PowerCage™ 1600 - Commercial Integrator

PowerCage™ 1600 - Commercial Integrator
FIBER OPTICS & TWISTED PAIR
PowerCage 1600
™
MODULAR POWER ENCLOSURE
FOR FIBER OPTIC AND TWISTED
PAIR EXTENDERS
AA Accommodates up to 16 single-slot
or eight double-slot multi-function
boards
AA Modular, field-upgradeable, and hotswappable design
AA Intelligent power management
AA Optional redundant, hot-swappable
power supplies for mission-critical
environments
AA Exceptional thermal management
AA Space-saving design with a compact
3U, rack-mountable enclosure
AA PowerCage FOX Fiber Optic
Extenders support standard
definition or high-resolution video,
stereo audio, and RS-232 over a
single fiber
AA PowerCage FOX Fiber Optic
Extenders deliver pixel-for-pixel
image quality at the highest
resolutions
AA PowerCage MTP Twisted Pair
Extenders support standard
definition or high resolution video,
and audio or RS-232 over a single
CAT 5-type cable
The Extron PowerCage 1600 is a compact 16-slot, rack-mountable
enclosure that houses fiber optic and twisted pair A/V transmitter and
receiver boards for extending low or high resolution video, stereo audio,
and RS-232 control signals over moderate to extreme distances. The
PowerCage 1600 is designed for mission-critical environments, featuring
a hot-swappable, modular design with optional redundant power supplies
and active thermal and power management to optimize system reliability.
DESCRIPTION
The Extron PowerCage™ 1600 is a rack-mountable, 16-slot
enclosure that supports a wide range of Extron fiber optic and
twisted pair A/V transmitter and receiver boards. Providing an
efficient way to power and mount multiple transmitters and
receivers, the PowerCage 1600 simplifies integration for large,
rack-mounted systems. The PowerCage 1600 also features an
optional redundant, hot-swappable power supply plus active power
and thermal management to optimize reliability in mission-critical
environments where continuous, 24/7 operation is essential. The
hot-swappable, modular design allows for replacing or upgrading
boards in the field at any time, without having to power down the
system.
Exceptional thermal management provides channeled air flow to
each board for optimal cooling and superior reliability. Air flows
from the side of the unit to each board slot, eliminating the need for
an air gap above or below the enclosure and preserving valuable
rack space. The boards are designed to channel the air out the
rear of the chassis for optimal cooling in each slot. An LED on the
front panel provides a real-time status alert of an over-temperature
condition.
Real-time status indicators on the front panel provide instant
feedback for power status, communication, and alarm for
each of the 16 slots. The front-panel configuration port enables
communication to each board slot for configuration and convenient
setup of PowerCage FOX Fiber Optic Extenders.
PowerCage boards occupy either a single-slot or double-slot space,
depending on the board type and design. Each PowerCage board
features the ability to power down internal components when there
is no active signal present, providing intelligent power management
for increased system efficiency.
Modular Design Provides Maximum Flexibility
Available boards for the PowerCage 1600 include 16 fiber optic
and four twisted pair extenders to support a broad range of video
resolutions and formats. The fiber optic and twisted pair boards
operate independently, and may be mixed and matched within
the enclosure. The PowerCage 1600 can be populated with any
combination of transmitters and/or receivers to meet system needs,
making it an ideal solution for larger systems that need to support
remote sources and destinations. For example, matrix switchers
generally reside in equipment racks, which are typically at some
distance away from both the source equipment and display devices.
In general, a mixture of transmitters and receivers are utilized to
distribute signals to and from these locations, often with the need to
overcome specific challenges such as limited conduit space, as well
as distance limitations.
The ability to accommodate multiple transmitters and receivers
in a single enclosure streamlines system design and installation.
The PowerCage 1600 eliminates the need for managing individual
power supplies and minimizes required rack space when factoring
in additional rack units necessary for heat dissipation and cooling.
The modular design also offers a degree of future-proofing, whereby
unpopulated slots are available to support system growth without
additional rack space, system downtime, or equipment relocation.
Complete Fiber Optic and Twisted Pair Solutions
PowerCage FOX Fiber Optic Extenders and PowerCage MTP
Twisted Pair Extenders are part of the larger, comprehensive
FOX Series and MTP Series of fiber optic and twisted pair products.
They can be used for simple point-to-point applications, or in
combination with other products including switchers, distribution
amplifiers, and matrix switchers, to tackle the most challenging
A/V system designs with numerous inputs and outputs. The
Extron FOX Series and MTP Series provide integrators and system
designers with the most complete fiber optic and twisted pair
product offering in the industry.
PowerCage FOX Fiber Optic Extenders
PowerCage FOX Fiber Optic Extenders include transmitter and
receiver boards for long-haul transmission of A/V signals over a
single fiber. They are available in a broad range of formats and rates,
including high resolution RGB, DVI, multi-rate SDI, SD component
video, S-video, and composite video. Engineered for reliability and
exceptional high resolution image performance, they use Extron's
exclusive all digital technology, to deliver perfect pixel-for-pixel
transmission of video images.
PowerCage FOX Fiber Optic Extenders are a double-slot design,
allowing for up to eight boards within the enclosure. Multiple
receiver boards can be daisy-chained. PowerCage FOX Fiber
Optic Extenders are available for multimode or singlemode fiber.
Multimode fiber is typically used within buildings or facilities with
moderate-range transmission distances. Singlemode fiber offers
long-range transmission capability over extreme distances up to
30 km or 18.75 miles.
The PowerCage FOX fiber optic boards, along with other FOX Series
products provide a broad range of fiber optic products for a
complete A/V distribution system using a fiber optic infrastructure.
PowerCage FOX extenders work seamlessly with other FOX fiber
optic products including transmitters, receivers, switchers, matrix
switchers, and distribution amplifiers.
PowerCage MTP Twisted Pair Extenders
The PowerCage MTP Twisted Pair Extenders include transmitter and
receiver boards for the transmission of A/V signals over a single
CAT 5-type cable. The PowerCage MTP T 15HD RSA can transmit
high resolution video and audio signals up to 1,500 feet (450 meters)
when used with an MTP 1500RL extended distance receiver model,
while the PowerCage MTP R 15HD RSA SEQ receiver can receive
XGA video and mono audio signals at cable lengths of 600 feet
(180 meters) or more. PowerCage MTP Twisted Pair Extenders are
available for high resolution RGB, HD YUV, S-video, and composite
video along with audio or RS-232 signals.
The PowerCage MTP Twisted Pair boards, along with other MTP
Series products provide the widest selection of twisted pair products
for a complete A/V distribution system using a twisted pair cabling
infrastructure. PowerCage MTP extenders work seamlessly with
other MTP Twisted Pair products including transmitters, receivers,
switchers, matrix switchers, and distribution amplifiers.
FEATURES
AA Accommodates up to 16 single-slot or eight double-slot
multi-function boards – The PowerCage 1600 accommodates
a mix of FOX Fiber Optic Boards and MTP Twisted Pair Boards,
providing a convenient rack mount solution for long-haul and
extended transmission of A/V signals.
AA PowerCage FOX Fiber Optic Extenders support standard
definition or high resolution video, stereo audio, and RS-232
over a single fiber – Extend high resolution RGB, DVI-D, multirate SDI, standard resolution component, S-video, or composite
video over extreme distances.
AA Space-saving design with a compact 3U, rack-mountable
enclosure – Streamlines installation and eliminates individual
power supplies for each transmitter and receiver.
AA PowerCage FOX Fiber Optic Extenders deliver pixel-for-pixel
image quality for high resolution video – All digital technology
ensures pixel-perfect images over extreme distances at the
highest resolutions.
AA Modular, field-upgradeable, and hot-swappable design –
Additional transmitter and receiver boards may be added at
any time for quick and easy upgradeability or expansion. Hotswappable components allow the user to replace boards or
power supply at any time without the need to power down the
system. This is especially useful for mission-critical applications
that require continuous system operation.
AA Intelligent power management – Each PowerCage board
features the ability to power down internal components when
there is no active signal present, providing intelligent power
management for increased system efficiency.
AA Optional redundant power supply – Available for continuous,
mission-critical applications where power reliability is crucial.
AA Hot-swappable power supplies – Primary and optional
redundant power supplies provide added reliability for critical
applications.
AA Exceptional thermal management – Provides channeled air
flow to each board for optimal cooling and reliable operation.
AA PowerCage FOX DVI and VGA Fiber Optic Extenders are
compatible with FOX and FOX 500 Series transmitters and
receivers – PowerCage FOXtransmitter and receiver boards
can be mixed and matched with FOX and FOX 500 products for
versatile system designs and configurations, including ultra-long
distance DVI-to-analog RGB and RGB-to-DVI conversion, without
the need for external signal conversion devices. Please refer to the
individual boards for full compatibility information.
AA PowerCage FOX Fiber Optic Extenders provide alarm
notification for fiber link loss – PowerCage FOX Fiber Optic
Extenders can be set up to trigger an external control system for
immediate notification when a fiber link has been lost.
AA PowerCage MTP Twisted Pair Extenders support standard
definition or high resolution video, and audio or RS-232
over a single CAT 5-type cable – Extend high resolution
RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, and
composite video over long distances.
The PowerCage 1600 accommodates a mix of FOX fiber optic boards and MTP twisted pair
boards, providing a convenient rack-mount solution for long-haul and extended transmission
of A/V signals. The hot-swappable design makes system upgrades transparent to the current
system.
PowerCage™ FOX FIBER OPTIC TRANSMITTERS AND RECEIVERS
The Extron PowerCage FOX fiber optic transmitter and receiver boards send A/V signals over extreme distances
with pixel-for-pixel performance.
COMMON FEATURES
n A
ll digital technology provides pixel-for-pixel performance
n M
odular, field-upgradeable, and hot-swappable boards designed for the PowerCage 1600 enclosure
n D
aisy-chain capability
n A
vailable as 850 nm multimode model, for moderate-range transmissions, and 1310 nm singlemode model, for extreme
distances up to 30 km (18.75 miles)
n Industry standard LC connectors provide reliable physical connectivity and precise fiber core alignment
n D
ouble-slot, hot-swappable board design
PowerCage FOX DVI Plus
Fiber Optic Extender for DVI, Audio, and RS-232
UNIQUE FEATURES
• Extends
single link DVI-D, stereo audio, and RS-232 control signals very long distances over a
single fiber
• Pixel-for-pixel performance with signals up to 1920x1200, including HDTV 1080p/60
• EDID emulation
• Second fiber link enables bidirectional RS-232 pass-through, control from either location, and
real-time system monitoring
• Alarm notification for fiber link loss
• Auto Input Memory
• 30 user memory presets
• Audio gain & attenuation adjustment and muting capability
• Internal test patterns for calibration and setup
• Compatible with FOX Series distribution amplifiers, switchers, and matrix switchers.
PowerCage FOX Rx DVI Plus receivers are also compatible with
PowerCage FOX/FOXBOX Series, HDMI, DVI Plus, DVI, VGA, and VGA/YUV transmitters
Model
PowerCage FOX Tx DVI Plus MM
PowerCage FOX Rx DVI Plus MM
PowerCage FOX Tx DVI Plus SM
PowerCage FOX Rx DVI Plus SM
Version Description
Multimode - Transmitter
Multimode - Receiver
Singlemode - Transmitter
Singlemode - Receiver
Part Number
70-873-11
70-873-21
70-873-12
70-873-22
PowerCage
FOX Rx DVI Plus
PowerCage
FOX Tx DVI Plus
PowerCage FOX Tx DVI
Fiber Optic Extender for DVI, Audio, and RS-232
UNIQUE FEATURES
• Extends
single link DVI-D, stereo audio, and RS-232 control signals very long distances over a
single fiber
• Pixel-for-pixel performance with signals up to 1600x1200, including HDTV 1080p/60
• EDID emulation
• Second fiber link enables bidirectional RS-232 pass-through, control from either location,
and real-time system monitoring
• Alarm notification for fiber link loss
• Auto Input Memory
• 30 user memory presets
• Audio gain & attenuation adjustment and muting capability
• Internal test patterns for calibration and setup
• Compatible with PowerCage FOX VGA, FOXBOX Series, HDMI DVI, RGB, and VGA/YUV receivers and
FOX Series distribution amplifiers, switchers, and matrix switchers
Model
PowerCage FOX Tx DVI MM
PowerCage FOX Tx DVI SM
Version Description
Multimode - Transmitter
Singlemode - Transmitter
Part Number
70-700-11
70-700-12
PowerCage
FOX Tx DVI
PowerCage™ FOX FIBER OPTIC TRANSMITTERS AND RECEIVERS
PowerCage FOX VGA
Fiber Optic Extender for VGA, Audio, and RS-232
UNIQUE FEATURES
• E
xtends RGBHV, RGBS, RGsB, or RsGsBs, stereo audio, and RS-232 control signals very long
distances
over a single fiber
• Pixel-for-pixel performance with signals up to 1600x1200
• Second fiber link enables bidirectional RS-232 pass-through, control from either location,
and real-time system monitoring
• Alarm notification for fiber link loss
• Auto Input Memory
• 30 user memory presets
• Audio gain & attenuation adjustment and muting capability
• Internal test patterns for calibration and setup
• Compatible with PowerCage FOX DVI, FOX/FOXBOX Series, HDMI, RGB, VGA/YUV, and DVI transmitters
and receivers, and FOX Series distribution amplifiers, switchers, and matrix switchers
Model
Version Description
Part Number
PowerCage FOX Tx VGA MM PowerCage FOX Rx VGA MM
PowerCage FOX Tx VGA SM
PowerCage FOX Rx VGA SM
Multimode - Transmitter
Multimode - Receiver
Singlemode - Transmitter
Singlemode - Receiver
70-699-11
70-699-21
70-699-12
70-699-22
PowerCage
FOX Tx VGA
PowerCage
FOX Rx VGA
PowerCage FOX 3G HD-SDI
Fiber Optic Extender for Multi-Rate SDI
UNIQUE FEATURES
• E
xtends SDI, HD-SDI, and 3G-SDI signals very long distances over a single fiber
• Passes embedded audio, ancillary ID and metadata information, and SD/HD-SDTI digital video
signals
• Input equalization and reclocking on buffered outputs
• Dual buffered outputs
• Multiple configurable modes of operation:
– T
ransmitter with local monitor outputs
– R
eceiver with fiber loop-through and daisy-chain capability
– B
idirectional transceiver – send and receive from both locations
• Compatible with the FOX 3G HD-SDI, FOX 3G DVC, FOX DA8, and FOX Series switchers and matrix
switchers
Model
PowerCage FOX 3G HD-SDI MM
PowerCage FOX 3G HD-SDI SM
Version Description
Multimode - Transceiver
Singlemode - Transceiver
Part Number
70-701-01
70-701-02
PowerCage
FOX 3G HD-SDI
PowerCage FOX AV
Fiber Optic Extender for Video, Audio, and RS-232
UNIQUE FEATURES
• E
xtends standard definition video, stereo audio, and RS-232 control signals very long distances over
a single fiber
• Auto Input Format Detection
• Picture and audio adjustments
• Internal transcoding with selectable output format
• Second fiber link enables bidirectional RS-232 pass-through, control from either location, and realtime system monitoring
• Audio gain & attenuation adjustment and muting capability
• Alarm notification for fiber link loss
• Compatible with the FOX AV, FOX DA8, and FOX Series switchers and matrix switchers
Model
PowerCage FOX Tx AV MM
PowerCage FOX Rx AV MM
PowerCage FOX Tx AV SM
PowerCage FOX Rx AV SM
Version Description
Multimode - Transmitter
Multimode - Receiver
Singlemode - Transmitter
Singlemode - Receiver
Part Number
70-702-11
70-702-21
70-702-12
70-702-22
PowerCage
FOX Tx AV
PowerCage
FOX Rx AV
PowerCage™ MTP TRANSMITTERS AND RECEIVERS
The Extron PowerCage MTP transmitters and receivers extend high resolution RGB, HDTV, and standard definition video, plus audio or
RS-232 signals long distances over a single CAT 5-type twisted pair cable.
COMMON FEATURES
n M
odular, field-upgradeable, and hot-swappable boards designed for the PowerCage 1600 enclosure
n C
ompatible with all MTP Twisted Pair products including transmitters, receivers, switchers, matrix switchers, and distribution amplifiers
n L
ED power indicator
PowerCage MTP 15HD RSA
MTP Twisted Pair Extender for VGA and Audio or RS-232
UNIQUE FEATURES - MTP T 15HD RSA
• Transmits high resolution video up to 1,500 feet (450 meters) with MTP extended distance
receiver models
• Receives high resolution video 600 feet (180 meters) or more - PowerCage MTP R 15HD RSA SEQ
• EDID emulation - PowerCage MTP T 15HD RSA
• Switchable video output pre-peaking circuit for optimizing video signal on long cable runs
• Compatible with high resolution video up to 1920x1200, including HDTV
UNIQUE FEATURES - MTP R 15HD RSA SEQ
• Variable level and peaking controls
• Independent skew compensation adjustments for each color
Model
PowerCage MTP T 15HD RSA
PowerCage MTP R 15HD RSA SEQ Version Description
Transmitter
Receiver w/Skew Equalizer
Part Number
70-817-01
70-818-01
PowerCage
MTP T 15HD RSA
PowerCage
MTP R 15HD RSA SEQ
PowerCage MTP AV
MTP Twisted Pair Extender for Composite or S-Video and Audio
UNIQUE FEATURES
• Transmit and receive A/V signals 1,000 feet (300 meters) or more over a single
CAT 5-type cable
• Transmit summed mono or stereo audio
• Transmits composite or S-video to an MTP receiver - PowerCage MTP T AV
• Receives composite video or S-video from an MTP transmitter - PowerCage MTP R AV
• Gain and sharpness adjustments for optimizing image quality over long cable runs PowerCage MTP R AV
Model
PowerCage MTP T AV
PowerCage MTP R AV
Version Description
Transmitter Receiver
Part Number
70-815-01
70-816-01
PowerCage
MTP T AV
PowerCage
MTP R AV
SPECIFICATIONS
NOTE: The optional PowerCage FOX boards are class 1 laser products. They meet the safety regulations
of IEC-60825, FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11.
OPTICAL SPECIFICATIONS
PowerCage FOX boards, interconnection between transmitter and receiver
Number/type1 singlemode or 1 multimode fiber optic input and
output per FOX board, up to 8 double space boards per
PowerCage enclosure
Operating distance
Singlemode30 km (18.75 miles) with singlemode (SM) cables with a
SM board
Multimode300 m (985') with 62.5 µm multimode (MM) cable and a
MM board
1 km (3280') with 50 µm multimode (MM) cable and a
MM board
2 km (6561') with 50 µm 2000 MHz bandwidth laser
optimized MM cable and a MM board
Nominal peak wavelength850 nm for multimode (MM), 1310 nm for singlemode
(SM)
Transmission power,
singlemode or multimode-5 dBm, typical
Maximum receiver sensitivity
Singlemode-18 dBm, typical
Multimode-12 dBm, typical
Optical loss budget
Singlemode13 dB, maximum
Multimode7 dB, maximum
Maximum channel data rate
PowerCage FOX AV boards2.125 Gbps
Other PowerCage FOX boards4.25 Gbps
VIDEO — POWERCAGE FOX TX/RX AV
Standards
InputNTSC 3.58, NTSC 4.43, PAL, SECAM, autodetected
OutputNTSC 3.58, PAL (follows vertical rate)
VIDEO OUTPUT — POWERCAGE FOX RX AV
Video delay1-2 frames
VIDEO INPUT — POWERCAGE MTP T 15HD RSA
Number/signal type1 analog RGBHV, RGBS, RGsB, RsGsBs, component video
(YUVi or YUVp/HDTV), S-video, or composite video
VIDEO OUTPUT — POWERCAGE MTP R 15HD RSA SEQ
Number/signal type1 analog VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs,
component video (YUVi or YUVp/HDTV), S-video, or
composite video
Maximum resolutionUp to 1920x1200 or 2048x1080 or 1080p at 300'
Up to 1024x768 at 600'
AUDIO OUTPUT
PowerCage FOX Rx VGA, PowerCage FOX Rx DVI Plus
Number/signal type1 unbalanced stereo or 2 unbalanced mono
Audio delay1.5 frames
AUDIO OUTPUT — POWERCAGE FOX RX AV
Number/signal type1 stereo, balanced/unbalanced or
2 mono, balanced/unbalanced
Audio delay1.5 frames
AUDIO OUTPUT — POWERCAGE MTP R 15HD RSA SEQ
Number/signal type1 mono, balanced/unbalanced
Connector(1) 3.5 mm captive screw connector, 5 pole
VIDEO — POWERCAGE FOX TX/RX VGA
AUDIO OUTPUT — POWERCAGE MTP R AV
Maximum resolution1600x1200 or 1080p @ 60 Hz, digitized pixel for pixel;
higher resolutions up to 2048x1120, undersampled
Number/signal type2 mono, balanced/unbalanced
Connector(1) 3.5 mm captive screw connector, 5 pole
VIDEO INPUT — POWERCAGE FOX TX VGA
GENERAL
Number/signal type1 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs
Power consumption*1 or 2* (positive-negative), 100 VAC to 240 VAC, 50-60
Hz; internal, hot-swappable
*A redundant power supply is optional.
CoolingEnclosure: fans, front to back
Boards: convection, within the PowerCage enclosure
Enclosure dimensions
PowerCage enclosure5.25" H x 17.0" W x 12.25" D ( high, full rack wide)
13.3 cm H x 43.2 cm W x 31.2 cm D
(Depth excludes connectors on the optional boards. Width
excludes rack ears.)
Shipping weight
PowerCage enclosure13 lbs (6 kg)
Boards2 lbs (1 kg) each
Regulatory compliance
SafetyCE, c-UL, UL
Additionally for FOX boards: FDA Class 1
EMI/EMCCE, C-tick, FCC Class A, ICES, VCCI
MTBF30,000 hours
Warranty3 years parts and labor
NOTE: All nominal levels are at ±10%.
VIDEO OUTPUT — POWERCAGE FOX RX VGA
Number/signal typeWith input from a FOXBOX Tx VGA or a FOX 500 Tx:
1 VGA-UXGA RGBHV, RGsB (follows input or can be set
by user)
With input from a FOXBOX Tx VGA/YUV:
1 VGA-UXGA RGBHV, component video (bi- or tri-level YUV,
480p, 576p, 720p, 1080i, 1080p)
Video delay1-2 frames
VIDEO — POWERCAGE FOX TX DVI, POWERCAGE FOX
TX/RX DVI PLUS
Resolution range
PowerCage FOX Tx DVIUp to 1600x1200 or 1080p @ 60 Hz pixel for pixel; higher
resolutions up to 1920x1200 @ 60 Hz, undersampled
PowerCage FOX Tx/Rx DVI PlusUp to 1920x1200 or 1080p @ 60 Hz pixel for pixel
FormatsRGB and YCbCr digital video
StandardsDVI 1.0, HDMI 1.2
VIDEO OUTPUT — POWERCAGE FOX RX DVI PLUS
Video delay1-2 frames
VIDEO INPUT — PowerCage FOX 3G HD-SDI transmitter
Input cable equalizationAutomatic for up to -30 dB of cable loss
HD-SDI120 m (400') using Extron RG6 cable
90 m (300') using Extron RG59 cable
SDI150 m (500') using Extron RG6 cable
120 m (400') using Extron RG59 cable
Model
Version Description
PowerCage 1600 Enclosure
3U, 16-Slot Frame
PowerCage 1600 Power Supply Kit Redundant Power Supply Option
For complete specifications, please go to www.extron.com
Specifications are subject to change without notice.
Part number
60-978-01
70-784-01
APPLICATION DIAGRAM
Building 1
Rackmount PC
Rackmount PC
INPUTS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
CONTROL
I/O
Satellite Receiver
ENTER
PRESET
VIEW
ESC
VIDEO
AUDIO
CONFIG
OUTPUTS
MVX SERIES
VGA MATRIX SWITCHER WITH ADPS™
Satellite Receiver
MVX 168 VGA A
VGA
MTP R 15HD RSA D
TP Receiver
Twisted Pair
Extron
PowerCage 1600
AUDIO RS-232
Tx Rx
OUTPUT
PowerCage
MTP T
15HD RSA
MTP R 15HD RSA D
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OFF
OFF
PRE-PEAK
ON
OFF
OFF
PRE-PEAK
ON
PRE-PEAK
ON
PEAKING
AUDIO RS-232
1 2
PRE-PEAK
ON
Rx
PowerCage
MTP T
15HD RSA
Tx Rx
OUTPUT
TP Receiver
INPUT
INPUT
INPUT
L
INPUT
AUDIO
R
Tx Rx
PowerCage
MTP T
15HD RSA
LEVEL
Tx Rx
Tx
PowerCage
MTP T
15HD RSA
REMOTE
RS-232 ALARM
Rx
Tx
1 2
Tx Rx
Tx Rx
REMOTE
RS-232 ALARM
L
AUDIO
R
RS-232
OVER FIBER
Rx
1 2
Tx Rx
Tx Rx
REMOTE
RS-232 ALARM
L
AUDIO
R
RS-232
OVER FIBER
1 2
Tx Rx
L
AUDIO
R
Tx Rx
REMOTE
RS-232 ALARM
Tx
PowerCage
FOX Tx RGB
R
L
Tx Rx
L
R
AUDIO INPUT
RS-232
Tx Rx
L
R
AUDIO INPUT
L
R
AUDIO INPUT
RS-232
RS-232
Tx Rx
Tx Rx
INPUT
RGB
RS-232
AUDIO INPUT
INPUT
RGB
RGB
100-240V
50/60Hz
5A MAX.
RGB
LISTED
1T23
L.T.E.
INPUT
US
INPUT
N15778
C
PowerCage
FOX Tx RGB
Rx
PowerCage
FOX Tx RGB
Tx
PowerCage
FOX Tx RGB
RS-232
OVER FIBER
PowerCage 1600
Power Supply
RS-232
OVER FIBER
PowerCage 1600
Power Supply
Flat Panel Displays
PEAKING
LEVEL
MTP 1500RL 15HD A
INPUT
BUFFERED OUTPUT
MTP
MTP
H+
V+
CSYNC
SOG
VIDEO
END
SPARE
TP Receiver
OUTPUT
POWER
12V
1.0A MAX
MONO
L
AUDIO
R
ON
MTP 1500RL 15HD A
MTP 1500RL 15HD A
INPUT
BUFFERED OUTPUT
MTP
MTP
H+
V+
CSYNC
SOG
VIDEO
END
SPARE
TP Receiver
OUTPUT
POWER
12V
1.0A MAX
MONO
L
AUDIO
R
ON
MTP 1500RL 15HD A
Fiber
Building 2
FOXBOX DVI Plus
Fiber Receiver
Fiber
Flat Panel Displays
Rx
LINK
LINK
DVI
OVER
TEMP
AUDIO
Tx
CONFIG
FOXBOX Rx DVI Plus
POWER
12V
1.0A MAX
MODE
DVI-D OUTPUT
OPTICAL
AUDIO
RS-232
OVER FIBER ALARM
Tx Rx
FOXBOX Rx DVI Plus
1
2
Fiber
Rx
CONFIG
LINK
LINK
DVI
OVER
TEMP
AUDIO
Tx
INPUTS
FOXBOX Rx DVI Plus
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
POWER
12V
1.0A MAX
MODE
DVI-D OUTPUT
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
OPTICAL
AUDIO
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
CONFIG
ENTER
PRESET
VIEW
2
Fiber Receiver
ESC
PRIMARY
REDUNDANT
OUTPUTS
1
FOXBOX DVI Plus
CONTROL
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
RS-232
OVER FIBER ALARM
Tx Rx
FOXBOX Rx DVI Plus
POWER SUPPLY
FOX MATRIX 3200
Fiber
FOXBOX VGA
Fiber Receiver
FIBER OPTIC DIGITAL MATRIX SWITCHER
LINK
FOXBOX Rx VGA
MODE
POWER
12V
1.0A MAX
Rx
LINK
RGB
OVER
TEMP
AUDIO
Tx
CONFIG
FOX Matrix 3200
OPTICAL
RGB OUTPUT
AUDIO
FOXBOX Rx VGA
RS-232
OVER FIBER ALARM
Tx Rx
1
2
Fiber
MODE
LINK
Rx
LINK
RGB
OVER
TEMP
AUDIO
Tx
CONFIG
FOXBOX Rx VGA
POWER
12V
1.0A MAX
RGB OUTPUT
AUDIO
FOXBOX Rx VGA
OPTICAL
RS-232
OVER FIBER ALARM
Tx Rx
1
2
FOXBOX VGA
Fiber Receiver
Extron USA - West
Headquarters
+800.633.9876
Inside USA / Canada Only
+1.714.491.1500
+1.714.491.1517 FAX
www.extron.com
Extron USA - East
Extron Europe
Extron Middle East
Extron Asia
Extron Japan
Extron China
+800.633.9876
+800.3987.6673
+971.4.2991800
+971.4.2991880 FAX
+800.7339.8766
+81.3.3511.7655
+81.3.3511.7656 FAX
+400.883.1568
Inside USA / Canada Only
Inside Europe Only
+1.919.863.1794
+1.919.863.1797 FAX
+31.33.453.4040
+31.33.453.4050 FAX
Inside Asia Only
+65.6383.4400
+65.6383.4664 FAX
© 2011 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners.
Inside China Only
+86.21.3760.1568
+86.21.3760.1566 FAX
02-2010
68-1849-01
REV. A4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement