6 V=+125. H=+180. HAFO002624_RE_new.ap/4/11/14 4:35 PM/

6 V=+125. H=+180. HAFO002624_RE_new.ap/4/11/14 4:35 PM/
V=+125.
H=+180.
Adjustable headrest to grow with your child
Enhanced padding for a comfortable journey
Retractable cup holders
Made to make your life simple
and your child’s life safe
*Age shown is a guide only.
Item Code: 102651, 102669, 102685
All Pampero seats are crash tested to the
highest standards for your child's safety.
UK & IRL: Halfords Ltd, B98 ODE.
HAF0002624_RE_new.ap/4/11/14 4:35 PM/ Magenta/ Black/
ampero
WHIPPER SNAPPER
15-36KGS
4 YRS TO
12 YRS*
pampero
WHIPPER SNAPPER
Contents
Safety Advice
Product Information
Vehicle Application
Assembling the seat
Notice
Removing and Cleaning Cover
Page
o e a 5 N
10
Safety Advice
For the safety of your child, please take the time to read through this
instruction manual carefully, ensuring that anyone else using this
Pampero Car Seat reads them carefully too.
YOUR CHILDS SAFETY DEPENDS ON YOU.
Never leave your child unattended in the car seat. Never install the car
seat in the front seat or the seat with the air bag. According to statistics,
children are safer when properly restrained in rear vehicle seating
locations, rather than front seating locations.
* Ensure plastic parts and rigid items of the child seat are located and
installed so they are not liable to be trapped by a moveable seat or a
door of the vehicle.
* Do not continue to use the child seat if parts have become damaged
or have loosened after an accident.
* Never make unauthorised alterations or additions to the product.
› Itis recommended not to leave children in your child seat when
unattended.
* tis recommended that any luggage or other objects liable to cause
injuries in the event of a collision shall be properly secured.
* Never use the child car seat without cover. Only covers approved by
manufacturers can be used.
» Please do not use a damaged or incomplete car seat. Do not use this
car seat second hand as you do not know the history.
» Please check the car seat belt for the tightness and safeness before
using the car seat. Seat belt is not allowed to be gripped, it should be
taut.
» Please read this manual carefully, otherwise, incorrect installation can
cause injury. In this case, manufacturers are not responsible.
This car seat is suitable for conventional use in all cars equipped
with 3 point seat belts that are fitted in accordance with European
standard (ECE-16 or equivalent standard). Only fastening by leg belt
is not allowed.
Seats and seat belts can be washed with warm water and soap. The
removed seat cover can be washed with mild detergent and warm
water.
Never use the child car seat if it has been in an accident, or if it has
become badly worn.
Child car seat parts may become hot in direct sunlight. Cover with a
sheet to prevent this.
Make sure that your child never plays with the buckle as the buckle is
not fully tamperproof.
Ensure that all other passengers, luggage and loose objects are
properly secured.
In an emergency your child can be released quickly by pressing the
red button on the seat belt buckle.
Store this child car seat in a safe place when it is not being used.
Avoid placing heavy objects on it.
It's very important to put any lap belt low down so that the pelvis is
firmly stressed.
Do not use this product second hand as you never know its history.
Product Information
* Group 2 - suitable from approx 15kg (aprox 3 years) to 25kg
(aprox 7 years)
* Group 3 - suitable from approx 22kg (aprox 6 years) to 36kg
(aprox 12 years)
« [Easy to fix in the car using the 3 point seat belt
» Padded cushion for more comfort
» Covers are removable for washing
Vehicle Application
ANC
Lap and
This car seat is suitable
for conventional use in all
cars equipped with 3 point
seat belts that are fitted in
accordance with European
standard (ECE - 16 or
equivalent standard)
Important:
The child seat must only
be installed using a lap and
diagonal seat belt.
Warning:
Under no circumstances,
should any car seat be used
on front passenger seat with
an active air bag.
Only suitable with 3 point seat belts
Assembling the seat
Assembling the seat
Notice
This is a ‘Universal’ child restraint system. Which is approved to
regulation No.44, 04 revision for general use in vehicles, and it will fit
most, but not all car seats.
A correct fit is likely if the vehicle manufacturer has declared in the
vehicle handbook that the vehicle is capable of accepting a ‘Universal’
under more stringent conditions than those which applied to earlier
designs which do not carry this notice.
If in doubt, consult either the child restraint manufacturer or the retailer.
22KG:- THE CHILD CAR SAFETY SEAT MUST
BE INSTALLED AS A GROUP 2 SEAT.
This uses the car's 3-point adult seat belt to
secure both the child car seat and the child.
IF YOUR CHILD'S WEIGHT IS BETWEEN 15 & / 77 A
Position your child on the seat, pull the 3-point
adult seat belt across in front of the child and
secure the buckle.
Ensure that the lap part of the seat belt is
resting flat across their lap and that it is routed
underneath the two belt guide ‘horns’ (marked with red arrows) on either
side of the booster cushion.
The diagonal part of the seat belt must also be routed under the belt
guide ‘horn’ on the side of the booster cushion nearest the seat belt
buckle. The upper part of the diagonal seat belt must be routed through
the upper belt guide (marked with a red arrow) on the appropriate side of
the headrest.
< Caution — ensure that the side of the seat does not press on or interfere
with the buckle of the 3-point seat belt.
Notice
ONCE YOUR CHILD HAS OUTGROWN THE HEIGHT AND WIDTH
CAPACITY OF THE BACKREST AND THEIR WEIGHT IS BETWEEN 22
& 36KG:- THE CHILD CAR SAFETY SEAT CAN BE INSTALLED AS A
GROUP 3 SEAT.
This version consists of only the booster cushion part of the child car
safety seat and uses the car’s 3-point adult seat belt to secure both
the booster cushion and the child.
For Group 3 the backrest must be removed from the booster cushion.
Stand the seat on a flat surface and push the backrest downwards -
pictured below.
The ‘hooks’ at the bottom of the backrest can then be simply lifted out of
the sockets on the rear of the booster cushion.
FITTING USING THE ADULT 3-POINT SEAT BELT
Place the booster cushion on the car seat and position the child on the
cushion. Pull the 3-point adult seat belt across in front of the child and
secure the buckle.
Ensure that the lap part of the seat belt is resting flat across their lap and
that it is routed underneath the two belt guide ‘horns’ (marked with red
arrows) on either side of the booster cushion.
The diagonal part of the seat belt must
not be routed under the belt guide ‘horn’.
Caution — ensure that the side of the
seat does not press on or interfere with
the buckle of the 3-point seat belt.
Cleaning Cover
The cover and plastic parts should be sponged clean with a mild
detergent and warm water.
Do not use chemical cleaners or bleach on any part of the car seat.
If the fabric cover is very dirty, the covers have elasticated edges and
these can be removed from the headrest, backrest and booster cushion
for hand washing (maximum temperature 300°C, do not tumble dry).
Dry thoroughly before refitting the covers and do not ever use the seat
without the fabric covers fitted.
Cover fabric 100% polyester.
Gol K À 8
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement