Sharp CD-XP200W Specification

Sharp CD-XP200W Specification
MINI COMPONENT SYSTEM
Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
CD-XP200W Mini Component System consisting of CD-XP200W (main
unit) and CP-XP200 (speaker system).
MODEL
CD-XP200W
OPERATION MANUAL
CDXP200WA_FRONT
1
Downloaded From Disc-Player.com Sharp Manuals
02.4.2, 5:31 PM
CD-XP200W
Special notes
Warning:
CAUTION
! When the ON/STAND-BY button is set at STAND-BY position, mains voltage is
still present inside the unit. When the ON/STAND-BY button is set at STAND-BY
position, the unit may be brought into operation by the timer mode or remote control.
! This unit contains no user serviceable parts. Never remove covers unless qualified
to do so. This unit contains dangerous voltages, always remove mains plug from
the socket before any service operation and when not in use for a long period.
! To prevent fire or shock hazard, do not expose this appliance to dripping or
splashing. No objects filled with liquids, such as vases, should be placed on the
apparatus.
! This product is classified as a CLASS 1 LASER product.
! Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
As the laser beam used in this compact disc player is harmful to the eyes, do not
attempt to disassemble the cabinet. Refer servicing to qualified personnel only.
Laser Diode Properties
Material: GaAIAs
Wavelength: 780 nm
Emission Duration: continuous
Laser Output: max. 0.6 mW
- Special notes -
Important Instruction
ENGLISH
Note for users in Australia:
Copyright may exist in material you wish to record. Copying or broadcasting such
material without permission of the relevant licensees or owners of the copyright is
prohibited by law. SHARP is not in a position to authorise the copying or broadcasting of copyright materials and nothing in this OPERATION MANUAL should be
implied as giving that authority.
For other countries:
Audio-visual material may consist of copyrighted works which must not be recorded
without the authority of the owner of the copyright. Please refer to the relevant laws in
your country.
E-1
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)1.fm
Accessories
CD-XP200W
ENGLISH
Please confirm that the following accessories are included.
Remote control 1
"AAA" size battery (UM-4, R03, HP-16
or similar) 2
AM loop aerial 1
FM aerial 1
Note:
" General Information
Page
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 6
" Preparation for Use
System connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 9
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Page
" Tape Playback
Listening to a cassette tape (TAPE 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Listening to a cassette tape (TAPE 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
" Karaoke
Playing karaoke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19, 20
" Basic Operation
" Tape Recording
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Recording from a CD (CDs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Recording from the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Dubbing from tape to tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Erasing recorded tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
" CD Playback
Listening to a CD (CDs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12, 13
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Programmed play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
" Radio
Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Memorising a station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
To recall a memorised station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
To scan the preset stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
To erase entire preset memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
- Accessories / Contents -
Contents
General Information
Only the above accessories are included.
" Advanced Features
Timer and sleep operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 24
Enhancing your system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
" References
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26, 27
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
E-2
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)1.fm
CD-XP200W
ENGLISH
Precautions
" General
" Volume control
! Please ensure that the equipment is positioned in a well ventilated area and
ensure that there is at least 10 cm (4") of free space along the sides, top and back
of the equipment.
The sound level at a given volume setting depends on speaker efficiency, location,
and various other factors. It is advisable to avoid exposure to high volume levels, to
avoid this do not turn the volume on to full at switch on and listen to music at moderate levels.
10 cm (4")
10 cm (4")
10 cm (4")
" Condensation
- Precautions -
General Information
10 cm (4")
! Use the unit on a firm, level surface free from vibration.
! Keep the unit away from direct sunlight, strong magnetic fields, excessive dust,
humidity and electronic/electrical equipment (home computers, facsimiles, etc.)
which generates electrical noise.
! Do not place anything on top of the unit.
! Do not expose the unit to moisture, to temperatures higher than 60°C (140°F) or to
extremely low temperatures.
! If your system does not work properly, disconnect the AC power lead from the wall
socket. Plug the AC power lead back in, and then turn on your system.
! In case of an electrical storm, unplug the unit for safety.
! Hold the AC power plug by the head when removing it from the wall socket, as
pulling the lead can damage internal wires.
! Do not remove the outer cover, as this may result in electric shock. Refer
internal service to your local SHARP service facility.
! The ventilation should not be impeded by covering the ventilation openings with
items, such as newspapers, tablecloths, curtains, etc.
! No naked flame sources, such as lighted candles, should be placed on the apparatus.
! Attention should be drawn to the environmental aspects of battery disposal.
! This unit should only be used within the range of 5°C - 35°C (41°F - 95°F).
Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, tape heads, etc.) or on
the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens, leave the power on
with no disc (or cassette) in the unit until normal playback is possible (about 1 hour).
Wipe off any condensation on the transmitter with a soft cloth before operating the
unit.
" Care of compact discs
Compact discs are fairly resistant to damage, however mistracking can occur due to
an accumulation of dirt on the disc surface. Follow the guidelines below for maximum
enjoyment from your CD collection and player.
! Do not write on either side of the disc, particularly the non-label side from which
signals are read. Do not mark this surface.
! Keep your discs away from direct sunlight, heat, and excessive moisture.
! Always hold the CDs by the edges. Fingerprints, dirt, or water on the CDs can
cause noise or mistracking. If a CD is dirty or does not play properly, clean it with a
soft, dry cloth, wiping straight out from the centre, along the radius.
NO
Warning:
The voltage used must be the same as that specified on this unit. Using this product
with a higher voltage other than that which is specified is dangerous and may result
in a fire or other type of accident causing damage. SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which
is specified.
YES
Correct
E-3
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)1.fm
Controls and indicators
CD-XP200W
ENGLISH
" Front panel
9
10
4
5
6
11
7
12
13
14
8
15
17
18
19 20
16
- Controls and indicators -
1
2
3
General Information
Reference page
1. Disc Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2. Timer Set Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
3. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 21
6. Headphone Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
7. Microphone Level Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
8. Microphone Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
9. Tape (1 2) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 18, 22
10.Video/Auxiliary Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 25
11.Equaliser Mode Select/Extra Bass/Demo Mode Button . . . . . . . . 10
12.Disc Tray Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
13.Disc Skip Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
14.Volume Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
15.Tape 1 Cassette Compartment . . . . . . . . . . . . . . . . . . . . . . . . . 17, 22
16.Tape 2 Cassette Compartment . . . . . . . . . . . . . . . . . . . . . . . . . 18, 22
17.CD Track Down or Fast Reverse, Tape 2 Fast Wind,
Tuner Preset Down Button . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 16, 18
18.CD Track Up or Fast Forward, Tape 2 Fast Wind,
Tuner Preset Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 16, 18
19.Clock Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11, 23
20.Timer/Sleep Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 24
21.Tape 2 Reverse Mode Select Button . . . . . . . . . . . . . . . . . . . . . . . . 18
22.Tape 2 Reverse Play Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
23.CD Play or Repeat, Tape 1 Play,
Tape 2 Forward Play Button . . . . . . . . . . . . . . . . . . . . . . 12, 14, 17, 18
24.CD or Tape Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 17, 18
25.Tuning and Time Down Button . . . . . . . . . . . . . . . . . . . . . . . . . 11, 15
26.Memory/Set Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11, 14, 16
27.Tape 2 Record Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 22
28.Tuning and Time Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11, 15
21 22 23 24 25 26 27 28
Description of remote control (See page 6.)
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)1.fm
E-4
CD-XP200W
Controls and indicators (continued)
ENGLISH
" Display
1
2
3
4 5 67 8 9
12
13
10
11
- Controls and indicators -
General Information
14 15 16
4
5
6
7
8
9
1
2
1. CD Pause Indicator
2. Extra Bass Indicator
3. Disc Number Indicators
4. Tape 2 Record Indicator
5. FM Stereo Mode Indicator
6. FM Stereo Receiving Indicator
7. Timer Play Indicator
8. Sleep Indicator
9. Timer Recording Indicator
10.CD Play Indicator
11.CD Repeat Play Indicator
12.Karaoke Mode Indicator
13.Tape Reverse Mode Indicator
14.Tape 2 Reverse Play Indicator
15.Tape 1 Play or Tape 2 Forward Play Indicator
16.Memory Indicator
" Rear panel
Reference page
10
3
1
1. Cooling Fan
2. AC Voltage Selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
3. AC Power Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7, 8
4. Transport Screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7, 27
5. FM 75 Ohms Aerial Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
6. FM Aerial Earth Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
7. AM Loop Aerial Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
8. Span Selector Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
9. Video/Auxiliary (Audio Signal) Input Sockets . . . . . . . . . . . . . . . . .25
10.Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7, 8
Note:
This product is equipped with a cooling fan inside, which begins to run at a specified
volume level for better heat radiation.
2
3
" Speaker system
3
4
1. Tweeter
2. Woofer
3. Bass Reflex Duct
4. Speaker Wire
E-5
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)1.fm
CD-XP200W
ENGLISH
! Remote control
14
3
15
4
5
6
7
8
16
17
18
19
20
9
10
11
12
13
21
22
23
Buttons with " " mark in the illustration can be operated on the remote control
only.
Battery installation for remote control (See page 9.)
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)1.fm
- Controls and indicators -
2
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 12, 14, 21
4. CD Random Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5. CD Memory Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6. Karaoke Mode Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
7. Tape 2 Record Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21, 22
8. CD Track Down or Fast Reverse, Tape 2 Fast Wind Button . . . . 13, 18
9. CD or Tape Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 17, 18
10.Tape 2 Reverse Play Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
11.CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 21
12.Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
13.Video/Auxiliary Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
14.Extra Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
15.Equaliser Mode Select Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
16.CD Clear Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
17.Echo Level Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 19
18.Tuner Preset Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 16
19.CD Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
20.CD Track Up or Fast Forward, Tape 2 Fast Wind Button . . . . . . . 13, 18
21.CD Play or Repeat, Tape 1 Play,
Tape 2 Forward Play Button . . . . . . . . . . . . . . . . . . . . . . . 12, 14, 17, 18
22.Tape (1 2) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 18, 22
23.Volume Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
General Information
Reference page
1
E-6
CD-XP200W
System connections
ENGLISH
! Aerial connection
FM aerial
Supplied FM aerial:
Connect the FM aerial wire to the FM 75
OHMS terminal and position the FM aerial wire
in the direction where the strongest signal can
be received.
AM loop aerial
Transport screw
Left speaker
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP
socket. Position the AM loop aerial for optimum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with
screws (not supplied).
Note:
Placing the aerial on the stereo system or near the AC power lead may cause noise
pickup. Place the aerial away from the stereo system for better reception.
- System connections -
Preparation for Use
Right speaker
Installing the AM loop aerial:
< Assembling >
< Attaching to the wall >
Wall
Screws (not supplied)
External FM aerial:
Use an external FM aerial if you require better reception. Consult your dealer.
External
FM aerial
Wall socket
(See page 8.)
75 ohm
coaxial
cable
! Removing the transport screw
Before turning the power on, be sure to remove the transport screw
on the back of the unit using a flat head screwdriver or a coin.
Note:
This screw is required when transporting the unit again. Please keep it (see page
27).
Note:
When an external FM aerial is used, disconnect the supplied FM aerial wire.
E-7
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)1.fm
CD-XP200W
ENGLISH
! Speaker connection
! Setting the AC voltage selector
Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) terminal.
Check the setting of the AC voltage selector located on the rear panel before plugging the unit into a wall socket. If necessary, adjust the selector to correspond to the
AC power voltage used in your area.
Right speaker
Left speaker
Turn the selector with a screwdriver until the appropriate voltage
number appears in the window (110 V, 127 V, 220 V or 230 V - 240 V
AC).
! Connecting the AC power lead
" The unit will start the tape initialisation when plugged in to the AC socket. During
this process, initialising sound will be heard and the unit cannot be turned on. Wait
until the process is finished.
" Unplug the AC power lead from the wall socket if the unit will not be in use for a
prolonged period of time.
Black
Caution:
" Use speakers with an impedance of 6 ohms or more, as
lower impedance speakers can damage the unit.
" Do not mistake the right and the left channels. The right
speaker is the one on the right side when you face the unit.
" Do not let the bare speaker wires touch each other.
" Do not allow any objects to fall into or to be placed in the
bass reflex ducts.
" Do not stand or sit on the speakers. You may be injured.
230V
240V
Incorrect
! Placing the speaker system
- System connections -
Notes:
Red
Preparation for Use
After making all connections, plug the unit. If you plug the unit first,
the unit will enter the demonstration mode.
Wall socket
There is no distinction between the right and the left speakers.
Left speaker
Right speaker
(230 - 240 V, 50/60 Hz)
Note:
The speaker grilles are not removable.
Demonstration mode (See page 10.)
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)1.fm
E-8
CD-XP200W
System connections (continued)
Remote control
! Setting the FM/AM span selector
! Battery installation
ENGLISH
1 Open the battery cover.
2 Insert the batteries according to the direction indicated in the battery compartment.
When inserting or removing the batteries, push them towards the
nals.
battery termi-
Preparation for Use
- System connections / Remote control -
3 Close the battery cover.
Precautions for battery use:
" Replace all old batteries with new ones at the same time.
" Do not mix old and new batteries.
" Remove the batteries if the unit is not to be used for long periods of time. This will
prevent potential damage due to battery leakage.
Caution:
" Do not use rechargeable batteries (nickel-cadmium battery, etc.).
" Installing the batteries incorrectly may cause the unit to malfunction.
Notes concerning use:
The International Telecommunication Union (ITU) has established that member
countries should maintain either a 100 kHz or a 50 kHz interval between broadcasting frequencies of FM stations and 10 kHz or 9 kHz for AM station. The illustration
shows the 50/9 kHz zones (regions 1 and 3), and the 100/10 kHz zone (region 2).
Before using the unit, set the SPAN SELECTOR switch (on the rear panel) to the
interval (span) of your area.
To change the tuning zone:
1 Press the ON/STAND-BY button to enter the stand-by mode.
2 Set the SPAN SELECTOR switch (on the rear panel) as follows.
" For 50 kHz FM interval (9 kHz in AM) 50/9
" For 100 kHz FM interval (10 kHz in AM) 100/10
3 Whilst pressing down the CLOCK button and the EQUALIZER/X-BASS/DEMO button, press the ON/STAND-BY button until "CLEAR AL" appears.
Caution:
This operation will erase all data stored in memory including clock, timer settings,
tuner preset, and CD programme.
" Replace the batteries if the operating distance is reduced or if the operation
becomes erratic. Purchase 2 "AAA" size batteries (UM-4, R03, HP-16 or similar).
" Periodically clean the transmitter on the remote control and the sensor on the unit
with a soft cloth.
" Exposing the sensor on the unit to strong light may interfere with operation.
Change the lighting or the direction of the unit.
" Keep the remote control away from moisture, heat, shock, and vibrations.
! Test of the remote control
Check the remote control after checking all connections have been made correctly. (See pages
7 - 8.)
Point the remote control directly at the remote
sensor on the unit.
The remote control can be used within
the range shown:
Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy music.
E-9
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)1.fm
Remote sensor
0.2 m - 6 m
(8" - 20')
General control
CD-XP200W
! Extra bass (X-BASS)/Pre-programmed
equaliser
ENGLISH
(Main unit operation)
You can select the extra bass and pre-programmed equaliser modes with the same
button on the main unit.
Changing the mode:
Bass frequencies are emphasised.
FLAT (X-BASS off)
The sound is not modified.
POPS (X-BASS off)
Bass and treble are slightly emphasised.
! Demonstration mode
ROCK (X-BASS off)
Bass and treble are emphasised.
The first time the unit is plugged in, the unit will enter
the demonstration mode. You will see words scroll.
CLASSIC (X-BASS off)
Treble is reduced a lot.
VOCAL (X-BASS off)
Vocals (midrange tones) are emphasised.
JAZZ (X-BASS off)
Treble is cut a little.
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode), press the
EQUALIZER/X-BASS/DEMO button. The demonstration mode will be cancelled and
the display will disappear.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the EQUALIZER/X-BASS/DEMO
button again.
(Remote control operation)
To enter or cancel the extra bass mode:
Note:
When the power is first turned on, the unit will enter the extra bass mode which
emphasises the bass frequencies, and "X-BASS" will appear. To cancel the extra
bass mode, press the X-BASS button.
When the power is on, the EQUALIZER/X-BASS/DEMO button can be used to select
the extra bass mode.
Selecting a pre-programmed equaliser mode:
! To turn the power on
- General control -
X-BASS (X-BASS on)
Basic Operation
When the EQUALIZER/X-BASS/DEMO button is pressed, the current mode setting
will be displayed. To change to a different mode, press the EQUALIZER/X-BASS/
DEMO button repeatedly until the desired sound mode appears.
When the EQ-MODE button is pressed, the current mode setting will be displayed.
To change to a different mode, press the EQ-MODE button repeatedly until the
desired sound mode appears.
Press the ON/STAND-BY button to turn the power on.
FLAT
To set the unit to stand-by mode:
Press the ON/STAND-BY button again.
! Volume control
Press the VOLUME ( or ) button to increase or decrease the volume.
0
1
POPS
JAZZ
ROCK
CLASSIC
VOCAL
Note:
If the EQ-MODE button on the remote control is pressed in the extra bass mode, it
will be cancelled automatically.
2 ..... 29 30 MAXIMUM
E-10
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)1.fm
CD-XP200W
Setting the clock
ENGLISH
4
Press the TUNING/TIME ( or ) button to adjust the hour and then
press the MEMORY/SET button.
! Press the TUNING/TIME ( or ) button once to advance the time by 1 hour.
Hold it down to advance continuously.
! When the 12-hour display is selected, "AM" will change automatically to "PM".
Press the TUNING/TIME ( or ) button to adjust the minutes and
then press the MEMORY/SET button.
In this example, the clock is set for the 24-hour (0:00) display.
- Setting the clock -
Basic Operation
5
1
2
Press the ON/STAND-BY button to turn the power on.
! Press the TUNING/TIME ( or ) button once to advance the time by 1
minute. Hold it down to change the time in 5-minute intervals.
Press the CLOCK button and within 5 seconds, press the MEMORY/SET button.
! The hour will not advance even if minutes advance from "59" to "00".
! The clock begins counting from "0" seconds. (Seconds are not displayed.)
The time display will disappear after a few seconds.
To confirm the time display:
3
Press the TUNING/TIME ( or ) button to select 24-hour or 12hour display and then press the MEMORY/SET button.
Press the CLOCK button.
The time display will appear for about 5 seconds.
Note:
The "CLOCK" or time will flash at the push of the CLOCK button when the AC power
supply is restored after a power failure or unplugging the unit.
Readjust the clock as follows.
"0:00"
The 24-hour display will appear.
(0:00 - 23:59)
"AM 12:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
"AM 0:00"
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
Note that this can only be set when the unit is first installed or it has been reset.
[Refer to "Clearing all the memory (reset)" on page 27 for details.]
To readjust the clock:
Perform "Setting the clock" from step 1. If the time display is flashing, step 3 (for
selecting the 24-hour or 12-hour display) will be skipped.
To change the 24-hour or 12-hour display:
1
2
Clear all the programmed contents. [Refer to "Clearing all the memory (reset)" on
page 27 for details.]
Perform "Setting the clock" from step 1.
E-11
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)2.fm
Listening to a CD (CDs)
CD-XP200W
ENGLISH
Press the
OPEN/CLOSE button to close the disc tray.
Total number of tracks on the CD
whose number is flashing
1
2
3
4
6
To select the CD you want to listen to first, press one of
buttons on the remote control.
7
Press the
(
1-
3
) button to start playback.
! Playback will begin from track 1 on the disc you have selected to play. After
that disc finishes playing, the next disc will automatically start playback.
Press the ON/STAND-BY button to turn the power on.
! When the last track on the third disc has finished playing, the CD player will
stop automatically.
Press the CD button.
Press the
Total playing time of the CD whose
number is flashing
! When there is no CD in one of the disc 1 - 3 positions, that position will be
skipped and the next CD will be played.
OPEN/CLOSE button to open the disc tray.
Place the CD(s) on the disc tray, label side up.
When loading a third disc, press the DISC SKIP button to turn the
disc tray, then place the CD in the open position.
! CDs can be placed on any open position on the disc tray.
! Be sure to place 8 cm (3") CD(s) in the middle of the disc positions.
To interrupt playback:
Press the CD button on the remote control.
To resume playback from the same point, press the
CD Playback
5
- Listening to a CD (CDs) -
This system can also play audio CD-R and CD-RW discs, but cannot record.
Some audio CD-R and CD-RW discs may not be playable due to the state of disc or
the device that was used for recording.
button.
To stop playback:
Press the
button.
To remove the CDs:
12 cm (5")
8 cm (3")
Whilst in the stop mode, press the OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to
rotate the disc tray and remove the remaining disc.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
General control (See page 10.)
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)2.fm
E-12
CD-XP200W
Listening to a CD (CDs) (continued)
ENGLISH
" To locate the beginning of a track
To move to the beginning of the next track:
Press the
/
button for less than 0.5 seconds during playback.
/
button repeatedly until the de! You can skip to any track by pressing the
sired track number appears.
To restart the track being played:
" Starting playback with a desired track
You can play a disc starting with the desired track.
1
Whilst in the stop mode, press one of the 1 - 3 buttons on the
remote control or DISC SKIP button to select the desired disc.
2
Press the
/
or
/
button to select the desired track.
Selected disc number
Press the
/
button for less than 0.5 seconds during playback.
/
button repeatedly until the de! You can skip to any track by pressing the
sired track number appears.
CD Playback
- Listening to a CD (CDs) -
Notes:
! You can locate the beginning of a track on a single disc only.
or
button on the remote control allows you to locate the begin! The
ning of a track.
" To locate the desired portion
For audible fast forward:
Press and hold down the
/
button during playback.
For audible fast reverse:
Press and hold down the
/
button during playback.
Notes:
/
or
/
button is released.
! Normal playback will resume when the
! You can locate the desired portion on a single disc only.
! When the end of the last track is reached during fast forward, "END" will appear on
the display and CD operation will be paused. When the beginning of the first track
is reached during fast reverse, the unit will enter the playback mode.
or
button on the remote control allows you to locate the desired
! The
portion.
Selected track number
You can also select a track by pressing the
control.
3
Press the
(
or
) button to start playback.
Playback of the selected track is started. When the end of last track of the disc
selected is reached, the next disc will be automatically started.
Notes:
! When the DISC SKIP button is pressed during playback, the next disc will begin
automatically.
! When one of the 1 - 3 buttons on the remote control is pressed during playback, the selected disc will begin automatically.
Caution:
! Do not place two CDs in one disc tray.
! Do not play discs with special shapes (heart- or octagon-shaped). It may cause
malfunctions.
! Do not push the disc tray whilst it is moving.
! Do not turn the disc tray by hand. This may cause malfunctions.
! If the power fails whilst the tray is open, wait until the power is restored.
! If the disc tray is stopped forcibly, "ER-CD10" will appear on the display for 3 seconds and the unit will not function. If this occurs, press the ON/STAND-BY button
to enter the power stand-by mode and then turn the power on again.
! If TV or radio interference occurs during CD operation, move the unit away from
the TV or radio.
! If a disc is damaged, dirty, or loaded upside down, the disc will skip.
E-13
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
button on the remote
CD-XP200W(A)2.fm
CD-XP200W
ENGLISH
" Repeat play
" Programmed play
All tracks on up to 3 discs, or a programmed sequence can be continuously repeated.
You can choose up to 32 selections for playback in the order you like.
Press the
(
1
Whilst in the stop mode, press one of
the 1 - 3 buttons on the remote
control to select the desired disc.
2
Press the
/
or
/
select the desired track.
) button twice.
Perform steps 1 - 4 in the "Programmed play" section and then press the
button twice.
(
button to
You can also select a track by pressing the
control.
To repeat a desired track:
)
3
Selected disc number
Selected track number
or
button on the remote
Press the MEMORY/SET (MEMORY) button to save the track number.
Press the (
" " will go out.
) button again.
" Random play
Playback order
When the track is memorised, "MEMORY" will appear.
The tracks on the disc(s) can be played in random order automatically.
Press the RANDOM button on the remote control to begin random
play.
4
Repeat steps 1 - 3 for other tracks. Up to 32 tracks can be programmed.
If you make a mistake, the programmed tracks can be cleared by pressing the
CLEAR button.
5
Press the
(
) button to start playback.
CD Playback
To cancel repeat play:
- Listening to a CD (CDs) -
To repeat all tracks on up to 3 discs:
To clear the programmed selections:
Press the CLEAR button on the remote control whilst the
"MEMORY" indicator is lit.
Each time the button is pressed, one track will be cleared,
beginning with the last track programmed. When all the
tracks are cleared, "MEMORY" will disappear.
To cancel random play:
Press the
button.
Notes:
button during random play, you can move to the track
! If you press the
selected next by the random operation. On the other hand, the
button does
not allow you to move to the previous track. The beginning of the track being
played will be located.
! In random play, the CD player will select and play tracks automatically. (You cannot select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the
disc(s) will play continuously.
button. Otherwise, the
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator will be displayed. Then follow steps 1 - 3 to add tracks. The new tracks will be stored after the
last track of the original programme.
Notes:
! Opening the disc tray automatically cancels the programmed sequence.
! Even if you press the ON/STAND-BY button to enter the stand-by mode or change
the function from CD to another, the programmed selections will not be cleared.
! During programme operation, random play is not possible.
E-14
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)2.fm
CD-XP200W
Listening to the radio
ENGLISH
" Tuning
1 Press the ON/STAND-BY button to turn the power on.
2 Press the TUNER (BAND) button repeatedly to select the desired
frequency band (FM or AM).
3
Press the TUNING/TIME (
station.
Manual tuning:
or
) button to tune in to the desired
Press the TUNING/TIME button as many times as required to tune in to the desired station.
Auto tuning:
Radio
- Listening to the radio -
When the TUNING/TIME button is pressed for more than 0.5 seconds, scanning
will start automatically and the tuner will stop at the first receivable broadcast station.
Notes:
! When radio interference occurs, auto scan tuning may stop automatically at
that point.
! Auto scan tuning will skip weak signal stations.
! To stop the auto tuning, press the TUNING/TIME button again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
! " " will appear when an FM broadcast is in stereo.
FM stereo mode indicator
FM stereo receiving indicator
! If the FM reception is weak, press the TUNER (BAND) button to extinguish the
"ST" indicator. The reception changes to monaural, and the sound becomes
clearer.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Note:
This product can receive FM stereo/FM monaural and AM monaural broadcasts. AM
stereo broadcasts will not be played in stereo.
E-15
General control (See page 10.)
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)2.fm
CD-XP200W
ENGLISH
! Memorising a station
! To recall a memorised station
You can store 40 AM and FM stations in memory and recall them at the push of a
button. (Preset tuning)
Perform steps 1 - 3 in "Tuning" on page 15.
Press the MEMORY/SET button to enter the preset tuning saving
mode.
Within 30 seconds, press the PRESET (
preset channel number.
or
) button to select the
Store the stations in memory, in order, starting with preset channel 1.
4
Preset channel
Frequency and frequency band
This operation can be performed by pressing the TUNER PRESET ( or ) button
or
or
button on the remote control.
! To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset memory scan)
1
Within 30 seconds, press the MEMORY/SET button to store that
station in memory.
2
If the "MEMORY" and preset number indicators go out before the station is
memorised, repeat the operation from step 2.
5
) button for less than 0.5 seconds to select
Repeat steps 1 - 4 to set other stations, or to change a preset station.
Press the PRESET ( or ) button for more than 0.5 seconds.
" The preset number will flash and the programmed stations will be tuned in sequentially, for 5 seconds each.
" This operation can be performed by pressing the TUNER PRESET ( or )
button or
or
button on the remote control.
Press the PRESET ( or ) button again when the desired station is located.
! To erase entire preset memory
1
2
Press the ON/STAND-BY button to enter the stand-by mode.
Whilst pressing down the TUNER (BAND) button and the EQUALIZER/X-BASS/
DEMO button, press the ON/STAND-BY button until "TUNER CL" appears.
Radio
3
or
- Listening to the radio -
1
2
Press the PRESET (
the desired station.
When a new station is stored in memory, the station previously memorised will
be erased.
Note:
The backup function protects the memorised stations for a few hours should there be
a power failure or the AC power lead disconnection.
Tuning (See page 15.)
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)2.fm
E-16
CD-XP200W
Listening to a cassette tape (TAPE 1)
ENGLISH
Tape Playback
- Listening to a cassette tape (TAPE 1) -
Before playback:
" For playback, use normal or low-noise tapes for the best sound.
(Metal or CrO tapes are not recommended.)
" Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions.
" Before loading a tape into the cassette compartment, tighten the slack
with a pen or a pencil.
E-17
1
2
3
Press the ON/STAND-BY button to turn the power on.
4
Load a cassette into the TAPE 1 cassette compartment with the
side to be played facing toward you.
5
Press the
Press the TAPE (1
2) button to select TAPE 1.
Open the cassette door by pushing the area marked "
EJECT".
(
) button to start playback.
To stop playback:
Press the
button.
Note:
You cannot fast-forward or rewind the cassette in the TAPE 1 compartment.
General control (See page 10.)
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)2.fm
PUSH
Listening to a cassette tape (TAPE 2)
CD-XP200W
4
Load a cassette into the TAPE 2 cassette compartment with side A facing
you.
5
Press the
button to choose one
side or both sides.
... To listen to both sides.
... For endless repeat play of both sides.
... To listen to one side.
6
Press the (
for side B.
) button to listen to side A, or the
(
T-2) button
To play both sides ( ), start from side A. When playback starts from side B, side
A will not be played.
To stop playback:
Press the
button.
Fast forward/rewind on side A:
To advance the tape, press the
ton.
/
button. To rewind it, press the
/
but-
button. To rewind it, press the
/
but-
Tape Playback
Open the cassette door by pushing
the area marked " PUSH EJECT".
- Listening to a cassette tape (TAPE 2) -
ENGLISH
3
Fast forward/rewind on side B:
To advance the tape, press the
ton.
1
2
Press the ON/STAND-BY button to turn the power on.
Press the TAPE (1
2) button to select TAPE 2.
/
Caution:
" To remove the cassette, press the button, and then open the compartment.
" Before changing from one tape operation to another, press the button.
" If a power failure occurs during tape operation, the tape head will remain engaged
with the tape and the cassette door will not open. Wait until the power is restored.
General control (See page 10.)
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)2.fm
E-18
CD-XP200W
Playing karaoke
ENGLISH
You can enjoy karaoke to CDs, radio, cassettes, and other external devices by connecting a separately available microphone to this unit.
1
Set the MIC LEVEL control to MIN to protect the speakers from
shock noise and to avoid disturbing noises.
2
Connect the microphone to the MIC socket.
" Use a microphone with a 6.3 mm (1/4") plug, an impedance of 600 ohms.
" Use a standard plug adaptor when using a microphone with a 3.5 mm (1/8")
diameter plug.
3
4
Press the ON/STAND-BY button to turn the power on.
Press one of the CD, TUNER (BAND), TAPE (1
buttons to select the audio source and play it.
2), VIDEO/AUX
Karaoke
- Playing karaoke -
If you wish to record, start recording in the TAPE 2 compartment. (Refer to pages
21 - 22 for details.)
5
6
Adjust the volume of the audio source using the VOLUME buttons.
7
Press the ECHO LEVEL button on the remote control to increase
the microphone echo, and the ECHO LEVEL button to decrease
it.
Turn the MIC LEVEL control towards MAX to increase the microphone volume and towards MIN to decrease it.
Notes:
" When you sing too loud through the microphone, your voice may be distorted
depending on the devices connected. If this happens, lower the microphone volume.
" If an extremely sensitive microphone is used, howling may be generated.
" Unidirectional microphone is more appropriate for vocal use.
If squealing occurs:
"
"
"
"
Reduce the microphone volume.
Change the direction of the microphone.
Reduce the volume of the main unit.
Move the microphone away from the speakers.
Caution:
" When not using the microphone, remove it from the MIC socket.
" When connecting or disconnecting the microphone, set the MIC LEVEL control to
MIN.
E-19
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)2.fm
CD-XP200W
ENGLISH
Notes:
" The initial audio mode setting is "STEREO".
" In any mode other than the STEREO mode, " " will appear.
" The setting will remain unchanged when you change the disc, you set the unit to
the stand-by mode or the function is changed from the CD to another function.
" When playing a sound multiplexed disc on which a vocal and music have been
separately recorded, select the audio mode as desired.
! To change general stereo source to
karaoke source
Even ordinary discs and tapes not recorded specifically for karaoke can be used for
karaoke just by toning down the main vocal.
Press the KARAOKE button until "V-CANCEL" appears in the display.
" Use discs recorded in stereo. The function will not work with mono sources.
" With some discs and tapes the original vocals may still be heard.
! To change the audio mode
Sound of the playback source can be switched among the STEREO, L-CH, R-CH,
and V-CANCEL (VOCAL CANCEL) modes.
The audio mode function is used when the left and right channels have individual signals from each other.
Press the KARAOKE button until the desired audio mode is displayed.
Each time the KARAOKE button is pressed, the mode will change as follows:
STEREO
L-CH
R-CH
Notes on sound multiplexed karaoke discs:
Sound multiplexed karaoke discs are discs on which the main vocal and the BGM
(Background music) have been recorded on one of the two channels and only the
BGM on the other.
" The function will not work properly with discs which do not belong to this group.
" Discs on which vocal has been recorded on the left channel and music on the right
may not play properly.
Karaoke
Notes:
- Playing karaoke -
" " will appear.
V-CANCEL
STEREO
Sounds on the left and right channels are played.
L-CH
Sounds on the left channel only are played.
R-CH
Sounds on the right channel only are played.
V-CANCEL
The main vocal is lowered.
E-20
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)2.fm
CD-XP200W
Recording to a cassette tape
ENGLISH
Before recording:
! When recording important selections, make a preliminary test to ensure that the
desired material is properly recorded.
! SHARP is not liable for damage or loss of your recording arising from malfunction
of this unit.
! The volume and sound controls can be adjusted with no effect on the recorded
signal (Variable Sound Monitor).
! For recording, use only normal tapes. Do not use metal or CrO tapes.
Recording can be operated in the TAPE 2 compartment. The TAPE 1 is for playback only.
" Recording from a CD (CDs)
You can record 3 CDs continuously.
1
2
Press the ON/STAND-BY button to turn the power on.
Load a cassette into the TAPE 2 cassette compartment with side A
facing you.
Wind past the leader of the tape, on which recording cannot be performed.
Press the CD button and load the desired disc.
Press the
button to choose one
side or both sides.
... To record on both sides.
... To record on only one side.
- Recording to a cassette tape -
Tape Recording
3
4
5
Press one of the 1 - 3 buttons on the remote control to select
the disc to be recorded first.
6
Press the REC PAUSE (TAPE-2
button.
)
Recording will be paused.
7
Press the (
for side B.
) button to record on side A, or the
( T-2) button
! To record on both sides, begin on side A. (If recording is started from side B,
the tape will not switch over to side A.)
! Recording is started from the selected CD. When the playback of the last disc
is finished or the end of the tape is reached, the CD and the cassette will stop
automatically.
! CD playback will start approximately 7 seconds after the tape starts.
To perform programmed recording:
1
2
3
Programme discs and tracks. (See page 14.)
Press the REC PAUSE (TAPE-2
) button.
Press the (
) button to record on side A, or the
(
T-2) button for side B.
To stop recording:
E-21
Note:
Press the button.
The CD and tape will stop.
Whilst recording, OPEN/CLOSE button is deactivated. It is recommended to perform CD recording after closing the disc tray.
Auto restart function:
If the recording side is switched from side A to B during recording, the system will
record the interrupted track on side B from its beginning. The recording will be made
without cutting the beginning of the track on side B.
Programmed play (See page 14.)
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)3.fm
CD-XP200W
ENGLISH
" Recording from the radio
You can record from TAPE 1 to TAPE 2.
Tune in to the desired station. (See page 15.)
Load a cassette into the TAPE 2 cassette compartment with side A
facing you.
1
2
Wind past the leader of the tape, on which recording cannot be performed.
It is recommended that the recording tape is the same length as the master tape.
Press the
button to choose one
side or both sides.
3
... To record on both sides.
... To record on only one side.
4
Press the REC PAUSE (TAPE-2
button.
Press the (
for side B.
)
4
) button to record on side A, or the
( T-2) button
To record on both sides, begin on side A. (If recording is started from side B, the
tape will not switch over to side A.)
To interrupt recording:
Press the REC PAUSE (TAPE-2
) button.
To resume recording, press the same recording button you pressed in step 5. Other
buttons do not allow resuming.
To stop recording:
Press the
Press the TAPE (1
2) button until
"TAPE 1" appears on the display.
The reverse mode will be set to " ".
Recording will be paused.
5
Load a prerecorded cassette into the TAPE 1 cassette compartment. Insert a blank tape into the TAPE 2 cassette compartment.
button.
If you hear a whistling noise whilst recording an AM station, move the AM loop aerial.
Erase-prevention tab of cassette tapes:
! When recording on a cassette tape, make
sure that the erase-prevention tabs are not removed. Cassettes have removable tabs that
prevent accidental recording or erasing.
Tab for side B
! To protect the recorded sound, remove the tab
after recording. Cover the tab hole with adhesive tape to record on the tape without the tab.
Side A
)
Recording will be paused.
5
Press the
(
) button.
To stop dubbing:
Press the button.
TAPE 1 and TAPE 2 will simultaneously stop.
" Erasing recorded tapes
1
2
3
4
5
Note:
Press the REC PAUSE (TAPE-2
button.
Load the tape to be erased into the TAPE 2 cassette compartment with the side to
be erased facing toward you.
Press the TAPE (1 2) button until "TAPE 2" appears on the display.
Set the
button to " " to erase only one side and to " " to erase both sides.
Press the REC PAUSE (TAPE-2
) button.
Press the (
) button to erase side A, or the ( T-2) button to erase side B.
To erase both sides, begin from side A. (If erasing is started from side B, the tape
will not switch over to side A.)
Note:
Make sure that the TAPE 1 is not in use.
Tab for side A
Tuning (See page 15.)
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
Tape Recording
3
Press the ON/STAND-BY button to turn the power on.
- Recording to a cassette tape -
1
2
" Dubbing from tape to tape
CD-XP200W(A)3.fm
E-22
CD-XP200W
Timer and sleep operation
ENGLISH
Timer playback:
The unit turns on and plays the desired source (CD, tuner, tape) at the preset time.
" Timer playback or timer recording
Before setting timer:
Timer recording:
The unit turns on and starts recording from the tuner at the preset time.
1
Press the CLOCK button to check that the clock is on time.
2
For timer playback: Load a cassette or discs to be played.
For timer recording: Load a cassette for recording in the TAPE 2 cassette compartment.
1
2
Press the ON/STAND-BY button to turn the power on.
- Timer and sleep operation -
Advanced Features
Sleep operation:
The radio, compact disc and cassette tape can all be turned off automatically.
Press the CD, TUNER (BAND) or TAPE (1
desired function.
2) button to select the
To select the timer playback source: CD, TUNER (BAND) or TAPE (1
To select the timer recording source: TUNER (BAND).
When you selected the TUNER (BAND), tune in to the desired station.
3
Adjust the volume using the VOLUME buttons.
Do not turn the volume up too high.
4
Press the TIMER/SLEEP button repeatedly to select timer playback
or timer recording.
Display the white " " for timer playback and the red " " for timer
recording.
White
5
Setting the clock (See page 11.) /
Tuning (See page 15.)
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
Red
Press the TUNING/TIME ( or ) button to specify the hour to start,
then press the MEMORY/SET button.
The illustrations show the timer playback setting.
E-23
2).
CD-XP200W(A)3.fm
CD-XP200W
ENGLISH
6
7
Press the TUNING/TIME ( or ) button to specify the minutes,
then press the MEMORY/SET button.
" Sleep operation
1
2
Play back the desired sound source.
Press the TIMER/SLEEP button repeatedly until "SLEEP" is displayed.
The unit will enter the timer stand-by mode automatically.
Press the ON/STAND-BY button to turn the power on.
8
When the preset time is reached, playback or recording will start.
The volume will increase gradually until it reaches the volume you were listening
at before your system enters the timer stand-by mode.
9
In timer playback:
If you select CD or TAPE, the unit will enter the stand-by mode after the playback. If you select TUNER, it will enter the stand-by mode one hour after the timer playback starts.
3
4
or
) button.
Press the MEMORY/SET button.
Your system will enter the power stand-by mode automatically after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep operation finishes.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst the sleep timer is set.
In timer recording:
When the recording tape reaches its end, the timer recording will end, and the
unit will enter the stand-by mode.
To confirm the remaining sleep time:
Press the TIMER/SLEEP button whilst the sleep timer is set.
The remaining sleep time is displayed for about 5 seconds.
To reset or change the timer setting:
Perform "Timer playback or timer recording" from the beginning.
- Timer and sleep operation -
Whilst the sleep time is displayed, press the TUNING/TIME (
(Maximum: 3 hours - Minimum: 1 minute)
! 3 hours - 5 minutes 5-minute intervals
! 5 minutes - 1 minute 1-minute intervals
To cancel the timer playback/timer recording:
Advanced Features
To change the sleep time:
Note:
Once the sleep time is set, it will remain unchanged until a new time is entered.
Notes:
! Once the time is set, the setting will be retained until a new time is entered.
! When performing timer playback or recording using another unit connected to the
VIDEO/AUX sockets, select "VIDEO/AUX" in step 2.
At this time, only this unit will be turned on or enter the power stand-by mode automatically. It will enter the power stand-by mode when the end of the recording tape
is reached in timer recording or 1 hour after the playback starts in timer playback.
However, another unit will not be turned on or off.
E-24
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)3.fm
CD-XP200W
Enhancing your system
ENGLISH
The connection lead is not included. Purchase a commercially available lead as
shown below.
" Listening to the playback sounds from
VCR, DVD, etc.
VCR, DVD, etc.
1
To the line
output sockets
Red
When using video equipment, connect the audio output to this unit and the video
output to a television.
2
3
4
Press the ON/STAND-BY button to turn the power on.
Press the VIDEO/AUX button.
Play the connected equipment.
Note:
- Enhancing your system -
Advanced Features
White
Use a connection lead to connect the VCR, DVD, etc. to the VIDEO/
AUX sockets.
To prevent hum interference, place this unit away from a television.
Red
" To record on a tape
White
RCA lead
(not supplied)
1
2
3
4
5
Insert a cassette in the TAPE 2 cassette compartment.
Press the VIDEO/AUX button.
Press the REC PAUSE (TAPE-2
Press the
(
) or
(
) button.
T-2) button.
Play the VCR, DVD, etc.
" Headphones
! Before plugging in or unplugging the headphones, reduce the volume.
! Be sure your headphones have a 3.5 mm (1/8") diameter plug and are between 16
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
! Plugging in the headphones disconnects the speakers automatically. Adjust the
volume using the VOLUME buttons.
E-25
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)3.fm
Troubleshooting chart
Symptom
" The clock is not on time.
Possible cause
" Did a power failure occur? Reset the
clock. (Refer to page 11.)
" When a button is pressed, the unit " Set this unit to the power stand-by mode
does not respond.
and then turn it back on.
" If the unit still malfunctions, reset it. (Refer
to page 27.)
" No sound is heard.
" Is the volume level set to "0"?
" Are the headphones connected?
" Are the speaker wires disconnected?
" Is the karaoke mode set to "L-CH", "R-CH"
or "V-CANCEL"?
Symptom
" Cannot record.
" Cannot record tracks with proper
sound quality.
" Cannot erase completely.
" Sound skipping.
" Cannot hear treble.
" Sound fluctuation.
" Cannot remove the tape.
" Is the karaoke mode set to "L-CH", "R-CH"
or "V-CANCEL"?
Possible cause
" Playback does not start.
" Is the disc loaded upside down?
" Playback stops in the middle or is " Does the disc satisfy the standards?
not performed properly.
" Is the disc distorted or scratched?
" Playback sounds are skipped, or
stopped in the middle of a track.
" If a power failure occurs during playback,
the heads remain engaged with the tape.
Do not open the compartment forcibly.
Wait until electricity resumes.
Possible cause
" The vocal part of a multiplexed
disc is not heard.
Symptom
" Is there any slack?
" Is the tape stretched?
" Are the capstans, pinch rollers, or heads
dirty?
! Karaoke
Symptom
! CD player
Possible cause
" Is the erase-prevention tab removed?
" Is it a normal tape? (You cannot record on
a metal or CrO tape.)
" Is the unit located near excessive vibrations?
! Remote control
Symptom
Possible cause
" The remote control does not oper- " Is the AC power lead of the unit plugged
ate.
in?
" Is the battery polarity respected?
" Is the disc very dirty?
" Has condensation formed inside the unit?
" Are the batteries dead?
" Is the distance or angle incorrect?
" Does the remote control sensor receive
strong light?
! Tuner
Symptom
Possible cause
" Radio makes unusual noise consecutively.
" Is the unit placed near the TV or computer?
References
! General
ENGLISH
! Cassette deck
- Troubleshooting chart -
Many potential problems can be resolved by the owner without calling a service technician.
If something is wrong with this product, check the following before calling your authorised SHARP dealer or service centre.
CD-XP200W
" Is the FM aerial or AM loop aerial placed
properly? Move the aerial away from the
AC power lead or the unit if located near.
E-26
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)3.fm
CD-XP200W
Troubleshooting chart (continued)
Maintenance
! If trouble occurs
! Cleaning the tape-handling parts
ENGLISH
When this product is subjected to strong external interference (mechanical shock,
excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on again.
2 If the unit is not restored in the previous operation, unplug and plug in the unit,
and then turn the power on.
" Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean
these parts with a cotton swab moistened with commercial head/pinch roller
cleaner or isopropyl alcohol.
" When cleaning the heads, pinch rollers, etc., unplug the unit which contains high
voltages.
A
TAPE 1
B
C
B
C
Note:
References
- Troubleshooting chart / Maintenance -
If neither operation above restores the unit, clear all the memory by resetting it.
! Clearing all the memory (reset)
1
2
C
B D
E
TAPE 2
Press the ON/STAND-BY button to enter the power stand-by mode.
Whilst pressing down the CLOCK button and the EQUALIZER/X-BASS/DEMO
button, press the ON/STAND-BY button until "CLEAR AL" appears.
Playback head
Capstan
Pinch roller
Caution:
This operation will erase all data stored in memory including clock, timer settings,
tuner preset, and CD programme.
Erase head
Recording/Playback head
" After long use, the deck's heads and capstans may become magnetised, causing
poor sound. Demagnetise these parts once every 30 hours of playing/recording
time by using a commercial tape head demagnetiser. Read the demagnetiser's
instructions carefully before use.
! Before transporting the unit
! Cleaning the cabinet
On the back of this unit is equipped with a transport screw in order to prevent damage during transportation.
1 Press the ON/STAND-BY button to turn the
power on.
2 Press the CD button.
3 Press the OPEN/CLOSE button to open
the disc tray.
Remove all CDs inserted in the unit.
4 Press the OPEN/CLOSE button to close
the disc tray.
Make sure that "NO DISC" is displayed.
5 Press the ON/STAND-BY button to enter the
stand-by mode, and then unplug the AC
power lead from the wall socket.
6 Insert the transport screw into the back of
the unit and tighten it with a flat head screwdriver or a coin.
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then with a dry cloth.
Caution:
" Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet finish.
" Do not apply oil to the inside of the unit. It may cause
malfunctions.
E-27
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)3.fm
Specifications
As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
CD-XP200W
ENGLISH
! Tuner
Frequency range
FM: 88 - 108 MHz
AM: 531 - 1,602 kHz
! General
! Cassette deck
Power source
AC 110/127/220/230 - 240 V, 50/60 Hz
Power consumption
133 W
Frequency response
50 - 14,000 Hz (Normal tape)
Dimensions
Width: 270 mm (10-5/8")
Height: 330 mm (13")
Depth: 355 mm (13-15/16")
Signal/noise ratio
55 dB (TAPE 1, playback)
50 dB (TAPE 2, recording/playback)
Weight
7.4 kg (16.3 lbs.)
Wow and flutter
0.3 % (WRMS)
MPO: 240 W (120 W + 120 W) (10 % T.H.D.)
Type
5 cm (2") Tweeter
RMS: 150 W (75 W + 75 W) (10 % T.H.D.)
13 cm (5-1/8") Woofer
RMS: 104 W (52 W + 52 W) (0.9 % T.H.D.)
Output terminals
Speakers: 6 ohms
Headphones: 16 - 50 ohms (recommended: 32 ohms)
Input terminals
Video/Auxiliary (audio signal): 500 mV/47 k ohms
Microphone: 1 mV/600 ohms
! CD player
Type
3-disc multi-play compact disc player
Signal readout
Non-contact, 3-beam semiconductor laser pickup
D/A converter
1-bit D/A converter
Frequency response
20 - 20,000 Hz
Dynamic range
90 dB (1 kHz)
2-way type speaker system
Maximum input power
150 W
Rated input power
75 W
Impedance
6 ohms
Dimensions
Width: 220 mm (8-11/16")
Height: 330 mm (13")
Depth: 222 mm (8-6/8")
Weight
3.0 kg (6.6 lbs.)/each
- Specifications -
Output power
References
! Speaker
! Amplifier
E-28
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)3.fm
MEMO
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)_MEMO.fm
MEMO
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)_MEMO.fm
SHARP CORPORATION
9906
TINSZ0839AWZZ
02D R KS
02/4/2
Downloaded From Disc-Player.com Sharp Manuals
CD-XP200W(A)_BACK.fm
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement