2014 Specials Summer

2014 Specials Summer
Summer
2014 Specials
Distribution
Phoenix, AZ location
20 locations - AZ, TX, NM, CO, NV
Gasket Manufacturing
Vendor Managed Inventory
Tool Repair
Custom Kitting & Packaging
M18 FUEL™
1/2" Hammer Drill/Driver
M12™ Sub Compact
Cordless Band Saw
$19999
M12 and M18
Trade-In not valid online, In Store Only
M12™ 3/8" Drill/Driver Kit
22PTL-240722 The powerful
M12 cordless lithium-ion 3/8
in. drill/driver delivers 0-400/01,500 RPM and 275 in.-lbs.
of torque - up to 25% more
torque than the competition.
M12™ Fuel Hammer Drill
$18999
22PTL-240422
This lightweight, versatile hammer drill/driver provides up to 10X
longer motor life, 2X more power
and 4X more runtime. POWERSTATE™ Brushless Motor.
$10599
M12 Trade-in $35.00 off • Offer valid 6/1 through 7/31
M12™ Hackzall Kit
$15999
22PTL-242022
A powerful motor delivers 0-3,000 strokes
per minute and a 1/2” stroke length allows
for fast cutting through a wide range of
material such as drywall, wood, and PVC.
22PTL-242921XC
The most compact and lightest
weight cordless band saw on the
market. The powerful saw can cut
through 3/4" EMT in only 3 seconds, and will deliver 150 cuts per
charge,Variable speed trigger, 27"
Blade size, 280 SFPM, LED light.
(excludes item # 240722) in store only
M12™ Fuel Impact Driver
M12™ Fuel 2pc Combo
22PTL-245322 Hex Impact Driver
offers fastening speed comparable
to 18-volt impact drivers, and 1200
in-lbs of torque. The built-in LED
light illuminates work surfaces in
dark work spots.
22PTL-259722
1/2 in. Hammer Drill Driver
& Impact Driver Combo
Kit. POWERSTATE
Brushless Motor technology and REDLINK tool
intelligence system.
$16499
M18™ 1/2”
4-Tool Combo Kit
HOT
BUY
$10499
$28999
$42999
22PTL-269624
1/2” Hammer Drill-Driver delivers
0-450/0-1,700 RPM, 29,000 BPM and 550 in-lbs
torque. Sawzall® generates 0-3,200 SPM with a
1” stroke. 1/4” Hex Impact Driver delivers 1,400
in-lbs of torque. Worklight with 135° rotating
head. Includes (2) XC High Capacity REDLITHIUM™ batteries, charger, Sawzall® blade
and contractor bag.
Free Battery (48-11-1840)
2
M18™ 5-3/8" Metal
Saw Kit
don't forget
recip blades
22PTL-268222 Exclusive 4-Pole Frameless
Motor for up to 35% more cutting power and
best in class run-time with over 200 cuts of
3/4" EMT per charge.
$34999
Free Battery
(48-11-1840)
22PTL-260522 Delivers 1.8 ft-lbs of impact energy,
0-1,400 RPM and 0-4,800 BPM. AVS Anti Vibration
System delivers minimizing vibration. Rotary hammer,
hammer only and rotation only.
22PTL-265322 The M18
FUEL 1/4" Hex Impact Driver
offers up to 55% faster application speed, and a range of 200
in-lbs to 1600 in-lbs of torque. Its
compact size and weight allow
access to tighter areas and
reduce user fatigue. The
built-in LED light illuminates
work surfaces in dark locations. The kit includes the new multivoltage charger, so you can charge all
M12 and M18 lithium-ion batteries with
one charger.
$29999
22PTL-265522 Most powerful 1/2"
compact impact wrench in its class and
offers the best power to
size ratio among like
competitors. Featuring a Milwaukee® built
4-Pole frameless motor and
optimized impact mechanism,
this impact driver delivers
up to 2,450 RPM, 3,350
IPM and 183 ft-lbs of
fastening torque.
M18 Fuel™ $100.00 Trade-in (June Only) plus FREE Battery (48-11-1840) (June & July) in store only
M18 Fuel™ Reciprocating
Sawzall Kit
22PTL-272021
It delivers the
fastest
cutting speed in
its class, as it boasts 30% faster
cutting than competing saws. Equipped
with a POWERSTATE™ brushless motor,
it supplies constant power for faster cuts and
reduced heat for extended tool life.
M18 FUEL™ Band Saw Kit
$47999
M18™ 7/8” SDS
Plus Rotary Hammer
$44999
Free Battery
(48-11-1840)
$29999
$29999
Sawzall® Recip Saw Kit
22PTL-650931 Powerful 12 amp motor
delivers 0-3,000 SPM with a 3/4” stroke length for high perfomance cutting.
Quik-lok™ blade clamp for fast, tool-free blade changes. Carrying case included.
22PTL-260422 With
up to 725 in-lbs of
torque. Most powerful drill
in its class. Powerstate™
brushless motor provides
unmatched power and
sustained torque to complete
the toughest of applications.
The Redlithium™ batteries
provide 50% more run-time
than the competition. Redlink
Plus™ electronics provide
total system communication
with overload protection.
We are an Authorized
Milwaukee Service Center
M18 Fuel 1/2" Impact
Wrench
$32999
M18 FUEL™ Impact
Driver Kit
M18 FUEL™ Hammer
Drill & Impact Kit
$39999
22PTL-279722
Powerstate™ brushless motor delivers up
to 725 in-lbs of torque, 31,450 BPM plus
0-550 and 1-1,850 RPM. M18 FUEL™ 1/4"
Hex Impact Driver with Powerstate™ brushless motor delivers 1,600 in-lbs of torque
and 0-2,900 RPM. Drive control offers
three fastening modes for precision work.
Includes (2) Red Lithium batteries, charger
and case
M18 Fuel™ 4 Tool
Combo Kit
$63999
22PTL-279624 Includes 1/2" Hammer Drill/
Driver (2604-20), 1/4" Hex Impact Driver
(2653-20), SAWZALL® Reciprocating Saw
(2720-20), LED Work Light (2735-20).
POWERSTATE™ Brushless Motor, REDLINK
PLUS™ Electronic Intelligence and REDLITHIUM™ Battery Technology, this results
in longer motor life, more run time and more
power. Kit includes 2 4.0 battery packs, charger, contractor bag & recip blade.
M18 FUEL™ 4 1/2"-5"
M18 FUEL™ 1/2"
Paddle Switch Grinder Impact Wrench Kit
SPECIAL ORDER (2729-21)
Get the power of a corded saw with the convenience of a cordless one when you use the M18™
FUEL Deep Cut Band Saw Kit with Battery (272921). Powered by a brushless motor, it is impressively durable with a cutting capacity of 5" x 5". It
features an armored frame with crush zone barriers
for long-lasting use and protection. Plus, it also has
a handy built-in tool hanger for easy storage.
ARIZONA
800.603.6887
TEXAS
915.595.3111
$29999
22PTL-278021 4-1/2"/5" Grinder, Paddle
Switch. POWERSTATE™ Brushless Motor,
it delivers maximum power and up to 10
times longer motor life. It boasts corded
performance, but is conveniently portable
and easy to operate with its cordless body.
COLORADO
303.799.1804
22PTL-276222 with Pin
Detent Kit delivering up to
600 ft-lbs of maximum
fastening torque, up to
2X more runtime and up to
3X longer motor life. Offers
superior socket retention with
a 1/2" pin detent anvil.
$41999
NEW MEXICO
505.797.3100
NEVADA
702.597.5309
3
Great
Deals
1/4" diameter,
1" and 2" length,
phillips bits,
square bits, torx
bits, magnetic nut
drivers, magnetic
bit holder.
$1299
11 in 1 Multi-Tip Screwdriver
$1299
22PXL-48222113 Featuring the
Milwaukee® ECX™ bits and hardened tips. includes the 9 bits and
nut drivers most frequenting used.
The integrated gut hook and wire
stripper also increase utility.
6 in 1 Combination Pliers
$1700
35-Pc Drilling &
Driver Bit Set
22PTM-W8115
8.0 amp motor generates
10,000 RPM. Switch with
lock-on. 2-position handle.
Spindle lock.
4
$15499
22PTK-HR2475X2
Includes 1” SDS Plus Rotary Hammer (HR2475)
and Grinder (GA4530) - 4-1/12”, 6.0 amp, 11,000
RPM.
$29999
22PTK-LXT218
Includes 1/2” 2-speed hammer drill/driver (1900
RPM, side handle) and VS Impact.
22PTM-W11125Q
9.6 amp motor generates
10,000 RPM. Switch with
lock-on. 2-position handle.
Spindle lock. Quick Change.
22PTK-HR4010C
Powerful 11.0
amp motor delivers 235-480 RPM,
1,350-2,750 BPM. LED Service
light. AntiVibration Technology for
maximum comfort with minimal vibration. 2-modes of operation; hammer
only and hammer with rotation.
$15399
5”/6” Angle
Grinder
22PTM-WE14150Q 12.2 amp
motor generates 9,000 RPM.
Switch with lock-on. 2-position handle. Spindle lock. Quick Change.
$17799
7" Polisher/Sander
$20599
22PTK-LXPH03 LXT Lithium-Ion. Delivers 750
in-lbs of torque. 33% more than previous model.
0-400, 0-2,000 RPM .
1/2" Impact Tool
$30729
ARIZONA
800.603.6887
780 ft-lb (1054 Nm) still at only
3.95 lb. The new design includes
enhanced controls for the even
greater comfort and convenience.
Feather-touch trigger, wider range
of power regulator settings in
forward, always maximum power
in reverse, patented one-hand
forward/reverse control.
TEXAS
5" Air Angle Grinder
The 345MAX is a perfect choice
for high performance material
removal. This 5" air angle grinder
combines a unique internal governor with a
poweful 0.88 hp motor, to give you a best-inclass power to weight ratio grinder that will
maximize your rate of material removed. 12,000 RPM.
22PTI-2135QTIMAX
915.595.3111
22PTK-9227CX3 Variable speed (0 - 3,000
RPM) with pre-set maximum speed dial - ideal
for ultra slow polishing. Fast and powerful
polishing for clearcoat finishes.
We are now a distributor!
22PTI-345MAX
* Ingersoll Rand not in stock at all locations
22PTM-W24180
$19799
22PTK-9564CV
12.0 amp , 2,800-10,500 RPM. Super Joint
System technology helps prevent gear damage.
Variable speed control dial.
18V Hammer DriverDrill Kit
$62999
7” Large Paddle Grinder
15 amp motor generates 8,500
RPM. Metabo VibraTech Vibration
reduction. Dust Protector.
22PTK-9557PBX1
7.5 amp, 10,000 RPM. Includes 5 wheels,
diamond blade, and case.
$28999
1-9/16” AVT SDS Max
6” Paddle Switch Grinder
22PTM-WEP14150Q
12.0 amp motor generates
9,000 RPM. Non-locking
paddle switch. Quick
Change.
$21199
5” Angle Grinder
$19799
4-1/2” Angle Grinder
$7499
18V LXT 2 Pc Combo
$2400
$9999
We are an Authorized Makita Service Center
4-1/2” Paddle Grinder
22PXL-48324402
Includes bits for heavy
duty impact applications as well as a
variety of drilling and
fastening needs.
$3000
4-1/2” Angle Grinder
HOT
BUY
29-Piece Shockwave
Driver Bit Set 22PXL-48324401
Fastback™ Utility Knife
22PXL-48221901 Designed to
activate the blade 3X faster than a
2-handed opening, the Fastback™
Utility Knife features a one handed
blade opening for easy activation.
Includes knife and 5 utility blades
22PXL-48223069 Introducing the
new 6 in 1 Combination Pliers.
Features a revolutionary dual
head design for wire stripping and
needle nose functionality. Uniquely
designed with a reaming head to
smooth out touch edges of metal.
1” Pitbull SDS Plus &
Grinder
$24479
Standard Duty Air
Hammer
22PTI-116
$4599
The economical air hammer for fast cutting action, especially
for medium exhaust system, panel cutting, and general repair
work. Up to 3,500 blows per minute. Alloyed steel barrel and
heat-trated piston for longer life. Built-in power regulator and
trigger control.
COLORADO
303.799.1804
NEW MEXICO
505.797.3100
NEVADA
702.597.5309
5
We are an Authorized Bosch Service Center
Tek Screwgun
2,500 RPM
1”, 1-1/8" Reciprocating Saws
22PTB-RS325 1" 12.0 amps of
power at only 7lbs, 0-2,800 SPM.
Constant Orbit. Ultra compact size.
Fast cutting in all types of material.
22PTB-RS7 1-1/8" 11.0 amps of power.
0-2,700 SPM. Variable speed trigger
which improves cutting
control in various materials.
$12399
$9999
3-Point Self-Level 5-Point Electric
Alignment Laser Alignment Laser
22PTB-GPL3
Plumb and level
point projection.
Self-levels,
senses and indicates out-of level
condition, locks
when switched
off. Up to ± 1/4”
at 100 ft.
$18999
$9999
22PTB-GPL5
Plumb, level and
square point projection. Self-levels,
senses and indicates out-of level
condition, locks when switched off.
Up to ± 1/4” at 100 ft.
Hex Demolition
Hammer
22PTB-BH2770VCD
Bosch 1-1/8" Hex Demolition
Hammer Brute Turbo Breaker W/
Steel & Cart. 120V 1-1/8" Hex
Brute Turbo Deluxe Hammer
Kit. Its best-in-class impact
energy of 47 ft.-lbs. provides
maximum concrete removal for
maximum productivity. It also
has an anti-slip rubber cover
to help prevent the tool from
accidentally falling over. Plus, it
has shock-absorbing handles to
further reduce vibration for more
comfortable operation.
$174999
We are an Authorized Bosch Service Center
6
Drywall
Screwgun
4,500 RPM
22PTB-SG450
7.0 amp, no load 4,500 RPM. 106 in. lbs
per torque. Compact ergonomic design.
Strong bit tip magnet maximizes control
when driving long screws. Variable
speed trigger. Lock-on button. Belt Clip
$11499
22PTB-SG250
7.0 amp, no load 2,500 RPM.
177 in. lbs per torque.
Compact ergonomic design.
High torque gearbox for driving
screws into hard woods and materials. Variable speed trigger. Lock-on
button. Belt Clip
$12199
1-9/16" SDS-Max® Combo Hammer
Free
Drill
22PTB-11240 10 amp; 0-400
RPM; 0-3,000 BPM. Combination mode, 2 modes of operation,
rotary hammer and hammer only
mode. Vario-Lock™ positioning
- rotates and locks chisel into 12
different positions.
$39999
90PROMO-DDS18102L
(Compact Tough Drill/Driver) free item while supplies last
1” SDS-Plus®
Bulldog Xtreme
Rotary Hammer
New BRUSHLESS Bosch Cordless Now In Stock!
The new line of Bosch EC
18V EC BRUSHLESS
12V Max EC BRUSHLESS brushless
power tools is one
Compact Tough™ 1/2"
1/4" Hex Drill/Driver
of the finest examples of German engineering. Unparalled
Hammer Drill/Driver Kit
22PTB-PS2202
Variable Two Speed.
20+1 clutch settings,
perfect torque adjustments
for precises screw driving.
0-400/0-1,300 no load RPM.
180 in. lbs torque. 2x tool life,
brushless motor and improved
gearbox and electronics.
22PTB-HDS18201L
18+1 clutch settings,
0-25.500 no load BPM
and 0-500/0-1,700 no load RPM.
442 in. lbs torque. Brushless motor,
up to 2x the motor life, superior
efficency for longer runtime.
18V EC BRUSHLESS
2 Tool Combo Kit
$13599
$27999
12V Max EC BRUSHLESS
3/8" Drill/Driver
18V EC BRUSHLESS
Socket Ready Impact
22PTB-PS3202
Variable Speed. 20+1
clutch settings, perfect
torque adjustments
for precises screw driving.
0-400/0-1,300 no load RPM. 265
in. lbs torque. 2x tool life, brushless
motor and improved gearbox and
electronics.
22PTB-IDH18201L
Socket ready chuck, allin-one impact driver and
impact wrench with a 1/4" quickchange and 1/2" square drive
chuck for sockets. 0-3,200/02,600/0-1,100 no load BPM and
0-2,800/0-2,000/0-1,300 no load
RPM. 0-1,600/0-900/0-400 in
lbs. torque.
$14599
22PTB-CLPK250181L
Includes HDS182 EC Brushless Compact
Tough™ Hammer Drill Driver and IDH182
EC Brushless Socket Ready Impact
Driver. Also includes charger, (2) slim
pack 2.0Ah batteries, l-Boxx 2, (2) exact
fit insert tray, (1) 4X bit tip holder, (1) 4
piece bit tip set, 91) magnetic bit holder,
(1) double ended impact bit, and (2) belt
clips
$35999
$29999
DareDevil™ Spade Bit
Bull Dog Extreme Full Head Hammer
Carbide Bit Longest Lasting Bit in Concrete & Rebar
$18999
performance, durablity and a
no nonsense service plan are
what makes these tools as
tough and dependable as the
people who use them.
Spur &
Reamer
Feed Your Need For Speed
For Cleaner
Holes
Full Cone
Threaded Tip
Centric Conical Tip
22PTB-11255VSR 7.5 amp; 0-1,300 RPM; 0-5,800 BPM. Hammerhook™ allows
quick tool storage during job. Rotation only, rotary hammer and hammer-only mode.
Vario-Lock™ positioning - rotates and locks chisel into 36 different positions.
Fast and Effortless
Drilling
Hex Shank Power Groove
Wear Mark
Reduces Slippage
Full Head Carbide Tip
Alerts user when bit has worn to a level inappropriate
for precision anchoring
Lasts 4x longer than Hilti TE-C3X in rebar.
Faster drilling speed and less carbide wear
Contoured
Paddle
Metal Cutting Recip Saw Blades
Extra Long Life in Metal Cutting Applications
1-1/8” SDS-Plus®
Bulldog Xtreme
Rotary Hammer
4-1/2” Small Angle Grinder
$5999
$22999
22PTB-1380SLIM Powerful 7.5 amp
motor generates 11,000 RPM. Ergonomic
slim grip. Removable brush covers. Lockon Side Switch.
22PTB-RH228VC 360° Auxiliary handle with built-in depth gauge. Dhandle design for extra control. SDS-plus® bit system allowing tool-free
bit changes with automatic bit locking. Variable-speed reversing trigger.
ARIZONA
800.603.6887
TEXAS
915.595.3111
Patented 2x2 Tooth Geometry Increased Body Height and Thickness
for up to 20% faster cutting in metal
for straighter cuts with less vibration
Hole Saws & Quick Change
Super-Fast Cutting Action
COLORADO
303.799.1804
• One Mandrel is all you need
with the Bosch Power Change™
bi-metal hole saw system
NEW MEXICO
505.797.3100
NEVADA
702.597.5309
73
Trade In!
call us for details
Trade in a Functioning
or Broken Non-Dewalt
Power Tool for a Discount
Towards the Purchase of a
New Dewalt Tool!
We are an Authorized DeWalt Service Center
14" Multi-Cutter Saw
$46999
18V Cordless XRP™
Impact Wrench Kit
1/2" Impact Wrench
w/ Detent Pin Anvil
22PTD-DW872
Offers versatility by cutting a wide variety of
materials including ferrous and non-ferrous metals.
Utilizing a carbide tipped blade allows the depth of
cut to remain constant throughout blade life. Cuts 4
times faster than chop saws and 8 times faster than
portable band saws. 1,300 RPM, spindle lock, quick
lock vise, 1" wheel arbor, 5-3/16"round max capacity, 6-1/2" X 4-1/2" max capacity rectangular.
Deep Cut Band Saw
22PTD-DW292
7.5 amps.
345 ft-lbs of
deliverable torque in
forward and reverse.
1/2" detent pin anvil.
AC/DC forward / reverse
rocking switch.
$16999
1/2" VSR Drill
$9999
$31999
22PTD-DWM120K
10 amp, 100-350 fpm (ft/min), multi-position
handle, LED light.
4-1/2” Paddle
Switch Grinder
$8999
22PTD-D28402 10.0 amp motor generates 11,000 RPM. Keyless adjustable
guard. 2-Position side handle.
8
22PTD-DW059K2
300 ft-lbs of max
torque, 1,650 rpm
2,600 ipm for faster application speed. Rocker
switch design for fast and
easy forward and reverse.
$30999
3/8" VSR Drill
$6499
22PTD-DW235G
Helical-cut steel, heat treated steel gears for
long life and durability. Metal gear housing.
Two-finger, rubber trigger. 10 amp, 0-850 RPM,
600W Max watts out.
7" Angle Grinder
$19999
22PTD-DWE4557
8,500 RPM 15 Amp
High power 4.7 HP motor provides overload protection
which provides higher operating speeds (8500 rpm) under
load. DEWALT's Dust Ejection System protects the motor
from damaging particles entering air intake that would
otherwise abrade the motor and increases brush life.
22PTD-D21002
All ball-bearing construction provides durability and longer tool life.
Pistol Grip. 6 amp, 0-2,500 RPM,
480W Max watts out.
1-3/4" SDS Max Combo Hammer
22PTD-D25602K
1-3/4" SDS Max Combo
Hammer with SHOCKS® &
CTC®. 13.5 amp, 210-415
rpm, 1430-2840 bpm. 9.5
ft-lbs. of impact energy
provides fast drilling and
powerful chipping. Complete torque control.
HOT
BUY
18V Cordless 6-Tool
Combo Kit
$59999
$59999
1” D-Hdl SDS Hammer
20V Max* Lithium Ion Brushless
1/4" Impact Driver
$18499
22PTD-D25213K 2.5 ft-lbs of impact energy provides fast
drilling and powerful chipping. 8.0 amp motor delivers
0-1,150 RPM and 0-4,300 BPM. Reverse feature assists
in the removal of fasteners. Variable speed.
1/4" 18V Cordless
XRP™ Impact Driver
22PTD-DCK655X
Includes DCD950
18V XRP™ Cordless Hammer Drill with patented 3-speed all metal transmission and 1/2" metal
ratcheting chuck, DC390 18V Circular Saw with 6-1/2" carbide blade can
cut 2X4's at a 45° angle in a single pass, DC385 18V Cordless Reciprocating Saw with keyless blade clamp allows for quick blade change,
DC285 18V Impact Driver with 1,330 in-lbs of maximum torque, DC411
18V Cut-Off tool with 6,500 rpm, DW919 18V flexible Floodlight.
$24599
22PTD-DC825KA
Frameless motor w/
replaceable brushes
for extended tool durability and life. 1,330 inlbs of torque, 0-2,400
rpm/0-2,700 ipm
for faster application.
22PTD-DCF895D2
Brushless motor, 3 Speed Design. No load
0-2,850/1900/950rpm. 0-3,300/2,400/1,300ipm.
125/75/42 ft-lbs max torque. Three LED lights
around the chuck with 20 second delay after
trigger release. Push button chuck. Compact
design.
$23999
1-1/8” Reciprocating Saw
$9999
22PTD-DW304PK
10.0 amps of power at only 7lbs, 0-2,800 SPM.
4-Position blade clamp allows for flush cutting and
increased versatility.
12V Drill/Driver/Impact
18V 1/2” Drill/Driver
20V Max* Lithium Ion
Compact Combo Kit
DeWalt LCD Heat Gun
22PTD-D26960
The DeWalt D26960
Heat Gun has variable
temperature control which
allows you to adjust the
heat settings depending
on whether you need
low-temperature heating or
full-force heat for the task
at hand.
$19999
$9999
22PTD-DCK211S2 Includes 3/8” Drill/Driver 0-400/1,500) and 1/4” Impact Driver featuring
3 LED lights.
ARIZONA
800.603.6887
TEXAS
$26999
22PTD-DCD940KX
3-Speed all-metal
transmission. 0-500/0-1,250/0-2,000 RPM.
Includes (2) 18V XRP™ batteries, charger,
360° side handle, and Kit box.
915.595.3111
COLORADO
303.799.1804
$29999
22PTD-DCK285C2 Includes
DCD785 - 20V Max* 1/2” Hammer/Drill featuring 2 speed transmission (0-600/02,000) and DCF885 -20V Max* 1/4” Impact Driver
NEW MEXICO
505.797.3100
NEVADA
702.597.5309
9
We Are An Authorized Hitachi Service Center
1-1/2” SDS Max
1-1/2” Spline
$37900
$35900
22PTH-DH38MS 2-modes of operation;
hammer/drill, hammer only. 8.4 amps and 950
watts of input for power.
22PTH-DH38YE2 2-modes of operation; hammer/drill, hammer only. 8.4 amps and 950 watts
of input for power.
$8999
4-1/2” Paddle
Switch Grinder
22PTH-G12SE2
9.5 amp motor generates 10,000 RPM. Toolless wheel guard adjustable to desired angle.
Paddle switch with Lock-on.
1-9/16” SDS Max
$52999
22PTH-DH40MRY UVP technology. 2-modes
of operation; hammer/drill and hammer only.
9.2 amps and 950 watts of input for power.
$10599 3/4” Impact Wrench
5” Angle Grinder
22PTH-G13SC2
11.0 amp motor generates 10,000 RPM.
Trigger Lock-on switch. Removable side handle.
$17999
7” Large
Angle Grinder
22PTH-G18SCY
Powerful 15.0 amp motor generates 6,000
RPM. User Vibration Protection technology that
reduces full load tri-axial vibration by up to 30%.
Magnetic Driver
Bits
22PXH-115007 No. 2
Phillips magnetic driver
bits. Sold per bit. Patented
magnetic collar design.
Manufactured w/ high quality
S2 steel. Black oxide finish.
10
$299
per bit
22PTH-WR22SA
7.5 amp, 1,800 RPM,
2,000 IPM. Forward
reverse rocker switch. Large
heat-resistant bumper to
protect the tool. Includes side
handle and plastic case.
$35999
14" Portable Chop Saw
22PTH-CC14SFS
Hefty 15 Amp (2000W) motor produces a no-load speed of 3,800 RPM
for greater cutting efficiency. Portable,
rugged and lightest in class (36.4 lbs)
to withstand daily transport between
trucks and jobsites. Adjustable fence
is easy to use and miters 45
degrees to the right or left
for versatility
$14499
15/16” SDS Plus
We are an Authorized
Huck Distributor
& Service Center
Lightweight
Mag Drill Press
22PTC-AC50 Powerful and
lightweight magnetic drill
press. 1100 W, 2 speed motor
(300/450 rpm). Cutter Capacity: 2-1/8" diameter X 2" depth.
33lbs Standard external fluid
reservoir. Quick change cutter
arbor. No load speed 600 RPM.
$15999
22PTH-DH24PF3 3-modes of operation; drill
only, hammer/drill, hammer only. 7.0 amps and
800 watts of input for power.
1-1/8” Demo Hammer
Includes: 1 external coolant bottle,
1 chip guard kit, 1 hex key 4mm,
1 hex key 2.5mm, 1 wrench 8mm,
3 handles, 1 safety chain, and 1
plastic carrying case.
Magna-Grip®
Grade 2 fastener that resists
loosening. Widely known as the most reliable wide grip fastening system
there is, the HUCK Magna-Grip fastener also provides vibration resistance and high uniform installed values.
Magna-Lok®
Strong, consistant and reliable. Employing a unique solid circle lock,
the Magna-Lok® fastener creates an internal lock during installation
that virtually eliminates pin pushout.
$77999
22PTH-H65SD2 31 ft-lbs of impact energy. 10.8
amp motor and 1,240 watts of input for power.
1/2” Impact Wrench
22PTH-WR16SA
4.2 amp, 1,900 RPM,
2,100 IPM Includes:
1/2" square to hex adapter, side
handle assembly, extension bar
assembly and plastic case.
$25999
1/2” 6.2 amp
Drill
MiniBrute Mag
Drill Press
22PTC-AC35
1-3/8" - 32MM Capacity
1200W, 23 lbs. Cutter
capacity: 1-3/8" diameter X 2" depth. Quick
change cutter arbor.
C50L®
The rugged C50L fastener is an alternative to Grade 5 bolts. Available in diameters ranging from 1/2" to 1-3/8", a variety of materials
and head styles, the C50L is ideal for applications where consistent,
uniform high clamp force is required.
Includes: external coolant
bottle, safety chain, safety
guard, 3 pinion handles,
body housing handle,
2.5mm hex key, heavy duty
case, manual.
BOM®
The highest strength, highest precision fastening system you'll find
anywhere. The BOM® (Blind, Oversize, Mechanically locked) fasteners
from Alcoa Fastening Systems are so strong, one can do the work of
up to four ordinary fasteners.
C6L®
The classic 6-groove locking fastener built with staying power. Remains the number one fastening system for applications that require
a strong, vibration-resistant seal today. C6L exclusive locking groove
design ensures a permanent fit that resists loosening.
$62999
Carbide Tipped Annular Cutters
CT150 and CT200
Cut holes in cast iron, steel and
ultra hard or exotic alloys. Engineered for tough materials.
Pneudraulic Installation Tool
24HT-2025
$14599
22PTH-D13
Preferred for drilling holes in
metal, wood and various plastics. 3-Position side handle and
2-Position rear D-handle.
$105999
$115000
Nose Piece Not Included
ARIZONA
800.603.6887
Designed for production
volume fastening. Offers a
number of outstanding features, including an ergonomically designed handle, plated
piston rods and efficient in-line
poistion. An extended piston
version (2025L) is available
and an optional vaccuum
assist pintail collection system
(2025V) can be added.
TEXAS
915.595.3111
CT150 - 1-3/8" Depth of Cut, Diameters 9/16"-1-9/16"
CT200 - 2" Depth of Cut, Diameters 9/16"-4"
Twister Drill Set
22INC-TWISTERXL5 29 pc. in surable
plastic case. Includes 1/16" - 1/2" X 64ths
Brute XL5 drills are the ultimate workhorse for drilling tough alloys including
stainless steel. Features a 135 degree split
point, unique web geometry and NOMO
surface treatment for fast penetration rates
and long tool life.
COLORADO
303.799.1804
NEW MEXICO
505.797.3100
$9999
NEVADA
702.597.5309
11
Tool Lanyard
Durability • Versatility • Productivity
Special Order
Compact and durable. Has the
stopping power of a full-sized
unit without the added weight
New
of an external shock-pack.
ComforTech Harness Foreman Harness
31FT-7081SM or
31FT-7081LX
Three D-rings (back
and side). Nineposition, heavy-duty
tongue buckle leg
straps. Waist pad/
positioning assembly.
Two lanyard keepers.
7,300 pound polyester webbing.
$23100
SRL Lanyard
31FT-7227
20' DuraTech SRL
with 3/16" galvanized steel cable.
Tensile strength of
4,000 lbs. Aluminum housing and
drum are durable.
Lightweight.
$56800
Carabiner
$5700
31FT-8447
Large size steel carabiner with 2-14" double
locking gate opening.
12
31FT-7073SM or
31FT-7073LX
Waist Support
Harness with
padded support
and 3-D Rings.
7.5-Inch StayPut
shoulder pads.
4-Inch web waist
support/positioning
assembly and work
belt.
Web SRL
31FT-8262
8' Web SRL. 1-3/4"
seatbelt style webbing. Simple inertial
locking mechanism.
Tensile strength of
5,000 lbs. Includes
1-1/8" carabiner for
anchorage connection
$12500
$16700
$900
31FT-5027G
Wrist Leash with Speed-clip Loop and
adjustable velcro closure, rated for tools
up to 5 lbs.
Tradesman Harness
12 & 14" Diamond Blades
4X4 Multi-Purpose Blade
31FT-7410 Reusable,
Hinged Roof Anchor
with heavy Duty Dring; Includes Nails
$9300
Web Anchor
Roof Anchor
$2600
31FT-7010
3 D-rings (back and
side) with 5 point
adjustability. 9 position, heavy duty
tongue buckle leg
straps. 2 lanyard
keepers. 6,800 lb
heavy duty polyester webbing.
$8300
Steel Anchorage
valid only on one
invoice
$900
31FT-5027B
Heavy-duty; 15 lbs. Tool Capacity; Loop and
Carabiner; Expands from 37" to 43".
Buy $350 in Norton Product, Receive Free Grinder
Buy $1000 Receive 4 Free Grinders
Tool Lanyard
$2800
31FT-7336
3' Pass-Thru anchor sling is constructed using heavy-duty
1-3/4" polyster webbing sewn on to a 3" wear pad. Uses on
standard D-ring connection to deceleration device and one
large D-ring for pass-through/wrap around cinching. Rated
at over 5,000 lbs.
The 4x4 is suited for use in concrete, reinforced concrete, granite, building materials,
thin steel sections, angle iron up to 2-inch
material thickness and rebar up to No.5.
The 4x4 is made with the innovative patentpending steel core design.
34DPSM-1400
$13000
14" X .125 x 1"/20mm Diamond
Premium Segmented Dry/Wet
Multi Purpose Blade.
34DPSM-1200
Free 4-1/2” Paddle Switch Grinder
90PROMO-D28402 10.0 amp motor generates 11,000
RPM. Keyless adjustable guard. 2-Position side handle.
$95 Value
$11000
Free
12" X .125 x 1"/20mm Diamond
Premium Segmented Dry/Wet
Multi Purpose Blade.
Buy $350 in Norton product, receive free grinder, buy $1000, receive 4
BUY 4 OR MORE
CASES OF TEK SCREWS
RECEIVE FREE GUN!
Norton Clipper High-Speed Gas Saw
22PTX-CP514350I
$123900
$20000 Value
Web Restraint Lanyard
31FT-8209
6' Single Leg; with 2 Snap Hooks.
1" Polyester webbing provides
extreme UV resistance. 3,600 lbs
gate strength on all steel connectors.
Polyester label cover protects warning and
inspection labels.
Concrete Anchorage
31FT-7531
Steel Trailing Beam Clamp, Single Ratcheting;
Fits 4" to 12" Flange Width; Machined Aluminum
bar; Steel Jaws with Slider Pads
$3400
$10900
31FT-7440 Reusable 3/4" Multi-directional Temporary Anchor for Use
in Existing Cured Concrete Structures; Rated to 5,000 lbs.
The Norton Clipper CP514350i high-speed gas saw may
be new to the stage but it's
destined to be a star on any
crew. It's fully designed with the
user in mind to not only cut a
smooth fast track, but it's also
fully equipped to handle the
everyday performance of any
jobsite
ARIZONA
800.603.6887
• Patented iLube® automatic
mix means no more pre-mixing
oil and fuel.
• 3-step easy start eliminates
the hassle of a choke.
• Five-point vibration reduction
system for less fatigue.
• Push and pull air cleaning for
longer life.
TEXAS
915.595.3111
Free
COLORADO
303.799.1804
While Supplies Last
1/4" Hex Screwdriver Drill
90PROMO-DW268 Designed for heavy driving/high
torque applications. 2500 RPM 6.5 Amp Electric
NEW MEXICO
505.797.3100
NEVADA
702.597.5309
13
Wedge Bolt +
Snake - Internally Threaded Screw Anchor
Only ICC listed Drop-In anchor approved for use in
cracked concrete.
21BSCZ Availabke
in 1/4", 3/8", 1/2".
Sets flush to
concrete. 3X faster
installation than
standard drop-in
anchor. Free setting
tool with every box.
icc ESR-2272
PURE 110+
Special Order (08310SD)
$1295
1-to-1 high strenth
epoxy that maintains
load strength up to 110
degrees. highest performing adhesive for IBC
2012, ICC-ESR-3298 for
use in cracked and uncracked concrete/ comes
in 10 oz caulking tube or
also avialble in 21.5oz.
PowerFoam™
31EFP-08130N 12 oz. normal expansion polyurethane
foam sealant which
adheres to wood,
metal, masonry
and concrete. Is
dispensed through
a convenient straw
applicator. Ideal for
smaller jobs and
one time use.
Semi-Automatic
Concrete Nailing tool
P3500
Special Order
21WBZ One
piece heavy duty
screw anchor, Category 1 cracked
& uncracked concrete. Grout filled
masonry ductile
anchor.
1-4" X 1-3/4" X 10"
icc esr-2526,
ESR-1678
Smart DI+™ Dropin
Before/Unset
Drill, lock, drive After/Set
22DBCSS
Powers’ Patented Smart DI+™ Dropin reduces
the amount of force needed to set the anchor. With only five hammer blows required,
Smart DI+™ is up to 50% more efficient than
competitive dropin anchors. With the auto-set
tool, Smart DI+™ is even more efficient, with
dramatic savings in labor and time.
$20999 Powerstud + SD1 & SD2
• .22, .25, .27 calibar loads available
• Available in ACQ treatment for pressure threated lumber
Low velocity, semi-automatic .27 caliber tool which can be used
to install .300 head drive pins, 8mm head drive pins and 1/4"-20
threaded studs, up to 3" in total length. Designed for high speed
and repetitive volume applications.
Only Requires Periodic
Special Inspection.
PE1000+
21EPP-0502SD
A two-component
high strength epoxy
for cracked and
uncracked concrete.
2003/2006/2009
IBC IRC, ACI 355.2,
ACI 318 Appendix
D (code compliant).
NSF64 Approval. Fits
in RE500SD tools,
12 min gel time, 4
hour full cure. DOT
approved.
icc esr-2583*
90PROMO-08298
Buy 3 Cases Get
(2) 08298 Guns Free
Trak-It® C5 Cordless
Concrete, Block, Steel,
& Wood Pin Nailer
icc esr-3275
42PTP-55142
C5 has the greatest power output
at 105 joules,
which allows for
shooting into even
the hardest concrete,
able to shoot pins up
to 1-1/2” in length,
and is the only tool in
its class that shoots
.102, .108, .120
and .145 diameter
pins.
icc esr-2818,ESR-2966 (SD1) icc esr-2502 (SD2)
21PS1Z (SD1) Zinc plated carbon steel body & carbon steel expansion clip. Category 1 cracked and uncracked concrete. 2003/2006/2009 IBC, IRC, ACI 355.2,
ACI 318 Appendix D (code compliant), grout filled masonry. The only low cost wedge for all applications to comply with codes. 1/4” through 1-1/4” diameters. Applications: Structural connections, safety related attachments, tension zone applications, cable tray, strut, pipe supports, fire sprinklers, seismic & wind loads
21PS2Z (SD2) Zinc plated carbon steel body & stainless steel expansion clip. Category 1 cracked and uncracked concrete. 2003/2006/2009 IBC, IRC, ACI 355.2,
ACI 318 Appendix D (code compliant), grout filled masonry. 1/4” through 1-1/4” diameters. Applications: Structural connections, utility safety related attachments, tension zone applications, cable tray, strut, pipe supports, fire sprinklers, seismic & wind loads, meduim to heavy duty purposes.
14
The Adhesive Cartridge
Estimator for iPhone®,
iPad® and Android™!
U-Channel Bridging
Connectors Special Order
For Cold-Formed Steel
Construction
SET XP Structural
Anchoring Epoxy
21EPS-SETXP22
Designed and tested for cracked and
uncracked concrete. Anchoring epoxy
formulated and tested AC308 and
2006 IBC requirements.
SET 22 High 21EPS-SET22
Strength Epoxy
22 oz two-component, 1:1
ratio, high solids, epoxy
based adhesive for use as a
high strength, non-shrink anchor grouting material. Resin
and hardener are dispensed
and mixed simultaneously
through the mixing nozzle.
SET meets or exceeds
the requirements of ASTM
C-881 specs for Type I, II,
IV and V, Grade 3, Class B
and C.
icc Es esr-2508
Tested for Cracked &
Uncracked Concrete
Blue Banger Hanger
Ideal for hanging sprinkler and water
pipes, hanging equipment and ductwork,
strut and hangers and seismic bracing.
Gas-Actuated
Concrete Nailer
The ideal solution for attaching light duty
fixtures to concrete and metal deck for
mechanical, electrical and plumbing applica42PTS-GCNMEPKT tions. Power to drive .125" diam. pins. 1,200
shots per fuel cell and 3,300 per battery
charge.
$49999
Automatic Fastening Tool
$35999
42PTS-PTP27L
No sliding barrel, just load and shoot. Adjustable power for fastening
versatility. Fastener length - 180" thru 2-1/2" (3" or 4" washered). No
manual resetting of piston required. Operator comfort.
TEXAS
21BHM
915.595.3111
SET-XP®
Adhesive
21EPS-SETXP10
SET-XP® is a 1:1
two-component, highsolids, epoxy-based
anchoring adhesive
formulated for optimum performance
in both cracked and
uncracked concrete.
ICC-ES AC308 and
2009 IBC requirements.
$20999
42PTS-PT27
Semi-automatic general purpose tool. Reliable design of the world's most
popular tool. Fast cycling. Engineered for continuous use, high reliability and
low maintenance. Key fastening applications are acoustical ceilings, electrical
applications, framing members, drywall track, water proofing material and/or
lathing.
800.603.6887
Compact Geometry - facilitates
efficient installation in industry-standard
1.5" web knockouts.
Web slots - offers strong rotational
resitance without the use of screws.
Embossments - Enhance connector
strength and stiffness.
Dual Installation Options - for maximum
design and application flexibility
Contoured Flanges - fits snug over
industry-standard 1.5" wide u-channels.
The Blue Banger Hanger is an internally threaded insert that is cast into
the underside of concrete decks after being fastened to the top of wood
forms, metal deck, or roof deck before the concrete is poured.
Semi-Automatic Fastening
Tool
ARIZONA
New
COLORADO
303.799.1804
8.5oz Structural
Epoxy-Tie
Strong-Bolt® 2
icc ES esr-3037
IAPMO ES ER-240
ICC Approved for Cracked & Uncracked Concrete
Available in the popular 3/8" diameter, the StrongBolt® 2 is ideal for MEP applications in cracked
Cracked &
Uncracked IBC
2012
CONCRETE
concrete, such as hanging pipes, struts, equipment
anchorage and other fixtures overhead. The anchor
ESR-3037
is also effective for lightweight-concrete applications, including concrete-over-metal decking. The
Strong-Bolt® 2 wedge anchor in type 316 stainless
steel also offers optimum performance in both
cracked and uncracked concrete, meeting 2012 IBC
standards for post-installed anchors. This is ideal
for corrosive environments, including construction
in coastal areas, wastewater and sewage treatment
facilities, food processing facilities, pulp and paper
21SBZ
mills, and other high-exposure environments.
®
ICC-ES
NEW MEXICO
505.797.3100
NEVADA
702.597.5309
15
Distribution Locations
Arizona
Phoenix - Main
3602 N 35th Ave.
Phoenix, AZ 85017
(602) 272-2384
(800) 603-6887
Fax (602) 233-9182
Avondale
824 N 99th Ave.
Suite 103
Avondale, AZ 85323
(623) 936-8551
Fax (623) 936-0277
Flagstaff
1841 E Huntington Dr.
Flagstaff, AZ 86004
(928) 774-3237
(800) 794-2658
Fax (928) 774-3557
Phoenix - Bell
17023 N Black Canyon Hwy
Suite 1
Phoenix, AZ 85023
(602) 548-1873
Fax (602) 548-1975
Peoria
8936 N 79th Ave.
Peoria, AZ 85345
(623) 334-4951
Fax (623) 334-5019
Nogales
1060 N Mariposa Rd.
Nogales, AZ 85621
(520) 281-4986
Fax (520) 281-9567
Phoenix - Broadway
3831 E Broadway Rd.
Phoenix, AZ 85040
(602) 437-8677
Fax (602) 437-9351
Tucson - Main
3162 N Fwy. Industrial Loop
Tucson, AZ 85705
(520) 882-0611
(800) 678-0283
Fax (520) 882-0692
Prescott Valley
8655 E Eastridge Dr.
Prescott Valley, AZ 86314
(928) 772-3177
Fax (928) 772-0353
0692
Tucson - Park
811 E 47th St.
Tucson, AZ 85713
(520) 770-2480
Fax (520) 882-2829
Yuma
2995 S Shari Ave.
Yuma, AZ 85365
(928) 317-8110
Fax (928) 317-8171
Phoenix - Tool Repair
3801 N. 34th Ave
Phoenix, AZ 85017
(602) 352-4815
Fax (602) 278-8643
We’re Not Just A Bolt Company Anymore™
www.copperstate.com
Manufacturing Locations
Manufacturing
3637 N 34th Ave.
Phoenix, AZ 85017
(602) 352-4815
(800) 528-4255
Fax (602) 272-3316
El Paso
11129 Pellicano Dr.
El Paso, TX 79935
(915) 595-3111
Fax (915) 595-2366
Tool Repair
Colorado
Denver - South
13365 James E. Casey Ave.
Englewood, CO 80112
(303) 799-1804
Fax (303) 799-6154
Tool Repair
Tool Repair
Mesa
923 E Impala Ave.
Mesa, AZ 85204
(480) 926-2566
Fax (480) 892-6952
Texas
Gasket Stamping
Phoenix
Denver - South
3622 N 34th Ave.
13365 James E. Casey Ave.
Phoenix, AZ 85017
Englewood, CO 80112
(602) 272-2384
(303) 799-1804
Fax (602) 233-9182
Fax (303) 799-6154
Denver - Stapleton
4880 Geneva St.
Denver, CO 80238
(303) 371-5766
Fax (303) 371-5799
New Mexico
Albuquerque - Main
8401 Washington St. NE
Albuquerque, NM 87113
(505) 797-3100
Fax (505) 822-1600
Tool Repair
Albuquerque - South Valley
2301 2nd St. SW
Albuquerque, NM 87102
(505) 247-2949
Fax (505) 247-0848
Nevada
Las Vegas
5530 S Valley View Blvd.
Suite 106
Las Vegas, NV 89118
(702) 597-5309
Fax (702) 597-9235
Concerning all items in this promotional brochure: Copper State Bolt & Nut Co. is not responsible for Errors or
Omissions. Pictures may not represent advertised items. Products may not be in all stores. Free items and products
are offered while supplies last. This promotional material is valid 6/1/2014 - 7/31/2014
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement