DANE-ELEC PMP User manual

DANE-ELEC PMP User manual
User's Manual
Portable Media Player
Portable Media Player
Welcome
1 Getting Started
Welcome to DaneDigital website!
The DaneDigital home page provides the overview of company and products, other
related information, and answers to common questions. Firmware and software
updates are also available as well as the most recent information about your
Meizu by Dane-Elec product.
www.danedigital.com
Thank you for purchasing the product.
Please read the manual carefully before use.
We recommend you to keep it for future reference.
3
Table of Contents
Table of Contents
Important Cautions
7
Using Buttons / Menu Controls
25-27
Copyright Notice
8
Using Browser / Listening to Music
28-29
Product Features
9
Update the Music Library / Sorting the Music Library
30-31
Playback Mode / Sound Effect
32-33
Package Contents / Parts and Names
10-11
Protection Film on the Player
12
Spatializer Sound Effect / Equalizer
34-35
Touch Keypad
13
Volume Restriction/ Displaying Lyrics
36-37
Photo Library / Slideshow Settings
38-39
Converting Video Files
40-43
Play Video
44-45
LCD Display
14-16
2. Basic Operation
Connecting Music Card
17-19
Using for the First Time
20
Installation CD
21
Downloading from the PC
Saving Files & Disconnecting to Your PC
4
1 Getting Started
3. Quick Start
1. Getting Started
22-23
24
5
Table of Contents
Important Cautions
Voice Recorder
53
Play Recorded Files
54
E-book
55
4. Menu
Detailed Features by Menu
56-64
5. Guide to Firmware Upgrade
Upgrade Firmware
Sliding Touch Operation Errors
65-67
6. Additional Information
Format
Handling Instructions
6
68-70
71
Precautions for Using the Product
72
Trouble Shooting
73
Product Specifications
Reset Music Card
When it is dead caused by improper operation, you have to reset your
Music Card. Disconnect it to a USB cable or AC Adapter, press and hold
on the
key for more than 10sec until the screen display goes off.
Then you can restart it for proper function.
1 Getting Started
Turn On / Auto Power Off
To power on the player, make sure it has enough power, press the Power ON/OFF button.
Click it again to start play. When there is no button operation for about 3 minutes while the
player is stopped, it is automatically turned off. To power off the player, press and hold the
Power On/Off button until it finishes with shutting down procedure.
74
When the player is started up, system will check power level of touch
keypad first. Do not put your fingers on touch keypad during the system
checking, otherwise it will possibly cause checking error and losing
control. Please restart it for proper function.
Update Music Library
After finish copying the music, using Main Menu-Music-Update Music Library on the player
before your listening music so that you can organize and assort them by artist, album or
genre.
Initialize OS to the Original Factory Settings
When it is not able to turn on and disable connecting the player to your PC even after reset
it. Please click and hold
and the Power ON/OFF button after start it for about 8 sec. to
initialize the OS to the original factory settings. All data will be deleted in the player.
7
Product Features
Copyright Notice
This product is the registered trademark of Meizu Technology Co., Ltd.
Meizu Technology Co., Ltd, has the exclusive copyright for this User Manual.
It is prohibited to distribute this User Manual in part or in whole without permission.
Meizu Limited, Has the copyright for the product software.
It is prohibited to distribute or commercially use them without written
permission from Meizu Limited.
The various examples, drawings and pictures and included in this User Manual
are subject to change without prior notice when new product enhancements
become available.
Do not change or modify the product without permission or authority of manufacturer.
It may cause undesirable operations, permanent damages or harmful interferences.
Windows 2000, Windows XP and Windows Media Player are the registered
trademarks of Microsoft Corp.
Unique and Compact Design with High Portability
Super Slim Body, Only 7mm Thick. TFT-LCD1.5 Inch 176*132 (RGB)
Graphic and Dynamic GUI; Humanized Sliding-Touch Keypads
Professional Sound Effects, Various and Adjustable EQ modes
Including: User adjustable POP, Classical, Rock, Jazz, Live, Bass Booster, User.
Supports WMA, WMA VBR, WMA LOSSLESS, OGG, WAV, FLAC Playback
High Speed USB2.0 Ultra Fast Data Transfer
1 Getting Started
General
Copyrights/Trademarks
High Capacity USB Flash Storage for Removable Disk
Plays Up to 23 Hours (Based on our company's test)
Movie Player(AVI video files)
Real-time Clock Setting and Calendar
Photo Album + Slide Show: JPG, BMP, GIF Formats
Music library, playlist Setting, Easier and Faster to search music
Built-in Microphone Supports High Quality Recording
Synchronized Song Lyrics display and ID3 supported
Folder Managerment, Text reader (TXT)
Certifications
CE, FCC, CCC
Multiple Language Supported
Resume Function
Power saving function: Auto Power OFF and sleep timer
Hold key Function
Firmware upgradable
8
9
Package Contents
Parts and Names
1 Getting Started
1. Top
HOLD
Us er' s M anu
al
2. Front Side
User's Manual
Music Card Main Body
LCD Window
MENU
Earphones
USB Cable
Installation CD
Note: Design and specifications are subject to change without notice.
POWER/PLAY/STOP
PREVIOUS/Switching
/NEXT
3. Bottom Side
USB Port
10
Sliding-touch
Keypad
ENTER Tapping
Strap
MIC
Earphone
11
Protection Film on the Player
Touch Keypad
Touch Keypad
The surface of player is easy to be contacted with other objects during use. To protect
the player from scratches, the front and rear plate surfaces of the player are attached
the transparent protection films. The films are featuring high light transmittance, antireflection and abrasion-resistance. Please keep the film on the front panel of the player.
Touch keypad is an important part of the player, including sliding touch control and key
operations, which used for controlling operations of all kinds of functions of the player.
Sliding touch keypad:
The surfaces of the player are
attached with the protection films
before leaving factory.
Touch keypad
Lay your finger on one
end of keypad
1 Getting Started
Protection Film on the Front Panel
Sliding lightly on keypad
Clicking Key:
Key positions
Pls do not remove it!
12
Lay your finger on key
positions of keypad
Press lightly
1. While HOLD is locked, any operation will be invalid.
2. Too fast operation will be easy to cause error.
3. Click your finger on the button
or tap on the center keypad to apply the operation.
4. Clicking Menu key to go back to the previous menu interface or cancel an operation.
5. Using the button
to switch different songs from the beginning of the song lists to
the final more easily.
13
LCD Display
LCD Display
HOLD
5
Play Status
Track Number
Song Total
Elapsed Time
14
LCD Display
1 Getting Started
2. Video Playback
1. Play Music
Repeat Playback
6
Remaining Battery
Power
Radom Playback
Song info or lyrics
Playback Progress
/Status Bar
Remaining Playing
Time
In the playback mode, the playback progress bar shows the elapsed and
remaining time of current song. Slide your finger on touch keypad up and down
to adjust the volume.Click on the center keypad, the sliding bar will display a
diamond object in the bar. It shows the current playback position. Slide your
finger on touch keypad up and down to move playback position forward or
backward. Click it again, it shows the song's detailed information. Click the
key once again, it displays dynamic frequency spectrum (it does not support
FLAC/WMA LOSSLESS file). Click it, then return to normal playback mode.
Video Name
4
Play Status
Elapsed Time
Playback Progress
/Status Bar
Remaining
Playing Time
3. Photo View
Photo File Info
Current Number
Browsing Progress
/Status Bar
Total Numbers
15
LCD Display
Connecting Music Card
2
Connecting Music Card
Connecting to a Computer
HOLD
Connect the small end to player, large end to PC.
Record Status
File Content
Record File
Remaining Battery
Power
Channel
Click
USB Cable
Long Click
* Large End
Basic Operation
5. MIC Record
USB port on the player
RecordTime
Elapsed Time
Record Progress
/Status Bar
Total Available Time
USB port on the PC
* Small End
1. During Power Off
Installation CD
Connect it to the computer using the USB cable supplied in the package during the player
powered off. It will be charged using the power supply from the PC.
Connecting to a computer during it power off,
it will charge its built-in battery and appears as
the left figure.
16
17
Connecting Music Card
2. During Power On
Connect it to the computer using the USB cable supplied in the package during
the player powered on. It will charge its built-in battery and appears as the figure.
In the normal Windows environment, as soon as the
cable or simple USB jack is connected, the message
"Searching for new device" appears and USB driver is
installed automatically. For Windows 98SE, put the
included CD-ROM in your disk drive, then follow the
instructions on your PC screen to install the USB drive.
Note: While connecting to PC, tracks and operations cannot be applied. Pulling out the
PC connection cable from the player before your listening to music / viewing a picture
and so on.
Charging the Battery
This page was intentionnaly left blank
Using for the First Time
* Charging the Battery before using your player.
* While the player is connected to the computer via USB cable, it will charge its built-in
battery. The battery is fully charged in about 3 hours.
* Check if the player is connected to a high-power USB2.0 port. Some low-power USB
ports available in keyboards and other USB hubs may not provide enough power to
charge or sync the player.
* If the computer is in sleep mode, the player may not be charged.
18
The Remaining Battery Charge icon indicates the remaining time the battery can be
used. The more the battery is used, the fewer the number of segments in the icon.
19
Using for the First Time
Loading the Battery
If you grab the player as picture, it is
easier to handle them.
Using for the First Time
Pentium 133MHz or Higher
32MB Main Memory or Higher
40MB Hard Disk Space or More
CD-ROM Drive
USB Port (2.0)
Windows 98SE/ ME / 2000 / XP
Basic Operation
Handling
System Requirement
2
Using for the First Time
Installation CD
Install Software
3S the CD-ROM drive. The following screen appears
Insert the installation CD into
after inserting the CD.
20
+
The procedures of using for the first time
1. Insert the installation CD in your computer and install applicable softwares.
(Detail see to 21 Install CD.)
2. Click and turn on your player.
3. Connect the player to the computer using the USB cable supplied.
4. Open up the [Removable Disk](which represents the memory of this player)
on My Computer.
5. Transfer the desired files from PC into your player under their specified directories.
You can also create folder for your need, such as Ebook.
6. Safely disconnect the USB cable to the player.
(All keys of the player can not be operated during connecting to PC.)
7. Plug the earphone to the player. Press the Power ON/OFF and start to play.
8. You can now use the player to play music, video, view your favorite photographs
and a lot of the other features.
The installation CD contains the
following contents:
- Device Driver for Windows98
- Video Converter for MEIZU Music Card
Video Converting Tools
(Note: Window 98 driver is only required
for OS with win 98 or lower version.
If you are using Win2000 or above, you will not need to install driver. The PC
will automatically recognise the player when it is connected. The video
convert tool installation is required for video conversion. When installation is
automatically not started, execute the setup.exe in the installation CD, and
then the Manager program is automatically setup.
21
Downloading from the PC
Downloading from the PC
Select the desired music to download
to the player from the computer.
It appears on your PC as shown in the
figure as follows(while finish formatting).
Select [Edit] - [Paste].
Click the [Edit] - [Copy] Menu.
Basic Operation
Access from a CD or download music, video or picture files from internet and transfer to
your PC hard disk, then transfer them to your player's Removable Disk. Take example for
copying songs as below,
2
Music files can be transferred
the
using the
Downloading to
from
theplayer
PC
following steps.
After finishing copying, it appears the music files on the Removable Disk. Disconnect
the player to your PC, then you can start listening to the music.
Double click [My Computer], then [Removable Disk] again.
The player is shown as the
Removable Disk on your PC.
22
Note: you can also drag and drop the selected files
from your PC into the [Removable Disk] window.
When copy files, you should save the video and photo files to specified
directories of the player, video files into Video directory, photo files into
Pictures directory. Otherwise, they won't be identified by Music Card .
23
Saving Files & Disconnecting to Your PC
Saving Files and Disconnecting to your PC
4. It pops the message as above, then click it.
Click
Quick Start
1. With the USB cable, connect the USB ports of the player and your PC.
(It should not use a USB hub. It is assumed that you connect to the USB port on
the main board.)
2. Save the music files under the hard disk on your PC.
3. After saved the files, click the icon
on the screen of your PC.
1. Power On
Press the Power ON/OFF
button, the power comes on and
MEIZU logo appears.
3
sˇ¤
layerh
n
o
C
tu
iF
P
p
Using Buttons
Press the Power ON/OFF button again,
start to play. If it displays no file, pls run
Update Music Library (Detail see to 30
Update the Music Library.)
2. Power Off
5. It runs 'Safely Remove Hardware'.
6. Then draw out and disconnect the USB cable.
Long Click
To make sure to save the data on your player safely and fully, please follow
the above steps accordingly when you disconnect the player to the PC.
While disconnecting,,it appears the warning, click OK and finish it.
When you press and hold the power
ON/OFF button for about 3 seconds,
the power turns off. If the PC and the
player are connected via a USB cable,
you cannot turn the power off.
3. Playback & Stop
Click
24
Press ON/OFF briefly, start to play.
Press it again while in Play status,
the play stops.
25
Menu Controls
Using Buttons
5. To adjust the volume
Menu Controls
3
4. Hold
Click
Click
Locked
Unlock
By turning Hold ON, all the keys on the player will not function.
It is irrelevant while listening to music and video.
6. Reset
Long Click
Click
Long
Click the Menu key briefly
Click
to select previous / next music, long click
Provious or the Next operation
Sliding up and down on
the touch keypad
7. Menu
Click
If the player stops responding,
Press the Menu briefly
please reboot it: Long click
to Main Menu or move
the Power OFF button for over
to the upper folder
10 seconds to force shutdown,
8. Display off on LCD
then press it again to start the
Long click Menu key for
player.
this effect, click Menu key again to resume the display.
Tap
Tap on the center keypad briefly
Click
Click the Menu key to exit
Select the Menu Options
9. To select music
to switch the
10. Initializing the operating system in the player
Start the player, click and hold the key
for about 8 seconds, then it
initializes the OS to the original factory settings.
All data will be deleted, pls backup the datas before operating this.
26
Quick Start
in the music operation menu,
sliding your finger on the
touch keypad.
To increase volume
To decrease volume
Click the Menu key to go back to main menu, sliding the keypad up and down to select
the menu options. Click or tap on the center keypad, then enter the submenu (submenu
is available when there is ">" symbol on the right of menu item). Click the Menu key to the
upper menu (it will return to current playback interface, when you operate on top menu).
Adjust the Values
Enter the menu, sliding on the keypad up and down to adjust the values. Click or tap
on the center keypad and the options is applied. During the selection, click the Menu key
to exit.
27
Listening to Music
Using Browser
3
Listening to Music
Using Browser
Quick Start
Click
Click
Click the Menu key briefly
Sliding up and down on
the touch keypad
Click
Tap
Click
Sliding
Click
Tap on the center keypad briefly
Click the Menu key briefly
Open Browser
Click the Menu key, sliding the keypad up and down to select Browser option.
Tap on the center keypad to apply it.
Sliding on the keypad up and down to select the submenu options.
Click the Menu key and return to the upper menu or playback mode.
Play Music
28
There pops up the following functions after you select Music folder or a song,
1. Play 2. Add to My Playlist 3. Delete.
You can conveniently navigate through your music files and listen to them. Select Music
in the main menu. Slide up/down to browse for a song by Artist, Album, Genre, Rate and
Playlist. Select the desired song/playlist and click the center keypad to play. Click the
Previous/Next key to previous/next music, slide up and down on the keypad to adjust
the volume. You can conveniently transfer your favorite music to the player. It supports
following audio format: WMA (VBR): 8 Kbps ~ 355 Kbps
WAV: PCM, MS-ADPCM, IMA-ADPCM OGG: Q1 ~ Q10, and etc.
Note: 1. If the keys cannot function, please check if the HOLD is on.
2. Continuous playback time: About 23hrs (128kbps/volume 20/EQ normal/LCD off)
29
Sorting the Music Library
Update the Music Library
Sorting the Music Library
Selecting Modes
Tap
Tap on the center keypad briefly
Tap on the center keypad briefly
Click
Tap
Click
Tap on the center keypad briefly
Click the Menu key to exit
After finishing copying the music files, they will be updated automatically in the player.
1. Click the main Menu key and select Music mode.
2. Slide on the touch keypad up and down and select Update Music Library, tap on the
center kaypad,then select OK and the option is applied.
During the updating, it will take you a few seconds.
3. When finishes, it returns back the menu options automatically.
30
Quick Start
Tap
3
Update the Music Library
Tap
Tap on the center keypad briefly
Sliding up and down on
the touch keypad
All Songs To list all the songs on the player.
Playlist
a. Add to My Playlist. You can add the songs, Artists, Albums. When a song is selected,
press and hold the key ( )until the highlight bar starts to flicker, the song is added to
My Playlist. Select an artist or a album, press and hold the key until the highlight bar
starts to flicker, the related songs are added to My Playlist. When the highlight bar stops
flickering, the selected song is added.
b. Save Playlist. After finishing adding the songs, select My Playlist - Save Playlist and
tap on the center keypad to apply it. Folder names are created automatically as
PLAYLIST1, PLAYLIST2...
c. Clear ( Delete ) Playlist. Select the memoried playlists (for example, PLAYLIST1), then
select Delete Playlist, tap on the center keypad and delete it.
Artists Assorting by all artists and unknown artists.
Albums Assorting by all albums and unknown albums.
Song Order ( assort All Songs only). You can assort the songs by Title, File name, Artist
and Album. During Main Menu - Music - All Songs/Playlists/Artists/Albums, press the
Power ON/OFF button, it will start to play the songs on the current item.
31
Sound Effect
Playback Mode
Quick Start
Tap
Tap
Tap on the center keypad briefly
3
Sound Effect
Playback Mode
Sliding up and down on
the touch keypad
Tap on the center keypad briefly
Sliding up and down on
the touch keypad
Tap
Tap
Tap on the center keypad briefly
Random playback
This sets whether or not to play randomly. Tap on the centre keypad and select On, the
next playlist is played randomly.
Repeat playback
Click the Repeat option in the controls window, then tap on the centre keypad and
select On, the next playlist is played repeatedly.
32
Tap on the center keypad briefly
This is the feature to set the Sound Effect. There are the following sound field effects:
A. EQ: Pop, Classical, Rock, Jazz, Live, Bass Booster, User-defined and Load Default.
It provides you to adjust the values of EQ by yourself.
B. Bass Boost You can choose the value from 0~15 to set the bass effect.
C. Treble Boost You can choose the value from 0~3 to set the treble effect.
D. Spatializer You can shoose: Spatializer, Spatializer Mode, Virtual3D, Phase
Corrected Equalizer, Virual Bass Enhancement, Speaker Type.
E. Volume restriction There are level 5~ 35 optional.
33
Equalizer
Spatializer Sound Effect
Tap on the center keypad briefly
Quick Start
Tap
3
Equalizer
Spatializer Sound Effect
Tap
Sliding up and down on
the touch keypad
Tap on the center keypad briefly
Sliding up and down on
the touch keypad
Tap
Click
Tap on the center keypad briefly
Click the button briefly
To select Spatializer sound effect
34
1. During Main Menu mode, Select Sound Effect and click the center keypad.
2. Using your figure and sliding on the keypad up and down, select Spatializer effect.
Click the center keypad and apply it. You can choose the following options,
A. Spatializer To set Close or Open Spatializer sound effect
B. Spatializer Mode To set Spatializer mode: Normal, Virtual 3D, Natural Head Phone.
C. Virtual 3D To set values of Virtual 3D, you can adjust it from 0~9.
D. Phase Corrected Equalizer To adjust sound effect from value 0~9.
E. Virual Bass Enhancement To adjust sound effect from value 0~9.
F. Speaker Type To provide Hearphone and Speaker options.
(The player does not have a built-in speaker)
Sliding up and down on
the touch keypad
Select EQ
The player offers various EQ:
Pop, Classical, Rock, Jazz, Live, Bass Booster, User
User EQ
You can adjust the User EQ. Click the
button and enter the option, then tap on the
touch keypad to select the EQ. Function up and down on the keypad to select the value
and apply it. Tap it again and move to different option items.
35
Displaying Lyric
Volume Restriction
Synchronized song Lyrics
Tap on the center keypad briefly
Sliding up and down on
the touch keypad
Quick Start
Tap
Displaying Lyric
1. Download the lyrics from the internet to your PC. The lyrics file is the format
of .Irc.
2. Connect the player and your PC via USB cable.
3. Copy and drag the music audio lyric files on your player. (The lyrics file and music file
must be stored in the same folder, their filenames must also be the same.)
For example, for song named my angel.wma, the matching lyrics file will be my angel.lrc.
4. Disconnect the player and your PC.
5. Turn on the player, click left/right key to select the favorite song and play it.
3
Volume Restriction
Copy the lyric files from your PC to the Player.
Tap
Tap on the center keypad briefly
insatiable.lrc
Insatiable.lrc
To Set the Volume restriction
1. During the Main Menu mode, select Sound Effect and tap on the center keypad.
2. Using your figure and sliding on the keypad up and down, select Volume Restriction.
3. Click the button, slide it up and down to adjust and apply the setting.
You can choose it from 5 ~ 35 level.
36
Click
Click
It will display three lines of lyrics on the screen during playing, the current line will be
highlighted in different colour according to the font color.
37
Slideshow Settings
Photo Library
Photo Library
Tap
Tap on the center keypad briefly
Tap on the center keypad briefly
Tap
Sliding up and down on
the touch keypad
Tap on the center
keypad briefly
Photo Library
Searching for a picture
Function up/down to select previous/next image. Tap on the center keypad to display
the selected image in full screen.
Viewing a picture
38
Slide on the touch keypad up and down to view previous/next image. Tap on the center
keypad, you can select and set the selected picture as Music background, Radio
background or Record background. Click the Menu key to exit.
It supports JPEG, BMP, GIF formats.
Tap
Tap on the center keypad briefly
Tap
Quick Start
Tap
3
Slideshow Settings
Tap on the center keypad briefly
Tap
Tap on the center keypad briefly
Click Slide Show Settings to open following sub menu:
A. Time per Slide (Image Delay)
Selects the time each picture is displayed on the screen during a slide show.
B. Repeat: Displays each picture repeatedly.
C. Shuffle Photos: Displays each picture randomly.
D. Auto Rotate: Rotate it automatically to fit for screen display according to the size of
a picture in the player.
E. Transitions (Slide Effect)
Enables/disables overlap effects between each image during a slide show. You can
choose: Random, Push Across, Push Down, Wipe Across, Wipe Down, Wipe from Center.
39
Converting Video Files
Converting Video Files
2. Using Video Converter
The player supports .avi format.
However, as the resolution and code vary, some .avi will not be properly displayed on the
player. Therefore it is strongly recommened that user convert every video files before
saving to the player.
Install the converter tool enclosed in the CD disk.
Use the program to convert your .avi and other formats of video files.
After the conversion, you can save the file into the video diretory in your player disk.
When the installation finishes, Start -> Programs -> Video Converter -> Video Converter
is registered.
3
Converting Video Files
When the program starts, click Input
[Add] button and choose the
file to convert.
Select the converting video file from
the pop-up window, click [Open].
It appears the file name and
informations on the File List.
Quick Start
Click [Start]--[Programs]-[Video Converter]--[Video Converter
(For Card)].
1. Installing Video Converter
Insert the Installation CD in the CD-ROM
driver. Click [Video Converter Software]
to start the installation on the displayed
window.
The Installation program starts automatically. When it finishes, click
Finish and exit.
It will take you some time to finish the installation. It may pop up the warning window of
installing related plugin, it possibly indicates file is existing depending on the status of
the Windows. Then select "Retry" or "Ignore" to continue installation.
40
41
Converting Video Files
Converting Video Files
It appears a Pop-up window, click OK
and save it.
7
Click [Setting] and specify the
preferences.
8
After click it, it appears the settings.
Then click [OK] button and apply it.
The caption file is the format of .srt as suffix. You may ignore Step 6 to Step 9 during
your converting files without caption.
42
6
6
11
Click [Styles[, you can set the styles,
click [OK] and apply it.
After finishing converting, click the
[Close] button and finish it.
10
It will take you some time to convert
the file. During this process, only the
[Stop] button is valid for you.
Quick Start
Click Output [Browse] and specify the
path and file name.
3
5
Note:
1. The converted size is 176*132, the
converting time is depended on the size of
the original file. The quality is related to
your setting values.
2. The BitRate of Video is 200~500, Frame
is 15~20.
3. The subtitle file and video file should
be saved under the same content.
I.e. If a video file named Video.avi, then
the subtitle should be Video.srt.
4. They can be converted that the files are in
.srt, .smi, .sub, .ssa formats without subtitles.
43
Play Video
3
Play Video
Tap on the center keypad briefly
Quick Start
Tap
Tap
Tap on the center keypad briefly
Tap
This page was intentionnaly left blank
Tap on the center keypad briefly
1. Function up and down to select the video to play.
2. Tap on the center keypad to start playback.
3. During playback, sliding on the touch keypad up and down to increase/descrease
the volume.
4. Click the key ( ) to pause the video playback.
5. Click the Menu key to exit.
44
Note:
Continuous playback time:
About 4 hours (176*[email protected], Video: 384kbps, Audio: 128kbps / 44kHz)
45
3
Quick Start
This page was intentionnaly left blank
46
This page was intentionnaly left blank
47
3
Quick Start
This page was intentionnaly left blank
48
This page was intentionnaly left blank
49
3
Quick Start
This page was intentionnaly left blank
50
This page was intentionnaly left blank
51
Voice Recorder
3
MIC Recording
Quick Start
Tap
Tap on the center keypad briefly
Tap
This page was intentionnaly left blank
Click
Tap on the center keypad briefly
1. Select Record in the main menu. Click the key
and enter.
2. Select Start Voice Record option and tap on the keypad to apply it.
3. Click the key (
), then start voice recording.
4. Click it again to pause, click the Menu key to stop.
52
Note: 1) Please make sure the battery volume is enough during Voice Recording.
2) If it displays "The Memory is Full!" on the LCD, to record, delete files and/or folders
on the player in order to make some space available. 3) The recording file will be
memorized and saved to RECORD\ directory, filenames are created automatically
beginning with "VOC" according to recording time.
53
E-book
Play Recorded Files
3
View E-book (Text file: .txt)
Play Recorded Files
Quick Start
Tap
Tap
Tap
Tap on the center keypad briefly
Tap on the center keypad briefly
Tap on the center keypad briefly
Tap
SO
LGH RQ the tRXFK
keypad up and down.
Click
Tap
Tap on the center keypad briefly
Sliding up and down on
the touch keypad
Tap on the center keypad briefly
1. When finishes recording, select Record Filelists, tap on the touch keypad.
2. Slide up and down on the keypad, you can select and play the recorded files.
3. Tap on the touch keypad to start playback.
54
1. Save the .txt file in your PC. You can download it fom internet or create your own by using
the Notepad program (standar program come with windows). Simply cut and paste your
favourite part of text onto a blank notepad document and save it as .txt file.
2. Connect the player and your PC with the provided USB cable.
2. Save the selected text file into your player from PC. You might also create a new directory in
your player disk, namely EBOOK. Then save the text file into that folder.
3. Disconnect the player and your PC. Turn on the player, select Browser option.
4. Tap on the keypad , you can view the selected text file on your player. (If you save it under
a new directory, go into that folder)
5. Slide on the keypad up and down, you can move the text file page by page.
6. Click the center keypad, it pops up the window, you can select:
A. BookMark ( Bookmark 1, Bookmark 2, Bookmark 3, Jump to Bookmark 1, Jump to
Bookmark 2, Jump to Bookmark 3 )
B. Automatic (Close, 10 Second, 15 Second, 20 Second, 25 Second, 35 Second ).
C.Scrolling Speed (1 Line, 2 Lines, 5 Lines, 7 Lines ).
7. Click the Menu key to exit.
55
Detailed Features by Menu
Settings
4
3. Main Menu
This function is to list the related items in Main Menu when
they're set as Open status.
! Select Settings, Click the center keypad.
! Slide up and down on the keypad and select Main Menu,
click it.
! Slide up and down on the keypad, you can find the options,
tap on the keypad to apply ON/OFF option.
Memory
! Information on the flash memory in the Player is displayed.
! You can check usage and remaining memory size.
! Some of the flash memory in the Player is used for system area. Therefore, when we
exclude the system area essential for normal operation of the Player, the actual capacity
of the flash memory is somewhat reduced.
! For example, with a 256MB product, about 243MB of memory capacity is normal.
Free Space
Model Number
Operating System version
2. Important Tips
This is to provide the reminding information and operating
procedures on the player.
! Select Settings, tap on the center keypad and apply it.
! Slide up and down on the kaybad, select Important Tips and
tap on the keypad, then you will find the tips.
Menu
1. About
56
Detailed Features by Menu
Music
All Songs, Playlists, Artists, Albums, Song order, Random,
Repeat, Sound Effects, Bass Boost, Treble boost, EQ
Photos
Record
Record Files Lists, Start Voice Record
Now Playing
Calendar
Backlight Timer
57
Detailed Features by Menu
Detailed Features by Menu
! This is the feature to adjust the blend of background
photo.
! Select Background Blend and click the center keypad.
! Using your finger by sliding on the keypad, select from
0 to 20 and apply the value.
1.˛
§ĹηĄ
¶·
! This menu is for setting the time for which the backlight is turned on.
! Select Backlight Timer and click the center keypad.
! Using your finger by sliding on the keypad, select from: 2sec., 5sec., 10sec., 15sec., 20 sec.,
' Always On'.
Note: the player backlight goes off automatically in a few seconds for the foctory setting when
the player is not in operating mode. Click on the key to resume the backlight.
Menu
A. Backlight Timer
4
C. Background Blend
4.Display
D. Fonts Color
! This is the feature to select a color for menu fonts.
! Select Fonts Color and click the center keypad.
! Using your finger by sliding on the keypad to select
different colors.
! Tap on the touch keypad and apply the selection.
! Click the Menu key to exit.
B. Backlight Brightness
! This is the feature to adjust the brightness of the LCD
display.
! Select Backlight Brightness and click the center keypad.
! Using your finger by sliding on the keypad, select from 0
to 100 and apply the value.
! Tap on the touch keypad and move to another option.
! Click the Menu key to exit.
58
E. Menu Bar Color
! This is to set the colors of selecting bar.
! You can choose: white, red, dark red, green, dark green,
blue, dark blue, teal, dark teal, purple, dark purple, yellow,
dark yellow, light gray, black.
! Slide and select your desired color.
! Tap on the touch keypad to apply it.
59
Detailed Features by Menu
Detailed Features by Menu
4
F. Use Default Background
! This is the feature to set the date and time.
! Select Set Date and Time option, and click the center keypad.
! Using your finger by sliding on the keypad, select to set the related
value.
! Click the Previous/Next keys to select the options.
! Tap on the touch keypad to apply and move to the upper menu.
! Click the Menu key to ignore it, then return back.
B. Time Format
5. Button Sound Check
The player provides two formats to display the time.
! Select Time Format option.
! Tap on the touch keypad to select 12 Hours or
24 Hours and apply it.
! Click the Menu key to exit.
This function is to set button sound as open or close
during operation.
! Select Button Sound Check.
! Tap on the touch keypad to select On/Off option and
apply it.
6. Date and Time
A. Set Date and Time
60
Menu
! Initialize the background to the original factory settings.
! Select Use Default Background and click the center
keypad, it pops up the window.
! Slide and select 'Yes' or 'Cancel'.
! Tap on the touch keypad to apply it.
C. Title Time
This is the feature to display the time on the menu title.
! Select Title Time.
! Tap on the touch keypad to select On or Off option
and apply it.
61
Detailed Features by Menu
Detailed Features by Menu
• MSC Mode
Select the MSC mode, connect Music Card to your PC. It will appear "Removable Disk"
on your PC. Double click it, you may use the player to copy, delete and etc. After
operation, click and run "Savely Remove Hardware", then disconnect it.
• MTP Mode
Media Transfer Protocol (MTP) is a protocol designed for portable media devices and
it has been developed by Microsoft based on Windows Media Player 10 (WMP10).
It facilitates communication between devices that support WMP 10.
With this protocol, it accesses the complete connecting for your Music Card to
Windows XP. Also, you may manage and transfer all datas through WMP 10.
8. Sleep Timer
! The player can be set to automatically turn off after a
preset time while it is playing.
! You can choose: Off, 30 Minutes, 1 Hour, 1.5 Hours,
2 Hours, 3 Hours.
! Select Sleep Timer and tap on the touch keypad. Then
choose a value by sliding your figure on the keypad.
• Use Windows Media Player 10 to manage media datas
1
É
2
6
9. USB Mode
3
1 Search Frame
2 Library
3 Playing List
4 Detail Information
5 Content
6 Sync
! This is the feature to set the MSC/ MTP mode.
! Select Settings and click the Enter key.
! Slide and select USB Mode, MSC and MTP
optional.
62
Menu
! This is the feature to change the menu language.
You can choose: English, French, Spanish, Italian, Dutch,
German, Portuguese and Danish.
! When you select and tap on the touch keypad, the
selection is applied, it returns back the upper menu.
4
7. Language (Menu Language)
5
4
Windows Media Player 10 Interface
63
Upgrading Product Firmware
Detailed Features by Menu
5
The latest software
Guide to Firmware Upgrade
ˇń What is Firmware of the Player?
Firmware of the player is a program embedded in the hardware, which activates various features.
By upgrading, you can enhance the features and eliminate the bugs.
﹞Transfer songs to Music Card with WMP 10
ˇń
10. Reset All Settings
Conditions for Upgrading Firmware
1/ Upgrading the firmware requires the basic environment where the UMS feature of the
ˇń
Windows OS works properly.
2/ You can check the player in 'My Computer' on Windows 98/ME/XP/2000/2003.
3/ 'Removable Disk' (which represented your player memory) must be displayed for an upgrade
purpose. If it is not displayed, we recommend that you check the menu that asks whether or not
to use a USB Device from the main board CMOS, or reinstall Windows, or have the USB port on
the main board examined.
﹞Initialize all the settings to the original factory settings.
﹞Select Reset All Settings and click the Enter key, it pops
up the window.
64
Notice for Legal Limitations and Responsibilities Regarding Firmware
1/ The performance and menu of Player may change without prior notice through upgrading
firmware of regular or beta versions supported by the manufacturer.
2/ We recommend that users should personally back up important files and data saved in the
player to their PC before upgrading firmware.
3/ All upgrades are intended for overall enhancement of performance. The upgrades will be
provided when available based on our company's judgment.
4/ Some beta versions of the firmware may have minor bugs that will be corrected in the official
versions of the firmware. This should be noted by the users before an action.
Set MTP to USB mode, connect Music Card to your PC. It appears "MTP Media Player"
on the Taskbar, select 'Using Windows Media Player' on the pop-up window. Then select
'Automatic' and follow the steps to start Sync. It appears 'Synchronization is complete'
after finishing it.
Note: There are two methods for you to transfer songs to the player: Automatic and Manual.
During MTP mode, you also can transfer the songs and files directly. Click My Computer,
then double click Music Card, you will find Data and Media folders. Put the desired songs to
Media folder, and other files to Data. ( Pictures should be put to the foler Data - PICTURES,
Video files to Data-VIDEO)
﹞Slide and select 'Yes' or 'Cancel', when you select 'Yes',
all the settings will be initialized to the original factory ones.
Guide to Firmware Upgrade
Use WMP to play songs, it will add the songs to Library automatically.
You may also drag the media files on your PC to Library. It will automatically classify the
songs according to the Artists, Albums after adding.
1. Add to Library: Click 'Add to Library' on the bottom left corner of the windows, you also
can click the file to add it. 2. Classify files (Detail see to instruction of Media Player.)
a. On the Content section, click the desired folder.
b. On the Detail Information section, click the options (Title, Artist, Album, Rating, Genre
or Leighth, etc.), It will be sorted ascendingly and in alphabetically.
c. Click the options again, it will be sorted descendingly.
65
Upgrading Product Firmware
Upgrading Product Firmware
5
Downloading and Installing Software
Decompress the downloaded files,
drag and drop them onto the
"RemovableDisk" window.
Then it displays M3.EBN, resource.bin
in the Removable Disk.
Then run 'Safely Remove Hardware'
and disconnect the player to your PC.
The upgrading is applied, then disconnect the USB cable on the player.
After finish upgrading, restart the
player, then it pops up and starts
running the 'Upgrading Software,
Please Wait...' and shut down automatically. Turn it on again, it pops up
'Upgrading Resource, Please Wait...',
then the program will be renovated
automatically on the player. It will take
you some time to finish the upgrading.
Connecting the player and your PC
with the provided USB cable.
Turn on the player.
Click
Click the Power ON/OFF button to turn
the player on.
The player is shown as the Mobile
Disk on your PC.
Download the software package from
website.
Guide to Firmware Upgrade
When there is a new firmware released, you can download the latest firmware from
www.danedigital.com website free of charge to enhance the features and eliminate the bugs.
In order to upgrade the firmware of the player, you need the program and the related drive,
which are provided in the package. Please refer to the following procedure.
Software.zip
Draw out the USB cable on the player.
Software Package
66
In the normal Windows environment, as soon
as the cable is connected, the message
"Searching for new device" appears.
Please take attention to the model
number and software version.
67
Format
Format
6
Formatting the Flash Memory
Double click [My Computer] and select the [Removable Disk].
Before formatting
Finished installation of the player manager program
Connecting the player to your PC
Backup all data stored in the player
The player is shown as the Removable
Disk on your computer.
Operating procedures
Press the Power ON/OFF button
to start the player.
Connect the player and your PC via
USB connection cable.
Select the [Removable Disk] and right
click on it, then click [Format].
Additional Information
The flash Memory of the player can be formatted. Please use Windows format tools
to format the player, and restore read & write operations of file systems.
If the flash Memory is formatted, all data stored within is lost.
Take notice of this fact, examine the following procedures.
Click the [Start] key.
Click
* Small end to player, large end to PC
68
69
Handling Instructions
Format
The formatting is start running.
Be careful when storing the set and do not use or place it at the following places:
ˇń Places with high humidity;
ˇń Places with strong magnetic fields;
ˇń Places with extreme temperatures;
Directly under the sunshine or near the equipment that generates heat;
ˇń
Inside a car with closed windows especially in summer.
ˇń
6
While finishing, click [OK] to finish.
Exit the formatting, click [Close] to exit.
Additional Information
Do not subject the player to severe impact or jarring.
Vibration experienced during walking or exercising will not affect the player. However,
dropping a heavy object on the player may result in damage or sound distortion.
6
It pops up the warning window, select
[OK] to continue.
It is necessary to prevent strong shock when reading files or operating, otherwise
files may be damaged or deleted.
Please do not repair or disassemble this product by yourself.
Please do not use this product in the place where forbid to use for electronics
products.
Please do not operate this product while driving.
70
You should take special care when you format it since all the data in the memory will be
deleted. The folders named Video, Pictures, Record, Music, Playlists in the player are
system directories, they will be deleted after format. Reboot and operate the player,
then the directories will be recreated automatically.
Please backup the important information on your note book, any repair result from
71
electricity shock, static electricity, change of battery or incorrect using may cause
change, damage or delete the files stored in the product.
71
Trouble Shooting
Precautions for Using the Product
Keep away from places of
dust and cigarette ash.
Trouble Shooting
ˇń
The player does not
power on.
ˇń
ˇń
ˇń
There is no sound.
Make sure that the player does
not get in contact with
chemicals such as benzene
or thinner.
Frequently back up important
files. All the data stored in the
product may be deleted during
AS.
If you disassemble or modify
the product arbitrarily, you
cannot receive free services,
and may be excluded from the
scope of service.
Please keep the SN of your
player for your future's
reference.
Please keep the highperformance transparent
protection film on the player
and do not remove it.
ˇń
ˇń
Check that there are audio files in the memory.
Check whether VOLUME is set to "0".
Connect the earphones/remote plug firmly.
Corrupted WMA audio files may make a static noise & the sound
may cut off.
Check your files on the PC to see if they are corrupted.
ˇń
Check out Menu - Display - Language and confirm whether
the right language has been selected.
ˇń
Check the connection between your computer and the player
to ensure that the cable is secure.
Check the Manager program to make sure it is operating.
Check whether the player 's Memory is full.
Characters in LCD are
broken.
Failed download of
music audio file
Keep away from impact, do
not contact with the static
objects.
ˇń
Check whether the HOLD switch on the player is ON
(Switch to OFF position)
Check whether it failed upgrading the software, upgrade it
again.
ˇń
ˇń
Additional Information
Do not drop player or apply
impact. Shock is the major
cause of breakdown.
6
Do not keep it in high
temperatures or in a damp
place for a long time or
dispose in direct sunlight.
ˇń
ˇń
ˇń
SN
72
Note: Should any problem persist after you have checked these symptoms, consult the
distributors.
73
Product Specifications
Audio Playback
Picture Format
Video Playback
Record
74
81mmx39mmx7mm (HxWxT)
42g (Including Battery)
TFT LCD 1.5" 176x132 RGB, 100 levels brightness adjustable
High speed USB2.0
Built-in basic Flash Memory (2GB/4GB/8GB)
Built-in 3.7V, 460mAh Rechargeable Li-ion battery
FLAC, WMA Lossless VBR
5~192kbps
WMA
Quality0 ~ Quality10
OGG
PCM, MS-ADPCM, IMA-ADPCM
WAV
Frequency Response 20Hz ~ 20kHz
S/N Ratio
>85dB
Distortion Rate
<0.3%
Earphone's Output
350mV @ 32
BMP, JPG, GIF
1024x1024
AVI
Video: 25 fps, 384/512kbps
Audio: 128~256kbps, stereo
Recording Format
Bit Rate: 32kbps ~ 128kbps
Recording Source
Mic
Note: Design and specifications are subject to change without notice.
Additional Information
Dimensions
Weight
LCD
PC Interface
Flash Memory
Power Supply
6
Product Specifications
Memo
75
6
Additional Information
77
76
Memo
Memo
Memo
(Mz-02)
78
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement