Cal Flame P-101 Installation manual

Cal Flame P-101 Installation manual
When Safety Matters
Contents
Why Consilium?
4
Salwico Fire Detection System
Salwico Cargo Fire Detection Centrals
Control/Repeater panels
Salwico Cruise Fire Detection Centrals
Salwico Workboat Fire Detection Centrals
Accessories
Central Unit Accessories
Log Printer
Loop installation unit
Interfaces
Addressing Tool
Adressable Detectors
Accessories
Short circuit isolator
Addressable manual call points
Adressable I/O Units
Conventional Detectors
Manual Call Points
Equipment For Hazardeous Areas, Zone 0-1
Equipment For Hazardeous Areas, Zone 2
Base Plates
Test equipment
Test equipmane accessories
General Alarm Devices
Bells
Sounders
Lights
Combined Sounders and Lights
Door Control Accessories
Ventilation duct adapter
6
7
8
8
12
13
14
14
14
15
15
15
18
18
19
19
21
24
24
26
27
29
31
32
32
33
35
36
36
37
Salwico Gas Detection System
Standard Centrals
Individual modules for custom made centrals
Control/Repeater Panels
Log Printer
Power Boost Loop units & Gas Detectors
Gas Detectors
Gas Detectors suitable for harsh environment
Open path gas detectors
Duct Mounting kits
Accessories for Gas Detectors
Alarm Devices
Portable Gas Detectors
Calibration Parts
Calibration Gas Bottles
Salwico Gas Sampling System SW2020
39
40
40
43
43
43
44
45
47
47
48
48
51
52
53
54
Contents
Salwico Monitoring System
Salwico Emission Monitoring System
Salwico G1000 Smoke Density Monitoring System
Salwico G2000 Ambient Oil Mist Detection System
55
56
62
64
Marine approval
Full details from tests and approvals by required classification societies are available on request.
Why Consilium?
Consilium develops and markets products, services and systems
for safety, navigation and automation applications. The guiding
principle behind Consilium’s products and systems is to help
protect people, the environment and material values.
With a stable base of proprietary products, complemented by
high-quality external brands, and a global market organisation,
Consilium ranks among the world’s leading suppliers to the
international shipping, transport and oil and gas industries.
Why Consilium?
Consilium AB is one of the world-leading suppliers of
products and systems for safety, navigation, environmental
monitoring and automation solutions. We are established in
all the world’s important countries within shipbuilding, shipping and in the oil and gas industry. With our global sales
and service organization we are able to be your sales and
service support where ever you are.
Marine & Safety
The business area Marine & Safety focus on the international shipping industry and offers products and systems
for safety and navigation. The range of products includes
fire and gas detection systems, integrated navigation systems, marine voyage data recorders, speed logs and radar
systems. Consilium also offer systems for measuring the
emissions of greenhouse gas from ships.
Our mission is to protect human lives, assets and the environment and to make a difference when safety matters.
We hold a strong position by offering service and support
all over the world which is an important criteria for shipping companies as well as shipyards when making investment decision.
Business development
Based on our market and technical knowledge, we invest
in new areas and currently have a number of interesting
business development projects in our portfolio. Many business projects have developed beyond expectations, which
have resulted in new separate business areas and separate
divisions or new products and solutions. This is the case
with products and systems for military vessels, special radar
system for detection of oil spills, port surveillance, ECDIS
and integrated navigational systems.
4
Marine & Safety business area also offers safety solutions
for land transportation and building safety and we have
established ourselves as a leading supplier of fire detection
solutions for trains.
Fire safety & Automation
In the Fire safety & Automation business area, Consilium
supplies automation products as well as fire and safety
systems for oil and gas plants. The product range includes
instrumentation, control systems, automated inventory
management for tank farms and terminals, solutions for fire
and gas detection, oil and gas pipeline leak detection, fire
extinguishing systems, emergency shutdown systems and
communication systems.
Why Consilium?
After-Sales Support
At Consilium we offer an extensive after sales support
program which includes everything from service and maintenance of all supplied systems to supply of spare parts
and retrofitting of older installations.
We offer commissioning and world-wide after-sales support of all our products through our wide network of
own offices and representatives. We offer our customers
spare parts that are backward compatible with the majority of our delivered systems. We provide full 24/7 support
and take care of the service of your systems by our highly
skilled engineers.
Key facts/benefits:
• Modification and maintenance
• Telephone and e-mail support
• On site trouble shooting
• Calibration
• Annual Performance Test (APT) of systems
• World-wide network of own service stations
• Training of onshore and offshore staff
Management System
We have established, documented, implemented and maintained a quality management system to continually improve
the effectiveness. This provides a structured process for
the achievement of product quality and customer satisfaction in accordance with the requirements of international
standards.
5
Salwico Fire Detection System
Salwico
Fire
Detection
System
6
Salwico Fire Detection System
Salwico Cargo Fire Detection Centrals
Salwico Cargo, with integrated control panel
Salwico Cargo is a fully SOLAS compliant fire detection central. It is supplied both as
analogue addressable or conventional version. Tested and certified by all the major classification societies, this system provides optimal fire detection for merchant vessels. Salwico Cargo cabinet is in some versions featured with general alarm system. The control
panel is embedded into the main cabinet and it provides possibility to attach remote
control and repeater panels to the main cabinet.
Addressable
F400-101-X010YA
F800-101-X010YA
Salwico Cargo,, with integrated control panel
2 -6 loops and 8-16 relays alt.
8 - 32 Conventional Sections and 8-16 Relays
Conventional
F400-101-XY100A
F800-101-XY100A
400 = Wall mounted
800 = Recess mounted
Addressable:
X = No of relay modules 1 or 2, Y = No of loop modules 2 - 6
Conventional:
X = No of relay modules 1 or 2, Y = No of I/O 70 module 1 - 4
Salwico Cargo, including cabinet and external control panel
Salwico Cargo is a fully SOLAS compliant fire detection central. It is supplied both as
analogue addressable or conventional version. Tested and certified by all the major classification societies, this system provides optimal fire detection for merchant vessels. Salwico Cargo cabinet is in some versions featured with general alarm system. The control
panel is installed separately on any location and possibility to attach remote control and
repeater panels to the main cabinet is provided.
Addressable
F000-101-X010YA
F010-101-X010YA
Salwico Cargo, including cabinet and external control panel
2 -6 loops and 8-16 relays alt.
8 - 32 Conventional Sections and 8-16 Relays
Conventional
F000-101-XY100A
Addressable
000 = 440x400x180 Cabinet / 010 = 440x570x180 Cabinet
X = No of relay modules 1 or 2, Y = No of loop modules 2 - 6
Conventional
X = No of relay modules 1 or 2, Y = No of I/O 70 module 1 - 4
7
Salwico Fire Detection System
Control/Repeater panels
Control/Repeater M 4,3 Cargo
5100195-20A
The Control/Repeater Panel M 4.3 is a control panel with a 4.3” graphical colour display
used to manage and supervise a system. It mounts on any flat surface independently
from a fire alarm cabinet and is equipped with communication buses for connecting
to the system. USB In front of the panel provides easy access to the system’s data and
diagnostic logs. It also provides the following features:
• A backlit 4.3” graphical colour display • Alarm buzzer • LED status indicators
• Backbone Bus Interface • Ethernet connection • RS-422/RS-485 serial interface
• RS-232/RS-485 serial interface • Three USB interfaces • Two configurable powered
I/Os • Two programmable relay outputs
Salwico Cruise Fire Detection Centrals
Salwico Cruise, with integrated control panel
Salwico Cruise is a fully SOLAS compliant fire detection central. Tested and certified by
all the major classification societies, this system provides optimal fire detection for large
vessels. Fire Detection Centrals are fully customised using all benefits of flexible system
design. Main features of such centrals are Modularity, Full Redundancy on multiple levels
including CPU, Power and Communication, Hot-Swap on module level. All to insure
maximum availability possible, allowing lowest lifetime cost.
Salwico Cruise systems are fully Safe Return To Port compliant.
Control M X H
5100002-02A
Control M X is used in three different ways:
• As a central controller (Master) in a Fire detection system.
• As a central backup controller (Slave) in a Fire detection system.
• As a provider of additional communication channels, additional external communication, or as an extension bus.
A Control M X provides the following features:
• Ethernet connection
• RS-422/RS-485 interface
• RS-232/RS-485 interface
• Two programmable relay outputs
For details on assembling a system and definitions of common system terms, refer to
the Installation Manual.
Loop M X H
Loop M X enables the connection of one addressable detector loop. For details on
assembling a system and definitions of common system terms, refer to the Installation
Manual.
5100026-01A
8
Salwico Fire Detection System
Buscon M 10 H
BusCon M 10 has two major functions:
• Terminal board for functions in Control Panel M4.3 and Control/Repeater M4.3
• Terminal board for Backbone Bus External BBE (RS485 Repeater)
These functions can be used together or individually. The module BusCon M 10 has
one connection for either RS232 or RS485 communication. For details on assembling a
system and definitions of common system terms, refer to the Installation Manual.
Note! BusCon M 10 does not provide a galvanically isolated bus communication BBE.
Operating voltage range 19-30 VDC
5100056-01A
Buscon M 20 H
The BusCon M 20 connects the Control Panel M 4.3 to the backbone bus and provides
connection terminals for functions from Control Panel M 4.3. The module BusCon M 20
has two relay outputs and one channel for RS422 or RS485 communication. For details
on assembling a system and definitions of common system terms, refer to the Installation Manual.
5100054-01A
Bus Isolator
Bus Isolator M divides the system backbone bus into segments. Its dual functionality isolates communications and basic backup signals between the stretched system parts and
provides power to the control panel (e.g. Control Panel M 4.3). For details on assembling a system and definitions of common system terms, refer to the Installation Manual.
5100071-01A
I/O M 70 H
I/O M 70 provides eight programmable I/O 70 channels, each individual channel can be
configured as either:
• Programmable Inputs
• Programmable Outputs max 70mA for buzzers, relays etc
• Conventional detector zones
This module monitors conventional detectors, digital inputs, two-wired inductive sensors and controls low-power units, such as buzzers and relays. For details on assembling
a system and definitions of common system terms, refer to the Installation Manual.
5100075-01A
9
Salwico Fire Detection System
I/O M 700 H
I/O M 700 provides eight programmable I/O 700 channels, used for either:
• Programmable Inputs
• Outputs max* 700 mA for magnets, power supply etc
Use the I/O M 700 as an input module, or use it to monitor, control, and/or supply
units such as alarm devices, magnets. It can also provide constant power supply to other
system modules such as Control and Repeter Panels etc. For details on assembling a
system and definitions of common system terms, refer to the Installation Manual.
* Used as an output module, I/O M 700 can provide max output 1400 mA, if two outputs are connected together.
5100077-01A
Relay M 8 H
Relay M 8 provides eight programmable relay contacts. Each of these relay contacts provide a potential free change-over contact. Use Relay M 8 to control units such as sirens,
magnets, flashlight, alarms and ventilation fans. For details on assembling a system and
definitions of common system terms, refer to the Installation Manual.
5100081-01A
Charger M H
Charger M provides power to the system through the Backbone Bus. It connects to
either a change-over module or directly to a power supply, supervises change-over
and connects the power supply units. By using dual Charger M modules, it is possible
to replace one Charger M module without powering down the system. For details on
assembling a system and definitions of common system terms, refer to the Installation
Manual.
5100062-01A
Change Over M X H
The Change Over M X can switch automatically between two power sources, mains
and emergency, with preference towards mains power if both sources are operational.
The Change Over M X is used to connect to the PSU module in a system, and is also
provided with one extra power supply outlet (which can be used for example to a
printer). This is a separate module without any contact with the backbone bus. For
details on assembling a system and definitions of common system terms, refer to the
Installation Manual.
5100066-01A
10
Salwico Fire Detection System
Change Over M EXT H
Change Over M Ext monitors mains and emergency power inputs and gives fault indication if either supply is lost. The power input status is indicated by the front panel LEDs.
Change Over M Ext provides two separate controllable 230 VAC outputs, OUT 3 and
4, protected by separate front mounted fuses. There are also two separate programmable change over relays, OUT 5 and 6. OUT 3-6 are used to control units such as sirens,
magnets, flashlights, alarms and ventilation fans. For details on assembling a system and
definitions of common system terms, refer to the Installation Manual.
5100068-01A
PSU M AC/DC 5A
PSU M AC/DC 5A powers the system. It is short-circuit proof and can be used in pairs
to supply 5+5 A. For details on assembling a system and definitions of common system
terms, refer to the Installation Manual.
5100087-01A
PSU M DC/DC 5A
The Dimension CD-Series offer DIN-rail DC/DC converters in the 92-120W output
power range in a very compact housing. These DC/DC converters are allowed to run
with a battery or similar sources or can also be used to refresh and stabilize the 24Vdc
on the end of long cable runs. The basic units include all the essential basic functions
while the -S1 version is equipped with quick connect spring clamp terminals, a DC-OKcontact which monitors the output and an input-low-relay-contact. The –L1 version additionally fulfils the NEC Class 2 requirements. All devices except the CD5.241-L1 have
a PowerBoost of 20% incorporated. This extra power can even be used continuously up
to +45°C.
5100088-01A
Control/Repeater M 4,3 Cruise
5101003-50A
The Control/Repeater Panel M 4.3 is a control panel with a 4.3” graphical colour display
used to manage and supervise a system. It mounts on any flat surface independently
from a fire alarm cabinet and is equipped with communication buses for connecting
to the system. USB In front of the panel provides easy access to the system’s data and
diagnostic logs. It also provides the following features:
• A backlit 4.3” graphical colour display • Alarm buzzer
• LED status indicators
• Backbone Bus Interface
• Ethernet connection
• RS-422/RS-485 serial interface
• RS-232/RS-485 serial interface
• Three USB interfaces
• Two configurable powered I/Os
• Two programmable relay outputs
11
Salwico Fire Detection System
Repeater M 4,3
5100096-20A
The Control/Repeater Panel M 4.3 is a control panel with a 4.3” graphical colour display
used to manage and supervise a system. It mounts on any flat surface independently
from a fire alarm cabinet and is equipped with communication buses for connecting
to the system. USB In front of the panel provides easy access to the system’s data and
diagnostic logs. It also provides the following features:
• A backlit 4.3” graphical colour display • Alarm buzzer
• LED status indicators
• Backbone Bus Interface
• Ethernet connection
• RS-422/RS-485 serial interface
• RS-232/RS-485 serial interface
• Three USB interfaces
• Two configurable powered I/Os
• Two programmable relay outputs
Salwico Workboat Fire Detection Centrals
Salwico Workboat AI
Salwico Workboat AI is an analogue addressable fire detection system with 2 fire detector loops SOLAS compliant. Tested and certified by all major classification societies, this
system provides an optimal fire detection solution for smaller vessels.
5102002-01A
The system is managed and supervised through Control Panel M 4.3. The Control Panel
M 4.3 is mounted on the front of the fire alarm cabinet.
Salwico Workboat AE
Salwico Workboat AE is an analogue addressable fire detection system with 2 fire detector loops SOLAS compliant. Tested and certified by all major classification societies,
this system provides an optimal fire detection solution for smaller vessels.
The system is managed and supervised through Control Panel M 4.3. The Control Panel
M 4.3 is mounted separately from the fire alarm cabinet.
5102002-02A
Salwico Workboat CI
Salwico Workboat CI is a conventional fire detection system with 8 fire detector sections SOLAS compliant. Tested and certified by all major classification societies, this
system provides an optimal fire detection solution for smaller vessels.
5102013-01A
12
The system is managed and supervised through Control Panel M 4.3. The Control Panel
M 4.3 is mounted on the front of the fire alarm cabinet.
Salwico Fire Detection System
Salwico Workboat CE
Salwico Workboat CE is a conventional fire detection system with 8 fire detector
sections SOLAS compliant. Tested and certified by all major classification societies, this
system provides an optimal fire detection solution for smaller vessels.
The system is managed and supervised through Control Panel M 4.3. The Control Panel
M 4.3 is mounted separately from the fire alarm cabinet.
5102013-02A
Accessories
PSU Kit Workboat 5A DC/DC
This PSU Kit provides ultimate isolation and voltage regulation of power supply to Salwico Workboat centrals when 24VDC power is used as the only supply of the central.
Only one PSU kit is to be used per power supply channel, i.e. in case when both main
and Emergency supply is 24VDC it will be necessary to install two PSU Kits.
Features
• 24VDC 5A adjustable
• Long lifetime insured
• Status supervision and indication
• Installations kit included
The PSU kit is suitable for all versions of Salwico Workboat fire alarm centrals.
5102021-20A
Relay Kit Workboat
The relay kit is used to convert 24VDC powered outputs of I/O 700 Module into dry
relay contact outputs. When so is needed this outputs can be used as control outputs
controlling various external devices from Salwico Workboat fire detection central unit.
Features
• Breaking Capacity 250 VAC 6A
• 2 Pole
• LED Status indicator
• DIN-Rail mounted
• Installations cable kit included
5102024-00A
13
Salwico Fire Detection System
Central Unit Accessories
Log Printer
OKI ML280
The ML280 elite is a fast and robust log-printer. It can be connected to all Salwico
fire and gas alarm systems that has a RS232 printer output. aper can be fed from the
bottom, from the behind or from the top. Single sheet paper or continuous paper can
be used. The cable connections are on the back of the printer. The robust construction
makes the ML280 elite suitable for harsh environments
7680
Mini printer
The mini printer is an embedded printer to the fire detection central and very silent
through direct thermal printing method. The printer has an abundant figure/curves/characters print function and a copy function of LCD screen.
5200087-00A
Loop installation unit
SE3000+ Loop test unit
SE3000+ is a small hand hold test device for Salwico Fire Alarm Systems. It can be used
to execute two different tests, a loop test and a loop unit test. The loop test automatically boots the complete loop and searches all addresses on the loop. All the information found about the addresses is saved in a list, which can be printed out or scrolled
through on the display. The loop unit test searches for the manually requested address
and immediately displays all information found about the unit. More information about
SE3000+ can be found in the manual SE3000+ User Guide (part no 046481) and in
the Short Guide printed on the bottom of the device.
047480
14
Salwico Fire Detection System
Interfaces
ST Interface M
ST Interface M is used for interfacing “old Servoteknikk” loops into the new Salwico
systems. Perfect solution for retrofitting elderly systems with newer central cabinet. This
Module can be used in combination with virtually any Salwico addressable central. One
such module is required per each addressable loop.
5100433-02A
Standard communication protocols
Standard communication protocols available for integrations with other systems
• NMEA 0183
• MODBUS RTU
• MODBUS TCP/IP
• ESPA 444
Addressing Tool
EV-AD 2 addressing tool
The Evolution Address Programmer is used to set the address in Salwico Evolution fire
alarm detectors in a marine environment (Hard Customer Code 2). The detector is
attached to the programmer. The procedure to set or change the address takes only a
few seconds. The EV-AD2 requires two 9 V PP3 non-rechargeable alkaline batteries. The
programmer indicates when the battery is low.
5200123-00A
Addressable Detectors
EV-P Analogue Addressable Optical Smoke Detector
040020
Salwico EV-P is an analogue addressable smoke detector with an optical chamber. It is
designed to give early warning for the presence of smoke in the supervised area. At the
same time the detector offers a high protection against unwanted alarms. Salwico EV-P
is equipped with OMNIVIEW 360° LED indicator giving a clear, full 360° visibility of the
red alarm indication. The detector can be placed in harsh environments if it is mounted
on a splash proof base. The technical detector address is set with a special programming tool, valid addresses are 1-254. Salwico EV-P has a fine pitch net which improves
the response to smoke and also reduces the amount of dust etc. entering the detector.
Salwico EV-P is equipped with an output for remote indication.
15
Salwico Fire Detection System
040030
EV-PH Analogue Addressable Optical Dual Smoke/Heat Detector
for dry space IP22
Salwico EV-PH is an analogue addressable combined optical smoke and heat detector.
It is designed to give early warning for the presence of heat and smoke in the supervised area. Both heat and smoke alarm can be generated individually. At the same time
Salwico EV-PH offers a high protection against unwanted alarms. Salwico EV-PH is
equipped with OMNIVIEW 360° LED indicator giving a clear, full 360° visibility of the
red alarm indication. The detector can be placed in harsh environments if it is mounted
on a splash proof base. The technical detector address is set with a special programming tool, valid addresses are 1-254. Salwico EV-PH has a fine pitch net which improves
the response to smoke and also reduces the amount of dust etc. entering the detector.
Salwico EV-PH is equipped with an output for remote indication.
EV-DPH-A2R
Salwico EV-DPH-A2R is an analogue addressable smoke and heat detector with a dual
wavelength optical chamber. Two light sources with different wavelengths are used,
giving the detector a stable reaction to different kinds of smoke and making it insensitive to unwanted alarms caused by e.g. water steam. Salwico EV-DPH-A2R is equipped
with Omniview™ 360° LED indicator giving a clear, full 360° visibility of the red alarm
indication. The technical detector address is set with a special programming tool. Valid
addresses are 1-254. Salwico EV-DPH-A2R is equipped with an output for remote
indication.
40050
EV-H/A1R 54°C Analogue Addressable Heat
040000
Salwico EV-H is an analogue addressable heat detector. Salwico EV-H is designed to
give early warning for he presence of heat in the supervised area, and is available in two
temperature classes: A1R (fixed 54°C + rate of rise 0.8°C/min) and CS (fixed 84°C),
see separate part no. for 84°C.Salwico EV-H is equipped with OMNIVIEW 360° LED
indicator giving a clear, full 360° visibility of the red alarm indication. The detector can
be placed in harsh environments if it is mounted on a splash proof base.The technical detector address is set with a special programming tool, valid addresses are 1-254.
Salwico EV-H is equipped with an output for remote indication. For detailed information
about appropriate systems for the detector, see separate document “Compatibility of
Loop Units/System”.
EV-H A1R 54ºC IP67
40001
16
Salwico EV-H is an analogue addressable heat detector moulded together with base
adapter SPB-ADAPT to fulfil IP67. Salwico EV-H is designed to give early warning for
the presence of heat in the supervised area, and is available in two temperature classes:
A1R (fixed 54°C + rate of rise 0.8°C/min) and CS (fixed 84°C), see separate part no.
for 84°C. Salwico EV-H is equipped with OMNIVIEW 360° LED indicator giving a clear,
full 360° visibility of the red alarm indication. The detector can be placed in harsh environments if it is mounted on a splash proof base. The technical detector address is set
with a special programming tool, valid addresses are 1-254. Salwico EV-H is equipped
with an output for remote indication. For detailed information about appropriate systems for the detector, see separate document “Compatibility of Loop Units/System”.
Salwico Fire Detection System
EV-H A1R 54ºC IP67 SCI
5100472-00A
Salwico EV-H is an analogue addressable heat detector molded together with base
adapter SPB-ADAPT SCI to fulfill IP67 ingress protection class. Salwico EV-H is designed
to give early warning for the presence of heat in the supervised area, and is available in
two temperature classes: A1R (fixed 54°C + rate of rise function according to EN545) and CS (fixed 84°C), see separate part no. for 84°C. Salwico EV-H is equipped
with OMNIVIEW 360° LED indicator giving a clear, full 360° visibility of the red alarm
indication. The technical detector address is set with a special programming tool. Valid
addresses are 1-254. Salwico EV-H is equipped with an output for remote indication.
SPB-ADAPT SCI is developed to provide Short Circuit Protection in the detector base.
Short Circuit Isolator function is fully transparent and do not require any setting. Short
Circuit Isolator protects the loop cable from short circuit by breaking positive side of
loop cable.
EV-H/CS 84°C Analogue Addressable Heat
040005
Salwico EV-H is an analogue addressable heat detector. Salwico EV-H is designed to give
early warning for the presence of heat in the supervised area, and is available in two
temperature classes: CS (fixed 84°C) and A1R (fixed 54°C + rate of rise 0.8°C/min),
see separate part no. for 54°C. Salwico EV-H is equipped with OMNIVIEW 360° LED
indicator giving a clear, full 360° visibility of the red alarm indication. The detector can
be placed in harsh environments if it is mounted on a splash proof base. The technical detector address is set with a special programming tool, valid addresses are 1-254.
Salwico EV-H is equipped with an output for remote indication. For detailed information
about appropriate systems for the detector, see separate document “Compatibility of
Loop Units/System”.
EV-H CS 84ºC IP67
40006
Salwico EV-H is an analogue addressable heat detector moulded together with base
adapter SPB-ADAPT to fulfil IP67. Salwico EV-H is designed to give early warning for
the presence of heat in the supervised area, and is available in two temperature classes:
CS (fixed 84°C) and A1R (fixed 54°C + rate of rise 0.8°C/min), see separate part no.
for 54°C. Salwico EV-H is equipped with OMNIVIEW 360° LED indicator giving a clear,
full 360° visibility of the red alarm indication. The detector can be placed in harsh environments if it is mounted on a splash proof base. The technical detector address is set
with a special programming tool, valid addresses are 1-254. Salwico EV-H is equipped
with an output for remote indication. For detailed information about appropriate systems for the detector, see separate document “Compatibility of Loop Units/System”.
EV-H CS 84ºC IP67 SCI
5100470-00A
Salwico EV-H is an analogue addressable heat detector molded together with base
adapter SPB-ADAPT SCI to fulfill IP67 ingress protection class. Salwico EV-H is designed
to give early warning for the presence of heat in the supervised area, and is available in
two temperature classes: CS (fixed 84°C+ rate of rise function according to EN54-5)
and A1R (fixed 54°C ), see separate part no. for 54°C. Salwico EV-H is equippe with
OMNIVIEW 360° LED indicator giving a clear, full 360° visibility of the red alarm
indication. The technical detector address is set with a special programming tool. Valid
addresses are 1-254. Salwico EV-H is equipped with an output for remote indication.
SPB-ADAPT SCI is developed to provide Short Circuit Protection in the detector base.
Short Circuit Isolator function is fully transparent and do not require any setting. Short
Circuit Isolator protects the loop cable from short circuit by breaking positive side of
loop cable.
17
Salwico Fire Detection System
EV-PP/OA130
The detector is an analogue addressable optical smoke and heat detector. The smoke
and heat detector functions are independent and can be used in any required combination. The detector is designed to give early warning for the presence of heat and smoke
in the supervised area. The detector offers a high protection against unwanted alarms.
The low profile combined with the Omniview™ 360° alarm indication makes the
detector suitable for sites with high architectural requirements. The address is set by an
8-way DIP-switch. The detector comes in different versions depending which detector it
replaces.
040200
AC-IR-3Fq Triple-IR Flame detector
5200236-00A
The AC-IR-3Fq is a triple frequency conventional infrared flame detector produced using the latest in manufacturing technology. The Detector is using infrared elements suitable for the detection of smokeless combustible liquid and gas fires, as well as smokeforming open fire involving carbonaceous materials as contained in wood, plastics, gases,
oil products etc. The Fire evaluation process is done by triple Infrared (3Fq) sensor, protected by a sapphire glass filtering >6.0μm wavelength radiation. Sensor measures the
hot carbon dioxide in a specific flame wavelength; the B and C sensors simultaneously
measure the interference radiation in near wavelengths. This technique together with
intelligent signal processing through microprocessor and custom algorithms, achieves
excellent detection reliability while maintaining the highest immunity to interference
radiation and sunlight.
Accessories
SUM-2, Local Buzzer for Addressable detectors
The SUM-2 is a buzzer unit developed for the addressable detectors RDJ-2T, OA120,
OA130, IA120, IA130, NS-AIS, NS-AOS, NS-AIHS, NS-AOHS, NS-AH/AIS, NS-AH/CS
NS-AUV, EV-H, EV-P, EV-PH and EV-DP. There is no limitation to the number of detectors on a loop that can be equipped with a buzzer, each can have a SUM-2 buzzer
attached to it. For CS3000 two of these buzzers can be defined and controlled via
external control. A maximum of three buzzers can be imultaneously activated on the
same loop. For CS4000 and NSAC-1 a maximum of 50 buzzers can be activated simultaneously on the same loop.
044577-2
Short circuit isolator
Salwico NMI SCI
5200315-00A
18
NMI SCI is a short circuit isolator for montage on 5mm DIN-rail. Developed to provide
short circuit protection of loop cable and devices, specifically in cases when detectors
detour from loop path. The unit is designed for use in dry and clean spaces. NMI SCI
can only be used on addressable loops. Short Circuit Isolator function is fully transparent and does not require any settings. The short circuit isolator unit can be used for all
Salwico fire alarm systems. Features and benefits
• Small size
• DIN-Rail montage (acc. to EN50022)
• Easy termination access
• Quick and safe Short Circuit Isolation
Salwico Fire Detection System
Addressable manual call points
MCP-A SCI
5200030-02B
MCP-A SCI is an addressable manual call point for indoor environment, designed for
Salwico fire alarm systems. Pressing the glass causing it to crack activates the fire alarm.
A protective plastic coating on the glass prevents operator injury. An LED on the front
of the call point indicates the fire alarm. The LED remains lit until the fire alarm has
been reset on the fire alarm panel. The call point can be tested with a special key, included in the delivery. The address of the call point is set with a DIP-switch. MCP-A SCI
is developed to provide Short Circuit Protection. The Short Circuit Isolator function is
fully transparent and do not require any setting. In order to achieve IP23 the MCP-A
SCI shall be mounted on a smooth surface and the cable inlet/outlet shall be secured
against leakage.
MCP-A WP SCI
5200031-02B
MCP-A WP SCI is an addressable manual call point, designed for Salwico fire alarm
systems. The selected material PC/ABS and the encapsulation, with ingress protection
IP67, makes it very suitable for harsh environment. Pressing the glass causing it to crack
activates the fire alarm. A protective plastic coating on the glass prevents operator
injury. An LED on the front of the call point indicates the fire alarm. The LED remains
lit until the fire alarm has been reset on the fire alarm panel. The call point can also be
tested with a special key, included in the delivery. The address of the call point is set with
a DIP-switch. MCP-A WP SCI is developed to provide Short Circuit Protection. The
Short Circuit Isolator function is fully transparent and do not require
any setting.
Addressable I/O Units
IC44 WP
IO-unit with 4 inputs and 4 outputs in IP67 housing. Can control and
supervise single and double doors. Inputs support PNP and NPN sensors. Outputs of
relay type
5200268-00A
IC44 WPL
IO-unit with 4 inputs and 4 outputs in large IP67 housing. Can control and supervise
single and double doors. Inputs support PNP and NPN sensors. Outputs of relay type
5200269-00A
19
Salwico Fire Detection System
IC10
IO-unit in IP22 housing. Can be used as interface for conventional
alarming devices, control or indication.
5200272-00A
IC10 WP
IO-unit in IP22 housing. Can be used as interface for
conventional alarming device, control or indication
5200273-00A
TC10
Programmable timer unit used for the control or disablement of other devices.
5200276-00A
FP10 WP
Fire patrol unit in IP67 housing.
5200277-00A
20
Salwico Fire Detection System
FP10
Fire patrol unit in IP22 housing.
5200283-00A
IC21 WP
The IC21 WP is an addressable unit used for control and indication of fire doors, fire
dampers etc. in a fire alarm system. This unit has been designed for use in damp spaces.
IC21 WP can control and supervise both single and double doors. The unit includes two
inputs, one programmable output and one secondary output controlled by an external
switch. The loop address of the IC21 WP is set by a DIP-switch.
5200270-00A
IC21 WPL
The IC21 WPL (equipped with an extra large enclosure) is an addressable unit used for
control and indication of fire doors, fire dampers etc. in a fire alarm system. This unit has
been designed for use in damp spaces. IC21 WPL can control and supervise both single
and double doors. The unit includes two inputs, one programmable output and one
secondary output controlled by an external switch. The loop address of the IC21 WPL
is set by a DIP-switch.
5200278-00A
Conventional Detectors
EC-H/A2S 58°C CONV HEAT DET, dry space IP22
5200172-00A
The EC-H/A2S conventional heat detector belongs to Salwico EC range of detectors.
EC is a range of conventional detectors, which have been produced using the latest in
manufacturing technology and supplied with an array of advanced features. The EC-H/
A2S thermal detector uses a state of the art thermal element combined with an application specific integrated circuit (ASIC) to provide quick and accurate detection of
fires. The detector incorporates a static element and is suitable where ambient conditions normally exhibit rapid changes in temperature e.g. galley. The EC-H/A2S detector
also has an integral LED, which illuminates to provide a local alarm signal. An optional
remote LED annunciator may be used to repeat any alarm signal.
21
Salwico Fire Detection System
EC-H/BS 78°C CONV HEAT DET, dry space IP22
The EC-H/BS conventional heat detector belongs to Salwico EC range of detectors.
EC is a range of conventional detectors, which have been produced using the latest in
manufacturing technology and supplied with an array of advanced features. The EC-H/
BS thermal detector uses a state of the art thermal element combined with an application specific integrated circuit (ASIC) to provide quick and accurate detection of fires.
The detector incorporates a static element and is suitable where ambient conditions
normally exhibit rapid changes in temperature e.g. galley. The EC-H/BS detector also has
an integral LED, which illuminates to provide a local alarm signal. An optional remote
LED annunciator may be used to repeat any alarm signal.
5200173-00A
EC-H/A1R 58°C ROR CON HEAT DET, dry space IP22
5200174-00A
The EC-H/A1R conventional heat detector belongs to Salwico EC range of detectors.
EC is a range of conventional detectors, which have been produced using the latest in
manufacturing technology and supplied with an array of advanced features. The EC-H/
A1R thermal detector uses a state of the art thermal element combined with an application specific integrated circuit (ASIC) to provide quick and accurate detection of
fires. The detector incorporates both rate of rise and static elements and is suitable for
all areas where the ambient conditions do not normally exhibit rapid changes in temperature. The EC-H/A1R detector also has an integral LED, which illuminates to provide
a local alarm signal. An optional remote LED annunciator may be used to repeat any
alarm signal.
EC-P CONV OPTICAL SMOKE DET, Dry Space IP22
The EC-P photoelectric smoke detector belongs to Salwico EC range of detectors.
EC-P is a range of conventional detectors, which have been produced using the latest
in manufacturing technology and supplied with an array of advanced features. The EC-P
photoelectric smoke detector uses a state of the art optical chamber combined with
an application specific integrated circuit (ASIC) to provide quick and accurate detection
of fires. A combination of the unique chamber design and other technically advanced
features will significantly extend the service intervals before cleaning of the detector
becomes necessary.
5200175-00A
EC-PH/A1R 58°C ROR OPT S/H DET, Dry Space IP22
The EC-PH/A1R multi-criteria detector belongs to EC range of detectors. Salwico EC is
a range of conventional detectors, which have been produced using the latest in manufacturing technology and supplied with an array of advanced features. The EC-PH/A1R
multi-criteria detector uses a state of the art optical chamber and a thermal element
combined with a microprocessor, running sophisticated algorithms to provide quick and
accurate detection of fires. The combination of photoelectric and thermal characteristics
provides a faster response to ‘real fire’ situations, while at the same time reducing the
risk of unwanted environmentally generated alarms.
5200176-00A
22
Salwico Fire Detection System
HC100 A2 Conventional Heat Detector (57°DegC)
The HC100 A2 is a conventional heat detector for use with all Salwico Fire Alarm Systems. The detector is with its low profile and smooth design very suitable in locations
with high architectural requirements such as offices, restaurants, hotel rooms and cabins.
The heat sensing element is of thermistor type with a short response time to changes
in the ambient temperature. Alarms are optically indicated until they are reset on the
central. The detector is environmentally adapted in aspects of the selection of material
and design. The detector is polarisation independent (unless the remote output is used)
which simplifies the installation. The mesh is very easy to change and clean which simplifies maintenance.
038000
HC100 A2 Conventional Heat Detector (57°DegC) IP67
38005
The HC100 A2-IP67 is a conventional heat detector for use with all Salwico Fire Alarm
Systems. It is delivered complete with adapter and base. In this version of HC100 the
detector and adapter are moulded together and filled with a special moulding compound that gives it high resistance against dampness and vibrations. The detector cannot
be separated from the adapter. The HC100 A2-IP67 is suitable for location in harsh environments. The heat sensing element is of thermistor type with a short response time
to changes in the ambient temperature. Alarms are optically indicated until they are
reset on the central. The detector is environmentally adapted in aspects of the selection of material and design. The detector is polarisation independent (unless the remote
output is used) which simplifies the installation.
HC/100 D Conventional Heat detector head (100°DegC)
038020
The HC100 D is a conventional heat detector for use with all Salwico Fire Alarm Systems. The detector is with its low profile and smooth design very suitable in locations
with high architectural requirements such as offices, restaurants, hotel rooms and cabins.
The heat sensing element is of thermistor type with a short response time to changes
in the ambient temperature. Alarms are optically indicated until they are reset on the
central. The detector is environmentally adapted in aspects of the selection of material
and design. The detector is polarisation independent (unless the remote output is used)
which simplifies the installation. The mesh is very easy to change and clean which simplifies maintenance.
SWM-1KL/140, Conventional Heat Detector (140°DegC)
The SWM-1KL 140 is a fixed temperature heat detector, designed for use in damp
spaces. It contains a bimetallic thermostat, which closes its contacts at alarm temperature. The detector is also available in versions with lower alarm temperature (57, 80 and
100°C) and in an intrinsically safe version, SWM-1KL/IS, see separate datasheets.
037174
23
Salwico Fire Detection System
AC-IR-3Fq Trippel-IR Flame detector
5200236-00A
The AC-IR-3Fq is a triple frequency conventional infrared flame detector produced using the latest in manufacturing technology. The Detector is using infrared elements suitable for the detection of smokeless combustible liquid and gas fires, as well as smokeforming open fire involving carbonaceous materials as contained in wood, plastics, gases,
oil products etc. The Fire evaluation process is done by triple Infrared (3Fq) sensor, protected by a sapphire glass filtering >6.0μm wavelength radiation. Sensor measures the
hot carbon dioxide in a specific flame wavelength; the B and C sensors simultaneously
measure the interference radiation in near wavelengths. This technique together with
intelligent signal processing through microprocessor and custom algorithms, achieves
excellent detection reliability while maintaining the highest immunity to interference
radiation and sunlight.
Manual Call Points
MCP-C (GB) Conventional Manual Call Point for wet space IP24
The MCP-C is a manual call point for indoor environment and is designed for the
Salwico conventional fire alarm systems. Pressing the glass causing it to crack activates
the fire alarm. A protective plastic coating on the glass prevents operator injury. The call
point can be tested with a special key included in the delivery.
5200010-01A
MCP-C WP (GB) Conventional Manual Call Point for wet space IP67
The MCP-C is a manual call point for outdoor environment and is designed for the Salwico conventional fire alarm systems. The selected material PC/ABS and the encapsulation, with ingress protection IP67, makes it very suitable for harsh environment. Pressing
the glass causing it to crack activates the fire alarm. A protective plastic coating on the
glass prevents operator injury. The call point can be tested with a special key included in
the delivery.
5200014-01A
Equipment For Hazardous Areas, Zone 0-1
N1770
24
NS-ISOLATOR Intrinsically Safe Isolator for Conventional IS Loop Units
with NS-AIN1 Address Unit IP55, Max 10 loop units/isol.
NS-ISOLATOR is a Pepperl-Fuchs Type KFD0-CS-Ex1.51P isolator, which is part of the
Salwico conventional intrinsically safe fire detection system. The NS-ISOLATOR barrier
is located in a non-hazardous area (safe area) and forming the interface to IS detectors
and other IS line units. The NS-ISOLATOR does not need a separate power supply. It
is powered directly from the fire alarm panel via the loop/section cables, which means
that no extra cables are needed. The NS-ISOLATOR does not need an earth connection, and thus routine inspection of earth cable and connections is eliminated. The box
has knock-out holes on the sides for the three included cable glands. The glands must
be mounted on the short sides of the box as shown in this data sheet
Salwico Fire Detection System
N1790
ISOLATOR-A Intrinsically Safe Isolator with enclosure for Addressable IS
Loop Units IP55, Max 20 loop units/isol.
ISOLATOR-A is an IS isolator intended for use together with Salwico intrinsically safe
addressable detectors and manual call points. It contains an IS-isolator and a LISA-2
connection board. ISOLATOR-A is located in a non-hazardous area (safe area) and
forming the interface to IS detectors and other IS line units. To each addressable detector loop a maximum of five ISOLATOR-A units can be connected, each of them
accommodating up to 20 IS line units. ISOLATOR-A does not need a separate power
supply or earth connection. It is powered directly from the fire alarm panel via the loop
cable, which means that no extra cables are needed. The cable glands shall be mounted
acc. to the dimension drawing on page two. This will guarantee the minimum required
distance (50mm) between the intrinsic safe and the non-intrinsic safe conductors.
NS-AOHS-IS Analogue Addressable Intrinsically Safe Optical Smoke/Heat
N11250
NS-AOHS-IS is an intrinsically safe analogue addressable multi sensor detector for
Salwico fire alarm systems. It has two separate analogue sensor elements. One optical
for smoke detection and one heat-sensing element for heat detection. Alarm condition is indicated on the detector via a red LED. The LED is lit until the alarm has been
reset on the control panel. The address is set with a DIP switch, which is mounted on
the backside of the detector. NS-AOHS-IS is connected to the detector loop via the
ISOLATOR-A, part. no. N1790. Up to 20 addressable IS units can be connected to one
ISOLATOR-A. It is not possible to connect any remote LED indicator to NS-AOHS-IS.
EVC-PY-IS Conventional intrinsically Safe Optical Smoke Detector
Salwico EVC-PY-IS is an intrinsically safe Evolution conventional optical smoke detector. The detector is equipped with an optical sensor with improved sensitivity to black
smoke. The detector is designed for use in areas with high explosion risk. It is connected
to the fire alarm system via an intrinsically safe interface. Salwico EVC-PY-IS must not
be separated from the base when energized. To avoid the possible risk of electrostatic
charge, the unit must not be cleaned with solvents or charged by rubbing.
N1144
HC100/IS Intrinsically Safe Conventional Heat (57°DegC) Detector
The HC100 A2 is an intrinsically safe conventional heat detector for use with all Salwico
Fire Alarm Systems. The detector is designed for use in areas with high explosion risk. It
is connected via an intrinsically safe interface. The heat sensing element is of thermistor
type with a short response time to changes in the ambient temperature. Alarms are
optically indicated until they are reset on the central.
038010
25
Salwico Fire Detection System
ACP-IS Intrinsically Safe Addressable Manual Call Point
for wet space IP67
ACP-IS is an intrinsically safe addressable manual call point for the fire alarm systems
CS3000, CS4000 and NSAC-1. ACP-IS is connected to the detector loop via ISOLATOR-A. Up to 20 addressable IS units can be connected to an ISOLATOR-A. Pressing
the glass causing it to crack activates the fire alarm. The call point can also be tested
with a special key, included in the delivery. A red LED on the front of the call point
indicates the fire alarm. The LED remains lit until the glass has been replaced and the
fire alarm has been reset on the control panel. The address of the call point is set with a
DIP-switch. Clean the manual call point by using a damp cloth.
60060-001010
Equipment For Hazardeous Areas, Zone 2
NS-AOHS-Exn Analogue Addressable Dual Optical Smoke and Heat De-
tector for wet space IP55
NS-AOHS-Exn is an analogue addressable multi sensor detector for Salwico fire alarm
systems CS3000*, CS4000 and NSAC-1. It has two separate analogue sensor elements,
one optical for smoke detection and one heat-sensing element for heat detection.
Alarm condition is indicated on the detector via a red LED. The LED is lit until the alarm
has been reset on the control panel. The detector is polarity independent. The address
is set with a DIP switch, which is mounted on the backside of the detector. NS-AOHSExn must not be separated from the base when energized.
N11255
NS-ACPWP-Exn Addressable Manual Call Point for wet space IP67
N11320
ACPWP-Exn is a Manual call point for the addressable fire alarm systems CS4000,
NSAC-1 and CS3000 with SPK2000. The selected material PC/ABS and the encapsulation, with ingress protection IP67, make it suitable for very harsh environment. Pressing
the glass causing it to crack activates the fire alarm. The call point can also be tested
with a special key, included in the delivery. A red LED on the front of the call point
indicates the fire alarm. The LED remains lit until the glass has been replaced and the
fire alarm has been reset on the control panel. The address of the call point is set with
a DIP-switch. ACPWP-Exn is polarity independent which simplifies the installation. The
apparatus must be located in an area with low risk of mechanical danger.
NS-ACP-Exn Addressable Manual Call Point for wet space IP55
N11321
26
The ACP-IP55-Exn is a manual call point for the addressable fire alarm system Salwico
CS4000, CS3000* and NSAC-1.The ingress protection IP55 makes this call point suitable for harsh environments. Pressing the glass causing it to crack activates the fire alarm.
A protective plastic coating on the glass prevents operator injury. A red LED is lit on the
call point when the control panel has received the alarm. It will be lit until the glass has
been replaced and the alarm has been reset at the control panel. The address is set with
a DIP-switch mounted inside the call point. The call point is polarity independent. The
apparatus must be located in an area with low risk of mechanical danger.
Salwico Fire Detection System
NS-SCI-Exn, IP55
The SCI-Exn is an analogue addressable short circuit isolator for the NSAC-1, CS3000
and CS4000 fire alarm system. The fire detection loops are divided into fire detection
zones by short circuit isolators. If a short circuit occurs on a loop cable, the zone with
the short circuit is disconnected from the rest of the loop by the SCI units mounted
in the beginning and in the end of the zone. When a short circuit is detected, a yellow
LED on the PCB is lit. The LED is lit until the fault has been remedied and reset at the
control panel. The address is set with a DIP-switch. The SCI-Exn is polarity dependent.
N11890
Base Plates
UB-6 SCI
5200313-00A
UB-6 SCI is a low profile detector base for all type of analogue addressable detectors
of EV-Series. The base plate is made for use in dry and clean spaces. The cable entry is
from the center or from the side of the base. UB-6 SCI is developed to provide Short
Circuit Protection in the detector base. Short Circuit Isolator function is fully transparent and do not require any setting. For more information about other available bases,
see separate document “Base matrix”. The detector base can be used for all Salwico fire
alarm systems. Features and benefits
• Low profile
• Quick and safe Short Circuit Isolation
SPB-ADAPT SCI
5200314-00A
SPB-ADAPT SCI is an adapter for the bases 2IP55 (part no. 046950) and NS-2IP55
(part no. 046900). SPB-ADAPT SCI is developed to provide Short Circuit Protection
in the detector base. Short Circuit Isolator function is fully transparent and do not
require any setting. Smoke, heat and flame detectors can be connected to this adapter.
For more information about suitable bases, see separate document “Base matrix”. The
adapter can be used for all Salwico fire alarm systems. Features and benefits
• Waterproof installation for harsh environment
• Quick and safe Short Circuit Isolation
• Small Firm Factor
NS-ADAPT-IS, Adaptor for IP-55 base with N1140
The NS-ADAPT-IS is an IS (intrinsically safe) adapter for the base NS-2IP55 (part no.
46900) or 2IP55 (part no. 46950). Only IS-detectors can be connected to this adapter.
The adapter can be used for both addressable and conventional fire alarm systems. The
NS-ADAPT-IS has an IS-label on the side. NB! The classification society might have additional installation requirements than what is mentioned in this data sheet.
N1422
27
Salwico Fire Detection System
NS-ADAPT-IS2, Adaptor for IP-55 base with N11250
The ADAPTER AOHS-IS is an adapter for IP55 detector bases. Only detector AOHS-IS
can be connected to this adapter. The adapter can be used for Salwico addressable fire
alarm systems CS3000, CS4000 and NSAC-1. The ADAPTER AOHS-IS has an IS-label
on the side. NB! The classification society might have additional installation requirements
than what is mentioned in this data sheet.
N1430
NS-2IP55, Base plate with cable glands, IP-55
The 2IP55 is a base for all Salwico IP55 detector adapters. Together with the adapters it
is possible to install smoke, heat and flame detectors in harsh
environment with an ingress protection up to IP55. It can be used for both addressable
and conventional fire alarm systems.
046950
EV-SPB-BI Base Adapter with Short Circuit Isolator
Salwico EV-SPB-BI is an Evolution addressable short circuit isolator in an adapter for
watertight bases. It is to be used as an interface for conventional and analogue addressable fire detectors. EV-SPB-BI is a watertight variant of
base EV-BI. With a conventional detector fitted on the base adapter, the address of the
isolator will be displayed by the system upon fire alarm. Removal
of the detector will also be detected and reported as a fault. The technical address is set
with a special programming tool. Valid addresses are 1-254.
5200098-00A
AC-IR-3Fq Conventional Base for AC-IR-3Fq detector
AC-IR-3Fq Conventional Base is suitable for installation of AC-IR-3Fq Detector in a
harsh environment. The base plate provides ingress protection up to IP67, when lock
screws are used. This base provides a termination possibility, for detector set in conventional mode.
Features
• IP65/IP67 Ingress protection
• Low current draw
• Suitable for installation in harsh environment
• Remote LED Option
5200235-00A
28
Salwico Fire Detection System
AC-IR-3Fq Addressable Base for AC-IR-3Fq detector
AC-IR-3Fq Addressable Base is suitable for installation of AC-IR-3Fq Detector in a harsh
environment. The base plate provides ingress protection up to IP67, when lock screws
are used. The base provides a termination possibility, for detector set in Addressable
mode. The address is set by an 8-way DIP-switch.
5200237-00A
Features
• IP65/IP67 Ingress protection
• Low current draw
• Suitable for installation in harsh environment
EC-BASE Detector base for dry spaces IP22
The EC-Base is a low profile base plate for smoke and heat detectors from Salwico EC
range of detectors. It is equipped with an integrated 470 Ohm serial resistor for installation of EC-type detectors. This detector base is made for use in dry and clean
spaces.
5200177-00A
Features:
• Low profile design
• Compatible with all detectors from EC- range
• Tamper resistant feature
• Detector removal detection
• Remote LED Option
EC-ADAPT Detector adapt for wet spaces
The EC-Adapt is a connection adapter with an integrated 470Ohm serial resistor for
installation of EC-type detectors on the IP55 base NS-2IP55 (part no. 46900) or 2IP55
(part no. 46950). This adapter is used for connection of EC-type detectors to the conventional fire alarm system, in an IP55 environment.
5200178-00A
Test equipment
Smoke detector tester
Insert the canister into the smoke dispenser. Lock into place using the screw mechanism. Place the cup over the detector and discharge spray (not more than 1 second)
with a slight upward movement. Repeat this action without removing the cup every 10
seconds for max 1 minute, until the detector is in alarm.
N1738
29
Salwico Fire Detection System
Cordless Heat detector tester kit (recommend)
The Salwico SOLO 461 is a cordless heat detector tester for the Salwico heat detectors. The tester suits point type, rate of rise, fixed temperature and combination
detectors up to 90°C. Under the control of a microprocessor, blown air is heated by
the element just before exiting the duct. This minimise the possibility of heat damage
the plastic of the detector. The tester is activated when an infra-red beam is broken by
the detector. For battery charging instruction and general information, see the manual
delivered in the box.
N1743
UV Test lamp EEx ia II CT4
The W8066 Ultraviolet (UV) test lamp is a portable, battery operated source of UV
radiation that is used for periodic testing of ultraviolet flame detectors.
The intrinsically safe device simulates a fire by producing a beam of UV radiation with
the same wavelength as the response range of the UV detectors, enabling the operator to verify proper system operation without the need for an open flame. The physical
characteristics of the W8066 are comparable to a common flashlight, making it easier to
handle and operate than other test lamps. The test lamp typically actuates a UV detector at a distance of approximately 10 meters.
001150
UV Test lamp Portable
Salwico UV test lamp is used to perform function test on Salwico UV flame detectors.
Salwico UV test lamp is delivered complete with rechargeable batteries and a battery
charger.
001155
IR Test lamp Incl.rod
The Salwico IR test lamp is used to perform function test on Salwico IR flame detector.
The extension rods packed in a nylon case makes it possible to easily test the detector
in all environments.
001156
30
Salwico Fire Detection System
Testifire 1001-101 Multi Detector Tester for both Smoke/Heat
Testifire is a multi-stimulus detector tester, suitable for testing of optical/photoelectric
and ionisation smoke detectors and thermal detectors (fixed temperature or rateofrise). The detectors can be either conventional or analogue addressable. Testifire is also a
functional tester that enables testing of multi-detectors or multi-criteria detectors from
a single test unit. Testifire creates stimuli that the detectors are designed to detect.
5200112-00A
Test equipmane accessories
Testifire Smoke Capsule 6pcs
Testifire generates its non-toxic smoke stimulus from a specially formulated, fluid supplied in a replaceable non pressurised capsule. The number of tests from a capsule is
dictated by the response time of the detectors under test and can range between 500
and 1,000 tests. Although there is much more to the comparison than material cost,
typically this equates to between two and five times that produced by an aerosol.
5200114-00A
Pole Solo 1,2 mtrs / Pole Solo100 1-6 mtrs stronger than 9151
Pole adapter / Pole 1.4 - 4.0 mtrs
The core element of the Solo range is the telescopic and extension access poles which
are extremely lightweight and quickly extend to provide access to detectors up to 9
metres. • Light - easy to use at height, on-site, day after day • Non-whip • Certified
non-conductive - protecting both the engineer and overhead live equipment from inadvertent shorts • Available in one, two or four telescopic sections • Lifetime warranty
N1740, N1741
N1744, 009151
Test gas bottle, aerosol, 150 ml, for Solo 330
The professional’s choice - the Solo A3 is a clean synthetic aerosol that delivers particles replicating those found in real smoke to detector. Provided in a 250ml canister it
is designed for use with the Solo 330 and Solo 332 dispenser. • UL & ULC listed •
Detector manufacturer endorsed • Non-flammable • Oil-free formulation • No
lasting residue • Fast activation and clearing time
009153
31
Salwico Fire Detection System
General Alarm Devices
NS-GA2 General Alarm Push Button Auto/Manual for dry space IP22
The general alarm push button NS-GA2 is designed for use in dry spaces. The NS-GA2
can be wall- or recessed mounted. It is delivered c/w box for wall mounting.
A plastic lid protects it from unintentional activation. NS-GA2 has dual functions:
• Auto: Activates the pre-programmed general alarm pattern. The button will stay active until it is pressed again.
• Manual: Activates the audible alarm as long as it is pressed (momentary activation).
N1307
NS-GA2/IP55 General Alarm Push Button Auto/Manual
for wet space IP55
The general alarm push button NS-GA2/IP55 is designed for use in harsh environments.
The NS-GA2/IP55 is wall mounted and a plastic lid protects it from unintentional activation.
NS-GA2/IP55 has dual functions:
• Auto: Activates the pre-programmed general alarm pattern. The button will stay active
until it is pressed again.
• Manual: Activates the audible alarm as long as it is pressed (momentary activation).
NS-GA2/IP55 is delivered c/w two cable glands.
N1308
Bells
MBA6, alarm bell
Salwico MBA-6 alarm bell is intended for use with all Salwico fire alarm systems. The
Salwico MBA-6 has a very high volume output matched with extremely low power
consumption. The specially designed weatherproof bell has an aluminium back box with
a built-in 230Vac to 24 Vdc weatherproof mains pack (BBX-4) that allows the bell to be
powered directly from a mains supply.
The back box is given either single or double treaded for maximum flexibility in installation.
006143
006144
6”, red, 230VAC
8”, red, 230VAC
BBX, conn. box, for 6131-34, IP65
The fire alarm bells are suitable for both indoor and outdoor uses since the bells have
aluminium/plastic housings. The operating part of BE12–BE13 is a micro-motor and of
BE14–BE17 a two coil vibrator. All versions have low starting currents and very low
power consumption. If used in harsh environment the waterproof connection box
BE10, IP65, shall be used.
006135
32
Salwico Fire Detection System
Bell El. 6” 24VDC IP33 RED (MED)
A unique, patented alarm bell designed for use in fire, security and other signalling
systems. The combination of a miniature solenoid with an integrated control circuit allows excellent sound coverage, minimum current consumption and increased reliability.
The improved aesthetics make the bell suitable for all applications including the most
prestigious locations.
5100462-00A
Bell El. 6” 230VAC IP33 RED
A unique, patented alarm bell designed for use in fire, security and other signalling
systems. The combination of a miniature solenoid with an integrated control circuit allows excellent sound coverage, minimum current consumption and increased reliability.
The improved aesthetics make the bell suitable for all applications including the most
prestigious locations.
5100463-00A
Sounders
Siren 24 VDC
This sounder can be connected to all Salwico fire alarm systems. It has a range of
32 tones which is set by a DIP switch. It is also equipped with a volume control. The
sounder is pre-set to tone no. 14 (970 Hz, 101 dBA at 1 m). A second tone is available,
which can be switched in by the connection of a third core to the siren. The volume
control switch will provide two settings, either full output or an attenuation of
10dB. Features: • 102 dB(A) sound output • 32 tones (user selectable) • Volume
control • Two stage alarm • Automatic synchronisation • Lockable base • Suitable for
outdoor use
5100441-00A
5100444-00A
5100445-00A
IP65 White MED
IP65 Red MED
IP66 Red MED
NS-ES, electronic siren, 24VDC, IP66, red.
The NS-ES/IP66 is a low profile Benshee MT siren for fire and security alarm installations in harsh environments. The siren is delivered with two cable glands for cable
diameters ranging from Ø8 to Ø13 mm. The base has two knockout holes for the cable
glands. A sound selector for 32 user selectable tones and a volume control is fitted
inside the sounder. Recommended tone: No. 7, continuous at 950 Hz, 103 dBA, 12 mA.
N1525
33
Salwico Fire Detection System
DB3V02BR, alarm Siren/bell, Ex-proof, 24 VDC
006255
DB3V is a lightweight, flameproof sounder intended for use in potentially explosive
atmospheres. DB3 has been designed with high ingress protection to withstand harsh
environmental conditions. The flame paths, flare and body are manufactured completely
from UV stable glass reinforced polyester. Stainless steel screws and sinter are incorporated thus ensuring a corrosion free product. DB3V has a pre-programmed bell-tone
and integral volume control. DB3V is delivered without cable glands. DB3 fulfils the
following requirements:
• Eexde IIC T5
• ATEX, Ex II 2GD
• BASEEFA certified
DB3V is also available in GOST “R” & “K”, Chinese (CQST), Australian (SAA) and UL
models.
MKTV-75/800 typhoon
006305
006306
The pneumatic alarm typhoons in the KTV and MKTV series are a maintenance free,
light, rigid and powerful signalling apparatus for different applications on board ships. The
typhoons can be delivered as a complete unit or the horn and the solenoid valve as
separate units (see separate datasheet). For distinct signals, the piping
length between the valve and the horn should not exceed 6m. The horn is delivered
with wall bracket and filter. For explosive, corrosive or very hot areas the solenoid
valves shall be mounted separately outside the exposed area. The solenoid valve is delivered with filter and fittings for copper piping with Ø 10 mm OD. The solenoid valve
should not be placed outdoor without protective cover.
24 VDC, 800Hz
230 VAC, 800Hz
MKT-75/800 Typhoon without mag.valv. 800Hz
A penetrating sound means a sound capable of reaching a listener on a distant vessel
under normal noise conditions. From this respect, it is not only the sound pressure level
that is the important factor, but the content of appropriate frequency components in
the signal. This simple fact tells us that apart from the formal demand on the whistle having a sufficiently strong component within one 1/3 octave band (IMO regulations)
- there are other important factors too. The MKT-75/800 Typhoon have an efficient
sound spectrum fulfilling the highest demands - on vessels as well as in a great many
civil defence and disaster alarm stations on land.
006312
Multitone sound disc, mounted below UB-6
005303
34
Salwico 4800 fire alarm annunciator is specially made to fit between the UB-1 or B-2
fire detector base and the ceiling. The annunciator is 24 Vdc powered from the central or from a local control unit like CM22 or CM44. Salwico 4800 provides acoustical
alarms either in case dedicated annunciators are to be fitted for the fire alarm system,
or when it is required to have a local annunciator which completes the existing PA/
GA alarm system. Salwico 4800 contains an electronic sound generator which allows
choosing between 2 different tones, which complies with the various standards in use
worldwide. By feeding the Salwico 4800 through a third wire, it is possible to activate
an alternative sound to the one programmed, in way to get two different alarm tones,
depending on the case. Volume adjustment is possible by an internal control, in order to
set the desired sound pressure.
Salwico Fire Detection System
Lights
830, flash light, red, 230VAC, IP65
Salwico 830 is a flash light suitable for installation in harsh environments. Salwico 830 is
easy to install and has a long life time. Wall brackets and other colours on the lens and
are available upon request.
006502
SUE-9412A-1, flash light, red, 230VAC, Eexd IIBT4
The SUE9412A-1 is a series of EX classified flash lights designed for use in very harsh
environments, for example pump rooms on vessels.
006545
SOLEX flashlight 24 VDC red MED
5100443-00A
This flashlight can be connected to all Salwico fire alarm systems. It is an electronic
flashlight with low power consumption, small dimensions and easy to install. Solex flashlights are cost effective compliment to audible alarms for use in areas of high ambient
noise. Features:
• Wide operating voltage, 9-60 VDC
• Constant performance over voltage range
• Automatic synchronisation
• Lockable base
• Tamper switch option
• Suitable for outdoor use
828, flash light
Salwico 828 is a modern designed flashlight suitable for installation in harsh environments. Salwico 828 is easy to install and has a long lifetime. Tools are required to dismount the lens, which prevents sabotage. For installation on walls, use the separate wall
bracket part number 6514.
006512
5200073-00A
Red, 24VDC, IP65
Green, 24VDC, IP65
35
Salwico Fire Detection System
Combined Sounders and Lights
Horn w. Red Rot. Light 230V Exd IIC T6
5200117-00A
Heavy Duty Product of High Durability
• Signal sound built-in product of direct mounting type with bulb revolving warning
light and horn integrated.
• Employing aluminum housing with high durability and high anti-corrosion.
• Possible to select sound tone and control volume by using built-in sound tone
switch and volume controller.
• RPM : 120~140RPM(Controllable)
• Volume : MAX.118dB/m
• Protection Class : IP56
FLASHNI, Sounder & beacon, 32 tones, IP65
Flashni is a compact combination of a high output sounder and beacon for spaces
requiring both audible and visual indication of alarms. The ingress protection IP65 makes
it suitable for installation in harsh environment. The sounder can be set to 32 different tones. The tones are set with a DIP switch inside the unit. It is also equipped with a
volume control.
N1546
Siren beacon 24 VDC IP65 red MED
This unit is a compact combination of a high output sounder and beacon for spaces
requiring both audible and visual indication of alarms. It can be connected to all Salwico
fire alarm systems. The ingress protection IP65 makes it suitable for installation in harsh
environment. The sounder can be set to 32 different tones. The tones are set with a DIP
switch inside the unit. It is also equipped with a volume control.
Features:
• Up to 103dB(A) with built in Xenon flash
• Automatic sounder synchronisation
• Improved tone clarity, reducing confusion
5100442-00A
Door Control Accessories
GP721T+722, Door Holder Magnet, 200 kP, 24 V DC, with push button
The magnetic door holder consists of two parts, a door holder magnet, which is mounted on the wall, and an armature, which is mounted on the door. The door will be held
open as long as the current to the magnet is on. By breaking the current the magnet
will release its grip and a normal door closer closes the door.
007112
36
Salwico Fire Detection System
NS-DRP, Door Release, wall mounted WT, IP-55
This door release switch is made for harsh environments that require ingress protection
up to IP55. The switch is not spring loaded. Therefore it will stay in closed position until
it is manually set to open position.
N1781
NS-DRW, Fire Door Release Button, wall mounting
This door release switch is made for wall mounting in dry areas where recessed mounting is not possible. The switch is not spring loaded. Therefore it will stay in
closed position until it is manually set to open position.
N1779
NS-DRC, Door Release Button, recessed
This door release switch is made for recessed wall mounting in dry areas. It can be
mounted in a recessed mounting box with a diameter ranging from 58 - 68 mm.
The switch is not spring loaded. Therefore it will stay in closed position until it is manually set to open position.
N1780
Ventilation duct adapter
Calectro UG-3-NS-AOS (for EV-P), vent. duct adapter excl. tube and head
5200228-00A
UG-3 has been developed to detect smoke in ventilation ducts and combines a smoke
detector and an adapter system, where both tube and housing are specially designed for
optimum airflow through the smoke detector. The system meets all the requirements
for safe fire detection with airflow speeds from 0.2 m/s to 20 m/s. Since the UG-3 is
used with different types of fire alarm systems and installations it is delivered without:
• Venturi pipe
• Detector
The UG-3 is made for rectangular ducts. The optional UG-MB Mounting bracket has to
be used if the UG-3 should be mounted on insulated or circular ducts. A test hole on
the UG-3 cover makes it easy to test the smoke detector. Simply remove the plastic
plug and spray test gas into the UG-3.
37
Salwico Fire Detection System
Calectro UG-3-O (for DOS3), vent. duct adapter excl. tube and head
5200239-00A
UG-3 has been developed to detect smoke in ventilation ducts and combines a smoke
detector and an adapter system, where both tube and housing are specially designed for
optimum airflow through the smoke detector. The system meets all the requirements
for safe fire detection with airflow speeds from 0.2 m/s to 20 m/s. Since the UG-3 is
used with different types of fire alarm systems and installations it is delivered without:
• Venturi pipe
• Detector
The UG-3 is made for rectangular ducts. The optional UG-MB Mounting bracket has to
be used if the UG-3 should be mounted on insulated or circular ducts. A test hole on
the UG-3 cover makes it easy to test the smoke detector. Simply remove the plastic
plug and spray test gas into the UG-3.
Calectro Pipe
Part no: 5200225-00A Calectro VR-0.6M Pipe, for ducts <600 mm
Part no: 5200226-00A Calectro VR-1.5M Pipe, for ducts <1500 mm
Part no: 5200227-00A Calectro VR-2.8M Pipe, for ducts <2800 mm
5200225-00A
5200226-00A
5200227-00A
Calectro UG-MB Mounting Bracket
Mounting bracket for Uniguard Superflow, UG-3/4 models
• Easily adapted by hand
• Quick assembly
5200229-00A
38
Salwico Gas Detection System
Salwico
Gas
Detection
System
39
Salwico Gas Detection System
Standard Centrals
Salwico GS5000
This Gas detection system is a state-of-the-art addressable detection system designed
to meet marine, industrial and transport requirements. Special care is given to ergonomics and user-friendliness with its logical and intuitive operator panel. These standard
centrals are designed for small stationary gas detection installations for the monitoring
of explosive and/or toxic gases. Salwico Gas Detection System is SOLAS compliant and
certified by all major classification societies for marine applications.
GDS I-1A
GDS I-2A
GDS I-3A
GDS I-1A1R
GDS I-2A1R
GDS I-3A1R
GDS I-1A1C
GDS I-2A1C
GDS I-3A1C
GDS I-1A1C1R
GDS I-2A1C1R
GDS I-3A1C1R
These standard systems are available in the following different variations
1 x Control panel, Internal
1 x Isolated serial interface RS485 (NMEA 0183, MODBUS RTU)
5-15 x Relay outputs (one for fault and one for gas A1, 3-13pcs programmable relays)
4-12 x 4-20mA inputs for connection of gas detectors
0-1 x Serial interface RS485/RS422
0-1 x Serial interface RS232
1 x 2,5A or 4,2A Power supply, 100-240VAC
For detailed information see datasheet.
Note: Custom made centrals is available on request
The Salwico Gas Detection System can also accommondate larger gas detection installations on request such as LNG
vessel, FPSO:s, Drill ships etc. These systems will be tailor made for its application.
Individual modules for custom made centrals
Control M Gas Internal
The Control M Gas is a control panel with a 4.3” graphical colour display used to
manage and supervise a gas alarm system. Control M Gas Internal mounts in the gas
alarm cabinet front. Control M Gas Internal is equipped with communication buses for
connecting to the gas alarm system, but it has to be used in connection with module
BusCon M Gas. Features: • A backlit 4.3” graphical colour display • Alarm buzzer
• LED status indicators • Backbone Bus Interface • MODBUS interface
• USB interface (for service & maintenance) • One power output
• One alarm output • One fault output • Three programmable outputs
5110001-00A
40
Salwico Gas Detection System
Control M X
Control M X is used as a provider of additional communication channels, additional
external communication,
or as an extension bus.
A Control M X provides the following features:
• Ethernet connection
• RS-422/RS-485 interface
• RS-232/RS-485 interface
• Two programmable relay outputs
5100002-01A
Buscon M Gas
The BusCon M Gas is a connection module for the Salwico Gas Detection System. This
module provides electric isolation for the system and backbone extension for module
Control M Gas, as well as monitors the supply voltage and the Xgas signal. The BusCon
M Gas has a 20-pin flat cable connector with extended BBI interface for connection
with a Control M Gas module.
5103002-00A
Analogue M 4-20
The Analogue M 4-20 is a transmitter module for a gas alarm system. This module provides four transmitter interfaces (4-20 mA inputs):
• 2-wire • 3-wire, current source • 3-wire, current sink • 4-wire
In order to avoid a massive start-up current in the system the Analogue M 4-20 module
delays the voltage output (+, SG) in the transmitter interfaces upon start-up:
• Transmitter interface 1, 0 ± 10 ms
• Transmitter interface 2, 125 ± 10 ms
• Transmitter interface 3, 250 ± 10 ms
• Transmitter interface 4, 375 ± 10 ms
5103003-00A
Power Boost M
5103004-00A
The Power Boost M is designed to distribute power and supervise connections in a
gas alarm system. This module can supply: • Centralized power through a Power Boost
Loop, which is secured against interruption and short circuit. • Compensation for voltage drop in the cable for distributed modules in gas alarm systems • Transfer of xGas
status between the Power Boost modules on a Power Boost Loop and the system
modules connected to the Power Boost module on the internal Backbone Bus (BBI)
• External Backbone Bus (BBE) PB-485 communication between system modules. •
Protection of the External Backbone Bus (BBE) PB-485 communication between modules against interruptions and short circuits. • Supervise the 48 VDC and the PbxGas
signals (on the Power Boost Loop). • Transform External Backbone Bus (BBE) PB-485
to Internal Backbone Bus (BBI) RS-485.
41
Salwico Gas Detection System
Surge Prot M
Surge Prot has 3 major functions:
• Surge protected power inputs for the Backbone Bus Internal, BBI.
• Terminal board for Backbone Bus External, BBE (RS485 Repeater).
• Electronic short circuit protected outputs for Control or Repeater panels.
Note! This output is not supervised. These functions can be used together or individually. The module is designed to be used where there are no requirements for electrical
isolation between devices. NOTE! The module has built-in terminators for BBI and BBE.
See section RS485 Termination for more information.
5100420-00A
Bus Isolator M
Bus Isolator M divides the system backbone bus into segments. Its dual functionality
isolates communications and basic backup signals between the stretched system parts
and provides power to the control panel (e.g. Control M Gas).
5100071-01A
Relay M 8
Relay M 8 provides eight programmable relay contacts. Each of these relay contacts provide a potential free change-over contact. Use Relay M 8 to control units such as sirens,
magnets, flashlight, alarms and ventilation fans.
5100081-01A
PSU M ACDC 5A
PSU M AC/DC 5A is a marine approved power supply that powers the system. It is
short-circuiting proof and can be used in pairs to supply 5+5 A or 48VDC.
5100087-01A
42
Salwico Gas Detection System
Control/Repeater Panels
Control M Gas External
The Control M Gas is a control panel with a 4.3” graphical colour display used to manage and supervise a gas alarm system either as a external control or repeater panel.
Control M Gas External can be mounted on any flat surface or flush mounted, independently from a gas alarm cabinet. Control M Gas External is equipped with communication buses for connecting to the system via BBE interface RS-485 or BBE interface
PB-485. Features: • A backlit 4.3” graphical colour display • Alarm buzzer
• LED status indicators • Backbone Bus Interface RS-485 • Backbone Bus Interface
PB-485 (Power Boost loop) • USB interface (for service & maintenance) • Two configurable inputs • Three programmable outputs
5103001-00A
Log Printer
Serial Printer Epson LX300+II
Because of its compact dimensions, the Epson LX-300+II are the ideal 9-pin printer for
applications where space is limited and also a low cost solution for measurement and
control systems. With auto switching USB, serial and parallel interfaces the LX-300+II
provide flexible standalone connectivity.
5200306-00A
Power Boost Loop units & Gas Detectors
Sensor Interface Cabinets
The Sensor Interface Cabinet is an interface unit for 1 to 8pcs of gas detectors. It is
intended for use with Salwico Gas Detection System and can interface with gas detectors with a 4-20mA transmitter interface. The Salwico SIC is connected to the power
boost loop and will accommodate up to eight analogue inputs for gas detectors at the
local area instead of the main central. The advantage with this is that the cables will be
monitored for breaks and short circuits, it will also save lots of installation costs due to
shorter cables. The unit continuously monitors the gas detector for gas alarms, faults and
also checks the supply voltage of the detector interface.
SIC-1A
The Sensor Interface Cabinets are available in the following variants.
Sensor Interface Cabinet with 4 analogue inputs for detectors
SIC-2A
Sensor Interface Cabinet with 8 analogue inputs for detectors
SIC-1A1R
Sensor Interface Cabinet with 4 analogue inputs for detectors and 8 programmable dry
relay contacts
SIC-1A1C
Sensor Interface Cabinet with 4 analogue inputs for detectors and 1 RS485 serial interface
SIC-1C
Sensor Interface Cabinet with 1 RS485 serial interface
SIC-1R
Sensor Interface Cabinet with 8 programmable dry relay contacts
SIC-2R
Sensor Interface Cabinet with 16 programmable dry relay contacts
For detailed information see datasheet.
43
Salwico Gas Detection System
Gas Detecors
SALWICO GD
The Salwico GD range of gas detectors is used to monitor areas where flammable, oxygen deficiency and toxic gases may pose a hazard environment. The Salwico GD uses a
number of sensor technologies including catalytic bead, electrochemical cell and Nondispersed (NDIR). Salwico GD has a long list of user friendly features:
• One hand operation for sensor replacement
• Clear multi-function backlit display
• Tri-colour backlight display for status indication
• 4-20 mA signal output
• 3 Switch relays
• Modbus
• EX-d approved
5200260-01A
The Salwico GD range gas detectors are available in the following variants.
Salwico GD CAT HC 0-100%LEL HYDROCARBON, CATALYTIC, ALUMINIUM ALLOY, M20 ENTRY
5200260-02A
Salwico GD NDIR CH4 0-100%LEL METHANE, NDIR, ALUMINIUM ALLOY; M20
ENTRY
5200260-03A
Salwico GD NDIR C3H8 0-100%LEL PROPANE, NDIR, ALUMINIUM ALLOY, M20
ENTRY
5200260-04A
Salwico GD NDIR CO2 0-2%VOL CARBON DIOXIDE, NDIR, ALUMINIUM ALLOY,
M20 ENTRY
5200261-01A
Salwico GD EC O2 0-25%VOL OXYGEN, ELECTRO CHEMICAL, ALUMINIUM ALLOY, M20 ENTRY
5200262-01A
Salwico GD EC H2S 0-50 PPM HYDROGEN SULPHIDE, ELECTRO CHEMICAL, ALUMINIUM ALLOY
5200262-02A
Salwico GD EC CO 0-250 PPM CARBON MONOXIDE, ELECTRO CHEMICAL, ALUMINIUM ALLOY
5200262-03A
Salwico GD EC H2 0-1000 PPM HYDROGEN, ELECTRO CHEMICAL, ALUMINIUM
ALLOY
SALWICO GD WH TRUE IR
The Salwico GD TRUE IR gas detector is a point detector for gas concentration monitoring potentially hazardous environment. The Salwico GD TRUE IR is based on infrared
absorption. Solid state design improves reliability, long-term stability and accuracy in
continuous measurement of gas concentrations in ambient air. Compared with catalytic
sensors the Salwico GD TRUE IR has the following advantages:
• Proven high reliability and long term stability results in low test frequency and no
calibration cost. • Automatic self-test • Failure will not give gas alarm • Presence of
oxygen is not required during equipment life time • Immunity to poisoning from H2S,
silicone and other agents • No saturation effects from high gas concentrations • The
gas flow rate has no influence on accuracy • Several different mounting possibilities
Special junction boxes or duct mounting brackets are available upon request.
5200138-00A
5200138-01A
44
The Salwico true IR hart gas detectors are available in the following variants.
Salwico GD WH TRUE IR C3H8
Salwico GD WH TRUE IR CH4
Salwico Gas Detection System
Gas Detectors suitable for harch environments
SALWICO GD in 316 stainless steel inclosure
5201095-00A
The Salwico GD range of gas detectors is used to monitor areas where flammable, oxygen deficiency and toxic gases may pose a hazard environment. The Salwico GD uses a
number of sensor technologies including catalytic bead, electrochemical cell and Nondispersed (NDIR). Salwico GD has a long list of user friendly features:
• One hand operation for sensor replacement
• Clear multi-function backlit display
• Tri-colour backlight display for status indication
• 4-20 mA signal output
• 3 Switch relays
• Modbus
• EX-d approved
The Salwico GD range gas detectors are available in the following variants.
Salwico GD CAT HC SS 0-100%LEL HYDROCARBON, CATALYTIC, 316 STAINLESS
STEEL, M20 ENTRY
5201098-00A
Salwico GD NDIR CO2 SS 0-2%VOL CARBON DIOXIDE, NDIR, 316 STAINLESS
STEEL, M20 ENTRY
5201099-00A
Salwico GD EC O2 SS 0-25%VOL OXYGEN, ELECTRO CHEMICAL, 316 STAINLESS
STEEL, M20 ENTRY
5201100-00A
Salwico GD EC H2S SS 0-50 PPM HYDROGEN SULPHIDE, ELECTRO CHEMICAL,
316 STAINLESS STEEL, M20 ENTRY
5201101-00A
Salwico GD EC CO SS 0-250 PPM CARBON MONOXIDE, ELECTRO CHEMICAL,
316 STAINLESS STEEL, M20 ENTRY
5201102-00A
Salwico GD EC H2 SS 0-1000 PPM HYDROGEN, ELECTRO CHEMICAL, 316
STAINLESS STEEL, M20 ENTRY
45
Salwico Gas Detection System
SALWICO GD SS HART
The Salwico GD SS HART range of gas detectors is used to monitor areas where flammable, oxygen deficiency and toxic gases may pose a hazard environment. The Salwico
GD SS HART uses a number of sensor technologies including catalytic bead and electrochemical cell. The stainless steel enclosure makes it suitable for harsh environments.
Salwico GD SS HART has a long list of user friendly features:
• One hand operation for sensor replacement
• Clear multi-function backlit display
• 4-20 mA signal output
• 3 Switch relays
• HART
5201089-00A
The Salwico GD range gas detectors are available in the following variants.
Salwico GD CAT HC SS W HART 0-100%LEL HYDROCARBON, CATALYTIC, SS,
M20 ENTRY, HART
5201090-00A
Salwico GD EC O2 SS W HART 0-25%VOLOXYGEN, ELECTRO CHEMICAL, SS, M20
ENTRY,HART
5201091-00A
Salwico SAL GD EC H2S SS W HART 0-50 PPM HYDROGEN SULPHIDE, EC, SS,
M20 ENTRY, HART
5201092-00A
Salwico GD EC CO SS W HART 0-250 PPM CARBON MONOXIDE, EC, SS, M20
ENTRY, HART
5201093-00A
Salwico GD EC H2 SS W HART 0-1000 PPM HYDROGEN, EC, SS, M20 ENTRY,
HART
SALWICO GDTRUE IR HART
The Salwico GD TRUE IR gas detector is a point detector for gas concentration monitoring potentially hazardous environment. The Salwico GD TRUE IR is based on infrared
absorption. Solid state design improves reliability, long-term stability and accuracy in
continuous measurement of gas concentrations in ambient air. Compared with catalytic
sensors the Salwico GD TRUE IR has the following advantages:• Proven high reliability
and long term stability esults in low test frequency and no calibration
cost • Automatic self test • Failure will not give gas alarm • Presence of oxygen is not
required during equipment life time • Immunity to poisoning from H2S, silicone and
other agents • No saturation effects from high gas concentrations • The gas flow rate
has no influence on accuracy • Several different mounting possibilities
Special junction boxes or duct mounting brackets are available upon request.
46
5201087-00A
The Salwico true IR hart gas detectors are available in the following variants.
Salwico GD WH TRUE IR C3H8 W HART
5201088-00A
Salwico GD WH TRUE IR CH4 W HART
Salwico Gas Detection System
Open path gas detectors
5201054-00A
SALWICO GD OPEN PATH HC, gas detector complete unit,
range 4-20 m.
The Salwico GD Open Path gas detector is a point detector for gas concentration
monitoring in potentially hazardous environments. The Salwico GD Open Path is based
on infrared absorption. Solid state design improves reliability, long-term
stability and accuracy in continuous measurement of gas concentrations in ambient air.
Why open path gas detection? Open path detectors complement the use of individual
point detectors and offer many significant benefits including: • Wider area coverage
- most likely to pick up any leak • Very high speed of response • NO unrevealed
failure modes - no possibility of blocked gas path to detector • Detector location not
as critical • Indicates size of hazard
Moore types of gas detectors are available on request
Duct Mounting kits
Duct mounting kit for SALWICO GD 5200260-262, 100mm in diameter
5200260-01A
Circular type of Duct mounting kit for the following gas detectors:
SALWICO GD CAT HC, Catalytic gas detector, Hydro Carbon gases (HC), 0-100% LEL
5200260-02A
SALWICO GD NDIR CH4, Non Dispersive gas detector, Methane gases (CH4),
0-100% LEL
5200260-03A
SALWICO GD NDIR C3H8, Non Dispersive gas detector, Propane gases (C3H8),
0-100% LEL
5200260-04A
SALWICO GD NDIR C02, Non Dispersive gas detector, Carbon Dioxide gases (CO2),
0-2% VOL
SALWICO GD EC O2, Electrochemical gas detector, Oxygen (O2), 0-25% VOL
5200261-01A
5200262-02A
SALWICO GS EC CO, Electrochemical gas detector, Carbon Monoxide (CO)
0-250ppm
SALWICO GD EC H2, Electrochemical gas detector, Hydrogen (H2) 0-1000ppm
5200262-03A
Duct Mounting kit for SALWICO GD 5200138, Square type
Square type of Duct mounting kit for the following gas detectors:
SALWICO GD WH TRUE IR C3H8, True Infra-red gas detector, Propane 0-100% LEL
SALWICO GD WH TRUE IR CH4, True Infra-red gas detector, Methane 0-100% LEL
5200138-00A
5200260-02A
47
Salwico Gas Detection System
Duct Mounting kit for SALWICO GD 5200138, For JIS5K-200A
Circular type of Duct mounting kit for JIS5K-220A ducts, supports the following gas
detectors:
SALWICO GD WH TRUE IR C3H8, True Infra-red gas detector, Propane 0-100% LEL
SALWICO GD WH TRUE IR CH4, True Infra-red gas detector, Methane 0-100% LEL
5200138-00A
5200260-02A
Accessories for Gas Detectors
Standard Junction box for SALWICO GD WH TRUE IR
(5200138-00A & 5200138-01A), Exd
Standard junction box for the Salwico GD True IR type of detectors (5200138-00A &
5200138-01A)
5200139-00A
5200202-00A
5200203-00A
Salwico GD WH TRUE IR Junction box
Handheld Interrrogator TRUE IR
Duct Mounting Kit TRUE IR
DVC100 (i) Termination Junction box unit, Exd, with connection for Handheld interrogator
Special junction box for very demanding application where easy maintenance is
essential.
5200259-00A
Alarm Devices
NS-ES, electronic siren, 24VDC, IP54, red.
The NS-ES is a Roshni LP sounder that can be connected to all Salwico safety systems.
It has a range of 32 tones which is set by a DIP switch. It is also equipped with a volume
control. The NS-ES is pre-set to tone no. 14 (970 Hz, 105 dBA (+/- 2 dBA) at 1 m). A
second tone is available, which can be switched in by the connection of a third core to
the siren. Volume control switch The switch will provide two settings, either full output
or an attenuation of 10dB.
N1535
48
Salwico Gas Detection System
NS-ES, electronic siren, 24VDC, IP66, red.
The NS-ES/IP66 is a low profile Banshee MT siren for all Salwico Safety systems for
installation in harsh enviroments (IP66). The siren is delivered with cable glands for
cable diameters raging from 8 to 13mm. The base has two knockout holes for the cable
glands. A sounder selector for user selectable tones and a volume control is fitted inside
the sounder.
N1525
Siren, Ex-proof, EExd, 24 VDC
DB3V is a lightweight, flameproof sounder intended for use in potentially explosive
atmospheres. DB3 has been designed with high ingress protection to withstand harsh
environmental conditions. The flame paths, flare and body are manufactured completely
from UV stable glass reinforced polyester. Stainless steel screws and sinter are incorporated thus ensuring a corrosion free product. DB3V has a pre-programmed bell-tone
and integral volume control. DB3V is delivered without cable glands. DB3 fulfils the following requirements: • Eexde IIC T5 • ATEX, Ex II 2GD • BASEEFA certified. DB3V
is also available in GOST “R” & “K”, Chinese (CQST), Australian (SAA) and UL models.
6255
Typhoons
The pneumatic alarm typhoons in the KTV and MKTV series are a maintenance free,
light, rigid and powerful signalling apparatus for different applications on-board
ships. The typhoons can be delivered as a complete unit or the horn and the solenoid
valve as separate units (see separate datasheet). For distinct signals, the piping
length between the valve and the horn should not exceed 6m. The horn is delivered
with wall bracket and filter. For explosive, corrosive or very hot areas the solenoid
valves shall be mounted separately outside the exposed area. The solenoid valve is delivered with filter and fittings for copper piping with Ø 10 mm OD. The solenoid valve
should not be placed outdoor without protective cover.
6303
6304
6311
KTV-75/400 typhoon 24 VDC, 400Hz
KTV-75/400 typhoon 230 VAC, 400Hz
MKT-75/400 Typhoon without mag.valv. 400Hz
49
Salwico Gas Detection System
TV88 Magnet valve 220VAC
Soleniod valve for 6311 MKT-75/400 Typhoon without mag. Valv. 400Hz
6318
Non return valve
Soleniod valve for 6311 MKT-75/400 Typhoon without mag. Valv. 400Hz
6330
SUE-9412A-1, flash light, 230VAC, Eexd IIBT4
The SUE9412A-1 is a series of EX classified flash lights designed for use in very harsh
environments, for example pump rooms on vessels. SUE9412A-1 is available in the following models:
Art.no Power supply Colour on lens
6543
6545
6547
6548
6549
230VAC Blue
230VAC Red
230VAC Yellow
115VAC Yellow
Part no: 6549 230VAC Orange
Horn w. Red Rot. Light 230V Exd IIC T6
Electric horn with red rotating light for harsh environments, Exd IIC T6
5200117-00A
50
Salwico Gas Detection System
Portable Gas Detectors
Portable Gas Detectors
The Dräger X-am 2500 is one of a new generation of gas detectors which have
been specially designed for personal monitoring use. The 1- to 4-gas detector
reliably measures combustible gases and vapours, as well as O2, CO and H2S. Its
ergonomic design, mobile phone dimensions and low weight make it the perfect
companion in your daily work. Reliable measurement technology, long sensor life
and easy operation guarantee maximum safety at extremely low cost of ownership.
5100455-00A
X-AM2500-HC,LEL
5100452-00A
X-AM2500-HC,LEL-O2
5100453-00A
X-AM2500-HC,LEL-H2S
5100453-00A
X-AM2500-HC,LEL-O2-H2S
5100454-00A
X-AM2500-HC,LEL-O2-CO-H2S
X-AM2000/5000-External pump module for Portable Gas Detectors
Pump module X-AM2000/5000 portable gas detectors.
4584
X-AM2000/5000 Chargeable batteries
Chargeable batteries for portable gas detectors of the type A-AM2000/5000 series
4586
51
Salwico Gas Detection System
X-AM5000-HC VOL%
X-am 7000 is the innovative solution for the simultaneous and continuous detection
of up to five gases. A combination of more than 25 sensors allows flexible solutions to
individual monitoring tasks. The Dräger X-am 7000 can be equipped with three electrochemical, and two catalytic bead, infrared or photoionization sensors. It is the ideal
companion in a great number of applications where reliable monitoring of Oxygen,
toxic and combustibles gases and vapors in the ambient air is necessary.
4594
X-AM7000-HC Multigas Detector (HC, O2, H2S) w. Pump and IR sensor
for inert area
X-am 7000 is the innovative solution for the simultaneous and continuous detection
of up to five gases. A combination of more than 25 sensors allows flexible solutions to
individual monitoring tasks. The Dräger X-am 7000 can be equipped with three electrochemical, and two catalytic bead, infrared or photoionisation sensors. It is the ideal
companion in a great number of applications where reliable monitoring of Oxygen,
toxic and combustibles gases and vapours in the ambient air is necessary.
5200049-00A
Viton hose
Viton hose (price per meter)
4220
Calibration Parts
CALIBRATION KIT, REG+FH
Calibration kit for all Salwico Gas Detectors. Parts included in the kit is:
1 x Regulator for the gas bottle
2m of tubing for connection between gas bottle and detector
1 x Flow house for ST-type detectors
5201013-00A
52
Salwico Gas Detection System
Calibration Gas Bottles
Sawico GDS Gas Bottles
Sawico GDS standard disposable calibration gas bottles. Should together with 520101300A when calibrating any of the Salwico Gas Detectors.
5201000-10A
The Salwico GDS gas bottles are available in the following variants.
Propane Calibration Gas Bottle, C3H8 50%LEL (0,85%) 112 Litre at 70 Bar
5201010-10A
Propane/H2S Calibration Gas Bottle, C3H8 50%LEL (0,85%)+ H2S 20ppm+ Nitrogen
5201004-00A
CO Calibration Gas Bottle, CO+oxygen 200 ppm
5201003-00A
CO2 Calibration Gas Bottle, CO2+oxygen 5000 ppm
5201001-10A
Methane Calibration Gas Bottle, CH4 50% LEL (2,2%) 112 Litre at 70 Bar
5201001-20A
Methane Calibration Gas Bottle, CH4 100% Vol 112 Litre at 70 Bar
5201005-00A
H2S Calibration Gas Bottle, H2S 20ppm 112 Litre at 70 Bar
5201006-00A
N2 Calibration Gas Bottle, N2 100% Vol.
Moore calibration gas bottleas with different mixtures are avalible on request
53
Salwico Gas Detection System
Salwico Gas Sampling System SW2020
SW2020
Salwico SW2020 is the safe choice.
Consilium Marine has over the years gained great experience of gas detection in marine
environments with thousands of systems installed in merchant and military vessels. The
SW2020-type is a well-proven scanning sampling gas alarm system intended for detection of gas in ballast tanks and void spaces. It has become the natural choice for discerning ship owners, for retrofits as well as new buildings. The system combines extremely
reliable gas detection yet with a fast response to alarm conditions.
Salwico SW2020 offers versatility
With its flexible design the SW2020 system offers a high level of freedom of choice
with up to 4 different gas detectors of various types and a maximum of 64 sampling
points, furthermore possible to add a continuous measuring CO2-detector for monitoring of the CO2-room. Due to the systems design it offers a cost-effective way of
combining high-quality detectors and multiple sampling points in ballast tanks and void
spaces. It is also possible to divide sampling points into groups for simplified activation of
for instance stand-by mode for sampling points in ballast tanks when ballasting.
Salwico SW2020 provides safety
As part of the safety-thinking involved when designing the system it comes with internal
leakage and shut-off control as a standard feature. The system offers the possibility of
including a counter-pressure function to avoid clogging the pipes backed up by a purging
function. It can also incorporate a water trap as an option if so needed to minimize the
risk of condensation in the pipes. The hardware is developed with our well-proven fire
alarms as a basis why we can guarantee a high level of system security and as a result
an absolute minimum of maintenance requirements. The Salwico SW2020 system has
undergone environmental and working tests according to various norms and has been
approved by major classification societies and authorities worldwide. Due to the stateof-the-art technology it also offers the possibility of integration to Salwico SMS Management system, printers, VDR and other modern safety equipment.
Conclusion:
• Reliable
• 1 to 4 detectors
• Pump redundancy, equipped with two pumps
Suitable locations:
• Water ballast tanks
• Isolation spaces on LNG vessels
54
• Flexible
• 1 to 64 sampling points
• Fast total sampling time
• Non accessible areas
Salwico Monitoring System
Salwico
Monitoring
System
55
Salwico Monitoring System
Salwico Emission Monitoring System
M1040/SeaNox Analyser 220 VAC
The Salwico NOx analyser is a well-proven chemiluminescent Compact NOx Analyser with an integrated dilution that fully complies to “Marpol Annex IV NOx Technical Code”. The Salwico NOx analyser is specially designed for operation in continuous
emissions monitoring application with clean gas system and process control of DeNOx
system. The analyser is a complete, fully integrated monitoring system, configured and
tested according to the requirements for each application.
Easy menu drive operation, easy service and maintenance as well as a variety of built-in
self checks and alarm features assures for a secure and reliable analyser.
550011
M1040/SeaNox Analyser 115 VAC
The Salwico NOx analyser is a well-proven chemiluminescent Compact NOx Analyser with an integrated dilution that fully complies to “Marpol Annex IV NOx Technical Code”. The Salwico NOx analyser is specially designed for operation in continuous
emissions monitoring application with clean gas system and process control of DeNOx
system. The analyser is a complete, fully integrated monitoring system, configured and
tested according to the requirements for each application.
Easy menu drive operation, easy service and maintenance as well as a variety of built-in
self checks and alarm features assures for a secure and reliable analyser.
550015
M1050/SeaSox SO2 Analyser 220 VAC
The Salwico SO2 Analyser is a well-proven UV fluorescent Compact SO2 Analyser with
a integrated dilution that fully complies to “Marpol Annex IV NOx Technical Code”.
The Salwico SO2 Analyser is specially designed for operation in continuous emissions
monitoring application and for process control of scrubbers or equivalent systems. The
analyser is a complete, fully integrated monitoring system, configured and tested according to the requirements for each application.
Easy menu drive operation, easy service and maintenance as well as a variety of built-in
self checks and alarm features assures for a secure and reliable analyser.
550040
M1050/SeaSox SO2 Analyser 115 VAC
The Salwico SO2 Analyser is a well-proven UV fluorescent Compact SO2 Analyser with
a integrated dilution that fully complies to “Marpol Annex IV NOx Technical Code”.
The Salwico SO2 Analyser is specially designed for operation in continuous emissions
monitoring application and for process control of scrubbers or equivalent systems. The
analyser is a complete, fully integrated monitoring system, configured and tested according to the requirements for each application.
Easy menu drive operation, easy service and maintenance as well as a variety of built-in
self checks and alarm features assures for a secure and reliable analyser.
550045
56
Salwico Monitoring System
Guardian CO2 Analyser
The Salwico CO2 analyser provide continuous monitoring and control of gas concentration levels. It feature comprehensive output, alarm and fault indications via the
on-board microcontroller. Based on dual wavelength non-dispersive infra-red (NDIR)
technology, high performance operation with low maintenance requirements. The
operation of the CO2 analyser is described in terms of the outputs (display, LED indicators, analogue output, alarm and fault relays), inputs (gas sensor, flow sensor, fault detection system) and the controls (setpoint controls, setpoint buttons, test button and the
options bitswitch).
550370
OM10 Zirconia O2 sensor
The Oxygen Probe Model OM10 is based on an in-situ-monitoring of the oxygen concentration in the flow gas without sampling. The OM10 probe is a simple and compact
low price probe well suited for non demanding use with exhaust gas temperatures up
to 600 °C. As well as under the condition that the flow gas is neither wet, nor contains
too much tar, dust or airborne particles. The OM10 probe zirconium oxide sensor gives
a precision of 0.1 % with 2 % oxygen concentration in the exhaust gas. The maintenance
need is low due to the fact that the OM10 has no moving parts and that the zirconium
oxide cell has a long lifetime and is easy to replace.
550030
Stack unit (required if distance to probe is longer then 10m)
Electrical connections are established with the help of an AMP-connector. If a V/I transmitter is desired, the AMP-connector is kept in a watertight and chock
absorbing container. (For OM10 Zirconia sensor, 550030)
550160
DL256 STD Logger 1 x DM016 & 2 x IM001
The Salwico DL256 data logger system is designed for modern data acquisition
applications. The system can handle both analogue and digital input and output signals
as well as serial communication with monitors and sensors. The hardware is based on
modules and is therefore easy to upgrade by adding modules.
550060
57
Salwico Monitoring System
IM001 for ambient humidity, ambient pressure, engine interface
(rpm / kW and load) 4-20mA
The IM 001 isolated analogue input module accepts analogue voltage or current input.
The module can also drive passive sensors with no additional power supplies. The operation mode of the module can be Voltage, Current or Current Active mode.
Voltage mode - In this operation mode the unit measure the voltage passively. Current
mode - This operation mode measure current with an external power supply.
Current Active mode - In this operation mode the measuring point do not have it’s
own power supply so therefore the active mode will supply the measuring point with
the necessary power.
550080
TM001 for ambient temperature
Isolated input module for a Pt100 type temperature sensor.
550070
Consilium probe switching unit (Measuring point 1-10)
For systems with more than 1 monitoring point we provide a Multiswitching unit (MSU)
The MSU consists of a PLC and temperature regulators and solenoids for sampling and
purging. The MSU will monitor on each point for 10 minutes.
Sample umbilical line per m
Umbilical Sampling Line (USL) consists of 1 power cable, 1 signal cable and 5 PTFE
tubings for sample, purge, dilution and 2 spares. The USL is prepared for connection at
probe side from Consilium for easy connection.
550140
58
Salwico Monitoring System
DP79100 dilution probe (one for each measuring point)
The Salwico DP7900 is a dilution probe to be used together with Salwico NOx and
SO2 compact gas analyser system. The DP7900 is with its uniformly heated dilution
block - particularly well suited for use in connection with wet scrubbers and other
applications where the stack gas is wet or has a temperature below acid and/or water
dewpoint. Accuracy of measurement is superior compared to other systems due to the
fact that no component of the sample will disappear as a result of condensation. The
dilution probe is easy mounted for easy dismantling for filter checks and replacement
The Salwico DP7900 can be used in high temperature enviroments up to 1800°C.
550170
Mounting flange for DP7900 probes (DIN100/ANSI 4” 150Ib)
Mounting Flange for DP7900 DN50 PN10 Stainless Steel flange with a 25mm Swagelok
connector to fit the guide tube.
550380
Probeflange gasket
Probeflange gasket for 550380 DN50 PN10
550382
HX110 Humidity and Temp sensor (ambient)
The HX110 is a sensor for recording the ambient air humidity and the ambient air
temperature. The range is 0-100% humidity and -20 to +80°C temperature. Gives a
4-20mA signal.
550110
59
Salwico Monitoring System
BM100 Pressure sensor (ambient)
The BM 100 sensor is used for recording the ambient air pressure. The range is 0.7 - 1.1
bar and it gives a 4-20mA signal.
550120
ComVisioner Full Version (required for g/Kw-h)
Presentation SW for the Salwico EMS. Ability to do custom made reports. Necessarry
to use to be able to calculate g/kWh.
550090
Spare part kit for SeaNox
Packing for vacuum pump Filter Media for fan, SK3170 Discharge plate for Ozone generator O-ring for Ozone generator Zero Air Scrubber.
550200
Spare part kit for SeaSox
Membrane set for Dual Chamber pump Filter media for Fan , SK3170 Zero Air Scrubber.
550220
60
Salwico Monitoring System
Pump dual chamber
A dual chamber pump for Salwico EMS.
550260
Spare part kit for DP7900 probe
Spare part kit for DP7900 probe
550180
Spare part kit for Salwico (SeaNox/SeaSox) 1 year
Membrane set for Dual Chamber pump Filter media for Fan , SK3170 Zero Air Scrubber.
550230
Spare part kit for Guardian CO2
Filter membrane.
550652
61
Salwico Monitoring System
Filterset for dilution probe
Filter set for cartridge, a complete setup of filters, O-rings and brackets to replace filters
in DP7900.
550647-00A
SALWICO G1000 Smoke Density Monitoring System
Salwico G1000 Smoke Density Monitor 230VAC
The G1000 is a particular robust system well suited to resist heat and vibrations in and
around smoke stacks. The patented
technology do not locate the light source inside the smoke stack, instead, the infrared
LED is placed in the monitor cabinet and the light beam brought to the smoke stack via
robust optic fibres. The lenses of the optic heads are kept clean with purge air. Quite
evidently, this method reduces maintenance and need of spare parts to a bare minimum. This invention was the first to make use of this design, sincerely appreciated by
our customers.
6731003-00A
Salwico G1000 Smoke Density Monitor 110VAC
The G1000 is a particular robust system well suited to resist heat and vibrations in and
around smoke stacks. The patented technology do not locate the light source inside
the smoke stack, instead, the infrared LED is placed in the monitor cabinet and the light
beam brought to the smoke stack via robust optic fibres. The lenses of the optic heads
are kept clean with purge air. Quite evidently, this method reduces maintenance and
need of spare parts to a bare minimum. This invention was the first to make use of this
design, sincerely appreciated by our customers.
6731004-00A
Salwico G1000 Smoke Density Monitor 24VDC
The G1000 is a particular robust system well suited to resist heat and vibrations in and
around smoke stacks. The patented technology do not locate the light source inside
the smoke stack, instead, the infrared LED is placed in the monitor cabinet and the light
beam brought to the smoke stack via robust optic fibres. The lenses of the optic heads
are kept clean with purge air. Quite evidently, this method reduces maintenance and
need of spare parts to a bare minimum. This invention was the first to make use of this
design, sincerely appreciated by our customers.
6731005-00A
62
Salwico Monitoring System
Optical Fibers 6.0m
Fiber optic cable L=6.0 m – T<240°C
6731011-00A
Optical Fibers 7.5m
Fiber optic cable L=7.5 m – T<240°C
6731014-00A
Air Supply Filter Reg. w coupling
Air filter and regulator for instrument air.
6731021-00A
Flow meter Purge Air flow
Flow meter Purge Air flow for regulation of purge air protection of lens.
6731022-00A
63
Salwico Monitoring System
Remote Digital Display 5714D SDM 4-20mA
Remote digital display.
6731023-00A
Audit Pen 30%
Audit Pen 30% Opacity for calibration.
6700059-00A
Welding & Adjust. Bracket
Welding & Adjustment Bracket (set of two brackets with screws).
6731019-00A
SALWICO G2000 Ambient Oil Mist Detection System
Salwico G2000 Ambient Oil Mist Detector 230VAC
6732003-00A
64
The G2000 Ambient Oil Mist Detector is developed for monitoring pump rooms,
engine- and motor rooms and attached onto boilers or diesel engines. The perils of
oil mist and the potential impacts thereof, is clearly stated by IMO and OCIMF’s “Ship
Inspection Report (SIRE) Programme”. Thus, early alarms on the formation of oil mist
are utterly important. A minor investment yields great benefits, not the least appreciated by vetting inspectors. The G2000 is ideal for applications where an instantaneous
and accurate response to oil mist, but also smoke or steam, is required in unattended
machinery spaces. The G2000 is a Line-Of-Sight opacity meter; aka; “Beam-” or “Open
Path-“ Detector” The Line-Of-Sight principle has the decisive advantage of covering a
larger area than single-point extractive- sampling systems.
Salwico Monitoring System
Salwico G2000 Ambient Oil Mist Detector 110VAC
6732004-00A
The G2000 Ambient Oil Mist Detector is developed for monitoring pump rooms,
engine- and motor rooms and attached onto boilers or diesel engines. The perils of
oil mist and the potential impacts thereof, is clearly stated by IMO and OCIMF’s “Ship
Inspection Report (SIRE) Programme”. Thus, early alarms on the formation of oil mist
are utterly important. A minor investment yields great benefits, not the least appreciated by vetting inspectors. The G2000 is ideal for applications where an instantaneous
and accurate response to oil mist, but also smoke or steam, is required in unattended
machinery spaces. The G2000 is a Line-Of-Sight opacity meter; aka; “Beam-” or “Open
Path-“ Detector” The Line-Of-Sight principle has the decisive advantage of covering a
larger area than single-point extractive- sampling systems.
Salwico G2000 Ambient Oil Mist Detector 24VDC
6732005-00A
The G2000 Ambient Oil Mist Detector is developed for monitoring pump rooms,
engine- and motor rooms and attached onto boilers or diesel engines. The perils of
oil mist and the potential impacts thereof, is clearly stated by IMO and OCIMF’s “Ship
Inspection Report (SIRE) Programme”. Thus, early alarms on the formation of oil mist
are utterly important. A minor investment yields great benefits, not the least appreciated by vetting inspectors. The G2000 is ideal for applications where an instantaneous
and accurate response to oil mist, but also smoke or steam, is required in unattended
machinery spaces. The G2000 is a Line-Of-Sight opacity meter; aka; “Beam-” or “Open
Path-“ Detector” The Line-Of-Sight principle has the decisive advantage of covering a
larger area than single-point extractive- sampling systems.
Manual G2000 AOMD
Manual G2000 AOMD.
6701140-00A
Optical Fibers 2x6.0m
Fiber optic cable L=6.0 m – T<240°C.
6732011-00A
65
Salwico Monitoring System
Optical Fibers 1x4.5m & 1x6.0m
Fiber optic cable L=4.5 m – T<240°C Fiber optic cable L=6.0 m - T<240°C.
6732013-00A
Optical Fibers 2x7.5m
Fiber optic cable L=7.5 m – T<240°C.
6732014-00A
Remote Digital Display 5714D AOMD 4-20mA
Remote digital display.
6732023-00A
Alarm Annunciator G2000 24VDC 8 Channels
The Alarm Monitor M4200 provides the possibility of monitoring 8 individual
processes. All inputs will accept any combination of NO or NC contacts. It is possible to
program each input, e.g. to activate the siren relay, the two alarm relays or
the four open collector outputs. The delays for the inputs can be selected between
25 milliseconds and 60 seconds. When alarm input is activated, the LED goes flashing,
alarm relay 1 and the siren relay goes ON. When reset button is activated, the LED
goes steady and the siren goes OFF together with alarm 1. When alarm input is deactivated, LED goes OFF.
6732022-00A
66
You find us worldwide
Stockholm
Gothenburg
Oslo
Rotterdam
Zeebrugge
Helsinki
Newcastle
Glasgow
Rochester
Hamburg
Pusan
Dammam
Houston
Long Beach
New York
Ft Lauderdale
Barcelona
Bilbao
Piraeus
Doha
Dalian
Mumbai
Qingdao
Vishakhapatnam
Naples
Florence
Genua
Cochin
Tokyo
Shanghai
Hong Kong
Hanoi
Ho Chi Minh
Abu Dhabi
Dubai
Oman
Singapore
B001.1406.8
Consilium Offices
Sales & Service Representatives
www.consilium.se
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement