U-Line U-CLR1215RSOD-40A User manual

U-Line U-CLR1215RSOD-40A User manual
QUICK START GUIDE
1000 Series
•
CLR1215
•
115 V / 60 Hz
QUICK START GUIDE
u-line.com
WELCOME TO U-LINE
Congratulations on your U-Line purchase. Your product comes from a company with over five decades and three generations
of premium modular ice making, refrigeration, and wine preservation experience. U-Line continues to be the American
leader, delivering versatility and flexibility for multiple applications including residential, light commercial, outdoor and marine
use. U-Line’s complete product collection includes modular Wine Captain® Models, Beverage Centers, Clear Ice Machines,
Crescent Ice Makers, Glass & Solid Door Refrigerators, Refrigerator Drawers, Freezers, and Combo® Models.
U-Line has captivated those with an appreciation for the finer things with exceptional functionality, style, inspired innovations
and attention to even the smallest details. We are known and respected for our unwavering dedication to product design,
quality and selection. U-Line is headquartered in Milwaukee, Wisconsin with a west coast office located in Laguna Beach,
California and European support in Dublin, Ireland. U-Line has shipped product to five continents for over two decades and is
proud to have the opportunity to ship to you.
PRODUCT INFORMATION
Looking for additional information on your product? User Guides, Quick Reference Guides, CAD Drawings, Integrated Panel
Instructions, Compliance Documentation and Product Warranty information are all available for reference and download at
u-line.com under Documentation.
PROPERTY DAMAGE / INJURY CONCERNS
In the unlikely event property damage or personal injury is suspected related to a U-Line product, please take the following
steps:
1. U-Line Customer Care must be contacted immediately at +1.800.779.2547.
2. Service or repairs performed on the unit without prior written approval from U-Line is not permitted. If the unit has been
altered or repaired in the field without prior written approval from U-Line, claims will not be eligible.
SERVICE INFORMATION
Answers to Customer Frequently Asked Questions are available at u-line.com under Customer Care or you may contact our
Customer Care group directly, contact information below.
GENERAL INQUIRIES
SERVICE & PARTS ASSISTANCE
U-Line Corporation
Monday - Friday 8:00 am to 5:30 pm CST
8900 N. 55th Street
T: +1.800.779.2547
Milwaukee, Wisconsin 53223 USA
F: +1.414.354.5696
Monday - Friday 8:00 am to 4:30 pm CST
Service Email: [email protected]
T: +1.414.354.0300
Parts Email: [email protected]
F: +1.414.354.7905
Email: [email protected]
u-line.com
CONNECT WITH US
Designed, engineered and assembled in WI, USA
QUICK START GUIDE
Contents
1
Model List
2
Safety and Warning
2
Environmental Requirements
3
Water Hookup
5
Drain
7
Door Swing
8
General Installation
9
Control Operation
9
First Use
9
Ice
10
Sabbath Mode
11
Warranty
u-line.com
QUICK START GUIDE
u-line.com
Model List
This guide provides the basics to get you started. Looking for more information? Visit u-line.com to view detailed User Guides
for all U-Line products.
Clear Ice
U-CLR1215S-00A
U-CLR1215S-40A
U-CLR1215INT-00A
U-CLR1215INT-40A
U-CLR1215B-00A
U-CLR1215B-40A
U-CLR1215W-00A
U-CLR1215W-40A
Outdoor Series
U-CLR1215RSOD-00A
U-CLR1215RSOD-40A
Visit http://www.u-line.com/product-literature/userguides or
scan this QR code to view all user guides online.
1
QUICK START GUIDE
u-line.com
Safety and Warning
Environmental Requirements
NOTICE
This unit is designed to operate between 50°F (10°C) and
100°F (38°C). Higher ambient temperatures may reduce
PLEASE READ all instructions before installing,
the unit’s ability to reach low temperatures and/or reduce
operating, or servicing the appliance.
ice production on applicable models.
Use this appliance for its intended purpose only and follow
For best performance, keep the unit out of direct sunlight
these general precautions with those listed throughout this
and away from heat generating equipment.
guide:
In climates where high humidity and dew points are
SAFETY ALERT DEFINITIONS
present, condensation may appear on outside surfaces.
Throughout this guide are safety items labeled with a
This is considered normal. The condensation will
Danger, Warning or Caution based on the risk type:
evaporate when the humidity drops.
! DANGER
! CAUTION
Danger means that failure to follow this safety
Damages caused by ambient temperatures of
statement will result in severe personal injury or
40°F (5°C) or below are not covered by the
death.
warranty.
! WARNING
Warning means that failure to follow this safety
statement could result in serious personal injury
or death.
! CAUTION
Caution means that failure to follow this safety
statement may result in minor or moderate
personal injury, property or equipment damage.
2
QUICK START GUIDE
u-line.com
Water Hookup
Do not use Teflon tape or joint compound on the
INDOOR MODELS
adequate seal. Other materials could cause
PREPARE PLUMBING
blockage of the valve.
water fitting. The rubber washer provides an
Please use the braided stainless steel water supply line
which comes attached. The water line is fitted with a
Failure to follow recommendations and
standard 1/4" (6.35 mm) compression fitting.
instructions may result in damage and/or harm,
flooding or void the product warranty.
! WARNING
! CAUTION
Prior to installation, determine if this product
contains a gravity style drain or factory installed
Turn off water supply and disconnect electrical
drain pump. Products without a drain pump may
supply to unit prior to installation.
only use a gravity style drain. Failure to connect
water supply or drain line connections properly
1. Turn off water supply and disconnect electrical supply
may result in water leakage, personal injury,
to product prior to attempting installation.
and/or property damage. Disconnect power and
turn off water to the unit before attempting to
alter these connections. These connections are
2. Locate the desired cold water supply location.
the responsibility of the owner and must be
connected per local plumbing code. If you are
3. Locate braided stainless steel
uncertain of how to safely and properly install
water supply line and
this product, contact a licensed plumber.
connect to your cold water
supply. The water line should
Water Supply Connection
be looped into 2 coils. This
will allow the unit to be
! CAUTION
removed for cleaning and
servicing. However, make
Review, obey, and understand the local
certain that the tubing is not pinched or damaged
plumbing codes before you install your unit.
during installation.
Connect to the cold water supply. The water
pressure should be between 20 and 120 psi. The
4. Turn on water and check for leaks.
water line MUST have a shut-off valve on the
supply line.
! CAUTION
Do not use any plastic water supply line. The line
is under pressure at all times. Plastic may crack
or rupture with age and cause damage to your
home.
3
QUICK START GUIDE
u-line.com
Water Supply Connection
5. Route water supply line in cable clamp and secure with
screw.
! CAUTION
Review, obey, and understand the local
plumbing codes before you install your unit.
Connect to the cold water supply. The water
pressure should be between 20 and 120 psi. The
water line MUST have a shut-off valve on the
supply line.
! CAUTION
Do not use any plastic water supply line. The line
is under pressure at all times. Plastic may crack
or rupture with age and cause damage to your
home.
Do not use Teflon tape or joint compound on the
OUTDOOR MODELS
water fitting. The rubber washer provides an
PREPARE PLUMBING
adequate seal. Other materials could cause
The water valve in this unit uses a standard 1/4"
blockage of the valve.
(6.35 mm) compression fitting.
Failure to follow recommendations and
instructions may result in damage and/or harm,
! WARNING
flooding or void the product warranty.
Prior to installation, determine if this product
contains a gravity style drain or factory installed
! CAUTION
drain pump. Products without a drain pump may
only use a gravity style drain. Failure to connect
Turn off water supply and disconnect electrical
water supply or drain line connections properly
supply to unit prior to installation.
may result in water leakage, personal injury,
and/or property damage. Disconnect power and
turn off water to the unit before attempting to
Use caution when handling back panel. The
alter these connections. These connections are
edges could be sharp.
the responsibility of the owner and must be
connected per local plumbing code. If you are
1. Turn off water supply and disconnect electrical supply
uncertain of how to safely and properly install
to product prior to attempting installation.
this product, contact a licensed plumber.
2. Remove the grille/access panel in the front and the
back panel.
4
QUICK START GUIDE
u-line.com
8. Install retaining clip.
3. Locate water
valve in the front
of the unit and
thread water
supply line
through.
NOTICE
Route the water
supply line
through the unit
so it does not come into contact with any
internal components other than the solenoid
valve. Normal operation creates some vibration.
A water supply line contacting an internal
component or cabinet wall can cause excessive
noise during operation or damage to the line.
4. On the back panel,
Drain
break away filler feature
in bushing, with flat
Models ending in (-00A, -01A) will not be equipped with
screwdriver.
factory installed drain pump.
Models ending in (-40A, -41A) will have the factory
Remove
ZLWKɠDW
screwdriver
installed drain pump.
5. Thread water line
DRAIN CONNECTION
through back panel hole
(with bushing).
! CAUTION
If your U-Line unit did not come with a factory
installed drain pump you must use a gravity
style drain connection. For assistance in
determining if your unit has a pump please
contact U-Line. The floor drain must be large
6. Turn on water supply and check for leaks.
enough to accommodate drainage from all
attached drains. Follow these guidelines when
7. Reinstall back panel and grille/front access panel.
installing drain lines to prevent water from
flowing back into the ice maker storage bin and/
or potentially flowing onto the floor, which may
result in personal injury or property damage.
5
QUICK START GUIDE
u-line.com
NOTICE
! CAUTION
Drain can NOT be located directly below the unit.
Unit has a solid base that will not allow the unit
Failure to connect water supply or drain line
to drain below itself.
connections properly can result in personal
injury and property damage. Gravity drain
There is a possibility that hose connections may
connections must be routed downward from the
have loosened during shipment.
rest of the unit at the rate of 1/4" per foot (1 cm
per 50 cm).
Verify all connections and fittings are free from
leaks.
FACTORY INSTALLED DRAIN PUMP
If your drain line will run up to a stand pipe, disposal or
spigot assembly, or does not otherwise meet the
GRAVITY DRAIN
requirements for a gravity drain, you may have ordered a
pre-installed U-Line P60 drain pump.
Normal
Proper Drain
See below for typical installations requiring a drain pump.
With Trap
Poor Drainage, Water Will Back Up
Stand Pipe
P60 Pump Required
With Trap and Vent
Proper Drain
Waste
6KXW2ɞ
Valve
A gravity drain may be used if:
Drain line has at least a 1" drop per 48" (approximately
Hot
Water
2 cm drop per 100 cm) of run.
Drain line does not create traps and is vented per local
Waste
code.
1. Cut the pre-installed drain tube to length.
2. Connect to your local plumbing per the local code.
3. If necessary, insulate drain line to prevent
condensation.
6
Cold
Water
QUICK START GUIDE
u-line.com
Door Swing
Disposal Assembly
P60 Pump Required
Air Gap
(Optional Hook-Up)
Wall
Wall
1/4" Min.
(6 mm)
2-1/8" Min.
(54 mm)
Waste
Hot
Water
Cold
Water
6KXW2ɞ
Valve
90°
Door Swing
90°
Door Swing
Y-Branch Tailpiece
P60 Pump Required
Air Gap
(Optional Hook-Up)
Units have a zero clearance for the door to open 90°,
when installed adjacent to cabinets.
Waste
6KXW2ɞ
Valve
Hot
Water
Stainless Steel and black and white models require 2-1/8"
(54 mm) door clearance to accommodate the handle if
Cold
Water
installed next to a wall.
Integrated models require 1/4" (6 mm) clearance if
installed next to a wall. Allow for additional space for any
NOTICE
knobs or pulls installed on the integrated panel/frame.
The maximum lift for the P60 drain pump is
10 feet. This must be done as close to the rear of
the unit as possible.
7
QUICK START GUIDE
u-line.com
General Installation
INSTALLATION
1. Open the water supply valve in the main water source.
LEVELING INFORMATION
1. Use a level to
2. Plug in the power cord.
confirm the unit is
level. Level should
3. Gently push the unit into position. Be careful not to
be placed along top
edge and side edge
kink the water supply line, the drain line, or entangle
as shown.
the power cord.
4. Re-check the leveling, from front to back and side to
side. Make any necessary adjustments. The unit’s top
1
surface should be approximately 1/8" (3 mm) below
the countertop.
2. If the unit is not level, adjust the feet on the corners of
the unit as necessary.
Turn Foot to Adjust
3. Confirm the unit is level after each adjustment and
repeat the previous steps until the unit is level.
INSTALLATION TIP
If the room floor is higher than the floor in the cut-out
opening, adjust the rear feet to achieve a total unit rear
height of 1/8" (3 mm) less than the opening’s rear height.
Shorten the unit height in the front by adjusting the front
feet. This allows the unit to be gently tipped into the
opening. Readjust the front feet to level the unit after it is
correctly positioned in the opening.
8
QUICK START GUIDE
u-line.com
Control Operation
Alert
Light Power Clean LED
Up Down
CONTROL FUNCTION GUIDE
FUNCTION
COMMAND
DISPLAY/OPTIONS
ON/OFF
Press
Unit will immediately turn ON or OFF.
Adjust ice thickness
See “Ice” section
View temperature in unit
Press
Toggle between F/C
Hold
Sabbath Mode
See “Sabbath Mode” section
and release
and
and
The display will flash and then toggle from set point
together and release
to temperature in unit.
for five seconds
The display will beep and display unit temperature.
Silent Mode (ice
production suspended for
Hold
and
Hold
for five seconds
Display will show “OFF”.
3 hours)
Clean Mode
First Use
Ice
All U-Line controls are preset at the factory. Initial startup
ICE CUBE THICKNESS ADJUSTMENT
requires no adjustments.
NOTICE
Ice thickness adjustment should only be made
NOTICE
one increment at a time. Allow ice maker
U-Line recommends discarding the ice produced
production to stabilize for 24 hours before
during the first two to three hours of operation
rechecking ice thickness.
to avoid possible dirt or scale that may dislodge
from the water line.
Ice cubes in any given batch will vary, so it is necessary
to choose cubes from the sample area for comparison
when making adjustments.
When plugged in, the unit will begin operating under the
factory default settings. If the unit was turned off during
installation, simply press
and the unit will immediately
switch on. To turn the unit off, press
and hold for 5
seconds and release.
9
QUICK START GUIDE
u-line.com
Adjust ice thickness as follows:
The ice cube thickness is factory set for best overall
performance. The factory setting “0” is designed to
maintain an ice bridge of approximately 1/16" to 1/8"
1. Press
(1.6 mm to 3.2 mm) under normal conditions, resulting in
and hold for 5 seconds (display will show
current settings).
a dimple of approximately 1/4" to 1/2" (6.4 mm to
12.7 mm) in depth. A fuller cube with less of a dimple
2. Press
results in a thicker ice bridge. As the ice bridge becomes
to make cube thicker or
to make cube
thinner.
thicker, the tendency for the cubes to stay together as a
slab increases. A bridge thicker than 1/8" (3.2 mm) may
cause cubes to overfill the ice bucket.
The total range of adjustment is -5 (thinest) to +5
(thickest). If further adjustments are desired, repeat
steps 1 and 2.
DIMPLES
L
Sabbath Mode
ICE BRIDGE
Power
Ice Bridge and Dimples
Cube Types
U-Line Clear Ice Machine models are Star-K certified and
1/4" TO 1/2"
(6.4 mm to 12.7 mm)
DIMPLE
1/16" TO 1/8"
(1.6 mm to 3.2 mm)
ICE BRIDGE
can be used during the Sabbath. View a full list of Star-K
certified U-Line units at www.star-k.org.
To prepare the unit for the Sabbath:
1. Press
and hold until the unit turns off.
2. No new ice will form when the unit is off, but previously
made ice will still be accessible/present for over 24
THIN BRIDGE
DEEP DIMPLE
hours. Pump equipped models will continue to remove
THICK BRIDGE
water as needed even if the unit is off.
LITTLE OR
NO DIMPLE
Sabbath Mode remains active until
and the unit turns on.
10
is pressed again
QUICK START GUIDE
u-line.com
Warranty
unit is completed and mailed back or electronically
U-LINE CORPORATION LIMITED WARRANTY
apply to cosmetic damages. A proof of purchase may
1. U-Line Corporation (“U-Line”) warrants each U-Line
be required.
submitted to U-Line. This 30 day warranty does not
product to be free from defects in materials and
workmanship for a period of one year (two years on
4. The following conditions are excluded from this limited
Modular 3000 Series) from the date of purchase.
warranty: use of cleaners other than the recommended
U-Line further warrants the sealed system (consisting
stainless steel cleaners and U-Line Clear Ice Maker
of the compressor, condenser, evaporator, hot gas
cleaner; installation charges; damages caused by
bypass valve, dryer, and connecting tube) in each
disasters or acts of God, such as fire, floods, wind and
U-Line product to be free from defects in materials and
lightning; damages incurred or resulting from shipping,
workmanship for a period of five years from the date of
improper installation, unauthorized modification, or
purchase.
misuse/abuse of the product; customer education
calls; food loss and spoilage; door and water level
adjustments (except during the first 30 days from the
2. During the initial one year warranty period (two years
on Modular 3000 Series) for all U-Line products U-Line
date of installation); defrosting the product; adjusting
shall: (1) repair any product or replace any part of a
the controls; door reversal; and cleaning the
product; and (2) for all Marine, RV and Domestic
condenser.
U-Line products sold and serviced in the United States
(including Alaska and Hawaii) and Canada, U-Line
5. U-Line products are designed to operate in ambient
shall be responsible for the labor costs performed by a
temperatures between 50°F and 100°F unless
U-Line authorized service company, incurred in
otherwise noted in the product manual. Exposure to
connection with the replacement of any defective part.
temperatures outside this range may cause
During years two through five of the warranty period
degradation of performance and issues such as lower
for the sealed system, U-Line shall: (1) at U-Line’s
ice production or spoiled contents that are not covered
option repair or replace any part of the sealed system;
under the terms of this warranty as a result of that
and (2) for all Marine, RV and Domestic U-Line
exposure. U-Line product may not be subjected to
products sold and serviced in the United States
temperatures below 40°F without following the
(including Alaska and Hawaii) and Canada, U-Line shall
winterization and vacation shutdown procedures in the
be responsible for the labor costs incurred in
user guide.
connection with the replacement of any defective part
of the sealed system. All other charges, including
6. U-Line’s Outdoor Limited Warranty, set forth in this
transportation charges for replacements under this
Paragraph 6, shall apply to U-Line models deemed
warranty and labor costs not specifically covered by
suitable for outdoor use by Underwriters Laboratory
this warranty, shall be the responsibility of the
(“UL”) as noted in the U-Line Product Catalog, U-Line’s
purchaser. This warranty extends only to the original
website and/or on the serial tag located inside the
purchaser of the U-Line product. The Product
product.
Registration Card included with the product should be
promptly completed by you and mailed back to U-Line
or you can register on-line at www.u-lineservice.com.
A. Outdoor product may come into contact with rain by
virtue of outdoor use. Exposure to other sources of
water shall also cause this warranty to be void,
3. The warranty listed above does not apply to floor
including flooding of the area in proximity of the unit
display models. The warranty for these models shall
greater than 1/8" deep in water, hurricanes, splashing
be 30 days from the date of retail purchase and only if
U-Line’s Product Registration Card included with the
11
QUICK START GUIDE
u-line.com
of pool water, or directing a spray from a hose or
similar device into and around the unit.
7. If a product defect is discovered during the applicable
warranty period, you must promptly notify either
U-Line at 8900 N. 55th Street, Milwaukee, Wisconsin
53223 USA or at +1.800.779.2547 or the dealer from
whom you purchased the product. In no event shall
such notification be received later than 30 days after
the expiration of the applicable warranty period. U-Line
may require that defective parts be returned, at your
expense, to U-Line’s factory in Milwaukee, Wisconsin,
for inspection. Any action by you for breach of
warranty must be commenced within one year after
the applicable warranty period.
8. THIS LIMITED WARRANTY IS IN LIEU OF ANY AND ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR IMPLIED WARRANTY OF
FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH
ARE DISCLAIMED. U-Line’s sole liability and your
exclusive remedy under this warranty are set forth in
the paragraphs above. U-Line shall have no liability
whatsoever for any incidental, consequential or special
damages arising from the sale, use or installation of
the product or from any other cause whatsoever,
whether based on warranty (express or implied) or
otherwise based on contract, tort or any other theory
of liability.
Some states do not allow limitations on how long an
implied warranty lasts or the exclusion or limitation of
incidental or consequential damages, so the above
limitations may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights
which vary from state to state.
Warranty 6/2014 Rev.G
Copyright © 2014 U-Line Corporation. All Rights Reserved.
Publication Number 30421 8/2014 Rev.A
12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement