Sensormatic Monochrome Video Multiplexer Specifications

Sensormatic Monochrome Video Multiplexer Specifications
Revise - Sec06 Video Transmission and Wireless.fm Page 1 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
NVT
./Transceivers;IP/17960
Transceivers;Passive/15207
Index1.Networking Systems//Video Products//Video Security Systems
Index 1.Networking Systems//Video Products//Video Security Systems
NV-EC1701 Ethernet/PoE over Coax EoC Transceiver
Single-channel Passive Transceivers
NVT
NVT
PR34829V2-263129.eps
FEATURES
• Transmit 10/100BASE-T full duplex Ethernet up to 2,500 ft. (750 m) over
RG-59 (or similar)
• Supports up to 60 Mbs of continuous effective bandwidth
• Powers PoE cameras (or other PoE devices), up to 45 watts
• One EoC transceiver at the network end can support up to four remote
transceivers/IP cameras using BNC "T" adapters
• Up to four EoC transceivers may be rack-mounted on a NV-RM8/10
• 48 V DC from one power supply is distributed over the coax to all
connected equipment
• Transparent network plug-and-play connectivity; no configuration or
setup required
• Supports all networking protocols (UDP, TCP/IP, HTTP, etc.)
• Advanced transmission and power technology with built-in transient protection
• Limited lifetime warranty
Anixter No. Vendor No.
Description
442049
NV-EC1701
Ethernet/PoE over Coax EoC Transceiver
442054
NV-EC1701-KIT1
1-camera kit
442055
NV-EC1701-KIT2
2-camera kit
442056
NV-EC1701-KIT3
3-camera kit
442057
NV-EC1701-KIT4
4-camera kit
The NVT models NV-208A-M and the NV-214A-M transceivers are passive
(non-amplified) devices, which allow the transmission of real-time analog video over
unshielded twisted-pair (UTP) telephone wire. "Up-the-Coax" telemetry signals are
supported when used with any other passive NVT model including NVT passive hubs.
FEATURES
• Single-channel passive transceiver with screwless UTP video-signal termination
• No power required, built-in transient protection, supports "Up-the-Coax" type
control signal up to 750 ft.
• Transmit with another passive NVT transceiver up to 750 ft.; transmit up to
3,000 ft. if used with an active receiver
• A-M = Male BNC; the NV-214A-M features a 9 in. mini-coax pigtail and
screwless UTP termination
• Limited lifetime warranty
Anixter No. Vendor No.
Description
322648
NV-208A-M
Single-channel passive video transceiver
(male BNC)
299547
NV-214A-M
Single-channel passive video transceiver
(mini-coax pigtail)
393096
NV-BKT214-8
Mounting bracket for NV-215J-M (8 each)
For digital-recording applications, it is recommended that
passive-to-passive transmission (Example: NV-214A-M) distances be
limited to no more than 750 ft. For distances greater than 750 ft., please
use an NVT Active Receiver product.
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.1
Video Transmission and Wireless
The NVT Model NV-EC1701 Ethernet/PoE over Coax EoC Transceiver is a compact
media converter that allows 10/100BASE-T Ethernet and PoE power to be transmitted
using coax cable. These EoC devices are typically used in legacy installations
where existing coax is redeployed as part of an upgrade to IP cameras. 48 V DC
Class 2 power is delivered to one transceiver, which distributes it to up to four remote
transceivers and their PoE cameras.
These transceivers are extremely simple to use, with no IP or MAC address
configuration required. Status LEDs indicate power and link connectivity/activity for
RJ45 and BNC ports.
The NV-EC1701 is backed by NVT's award-winning customer support and limited
lifetime warranty.
PR21687V2-125573.eps
Revise - Sec06 Video Transmission and Wireless.fm Page 2 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
NVT
existing cable plant. With built-in transient protection, damaging voltage-spike
problems are eliminated.
Receivers;Active/3042
Index1.Networking Systems//Video Products//Video Security Systems
Single-channel Active Video Receiver
NVT
PR2871V2-32081.eps
FEATURES
• Single-channel active transmitter with screw terminal video output termination
• Use with an NVT active receiver for distances up to one mile
• Built-in transient protection
• Three-position range switch; blue power LED, green video receive LED
• Limited lifetime warranty
Anixter No. Vendor No.
Description
234070
NV-653T
Single-channel active video transmitter
Video Transmission and Wireless
The NV-653T requires floating 24 V AC/DC; power supply not included.
The NVT model NV-652R Video Receiver is an active, amplified device that allows the
transmission of real-time monochrome or color video up to one mile using Category
5e unshielded twisted pair (UTP). Baseband (composite) signals of any type are
supported. The unparalleled interference rejection and low emissions of the Model
NV-652R allow long-run video signals to coexist in the same wire bundle as
telephone, datacom or low-voltage power circuits. This allows the use of a shared or
existing cable plant. Ground-lifting ensures no annoying "hum-bars" when ground
potential differences exist. With built-in transient protection, damaging voltage-spike
problems are eliminated.
FEATURES
• Single-channel active receiver with screw terminal video input termination
• Use with an NVT passive transceiver for distances up to 3,000 ft.
• Use with NV-653T transmitter for distances up to one mile
D
• Built-in transient
protection; built-in ground-lifting
• Built-in brightness and sharpness controls; blue power LED, green video
receive LED
• Limited lifetime warranty
Anixter No. Vendor No.
Description
234067
NV-652R
Active video receiver
The NV-652R requires floating 12-24 V AC/DC; power supply not included.
Transmitters;Active/3045
Index1.Networking Systems//Video Products//Video Security Systems
Single-channel Active Transmitter
NVT
PR2872V2-32082.eps
The NVT model NV-653T Video Transmitter is an active, amplified device that allows
the transmission of real-time monochrome or color video up to one mile using
Category 5e unshielded twisted pair (UTP). Baseband (composite) signals of any type
are supported. The unparalleled interference rejection and low emissions of the
model NV-653T allows long-run video signals to coexist in the same wire bundle as
telephone, datacom or low-voltage power circuits. This allows the use of a shared or
Transceivers;Passive/4105
Index 1.Networking Systems//Video Products//Video Security Systems
Passive 4-channel Video Transceiver
NVT
The NVT model NV-413A 4-channel Video Transceiver is a passive (non-amplified)
device that allows the transmission of real-time monochrome or color video over
Category 5e unshielded twisted pair (UTP). "Up-the-Coax"-type signal may be sent
over the same wire pair. When used as a receiver, the NV-413A is fully compatible
with qualified cameras that are equipped with an NVT twisted-pair output.
The unparalleled interference rejection and low emissions of the model NV-413A allow
video signals to coexist in the same wire bundle as telephone, datacom or low-voltage
power circuits. This allows the use of a shared or existing cable plant. With built-in
transient protection, damaging voltage-spike problems are eliminated. It can be used
as a passive transmitter or receiver.
FEATURES
• 4-channel passive transceiver with either RJ45 or screw-terminal
video termination
• Supports "Up-the-Coax" type control signal up to 750 ft.
• Distances up to 750 ft. when used with another passive transceiver
• Transmit up to 3,000 ft. with NVT active receivers
• No power required
• Built-in transient protection
• Two NV-413As may be rack mounted using the NV-RM8/10 rack panel kit (for
further information please contact your local sales office)
• Limited lifetime warranty
Anixter No. Vendor No.
Description
258752
NV-413A
Passive 4-channel video transceiver
Request the latest literature and guides from Anixter.
6.2
pr5951V2-14708.eps
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 3 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
NVT
Receivers;Active/4169
Index1.Networking Systems//Video Products//Video Security Systems
NV-452R 4-channel Active Receiver
NVT
pr5952V2-14711.eps
FEATURES
• 4-channel active receiver with RJ45 or screw terminal video input termination
• Distances up to 3,000 ft. when used with an NVT passive transceiver
• One mile when used with NV-653T transmitter
• Built-in transient protection and ground-lifting
• Built-in brightness and sharpness controls; blue power LED, green video
receive LED
• Two NV-452Rs may be rack-mounted using the NV-RM8/10 rack panel kit (for
further information please contact your local sales office)
• Limited lifetime warranty
Anixter No. Vendor No.
Description
299587
NV-452R
Active 4-channel receiver
The NV-452R requires floating 24 V AC/DC; power supply not included.
Transceivers;Passive/15209
Receivers;Active/15206
Index 1.Networking Systems//Video Products//Video Security Systems
DigitalEQ Active Receiver Hubs
NVT
The NVT models NV-872, NV-1672 and NV-3272 are 8-, 16- and 32-channel DigitalEQ
active receiver hubs that allow the transmission of real-time monochrome or color
video for distances up to one mile using Category 2 or better unshielded twisted-pair
(UTP) wire. The DigitalEQ active receiver hub continuously and automatically
compensates for cable attenuation, ground loops and wiring polarity, independent of
video-signal image.
FEATURES
• Per channel fully automatic digital signal distance equalization and
polarity correction
• Use with an NVT passive transceiver for distances up to 3,000 ft.
• Use with an NVT active transceiver for distances up to one mile
• Supports screw terminal or RJ45 UTP video inputs
• RJ45 video connectivity with optional NV-RJ45A RJ45 to-screw-terminal
adapters included
• Includes eight, 16 or 32 2 ft. coax jumper cables, NV-RJ45 adapters and
rack-mount hardware
• Built-in transient protection and ground-lifting
• Limited lifetime warranty
Index1.Networking Systems//Video Products//Video Security Systems
NV-872 DIGITALEQ ACTIVE DA HUB
Passive Video Transceiver Stub Hubs
NVT
PR21684V2-125575.eps
PR21689V2-125581.eps
The NVT models NV-813S, NV1613S and NV-3213S are 8-, 16- and 32-channel passive
transceiver stub hubs that allow transmission of real-time monochrome or color
video over unshielded twisted-pair (UTP) telephone wire. Baseband (composite)
signals of any type are twisted-pair supported.
- 8-channel active receiver DigitalEQ receiver DA Hub supports either screw terminal
or RJ45 UTP video inputs
- Four distribution amplifier video outputs per input channel
- One mile when used with NV-653T transmitter
- High-density 19 in. 1U high enclosure features eight input channels
- Includes eight 2 ft. coax jumper cables, rack-mount hardware and two screw
terminal adapters (NV-RJ45A)
Anixter No.
361242
Vendor No.
NV-872
Description
8-channel DigitalEQ active receiver
DA hub
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.3
Video Transmission and Wireless
The NVT model NV-452R 4-channel Active Receiver is an active (amplified) device that
allows the transmission of real-time monochrome or color video on up to one mile
using Category 5e unshielded twisted pair (UTP). The unparalleled interference
rejection and low emissions of the model NV-452R allow long-run video signals to
coexist in the same wire bundle as telephone, datacom or low-voltage power circuits.
This allows the use of a shared or existing cable plant. Ground-lifting ensures no
annoying "hum-bars" when ground potential differences exist. With built-in transient
protection, damaging voltage-spike problems are eliminated.
FEATURES
• 19 in. wide, 1U high, less than 2 in. deep
• Supports RJ45 or screw terminal video termination
• Use with another passive transceiver for distances up to 750 ft.
• Use with an NVT active receiver for distances up to 3,000 ft.
• No power required
• Built-in transient protection
• Supports "Up-the-Coax"-type control signal up to 750 ft.
• Includes rack-mount hardware and screw terminal adapters (RJ45A)
• Limited lifetime warranty
Anixter No. Vendor No.
Description
363025
NV-813S
8-channel passive transceiver stub hub
363174
NV-1613S
16-channel passive transceiver stub hub
363028
NV-3213S
32-channel passive transceiver stub hub
Revise - Sec06 Video Transmission and Wireless.fm Page 4 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
NVT
NV-1672 DIGITALEQ ACTIVE DA HUB
PR21685V2-125560.eps
- 16-channel active receiver DigitalEQ receiver DA hub supports either screw
terminal or RJ45 UTP video inputs
- Two distribution amplifier video outputs per input channel
- One mile when used with NV-653T transmitter
- High-density 19 in. 1U high enclosure features 16 input channels
- Includes (16) 2 ft. coax jumper cables, rack-mount hardware and four screw
terminal adapters (NV-RJ45A)
Video Transmission and Wireless
Anixter No.
362795
Vendor No.
NV-1672
NV-3272 DIGITALEQ ACTIVE HUB
Description
16-channel DigitalEQ active receiver
DA hub
PR21686V2-125561.eps
D
- 32-channel active receiver DigitalEQ receiver hub supports either screw terminal or
RJ45 UTP video inputs
- One video output per channel -One mile when used with NV-653T transmitter
- High-density 19 in. 1U high enclosure features 32 input and output video channels
- Includes (32) 2 ft. coax jumper cables, rack-mount hardware and eight screw
terminal adapters (NV-RJ45A)
Anixter No.
362797
Vendor No.
NV-3272
Description
32-channel DigitalEQ active receiver hub
FEATURES
• Adaptive StubEQ fully automatic two-band equalization provides
adjustment-free equalization every time
• Individually floating 1 A or 0.5 A 28 V AC outputs
• The NV-842, NV-1642 and the NV-3242 are rack mountable and include
mounting hardware
• The NV-442 is rack mountable when used with the NV-RM-8/10
• Has a 1.8 in. depth, 11.5 in. 1U high enclosure
• Full-motion CCTV video at distances up to 1,500 ft. when used with any passive
NVT transceiver or hub; 2,000 ft. when used with the NV-653T active transmitter
• RJ45 connectivity with optional NV-RJ45A RJ45-to-screw-terminal
adapters (included)
• Exceptional interference rejection
• Built-in transient protection and ground-lifting
• Compatible with qualified UTP cameras
• Limited lifetime warranty
NV-442 STUBEQ ACTIVE RECEIVER
- 4-channel StubEQ active receiver hub supports either screw terminal or RJ45 UTP
video inputs; 1,500 ft. when used with a passive transceiver at the camera;
2,000 ft. when used with NV-653T transmitter
- Shallow 1.85 in. deep, 11.5 in. 1U high enclosure features four input channels
- Includes one screw terminal adapter (NV-RJ45A)
Anixter No. Vendor No.
Description
422124
NV-442
4-channel StubEQ active receiver hub
NV-842 STUBEQ ACTIVE RECEIVER HUB
- 8-channel StubEQ active receiver hub supports either screw terminal or RJ45 UTP
video inputs; 1,500 ft. when used with a passive transceiver at the camera;
2,000 ft. when used with NV-653T transmitter
- Shallow 1.85 in. deep, 19 in. 1U high enclosure features eight input channels
- Includes eight rack-mount hardware and two screw terminal adapters (NV-RJ45A)
Anixter No. Vendor No.
Description
393005
NV-842
8-channel StubEQ active receiver hub
NV-1642 STUBEQ ACTIVE RECEIVER HUB
PR23573V2-165902.eps
Receivers;Active/15992
Index1.Networking Systems//Video Products//Video Security Systems
StubEQ Active Receiver Hubs
NVT
PR23572V2-165906.eps
- 16-channel StubEQ active receiver hub supports either screw terminal or RJ45 UTP
video inputs; 1,500 ft. when used with a passive transceiver at the camera;
2,000 ft. when used with NV-653T transmitter
- Shallow 1.85 in. deep, 19 in. 1U high enclosure features eight input channels
- Includes eight rack-mount hardware and two screw terminal adapters (NV-RJ45A)
The NVT models NV-442, NV-842, NV-1642 and NV-3242 are 4-, 8-, 16- and
32-channel products that employ NVT's latest generation StubEQ technology that
allows the transmission of fiber-like analog video for distances up to 2,000 ft. using
Category 2 or better unshielded twisted-pair (UTP) wire. The receiver hub
continuously and automatically conditions the video signal, compensating for cable
attenuation, ground loops and voltage transients, independent of
video-signal content.
Anixter No.
393052
Vendor No.
NV-1642
Description
16-channel StubEQ active receiver hub
Request the latest literature and guides from Anixter.
6.4
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 5 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
NVT
NV-3242 STUBEQ ACTIVE RECEIVER HUB
PR23574V2-165908.eps
Transceivers;Passive/12705
Index 1.Networking Systems//Video Products//Video Security Systems
Passive Single-channel Power-Video-Data Transceiver
NVT
- 32-channel StubEQ active receiver receiver hub supports either screw terminal or
RJ45 UTP video inputs; 1,500 ft. when used with a passive transceiver at the
camera, 2,000 ft. when used with NV-653T transmitter
- Shallow 1.85 in. deep, 19 in. 1U high enclosure features eight input channels
- Includes eight rack-mount hardware and two screw terminal adapters (NV-RJ45A)
Anixter No.
393053
Vendor No.
NV-3242
Description
32-channel StubEQ active receiver hub
Transceivers;Passive/14212
Passive Single-channel Power-Video Transceiver
NVT
PR13606V2-31158.eps
The NVT model NV-216A-PV Power-Video Transceiver with power is a passive
(non-amplified) device that allows the transmission of real-time monochrome or
color video over Category 5e unshielded twisted pair (UTP). Baseband (composite)
signals of any type are supported.
FEATURES
• Single-channel Power-Video transceiver with RJ45 and BNC
• Power-Video (PVD) signals are routed via UTP and RJ45 or screwless terminal
block for organized pass-through of inputs/outputs
• Mini-coax pigtail supports in-camera mounting in most dome cameras
• Use with NVT's PVD Power Supply Hubs and Cable Integrators
• Up to 3,000 ft. with an NVT active receiver or hub
• Supports "Up-the-Coax"-type control signal up to 750 ft. when used with a
passive transceiver
• Exceptional interference rejection (built-in transient protection)
• Limited lifetime warranty
Anixter No. Vendor No.
Description
323644
NV-216A-PV
Single-channel Power-Video transceiver
The NVT model NV-218A-PVD Power-Video-Data Transceiver is a passive
(non-amplified) device that allows the transmission of real-time monochrome or
color video over Category 5e unshielded twisted pair (UTP). Baseband (composite)
signals of any type are supported.
FEATURES
• Single-channel Power-Video-Data transceiver with RJ45, BNC and screwless
terminal inputs
• Power-Video-Data (PVD) signals are routed via UTP and RJ45 or screwless
terminal block for organized pass-through of inputs/outputs
• Mini-coax pigtail supports in-camera mounting in most dome cameras
• Use with NVT's PVD Power Supply Hubs and Cable Integrators
• Up to 3,000 ft. with an NVT active receiver or hub
• Supports "Up-the-Coax"-type control signal up to 750 ft. when used with a
passive transceiver
• Exceptional interference rejection (built-in transient protection)
• Limited lifetime warranty
Anixter No. Vendor No.
Description
299548
NV-218A-PVD
Single-channel
Power-Video-Data transceiver
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.5
Video Transmission and Wireless
Index1.Networking Systems//Video Products//Video Security Systems
PR14892V2-32077.eps
Revise - Sec06 Video Transmission and Wireless.fm Page 6 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
NVT
Transmitters;Passive/15211
Index1.Networking Systems//Video Products//Video Security Systems
Single-channel Video Transmitter and 12 V DC Converter
Video Transmission and Wireless
NVT
PR21691V2-125583.eps
The NVT model NV-226J-PV Video Transmitter and 12 V DC Converter is a passive
(non-amplified) video transmitter combined with a 24 AC-to-12 V DC converter.
Designed to fit on the back of a fixed 12 V DC camera, this unit is architected to
convert 24 V AC power from the control room, while delivering real-time baseband
(composite) video at extended distances, all over one 4-pair UTP cable.
FEATURES
• Extended camera power and video (distance) routed through UTP and RJ45
• Supports 12 V DC cameras with onboard regulated power
• Use with NVT's PVD Power Supply Hubs and Cable Integrators
• Video up to 3,000 ft. with NVT's Active Receiver Hubs
• Video up to 750 ft. with NVT's Passive Receiver Hubs
• Supports "Up-the-Coax"-type control signals up to 750 ft.
• Exceptional interference rejection
D
• Built-in transient
protection
• Limited lifetime warranty
Anixter No. Vendor No.
Description
363158
NV-226J-PV
Passive video transmitter with a
24 AC-to-12 V DC converter
Power Supplies;Video/14213
Index1.Networking Systems//Video Products//Video Security Systems
PVD Power Supply Hubs
NVT
PR13607V2-31167.eps
The NVT models NV-4PS10-PVD and NV-16PS10-PVD are multichannel power supply
integrator hubs which combine a one amp/channel power supply with pass-through
video and telemetry data, for up to four and 16 cameras respectively, all over UTP
wire. Designed for installation in the wiring/IDF telecom closet, or at the control/MDF
room, they consolidate connectivity via standard 4-pair RJ45 EIA/TIA 568B-compliant
premises wiring and pin-outs.
FEATURES
• Provides Class 2 SELV camera power, pass-through video and telemetry data
connection from four to 16 cameras, each via a single RJ45 4-pair UTP cable
• Standard telecom/datacom structured cabling pin-outs per EIA/TIA 568B
• Independently selectable 24 or 28 V AC with one amp max . per channel
• Automatic-reset fault protection, transient protection
• Individually floating outputs ensure total ground-loop immunity
• Use with the NV-216PV, NV-218-PVD or the NV-226J-PV transceiver at the
camera and passive or active receivers at the control room
• Power cameras via UTP over significant distances
• 1U high; 12 in. deep; wall, desk or rack mountable
• Limited lifetime warranty
Anixter No. Vendor No.
Description
362817
NV-4PS10-PVD
4-channel power supply cable
integrator hub
341355
NV-16PS10-PVD
16-channel power supply cable
integrator hub
393093
NV-4PSRMBK
Rack panel kit for 4-port power
supply products
Receivers;Powered/14214
Index 1.Networking Systems//Video Products//Video Security Systems
Multichannel Power Supply Passive Receiver Hubs
NVT
The NVT models NV-4PS13-PVD NV-8PS13-PVD and NV-16PS13-PVD are 4-, 8- and
16-channel hybrid power supply and passive receiver hubs. Designed for installation
in the MDF/equipment room, these hubs have independently selectable 24 V
AC-OFF-28 V AC outputs that can support channel at-distance camera loads up to one
amp per channel.
FEATURES
• Provides Class 2 SELV camera power, pass-through video and telemetry data
connection from eight to 16 cameras, each via a single RJ45 4-pair UTP cable
• Standard telecom/datacom structured cabling pin-outs per EIA/TIA 568B
• Independently selectable 24 or 28 V A C with one amp max. per channel
(10 amp aggregate)
• Automatic reset fault protection and built-in transient protection
• Individually floating outputs ensure total ground loop immunity
• Diagnostic LEDs show load/no load, mis-wires and overload conditions
• Use with the NV-216PV, NV-218-PVD or the NV-226J-PV transceiver at the
camera and passive or active receivers at the control room
• Power cameras via UTP over significant distances
• 1U high; 12 in. deep: wall-, desk- or rack-mountable
• Limited lifetime warranty
Anixter No. Vendor No.
Description
369845
NV-4PS13-PVD
4-channel power supply passive
receiver hub
341356
NV-8PS13-PVD
8-channel power supply passive
receiver hub
Request the latest literature and guides from Anixter.
6.6
PR21692V2-125568.eps
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 7 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
NVT
Anixter No.
341357
Vendor No.
NV-16PS13-PVD
393093
NV-4PSRMBK
Description
16-channel power supply passive
receiver hub
Rack panel kit for 4-port power
supply products
Transceivers;Video Powered/11880
Index1.Networking Systems//Video Products//Video Security Systems
Power-Video-Data Integrators
NVT
PR10283V2-25118.eps
support up to two 4-channel devices, such as NV-413A, NV-452R or NV-704J-PVD.
The NV-RM8/10 can reside on front or rear rails of the same rack as NVT hubs,
multiplexers, DVRs or encoders. This heavy-gauge panel is designed to withstand the
mechanical load of multiple coax cables. Threaded holes and screws (included)
provide easy product mounting and installation into a 19 in. rack.
FEATURES
• Supports up to 10 individual or two 4-channel models
• Mounting hardware included
• Standard 19 in. wide, 2U high
• Limited lifetime warranty
Anixter No. Vendor No.
Description
368529
NV-RM8/10
Rack panel kit
Transceivers;Passive/17323
Index 1.Networking Systems//Video Products//Video Security Systems
Single-channel Passive Transceivers
NVT
PR28649V2-210284.eps
FEATURES
• The NV-704J-PVD and NV-716J-PVD receive low-voltage camera power from any
third-party Class 2 power supply
• Control room connections are achieved with a single 4-pair RJ45 cable
(Exception: Two cables are required when all four cameras are in use and one or
more require data.)
• Control room connections may be made using the NV-413A, NV-452R, and any
passive or active NVT hub
• All equipment employs industry-standard TIA/EIA-568-B pin-outs
Anixter No. Vendor No.
Description
299588
NV-704J-PVD
4-channel power-video-data
cable integrator
299589
NV-716J-PVD
16-channel power-video-data
cable integrator
Transceivers;Rack-mounting/15210
Index1.Networking Systems//Video Products//Video Security Systems
Rack Panel Kit
NVT
PR21690V2-125566.eps
The NVT models NV-215J-M (RJ45) and the NV-217J-M (RJ45) transceivers are
passive (non-amplified) devices, which allow the transmission of real-time analog
video over unshielded twisted-pair (UTP) telephone wire. "Up-the-Coax" telemetry
signals are supported when used with any other passive NVT model including NVT
passive hubs.
FEATURES
• Single-channel passive transceiver with RJ45 video-signal terminal
• No power required, built-in transient protection, supports "Up-the-Coax" type
control signal up to 750 ft.
• Transmit with another passive NVT transceiver up to 750 ft.; transmit up to
3,000 ft. if used with an DigitalEQ active receiver
• A-M = Male BNC; the NV-215J-M features a 9 in. mini-coax pigtail
• Limited lifetime warranty
Anixter No. Vendor No.
Description
422119
NV-215J-M
Single-channel passive video transceiver
(RJ45/male BNC with BNC with
mini-coax pigtail)
422120
NV-217J-M
Single-channel passive video transceiver
(RJ45/male BNC)
For high-resolution applications, it is recommended that passive-to-passive
transmission distances be limited to no more than 750 ft. For distances
greater than 500 ft. always use an NVT active-receiver product.
The NV-RM8/10 Rack Panel Kit allows for the rack mounting of up to
10 single-channel transceivers, such as NV-652R or NV-653T. Alternately, it can
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.7
Video Transmission and Wireless
Typically installed in the Wiring Closet or IDF room, the NV-704J-PVD and
NV-716J-PVD are passive pass-through wiring devices that efficiently consolidate
camera power, video and pan/tilt/zoom data onto a minimum of 4-pair UTP
RJ45 cable. Power, video and data are converted at the camera using the
NV-218A-PVD or NV-216A-PV transceivers (power and video) which utilize a single
4-pair cable with RJ45 connectors to deliver each camera's signal.
Revise - Sec06 Video Transmission and Wireless.fm Page 8 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
NVT
Receivers;Powered/17324
Index1.Networking Systems//Video Products//Video Security Systems
Power Supply StubEQ Active Receiver Hubs
Video Transmission and Wireless
NVT
PR28650V2-210281.eps
Available in 8, 16, or 32 channels in 1U rack-mount configurations. The
NV-8PS42-PVD and the NV-16PS42-PVD deliver up to 1 amp of individually floating
camera power and two video outputs per channel. The NV-32PS42-PVD model
provides five amps per channel and one video output per channel. They offer
plug-and-play analog camera power and connectivity at twice the distance of
RG-59/U, and five times the distance of PoE Ethernet.
These hubs represent the culmination of years of NVT development, providing
all-in-one delivery of camera power, auto-equalized video, and P/T/Z telemetry data,
all over extended distances of 4-pair Cat 5 or Cat 6 wire. Using future-proof UTP-based
EIA/TIA 568B structured building wiring, these hubs are designed for a fast
labor-saving installation. Depending on camera current, distances up to 1,500 feet
(450 m) are supported.
FEATURES
D
• Fully integrated multichannel floating (isolated) power supplies which ensure
total ground-loop immunity
• Provides 28 V AC camera power while receiving fully equalized video
transmission and delivering P/T/Z telemetry all over a single 4-pair Cat 5e cable
Anixter No. Vendor No.
Description
422121
NV-8PS42-PVD
8-channel power supply StubEQ receiver
hub (one amp/channel,
2 video outputs/channel)
422122
NV-16PS42-PVD
16-channel power supply StubEQ receiver
hub (one amp/channel,
2 video outputs/channel)
422123
NV-32PS42-PVD
32-channel power supply StubEQ receiver
hub (0.5 amp/channel)
using coax cable. These EoC devices are typically used in legacy installations where
existing coax is redeployed as part of an upgrade to IP cameras. 48 V DC Class
2 power is delivered to one transceiver, which distributes it to up to four remote
transceivers and their PoE cameras. These transceivers are extremely simple to use,
with no IP or MAC address configuration required. Status LEDs indicate power and
link connectivity/activity for RJ45 and BNC ports. The NV-EC1701 is backed by NVT's
award-winning customer support and limited lifetime warranty.
FEATURES
• Transmit 10/100BASE-T full duplex Ethernet up to 2,500 ft. (750 m) over
RG-59 (or similar)
• Supports up to 60 Mbs of continuous effective bandwidth
• Powers PoE cameras (or other PoE devices), up to 45 watts
• One EoC transceiver at the network end can support up to four remote
transceivers/IP cameras using BNC "T" adapters
• Up to four EoC transceivers may be rack-mounted on a NV-RM8/10
• 48 V DC from one power supply is distributed over the coax to all
connected equipment
• Transparent network "plug-and-play" connectivity; no configuration or
setup required
• Supports all networking protocols (UDP, TCP/IP, HTTP, etc.)
• Advanced transmission and power technology with built-in transient protection
• Limited lifetime warranty
Anixter No. Vendor No.
Description
442049
NV-EC1701
Ethernet/PoE over Coax EoC Transceiver
442054
NV-EC1701-KIT1
1-camera kit
442055
NV-EC1701-KIT2
2-camera kit
442056
NV-EC1701-KIT3
3-camera kit
442057
NV-EC1701-KIT4
4-camera kit
Transceivers;IP/17960
Index1.Networking Systems//Video Products//Video Security Systems
NV-EC1701 Ethernet/PoE over Coax EoC Transceiver
NVT
PR34829V2-263129.eps
The NVT Model NV-EC1701 Ethernet/PoE over Coax EoC Transceiver is a compact
media converter that allows 10/100BASE-T Ethernet and PoE power to be transmitted
Request the latest literature and guides from Anixter.
6.8
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 9 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
IFS
./Fiber;Video Multiplexer/3419
Index1.Networking Systems//Video Products//Video Security Systems
Video Multiplexers
IFS
PR7939V2-12356.eps
2-CHANNEL DIGITAL MULTIPLEXER, CHOOSE FROM SM OR MM TRANSMISSION OVER
A SINGLE FIBER
Anixter No. Vendor No.
Description
243517
VT7220
MM, transmitter
243518
VT7230
SM, transmitter
304104
VT7220-R3
MM, transmitter rack-mount
254994
VT7230-R3
SM, transmitter rack-mount
243519
VR7220
MM, receiver
304013
VR7220-R3
MM, receiver rack-mount
243520
VR7230
SM, receiver
254996
VR7230-R3
SM, receiver rack-mount
4-CHANNEL DIGITAL MULTIPLEXER, SM OR MM
Anixter No. Vendor No.
Description
243525
VT7420
4-channel digital video transmitter,
multimode laser, requires 1F
304116
VT7420-R3
MM, 4-channel transmitter,
1F, rack-mounted
252242
VT7430-R3
SM, transmitter, 1300 nm laser,
1F, rack-mount
243526
VR7420
MM, receiver, 1300 nm, 1F
272167
VR7420-R3
MM, receiver, 1300 nm, 1F, rack-mount
243529
VR7430
SM, receiver, 1300 nm laser, 1F
254102
VR7430-R3
SM, receiver, 1300 nm laser,
1F, rack-mount
8-CHANNEL DIGITAL MULTIPLEXER, SM OR MM TRANSMISSION OVER A
SINGLE FIBER
Anixter No. Vendor No.
Description
243537
VT7820
MM, transmitter, 1300 nm, 1F
304121
VT7820-R3
MM, transmitter, 1300 nm, 1F, rack-mount
240380
VT7830
SM, transmitter, 1300 nm laser, 1F
304123
VT7830-R3
SM, transmitter, 1300 nm laser,
1F, rack-mounted
243538
VR7820
MM, receiver, 1300 nm, 1F
393836
VR7820-R3
MM, receiver, 1300 nm, 1F, rack-mount
240385
VR7830
SM, receiver, 1300 nm laser, 1F
304028
VR7830-R3
SM, receiver, 1300 nm laser,
1F, rack-mount
8-CHANNEL DIGITAL MULTIPLEXER, SM, 2 BI-DIRECTIONAL DATA VIA RS-232,
RS-422, RS-485, TWO- OR FOUR-WIRE
Anixter No. Vendor No.
Description
304119
VT7820-2DRDT
MM, transmitter
304025
VR7820-2DRDT
MM, receiver
243539
VT7830-2DRDT
SM, transmitter
243540
VR7830-2DRDT
SM, receiver
16-CHANNEL DIGITAL MULTIPLEXER, SM OR MM TRANSMISSION OVER A
SINGLE FIBER
Anixter No. Vendor No.
Description
243541
VT71620-R3
MM, transmitter, 1300/1550 nm,
1F, rack-mount
243542
VR716020-R3
MM, receiver, 1300/1550 nm,
1F, rack-mounted
243543
VT71630-R3
SM, transmitter, 1300/1550 nm,
1F, rack-mounted
243544
VR71630-R3
SM, receiver, 1300/1550 nm,
1F, rack-mount
RACK-MOUNT CARD CAGE
Anixter No. Vendor No.
243589
R3
243590
R3-230
243591
R3-BP
Description
19 in. rack, 115 V AC input (includes
power supply)
19 in. rack-mount card cage, 14 slots,
230 V AC input
Blank panel for R3 card cage (1 in.)
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.9
Video Transmission and Wireless
IFS offers a complete line of analog and digital video multiplexers - from 2 channels
to 32 channels of video. In addition, they provide a multitude of multiplexers that
combine video/data and video/audio.
Options: PS-12VDC 12-volt DC plug-in power supply (included).
PS-12VDC-230 12-volt DC plug-in power supply, 230 V AC input (included if specified
at time of order). Add '-R3' to model number for R3 Rack-Mount - no charge. (Requires
R3 rack purchased separately.) Add 'C' for conformally coated printed circuit boards.
Consult your salesperson.
FEATURES
• Choice of analog FM or digital transmission
• 10 MHz bandwidth per channel
• No in-field adjustments
• Power and signal status LEDs to monitor system performance
• Real-time color transmission
• Wide operating ambient temperature range (-40° to 74°C)
• Lifetime warranty
4-CHANNEL DIGITAL MULTIPLEXER, SINGLE-MODE WITH 2 BI-DIRECTIONAL DATA VIA
RS-232, RS-422, RS-485, TWO- OR FOUR-WIRE
Anixter No. Vendor No.
Description
279049
VR7420-2DRDT
MM, receiver
279048
VT7420-2DRDT
MM, transmitter
270738
VR7430-2DRDT
SM, receiver
271961
VT7430-2DRDT
SM, transmitter
Revise - Sec06 Video Transmission and Wireless.fm Page 10 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
IFS
Fiber;Video System/3415
Fiber;Contact Closure, Module/3649
Index1.Networking Systems//Video Products//Video Security Systems
Index 1.Networking Systems//Video Products//Video Security Systems
Video Transmission
Video Transmission and Wireless
IFS
Contact Closure Transmission
PR7935V2-12347.eps
The IFS FiberPak Videolinks Kit includes everything you need to transmit a CCTV signal
(either fixed or PTZ) on one multimode optical fiber. FiberPaks are available in five
models compatible with Bosch, Javelin, Kalatel, Panasonic, Pelco, Sensormatic AD,
Vicon, Videolarm and other CCTV manufacturers.
The FiberPak Kit includes: transmitter and receiver; power supplies; installation and
operation manuals; lifetime warranty.
Note: Single-mode and rack-mount versions of these products are available separately
to meet your system-configuration needs.
FEATURES
• No in-field adjustments
• Full-range Automatic Gain Control (AGC)
• Automatic resettable fuses on all power lines
• Transparent data
D encoding/compatible with major data protocols
• Power and AGC status LEDs to monitor system performance
• Wide operating ambient temperature range (-40° to +74°C)
Anixter No. Vendor No.
Description
243512
FP1101
MM, 850 nm, 1F, fixed video
240399
FP1500WDM
MM, 850/1300 nm, 1F, video with
one-way data
243513
FP1505WDM
MM, 850/1300 nm, 1F, video with
up-the-coax data
243514
FP1910WDM
MM, 850/1300 nm, 1F, video with
bi-directional data
303850
FP6010
MM, 4-channel video transmission kit, 1F
IFS
PR14890V2-31948.eps
IFS offers a line of equipment that allows up to eight contact closure transmissions
over one optical fiber or Ethernet. For alarm event-triggering, building HVAC, fire BA
access control, lane/gate control.
FEATURES
• No in-field adjustments
• Relay contact rating: 200 V DC, 0.5 amps, normally open
• Wide operating ambient temperature range (-40° to +74°C)
• Lifetime warranty
TRANSMITTERS
Anixter No.
332765
341453
341454
347820
Vendor No.
DT3010
DT3025
DT3030
DT3010-R3
393855
DT3025-R3
393856
DT3030-R3
359514
359515
DECT3000
DECT3020
359517
DECT3030
RECEIVERS
Anixter No.
332766
342971
341456
393857
341457
393859
341455
303827
Vendor No.
DR3010
DR3010-R3
DR3020
DR3020-R3
DR3025
DR3025-R3
DR3030
DR3030-R3
359519
DECR3000
Description
MM, transmitter, 850 nm, 1F
SM, transmitter, 1300 nm, 1F
SM/MM, transmitter, 1300 nm, 1F
MM, transmitter, 850 nm,
1F, rack-mounted
SM, transmitter, 1300 nm,
1F, rack-mounted
SM/MM, transmitter, 1300 nm,
1F, rack-mounted
Ethernet converter 10/100
MM, transmitter, contact closure to
Ethernet, 2F
SM, transmitter, contact closure to
Ethernet, 2F
Description
MM, receiver, 850 nm, 1F
MM, receiver, 850 nm, 1F, rack-mounted
MM, receiver, 1300 nm, 1F
MM, receiver, 1300 nm, 1F, rack-mounted
SM, receiver, 1300 nm, 1F
SM, receiver, 1300 nm, 1F, rack-mounted
SM/MM, receiver, 1300 nm, 1F
SM/MM, receiver, 1300 nm, 1F,
rack mounted
8-channel contact closure to Ethernet Rx,
10/100TX electrical
Request the latest literature and guides from Anixter.
6.10
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 11 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
IFS
Anixter No.
359520
Vendor No.
DECR3020
359522
DECR3030
Description
8-channel contact closure to Ethernet Rx,
100FX MM
8-channel contact closure to Ethernet Rx,
100FX SM
Fiber;Control Module/3414
RS-485 (FOUR-WIRE) POINT-TO-POINT TRANSCEIVERS
Anixter No. Vendor No.
Description
243559
D1315
MM, 850 nm, 2F
303722
D1315WDMA
MM, 850/1300 nm, 1F (side A)
303724
D1315WDMB
MM, 1300/850 nm, 1F (side B)
243560
D1315-SM
SM, 1300 nm, 2F
Index1.Networking Systems//Video Products//Video Security Systems
Data Transmission
IFS
PR7929V2-12329.eps
RS-485 (FOUR-WIRE) DROP-AND-REPEAT TRANSCEIVERS
Anixter No. Vendor No.
Description
243561
D2315
MM, 850 nm, 2F
243562
D2315-SM
SM, 1300 nm, 2F
303759
D2315WDM
MM, 850/1300 nm, 1F
SELF-HEALING RING DATA TRANSCEIVER. (RS-232/422, RS-485,
TWO- OR FOUR-WIRE)
Anixter No. Vendor No.
Description
243566
D19130SHR
SM, 1300 nm, 2F
RS-232/422 POINT-TO-POINT TRANSCEIVERS
Anixter No. Vendor No.
Description
243547
D1010
MM, 850 nm, 2F
272171
D1010WDMA
MM, 850/1300 nm, 1F (side A)
303702
D1010WDMB
MM, 1300/850 nm 1F (side B)
243548
D1020
MM, 1300 nm, 2F
243549
D1025
SM, 1300 nm, 2F
303704
D1030
SM, 1300 nm, 2F
303706
D1030WDMA
SM, 1300 nm 1F (side A)
303708
D1030WDMB
SM, 1500 nm 1F (side B)
303753
D2300WDM
MM, 850/1300 nm, 1F
303808
D9130WDM-R3
SM, 1300 nm, 1F, rack-mount
RS-232/422 DROP-AND-REPEAT TRANSCEIVERS
Anixter No. Vendor No.
Description
243551
D2100
MM, 850 nm, 2F
303743
D2100WDM
MM, 850/1300 nm, 1F
243552
D2120
MM, 1300 nm, 2F
243553
D2130
SM, 1300 nm, 2F
Video Transmission and Wireless
IFS offers a complete line of analog and digital data transmission products for
RS-232; RS-422; and RS-485 (two-wire or four-wire) serial data. These modules can
be used to design point-to-point, drop-and-repeat and self-healing ring data network
topologies. Wide operating ambient temperature range (-40° to +74°C).
DROP-AND-REPEAT POLL AND RESPOND TRAFFIC SIGNAL NETWORKS
Anixter No. Vendor No.
Description
396385
D19130
SM, 1300 nm, 2F
396386
D19130-R3
SM, 1300 nm, 2F rack-mount
396387
D19130WDM
SM, 1300 nm, 1F
303808
D9130WDM-R3
SM, 1300 nm, 1F, rack-mount
UNIVERSAL DATA TO ETHERNET BI-DIRECTIONAL DATA TRANSCEIVERS
Anixter No. Vendor No.
Description
359509
DED2500-E
Serial to Ethernet media converter,
10/100TX, Electrical
359510
DED2500-M
Serial to Ethernet media converter,
100FX MM
359512
DED2500-S
Serial to Ethernet media converter,
100FX SM
DROP AND REPEAT POLL AND RESPOND TRAFFIC SIGNAL NETWORKS
Anixter No. Vendor No.
Description
303806
D9130-R3
SM, 1300 nm, 2F
303808
D9130WDM-R3
SM, 1300 nm, 1F, rack-mount
RS-485 (TWO-WIRE) POINT-TO-POINT TRANSCEIVERS
Anixter No. Vendor No.
Description
243554
D1300
MM, 850 nm, 2F
243556
D1325
SM, 1300 nm, 2F
RS-485 (TWO-WIRE) DROP-AND-REPEAT TRANSCEIVERS
Anixter No. Vendor No.
Description
240395
D2300
MM, 850 nm, 2F
243558
D2325
SM, 1300 nm, 2F
303753
D2300WDM
MM, 850/1300 nm, 1F
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.11
Revise - Sec06 Video Transmission and Wireless.fm Page 12 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
IFS
Fiber;Data Multiplexer/15010
Index1.Networking Systems//Video Products//Video Security Systems
Full Duplex Data Multiplexer
IFS
PR21459V2-121578.eps
Anixter No.
303781
Vendor No.
D8030WDMA-R3
303783
D8030WDMB-R3
Description
8-channel transceiver single-mode,
1 fiber, "A" end rack-mount
8-channel transceiver single-mode,
1 fiber, "A" end rack-mount
Fiber;Transceivers, Ethernet/76
Index 1.Networking Systems//Video Products//Video Security Systems
IFS Hardened 10/100 Media Converters
Video Transmission and Wireless
IFS
The IFS D8000 Series is a fully digital data multiplexer that supports up to eight
channels of full-duplex data on one optical fiber, and is ideal for those applications
where the available fiber count may be limited or additional data channels must be
added to an existing optical cable plant. These environmentally hardened data
multiplexers are designed for use in unconditioned out-of-plant or roadside
installations. Any of the eight available data channels may be independently
configured for either RS-232, RS-422 or RS-485 (2- or 4-wire) operation, providing a
high level of versatility. Plug-and-play design ensures ease of installation and no
electrical or optical adjustments are ever required. LED status indicators are
provided for rapidly ascertaining equipment-operating status, and these units are
available in either stand-alone or rack-mount configurations.
FEATURES
• Supports up to eight channels of full-duplex RS-232, RS-422, and RS-485
D
(two- or four-wire)
data on one or two fibers
• Environmentally hardened design assures extremely high reliability in
unconditioned roadside or out-of-plant environments
• Transparent to data encoding
• Automatic resettable solid-state current limiters
• Data rates up to 115 kbps
• No in-field electrical or optical adjustments required
• Integrated WDM for greater product reliability
• Tested and certified by an independent testing laboratory for full compliance
with the environmental requirements (ambient operating temperature,
mechanical shock, vibration, humidity with condensation, high-line/low-line
voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the
Caltrans Specification for Traffic Signal Control Equipment
• Operating power, transmit and receive data, TDM lock and optical carrier detect
LED status indicators
• Hot-swappable rack modules
• Distances up to 37 miles (60 km)
• Lifetime warranty
Anixter No. Vendor No.
Description
303776
D8020WDMA
8-channel transceiver multimode, 1 fiber,
"A" end
303778
D8020WDMB
8-channel transceiver multimode, 1 fiber,
"B" end
303782
D8030WDMB
8-channel transceiver single-mode,
1 fiber, "A" end
303777
D8020WDMA-R3 8-channel transceiver multimode, 1 fiber,
"A" end, rack-mount
303779
D8020WDMB-R3 8-channel transceiver multimode, 1 fiber,
"B" end rack-mount
The IFS D7400 and D7100 Series Ethernet Media Converters combine
10/100 Ethernet signals over one or two optical fibers. The D7400 features four
RJ45 ports and two fiber ports for drop-and-repeat. The IFS D7400 and
D7100 Converters are compatible devices complying with IEEE 802.3. Models within
this series are available for use with multimode or single-mode optical fiber and are
compatible with standard 100-FX networks. Plug-and-play design ensures ease of
installation requiring no electrical or optical adjustments. Each converter
incorporates power and link status-indicating LEDs for monitoring proper system
operation. In addition, two continuously active contact closure relays are available to
activate an external audible or visual warning signal in the event of a fiber break or
loss of power.
FEATURES
• Plug-and-play installation
• D7400 Series combines four RJ45 ports to Fiber 10/100
• D7100 converts one RJ45 port to fiber 10/100
• Auto-negotiate or switch-selectable data rate
• Auto network detection MDI/MDI-X
• Environmentally hardened -40° to +74°C
• Multimode or single-mode versions
• UL Listed
• Lifetime warranty
Anixter No. Vendor No.
Description
272993
D7420
MM, 850 nm, 2F, Ethernet
272994
D7420WDM
MM, 850/1300 nm, 1F, Ethernet
272995
D7430WDM
SM, 1310 nm/1550 nm, 1F, Ethernet
272985
D7120
MM, 850 nm, 2F, Ethernet
272990
D7120WDMA/B
MM, 850/1300 nm, 1F, Ethernet
Request the latest literature and guides from Anixter.
6.12
PR7933V2-12341.eps
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 13 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
IFS
Fiber;Transceivers, Ethernet/75
Index1.Networking Systems//Video Products//Video Security Systems
10/100 Mbps Ethernet Optical Transceiver
IFS
PR7932V2-12338.eps
FEATURES
• Plug-and-play installation
• Supports 10 or 100 Mbps Ethernet data
• Auto-negotiate or switch-selectable data rate
• Auto network detection MDI/MDI-X
• Environmentally hardened -40° to +74°C
• Multimode or single-mode versions
• UL Listed
• Lifetime warranty
Anixter No. Vendor No.
Description
272985
D7120
MM, 850 nm, 2F, Ethernet
272990
D7120WDMA/B
MM, 850/1300 nm, 1F, Ethernet
Transceivers;Data/15011
Index1.Networking Systems//Video Products//Video Security Systems
IFS Hardened Unmanaged 3-port Switch
IFS
PR21460V2-121575.eps
The IFS DE7100 and DE7300 Series Ethernet 3-port transceivers are designed to
combine and convert Ethernet data over multimode, single-mode or Ethernet cable.
The DE7100 provides 10/100 ports. The DE7300 provides 10/100/1000 ports. Both
available in any combination of electrical or optical ports. They are environmentally
hardened to operate in extreme temperatures. Loss of optical link contact closure for
remote alarm sensing. Status-indicating LEDs for power and data activity are present
at the RJ45 connector. At the fiber optic transceiver end, link and data LEDs provide
operational status. Plug-and-play design ensures ease of installation, requiring no
optical adjustments. The modules are available in stand-alone only.
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.13
Video Transmission and Wireless
The IFS D7100 Series Ethernet transceiver is designed to transmit and receive 10 or
100 Mbps data over multimode or single-mode fiber. The IFS D7100 Series will
function as a 10 Mbps Ethernet link, or as a 100 Mbps Ethernet link without any
adjustments. The D7100 Series is environmentally hardened to operate in extreme
temperatures. Status-indicating LEDs for power and data type are present at the
RJ45 connector and at the fiber optic transceiver end. Plug-and-play design ensures
ease of installation requiring no electrical or optical adjustments.
FEATURES
• Auto network detection MDI/MDI-X
• Full-duplex or half-duplex data
• Distances up to 45 km (28 miles)
• Extended ambient operating temperature range: -40°C to +74°C
• Designed to meet full compliance with the environmental requirements (ambient
operating temperature, mechanical shock, vibration, humidity with
condensation, high-line/low-line voltage conditions and transient voltage
protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal
Control Equipment
• No in-field optical adjustments required
• Power, transmit and receive data status LED indicators
• Loss of optical link contact closure
• IEEE 802.3 compliant
• Lifetime warranty
Anixter No. Vendor No.
Description
359496
DE7300-EE
3-port Gigabit Ethernet switch, 3 x
10/100/1000 TX electrical
359500
DE7300-MS
3-port Gigabit Ethernet switch, 1 x
10/100/1000 TX electrical, 1 x 1000 FX
MM, 1 x 1000 FX SM
359498
DE7300-MM
3-port Gigabit Ethernet switch, 1 x
10/100/1000 TX electrical, 2 x
1000 FX MM
359499
DE7300-M3
3-port Gigabit Ethernet switch, 3 x
1000 FX MM
359502
DE7300-SS
3-port Gigabit Ethernet switch, 1 x
10/100/1000 TX electrical, 2 x
1000 FX SM
359501
DE7300-SE
3-port Gigabit Ethernet switch, 2 x
10/100/1000 TX electrical, 1 x
1000 FX SM
359490
DE7100-EE
3-port Ethernet switch multimode
359492
DE7100-MM
3-port Ethernet switch, 2 x 100 FX MM, 1 x
10/100 TX electrical
359491
DE7100-ME
3-port Ethernet switch, 1 x 100 FX MM, 2 x
10/100 TX electrical
359495
DE7100-SS
3-port Ethernet switch, 2 x 100 FX SM, 1 x
10/100 TX electrical
Revise - Sec06 Video Transmission and Wireless.fm Page 14 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
IFS
Transceivers;Data/15012
Index1.Networking Systems//Video Products//Video Security Systems
IFS Hardened Ethernet to Fiber Media Converters
IFS
PR21461V2-121576.eps
Anixter No.
393861
Vendor No.
DE7230M
359487
359489
DE7200-SS
DE7230M
424766
424767
DE7400-MM
DE7400-MS
424769
DE7400-SS
Description
2-port mini Ethernet converter, SM,
1300 nm, 1F
Ethernet on fiber repeater (4 SM) 10/100
Ethernet to fiber (2 SM) 10/100 mini
media converter
Ethernet on fiber repeater (4 MM) GigE
Ethernet on fiber mode converter,
single-mode to multimode GigE (2 SM and
2 MM)
Ethernet on fiber repeater (4 SM) GigE
Transceivers;Data/15013
Video Transmission and Wireless
Index 1.Networking Systems//Video Products//Video Security Systems
The IFS DE7200, D7200M and DE7400 Series Ethernet to Fiber Media Converters are
designed to convert and transmit Ethernet signals over fiber. When space is at a
premium, use the D7200M series inside IP and megapixel camera housings. The
DE7200 and D7200M convert 10/100 signals. The DE7400 series converts
10/100/1000 Ethernet signals. The entire series is designed to work over multimode
or single-mode to take Ethernet signals beyond the networking limitations of
100 meters. The series is environmentally hardened to operate in extreme
temperatures. Loss of optical link contact closure for remote alarm sensing. Status
indicating LEDs for power and data rate are present at the RJ45 connector. At the
fiber optic transceiver end, link and data LEDs provide operational status.
Plug-and-play design ensures ease of installation requiring no optical adjustments.
The modules are available in stand-alone only. Device used to take IP signals from
access control, IP cameras, megapixel cameras, traffic systems, or any IP system
farther than 300 feet.
D
FEATURES
• Auto Network Detection MDI/MDI-X sensing
• Full-duplex or half-duplex data
• Distances up to 45 km (28 miles)
• Extended ambient operating temperature range: -40°C to +74°C
• Designed to meet full compliance with the environmental requirements (ambient
operating temperature, mechanical shock, vibration, humidity with
condensation, high-line/low-line voltage conditions and transient voltage
protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal
Control Equipment
• Multimode and single-mode versions available
• SC optical connectors standard
• No in-field optical adjustments required
• Power, transmit and receive data status LED indicators
• Loss of optical link contact closure
• LEEE 802.3 compliant
• Lifetime warranty
Anixter No. Vendor No.
Description
359483
DE7200-M
2-port Ethernet media converter, 1 x
100 FX MM, 1 x 10/100 TX electrical
359484
DE7200-MM
2-port Ethernet repeater, 2 x 100 FX MM
359485
DE7200-MS
2-port Ethernet mode converter, 1 x
100 FX MM, 1 x 100 FX SM
359486
DE7200-S
2-port Ethernet media converter, 1 x
100 FX SM, 1 x 10/100 TX electrical
359488
DE7210M
2-port mini Ethernet converter, MM,
1300 nm, 1F
10/100 Mbps Ethernet 3-port Transceiver
IFS
The IFS DE7300 Series Gigabit Ethernet 3-port transceiver is designed to transmit and
receive 1,000 Mbps data over fiber or 10/100/1000 Mbps data over Cat 5e electrical
cable. It is available in any combination of electrical or optical ports. The DE7300 is
environmentally hardened to operate in extreme temperatures. Loss of optical link
contact closure for remote alarm sensing. Status-indicating LEDs for power and data
activity are present at the RJ45 connector. At the fiber optic transceiver end, link and
data LEDs provide operational status. Plug-and-play design ensures ease of
installation, requiring no optical adjustments. The modules are available in
stand-alone versions only.
FEATURES
• 10/100/1000 Mbps Ethernet
• 10/100/1000BASE-T electrical port
• 1000BASE-FX optical port
• Full-duplex or half-duplex data
• Automatic Network Detection Mdi/Mdi-x
• Designed to meet full compliance with the environmental requirements (ambient
operating temperature, mechanical shock, vibration, humidity with
condensation, high-line/low-line voltage conditions and transient voltage
protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal
Control Equipment
• Extended ambient operating temperature range: -40°C to +74°C
• No in-field optical adjustments required
• Power, transmit and receive data status LED indicators
• Loss of optical link contact closure
• Distances up to 30 km (18 miles)
• SC optical connectors standard
• IEEE 802.3 compliant
• Lifetime warranty
Request the latest literature and guides from Anixter.
6.14
PR21462V2-121573.eps
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 15 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
IFS
Anixter No.
359496
Vendor No.
DE7300-EE
359500
DE7300-MS
359498
DE7300-MM
359499
DE7300-M3
359502
DE7300-SS
359501
DE7300-SE
Description
3-port Gigabit Ethernet switch, 3 x
10/100/1000 TX electrical
3-port Gigabit Ethernet switch, 1 x
10/100/1000 TX electrical, 1 x 1000 FX
MM, 1 x 1000 FX SM
3-port Gigabit Ethernet switch, 1 x
10/100/1000 TX electrical, 2 x
1000 FX MM
3-port Gigabit Ethernet switch, 3 x
1000 FX MM
3-port Gigabit Ethernet switch, 1 x
10/100/1000 TX electrical, 2 x
1000 FX SM
3-port Gigabit Ethernet switch, 2 x
10/100/1000 TX electrical, 1 x
1000 FX SM
• SC optical connectors standard
• IEEE 802.3 compliant
• Lifetime warranty
Anixter No. Vendor No.
359504
DE7400-M
359507
DE7400-S
Description
2-port Gigabit Ethernet media converter,
1 x 10/100/1000 TX electrical, 1 x
1000 FX MM, 2F
2-port Gigabit Ethernet media converter,
1 x 10/100/1000 TX electrical, 1 x
1000 FX SM, 2F
Fiber;Telephony Module/3416
Index 1.Networking Systems//Video Products//Video Security Systems
Telephony Transmission
IFS
PR14891V2-31949.eps
Transceivers;Data/15014
10/100/1000 Mbps Gigabit Ethernet 2-port Transceiver
IFS
PR21463V2-121584.eps
The IFS DE7400 Series Gigabit Ethernet 2-port transceiver is designed to transmit and
receive 1000 Mbps data over fiber or 10/100/1000 Mbps data over Cat 5e electrical
cable. It is available in any combination of electrical or optical ports. The DE7400 is
environmentally hardened to operate in extreme temperatures. Loss of optical link
contact closure for remote alarm sensing. Status-indicating LEDs for power and data
activity are present at the RJ45 connector. At the fiber optic transceiver end, link and
data LEDs provide operational status. Plug-and-play design ensures ease of
installation, requiring no optical adjustments. The modules are available in either
stand-alone or rack-mount versions.
FEATURES
• 10/100/1000 Mbps Ethernet
• 10/100/1000BASE-T electrical port
• 1000BASE-FX optical port
• Full-duplex or half-duplex data
• Auto Network Detection Mdi/Mdi-x
• Designed to meet full compliance with the environmental requirements (ambient
operating temperature, mechanical shock, vibration, humidity with
condensation, high-line/low-line voltage conditions and transient voltage
protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal
Control Equipment
• Extended ambient operating temperature range: -40°C to +74°C
• No in-field optical adjustments required
• Power, transmit and receive data status LED indicators
• Loss of optical link contact closure
• Distances up to 30 km (18 miles)
The TT3000 Series touch-tone telephone digital interface provides extended
transmission of analog POTS (plain old telephone service) and 24-volt PBX (private
branch exchange) systems over one or two fiber optic fibers using the latest in digital
transmission technology. The modules also support many enhanced telephone
services offered by telephone providers, such as Caller ID, call waiting and three-way
calling. Use to make emergency phones fiber ready.
FEATURES
• Full FM or digital design
• 10 Mhz bandwidth per channel
• No in-field adjustments
• Wide operating ambient temperature range (-40° to +74°C)
• Lifetime warranty
Anixter No. Vendor No.
Description
341458
TT3020WDM
MM, transmitter, 850 nm, 1F
Note: Add '-R3' to model number for rack-mounting. Requires R3 rack,
purchased separately
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.15
Video Transmission and Wireless
Index1.Networking Systems//Video Products//Video Security Systems
Revise - Sec06 Video Transmission and Wireless.fm Page 16 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
IFS
Fiber;Audio Module/3410
Fiber;Transceiver/3413
Index1.Networking Systems//Video Products//Video Security Systems
Index 1.Networking Systems//Video Products//Video Security Systems
Audio Transmission
Self-healing Ring/Full-duplex Data Transceiver D19100SHR Series
Video Transmission and Wireless
IFS
PR7928V2-12326.eps
IFS offers a complete line of analog and digital audio-transmission products for
line-level applications with balanced and/or unbalanced configurations. Modules are
available for point-to-point and repeater topologies. Specialized units for intercom,
emergency broadcast, videoconferencing/distance learning and multimedia
applications are also available. Note: Add '-R3' to model number for rack-mounting.
Requires R3 rack, purchased separately.
FEATURES
• Full FM or digital design
• 10 MHz bandwidth per channel
• No in-field adjustments
• Wide operating ambient temperature range (-40° to +74°C)
• Lifetime warranty
POINT-TO-POINTD AUDIO TRANSMITTERS AND RECEIVERS
Anixter No. Vendor No.
Description
240397
AT1000
MM, transmitter, 850 nm
243570
AT1025
SM, transmitter, 1300 nm
240398
AR1000
MM, receiver, 850 nm
243572
AR1030
SM/MM, receiver, 1300 nm
IFS
PR7931V2-12335.eps
The D19130SHR Series Self-healing Ring Transceiver unit is a fully digital transceiver
designed for implementing traffic signalization/communications data networks of the
highest possible reliability. Unlike competing products, the multiple-master
capability of this series provides full protection against the possibility of a single
point of failure, significantly enhancing the reliability and availability of the network.
Primary and alternate-master transceiver units may be either co-located or diversity
located, and the data input/output interconnection to the primary and
alternate-master units is achieved by the use of a simple "Y" electrical cable.
FEATURES
• Unique multiple-master capability eliminates the possibility of a single point of
failure within the network
• Simple "Y" electrical cable provides data interconnect between primary and
alternate-master transceiver units
• Full data reclocking and regeneration
• User-configurable optical and electrical anti-streaming provides network
protection against faulty streaming controller operation
Anixter No. Vendor No.
Description
303739
D19130SHR-R3
SM, 1300 nm, 2F, rack-mount
Media Converters;Network/17466
AUDIO REPEATER
Anixter No. Vendor No.
243575
A2120
243576
A2125
Index 1.Networking Systems//Video Products//Video Security Systems
Description
MM, 1300 nm, 2F
SM, 1300 nm, 2F
Ethernet to Coax Media Converter
IFS
PR29464V2-217780.eps
DIGITAL 4-CHANNEL AUDIO MULTIPLEXER
Anixter No. Vendor No.
Description
303697
AT7430
SM, transmitter, 850 nm
303688
AR7430
SM, receiver, 850 nm
AIPHONE VIDEO INTERCOM SYSTEM
Anixter No. Vendor No.
Description
243578
VIC5211M
MM, master, 1F
243579
VIC5211R
MM, remote, 1F
BI-DIRECTIONAL VIDEO, AUDIO AND DATA TRANSCEIVER
Anixter No. Vendor No.
Description
243580
VAD7010WDMA
MM, 1300/850 nm, 1F
243581
VAD7010WDMB
MM, 850/1300 nm, 1F
TELEPHONE INTERFACE
Anixter No. Vendor No.
341458
TT3020WDM
Description
MM, transmitter, 850 nm, 1F
IFS offers a cost-effective solution to use coaxial cable to transmit a 10/100 Ethernet
signal. Use the coax converter in pairs, one at each end of the cable. Not only can you
transmit a fast Ethernet signal on coax, but you can reach distances beyond
1,000 meters. Great appliance for IP anywhere coax cable exists, like existing
hospitals and hotels with cable-TV or analog-camera systems.
FEATURES
• One RJ45 to one BNC female connector
• Wall-mount design
• 50 or 75 ohm coax
• Selectable data rate
Request the latest literature and guides from Anixter.
6.16
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 17 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
IFS
• Supports RG-6, RG-58 and RG-59
• 5 V DC, 2-amp power supply sold separately
• Three-year warranty
Anixter No. Vendor No.
Description
424749
MCE-COAX
Ethernet to coax 10/100 media converter;
order in quantities of two
424756
PS5VDC2A-US
Wall-mount power supply 5 V DC 2 amps
for splitters
UTP;Transmitters / Receivers/17518
Index 1.Networking Systems//Video Products//Video Security Systems
UTP Active 1-channel Transmitters and Receivers
IFS
PR29026V2-215095.eps
UTP;Passive Baluns/17517
Index1.Networking Systems//Video Products//Video Security Systems
UTP Passive Baluns
IFS
PR29025V2-215084.eps
FEATURES
• Compact size and no power required
• Plug-and-play
• Supports video and "Up-the-Coax" PTZ
• Compatible with existing UTP products
• Lifetime warranty
Anixter No. Vendor No.
Description
425167
GEC-PVTC-M
Passive balun, male BNC,
screwless terminal
425168
GEC-PVTC-MC
Passive balun, male BNC, 9 in. coax lead
425170
GEC-PVTC-MRTSP Passive balun, male BNC, right angle,
surge protection
425171
GEC-PVTC-MCSP
Passive balun, male BNC, 9 in. coax lead,
surge protection
425172
GEC-PVTC-MSP
Passive balun, male BNC, surge protection
425174
GEC-PVTC-FCSP
Passive balun, female BNC,
surge protection
UTP;HUBS/17519
Index 1.Networking Systems//Video Products//Video Security Systems
UTP Multichannel HUBs
IFS
PR29027V2-215105.eps
The UTP Multichannel HUB series offers a broad range of products. The series offers
passive and active HUBs. Compatible with most existing UTP transmitters. Passive
HUBs transmit video up to 750 feet. The active HUB series offers built-in video
compensation for a perfect picture quality transmitting to the maximum distance
rating of each unit.
FEATURES
• Built-in video compensation to deliver high-resolution video
• Plug-and-play
• Ground loop immunity
Continued on next page >>
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.17
Video Transmission and Wireless
IFS offers a complete line of passive baluns and combiners. Compact design and
broad product range are designed to meet every video-signal application. Capable of
transmitting video up to 750 feet with no power. Use active receivers for distances up
to 3,000 feet. Built-in surge protection available on select models.
IFS offers feature-rich 1-channel active transmitters and receivers. This series
delivers UTP transmission for distances up to 2,000, 4,000 and 6,000 ft. Without any
field adjustment, automatic video compensation delivers high-resolution video over
UTP. The active receiver paired with a passive balun will transmit video up to 2,000 ft.
Use the active transmitter and active receiver for 4,000 ft. To achieve 6,000 ft. on
UTP, use the active transmitter with active receiver series designed for 6,000 ft.
FEATURES
• Built-in video compensation to deliver high-resolution video
• Plug-and-play
• Ground loop immunity
• Built-in surge protection
• Lifetime warranty
• 12 V DC power supply, sold separately
Anixter No. Vendor No.
Description
424731
PS12VDC1.5A-U
Power supply wall-mount universal
12 V DC 1.5 amp
425175
GEC-1AVT
1-channel active video transmitter
425176
GEC-1AVR-AVC-4 1-channel active receiver, up to 4,000 feet
Revise - Sec06 Video Transmission and Wireless.fm Page 18 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
IFS
(continued)
UTP Multichannel HUBs
Anixter No.
425193
• Built-in surge protection
• Lifetime warranty
• 12 V DC power supply, sold separately
UTP MULTICHANNEL PASSIVE HUBS
Anixter No. Vendor No.
425177
GEC-4VPHUB
425179
GEC-8VPHUB
425180
GEC-16VPHUB
425181
GEC-32VPHUB
424731
PS12VDC1.5A-U
Video Transmission and Wireless
UTP MULTICHANNEL ACTIVE HUBS
Anixter No. Vendor No.
425185
GEC-8VARHUB-4
425186
GEC-16VARHUB-4
425188
GEC-32VARHUB-4
425189
GEC-8VARHUB-6
425190
GEC-16VARHUB-6
425192
424731
D
GEC-32VARHUB-6
PS12VDC1.5A-U
425194
425196
Description
4-channel passive hub
8-channel passive hub, 1U rack-mount
16-channel passive hub, 1U rack-mount
32-channel passive hub, 1U rack-mount
Power supply wall-mount universal
12 V DC 1.5 amp
Description
8-channel active hub, 4,000 feet max.
1U rack-mount
16-channel active hub, 4,000 feet max.
1U rack-mount
32-channel active hub, 4,000 feet max.
1U rack-mount
8-channel active hub, 6,000 feet max.
1U rack-mount
16-channel active hub, 6,000 feet max.
1U rack-mount
32-channel active hub, 6,000 feet max.
1U rack-mount
Power supply wall-mount universal
12 V DC 1.5 amp
425199
425200
425201
425202
425204
425205
425206
425207
Vendor No.
GEC-VCR
Description
1-channel combiner, video balun and
power receiver
GEC-VCR12V
1-channel combiner, video balun and
power receiver, plus 12 V DC converter
GEC-VPDBC
1-channel combiner, video balun,
data/power receiver
GEC-4VDPC
4-channel video, data/power combiner
GEC-4VDPBC
4-channel video balun and
data/power combiner
GEC-8VPDCHUB
8-channel power supply plus
VDP combiner
GEC-8PVPDTCHUB 8-channel power supply, VDP combiner,
and 8-channel video balun
GEC-16VDPC
16-channel video, data/power combiner
GEC-16VDPBC
16-channel video balun and
data/power combiner
GEC-16VPDCHUB 16-channel power supply plus
VDP combiner
GEC-16PVPDTCHUB 16-channel power supply, VDP combiner,
and 16-channel video balun
Fiber;Video System/11017
Index 1.Networking Systems//Video Products//Video Security Systems
S700V and S702V Video Transmission System
IFS
PR14959V2-34015.eps
UTP;Combiners/17520
Index1.Networking Systems//Video Products//Video Security Systems
UTP Video, Data, Power Combiners
IFS
PR29028V2-215108.eps
Simplify CCTV design and installations over a single UTP cable. Combiners transmit
video and receive data and power. This product series lowers the cost of wiring by
using one cable to the camera and combining multiple camera runs into one cable.
Increased system reliability is achieved by using the built-in isolated central power
supply and self-resetting fuses.
FEATURES
• Built-in video compensation to deliver high-resolution video
• Plug-and-play
• Ground loop immunity
• Built-in surge protection
• 8-channel camera power supply 24 V AC, 6 amps
• 16-channel camera power supply 24 V AC, 12 amp
• Lifetime warranty
The S700V Series video system is designed to transmit one or two channels of
baseband composite video up to 3.2 miles (5.2 km). It provides superior performance
and reliability at an economical price. The S700V is available in three versions: (1)
compact stand-alone modules providing one video channel on one fiber, (2)
rack-mounted cards providing one video channel on one fiber, and (3) rack-mounted
cards that support two video channels on two fibers. The S700V Series meets the
challenge for a low-cost, high-performance, fiber optic video-transmission system.
FEATURES
• One- or two-channel versions
• OAGC circuitry
• Works with all cameras
• Transmits up to 3.2 mi. (5.2 km)
• Stand-alone or rack modules
• Dual-channel rack modules
Anixter No. Vendor No.
Description
240217
S700VT-EST
1 fiber, transmitter
240218
S700VT-TST
Miniature, single channel
240219
S700VR-EST
Receiver only
240627
S702VT-EST
2 fiber, transmitter
240628
S702VR-EST
2 fiber, receiver
Request the latest literature and guides from Anixter.
6.18
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 19 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Transition Networks
Each switch combines performance and functionality with a space-saving
desktop design.
./Switches;Gigabit Ethernet, Unmanaged/11439
Index1.Networking Systems//Frame Switching//Stackables
10/100/1000BASE-T Gigabit Ethernet Switches
TRANSITION NETWORKS
PR20356V2-492332.eps
With Gigabit Ethernet rapidly gaining demand in the network, administrators are
demanding higher-density 10/100/1000 Mbps switches. Transition's Gigabit Ethernet
Workgroup switches deliver eight or 24 ports of Gigabit Ethernet. These reliable
switches deliver exceptional performance. Whether you need 10BASE-TX, 100BASE-TX
or 1000BASE-T, these switches are ready to run with any version of Ethernet over
copper cabling.
FEATURES
• Auto-negotiating for full or half duplex
• Flow control and back pressure
• Store and forward switching mode
• All ports Auto MDI/MDIX
• Ruggedized metal chassis
• Full wire-speed switching on all ports
Anixter No. Vendor No.
Description
237959
MIL-S500-NA
5-port 10/100 Mbps UTP switch
373012
MIL-S4800-NA
48-port 10/100BASE-TX switch with two
Gigabit ports
484249
S24TXA
24-port 10/100BASE-TX UTP switch
Switches;Gigabit Ethernet, Managed/13220
Index 1.Networking Systems//Frame Switching//Stackables
10/100/1000 Multilayer Managed Switches
Description
8-port 10/100/1000BASE-T
TRANSITION NETWORKS
PR34413V2-492356.eps
UNMANAGED COPPER SWITCHES WITH SFP SLOTS
Anixter No. Vendor No.
Description
335243
MIL-S24T2GPA-NA
24-port 10/100/1000BASE-T with two
SFP ports
Switches;Fast Ethernet, Unmanaged/13216
Index1.Networking Systems//Frame Switching//Stackables
8-port Switch with Internal Power Supply
TRANSITION NETWORKS
PR20357V2-492335.eps
The industry's smallest 8-port switch with an internal power supply, Transition's
MIL-S800i auto-negotiates 10/100 Mbps connections for fast and simple switching in
workgroup, small office and home environments.
Anixter No. Vendor No.
Description
385371
MIL-S800I-V2-NA
8-port 10/100BASE-TX (RJ45), 100 m
Switches;Fast Ethernet, Unmanaged/1836
Index1.Networking Systems//Frame Switching//Stackables
Unmanaged Stand-alone Switches
The MIL-SM4004TG is a managed, 4-port Gigabit Ethernet switch with auto-sensing
10/100/1000 ports plus four combo Small Form Pluggable (SFP) ports. The combo
SFP ports enable fiber connectivity through four hot-swappable, small form
factor-pluggable Gigabit interfaces. In addition, the 1U rack-mount form factor uses
less rack space and provides a lower per-port cost than comparable Gigabit Ethernet
switches. The MIL-SM24T4DPA is ideal for high-performance server aggregations such
as enterprise data centers and high-speed work groups. This managed Layer 2 switch
offers (24) 10/100/1000 ports and four dual-speed combo ports.
Anixter No. Vendor No.
Description
374559
MIL-SM4004TG-NA
4-port 10/100/1000BASE-T switch with
four 100/1000 SFP/RJ45 ports
484253
SM8T2DPA-NA
Eight 10/100/1000BASE-T ports and two
100/1000 SFP/RJ45 ports
423401
MIL-SM24T4DPA-NA 24 10/100/1000BASE-T ports and four
100/1000 SFP/RJ45 ports
Switches;Power over Ethernet, Endspan/13228
Index 1.Networking Systems//Frame Switching//Stackables
TRANSITION NETWORKS
pr5602V2-13708.eps
Remotely Managed PoE Switches
TRANSITION NETWORKS
Transition Networks' 10/100 Mbps switches are auto-sensing and allow for the
seamless integration of 100 Mbps connections while preserving network bandwidth.
PR20347V2-492329.eps
This switch series is fully compatible with devices that comply with the IEEE 802.3af
Standard and is capable of inserting power on the data pairs of the MDI to provide
Continued on next page >>
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.19
Video Transmission and Wireless
UNMANAGED COPPER SWITCHES
Anixter No. Vendor No.
339003
MIL-S8TA-NA
Revise - Sec06 Video Transmission and Wireless.fm Page 20 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Transition Networks
Video Transmission and Wireless
power to PD devices like network cameras and wireless access points. Management
features include port-based, dynamic and static VLANs, GVRP, VLAN Tagging, IGMP
Snooping, port mirroring, port security and virtual IP stacking.
Anixter No. Vendor No.
Description
351798
MIL-SM8TXAF2GPA-NA 8-port 10/100 PoE remotely managed
switch with two Gigabit combo ports
461763
SM8TAF2DPA-NA
8-port 10/100/1000 PoE remotely
managed switch with two
100/1000BASE-X SFP ports
474195
MIL-SM24TAF4GPA
20-port 10/100/1000 PoE remotely
managed PoE switch with four Gigabit
SFP/RJ45 combo ports
386916
SISPM1040-182D-LRT 8-port 10/100/1000 industrial-rated PoE
switch with two 10/100/1000 combo
ports, -40ºC to +65ºC operating temp.
484188
SISPM1040-384-LRT 8-port 10/100/1000 industrial-rated
PoE+ switch with four Gigabit Ethernet
SFP ports
Anixter No. Vendor No.
Description
419370
SISGM1040-244-LRT Four 10/100/1000BASE-T RJ45 ports with
four 100/1000 SFP combo ports, -10°C
to +75°C operating temp.
406741
SISGM1040-262D-LR Six 10/100/1000BASE-T RJ45 ports with
two 100/1000 SFP combo ports, -10ºC to
+50ºC operating temp.
Switches;Fast Ethernet, Unmanaged/14564
Index 1.Networking Systems//Frame Switching//Stackables
10/100 Industrial Unmanaged Switches
TRANSITION NETWORKS
PR23265V2-492350.eps
Switches;Industrial/15895
Index1.Networking Systems//Frame Switching//Stackables
Industrial Managed Switches
TRANSITION NETWORKS
PR23264V2-492347.eps
D
Eliminate EMI and RFI issues and overcome distance limitations with copper-based
cabling by using an industrial media converter or switch. Transition Networks'
industrial products are hardened devices designed to reliably operate in harsh
environments such as those found on factory floors, outdoor enclosures or other
hazardous environments. Advanced features include AutoCross, Auto-negotiation,
dry-contact relays and redundant DC power inputs.
Anixter No. Vendor No.
Description
351903
SISTM1010-180-LRT Eight 10/100BASE-TX RJ45 ports, -40°C
to +75°C operating temp.
351904
SISTM1011-162-LRT Six 10/100BASE-TX RJ45 ports to two
100BASE-FX ports, 1300 nm, MM, ST,
2 km, -40°C to +75°C operating temp.
351905
SISTM1013-162-LRT Six 10/100BASE-TX RJ45 ports to two
100BASE-FX ports, 1300 nm, MM, SC,
2 km, -40°C to +75°C operating temp.
351906
SISTM1014-162-LRT Six 10/100BASE-TX RJ45 ports to two
100BASE-FX ports, 1310 nm, SM, SC,
20 km, -40°C to +75°C operating temp.
Eliminate EMI and RFI issues and overcome distance limitations with copper-based
cabling by using an industrial media converter or switch. Transition Networks'
industrial products are hardened devices designed to reliably operate in harsh
environments such as those found on factory floors, outdoor enclosures or other
hazardous environments. Advanced features include AutoCross, Auto-negotiation,
dry-contact relays and redundant DC power inputs. Operating temperature: -40°C
to +75°C.
Anixter No. Vendor No.
Description
423402
SISTF1010-250-LRT 5-port 10/100BASE-TX RJ45, -40°C to
+75°C operating temp.
423404
SISTF1010-280-LRT 8-port 10/100BASE-TX RJ45, -40°C to
+75°C operating temp.
373485
SISTF1040-162D-LRT 16-port 10/100BASE-TX RJ45 with two
10/100/1000 combo ports, -40°C to
+75°C operating temp.
373905
SISTP1013-141-LRT 4-port 10/100 industrial-rated PoE
switch with one 100BASE-MM, (SC), 2 km,
-40°C to +75°C operating temp.
373906
SISTP1014-141-LRT 4-port 10/100 industrial-rated PoE
switch with one 100BASE-SM, (SC),
20 km, -40°C to +75°C operating temp.
434454
SISTF1011-241-LRT 4-port 10/100BASE-TX RJ45 to one
100BASE-FX, 1300 nm, multimode ST,
2 km, -40°C to +75°C operating temp.
434455
SISTF1013-241-LRT 4-port 10/100BASE-TX RJ45 to one
100BASE-FX, 1300 nm, multimode SC,
2 km, -40°C to +75°C operating temp.
434457
SISTF1014-241-LRT 4-port 10/100BASE-TX RJ45 to one
100BASE-FX, 1300 nm, single-mode SC,
SM, 2 km, -40°C to +75°C
operating temp.
Request the latest literature and guides from Anixter.
6.20
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 21 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Transition Networks
Power over Ethernet;Midspan/12404
Index1.Networking Systems//Shared-Media Hubs//Stackables
MiLAN's EmPowered Ethernet
TRANSITION NETWORKS
PR11154V2-492496.eps
Anixter No. Vendor No.
Description
255575
E-100BTX-FX-05-SM-NA 100BASE-TX RJ45 to 100BASE-FX,
1310 nm, single-mode, SC, 20 km
284520
E-100BTX-FX-05-LH-NA 100BASE-TX RJ45 to 100BASE-FX,
1310 nm, single-mode, SC, 40 km
Media Converters;Stand-alone/11485
Index 1.Networking Systems//Peripheral Devices//Transceivers/M ultiplexers
Extended Temperature Fast Ethernet Converters
TRANSITION NETWORKS
POE AND POE+ INJECTORS
Anixter No. Vendor No.
308055
MIL-L100I-NA
484186
MIL-L1000I
Description
1-port Power over Ethernet injector
1-port 10/100/1000 Power over Ethernet
Plus (PoE+) injector
Media Converters;Stand-alone/2736
Index1.Networking Systems//Peripheral Devices//Transceivers/Multiplex ers
Fast Ethernet Stand-alone Converters
TRANSITION NETWORKS
Designed to operate in Fast Ethernet environments where ambient temperatures can
rise as high as 65°C (149°F). Operating temperature: -25°C to +65°C.
Anixter No. Vendor No.
Description
284527
E-100BTX-FX-05-HT-NA 100BASE-TX RJ45 to 100BASE-FX,
1300 nm, multimode, ST, 2 km
284530
E-100BTX-FX-05-SCHT-NA 100BASE-TX RJ45 to 100BASE-FX,
1300 nm, multimode, SC, 2 km
284532
E-100BTX-FX-05-SMHT-NA 100BASE-TX RJ45 to 100BASE-FX,
1310 nm, single-mode, SC, 20 km
PR9933V2-492852.eps
Media Converters;Stand-alone/3955
Index 1.Networking Systems//Peripheral Devices//Protocol Converters
Gigabit Ethernet Stand-alone Converters
TRANSITION NETWORKS
Extend the distance between two fast Ethernet devices up to 2 km on multimode fiber
and up to 40 km on single-mode fiber; other long-haul options are available. These
full-featured products include AutoCross, Auto-negotiation, Link Pass Through, Far
End Fault and Pause. Converters supporting extended operating temperatures are also
available. 10/100 bridging converters are ideal for connecting 10/100 devices to a
100 Mbps fiber backbone.
Anixter No. Vendor No.
Description
213792
E-100BTX-FX-05-NA
100BASE-TX RJ45 to 100BASE-FX,
1300 nm, multimode, ST, 2 km
214108
E-100BTX-FX-05-SC-NA 100BASE-TX RJ45 to 100BASE-FX,
1300 nm, multimode, SC, 2 km
255573
E-100BTX-FX-05-MT-NA 100BASE-TX RJ45 to 100BASE-FX,
1300 nm, multimode, MT-RJ, 2 km
312465
E-100BTX-FX-05-LC-NA 100BASE-TX RJ45 to 100BASE-FX,
1300 nm, multimode, LC, 2 km
PR12171V2-492640.eps
Migrate to Gigabit in a cost-effective manner. When Gigabit media converters are
used in conjunction with lower-cost 1000BASE-T switches, users can take advantage
of the high-bandwidth Gigabit Ethernet offers without all of the higher costs. Optional
single-strand media converters allow you to double your fiber capacity by
transmitting and receiving data over one strand of fiber.
Anixter No. Vendor No.
Description
332341
SGETF1013-110-NA 1000BASE-T RJ45 to 1000BASE-SX,
850 nm, multimode, SC, 220 m on
62.5/125, 550 m on 50/125
333559
SGETF1014-110-NA 1000BASE-T RJ45 to 1000BASE-LX,
1310 nm, single-mode, SC, 10 km
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.21
Video Transmission and Wireless
Power over Ethernet Injection and Splitting Solutions, MiLAN's EmPowered Ethernet
Series Power over Ethernet (PoE) solutions, deliver a unified supply of data, voice and
video as well as electrical power through a single source by sending power over
standard twisted-pair cables. Power over Ethernet simplifies installation and
eliminates the need to run separate power cords and LAN cables to each access point
or port location.
PR9936V2-492861.eps
Revise - Sec06 Video Transmission and Wireless.fm Page 22 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Transition Networks
Anixter No. Vendor No.
333562
SGETF1024-110-NA
333563
333565
SGETF1029-110-NA
SGETF1029-111-NA
Description
1000BASE-T RJ45 to 1000BASE-SX,
1310 nm, extended, multimode,
(62.5/125 fiber only) SC up to 2 km
1000BASE-T RJ45 to 1000BASE-LX,
1310 nm TX/1550 nm RX, single-fiber,
single-mode, SC 20 km
1000BASE-T RJ45 to 1000BASE-LX,
1550 nm TX/1310 nm RX, single-fiber,
single-mode, SC 20 km
Media Converters;Stand-alone/10820
Index1.Networking Systems//Peripheral Devices//Transceivers/Multiplex ers
10/100/1000 Media Converters
Video Transmission and Wireless
TRANSITION NETWORKS
PR9940V2-492870.eps
The 10/100/1000 media converters will offer a low-cost integration option for
network managers who want to migrate from 10/100 networks to Gigabit Ethernet.
Gigabit-only switches
D can now be connected to a 10/100 network at distances up to
125 km with long-haul options.
Anixter No. Vendor No.
Description
268663
SGFEB1013-120-NA 10/100/1000BASE-T RJ45 to
1000BASE-SX, 850 nm, multimode, SC,
220 m
373495
SGFEB1014-120-NA 10/100/1000BASE-T RJ45 to
1000BASE-LX, 1310 nm, single-mode, SC,
10 km
268667
SGFEB1024-120-NA 10/100/1000BASE-T RJ45 to
1000BASE-SX, 1310 nm, extended,
multimode (62.5/125 fiber only), SC, up
to 2 km
Media Converters;Stand-alone/11512
Index1.Networking Systems//Peripheral Devices//Transceivers/Multiplex ers
Power over Ethernet Media Converters
TRANSITION NETWORKS
PR23266V2-492353.eps
enterprises to power network devices directly over a UTP data connection. The Power
over Ethernet (PoE) converter emulates IEEE 802.3af Power Sourcing Equipment (PSE)
and it is compatible with Powered Devices (PD) that comply with the 802.3af
Standard. The ideal solution for delivering power over copper cabling to wireless
access points, IP telephones and PoE cameras.
POWER OVER FAST ETHERNET MEDIA CONVERTERS
Anixter No. Vendor No.
Description
285061
SFEPE1011-100
AC powered 100BASE-FX, 1300 nm,
multimode, ST, 2 km to PoE
100BASE-TX RJ45
285062
SFEPE1013-100-NA AC powered 100BASE-FX, 1300 nm,
multimode, SC, 2 km to PoE
100BASE-TX RJ45
285063
SFEPE1014-100-NA AC powered 100BASE-FX, single-mode,
1310 nm, SC, 20 km to PoE
100BASE-TX RJ45
285064
SFEPE1011-110
DC powered 100BASE-FX, multimode,
1300 nm, ST, 2 km to PoE
100BASE-TX RJ45
285065
SFEPE1013-110
DC powered 100BASE-FX, multimode,
1300 nm, SC, 2 km to PoE
100BASE-TX RJ45
285067
SFEPE1014-110
DC powered 100BASE-FX, single-mode,
1310 nm, SC, 20 km to PoE
100BASE-TX RJ45
10/100 BRIDGING POWER OVER ETHERNET MEDIA CONVERTERS
Anixter No. Vendor No.
Description
330092
SPOEB1011-100-NA 10/100BASE-TX to 100BASE-FX,
multimode, 1300 nm, ST, 2 km
330093
SPOEB1013-100-NA 10/100BASE-TX to 100BASE-FX,
multimode, 1300 nm, SC, 2 km
330094
SPOEB1014-100-NA 10/100BASE-TX to 100BASE-FX,
single-mode, 1310 nm, SC, 20 km
10/100/1000 BRIDGING POWER OVER ETHERNET MEDIA CONVERTERS
Anixter No. Vendor No.
Description
379289
SGPOE1013-100-NA 10/100/1000BASE-T to 1000BASE-SX,
multimode, 850 nm, SC
379290
SGPOE1014-100-NA 10/100/1000BASE-T to 1000BASE-LX,
single-mode, 1310 nm, SC, 10 km
379288
SGPOE1040-100-NA 10/100/1000BASE-T to 100/1000BASE-X
SFP slot (empty)
379291
SGPOE1040-110-NA 10/100/1000BASE-T to two
100/1000BASE-X SFP slots (empty)
Extend network distances and power PoE-enabled devices with a Power over Ethernet
media converter from Transition Networks. These PoE converters will enable
Request the latest literature and guides from Anixter.
6.22
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 23 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Transition Networks
Media Converters;Stand-alone/13230
Index1.Networking Systems//Peripheral Devices//Transceivers/Multiplex ers
Analog Video CCTV Media Converters
TRANSITION NETWORKS
PR12173V2-492646.eps
Media Converters;Stand-alone/13235
Index1.Networking Systems//Peripheral Devices//Transceivers/Multiplex ers
Bridging Mini Stand-alone Media Converters
TRANSITION NETWORKS
PR12174V2-492649.eps
The Mini Media Converters provide a cost-effective method for integrating fiber optic
cabling into a 10/100 or 10/100/1000 UTP environment. With its miniature size, the
Mini offers a space-saving alternative while it converts copper to fiber with the
smallest footprint in the industry. Depending upon the unit, this plug-and-play media
converter offers three methods for powering the unit. The Mini can be powered with
the included power adapter, while other options include powering through a USB port
or through an 802.3af Power over Ethernet-enabled RJ45 port. Two power options can
Media Converters;Chassis, Modules/16269
Index 1.Networking Systems//Peripheral Devices//Transceivers/M ultiplexers
Point System Modular Media Converters
TRANSITION NETWORKS
PR9945V2-492885.eps
The Point System is a cost-effective, fully configurable, managed modular
media-conversion platform that provides users with the flexibility to build their own
custom media-conversion system. The system includes a rack-mountable chassis and
modular, hot-swappable, slide-in media-converter cards. Converters supporting
various communications protocols can be used in the same chassis and provide
managed media-conversion services to suit a custom network application. Chassis
are available in either AC or DC power versions. Transition's SNMP management
application, Focal Point 2.0, is included free of charge with each chassis and each
management module. Combining media conversion with copper-based equipment can
save up to 45 percent in cost. The Point System's modular design allows users to add
converters as they need to add fiber to their network. Therefore, users can utilize
their existing copper-based equipment and not buy fixed multiport fiber devices.
FEATURES
• Cost savings
• Flexibility
• Maximum control
• Reliability
• Potential for future growth
POINT SYSTEM CHASSIS AND ACCESSORIES
Anixter No. Vendor No.
Description
249729
CPSMC1900-100
19-slot Point System chassis
249803
CPSMC1300-100
13-slot Point System chassis
269844
CPSMC0800-100-NA 8-slot Point System chassis
249804
CPSMC0200-200
Dual-slot Point System chassis
231557
CPSMC0100-200
Single-slot Point System chassis
251332
CPSMP-120-NA
Redundant 120/240 V AC
for CPSMC1300-100
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.23
Video Transmission and Wireless
Transition Networks' analog composite video media transmitters convert CCTV signals
from cameras to multimode or single-mode fiber for up to 10 km. Transition
Networks' analog video media receiver converts the optical signal back to an analog
composite video signal. All conversion is performed in real time. Automatic gain
control installed on both transmitter and receiver maintains desired quality of video's
contrast and brightness for extended distances. No field adjustments are necessary.
Wide-input-range power supply allows for multiple choices of power source including
camera power supply.
Anixter No. Vendor No.
Description
324798
J/VD-TX-01-NA
Video transmitter, coax BNC to 850 nm,
multimode, ST, 1 km
324801
J/VD-TX-01-SC-NA
Video transmitter, coax BNC to 850 nm,
multimode, SC, 1 km
324804
J/VD-TX-01-SM-NA
Video transmitter, coax BNC to 1310 nm,
single-mode, ST, 10 km
324799
J/VD-RX-01-NA
Video receiver, coax BNC to 850 nm,
multimode, ST, 10 km
324802
J/VD-RX-01-SC-NA
Video receiver, coax BNC to 850 nm,
multimode, SC, 1 km
324805
J/VD-RX-01-SM-NA
Video receiver, coax BNC to 1310 nm,
single-mode, ST, 10 km
be used simultaneously, providing the security of redundant power supplies. The Mini
is available with either ST or SC fiber interfaces and is available for either multimode
or single-mode fiber.
Anixter No. Vendor No.
Description
326709
MP/E-PSW-FX-01-NA
10/100BASE-TX RJ45 to 100BASE-FX,
multimode, 1300 nm, ST, 2 km
326710
M/E-PSW-FX-01-SC-NA 10/100BASE-TX RJ45 to 100BASE-FX,
multimode, 1300 nm, SC, 2 km
326711
M/E-PSW-FX-01-SM-NA 10/100BASE-TX RJ45 to 100BASE-FX,
single-mode, 1310 nm, SC, 20 km
379139
M/GE-PSW-SX-01-NA
10/100/1000BASE-T to 1000BASE-SX,
multimode, 850 nm, SC, 220 m on
62.5/125, 550 m on 50/125
379175
M/GE-PSW-LX-01-NA
10/100/1000BASE-T to 1000BASE-LX,
single-mode, 1310 nm, SC, 10k m
Revise - Sec06 Video Transmission and Wireless.fm Page 24 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Transition Networks
Anixter No. Vendor No.
284293
CPSMP-180-NA
Video Transmission and Wireless
249802
227237
249734
CPSMM-120
CPSFP-200
CPSLD-100
Description
Redundant 120/240 V AC
for CPSMC0800-100
Single-slot primary management module
Faceplate for use on all empty slots
LED power status panel for the 19- or
8-slot Point System chassis
ETHERNET SLIDE-IN CONVERTER MODULES
Anixter No. Vendor No.
Description
251344
CETTF1011-105
10BASE-T RJ45 to 10BASE-FL, 850 nm,
multimode, ST, 2 km
231621
CETTF1012-105
10BASE-T RJ45 to 10BASE-FL, 1310 nm,
single-mode, ST, 20 km
251345
CETTF1013-105
10BASE-T RJ45 to 10BASE-FL, 850 nm,
multimode, SC, 2 km
284661
CETTF1022-105
10BASE-T RJ45 to 10BASE-FL, 1310 nm,
single-mode, ST, 40 km
284663
CETTF1027-105
10BASE-T RJ45 to 10BASE-FL, 1300 nm,
multimode, ST, 5 km
DUAL-STRAND FAST ETHERNET CONVERTER MODULES
Anixter No. Vendor No.
Description
391000
CFETF1011-205
100BASE-TX RJ45 to 100BASE-FX,
1300 nm, multimode, ST, 2 km
277828
CFETF1013-205
100BASE-TX RJ45 to 100BASE-FX,
1300 nm, multimode, SC, 2 km
D
433922
CFETF1039-205
100BASE-TX RJ45 to 100BASE-FX,
1300 nm, multimode, LC, 2 km
260653
CFETF1014-205
100BASE-TX RJ45 to 100BASE-FX,
1310 nm, single-mode, SC, 20 km
SINGLE-STRAND FAST ETHERNET CONVERTER MODULES
Anixter No. Vendor No.
Description
269852
CFETF1029-205
100BASE-TX RJ45 to 100BASE-FX,
1310 nm TX/1550 nm RX, single-fiber,
single-mode, SC, 20 km
269856
CFETF1029-206
100BASE-TX RJ45 to 100BASE-FX,
1550 nm TX/1310 nm RX, single-fiber,
single-mode, SC, 20 km
10/100/1000 MEDIA CONVERTER MODULES
Anixter No. Vendor No.
Description
373778
CGFEB1013-120
10/100/1000BASE-T RJ45 to
1000BASE-SX, 850 nm, multimode, SC,
220 m
268669
CGFEB1014-120
10/100/1000BASE-T RJ45 to
1000BASE-LX, 1310 nm, multimode, SC,
10 km
373909
CGFEB1024-120
10/100/1000BASE-T RJ45 to
1000BASE-SX, 1300 nm, extended,
multimode (62.5/125 fiber only), SC, up
to 2 km
SINGLE-MODE TO MULTIMODE SLIDE-IN CONVERTER MODULES
Anixter No. Vendor No.
Description
231628
CFMFF1314-200
Fast Ethernet or ATM/SONET, 1300 nm,
multimode, SC, 2 km to 1310 nm,
single-mode, SC, 20 km
231629
CFMFF1315-200
Fast Ethernet or ATM/SONET, 1300 nm,
multimode, SC, 2 km to 1310 nm,
single-mode, SC, 40 km
231633
CFMFF1314-220
Gigabit Ethernet 1000BASE-SX, 850 nm,
multimode, SC, 220 m to 1000BASE-LX,
1310 nm, single-mode, SC, 10 km
231634
CFMFF1315-220
Gigabit Ethernet 1000BASE-SX, 850 nm,
multimode, SC, 220 m to 1000BASE-LX,
1310 nm, single-mode, SC, 25 km
T1/E1 AND DS3-T3/E3 SLIDE-IN MEDIA CONVERTER MODULES
Anixter No. Vendor No.
Description
423409
CSDTF1011-120
T1/E1 twisted-pair RJ45 to 850 nm,
multimode, ST, 2 km, with
remote management
423410
CSDTF1013-120
T1/E1 twisted-pair RJ45 to 850 nm,
multimode, SC, 2 km, with
remote management
422080
CSDTF1014-120
T1/E1 twisted-pair RJ45 to 1310 nm,
single-mode, SC, 20 km, with
remote management
GIGABIT ETHERNET SLIDE-IN CONVERTER MODULES
Anixter No. Vendor No.
Description
332151
CGETF1013-110
1000BASE-T RJ45 to 1000BASE-SX,
850 nm, multimode SC, 220 m
332152
CGETF1014-110
1000BASE-T RJ45 to 1000BASE-LX,
1310 nm, single-mode, SC, 10 km
332153
CGETF1024-110
1000BASE-T RJ45 to 1000BASE-SX,
1300 nm extended, multimode
(62.5/125 fiber only), SC (up to 2 km)
Request the latest literature and guides from Anixter.
6.24
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 25 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Transition Networks
(continued)
Point System Modular Media Converters
RS-232 AND RS-422/485 SLIDE-IN MODULE MEDIA CONVERTERS
Anixter No. Vendor No.
Description
284712
CRS2F3111-100
RS-232 with remote management DB-9 to
1300 nm, multimode, ST, 2 km
284730
CRS2F3114-100
RS-232 with remote management DB-9 to
1310 nm, single-mode, SC, 20 km
282279
CRS4F3111-100
RS-422/485 DB-9 to 1300 nm,
multimode, ST, 2 km
282281
CRS4F3114-100
RS-422/485 DB-9 to 1310 nm,
single-mode, SC, 20 km
282283
CRS4F3211-100
RS-422/485 terminal block to 1300 nm,
multimode, ST, 2 km
282286
CRS4F3214-100
RS-422/485 terminal block to 1310 nm,
single-mode, SC, 20 km
HIGH-SPEED SERIAL-TO-FIBER SLIDE-IN MEDIA CONVERTER MODULES
Anixter No. Vendor No.
Description
330083
CPSVT2611-100
High-speed serial 26-pin to 1300 nm,
multimode, ST, 2 km
257498
CPSVT2613-100
High-speed serial 26-pin to 1300 nm,
multimode, SC, 2 km
330084
CPSVT2614-100
High-speed serial 26-pin to 1310 nm,
single-mode, SC, 20 km
Index 1.Networking Systems//Peripheral Devices//Transceivers/M ultiplexers
Small Form Factor Pluggables
TRANSITION NETWORKS
PR11103V2-492481.eps
Transition Networks Small Form Factor Pluggable (SFP) transceivers are designed for
bi-directional serial optical data communications such as Gigabit Ethernet or Fiber
Channel at speeds up to 1.25 Gbps. This device is designed for use in switches, and
routers compatible with Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)
Anixter No. Vendor No.
Description
313699
TN-SFP-SX
1000BASE-SX, 850 nm, LC, 220 m
313700
TN-SFP-LX1
1000BASE-LX, 1310 nm, LC, 10 km
313701
TN-SFP-LX3
1000BASE-LX, 1310 nm, LC, 30 km
313702
TN-SFP-LX5
1000BASE-LX, 1550 nm, LC, 50 km
313703
TN-SFP-LX8
1000BASE-LX, 1550 nm, LC, 80 km
330115
TN-SFP-LX12
1000BASE-LX, 1550 nm, LC, 120 km
330097
TN-SFP-FC2XM
Fiber channel 2.5 Gbps, 850 nm,
multimode, LC
330116
TN-SFP-FC2XS15
Fiber channel 2.5 Gbps, 1310 nm,
single-mode, LC, 15 km
330117
TN-SFP-FC2XS2
Fiber channel 2.5 Gbps, 1310 nm,
single-mode, LC, 2 km
330118
TN-SFP-FC2XS40
Fiber channel 2.5 Gbps, 1310 nm,
single-mode, LC, 40 km
330119
TN-SFP-OC12M
OC12 622 Mbps, 1310 nm, multimode,
LC, 1 km
330120
TN-SFP-OC12S
OC12 622 Mbps, 1310 nm, single-mode,
LC, 20 km
330121
TN-SFP-OC3M
OC3 125 Mbps, 1310 nm, multimode, LC,
2 km
330122
TN-SFP-OC3S
OC3 155 Mbps, 1310 nm, single-mode,
LC, 20 km
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.25
Video Transmission and Wireless
4X T1/E1 PLUS 10/100 ETHERNET TRANSPORT MUX MEDIA CONVERTER MODULES
Anixter No. Vendor No.
Description
313686
C4TEF1011-100
Four ports T1/E1 RJ48 and an
RS-232 6-pin DIN to 1300 nm,
multimode, ST, 2 km
313687
C4TEF1013-100
Four ports T1/E1 RJ48 and an
RS-232 6-pin DIN to 1300 nm,
multimode, SC, 2 km
313689
C4TEF1014-100
Four ports T1/E1 RJ48 and an
RS-232 6-pin DIN to 1310 nm,
single-mode, SC, 20 km
313690
C4TEF1011-110
Four ports T1/E1 RJ48, an RS-232 6-pin
DIN and 10/100BASE-TX RJ45 to
1300 nm, multimode, ST, 2 km
313691
C4TEF1013-110
Four ports T1/E1 RJ48, an RS-232 6-pin
DIN and 10/100BASE-TX RJ45 to
1300 nm, multimode, SC, 2 km
313694
C4TEF1014-110
Four ports T1/E1 RJ48, an RS-232 6-pin
DIN and 10/100BASE-TX RJ45 to
1310 nm, single-mode, SC, 20 km
Transceivers;Ethernet/15986
Revise - Sec06 Video Transmission and Wireless.fm Page 26 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Interlogix
./Fiber;Video System/3286
Index1.Networking Systems//Video Products//Video Security Systems
B780G High-resolution Video Component Fiber Links
Video Transmission and Wireless
INTERLOGIX
PR14960V2-34013.eps
The Fiber Options B780G high-resolution component video links are designed to
support RGB signals for projector and plasma display screens and UXGA
(1,600x1,200) computer systems with resolution up to 2k x 2k pixels. The RGB
component signals are intensity modulated with a bandwidth of 125 MHz per
component. The unit operates with either Sync-On-Green, H&V drives or composite
sync. To satisfy the requirements of the video and computer world, the
B780G/B7780G feature both BNC and the HD-15 computer-interface connectors.
Loop-thru BNC connectors with selectable 75 ohm termination are provided on the
transmitter. The low-profile 1RU chassis can be installed in a standard 19 in.
equipment rack, table top, under-the-desk or ceiling-mounted with the removable
mounting brackets.
FEATURES
• 125 MHz per component
• 1,600x1,200
• Horizontal frequency
15-130 kHz
D
• VGA, SVGA and UXGA
• RGB
• BNC and HD-15 computer interface
• Resolution up to 2k x 2k pixels
• H&V Sync or Sync-On-Green
• Exclusive Pix-Lock Sync System
• 1-fiber or 3-fiber operation
• Multimode or single-mode fiber
• Optical budget 10 dB
Anixter No. Vendor No.
Description
273635
B780GT-RST3
Multimode transmitter
273638
B780GR-RST3
Multimode receiver
Fiber;Video Module/3279
Index1.Networking Systems//Video Products//Video Security Systems
S706V/S7706 Digital Video Fiber System
INTERLOGIX
PR14961V2-34019.eps
The S706V and S7706V fiber links accept analog baseband video, convert it to digital
and transmit it as an 8-bit digital signal over optical fiber. Digital transmission of
video with a signal-to-noise ratio of >60 dB assures noise-free video at the receiver.
The S706V and S7706V support all major video formats. Resolution of greater than
520 TV lines guarantees faithful reproduction of high-resolution closed-circuit video
images. The S706V and S7706 meet or exceed the requirements of the EIA/TIA 250C
Medium Haul Standard. The S706V and S7706V also feature Interlogix's unique
SMARTS Technology.
FEATURES
• 8-bit digital video transmission
• 520 TV lines resolution
• Meets/exceeds EIA/TIA 250C Medium Haul Standard
• SMARTS built-in diagnostics
• Optical budget: 13 dB MM; 18 dB SM
• Operates up to 37 mi (60 km)
• Solid-state short-circuit protection
• 24 V AC/13.5 V DC transmitter power
Anixter No. Vendor No.
Description
340331
S706VT-ESTL
Multimode 1-fiber link, transmitter
273612
S706VR-ESTL
Multimode 1-fiber link, receiver
342202
S7706VT-EST
Single-mode 1310 nm 1-fiber
link, transmitter
273613
S7706VR-EST
Single-mode 1310 nm 1-fiber
link, receiver
Fiber;Video Multiplexer/3278
Index 1.Networking Systems//Video Products//Video Security Systems
S708V/S7708V 8-channel Digital Video Multiplexer System
INTERLOGIX
The S708V/S7708V Digital Video Multiplexer system uses revolutionary CWDM
technology to provide simultaneous long-range transmission of multiple full-frame,
real-time video signals over one multimode fiber. The eight-channel system features a
bandwidth of 6.2 MHz per channel and optical automatic gain control (OAGC). It
accepts analog baseband input signals and converts them to digital format for
transmission, assuring high-quality video outputs at the receiver. Interlogix's unique
SMARTS Technology includes a built-in video test-pattern generator on the transmitter
for system setup and onscreen diagnostics to indicate insufficient optical power or
an inactive video channel for each output.
FEATURES
• Eight video channels on a single fiber
• Digital multiplexing technology
• 10-bit digital encoding
• 500 TV lines resolution
• Color or monochrome
• SMARTS diagnostics
• Optical automatic gain control
• Solid-state short-circuit protection
Request the latest literature and guides from Anixter.
6.26
PR14962V2-33991.eps
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 27 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Interlogix
(continued)
S708V/S7708V 8-channel Digital Video
Multiplexer System
Anixter No.
252919
Vendor No.
S708VT-EST
273609
S708VR-EST
340333
S708VT-ESTL
273610
S708VR-ESTL
342206
S7708VT-EST
273611
S7708VR-EST
Description
Multimode, 1-fiber link,
850/1300 nm, transmitter
Multimode, 1-fiber link,
850/1300 nm, receiver
Multimode, 1-fiber link,
1310/1330 nm, transmitter
Multimode, 1-fiber link,
1310/1330 nm, receiver
Single-mode, 1-fiber link,
1310/1550 nm, transmitter
Single-mode, 1-fiber link,
1310/1550 nm, receiver
Fiber;Video Multiplexer/11016
Index1.Networking Systems//Video Products//Video Security Systems
INTERLOGIX
PR14963V2-34005.eps
The S707V Video Multiplexer System represents a technological breakthrough in the
simultaneous transmission of multiple full-frame, real-time video signals (color or
monochrome) over one multimode or single-mode fiber. The 4-channel system
features a 6.2 MHz per-channel bandwidth and optical automatic gain control
(OAGC). It accepts analog baseband inputs and converts them to digital format for
transmission, assuring high-quality video outputs at the receiver. The system is
compatible with all major formats.
Interlogix's unique SMARTS Diagnostics includes a built-in video test-pattern generator
on the transmitter for system setup and onscreen diagnostics to indicate insufficient
optical power or an inactive video channel for each output.
FEATURES
• Four channels of one-way video
• Digital multiplexing technology
• SMARTS diagnostics
• 500 TV lines resolution
• Optical automatic gain control (OAGC)
• Supports all major video formats
• Solid-state circuit protection
• Hot-swappable rack cards
Anixter No. Vendor No.
Description
258668
S707VT-ESTL
Transmitter
258669
S707VR-ESTL
Receiver
Index 1.Networking Systems//Video Products//Video Security Systems
S710D Universal Data System
INTERLOGIX
PR14964V2-34016.eps
The S710D is a member of Interlogix's revolutionary family of multiprotocol data
links. This one link handles all major data formats in both directions, including
SensorNet. It is not necessary to order or stock different models to support different
data formats. They're all in one unit. Configure the S710D as needed for the job, and
even better if the installation changes data formats, just reconfigure the S710D.
The use of state-of-the-art digital technology throughout the S710D makes it possible
to build in more diagnostic functions than previously possible.
In addition, the integrity of the data paths can be tested with a built-in data
transmission test-pattern generator. It is not necessary to connect to an external data
device. The S710D also features the very valuable data-translation function that
allows input of one data format and output of a different format.
FEATURES
• All-in-one data: RS-232, RS-422, RS-485 Manchester, Biphase, TTL
• User-configurable data format
• Unique data translation function
• Optical budget 13 dB
• Optical automatic gain control (OAGC)
• Enhanced built-in diagnostics
• MTBF > 100,000 hours
Anixter No. Vendor No.
Description
231564
S710D-RST2
2-fiber link transmits using 850 nm
Fiber;Video Module/11020
Index 1.Networking Systems//Video Products//Video Security Systems
S712D Universal Data Repeater
INTERLOGIX
PR14965V2-34009.eps
The S712D Universal Data Repeater is part of Interlogix's revolutionary family of
multiprotocol data links. This model series adds four new data functions to the
Interlogix line: (1) It acts as a repeater to extend the operation distance of an S711D
or S712D system; (2) It provides drop-and-insert capability to a linear data system
with up to 32 nodes; (3) It can be configured as a redundant point-to-point system;
(4) It can be configured as a self-healing ring with up to 32 nodes.
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.27
Video Transmission and Wireless
S707V 4-channel Digital Video Multiplexer
Fiber;Video System/11021
Revise - Sec06 Video Transmission and Wireless.fm Page 28 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Interlogix
Video Transmission and Wireless
Like the other members of the Universal Data family, this link handles all major data
formats in both directions. It is not necessary to order or stock different models to
support different data formats. The S712D also features the very valuable data
translation function that allows input of one data format and output of a
different format.
The S712D has extensive built-in diagnostics, including a self-test data generator that
makes it possible to test a link without having to connect external data equipment.
FEATURES
• All-in-one data: RS-232, RS-422, RS-485, Manchester, Biphase, TTL
• Field-configurable data format
• Drop-and-insert repeater function
• Self-healing ring capability
• Redundant point-to-point capability
• Unique data translation function
• Standard optical budget 18 dB; higher budgets available
Anixter No. Vendor No.
Description
231565
S712D-EST2
850 and 1300 nm
• Relay/contact closures - four forward channels
• SMARTS diagnostics
• 24 V AC/13.5 V DC transmitter power
Anixter No. Vendor No.
Description
342209
S734DVT-EST1
Multimode, 1-fiber link,
850/1300 nm, transmitter
273582
S734DVR-EST1
Multimode, 1-fiber link,
850/1300 nm, receiver
342210
S7734DVT-EST1
Single-mode, 1-fiber link,
1310/1550 nm, transmitter
273583
S7734DVR-EST1
Single-mode, 1-fiber link,
1310/1550 nm, receiver
Fiber;Video Module/11025
Index 1.Networking Systems//Video Products//Video Security Systems
S739DV Video with Universal Up-the-Coax Control,
Response and Genlock
INTERLOGIX
PR14967V2-33999.eps
Fiber;Video Module/3016
Index1.Networking Systems//Video Products//Video Security Systems
S734DV/S7734DV 4-channel Video and 2-way Universal
Data Fiber Module
INTERLOGIX
PR14966V2-34012.eps
D
The S734DV and S7734DV Video Multiplexers provides four channels of video
transmission combined with two-way universal data. The S734DV and S7734DV
convert four channels of analog baseband composite video to digital format for
transmission over fiber. Digital transmission of the video assures clean, noise-free
video at the receiver. Two-way data permits remote control of a PTZ response from the
receiver/driver to the control center. The unique Multiprotocol Data design accepts all
major data formats, including SensorNet. The S734DV also features the very valuable
data-translation function that allows input of one data format and output of a
different format. Four relay/contact closure channels in the forward direction permit
transmission of switch closures. SMARTS diagnostic technology provides an extensive
array of diagnostic LEDs and onscreen monitor displays.
FEATURES
• Four channels of one-way video
• 10-bit digital encoding
• 500 TV lines resolution
• Multiprotocol data: RS-232, RS-422, RS-485, Manchester, Biphase,
TTL, SensorNet
• User-configurable data format
• Unique data translation function
The S739DV Video and Control Data System represents a major advance in fiber optic
links for Up-the-Coax control systems. In Up-the-Coax systems, video is transmitted
from the camera back to the control center over coaxial cable, and control signals to
operate the pan/tilt/zoom (PTZ) functions are transmitted from the control station out
to the receiver/driver at the camera station. In addition to video and control, the
S739DV provides for the transmission of response signals from the camera station to
the control station. The S739DV also provides for transmission of embedded genlock
sync if genlocking is a feature of the particular control system used. The S739DV
works with all major brands of Up-the-Coax systems. The S739DV also features more
extensive LED diagnostics than ever before, with input/output indicators for video,
command, response, genlock sync and optical signal strength.
FEATURES
• Transmits video, control, response, and embedded genlock signals
• 1- or 2-fiber links available
• Compatible with all major Up-the-Coax control systems, including: American
Dynamics, Baxall, Burle, Elbex, Panasonic, Pelco, Robot, Sensormatic, VCS
format, Vicon, Videolarm and others
• Diagnostic LEDs for video, command, response, sync, and optical signals on
both Tx and Rx
• Operating distances up to 11 miles/18 km (control system specific)
• Built-in optical automatic gain control (OAGC)
• Modern, heavy-duty housing design
Anixter No. Vendor No.
Description
231572
S739DVT-EST1
Transmitter
231574
S739DVR-EST1
Receiver
Request the latest literature and guides from Anixter.
6.28
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 29 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Interlogix
Fiber;Video System/11014
Index1.Networking Systems//Video Products//Video Security Systems
B705V Composite Video Broadcast-quality Fiber Transmission System
Fiber;Video System/11015
Index1.Networking Systems//Video Products//Video Security Systems
B7705V Composite Video Broadcast-quality Fiber
Transmission System
INTERLOGIX
The B7705V high-performance broadcast-grade fiber transmission link supports
composite video (NTSC or PAL). The all-digital processing platform features 10-bit
video processing. This advanced design enables the B7705V to exceed
RS-250 short-haul video performance as specified in the EIA 250C standard. The
B7705V is designed to operate over 8.3/125 µm single-mode fiber. The B7705V also
features a variety of built-in diagnostic functions, including LED displays for input
video, output video and received optical signal strength. In addition, the receiver
monitors the received optical signal with its patented Level/Loss indicator. The
B7705V Series consists of a transmitter (B7705VT) and receiver (B7705VR). The
series is available in both stand-alone units and rack cards for use in the
515R1/517R1 rack-mount card cages. For applications specifying multimode fiber,
refer to the B705V series.
FEATURES
• 10-bit A/D video processing
• Exceeds EIA-250C short-haul video standard
• Video bandwidth - 7.5 MHz
• Video signal-to-noise ratio > 67 dB
• Operates up to 30 km (18.75 miles)
• Hot-swappable rack cards
Description
Transmitter
Receiver
Fiber;Video Module/11013
Index 1.Networking Systems//Video Products//Video Security Systems
B703V S-Video Pro A/V Fiber Transmission Link
INTERLOGIX
PR14968V2-33995.eps
The B703V high-performance fiber transmission system supports the luminance and
chrominance signals used in pro A/V S-Video systems. The FM modulated signal paths
maintain the timing relationships required to operate S-Video-based equipment over
distances beyond the capability of coax cable. The standard B703V model operates at
a wavelength of 850 nms, providing operation up to 3 km. The long-distance version
operates at 1300 nms and offers a fiber solution up to 10 km. The B703V utilizes the
S-Video DIN connector for easy interconnection. The transmitter is available as a
compact 4 x 4 unit or as a circuit card designed to plug into the 19 in. rack-mount
card cage assembly. Status indicators for the Y and C signal are provided on the
transmitter and receiver to monitor signal level. In addition, the received optical
signal is continuously displayed using the Level/Loss indicator on the receiver card.
FEATURES
• Y/C component video
• 8 MHz
• FM modulation
• S-Video DIN input/output connectors
• Optical automatic gain control (OAGC)
• Multimode fiber
• Standard optical budget 13 dB at 850 nm
• Optional optical budget 13 dB at 1300 nm
• Diagnostic indicators
Anixter No. Vendor No.
Description
240619
B703VT-EST
Transmitter
240620
B703VR-EST
Receiver
Fiber;Video Module/11012
Index 1.Networking Systems//Video Products//Video Security Systems
B720A/B7720A Single-channel Audio Fiber Modules
INTERLOGIX
The B720A/B7720A high-performance fiber transmission system supports one
channel of high-quality audio (HQA). The all-digital processing platform features
24-bit audio processing and a 33 kHz audio-sampling rate.
The optical transmission system can operate at 850 or 1300 nm over multimode fiber,
or at 1310 or 1550 nm over single-mode fiber.
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.29
Video Transmission and Wireless
INTERLOGIX
The B705V high-performance broadcast-grade fiber transmission link supports
composite video (NTSC or PAL). The all-digital processing platform features 10-bit
video processing. This advanced design enables the B705V to exceed
RS-250 short-haul video performance as specified in the EIA 250C standard. The
B705V is designed to operate over 50/125 µm or 62.5/125 µm multimode fiber. The
B705V also features a variety of built-in diagnostic functions, including LED displays
for input video, output video and received optical signal strength. In addition, the
receiver monitors the received optical signal with its patented Level/Loss indicator.
The B705V Series consists of a transmitter (B705VT) and receiver (B705VR). The
series is available in both stand-alone units and rack cards for use in the
515R1/517R1 rack-mount card cages. For applications specifying single-mode fiber,
refer to the B7705V series.
FEATURES
• 10-bit A/D video processing
• Exceeds EIA-250C short-haul video standard
• Video bandwidth - 7.5 MHz
• Video signal-to-noise ratio > 67 dB
• Operates up to 2.5 miles (4 km)
• Hot-swappable rack cards
• Multimode (50 or 62.5 µm)
• Built-in diagnostics
Anixter No. Vendor No.
Description
240623
B705VT-ESTL
Transmitter
240624
B705VR-ESTL
Receiver
• Single-mode fiber
• Built-in diagnostics
Anixter No. Vendor No.
240621
B7705VT-EST
240622
B7705VR-EST
Revise - Sec06 Video Transmission and Wireless.fm Page 30 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Interlogix
FEATURES
• Single-channel audio over one fiber
• 24-bit A/D audio processing
• Signal-to-noise ratio 70 dB
• Balanced or unbalanced audio
• 33 kHz audio sampling rate
• Standard 13 dB optical budget
• Diagnostics indicators: Level/Loss, audio input and audio output
Anixter No. Vendor No.
Description
273639
B7720AT-EFC
Single-mode transmitter
Fiber;Video Module/3277
Index1.Networking Systems//Video Products//Video Security Systems
S711D/S7711D Fiber Data Link
Video Transmission and Wireless
INTERLOGIX
PR14970V2-33971.eps
The S711D multimode link and S7711D single-mode link handle all major data
formats in both directions, including SensorNet. It is not necessary to order or stock
different models to Dsupport different data formats. If an installation changes data
formats, simply reconfigure the S711D or S7711D. The use of state-of-the-art digital
technology throughout the S711D and S7711D includes Interlogix's unique SMARTS
technology, providing more diagnostic functions than previously possible. In addition,
the integrity of the data paths can be tested with a built-in data transmission
test-pattern generator. It is not necessary to hook up a data source to test the link.
The S711D and S7711D also feature the very valuable data-translation function that
allows input of one data format and output of a different format.
FEATURES
• Multiprotocol data: RS-232, RS-422, RS-485
• Manchester, Biphase, TTL, SensorNet
• User-configurable data format
• Unique data translation function
• SMARTS diagnostics
• Optical budget 18 dB
• Hot-swappable
• Solid-state circuit protection
• Forever Warranty
Anixter No. Vendor No.
Description
342211
S711DT-EST1
Multimode, 1-fiber link,
850/1300 nm, transmitter
273603
S711DR-EST1
Multimode, 1-fiber link,
850/1300 nm, receiver
342212
S7711DT-EST1
Single-mode, 1-fiber link,
1310/1550 nm, transmitter
273606
S7711DR-EST1
Single-mode, 1-fiber link,
1310/1550 nm, receiver
Fiber;Video Module/3275
Index 1.Networking Systems//Video Products//Video Security Systems
S731DV/S7731DV Fiber Video and Data Link
INTERLOGIX
The S731DV/S7731DV Fiber Video and Data Link provides digital transmission of
video and return multiprotocol data. The link converts analog baseband composite
video to 8-bit digital format for transmission over fiber. The S731DV and S7731DV
support all major video formats. Return data permits remote control of a PTZ at the
camera station. The unique multiprotocol data design accepts all major data formats.
This allows the S731DV/S7731DV to be retained if there is a change of video-control
systems. The unit also features the very valuable data-translation function that
allows input of one data format and output of a different format. Relay/contact
closure is supported from the camera station to the control station. SMARTS
diagnostic technology provides extensive built-in system diagnostic tools, including
diagnostic LEDs and onscreen monitors.
FEATURES
• 8-bit digital video transmission
• 520 TV lines resolution
• Multiprotocol data: RS-232, RS-422, RS-485, Manchester, Biphase, TTL and
DTMF/FSK control signals
• SMARTS diagnostics
• 24 V AC/13.5 V DC transmitter power
• Unique data translation function
• User-configurable data format
• Relay/contact closure
Anixter No. Vendor No.
Description
273590
S731DVT-EST1
Multimode, 1-fiber link,
850/1300 nm, transmitter
342213
S731DVR-EST1
Multimode, 1-fiber link,
850/1300 nm, receiver
273592
S731DVT-EST2
Multimode, 2-fiber link,
850 nm, transmitter
342215
S731DVR-EST2
Multimode, 2-fiber link, 850 nm, receiver
273594
S7731DVT-EST1
Single-mode, 1-fiber link,
1310/1550 nm, transmitter
342214
S7731DVR-EST1
Single-mode, 1-fiber link,
1310/1550 nm, receiver
273595
S7731DVT-EST2
Single-mode, 2-fiber link,
1310 nm, transmitter
342217
S7731DVR-EST2
Single-mode, 2-fiber link,
1310 nm, receiver
Request the latest literature and guides from Anixter.
6.30
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 31 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Interlogix
Fiber;Video Module/3274
Index1.Networking Systems//Video Products//Video Security Systems
S732DV/S7732DV Video and Multiprotocol Data Fiber Link
INTERLOGIX
The S732DV/S7732DV fiber link converts analog video to digital video and supports
two-way transmission of all major data formats. It is not necessary to order or stock
different models to support different data formats. Digital transmission of the video
component along with a signal-to-noise ratio of > 55 dB assures clean, noise-free
video at the receiver. Moreover, this link supports all major video formats. The data
functions include the unique data-translation feature, which allows one data format
to be input and a different data format to be output. Interlogix's unique SMARTS
diagnostic technology provides an extensive set of built-in diagnostic tools including
a video test-pattern generator that allows failures to be diagnosed from the monitor.
Fiber;Video, Audio Module/11018
Index 1.Networking Systems//Video Products//Video Security Systems
B746AV Two-way Video and Audio
INTERLOGIX
The units in this series transmit composite video and audio signals bi-directionally
over a single fiber. The 131B is ideally suited for interactive video and
teleconferencing systems such as those used in remote arraignment proceedings. A
complete system consists of a transmitter and a receiver.
The system has five status indicators: Level/Loss, video in, video out, audio in and
audio out, which greatly ease installation by providing a quick visual indication of
system operation.
FEATURES
• Two-way transmission, one fiber
• Video bandwidth 10 Hz to 8 MHz
• Audio bandwidth 20 Hz to 20 kHz
• Multimode fiber
• Multistandard: NTSC, PAL or SECAM
• Balanced or unbalanced 600-ohm audio
• Optical AGC circuitry
• Diagnostic indicators: Level/Loss, video and audio
• Differential gain 1.5%; phase 1.5%
• THD < 1%
• SNR 55 dB for video, 56 dB for audio
• ST optical ports
• Rack cards or stand-alone units
Anixter No. Vendor No.
Description
220504
131B-T
Two-way video and audio transmitter
220505
131B-R
Two-way video and audio receiver
Fiber;Video, Audio Module/11022
Index1.Networking Systems//Video Products//Video Security Systems
B740AV Video and Audio Transceivers
INTERLOGIX
The 241B system supports simultaneous transmission of broadcast-quality video and
audio signals over a single optical fiber providing superior performance and
reliability for the most demanding applications. These systems include a
video-presence indicator and audio-level indicator on the transmitter, and a
Level/Loss indicator on the receiver. These LEDs greatly ease installation of the
modules by providing a quick visual indication of system operation.
FEATURES
• One-way video and audio over a single fiber
• Video bandwidth 10 Hz to 8 MHz
• Audio bandwidth 20 Hz to 20 kHz
• For multimode fiber
• Multistandard - NTSC, PAL or SECAM
• Balanced or unbalanced 600 ohm audio
• Optical AGC circuitry
Fiber;Video, Audio Module/11019
Index 1.Networking Systems//Video Products//Video Security Systems
S768DAV Two-way Video, Audio and Data
INTERLOGIX
The links that compose this group offer the user the most versatile choice of
combinations. In each instance these systems support two-way transmission of
high-quality video, audio and data. RS-232, RS-422, TTL or contact closure/relay
control data may be specified as all of these formats are supported. The option of
two-fiber transmission provides broadcast-grade video in both directions. The 245B
series is an ideal choice for both teleconferencing and camera systems requiring
two-way audio and data in addition to video.
FEATURES
• Two-way transmission over one fiber
• Video bandwidth 10 Hz to 8 MHz
• Audio bandwidth 20 Hz to 20 kHz
• Supports RS-232, RS-422, TTL or relay/contact closure data formats
• Differential gain 1.5% and phase 1.5%
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.31
Video Transmission and Wireless
FEATURES
• 8-bit digital video transmission
• 520 TV lines resolution
• SMARTS diagnostics
• Multiprotocol data: RS-232, RS-422, RS-485, Manchester, Biphase, TTL,
SensorNet and DTMF/FSK control signals
• Unique data translation function
• User-configurable data format
Anixter No. Vendor No.
Description
273585
S732DVT-EST1
Multimode, 1-fiber link,
850/1300 nm, transmitter
342219
S732DVR-EST1
Multimode, 1-fiber link,
850/1300 nm, receiver
273586
S732DVT-EST2
Multimode, 2-fiber link,
850 nm, transmitter
342220
S732DVR-EST2
Multimode, 2-fiber link, 850 nm, receiver
342224
S7732DVT-EST1
Single-mode, 1-fiber link,
1310/1550 nm, transmitter
342225
S7732DVR-EST1
Single-mode, 1-fiber link,
1310/1550 nm, receiver
273588
S7732DVT-EST2
Single-mode, 2-fiber link,
1310 nm, transmitter
342222
S7732DVR-EST2
Single-mode, 2-fiber link,
1310 nm, receiver
• Diagnostic indicators: Level/Loss and video
• Differential gain < 1% and phase < 1%
• SNR 56 dB
• THD < 1%
• ST optical ports
• Rack cards or stand-alone units
Anixter No. Vendor No.
Description
220512
241B-T
Video and audio transmitter
220513
241B-R
Video and audio receiver
Revise - Sec06 Video Transmission and Wireless.fm Page 32 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Interlogix
• Data rate: 19.2 kbps
• THD < 1%; audio SNR 56 dB; video SNR 55 dB
• Balanced or unbalanced 600 ohm audio
• Optical AGC circuitry
• Diagnostic indicators: Level/Loss, audio, data and video
• Rack cards or stand-alone units
Anixter No. Vendor No.
Description
220508
245B-T
Two-way video, audio and data transmitter
220509
245B-R
Two-way video, audio and data receiver
Fiber;Video, Audio Module/3014
Index 1.Networking Systems//Video Products//Video Security Systems
S764DAV/S7764DAV One-way Video, Two-way Digital Audio, 2-channel
Data, 2-channel Contact Closure Fiber Module
INTERLOGIX
PR14974V2-33994.eps
Fiber;Video, Audio Module/11023
Index1.Networking Systems//Video Products//Video Security Systems
B742AV Video and 2-channel Audio
Video Transmission and Wireless
INTERLOGIX
PR14973V2-33968.eps
The B742AV high-performance broadcast-grade fiber transmission system supports
composite video and two channels of line-level audio. The all-digital processing
platform features 10-bit video processing coupled with 24-bit dual channel audio
processing. This advanced
design enables the B742AV to exceed RS250C short-haul
D
video performance as specified in the EIA-250C standard.
Dual 10-segment LED displays provide for complete monitoring of transmitter and
receiver operation. Signals monitored include input video, output video, audio input
and audio output levels and the received optical signal. For added flexibility dual range
audio levels for the two audio channels can be configured for (-10 dB to +8 dB) or
(0 dB to +18 dB) operation. Balanced 600 ohm, hi-Z or unbalanced operation for
input audio. The audio output stage will drive balanced 600 ohm audio, balanced hi-Z,
and unbalanced hi-Z audio loads. The optical transmission system operates at
1300 nm over 62.5 µm multimode fiber. At 1300 nm, transmission distances up to
6 km (3.7 miles) are possible. The front-panel LED display when switched to the test
mode on the receiver has the capability to display the received optical level. This
built-in test feature aids in the installation process as it easily measures the actual
optical loss in the fiber run from the transmitter.
FEATURES
• 10-bit A/D video processing
• Exceeds EIA-250C short-haul video standard
• Video bandwidth - 7.5 MHz
• Video signal-to-noise ratio > 67 dB
• 24-bit A/D audio processing
• Audio frequency response - 20 - 20 kHz
• Audio SNR > 90 dB, THD < 0.003%
• Balanced or unbalanced audio
• Built-in audio 1.5 kHz test generator
• Multimode fiber
• Optical budget 13 dB at 1300 nm
Anixter No. Vendor No.
Description
319231
B742AVR-RSTL
Receiver
319221
B742AVT-RSTL
Transmitter
The S764DAV/S7764DAV fiber link provides one-way digital video transmission
combined with two-way 2-channel digital audio, 2-channel multiprotocol data and
2-channel contact closures. Digital processing of the video signal along with a video
signal-to-noise ratio of > 60 dB assures clean, noise-free video at the receiver.
Digital processing of the audio signal along with an audio signal-to-noise ratio of
> 90 dB allows the audio output to drive balanced or unbalanced loads and
maintain constant audio levels. The data functions include the unique
data-translation feature, which allows one data format to be input and a different
data format to be output. Interlogix's unique SMARTS diagnostic technology provides
an extensive set of built-in diagnostic tools including a video test-pattern generator
that allows failures to be diagnosed from the monitor, and LED displays for
monitoring video, data, audio, contact and optical signal.
FEATURES
• One-way video and two-way audio/data transmission over one or two fibers
• 9-bit A/D video processing, 24-bit A/D audio processing
• Multiprotocol data: RS-232, RS-422, RS-485, Manchester, Biphase, TTL
and SensorNet
• Unique data translation function
• Local or remote user-configurable data format
Anixter No. Vendor No.
Description
273573
S764DAVT-RST1
Multimode, 1-fiber link,
850/1300 nm, transmitter
342226
S764DAVR-RST1
Multimode, 1-fiber link,
850/1300 nm, receiver
273574
S764DAVT-RST2L Multimode, 2-fiber link,
1310 nm, transmitter
342227
S764DAVR-RST2L Multimode, 2-fiber link, 1310 nm, receiver
273575
S7764DAVT-RST1 Single-mode, 1-fiber link,
1310/1550 nm, transmitter
342228
S7764DAVR-RST1 Single-mode, 1-fiber link,
1310/1550 nm, receiver
273576
S7764DAVT-RST2 Single-mode, 2-fiber link,
1310 nm, transmitter
342229
S7764DAVR-RST2 Single-mode, 2-fiber link,
1310 nm, receiver
Request the latest literature and guides from Anixter.
6.32
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 33 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Interlogix
Fiber;Video, Audio Module/3015
Fiber;Video, Audio Module/3284
Index1.Networking Systems//Video Products//Video Security Systems
Index 1.Networking Systems//Video Products//Video Security Systems
S751DA/S7751DA Two-way Audio, Multiprotocol Data and
Contact Closure Fiber Module
INTERLOGIX
Fiber Optic Accessories
INTERLOGIX
PR14976V2-34007.eps
PR14975V2-33985.eps
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.33
Video Transmission and Wireless
The S751DA/S7751DA fiber link provides two-way transmission of high-quality audio
(HQA), multiprotocol data (MPD) and contact closure. Digital processing of the audio
signal along with an audio signal-to-noise ratio of > 90 dB allows the audio output
to drive balanced or unbalanced loads and maintain constant audio levels. The data
functions include the unique data-translation feature, which allows one data format
to be input and a different data format to be output. The Interlogix SMARTS diagnostic
technology provides an extensive set of built-in diagnostic LEDs for monitoring audio,
optical signal and data.
FEATURES
• Two-way transmission over one or two fibers
• 24-bit A/D audio processing
• Multiprotocol data: RS-232, RS-422, RS-485, Manchester, Biphase, TTL
and SensorNet
• Unique data translation function
• Local or remote user-configurable data format
• Relay/contact closure - one duplex channel closure
• SMARTS diagnostics
Anixter No. Vendor No.
Description
273578
S751DAT-RST1
Multimode, 1-fiber link,
850/1310 nm, transmitter
342340
S751DAR-RST1
Multimode, 1-fiber link,
850/1310 nm, receiver
273579
S751DAT-RST2L
Multimode, 2-fiber link,
1310 nm, transmitter
342341
S751DAR-RST2L
Multimode, 2-fiber link, 1310 nm, receiver
273580
S7751DAT-RST1
Single-mode, 1-fiber link,
1310/1550 nm, transmitter
342343
S7751DAR-RST1
Single-mode, 1-fiber link,
1310/1550 nm, receiver
Interlogix offers a full line of card cage racks and enclosures to support its fiber optic
transmission systems. The compact 515R1 and 517R1 card cage racks provide
high-density racking for link modules. They mount in standard 19 in. (483 mm)
instrument racks. The 515R1 includes an internal power supply and accommodates
15 1 in. cards or the equivalent of 1, 2 and 3 in. cards. The 517R1 uses an external
power supply and accommodates 17 1 in. cards or the equivalent. The 503H offers
very compact 19 in. EIA rack mounting for three 1 in. rack cards. The 501R, 502R and
503R stand-alone enclosures permit local stand-alone mounting of models that are
normally available as rack cards.
FEATURES
• Card cage racks for EIA consoles
• Stand-alone enclosures for rack cards
• 515R1 and 517R1 racks accommodate redundant power supplies
• 515PS1 and 517EPS1 have fiber fail and output level alarms
• Stand-alone enclosures permit local installation of rack card models
• 501R, 502R, 503R enclosures accommodate 1, 2 and 3 in. rack cards
Anixter No. Vendor No.
Description
273624
503H
Rack, horizontal, 1 RU
252922
515R1
Rack, vertical, 2 RU
273627
517R1
Rack, vertical, 3 RU
319304
517EPS1
Rack, horizontal, 1 RU
273628
501R
Enclosure, one slot
273630
502R
Enclosure, two slots
Revise - Sec06 Video Transmission and Wireless.fm Page 34 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Interlogix
Fiber;Data/3276
Fiber;Module, Power Supply/3288
Index1.Networking Systems//Video Products//Video Security Systems
Index 1.Networking Systems//Video Products//Video Security Systems
S714D/S7714D Fiber Fast Ethernet System
Video Transmission and Wireless
INTERLOGIX
Power Supplies for Fiber Modules
PR14977V2-33972.eps
The S714D provides fiber optic transmission of 100BASE-T Fast Ethernet data or
10BASE-T Ethernet data over distances up to 28 mi. (45 km). The S714D combines the
benefits of Interlogix’s advanced engineering with the highest-quality standards in
the industry. The S714D makes it possible to add the security and efficiency of
transmission over fiber to local area networks (LANs) and other Ethernet
applications. Interlogix’s unique SMARTS (Status Monitoring And Reliability Test
System) technology provides constant monitoring of the link and the equipment
connected to it. The status of the link and the system can be determined at a glance
without the use of expensive test equipment. Stand-alone modules are housed in a
rugged steel enclosure with a convenient, secure wall-mounting system.
FEATURES
• Supports 100BASE-T Fast Ethernet and 10BASE-T Ethernet protocols
• Multimode or single-mode
D
• Automatic polarity
correction
• Switch-selectable crossover
• Optical budget 13 dB
• Optical automatic gain control (OAGC)
• SMARTS diagnostics
Anixter No. Vendor No.
Description
273597
S714DT-EST1
Multimode, 1-fiber link,
850/1300 nm, transmitter
342350
S714DR-EST1
Multimode, 1-fiber link,
850/1300 nm, receiver
273598
S714D-EST2
Multimode, 2-fiber link,
850 nm, transceiver
273599
S714D-EST2L
Multimode, 2-fiber link,
1300 nm, transceiver
273600
S7714DT-EST1
Single-mode, 1-fiber link,
1310/1550 nm, transmitter
342354
S7714DR-EST1
Single-mode, 1-fiber link,
1310/1550 nm, receiver
273601
S7714D-EST2
Single-mode, 2-fiber link,
1310 nm, transceiver
INTERLOGIX
The 600P series power supplies are designed to supply low-voltage power for
Interlogix’s stand-alone modules. Models are available with either AC or DC outputs.
The 610P plugs directly into a wall outlet, while the other models all have input power
cables with attached plugs. The 613P and 614P have detachable power cables and
may be used with input voltages from 100 V AC to 240 V AC.
FEATURES
• Low-voltage outputs
• Models with AC or DC output
• Models for North American and international applications
• All have appropriate safety ratings
Anixter No. Vendor No.
Description
252923
613P
DC 110-240 in, 13.5 V DC @
1.7 amp out
273642
614P
DC 110-240 in, 13.5 V DC @
2.3 amp out
Request the latest literature and guides from Anixter.
6.34
PR14978V2-33992.eps
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 35 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
ComNet
./Ethernet;Switches/17176
Ethernet;Switches/17177
Index1.Networking Systems//Video Products//Video Security Systems
Index 1.Networking Systems//Video Products//Video Security Systems
ComPak Fiber Optic and Ethernet Transmission Products
COMNET
PR28466V2-209157.eps
ComNet 10- to 24-Port Ethernet Switches with
Power over Ethernet (PoE)
COMNET
The ComNet CNGE2FE8MSPOE Managed Ethernet Switch provides transmission of
(eight) 10/100 BASE-TX and (two) 10/100/1000TX or 100/1000FX combo ports. The
ComNet CNGE2FE24MSPOE Managed Ethernet Switch provides transmission of (24)
10/100 BASE- TX and (2) 10/100/1000TX or 1000FX combo ports. The electrical ports
support the 10/100 Mbps Ethernet IEEE 802.3 protocol and the PoE ports support
IEEE 802.3af based PoE. The switches include auto-negotiating and auto-MDI/MDIX
features that ensure simplicity and ease of installation. The PoE ports support IEEE
802.3af based PoE. These environmentally hardened switches are designed for direct
deployment in difficult, unconditioned out-of-plant and roadside installations, and
are available for use with either conventional Cat 5e copper or optical transmission
media. Two ports on each switch are 10/100/1000 configurable for copper or fiber
media for use with multimode or single-mode optical fiber by using sold-separately
small-form-factor pluggable modules (SFP). ComNet products are made in the USA,
have a lifetime guarantee and are available to purchase under GSA contract.
FEATURES
• Support IEEE 802.3af-based POE
• Environmentally hardened for direct deployment in difficult unconditioned
out-of-plant and roadside installations
• Meets NEMA TS-1/TS-2 and Caltrans Specifications
• Extended ambient operating temperature range: -40°C to +75°C
• 10/100 BASE-TX and 1000 BASE-FX compatible
• Flexible optics configuration via SFP plug-in modules
• Fully configurable through Web-based or SNMP network management
• IGMP Snooping V1/V2 for multicast filtering and IGMP Query V1/V2
• Port-based VLAN (IEEE 802.1Q)
• Rapid Spanning Tree protocol (IEEE 802.1W)
• Port-based security
• Lifetime warranty
Anixter No. Vendor No.
Description
420754
CNGE2FE8MSPOE 10-port managed Ethernet switch with PoE
420756
CNGE2FE24MSPOE 26-port managed Ethernet switch with PoE
Continued on next page >>
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.35
Video Transmission and Wireless
The ComNet ComPak Convenience packs are a convenient pairing of a transmitter and
receiver plus power supplies in one package with a single model number. ComNet
identified the most in-demand products and is offering them in a cost-saving
package available through distribution. ComNet products are made in the USA, have a
lifetime guarantee and are available to purchase under GSA contract.
FEATURES
• ComPak11M Video Transmitter and Receiver
• ComPak1031M1 Video with Bi-Directional Data Transmitter and Receiver
• ComPak41M1 4-Channel Video Transmitter and Receiver
• ComPak412M1 4-Channel Video with Two Bi-Directional Data Channels
Transmitter and Receiver
• ComPak81M1 8-Channel Video Transmitter and Receiver
• ComPak812M1 8-Channel Video with Two Bi-Directional Data Channels
Transmitter and Receiver
• ComPak1002MAC1M 10/100 Mbps Ethernet 2 Port Media Converter
• ComPak-EOC Ethernet over Twisted Pair or Coaxial Cable Using VDSL2 (EoVDSL)
Anixter No. Vendor No.
Description
393988
COMPAK11M
Mini video transmitter/AGC mini
video receiver
420739
COMPAK1031M1
Video with bi-directional data
transmitter and receiver
420741
COMPAK41M1
4-channel video transmitter
and receiver
420744
COMPAK412M1
4-channel video with two bi-directional
data channels, transmitter and receiver
420747
COMPAK81M1
4-channel video with two bi-directional
data channels transmitter and receiver
420750
COMPAK812M1
4-channel video with two bi-directional
data channels transmitter and receiver
420751
COMPAK1002MAC1M 10/100 Mbps Ethernet 2-port
media converter
420753
COMPAK-EOC
Ethernet over twisted-pair or coaxial
cable using VDSL2 (EoVDSL)
PR28467V2-209146.eps
Revise - Sec06 Video Transmission and Wireless.fm Page 36 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
ComNet
Transmission;Converters/17179
Ethernet;Multiplexers/17180
Index1.Networking Systems//Video Products//Video Security Systems
Index 1.Networking Systems//Video Products//Video Security Systems
ComNet ValueLine RS-232/422 Point-to-Point Data Transceiver
COMNET
PR28468V2-209151.eps
ComNet ValueLine 4- and 8-channel Digitally Encoded Video
Multiplexers With and Without Data
Video Transmission and Wireless
COMNET
The ComNet ValueLine FDX50M2 and FDX51M2 data transceivers are interchangeable
by application and provide point-to-point transmission of simplex or duplex EIA
RS-232/RS422 data signals over two multimode optical fibers. The transceivers are
transparent to data encoding, allowing for broad-range compatibility. Plug-and-play
design ensures ease of installation requiring no electrical or optical adjustments.
Each transceiver incorporates a bi-color (red/green) indicating LED for monitoring
proper system operation. The FDX50 has a small footprint and is designed to be used
where space is a consideration. The FDX51 can be rack- or surface-mounted. ComNet
products are made in the USA, have a lifetime guarantee and are available to
purchase under GSA contract.
FEATURES
• Meets RS-232/422 specifications
• Distances up to 6 km (3.7 miles)
• Transparent toDdata encoding/compatible with major data protocols
• Point-to-point topology
• Meets NEMA TS-1/TS-2 and Caltrans Specifications
• Data rates up to 115 Kbps (NRZ)
• Voltage-transient protection on all power and signal input/output lines provides
unconditional protection from power surges and other voltage-transient events.
• Bi-color (red/green) transmit and receive LEDs
• NTCIP compatible
• Automatic resettable solid-state current limiters
• FDX50 is a compact-size module for surface mounting
• FDX51 is interchangeable between stand-alone or rack-mount use ComFit
• Lifetime warranty
Anixter No. Vendor No.
Description
420762
FDX50M2
ValueLine RS-232/422 point-to-point data
transceiver (small size)
420764
FDX51M2
ValueLine RS-232/422 point-to-point data
transceiver - stand-alone or rack-mount
The ComNet ValueLine video multiplexer units simultaneously transmit and receive
four channels (FVT41M1/FVR41M1) or eight channels (FVT81M1/FVR81M1) of video
over one optical fiber utilizing digital encoding for quality video transmission. This
line consists of models with and without two channels of RS-232, RS-422 and
RS-485 data (FVT412M1/FVR412M1, FVT812M1/FVR812M1). These hardened units
are ideal for use in unconditioned installations. These units are completely
transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera
systems. ComNet products are made in the USA, have a lifetime guarantee and are
available to purchase under GSA contract.
FEATURES
• Digitally encoded video transmission, transmits four or eight real-time color
video signals on one optical fiber
• Two channels of RS-232, -422 and RS-485 data additional data
channels available
• Compatible with all NTSC, PAL or SECAM CCTV camera systems
• Interchangeable between rack and stand-alone mounting
• NTCIP compatible
• Environmentally hardened
• Voltage-transient protection on all power and signal input/output lines
• Bi-color (red/green) LED status indicators
• Automatic resettable solid-state current limiters
• Lifetime warranty
Anixter No. Vendor No.
Description
394007
FVT41M1
4-channel video transmitter
394008
FVR41M1
4-channel video receiver
420765
FVT412M1
4-channel video transmitter with two
bi-directional data channels
420766
FVR412M1
4-channel video receiver with two
bi-directional data channels
420767
FVT81M1
8-channel video transmitter
420769
FVR81M1
8-channel video receiver
420770
FVT812M1
8-channel video transmitter with two
bi-directional data channels
420771
FVR812M1
8-channel video receiver with two
bi-directional data channels
Request the latest literature and guides from Anixter.
6.36
PR28469V2-209137.eps
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 37 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
ComNet
Media Converters;Fiber/17944
Ethernet;EoVDSL/17945
Index1.Networking Systems//Video Products//Video Security Systems
Index 1.Networking Systems//Video Products//Video Security Systems
10/100 Mbps Ethernet 2-port Media Converter Electrical to
SC/ST Optical with Power over Ethernet
COMNET
Power and Ethernet over Coaxial Cable
COMNET
PR34802V2-262082.eps
PR34801V2-262087.eps
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.37
Video Transmission and Wireless
The ComNet CWFE1003POE-M and CWFE1005POE-M 2-port media converters provide
full-duplex fiber optic transmission of a single channel of 10/100 Mbps Ethernet data
(10/100 BASE-TX) through multimode or single-mode optical fiber. Type SC or ST
optical connectors are available. These converters exceed the requirements of the
latest PoE standard (IEEE 802.3at). They provide full compliance as Power Sourcing
Equipment (PSE), with a maximum power availability of 30 watts in Mode A or Mode
B, making them ideal for those applications where the remote equipment draws
significant power. A higher output 60-watt model is available. The Ethernet electrical
interface auto-negotiates to either 10 or 100 Mbps without the need for any user
selection, and the optical interface operates at 100 Mbps (100FX). Packaged in a
rugged, compact-size housing. LED indicators confirm operating status. A power
supply providing 48 V DC at 1.5 A is provided with each converter. ComNet products
are made in the USA, and are available to purchase under GSA contract.
FEATURES
• Exceeds the latest PoE standard (IEEE 802.3at) for Power Sourcing Equipment
(PSE): Provides 30 watts in two modes at 48 V DC, for high-output-demand
applications of remote Ethernet equipment
• 60-watt higher output version available (CWFE100XPOEHO Series)
• SC or ST optical connectors available
• Five-year warranty
Anixter No. Vendor No.
Description
448466
CWFE1003POEM-M 2-port 10/100 Mbps ethernet media
converter with PoE-SC-MM
448467
CWFE1003POES-M 2-port 10/100 Mbps ethernet media
converter with PoE-SC-SM
448468
CWFE1005POEM-M 2-port 10/100 Mbps ethernet media
converter with PoE-ST-MM
448469
CWFE1005POES-M 2-port 10/100 Mbps ethernet media
converter with PoE-ST-SM
The ComNet CWFE1POCOAX Series transports Ethernet and camera/device operating
power between the remote device and headend location using existing 75 ohm
coaxial cable. It eliminates the need to have a separate power source at the remote
location and provides operating power for the remote ComNet modem and PoE device.
Based on the IEEE 802.3af standard for Power over Ethernet (PoE), the
CWFE1POCOAXA provides up to 15.4 watts of operating power to the remote PSE
device. The CWFE1POCOAXA transports Ethernet data at rates of up to 100 Mbps over
a distance of 230 meters (750 feet) over standard 75 ohm coaxial cable. The
CWFE1POCOAXA or CWFE2POCOAXA is used at the headend and the CWFE1POCOAXBM
is used at the remote location. ComNet products are made in the USA, and are
available to purchase under GSA contract.
FEATURES
• Supports transmission distances of up to 230 m (750 ft.) over coaxial cable
• Power over Coax source - meets IEEE 802.3af standard for PoE, 15 watts
• Ethernet data rates of 100 Mbps
• BNC connector for coaxial cable
• IEEE 802.3 compliant
• Made in the USA
• Power supply included
• Five-year warranty
Anixter No. Vendor No.
Description
448470
CWFE1P0C0AXA
Power over Coax; Power over
Ethernet (PoE)
448471
CWFE2POCOAXA
Dual Power over Coax; Power over
Ethernet (PoE)
448472
CWFE1POCOAXBM Power over Coax; Power over Ethernet
(PoE) remote
Revise - Sec06 Video Transmission and Wireless.fm Page 38 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Video Transmission and Wireless
ComNet
Switches;Ethernet/16028
Ethernet;Converters/17184
Index1.Networking Systems//Video Products//Video Security Systems
Index 1.Networking Systems//Video Products//Video Security Systems
ComNet CNGE3FE7MS Managed Ethernet Switch
ComNet ValueLine CNFE1MCM(M)(S) Media Converter
COMNET
COMNET
PR23285V2-162118.eps
The ComNet CNGE3FE7MS Managed Ethernet Switch is a hardened Ethernet switch
that transmits 10/100BASE-T, 100BASE-FX and 1000BASE-FX Ethernet data. Unlike
most Ethernet switches, these hardened units are designed for use in out-of-plant or
roadside operating environments, and are available for use with either conventional
Cat 5e copper or optical transmission media. Depending on the configuration
ordered, up to 10 electrical or up to three FX ports for optical transmission can be
utilized for easily implementing point-to-point, linear add-drop, drop-and-repeat,
star, or true self-healing ring and mesh network system architectures. The electrical
ports support the 10/100/1000 Mbps (10/100BASE-TX) Ethernet IEEE 802.3 protocol,
and auto-negotiating and auto-MDI/MDIX features are provided for simplicity and
ease of installation. Available for use with multimode or single-mode optical fiber,
selected by an optional SFP module, these network-managed Layer 2 switches are
optically (100BASE-FX) and electrically compatible with any IEEE 802.3-compliant
Ethernet devices. D
FEATURES
• Environmentally hardened for deployment in unconditioned installations
• Extended ambient operating temperature range: -40°C to +74°C
• 10/100BASE-TX and 10/100/1000BASE-FX-compatible
• Flexible optics configuration via SFP plug-in modules (Contact us for
specifications and pricing)
• DIN-rail or wall-mounted
• Redundant power supply compatibility reduces possibility of
single-point-of-failure for highest possible reliability
• Fully configurable through Web-based or SNMP network management
• IGMP Snooping V1/V2/V3 for multicast filtering and IGMP Query V1/V2
• Port-based VLAN (IEEE 802.1Q)
• Rapid Spanning Tree protocol (IEEE 802.1W)
• Port-based security
• Readily available - 48-hour delivery
• Lifetime warranty
Anixter No. Vendor No.
Description
394029
CNGE3FE7MS
Gbps managed Ethernet switch
The ComNet CNFE1MCM Mini Series Ethernet 2-port commercial-grade media
converter is designed to transmit and receive 10/100 Mbps data over one multimode
or single-mode optical fiber. The CNFE1MCM electrical interface will auto-negotiate to
a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface
operates at a 100 Mbps Ethernet rate. ComNet products are made in the USA, have a
lifetime guarantee and are available to purchase under GSA contract.
FEATURES
• 10/100 Mbps Ethernet
• 10/100BASE-T/TX electrical port
• 100BASE-FX optical port
• Designed for installation in benign (0 to +60ºC) operating environments
• Electrical port supports auto-negotiation for 10 Mbps or 100 Mbps, full-duplex
or half-duplex data
• Optical port supports 100 Mbps full-duplex data
• Automatic MDI/MDI-X crossover
• Distances up to: 3 km (2 miles) multimode; 45 km (28 miles) single-mode
• Transparent to data encoding/compatible with major data protocols
• Designed to meet full compliance with the environmental requirements of NEMA
TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
• ST optical connectors standard
• Voltage-transient protection on all power and signal input/output lines
• LED indicators
• IEEE 802.3 compliant
• Lifetime warranty
Anixter No. Vendor No.
Description
420727
CNFE1MCM A
ValueLine 10/100 Mbps Ethernet
media converter, pairs with B
420728
CNFE1MCM B
ValueLine 10/100 Mbps Ethernet
media converter, pairs with A
Request the latest literature and guides from Anixter.
6.38
PR29233V2-216356.eps
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 39 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
ComNet
Ethernet;Converters/17185
Index1.Networking Systems//Video Products//Video Security Systems
ComNet ValueLine CNFE1MCMPOE(M)(S) Media Converter with
Power over Ethernet
COMNET
PR28474V2-209152.eps
Video Transmission and Wireless
The ComNet CNFE1MCMPOE Mini Series Ethernet 2-port commercial-grade media
converter is designed to transmit and receive 10/100 Mbps data over one multimode
or single-mode optical fiber. The CNFE1MCMPOE features Power over Ethernet and
supports IEEE 802.3at as power sourcing equipment (PSE) with up to 25 watts @
48 V DC. The CNFE1MCM electrical interface will Auto-negotiate to a 10 Mbps, or
100 Mbps Ethernet rate without any adjustments. The optical interface operates at a
100 Mbps Ethernet rate. ComNet products are made in the USA, have a lifetime
guarantee and are available to purchase under GSA contract.
FEATURES
• Power over Ethernet (PoE) 25 W @ 48 V DC
• 10/100 Mbps Ethernet
• 10/100BASE-T/TX electrical port
• 100BASE-FX optical port
• Designed for installation in benign (0 to +60ºC) operating environments
• Electrical port supports Auto-negotiation for 10 Mbps or 100 Mbps, full-duplex
or half-duplex data
• Optical port supports 100 Mbps full-duplex data
• Automatic MDI/MDI-X crossover
• Transparent to data encoding/compatible with major data protocols
• Designed to meet full compliance with the environmental requirements of NEMA
TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
• ST optical connectors standard
• Voltage-transient protection on all power and signal input/output lines
• LED indicators
• IEEE 802.3 compliant
• Lifetime warranty
Anixter No. Vendor No.
Description
420734
CNFE1MCMPOE B ValueLine 10/100 Mbps Ethernet media
converter with PoE, "B" side
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.39
Revise - Sec06 Video Transmission and Wireless.fm Page 40 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
American Fibertek
./Transmission Systems;CCTV/4154
Transmission Systems;CCTV/4160
Index1.Networking Systems//Video Products//Video Security Systems
Index 1.Networking Systems//Video Products//Video Security Systems
Single-channel 3-ports-per-card Rack-mount FM
Video-transmission Systems
Video Transmission and Wireless
AMERICAN FIBERTEK
Single-channel, Low-cost, FM Video-transmission System
AMERICAN FIBERTEK
PR21511V2-122441.eps
PR21511V2-122441.eps
The American Fibertek M-30 Series products transmit and receive three channels of
high-quality video on three multimode optical fibers using FM transmission. This
system is designed to be completely transparent to all camera and monitor
manufacturers. Products require no field adjustments at installation or additional
maintenance thereafter. Diagnostic indicators provide a quick visual indication of
system status. The 30 Series are ordered as rack cards and are mounted in the
American Fibertek SR-20/2 Card Cage. These units are compatible with the
M100 series of single-channel video transmitters and receivers.
FEATURES
• For distances up to 24 km (14+ mi.)
• Full-color transmission
• Diagnostic indicators
for video, power and optical presence
D
• Compatible with M100/M300/M300S transmitters and receivers
• "High density" - 42 video ports per rack
• Least-expensive video link available
• Single-mode and multimode versions available
• Available as stand-alone modules or in rack-card configurations for use with the
American Fibertek SR-20/2 19 in. rack
850 NM
Anixter No.
258316
Vendor No.
RTM-30
258317
RRM-30
1300 NM
Anixter No.
258318
Vendor No.
RTM-33
258320
RRM-33
258321
RTM-33S
258322
RRM-33S
Description
850 nm, MM "3-up" rack-mount
transmitter 2.0 km
850 nm, MM "3-up" rack-mount receiver
2.0 km
Description
1300 nm, MM "3-up" rack-mount
transmitter 7.0 km
1300 nm, MM "3-up" rack-mount receiver
7.0 km
1300 nm, SM "3-up" rack-mount
transmitter 24.0 km
1300 nm, SM "3-up" rack-mount receiver
24.0 km
The American Fibertek M100/M300/M300S Series products transmit and receive
single-channel high-quality video using FM transmission. This system is designed to
be completely transparent to all camera and monitor manufacturers. Products
require no field adjustments at installation or additional maintenance thereafter.
Diagnostic indicators provide a quick visual indication of system status. Equipment
may be ordered as stand-alone modules or rack cards that are mounted in the
SR-20/2 American Fibertek Card Cage. These units are compatible with the
M30/M33/M33S series of three single-channel rack-mount video transmitters
and receivers.
FEATURES
• For distances up to 24 km (14+ mi.)
• Full-color transmission
• Compatible with NTSC, RS170A, RS343A, PAL, CCIR standards
• Smallest profile available anywhere
• Diagnostic indicators for video, power and optical presence
• Single-mode and multimode versions available
• Available as stand-alone modules or in rack-card configurations for use with the
American Fibertek SR-20/2 19 in. rack
850 NM
Anixter No.
258427
258428
258448
258449
Vendor No.
MTM-100
RTM-100
RRM-100
MRM-100C
Description
850 nm, MM transmitter module 2.0 km
850 nm, MM transmitter rack card 2.0 km
850 nm, MM receiver rack card 2.0 km
850 nm, MM receiver module 2.0 km
1300 NM
Anixter No.
258429
Vendor No.
RTM-300
258430
258431
258432
MTM-300
MTM-300S
RTM-300S
258433
258445
258446
258447
MRM-300S
RRM-300S
RRM-300
MRM-300
Description
1300 nm, MM transmitter rack card
7.0 km
1300 nm, MM transmitter module 7.0 km
1300 nm, SM transmitter module 24.0 km
1300 nm, SM transmitter rack card
24.0 km
1300 nm, SM receiver module 24.0 km
1300 nm, SM receiver rack card 24.0 km
1300 nm, MM receiver rack card 7.0 km
1300 nm, MM receiver module 7.0 km
Request the latest literature and guides from Anixter.
6.40
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 41 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
American Fibertek
Transceivers;CCTV/4159
Index1.Networking Systems//Video Products//Video Security Systems
Single-fiber Bi-directional Transceivers - Low Profile
AMERICAN FIBERTEK
PR21512V2-122447.eps
FEATURES
• For distances up to 3 km (1.8 mi.)
• Full-color transmission
• Smallest profile available anywhere
• Compatible with Ademco Video, Baxall, Betatech, Molynx, Panasonic, Pelco,
Philips, Sensormatic, Synectics, Vicon and other control suppliers
• Compatible with NTSC, RS170A, RS343A, PAL, CCIR standards
• Single-mode and multimode versions
• Available as stand-alone modules or in rack-card configurations for use with the
American Fibertek SR-20/2 19 in. rack
258412
RTM-1485
258421
RRM-1485
258422
MRM-1485
WITH UP-THE-COAX CODE
Anixter No. Vendor No.
339166
MTM-1605
339167
RTM-1605
339168
MTM-1605P
339169
RTM-1605P
339170
RRM-1605P
339171
MRM-1605P
339172
RRM-1605
339173
MRM-1605
Description
MM video transmitter module with
RS-485 code 2.5 km
MM video transmitter rack card with
RS-485 code 2.5 km
MM video receiver rack card with
RS-485 code 2.5 km
MM video receiver module with
RS-485 code 2.5 km
Description
MM video transmitter module with
Up-the-Coax code 2.5 km
MM video transmitter rack card with
Up-the-Coax code 2.5 km
MM video transmitter module with
Up-the-Coax code 2.5 km
MM video transmitter rack card with
Up-the-Coax code 2.5 km
MM video receiver rack card with
Up-the-Coax code 2.5 km
MM video receiver module with
Up-the-Coax code 2.5 km
MM video receiver rack card with
Up-the-Coax code 2.5 km
MM video receiver module with
Up-the-Coax code 2.5 km
Video Systems;CCTV/4156
Index 1.Networking Systems//Video Products//Video Security Systems
WITH MANCHESTER CODE
Anixter No. Vendor No.
258407
MTM-1200B
258408
RTM-1200B
258425
RRM-1200B
258426
MRM-1200B
WITH RS-422
Anixter No. Vendor No.
258409
MTM-1400
258410
RTM-1400
258423
RRM-1400
258424
MRM-1400
Single-fiber Video System With Bi-directional Data
Description
MM video transmitter module with
Manchester code 2.5 km
MM video transmitter rack card with
Manchester code 2.5 km
MM video receiver rack card with
Manchester code 2.5 km
MM video receiver module with
Manchester code 2.5 km
AMERICAN FIBERTEK
Description
MM video transmitter module with
RS-422 code 2.5 km
MM video transmitter rack card with
RS-422 code 2.5 km
MM video receiver rack card with
RS-422 code 2.5 km
MM video receiver module with
RS-422 code 2.5 km
The American Fibertek 8000 Series products transmit four to eight channels of
high-quality video with an additional channel of bi-directional data on one single
multimode optical fiber. Designed to be completely transparent to all camera and
monitor manufacturers, this system requires no field adjustments at installation or
additional maintenance thereafter. Diagnostic indicators provide a quick visual
indication of system status. Equipment may be mounted as stand-alone modules or
rack units by the position of the mounting brackets.
FEATURES
• For distances up to 25 km (15+ mi.), consult Anixter sales representative
• Real-time video transmission
• Full-color transmission
• Diagnostic indicators for video, power and optical presence
PR21514V2-122435.eps
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.41
Video Transmission and Wireless
The American Fibertek 1000 Series products transmit a single channel of high-quality
video with an additional channel of bi-directional data on one single multimode
optical fiber. Designed to be completely transparent to all camera and monitor
manufacturers, this system requires no field adjustments at installation or additional
maintenance thereafter. Diagnostic indicators provide a quick visual indication of
system status. Equipment may be mounted as stand-alone modules or rack units in
the SR-20/2American Fibertek Card Cage.
WITH RS-485
Anixter No. Vendor No.
258411
MTM-1485
Revise - Sec06 Video Transmission and Wireless.fm Page 42 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
American Fibertek
Video Transmission and Wireless
• Compatible with NTSC, RS170A, RS343A, AL, CCIR standards
• Compatible with Baxall, Betatech, Molynx, Panasonic, Pelco, Philips,
Sensormatic, Synectics, Vicon and other control suppliers
• Single-mode and multimode versions
• Equipment has modular or rack-mount selectable mounting brackets
• Universal power input (85-264 V AC)
4-CHANNEL
Anixter No.
258390
Vendor No.
MTX-8423C
258391
MRX-8423C
258392
MTX-8485C
258393
MRX-8485C
8-CHANNEL
Anixter No.
258394
Vendor No.
MRX-8823C
258395
MTX-8823C
258396
MTX-8885C
258397
MRX-8885C
Description
4-channel transmitter Manchester code
5.0 km
4-channel receiver Manchester code
5.0 km
4-channel transmitter RS-422 code
5.0 km
4-channel receiver RS-422 code 5.0 km
Description
8-channel receiver Manchester code
5.0 km
8-channel transmitter Manchester code
5.0 km
8-channel transmitter RS-422 code
5.0 km
8-channel receiver RS-422 code 5.0 km
2.5 KM SYSTEM
Anixter No. Vendor No.
258450
MT-404C
258451
RT-404C
258452
258453
MR-404C
RR-404C
5.0 KM SYSTEM
Anixter No. Vendor No.
258454
MT-440C
258455
RT-440C
Description
MM 4-channel transmitter module 2.5 km
MM 4-channel transmitter rack card
2.5 km
MM 4-channel receiver module 2.5 km
MM 4-channel receiver rack card 2.5 km
258456
258457
MR-440C
RR-440C
Description
MM 4-channel transmitter module 5.0 km
MM 4-channel transmitter rack card
5.0 km
MM 4-channel receiver module 5.0 km
MM 4-channel receiver rack card 5.0 km
25 KM SYSTEM
Anixter No.
258458
258459
258460
258461
Vendor No.
MT-440C-SL
RT-440C-SL
MR-440C-SL
RR-440C-SL
Description
SM 4-channel transmitter module 25 km
SM 4-channel transmitter rack card 25 km
SM 4-channel receiver module 25 km
SM 4-channel receiver rack card 25 km
Video Systems;CCTV/15258
Index 1.Networking Systems//Video Products//Video Security Systems
Single-fiber - 10-bit Digital - 4-channel Video System
AMERICAN FIBERTEK
PR21891V2-126568.eps
Video Systems;CCTV/4161
D
Index1.Networking Systems//Video Products//Video Security Systems
Single-fiber 4-channel Video System
AMERICAN FIBERTEK
PR21515V2-122445.eps
The American Fibertek 404C/440C/440C-SL Series products transmit four channels of
high-quality video. Designed to be completely transparent to all camera and monitor
manufacturers, these systems require no field adjustments at installation or
additional maintenance thereafter. Diagnostic indicators provide a quick visual
indication of system status. Equipment may be ordered as stand-alone modules or
rack cards that are mounted in the American Fibertek SR-20/2 Card Cage.
FEATURES
• For distances up to 25 km (15+ mi.)
• Real-time video transmission
• Full-color transmission
• Diagnostic indicators for video, power and optical presence
• Compatible with 500 Series audio/data modulators and demodulators
• Compatible with NTSC, RS170A, RS343A, PAL, CCIR standards
• Single-mode and multimode versions
• Available as stand-alone modules or in rack-card configurations for use with the
American Fibertek SR-20/2 19 in. rack
The American Fibertek 946 Series transmits four channels of high-quality, 10-bit
digitized video along with one channel of bi-directional data and one channel of
bi-directional contact closure on one multimode optical fiber. The 946SL Series
transmits four channels of high-quality, 10-bit digitized video along with one channel
of bi-directional data and one channel of bi-directional contact closure on one
single-mode optical fiber. Available data formats are switch selectable and include:
RS-485 (two or four wire), RS-422, RS-232, and Manchester/Bosch protocol data.
Designed to be completely transparent to all camera and monitor manufacturers, the
system requires no field adjustments at installation or additional maintenance
thereafter. Diagnostic indicators provide a quick visual indication of system status.
Equipment may be ordered as stand-alone modules or rack cards that are mounted in
SR-20D/2 or SR-20R/1 AFI Card Cages.
FEATURES
• 10-bit digital video transmission
• Available for multimode and single-mode fiber
• Diagnostic indications (LEDs): video, DC power, data activity, digital frame sync
and optical presence
• Full-color, real-time video transmission
• Serial digital transmission
Request the latest literature and guides from Anixter.
6.42
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 43 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
American Fibertek
(continued)
Single-fiber - 10-bit Digital - 4-channel Video System
• Compatible with NTSC; RS-170A, RS-343A, PAL and SECAM
• Data formats: RS-485/RS-422, RS-232. One channel of bi-directional data
• One channel of bi-directional contact closure
• Available as stand-alone modules or in rack-card configurations for use with the
American Fibertek SR-20/2 19 in. rack
Anixter No. Vendor No.
Description
370795
MT-946
Stand-alone transmitter, multimode, 2 km
370796
RT-946
Rack-card transmitter, multimode, 2 km
370799
MR-946
Stand-alone receiver, multimode
370802
RR-946
Rack-card receiver, multimode
370803
MT-946SL
Stand-alone transmitter, single-mode,
40 km
370805
RT-946SL
Rack-card transmitter, single-mode,
40 km
370807
MR-946SL
Stand-alone receiver, single-mode
370808
RR-946SL
Rack-card receiver, single-mode
Anixter No.
258405
Vendor No.
MRT-880C-SL
258406
MRR-880C-SL
Description
1300 nm, SM single-fiber 8-channel
transmitter module/rack 25 km
1300 nm, SM single-fiber 8-channel
receiver module/rack 25 km
Transmission Systems;Rack/15263
Index 1.Networking Systems//Video Products//Video Security Systems
Fiber Equipment Subrack System - Diagnostic Capable
AMERICAN FIBERTEK
PR21890V2-126572.eps
Index1.Networking Systems//Video Products//Video Security Systems
Single-fiber 8-channel Video System
AMERICAN FIBERTEK
PR21513V2-122442.eps
The American Fibertek 880C/880C-SL Series products transmit eight channels of
high-quality video on one multimode or single-mode optical fiber. Designed to be
completely transparent to all camera and monitor manufacturers. These systems
require no field adjustments at installation or additional maintenance thereafter.
Diagnostic indicators provide a quick visual indication of system status. Equipment
may be mounted as stand-alone modules or rack units by position of the
rack brackets.
FEATURES
• For distances up to 25 km (15+ mi.)
• Equipment has modular or rack-mount selectable mounting brackets
• Real-time video transmission
• Full-color transmission
• Diagnostic indicators for video, power and optical presence
• Compatible with NTSC, RS170A, RS343A, PAL, CCIR standards
• Compatible with 500 Series audio/data modulators and demodulators
• Single-mode and multimode versions
• Universal power input (85-264 V AC)
Anixter No. Vendor No.
Description
258402
MRT-880C
1300 nm, MM single-fiber 8-channel
transmitter module/rack 4.0 km
258403
MRR-880C
1300 nm, MM single-fiber 8-channel
receiver module/rack 4.0 km
The American Fibertek SR-20D/2 Series Fiber Equipment Subrack is a system that can
be configured with any combination of AFI products, including transmitters, receivers
or transceivers.
FEATURES
• Built-in AFI diagnostic capability
• Rear power bus to all plug-in cards
• 19 in. EIA rack-frame compatible
• 100 watt DC power supply included
• Up to 14 rack-card spaces
• Blank space slot cards for one, two or four space slots available
• Universal power input: 100 to 240 V AC at 47 to 63 Hz, 100 watts maximum
Anixter No. Vendor No.
Description
370809
SR-20D/2
Fiber optic subrack system
Network;Monitoring/14088
Index 1.Networking Systems//Video Products//Video Security Systems
Commander PoE Ethernet Switches with Environmental Monitoring,
Alarms and Auxiliary Outputs
AMERICAN FIBERTEK
PR21516V2-122438.eps
The Commander Series are fully managed 10-port network switches specifically
designed for operation in mission-critical applications. They have two gigE ports and
eight Fast Ethernet ports. V'nes Scout environmental-sensing features are built in to
every Commander Switch and will support up to four P-TA, P-VFP or P-TAH.
FEATURES
• Scout Environmental monitoring for any combination up to four P-TA, P-TAH or
P-VFP intelligent-sensing probes
• Built-in Web services for programming, operations and monitoring - no client
software required and can be used with most Web-browser systems
• Eight Fast Ethernet 10/100BASE-T ports
Continued on next page >>
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.43
Video Transmission and Wireless
Video Systems;CCTV/4158
Revise - Sec06 Video Transmission and Wireless.fm Page 44 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Video Transmission and Wireless
American Fibertek
• Two Gigabit Ethernet ports available in copper or fiber configurations for
custom applications
• Separate setup menus for security and IT departments
• Environmentally hardened for true security performance
• Separate RS-232/485 data "back channels" for IP-based
bi-directional communications
• "OPEN PATH" API availability and AFI engineering support for integration with
third-party hardware and software products
• PoE af and PoE Plus
Anixter No. Vendor No.
Description
339151
C10E
Eight Fast Ethernet/two Gigabit Ethernet
copper port version
339152
C10P
Eight Fast Ethernet/two Gigabit Ethernet
SFP pluggable port version
339154
C10E-POE
Eight Fast Ethernet/two Gigabit Ethernet
copper port version with PoE
339155
SFP-SX
Pluggable fiber module for Commander
C10P, 850 nm, 500 m
339156
SFP-LX
Pluggable fiber module for Commander
C10P, 1310 nm, 10 km
339157
SFP-ZX
Pluggable fiber module for Commander
C10P, 1550 nm, 80 km
339159
P-RB
Rack-mount bracket for P-TA and
P-TAH sensors
339160
P-TA
Intelligent temperature and airflow sensor
with 6 ft. USB cable
D P-TAH
339161
Intelligent temperature airflow and
humidity sensor with a 6 ft. USB cable
397225
P-VFP
Intelligent voltage, frequency and wattage
sensor with 6 ft. USB cable
Network;Monitoring/16318
Index1.Networking Systems//Video Products//Video Security Systems
V'nes NET-I/O Network Communications Center
AMERICAN FIBERTEK
PR23736V2-167422.eps
The NET-I/O is a "tunneling" product that provides a solution for transmitting
real-world alarm contacts, auxiliary outputs and data across networks through its
easy-to-use Web interface alarm.
Contacts generated at one location can trigger auxiliary outputs anywhere on your
network. For the first time, physical contacts no longer have any distance limitations.
Built-in data ports for RS-232 or RS-485. NET-I/O carries information from cash
registers, point of sale, access control and alarm panels from remote locations.
NET-I/O can e-mail alarms and auxiliaries and will also communicate to Commander
and Scout products.
FEATURES
• Six-programmable and titleable alarm inputs
• Six-programmable and titleable auxiliary outputs
• Four RS-232/422/485 titleable data streams
Anixter No. Vendor No.
Description
397229
N-664
Intelligent communications sensor
Network;Monitoring/15124
Index 1.Networking Systems//Video Products//Video Security Systems
Copper Ethernet to Fiber Network Media Converters
AMERICAN FIBERTEK
American Fibertek's V'nes MX Media Converter series enables network managers to
connect 10/100 Fast Ethernet or 1,000 Mbps GigE twisted-pair to fiber optic cabling
for wide bandwidth, cost-effective short- or long-distance transmission. Multiple-port
design reduces installation and cable allowing for multiple inputs to run on a single
path. The Media Converter MX series provides optional single-fiber WDM technology
combining dual-fiber cable into single cable for greater cost savings. Front-panel
LEDs provide easy status checking along with Link Fault Pass Through and MDI/MDI-X
for easy installation. When combined with Commander series switch products, the
MX provides easy and cost-effective solutions to convert any number of ports from
twisted-pair to fiber. The MX product line is available as stand-alone modules that
can also be directly inserted into a modular rack and SR-20-compatible rack
modular cards.
FEATURES
• Available in 10/100 and 10/100/1000 forms for both Ethernet and single and
multimode fiber
• Different speeds can be mixed on either type of product
• Dual Ethernet ports allow for connection of two network devices
• Stand-alone units easy to convert to rack-mount units with addition of a
front panel
• Link-fault detection using LEDs to indicate transmission problems
Anixter No. Vendor No.
Description
369087
MX2-100MM-2KM 10/100BASE-T 2-port copper to 1-port MM
fiber - 2 km
369088
MX2-100SM-20KM 10/100BASE-T 2-port copper to 1-port SM
fiber - 20 km
369089
MX2-1000MM-500M 10/100/1000BASE-T 2-port copper to
1-port MM fiber - 500 m
369090
MX2-1000SM-20KM 10/100/1000BASE-T 2-port copper to
1-port SM fiber - 20 km
369092
MX4-100TX
10/100BASE-T 4-port copper TX
369093
MX4-1000TX
10/100/1000BASE-T 4-port copper TX
369094
MXRC-1
Rack for MX modules including
power supply
369096
MXRCPS-1
Power supply for MXRC-1
Request the latest literature and guides from Anixter.
6.44
PR21518V2-122455.eps
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 45 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
MuxLab
./Baluns;CATV/14196
Baluns;Audio/Video/11866
Index1.Networking Systems//Video Products//Video Security Systems
Index 1.Networking Systems//Video Products//Video Security Systems
CATV Balun II
MUXLAB INC
CCTV Modular Balun
PR28480V2-208827.eps
PR10215V2-13904.eps
The CCTV Modular Balun allows a single composite CCTV video signal to be
transmitted via a single unshielded twisted pair for more cost-efficient cabling.
FEATURES
• Up to 2,200 ft. via Cat 5 with analog MUX or monitor
• Up to 1,000 to 1,500 ft. via Cat 5 with DVR equipment
• BNC to RJ45
• Compact, ergonomic design
Anixter No. Vendor No.
Description
275866
500000
CCTV Modular Balun
Baluns;Audio/Video/11867
Index 1.Networking Systems//Video Products//Video Security Systems
CCTV Screw Terminal Balun
MUXLAB INC
PR10216V2-13907.eps
Baluns;CATV/15050
Index1.Networking Systems//Video Products//Video Security Systems
CATV Distribution Hub
MUXLAB INC
PR21736V2-125809.eps
The CATV Distribution Hub allows terrestrial broadband RF video to be distributed to
multiple RF receivers via Cat 5 unshielded twisted-pair cable and is available in an
8-port or 16-port configuration. The product supports standard CATV channels, digital
cable and broadband Internet. The CATV Hub also features built-in gain amplification,
port buffering and works in conjunction with MuxLab's passive CATV Balun (500302)
and other RF video equipment for a complete RF cabling solution.
FEATURES
• 900 MHz bandwidth
• Supports CATV, Internet, digital cable
• Built-in RF amplifier
• Bi-directional transmission
• Works with other standard RF video equipment
Anixter No. Vendor No.
Description
366584
500300
CATV 8-port hub (desktop)
366595
500303
CATV 16-port hub (rack-mount)
The CCTV Screw Terminal Balun allows a single composite CCTV video signal to be
transmitted via a single unshielded twisted pair for more cost-efficient cabling.
FEATURES
• Same performance as the CCTV Modular Balun (500000)
• BNC to screw terminals
• Fits side-by-side on the back of any DVR
• Dust and moisture protection via slide-on cover
• Cable strain relief
Anixter No. Vendor No.
Description
275867
500009
CCTV Screw Terminal Balun
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.45
Video Transmission and Wireless
The CATV Balun II allows traditional 75 ohm coaxial cable to be replaced by a single
pair of Cat 5 UTP cable in the CATV, VHF and FM environments in certain applications.
Used in pairs, the CATV Balun II allows broadband CATV equipment to be integrated
into structured cabling systems, thereby allowing CATV equipment to be moved or
added to any convenient modular wall outlet. The CATV Balun II provides a versatile
cabling solution for broadband video systems used by schools, government, offices,
hospitals, financial institutions, hotels and residential complexes. The CATV Balun II
works in conjunction with RF splitters, combiners, amplifiers and cable modems for a
total cabling solution.
FEATURES
• Supports broadband Internet and digital cable
• High bandwidth - up to 900 MHz
• Low insertion loss
• Compact design
Anixter No. Vendor No.
Description
324952
500302
CATV Balun II
MUXLAB INC
Revise - Sec06 Video Transmission and Wireless.fm Page 46 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
MuxLab
Baluns;Audio/Video/11868
Baluns;Audio/Video/11869
Index1.Networking Systems//Video Products//Video Security Systems
Index 1.Networking Systems//Video Products//Video Security Systems
CCTV Mini Balun
MUXLAB INC
CCTV Pass-Thru Balun
PR10225V2-13934.eps
Video Transmission and Wireless
The CCTV Mini Balun allows a single composite CCTV video signal to be transmitted
via a single unshielded twisted pair for more cost-efficient cabling.
FEATURES
• Same performance as the CCTV Modular Balun (500000)
• BNC to screw terminals
• 8 in. mini-coax lead
• Fits inside dome cameras and back boxes
• Dust and moisture protection via slide-on cover
• Cable strain relief
Anixter No. Vendor No.
Description
282003
500023
CCTV Mini Balun
Baluns;Audio/Video/12706
Index1.Networking Systems//Video Products//Video Security Systems
Baluns;Audio/Video/15051
Index 1.Networking Systems//Video Products//Video Security Systems
CCTV Pass-Thru/GLI Balun
PR23743V2-167813.eps
PR28481V2-208821.eps
The CCTV Power-Thru Balun allows video and remote power to be transmitted via one
4-pair Cat 5 cable, thus eliminating the need to install multiple cables for more
efficient cabling in the CCTV security and surveillance environment. There are two
models: 500024; with modular RJ45 connector and 500029; with screw terminals.
The Power-Thru Balun may be used in pairs or in conjunction with standard
twisted-pair cross-connect devices and other MuxLab CCTV baluns such as the
500000, 500009, 500023, 500130, 500131 and 500015.
FEATURES
• Video and remote power via one 4-pair Cat 5 cable
• Video up to 2,200 ft. (670 m) via Cat 5 UTP
• Shorter distances may result with certain models of DVR
• Remote power up to 500 ft. (170 m) at 24 V AC/5 VA via three (3) twisted pairs
Anixter No. Vendor No.
Description
287822
500024
CCTV Power-Thru Balun, RJ45
289422
500029
CCTV Power-Thru Balun, screw terminals
The CCTV Pass-Thru/GLI Balun allows video, remote power and two-wire PTZ control to
be transmitted via one 4-pair Cat 5 cable and is designed for installations where
ground loop issues may be present. The product features Ground Loop Isolation (GLI)
and is installed either at the camera or DVR side in conjunction with other standard
MuxLab CCTV baluns such as the 500009, 500022, 500024/29 and 500130.
FEATURES
• Same video performance as the CCTV Modular Balun (500000)
• Remote power up to 350 ft. (106 m) at 24 V AC/5 VA via two (2) twisted pairs
• Ground Loop Isolation (GLI)
• May be installed at camera or DVR side
Anixter No. Vendor No.
Description
366596
500132
CCTV Pass-Thru/GLI Balun
Request the latest literature and guides from Anixter.
6.46
PR28482V2-208823.eps
The CCTV Pass-Thru Balun allows video, two-wire PTZ control and remote power to be
transmitted via one 4-pair Cat 5 cable, thus eliminating the need to install multiple
cables for more efficient CCTV cabling.
FEATURES
• Same video performance as the CCTV Modular Balun (500000)
• Remote power up to 350 ft. (106 m) at 24 V AC/5 VA via two (2) twisted pairs
• Built-in cable leads for ease of installation
Anixter No. Vendor No.
Description
282005
500022
CCTV Pass-Thru Balun
MUXLAB INC
CCTV Power-ThruD Balun
MUXLAB INC
MUXLAB INC
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 47 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
MuxLab
Baluns;Audio/Video/15052
Baluns;Audio/Video/11877
Index1.Networking Systems//Video Products//Video Security Systems
Index 1.Networking Systems//Video Products//Video Security Systems
Active CCTV Transmitter Balun
Audio-Video Distribution Hub
MUXLAB INC
PR21527V2-122495.eps
Baluns;Audio/Video/11870
Index1.Networking Systems//Video Products//Video Security Systems
LongReach Active CCTV Receiver Balun
MUXLAB INC
PR23768V2-167883.eps
PR10226V2-13937.eps
The Audio-Video Distribution Hub allows up to two composite video signals or one
S-Video signal and up to two analog audio signals to be distributed to up to eight
locations via twisted-pair cable for more cost-efficient cabling. Ideal for classrooms,
auditoriums, digital signage, trade shows and multimedia venues.
FEATURES
• Cascadable up to 72 displays via looping output port
• Composite video up to 2,200 ft. (670 m) via Cat 5
• S-Video up to 1,000 ft. (300 m) in color via Cat 5
• Supports NTSC, PAL and SECAM
• Works in conjunction with MuxLab part nos.: 500000, 500001, 500009,
500012, 500016, 500017, 500019, 500021, 500023
Anixter No. Vendor No.
Description
275882
500200
Audio-Video Distribution Hub, 110 V
Video Hubs;Component Video/14195
Index 1.Networking Systems//Video Products//Video Security Systems
Component Video Hub
MUXLAB INC
The LongReach Active CCTV Receiver Balun provides extended distance between the
CCTV camera and CCTV headend via copper twisted-pair cable. Automatic image
adjustment for picture brightness, sharpness and contrast, helping to eliminate
manual adjustments and on-site service calls.
FEATURES
• Automatic image adjustment
• Up to 5,000 ft. (1.5 km) via Cat 5 UTP with passive balun at camera
• Connects directly to the DVR or switcher
• Supports NTSC, PAL and SECAM
• Ground loop blocking
• Requires 24 V AC (not included)
Anixter No. Vendor No.
Description
275881
500015
LongReach Active CCTV Receiver Balun
PR13505V2-30489.eps
The Component Video Hub allows one (1) full component video (YPbPr/RGB) source
and one (1) digital audio video source to be distributed up to eight (8) or sixteen (16)
destinations depending on the model for more cost-efficient cabling. The
500250 supports up to eight (8) ports. The 500252 supports up to sixteen (16) ports.
The hub works in conjunction with the 500050, 500052 and other MuxLab baluns
that support component video digital audio and analog audio. Digital signage,
boardroom systems, multiroom systems, classroom training, retail systems,
electronic billboards, electronic signs, video kiosks, point-of-sale displays and
in-store video.
FEATURES
• Modular RJ45 on input and output
• Cascadable up to two (2) levels
• Supports 480i/p up to 1,000 ft. (305 m) via Cat 5
• Supports 720p/1080i/p up to 500 ft. (152 m) via Cat 5
• Supports digital or analog audio on fourth twisted pair
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.47
Video Transmission and Wireless
The Active CCTV Transmitter Balun provides enhanced performance for a single CCTV
video channel via Cat 5 unshielded twisted-pair (UTP) cable. The balun is installed at
the CCTV camera and is powered by the camera power supply.
Anixter No. Vendor No.
Description
366597
500100
Active CCTV Transmitter Balun, 12 V DC
366598
500101
Active CCTV Transmitter Balun, 24 V AC
MUXLAB INC
Revise - Sec06 Video Transmission and Wireless.fm Page 48 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
MuxLab
• Ground loop isolation on every port
• Integrates seamlessly with MuxLab baluns
Anixter No. Vendor No.
Description
339738
500250
Component Video Hub, 8 ports, 110 V
339739
500251
Component Video Hub, 8 ports, 220/240 V
341103
500252
Component Video Hub, 16 ports, 110 V
341104
500253
Component Video Hub, 16 ports,
220/240 V
Baluns;Audio/14193
Index 1.Networking Systems//Video Products//Video Security Systems
S-Video/Hi-Fi Balun
MUXLAB INC
PR23763V2-167863.eps
Baluns;Audio/Video/15054
Index1.Networking Systems//Video Products//Video Security Systems
Stereo Audio-Video Balun
Video Transmission and Wireless
MUXLAB INC
PR23774V2-167862.eps
The Stereo Audio-Video Balun allows a single composite video signal and a maximum
of two unbalanced audio signals to be transmitted via unshielded twisted-pair (UTP)
cable in a point-to-point connection.
FEATURES
D
• Cost-effective cabling
• Up to 2,200 ft. (670 m) in color via Cat 5 UTP
• Includes one 9 in. coax (BNC/BNC) jumper cable
Anixter No. Vendor No.
Description
275874
500001
Stereo Audio-Video Balun
The S-Video/Hi-Fi Balun allows a single S-Video signal to be transmitted via
unshielded twisted-pair (UTP) cable up to 1,000 ft. (305 m) in a point-to-point
connection.
The S-Video/Hi-Fi Balun features full audio bandwidth response for high-fidelity
applications and features built-in color-coded cable leads for ease of installation.
FEATURES
• Up to 1,000 feet (305 m) via Cat 5 UTP
• 20 Hz to 20 kHz audio bandwidth
• Compact design for neater wiring
• Lifetime warranty
Anixter No. Vendor No.
Description
339733
500038
S-Video/Hi-Fi Balun
Baluns;Audio/17271
Index 1.Networking Systems//Video Products//Video Security Systems
S-Video/Hi-Fi Wall Plate Balun - US
MUXLAB INC
PR28744V2-211825.eps
Baluns;Audio/Video/11871
Index1.Networking Systems//Video Products//Video Security Systems
S-Video Balun
MUXLAB INC
PR28579V2-209215.eps
The S-Video Balun allows one S-Video channel to be connected via two unshielded
twisted pairs. Ideal for laptop presentations, home entertainment and digital
signage applications.
FEATURES
• Up to 1,000 ft. via Cat 5 twisted pair
• 4-pin mini DIN to RJ45
• 5 in. cable lead for ease of installation
Anixter No. Vendor No.
Description
275870
500016
S-Video Balun, 4-pin DIN to RJ45
The S-Video/Hi-Fi Wall Plate Balun (500038-WP-US) allows a single S-Video signal to
be transmitted via unshielded twisted-pair (UTP) cable up to 1,000 ft. (305 m) in a
point-to-point connection. The S-Video/Hi-Fi Wall Plate Balun features full audio
bandwidth response for high-fidelity applications and is Decora compatible for ease
of installation. The S-Video/Hi-Fi Wall Plate Balun works in pairs or in conjunction
with the 500038 or 500017. Applications include: classroom video distribution,
commercial and home audio/video systems, hospital video training, video
conferencing and video kiosks.
FEATURES
• Up to 1,000 ft. (305 m) via Cat 5 UTP
• 20 Hz to 20 kHz audio bandwidth
• Decora compatible
• Lifetime warranty
Anixter No. Vendor No.
Description
420760
500038-WP-US
S-Video/Hi-Fi Wall Plate Balun
Request the latest literature and guides from Anixter.
6.48
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 49 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
MuxLab
Baluns;Audio/Video/11872
Baluns;Audio/Video/12709
Index1.Networking Systems//Video Products//Video Security Systems
Index 1.Networking Systems//Video Products//Video Security Systems
S-Video/Audio Balun
MUXLAB INC
Quad Video Balun
PR23767V2-167857.eps
Baluns;Audio/Video/11873
Index1.Networking Systems//Video Products//Video Security Systems
Dual Audio-Video Balun
MUXLAB INC
PR23765V2-167871.eps
The Quad Video Balun allows up to four composite video signals to be transmitted via
unshielded twisted-pair (UTP) cable in a point-to-point connection. Used in pairs, the
Quad Video Balun eliminates up to four coaxial cables, allowing video equipment to
be connected via space-efficient and cost-effective Category 5 twisted-pair cable.
The Quad Video Balun also works in conjunction with other MuxLab composite video
baluns such as the 500000, 500009 and 500021.
FEATURES
• Cost-efficient - replaces up to four coax cables
• Composite video up to 2,200 ft. (670 m) via Cat 5
• Component video up to 500 ft. (152 m) via Cat 5
• Compact design for neater wiring
Anixter No. Vendor No.
Description
315571
500032
Quad Video Balun, RCA
Baluns;Audio/Video/12710
Index 1.Networking Systems//Video Products//Video Security Systems
PR23771V2-167878.eps
Quad Audio Balun
MUXLAB INC
The Dual Audio-Video Balun allows two baseband video channels and two baseband
audio channels to be transmitted via four unshielded twisted pairs for more
cost-efficient cabling. Ideal for home entertainment, videoconferencing and
audio-video distribution.
FEATURES
• Composite video up to 2,200 ft. (670 m) via Cat 5
• S-Video up to 1,000 ft. (300 m) via Cat 5
• Four (4) RCA connectors for audio and video
• RJ45 for twisted pair
Anixter No. Vendor No.
Description
275879
500012
Dual Audio-Video Balun, RCA to RJ45
PR23764V2-167888.eps
The Quad Audio Balun allows up to four analog line audio signals to be transmitted
via unshielded twisted-pair (UTP) cable in a point-to-point connection. Used in pairs,
the Quad Audio Balun allows up to four coax audio cables to be replaced by one Cat
5 cable. The Quad Audio Balun also works in conjunction with other MuxLab analog
audio baluns such as the 500019.
FEATURES
• Cost-efficient cabling - save up to four cables
• Analog audio up to 5,000 ft. (1.5 km) via Cat 5
• Compact design for neater wiring
Anixter No. Vendor No.
Description
315573
500033
Quad Audio Balun
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.49
Video Transmission and Wireless
The S-Video/Audio Balun allows one S-Video channel and two audio channels to be
connected via four unshielded twisted pairs. Ideal for boardroom presentation
systems, home entertainment and digital signage systems.
FEATURES
• Up to 1,000 ft. via Cat 5 twisted pair
• 4-pin mini DIN for video
• RCA connectors for audio
• Built-in cable lead for ease of installation
Anixter No. Vendor No.
Description
275880
500017
S-Video/Audio Balun, 4-pin DIN and RCA
to RJ45
MUXLAB INC
Revise - Sec06 Video Transmission and Wireless.fm Page 50 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
MuxLab
Baluns;Audio/Video/11874
Baluns;Audio/Video/12711
Index1.Networking Systems//Video Products//Video Security Systems
Index 1.Networking Systems//Video Products//Video Security Systems
Analog Audio Balun
Video Transmission and Wireless
MUXLAB INC
Component Video/Digital Audio Balun
PR10222V2-13925.eps
The Analog Audio Balun allows any 75 ohm unbalanced analog audio signal to be
transmitted via a single unshielded twisted-pair (UTP) cable for more cost-efficient
cabling. Ideal for auditoriums, arenas, schools, home theatre systems, airports,
hotels, hospitals and conference rooms.
FEATURES
• Up to 5,000 ft. (1.5 km) via Cat 5 UTP
• 40 to 20 kHz bandwidth
• Gold-plated RCA connector
• Cable strain relief
• Compact design
Anixter No. Vendor No.
Description
275869
500019
Analog Audio Balun, RCA to screw terminal
D
Baluns;Audio/Video/11875
Index1.Networking Systems//Video Products//Video Security Systems
Component Video Balun
MUXLAB INC
PR10223V2-13928.eps
MUXLAB INC
PR23754V2-167835.eps
PR23753V2-167829.eps
The Component Video/Digital Audio Balun allows one component video (YPbPr or RGB)
signal and one digital audio signal to be transmitted via one Cat 5 twisted-pair cable
for more cost-efficient cabling.
FEATURES
• Supports 480i/p up to 1,000 ft. (305 m) via Cat 5
• Supports 720p/1080i/p up to 500 ft. (152 m) via Cat 5
• Molded color-coded RCA cable leads
• Supports digital audio on fourth twisted pair
• Modular shielded RJ45 connector
Anixter No. Vendor No.
Description
312789
500050
Component Video/Digital Audio Balun, M
366601
500051
Component Video/Digital Audio Balun, F
Baluns;Audio/Video/15055
Index 1.Networking Systems//Video Products//Video Security Systems
Component Video/Analog Audio Balun
The Component Video Balun allows a single component video signal (Y, Pb or Pr) to be
transmitted via cost-effective unshielded twisted-pair (UTP) cable. Three balun pairs
are required for one complete component (YPbPr) video connection.
FEATURES
• Three balun pairs required per YPbPr connection
• Component video up to 1,000 ft. (305 m) via Cat 5
• Composite video up to 2,200 ft. (670 m) via Cat 5
• Gold-plated connector
• Cable strain relief
• Compact design
• Supports 480i/p only
Anixter No. Vendor No.
Description
275872
500021
Component Video Balun, RCA to
screw terminal
MUXLAB INC
The Component Video/Digital Audio Balun allows one component video (YPbPr or RGB)
signal and one analog audio signal to be transmitted via one Cat 5 twisted-pair cable
for more cost-efficient cabling.
Request the latest literature and guides from Anixter.
6.50
PR23752V2-167838.eps
1.800.ANIXTER • anixter.com/literature
SEC006Dat.fm Page 51 Friday, December 14, 2012 2:56 PM
Video Transmission and Wireless
MuxLab
FEATURES
• Supports 480i/p up to 1,000 ft. (305 m) via Cat 5
• Supports 720p/1080i/p up to 500 ft. (152 m) via Cat 5
• Molded color-coded RCA cable leads
• Supports analog audio on fourth twisted pair
• Modular shielded RJ45 connector
Baluns;Audio/Video/17204
Index 1.Networking Systems//Video Products//Video Security Systems
Component Video/Analog Audio Wall Plate Balun
MUXLAB INC
PR28485V2-208825.eps
PR23751V2-167816.eps
Anixter No.
366604
366605
Vendor No.
500052
500053
Description
Component Video/Analog Audio Balun, M
Component Video/Analog Audio Balun, F
Component Video/IR Pass-Thru Balun
MUXLAB INC
PR23750V2-167803.eps
Baluns;Audio/Video/12712
Index 1.Networking Systems//Video Products//Video Security Systems
The Component Video/IR Pass-Thru Balun allows one component video (YPbPr or RGB)
signal and one IR emitter pass-thru signal to be transmitted via one Cat
5 twisted-pair cable for more cost-efficient cabling.
FEATURES
• Supports 480i/p up to 1,000 ft. (305 m) via Cat 5
• Supports 720p/1080i/p up to 500 ft. (152 m) via Cat 5
• Molded color-coded RCA cable leads
• Supports IR emitter pass-thru on fourth twisted pair
• Modular shielded RJ45 connector
Active VGA Balun Kit
MUXLAB INC
PR13517V2-30483.eps
PR23749V2-167805.eps
Anixter No.
366607
366608
Vendor No.
500054
500055
Description
Component Video/IR Pass-Thru Balun, M
Component Video/IR Pass-Thru Balun, F
The Active VGA Balun Kit allows VGA video to be transmitted via cost-efficient
unshielded copper twisted-cable in a point-to-point configuration. Each kit includes
one transmitter and one receiver. The product supports up to 1,800x1,440 pixels for
applications that require superior performance and features manual gain adjustment
and local monitor output for added versatility.
FEATURES
• Up to 500 ft. (152 m) via Cat 5 TP at 1,600x1,200
• Support for local monitor
• Adjustable gain control
Anixter No. Vendor No.
Description
321076
500035
Active VGA Balun Kit, 110 V
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.51
Video Transmission and Wireless
Baluns;Audio/Video/15056
Index1.Networking Systems//Video Products//Video Security Systems
The Component Video/Analog Audio Wall Plate Balun (500053-WP-US) allows one
component video (YPbPr or RGB) signal and one analog audio signal to be transmitted
via one Category 5e/6 twisted-pair cable for more cost-efficient cabling. Used in
pairs or with the 500052/500053, the Component Video/Analog Audio Wall Plate
Balun supports 480i/p, 720p and 1080i/p video formats for commercial and
residential high-definition (HDTV) video applications.
FEATURES
• Supports 480i/p, 720p, 1080i/p
• Supports 480i/p up to 1,000 ft. (305 m) via Cat 5e/6
• Supports 720p/1080i/p up to 500 ft. (152 m) via Cat 5e/6
• Supports analog audio on fourth twisted pair
• Decora compatible
• Modular shielded RJ45 connector
Anixter No. Vendor No.
Description
420830
500053-WP-US
Component Video/Analog Audio Wall
Plate Balun
Revise - Sec06 Video Transmission and Wireless.fm Page 52 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
MuxLab
Baluns;Audio/Video/11876
Baluns;VGA/14197
Index1.Networking Systems//Video Products//Video Security Systems
Index 1.Networking Systems//Video Products//Video Security Systems
VGA Balun
VGA Balun II
Video Transmission and Wireless
MUXLAB INC
PR23773V2-167882.eps
The VGA Balun allows one VGA video channel to be connected via four twisted pairs
for more cost-efficient cabling. Ideal for classrooms, lecture halls, auditoriums,
digital signage, video information displays, online advertising, trade shows, DVR
monitors, hotel and convention centers, laptop presentations and
collaborative viewing.
FEATURES
• Save conduit space
• Up to 350 ft. (106 m) via Cat 5 at 800x600 resolution
• Supports PCs, laptops, CRT, DLP, plasma, LCD, touch screens
• One VGA connector for video and RJ45 for twisted pair
• Shielded twisted pair is highly recommended to ensure common signal ground
between the VGA source and the VGA display
PR23772V2-167880.eps
D
Anixter No.
275877
275878
282002
Vendor No.
500010
500011
500014
Description
VGA Balun, PC side, DB15HD-male
VGA Balun, monitor side, DB15HD-female
VGA Balun, monitor side, DB15HD-male
MUXLAB INC
PR23761V2-167852.eps
PR23760V2-167869.eps
The VGA Balun II eliminates costly and bulky VGA cable, allowing a VGA source to be
connected to a VGA monitor via one 4-pair Cat 5 unshielded twisted-pair (UTP) cable.
Used in pairs, the VGA Balun II allows VGA video to be transmitted up to 350 ft.
(107 m) via Cat 5 at 800x600 resolution. Each VGA connection requires MuxLab part
no. 500040 or 500043 at the source and either part no. 500041 or 500042 at the
display. The VGA Balun II works in conjunction with laptops, PCs, plasmas, CRT, LCD
monitors and DLP projectors. Typical applications include digital signage, boardroom
systems, classroom video instruction and custom audio-video systems. The product
features a reset button that may be required when used in conjunction with certain
sync-sensitive displays.
FEATURES
• Fully supports Cat 5 unshielded twisted pair (UTP)
• Cost-efficient versus VGA cable
• Use existing structured cabling system
• Save conduit space
• Reset button on units may be required with certain sync-sensitive displays
• Not compatible with 500010, 500011, 500014, 500035 or 500036
PR23760V2-167869.eps
Anixter No.
339735
339736
Vendor No.
500040
500041
339737
366620
500042
500043
Description
VGA Balun II, DB15 HD plug, PC side
VGA Balun II, DB15 HD receptacle,
monitor side
VGA Balun II, DB15 HD plug, monitor side
VGA Balun II, DB15 HD receptacle, PC side
Request the latest literature and guides from Anixter.
6.52
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 53 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
MuxLab
Baluns;VGA/17205
Index1.Networking Systems//Video Products//Video Security Systems
VGA Wall Plate Balun II - US
MUXLAB INC
PR28487V2-208811.eps
FEATURES
• Up to 350 ft. (106 m) via Cat 5 UTP
• Color-coded cable leads
• Compact design
Anixter No. Vendor No.
Description
321078
500045
PS/2 Converter - PS/2-receptacle,
keyboard/mouse side
321079
500046
PS/2 Converter - PS/2-plug, PC/server side
330850
500047
PS/2 Converter Kit (500045 and 500046)
Baluns;Audio/14191
Index 1.Networking Systems//Video Products//Video Security Systems
Stereo Audio Balun
Baluns;Audio/Video/12713
Index1.Networking Systems//Video Products//Video Security Systems
PS/2 Converter
MUXLAB INC
MUXLAB INC
PR28488V2-208807.eps
Video Transmission and Wireless
The VGA Wall Plate Balun II (500041-WP-US, 500043-WP-US) eliminates costly and
bulky VGA cable, allowing a VGA source to be connected to a VGA monitor via one (1)
Cat 5e/6 cable. The VGA Wall Plate Balun II allows VGA video to be transmitted up to
350 ft. (107 m) via Cat 5e/6 at 800x600 resolution. The 500043-WP-US works with
the 500041-WP-US or in conjunction with the 500041 or 500042. The 500041-WP-US
works with the 500043-WP-US or in conjunction with the 500040 or 500043. Typical
applications include digital signage, boardroom systems, classroom video instruction
and custom audio-video systems. The product features a reset button that may be
required when used in conjunction with certain sync-sensitive displays.
FEATURES
• Fully supports Cat 5e/6 unshielded twisted pair (UTP)
• Cost-efficient versus VGA cable
• Decora compatible
• Save conduit space
• Reset button on units may be required with certain sync-sensitive displays. Not
compatible with 500010, 500011 and 500014
Anixter No. Vendor No.
Description
420832
500041-WP-US
VGA Wall Plate Balun II, HD15F,
monitor side
420833
500043-WP-US
VGA Wall Plate Balun II, HD15F, PC side
The Stereo Audio Balun allows unbalanced line level stereo analog audio
to be transmitted via Cat 5 unshielded copper twisted pair (UTP) in a
point-to-point connection.
The product is designed for audio applications where primarily midrange
audio-frequency response is required.
FEATURES
• Cost-efficient cabling
• Up to 5,000 ft. (1.5 km) via Cat 5 UTP
• Color-coded RCA cable leads
• Quicker moves, adds and changes
• Compact design
Anixter No. Vendor No.
Description
339724
500027
Stereo Audio Balun
PR23757V2-167826.eps
The PS/2 Converter allows a standard PS/2 keyboard and mouse to be connected to a
PC up to 350 ft. away (106 m) via Cat 5 unshielded twisted-pair cable in a
point-to-point configuration. There are two models: 500045 and 500046. Both
models work in pairs or in conjunction with each other for maximum cabling
flexibility. The 500045 is designed to connect easily to a PS/2 keyboard and mouse.
The 500046 is designed to connect easily to the PC.
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.53
Revise - Sec06 Video Transmission and Wireless.fm Page 54 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
MuxLab
Baluns;Audio/14192
Baluns;HDMI/17206
Index1.Networking Systems//Video Products//Video Security Systems
Index 1.Networking Systems//Video Products//Video Security Systems
Stereo Hi-Fi Balun
Video Transmission and Wireless
MUXLAB INC
HDMI Econo Plus Extender Kit
PR23766V2-167889.eps
The Stereo Hi-Fi Balun allows unbalanced line level stereo analog audio to be
transmitted via Cat 5 unshielded copper twisted pair (UTP) in a point-to-point
connection. The product is designed for audio applications where full-range,
hi-fidelity audio-frequency response is required.
FEATURES
• 20 Hz to 20 KHz bandwidth
• Cost-efficient cabling
• Up to 3,250 ft. (1 km) via Cat 5 UTP
• Color-coded RCA cable leads
• Quicker moves, adds and changes
Anixter No. Vendor No.
Description
339731
500028
Stereo Hi-Fi Balun
MUXLAB INC
PR28489V2-208804.eps
The HDMI Econo Plus Extender Kit (500401) allows HDMI equipment to be connected
up to 90 ft. (27 m) via two Cat 5e unshielded twisted-pair cables in a point-to-point
configuration at 1080p Deep Color (12-bit) resolution. The kit comes with one
transmitter and one receiver. The product is the upgrade replacement to the 500400.
FEATURES
• Up to 150 ft. (45 m) @ 1080p via Cat 5e
• Up to 90 ft. (27 m) @ 1080p deep color via Cat 6
• Connect via two Cat 5e cables
• Compact design
Anixter No. Vendor No.
Description
414602
500401
HDMI Econo Plus Extender Kit
Baluns;HDMI/17393
Index 1.Networking Systems//Video Products//Video Security Systems
D
Baluns;Audio/14194
HDMI IR/Extender Kit
Index1.Networking Systems//Video Products//Video Security Systems
Stereo Hi-Fi / Video Balun
MUXLAB INC
MUXLAB INC
The Stereo Hi-Fi / Video Balun (500039) allows a single composite video signal to be
transmitted via unshielded twisted-pair (UTP) cable up to 2,200 ft. (670 m) in a
point-to-point connection. The Stereo Hi-Fi/Video Balun features full audio bandwidth
response for hi-fidelity applications and features built-in color-coded cable leads for
ease of installation.
FEATURES
• Up to 2,200 ft. (670 m) via Cat 5 UTP
• 20 Hz to 20 kHz audio bandwidth
• Built-in color-coded cable leads
• Compact design for neater wiring
• Lifetime warranty
Anixter No. Vendor No.
Description
339734
500039
Stereo Hi-Fi / Video Balun
The HDMI IR/Extender Kit (500405) allows HDMI equipment to be connected up to
300 ft. (91 m) via two (2) Cat 5e/6 unshielded twisted-pair cables in a point-to-point
configuration at 1080i resolution. The product also supports 1080p Deep Color up to
150 ft. (46 m) via two (2) Cat 6 cables. The kit includes one (1) transmitter, one (1)
receiver, one (1) IR Emitter, one (1) IR Sensor and two (2) power supplies. The
transmitter (500406) and receiver (500407) are also sold separately. Replacement IR
Emitter (500998) and IR Sensor (500999) may be ordered.
FEATURES
• Up to 150 ft. (46 m) @ 1080p Deep Color via Cat 6
• Up to 300 ft. (91 m) @ 1080i via Cat 5e/6
• Connect via two (2) Cat 5e/6 cables
• Includes IR Emitter and IR Sensor
Anixter No. Vendor No.
Description
423710
500406
HDMI IR/Transmitter
423714
500407
HDMI IR/Receiver
420840
500405
HDMI, IR/Extender Kit
Request the latest literature and guides from Anixter.
6.54
PR28768V2-211818.eps
PR23762V2-167850.eps
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 55 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
MuxLab
Baluns;HDMI/17394
Index1.Networking Systems//Video Products//Video Security Systems
HDMI 1x4 Distribution Hub
MUXLAB INC
PR28770V2-211829.eps
• Ground loop blocking
• Power requirements: North America: 24 V AC/60 VA; Europe: 24 V AC/70 VA
Anixter No. Vendor No.
Description
282000
500120
LongReach 16 Active CCTV Hub, UTP/UTP,
110 V/24 V AC
282001
500122
LongReach 16 Active CCTV Hub, UTP/coax,
110 V/24 V AC
Baluns;Accessories/15058
Index 1.Networking Systems//Video Products//Video Security Systems
Rackmount Balun Chassis 16
PR28769V2-211826.eps
Anixter No.
423716
Vendor No.
500420
Description
HDMI 1x4 Distribution Hub
Baluns;Audio/Video/12707
Index1.Networking Systems//Video Products//Video Security Systems
LongReach 16 Active CCTV Hub
MUXLAB INC
PR13512V2-30470.eps
MUXLAB INC
PR21538V2-122491.eps
The Rackmount Balun Chassis 16 is designed as a headend cable-management
solution to allow any combination of MuxLab square baluns to be installed in a 19 in.
relay rack. Headend A/V equipment such as DVD players, video servers and satellite
boxes may be installed in a local wiring closet and connected to the Cat 5 structured
cabling system via a wide array of MuxLab balun solutions. The panel is
custom-tailored to allow any combination of up to 16 MuxLab baluns to be installed.
The baluns may be installed with the RJ45 either front- or rear-facing depending on
where the Cat 5 cabling will enter or exit the system. At the display end, the
appropriate MuxLab baluns are installed at the display to support a fully Cat
5 cabling solution. Each balun snaps into place and is held firmly by a spring latching
mechanism. The one-piece design makes the product easy to install and maintain.
There are no parts to lose or replace. Blank Filler Modules (500901) may be ordered
separately to fill in unused slot positions.
FEATURES
• Space-efficient - 2U height
• One-piece design
• Latching mechanism for secure installation
• Supports up to 16 baluns
• Snap-in design for ease of installation
• Baluns install forward- or rear-facing
• Includes four rack-mount screws and washers
• Slot number silkscreen on front and rear
• Blank Filler Modules (500901) sold separately
Anixter No. Vendor No.
Description
349055
500900
Rackmount Balun Chassis 16
The LongReach 16 Active CCTV Hub provides a complete "plug-and-forget" CCTV
cabling solution via copper twisted-pair cable.
FEATURES
• Auto gain control on every port, no need for manual adjustments
• Up to 4,500 ft. (1.2 km) via Cat 5 UTP with passive CCTV baluns at cameras
• 500120: Connects to the DVR or switcher via twisted pair
• 500122: Connects directly to the DVR or switcher via coax
• Supports NTSC, PAL and SECAM
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.55
Video Transmission and Wireless
The HDMI 1x4 Distribution Hub (500420) allows one (1) HDMI source to be
distributed to up to four (4) HDMI displays via two (2) Cat 5e/6 cables. The product
supports up to 150 ft. (46 m) at 1080p/8-bit via Cat 5e cable on either side of the
hub. The product supports remote IR control and works in conjunction with the HDMI
IR/Extender (500405 [kit], 500406 [Tx] and 500407 [Rx]).
FEATURES
• Distributes one HDMI source to up to four displays
• Supports Cat 5e/6 on input and output sides
• Up to 150 ft. (46 m) @ 1080p via two (2) Cat 5e
• Up to 300 ft. (91 m) @ 1080i via two (2) Cat 5e
• Up to 150 ft. (46 m) @ 1080p Deep Color via Cat 6
• Cascadable
• Local HDMI output
• Includes one (1) IR Emitter for IR source control
• EDID configuration switch
Revise - Sec06 Video Transmission and Wireless.fm Page 56 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
MuxLab
Baluns;Accessories/15059
Index1.Networking Systems//Video Products//Video Security Systems
Wall Mount Balun Fixture
MUXLAB INC
PR21539V2-122492.eps
FEATURES
• One-piece design
• May be mounted close to each other
• Includes two mounting screws and anchors
• Balun sold separately
Anixter No. Vendor No.
Description
368152
500915
Surface Mount Balun Plate
Baluns;Audio/Video/15248
Index 1.Networking Systems//Video Products//Video Security Systems
Component/Composite Video Balun
Video Transmission and Wireless
MUXLAB INC
PR23748V2-167798.eps
The Wall Mount Balun Fixture (500910) allows any MuxLab square balun to be
installed behind a Decora compatible wall plate for custom A/V installation. The
baluns may be installed with the RJ45 either front- or rear-facing depending on where
the Cat 5 cabling will enter or exit the system. At the headend, the appropriate
MuxLab baluns are installed near the equipment to support a fully Cat 5 cabling
solution. Each balun snaps into place and is held firmly by a spring latching
mechanism. The one-piece design makes the product easy to install and maintain.
There are no parts to lose or replace.
FEATURES
• Supports one (1) MuxLab square balun
• Decora compatible
• One-piece design
• Spring clip holds balun securely in place
• Baluns install Dfront- or rear-facing
• Snap-off mounting tabs for mounting versatility.
• Attaches to standard gang boxes and mud rings
Anixter No. Vendor No.
Description
368149
500910
Wall Mount Balun Fixture
The Component/Composite Video Balun allows one component video (YPbPr or RGB)
signal and one composite video signal to be transmitted via one Cat 5 twisted-pair
cable for more cost-efficient cabling.
FEATURES
• Supports 480i/p up to 1,000 ft. (305 m) via Cat 5
• Supports 720p/1080i/p up to 500 ft. (152 m) via Cat 5
• Molded color-coded RCA cable leads
• Supports composite video on fourth twisted pair
• Modular shielded RJ45 connector
PR23747V2-167811.eps
Baluns;Accessories/15060
Index1.Networking Systems//Video Products//Video Security Systems
Surface Mount Balun Plate
MUXLAB INC
PR21540V2-122464.eps
Anixter No.
370226
370227
Vendor No.
500056
500057
Description
Component/Composite Video Balun, M
Component/Composite Video Balun, F
The Surface Mount Balun Plate (500915) allows any MuxLab square balun to be
installed on a wall or furniture surface for a more permanent and secure installation.
Headend A/V equipment such as DVD players, video servers and satellite boxes may
be installed in a local wiring closet and connected to the Cat 5 structured cabling
system via a wide array of MuxLab balun solutions. The 500915 fully covers the balun
and allows the pin configuration to be displayed for ease of reference. Mounting ears
are positioned to allow multiple fixtures to be installed next to each other. The
500915 comes with two mounting screws and plastic anchors for drywall
(gyproc) installation.
Request the latest literature and guides from Anixter.
6.56
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 57 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
MuxLab
Baluns;Audio/Video/16072
Index1.Networking Systems//Video Products//Video Security Systems
USB 4-Port Extender Kit
MUXLAB INC
PR23744V2-167814.eps
FEATURES
• Up to 1,000 ft. (305 m) via Cat 5e/6 @ 480i/p
• Up to 500 ft. (152 m) via Cat 5e/6 @ 1080p
• Supports simultaneous stereo and digital audio
• IR-Emitter pass-through
• Manual brightness compensation
• Manual sharpness compensation
• Ground loop isolation
Anixter No. Vendor No.
Description
394256
500090
Active Component Video Balun Kit
Baluns;Audio/Video/16070
Index 1.Networking Systems//Video Products//Video Security Systems
Active VGA Balun II Kit
MUXLAB INC
PR28580V2-209212.eps
Baluns;Audio/Video/16068
Index1.Networking Systems//Video Products//Video Security Systems
Component Video/Stereo Audio Balun
MUXLAB INC
PR23746V2-167799.eps
The Component Video/Stereo Audio Balun (500058) allows one component video
(YPbPr or RGB) signal and one (1) stereo audio channel to be transmitted via one (1)
Cat 5e/6 twisted-pair cable for more cost-efficient cabling. The product features
ground loop coupling (GLC) to help eliminate "hum-bars."
Anixter No. Vendor No.
Description
394255
500058
Component Video/Stereo Audio Balun
The Active VGA Balun II Kit allows VGA or component video to be transmitted via
cost-efficient unshielded copper twisted-pair cable in a point-to-point configuration.
The product supports remote power pass-thru and is DDC-compliant with all
"plug-and-play" laptops, PCs and displays.The product supports up to
1,920x1,440 pixels and 1080p resolution and features manual gain adjustment and
local monitor output for added versatility.
FEATURES
• Up to 600 ft. (180 m) via Cat 5e/6 @ 1,920 x 1,440
• Up to 600 ft. (180 m) via Cat 5e/6 @ 1080p
• Remote power pass-thru up to 150 ft. (46 m)
• DDC1/DDC2 (plug-and-play) compliant
• Manual gain compensation
• Local monitor output
• Ground loop isolation
• Includes U.S., UK and Euro blades
PR23315V2-163235.eps
Baluns;Audio/16069
Index1.Networking Systems//Video Products//Video Security Systems
Active Component Video Balun Kit
MUXLAB INC
PR23318V2-163252.eps
The Active Component Video Balun Kit allows component video, analog stereo audio
and/or digital audio, plus one IR-emitter signal to be transmitted via one (1) Cat
5e/6 cable in a point-to-point configuration.
Anixter No.
394257
Vendor No.
500140
420928
500141
Description
Active VGA Balun II Kit (includes 1 Tx and
1 Rx)
Active VGA Balun II, transmitter only (PC
side). No PSU for use with 500150
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.57
Video Transmission and Wireless
The USB 4-Port Extender Kit allows up to four (4) USB 1.1 full-speed or low-speed
devices to be connected to a USB host via one (1) Cat 5e/6 cable. The USB Extender
supports up to 150 ft. (46 m) in a point-to-point connection. The kit comes with one
(1) host-side adapter, one (1) device-side transceiver and one (1) power supply for
devices requiring 500 mA. The USB Extender Receiver may be installed in MuxLab
rack-wall and surface-mount accessories for neater installation.
Anixter No. Vendor No.
Description
394270
500070
USB 4-Port, USB extender kit
Revise - Sec06 Video Transmission and Wireless.fm Page 58 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
MuxLab
Anixter No.
394258
Vendor No.
500142
394260
500144
Description
Active VGA Balun II, receiver only
(display). No PSU for use with 500150
Power supply 100-240 V/12 V DC/5 A
for 500142
Baluns;Audio/Video/16071
Index1.Networking Systems//Video Products//Video Security Systems
VGA 1x4 Distribution Hub
Video Transmission and Wireless
MUXLAB INC
FEATURES
• Video up to 2,200 ft. (670 m) via Cat 5e/6
• Audio up to 3,250 ft. (990 m) via Cat 5e/6
• 20 Hz to 20 kHz audio bandwidth
• IR two-wire emitter pass-thru on fourth twisted pair
• Built-in color-coded cable leads
• Lifetime warranty
PR23755V2-167841.eps
PR23314V2-163223.eps
The VGA 1x4 Distribution Hub allows one (1) VGA (RGBHV) source to be distributed up
to up to four (4) displays via Cat 5/6 cable for more cost-efficient cabling. The hub
works in conjunction with the Active VGA Balun II Kit (500140) and Active VGA Balun
II Receivers (500142). At least one (1) 500140 is required to support one (1) display.
Up to three (3) additional 500142 may be added to support up to three (3)
additional displays.
FEATURES
• Plug-and-play D- DDC1 and DDC2-compliant
• Remote power up to 150 ft. (46 m)
• Modular RJ45 on input and output
• Supports up to 1,920x1,440, 1080p
• Cascadable up to four (4) levels
• Ground loop isolation on every port
• Works in conjunction with 500140 and 500142
Anixter No. Vendor No.
Description
394261
500150
VGA Hub, 4 ports, 110 V
Baluns;Audio/16067
Anixter No.
394253
394254
Vendor No.
500048
500049
Description
Stereo AV/ IR Pass-Thru Balun, M
Stereo AV/IR Pass-Thru Balun, F
Baluns;Audio/Video/16065
Index 1.Networking Systems//Video Products//Video Security Systems
CCTV Modular RCA Balun
MUXLAB INC
PR23324V2-163241.eps
The CCTV Modular RCA Balun allows a single composite CCTV video signal to be
transmitted via a single unshielded twisted-pair cable for more cost-efficient cabling.
Index1.Networking Systems//Video Products//Video Security Systems
Stereo AV/IR Pass-Thru Balun
MUXLAB INC
PR23756V2-167842.eps
FEATURES
• Up to 2,200 ft. via Cat 5 with analog MUX or monitor
• Up to 1,000 ft. to 1,500 ft. via Cat 5 with DVR equipment
• RCA-M to RJ45
• Compact, ergonomic design
Anixter No. Vendor No.
Description
394251
500031
CCTV Modular RCA Balun
The Stereo AV/IR Pass-Thru Balun (500048, 500049) allows one (1) composite video,
one (1) stereo audio and one (1) IR emitter signal to be transmitted via a single Cat
5e/6 cable in a point-to-point connection. The Stereo AV/IR Pass-Thru Balun features
full audio bandwidth response for high-fidelity applications and features built-in
color-coded cable leads for ease of installation.
Request the latest literature and guides from Anixter.
6.58
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 59 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
MuxLab
Baluns;Audio/16066
Index1.Networking Systems//Video Products//Video Security Systems
Stereo PC-Audio Balun
MUXLAB INC
PR23323V2-163229.eps
• Latching mechanism for secure installation
• Supports up to six baluns
• Snap-in design for ease of installation
• Baluns install front- or rear-facing
• Includes four rack-mount screws and washers
• Slot number silkscreen on front and rear
• Blank Filler Modules (500901) sold separately
Anixter No. Vendor No.
Description
420919
500902
Rackmount Balun Chassis 6
Baluns;Audio/Video/17211
Index 1.Networking Systems//Video Products//Video Security Systems
Component Video/Stereo Audio Wall Plate Balun - US
MUXLAB INC
PR28497V2-208790.eps
FEATURES
• Cost-efficient cabling
• Up to 5,000 ft. (1.5 km) via Cat 5/6 UTP
• Built-in 3.5mm stereo plug lead
• Quicker moves, adds and changes
• Compact design
Anixter No. Vendor No.
Description
394252
500030
Stereo PC-Audio Balun
Baluns;Accessory/17210
Index1.Networking Systems//Video Products//Video Security Systems
Rackmount Balun Chassis 6
MUXLAB INC
PR28493V2-208793.eps
The Rackmount Balun Chassis 6 is designed as a headend cable management
solution to allow any combination of MuxLab square baluns to be installed in a 19 in.
relay rack. Headend A/V equipment such as DVD players, video servers and satellite
boxes may be installed in a local wiring closet and connected to the Cat 5 structured
cabling system via a wide array of MuxLab balun solutions. The panel is
custom-tailored to allow any combination of up to six MuxLab baluns to be installed.
The baluns may be installed with the RJ45 either front or rear facing depending on
where the Cat 5 cabling will enter or exit the system. At the display end, the
appropriate MuxLab baluns are installed at the display to support a fully Cat 5
cabling solution. Each balun snaps into place and is held firmly by a spring latching
mechanism. The one-piece design makes the product easy to install and maintain.
There are no parts to lose or replace. Blank Filler Modules (500901) may be ordered
separately to fill in unused slot positions.
FEATURES
• Space-efficient - 1U height
• One-piece design
The Component Video/Stereo Audio Wall Plate Balun (500058-WP-US) allows one
component video (YPbPr or RGB) signal and one (1) Stereo Audio channel to be
transmitted via one (1) Cat 5e/6 twisted-pair cable for more cost-efficient cabling.
The product fits Decora compatible outlet boxes for neater wall-mount installation.
Used in pairs or in conjunction wih the 500058, the Component Video/Stereo Audio
Balun supports high-definition resolution and true left/right stereo audio for
hi-fidelity commercial and residential A/V applications.
FEATURES
• Supports true Hi-Fi left/right analog stereo audio ground loop coupling (GLC)
(U.S. Patent pending)
• Decora compatible wall plate standard
• Modular shielded RJ45 connector
• Not compatible with 500050/51/52/53/54/55/56/57/250/251/252/253
Anixter No. Vendor No.
Description
420923
500058-WP-US
Component Video/Stereo Audio Wall
Plate Balun
Baluns;Audio/Video/17212
Index 1.Networking Systems//Video Products//Video Security Systems
Active VGA/Audio Balun Kit
MUXLAB INC
PR28498V2-208787.eps
The Active VGA/Audio Balun Kit (500145) allows VGA and stereo or digital audio to be
transmitted via cost-efficient unshielded copper twisted-pair cable in a
point-to-point configuration. The product also supports RS-232, is DDC-compliant
and works in conjunction with MuxLab's IR Emitter (500998) and IR Sensor (500999)
to support IR source control. Tx and Rx also sold separately. The product supports up
to 1,920x1,200 resolution and features manual brightness, sharpness and skew
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.59
Video Transmission and Wireless
The Stereo PC-Audio Balun allows unbalanced line level stereo analog audio to be
transmitted via Category 5/6 unshielded copper twisted pair (UTP) in a point-to-point
connection. The product is designed for audio equipment with 3.5 mm line-level
stereo output such as PC sound cards, laptops and multimedia servers where
midrange audio-frequency response is required. The Stereo PC-Audio Balun also
works in conjunction with other MuxLab products such as the 500019, 500001,
500012, 500017, 500027, 500028 and 500200 for a more complete
cabling solution.
Revise - Sec06 Video Transmission and Wireless.fm Page 60 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
MuxLab
adjustments. Applications include: digital signage, residential, boardroom,
classroom and medical-imaging video systems.
FEATURES
• Up to 600 ft. (180 m) via Cat 5e/6 @ 1,920x1,200
• Supports analog stereo or digital audio
• Supports RS-232 or IR control
• DDC1/DDC2 (plug-and-play) compliant
• Brightness, sharpness and skew adjustments
• Local VGA/audio monitor output
• Ground loop isolation
Anixter No. Vendor No.
Description
420945
500145
Active VGA/Audio Balun kit (includes 1 Tx
and 1 Rx)
Baluns;Audio/Video/17213
Index1.Networking Systems//Video Products//Video Security Systems
VGA 4x1 Switcher
Video Transmission and Wireless
MUXLAB INC
PR28499V2-208784.eps
D
The VGA 4x1 Switcher allows up to four (4) VGA (RGBHV) sources to be switched to
one (1) display via Cat 5e/6 cable for more cost-efficient cabling. The switcher works
in conjunction with the Active VGA Balun II (500140) and Active VGA Balun II
Transmitter (500141). At least one (1) 500140 is required to support one (1) source
and one (1) display. Up to three (3) additional 500141 may be added to support up to
three (3) additional sources.
FEATURES
• Auto and Manual switching modes
• Control via: manual, IR, RS-232 and USB
• Plug-and-Play - DDC-compliant
• Remote power up to 150 ft. (46 m)
• Modular RJ45 on input and output
• Supports up to 1,920x1,440, 1080p
• Includes GUI software and IR remote
• Works in conjunction with 500140/141/142
• May be cascaded with VGA 1x4 Hub (500150)
Anixter No. Vendor No.
Description
420947
500160
VGA 4X1 Switcher, 110 V
Baluns;Audio/17214
Index 1.Networking Systems//Video Products//Video Security Systems
Stereo AV/IR Pass-Thru Wall Plate Balun - US
MUXLAB INC
The Stereo AV/IR Pass-Thru Wall Plate Balun (500049-WP-US) allows one (1)
composite video, one (1) stereo audio and one (1) IR emitter signal to be transmitted
via a single Cat 5e/6 cable in a point-to-point connection. The Stereo AV/IR Pass-Thru
Wall Plate Balun features full audio bandwidth response for high-fidelity applications
and is Decora compatible. The Stereo AV/IR Pass-Thru Wall Plate Balun works in pairs
or in conjunction with the 500048 or 500049. Some of the applications are:
classroom video distribution, commercial and home audio/video systems, hospital
video training, videoconferencing and video kiosks.
FEATURES
• Video up to 2,200 ft. (670 m) via Cat 5e/6
• Audio up to 3,250 ft. (990 m) via Cat 5e/6
• 20 Hz to 20 kHz audio bandwidth
• IR two-wire emitter pass-thru on fourth twisted pair
• Built-in color-coded cable leads
• Compatible with Decora face plates
Anixter No. Vendor No.
Description
420948
500049-WP-US
Stereo AV/IR Pass-Thru Wall Plate Balun
Request the latest literature and guides from Anixter.
6.60
PR28500V2-208781.eps
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 61 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
MuxLab
Baluns;Audio/17215
Baluns;Audio/18184
Index1.Networking Systems//Video Products//Video Security Systems
Index 1.Networking Systems//Video Products//Video Security Systems
MonoPro XLR
Stereo Hi-Fi Wall Balun
MUXLAB INC
PR28502V2-208775.eps
PR28501V2-208778.eps
PR35127V2-268877.eps
The Stereo Hi-Fi Wall Balun (500028-WP-US) allows unbalanced line level stereo
analog audio to be transmitted via Category 5e/6 unshielded copper twisted pair
(UTP) in a point-to-point connection. The product is designed for audio applications
where full-range, hi-fidelity audio frequency response is required.
FEATURES
• 20 Hz to 20 KHz bandwidth
• Cost-efficient cabling
• Up to 3,250 ft. (1 km) via Cat 5e/6 UTP
• Quicker moves, adds and changes
• Compatible with Decora face plates
Anixter No. Vendor No.
Description
448597
500028-WP-US
Stereo Hi-Fi Wall Balun
Baluns;Audio/Video/18185
Index 1.Networking Systems//Video Products//Video Security Systems
Quad Audio Wall Balun
MUXLAB INC
Anixter No.
306927
306928
Vendor No.
500025
500026
Description
MonoPro XLR, XLR3M
MonoPro XLR, XLR3F
PR35128V2-268875.eps
The Quad Audio Wall Balun (500033-WP-US) allows up to four (4) analog line audio
signals to be transmitted via unshielded twisted-pair (UTP) cable in a point-to-point
connection. Used in pairs, the Quad Audio Wall Balun allows up to four (4) coax audio
cables to be replaced by one (1) Cat 5e/6 cable. The Quad Audio Balun also works in
conjunction with other MuxLab analog audio baluns such as the 500019.
FEATURES
• Cost-efficient cabling - save up to four (4) cables
• 20 Hz to 20 KHz bandwidth for high fidelity
• Analog audio up to 3,250 ft. (1.0 km) via Cat 5e/6
• Compact design for neater wiring
• Compatible with Decora faceplates
Anixter No. Vendor No.
Description
448600
500033-WP-US
Quad Audio Wall Balun
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.61
Video Transmission and Wireless
The MonoPro XLR (500025, 500026) allows a standard AES analog or digital audio
channel to be connected via Cat 5e/6 unshielded twisted-pair cable (UTP) for the
professional audio environment. The product features heavy-duty cable strain relief
for rugged environments such as rental and staging and is available with male or
female locking XLR3 connectors for added cabling versatility. May also be used as a
solderless connection point for standard shielded audio cable.
FEATURES
• Line analog audio up to 5,000 ft. (1.5 km) via Cat 5
• Digital audio up to 1,400 ft. (426 m) via Cat 5e/6 UTP
• Wires terminate inside balun
• Locking XLR3 connector
• Heavy-duty cable strain relief
• Supports UTP or STP
MUXLAB INC
Revise - Sec06 Video Transmission and Wireless.fm Page 62 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
MuxLab
Baluns;Audio/Video/18186
Baluns;Audio/Video/18188
Index1.Networking Systems//Video Products//Video Security Systems
Index 1.Networking Systems//Video Products//Video Security Systems
Passive CCTV Power Integrator Hub 24 V AC
Video Transmission and Wireless
MUXLAB INC
Component/Composite Video ProAV Balun
PR35121V2-269396.eps
The Passive CCTV Power Integrator Hub allows video, remote power and PTZ control to
be transmitted via one Cat 5e/6 cable between the CCTV camera and the DVR/IP
encoder in the security video environment. The product features a built-in 16-channel
CCTV power supply (350 VA) that supplies 24 V AC or 28 V AC to each CCTV camera.
The hub works in conjunction with MuxLab's 500000R, 500009, 500022, 500023,
500024 and 500029 CCTV baluns.
FEATURES
• Built-in 16-channel 350 VA PSU
• Voltage-selector switch per port: 24 V AC or 28 V AC
• Port configuration: power-thru or pass-thru mode
• 2U rack height
• Auto-resettable fuses on each port
• Seamless integration with 500130, 500022, 500024
• Manufacturer'sD five-year warranty
Anixter No. Vendor No.
Description
451341
500136-US
Passive CCTV Power Integrator Hub,
24 V AC
MUXLAB INC
The Component/Composite Video ProAV Balun (500056-Pro) allows one component
video (YPbPr or RGB) signal plus one composite video signal to be transmitted via one
Cat 5e/6 twisted-pair cable for more cost-efficient cabling. The 500056-Pro features
Ethercon - RJ45, ruggedized cast-aluminum enclosure and built-in 12-inch (30 cm)
heavy-duty A/V cable leads for the demanding professional environment. The
500056-Pro may be used in pairs or in conjunction with other MuxLab component
video baluns.
FEATURES
• Supports 1080i/p up to 500 ft. (152 m) via Cat 5e/6
• Supports composite video on fourth twisted pair
• Ethercon - RJ45 connector for cable strain relief
• Ruggedized cast-aluminum enclosure
• Heavy-duty 12-inch (30 cm) built-in cable leads
• Compatible with 500056
Anixter No. Vendor No.
Description
448607
500056-PRO
Component/Composite Video ProAV Balun
Baluns;Audio/Video/18189
Index 1.Networking Systems//Video Products//Video Security Systems
CCTV IP Extender Kit
MUXLAB INC
PR35130V2-268874.eps
Baluns;Audio/Video/18187
Index1.Networking Systems//Video Products//Video Security Systems
Component Video/Analog Audio ProAV Balun
MUXLAB INC
The Component Video/Analog Audio ProAV Balun (500052-Pro) allows one component
video (YPbPr or RGB) signal and one combined left/right analog audio signal to be
transmitted via one Cat 5e/6 twisted-pair cable for more cost-efficient cabling. The
500052-Pro features Ethercon - RJ45, ruggedized cast-aluminum enclosure and
built-in 12-inch (30 cm) heavy-duty A/V cable leads for the demanding professional
environment. The 500052-Pro may be used in pairs or in conjunction with other
MuxLab component video baluns.
FEATURES
• Supports 1080i/p up to 500 ft. (152 m) via Cat 5e/6
• Supports analog audio on fourth twisted pair
• Ethercon RJ45 connector for cable strain relief
• Ruggedized cast-aluminum enclosure
• Heavy-duty 12-inch (30 cm) built-in cable leads
• Available with RCA or BNC
• Compatible with 500052, 500052-WP
Anixter No. Vendor No.
Description
448605
500052-PRO-BNC Component Video/Analog audio ProAV
balun, BNC-M
448606
500052-PRO-RCA Component Video/Analog audio ProAV
balun, RCA-M
The CCTV IP Extender Kit (500110) allows any CCTV IP camera to be connected over
extended distance via Cat 5e or coax cable. The 500110 supports up to two IP
cameras up to 650 ft. (200 m) at 100 Mbps and up to 1 mile (1.6 km) at 25 Mbps.
FEATURES
• Extend distance between IP camera and 10/100BASE-T LAN
• Supports up to two (2) IP cameras
• Via coax or Cat 5e/6 (1 twisted pair)
• Up to 650 ft. (200 m) @ 100 Mbps
• Up to 1 mile (1.6 km) @ 25 Mbps
Anixter No. Vendor No.
Description
448609
500056-PRO
CCTV IP Extender Kit
Request the latest literature and guides from Anixter.
6.62
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 63 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
MuxLab
Baluns;Audio/Video/18190
Baluns;HDMI/18192
Index1.Networking Systems//Video Products//Video Security Systems
Index 1.Networking Systems//Video Products//Video Security Systems
HD-SDI Extender Kit
MUXLAB INC
HDMI 4x4 Cat 5e/6 Matrix Switch
PR35122V2-269398.eps
The HD-SDI Extender Kit allows HD-SDI to be transmitted up to 330 ft. (100 m) via Cat
5e cable at all resolutions in a point-to-point configuration. The HD-SDI Extender Kit
supports transmission of up to 2.97/3.0 Gbps uncompressed, un-encrypted digital
video (optionally including embedded Audio and/or Time Code) within television
facilities and between professional video equipment.
Baluns;CATV/18191
Index1.Networking Systems//Video Products//Video Security Systems
Shielded CATV Balun
MUXLAB INC
PR35132V2-268878.eps
PR35123V2-269400.eps
The HDMI 4x4 Matrix Switch (500415) allows up to four (4) different HDMI sources to
be connected and/or distributed to up to four (4) HDMI displays via Cat
5e/6 unshielded twisted-pair cables. The product works in conjunction with MuxLab's
HDMI IR/Receivers (500407 or 500417) supporting up to 150 ft. (45 m) at 1080p
Deep Color via Cat 5e cable.
FEATURES
• HDMI 1.3a 4x4 matrix via two (2) Cat 5e/6
• Control options: Manual, IR, USB, GUI, Web
• Up to 150 ft. (45 m) @ 1080p/8-bit via Cat 5e
• Up to 90 ft. (27 m) @ 1080p/12-bit via Cat 5e
• Supports IR matrix and source control
• Includes four IR emitters plus wireless remote
Anixter No. Vendor No.
Description
450006
500415
HDMI 4x4 Cat5e/6 Matrix Switch
Baluns;HDMI/18193
Index 1.Networking Systems//Video Products//Video Security Systems
HDMI IR Receiver with Source Control
MUXLAB INC
The Shielded CATV Balun (500306) allows RG-6 coaxial cable to be replaced by Cat
5e/6/7 STP or UTP cable in the terrestrial RF environment. Used in pairs, the Shielded
CATV Balun allows broadband CATV equipment to be integrated into a structured
cabling system thereby allowing CATV equipment to be moved or added to any
convenient modular wall outlet. When used with Cat 5e/6/7 shielded twisted-pair
cable, the connection supports greater RF ampliflication and therefore greater
distance with less EMI/RFI egress versus other UTP CATV baluns. The Shielded CATV
Balun also works in conjunction with MuxLab's CATV Hub (500300/303) for a total
cabling solution.
FEATURES
• Bandwidth up to 860 MHz including Internet, digital cable
• Supports Cat 5e/6/7 STP and UTP
• Fits side-by-side on most RF splitters
• Lower EMI /RFI egress when STP is used
• Cast-aluminum enclosure for maximum EMI/RFI shielding
• Low insertion loss
Anixter No. Vendor No.
Description
450005
500306
Shielded CATV Balun
PR35133V2-268868.eps
The HDMI IR/Receiver with Source Control (500417) allows any HDMI source to be
selected via MuxLab's HDMI 4x4 Matrix Switch from the remote display. Also, the
product features an IR jack to allow the HDMI source to be controlled. The product
supports 1080p Deep Color up to 150 ft. (46 m) via two (2) Cat 6 cables and includes
one (1) IR Sensor and one (1) power supply.
FEATURES
• Up to 150 ft. (46 m) @ 1080p Deep Color via Cat 6
• Up to 300 ft. (91 m) @ 1080i via Cat 5e/6
• Connect via two (2) Cat 5e/6 cables
• Includes IR Sensor and handheld remote
• Push-button control
Anixter No. Vendor No.
Description
450007
500417
HDMI IR Receiver with Source Control
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.63
Video Transmission and Wireless
FEATURES
• Up to 330 ft. (100 m) via Cat 5e cable
• Up to 400 ft. (122 m) via Cat 6 cable
• Supports SDI-SMPTE 259M-C (270 Mbps) HD-SDI-SMPTE 292M (1.485,
1.485/1.001 Gbps) HD-SDI-SMPTE 424M/425M (2.97/3.0 Gbps)
• LED diagnostics: Sync, SDI detect
Anixter No. Vendor No.
Description
449997
500700
HD-SDI Extender Kit
MUXLAB INC
Revise - Sec06 Video Transmission and Wireless.fm Page 64 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Firetide
HOTPORT 7000 - OUTDOOR
./Wireless;Mesh Node/16187
Index1.Networking Systems//Video Products//Video Security Systems
PR28564V2-209174.eps
Firetide HotPort 7000 MIMO-802.11n Wireless Nodes
FIRETIDE
Firetide HotPort 7000 mesh nodes provide fiber-equivalent throughput and reliability
over wireless Ethernet, delivering true wireless infrastructure capabilities for
large-scale municipal, public safety, industrial and transportation deployments.
FEATURES
• Fiber-like speed with up to 400 Mbps throughput, exceeding that of current
wired solutions such as T1, Fast Ethernet or OC-3 fiber
• Ease of deployment with the self-forming nature of Firetide infrastructure mesh
• Ease of network management and planning with advanced utilities: antenna
alignment and integrated spectrum analysis
• Reliable multicast capabilities for real-time evidence-grade video streaming to
multiple destinations
• Flexible configuration with operation in 2.4 GHz, 4.9 GHz (U.S. public safety) or
5 GHz frequency bands
Video Transmission and Wireless
HOTPORT 7000 - INDOOR
434819
Vendor No.
7010
7010-FIPS
Vendor No.
7020
434818
7020-FIPS
PR28565V2-209175.eps
D
Anixter No.
424454
Anixter No.
424457
Description
HotPort 7100, indoor MIMO-802.11n
capable, dual radio, triband spectrum
2.4 GHz/4.9 GHz/5 GHz, 400 mW, wireless
mesh node, includes power supply
desktop brick 12 V DC, two-meter North
America AC power cable, six dual-band
2.4 GHz and 5 GHz 3 dBi antennas,
documentation CD and hardware
installation guide; only single radio
enabled; second radio enabling requires
purchase of SW-7000-RADIO-1; 11n MIMO
functionality requires purchase of
SW-7000-MIMO license
HotPort 7100, indoor MIMO-802.11n
capable, FIPS 140-2 NIST compliant, dual
radio, tri-band spectrum
2.4 GHz/4.9 GHz/5 GHz, 400 mW, wireless
mesh node, includes power supply
desktop brick 12 V DC, two-meter North
America AC power cable, six dual-band
2.4 GHz and 5 GHz 3 dBi antennas;
documentation CD and hardware
installation guide; only single radio
enabled; second radio enabling requires
purchase of SW-7000-RADIO-1; 11n MIMO
functionality requires purchase of
SW-7000-MIMO license
Description
HotPort 7020, outdoor MIMO-802.11n
capable, dual radio, tri-band spectrum
2.4 GHz/4.9 GHz/5 GHz, 400 mW, wireless
mesh node, five-meter North America AC
power cable, six dual-band 2.4 GHz and
5 GHz 3 dBi antennas, three
RJ45 weatherized Ethernet connectors,
documentation CD and hardware
installation guide; only single radio
enabled; second radio enabling requires
purchase of SW-7000-RADIO-1; 11n MIMO
functionality requires purchase of
SW-7000-MIMO license
HotPort 7020, outdoor MIMO-802.11n
capable, FIPS 140-2 NIST compliant, dual
radio, tri-band spectrum
2.4 GHz/4.9 GHz/5 GHz, 400 mW, wireless
mesh node, five-meter North America AC
power cable, six dual-band 2.4 GHz and
5 GHz 3 dBi antennas, three
RJ45 weatherized Ethernet connectors,
documentation CD and hardware
installation guide; only single radio
enabled; second radio enabling requires
purchase of SW-7000-RADIO-1; 11n MIMO
functionality requires purchase of
SW-7000-MIMO license
HOTPORT 7000 SERIES SOFTWARE
Anixter No. Vendor No.
Description
394208
SW-7000-RADIO-1 7000 Series radio license; electronic
license allows user to enable and use the
second radio in the Firetide 7000 series
product for a single node
424462
SW-7000-MIMO
7000 Series MIMO license allows user to
enable and use the MIMO functionality
(11n) on the Firetide 7000 series product
for a single node
Request the latest literature and guides from Anixter.
6.64
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 65 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Firetide
Wireless;Antennas/16194
Index1.Networking Systems//Video Products//Video Security Systems
Firetide Antenna Assemblies for HotPort 7000 Mesh Nodes
FIRETIDE
Customized antennas designed to work with Firetide 7000 mesh nodes are suited for
both outdoor and indoor installations. Customers choose the specific antenna based
on the installation requirements, directional or omnidirectional, and frequencies
ranging from 4.9 to 6.1 GHz or 2.3 to 2.7 GHz.
FEATURES
• Each antenna contains three active antenna elements capable of transmitting
and receiving data
• Antennas are MIMO-aware; the elements are polarized to maximize the
MIMO effectiveness
• Antennas are easy to install and replace; wall or pole mountable
120-DEGREE SECTOR ANTENNAS
Anixter No. Vendor No.
Description
397486
AS120-024-MIMO-11 120-degree sector antenna, BSA MIMO
3x3, 2.3-2.7 GHz, 3x11.5 dBi gain
397845
AS120-055-MIMO-15 120-degree sector antenna, BSA MIMO
3x3, 4.9-6.1 GHz, 3x15 dBi gain
HOTPOINT 5000 - INDOOR
Anixter No.
424473
Vendor No.
5100
PR29021V2-215016.eps
Description
HotPoint 5100 MIMO access point, indoor,
includes Firetide MIMO access point (dual
radio 802.11 a/b/g/n, 100 mW), AC to DC
power adapter with region-specific power
cable, six dual-band 2.4 GHz and 5 GHz
3 dBi antennas for staging, one
RJ45 Ethernet cable
HOTPOINT 5000 - OUTDOOR
PR29022V2-215017.eps
20-DEGREE PATCH ANTENNA
Anixter No. Vendor No.
Description
403367
AP20-050-MIMO-19 20-degree patch antenna, BSA MIMO 3x3,
4.9-6.1 GHz, 3x19 dBi gain
OMNIDIRECTIONAL ANTENNAS
Anixter No. Vendor No.
403365
AO-024-MIMO-8
414061
AO-050-MIMO-9
Description
Omnidirectional BSA, MIMO 3x3,
2.3-2.7 GHz
Omnidirectional BSA, MIMO 3X3,
4.9-6.1 GHz, 3x9 dBi gain
Anixter No.
424475
Vendor No.
5200
Wireless;Access Points/17468
Index1.Networking Systems//Video Products//Video Security Systems
Firetide HotPoint 5000 MIMO Access Points
FIRETIDE
Firetide HotPoint 5000 MIMO wireless access points deliver a modular access
solution for large-scale, indoor and outdoor wireless networks. Modular design
enables full network and software integration of the access points with a Firetide
wireless mesh network while at the same time permitting independent physical
placement directly connected to a wired network to provide optimal accessibility for
Wi-Fi clients.
FEATURES
• Seamless indoor and outdoor operation
• Modular design for integration with a Firetide wireless mesh network
• Single-point network management for mesh and access points with HotView
Pro software
• Create logical networks with varying levels of security, access and performance
Description
HotPoint 5200 MIMO access point,
outdoor, includes Firetide MIMO access
point (dual radio 802.11 a/b/g/n,
100 mW), pole-mounting bracket, PoE
injector, one RJ45 Ethernet cable for
staging, one weatherized Ethernet kit, six
dual-band 2.4 GHz and 5 GHz 3 dBi
antennas for staging
Wireless;Mesh Access Points/14239
Index 1.Networking Systems//Video Products//Video Security Systems
Firetide HotPoint 4100 Access Points
FIRETIDE
Firetide HotPoint 4100 wireless access points deliver a modular access solution for
large-scale, indoor and outdoor wireless networks. Modular design enables full
network and software integration of the access points with a Firetide wireless mesh
network while at the same time permitting independent physical placement directly
connected to a wired network to provide optimal accessibility for Wi-Fi clients.
FEATURES
• Seamless indoor and outdoor operation
• Modular design for integration with a Firetide wireless mesh network
• Single-point network management for mesh and access points with HotView
Pro software
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.65
Video Transmission and Wireless
90-DEGREE SECTOR ANTENNAS
Anixter No. Vendor No.
Description
397481
AS90-024-MIMO-13 90-degree sector antenna, BSA MIMO 3x3,
2.3-2.7 GHz, 3x13 dBi gain
424823
AS90-055-MIMO-16-T Triple-polarized 90-degree sector antenna,
BSA MIMO 3x3, 4.9-6.1 GHz, 3x16 dBi gain
• Designed for Hot Spots - supports virtual APs and virtual AP groups
• Advanced security and performance features (WPA and WEP encryption)
Revise - Sec06 Video Transmission and Wireless.fm Page 66 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Firetide
• Create logical networks with varying levels of security, access and performance
• Designed for Hot Spots - supports up to four virtual APs and virtual AP groups
• Advanced security and performance features (WPA and WEP encryption)
• High-power radios with up to 400 mW provide extended reach and penetration
HOTPOINT 4100 - INDOOR
Video Transmission and Wireless
Anixter No.
384861
Vendor No.
4100
PR21639V2-124465.eps
Description
Hotpoint 4100 access point, indoor, includes
Firetide access point (802.11 b/g, up to
400 mW), AC/DC power-supply adapter, kit of
international plugs - USA, EU, UK, AUS, two
2.4 GHz 5 dBi antennas,
management software
HOTPOINT 4200 - OUTDOOR
PR21640V2-124469.eps
D
sophisticated, yet simple-to-use platform for configuring, monitoring and managing
HotPort mesh nodes, HotPoint access points and HotClient Customer Premises
Equipment (CPEs).
FEATURES
• Unique flow control, traffic prioritization and network management capabilities
• Ethernet Direct - allows interconnection with a 100 Mbps wired connection to
reduce hop counts
• Mesh bridge integration - connect multiple mesh networks into a
single environment
• End-to-end security - AES 128 or 256, WPA2 and/or WEP at 104/128 or
40/64 bits
• Unmatched mobility - real-time video from moving vehicles with
seamless roaming
• Highly flexible real-time mesh network management
• Intuitive GUI interface
• Single-point management of mesh and access products
ELECTRONIC LICENSES
Anixter No. Vendor No.
Description
384862
3000-9000-ELE-10 HotView Pro mesh management software,
electronic license is per 10 nodes
managed (integrated HotPort mesh and
HotPoint access point or stand-alone
HotPoint access point)
333051
3000-9000-ELE
HotView Pro mesh management software,
electronic license is per 30 nodes
managed (integrated HotPort mesh and
HotPoint access point or stand-alone
HotPoint access point)
CONTROLLERS
Anixter No. Vendor No.
448365
FWC 1000
Anixter No.
384360
Vendor No.
4200
Description
Hotpoint 4200 access panel, outdoor,
(802.11b/g.400 mW), integrated panel
antenna, PoE injector with North America
AC power cable, pole-marking bracket,
management software
448364
FWC 2000
448366
FMC 2000
Wireless;Management Software/14242
Index1.Networking Systems//Video Products//Video Security Systems
Firetide HotView Pro Management Software
FIRETIDE
PR21638V2-124464.eps
Description
WLAN controller for 50 access points,
includes four 10/100/1000 Mbps ports,
one Ethernet RJ45 cable, power supply
desktop brick 12 V DC, one 2-meter North
America AC power cable
Rack-mountable WLAN controller for
50 access points, supports scaling up to
150 with stacking of three controllers,
includes four 10/100/1000 Mbps ports,
one Ethernet RJ45 cable, power supply
desktop brick 12 V DC, one 2-meter North
America AC power cable
Mobility controller for mobility up to
64 meshes, four 10/100/1000 Mbps
ports, one Ethernet RJ45 cable, power
supply desktop brick 12 V DC, one 2-meter
North America AC power cable
HotView Pro provides centralized management and control of single or multiple
Firetide mesh networks with an intuitive Web-based user interface. It is a
Request the latest literature and guides from Anixter.
6.66
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 67 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Firetide
Wireless;Access Points/15162
Wireless;Point-to-Point Bridge/17264
Index1.Networking Systems//Video Products//Video Security Systems
Index 1.Networking Systems//Video Products//Video Security Systems
Firetide HotClient 2100 Customer Premises Equipment (CPE)
Firetide Point-to-point Wireless Bridge
FIRETIDE
Firetide HotClient 2100 customer premises equipment (CPE) provides a secure and
reliable solution for extending the reach of outdoor wireless mesh networks indoors.
HotClient CPE enables network operators deploying municipal and enterprise wireless
networks the ability to maintain optimal user experience and connectivity anywhere.
FIRETIDE
FEATURES
• Works indoors and outdoors with excellent wireless connectivity
• Centralized management via HotView Pro Network Management Software
• Ability to configure and enforce service level agreements (SLA)
• RADIUS server management
• Built-in standards-based security features including: WEP2, AES 128/256,
RADIUS, SSID, MAC access control, NAT, VLAN and digital certificates
HOTCLIENT 2100 - INDOOR
Vendor No.
2100
HOTCLIENT 2200 - OUTDOOR
Anixter No.
362300
Vendor No.
2200
Description
HotClient 2100 customer premises
equipment, indoor, includes Firetide CPE
(802.11 b/g, 400 mW), AC/DC power
supply adapter, kit of international plugs USA, EU, UK, AUS, two 2.4 GHz 5 dBi
antennas, management software
Firetide FWB-100 outdoor wireless Ethernet bridges provide low-cost, high-capacity
connectivity between two locations. FWB-100 is software-configurable for 2.4, 5 and
4.9 GHz and achieves up to 35 Mbps of throughput. Deployed as a stand-alone
solution, the FWB-100 link is managed via a browser-based management interface.
FEATURES
• Point-to-point connectivity between two locations
• Shipped preconfigured for an easy "out-of-the-box" installation experience
• Browser-based management interface
• Antenna alignment tool for maximum signal quality
• WPA2 - PSK (Wi-Fi Protected Access) encryption
Anixter No. Vendor No.
Description
418535
FWB-105
Firetide outdoor wireless bridge includes a
pair of FWB-102 wireless nodes (2.4,
5 and 4.9 GHz capable 400 mW) bundled
with two outdoor 5/4.9 GHz 23 dBi panel
antennas, a pair of PoE injectors with
North America AC power cable, pair of
pole-mounting brackets,
http-based management
PR21640V2-124469.eps
Description
HotClient 2200 customer premises
equipment, outdoor, includes Firetide CPE
(802.11 b/g, 400 mW) with integrated
panel antenna, PoE injector with North
America AC power cable, pole-mounting
bracket, management software
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.67
Video Transmission and Wireless
Anixter No.
362296
PR21639V2-124465.eps
PR21640V2-124469.eps
Revise - Sec06 Video Transmission and Wireless.fm Page 68 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Firetide
Wireless;Point-to-Point Bridge/17471
Wireless;Integrated Video/16199
Index1.Networking Systems//Video Products//Video Security Systems
Index 1.Networking Systems//Video Products//Video Security Systems
Firetide Point-to-point MIMO Wireless Bridge
FIRETIDE
PR29022V2-215017.eps
Firetide IVS-100 Integrated Video Solution Exclusively Available Through Anixter
Video Transmission and Wireless
FIRETIDE
Firetide FWB-205 outdoor wireless Ethernet bridges provide low-cost, high-capacity
connectivity between two locations. FWB-205 is software-configurable for 2.4, 5 and
4.9 GHz and achieves up to 150 Mbps of throughput. Deployed as a stand-alone
solution, the FWB-205 link is managed via HotView Pro or a browser-based
management interface.
FEATURES
• Point-to-point connectivity between two locations
• Shipped preconfigured for an easy "out-of-the-box" installation experience
• Browser-based management interface
• Antenna alignment tool for maximum signal quality
• WPA2 - PSK (Wi-Fi Protected Access) encryption
Anixter No. Vendor No.
Description
424467
FWB-205
Firetide MIMO Outdoor Wireless Bridge D
bundled with panel antenna. Includes a
pair of FWB205 wireless nodes (5 and
4.9 Ghz-capable 400 mW), a pair of PoE
injectors, a pair of RJ45 Ethernet cables, a
pair of AP20-050-MIMO-19 antenna with
six CB-015-N antenna cables;
http-based management
PR23416V2-164454.eps
Incorporating a Firetide HotPort wireless mesh node, IP camera or analog video
camera with an encoder, and optional storage, the system simplifies integration and
installation of video-surveillance projects. Designed for rapid deployment, the
Firetide IVS-100 delivers wireless connectivity, real-time video and edge-of-network
storage in a single form factor.
FEATURES
• Ethernet, fiber and/or wireless mesh connectivity
• High-powered wireless radios: 2.4, 4.9 (U.S. public safety licensed band) and
5 GHz
• Option of either an IP or analog camera
• Optional blue light for added visibility
• Improved aesthetics of video-surveillance deployments
The Firetide IVS-100 is sold exclusively through us!
Contact your local sales representative for product configuration.
Wireless;Mounting Solutions/16198
Index 1.Networking Systems//Video Products//Video Security Systems
Firetide Mounting Solutions
FIRETIDE
Anixter No.
333071
367188
Vendor No.
3100-5101
MT-6100
Description
HotPort 3000 and HotPoint 4500 family
indoor-mounting kit for wall, upright,
ceiling and office panel (cubicle)
installation, 10 machine screws
HotPort 6100 family indoor-mounting kit
for wall, upright, ceiling and office panel
installation, 10 machine screws
Request the latest literature and guides from Anixter.
6.68
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 69 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Firetide
Wireless;Antennas/14240
Index1.Networking Systems//Video Products//Video Security Systems
Firetide Antenna Assemblies
FIRETIDE
PR13649V2-31811.eps
SECTOR ANTENNAS
Anixter No. Vendor No.
344730
AS-024-N
344733
OMNIDIRECTIONAL ANTENNAS
Anixter No. Vendor No.
344681
AO-050-N
403369
AO-900-8
333063
4000-1111
PANEL ANTENNAS
Anixter No. Vendor No.
344687
AP-050-N
403370
AP40-900-12
Description
4.9 to 5.8 GHz omnidirectional antenna
with 10 dBi gain, 1.5 meter
LMR400 cable, lightning suppressor with
N-type connector and pole-mount bracket
900 MHz omnidirectional antenna,
8 dBi gain
2.4 GHz omnidirectional antenna with
7.5 dBi gain, N-type connector, (for
HotPoint APs only)
Description
4.9 to 5.8 GHz subscriber panel antenna with
23 dBi gain (21 dB gain for 4.9 - 5.1),
1.5 meter LMR400 cable, lightning suppressor
with N-type connector and
Az/E1 adjustable mount
900 MHz 12 dBi panel antenna (43 x
42 degree beamwidth)
ANTENNA CABLE ASSEMBLIES
Anixter No. Vendor No.
367407
CB-015-N
434821
344735
Description
Antenna cable assembly, 1.5 meter
LMR400 with lightning suppressor,
N-type connector
CB-015-N-MIMO MIMO antenna cable assembly for 5200 and
7020, 3-in-1 bundled 1.5 meter
LMR-400 cables with integrated lightning
suppressor, N-type connector
CB-050-N
Antenna cable assembly, 5 - meter
LMR400 with lightning suppressor,
N-type connector
Wireless;Cable Assemblies/16196
Index 1.Networking Systems//Video Products//Video Security Systems
Firetide Cable Assemblies
FIRETIDE
Anixter No.
333066
Vendor No.
3200-2102
333067
3200-2103
333068
3200-2104
Description
Single Ethernet transition cable with watertight
Ethernet connector, 2 meters
10-meter power cable, HotPort 3200, 6200,
7020 series, DC to DC
30-meter power cable, HotPort 3200,
6200 and 7020 series, DC to DC
Wireless;Power/16197
Index 1.Networking Systems//Video Products//Video Security Systems
Firetide Power Sources and Cables
FIRETIDE
Anixter No.
367412
344736
Vendor No.
CB-030-P
PO-010-N
Description
4600 Series outdoor-rated 30 meter PoE cable
that connects the 4600 to HotPort
7000 Series outdoor-rated 10 meter
North America AC power cable
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.69
Video Transmission and Wireless
Firetide antenna assembly kits are available in 2.4 GHz, 5.1 to 5.8 GHz and 4.9 GHz
public-safety versions, omnidirectional, panel/patch and 90-degree sector antenna
configurations, providing antenna solutions to meet the needs of your deployment.
FEATURES
• Firetide-certified antenna assembly
• Outdoor antennas are unobtrusive so they blend with any environment
• Sturdy attachment solutions with precise adjustments for optimal
antenna performance
• Applicable for 2.4 GHz, 5.1 to 5.8 GHz, and 4.9 GHz public-safety deployments
• Includes 1.5 meter LMR-400 cable, lightning suppressor and mounting solution
• Omnidirectional, panel/patch and 90-degree sector configurations available
• Indoor and outdoor configurations
AS-050-N
Description
2.4 to 2.7 GHz 90-degree sector antenna with
15.5 dBi gain, 1.5 meter LMR400 cable,
lightning suppressor with N-type connector
and tilt mount
4.9 to 5.8 GHz 90-degree sector antenna with
16 dBi gain, 1.5 meter LMR400 cable,
lightning suppressor with N-type connector
and elevation-adjustable mount
Revise - Sec06 Video Transmission and Wireless.fm Page 70 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Verint
./Wireless;Transmitter/15091
Index1.Networking Systems//Video Products//Video Security Systems
Nextiva S4100 (Wireless)
VERINT VIDEO SOLUTIONS INC
PR21560V2-125636.eps
Video Transmission and Wireless
Wireless video encoder/transmitter and decoder/receiver for point-to-point
outdoor applications.
FEATURES
• Two units: encoder/transmitter and decoder/receiver
• Transmits over 2.4 or 5 GHz wireless band or 4.9 GHz U.S. or Canada
public-safety band
• MPEG-4-based video up to 4CIF/30 fps, with optimal bandwidth utilization
• Compact, weatherproof enclosure: Ideal for outdoor, point-to-point applications
• Built-in, multiband antenna for software-based frequency change
• Eliminates the need to install separate encoders and wireless transmitters
• More than double the capacity of previous devices, with improved bandwidth
utilization and image quality
Anixter No. D Vendor No.
Description
362718
S4100
Wireless point-to-point system
363427
S4100-49
Wireless point-to-point system for
4.9 GHz band
362713
S4100-2V
Wireless point-to-point system with two
video outputs
368627
S4100-2V-49
Wireless point-to-point system with two
video outputs for 4.9 GHz band
Wireless;Transmitter/15092
Index1.Networking Systems//Video Products//Video Security Systems
Nextiva S4200 (Wireless)
VERINT VIDEO SOLUTIONS INC
PR21561V2-125633.eps
• Connect up to 24 transmitters per access point, reducing equipment and
installation costs
• Transmits over 2.4 or 5 GHz wireless band or 4.9 GHz U.S. or Canada
public-safety band
• MPEG-4 based video up to 4CIF/30 fps, with optimal bandwidth utilization
• Camera-tampering detection and optional embedded video analytics
• More than double the capacity of previous devices, with improved bandwidth
utilization and image quality
Anixter No. Vendor No.
Description
362719
S4200
Wireless point-to-multipoint transmitter
363429
S4200-49
Wireless point-to-multipoint transmitter
for 4.9 GHz band
362720
S4200-2V
Wireless point-to-multipoint transmitter
with two video outputs
368631
S4200-2V-49
Wireless point-to-multipoint transmitter
with two video outputs for 4.9 GHz band
Wireless;Access Point/15097
Index 1.Networking Systems//Video Products//Video Security Systems
Nextiva S4300 (Wireless)
VERINT VIDEO SOLUTIONS INC
Wireless access point for point-to-multipoint outdoor applications.
FEATURES
• Wireless access point for outdoor, point-to-multipoint applications
• Uses license-free 2.4 or 5 GHz wireless band or the licensed 4.9 GHz U.S. or
Canada public-safety band
• Connect up to 24 Nextiva S4200 wireless transmitters per access point,
reducing equipment and installation costs
• Up to 28 Mbps capacity, with superior image quality, optimized bandwidth
utilization, and failover for high availability
• Simplified installation, with built-in wireless site survey tools and optional
Power over Ethernet (PoE)
Anixter No. Vendor No.
Description
362721
S4300-POE
Outdoor wireless access point, PoE
363430
S4300-POE-49
Outdoor wireless access point for
4.9 GHz, PoE
Video encoding and wireless transmission for point-to-multipoint
outdoor applications.
FEATURES
• Wireless video encoder/transmitter in a single, compact,
weatherproof enclosure
• Ideal for outdoor, point-to-multipoint applications when used with the Nextiva
S4300 access point
Request the latest literature and guides from Anixter.
6.70
PR23538V2-165757.eps
1.800.ANIXTER • anixter.com/literature
Revise - Sec06 Video Transmission and Wireless.fm Page 71 Tuesday, December 11, 2012 11:30 PM
Video Transmission and Wireless
Verint
Wireless;Video Transmitter System/12026
Index1.Networking Systems//Video Products//Video Security Systems
SmartLink-4000-5G (Wireless)
VERINT VIDEO SOLUTIONS INC
PR21564V2-125627.eps
Video Transmission and Wireless
Wireless point-to-point and point-to-multipoint applications for up to four cameras
for a complete end-to-end solution. These packages are easily expandable if extra
cameras are needed.
FEATURES
• SmartLink-4000-5G contains S4100 and all required accessories for
plug-and-play viewing
• SmartAccess-4000-3 for three-camera applications containing 3-S4200,
1-S4300, 3-S1970e-R and all required accessories for viewing in an
analog setting
• SmartAccess-4000-4 for four-camera applications containing 4-S4200,
1-S4300, 4-S1970e-R and all required accessories for viewing in an
analog setting
• Video encoding and transmission over the 2.4 and 5 GHz band using a built-in
antenna with a video performance at 40CIF/30 fps in any environment
Anixter No. Vendor No.
Description
362724
SMARTACCESS-4000-3 Wireless point-to-multipoint
application for three cameras
362725
SMARTACCESS-4000-4 Wireless point-to-multipoint
application for four cameras
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
6.71
Revise - Sec06 Video Transmission and Wireless.fm Page 72 Tuesday, December 11, 2012 11:30 PM
Infrastructure Matters.
The wrong cabling infrastructure can hinder the performance of even the most sophisticated video surveillance system.
'BDUPSTUIBUBGGFDUUIFQFSGPSNBODFPGDBCMJOHJOGSBTUSVDUVSFJODMVEF
t The migration of a security system to IP
t.JOJNBMMZDPNQMJBOU$BUFHPSZFDBCMF
t Increasing bandwidth requirements
t The need for Power over Ethernet Plus and beyond
t Installation practices
t Environmental conditions
t Quality of IP cable manufacturing
Anixter works with only industry leading manufacturers and
regularly tests our inventory in our Infrastructure Solutions Lab
to ensure you receive the highest quality solutions.
Make sure you’re getting the best infrastructure to support
your applications for today and beyond. Ask your Anixter sales
representative today to help you select the right products for
your needs.
For more information about our Infrastructure Solutions Lab or
on-site training, contact your local Anixter sales representative
BU"/*95&3
Products. Technology. Services. Delivered Globally.
Anixter is a leading global supplier of communications and security products, electrical and electronic wire and cable, fasteners and other small components. We help our customers specify
solutions and make informed purchasing decisions around technology, applications and relevant standards. Throughout the world, we provide innovative supply chain management solutions
to reduce our customers’ total cost of production and implementation.
";Ï"OJYUFS*OD
all_catalog_filler_pages.indd 18
1.800.ANIXTER
anixter.com
11/9/12 4:30 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement