacts for all exterior openings (doors/windows)
Alarm control panel
Alarm control keypad
Lot- smoke and heat detection devices as per current release of NFPA 72
Low temperature sensor
Water detection sensor
Office
Qty. 1
Qty. 3
Qty. 1
Qty. 1
Qty. 1
Qty. 3
Qty. 3
Qty. 1
Lot – wireless contacts for all exterior openings (doors/windows)
PIR/microwave area detector
Alarm control panel
Alarm control keypad
Lot- smoke and heat detection devices as per current release of NFPA 72
Low temperature sensor (high temp also possible for server room)
Water detection sensor
Emergency telephone – safe area
Main House
Qty. 1
Qty. 2
Qty. 1
Qty. 2
Qty. 1
Qty. 1
Qty. 2
Qty. 4
Qty. 1
Lot – wireless contacts for all exterior openings (doors/windows)
PIR/microwave area detector (to be activated when client is not in
residence)
Alarm control panel
Alarm control keypad
Lot- smoke and heat detection devices as per current release of NFPA 72
Lot- glass break detectors
Low temperature sensor
Water detection sensor
Emergency telephone – safe area
Inner Perimeter
Qty. 6
Qty. 6
Qty. 6
FLIR SR series cameras – final location to be determined and
memorialized onto site plan – mounting poles to be kept to a minimum
by utilizing existing structures whenever possible
Altronix outdoor power supply
Equipment enclosure, heater, and batteries as required
Qty. 1
Qty. 6
Lot - Lightning protection devices for all cameras
Fiber optic cabling to all cameras, returning to closest available, existing
fiber optic infrastructure for network access
CCTV Control System
Qty. 1
Qty. 1
Qty. 1
Qty. 1
Qty. 1
Qty. 3
Qty. 1
Intransa video server to support up to (16) cameras
Server storage – RAID 5 configuration for up to (21) days of online
storage
Milestone XProtect Professional software, licensing, and support licenses
for exact number of installed cameras +1 spare
Video analytic software for all installed cameras
Video transmission plug-in application to support live view of cameras on
handheld, wi-fi enabled devices
Firetide access point with associated antennas, power supplies,
management software, and lightning protection
Unlimited client licenses are included for Milestone software
Intrusion, Fire, non-FLIR CCTV field equipment:
Intrusion, Fire, non-FLIR CCTV field labor:
FLIR cameras and CCTV control equipment:
FLIR cameras and CCTV control labor:
Attic (on-site) spare parts inventory:
Total Investment:
On-going Support
Annual support through bi-annual service visits by HS after first year:
$67,593**
$22,532
$115,830**
$38,610
$12,500
$257,065
$15,000
Travel for visits will be invoiced at actual cost and the following is an estimate:
A 2-day visit by Truefort personnel, including travel costs is estimated at: $6250
**Includes fiber optic infrastructure to support all proposed devices along with on-site
setup and training. HS to be on-site for installation and commissioning and this cost is
also carried within initial pricing.
The following pages contain all manufacturer’s data sheets for the major system
components as described within this proposal. They are presented in the order in which
they appear within the body of this document.
DATASHEET
AXIS P33 Network Camera Series
Fixed domes for any environment with remote focus and zoom.
> High-performance
video including HDTV
quality
> Multiple H.264 video
streams
> Easy installation with
remote focus and
zoom
> Outdoor-ready
models designed for
extreme temperatures
> Power over Ethernet
AXIS P33 Network Cameras constitute a series of indoor and outdoor-ready fixed domes designed
for efficient installation. Offering high performance video, including HDTV image quality and multiple
H.264 streams, these cameras are ideal for unobtrusive video surveillance in exposed areas such as
airports, subways, retail stores, schools and university campuses.
AXIS P33 Series delivers superb video quality in 30
frames per second in full resolution. AXIS P3343
Network Cameras provide SVGA resolution, whereas
the AXIS P3344 models offer 1MP, or HDTV 720p in
compliance with the SMPTE standard in resolution,
color representation and frame rate.
AXIS P33 Network Cameras support automatic day and
night functionality with removable infrared-cut filter
for increased light sensitivity.
AXIS P33 Series provides multiple, individually configurable video streams in H.264 compression, which
greatly optimizes bandwidth and storage without
compromising image quality. Motion JPEG is also
supported for increased flexibility.
The remote focus feature allows for convenient installation eliminating the need for hands-on focusing at the
camera, and the remote zoom and pixel counter
features ensure that the camera’s viewing angle is
optimized for the scene and pixel resolution.
AXIS P33 Network Cameras range from standard
indoor models to vandal-resistant outdoor models,
perfectly adapted for harsh environments. All models in
AXIS P33 Series have low, environment friendly power
consumption, supplied by standard Power over Ethernet
(IEEE 802.3af). This is the case even for the weatherproof models that operate in extreme temperatures
from -40° to 55° C (-40° to 131 °F).
Fixed domes designed for efficient installation
- indoors or outdoors
AXIS P33 Series is the perfect choice for a wide range of demanding video applications in
outdoor and indoor environments. AXIS P33 Network Cameras are designed for professional
video surveillance with easy and reliable installation in focus.
Outdoor-ready installation for extreme
temperatures
Easy installation with remote focus and
zoom
The outdoor models of AXIS P33 Series are specially
designed for reliable, vandal-resistant and weatherproof installation, with pre-installed heater and fan,
and an integrated dehumidifying membrane eliminating any humidity caught in the camera casing during
installation. These cameras come with a 5 m (16 ft.)
Ethernet cable with a pre-mounted, specially designed
gasket, enabling flush wall mounting and requiring no
additional sealant. A weather shield is also included for
effective protection against reflections from sunlight,
or build-ups of rain or snow.
AXIS P33 Network Cameras offer unique installation
capabilities with remote focus and zoom. The remote
focus feature enables convenient focusing over the
network, eliminating the need for hands-on finetuning at the camera. The remote zoom functionality
ensures that the viewing angle is optimized for the
area to be monitored.
Mounting options
AXIS P33 Series offers a wide range of optional
indoor and outdoor mounting kits for installation in a
drop ceiling or on a wall, pole, corner or junction box,
etc. Both indoor and outdoor camera models include a
smoked transparent cover as an alternative to the clear
cover, for additional flexibility.
Unique pixel counter feature
The unique pixel counter offered in AXIS P33 Series
allows the installer to easily verify that the camera
installation fulfills any regulatory or specific customer
requirements, for example calculating the pixel resolution of the face of a person passing a doorway monitored by the camera.
AXIS P3343-VE /P3344-VE
110 mm (4.3’’)
∅ 96 mm (3.8’’)
178 mm (7.0’’)
AXIS P3343/-V/P3344/-V
96 mm (3.8’’)
∅ 96 mm (3.8’’)
148 mm (5.8’’)
Extreme temperature installation
Unique pixel counter feature
AXIS P3343-VE/P3344-VE
Mounting
bracket
Flat cable
gaskets
Fan Dehumidifying
membrane
Snap-in mount
Motorized lens
Heater module
Captive screws
Captive screws
Weather shield
Cable
protection
AXIS P3343/-V/P3344/-V
SD memory
card slot
Camera unit
Motorized lens
Dome cover
Network connector
Audio
Audio
out
in
LED indicators
Control button
I/O connector
Optional accessories for outdoor models
Optional accessories for indoor models
Pendant adapter kit including weather shield
AXIS T91A Brackets
AXIS T91A Brackets
I/O audio cable, 5 m (16 ft.)
Pendant adapter kit
Ceiling
Wall
Corner
For information on AXIS Camera Station and
video management software from
Axis’ Application Development Partners, see
www.axis.com/products/video/software/
Mounting bracket
Wall
Drop-ceiling mount kit with
transparent or smoked cover
Camera
Models
Image sensor
Lens
Day and night
Minimum
illumination
Shutter time
Camera angle
adjustment
Pan/Tilt/Zoom
Video
Video compression
Resolutions
Frame rate
H.264
Frame rate
Motion JPEG
Video streaming
Image settings
Audio
Audio streaming
Audio
compression
Audio input/
output
AXIS P3343: SVGA resolution, tamper-resistant, indoor
AXIS P3343-V: SVGA, vandal-resistant, indoor
AXIS P3343-VE: SVGA, vandal-resistant, outdoor
AXIS P3344: 1MP/HDTV 720p, tamper-resistant, indoor
AXIS P3344-V: 1MP/HDTV 720p, vandal-resistant, indoor
AXIS P3344-VE: 1MP/HDTV 720p, vandal-resistant, outdoor
6mm or12mm as suffix specifies lens option
Note: AXIS P3301/-V and AXIS P3304/-V are not part of
AXIS P33 Series
1/4” Progressive scan RGB CMOS
Varifocal, DC-iris, remote focus and zoom
AXIS P3343/-V/-VE 6mm: 2.5-6 mm, F1.2, angle of view*: 34°-72°
AXIS P3343/-V/-VE 12mm: 3.3-12 mm, F1.4, angle of
view*: 17°-54°
AXIS P3344/-V/-VE 6mm: 2.5-6 mm, F1.4, angle of view*: 40°-87°
AXIS P3344/-V/-VE 12mm: 3.3-12 mm, F1.6, angle of
view*: 20°-70°
* horizontal
Automatically removable infrared-cut filter
AXIS P3343/-V/-VE
AXIS P3343/-V/-VE
AXIS P3344/-V/-VE
AXIS P3344/-V/-VE
1/25000 s to 1/6 s
6mm: Color: 0.2 lux, F1.2, B/W: 0.04 lux, F1.2
12mm: Color: 0.3 lux, F1.4, B/W: 0.05 lux, F1.4
6mm: Color: 0.3 lux, F1.4, B/W: 0.05 lux, F1.4
12 mm: Color: 0.4 lux, F1.6, B/W: 0.06 lux, F1.6
Network
Security
Supported protocols
System integration
Open API for software integration, including VAPIX® from
Application
Axis Communications available at www.axis.com
Programming
Interface
Intelligent video Video motion detection, active tampering alarm, audio detection
Alarm triggers
Intelligent video, external input
Alarm events
File upload via FTP, HTTP and email
Notification via email, HTTP and TCP
External output activation
Video recording to local storage
48 MB pre- and post alarm
Video buffer
General
Casing
Pan 360°, tilt 170°, rotation 340°
Digital PTZ, preset positions, guard tour
H.264 (MPEG-4 Part 10/AVC)
Motion JPEG
AXIS P3343/-V/-VE: 800x600 to 160x90
AXIS P3344/-V/-VE: 1280x800 to 160x90
30 fps in all resolutions
30 fps in all resolutions
Multi-stream H.264 and Motion JPEG
Controllable frame rate and bandwidth
VBR/CBR H.264
Figures below specify the number of individually configurable
streams provided in full resolution and frame rate (see details above)
when using one compression format. More streams can be achieved
if identical or limited in frame rate/resolution.
AXIS P3343/-V/-VE: H.264/Motion JPEG: 2 streams
AXIS P3344/-V/-VE: H.264: 1 stream (2 streams in HDTV 720p);
Motion JPEG: 1 stream
Compression, color, brightness, sharpness, contrast, white balance,
exposure control, exposure zones, backlight compensation, wide
dynamic range, fine tuning of behavior at low light
Rotation: 0°, 90°, 180°, 270°
Mirroring of images
Text and image overlay
Privacy mask
Two-way
AAC LC 8/16 kHz
G.711 PCM 8 kHz
G.726 ADPCM 8 kHz
Configurable bit rate
External microphone input or line input, line level output
AXIS P3343/-V and AXIS P3344/-V: Built-in microphone
Password protection, IP address filtering, digest authentication,
user access log, IEEE 802.1X* network access control,
HTTPS* encryption
IPv4/v6, HTTP, HTTPS*, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour,
UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP,
UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS
Processor and memory
Power
Connectors
Local storage
Operating
conditions
Approvals
Weight
Included
accessories
Polycarbonate transparent cover
Aluminum inner camera module with encapsulated electronics
AXIS P3343/P3344: Tamper-resistant plastic casing
AXIS P3343-V/P3344-V: 1000 kg (2200 lb.) impact-resistant
aluminum casing
AXIS P3343-VE/P3344-VE: 1000 kg (2200 lb.) impact-resistant
IP66- and NEMA 4X-rated aluminum casing with integrated
dehumidifying membrane
ARTPEC-3, 128 MB RAM, 128 MB Flash
Power over Ethernet IEEE 802.3af
AXIS P3343/-V and AXIS P3344/-V: Class 2
AXIS P3343-VE/P3344-VE: Class 3
RJ-45 10BASE-T/100BASE-TX PoE
Terminal block for 1 alarm input and 1 output
3.5 mm mic/line in, 3.5 mm line out
SD/SDHC memory card slot (card not included)
AXIS P3343/-V and AXIS P3344/-V: 0 to 50 °C (32 to 122 °F)
Humidity 20 - 80% RH (non-condensing)
AXIS P3343-VE/P3344-VE: -40 to 55 °C (-40 to 131 °F)
EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 55024,
FCC Part 15 Subpart B Class B, ICES-003 Class B,
VCCI Class B, C-tick AS/NZS CISPR 22, EN 60950-1
AXIS P3343-VE/P3344-VE: IEC 60529 IP66, NEMA 250 Type 4X
AXIS P3343/P3344: 445 g (1.0 lb.)
AXIS P3343-V/P3344-V: 660 g (1.5 lb.)
AXIS P3343-VE/P3344-VE: 1.4 kg (3.1 lb.)
Mounting and connector kits, Installation Guide, CD with installation
tools, recording software and User’s Manual, Windows decoder
1-user license, smoked transparent cover
AXIS P3343-VE/P3344-VE: Mounting bracket, cable shield, weather
shield, 5 m (16ft.) network cable with pre-mounted gasket
* This product includes software developed by the OpenSSL
Project for use in the OpenSSL Toolkit. (www.openssl.org)
More information is available at www.axis.com
©2010 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB
in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies. We reserve the right
to introduce modifications without notice.
37032/EN/R2/1005
Technical Specifications – AXIS P33 Network Camera Series
Behavior Watch™ - Analytic Video Server
Powerful Analytics
Proactive Server-Based Behavior
Detection
Motion detection
Static object detection
Path detection
Presence detection
Directional motion
Queue detection
Crowd detection
t
t
t
t
t
t
t
MATE server-based behavior detection solutions leverage
powerful, field-proven video analysis algorithms to turn any
analog or IP surveillance camera into an intelligent, proactive,
real-timedetectionsystem.Built-inrules-basedalertfunctionality
enablescontrolroompersonneltopreciselydefinewhichevents
warrant an alert, based on their organization’s unique needs.
Designed and built for the most challenging indoor and outdoor
environments, MATE’s robust server-based video analytics
products expertly filter out background disturbances. The
advanced scene learning feature ignores irrelevant motion or
objects, and delivers high detection probability with extremely
low false alarm rates.
t
t
t
t
t
t
Object removal
Object started
Loitering
Speed
Object classification
Rule dependency
Why Behavior Watch
With rule dependency, Scene switch (PTZ), classification,
scheduling and wide range of video analytics solutions,
Mate offers the most advanced video analytics solution in
the market.
The Behavior Watch™ Line of
Products
The MATE Behavior Watch server-based product line receives
up to twelve analog camera feeds or IP video network streams
from existing VMS, NVR systems. Behavior Watch analyzes
object behavior based on pre-defined parameters and sends
actionable event metadata information, in XML format to the
VMS/NVR database. The end result is a uniquely cost-effective
state-of-the-art IP surveillance solution, fully in-line with
today’s high-performance CCTV and IP surveillance standards.
>
Top notch video analytics
>
Hybrid system for IP & analog
cameras or third party systems
>
Open architecture for seamless integration
>
Built-in rules-based alert engine
enables multiple concurrent detection
rules for each video input
>
Advanced classification functionality
distinguishes between different types
of objects
>
Scene Switch™ for tracking up to four
different scenes from a single video feed
>
Automated video surveillance
for hundreds of cameras
Video Wall
IP Video
Stream
/ W A N
IP Video Stream
Behavior Watch
Metadata Event
L
Behavior Watch
DVR
Analog / IP
Cameras
A d d i n g
A
Metadata Event
Analog
Video
Analog / IP / Megapix el
Cameras
N
MATE Cor tex
Management System
NVR/ VMS
Viewer
Metadata
Event
I n t e l l i g e n c e
t o
V i d e o
S u r v e i l l a n c e
Behavior Watch™ - Analytic Video Server
Key Behavior Watch Features
About MATE
MATE Intelligent Video
is a global provider of
cutting-edge, real time
video analytics solutions
for proactive video and IP
surveillance, people and car
counting. MATE’s advanced
video content analysis
technology detects and
analyzes potential threats
and hazards, generating realtime alerts based on user’s
pre-defined parameters.
Founded in 1997, MATE has
gained extensive experience
in the video analytics field,
and has positioned itself as a
market leader. Leveraging an
open architecture, MATE’s
flexible and field-proven
solutions integrate easily into
any network topology, and are
sold, installed and supported
by top tier systems integrators
and distributors worldwide.
International
8 Hartom St.
Beck Science Center
P.O. Box 45116
91450 Jerusalem, Israel
Tel: +972-2-588-5000
Fax: +972-2-532-8705
[email protected]
www.mate.co.il
t
t
t
t
t
t
t
t
t
t
t
t
Server-based solution - rack mount
Supports both analog and IP cameras
Advanced human/vehicle object classification
Rule Dependency - create dependency between two regular rules with a condition such as
“AND”, “THEN” or “REPEAT”
Scene Switch™ for tracking up to four different scenes from a single video feed
Optional pre and post-alarm recording
Low FAR (False Alarm Rate) in any environment or weather
Multiple concurrent detection rules for each video input
Easy to use video detection rules and time-based schedules
Real-time camera tamper detection
Flexible design offering up to twelve-channel input
Integration with market-leading IP surveillance, CCTV and DVR/NVR/NVMS vendors
Centralized Management
Behavior Watch solutions are centrally controlled and managed through the MATE Cortex™ video
analytics management system. Cortex simultaneously manages all MATE devices, including multiple
Behavior Watch units and other video detection units.
Cortex features:
t Remote configuration and upgrades
t Live video and alarm display with object tracking overlay
t Event table for alarm browsing with alarm snap shot images
t Event review and search tools
t User policies and permissions
t Multi site status display with indication of disconnected or alarmed sites
t Map-based alarm display with multiple map and zooming capabilities
BehaviorWatch Specifications
BW 2004/2008/2012/2016 Rack Mount
North America
Hardware
7600 Colshire Drive,
Suite 141
McLean, VA 22102
Tel: +1(703) 889 8373
Fax: +1(703) 991 0552
[email protected]
www.mateusa.net
CPU
Base Quad Core Intel® Xeon® E5420, 2x6MB Cache, 2.5GHz, 1333MHz FSB
RAM
4GB FB 667MHz Memory (2x2GB dual rank DIMMs)
China
10-09/A4 Ver. 4.2
Room 701, East Ocean Center
24A Jianguomenwai St.
Chaoyang District 100004
Beijing, China
Tel: +86-10-65157038/7039
Fax: +86-10-65157833
[email protected]
www.mate.co.il
HD
RAID Hard Drive 2 x 250GB SATA 7200rpm
Network
10/100/1000
Inputs
4/8/12 port analog video PAL/NTSC
4/8/12 video stream MJPEG/MPEG4
110/220 VAC 50/60 Hz. 670W
Power Consumption
Size (HxWxD)
Weight
4.26cm x 42.6cm x 77.2cm;
1.67” x 16.7” x 30.4”
16.3 Kg / 35.8 lbs
Operating Temperature
10º C to 35º C / 50º F to 95º F
Operating Humidity
5% to 95%
Software
OS
Windows Server 2003
DB
Microsoft SQL Server, 2005 Express
Application
.net framework 2.0
Product offerings and specifications are subject to change without notice. Actual products may vary from photos.
Not all products include all features. Availability varies by region; contact your sales representative.
A d d i n g
I n t e l l i g e n c e
t o
V i d e o
S u r v e i l l a n c e
SECURITY
SR-Series
Fixed-Site Thermal Security Cameras
The best thermal security cameras in the business
FLIR’s powerful SR-Series thermal security cameras complement and complete your security camera network. They turn night into day,
allowing you to see intruders invisible to the naked eye.
FLIR’s SR-Series thermal security cameras feature full 160 x 120 or 320 × 240 image resolution, come in industry-standard
environmental enclosures, use common ¼-20 mounting hardware, and are compatible with a wide variety of third-party mounts and
pedestals (Bosch, Video Alarm and Pelco, to name a few), making installation a snap. An optional Pan/Tilt that operates with Pelco D
control protocol is also available.
•
•
•
•
•
•
•
•
•
•
•
Creates video images from heat, night and day, in good weather and bad
High-quality 24/7 thermal video security coverage
Digital Detail Enhancement (DDE) for optimal image quality
NTSC or PAL composite video-output is compatible with all third-party accessories
External Video-Analytics compatible
Pelco D, RS-232 & RS-422 capability on certain models
Network ready – fully compatible with third-party video encoders
Optional Pan/Tilt has Pelco D interface control and is widely supported by other third-party control solutions
High contrast imagery optimized to get the most out of video analytics software to create virtual perimeters
No need for the expense and complication of added lighting infrastructure
Clear vision in challenging conditions (lowlight, no light, backlight, haze, smoke, fog, etc.)
Perfect For:
•
•
•
•
•
Monitoring dimly lit or unlit entries and exits
Indoor and outdoor parking lots and structures
Warehouses, waterfronts, large open areas
Residential properties and gated communities
Anywhere you need to see at night
Thermal cameras provide threat detection and 24-hour situational awareness.
SR-Series
Camera Platform Type
Fixed
Fixed
Thermal Camera Specs
Array Format (NTSC)
160 x 120
320 × 240
Long-Life, Uncooled
VOx Microbolometer
Long-Life, Uncooled
VOx Microbolometer
Effective Resolution
19,200
76,800
Pixel Pitch
25 µm
25 µm
Focal Length
9 mm, 13 mm, 19 mm
13 mm, 19 mm, 35 mm, 50 mm, 100 mm
Field Of View
24° × 20° (SR-124; 9 mm)
17° × 14° (SR-117; 13 mm)
12° × 10° (SR-112; 19 mm)
48° × 39° (SR-348; 9 mm)
34° × 28° (SR-334; 13 mm)
24° × 19° (SR-324; 19 mm)
13° × 10° (SR-313; 35 mm)
9° × 7° (SR-309; 50 mm)
4.6° × 3.7° (SR-304; 100 mm)
2× E-zoom
2× & 4× E-zoom
Detector Type
Zoom
Spectral Range
7.5 to 13.5 μm
7.5 to 13.5 μm
Focus
Athermalized, Focus-free
Athermalized, Focus-free
Frame Rate
NTSC: 30 Hz; PAL 25 Hz
NTSC: 30 Hz; PAL 25 Hz
Standard
Standard
Outputs
Composite Video NTSC or PAL
Control
Point To Point (stand alone)
Standard
Standard
RS-422/232
RS-422/232
4.6 lb
4.6 lb; <7 lb (SR-304)
10.5” × 5” × 5.7”
(267 mm × 127 mm × 145 mm)
10.5” x 5” x 5.7”
14.25” x 5” x 5.7” (SR-304)
Serial
General
Weight
Dimensions (L,W,H)
Power Requirements
14-32 VDC or 18-27 VAC
24 VAC: 5 VA nominal, 21 VA max
24 VDC: 3 W nominal, 10 W max
Power Consumption
SR-Series Camera MeAsurements
14-32 VDC or 18-27 VAC
24 VAC: 5 VA nominal; 21 VA (348,334,324),
11 VA (313), 17 VA (309), 48 VA (304) max
24 VDC: 3 W nominal; 10 W (348,334,324),
6 W (313), 8 W (309), 25 W (304) max
4.00” (10.08)
Dimensions in
Inches (cm)
Length
Height
2.00” (5.08)
1.00” (2.54)
SR-124, SR-117, SR-112, SR-348,
SR-334, SR-324, SR-313, SR-309
10.5” (26.7 cm)
5.7” (14.48 cm)
1.00” (2.54)
2.00” (5.08)
14.5” (36.8 cm)
5.7” (14.48 cm)
Santa Barbara
FLIR Systems, Inc.
70 Castilian Dr.
Goleta, CA 93117
USA
PH: + 1 805.964.9797
PH: + 1 877.773.3547 (Sales)
PH: + 1 888.747.3547 (Apps)
FX: + 1 805.685.2711
[email protected]
The Netherlands
FLIR Systems BV
SR-304
Charles Petitweg 21
4847 NW Teteringen - Breda
The Netherlands
PH: +31 (0) 765.794194
FX: +31 (0) 765.794199
[email protected]
Mounting Sled
Corporate Headquarters
FLIR Systems, Inc.
27700 SW Parkway Ave.
Wilsonville, OR 97070
USA
PH: + 1 503.498.3547
FX: + 1 503.498.3153
Side View
Rear View
Equipment described herein may require US Government authorization for export purposes. Diversion contrary to US law is prohibited.
©2010 FLIR Systems, Inc. Specifications are subject to change without notice, check our website: www.flir.com. 1001-009rev4
w w w.flir.com
PROTECTS PROPERTY FROM THE ADVERSE EFFECTS OF WATER LEAKAGE
WB-200
WB-350
Moisture Detection Systems
WaterBug sensors work by forming a conductive bridge
between two electrical contacts. Ideal for basement sump
pumps, drain areas, computer rooms, document storage
areas, warehouses and sprinkler systems.
WB-200
Use in conjunction with alarm panel, bell, wireless transmitter, etc.
Run as many as 6 sensor probes up to 100’ away from unit.
• Hardwire powered
• Includes one standard sensor (W-S-U)
WB-350
Same as WB-200 but battery powered.
• Low battery alarm
• Integrated buzzer
SPECIFICATIONS
WB-200 & WB-350 WATERBUG™
SPECIFICATION
VALUE
Console Size
5” x 2.44” x 1.25” (12.7 cm x 6.2 cm x 3.18 cm)
Probe Size (standard PN#1040)
2” x 3” x .88” (5.1 cm x 7.6 cm x 2.2 cm)
Probe Size (under carpet PN # 1041)
2” x 3” x .18” (5.1 cm x 7.6 cm x .5 cm)
Power Requirements (resting state)
WB-200: 12V or 24V AC or DC • WB-350: 9V battery @ 1.8 micro amps
Power Requirements (alarm condition)
WB-200: 5mA @ 12, 24 VDC, 13.5mA @ 12, 24 VAC • WB-350: 9V battery @ 380 micro amps
Sensitivity
Will not alarm due to high humidity or condensation
Approximate Battery Life
1 year (WB-350 only)
Operating Temperature
Control and Probe 32° to 140° F (0° to 60° C)
Outputs
WB-200: Form C (SPDT) 1 Amp @ 24Vac, 1Amp @ 30 VDC • WB-350: Open collector max to tripline- 30
Recommended Dist. Between Probes & Console
1-2 probes: 200ft (61 m) max. • 3 or more probes: 100ft (30.5 m) per probe
Recommended Max. Probes Per Console
6
ACCESSORIES
W-S-U
DESCRIPTION
PART #
Surface Sensor
W-S-U
Under Carpet Sensor
W-UC-U
Optional 12 VDC Power Supply
12VDCT
W-UC-U
1950 Excel Drive
Mankato, MN 56001
1-800-635-4269
In MN: 507-625-7231
FAX: 507-387-2488
www.winlandsecurity.com
©2006 Winland Electronics Inc.
D-011-0024 Rev. B
Reliable Connectivity Anywhere™
HotPort 7000 (7010/7020)
Wireless Mesh Nodes
®
Viable Alternative to Fiber
Infrastructure mesh technology from
Firetide provides municipal, industrial
and enterprise users with the bandwidth
needed to expand the reach of their existing
networks, while adding a variety of fixed and
mobile applications: city-wide video surveillance, traffic management and intelligent
transportation systems, Wi-Fi access for
mobile city workers and wireless broadband
for underserved areas.
Convenient Upgrade Paths
HotPort® 7000 mesh nodes ship as
802.11a/b/g/n dual-radio capable hardware,
with enhanced functionality enabled through
software licenses. Projects that do not
require 802.11n MIMO (multiple input, multiple output) capacity or dual-radio capability
can start with 802.11a/b/g-enabled singleradio configuration. Dual-radio functionality
can easily be enabled through a software
license at an additional cost. Similarly, a
separate software license can enable MIMO
functionality for operation in 40 MHz channels, and to take advantage of 802.11n
technology to achieve throughput of up to
300 Mbps outdoors and 400 Mbps indoors.
HotPort 7000 Indoor Mesh Node
Easier Deployments
& Network Management
Unlike wired networks, where deployment is
cumbersome, the self-forming nature of the
Firetide mesh network ensures rapid deployment of large-scale networks. The HotPort
7000 mesh features integrated spectrum
analysis, network capacity planning and
antenna alignment tools for easier deployments and network management.
Higher Reliability
The HotPort 7000 nodes form a multipoint to multi-point ad hoc wireless mesh
network with no single point of failure.
Unlike a wired network, where a cut in the
cable could take several days to resolve, the
Firetide mesh routes the traffic immediately
on an alternate link ensuring continuous
service and network availability.
Dual-radio Performance
To maximize performance, dual-radio
HotPort 7000 nodes support two radio
modes. In the “bonded” mode, both radios
are combined to operate as a single unit
that provides double the bandwidth of a single radio equivalent. In the “linear” mode,
both radios operate independently enabling
sustained bandwidth levels over an unlimited number of hops. This enables long
linear topologies, such as when networking
a railway line, and provides a sustained
level of service to every node, which is
also critical for large municipal networks.
Quality of Service
Firetide's patented AutoMesh™ flow based
routing protocol supports advanced load
balancing and congestion control mechanisms for optimal routing within the mesh
network. The HotPort 7000 mesh infrastructure also provides extensive VLAN capabilities
critical for deploying a multi-service network
on a large scale.
Metro-scale Deployments
Firetide's network easily scales up to several
hundreds of mesh nodes for city-wide deployment. Advanced features like MeshBridge™
and Gigabit EthernetDirect™ support mesh
connectivity across multiple locations.
Multicast & Security
Firetide infrastructure provides reliable
multicast capabilities critical for large-scale
public safety and broadband access networks.
Firetide mesh provides advanced security,
including 802.11i support, dual-layer of
FIPS140-2 certifiable 256-bit AES encryption,
digital certificates on network elements,
digitally signed firmware files, MAC based
access control lists and VLAN based access
control lists.
Flexible Configuration
Indoor and outdoor HotPort 7000 nodes
feature dual or single configurable radios
in the 2.4, 4.9 (U.S. public safety licensed
band) and 5 GHz frequency ranges. HotPort
7000 mesh can utilize channel widths of 5,
10, 20 and 40 MHz (MIMO only), with 5 and
10 MHz channel widths only available on the
4.9 GHz band.
HotPort 7000 Outdoor Mesh Node
HotView Pro™
Management
Software
Reliable Connectivity Anywhere™
HotPort® 7000 (7010/7020) Wireless Mesh Nodes
Specifications
Models
•HotPort 7010—Indoor Mesh Node*
•HotPort 7020—Outdoor Mesh Node*
* Purchase of software license(s) required for dualradio and/or 802.11n MIMO functionality
Mesh Protocol
•Firetide AutoMesh™ Protocol
HotPort 7000 Outdoor Connectors
HotPort 7000 Indoor Connectors
Security and Encryption
Outdoor Model—7020
Indoor Model—7010
•40 bit, 104 bit WEP keys
•128 bit, 256 bit AES keys
(WPA2, end-to-end data)
•MAC address filtering
•Digitally signed firmware files
•Digital certificates on nodes
Network Ports
Network Ports
•Four GigE 10/100/1000 Mbps Ethernet ports
with LEDs
•IEEE 802.3, 802.3u compliant
•CSMA/CD 10/100 autosense
Traffic Prioritization
•Three GigE 10/100/1000 Mbps Ethernet ports
with weatherproof connectors, LED activity
indicator
•IEEE 802.3, 802.3u compliant
•CSMA/CD 10/100 autosense
•Ports 2, 3 PSE Power over Ethernet per 802.3af
•Quality of Service (QoS 802.1p)
Enclosure
Wireless Interface
•IEEE 802.11a/b/g/h/n ad hoc;
3X3 MIMO with 2 streams*
* Purchase of software license required
for 802.11n MIMO functionality
•3X3 MIMO with 2 streams
•Transmit power up to 400 mW per stream
•Frequency ranges
2.412 – 2.483 GHz
4.94 – 4.99 GHz (US public safety band)
5.15 – 5.25 GHz (Indoor use only)
5.25 – 5.35 GHz
5.470 – 5.725 GHz
5.725 – 5.850 GHz
•Receive sensitivity (typical)
2.4 GHz, DSSS
1 Mbps: -95 dBm
11 Mbps: -88 dBm
2.4 GHz, OFDM
6 Mbps: -90 dBm
54 Mbps: -73 dBm
5 GHz, OFDM
6 Mbps: -90 dBm
54 Mbps: -73 dBm
•Ability to configure 5,10, 20 and
40 Mhz (MIMO only) channel bandwidth
•Dynamic Frequency Selection (DFS)
•Transmit Power Control (TPC)
Mesh Management Software
•HotView Pro™ mesh management software
(required)
Regulatory Agency Certifications
•Contact your Firetide dealer for product availability and certifications for your country
•RoHS and WEEE compliant
Warranty
•Hardware: one year limited warranty
•Software: 90 days limited warranty
•Cast aluminum NEMA-4X/IP66 enclosure
•Six type-N female antenna connectors
•Two weatherproof power connectors: AC and DC
•Three weatherproof Ethernet connectors
•System LEDs (power, status, mesh)
•Weight: 12 lbs (5.4 kg) with bracket
and sunshield
•Dimensions: 11.6" X 8.1" X 4.1"
Power
•AC Input: 100–240 VAC, 50–60 Hz, 0.9 A
•DC Input: 12 VDC ±15%, 4 A powering 2 PoE
devices; 1.7 A without PoE
•Ports 2 and 3: IEEE 802.3af compliant PoE
(PSE) consumption
Environmental Specifications
Enclosure
•System LEDs (power, status, mesh)
•Ethernet port LEDs (link, status, activity)
•Connectors: Six RPSMA female antenna,
one power, four Ethernet (RJ-45)
•Reset button (recessed)
•Weight: 2 lb 14 oz (1.3 kg)
•Dimensions 9.4" X 5.9" X 1.6"
Power
•DC Input: 12 VDC, 2.5 A
•Port 1: IEEE 802.3at compliant PoE (PD)
•External power supply: 100–240 VAC, 50/60 Hz
Environmental Specifications
•Operating temperature: 0°C to +60°C
•Storage temperature: -20°C to +70°C
•Humidity (non-condensing): 10% to 90%
•Storage humidity (non-condensing): 5% to 95%
•Maximum altitude 15,000 feet (4600 meters)
•Operating temperature: -40°C to +60°C
•Storage temperature: -40°C to +85°C
•Humidity (non-condensing): 10% to 90%
•Storage humidity (non-condensing): 5% to 95%
•Maximum altitude 15,000 feet (4600 meters)
Included Accessories
Included Accessories
Optional Accessories
•Antennas: Six 2.4 GHz and six 5 GHz,
5 dBi, indoor-rated omni directional
(included for network staging only)
•Bracket for pole and wall mounting
•External AC power cord (non-North America
power cord is separate orderable item)
•Removable sunshield
•Three weatherized Ethernet connectors for
watertight RJ-45 coupling
Optional Accessories
•Outdoor weatherized Ethernet transition cables
for use with HotPoint® access points
•Omni, directional & panel antennas
(Please see Antenna Guide)
•AC power adapter with cord (non-North America
power cord is separate orderable item)
•Antennas: Six 2.4 GHz and six 5 GHz, 5 dBi,
omni directional
•Wall or cubicle-mount bracket
Other Firetide Products
Access Points
HotPoint Indoor
& Outdoor Access Points
CPE
HotClient Indoor
& Outdoor Customer
Premises Equipment
Software
HotView Pro Network
Management Software,
Firetide Mobility
Controller, Firetide
WLAN Controller
Accessories
Antennas, Mounting
Kits, Cables, etc.
www.firetide.com
140 Knowles Drive, Los Gatos, CA 95032
Phone: +1 408-399-7771 | Fax: +1 408-399-7756 | Email: [email protected]
© 2010 Firetide, Inc. All rights reserved. Information subject to change without notice. Firetide, HotPort, and HotPoint are registered trademarks of Firetide, Inc. Reliable connectivity anywhere,
HotClient, HotView, HotView Pro, MeshBridge, and AutoMesh are trademarks of Firetide, Inc. DS018D-0610
1812 RESIDENTIAL
TELEPHONE
INTERCOM
talk
surface mount
to your front door or gate from
any telephone in your home!
control access
with a simple push of a button on
your touch-tone telephone
• Unique communication and
access control system that
allows homeowners to use
their telephone as an intercom
to speak to a guest at a front
door or gate
• System connects directly to
the homeowners existing
telephone line. No additional
monthly expenses for a
separate telephone line for the
access system
• Calls from the access system
are identified with a double
ring while regular calls use the
standard single long ring.
Homeowners know instantly if
a call is coming from their
door or gate
• Homeowners grant their guest
access by pressing 9 on their
telephone, or they can deny
access by simply hanging up
flush mount
full-duplex
Hi quality communication – the
same standard that the phone
company uses
• Built-in call waiting feature
assures that incoming calls or
guest calls are not missed
• Windows compatible autoprogramming software allows
homeowners to program the
system from their PC
• 2-year limited warranty
wall mount
three styles
to choose from; surface, wall or
flush mount designs
ACCESS CONTROL SOLUTIONS
F E AT U R E S
SYSTEM
1812 RESIDENTIAL
TELEPHONE INTERCOM SYSTEM
is a unique communication and access control device that provides homeowners with two-way
voice communication, and control of a door or gate, through their existing telephone. Visitors
are easily identified by voice communication and can be granted or denied access directly from
any telephone in the home. The Windows compatible auto-programming software, and the many
advanced features of the 1812, allow the homeowner complete control of their access system.
1
2
3
4
5
6
7
8
9
*
0
#
1
2
4
5
6
7
8
9
*
0
#
1
4
7
*
3
2
5
8
0
3
6
9
#
1Push
2 Button
3
To Call
4 5 6
7 8 9
* 0 #
Push Button
To Call
1
2
3
4
5
6
7
8
9
*
0
#
1
2
3
4
5
6
7
8
9
*
0
#
1812 Surface
1812 Flush
1812 Wall
10" W x 6.25" H x 5.25" D
254mm W x 159mm H x 133mm D
12" W x 9.25" H x 4.5" D
305mm W x 235mm H x 112mm D
10.75" W x 7.325" H x 3.5" D
273mm W x 186mm H x 88.9mm D
1812 Specs
Communication
Advanced Features
Operating Temp
True full duplex
Call waiting
10ºF to 145ºF
Hands free
Call forwarding
-12ºC to 62ºC
Three (3) preprogrammed call out
phone numbers
Optional heater kit available for colder climates
Unique ring
Electrical Requirements
Styles
Surface mount - indoor or outdoor applications
Flush mount - indoor or outdoor applications
Wall mount - indoor or outdoor applications
Multiple systems may share same phone line
Built-in clock/calendar
24 VAC, 20 VA, 250ma
UL listed power transformer provided
Do not disturb time zone
Four (4) hold-open time zones
Capacity
50 4-digit entry codes
Single line
Two relays allow control of two doors or gates
Entry code time zones
Call forwarding time zone
Programming Methods
System keypad
Touch-tone telephone
Auto program software
Flash entry code
Safety Standards
FCC (US) DUF6VT-12874-OT-0
DOC (CAN) 1736 4507 A
Complies with UL 294
ETL Listed
Special intercom mode for use with
PBX and KSU phone systems
Slave keypad can be added for entry
code access at a second door or gate
Camera Ready:
Optional B&W or Color CCTV camera*
can be added to the 1812
*may require additional CCTV equipment
Shipping Weight
Approximately 15 lbs (7 kg)
Warranty
2 year limited factory warranty
Distributed by:
®
D O O R K I N G, I N C.
120 Glasgow Avenue, Inglewood, California 90301 U.S.A. Tel: 310-645-0023 FAX: 310-641-1586 www.doorking.com
© 2007 All Rights Reserved. Product specifications may change without notice. Rev. 4/07
MEMBER:
MONITORING OF CRITICAL ENVIRONMENTS
HAS NEVER BEEN THIS SIMPLE
HEAT
COLD
HUMIDITY
WATER
HELPS PROTECT PROPERTY FROM
DESTRUCTIVE ENVIRONMENTAL CONDITIONS
EnviroAlert® monitors temperature, humidity and water in critical
environments, and activates alarms, dialers or transmitters when
programmed limits have been exceeded.
Temperature
Remote probes are available in high and low temp ranges
to accommodate any application: coolers & freezers
(grocery & convenience stores, schools, universities, etc.),
computer rooms and equipment, cell tower sites,
residential and vacation homes, etc.
M-001-0081
M-001-0082
M-001-0086
M-001-0087
ADVANCED MONITORING FOR
CRITICAL ENVIRONMENTS
Whether it is a residential or commercial application,
EnviroAlert® provides the flexibility to simultaneously
monitor temperature, humidity and/or water in one or
more critical environments (sensor probes sold
separately). With a designated output relay for each zone,
EnviroAlert® will activate alarms, dialers, transmitters, etc.
SS High Temp Thermistor Probe (32 to 299° F)
SS Low Temp Thermistor Probe (-58 to 158° F)
Waterproof Lo Temp Therm Probe (-58 to 158° F)
Waterproof Hi Temp Therm Probe (32 to 299° F)
Humidity
The EnviroAlert® will provide an actual relative
humidity reading for monitoring critical
environments: greenhouses, humidors, document
storage, computer rooms, cell tower sites,
furniture storage, etc.
Other Special Features:
M-001-0091 HAIII Humidity Sensor
• User-friendly configuration set up
• Eight event alarm memory with time and date
• Auxiliary output relay for local audible alarm
• Auxiliary alarm silence feature with 10 minute timer
Water
Minimize damage from water leaks with the
WaterBug® sensor. It is ideal for use with or around
laundry rooms, basement sump pumps, all drain
areas, computer rooms, document storage areas,
warehouses, a/c condenser trays, etc.
Each Zone Has:
• Defrost time delay up to 120 minutes
• Offset calibration adjustment
• Temperature & humidity High / Low set points
• Output relays can be configured to be initially
energized or de-energized
• Tamper-proof lock setting
M-001-0006
M-001-0009
12 VOLT DC
24 VOLT DC
EA20012
WaterBug® Surface Sensor
Under Carpet Sensor
EA20024
DUAL ZONE MONITORING WITH ON-BOARD TEMPERATURE SENSOR & INPUT
FOR ONE OPTIONAL REMOTE TEMPERATURE, HUMIDITY OR WATER SENSOR.
Dimensions
Weight
Lo & Hi Limit Adjust Range
Input Voltage
Remote sensor inputs
On-Board sensor
Unit Operating Range
Alarm Outputs
Auxiliary Audible Alarm Output
Case Material
12 VOLT DC
EA40012
24 VOLT DC
6.0” x 4.75 x 1.25
.55 lb
-58 to 299° F
EA200-12: 12 VDC @ <120mA EA200-24: 24 VDC @ <120mA
1
1
+32 to 122° F
2 - SPDT Relays (Configurable)
1 - SPDT Relays (Non-configurable)
ABS
EA40024
FOUR ZONE MONITORING WITH SIMULTANEOUS OPERATION OF ANY
COMBINATION OF REMOTE TEMPERATURE, HUMIDITY AND WATER SENSORS.
Dimensions
Weight
Lo & Hi Limit Adjust Range
Input Voltage
Number of sensor inputs
Unit Operating Range
Alarm Outputs
Auxiliary Audible Alarm Output
Case Material
6.0” x 4.75 x 1.25
.60 lb
-58 to 299° F
EA400-12: 12 VDC @ <200mA EA400-24: 24 VDC @ <200mA
4
+32 to 122° F
4 - SPDT Relays (Configurable)
1 - SPDT Relays (Non-configurable)
ABS
Made in USA
1-800-635-4269 (507) 625-7231
1950 Excel Drive, Mankato, MN 56001
www.winland.com [email protected]
D-011-0079 Rev B (11/06)
CNGE3FE7MS2
environmentally hardened managed Ethernet switch with
(7) 10/100TX + (3) configurable 10/100/1000TX / 1000FX ports
D
7+3
Description
Features
The ComNet™ CNGE3FE7MS2 Managed Ethernet Switch
provides robust transmission of (7) 10/100 BASE-TX and (3)
10/100/1000TX or 1000FX combo ports, of gigabit Ethernet
data. Unlike most Ethernet switches, these environmentally
hardened units are designed for direct deployment in
difficult out-of-plant or roadside operating environments,
and are available for use with either conventional CAT5e copper or optical transmission media. Diverse media
selection allows for easy implementation of point-to-point,
linear add-drop, drop-and-repeat, star, or true self-healing
ring and mesh network system architectures. The 7
electrical ports support the 10/100 Mbps Ethernet IEEE
802.3 protocol, and auto-negotiating and auto-MDI/
MDIX features are provided for simplicity and ease of
installation. 3 ports are 10/100/1000 configurable for copper
or fiber media for use with multimode or single mode
optical fiber, selected by optional SFP modules. These
network managed layer 2 switches are optically (1000
BASE-FX) and electrically compatible with any IEEE 802.3
compliant Ethernet devices. Plug-and-play design ensures
ease of installation, and no electrical or optical adjustments
are ever required. The CNGE3FE7MS2 incorporates
LED indicators for monitoring the operating status of the
managed switch and network. These units are DIN-rail or
wall mountable.
- Environmentally hardened for direct deployment
in difficult unconditioned out-of-plant and roadside
installations
- Tested and certified by an independent laboratory for
full compliance with the environmental requirements
(ambient operating temperature, mechanical shock,
vibration, humidity with condensation, high-line/low-line
voltage conditions and transient voltage protection) of
NEMA TS-1/TS-2 and CALTRANS Traffic Signal Control
Equipment Specifications
- Extended ambient operating temperature range:
-40˚ C to +75˚ C
- 10/100 BASE-TX and 10/100/1000 BASE-FX compatible
- Flexible optics configuration via SFP plug-in modules
- DIN rail or wall mountable mounted
- Redundant power supply compatibility reduces possibility
of single-point-of-failure for highest possible reliability
- Fully configurable through web-based or SNMP
network management
- IGMP Snooping V1/V2 for multicast filtering
and IGMP Query V1/V2
- Port based VLAN (IEEE 802.1Q)
- Rapid Spanning Tree protocol (IEEE 802.1W)
- Lifetime Warranty
Applications
- ITS Traffic Signalization & Surveillance/Incident
Detection Networks
- Industrial and Factory Automation
- Integrated IP-Video and Data Transmission Networks
- Industrial Security Access Control Systems
(SFP) = Small Form-Factor Pluggable Module
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
environmentally hardened managed Ethernet switch with
(7) 10/100TX + (3) configurable 10/100/1000TX / 1000FX ports
CNGE3FE7MS2
specifications
benefits
System Interface/Performance:
- RJ45 port support Auto MDI/MDI-X function
- SFP supports 100/1000 Dual Mode
- Store-and-Forward Switching Architecture
- Back-plane (Switching Fabric): 7.4Gbps
- 1Mbits Packet Buffer
- 8K MAC Address Table
- Wide operating temperature (-40˚C - 75˚C)
Spanning Tree
- Support IEEE802.1d Spanning Tree
- Support IEEE802.1w Rapid Spanning Tree
X-Ring
- X-Ring, Dual Homing, Couple Ring and Dual Ring Topology
- Provide redundant backup feature and the recovery time below 20ms
Support IEEE802.1ab LLDP
Power Supply
- Wide-range Redundant Power Design
- Power Polarity Reverse Protect
- Overload Current Protection
Bandwidth Control
- Support Rate-based and Priority-based rate limiting
- Broadcast/Multicast Packet Filter Control
VLAN
- Port Based VLAN
- Support 802.1 Q Tag VLAN
- GVRP
System Event Log
- System Log Server/Client
- SMTP e-mail Alert
- Relay Alarm Output System Events
Port Trunk with LACP
SNMP Trap
- Device cold start
- Power status
- Authentication failure
- X-Ring topology changed
- Port Link Up/ Link Down
QoS (Quality of Service)
- Support IEEE 802.1p Class of Service
- Per port provides 4 priority queues
- Port Base, Tag Base and Type of Service Priority
Port Mirror: Monitor traffic in switched networks
- TX packet only
- RX packet only
- Both TX and RX packet
TFTP Firmware Update and System Configure Restore and Backup
Supports 6000 VDC Ethernet ESD protection
Supports DIDO function
Security
- Port Security: MAC address entries/filter
- IP Security: IP address security management to prevent unauthorized
intruder
- Login Security: IEEE802.1X/RADIUS
IGMP
- Query mode for Multi Media Application
- Support multicast filter
Case/Installation
- IP-30 Protection
- DIN Rail and Wall Mount Design
Provides EFT protection 3000 VDC for power line
Standard Compliance
- IEEE802.3 10Base-T Ethernet
- IEEE802.3u 100Base-TX/100
- IEEE802.3ab 1000Base-T
- IEEE802.3z Gigabit fiber
- IEEE802.3x Flow Control and Back Pressure
- IEEE802.3ad Port trunk with LACP
- IEEE802.1d Spanning Tree/ IEEE802.1w Rapid Spanning Tree
- IEEE802.1p Class of Service
- IEEE802.1q VLAN Tag
- IEEE802.1x User Authentication (Radius)
- IEEE802.1ab LLDP
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal
Regulations, Subchapter J. In a continuing effort to improve and advance technology,
product specifications are subject to change without notice.
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
environmentally hardened managed Ethernet switch with
(7) 10/100TX + (3) configurable 10/100/1000TX / 1000FX ports
CNGE3FE7MS2
specifications
hardware specifications
Switch
Architecture
Back-plane (Switching Fabric): 7.4Gbps
Packet throughput ability (Full Duplex):
11 Mpps @64bytes
Transfer Rate
14,880pps for Ethernet port
148,800pps for Fast Ethernet port
1,488,000pps for Gigabit Fiber
Ethernet port
Packet Buffer
1Mbits
Mac Address
8K MAC address table
Flash ROM
4Mbytes
DRAM
32Mbytes
Connector1
10/100TX: 7 × RJ45
10/100/1000T/Mini-GBIC Combo:
3 × RJ45 + 3 × 100/1000 SFP sockets
RS232 connector: RJ45 type
DI/DO
Network Cable
Protocol
CSMA/CD
LED
10/100TX: Link/Activity (Green)
Full Duplex/Collision (Yellow)
Giga Copper: Link/Activity (Green)
Speed: 1000Mbps (Green)
SFP: Link/Activity (Green)
Power (Green), Power 1 (Green),
Power 2 (Green), Fault (Red),
Master (Green)
Reserve Polarity
Protection
Present
Overload Current
Protection
Present
Power Supply
12 - 48VDC, Redundant power with
polarity reverse protect function
and removable terminal block
Power Consumption
<6 Watts
2 Digital Input (DI): Level 0 : -30–2V
Level 1 : 10–30V
Max. input current 8mA
2 Digital Output (DO): Open collector to
40 VDC, 200mA
Operating Humidity
5% to 95% (Non-condensing)
Operating Temperature
-40˚C to 75˚C
Storage Temperature
-40˚C – 85˚C
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5
cable. EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5/5E
cable. EIA/TIA-568 100-ohm (100m)
1000Base-TX: 2-pair UTP/STP Cat. 5e
or 6 cable. EIA/TIA-568 100-ohm (100m)
Case Dimensions
Metal case. IP-30,
72mm (W) × 105mm (D) × 152mm (H)
2.84” (W) × 4.13” (D) × 5.98” (H)
Installation
DIN Rail and Wall Mount Design
EMI
FCC Class A, CE EN61000-4-2 (ESD), CE
EN61000-4-3 (RS), CE EN61000-4-4 (EFT),
CE EN61000-4-5 (Surge), CE EN55022, CE
EN61000-4-6 (CS), CE EN61000-4-8, CE
EN61000-6-2, CE EN61000-6-4
Safety
UL, cUL, CE/EN60950-1
Stability Testing
IEC60068-2-32 (Free fall),
IEC60068-2-27 (Shock),
IEC60068-2-6 (Vibration)
Optical Fiber1
Multimode: 50/125µm - 62.5/125µm
Single Mode: 9/125µm
Requires selection of sold-separately SFP Modules.
See ComNet data sheet “SFP Small Form-Factor
Pluggable Modules” for number and description of
SFP modules.
1Multimode fiber needs to meet or exceed fiber standard ITU-T G.651.
Single mode fiber needs to meet or exceed fiber standard ITU-T G.652
PART
NUMBER
DESCRIPTION
CNGE3FE7MS2
Environmentally Hardened Managed Ethernet Switch with (7) 10/100TX + (3) 10/100/1000TX / 1000FX Ports
Accessories
24VDC Plug in Power Supply, 90-264VAC, 50/60Hz (Included)
PS24-1A – 24VAC DIN Rail Power supply (sold separately)
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
environmentally hardened managed Ethernet switch with
(7) 10/100TX + (3) configurable 10/100/1000TX / 1000FX ports
CNGE3FE7MS2
specifications
software features
Management
SNMP v1, v2c, v3/ Web/Telnet/CLI/NS-View Management
IP Security
Supports 10 IP addresses that have permission to access the switch management and
to prevent unauthorized intruder.
SNMP MIB
RFC 1215 Trap, RFC 1213 MIBII, RFC 1157 SNMP MIB, RFC 1493 Bridge MIB,
RFC 2674 VLAN MIB, RFC 1643, RFC 1757, RSTP MIB, Private MIB
VLAN
Port Based VLAN
IEEE802.1Q Tag VLAN (256 entries)/
VLAN ID (UP to 4K, can be assigned from 1 to 4096)
GVRP (256 Groups)
Bandwidth Control
Support ingress packet filter and egress packet limit. The egress rate control all of
the packet types and the limit rates are 100K-250Mbps. Ingress filter packet type
combination rules are Broadcast/Multicast/Unknown Unicast packet, Broadcast/
Multicast packet, Broadcast packet only and all of packet. The packet filter rate can be
set from 100K-250Mbps.
Port Trunk with LACP
LACP Port Trunk: 4 Trunk groups/ Maximum 4 Trunk members
LLDP
Support LLDP to allow switch to advise its identification and capability on the LAN
Spanning Tree
Support IEEE802.1w Rapid Spanning Tree
Backup
Path
CNFGE3FE7MS2
X-Ring
X-Ring
CNFGE3FE7MS2 Group A CNFGE3FE7MS2 Group B CNFGE3FE7MS2
CNFGE3FE7MS2
Flow Control
Support Flow Control for Full-duplex and Back Pressure from Half-duplex
System Log
Support System log record and remote system log server
SMTP
Support SMTP Server and 6 e-mail accounts for receiving event alert
X-Ring
Support X-Ring, Dual Homing, Couple Ring and Central Ring Topology.
Provide redundant backup feature and the recovery time below 20ms.
Dual Ring can connect two rings without couple ring and supports the following topology:
CNFGE3FE7MS2
Login Security
Support IEEE802.1X Authentication/RADIUS
Dual
Ring
Relay Alarm
Provides one relay output for port breakdown, power fail.
Alarm Relay current carry ability: 1A @ DC24V
DIDO
DO: When disconnection of the specific port was detected, DO will activate the signal
LED to alarm.
DI: Integrate critical sensors: 2 groups of digital inputs. DI can integrate the sensors
into the auto alarm system and transfer the alarm information to IP network with
email and SNMP.
CNFGE3FE7MS2
Quality of Service
The quality of service determined by port, Tag and IPv4 Type of Service,
IPv4 Different Service
Class of Service
Support IEEE802.1p class of service, per port provides 4 priority queues
Port Security
Support 1000 entries of MAC address for static MAC and another 100 for MAC filter
SNMP Trap
Up to 3 Trap stations. Cold start, Port link up, Port link down, Authentication Failure, Private
Trap for power status, Port Alarm configuration, Fault alarm, X-Ring topology change.
DHCP
Provide DHCP Client/ DHCP Server and IP Relay
DNS
Provide DNS client feature and support Primary and Secondary DNS server
SNTP
Support SNTP to synchronize system clock in Internet
Port Mirror
Support 3 mirroring types: RX, TX and Both packet
IGMP
Support IGMP snooping v1, v2; 256 multicast groups and IGMP query
Firmware Update, configuration backup and restore
Support TFTP firmware update, system configure backup and restore
If Alias
Each port allows importing 128 bit of alphabetic string of words on SNMP and CLI interface.
3 CORPORATE DRIVE | DANBURY, CT 06810 | USA
T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | [email protected]
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE
T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | [email protected]
© 2010 Communications Networks Corporation. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks, LLC.
05.26.10
SPEC SHEET
NYC
MEA
Cellular and network
integration in one location
• On-board network & Plug-in Cellular Connection
allows for In Touch™ features
• Cost saving communication paths between the panel
and Central Station
• In Touch™: Email and SMS remote user control
• Flash Updateable: No more firmware chips to replace
• Adaptive Technology™ — Cost-effective supervised
cellular backup
• Provides up to 500 DMP 1100X Wireless devices
• UL Listed for Burglary, Fire, Access Control
DMP XR500 Series Command Processor™ Panels meet all
your burglary, fire, and access control needs
XR500 SERIES ACCESS/BURGLARY/FIRE
574-ZONE COMMAND PROCESSOR™ PANEL
SYSTEM FEATURES
• Select Area, All/Perimeter, or Home/Sleep/Away operation
• Up to 100 output schedules to control relays and panel
• 32 individual reporting areas, with common areas
outputs
• Up to 16 supervised door access-points and/or keypads
• Built-in phone line monitor
• 32 character names available for user, zone, area, profiles and
• Multi-lingual menus available
group names
• 1.5 Amps 12 VDC smoke and auxiliary output with OVC
• Fully supervised network and cellular communication
protection
• Communications Diagnostics check network and cellular
XR500N/XR500E SYSTEM FEATURES
communication status, cell signal strength, and email status
• On-board Ethernet
from the keypad.
• Bank, Safe and Vault Operation
• Multi-Tenant Functions provides individualized protection and
• Two Man Rule, Panic Button Test and Early Morning Ambush
control for multiple areas within a single system
• Guest operation allows up to three separate protected systems XR500E SYSTEM FEATURES
• Flexible system arming features, with Instant Arming option
• Built-in AES (Advanced Encryption Standard) Encryption
• Up to 562 two-wire smoke detector or fire-initiating zones
• NIST Certified and UL Listed Encryption
• 10,000 user codes with 99 profiles
• 12,000 event buffer
XR500 SERIES
FLEXIBLE COMMUNICATION
EIGHT COMMUNICATION
CANCEL/VERIFY
The XR500N has transitioned from dialer- PATHS
In a Home/Sleep/Away or All/Perimeter
focused communications to a true network Create, configure, and manage up to eight system, CANCEL a burglary alarm or VERIFY
and cellular communications approach by communication paths between the panel and that a valid burglar alarm has occurred.
providing stronger, multi-layered panel Central Station. Each path has its own panel Selecting VERIFY manually verifies the alarm
communications that ensure a constant link communication programming parameters, and an alarm verification message is sent to
between the panel and Central Station. and can be identified as either primary or the Central Station.
Installers have the ability to create, configure backup. This enables installers to configure a
GUEST OPERATION
and manage up to eight communication reliable communication link, offering greater
Using the Home/Sleep/Away with Guest
paths.
confidence that the panel will always be
House operation, create up to three separate
The unique DMP Serial 3 format supports connected to the Central Station.
systems (main and two guest). Keypads
16-character user, zone and area names to
in each system can selectively arm the
RECURRING MESSAGING
decrease the central station response time
perimeter, interior, or bedrooms for only their
and limit dependence on automation literal REVENUE
protected areas. Main system users can add
In Touch messages are transmitted directly
tables for message conversion. authorized users to all protected areas, but
between the panel and cell phone or
guests can add users only for their protected
NETWORK OR CELLULAR
browser with no external servers. Dealers
system.
COMMUNICATION
can offer these much-appreciated services
Built-in Ethernet Communications enhance to their customers and realize the benefits MULTI-TENANT FUNCTIONS
network options and provide Standard and of additional recurring revenue.
For commercial or multi-family residential
Encrypted Line Security. Both UDP and TCP
installations, Multi-Tenant Operation enables
CUSTOMERS STAY "IN
are supported. The network option can be
the transmission of alarms and alerts by area
used as the primary or backup path to the TOUCH™"
account number instead of system account
The DMP In Touch messaging features let
digital dialer or cellular option.
number enabling tenants and Central Stations
users send commands via text messages
T h e 4 6 3 G p l u g - i n D i g i t a l C e l l u l a r to Cellular and Network equipped panels. to identify specific zone events. Tenants
Communicator can be used as the primary Residential and commercial users can now can only silence alarms originating in their
path, providing installation flexibility where remotely control their systems. Users can protected area.
no land lines are available. Used as the arm or disarm their system, control outputs, AREAS
backup path, the 463G provides the security retrieve system status, and perform other Program up to 32 areas with a variety of
of a communication link that continues to functions. Each command received by the options, including independent arming. Each
function, even when land lines are cut or panel is acknowledged back to the user via area has a unique name and may have its own
compromised. This interface works on digital return SMS Message.
account number.
Cellular GSM/GPRS data networks over a
With In Touch features, users are informed Common areas automatically arm when the
variety of carriers in the USA and Canada.
of alarm system activity and status— The last independent area is armed and disarm
ADAPTIVE TECHNOLOGY
panel transmits Email or text messages when the first independent area is disarmed.
If a current primary communication path regarding alarms, troubles, and arming/ This is ideal for lobbies or areas where users
becomes unavailable, Adaptive Technology disarming events. The GPRS/SMS messages need common access to specific areas only.
directs the panel to make a seamless can be directed to as many as three email
transition from one communication path to addresses (up to 48 characters each) or cell DMP WIRELESS
another within milliseconds, ensuring that no phone numbers. Messaging can be configured The easily programmable
900MHz frequency-hopping
check-in or supervision messages are missed. via Remote Link™ or from the keypad.
spread-spectrum DMP 1100X Series wireless
This allows a system to be fully supervised
COMMUNICATION
FUNCTION
system features Two-way communication for
when the primary communication path is
superior operation, supervision and battery
DIAGNOSTICS
unavailable, while minimizing expensive cell
life. Two-way communication minimizes
The
enhanced
diagnostic
menu
enables
traffic when all paths are good. The panel is
repetitive signaling and helps to quickly
technicians
to
check
network
and
cellular
constantly checking the failed path to enable
identify missing transmitters. Simple keypad
communication
status,
cell
signal
strength,
the panel to revert back to the primary path
access can be used to verify that wireless
and
email
status
from
the
keypad.
when communication is restored.
device zones are in working order. The
SUPERVISED CELLULAR
1100XI, 1100XH, 1100DI, and 1100DH Wireless
COMMUNICATION
Receivers, as well as the 1100R Wireless
Add fully supervised cellular communication
Repeater are now authorized for wireless
with the CellCom Digital Cellular
Commercial Burglary applications.
Communicator. The CellComRT Remote
Communicator allows remote mounting up ACCESS CONTROL BURGLARY
to 250 feet from the panel. Panel diagnostics INTEGRATION
verify the connection between the panel The XR500 is an integrated burglary, fire and
and cellular communicator, providing a fully access control system that can be configured
supervised alarm communication path over for users to gain access and disarm the area
using a single card read!
the GSM/GPRS network.
SPEC SHEET
ZONE EXPANSION
MULTI-LINGUAL DISPLAY
THINLINE™ AND AQUALITE™
The XR500 provides up to 574 zones, OPTION
KEYPADS
programmable for burglary, fire, and access XR500 Series systems may be programmed to The stylish and sleek 7000 Series keypads
applications. The system contains eight display the User Menu and Status Display text provide three 2-button Panic keys, AC power
and Armed LEDs, 32-character display, backlit
burglary zones and two Class B 12 VDC in multiple languages.
logo and keyboard plus an internal speaker.
powered zones. Up to 64 zones are available
ENCRYPTION
Aqualite Series keypads offer a brilliant Aqua
on 16 keypad addresses and up to 100 zones
The XR500E provides encrypted data colored LCD display and backlighting.
are available on the built-in LX-Bus. Add up
transmission and is ideal for secure
to 500 zones using Expansion Modules.
environments where encrypted data is
10,000 USER CODES
required. Using AES (Advanced Encryption
Each user can be assigned to one of 99 Standard) Encryption ensures secure data
different profiles that provide access to any transmission by using a unique alphanumeric
combination of areas.
passphrase. UL Listed and NIST Certified
Encryption.
12,000 EVENT MEMORY
The Display Events feature allows users to REAL-TIME STATUS ENHANCES
view up to 2,000 stored openings and closings, 3RD-PARTY INTEGRATION
Aqualite/Thinline Keypad
zone events, user code and schedule changes Alarm systems are increasingly being
and supervisory events. Sort events by a integrated with environmental control and VALUABLE VISUAL ALARM
particular user, door, and date range. The home automation systems. With real-time INDICATOR
remaining 10,000 events detail door access status information from zones, doors, and In a normal state, both the keypad and logo
granted events separately for easy review. other outputs, XR500 Series panels are readily backlighting remain Blue on Aqualite keypads
Events may be viewed at any system keypad integrated with these third-party control and or Green on Thinline keypads. However,
during an alarm state, the keypad and logo
or uploaded to Remote Link™ software.
automations systems.
turn Red. The change in color allows persons
ONE-MAN WALK TEST
SHIFT SCHEDULES WITH
on-site to instantly recognize an alarm
A special code is also available for installers HOLIDAYS
condition.
to test the system. The One-Man Walk Test Up to four independent Shift schedules are
feature allows a single technician to check available for each of the 32 areas.
the panel response to burglary, fire, panic,
KEYPAD SHORTCUT KEYS
and supervisory zones.
Time-saving shortcut keys provide one-button
OUTPUTS
access to system control, making frequently
The XR500 provides up to 506 outputs that used functions like system arming, fast and
can be activated by zone or system events, simple. The shortcut keys enable users to
by schedule, through the User Menu or when arm, monitor zones, test, or reset the system
a card is presented. Output Groups allow and perform a variety of other functions multiple outputs to activate with a single faster and easier. Shortcut keys included are:
Red Backlighting for Alarm Conditions
event and/or can be assigned to a particular All, Reset, Home, Chime, Perim, and Sleep. user profile.
7760 CLEAR TOUCH™
ACCESS CONTROL
An attractive new user interface featuring a
OUTPUT SCHEDULES
The XR500 system can restrict access by
Achieve maximum system flexibility with schedule, arming level, or other criteria. glass touchscreen instead of traditional keys.
100 programmable schedules that simplify The specific reason for access denial can be The Blue touchscreen display turns Red for
alarm conditions. Available in White, Black or
planning and operations. Control any displayed on the keypad, stored in events,
Platinum, the 7760 adds elegance and style
contact-activated device with schedules that logged on a local printer (DMP 462P required), to any installation.
automatically regulate relays and switched- sent to the central station, and to DMP
ground outputs.
Advanced Reporting software. Anti-passback
DOOR STRIKE SCHEDULES WITH feature also available.
OVERRIDE
16 INDEPENDENT ACCESS
Specific doors may use output schedules to CONTROL DOORS
unlock during certain times of the day or Any access control reader with a Wiegand
night, or the card reader can be completely output can be connected to the XR500 Series
disabled when desired. The schedule panel. Attach card reader inputs to up to 16
override feature keeps doors locked should different locations.
the business open later or close earlier
than scheduled.
7760 Clear Touch™ Keypad
XR500 SERIES
SMOKE/HEAT DETECTORS
521B/BXT Addressable Smoke, CleanMe
NS6-100W Detector Base
521LX/LXT Addressable Smoke/Heat CleanMe
SLR-835B Conventional Smoke
SLR-835BH Conventional Smoke/Heat
POWER SUPPLIES
502-12
2 Amps @ 12 VDC
504-24 4 Amps @ 24 VDC
504-24LX 4 Amps @ 24 VDC
505-12/LX 5 Amps @ 12 VDC
505-12L 5 Amps @ 12 VDC
505-12A 5 Amps @ 12 VDC
INTRUSION DETECTORS
Sentrol® Contacts and Sensors
Optex PIRs
Potter Contacts and Sensors
Tane Contacts and Water Sensors
Virtually any other Intrusion Detectors
ACCESS CONTROL
733 or 734 Wiegand Interface Module
OP-08CB REX Motion Detector
PB-2
Request-to-Exit Button
Proximity Readers and Credentials
DMP ProxPatch
CENTRAL STATION RECEIVERS
SCS-1R Security Control Receiver
SCS-105 Single-Line DMP Serial 3 Receiver
Compatible with Central Station
Receivers that accept Standard CID,
DD, or DMP Serial 3 messaging
DMP WIRELESS
1100X Receiver
1100XI In-line Receiver
1100XH High Power Receiver
1100R Repeater
1101 Universal Transmitter,
Internal and External Contacts
1102 Universal Transmitter, External Contact
1103 Universal Transmitter, External Contact
1105 Universal Transmitter, Internal and External Contact
1114 Four-Zone Expander
1116 Relay Output
800 - 641 - 4282
LISTINGS AND APPROVALS
Refer to the XR500 Series Installation Guide (LT-0681, LT-0681CAN),
XR500 Series Programming Guide (LT-0679, LT-0679CAN) and specific
compliance listings for installation and programming requirements
necessary to meet a particular approval.
ANSI/SIA CP-01-2000 False Alarm Reduction
California State Fire Marshal (CSFM)
FCC Part 15
FCC Part 68
New York City (MEA)
NIST Validated XR500E Encrypted Command Processor Certificate #130
Underwriters Laboratories (UL) Listed
UL Bank, Safe and Vault
UL Standard Line Security
UL Encrypted Line Security
Underwriters Laboratories Canada (ULC) Listed
For additional information, visit www.dmp.com and select Compliance
INTRUSION
•
FIRE
•
ACCESS
•
NETWORKS
www.dmp.com
2500 North Partnership Boulevard
Made in the USA
S p r i n g fi e l d , M i s s o u r i 6 5 8 0 3 - 8 8 7 7
1/10
SYSTEM SPECIFICATIONS
Primary Power (included) 16.5 VAC 50 VA transformer
Secondary Power
12 VDC Battery
Models
365, 366, 367, 368 or 369
Output Rating
Bell
1.5 Amps at 12 VDC
Smoke and Auxiliary
1.5 Amps at 12 VDC
Current Draw
180mA
Enclosures:
Material
Cold-rolled steel
Model 350
17.5” W x 13.5” H x 3.5” D
(Gray or Red)
Model 350A (Gray) 17.5” W x 13.5” H x 3.75” D
Model 352X (Gray)
14.5” W x 32” H x 4.0” D
Model 341 (Gray)
12.75” W x 6.55” H x 2.9” D
DMP WIRELESS CONTINUED
1117 LED Annunciator
1118 Remote Indicator Light
1119 Door Sounder
1121 Pet Immune PIR Motion Detector
1125 PIR Motion Detector
1126C Ceiling Mount Curtain PIR
1126R 360 Ceiling Mount PIR
1126W Wide Angle Ceiling Mount PIR
1127C Wall Mount Curtain PIR
1127W Wall Mount Wide Angle PIR
1129 Glassbreak Detector
1131 Recessed Contact
1139 Bill Trap
1142 Two-Button Hold-up Transmitter
1142BC Two-Button Belt Clip Hold-up Transmitter
1145 Four-Button Key Fob
1146 Two-Button Key Fob
1147 One-Button Key Fob
1161 Residential Smoke Detector
1162 Residential Smoke/Heat Detector
1165 Commercial Smoke Detector
1165H Commercial Smoke/Heat Detector
1165HS Commercial Smoke/Heat Detector with Sounder
1181 Post Indicator Valve (UL)
1182 Outside Screw and Yoke Valve Supervisory Switch (UL)
ACCESSORIES
300 Four-wire Harness
303 Silence/Reset Push-Button
305 Plug-in Output Relay
306 Tamper Harness
307-S Screw-On Tamper Switch
3012 Clip-On Tamper Switch
335 Intrusion Siren
370 Lightning Suppressor
374 Surge Voltage Suppressor
431 Output Harness
861
Power Distribution Module
COMPUTER SOFTWARE
Remote Link Programming Software
System Link End-User Management Software
Link Server Application
Entré Access Control Software
LT-0684 © 2010 Digital Monitoring Products, Inc.
KEYPADS
7000
Series Thinline Keypads
7000A
Series Aqualite Keypads
7100
Series Thinline Keypads
7760
Clear Touch Keypad
630F LCD Remote Fire Command
ePAD™ Virtual Keypad
EXPANSION MODULES
708 Bus Extender
710/710F Bus Splitter/Repeater
711 Single Zone Expansion
712-8 8-zone Expansion
714 4-zone Class B Expansion
714-8 8-zone Class B Expansion
714-16 16-zone Class B Expansion
715 4-zone 2-wire smoke Expansion
715-8 8-zone 2-wire smoke Expansion
715-16 16-zone 2-wire smoke Expansion
716 Output Expansion,
4 Form C relays, 4 open collector outputs
717 Graphic Annunciator: 20 open collector outputs
725 4-zone Expansion, 24 VDC
736P Radionics Interface
739 X-10 Interface
INTERFACE CARDS
461 Interface Adaptor Card
462N Network Interface Card
462P Printer Interface Card
481 Expansion Interface Card
CELLULAR COMMUNICATORS
463G Plug-in Digital Cellular Communicator
CellComRT Remote Digital Cellular
Communicator
AUXILIARY MODULES
860 Relay Output Module
865 Style W/X Notification Circuit Module
866 Style W Notification Circuit Module
867 LX-Bus Notification Circuit Module
869 Style D Initiating Circuit Module
893A Dual Phone Line Module
SPEC SHEET
NYC
MEA
The most affordable
codeless arming and
disarming available —
with a slim new look!
7000 Series Thinline LCD Keypads offer
high‑quality, cost-effective security control in a
stylish, sleek new design.
• Visual and audible alarm notification
• Silence alarm while system remains armed
• Optional integrated proximity reader
• Four optional on-board fully programmable
zones
• Retrofit to any DMP panel
Enhanced Options
7063 and 7073 keypad proximity readers accept DMP
1300 Series proximity credentials.
THINLINE™ LCD KEYPADS
7060/7063/7070/7073
FEATURES
• Attractive Thinline keypad housing available in several
colors
• Large, 32-character, Liquid Crystal Display (LCD)
• Custom 16-character home or business name
• Keypad and logo backlighting turns Red in alarm conditions
• User-adjustable brightness, tone, and volume controls
• Supports Cancel/Verify™ feature
• Built-in diagnostics for ease of service
• Simple harness connection to 4-wire keypad bus
• Connect devices directly to keypad zones
• View system events/user activity through keypad display
• AC power and Armed LED
• Suitable for access, burglary, and fire applications
• Distinct fire, burglary, zone monitor, and prewarn tones
• Displays time of day, armed zones, and armed areas
• Optional backboxes for conduit or wall-mount applications
• Unique silence feature allows the user to silence alarm
bells and still keep the system armed
• Compatible with all DMP panels
THINLINE™ KEYPADS
VERSATILE SUPERVISED AND
UNSUPERVISED OPERATION
When programmed for supervised
operation, the keypad occupies its own
unique device address on the keypad
data bus.
Unsupervised operation allows you to
install an unlimited number of keypads
set to the same device address. Increasing
the number of keypads allows maximum
system operating flexibility.
USER-FRIENDLY MENU
FUNCTIONS
The User Menu allows you to quickly
browse through menu options. Disarming
and Arming functions are fast and
easy. Any function allowed by the user
authority level is simply accessed through
the keypad, such as silencing alarms,
resetting sensors, or displaying events.
2-BUTTON PANIC KEYS
The top row of keys can be used as
2‑button panic keys. The user simply
presses and holds two of the keys
simultaneously to send either a panic,
non-medical emergency, or fire report
to the Central Station.
KEYPAD SHORTCUT KEYS
Keypad shortcut keys are provided to
simplify operation and allow the user to
more quickly arm, check in, monitor, exit,
or reset the system. One-button arming
creates the simplest keypad available.
Use the one-button shortcut keys for
common functions, or use the ATM style
menu for advanced functions, whichever
method meets the user’s needs or level
of expertise with the system.
END-USER CONTROL
Each of the Thinline Series keypads
provides a simple User Options menu
for adjusting brightness, speaker tone,
and volume.
VALUABLE VISUAL ALARM
INDICATOR
In a normal state, both the keypad
and logo backlighting remain Green.
However, during an alarm state, the
keypad and logo turn Red. The change in
color allows persons on‑site to instantly
recognize an alarm condition.
Top Row Select Keys
Police Emergency
Fire
Label shows Icons only
Panic Key Labels
CANCEL/VERIFY™
In a Home/Sleep/Away or All/Perimeter
system, you can CANCEL a burglary alarm
or VERIFY that a valid burglar alarm has
occurred. Selecting VERIFY manually
verifies the alarm and sends an alarm
verification message to the central
station.
Red Backlighting
Green Backlighting
DISTINCT SOUND PATTERNS
The keypads also provide distinct sound
patterns for fire, burglary, zone monitor,
and prewarn that can help users identify
the event occurring on their system.
RETROFIT ANY EXISTING
DMP SYSTEM
Retrofitting is quick and easy. Thinline
keypads have the same footprint as
existing DMP keypads and mount in
currently installed backboxes. Thinline
Series keypads require no special modules
or panel upgrades. You can provide a new
look and greater functionality to an
existing system at just a fraction of the
cost of all new equipment.
MULTIPLE-KEYPAD SAVINGS
Install multiple keypads on the same
wire run. Compatibility and cost savings
make the Thinline Series an asset in every
installation.
OPTIONS
The Thinline Series keypads also provide
Keypad Options and Keypad Diagnostics
menus available only to system installers
and service technicians. Enter Keypad
Options to set the keypad address and
change the default keypad message.
Test the keypad operation at any time
without disabling the system. The
diagnostics program tests the LCD
segments and backlighting, each of the
16 keyboard keys, and the four zones on
the 7070 and 7073 keypads.
SPEC SHEET
UNIVERSAL PROGRAMMING
TOOL
System installation and programming
can be achieved without carrying
around or purchasing expensive external
programmers since panel and add-on
module programming is integrated into
DMP Keypads.
Individually program panels, an iCOM
Network Alarm Router, iCOMSL Network
Alarm Communicator, and other
programmable add-on modules directly
from the keypad.
7070/7073 FOUR EXPANSION
ZONES
Zone expansion is available right on the
keypad where you need it the most. The
four expansion zones on the 7070 and
7073 models are fully programmable
Class B protection zones that can be used
for a variety of fire, burglary, and access
control applications.
ZONE TYPE SELECTION
Keypad zones can be programmed using
the same zone types available on the
panel. Select supervised, unsupervised,
night, fire, panic, exit, and emergency
operation depending on the user
requirements.
ZONE DEVICE CHOICES
Connect PIRs, door and window contacts,
pull stations, sprinkler tamper switches,
and silent panic buttons. Plan the
installation to afford the best coverage
while eliminating potential problems
associated with multiple wire runs.
7063/7073 CODELESS ARMING
AND DISARMING
The innovative 7063 and 7073 Thinline
keypads contain an on-board DMP
proximity reader that allows users
to simply present their proximity
credentials to the keypad to gain access
to a protected area.
7073 SOFT-SHUNT®
MOMENTARY BYPASS
To provide an entry and exit window
on systems with 24-hour perimeter
protection, DMP offers the
Soft-Shunt® feature. Soft-Shunt allows
the user enough time to enter or exit the
area. If the door remains open when the
timer expires, a zone open/short is sent
to the panel for the keypad Zone 2.
REQUEST-TO-EXIT (REX)
To enable easy user exit from an area,
connect a motion sensing or mechanical
device to Zone 3 on the keypad. As the
user trips the zone, the keypad activates
the door strike allowing the user to exit
the area without presenting a card or
entering a user code.
PRIVATE LABELING
DMP offers dealers the option to present
their company logo on the 7000 Series
keypads. The logo displays on the rubber
logo insert and replaces the DMP logo.
The backlighted logo glows Green during
normal operation and turns Red in an
alarm state.
Logo Location
Place Your
Logo Here
KEYPAD MODEL FEATURES
Model
2-Button Panic
Red in Alarm
4-Zones
7060
X
X
7063
X
X
7070
X
X
X
7073
X
X
X
Internal Prox Reader
Wiegand Input
Internal Form C
Door Strike Relay
X
X
X
THINLINE™ KEYPADS
KEYPAD ACCESSORIES
Backboxes
695
Keypad Conduit Backbox
696
Keypad Backbox
Keypad Wiring Harness
300
4-wire harness
300-5
5-wire harness
300-12
12-wire harness
300-512
12-wire harness, 5 ft. long
Proximity Credentials
1306
Prox Patch™
1306PW
Prox Patch™
1326
ProxCard II® Card
1346
ProxKey II® Access Device
1351
ProxPass®
1386
ISOProx II® Card
External Proximity Readers
PP-6005B ProxPoint® Plus Proximity Reader
MP-5365 MiniProx™ Proximity Reader
PR-5455 ProxPro® II Proximity Reader
MX-5375 MaxiProx® Proximity Reader
TL-5395
ThinLine II® Proximity Reader
7060-W
7063-W
7070-W
7073-W
7060-I
7063-I
7070-I
7073-I
SPECIFICATIONS
Operating Voltage
Dimensions
Display Type
Colors
12 VDC
7” W x 5.25” H x 0.5” D
LCD
White, Ivory, Black
COMPATIBILITY
7000 Thinline Series keypads are compatible
with all DMP panels. Thinline keypads are not
available in a Fire Keypad Variation.
CURRENT DRAW
7060 Standby
72mA
Alarm
87mA
7063 Standby
85mA
Alarm
100mA
7070 Standby
72mA + 1.6mA per active zone
Alarm
87mA + 2mA per active zone
7073 Standby
85mA + 1.6mA per active zone
Alarm
100mA + 2mA per active zone
800 - 641 - 4282
LISTINGS AND APPROVALS
California State Fire Marshall (CSFM)
FCC Part 15 ID: CCKPC0086
Industry Canada ID: 5251A-PC0086
New York City (MEA)
Underwriters Laboratory (UL) Listed
ANSI/UL 294
Access Control System Units
ANSI/UL 365
Police Connected Burglar
ANSI/UL 609
Local Burglar
ANSI/UL 1023
Household Burglar
ANSI/UL 1076
Proprietary Burglar
ANSI/UL 1610
Central Station Burglar
ANSI/UL 985
Household Fire Warning
ANSI/UL 864
Fire Protective Signaling 9th Edition (7070,7073)
For additional information, access www.dmp.com and select
Compliance.
INTRUSION
•
FIRE
•
ACCESS
•
NETWORKS
www.dmp.com
2500 North Partnership Boulevard
Made in the USA
S p r i n g fi e l d , M i s s o u r i 6 5 8 0 3 - 8 8 7 7
4/09
7060-B
7063-B
7070-B
7073-B
LT-0777 © 2009 Digital Monitoring Products, Inc.
KEYPAD ORDERING INFORMATION
The Thinline Series keypads are available in White, Ivory or
Black to complement any decor. Select from the following
options:
SPEC SHEET
iCOM™ ROUTERS —
SIGNALING THE FUTURE
Lightning-fast, supervised secure Network Monitoring
is yours with iCOM Routers from DMP — the leader in
Network Monitoring.
• Fast, secure network communications
• Full supervision of LAN/WAN/Internet
communication
• Exceeds UL requirements for
UL AA High Line Security and
UL 864 Fire Protective Signaling
• No phone lines required
WHY iCOM
iCOM technology is quickly becoming the standard
for monitoring retail chains, government facilities,
financial institutions, school systems, as well as
commercial and residential installations. Communicate
via your Network and Voice Over Internet Protocol
(VoIP) connection for fast, high quality, low cost
monitoring.
iCOM TECHNOLOGY ALARM ROUTERS —
iCOM™ / iCOM-E™ / iCOMSL™
STANDARD FEATURES ON ALL iCOM MODELS
• Programming via DMP LCD Keypad, laptop or PC
• TCP/IP addressing or DHCP for dynamic IP addressing
• Provides constant network communication path supervision
between the panel and receiver
• Supports full DMP Serial 3 format to SCS-1R Receivers
• Easily installs in panel enclosure using universal
edge‑mounting or 3-hole pattern
• Remote panel programming over the network
• Average UDP message size of 63 bytes has minimal impact
on network bandwidth
• Flash-updateable ROM
• Uses the panel auxiliary power output, eliminating the
need for an external power supply
• UL Listed
• Designed and manufactured in the U.S.A.
SIGNALING FEATURES
• Supervision between premise and alarm equipment is
managed by the SCS-1R Central Station Receiver
• Messages transmitted via UDP protocol, as required by UL,
guard against certain denial-of-service attacks
• The SCS-1R Receiver and iCOM Routers can accommodate
2500 supervised accounts with a single network line-card
• Message authentication
• Task specific panel-to-receiver communication technology
eliminates the need for additional computers and servers
• Primary and secondary target IP addresses for backup
central station receiver
iCOM NETWORK ROUTERS
ON-BOARD STATUS LEDS
Multiple on-board status LEDs help users
determine when the unit is transmitting
data to and receiving data from the
panel. Additional LEDs verify network
activity and that network communication
is in a normal condition.
LINK MULTIPLE STORES,
BRANCHES OR AGENCIES
Use iCOM Technology for supervised
central station monitoring without the
expense of leased lines, toll charges, or
radio towers. Network multiple sites via
company LAN/WAN or the internet for
monitoring and remote programming.
iCOM-E FEATURES
• Adds 128-bit Rijndael encryption to
the standard iCOM features
• Compatible with the XR100/XR500
Command Processor panels
• Meets U.S. Government Advanced
Encryption Standards (AES)
• NIST validated and UL listed for
encryption
• Accepts encrypted and non‑ encrypted signals when installed in
an SCS-1R receiver
• Use in high-security environments
and Sensitive Compartmentalized
Information Facility (SCIF)
applications
iCOM TECHNOLOGY
ONBOARD
XR500N, XR500E, and XR2500F panels
now ship with iCOM Technology onboard
so your system is network ready right out
of the box.
iCOM/iCOM-E SPECIFICATIONS
Primary Power 12 VDC
Current Draw 78.1mA
Dimensions
0.75" x 3" x 5.5"
iCOMSL SPECIFICATIONS
Primary Power 12/24 VDC
Current Draw 80mA
Dimensions
0.75" x 3" x 5.5"
iCOMSL FEATURES
• Network slave-communicator
• Compatible with DMP panels and ANY
manufacturer's panel
• Six inputs/Six outputs/Nine
programmable Zone Types
• Input Mode allows iCOMSL use in
stand-alone applications
• Keypad Mode allows full DMP Serial 3
communication from XRSuper6, XR20
and XR40 Command Processor panels
• UL Listed for High Line Security (UL
AA) as a slave communicator for any
UL Listed commercial burglar alarm
panel
• UL listed for Commercial Fire without
additional phone lines
iCOMSL CONFIGURATIONS
• iCOMsl-XR/AA: Provides UL AA High
Line Security network communication
for DMP XRSuper6M, XR20M, or
XR40M Command Processor™ Panels.
• iCOMsl-12V/AA: Provides UL AA
network communication for non-DMP
12 VDC commercial burglary panels. •iCOMsl-XR5/NACT: Provides 12
VDC network communication
for DMP XR5FC FACP (Fire Alarm
Control Panel) panels.
• iCOMsl-12V/NACT: Provides 12 VDC
network communication for non-DMP
FACP installations.
• iCOMsl-24V/NACT: Provides 24 VDC
network communication for non-DMP
FACP installations.
SOFTWARE OPTIONS
Remote Link Remote Programming
System Link End-User Management
Link Server Remote Link Server Database Option
Link Add-on Modules
LISTINGS AND APPROVALS
Refer to the iCOM Installation Guide (LT-0587), iCOM-E Installation
Guide (LT-0587), and iCOMSL Installation Guide (LT-0631) and specific
compliance listings for installation and programming requirements
iCOM/iCOM-E PANEL COMPATIBILITY
necessary to meet a particular approval.
XR100/XR500 Series and XR2500F
iCOM/iCOM-E/iCOMSL
iCOMSL PANEL COMPATIBILITY
Underwriters Laboratories (UL) Listed
ALL DMP Command Processor panels and/or any
UL AA High Line Security
manufacturer's alarm panel.
California State Fire Marshal (CSFM)
ACCESSORIES
FCC Part 15
462N
Network Interface Card
For additional information, access www.dmp.com and select
SCS-101 Network interface for SCS-1R Receiver
Compliance.
396
PC to iCOM/iCOM-E Programming Cable
iCOM-E
397
RS-232 DB-9 Cable (XR500 Series)
UL Encrypted High Line Security
350B
3-hole pattern mounting plate (Slide-in)
NIST AES Algorithm Certificate #66 for iCOM-E only. See
350D
3-hole pattern mounting plate (Snap-in)
http://csrc.nist.gov/cryptval/aes/aesval.html
800 - 641 - 4282
INTRUSION
•
FIRE
•
ACCESS
•
NETWORKS
www.dmp.com
2500 North Partnership Boulevard
Made in the USA
S p r i n g fi e l d , M i s s o u r i 6 5 8 0 3 - 8 8 7 7
8/09
SIMPLE PROGRAMMING
Program by using any DMP LCD keypad,
a laptop, or PC using the Hyperterminal
program already on your computer.
No additional software is needed for
programming.
iCOM FEATURES
• Provide s Net work M on it orin g™
capability to the XR500 Command
Processor™ panel when using a 462N
Interface Card
• XR500N Series and XR2500F panels
also provide optional on-board RS-232
Network connections
LT-0864 © 2009 Digital Monitoring Products, Inc.
EASY INSTALLATION
Easily install any iCOM Network Router
in the panel enclosure by simply
snapping into the enclosure using the
3-hole pattern or use the universal
edge‑mounting option. All iCOM Routers
are powered by the panel, so external
power supplies and additional batteries
are things of the past.
SPEC SHEET
DMP Smart Devices
Ensure Message
Acknowledgement
Providing Double the System Security
Two-Way Supervised Wireless from DMP delivers unparalleled
flexibility and simplicity without sacrificing power.
•
•
•
•
Built-in device testing
Simple programming
Superior range
Seamless integration with DMP panels and other
hardwired devices
Whether the installation is new construction, an upgrade or
retrofit, Two-Way Wireless from DMP gets the job done faster
with less effort.
DMP 1100 SERIES
WIRELESS TRANSMITTERS
SYSTEM FEATURES
•
•
•
•
Two-Way supervised communication
Built-in Survey LED visually confirms communications
Extended range and battery life
3, 60 or 240-minute supervision window; selectable by zone
or output to maximize effectiveness
• Frequency-hopping 900MHz Spread-Spectrum technology
• Attractive and durable plastic housing for all units
TRANSMITTER FEATURES
•
•
•
•
Internal case tamper for added security
Programmable from panel keypad or via Remote Link™
Selectable communication test intervals
User-replaceable 3.0V Lithium batteries
1100 SERIES TRANSMITTERS
•1101/1102/1103/1105 Universal Transmitters (UL)
•1114 Four-Zone Expander
•1116 Relay Output
•1117 LED Annunciator
•1118 Remote Indicator Light
•1119 Door Sounder
•1121 PIR Motion Detector
•1125 PIR Motion Detector with Lens Adjustments (UL)
•1126C/1126R/1126W Ceiling PIR Motion Detectors
•1127C/1127W Wall Mount PIR Motion Detectors (UL)
•1129 Glassbreak Detector
•1131 Recessed Contact
•1139 Bill Trap
•1142/1142BC Two-Button Panic Transmitters (UL)
•1145/1146/1147
Key Fob Transmitters
•1161/1162
Residential Smoke Detectors (UL)
•1165/1165H/1165HS Commercial Smoke Detectors (UL)
•1181 Post Indicator Valve (UL)
•1182 Outside Screw and Yoke Valve
Supervisory Switch (UL)
DMP 1100 SERIES TRANSMITTERS
TWO-WAY
1102 UNIVERSAL TRANSMITTER
1116 RELAY OUTPUT
COMMUNICATION
Model 1102 Universal Transmitter provides The 1116 Relay Output provides a Form C
Superior to traditional wireless
the same look and reliability of the 1101 (SPDT) dry relay contact rated for 1 Amp @ 30
equipment that just broadcasts
without an internal contact. Simply connect VDC. Program the 1116 with a slow or fast
the signal, DMP 1100 Series transmitters any Normally Open or Normally Closed response time to fit your application.
require an acknowledgement from the contact to the 1102 Transmitter two-wire
1117 LED ANNUNCIATOR
wireless receiver, indicating successful terminal block.
The 1117 LED Annunciator provides one
communication. This smart technology
remote LED that can be used to visually
ensures that each and every communication
notify the user about conditions such as
is received and efficiently processed at the
armed area annunciation, ambush alarm,
panel.
burglary alarm, exit timer, entry timer,
900MHz SPREAD-SPECTRUM
schedules, or communication failure.
TECHNOLOGY
DMP wireless communication employs
900MHz frequency-hopping spreadspectrum to ensure clear and accurate
1101/1102/1103
signal transmissions without interference
1103 UNIVERSAL TRANSMITTER
in practically any environment.
Model 1103 Universal Transmitter is typically
INCREASED SECURITY
used in commercial fire or burglary door/
DMP wireless receivers supervise for window applications. It offers the same look
1117/1118
transmitters that go missing. With Two-Way and features as the 1101 transmitter, with
communication, each wireless transmitter the addition of a 470k end-of-line resistor
1118 REMOTE INDICATOR LIGHT
communicates with the receiver using and wall tamper switch.
The 1118 Remote Indicator Light provides
supervision messages. Each transmitter
one remote LED indicator for XR100 and
can be programmed for no supervision or 1105 UNIVERSAL
XR500 Series Panels that visually indicates
a 3, 60, or 240 minute window providing TRANSMITTER
flexibility and allowing increased security The 1105 Universal Transmitter is less than when a panic alarm has been activated.
for those applications that require shorter half the size of 1101/1102 series, providing Install in a break room, storage area, or
for more mounting options and more anywhere not visible to the teller line or
supervision times.
lobby where a notification LED could be
discrete placement.
When the receiver does not receive any
used.
supervision messages from the transmitter This 2-input transmitter is typically used
for the programmed window of time, for door/window applications. The internal 1119 WIRELESS SOUNDER
the receiver reports the zone or output and external contacts can be programmed This single-zone sounder serves as both a
as missing to the panel for display and to operate at the same
burglary and audible alert device, sending a
time, providing two
reporting to the Central Station.
signal to the panel while creating an audible
independent zones from
tone. In retail/commercial applications,
EXTENDED BATTERY LIFE
one transmitter.
it provides a lower-cost alternative to
Programming each wireless device with
sounders available as an add-on with crash
a specific communication test interval 1114 FOUR-ZONE EXPANDER
bars. Connecting the zone input to a door
eliminates wasteful, repetitive signaling. The 1114 Four-Zone Expander increases the contact allows it to trigger the sounder
By eliminating multiple rounds of repetitive number of reporting zones available on DMP immediately.
signals, Two-Way communication extends panels. The four zones can be used with
burglary and non-powered devices.
battery life.
1121 PIR MOTION DETECTOR
The Model 1121 PIR (Passive Infrared)
SIMPLE PROGRAMMING
Motion Detector with Pet
No special equipment is needed to program
Immunity is suitable for
the system! Assign wireless transmitters to
most residential or small
zones or outputs during panel programming
commercial applications.
with Remote Link™ or from the keypad.
With a generous coverage
area of 90° 50' X 50', the
1101 UNIVERSAL TRANSMITTER
1121 is a favorite among
The Model 1101 Universal Transmitter
security professionals.
provides Internal and External contacts
1114/1116
that may be used at the same time to yield
TWO individual reporting zones from one
transmitter. This functionality makes the
1101 perfect for applications where a door
and window (or any type of N/O or N/C
contact) are in close proximity.
SPEC SHEET
1131 RECESSED CONTACT
1125 PIR MOTION DETECTOR
1161 & 1162 RESIDENTIAL
Suitable for almost any application, the The 1131 Wireless Recessed Contact provides SMOKE DETECTORS
Model 1125 PIR Motion Detector includes a concealed protection for doors, windows, or The Model 1161 Smoke Detector with
variety of lens configuration options. Use any other application needing a discreet Sounder, and 1162 Smoke/Heat Detector
curtain masks to ensure contact. The on-board LED provides built-in with Sounder are wireless detectors for
proper focus for maximum survey capability to allow for single-person residential applications.
security throughout the installations, eliminating the requirement
Model 1162 also offers a
protected space. Select for an external survey kit. The 1131
built-in fixed and ratethe Bi‑Curtain or Standard transmits Normal, Alarm, and Low Battery
of-rise heat detector.
mode operation depending conditions.
The fixed temperature
on the sensitivity required
function responds to the
for the application. Also
135° temperature setting
select a 33’ x 33’ or
and the rate‑of‑rise function detects and
50’ x 50’ coverage area
responds to a rapid temperature increase.
to ensure no space is left
When tripped, either function sends an
unprotected.
1139 BILL TRAP
alarm to the panel.
Designed to provide a silent alarm option
1126 SERIES PIR MOTION
for cash drawer operators, the 1139 holds DEVICES FOR USE WITH THE
DETECTORS
XR100/XR500 USING THE
The 1126 Series PIR Motion Detectors are a trapped bill below a stack of bills. When
1100X OR 1100XH RECEIVER
the
trapped
bill
is
removed,
a
panic
alarm
compact wireless motion
1165/1165H/1165HS, and 1181/1182.
is
sent
to
the
receiver.
sensors. Offering a 360°,
To reduce the possibility of a false alarm, 1165/1165H/1165HS
Spot, Curtain, or Wide
a programmable delay can provide time to COMMERCIAL SMOKE
Angle version makes the
replace the bill should it be accidentally DETECTORS
1126 Series flexible for a
removed.
variety of ceiling mount
The Model 1165 Smoke Detector, 1165H
applications. To save
Smoke/Heat Detector, and 1165HS Smoke/
battery life, select YES for Disarm Disable
Heat Detector with Sounder include a
in Zone Programming. This allows the 1126
tamper switch that sends a trouble signal if
PIR to be disabled for Night and Exit type
the detector is removed from the mounting
zones while the area is disarmed.
base.
1127 WALL-MOUNT 1142 & 1142BC TWO-BUTTON
1181 POST INDICATOR VALVE
HOLD-UP TRANSMITTER
PIR MOTION
The model 1181 PIV is a weather proof
The Model 1142 and 1142BC Two-Button and tamper resistant
DETECTOR
The 1127C curtain PIR covers Hold-up transmitters are typically used as w i r e l e s s s w i t c h
a 50-foot detection area a panic alarm, but with a little imagination for monitoring the
using a Fresnel lens. The this transmitter can be used for a multitude open position of fire
1127W wide-angle PIR covers of applications.
sprinkler control
Use the optional belt values of the post
a 36-foot by 84-degree angle
clip and attach the indicator, butterfly and other types.
area using a Fresnel lens, with pet immunity
1142BC to your pocket
up to 40 pounds. Both versions exhibit
or belt for local mobile 1182 OS&Y
excellent R.F.I. and noise immunity, and
p r o t e c t i o n . The 1182 OS&Y Switch is used to monitor
include a case tamper.
Permanently mount the 1142 in an under- the open position of an OS&Y (Outside Screw
1129 GLASSBREAK DETECTOR
the-counter location with the included and Yoke) type gate valve. The 1182 mounts
conveniently to most OS&Y valves ranging in
Designed to detect the shattering of framed screws for UL installations.
size from ½” to 12”. The switch operates the
glass mounted in an outside wall, this sensor
external contacts of the wireless transmitter
is also suitable for armor-coated glass. The KEY FOB TRANSMITTERS
360° microphone can detect through blinds The 1100 Series Key Fob transmitters are when the valve position is altered from an
and light drapes within a 12’ range and also portable, water resistant, and designed to open state.
recognizes the “quiet break” favored by be clipped to a keychain or lanyard. The key
fob LED provides visual acknowledgement
experienced intruders.
when a button is pressed
Ideal where hardwired acoustic sensors are and responds to each
impractical, the 1129 incorporates Pattern separate operation with
Recognition Technology™ to ignore most specific color‑ coded
false alarm sounds.
LED status displays.
1145 Key Fob 4‑button
1146 Key Fob 2-button
1147 Key Fob 1-button
DMP 1100 SERIES TRANSMITTERS
GENERAL SPECIFICATIONS
Frequency Range 903-927 MHz
Flame-retardant ABS constructed housings.
Battery Life Expectancy based on normal operation.
1101/1102/1103 TRANSMITTER SPECIFICATIONS
Battery Life Expectancy
5 years
Dimensions
Transmitter Case
3.3” L x 1.6” W x 1.2” H
Mounting Bracket
2.5” L x 1.3” W x 0.1” H
(1101/1102 only)
Magnet Housing
1.5” L x 0.5” W x 0.7” H
1105 TRANSMITTER SPECIFICATIONS
Battery Life Expectancy
5 years
Dimensions
Transmitter Case
1.75” L x 1.6” W x 0.79” H
Standard Magnet Housing 1.35” L x 0.375” W x 0.425” H
Commercial Magnet Housing2.25” L x 0.375” W x 0.34” H
1114/1116/1117/*1118
Battery Life Expectancy
1114
1116/1117/1118
Dimensions
SPECIFICATIONS
3 years
5 years (Slow Response)
4.65” L x 3.1” W x 1.4” H
1119 SPECIFICATIONS
Battery Life Expectancy
2 ½ Years (Slow Response)
3 Months (Fast Response)
Dimensions
4.65” L x 3.1” W x 1.4” H
1121 PIR SPECIFICATIONS
Battery Life Expectancy
3 years
Dimensions 4.8” L X 2.5” W X 1.45” H
Detection Range 90° 50 x 50 feet
Mounting height 4.9 to 8.2 feet
1125 PIR SPECIFICATIONS
Battery Life Expectancy
7 years using 3 batteries
Dimensions 5.1” L X 2.9” W X 2.2” H
Detection Range Up to 50 Feet (15.2 M)
1126 SERIES PIR SPECIFICATIONS
Battery Life Expectancy
3 years
Dimensions 4.0” Dia x 2” H
Mounting height 6.5 to 18 feet
1127 WALL-MOUNT PIR SPECIFICATIONS
Battery Life Expectancy
5 to 7 years
Dimensions 2.7” W x 1.77” D x 4.33” H
Mounting height 8 feet
1129 GLASSBREAK SPECIFICATIONS
Battery Life Expectancy
3 years
Dimensions
4.25” L x 3.15” W x 1.75” H
Microphone
Omnidirectional Electret
1131 SPECIFICATIONS
Battery Life Expectancy
5 years
Dimensions Housing
4.175” L X .55” DIA
Housing Flange
1.7” L X .80” W
Magnet Housing
0.7” L X .55” DIA
1139 BILL TRAP SPECIFICATIONS
Battery Life Expectancy
1 year using 2 batteries
Dimensions
5.375” H x 2.625” W x .625” D
1142/1142BC TRANSMITTER SPECIFICATIONS
Battery Life Expectancy
5 years
Dimensions
Transmitter Case 3.3” L x 1.6” W x 1.2” H
Belt Clip
1.9” L x 0.9” W x 0.3” H
1145/1146/1147 KEY FOB SPECIFICATIONS
Battery Life Expectancy
2 years
Dimensions 1.98” H x 1.98” W x 0.6” D
*1161/1162/1165/1165H/1165HS DETECTOR
SPECIFICATIONS
Battery Life Expectancy
1 year
Dimensions
Detector
5.6” x 2.4”
Base
5.4” x 0.46”
Temporal Sounder Pattern 85 dB at 10’
Sensitivity
2.3% ±0.8%
*1181/1182 VALVE MONITOR SPECIFICATIONS
Battery Life Expectancy
5 years
Dimensions
1181
4.75” L x 2.25” W x 5.08” H
1182
6.19” L x 2.25” W x 5.88” H
Frequency Range
903-927 MHz
Operating Range
-10° F to 120°F
800 - 641 - 4282
INTRUSION
•
FIRE
•
ACCESS
•
NETWORKS
www.dmp.com
2500 North Partnership Boulevard
Made in the USA
S p r i n g fi e l d , M i s s o u r i 6 5 8 0 3 - 8 8 7 7
2/10
LISTINGS AND APPROVALS
Industry Canada ID
*Compatible with only the XR100/XR500 Series Command Processor™ 5251A-PC0081 1101, 1102, 1103, 1129, 1142, 1181, 1182
5251A-PC0101 1114, 1116, 1117, 1118
Panels:
5251A-PC0123 1119
1165, 1165H, 1165HS, 1181, 1182
5251A-PC0124 1105
ACCESSORIES
5251A-PC0109 1126, 1127C, 1127W, 1131
CR123
3.0V Lithium Battery
5251A-PC0098 1145, 1146, 1147
CR123-FIRE 3.0V Lithium Battery (for commercial fire devices)
5251A-PC0088 1121, 1125, 1161, 1162, 1165, 1165H, 1165HS
CR2032
3.0V Coin Cell Lithium Battery
Underwriters Laboratories (UL) Listed
(1145/1146/1147 only)
ANSI/UL 1023
Household Burglar Alarm System Units Accessory
CR2450
3.0V Coin Cell Lithium Battery (1139 only)
1101 1102 1103 1105 1125 1127C 1127W 1142/1142BC
CR12600
3.0V Lithium Battery (1131 only)
ANSI/UL 636
Holdup Alarm Units and Systems Accessory
CR17450
3.0V Lithium Battery Pack (1126 Series only)
1103 1142
376
DC Plug-in Power Supply
ANSI/UL 634
Connections and Switches for use with Burglar (1114/1116/1117/1118 only)
Alarm System Accessory
378
Barrel Connector with Cord
1101 1102 1105
(1114/1116/1117/1118 only)
ANSI/UL 639
Intrusion Detection Units Accessory
1125 1127C 1127W
PATENTS
ANSI/UL 985
Household Fire Warning System Accessory
U.S. Patent No. 7,239,236
1101 1102 1105
LISTINGS AND APPROVALS
ANSI/UL 365
Police Station Connected Burglar
California State Fire Marshal (CSFM)
1103
1101 1102 1105 1161 1162 1165 1165H 1165HS 1181 1182
ANSI/UL 609
Local Burglar Alarm Units and Systems
FCC Part 15 Registration ID
1103
CCK1101
1101, 1102, 1103, 1129, 1142, 1181, 1182
ANSI/UL 1076
Proprietary Burglar Alarm Units
CCKPC0088
1121, 1125, 1161, 1162, 1165, 1165H, 1165HS
1103
CCKPC0109
1126, 1127C, 1127W, 1131
ANSI/UL 1610
Central Station Burglar Alarm Units
CCKPC0098
1145, 1146, 1147
1103
CCKPC0101
1114, 1116, 1117, 1118
ANSI/UL 346
Waterflow Indicators for Fire Protective Signaling Systems
CCKPC0123
1119
1181 1182
CCKPC0124
1105
ANSI/UL 268
Smoke-Automatic Fire Detectors
1161 1162 1165 1165H 1165HS
LT-0977 © 2010 Digital Monitoring Products, Inc.
COMPATIBILITY
XT Series and XR100/XR500 Series Command Processor™ Panels
CCTV | REG‑L1 License Plate Cameras
REG‑L1 License Plate Cameras
▶ High speed capture to 160 km/h (100 mph)
▶ 24/7 Capture in day and dark conditions
▶ Advanced Ambient Rejection Technology
▶ Energy efficient operation at 12 to 24 VAC/VDC
▶ Compact housing, installer friendly design
REG‑L1 integrates advances in optics, electronics, IR
illumination and Ambient Rejection Technology to deliver
consistent, reliable number plate capture in the most
challenging of conditions
With an operational range of up to 30 m (100 ft) or 25 m
(80 ft) depending on number plate size, REG-L1 delivers
high contrast number plate images across the complete
spectrum of ambient lighting conditions, from total
darkness to direct glare from sunlight and vehicle
headlights. The camera can capture clear plate images from
vehicles moving at speeds of up to 160 km/h (100 mph)
enabling effective capture on motorways, highways and in
other high speed applications.
The unit housing is weather-sealed and field proven for
successful application in extreme environments. REG‑L1’s
LED array eliminates the need for routine bulb changes. An
improved electronic design allows for energy efficient
operation at 12 to 24 VAC/VDC
•
•
•
•
•
•
•
Traffic monitoring
Border control
Access control
Car parking
Policing
Post event investigation
12 V to 24 VAC/VDC operation
Installation/Configuration Notes
Ordering chart
REG-L1
8
12
1.
Model
REG-L1
2.
Wavelength
8
850 nm
3.
Lens
12
12 mm
16
16 mm
25
25 mm
Functions
35
35 mm
Applications
• ANPR
75
75 mm
REG‑L1 is designed to work with NVRs or with DVRs. It is
specifically designed to work with third party ANPR
software.
X
C
01
www.boschsecurity.com
2 | REG‑L1 License Plate Cameras
Ordering Information
1.
Model
REG-L1
4.
Camera Type
X
Standard
5.
Region
C
CCIR
E
EIA
6.
Color
01
Black
Technical Specifications
Operational Range
Up to 30 m (100 ft) or 25 m (80 ft) depending on number plate size
Camera Sensors
1/2 in LXR CCD sensor
Resolution
High resolution 600 TVL
IR Illumination
LED array, 850 nm
Life
Greater than 5 years
Input
12 to 24 VAC/VDC
Consumption
30 W
Temperature Range
-50 °C to +50 °C (-58 °F to +122 °F)
Construction
Robust, weather sealed aluminum casting
and extrusion
Environmental
Sunshield
Dimensions
250 x 154 x 165 mm (9.8 x 6.1 x 6.5 in)
Weight
2.8 kg (6.2 lb)
Color
Supplied in black(RAL B401)
Camera Selection Tables
Range for 12 x 6 in (305 x 152 mm) number plates
(common in North America)
Model
Range
Optimal Distance
REG‑L1‑816
4 to 7 m (12 to 22 ft)
5 m (16 ft)
REG‑L1‑825
6 to 10 m (20 to 34 ft)
8 m (25 ft)
REG‑L1‑835
8 to 15 m (27 to 48 ft)
11 m (35 ft)
REG‑L1‑850
12 to 21 m (40 to 68 ft)
15 m (50 ft)
REG‑L1‑875
17 to 24 m (55 to 80 ft)
23 m (75 ft)
Range for 520 x 111 mm (20.5 x 4.4 in) number plates
(common in Europe)
Model
Range
Optimal Distance
REG‑L1‑812
3 to 6 m (10 to 20 ft)
5 m (16 ft)
REG‑L1‑816
5 to 8 m (16 to 26 ft)
7 m (23 ft)
REG‑L1‑825
7 to 12 m (23 to 40 ft)
10 m (33 ft)
REG‑L1‑835
11 to 18 m (34 to 60 ft)
15 m (50 ft)
REG‑L1‑850
17 to 25 m (56 to 82 ft)
22 m (72 ft)
REG‑L1‑875
22 to 30 m (72 to 100 ft)
28 m (92 ft)
REG-L1-812XC-01 License Plate Camera
License Plate Reader with LED, 12 mm lens,
SX8 camera, CCIR, 3 to 6 m (10 to 20 ft), psu
separate
REG-L1-812XC-01
REG‑L1‑816XE‑01 License Plate Camera
License plate reader with LED, 16 mm lens,
SX8 camera, EIA, 12 to 22 ft, psu separate
REG-L1-816XE-01
REG‑L1‑816XC‑01 License Plate Camera
License plate reader with LED, 16 mm lens,
SX8 camera, CCIR, 5 to 8 m (16 to 26 ft), psu
separate
REG-L1-816XC-01
REG-L1-825XE-01 License Plate Camera
License plate reader with LED, 25 mm lens,
SX8 camera, EIA, 20 to 34 ft, psu separate
REG-L1-825XE-01
REG‑L1‑825XC‑01 License Plate Camera
License plate reader with LED, 25 mm lens,
SX8 camera, CCIR, 7 to 12 m (23 to 40 ft), psu
separate
REG-L1-825XC-01
REG‑L1‑835XE‑01 License Plate Camera
License plate reader with LED, 35 mm lens,
SX8 camera, EIA, 27 to 48 ft, psu separate
REG-L1-835XE-01
REG‑L1‑835XC‑01 License Plate Camera
License plate reader with LED, 35 mm lens,
SX8 camera, CCIR, 11 to 18 m (36 to 59 ft),
psu separate
REG-L1-835XC-01
REG‑L1‑850XE‑01 License Plate Camera
License plate reader with LED, 50 mm lens,
SX8 camera, EIA, 40 to 68 ft, psu separate
REG-L1-850XE-01
REG‑L1‑850XC‑01 License Plate Camera
License plate reader with LED, 50 mm lens,
SX8 camera, CCIR, 17 to 25 m (55 to 82 ft),
psu separate
REG-L1-850XC-01
REG‑L1‑875XE‑01 License Plate Camera
License plate reader with LED, 75 mm lens,
SX8 camera, EIA, 55 to 80 ft, psu separate
REG‑L1‑875XE‑01
REG‑L1‑875XC‑01 License Plate Camera
License plate reader with LED, 75 mm lens,
SX8 camera, CCIR, 21 to 30 m (70 to 100 ft),
psu separate
REG‑L1‑875XC‑01
Accessories
EXMB.017B Wall Mount Adapter Bracket
Wall Mount Adapter, Black
EXMB.017B
EXMB.028B Cable Managed Wall Bracket
Cable-managed arm bracket, black
EXMB.028B
EXMB.015B Pole Mount Adapter Bracket
Pole Mount Adapter, black
EXMB.015B
EXMB.061 Pole Top Bracket
Stainless Pole Top Bracket
EXMB.061
EXMB.029B Ceiling Mount Bracket
Ceiling Mount Bracket, Black
EXMB.029B
UPA-2450-60 Power Supply
120 VAC, 60 Hz, 24 VAC, 50 VA Out
UPA-2450-60
UPA-2450-50 Power Supply
220 VAC, 50 Hz, 24 VAC, 50 VA Out
UPA-2450-50
REG‑L1 License Plate Cameras | 3
www.boschsecurity.com
4 | REG‑L1 License Plate Cameras
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
[email protected]
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
[email protected]
www.boschsecurity.com
© Bosch Security Systems Inc. 10 | Data subject to change without notice
T4824547979 | Cur: en-US, V19, 7 Jul 2010
Asia-Pacific:
Represented by
Robert Bosch (SEA) Pte Ltd, Security Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6258 5511
Fax: +65 6571 2698
[email protected]
www.boschsecurity.com
Intransa VideoAppliance™
VA100st Storage Appliance
• Simple, affordable & powerful rack mountable
• Reduces heating, cooling, electrical consumption &
Storage Appliances from security award-winning rack space with a greener, simple appliance solution
platform family
• Integrates with Intransa VA10/VA20/VA30
Server Appliances for complete Maximum Flex• Patented Intransa Video Data Management &
ibility Solutions
Retention™ (VDMR) Technology outperforms
commodity storage for physical security needs
• Use for CCTV DVR upgrades or with commodity
servers
•
Simple Solutions For Advanced, Reliable
Surveillance
Available Intransa Video Data Management &
Retention™ (VDMR) Technology
The Intransa VideoAppliance™ VA100st Storage Appliance is
designed specifically for the demands of physical security and
industrial video users. Customers today leverage VA100st
integrated with other Intransa VideoAppliance™ platforms for
complete digital IP solutions, others with major-brand DVRs as
an analog CCTV upgrade, or with commodity application servers.
All deliver cost savings and increased reliability and capacity
over commodity and analog solutions for demanding security
and surveillance needs.
The VA100st leverages Intransa’s patented Video Data
Management & Retention™ (VDMR) technology for the most
advanced physical security solutions available today.
Security departments now have an affordable, reliable and simple rack mount storage appliance choice for video surveillance
operations. Intransa VideoAppliance™ systems are designed
exclusively for non-stop, 7x24x365 video workloads, unlike
commodity storage intended for use with email, word processing
and other IT applications.
Award Winning Solutions
Not only is the Intransa VideoAppliance™ family customerproven around the world, but it’s also been awarded some of the
physi­cal security industry’s most prestigious accolades. These
honors include being named the Security Industry Association’s
2010 Best in Video Storage and Distribution, and in 2009 being
recognized as New Product of the Year at ASIS International, &
being among the Top 30 Technology Innovations of the year.
Learn more at www.intransa.com/company.
VDMR includes the Video Storage Administrator (VSA)
management interface, which simplifies setup and ongoing
operation, and Video Surveillance Optimization (VSOP) which
delivers improved video recording and playback performance
over commodity storage solutions.
Select From Variety of Features & Performance
A single 1U rack mountable VA100st comes equipped with
either 2, 4 or 8TB of raw recording capacity.
Increase recording capacity by adding a 2U rack mountable VA
Expander module. The VA Expander provides an additional 6 to
24TB of raw recording space, for a system total of up to 32TB.
Simply plug in the VA Expander and start recording.
Intransa VideoAppliance™ platforms can be used to provide
reliable, high performance recording capacity for new, all-IP
solutions, for existing CCTV analog environments as a DVR
upgrade, with commodity hardware, and a variety of vendorspecific security and network hardware.
Intransa VideoAppliance™ VA100st Storage Appliance
VA100st Storage Appliances support additional capacity with the
addition of a VA Expander module.
Green Your Surveillance While Cutting
Costs, Equipment Needs and Administrative
Challenges
Intransa VideoAppliance™ VA100st Storage Appliances eliminate the complexity and need for commodity storage systems.
Security practitioners save rack space, electricity, heating and
cooling, while further reducing equipment costs and support
requirements.
Learn more about VA100st Storage Appliances at
www.intransa.com/technology/flexibility.php.
Capacity, Video Protection
Intransa Video Data Management &
Retention™ (VDMR) Benefits
• VA100st raw capacity is 2TB (1.5TB available with RAID
5), 4TB (3TB with RAID 5) or 8TB (6TB with RAID 5) of
low energy/high capacity SATA-II video storage
By leveraging built-in Intransa Video Data Management &
Retention™ (VDMR) technology, VA100st delivers unmatched
dependability with expandable video storage capacity.
• Add a VA Expander for up to 32TB total raw system capacity, with choice of 6TB (5.5TB available with RAID 5,
5TB with RAID 6), 12TB (11TB with RAID 5, 10TB with
RAID 6) or 24TB (22TB with RAID 5, 20TB with RAID 6)
Integrated Video Storage Optimization (VSOP) improves
recording & playback performance, reducing the amount of
servers and storage required for many video surveillance
application environments. And the VSA Console simplifies
both setup and daily operation, ensuring that neither extensive IT storage knowledge nor system shutdown for routine
maintenance is ever required for reliable, 24x7x365 recording
and playback operations.
• Advanced RAID 5 & 6 protection eliminates the risk of
lost video & hot-swap disks ensure non-stop recording
Video Data Management & Retention™ Technology
• Patented VDMR technology includes VSA Console, VSA
Storage Manager, VSA Agent, & VSA Video Storage
Optimization (VSOP) functionality included
Connectivity
• VA100st supports seamless integration with Intransa
VideoAppliance™, including the VA10, VA20 and VA30
Server Appliances, VA80tr Server/Storage Appliances, &
SR840, SR850 & SR860 Servers
• DVRs, NVRs and commodity servers can also be connected
The Intransa VideoAppliance™ Technology Partner Labs test
and certify standard IP, megapixel and H.264 cameras plus
VMS systems, NVRs, DVRs, access control and other applications for use with Intransa VideoAppliance™ for physical
security’s real-world, demanding requirements.
In fact, hundreds of products and applications have already
been certified for risk-free integration with Intransa VDMR
technology-based solutions. Intransa VideoAppliance™ is the
customer-proven solution for reliable, affordable and simple
video surveillance.
Dimensions
• VA100st is a compact 1U rack unit footprint, 1.7”/43mm
height by 17.2”/437mm width by 19.8”/503mm depth
• VA Expander is a compact 2U rack unit footprint, 3.9”/
89mm height by 17.2”/437mm width by 25.5”/648mm
depth
Detailed Technical Information
For detailed technical information, find more at
www.intransa.com/archequip-spec.php.
Corporate Headquarters
10710 N. Tantau Avenue, Cupertino, CA 95014 USA
Toll Free 866.446.8726 • Phone 408.678.8600
www.intransa.com • [email protected] • www.videoappliance.com
© 2010 Intransa, Inc. All rights reserved.
XPP 6.5 FACTSHEET
Milestone XProtect™ Professional
Top performance IP video surveillance with
an advanced feature set.
XProtect Professional is the right product for small to mid-sized installations that need robust
single-server surveillance software with the full functionality of advanced management, flexible
scheduling, fast searching and analysis. XProtect Professional supports up to 64 cameras
simultaneously with the widest choice of network video and computer hardware equipment.
KEY BENEFITS:
◆◆
Freedom to choose: Compatible with more than 500 different IP-based video camera
and encoder products (MJPEG, MPEG4, H.264, MPEG4 ASP, MxPEG) from more than 50
different vendors.
◆◆
Dependable, robust and stable: Proven in daily operation in more than 45,000
customer installations worldwide.
◆◆
Use existing IP networks effectively: Use effective video compression (MJPEG,
MPEG4, MPEG4 ASP, H.264 and MxPEG) and bandwidth-optimized multi-streaming to
leverage existing IP networks effectively.
◆◆
Cost-optimized archiving: Move your video data to more cost-effective storage media
either locally or on the network.
◆◆
High performance: Achieved on standard computer equipment by utilizing powerful
multi-threaded technology.
◆◆
Flexible remote access: Access your video surveillance data from any location at any
time using a desktop computer, laptop or PDA.
◆◆
Tailored for IT environments: Integrates with windows authentication and authorization. Runs as a Windows® service.
◆◆
Export evidence material fast: Deliver authentic video proof to public authorities or
for internal investigations.
◆◆
Future-safe: The IP approach is the foundation of tomorrow – available today. Ongoing
product enhancements give you long-term returns on your surveillance investment.
The Open Platform IP Video Software
Key Product Features
Advanced video management tools
SYSTEM, ADMINISTRATION & INTEGRATION
Single-server video surveillance solution: Unlimited recording of MJPEG, MPEG4, H.264, MPEG4 ASP, MxPEG video
from IP cameras and IP video encoders with analog cameras.
◆◆
Virtual Matrix: Control live camera views on remote computers for distributed viewing.
◆◆
Input/Output Event Control: Via cameras or networked I/O
devices for event control, manual event buttons and event list
in recordings.
◆◆
Multi-channel, two-way audio: Listen-in/recording with
instant playback and transmit client microphone input to
remote speakers.
◆◆
◆◆
◆◆
◆◆
Automatic camera model detection: Supports more than
500 IP cameras and IP video encoder models from over 50
different vendors.
Single-server: Supporting up to 64 cameras and continuously
recording from up to 64 cameras activated by motion or event
with speed-up functionality.
Network- and storage-optimized: Bandwidth-optimized
multi-streaming with new compression methods; MPEG4 ASP,
MxPEG and H.264, besides MJEPG and MPEG4. Move recorded video data to more cost-effective storage media locally or
on the network.
◆◆
Scheduled archiving: Move video data hourly to a local or a
networked drive.
◆◆
User-initiated start and stop of recording: Based on
access privileges set by the administrator, client users can
manually start recording for a pre-defined span of time.
◆◆
Built-in Video Motion Detection: Independent of camera
model and supporting up to 64 cameras simultaneously per
server.
REMOTE OPERATIONS
Live view and playback: From PDA and access clients sup◆◆
porting up to 64 cameras simultaneously.
◆◆
Advanced views layout: Work with private and shared server-stored camera views containing up to 8x8 layouts, Hotspot,
Matrix and Carousel elements, static and active HTML maps, all
distributed across multiple computer monitors and windows.
◆◆
Intelligent PTZ: Manual control, presets, go to preset on
event, patrolling with multiple schemes and pausing option,
joystick control and scanning.
“With 7 different locations in the UK, this micro-brewery,
bar and restaurant chain requires that the managers can
have remote access to their video surveillance for keeping
on top of activities when they are in another city. Managers can view live or recorded images, anytime from
anywhere. With the networks already in place, new cameras can be added or moved around, if needed. Local police
like the system, too, for its ability to deliver evidence.”
Nick Desai, co-owner of ZERODEGREES
www.milestonesys.com
SEARCH, EXPORT & SECURE DATA
Post-recording processing: Smart Search, Digital PTZ with
◆◆
optional image smoothing, or IPIX post-recording PTZ.
◆◆
Evidence export: JPEG, AVI, WAV and native database formats with stand-alone recording viewer, data encryption and
logs, user notes and report printing.
◆◆
Authentication: Local Microsoft Windows User Account and
Groups, and XProtect user names and passwords.
◆◆
Authorization: Local Microsoft Windows User Accounts and
Groups, and XProtect user profiles, all controlling access privileges and allowed actions at camera level.
◆◆
Logging: Stores user actions by time, locations and cameras,
and full system operation.
◆◆
Alerting: Notify users on event or motion detection by sound,
e-mail and SMS.
Detailed Product Features
XProtect Professional server modules
RECORDING SERVER
Simultaneous digital multi-channel video and audio recording
and relaying.
◆◆
◆◆
Two-way audio transmitting client microphone input to remote
speakers attached to IP devices.
◆◆
Bandwidth-optimized multi-streaming by splitting the single
video stream from camera to differentiated streams for live
view and recording. Client can request live view at a different
frame rate and at lower resolution than the recording settings.
◆◆
Connectivity to cameras and video encoders supports MJPEG,
MPEG4, MPEG4 ASP, H.264 and MxPEG.
◆◆
Auto-detect camera models during setup.
◆◆
Up to 64 installed cameras; simultaneous recording and live
view of up to 64 cameras.
◆◆
Recording technology: secure high speed database holding
JPEG images or MPEG4 and MxPEG streams including audio.
◆◆
Recording speed: 30+ frames per second per camera, limited
only by hardware.
◆◆
Recording quality depends entirely on camera and video server
capabilities: no software limitation.
◆◆
Start cameras on live view requests from clients.
◆◆
Unlimited recording capacity with daily archiving possible.
◆◆
Hourly to daily database archiving with optional automatic
move to network drive saves storage capacity on the local
server – with images still available transparently for playback.
◆◆
Built-in, real-time, camera-independent motion detection
(VMD); fully adjustable sensitivity, zone exclusions, recording activation with frame rate speed up, and alert activation
through e-mail or SMS.
◆◆
Client-initiated start of recording based on pre-defined recording time and access privileges.
◆◆
Pan-Tilt-Zoom preset positions, up to 50 per camera.
◆◆
PTZ go-to preset position on events.
◆◆
Combine PTZ patrolling and go-to positions on events.
◆◆
Set multiple patrolling schedules per camera per day: i.e. different for day/night/weekend.
◆◆
PTZ scanning on supported devices: viewing or recording while
moving slowly from one position to another.
◆◆
VMD-sensitive PTZ patrolling among selected presets.
◆◆
Send Wash and Wipe commands to supported PTZ models.
◆◆
On pre-defined events Matrix remote commands are automatically sent to display live video remotely on computers running
the Matrix Monitor or the Smart Client with Matrix Plug-in.
◆◆
Recording Server runs as a Windows Service.
The Open Platform IP Video Software
Detailed Product Features
XProtect Professional server modules
RECORDING VIEWER
Play back recorded video and audio locally on the Recording
Server.
◆◆
◆◆
View up to 16 cameras time-synchronized during playback.
◆◆
Scrollable activity timeline with magnifying feature.
◆◆
Instant search on recordings based on date/time and activity/
alarm (Video Motion Detection).
◆◆
‘Smart Search’ for searching for sequences with motion.
◆◆
Evidence can be generated as a printed report with time and
date stamp, as a JPEG image, or in AVI film.
◆◆
Export audio recordings in WAV or AVI format.
◆◆
Export video, digitally zoomed to view area of interest only and
to minimize export footprint size.
◆◆
Export ‘Evidence CD’ containing native database and Recording
Viewer for instant, easy viewing by authorities.
◆◆
Encryption and password protection option for exported recordings and files.
◆◆
Ability to add comments to exported evidence, also encrypted.
◆◆
Option to send e-mail.
◆◆
De-interlacing of video from analog cameras.
◆◆
IPIX technology for PTZ in 360° recorded images.
IMAGE SERVER
Remote access for Smart and Remote Clients.
◆◆
◆◆
Built-in web server for download and launch of clients and
plug-ins.
◆◆
Authenticate access based on local Microsoft Windows account
database, or XProtect user name and password.
◆◆
Authorize access privileges per local Microsoft Windows user
accounts and groups, XProtect user profile or grant full access.
◆◆
User profiles control access to: Live view, PTZ, PTZ presets, output control, events and audio; Playback, AVI export, JPG export,
DB export, Sequences, Smart Search and Audio.
◆◆
Setup, Edit private views, Edit public views.
◆◆
Audit logs of exported evidence by user and file.
◆◆
Audit logs of client user activity by time, locations and cameras.
www.milestonesys.com
PDA SERVER
Remote access for PDA Client.
◆◆
◆◆
Handle login and session requests between PDA clients and
Image Server.
◆◆
Resize video surveillance images to fit the screen layout of PDA
Client.
Detailed Product Features
XProtect Professional client modules
REMOTE CLIENT
View live video or playback 1-16 cameras´ recordings from the
server simultaneously.
◆◆
◆◆
Advanced video navigation including fast/slow playback, jump
to date/time, single step and video motion search.
◆◆
Shared views can be managed centrally via the server with
admin/user rights and user groups.
◆◆
Import static or active HTML maps for fast navigation to cameras and good premise overviews.
◆◆
Activate Matrix via graphical premise maps using JavaScript or
integrate with centralized access control systems.
◆◆
Control output port relay operation, like control of gates.
◆◆
Quick overview of sequences with detected motion and preview window.
◆◆
Quick overview of events/alerts.
◆◆
Control PTZ cameras remotely, also using preset positions.
◆◆
Remote PTZ Point-and-Click control.
◆◆
Remote PTZ zoom to a marked rectangle.
◆◆
Take manual control over a PTZ camera that runs a patrolling
scheme; after a timeout with no activity the camera reverts to
its scheduled patrolling.
◆◆
IPIX 1x2 or 2x2 ‘Quad View’ for viewing all 360° at once.
◆◆
Optional video compression in streaming from server to client
gives better use of bandwidth.
◆◆
Create AVI files or save JPEG images.
◆◆
Print incident reports with free-text user comments.
◆◆
System logon using XProtect user name and password.
XProtect Smart Client:
The intuitive Smart Client
provides excellent overview
for the operator with easy
accessible functions.
Enlarged view of
user friendly interface
With XProtect Remote Client you can import static or
active HTML maps for good premise overviews and
quick navigation to cameras in multiple locations.
The Open Platform IP Video Software
Detailed Product Features
XProtect Professional client modules
SMART CLIENT
Smart Client includes all the features of XProtect Remote Client
plus more:
◆◆
◆◆
Audible alerts activated by motion detection or event occurrence per camera.
◆◆
Smart Search lets you quickly search selected areas of camera
images for motion. Within a camera image you can mark a
specific area, multiple areas or overlapping areas for detecting
motion sequences.
◆◆
Graphical timeline displays scrollable view of recorded sequences by adjustable time spans for an excellent graphical
overview of when images have been recorded.
◆◆
Installed per default on Recording Server for local viewing and
playback of video and audio.
◆◆
Start recording on cameras for a pre-defined span of time (default 5 minutes). Subject to privileges set by administrator.
◆◆
Live-view digital zoom allows zoomed-out recordings while the
operator digitally can zoom in to see details.
◆◆
’Update On Motion Only’ optimizes CPU usage by letting motion detection control whether the image should be decoded
and displayed or not. The visual effect is a still image in the
view until motion is detected.
◆◆
Digital zoom function is enabled per default for fixed cameras
in live view and for fixed and PTZ cameras in playback mode.
◆◆
Features for printing images.
◆◆
Shared and private camera views offer 1x1 up to 8x8 layouts in
addition to asymmetric views.
◆◆
Export ‘Evidence CD’ containing native database and Recording
Viewer for instant, easy viewing by authorities.
◆◆
Multiple computer monitor support with a main window and
any number of either windowed or full screen views.
◆◆
AVI export automatically includes assigned audio source.
Hotspot function for working in details with a camera selected
from a view containing multiple cameras.
◆◆
◆◆
Encryption and password protection option for exported recordings and files.
Carousel function allows a specified view to rotate between
pre-defined cameras with individual timing and order with
multiple appearances. Carousel function can be controlled allowing the operator to pause carousel function and to switch to
previous or next camera.
◆◆
◆◆
Assign outputs, PTZ presets, events and views as actions to
joystick buttons and as keyboard shortcuts.
◆◆
Current camera state is displayed as text in title bar of live view
window as green (live), red (recording) or yellow (stopped).
◆◆
Video quality is optimized when maximizing live and playback
windows.
◆◆
Context-sensitive help function.
◆◆
System logon using NTLM challenge handshake with local
Microsoft Windows user account database.
◆◆
Matrix function to view live video from multiple cameras
through the Image Server in any view layout with customizable
rotation path, remotely controlled by computers sending Matrix
remote commands.
◆◆
Send Matrix remote commands to display live video remotely
on computers running the Matrix Monitor or the Smart Client
with Matrix Plug-in.
◆◆
Cameras’ built-in audio sources available in live and in playback.
◆◆
Transmit client microphone input to one or all remote speakers
attached to IP devices.
◆◆
Goto PTZ preset positions directly from camera menu.
◆◆
Send wash and wipe commands to supported PTZ by
programming keyboard shortcuts or joystick buttons.
◆◆
Go to a specific camera directly from camera menu.
◆◆
Copy camera images to clipboard.
◆◆
Manually trigger events by activating an administrator defined
event from a list.
www.milestonesys.com
Detailed Product Features
XProtect Professional client modules
MATRIX MONITOR
Virtual Matrix showing live video directly from up to 4 cameras
at a time triggered remotely by Matrix remote commands.
◆◆
◆◆
Camera view shifts by first-in-first-out (FIFO).
◆◆
Multiple events can control a single Matrix monitor and single
events can control multiple monitors.
◆◆
Manually confirm or auto-accept Matrix remote commands.
◆◆
Show live video at the maximum speed (frame rate) allowed
by your cameras.
INTEGRATION OPTIONS
Compatible with XProtect Transact that integrates video surveil◆◆
lance with ATM or POS cash register systems for managing loss
prevention and fraud.
◆◆
Integrate with access control systems, alarms, gates, building
management systems, etc. using hardware I/O, internal events
and TCP/IP events.
◆◆
Create, import and use HTML pages for navigation between
views or to trigger a virtual matrix in XProtect Smart and Remote Clients.
PDA CLIENT
View live or playback video from a single server or from multiple servers in half-screen or full-screen formats.
◆◆
◆◆
In live view you can control Pan-Tilt-Zoom cameras manually or
use preset positions, and control the cameras’ output relays to
trigger external actions like opening doors or gates, turning on
lights, etc.
◆◆
To find recordings you can jump to specific time/date or to
next detected motion, or use motion detection sequence
overviews.
◆◆
When viewing recordings, you can play back at variable speed
or single-step-image-by-image.
◆◆
The PDA client connects to the XProtect Professional server
using any IP connection; typically wireless LAN, GPRS, etc.
◆◆
Video compression from the server to PDA optimizes bandwidth usage.
◆◆
System logon using XProtect user name and password.
Using a PDA Client you can select a camera. View a live
video with PTZ, or play back recordings in single step or
instant motion search.
The Open Platform IP Video Software
XPP 6.5 FACTSHEET
Milestone Systems
The Open Platform IP Video Software
MINIMUM SYSTEM REQUIREMENTS:
Common requirements:
CPU: Intel® Pentium® 4 or higher (Intel® Core™2 Duo
recommended for Professional Server 6.5 and Smart Client 3.6),
min. 2.4 GHz
OS: Microsoft Windows XP Professional (32 bit or 64 bit**) and
Windows Server 2003 (32 bit or 64 bit**), Windows Server 2008
(32 bit or 64 bit**), Windows Vista Business (32 bit or 64 bit**),
Windows Vista Enterprise (32 bit or 64 bit**) and Windows Vista
Ultimate (32 bit or 64 bit**)
Graphics Card: AGP or PCI-Express, minimum 1024 x 768 (1280
x 1024 recommended), 16 bit colors
Network: Ethernet (100 Mbit or higher for Smart Client 3.6, Remote
Client 3.5, and Matrix Monitor 2.3; 1 Gbit for Server 6.5 recommended)
** Running as a 32 bit application
XProtect Professional Server 6.5:
RAM: Minimum 1GB (2 GB or more recommended)
Hard disk type: E-IDE, PATA, SATA, SCSI, SAS (7200 RPM or
faster)
Hard disk space: Minimum 80 Gbyte free (depends on number
of cameras and recording settings)
Software: DirectX 9.0 or newer required to run Playback Viewer
application, and Microsoft .NET 1.1 Framework required to run
Recording Server Manager plus PDA Server, and Internet
Information Server (IIS) 5.1 or newer to run PDA Server
XProtect Smart Client 3.6:
RAM: Minimum 512 Mbyte (1 GB recommended for larger views,
1 GB recommended on Vista)
Hard disk space: Minimum 100 Mbyte free
Software: Microsoft .NET 2.0 Framework and DirectX 9.0 or newer
XProtect Remote Client 3.5:
RAM: Minimum 256 Mbyte (512 MB recommended for larger
views, 1 GB recommended on Vista)
Hard disk space: Minimum 10 Mbyte free
Software: DirectX 9.0 or newer
XProtect Matrix Monitor 2.3:
RAM: Minimum 512 Mbyte (1 GB recommended on Windows
Vista)
Hard disk space: Minimum 50 Mbyte free
Software: DirectX 9.0 or newer
SUPPORTED LANGUAGES:
Professional Server 6.5: English, German, French, Spanish, Italian,
Danish, and Japanese. Help system and Recording Server Manager
in English only.
Smart Client 3.6: Arabic, Chinese (Simplified and Traditional),
Czech, Danish, Dutch, English, French, German, Italian, Japanese,
Korean, Polish, Russian, Spanish, Swedish and Turkish.
Remote Client 3.5: Simplified Chinese, Danish, English, French,
German, Italian, Japanese, Spanish, and Swedish.
Matrix Monitor 2.3 and PDA Client 1.0: English.
LICENSE INFORMATION:
Server License:
Mandatory for installing the product and covers installation on a
dedicated computer using the Software License Code. The Server
license includes the Professional Server modules: Recording Server,
Recording Viewer, Recording Server Manager, Image Server, PDA
Server, Smart Client, Remote Client, PDA Client, and Matrix Monitor.
Camera License:
A camera license is required for each connected camera, either
directly or per video channel through a video encoder. Camera
Licenses can be purchased in packages of 4, 6, 9, 16, 25, 36, 50 or
64 cameras.
Client License:
All client modules are not licensed and can be installed and used
on any number of computers.
COMPANY PROFILE:
Founded in 1998, Milestone Systems is the global industry leader in
true open platform IP video management software. The XProtect™
platform delivers powerful surveillance that is easy to manage, reliable and proven in thousands of customer installations around the
world. With support for the widest choice in network hardware and
integration with other systems, XProtect provides best-of-breed solutions to ‘video enable’ organizations – reducing costs, optimizing
processes, protecting people and assets. Milestone software is sold
through authorized and certified partners. For more information, visit:
www.milestonesys.com.
Company and product names mentioned are registered trademarks of their respective owners.
Milestone Systems reserves the right to change the specification without prior notice.
XProtect PDA Client 1.0:
CPU: Intel StrongARM® or 100% compatible
RAM: Minimum 32 Mbyte
Network: Ethernet (256 Kbit or higher recommended)
Graphics Card: minimum 320 x 200, 16 bit colors
OS: Microsoft Windows Pocket PC 2003/2003 SE/Mobile 5.0
www.milestonesys.com
© 2009 Milestone Systems A/S.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement