Wired Microphones
The
SourceBook
A/VPresentation
PHOTO - VIDEO - PRO AUDIO
Section10
Wired Microphones
AKG........................................................580-586
Audio Technica ...............................587-594
Audix ..............................................................595
Beyerdynamic ...........................................596
Countryman .....................................597-601
Crown Audio....................................602-606
Earthworks ..................................................607
Electro-Voice ....................................608-611
Rode.................................................................612
Sennheiser..........................................613-615
Shure .....................................................616-625
Sony ......................................................626-627
Obtaining information and ordering from B&H is quick and
easy. When you call us, just punch in the corresponding
Quick Dial number anytime during our welcome message.
The Quick Dial code then directs you to the specific
professional sales associates in our order department.
For Section 10, Wired Microphones
use Quick Dial #: 91
580
WIRED MICROPHONES
A KG
C 1000S
Dual Pattern Condenser Microphone
A “do-it-all” microphone famous for its flexibility, the C 1000S is a condenser mic designed for work on
stage. By placing the supplied acoustical converter over the end of the mic capsule— its polar pattern
can be quickly converted from cardioid to hypercardioid —without affecting it’s on-axis response. The
on-axis response of the C 1000S has a gentle (-6 db/octave) roll-off below 200 Hz which has been tailored
for normal close-in use of cardioid and hypercardioid microphones in sound reinforcement applications.
The mic also includes an attachable Presence Boost Adapter (PB1000) for increased intelligibility.
◆ Pristine condenser response, low
◆ Presence Boost Adapter (PB1000) can
noise and rugged construction makes
it ideal for demanding road work
◆ High sensitivity, high SPL handling
with low distortion (137dB for 1.0% THD)
be attached to create an emphasis of
the higher frequencies around 5 to
9kHz by 3 to 5dB.
◆ PPC1000 Polar Pattern Converter
allows quick change from cardioid to
hypercardioid when a more
directional pickup pattern is required.
◆ Extended low and high frequency
response is tailored for close
proximity to sound sources.
◆ Powered by 9-volt battery or 9 to 52v
DC phantom power.
◆ Silent on/off switch is recessed to
prevent inadvertent shutoff.
◆ Includes PB1000, PC1000S, SA63 stand
adapter, W1000 foam windscreen, and
a hard case.
C1000S (AKC1000S)..............................199.95
C1000S
Polar Pattern
D 880M / D 880MS
Cardioid, or hypercardioid (with PPC 1000 attached)
Frequency Range
50 to 20,000 Hz
Sensitivity
6 mV/Pa (-44 dBV)
Maximum SPL
137 dB (k=10⁄0)
Equivalent Noise Level
21 dB-A
Polar Pattern
Super-cardioid
Frequency Range
60 to 20,000 Hz
Sensitivity
Maximum SPL
Equivalent Noise Level
2,2 mV/Pa (-53 dBV re 1 μbar)
147 dB SPL (156 dB SPL for 10⁄0 / 30⁄0 THD)
22 dB (A) to DIN 45412
Impedance
200 ohms
Impedance
<= 600 Ohms
Dimensions
8.6 x 1.3” (Length x Diameter)
Dimensions
7.13 x 2.0” (Length x Diameter)
D 880M / D 880MS Dynamic Vocal Microphones
Rugged dynamic mics, the D 880M and D 880 MS features a hyper-cardioid polar pattern providing maximum gain
before feedback and minimizes noise at the off-axis sections of the capsule. This makes them suitable for live sound
reinforcement and public address situations where monitor speakers and ambient noise may be present. The element
yields a frequency response of 60Hz to 20MHz and features an SPL rating of 147dB.
◆ They have a heavy duty, dent-resistant spring steel windscreen with an integral pop filter (can be removed for cleaning or
replacement) for effective suppression of breath noise.
◆ They incorporate the VariMotion System in which diaphragm thickness varies from 20 microns at the edge to 40 microns
at the center. This distribution of mass produces extended bass response.
◆ A Doubleflex dual shock mount system reduces all kinds of handling and cable induced noise.
◆ These “modular” mics allow users to replace the output stage and XLR connector with an optional TM40 wireless transmitter,
allowing the flexibility to use the microphone with a cable or wireless receiver.
D880M (AKD880M)
With a light-weight body made of die-cast zinc alloy and a black matte soft-touch paint finish for minimum reflection and
glare. It includes an SA 61 Stand Adapter and a case .....................................................................................................................................88.95
D880MS (AKD880SM)
The same as the D880M with an On/Off switch on the modular output stage for added control...............................................98.95
TM 40
PHOTO - VIDEO - PRO AUDIO
(AKTM40): Optional plug-in transmitter module for going wireless with the WMS 40 system .......................................169.95
www.bhphotovideo.com
WIRED MICROPHONES
A KG
581
BOUNDARY MICROPHONES
C 417
C 420
Condenser Lavalier Microphone
Headset Cardioid Condenser Mic
Head-worn condenser
microphone with
wide dynamic range
and full bandwidth
20 - 20 kHz frequency
response for perfect
vocal sound. It
captures the voice
with a detailed,
brilliant sound quality. It provides the performer with a pure, powerful
sound that carries the punch and presence to cut through to the
audience. Ideal for solo vocalists, singing keyboard players, drummers,
guitarists, dancers and anyone who needs high quality vocals in a
hands-free application. A fully adjustable behind-the neck steel
headband and adjustable ear pieces deliver a comfortable and secure
fit, with the cable exiting from the rear of the headband.
The C 417 is an extremely smooth omnidirectional
microphone intended to be worn by speakers
who demand highest audio quality and complete
freedom of movement. An affordable professional
miniature condenser microphone, its broadband,
flat audio reproduction in an omnidirectional
format is ideal for all types of broadcast and
theatrical applications. The sound is extremely
open and natural, making it ideal for wireless or
hardwire multi-mic situations. It is one of the
smallest lavalier microphones available today and
is available in both black and beige versions for ultimate concealing.
Frequency response extends from 20 Hz to 20 kHz, with a 4dB rise at
8 kHz for enhanced intelligibility.
◆ Ultra-slim profile and matte
finish for unobtrusive wearing
◆ Extended low and high
◆ High sensitivity (10 mV/Pa)
◆ High acoustic level capability
(126 dB-SPL for 3% THD)
frequency response
◆ External shock mount for high mechanical-noise rejection
◆ Includes
◆ Omnidirectional pattern for
natural speech quality
◆ Behind-the-head band for comfort and secure mounting
H 40/1 Clip, H 41
Tie pin and W 407 Foam
windscreen
◆ Miniature gooseneck for precise positioning near the user’s mouth
◆ Includes W 44 windscreen
C 417 PP (AKC417) : For hardwire applications, with standard XLR
connector for phantom powering............................................................219.00
C 420 PP (AKC420): For hardwire applications, with standard XLR
connector for phantom powering............................................................199.00
C 417 L: With mini XLR connector for use with battery operated power
supply, an external phantom power adapter, or AKG WMS bodypack
transmitters. Available in black (AKC417L) and beige (AKC417PL) ........149.00
C 420 L (AKC420L): With mini XLR connector for use with B 29 L battery
operated power supply, MPA III L external phantom power adapter, or
AKG WMS bodypack transmitters.............................................................199.00
C 417 a n d C 4 2 0 ACC E S S O R I E S
MPA III L (AKMPAIIIL)
B 29 L (AKB29L)
MicroMic Phantom Power Adapter
Adapter cable with 1/8” lockable jack socket and
male 3-pin XLR connector. It reduces the usual
phantom powering voltage (9 to 52v) supplied
by mixing consoles to the operating voltage
(9v maximum) of the C 417 L or C 420 L...............116.95
MPA III L
B15
B 15 In-line Battery Supply (AKB15)
For the C 417 PP and C 420 PP. An integrated on/off
switch that helps prolong battery life. Uses a single
AAA size 1.5v battery (battery life is 30 hours) ....57.50
B18E
B 18E 18v Battery Power Supply (AKB18E)
Uses two 9v batteries to phantom power the C 417PP
or C 420 PP for up to 100 hours..............................157.50
B29L
Power Supply and Mini Mixer
The B 29 L powers one or two
C 417 L or C 420 L microphones.
It features an on/off switch and a
status LED as well as a mic/line
selector for matching the output
level to the input of the connected
mixer or recorder, etc. It operates
on a 9v battery (battery life is
approximately 50 hours). Two
volume controls allow you to
balance the levels of the two
microphones. A supplied clip
makes it easy to attach to a belt or
guitar strap, etc..........................94.50
(212) 444-6605 • 1-800-947-9905 • Quick Dial 91
PHOTO - VIDEO - PRO AUDIO
582
WIRED MICROPHONES
A KG
BOUNDARY MICROPHONES
C 542 BL
C 400 BL
Omnidirectional Boundary Layer
Condenser Mic
Speech-optimized Hypercardioid
Boundary Layer Condenser Mic
A high-quality boundary microphone
designed to deliver superior results for
a multitude of sound reinforcement
and recording applications. The
boundary layer technique offers
non-directional pickup that is
frequency independent. It is small,
lightweight and easy to place—no
stand is needed. Since the transducer
sits in a metal plate only 0.2” thick, the
plate doesn’t interfere with or color the
sound. Frequency response is very uniform within its hemisphere.
Hypercardioid polar pattern, speech optimized
frequency response and extremely small
dimensions make the C 400 BL the first
choice for any application requiring a small,
low-profile boundary layer microphone.
Uses range from conferencing and lectures
to theaters, surveillance, paging, and many
others. Design is inconspicuous and the
housing can be painted easily in any color to
make it almost invisible against its backing.
◆ Frequency range has been tailored for
speech applications through a gentle bass
roll-off below 200 Hz and a slight high
frequency peak centered at 6 kHz, with a
gentle roll-off above that frequency.
The C 542 BL can be permanently attached to the floor or wall of a
studio using the screw holes in the plate or attached temporarily using
the supplied adhesive compound. Its 3-pin output connector also has
a switchable bass-cut filter to minimize surface-born noise.
◆ The combination of both narrow pickup angle and frequency
◆ Extremely small and inconspicuous, lightweight yet rugged.
response limited to the voice range makes the microphone doubly
insensitive to ambient noise.
◆ Delivers superior sound combined with outstanding ease of use.
◆ High sensitivity and low self-noise ensures generous headroom.
◆ 5’ cable with XLR connector.
◆ Adhesive compound for easy installation.
◆ Universally phantom powered
◆ 10’ cable with XLR connector and integrated bass cut filter.
◆ Matte black finish can be painted to match surrounding decor.
from 9 to 52v DC.
C 680 BL
C 547 BL
Small Cardioid Boundary Layer
Condenser Mic
Hypercardioid Boundary Layer
Condenser Mic with Non-Crush Case
A hypercardioid, studio-quality boundary
mic with a rugged, “non-crush” case and a
switchable bass-cut filter. It features
optimum acoustic properties, high
directivity, and neutral sound. Having the
same frequency response, the C 547 BL
can be combined with the CK47 with
excellent results. The C 547 BL is for use in
places of worship, theaters, and conferencing.
For tabletop use, the C 547 BL-T is identical to C 547 BL, but without a
windscreen.
Small and inconspicuous boundary mic
ideal for table use, lecterns, and houses of
worship. The transducer is internally shock
mounted for immunity to impacts on the
mounting surface. Supplied with a roll of
non-staining double-sided adhesive for
positive mounting of the microphone to a
table or other flat architectural detail.
◆ Phantom powered
from 9 to 52v DC
◆ Can be repainted
Frequency Response
Maximum Input Sound Level
C 542 BL
C 400 BL
C 680 BL
C 547 BL
20Hz - 20kHz
150Hz - 15kHz
60Hz - 20kHz
30Hz - 18kHz
130dB (for 1% THD)
115dB (k=1%)
115dB (k=1%)
133dB
Signal-to-Noise Ratio
78 dB
62 dB
67 dB
22 dB-A
Power Requirements
9v to 52v phantom power
9v to 52v phantom power
9v to 52v phantom power
9v to 52v phantom power
< 600 ohms
200 ohms
200 ohms
200 ohms
3.1 x 0.2” (DxH)
1.7 x 0.9 x 0.6”
3.9 x 2.6 x 0.8”
7.3 x 4.7 x 0.8”
Output Impedance
Dimensions
PHOTO - VIDEO - PRO AUDIO
www.bhphotovideo.com
WIRED MICROPHONES
A KG
583
GOOSENECK MICROPHONES
C 562 CM
Discrete Acoustics Compact Series
Super Small Boundary Mic
Cardioid and Hypercardioid Gooseneck Microphones
The C 562 CM is a flush-mounted boundary
microphone specifically designed for
permanent, “invisible” mounting in ceilings,
walls, tables, stage props, etc. Owing to its
high sensitivity, the C 562 CM is a perfect
tool for surveillance or live recording since a
single microphone can cover an entire room.
The supplied XLR phantom power adapter
connects to the microphone cable through a
miniature connector so installation holes can
be smaller than the diameter of the phantom
power adapter.
C 747
Practically invisible, the
pencil-sized C 747
picks up voices and
instruments at
surprising distances
with phenomenal
fullness and clarity.
The C 747 is a
premium quality “spot”
or “accent” mic designed to solve difficult
placement problems in a variety of exacting
orchestral, choir, podium, and boardroom
applications. Smooth, extended frequency
response makes it suitable for high quality
live music recording, while it’s hypercardioid
response is designed to be “forgiving”,
making it an excellent choice for critical podium/pulpit or boardroom applications where
speakers tend to wander off-axis.
extended bass response, high sensitivity,
and excellent S/N ratio.
◆ LF roll-off switch filters out low-frequency
rumble.
◆ Operates on 9-52v phantom power.
◆ Mounting accessories include shock
mount/adapter, windscreen, mini
gooseneck, swivel stand adapter,
mounting clamp, and thread link.
◆ Choose between cardioid or hypercardioid 12” or 20” goosenecks.
They each feature rugged all-metal parts and are designed as a true
plug-and-play solution. Quick setup and takedown as well as permanent
installations all are possible.
◆ The gooseneck and microphone capsule form an inseparable unit. The
rugged metal front grill is joined permanently to the gooseneck, the
contacts inside are soldered. This protects the delicate condenser capsule
against mechanical stress and electromagnetic interference, and ensures
maximum reliability and excellent audio.
◆ The gooseneck foot features an XLR connector with gold-plated contacts,
Hypercardioid
Condenser Mic
◆ Tuned interference tube provides
A cost-efficient alternative for installations where budget, not modularity
is a major consideration, these goosenecks come with only one flexible
section, a rigid connection between gooseneck and capsule, and a 3-pin XLR
connector for joining the gooseneck to the cable. And while an
excellent price-performance ratio is achieved by focusing on essential
features, no compromise is made with regard to the sound of the capsules.
Each of these capsules provides the outstanding, “legendary” AKG sound.
making connecting and mounting incredibly easy. The metal case also
houses the electronic components of the microphone. The extra-strong flexible section
lets you position the microphone precisely as required.
◆ A wide range of optional accessories ensure optimum installation or placement.
CGN-321E/CGN-521E 12” and 20” Cardioid Gooseneck Mics
The cardioid polar pattern is the most popular because its uses are almost limitless. The
125° pickup angle is especially suited for inexperienced or very “vivacious” talkers who
often fail to talk directly into the microphone.
CGN321E (AKCGN321E): 12” Cardioid Gooseneck Microphone..................................................149.00
CGN521E (AKCGN521E): 20” Cardioid Gooseneck Microphone .................................................149.00
CGN-323E/CGN-523E 12” and 20” Hypercardioid Gooseneck Mics
The hypercardioid polar pattern with its narrow 95° pickup angle is suited best for
situations where noise typically occurs from all sides (particularly in worship centers),
where people talk into the microphone from a greater distance, or where several talkers
are grouped side by side.
CGN323E (AKCGN323E): 12” Hypercardioid Gooseneck Microphone ......................................169.00
CGN523E (AKCGN523E): 20” Hypercardioid Gooseneck Microphone ...................................169.00L
Choosing Polar Patterns
Selecting the correct polar pattern for installed sound is difficult since it depends
on a variety of factors. Of course the acoustics of the room play a key role. For
highly reverberant rooms such as worship centers, a hypercardioid polar pattern
will be the best choice to avoid high levels of unwanted noise.
Correct placement of the loudspeakers is also essential. If the speakers project right
at the capsule, a hypercardioid will be your best bet. The most difficult task is trying
to judge how the talkers will behave. For talkers who are inexperienced or move
around a lot, be sure to choose a cardioid polar pattern for reliable pickup; talkers
at a greater distance from the mic will be served best by a hypercardioid.
(212) 444-6605 • 1-800-947-9905 • Quick Dial 91
PHOTO - VIDEO - PRO AUDIO
584
WIRED MICROPHONES
A KG
DISCRETE ACOUSTICS MODULAR SERIES
Modular Microphone System
The excellent response and extremely good intelligibility make these mics the first choice whenever
quality and reliability have top priority. Used worldwide, AKG’s Discreet Acoustics Modular Series has
proven its worth for many years. It brilliantly fulfills the three key requirements that are essential for
sound system applications.
Modularity: Depending on the specific purpose, “special wishes” can often be fulfilled only by
modular systems. The series offers a choice of five capsule modules with different polar patterns and
frequency responses, as well as a wide range of goosenecks and installation modules. Plus, there are
special-purpose modules for applications that are not covered by any other products
available. They can be used as wireless or lavalier microphones as well as for single-user applications.
Reliability: A wide range of features minimizes the risk of operating errors, material fatigue, or signal
dropouts. The LED ring and self-cleaning gold-plated contacts for the threaded connections are
standard, as are anti-twist cables (HM 1000) and a switchable bass rolloff filter.
Low Profile: Extremely compact design and matte finish underscore their inconspicuous appearance.
The low-profile installation modules ensure quick setup and takedown of all versions of the series.
Goosenecks provide length and mounting options for permanent and semi-permanent installations. The flexible goosenecks allow for silent
positioning of the microphones while the thin profile and matte gray finish make them inconspicuous in use. All models require phantom
power. An LED driven by phantom power enables system status check at a distance. A bass roll-off beginning at 250Hz is provided for control
of proximity effect and low-frequency structural vibrations. Control of the light ring and bass roll-off is handled by internal jumpers. A rugged
connecting thread for the capsule module with large, self-cleaning gold-plated contacts ensures a stable, seamless joint for exceptional
reliability. Gooseneck modules are available in three sizes: 6” (GN15), 12” (GN30) and 20” (GN50) in four distinct product groups:
GN Series: Screw-on Goosenecks
With the exception of the GN30 (unterminated cable ends), GN Series
goosenecks incorporate DPA in-line XLR phantom power adapter with
integrated 200Hz bass rolloff and LED On/Off jumper. The DPA connects
to any mixer input with 9-52v power supply. A slotted bolt and rubber
bushings are included with each unit. The rubber bushings minimize
structure-borne vibrations and the slotted bolt allows the cable and
mini-XLR to pass through any hole from 11mm (0.44”) in diameter. This
eliminates the need for large holes or awkward unsoldering and
resoldering of the bigger phantom power adapter during installation.
GN15 (AKGN15)
6” Gooseneck
GN30 (AKGN30)
12” Gooseneck
GN50 (AKGN50)
20” Gooseneck
GN-E Series: Goosenecks with
Integrated XLR Connector
Same as the GN series, these mics feature an integrated XLR connector
for quick setup and takedown. They plug directly into the supplied PS3
F-Lock, surface mount XLR female receptacle or the optional H500 or
H600 shock mounts. As such, the E-series modules can be easily
removed when not in use. Locking features on the PS3 F-Lock and H600
provide added security when modules must be left in place.
GN15-E (AKGN15E)
6” Gooseneck
PHOTO - VIDEO - PRO AUDIO
GN30-E (AKGN30E)
12” Gooseneck
GN50-E (AKGN50E)
20” Gooseneck
www.bhphotovideo.com
GN-ES Series:
Goosenecks with
Integrated XLR Connector and Switch
The ES series is like the E-series but with the added flexibility of a
noiseless on/off switch integrated into the base of the gooseneck.
Rather than actually disconnecting the signal, it attenuates the
microphone by a minimum of 26dB, thus avoiding the irritating
crackling sound when phantom power is interrupted. Defaults to the
“off” position when the power source is turned off.
GN15-ES (AKGN15ES)
6” Gooseneck
GN30-ES (AKGN30ES)
12” Gooseneck
GN50-ES (AKGN50ES)
20” Gooseneck
GN-E 5-Pin Series:
Goosenecks with 5-pin XLR Connector
and X-large Controllable LED Ring
Similar to the GN-E Series, the GN-E 5-Pin modules come with an
integrated connector with phantom power adapter. One special feature
is the 5-pin XLR connector, which ensures that the extra-large LED ring
can be activated and deactivated using a separate power supply. The
LED ring is extra large for enhanced visibility.
GN15-E5 (AKGN15E5)
6” Gooseneck
GN30-E5 (AKGN30E5)
12” Gooseneck
GN50-E5 (AKGN50E5)
20” Gooseneck
WIRED MICROPHONES
585
A KG
DISCRETE ACOUSTICS MODULAR SERIES
Hanging Module
HM1000
GN 15 HT Gooseneck for Wireless Mic Applications (AKGN15HT)
The GN 15 HT lets you convert an HT 4000 handheld transmitter into a
mobile gooseneck microphone. This setup provides easily accessible
controls and easy battery replacement. Thanks to the sensitive condenser
capsules, working distances can be much greater than with dynamic
wireless microphones. The LED ring illuminates to indicate the transmitter
is ON. The GN 15 HT can be combined with all Discreet Acoustics Capsule
Modules. The gooseneck is suited for any application where a sound
system with wireless microphones need to be set up quickly, e.g., at press
conferences, panel discussions, etc.
Using microphones
flown from the ceiling to
record music or speech
in places of worship,
conference rooms, or
on theater stages is
becoming more and
more popular.
The HM 1000 comes with
a 33’ special cable that
will not twist even if the
temperature varies. A spring steel hanging
clamp offers precise microphone alignment.
GN 30 Minijack Series
GN 15 HT
HM1000 Hanging Module
With 33’ cable. Available in Black (AKHM1000) and
White (AKHM1000W) colors .............................162.95
HM100020 Hanging Module
With 66’ cable. Available in Black (AKHM100020)
and White (AKHM100020W) colors.................178.95
GN 155 Set (AKGN155SET)
Elegant gooseneck
module with heavy,
shock mounted
floor stand in matte
gray finish for use
with all Discreet
Acoustics Capsule
Modules.
Integrated LED ring
status indicator.
Suited for standalone use on stage
or in front of a
lectern.
Two integrated
flexible gooseneck
sections allow
optimum alignment with talkers
of different heights
or positions.
A supplied
screw-on extension
tube can be used
to place the microGN 155 Set
phone higher for
tall talkers. The supplied 33’ cable with XLR
phantom power adapter is long enough to
reach the edge of most stages with no
extension cable. For use as a lectern mic in
worship centers, halls etc.
GN 30
The GN 30 Minijack System makes installing and taking down goosenecks
even quicker than before. The HCS mounting flange is built into the table.
The permanently soldered phantom power adapter can be fastened to the
underside of the tabletop by means of a clamp. The entire wiring remains
invisible. The goosenecks can be mounted and taken down quite easily as
required, while the integrated mini jack ensures perfect contact reliability.
The LED ring can be powered directly. When the gooseneck is detached,
the opening can be closed with the attached flap to prevent dirt or liquids
from getting inside.
The GN 30 Minijack is ideal when goosenecks of different lengths must be
interchanged quickly, or when theft can’t be prevented with standard locking systems. The
goosenecks together with the capsules can be taken to a safe place without having to alter the
setup. All that remains on the table is an unobtrusive disk.
PS 3 F-Lock (AKPS3FLOCK)
Classic lockable mounting accessory for easy, material-friendly installation. Requires a 17mm (0.7”) mounting hole ...........................................54.50
H 500 Shock Mount (AKH500)
PS 3
F-Lock
Designed for permanent installation of E and ES version gooseneck
modules, the H500 provides attenuation of structure-borne noise by
12dB. It consists of a durable plastic shell and flexible inner rubber
boot that allows for quick and easy set up and break down of a sound
system. Requires a mounting hole of 2” (50mm)...................................43.95
H 500
H 600 Shock Mount (AKH600)
Same as above, except the H600 provides maximum attenuation of
structure-borne noise (20 dB). Mount consists of a durable low profile
plastic shell with a flexible inner rubber boot, and for added security,
features a locking clutch that prevents easy removal of the gooseneck
module. Also includes the A 608 insert. The A 608 grips the narrow
section of the gooseneck and allows for custom height adjustments.
Requires a 2.1” (53mm) mounting hole......................................................92.50
H 600
ST45 Table Mount (AKST45)
ST 45
For extremely easy setup and takedown of mobile sound systems.
Solution for mobile applications or installations where supporting
surfaces must not be changed. Massive base and shock absorbing
rubber feet ensure optimum stability and reduce footfall noise..133.50
ST 1 Folding Mini-Tripod (AKST1)
Miniature 10” x 3.3” folding table tripod.....................................................CALL
(212) 444-6605 • 1-800-947-9905 • Quick Dial 91
ST 1
PHOTO - VIDEO - PRO AUDIO
586
WIRED MICROPHONES
A KG
DISCRETE ACOUSTICS MODULAR SERIES
Screw-On Capsule Modules
All Discreet Series capsules feature pre-polarized condenser elements with gold plated contacts to ensure
reliable connections and trouble-free performance. The CK 31, CK 32, CK 33, CK 47 and CK 80 capsules can
be used with any of the “Discreet Acoustics Modular Series” installation modules.
Each 30-series capsule has a dual layer windscreen; the dark gray outer layer disperses the impinging air
stream while the inside layer smooths the air stream before it reaches the diaphragm. This two-stage process
efficiently reduces wind noise while maintaining acoustic transparency. The CK 47 and CK 80 are
supplied with a windscreen that reduces the impinging air stream. This reduction of air velocity reduces
wind noise while maintaining acoustic transparency.
CK 31 Cardioid
Modular Screw-on Capsule
CK 32 Omnidirectional
Modular Screw-on Capsule
CK 33 Hypercardioid
Modular Screw-on Capsule
The cardioid is the most popular polar
pattern since it can be used almost
universally. The 125° pickup angle is
especially suited for inexperienced or
very “vivacious” talkers who often fail to
talk directly into the microphone.
Due to its high sensitivity in all
directions, the CK 32 is an excellent
choice especially for lavalier applications,
but also for situations requiring
ambience pickup.
◆ Cardioid (125°) pickup pattern
◆ Wide 50Hz to 20kHz
Due to the narrow 95° pickup angle, the
hypercardioid polar pattern is a good
choice for situations when noise typically
arrives from the sides (especially in
places of worship), where people talk
into the mic from greater distances, or
where talkers are grouped side by side.
◆ Omnidirectional (360°) pickup pattern
◆ 50Hz to 20kHz frequency response
frequency
CK 80
◆ 50Hz to 20kHz frequency response
response
◆ High performance windscreen
◆ High performance windscreen
◆ High performance windscreen
CK 31 (AKCK31)...........................................89.00
CK 32 (AKCK32) .........................................89.00
CK 33 (AKCK33) ......................................139.00
CK 47 Hypercardioid
Modular Screw-on Capsule
CK 80 Hypercardioid
Modular Screw-on Capsule
The CK 47 combines an 80° pickup angle,
studio quality audio, and clean off-axis
response. It is an ideal tool wherever
studio-standard sound quality is
required, or for inexperienced talkers.
Includes W 70 windscreen.
◆ Hypercardioid (80°) pickup pattern
An 80° pickup angle microphone that is
optimized for speech frequency response
and provides excellent intelligibility in
acoustically critical environments. Its
price/performance ratio is as convincing
as its sound and high gain before
feedback. Includes W 80 windscreen.
◆ Wide 50Hz to 20kHz frequency
◆ 50Hz to 20kHz frequency response
CK 31
CK 32
CK 33
Polar Pattern
Pickup Angle
Frequency Range
Max. SPL
Equivalent Noise Level
Impedance
Dimensions (Diameter x Length)
PHOTO - VIDEO - PRO AUDIO
◆ Speech optimized frequency range
response
◆ Excellent working distance
◆ Excellent working distance
◆ Studio quality - shotgun type
◆ Internal shock mount
CK 47 (AKCK47)...........................................CALL
CK 80 (AKCK80)..........................................89.00
CK 47
CK 31
CK 32
CK 33
CK 47
CK80
Cardioid
Omnidirectional
Hyper-cardioid
Hyper-cardioid
Hyper-cardioid
125°
360°
95°
80°
80°
50 to 20,000Hz
20 to 20,000 Hz
50 to 20,000Hz
20 to 20,000 Hz
60 to 15,000 Hz
125 dB (for 1% THD)
125 dB (for 1% THD)
125 dB (for 1% THD)
133 dB (for 1% THD)
125 dB (for 1% THD)
21 dB-A
20 dB-A
21 dB-A
20 dB-A
17 dB-A
<=600 ohms
<=600 ohms
<=600 ohms
<=600 ohms
<=600 ohms
0.5 x 0.8”
0.5 x 0.8”
0.5 x 0.8”
0.5 x 5.7”
0.5 x 4.8”
www.bhphotovideo.com
WIRED MICROPHONES
AU D I O T E C H N I C A
587
BROADCAST & PRODUCTION MICS
Miniature Condenser Microphones
Designed to be worn on the clothing of performers, Audio-Technica’s miniature
condenser microphones provide excellent yet unobtrusive sound pickup. Their
mic element is enclosed in a rugged housing with low-reflectance finish and
internal construction minimizes handling and clothing noise. The wide-range
capability of these mics ensure clean, accurate reproduction with high
intelligibility for lecturers, singers, and stage performers.
Frequency Response
Maximum SPL Input (Phantom/Battery)
Dynamic Range-Typical (Phantom/Battery)
AT803B
MT830R
AT831b
and
AT831R
AT-803b
AT-831b
AT-831R
MT830R
30Hz - 20kHz
40Hz - 20kHz
40Hz - 20kHz
30Hz - 20kHz
135 dB / 121 dB
135 dB / 121 dB
141 dB
131 dB
106 dB/92dB
106 dB/92dB
112 dB
107 dB
9 - 52v
Phantom Power
9 - 52v
9 - 52v
9 - 52v
Battery Type
1.5V AA
1.5V AA
—
—
18dB/oct @ 150 Hz
18dB/oct @ 80 Hz
—
—
139.95
149.95
183.50
163.95
Low-Frequency Roll-off
Price
AT849 Stereo Condenser Boundary Mic
AT803b
Omnidirectional Condenser Microphone
Intended to be worn on the clothing of performers for excellent,
yet unobtrusive sound pickup. The wide-range capability of
the AT803b ensures clean, accurate reproduction with high
intelligibility for lecturers, singers, stage and TV performers.
◆ AA battery (up to 1200 hours) or 9 - 52v phantom power.
◆ 6’ cable is provided between the mic and power module.
◆ A built-in 3-position switch on the power module allows
selection of off, on/flat response, or on/low-roll-off.
◆ Includes clothing clip, windscreen and carrying case.
The AT849 is a X/Y stereo condenser boundary
microphone designed for surface-mounting.
The two wide-range, optimally-positioned
miniature condenser cardioid elements
provide natural stereo ambience ideally
suited for broadcast and live sound
reinforcement applications.
◆ Consistent, natural sound over a 220° arc.
◆ Fully mono compatible L+R polar pattern is
virtually free of lobes and comb effects.
MT830R
◆ Uniform polar response over an extended, smooth and peak-free frequency
Subminiature Omnidirectional Condenser Mic
The MT830R’s wide-range capability ensures clean, accurate
reproduction with high intelligibility for lecturers, singers, stage
and TV performers, as well as instruments. Runs on 9-52v
phantom power only.
◆ 25’ cable is provided between the mic and power module.
◆ Includes clothing clip and windscreen
AT831b/AT831R
response of 30Hz to 20kHz.
◆ Requires 9-52v DC phantom power per channel.
◆ 2-position switch selects flat or low-roll-off response.
◆ Rugged low-profile housing protected by two layers of perforated steel. The
heavy case and rubber non-slip bottom pad minimizes mechanical coupling
of surface vibrations to the microphone.
◆ Low-reflectance black finish.
◆ Includes a soft pouch and 25’ shielded cable with a five-pin TA5F input
connector and two XLR output connectors.
Cardioid Condenser Microphone
Cardioid versions of the AT803b, the miniature AT831b and
AT831R (phantom power only) are designed for hands-free
applications in sound reinforcement systems. Cardioid pattern
provides improved gain before feedback. Close-up voice pickup
is crisp and clean, yet full sounding. Suppression of background
noise is significantly better than that of full-size microphones.
Same features and accessories as the AT803b.
Broadcast & Production—for entertainment, commercial & industrial use
Audio-Technica’s versatile Broadcast & Production microphones set
standards for clear, intelligible audio production at major broadcast
studios and field production sites around the world. Models are targeted
for every film, TV and radio production need, from ENG and EFP to
soundstages, narration and more.
(212) 444-6605 • 1-800-947-9905 • Quick Dial 91
PHOTO - VIDEO - PRO AUDIO
588
WIRED MICROPHONES
AU D I O T E C H N I C A
BROADCAST & PRODUCTION MICS
AT898 Subminiature Cardioid Lavalier Mic
Designed to be worn as a lavalier or hidden in loose clothing, the discreet-design cardioid
AT898 offers maximum intelligibility, accurate voice reproduction and unobtrusive
appearance for use by lecturers, stage and television talent, and worship leaders. Its
switchable low-frequency roll-off reduces sensitivity to popping. Battery or phantom power.
◆ Maximum intelligibility and clean, accurate
◆ Switchable low-frequency roll-off reduces
reproduction for lecturers, stage and
television talent, and houses of worship
sensitivity to popping in close vocal use
◆ Low-profile design (a mere 5mm in
diameter) is ideal for applications requiring
minimum visibility
◆ 9.8’ cable attached to mic, TA3F connector at
power module
◆ Operates on battery or phantom power
◆ Accessories include power module, clothing
clip, viper clip, magnet clip and lanyard, two
windscreens, three single and two double
mic holders, battery and carrying case
AT898 Lavalier Mic (AUAT898)
With 9.8’ cable, TA3F connector at power module...............................227.50
AT898cT4 Lavalier Mic (AUAT898CT4): No power module. 55” cable
terminated with TA4F connector for Shure wireless systems ...........154.50
AT898c Lavalier Mic (AUAT898C)
Same as the AT898, less power module. Unterminated 55” cable ..139.95
AT898cT5 Lavalier Mic (AUAT898CT5): No power module.
55” cable terminated with TA5F connector for ATW-U101 body-pack
wireless system...................................................................................................154.50
AT898cL4 Lavalier Mic (AUAT898CL4)
Same as the AT898, less power module. 55” cable terminated with Lemo
connector for Sennheiser SK wireless systems.......................................193.50
AT898cW Lavalier Mic (AUAT898CW): No power module. 55” cable terminated with locking 4-pin connector for UniPak wireless systems...154.50
AT899
Subminiature Omnidirectional Lavalier Mic
Designed for high-quality, unobtrusive operation, the AT899 provides maximum
intelligibility and clean, accurate reproduction for vocalists, lecturers, stage and
television talent, and houses of worship. A mere 5mm in diameter, the AT899 is
ideal for applications requiring minimum visibility. The omni element is enclosed
in a rugged, low-profile housing to minimize handling and wind noise.
◆
Supplied accessory kit includes single and double mounts, clothing clip, viper clip, magnetic clip, two open-pore foam windscreens, and two metal
mesh element covers and a convenient carrying case.
AT899 Lavalier Mic (AUAT899)
With a permanently attached 9.8’ cable and a 3-pin TA3F connection to
the supplied AT8537 battery/phantom power module ......................199.95
AT899c Lavalier Mic
Same as the AT898, less power module. Unterminated 55” cable for
custom applications. Available in Black (AUAT899C) and beige “theater”
color (AUAT899CTH) ................................................................................................139.95
AT899cL4 Lavalier Mic
Same as the AT898, less power module. Unterminated 55” cable with
Lemo connector for Sennheiser SK wireless systems. Available in Black
(AUAT899CL4) and beige “theater” color (AUAT899CL4TH).............................193.50
PHOTO - VIDEO - PRO AUDIO
www.bhphotovideo.com
AT899cT4 Lavalier Mic (AUAT899CT4): No power module. Unterminated
55” cable with TA4F connector for Shure wireless systems................154.50
AT899cT5 Lavalier Mic (AUAT899CT5): Same as the AT898, less power
module. Unterminated 55” cable with TA5F connector for ATW-U101
body-pack wireless system. Black finish....................................................139.95
AT899cT5-TH Lavalier Mic (AUAT899CT5TH)
Same as AT899cT5 but in beige “theater” color......................................154.50
AT899cW Lavalier Mic: Same as the AT898, less power module.
Unterminated 55” cable with locking 4-pin connector for A-T UniPak
wireless systems. Available in Black (AUAT899CW) and beige “theater” color
(AUAT899CWTH) ........................................................................................................159.95
WIRED MICROPHONES
AU D I O T E C H N I C A
589
BROADCAST & PRODUCTION MICS
AT892 MicroSet
Omnidirectional Condenser Headworn Mic
With a capsule diameter of just 2.5mm, the AT892 MicroSet provides the ultimate in
low-profile, high-performance audio. It offers an ergonomic under-ear design with
flexible, lightweight contoured loop hooks behind either ear for an ultra-secure,
comfortable fit with or without glasses. Delivers extremely intelligible audio. Ruggedly constructed for day-to-day use in
production, house-of-worship and theater settings.
AT892c MicroSet: With 55” unterminated cable for custom wiring
applications. Available in Black (AUAT892C), beige “theater” (AUAT892CTH)
and cocoa (AUAT892CCO) color.
AT892cT4 MicroSet: 55” terminated cable with TA4F connector for
Shure wireless systems. Available in Black (AUAT892CT4), beige “theater”
(AUAT892CT4TH) and cocoa (AUAT892CT4CO) color.
AT892cL4 MicroSet: 55” terminated cable for Sennheiser wireless
systems using Lemo connector. Available in Black (AUAT892CL4), beige
“theater” (AUAT892CL4TH) and cocoa (AUAT892CL4CO) color.
AT892cT5 MicroSet: 55” terminated cable with TA5F connector for
ATW-U101 and Lectrosonics wireless systems. Available in Black
(AUAT892CT5), beige “theater” (AUAT892CT5TH) and cocoa (AUAT892CT5CO) color.
AT892cLM3 MicroSet: 55” terminated cable for Sennheiser wireless
systems using a locking 3.5mm connector. Available in Black (AUAT892CLM3),
beige “theater” (AUAT892CLM3T) and cocoa (AUAT892CLM3C) color.
AT892cW MicroSet: 55” cable terminated with locking 4-pin connector
for A-T UniPak wireless systems. Available in Black (AUAT892CW), beige
“theater” (AUAT892CWTH) and cocoa (AUAT892CWCO) color.
AT804 Omnidirectional
Moving Coil Dynamic Mic
AT808G Subcardioid
Dynamic Console Mic
Designed for use in broadcasting
studios, high-quality sound
reinforcement, and other
demanding sound pickup
situations. Hardened-steel grille
and die-cast case make the mic
ideal for field applications where
rugged construction is essential.
The omnidirectional polar
patterns ability to pick up sound equally from all directions means that
with close-up miking, the mic won’t accentuate bass frequencies due to
proximity effect. The omnidirectional pattern is also ideal for distant
miking where the reproduction of ambient environments is desired.
Designed for use as a quality talk-back
microphone in entertainment, commercial and
industrial applications, the AT808G features a
versatile gooseneck design that allows for
unlimited positioning and dependable
performance. Its custom-tailored frequency
response ensures excellent intelligibility in
environments with excessive ambient noise.
The mic’s subcardioid polar pattern reduces
pickup of sounds from the sides and rear,
improving isolation of desired sound source.
◆ Protective windscreen and rugged
construction
◆ Rugged die-cast case with hardened steel grille stands up to field use
◆ Plugs directly into an XLRF-type surface or
◆ Internal shock mounting reduces handling and cable noise.
cable connector
◆ Includes a snap-in clamp and soft protective pouch
◆ Overall length of 16.2”
AT-892
AT-804
Condenser
Moving Coil Dynamic
Dynamic
Omnidirectional
Omnidirectional
Subcardioid
Frequency Response
20Hz - 20kHz
50Hz - 15kHz
200Hz - 5kHz
Power Requirements
Voltage Range: 2.5-11V
None
None
.32 x .11”
5.94 x 1.42”
16.2 x .98”
Transducer
Polar Pattern
Dimensions (Length x Diameter)
AT-808G
(212) 444-6605 • 1-800-947-9905 • Quick Dial 91
PHOTO - VIDEO - PRO AUDIO
WIRED MICROPHONES
590
AU D I O T E C H N I C A
PRO SERIES
Pro49Q
Installed-Sound Condenser Microphones
From ceilings to stage floors, from podiums to tabletops, ProPoint microphones
have your miking needs covered.
◆ Wide-range condenser elements with
need for external power modules
placement, long-life goosenecks
maximum rejection of unwanted sounds
◆ Low-profile boundary mics for minimum
◆ Flat, smooth frequency response, high-SPL
visibility
handling for voice, choir and orchestra
◆ Rugged design and construction for
◆ They operate on 9-52v DC phantom power
Frequency Response
Open Circuit Sensitivity
Impedance
Maximum SPL Input (1kHz at 1% T.H.D.)
Pro45
◆ Podium mics feature quiet, fixed-
◆ Uniform cardioid polar pattern for
Polar Pattern
Pro44
◆ Self-contained electronics eliminate the
low-mass diaphragms for superior
performance
Element
Pro47T
Pro42
reliable service
PRO 42
PRO 44
PRO 45
PRO 47T/TL
PRO 49Q/QL
Condenser
Condenser
Condenser
Condenser
Condenser
c
c
c
c
c
70 - 14k Hz
70 - 16k Hz
70 - 16k Hz
70 - 16k Hz
70 - 16k Hz
-38 dB (12.5 mV)
-25 dB (56.2 mV)
-37 dB (14.1 mV)
-37 dB (14.1 mV)
-37 dB (14.1 mV)
100 Ω
100 Ω
100 Ω
100 Ω
100 Ω
134 dB SPL
114 dB SPL
134 dB SPL
134 dB SPL
134 dB
Signal to Noise Ratio (1kHz @ 1 Pa)
65 dB
66 dB
66 dB
66 dB
66 dB
Dynamic Range (Typical) (1 kHz @ Max SPL)
105 dB
86 dB
106 dB
106 dB
106 dB
Phantom Power (2.0mA Typical)
9 - 52V
9 - 52V
9 - 52V
9 - 52V
9 - 52V
Price
88.95
96.95
79.95
114.95 / 122.95
96.95 / 98.95
Pro 42 / Pro 44 Cardioid Boundary Mics
The miniature Pro 42 and low-profile Pro 44 are wide-range condenser
microphones with a hemi-cardioid (half-space cardioid) polar pattern
designed for surface-mounted applications in high-quality sound
reinforcement and other demanding sound pickup situations.
◆ Miniature Pro 42 measures 1.44 x 2.14 x .61” (WDH) while the
low-profile Pro 44 measures 2.87 x 3.56 x .59” (WDH)
◆ The Pro 42 (permanently-attached) and Pro 44 (detachable) include
a 25’ cable with XLRM-type connector
◆ Mic elements are enclosed in a a rugged case and protected by
heavy perforated steel. The rubber non-slip bottom pad minimizes
mechanical coupling of surface vibrations to the microphone
Pro 47T / Pro 47TL
Cardioid Thread-Mount Gooseneck Mics
Designed for high-quality sound reinforcement and other
demanding sound pickup situations. Standing 12.4” (Pro 47T) and
15.7” (Pro 47TL) above the mounting surface, their small-diameter
alternating gooseneck design permits highly flexible positioning
while maintaining a smooth, well-contoured surface.
◆ 9.8’ permanently-attached cable with an XLRM-type connectors
◆ Mic element is enclosed in a rugged housing with a low-reflectance
black finish. A 5/8”-27 threaded flange allows the mic to mate
with the threads of a standard microphone desk or floor stand.
A 5/8” -27 threaded stud is also provided so it can be secured to a
permanent mounting surface.
Pro 45 / Pro 45W Cardioid Hanging Mics
The Pro 45 is furnished with a vinyl-coated steel hanger that allows it to
be positioned inconspicuously over a choir, orchestra, stage, etc., for
low-profile situations.
◆ Has a 25´ permanently- attached cable with XLRM-type connector
◆ Enclosed in a rugged housing with a low-reflectance black finish.
Also available with a white-finished (Pro 45W) mic housing, cable and
steel hanger for the times you need the mic hung against a light
background
PHOTO - VIDEO - PRO AUDIO
www.bhphotovideo.com
Pro 49Q / Pro 49QL
Cardioid Quick-Mount Gooseneck Mics
With an overall length of 13.07” (Pro 49Q) and 16.46” (Pro 49QL), their
small-diameter alternating goose-neck design permits highly flexible
positioning while maintaining a smooth, well-contoured appearance.
◆ XLRM-type connector insert at their base allows them to be
plugged directly into an XLRF-type jack or cable connector
WIRED MICROPHONES
AU D I O T E C H N I C A
591
PRO SERIES
Pro 8HEx Headworn Hypercardioid Dynamic Microphone
The PRO 8HEx is a lightweight, headworn dynamic mic ideal for aerobics instructors and for anyone who
needs a professional-quality mic with hands-free operation. Featuring a Hi-ENERGY Neodymium magnet
with almi-chromate coating, the motor structure ensures excellent transient and frequency response, reduces
distortion, and provides a high output level not normally achieved by other headworn dynamic microphones.
The result is crisp, clean vocal pickup.
◆ Combination of hypercardioid polar pattern and
headworn design provides background noise
suppression that is significantly improved over
that of full-size, stand-mounted cardioid mics.
◆ Features include a mic capsule moisture barrier, a
durable cable assembly, and a covered stainless
steel headband which can be flexed to adjust for a
comfortable fit around the back of any head.
◆ Includes a permanently attached 7.2’ cable with XLR-M connector, two wind screens (large and small) and
a clothing clip.
Pro 70 Cardioid Condenser Lavalier Microphone
This miniature condenser microphone achieves full-sounding pickup and is known for outstanding
consistency and dependable performance. Supplied with a clothing clip, it provides natural and
articulate vocal reproduction when used as a clip-on lavalier. The Pro 70 is designed to make
speech clearly and comfortably audible, yet never draw attention to itself or its operation. The
versatile Pro 70 can be powered by battery or phantom power. Its cardioid polar pattern reduces
pickup of sounds from the sides and rear, improving isolation of the desired sound source.
Low-frequency roll-off switch allows for reduced pickup of room noise.
◆ Miniature condenser microphone ideal for
vocal applications
◆ Corrosion-resistant contacts from gold-plated
XLRM-type connector
◆ 6’ cable is permanently attached between the microphone and the power module.
Pro 31/41/61 Cardioid and
Hypercardioid Dynamic Handheld Mics
These affordable cardioid dynamic microphones are designed for close-up vocal performance. The
PRO 31 offers a broad frequency response and low handling noise in a tough, durable design. It sets
the price/performance standard for intelligibility, transparent sound quality and noise suppression.
The PRO 41 cardioid dynamic step-up is built to survive the realities of day-to-day use and still produce
clear, full-range vocal reproduction every time. Its superior internal shock mounting reduces handling noise. With its extended frequency response,
the PRO 61 provides optimal clarity and smooth, natural sonic characteristics. Its hypercardioid polar pattern improves isolation of the sound source.
They Feature:
◆ Cardioid polar pattern reduces pickup of sounds from the sides and
rear, improving isolation of desired sound source
◆ Hi-ENERGY neodymium magnet for high output and articulate vocal
reproduction
◆ Two-stage ball-type headcase for superior “pop” protection
◆ MagnaLock on/off switch
◆ Corrosion-resistant contacts from gold-plated XLRM-type connector
PRO 41 Step-up Features:
◆ Superior internal shock mounting reduces handling noise
PRO 61 Step-up Features:
◆ Extended frequency response provides optimal clarity and smooth,
natural sonic characteristics
◆ Hypercardioid polar pattern improves isolation of desired sound
source
(212) 444-6605 • 1-800-947-9905 • Quick Dial 91
PHOTO - VIDEO - PRO AUDIO
592
WIRED MICROPHONES
AU D I O T E C H N I C A
UNIPOINT SERIES
Cardioid and Line Cardioid
Hanging Condenser Microphones
Audio-Technica’s wide-range of miniature cardioid condenser hanging microphones
are designed for use in high-quality sound reinforcement, television, and other
demanding sound pickup applications. They are ideal for speech, theater, orchestra
and choir sound reinforcement. With robust construction, unobtrusive appearance,
and unsurpassed immunity to radio frequency interference, these hanging mics offer
sophisticated and versatile sound-reinforcement solutions.
Equipped with A-T’s new UniGuard technology, thy offer unsurpassed immunity from
radio frequency interference. All feature an 80Hz low-cut UniSteep filter that reduces
pickup of low-frequency ambient noise, while preserving a full sound.
Interchangeable condenser elements (cardioid, hypercardioid, omnidirectional and UniLine line cardioid) offer superior
on- and off-axis response, resulting in truly exceptional sonic quality and an angle of acceptance from 90° to 360°. They
are furnished with a vinyl-coated steel hanger that allows them to be positioned inconspicuously for very low-profile
situations and they all include a windscreen, power module, and a permanently attached 25’ cable. Elements are enclosed
in either a low-reflectance black or a white-finished housing, cable and steel hanger.
U853A Cardioid Condenser
Operates on battery or phantom power.
Available in Black (AUU853A) or White (AUU853AW)
finish....................................................................218.50
U853A
Frequency Response
U853R
U853PM
30Hz - 20kHz
30Hz - 20kHz
30Hz - 20kHz
80 Hz, 18dB/octave
80 Hz, 18dB/octave
80 Hz, 18dB/octave
Phantom: 200 ohms
Battery: 270 ohms
250 ohms
200 ohms
128dB SPL
Phantom: 133dB
Battery: 123dB
128dB SPL
Dynamic Range (Typical)
1 kHz at Max SPL
Phantom: 109 ohms
Battery: 99 ohms
115 dB
102 dB
Signal-To-Noise Ratio
Low Frequency Roll-Off
Open Circuit Sensitivity
U853AU UniLine Condenser
Operates on battery or phantom power; and
features a narrow 90º acceptance angle.
Available in Black (AUU853AU) or White
(AUU853AUW) finish ...........................................239.95
U853R Cardioid Condenser
Operates on 11v to 52v phantom power only.
Available in Black (AUU853R) or White (AUU853RW)
finish....................................................................184.50
Impedance
Maximum Input Sound Level
(1kHz at 1% T.H.D.)
70 dB, 1 kHz at 1 Pa
70 dB, 1 kHz at 1 Pa
68 dB, 1 kHz at 1 Pa
Mic Module Dimensions
.34 x .48” (L x D)
1.34 x .48” (L x D)
1.34 x .48” (L x D)
Power Module Dimensions
2.48 x .87” (L x D)
3.66 x .74” (L x D)
4.55 x 1.42” (L x D)
U853RU UniLine Condenser
Operates on phantom power only; narrow 90º
acceptance angle. Available in Black (AUU853RU)
or White (AUU853RWU) finish .........................202.95
U853PM Cardioid Condenser
Operates on phantom power only; wall/ceiling
plate power module. Available in Black
(AUU853PM) or White (AUU853PMW) finish ...184.50
U853PMU UniLine Condenser
Operates on phantom power only; wall/ceiling
plate power module; narrow 90º acceptance
angle Available in Black (AUU853PMU) or White
(AUU853PMUW) finish ........................................202.95
PHOTO - VIDEO - PRO AUDIO
R E P L AC E M E N T E L E M E N T S
Add versatility to your UniPoint microphones. Different pickup patterns are available with the
same high-quality UniPoint design, via interchangeable elements. These elements are screw-on
replacements for all AT851, AT853, AT857, AT871 and AT873R models.
Cardioid Element (AUAT853CELE)
Omnidirectional Element (AUAT853OELE)
Supplied with AT851, AT853, AT857 and AT871.
120° frontal pickup pattern .........................54.95
Allows operation in all directions with a 360°
pickup pattern .............................................54.95
Hypercardioid Element (AUAT853HELE)
Subcardioid Element (AUAT853SCELE)
Supplied with AT873R. Increases directionality
to 100° to provide better gain-before-feedback
and reduction of background noise ........54.95
This optional subcardioid element allows a
wider 170° frontal working area than a
standard cardioid........................................54.95
www.bhphotovideo.com
WIRED MICROPHONES
AU D I O T E C H N I C A
593
UNIPOINT SERIES
Gooseneck Condenser Microphones
UniPoint adjustable gooseneck mic s are the flexible choice for boardroom,
school, government, house of worship and other installed applications
worldwide. These distinctive, durable mics feature an improved small-diameter
gooseneck with virtually no “memory”. The ultra-flexible, robust design permits
easy adjustment into desired shape while resisting inadvertent repositioning:
When you move the gooseneck, it stays put.
Equipped with A-T’s innovative UniGuard technology, they all deliver unsurpassed
immunity from radio frequency interference. And all feature an 80 Hz UniSteep
filter that reduces pickup of unwanted low-frequency ambient noise.
Interchangeable elements (cardioid, hypercardioid, omnidirectional and UniLine
line cardioid) offer an angle of acceptance from 90° through 360° and superior
on- and off-axis response for exceptional sonic quality. A two-stage foam
windscreen yields outstanding resistance to P-pops and other breath blasts.
U857RL
U857R
U857AL
U857Q
U857AL
U857QU/U857QLU
U857R/U857RL
Cardioid Condenser Adapter-Mount
UniLine Condenser Quick-Mount
Cardioid Condenser Adapter-Mount
◆ Direct mounts to any 5/8”-27 stand, or to
◆ UniLine polar pattern provides narrow 90°
included threaded mounting flange.
◆ Direct mounts to any 5/8”-27 stand, or to
acceptance angle
◆ Operates on a single AA battery for up to
1200 hours or 11-52V DC phantom power.
U857AL (AUU857AL) .......................................247.50
included threaded mounting flange.
◆ Phantom-powered, self-contained
electronics. There is no need for an external
power module
◆ Operates on phantom power only.
U857R (AUU857R): 12.01” length .................209.50
U857RL (AUU857RL): 16.7” length ...............209.50
◆ Quick-mount design with 3-pin XLR-M
U857AU
UniLine Condenser Adapter-Mount
◆ UniLine polar pattern provides narrow 90°
acceptance angle.
connector insert at the base allowing it to
be instantly installed and removed. Plugs
directly into any XLRF-type surface or cable
connector.
◆ Supplied shock mount attenuates noise,
◆ Direct mounts to any 5/8”-27 stand, or to
shock and vibration transmitted through
the mounting surface.
included threaded mounting flange.
◆ Operates on a single AA battery for up to
1200 hours or 11-52V DC phantom power.
U857AU (AUU857AU) ......................................266.50
U857Q/U857QL
Cardioid Condenser Quick-Mount
◆ Phantom-powered, self-contained electronics
U857QU (AUU857QU): 19.2” length .............219.95
U857QLU (AUU857QLU): 23.7” length........223.50
Frequency Response
Low Frequency Roll-Off
1
Open Circuit Sensitivity
— no need for an external power module.
◆ Quick-mount design with 3-pin XLRM-type
connector insert at base plugs into any XLRFtype surface or cable connector.
◆ Supplied shock mount attenuates noise,
shock and vibration transmitted through the
mounting surface.
U857Q (AUU857Q): 14.4” length ..................199.95
U857QL (AUU857QL) 18.9” length ...............199.95
Impedance
Max. Input Sound Level
2
Dynamic Range (Typical)3
Signal-To-Noise Ratio
◆ Narrow 90° acceptance angle.
◆ Direct mounts to any 5/8”-27 stand, or to
included threaded mounting flange.
◆ Operates on phantom power only.
U857RU (AUU857RU): 16.8” length .............232.50
U857RLU (AUU857RLU): 21.4” length .........232.50
U857A
U857Q
U857R
30Hz - 20kHz
30Hz - 20kHz
30Hz - 20kHz
80 Hz, 18dB/octave
80 Hz, 18dB/octave
80 Hz, 18dB/octave
Phantom:–42dB (7.9mV)
Battery: –43dB (7.0mV)
–39dB (11.2mV)
–39dB (11.2mV)
200 ohms / 270 ohms*
250 ohms
250 ohms
133dB / 123dB*
139dB SPL
139dB SPL
109dB / 99dB*
115 dB
115 dB
70 dB, 1 kHz at 1 Pa
70 dB, 1 kHz at 1 Pa
70 dB, 1 kHz at 1 Pa
0.48” / 0.74”
0.48” / 0.74”
Head / Base Diameter
1. re 1V at 1 Pa
U857RU/U857RLU
UniLine Condenser Adapter-Mount
2. 1kHz at 1% T.H.D.
0.48” /
3. 1 kHz at Max SPL
*Phantom / Battery
(212) 444-6605 • 1-800-947-9905 • Quick Dial 91
PHOTO - VIDEO - PRO AUDIO
594
WIRED MICROPHONES
AU D I O T E C H N I C A
UNIPOINT SERIES
Boundary Condenser Microphones
Offering outstanding sound for surface-mount applications, Audio-Technica’s boundary microphones are ideal for
high-quality sound reinforcement and conferencing application. Their small size makes them ideal in situations where
minimum visibility is required. Features include a PivotPoint rotating output connector, UniSteep filter and UniGuard
RFI-shielding technology. Available in omnidirectional (half space) or hemi-cardioid (half-space cardioid) polar patterns,
the microphones are enclosed in a rugged die-cast case and protected by two layers of perforated steel. The combination
of heavy die-cast case and rubber non-slip bottom pad minimizes mechanical coupling of surface vibrations to the
microphone. With superior off-axis rejection and maximum gain-before-feedback, these professional mics set audioquality standards in challenging acoustic environments.
T H E Y A L L F E AT U R E
◆ Designed for surface-mount applications such as high-quality sound
◆
Superior off-axis rejection for maximum gain before feedback.
reinforcement, professional recording, television, conferencing and
other demanding sound pickup situations.
◆ UniSteep filter (except the U841A) provides a steep low-frequency
◆ PivotPoint rotating output connector allows cable to exit from either
◆ Small-diameter UniPoint capsule near boundary eliminates phase
attenuation to improve sound pickup without affecting voice quality.
the rear or the bottom of the microphone.
◆ UniGuard RFI-shielding technology offers outstanding rejection of
distortion and delivers clear, high-output performance.
◆ Heavy die-cast case and non-slip silicon foam bottom pads minimize
coupling of surface vibration to the microphone.
radio frequency interference (RFI).
U841A Omnidirectional (Half Space) Condenser Boundary Mic
Low-profile design with low-reflectance black finish for minimum visibility, the U841A features an omnidirectional polar pattern
to offer a 360° pickup angle. Operates on a AA battery (up to 1200 hrs) or 11-52v phantom power. Built-in 3-position switch on
the AT8531 power module allows selection of off, on/flat response or on/low-roll-off. 25’ cable with TA3F-type connectors for
use between the microphone and the AT8531 power module is provided.
U841A Black finish (AUU841A) ........................................................................................................................................................................................229.95
U891R Cardioid Condenser Mic
U851A Cardioid Condenser Mic
◆
Low-profile design with low-reflectance black
finish for minimum visibility. Operates on a
single AA battery battery (up to 1200 hrs) or
11-52v DC phantom power.
◆ Phantom-powered (11-52v DC) U891R features
a programmable three mode touch-sensitive
on/off switch: touch-on/touch-off, touch-totalk (momentary on) and touch-to-mute
(momentary off )
◆ Built-in 3-position switch on the power
module allows selection of off, on/flat
response or on/low-roll-off.
◆ Red LED indicates when the mic is “on.”
◆ 2-position switch permits choice of flat response or low-frequency
roll-off to help control undesired ambient noise
◆ 25’ cable with TA3F-type connectors for use between the microphone
and the AT8531 power module is provided.
U851A Black finish (AUU851A) ........................................................................219.95
◆ A 25’ shielded cable with TA3F and XLRM-type connectors is provided
for use between the microphone and electronics inputs
U891R Black finish (AUU891R), U891RW (AUU891RW) ...............................228.50
U851R Cardioid Condenser Mic
◆ Phantom-powered (11-52v) U851R is equipped with self-contained
electronics, eliminating the need for an external power module.
◆ Recessed switch in the power module permits choice of flat response
or low-frequency roll-off to help control undesired ambient noise
◆ Includes 25’ miniature cable with a TA3F plug for connecting to the
microphone
U851R Black finish (AUU851R), U851RW White (AUU851RW) .................192.50
PHOTO - VIDEO - PRO AUDIO
www.bhphotovideo.com
U891RC Cardioid Condenser Mic
◆
Same as above, except the ultra-smart U891RC is equipped with local
or remote switching options. For flexible control in conference and
boardroom installations, the unit’s external contact closure ability
allows a user to trigger an external device—a camera, for instance—
from a switch on the microphone. External LED control allows for
accurate depiction of the live status of the microphone.
U891RC Black finish (AUU891RC) ....................................................................239.95
WIRED MICROPHONES
AU D I X
595
ADX SERIES
Contractor Microphones
Designed for professional sound contracting, installation, and live sound reinforcement applications, the ADX series
consists of pre-polarized, low impedance condenser microphones that operate on 9-52v phantom power. In cases where
phantom power is not readily available, Audix offers a phantom battery pack (PS-911) which operates on a single AA
battery. In the case of the podium microphones, there is an optional table-mount stand (ATS-10) with heavy-duty on-off
switch and LED indicator making them excellent choices for teleconferencing. The series includes the micro-sized ADX10
lavalier mic, ADX212 and 218 podium mics, the ADX40 hanging choir mic, and the ADX60 boundary microphone.
ADX10 Miniature Cardioid
Condenser Lavalier Mic (AUADX10)
ADX212 Gooseneck
Podium Microphones
The ADX10 is a mini-size cardioid lavalier with
a smooth frequency response (50Hz-18kHz)
ADX10 shown
and studio quality sound. It includes a
on an optional
tie clip
phantom power adapter (APS-910) and a
6’ cable which terminates to a miniature
3-pin Switchcraft XLR connector (TA3F) ........................................................129.00
The ADX212 (cardioid) and
ADX212HC (hypercardioid) are
miniature pre-polarized
condenser microphones
designed for professional speech
and vocal applications in live
sound and broadcast. Most
commonly used for pulpits,
podiums, board meetings, and
teleconferencing, they have a
12” shaft with flex gooseneck
near the base and a cardioid
or hypercardioid element.
ADX60 Low-Profile Cardioid
Boundary Microphone (AUADX60)
A pre-polarized cardioid condenser mic that can
handle a wide variety of recording and live
sound applications as well as permanent
installations. Ideal for podium, room ambience,
theater, plays, choirs, and teleconferencing.
Includes the APS-910 phantom power adapter ................................................Call
ADX40 Overhead
Condenser Microphone
ADX212 Cardioid Microphone (AUADX212) ..........................................Call
ADX212HC Hypercardioid Microphone (AUADX212HC) ..................Call
ADX218 Gooseneck Podium Microphones
A miniature, pre-polarized condenser mic that is
designed to hang from an overhead position for
applications in professional live sound, music and
broadcast. With a smooth uniform response over
a frequency range of 20Hz to 20kHz, the ADX40
provides a warm, rich sound not typical of mics
this size. Machined from solid brass and available
in non-reflective black or white. It includes a
phantom power adapter (APS-910) and an
attached 30’ cable terminating to a miniature
3-pin Switchcraft XLR connector (TA3F).
ADX40 Overhead Condenser Microphone (AUADX40)
Cardioid pattern. Non-reflective black color ......................................................Call
ADX40W Overhead Condenser Microphone (AUADX40W)
Cardioid pattern. Non-reflective white color......................................................Call
ADX40HC Overhead Condenser Microphone (AUADX40HC)
Hypercardioid pattern. Non-reflective black color...........................................Call
ADX40WHC Overhead Condenser Microphone (AUADX40WHC)
Hypercardioid pattern. Non-reflective black color...........................................Call
The ADX218 (cardioid) and ADX218HC (hypercardioid) are the same
as the ADX212 mics, except they come with an 18” gooseneck.
ADX218 Cardioid Microphone (AUADX218) ..........................................Call
ADX218HC Hypercardioid Microphone (AUADX218HC) ..................Call
Table Stand (AUATS10)
The ATS10 heavy-duty table stand
provides the ultimate in flexibility and
portability. Since the electronics for the
ADX212/218 are built right into the
base of the mic, all that is needed is to
plug the mic directly into the table
stand connector on the top of the base. The mic cable will be
plugged into the back of the base and connected to a low
impedance mic level input on the mixer or recording device. It has
a 2-position on/off switch and LED indicator for mic on. Phantom
power is required to operate .......................................................................Call
Rubber Shockmount (AUSMT1218R)
The optional SMT-1218R rubber shockmount is used when further
shockmount or isolation is required for the ADX212/218 ..............25.00
(212) 444-6605 • 1-800-947-9905 • Quick Dial 91
PHOTO - VIDEO - PRO AUDIO
596
WIRED MICROPHONES
B E YE R DYN A M I C
SHM SERIES
SHM 201 AS
SHM 203F
SHM 205 G
SHM 205 AS
Miniature Condenser
Gooseneck Microphones
Beyerdynamic’s SHM 200 series are high output, miniature condenser gooseneck
microphones with extraordinary sensitivity. Their cardioid polar pattern reduces
undesirable off-axis sound while providing outstanding gain before feedback.
They are ideal for speech applications such as meetings, teleconferencing,
speaker’s desks, control and mixing consoles, conference halls, sport arenas—
anywhere maximum speech intelligibility, high gain before feedback and
unobtrusive design are required.
They have a sophisticated, modern design that allows the microphones to
blend into each architectural environment perfectly. The mics are mounted on
an 8mm thick gooseneck and are powered with any 11-52v phantom power
source. For connection the microphones are fitted with a XLR-plug, XLR-socket,
Nexusplug or 5/8” thread. Some with XLR-plug or socket are available with an
on/off switch. Optional anti-vibration base plates complete the product range.
Available in black in different lengths with or without illuminated ring.
SHM 201 A (BESHM201A)
SHM 205A (BESHM205A)
SHM 213 A (BESHM213A)
4” Condenser with XLR male .....................194.95
20” Condenser with XLR male...................198.50
SHM 201 AS (BESHM201AS)
SHM 205AS (BESHM205AS)
12” Condenser with 5-pin XLR male and
illuminated power indicator ring.............222.50
4” Condenser with XLR male and On/Off
switch .................................................................199.95
20” Condenser with XLR male and On/Off
switch .................................................................238.50
SHM 201 AZ (BESHM201AZ)
SHM 205G (BESHM205G)
4” Condenser with XLR male and shock-mount
fixture .................................................................209.95
20” Condenser, 5/8” female thread, with
pre-amplifier ..................................................238.50
SHM 214 A (BESHM214A)
16” Condenser with 5-pin XLR male and
illuminated power indicator ring.............229.95
SHM 215 A (BESHM215A)
Same as above except 20” long................238.50
SHM 201 ASZ (BESHM201ASZ)
4” Condenser with XLR male, On/Off switch
and shock-mount fixture ............................218.95
SHM 203A (BESHM203A)
12” Condenser with XLR male ...................182.95
SHM 203AS (BESHM203AS)
12” Condenser with XLR male and On/Off
switch .................................................................198.50
SHM 203F (BESHM203F)
12” Condenser with XLR-F...........................182.95
SHM 203G (BESHM203G)
12” Condenser, 5/8” female thread, with
pre-amplifier....................................................222.50
SHM 204A (BESHM204A)
16” Condenser with XLR male ...................189.95
SHM 204 AS (BESHM204AS)
16” Condenser with XLR male and
On/Off switch ..................................................198.50
PHOTO - VIDEO - PRO AUDIO
SHM 22 PF
3” Desk or Ceiling Mounted Condenser
Gooseneck Microphone
Designed for conference table or ceiling mounting, the unobtrusively
designed SHM 22 PF is a flexible gooseneck microphone ideal for
corporate conferences, distance learning, and tele/video conferencing.
It has a low profile that is preferable to longer goosenecks for
aesthetic reasons, while solving the problems created by boundary
microphones in situations where a boundary mic may be accidentally
covered. Designed for high-quality speech reproduction, it has a
cardioid polar pattern to provide high gain-before-feedback, and a
flat, wide range frequency response. Has an in-line preamplifier with
male standard XLR output.
SHM 22 PF (BESHM22PF): 3” flexible gooseneck terminating in a 3-pin Switchcraft TQG
female connector allowing for flush mounting to a table surface ....................................262.50
www.bhphotovideo.com
WIRED MICROPHONES
CO U N T RYM A N
597
ISOMAX SERIES
ISOMAX 4
Podium Microphones
ISOMAX 4 podium microphones deliver outstanding performance on a lectern, pulpit,
board table or witness stand. It features Active Vibration Isolation—so no shock mounts are
needed! It is available in three lengths, two colors, three polar patterns and a choice of the
location of the flexible sections. It includes a windscreen and a storage tube.
RIGID MICROPHONE
FLEXIBLE ON BOTTOM
FLEXIBLE ON TOP
HYPERCARDIOID
HYPERCARDIOID
HYPERCARDIOID
FLEXIBLE ON BOTH ENDS
HYPERCARDIOID
Black: 12” (COI4H12RB), 18” (COI4H18RB)
and 24” (COI4H24RB) .....................316.95
Black: 12” (COI4H12BB), 18” (COI4H18BB)
and 24” (COI4H24BB) .....................316.95
Black: 12” (COI4H12TB), 18” (COI4H18TB)
and 24” (COI4H24TB) .....................316.95
Black: 12” (COI4H12EB), 18” (COI4H18EB)
and 24” (COI4H24EB) .....................316.95
White: 12” (COI4H12RW),18” (COI4H18RW)
and 24” (COI4H24RW) ...................335.95
White: 12” (COI4H12BW),18” (COI4H18BW)
and 24” (COI4H24BW) ...................335.95
White: 12” (COI4H12TW),18” (COI4H18TW)
and 24” (COI4H24TW) ...................335.95
White: 12” (COI4H12EW),18” (COI4H18EW)
and 24” (COI4H24EW) ...................335.95
CARDIOID
CARDIOID
CARDIOID
CARDIOID
Black: 12” (COI4C12RB),18” (COI4C18RB)
and 24” (COI4C24RB) .....................316.95
Black: 12” (COI4C12BB),18” (COI4C18BB)
and 24” (COI4C24BB) .....................316.95
Black: 12” (COI4C12TB),18” (COI4C18TB)
and 24” (COI4C24TB)......................316.95
Black: 12” (COI4C12EB),18” (COI4C18EB)
and 24” (COI4C24EB)......................316.95
White: 12” (COI4C12RW),18” (COI4C18RW)
and 24” (COI4C24RW) ...................335.95
White: 12” (COI4C12BW),18” (COI4C18BW)
and 24” (COI4C24BW) ...................335.95
White: 12” (COI4C12TW),18” (COI4C18TW)
and 24” (COI4C24TW) ...................335.95
White: 12” (COI4C12EW),18” (COI4C18EW)
and 24” (COI4C24EW)....................335.95
OMNIDIRECTIONAL
OMNIDIRECTIONAL
OMNIDIRECTIONAL
OMNIDIRECTIONAL
Black: 12” (COI4O12RB),18” (COI4O18RB)
and 24” (COI4O24RB) .....................316.95
Black: 12” (COI4O12BB),18” (COI4O18BB)
and 24” (COI4O24BB) .....................316.95
Black: 12” (COI4O12TB),18” (COI4O18TB)
and 24” (COI4O24TB) .....................316.95
Black: 12” (COI4O12EB),18” (COI4O18EB)
and 24” (COI4O24EB) .....................316.95
White: 12” (COI4O12RW),18” (COI4O18RW)
and 24” (COI4O24RW) ...................335.95
White: 12” (COI4O12BW),18” (COI4O18BW)
and 24” (COI4O24BW) ...................335.95
White: 12” (COI4O12TW),18” (COI4O18TW)
and 24” (COI4O24TW) ...................335.95
White: 12” (COI4O12EW),18” (COI4O18EW)
and 24” (COI4O24EW) ...................335.95
ISOMAX 2 Choir Microphones
Designed for hanging over the choir, stage or audience, Countryman’s high-quality ISOMAX 2
choir microphones are so small you don’t notice them. They feature unusually uniform pickup
over an entire production, and use special cables that won’t twist with temperature changes.
Precision directional patterns are uniform with frequency. Available in two colors and three polar
patterns, it is supplied with windscreen, stiffener for hanging and phantom-powered preamplifier.
ISOMAX 2 Hypercardioid
Available in Black (COCMHCB) and
White (COCMHCW) ..........................212.50
ISOMAX 2 Cardioid
Available in Black (COCMCB) and White
(COCMCW) ..........................................212.50
ISOMAX 2 Omnidirectional
Available in Black (COCMOB) and White
(COCMOW) .........................................212.50
ISOMAX DBM Boundary Microphones
Use as a floor mic or podium or table mic, the ISOMAX DBM provides better reach with more
uniform gain over a larger area of stage. More gain before feedback with less audience feedback.
Includes cable reel, adjustable stage mounting plate and phantom-powered preamplifier.
ISOMAX DBM Stage Microphone with a Pre-Amplifier (COSM).............................................................................................219.95
(212) 444-6605 • 1-800-947-9905 • Quick Dial 91
PHOTO - VIDEO - PRO AUDIO
598
WIRED MICROPHONES
CO U N T RYM A N
B3
Broadway Series Lavalier Microphone
The B3 is a very small, round, omnidirectional electret microphone specially-equipped
to withstand moisture and makeup when placed in the hair or on the body. It will even
survive an overnight bath in your favorite cola beverage. Extremely small, the B3 looks
great when you want to see it, hides easily when you don’t. Hide it
in hair of actors, news anchors and lecturers. Ideal for use in
churches, schools and general lavalier applications, the B3 features
up to 150dB SPL on 48v phantom power, has field-selectable
high-frequency response, and with Kevlar reinforced cable and an ultra thin diaphragm, sets a new
standard for low handling noise. Available in five colors (Black, White, Light Beige, Cocoa, Gray).
◆ Excellent choice for hair miking in theater
work. Features include moisture resistance,
small size, and flat frequency response.
◆ The protective cap on the B3 is easily
removed for cleaning or replacement when
clogged with makeup.
◆ Includes tie clip, wind screen, belt clip for
connector and two high-frequency response
control protective caps.
OPTIONAL ACCESSORIES FOR THE B3 AND B6:
Single Tie Clip (COB[ ]STCB[ ]).......................9.95
Double Tie Clip (COB[ ]DTC[ ]) ...................16.50
Magnetic Clip (COB[ ]MAC[ ]) .....................12.95
Viper Clip (COB[ ]VC[ ]) ...................................9.95
Windscreen (COB[ ]WS[ ]) ..............................5.95
Protective Cap (COB[ ]PC[ ])..........................7.50
B6 Incredibly Tiny Lavalier Microphone
Only one tenth of an inch (2.5mm) in diameter, the B6 is smaller than the cable of
other lavalier microphones, yet out performs microphones many times it’s size. The
B6 is effectively hidden when it’s in plain sight. For example choose a protective cap
near the color of a shirt and poke the B6 out through a button hole. Tape the cable to
the back of the shirt to secure it and your done. Say goodbye to the hassle and
degraded sound quality you get burying mics under clothing! Hide it in hair or glue
on the faces of actors, news anchors and lecturers. It is designed to survive.
Highly resistant to moisture, makeup and other hazards found in a production
environment, the B6 will even survive an overnight soak in your favorite cola
beverage. The outer screen in the B6’s replaceable cap stops makeup and sweat
before it enters the mike element. If it clogs, simply remove the cap for cleaning or replacement. The B6 includes a tie clip,
wind screen, belt clip for connector and a set of three high frequency protective caps so you can match your application.
B3
PHOTO - VIDEO - PRO AUDIO
B6
www.bhphotovideo.com
WIRED MICROPHONES
CO U N T RYM A N
599
EMW
Square Omnidirectional
Lavalier Microphone
The Countryman EMW is a multi-purpose lavalier microphone designed for churches,
schools, interviews, news etc. It features an
omni-directional polar pattern, yielding an
even frequency and signal response at the
direct and indirect sections of the microphone.
It features a wide 20Hz to 20kHz frequency
response, and is also available in flat
(instrument miking, shelved (normal lavalier
use) and peaked (for use behind clothing)
frequency response curves. It is highly water resistant and is available in five colors
(Black, White, Light Beige, Cocoa, Gray). It includes a viper grip clip, a tie clip, a
wind screen and a soft case.
MICROPHONES FOR WIRELESS
Manufacturer
AKG
Audio-Technica
Mic System
Connector Type
B3 Omni Lav Mic
B6 Omni Lav Mic
EMW
PT40, 60, 61, 80, 8, 2000, 4000
Switchcraft TA3F
B3W[ ]FF05[ ]AK
B6W[ ]FF05[ ]AK
MEMW[ ]05[ ]AK
PT51, 300, 900
B-LOC (3.5mm)
B3W[ ]FF05[ ]AG
B6W[ ]FF05[ ]AG
MEMW[ ]05[ ]AG
T27, 31, 51, 210 ,310, 3000
Hirose 4-pin
B3W[ ]FF05[ ]AP
B6W[ ]FF05[ ]AP
MEMW[ ]05[ ]AT
T35, 75, 211, 601, 1000
Hirose 4-pin
B3W[ ]FF05[ ]AW
B6W[ ]FF05[ ]AW
MEMW[ ]05[ ]AN
Azden
41BT (UHF)
Hirose 4-pin
B3W[ ]FF05[ ]ZU
B6W[ ]FF05[ ]ZU
MEMW[ ]05[ ]ZU
Beyer
TS170, 170p, 190
Lemo “S” 4pin
B3W[ ]FF05[ ]BS
B6W[ ]FF05[ ]BS
MEMW[ ]05[ ]BS
Lectrosonics
M170, 175
Switchcraft 851
B3W[ ]FF05[ ]L2
B6W[ ]FF05[ ]L2
MEMW[ ]05[ ]L2
U100, 190, 195, 200, 300, M185
Switchcraft TA5F
B3W[ ]FF05[ ]LS
B6W[ ]FF05[ ]LS
MEMW[ ]05[ ]LS
M187, UM190, 195, 200, 250, 300
Switchcraft TA5F
B3W[ ]FF05[ ]LX
B6W[ ]FF05[ ]LX
MEMW[ ]05[ ]LS
Nady
Samson
Sennheiser
Lemo 4-pin
B3W4FF05[ ]NL
B6W4FF05[ ]NL
MEMWF05[ ]NL
Switchcraft TA3F
B3W4FF05[ ]NS
B6W4FF05[ ]NS
MEMWF05[ ]NS
UT5, TX3 (Black)
Hirose 6-pin
B3W[ ]FF05[ ]SA (X)
B6W[ ]FF05[ ]SA (X)
MEMW[ ]05[ ]SX
CT3, VT2L
Switchcraft TA3F
B3W[ ]FF05[ ]SV
B6W[ ]FF05[ ]SV
MEMW[ ]05[ ]SV
SK2012
Microdot
B3W[ ]FF05[ ]SE
B6W[ ]FF05[ ]SE
MEMW[ ]05[ ]SE
SK-50, SK250
Lemo 3-pin
B3W[ ]FF05[ ]S3
B6W[ ]FF05[ ]S3
MEMW[ ]05[ ]S3
BF1083
Lemo 1-pin
B3W[ ]FF05[ ]S1
B6W[ ]FF05[ ]S1
MEMW[ ]05[ ]S1
SK 1093 digital
3.5mm locking plug
B3W[ ]FF05[ ]SD
B6W[ ]FF05[ ]SD
MEMW[ ]05[ ]SD
Evolution Series EW100, 300, 500
3.5mm locking plug
B3W[ ]FF05[ ]SR
B6W[ ]FF05[ ]SR
MEMW[ ]05[ ]SR
Shure
L-1, L-11, LX1, SC1, U1, T1
Switchcraft TA4F
B3W[ ]FF05[ ]SL
B6W[ ]FF05[ ]SL
MEMW[ ]05[ ]SL
U1L
Lemo 4-pin
B3W[ ]FF05[ ]SU
B6W[ ]FF05[ ]SU
MEMW[ ]05[ ]SU
Sony
WRT-28, 420, 820
Twist-lock type 4-pin
EB3W[ ]FF05[ ]SO
B6W[ ]FF05[ ]SO
MEMW[ ]05[ ]SO
WRT822, WRT8B
Twist lock type 4 pin
B3W[ ]FF05[ ]SY
B6W[ ]FF05[ ]SY
MEMW[ ]05[ ]SY
WRT-805, URX-B1
3.5mm locking plug
B3W[ ]FF05[ ]SN
B6W[ ]FF05[ ]SN
MEMW[ ]05[ ]SN
If your wireless system is not listed here, give us a call or check our website for additional models (many more are available). When ordering, please specify desired color and microphone sensitivity.
(212) 444-6605 • 1-800-947-9905 • Quick Dial 91
PHOTO - VIDEO - PRO AUDIO
600
WIRED MICROPHONES
CO U N T RYM A N
E6i EARSET
Ultra Light Headset Microphones
The E6i EarSet microphone is a world-class vocal mic so unobtrusive it’s barely seen as it
delivers high quality voice pickup, while rejecting surrounding noise and feedback.
Ideal for clergy, performers, trade show presenters, auctioneers, teachers and lecturers,
and ultra-miniature electret condenser element is held close to the mouth by a thin boom
and comfortable earclip. The entire assembly weighs less 0.2 oz. and virtually disappears
against the skin, so performers forget they’re even wearing a mic. The omnidirectional
element is nearly immune to wind and breath pops, even when used without a windscreen, while the boom keeps it very close to the mouth for excellent isolation. Light and
springy, the E6i clips around the ear, not the head so it doesn’t interfere with hairstyles,
headphones or hats. Available in Light Beige, Tan, Cocoa and Black colors.
F E AT U R E S
◆ The industry’s smallest, lightest and least
◆ Clips directly to your ear. No conflict with
hairstyles. No adjustment needed for the
width of your head. The cable attaches with
a quick connect connector for easy service.
visible headworn microphones.
◆
Sounds like a world-class, full-size performance microphone—frequency response is
better than 20Hz to 20 kHz and dynamic
range is over 100dB dynamic range—but
hands-free, and the performer has complete
freedom of movement.
◆
The E6i is exceptionally resistant to makeup,
sweat and moisture when used with the
supplied protective caps. Caps and cable
are field-replaceable without tools.
◆ Offers inexpensive cable replacement. With
other mics a worn cable requires purchasing
a completely new mic. But with the E6i you
can buy a replacement cable in advance and
easily replace it in less than a minute.
◆ Stainless steel, skin-colored almost
unbreakable boom can be bent and re-bent
many times to fit different performers.
◆ Extremely versatile,
the soft, highly
flexible boom is
easily shaped right
on your face.
◆ Changeable
protective caps let
you shape the
frequency response
for different situations or to match
other microphones.
Omni and Uni-Directional Versions
E6i EarSets are available in omni and directional versions, giving the user some exceptional
advantages. Very user-friendly for new and experienced users alike, the omni EarSet rejects
unwanted sound and reduces feedback in meeting rooms or houses of worship, better than a
lavalier almost any way you wear it (an average of 12dB compared to an omnidirectional
lavalier). For situations where there are loud monitors, extreme feedback or environmental
noise, choose the directional EarSet. It’s much smaller and less obtrusive compared to anything
else on the market.
Each mic is supplied with three response-adjusting protective caps, storage case, windscreen,
collar clips and positioning instructions. XLR models also include a belt clip. They are powered by
the wireless transmitter or via 9-48v phantom power.
◆ For use with most wireless transmitters or
Mic Options
hard-wired phantom power with adapter.
◆
◆
Includes easily-hidden,
quick-connect
miniature 1mm, or
optional heavy-duty
2mm cables. Cables
are available for
almost any wireless
transmitter or
phantom mic input
providing 3 - 48v.
◆ Available in four colors (light beige, tan, cocoa and black), with tan being the most popular. You
Different versions available for speaking or
singing with up to 140dB SPL capability.
PHOTO - VIDEO - PRO AUDIO
can also choose a separate color for the cable.
◆ The earsets are a available in three sensitivities for different performance styles:
E6OW5 (for general speaking and vocals)
Sensitivity: 6.0 mV/Pascal; 125 dB SPL
E6DW5 (normal conversational levels)
Sensitivity: 7.0 mV/Pascal; 125 dB SPL
E6OW6 (for powerful speaking and vocals)
Sensitivity: 1.9 mV/Pascal; 135 dB SPL
E6DW6 (projected voices, sermons)
Sensitivity: 2.0 mV/Pasca; 135 dB SPL
Model E6OW7 (for very powerful vocals)
Sensitivity: 0.6 mV/Pascal; 145 dB SPL
E6DW7 (very loud voices, monitor levels)
Sensitivity: 0.7 mV/Pascal; 145 dB SPL
www.bhphotovideo.com
WIRED MICROPHONES
CO U N T RYM A N
601
ISOMAX HEADSET MICROPHONE
The Isomax Headset Microphone consists of a headband and a boom
mike. The headband is a telescoping band of tubing that fits around
the back of the head like a backwards pair of glasses allowing it to be
easily concealed under the wearer's hair. The boom mike telescopes
and can be bent to provide a custom fit. Available with cardioid or
hypercardioid polar pattern in black or light skin tone colors.
◆ The headband fits around the back of your head for minimum visibility. It has a
telescopic, adjustable mini-mike boom. Designed to have a snug, comfortable fit.
◆ Wide 20Hz to 20kHz response shaped like the worlds most popular vocal micro-
phone. Not at all like a communications type headset. Truly dynamic warmth with
condenser clarity.
◆ Handles high sound levels up to 150dB SP.
◆ Special versions available for direct powering from most wireless transmitters.
Phantom powered version has pop free switch and belt clip built into the connector.
◆ Nearly perfect cardioid and hypercardioid patterns handle hot monitors better than
most handhelds.
MICROPHONES FOR WIRELESS
Manufacturer
Mic System
Connector Type
PT40, 60, 61, 80, 8, 2000, 4000
Switchcraft TA3F
E6OW[ ][ ]AK
E6DW[ ][ ]AK
M2[ ]W3HH05AK
PT51, 300, 900
B-LOC (3.5mm)
E6OW[ ][ ]AG
E6DW[ ]FF05[ ]AG
M2[ ]W3HH05AG
T27, 31, 51, 210 ,310, 3000
Hirose 4-pin
E6OW[ ][ ]AT
E6DW[ ]FF05[ ]AP
M2[ ]W5FF05AT
T35, 75, 211, 601, 1000
Hirose 4-pin
E6OW[ ][ ]AN
E6DW[ ]FF05[ ]AW
M2[ ]W5FF05AV
Azden
41BT (UHF)
Hirose 4-pin
E6OW[ ][ ]ZU
E6DW[ ]FF05[ ]ZU
M2[ ]W5FF05ZU
Beyer
TS170, 170p, 190
Lemo “S” 4pin
E6OW[ ][ ]BS
E6DW[ ]FF05[ ]BS
M2[ ]W5FF05BS
M170, 175
Switchcraft 851
E6OW[ ][ ]L2
E6DW[ ]FF05[ ]L2
M2[ ]W4FF05L2
AKG
Audio-Technica
Lectrosonics
Sennheiser
Shure
Sony
E6i Uni
ISOMAX Headset
U100, 190, 195, 200, 300, M185
Switchcraft TA5F
E6OW[ ][ ]LS
E6DW[ ]FF05[ ]LS
M2[ ]W5FF05LS
M187, UM190, 195, 200, 250, 300
Switchcraft TA5F
E6OW[ ][ ]LS
E6DW[ ]FF05[ ]LX
M2[ ]W5FF05LS
Lemo 4-pin
E6IOW5[ ]NL
Nady
Samson
E6i Omni
MHHW5HH05[ ]NL
Switchcraft TA3F
E6IOW5[ ]NS
UT5, TX3 (Black)
Hirose 6-pin
E6OW[ ][ ]SX
E6DW[ ][ ]SX
MHHW5HH05[ ]NS
M2[ ]W5FF05SX
CT3, VT2L
Switchcraft TA3F
E6OW[ ][ ]SV
E6DW[ ]FF05[ ]SV
M2[ ]W5FF05SV
SK2012
Microdot
E6OW[ ][ ]SE
E6DW[ ]FF05[ ]SE
M2[ ]W3FF05SE
SK-50, SK250
Lemo 3-pin
E6OW[ ][ ]S3
E6DW[ ]FF05[ ]S3
M2[ ]W3FF05S3
BF1083
Lemo 1-pin
E6OW[ ][ ]S1
E6DW[ ]FF05[ ]S1
M2[ ]W3FF05S1
SK 1093 digital
3.5mm locking plug
E6OW[ ][ ]SD
E6DW[ ]FF05[ ]SD
M2[ ]W3FF05SD
Evolution Series EW100, 300, 500
3.5mm locking plug
E6OW[ ][ ]SR
E6DW[ ]FF05[ ]SR
M2[ ]W5FF05SR
L-1, L-11, LX1, SC1, U1, T1
Switchcraft TA4F
E6OW[ ][ ]SL
E6DW[ ]FF05[ ]SL
M2[ ]W5FF05SL
U1L
Lemo 4-pin
E6OW[ ][ ]SU
E6DW[ ]FF05[ ]SU
M2[ ]W5FF05SU
WRT-28, 420, 820
Twist-lock type 4-pin
E6OW[ ][ ]SO
E6DW[ ]FF05[ ]SO
M2[ ]W5FF05SO
WRT822, WRT8B
Twist lock type 4 pin
E6OW[ ][ ]SY
E6DW[ ]FF05[ ]SY
M2[ ]W5FF05SY
WRT-805, URX-B1
3.5mm locking plug
E6OW[ ][ ]SN
E6DW[ ]FF05[ ]SN
M2[ ]W5FF05SN
If your wireless system is not listed here, give us a call or check our website for additional models (many more are available). When ordering, please specify desired color and microphone sensitivity.
(212) 444-6605 • 1-800-947-9905 • Quick Dial 91
PHOTO - VIDEO - PRO AUDIO
602
WIRED MICROPHONES
CROWN
MB SERIES
Mini-Boundary Microphone System
With their incredibly small size, the MB Series offers a wide range of options
and flexibility—making boardroom installations much easier. Using
miniature, low-profile designs, these mini-boundary,
supercardioid mics virtually disappear when installed, yet provide the
same great sound as Crown’s highly-acclaimed PCC microphone series
at a substantial savings compared to traditional microphones.
Designed with the help of leading audio consultants and contractors, the
MB Series is a comprehensive system of microphones and electronics that’s
perfect for a wide range of applications. Comprised of five microphones—
three that work with the innovative MB-100 and MB-200 interfaces and
two that operate in a traditional stand-alone manner—the MB System lets you mix and match microphones as needed
for multiple configurations.
Designed to accommodate up to four microphones, the MB interfaces provide four separate inputs, outputs and
programmable switching connections. With easy-hookup Phoenix connectors and a low profile, the MB interface mounts
quickly and conveniently beneath a tabletop. All MB System microphones feature a surface-mounted supercardioid capsule for extended reach and clarity and a built-in red LED that illuminates when the microphone is active.
The MB-1, MB-2, MB-3 and MB-4 are each designed for multi-miking applications such as teleconferencing, distance
learning, boardrooms, and courtrooms. The MB-3 can also be used for surveillance in security applications, and the MB-4
in TV or theatrical applications.
F E AT U R E S
◆ Removable grille assembly can be
painted
◆ Remote sensing of switch closure
(in MB-200)
◆ A common interface for up to four
mics reduces the size and cost of
the system
◆ Electret condenser mic elements
deliver clean, clear, natural sound
◆ Low-Z balanced output prevents
hum and high-frequency loss
◆ On/off switches can be added
◆ Switches can be internally pro-
grammed for touch-on/touch-off,
momentary on, or momentary off
(not on MB-3)
◆ Defeatable LED (not on MB-3)
M B S Y S T E M E L E C T R O N I C S I N T E R FA C E
The MB-100 and MB-200 are
electronic interfaces that power up to
four Crown mini-boundary MB-1,
MB-2, or MB-4/E microphones.
Interfacing up to four mics reduces
the size and cost of the mic system
and reduces installation time.
The MB-100 provides programmable
switching to turn the mic on or off if
desired (switches not provided). The MB-200 is the same plus it also has remote switch sensing
via an optical coupler.
Two microphones can be wired to each pluggable terminal block, which plugs into the MB-100
or MB-200. Pluggable terminal blocks are also provided for the balanced outputs on the
interface, and for remote switch sensing. They are powered by 18 to 48v phantom power from
a mixer or a phantom power supply.
◆ Powers and equalizes up to four mics
◆ Provides balanced outputs from the
interface
◆ Common interface for up to four microphones
reduces the size and cost of the system
◆ Pluggable microphone inputs
◆ They operate on 12-48v DC
phantom power
MB-100 (CRMB100) ........................................265.95
◆ Three year warranty
PHOTO - VIDEO - PRO AUDIO
www.bhphotovideo.com
MB-200 (CRMB200) ......................................354.95
WIRED MICROPHONES
CROWN
603
MB SERIES
MB-1
MB-2
MB-3
MB-4/MB-4E
Removable
Aluminum Insert
Removable
Phone Jack
Built-in
Electronics
For Temporary
Installations
The tiny MB-2 (less than 1 x 11⁄2”)
is a removable low-profile
rectangular mic featuring a 1/4”
stereo phone plug for quick
insertion and removal from a
standard contractor-supplied
jack (Switchcraft 152B Thick
Panel Phone Jack or equivalent).
A locating pin (removable)
prevents the microphone from
being rotated.
A stand-alone unit with a built-in
electronics package, the lowprofile MB-3 mounts easily into
tabletops, lecterns, walls or ceilings for permanent installation.
The MB-4 is a mini rectangular
microphone for stand-alone use.
A power module with an
attached 15’ XLR cable has all the
required mic electronics built-in.
The mic is powered by 12-48v
DC phantom power, and is
low-impedance balanced. The
cable may be positioned to exit
either the bottom or rear of the
microphone.
A low-profile circular microphone
just 1.3˝ wide, the MB-1 features a
bottom-mounted 1/4” stereo
phone plug for quick insertion
and removal from the supplied
table insert.
A table insert with a phone jack
that accepts the mic is included.
Featuring a black anodized
aluminum finish, the insert
flush-mounts in a hole drilled in
the table. It can be permanently
installed, and includes a black
dust cap for use after meetings
when the mic is removed.
Thanks to its supercardioid
pickup pattern, the MB-1 greatly
reduces ambient noise and
pickup of room reverberation. The
result is a clearer sound.
In combination with an MB-100
or MB-200 Interface, the MB-1 can
be programmed for multiple
switching functions.
Available in black anodized
(MB-1), solid brass (MB-1BR) and
paintable aluminum (MB-1AL)
finishes.
Thanks to its supercardioid
pickup pattern, the MB-2 greatly
reduces ambient noise and
pickup of room reverberation.
The MB-2 features multiple
switching modes when used
with an MB Interface.
On the bottom of the mic is a
tubular power module with a
3-pin XLR-type output
connector. It is powered by
12-48v phantom power, and has
a low-impedance balanced
mic-level output.
Thanks to its supercardioid
pickup pattern, the MB-3 greatly
reduces ambient noise and
pickup of room reverberation.
The result is a clearer, more
intelligible sound.
MB-1 Table Top Boundary Mic: Available in Black (CRMB1Q), Brass
(CRMB1BR) and Aluminum (CRMB1AL) finishes...........................................123.95
MB-2 Table Top Boundary Mic (CRMB2Q) ............................................105.95
MB-3 Surface-Mount Boundary Mic (CRMB3Q) ................................168.95
MB-4 Boundary Mic (CRMB4Q): With a standard XLR output........105.95
MB-4E Boundary Mic (CRMB4E): Same as the MB-4 with an
unterminated “pig-tail” connection........................................................105.95
Double-sided sticky tape is
provided for attaching the unit
under shelves, on walls, etc.
Thanks to its supercardioid
pickup pattern, the MB-4 greatly
reduces ambient noise and
pickup of room reverberation.
The result is a clearer sound.
The MB-4 is also available in
a pigtail version. The MB-4E is
the same, but without the
electronics connector. Its cable
fits through a small hole in the
mounting surface and is intended
for use with the MB Interfaces.
(Must be used with the MB-100
or MB-200).
M B S E R I E S S P E C I F I C AT I O N S
Frequency Response
Sensitivity
Impedance
Polar Pattern
50 Hz to 15 kHz
22 mV/Pa
50 ohms
Half-Supercardioid
(212) 444-6605 • 1-800-947-9905 • Quick Dial 91
PHOTO - VIDEO - PRO AUDIO
604
WIRED MICROPHONES
CROWN
PCC SERIES
Phase Coherent Cardioid Microphones
for Stage Floor, Altar Tables, Boardrooms and Teleconferencing
Crown’s PCC (Phase Coherent Cardioid) Series microphones offer exceptional acoustic performance in handsome,
low-profile enclosures. Designed for high-end theatrical work, the PCC Series has become the standard for stage miking
applications. These mics also provide an elegant solution for discrete multi-mic applications, such as lecterns and
boardroom tables as well as altar, teleconferencing and distance-learning applications.
Each mic employs Crown’s Phase Coherent Cardioid boundary mic technology to provide impressive gain before
feedback and directional pickup without sacrificing tonal quality. This results in microphones with a wide, smooth
frequency response, free of phase interference from surface sound reflections. Designed to withstand the rigors of the
stage, each microphone has been finely crafted using the very best materials while maintaining affordability. Their
low profile enables them to be placed inconspicuously on the stage floor, on a lectern, or any other appropriate surface.
Flexibility is further enhanced by a membrane switch control option for boardroom and podium applications. This
unique, silent operating switch can be configured three ways: touch on/off, momentary on, or momentary off operation.
F E AT U R E S
◆
◆
◆
They are surface-mounted miniature
cardioid microphone of professional quality.
Handsomely styled, they are appropriate
for use on the most elegant boardroom
table or lectern. Other applications include
churches, courtrooms and teleconferencing
By mounting a small-diameter mic capsule
very near a surface or boundary, direct and
reflected sound waves arrive at the mic
in-phase. This increases sensitivity 6 dB and
ensures phase coherency up to the highest
frequencies in the audible spectrum
resulting in a wide, smooth frequency
response free of phase interference. Clarity
and reach are also enhanced
Electret-condenser capsules provides a
wide, smooth frequency response from
50Hz to 20kHz. RFI suppression is included.
Self-noise is low and sensitivity is very high
◆
◆
Capable of withstanding up to 120 dB
SPL without distortion, they will never
overload in practical use
All include three-position (Flat, Cut and
Boost) bass-tilt switch on the bottom of the
microphones allows you to tailor the
low-end frequency response for particular
applications. On the bottom of the mics are
a three-position switch allowing you to
adjust low-frequency response:
— The FLAT position provides a flat
low-frequency response, for normal
usage. They are shipped from the factory
in flat position
— The CUT position rolls off the bass,useful in
noisy or boomy surroundings
— The BOOST position boosts the bass for a
more natural sound when the mic is used
on a small surface such as a lectern
All except the PCC-160 are
available with a 1/4” stereo
phone plug on the
bottom of the base
plate instead of a cable. They
have the suffix “SPP” added to
the model number. For example,
PCC-130SPP or PCC-170SW/SPP.
PHOTO - VIDEO - PRO AUDIO
www.bhphotovideo.com
◆ Self-contained electronics eliminate the
need for an in-line preamp. Powered by
12-48v DC phantom power, they have a
low-impedance balanced output which
permits long cable runs without hum
pickup or high-frequency loss.
◆ They use a Switchcraft TB3M mini-XLR as
their standard connection. In addition, all
except the PCC-160 can be ordered with a
1/4” stereo phone plug on the bottom of
the base plate (they have the suffix “SPP”
added to the model number)
◆ All mics (except SPP versions) include a
black 15’ cable with Switchcraft TA3F (mic
end) and an XLR-M connector (output).
◆
Because of their highly directional pickup
pattern, they minimize background noise
and feedback.
◆
Permanent mounting is enabled by screw
holes in the base
◆
Engineering attention-to-detail assures
years of reliable use.
◆
All except the PCC-160 (all steel construction)
are made of high-impact molded plastics
and steel mesh grille.
◆
They each include a three-year warranty.
◆
All mics are available in an off-white
version to blend with church altars or any
situation where a lighter color is called for.
WIRED MICROPHONES
CROWN
605
PCC SERIES
PCC-130/130W
PCC-130SW
Mighty Mini Boundary
Mighty Mini Boundary
Sometimes, unobtrusive just isn’t
enough. Enter the PCC-130, featuring
exceptional performance with the
appearance of the PCC-170 in a
package only about half the size.
When the situation simply demands
that a mic be heard but not seen, the
PCC-130 with its small size, gives you
an obvious choice. Its cardioid
pattern reduces background noise,
reverb, and feedback.
Same as the PCC-130, the PCC-130SW
also offers a membrane switch
control option. This makes it ideal
for multiple-microphone use on a
conference table where each person
wants control of his or her
microphone. A bottom-mounted
slide switch configures the silentoperating membrane switch for touch on/off, momentary on or
momentary off. A high-intensity LED lights when the unit is on. In
the off position, the mic is attenuated 70 dB.
PCC-130: Available in Black (CRPCC130) and White (CRPCC130W) ............239.50
PCC-130SW (CRPCC130SW): With XLR connection ..............................265.95
PCC-130SPP: Base-mounted, 1/4” stereo phone plug version. Available in
Black (CRPCC130SPP) and White (CRPCC130WSPP) .............................................239.50
PCC-130SWSP (CRPCC130SWSP)
Same as the PCC-130SW, but with a 1/4” stereo phone-plug .....265.95
PCC-160/160W
Industry-Standard Boundary Mic
Long recognized as an industry-standard stage-floor microphone, the supercardioid PCC-160 is
also great for lecterns, conference tables and news desks—anywhere maximum gain and
articulation are essential. Thanks to its low profile and black finish, the microphone becomes
almost invisible in use. A side-mounted connector complements the form factor of the PCC-160,
allowing the unit to be placed effectively at the stage edge, at the top of a lectern or in other
tight spots. If desired, the cable can be hard-wired for bottom entry. The heavy-gauge, all steel
body protects the unit from abuse. Available in off-white finish (PCC-160W) for blending with
church altars and other surroundings where a lighter color is appropriate.
PCC-160 (CRPCC160): Black finish..................284.50
PCC-160W (CRPCC160W): White finish.........283.95
PCC-170/170W
PCC-170SW
The Elegant Boundary
The Elegant Boundary
A larger, more elegant version
of the PCC-130, the PCC-170
features a frequency response
carefully tailored to create extremely
natural voice reproduction. Equally
adept in the boardroom, at the
lectern, or for teleconferencing.
Available in off-white finish for
surroundings where a lighter color
is appropriate.
The PCC-170SW is the same as the
PCC-170, plus it also offers a
membrane switch control option.
This is ideal for multiple-mic use on
a conference table where each
person wants control of his or her microphone. A bottom-mounted
DIP switch configures the membrane switch for touch on/off,
momentary on or momentary off. A high-intensity LED lights when
the unit is on. In the off position, the mic is attenuated 70dB.
PCC-170: Available in Black (CRPCC170) and White (CRPCC170W) ............257.95
PCC-170SWSP (CRPCC170SWSP): With 1/4” stereo phone-plug.......274.95
PCC-170SPP: Base-mounted, 1/4” stereo phone plug version. Available in
Black (CRPCC170SPP) and White (CRPCC170WSPP) .............................................257.95
PCC-170SWO (CRPCC170SWO): Includes all the features of the
PCC-170SW, and adds remote sensing of the switch closure.......319.95
PCC-170SW (CRPCC170SW): With XLR connection ...............................274.95
(212) 444-6605 • 1-800-947-9905 • Quick Dial 91
PHOTO - VIDEO - PRO AUDIO
606
WIRED MICROPHONES
CROWN
LM SERIES
Lectern Microphones
for Schools, Government, Boardrooms, and Houses of Worship
Crown’s LM (lectern microphones) Series is designed to provide clear,
precise vocal reproduction with superior noise rejection in an elegant,
functional package. Simple installation and stylish looks complement any lectern
application, from the corporate boardroom to the bully pulpit, while their durable
high-quality design provide years of consistent, reliable performance. Featuring a
supercardioid element, they virtually eliminate the potential for undesirable noise to
enter the system, even at high gain levels. Performance is further enhanced by
specially designed pop filters that effectively reduce explosive breath sounds. Add
their silent-operating gooseneck and shock mount designs, and you understand why
LM Series microphones are so easy to position and use. Designed for the most demanding applications, they are
manufactured with top-quality materials and feature reinforced joints and connections. Each microphone is individually
tested to ensure perfect performance out of the box.
LM-201
LM-201
LM-300A/300AL
Supercardioid Condenser
Lectern Microphones
Supercardioid Condenser Dual Gooseneck Lectern Microphones
Slim, rugged and unobtrusive, the LM-201 is a
professional-quality, supercardioid condenser
microphone with a 16” arm, that is ideal for
legislature, city council and other demanding
lectern applications. It easily installs with the
included mounting screws. When swiveled to
the desired position, adjustment is far quieter
than conventional gooseneck microphones.
◆ Rugged and is built to withstand daily use.
◆ Ball-and-socket joint combines with a
rugged mic arm to provide quiet, long-term
operation.
◆ Wire-screen grille with two-stage pop filter
reduces pickup of explosive breath sounds.
No matter the situation, the elegant LM-300A,
LM-300AL and LM-301A can meet the need.
Dual-gooseneck microphones for lecterns,
pulpits, or similar applications, each is a
professional-quality, electret-condenser mic
with superb supercardioid performance and
noise rejection. Explosive breath sounds are
effectively reduced with the supplied foam
2-stage pop filter, while a flat/low-cut switch
further reduces breath pops.
The LM-300A (17 1⁄4”) and the 22” LM-300AL
(extended) plug directly to an XLR female
panel connector. The microphone screws onto
a standard 5/8”-27 thread. Includes LM-SM
shock mount for situations requiring even
more isolation from noise.
◆
An external foam windscreen is supplied for
extra pop rejection or for outdoor use.
LM-300A (CRLM300A): 17 1⁄4” gooseneck.....294.95
◆
The base and mic capsule are shockmounted to attenuate handling noise and
lectern thumps.
LM-301A
◆ Powered by 9-48v DC phantom power
LM-201 Lectern Microphone (CRLM201P)
Black finish .......................................................309.95
LM-201B Lectern Microphone (CRLM201B)
Brown finish.....................................................309.95
PHOTO - VIDEO - PRO AUDIO
LM-300A
LM-301A
LM-300AL (CRLM300AL): 22” gooseneck....299.95
Supercardioid Condenser Miniature Dual Gooseneck Mic
Designed for professional use on lecterns as well as inconspicuous miking of musical instruments,
the LM-301A comes in two parts: microphone cable and a cylindrical electronics housing. The
microphone has a built-in 5/8”-27 threaded collar that can be screwed onto a mic stand, mic
boom or an Atlas AD-12 male flange. Because of the unique design of the mounting collar, the
mic cable can be routed either outside or inside the mounting collar. Includes the LM-301SMA
shock mount adapter for use with the LM-SM shock mount. (CRLM301A) ........................................369.95
www.bhphotovideo.com
WIRED MICROPHONES
EARTHWORKS
607
FLEX SERIES
Gooseneck Mics for Podiums and Choirs
FM-360
FM-500
FM-720
Earthworks Flex Microphones are a dramatic improvement over other gooseneck microphones. Their clean, natural on-axis pickup, and smooth, uncolored
off-axis rejection make them superb for a wide range of applications including
sound reinforcement. In all of them, you will hear the exceptional Earthworks
microphone sound quality that has made them famous (i.e. an extremely
accurate and open sound that is crystal clear). Flex Mics are user friendly and
provide excellent gain before feedback, because there are no severe off-axis
peaks or dips in their response.
For podium use, Flex Mics are spectacular! They capture oration uniformly
across a wide area of the pickup pattern. This greatly improves intelligibility,
especially with inexperienced orators who can be as much as 90° off-axis.
With the Flex Mic, you will still hear them and they will still have the same
excellent sound quality as on-axis, just 2 or 3dB softer. All of this makes the
Flex Mics ideal for crystal clear communications in such venues as churches,
auditoriums, meeting and boardrooms. Once you have experienced the
performance of Earthworks Flex Mics, you will never use anything else for
podiums and similar applications.
FM360
FM500
Don’t let its diminutive size fool you. Although
it is only 13” long, the FM360 is equipped to
dominate in situations which require a very
low profile in order to get it right. It provides
superb intelligibility and sound quality, and is
ideal for a wide range of applications from a
tall lectern to courtroom and tabletops.
Orators will be highly intelligible and you will
have more gain before feedback. Available in
cardioid and hypercardioid.
At 19”, this is just the right length for most
podium and church applications. The FM500’s
swan-like neck can be adjusted with very little
handling noise and it will stay where you put
it. It is a good size to position unobtrusively
into an instrumental ensemble or in front of a
choir for sound reinforcement or recording.
Orators will be highly intelligible and you will
have more gain before feedback. Available in
cardioid and hypercardioid.
AT 27”, the extra-long FM720 is ideal for
applications where extra length in a
gooseneck is required. Totally flexible, it allows
precise positioning with no handling noise.
Orators will be highly intelligible and you will
have more gain before feedback. Available in
cardioid and Hypercardioid.
FM360 (EAFM360): Cardioid..........................449.00
FM360/HC (EAFM360HC): Hypercardioid ..449.00
FM500 (EAFM500): Cardioid..........................449.00
FM500/HC (EAFM500HC): Hypercardioid ..449.00
FM720 (EAFM720): Cardioid..........................449.00
FM720/HC (EAFM720HC): Hypercardioid ..449.00
Polar Pattern
Frequency Response1
2
Signal-to-Noise Ratio
Maximum Input Sound Level
Power Requirements3
FM720
FM360
FM360/HC
FM500
FM500/HC
FM720
FM720/HC
Cardioid
Hypercardioid
Cardioid
Hypercardioid
Cardioid
Hypercardioid
50Hz - 20kHz
50Hz - 20kHz
50Hz - 20kHz
50Hz - 20kHz
50Hz - 20kHz
50Hz - 20kHz
22dB
22dB
22dB
22dB
22dB
22dB
145dB SPL
145dB SPL
145dB SPL
145dB SPL
145dB SPL
145dB SPL
+48v
+48v
+48v
+48v
+48v
+48v
Output Impedance
600 ohms
between pins 2 & 3
600 ohms
between pins 2 & 3
600 ohms
between pins 2 & 3
600 ohms
between pins 2 & 3
600 ohms
between pins 2 & 3
600 ohms
between pins 2 & 3
Output Connectors
3-pin XLR
3-pin XLR
3-pin XLR
3-pin XLR
3-pin XLR
3-pin XLR
Dimensions (Length x Diameter)
13 x .86”
13 x .86”
19 x .86”
19 x .86”
27 x .86”
27 x .86”
1. ±2dB @ 6”
2. SPL Equivalent (A Weighted)
3. Phantom Power
(212) 444-6605 • 1-800-947-9905 • Quick Dial 91
PHOTO - VIDEO - PRO AUDIO
608
WIRED MICROPHONES
E L E C T R O -V O I C E
RE-SERIES
Installation Microphone Series
Using an EV RE-Series microphone is easy and enjoyable for
everyone. The presenter will sound his or her natural best,
without fear of feedback, cut-out, noise or distortion – or of
sounding like a different person when switching microphones.
These miniature electret condenser microphones are available
in podium, hanging, lapel and boundary models. Fixed.
Portable. Omnidirectional. Unidirectional. An EV family of
microphones suitable for many applications and venues.
Each with the same great sensitivity to sound pick-up and a
remarkable clarity and consistency. Even when shifting from one
RE-series mic to another — they have the same frequency response characteristics. No need to remix. It’s all in the family.
But there is more. Streamlined, they blend seamlessly into the architecture. For easy installation and use, the power
module is integrated within each mic — no need to install a separate unit. Yet, the lapel mic is smaller, the hanging mics
more shapely, the podium mics more slender, and the boundary mics lower in profile, than others on the market.
RE90P-12/RE90P-18
RE90H/RE90HW
Unidirectional Podium Microphone
Acoustically designed for high-quality
sound reinforcement and public address
applications, this slim-profile podium mic
picks up and reproduces sound naturally for
either distant or close-up delivery. The
gooseneck, 12” (RE90P-12) or 18˝ (RE90P-18),
can be precisely positioned without
excessive twisting and turning. Small in
diameter, it has two supple joints and a
rigid center tube. The electronics module
is housed in the gooseneck base, which
makes installation and service quick and
easy. The RE90P mounts to a lectern, pulpit,
or podium equipped with the proper
receptacle. Or install with the optional
flange-mount and shock-mount kits.
Unobtrusive, however it is used.
RE90P-12
◆ Small, streamlined appearance
Unidirectional Hanging Microphone
Ideal for choir, instrumental and vocal
groups, and live theatre, this hanging
microphone is so sensitive it catches the
smallest sigh, the softest note. So faithful
to the performance, so natural in
delivery, everyone in the audience can
hear every word. It’s ideally suited for
distant sound pick-up, with a precisely
controlled polar response designed to
suppress feedback without coloring the
sound. The RE90H features an exclusive
braided, shielded cable which prevents
the microphone from rotating, keeping it
firmly in place, even with wide swings in
temperature or humidity. There’s no need
for awkward “fish-line” tethering.
RE90H
◆ Available in a non-reflecting black (RE90H) or low-gloss white
(RE90HW) finish with a matching cable
◆ Quick-connect to female XLR-type, 3-pin receptacle
◆ Permanent installation with optional FMK flange-mount kit and
CPSM shock-mount kit
◆ Shielded pre-amp is highly-resistant to electrical noise and radio
frequency interference
◆ High gain electronics for added reach
◆ Position microphone exactly without unsightly twisting and turning
◆ Uniform cardioid polar pattern
◆ 25’ braided, shielded cable maintains microphone’s position (no
rotation)
◆ Steel construction reduces noise from magnetic field and RFI
◆ Cardioid polar pattern
◆ Exclusive Multiport windscreen virtually eliminates “P” pops.
◆ Three-pin male XLR-type output connector
RE90P-12 (ELRE90P12)
12” gooseneck
PHOTO - VIDEO - PRO AUDIO
RE90P-18 (ELRE90P18)
18” gooseneck
www.bhphotovideo.com
RE90H (ELRE90H)
Non-reflecting black finish
RE90HW (ELRE90HW)
Low-gloss white finish
WIRED MICROPHONES
E L E C T R O -V O I C E
609
RE-SERIES
RE90L (ELRE90LAT)
RE90B/RE90BW
Ultra Miniature Omnidirectional Lapel Mic
Boundary Microphone
Hearing is believing (you have
to look closely to see it). Ultraminiature and ultra-lightweight,
you can easily forget that you are
wearing it. Designed for sound
reinforcement in
applications such as houses of
worship, schools and business
presentations, this small, light
microphone has the highest
quality sound characteristics. It is
well-balanced throughout its full range. Omnidirectional output
is uniform and natural, no matter where the mic is placed. The
lightweight polycarbonate compact electronics housing is very
durable. A side clip attaches the unit to belt, waistband or pocket.
With the lowest profile of any boundary
microphone, the RE90B/RE90BW is one of
the smallest available. Unidirectional, it
picks up every word and delivers it fully
and naturally, without the distraction of
ambient noise.
The RE90B is specifically designed for
surface-mounted applications such as
distance learning centers, video- or
teleconferencing systems, classrooms, and houses of worship. It can be
placed on a surface for temporary use, routing its miniature cable from the
rear where it’s barely visible. Or installed permanently, with the hidden
cable routed through a hole in the surface.
◆ Alligator and tie-tac clips included
The mic is equipped with internal padding, fiber washers for the mounting
screws, and a rubber, non-slip pad covering the entire base. These elements combine to give you the advantage of extremely low surface-tomicrophone vibration. And built-in equalization provides a fuller, more natural sound than other typical boundary microphones.
◆ Lightweight, clip-on electronics pack
◆ Heavy-duty zinc die-cast body and strong, perforated steel screen
◆ Ultraminiature and lightweight (the smallest available).
◆ Tiny but sturdy 6” shielded cable
◆ Low profile
RE92H/RE92HW
◆ Half-cardioid polar response promotes excellent gain
RE90B (ELRE90B)
Non-reflecting black finish
RE90BW (ELRE90BW)
Low-gloss white finish
Unidirectional Condenser Hanging Mic
The RE92H/RE92HW are professional
quality miniature cardioid electret
condenser mics designed for applications
where the microphone needs to be
suspended from above the sound source.
Ideal for theater, houses of worship, or
any application where a small, high
quality mic needs to be “heard but not
seen”. The integrated wire director can be
easily formed at the proper angle so that
the mic points at the desired sound
source. Has a cardioid polar pattern for
high gain before feedback, and a
condenser element provides clear and
natural sound reproduction. Available in black and white finishes,
the mic features 25’ of cable, and is terminated in an in-line amp
module. XLR output provides an ultra-low noise floor.
◆
Wide, smooth frequency response
◆ Cardioid polar pattern
◆ In-line electronics module
◆ 12dB/octave switchable high pass filter
◆ Transformerless differential output to drive long cables
RE92H (ELRE92H)
Non-reflecting black finish
RE92HW (ELRE92HW)
Low-gloss white finish
RE92L (ELRE92L)
Unidirectional Condenser Lavalier Microphone
Based on a great-sounding cardioid microphone
element, this capsule features a broad and smooth
frequency response for a warm and natural sound, a
tight cardioid polar pattern for excellent off-axis
rejection, and extremely low noise to give a clean and
unadulterated sound. Designed for unobtrusive
miking of speech, the RE92L is an excellent choice for
use in broadcast, stage performance, and presentation
applications.
It has a 4’ cable terminated into an in-line amplifier with
XLR output for connection to any standard mic input
capable of supplying 24 to 48v phantom power. The
amp features a 12dB/octave switchable high-pass filter
for rolling off low frequency noise, and its
transformer-less differential output easily drives longer
cable runs. Accessories include a two-stage mic wind-screen, both single
and dual mic tie clips, an amp housing belt clip, and a zippered gig-bag.
◆ Wide, smooth frequency response
◆ Cardioid polar pattern
◆ 12dB/octave switchable high
pass filter
◆ Transformerless differential
output to drive long cables
◆ Includes both single and dual
mic tie clips
(212) 444-6605 • 1-800-947-9905 • Quick Dial 91
PHOTO - VIDEO - PRO AUDIO
610
WIRED MICROPHONES
E L E C T R O -V O I C E
POLARCHOICE
All-in-One Podium Microphones
The first podium microphones with four polar patterns, the PolarChoice series offers unprecedented
performance and flexibility—they’re like having four microphones in one! With the option of four different
pickup patterns, you simply select the best pattern for the application. The ability to conveniently select from
omnidirectional, cardioid, supercardioid or hypercardioid assures the maximum protection against system
feedback and ambient background noise. No need to inventory single-pattern microphones or expensive
interchangeable heads. Just select the pattern that fits your needs with a convenient and easy turn of a
rotary switch. PolarChoice is available in five different versions. These include the standard XLR, FL (Flange
Mount), and PC Plus for conventional, mounted podium mic installations. If a free-standing podium mic is
called for, the hard-wired PolarChoice Desktop, and the one-of-a-kind, wireless PolarChoice Satellite, round
out the most versatile and flexible podium mic line in the industry.
EV’s exclusive dual-mounted condenser transducer and sophisticated
electronics ensure that regardless of the pattern selected, the
response will remain smooth, accurate and uniform. EV’s exclusive
Multiport windscreen virtually eliminates “P pops” commonly
associated with other podium microphones. Whether your
requirement is for houses of worship, hotels, meeting rooms, or
other multi-purpose facilities where exceptional sound quality and
unmatched flexibility are critical, the first choice is PolarChoice.
PolarChoice (XLR or Flange)
PolarChoice Desktop/Satellite
◆ Free-standing weighted base for reliable
◆ A smooth and uniform response, no matter
◆
Selectable polar pattern to easily adapt to
any situation
Selectable polar pattern to easily adapt to
any situation
◆
Available with XLR connector or
thread/flange mount (cable can exit from
the side or through the bottom of the
gooseneck)
◆
Includes two-piece shock mount with
shock mount adapter
what pattern is selected
stability.
◆
Selector switch at different positions
◆
Extended low-frequency response
◆
Switchable high-pass filter
◆
Exclusive Multiport windscreen virtually
eliminates “P pops”
◆
Switchable high-pass filter
PC-12XLR (ELPC12XLR): 12” gooseneck, XLR base
PC-12FL (ELPC12FL): 12” gooseneck, flange mount
◆
Easy to use on/off mic switch with mic status LED. Switch can be programmed to
operate as either latching on/off or momentary push-to-mute/push-to-talk
PC-18XLR (ELPC18XLR): 18” gooseneck, XLR base
PC-18FL (ELPC18FL): 18” gooseneck, flange mount
◆
Available in both wireless (PC Satellite) or
wired (PC Desktop)
PolarChoice PC Plus
PC PolarChoice
Plus-18
PolarChoice Desktop:
Integrated desk stand and configurable switch
with 10’ XLR cable.
PC Desktop-5 (ELPCD5): With 5” gooseneck
PC Desktop-12 (ELPCD12): With 12” gooseneck
PC Desktop-18 (ELPCD18): With 18” gooseneck
The push-button can be configured for either toggle (push
on/off ), or as push-to-mute (cough switch).
PolarChoice Satellite: Integrated desk
stand and configurable switch for use with
plug-in EV and Telex wireless beltpacks.
PC Satellite-5 (ELPCS5): With 5” gooseneck
PC Satellite-12 (ELPCS12): With 12” gooseneck
PC Satellite-18 (ELPCS18): With 18” gooseneck
PHOTO - VIDEO - PRO AUDIO
The PolarChoice PC Plus is the first miniature gooseneck mic to
combine the features and functionality of a desktop mic, with
the small unobtrusive size of an XLR mounted gooseneck
microphone. The unique profile of the PC-Plus housing places
the push button switch and status LED in a more natural
position and also creates a lower profile housing. It goes one
step further: the lower half of the PC-Plus (with XLR connector)
can be removed and the PC-Plus can be flush mounted. All
necessary mounting is supplied.
You can also configure the microphones’ state when power is
first applied in toggle mode. For example, if you have multiple
PC Plus microphones installed, you can configure them so that
only one mic is live, when the system is first turned on.
PC Satellite-12
www.bhphotovideo.com
PolarChoice
PC Plus-12 (ELPCP12)
PolarChoice
PC Plus-18 (ELPCP18)
WIRED MICROPHONES
E L E C T R O -V O I C E
RE SERIES
Broadcast Mics
N/DYM SERIES
Live Performance Mics
635A Dynamic Omnidirectional ENG/EFP Mic
N/D267a and N/D267as
Probably the most popular and well-known ENG/EFP microphone in the
world, the 635A has survived being dropped, run over, thrown and even
being shot while on location for film, TV and radio remotes. The 635A’s
uniform frequency response (80Hz-13kHz) is specially shaped for
up-close vocals. Also available with a Neodymium element (635N/D-B).
635A • 635A/B
◆ Completely pop-free performance
◆ Four-stage pop and dust filter
◆ Internal effective shock absorber
◆ Includes stand adapter
635A/B
635A (EL635A): Black finish................109.95
635A/B (EL635AB): White finish........109.95
Handheld Cardioid Vocal Microphones
The N/D267a incorporates EV’s unique
VOB (Vocally-Optimized Bass) technology
to provide the performer with reduced
resonant distortion at low frequencies.
Critical damping of the low frequency
resonant peak has resulted in a mic that
replaces the “muddiness” found in
competitive models with greater warmth
and increased vocal clarity. This permits
greater working distances and ensures a
clean, clear, consistent sound that
“punches through the mix.”
◆
635N/D-B
◆ N/DYM element offers higher output
◆ Uniform 80 Hz to 13kHz frequency response
◆ Integral windscreen and blast filter
smooth response over a wide frequency range
635N/D-B (EL635NDB): With Neodymium element. Black finish........129.95
RE50/B • RE50N/DB
VOB technology provides tailored bass
response for controlled “proximity
effect” and exceptional vocal clarity
◆
Consistent sound over greater working distances than other models
◆
Neodymium-based magnet structure provides greater sensitivity and
signal-to-noise ratio
◆
Warm Grip handle for more comfortable feel
◆
Both include stand adapter and soft zippered carrying pouch
N/D367s
These shock-isolated, omnidirectional, dynamic
microphones were created for the most exacting
professional applications. Incorporating advanced
shock-mounting techniques, they are designed
particularly for hand-held broadcast and sound
reinforcement use. Handling and clothing noise, even
cord shock are isolated from the mic element so that
mechanical induced noise is greatly reduced.
near lips
◆ Acoustalloy diaphragm material
for very smooth response over a
wide frequency range
◆ Extremely low handling noise
via Dyna-Damp “mic in-a-mic”
shock mount system
◆ Four-stage pop filter prevents
dust and magnetic particles
from reaching the diaphragm
Cardioid Dynamic Vocal Mic
◆ Integral windscreen and blast
filter provides excellent
protection from wind noise,
excessive sibilance, and
“popping”
N/D367A
(ELND367A)
◆ Withstands high humidity,
temperature extremes, and
corrosive salt air
◆ They include a stand adapter,
vinyl carrying pouch and hard
shell case
RE50/B (ELRE50B): Black finish.........................................................................159.95
RE50N/DB (ELRE50NDB): With Neodymium capsule. Black finish.......179.95
N/D267AS (ELND267AS)
With on/off switch
Cardioid pattern for superior feedback
rejection and acoustic isolation
Omnidirectional Dynamic Mics
◆ No muddy lows when used
N/D267A (ELND267A)
◆
635N/D-B
◆ Acoustalloy diaphragm material for very
611
Featuring excellent gain-before-feedback and smooth,
controlled frequency response, the N/D367s allows
the performer or speaker to easily “work” the mic for
optimal performance. The cardioid pattern delivers
enhanced front-area sensitivity and acoustic rejection
directly behind the microphone, reducing feedback
under live performance conditions. Additionally, it’s
polar patterns are unusually uniform with frequency,
ensuring superior isolation when used in the studio.
Although this is a popular choice for both genders, it
has become recognized as the perfect compliment to
a woman's voice.
◆
Classic N/DYM sound and
high sensitivity
◆
Warm Grip handle for more
comfortable feel
◆
Smooth, controlled frequency
response
◆
Noiseless on/off switch
◆
Also sounds great when used
on a podium
◆
Includes stand adapter and
soft zippered carrying pouch
◆
Superior multistage shock
mount for unmatched low
handling noise
(212) 444-6605 • 1-800-947-9905 • Quick Dial 91
PHOTO - VIDEO - PRO AUDIO
612
WIRED MICROPHONES
RØDE
NT-3
Multi-Powered 3/4” Condenser Mic (RONT3)
The stylish and modern NT3 is a very capable performer with a wide range of applications in studio, stage,
location and broadcast environments. Made from the finest components to deliver results demanded by
engineers and musicians alike, the NT3 is a true condenser with transformerless output. The internal capsule is
shock mounted and housed in a substantial cast-metal body with a satin-nickel finish. It features battery and
phantom power and its low noise (under 16dB SPL A-weighted) makes it hard to match. Dynamic range is
greater than 123dB with a maximum SPL of 140dB and sensitivity is a healthy -39dB (ref 1V/Pa).
◆ High immunity to RF interference
◆
Premium quality surface mount components
◆ Full frequency response
◆
Battery status LED indicator
◆
◆
Stainless-steel mesh grille with a dense
internal foam pop shield
High strength welded and heat
treated mesh head
◆
Includes a padded zipped
pouch, a foam windshield and
a rubber standmount clip with
a thread adapter for both 3/8”
and 5/8” microphone stands.
NT-4 Multi-Powered 1/2” X/Y Stereo Microphone
(RONT4)
In the past, true stereo recording required the use of ‘matched’ microphones. More than simply using two of the
same mic models, matched pairs had to be stringently manufactured so variables such as frequency plots,
sensitivity ratings and SPL characteristics would be almost identical. However, even with two matched ‘mono’
microphones, achieving a successful stereo image still depends on how each mic is placed in relation to the
other. Matched mic pairs also need a uniform angle between them to achieve the same effect. This all changes
with the NT4. A studio-grade go-anywhere stereo condenser, the NT4 is a totally flexible mic that enables direct
connection to most recording devices. It utilizes two 1/2” matched capsules in a perfectly aligned -90°, XY
arrangement. All you have to do is point and keep an eye on recording level. It requires 48v phantom power,
but for flexibility, a 9v battery can also be used. Includes case with a stand mount, wind shield and custom
stereo cables (XLR and minijack).
NT-6 Compact 1/2” Condenser Mic
Specifically designed for difficult mounting applications, the NT6 is extremely
well-suited to any situation where a small ‘unobtrusive’ but powerful microphone
system is required. Designed for film, broadcast, live performance, surround and
environmental recording applications, the NT6 utilizes the 1/2” (externally biased)
gold sputtered true condenser transducer used in the world- renowned NT5. The
capsule is designed to attach to a custom made, multi-position swivel mount
allowing it to be independently positioned with ease. To further increase the
versatility of the NT6, it is supplied with two thread adapters - 1/4” to 5/8” and
1/4” to 3/8” that enable the capsule assembly to be securely attached to a wide
variety of mic stands, tripods and boom poles.
◆
Mic capsule is connected to the pre-amp
(body) by a 10’ Kevlar fiber-reinforced cable.
In the heavy-duty satin-nickel-plated body
is a balanced output preamp with wide
dynamic range and full frequency response.
PHOTO - VIDEO - PRO AUDIO
◆
Includes two 2-position switches located on
the main body that provide the freedom to
step from a flat response to 80 Hz high-pass
filter and a pad adjustment of 0dB or -10dB
attenuation.
www.bhphotovideo.com
NT-6 (RONT6)
◆
Includes a mic preamp (body), capsule, a
10’ Kevlar fiber-reinforced cable, RM5 stand
mount, 2-axis swivel mount, two thread
adapters, zippered pouch (ZP1) and a
windscreen (WS5).
WIRED MICROPHONES
SENNHEISER
613
IS SERIES
Gooseneck /Podium
Condenser Mics
Sennheiser’s IS Series consists of the MZH-3015 (15”), MZH-3040 (16”) and MZH-3042
(16” dual) metal goosenecks and the ME34 (cardioid), ME35 (supercardioid) and ME36
(lobar mini shotgun) condenser capsule heads. The rugged, matte black goosenecks
(Ø 6 mm) have a special anti-reflective coating and a balanced, floating XLR-3 connector,
enabling them to be powered from a 12-48v phantom power supply. The goosenecks
combined with the versatile ME34/35/36 condenser microphone heads are ideal for
applications like conference, PA, studio, broadcast, and churches.
MZH-3015 (SEMZH3015): Provides a low profile, unobtrusive placement option. Use with the ME36 when an
inconspicuous mic is required ....................................................................................................................................................89.95
MZH-3040 (SEMZH3040): With a single flex near its base, this elegant 16” gooseneck holds position while
maintaining a streamlined appearance................................................................................................................................103.50
MZH-3042 (SEMZH3042): Double flex design. Same length as the MZH-3040 but provides an additional top
bend for ultimate capsule placement precision................................................................................................................117.95
Capsules
Capsules are ideal for a range of
applications including: conference,
public address, studio, broadcast, video
and others. All contact points are gold
plated and corrosion-resistant, insuring
maintenance-free long term operation.
Each includes a windscreen.
ME 34 Cardioid Capsule (SEME34)
A permanently polarized condenser
microphone capsule with a Cardioid
polar pattern for universal miking
applications with a smooth response
across all frequencies........................114.95
ME 35 Supercardioid Capsule (SEME35)
A back-electret condenser microphone
capsule with a supercardioid polar patter
that achieves optimum isolation..114.95
ME 36 Mini Shotgun Capsule (SEME36)
A lobar mini shotgun back-electret
condenser mic capsule. It facilitates
inconspicuous placement when used
with the MZH-3015 gooseneck.
Detailed directionality, high SPL and
unprecedented low self-noise
(23dB A-weighted). Interference
tube/capsule housing rotates for
optimum alignment ..........................179.50
IS Series Accessories
12” Wired Floor Stand (SEMZFS30)
With an XLR-F top and XLR-M bottom.
For MZH goosenecks ......................159.95
XLR Female Flange Mount (SEMZT30)
For fixed installation. Requires 24.21mm
diameter hole.......................................16.95
24” Wired Floor Stand (SEMZFS60)
Same as above except 24” high ..169.95
Table Stand (SEMZTX31)
With 3-pin XLR connector................99.95
32” Wired Floor Stand (SEMZFS80)
Same as above except 32” high ..181.95
Table Stand (SEMZTX31PTT)
With push-to-talk button, 3-pin XLR
connector............................................149.95
Velour Windscreen (SEMZW34)
For the ME34 and ME35 ...................17.95
Velour Windscreen (SEMZW36)
For the ME36.........................................32.95
Thinline Metal Carrying Case (SECL)
Fits ME34, ME35, ME36 mic capsules,
MZH3015, MZH3040, MZH3042
goosenecks and MZQ100 clip.........73.95
Boundary Layer Adapter (SEMZBD36)
For the ME36. Stainless steel........129.95
Overhead Mounting Cable (SEMZC30)
1.1mm diameter Kevlar-reinforced 29.5’
cable with an integrated preamp. For
hanging applications......................128.95
Boundary
Layer
Adapter
(SEMZBD36)
Ceiling Hanger (SEMZH30) ...............21.95
Suspension Shock Mount (SEMZS31)
For use with MZT30, requires 50mm
diameter hole.......................................41.95
Microphone Clip (SEMZQ100)
For IS Series goosenecks, 3/8” and 5/8”
threads ....................................................26.95
Microphone Clip
(SEMZQ100)
XLR Female Flange
Mount (SEMZT30)
(212) 444-6605 • 1-800-947-9905 • Quick Dial 91
PHOTO - VIDEO - PRO AUDIO
614
WIRED MICROPHONES
SENNHEISER
K6 SYSTEM
Modular Electret Condenser Microphone System
The K6 Series is a modular condenser microphone system
of exceptionally high quality. Available with a wide
variety of interchangeable modules for different polar
patterns, and capsule sizes, the K6 System provides a
flexible tool for all sound reinforcement work.
The modular design of the K6 power supply allows you
to use different lavalier capsules for on air talent and live theater applications.
Omni-Directional Lavalier Capsules
K6/K6P
Powering Modules
At the heart of the K6 series is the K6 power
supply. The K6 is the backend of the multimike system and accommodates a balanced,
low impedance 3-pin XLR output connector.
The K6 Module supplies power to any capsule
in the series. It can run for 150 hours on a
single AA battery, or can be used with 12 to
48v phantom power (AA battery doesn’t drain
while phantom-powering). The K6 features an
on/off switch with LED battery status
indicator; and a bass roll-off switch which
will compensate for proximity effect in close
miking, or for wind rumble in field recording.
The K6P phantom powering module provides
an alternative to the K6 that is 42mm shorter
and 15 grams lighter, while offering the same
integrated bass roll-off switch. Ideal for fixed
installations and applications where size is a
factor and phantom power availability is not
a concern.
K6 System
MKE2-60 Gold
The industry-standard for TV and theatrical production, the MKE2-60
sub-miniature omni lavalier is unobtrusive and easy to conceal. Its
accurate frequency response reproduces natural, uncolored sound.
An extremely thin low mass diaphragm exhibits extraordinary transient
response. The stranded, stainless-steel reinforced cable provides
maximum tensile strength and low contact (clothing) noise. May also
be used as a clip-on instrument mic.
MKE102-60
Similar in size to the MKE2-60 with several significant differences. The capsule
head can easily be detached for use with straight or right angle cables.
Highly immune to moisture, it is a natural for theater or outdoor productions.
Frequency response is optimized for speech pickup with its 4 to 6 dB rise at
8kHz. Extremely low self-noise makes it ideal for broadcast as well.
MKE104-60
The MKE104-60 is the same as the MKE102-60 except it is a cardioid mic,
which makes it ideal for applications that require isolation of the source.
Use in live musical performances and for reporting when there are several
announcers covering a scene with different audio feeds.
(lavaliers for K6 do not include MZQ222 clip and MZW2 windscreen)
K6 (SEK6): Powering module (powered by AA
MKE104-60 (SEMKE10460): Cardioid lavalier
battery or phantom power). On/off switch
with LED indicator and bass rolloff.........209.95
for K6 with right-angle cable. Includes a mic
capsule, windscreen, right-angle cable to
lavalier with K6 collar and a tie clip ........289.95
MKE2-60/K6 (SEMKE260K6): Omnidirectional
lavalier system with K6 power supply. Includes
a black microphone, a K6 powering module, a
dual-post tie clip and a carrying case ....509.95
reduced sensitivity lavalier for K6, black with
integrated K6 collar ......................................276.95
MKE102S-60 (SEMKE102S60): Omnidirectional
lavalier system. Includes a black microphone
capsule, a windscreen, a straight cable with K6
collar and a tie clip........................................289.95
MKE102S/K6 (SEMKE102SK6): Omnidirectional
lavalier system with K6. Includes a black
microphone capsule, a straight cable with K6
collar, a tie clip, K6 and a carrying case.537.50
MKE102-60 (SEMKE10260): Omnidirectional
lavalier for K6 with right-angle cable.
Includes a microphone capsule, windscreen,
right-angle cable and black tie clip ........289.95
MKE104S-60 (SEMKE104S60): Cardioid lavalier
system. Includes a black microphone capsule,
a windscreen, a straight cable with K6 collar
and a tie clip ....................................................289.95
MKE104S/K6 (SEMKE104SK6): Cardioid lavalier
system with K6. Includes a black microphone
capsule, a straight cable with K6 collar, a tie
clip, K6 and a carrying case........................537.50
K6P (SEK6P): K6 with phantom power only. No
on/off switch ...................................................239.95
MKE2-60 Gold (SEMKE260): Omnidirectional
PHOTO - VIDEO - PRO AUDIO
www.bhphotovideo.com
WIRED MICROPHONES
SENNHEISER
615
K6 SYSTEM
Accessories for Lavalier Capsules
Windscreens for MKE2
Steel Mesh Grill and Windscreen
Available in Black (SEMZW2A) and Nickel (SEMZW2G)
finish..............................................................................9.95
Foam Windscreen (SEMZW2F) .............................4.95
Pin Clips for MKE102/104
A pin-style, lavalier clothing clip. Available in
Black (SEZH100B) and Grey (SEZH100G) finish.......9.95
Clips for Right Angle KA Cables
Available in Black (SEMZQ100B), Beige (SEMZQ100BE)
and Grey (SEMZQ100G) finish....................................4.50
Stand Off Clip (SES44435)
Available as add on accessory (black) ..............3.50
Gray Magnetic Microphone Holder
For MKE2,102, and 104 (SEMZM102) .....................CALL
Steel Mesh Grille for MKE-102
Available in Black (SEMZW102B) and Nickel
(SEMZW102N) finish ......................................................9.95
Steel Mesh Grille for MKE-104
Available in Black (SEMZW104B) and Nickel
(SEMZW104N) finish....................................................27.95
Foam Windscreen (SEMZW2F)
For MKE2 and MKE2 Gold......................................4.95
Accessory Kit for MKE-2 (SEMZ2)
This accessory kit includes a nickel and
black dual post tie clip, a nickel and
black windscreen, a black and grey pin
clip, and a carrying case ...................37.50
Steel Mesh Grill
Provides adequate protection from shock and
minimizes noise due to wind and proximity
effect. Available in Black (SEMZW2A) and Nickel
(SEMZW2G) finish..........................................................9.95
MKE-102/104 Accessory Kit (SEMZ100)
This accessory kit includes a nickel and
black dual post tie clip, a nickel and
black windscreen, a black and grey pin
clip, and a carrying case ...................41.95
Windscreens for MKE2
Tie Clips
Single Bar Lavalier Tie Clip (SETBUS)
For the ME102 and ME104 .....................................5.50
Dual Post Tie Clips
For MKE2/102/104. Available in Black (MZQ222)
and Nickel (MZQ222NI) finish ................................12.95
Double Tie Clip (MZQ22A): For MKE2..............15.95
Adjustable Headset Boom
A unique device that allows you to
adapt any Sennheiser lavalier for use as
a headworn microphone. Comfortable
and rugged, it fits any head. Available
in Black (SENB2) or Beige (SENB2BEI) .57.95
E815s / E825s / E835s
e815s
e825s
The e815s is a cardioid vocal microphone specially designed to perform under
pressure while cutting through the mix with its high output.
The e825s cardioid pick-up pattern provides excellent feedback and spillage
rejection. The rugged metal construction and internal damping isolates handling
noise. Ideal for general vocal and instrument miking and club PA. Complete with
silent on-off switch as standard. Unbeatable quality at an ultra competitive price.
The top-of-the line e835s is a vocal stage mic, designed to perform under pressure.
Uniform frequency pick-up pattern maintains signal quality when moving on and
off axis during performance. Gentle presence boost to even tonal response
ensures clarity and projection. Minimal proximity effect provides consistently
clear bass and performance when singing closer to or further from capsule.
T H E Y A L L F E AT U R E
◆ Rugged metal construction
◆ Low sensitivity to impact and handling
noise thanks to shock-mounted capsule
e835s
◆ Hum compensating coil reduces
electrical interference
◆ Neodymium ferrous magnet with boron keeps
the mics stable regardless of climate
◆ Falcon ring provides consistent sound over time
◆ On/off switch (magnetic reed), can be locked in
the “on” position if required
(212) 444-6605 • 1-800-947-9905 • Quick Dial 91
PHOTO - VIDEO - PRO AUDIO
616
WIRED MICROPHONES
SHURE
PG48 • PG58 Cardioid Dynamic Speech and Vocal Mics
High performance dynamic cardioid microphones tuned specifically for vocal applications, the PG48 is
designed for spoken word applications, while the rugged PG58 is tuned to accentuate the clarity of lead
and back-up vocals. Both feature a tailored frequency response that is smooth and extended. Their
cardioid polar pattern picks up the most sound from in front of the microphone and some sound from
the sides. Less susceptible to feedback in high volume settings.
◆ Dynamic cartridge has a simple,
rugged coil. Handles extreme
volume levels without distortion.
◆ Cartridge includes a neodymium
magnet for high output level.
◆ Internal shock mount for reduced
handling noise (PG58 only).
◆ Durable metal construction
◆ On/off switch for onstage control.
◆ Steel mesh ball grille with integral
“pop” filter reduces explosive breath
sounds and wind noise.
◆ Includes 15’ cable, break-resistant
mic clip and storage bag.
PG48: Cardioid dynamic microphone. Available with XLR-to-1/4” cable (SHPG48QTR) or XLR-to-XLR cable (SHPG48XLR) ..............39.00
PG58: Cardioid dynamic microphone. Available with XLR-to-1/4” cable (SHPG58QTR) or XLR-to-XLR cable (SHPG58XLR) ..............59.00
SM48/SM48S Dynamic Cardioid Vocal Mics
The SM48 is a unidirectional dynamic microphone designed for professional sound reinforcement and
broadcasting applications. It maintains a true cardioid pattern throughout the frequency range,
ensuring high gain before feedback and rejection of off-axis sound. The tailored frequency response is
ideal for vocals. A presence rise brightens mid-range performance, and a low frequency rolloff controls
proximity effect. Includes a shock mounted cartridge, a steel mesh grille, and an integral “pop” filter.
The SM48S adds a lockable On/Off switch.
◆ Cardioid pickup pattern rejects
off–axis sound and provides
superior gain before feedback
◆ Rugged shock-mounted cartridge
for reduced handling noise.
◆ Frequency response tailored for
◆ Built-in “pop” filter reduces explosive
vocals with brightened mid-range.
Low-frequency bass rolloff controls
proximity effect.
◆ 55Hz to 15kHz frequency response.
SM48-LC (SHSM48LC): Dynamic Mic without a cable.....................................Call
breath sounds and wind noise
◆ Lockable On/Off switch (SM48S).
◆ Adjustable stand adapter & carrying
case included.
SM48S-LC (SHSM48SLC): Dynamic Mic with on/off switch, no cable .......Call
SM57 Dynamic Cardioid Vocal/Instrument Mic
A true classic, the SM57’s outstanding performance and diversity make it the “workhorse” of stages and
studios worldwide. Ideal for vocals, the SM-57’s carefully contoured frequency response means clean,
well-defined instrument reproduction and rich, warm vocal pickup on lecterns or stages. Extremely
effective cardioid pickup pattern isolates the main sound source while minimizing background noise. It is
also used on the podium of the U.S. President for over 30 years.
◆ Contoured frequency response for
◆ Unusually effective cardioid pattern
clean, instrumental reproduction
and rich vocal pickup.
isolates the main sound while
minimizing reflections caused by
poor studio or location acoustics
and background noise.
◆ Shock-mounted cartridge reduces
mic handling noise and mic stand
rumble.
◆ Ideal for narration and dialogue.
◆ Extremely durable - even under the
heaviest use.
◆ Frequency response: 40 to 15k Hz.
◆ Designed for hand-held use or on a
stand. Includes a break-resistant
swivel adapter that rotates 180°.
SM57-LC (SHSM57LC): Dynamic Cardioid Vocal/Instrument Mic without a cable ..................................................................................99.00
PHOTO - VIDEO - PRO AUDIO
www.bhphotovideo.com
WIRED MICROPHONES
SHURE
617
SM58 Dynamic Cardioid Vocal Microphone
The SM58 is a unidirectional (cardioid) dynamic microphone designed for professional vocal use in live
performance and sound reinforcement. Cardioid pickup pattern isolates the main sound source while
minimizing unwanted background noise. In addition, it has a highly effective, built-in spherical filter
that minimizes wind and breath “pop” noise. The SM58 has a tailored vocal response for a sound which
is a world standard. Rugged construction, a proven shock mount system, and a steel mesh grille ensure
that even with rough handling, the SM58 will perform consistently. Outdoors or indoors, singing or
speech – the SM58 is the overwhelming choice of professionals worldwide.
◆ Unusually effective cardioid pickup pattern minimizes background noise and undesirable effects of studio and location
acoustics. Rear and side rejection uniform to very low frequencies and completely symmetrical about microphone axis
◆ Shock-mounted cartridge
◆ Designed for both field and studio use
◆ Self-contained spherical filter controls
— hand-held or on a stand. Includes
slip-in swivel adapter.
explosive breath sounds (“pop”) and
wind noise in outdoor locations.
reduces mic handling noise
and mic stand rumble.
SM58-CN (SHSM58CN): Supplied with break-resistant stand adapter which rotates 180°. With cable .....................................109.00
SM58-LC (SHSM58LC): Supplied with break-resistant stand adapter which rotates 180°. Without cable...................................99.00
SM58-S (SHSM58S): Supplied with break-resistant stand adapter which rotates 180°. With On/Off switch...........................104.00
SM86 • SM87A
SM-86
SM-87A
Cardioid/Supercardioid Condenser Vocal Mics
Ideal for professional use in live performance with stage or personal in-ear monitors, the SM-86
is an extremely rugged microphone designed to withstand the rigors of touring while delivering
studio-quality sound. The tailored frequency response of the SM-86 reproduces vocals with
clarity. A cardioid pickup pattern isolates the main sound source while minimizing unwanted
background noise. The built-in three-point shock mount minimizes handling noise, and a
two-stage pop filter reduces wind and breath “pop” noise.
The choice of the world’s top entertainers, the SM87A features a smooth frequency response
that is tailored for warm, rich vocal reproduction. Supercardioid polar pattern permits high gain
without feedback and rejects unwanted sounds. A three-stage wind/pop filter minimizes breath
noise and an excellent internal shock mount minimizes mic stand rumble and handling noise.
SM-86 Features
SM-87A Features
◆ Combines the ruggedness of Shure’s SM line
with the studio quality audio of a Shure
condenser—the first model to join the SM
line in over 10 years.
◆ Cardioid polar pattern and a wide
frequency response of 50 Hz to 18 kHz.
The mic additionally delivers high gainbefore-feedback and a tailored frequency
response for a clear reproduction of vocals.
◆
Equipped with an integral two-stage
windscreen and pop filter.
◆
Built-in, three-point shock mount virtually
eliminates stand and handling noise.
◆
Housed in a rugged, silver-colored,
enamel-painted enclosure incorporating a
steel-mesh grille.
◆
Requires phantom power for operation.
SM86 (SHSM86): Cardioid condenser handheld microphone ...........Call
◆ Flat frequency response for greater gain
before feedback.
◆ Low-frequency roll-off reduces low-
frequency rumble and handling noise and
compensates for proximity effect.
◆ Low RF and magnetic hum susceptibility
◆ Low distortion output and wide dynamic
range for a variety of load impedances.
◆ Operates on 11 to 52v DC phantom power.
SM87A (SHSM87A): Super-cardioid condenser handheld microphone.....214.95
(212) 444-6605 • 1-800-947-9905 • Quick Dial 91
PHOTO - VIDEO - PRO AUDIO
WIRED MICROPHONES
618
SHURE
BETA 58A Vocal Dynamic Supercardioid Mic
The Beta 58A is a high-output dynamic vocal mic designed for professional sound reinforcement. It
has a shaped frequency response that is ideal for close-up vocals. And the superb performance of this
mic is not affected by rough handling because of its rugged construction, pneumatic shock mount
system, and hardened steel mesh grille. Ideal for speech applications, the Beta 58A maintains a true
supercardioid pattern throughout it’s frequency range. This ensures high gain before feedback,
maximum isolation from other sound sources, and minimum off–axis tone coloration. Also incorporates
a Neodymium magnet for high S/N ratio output, and an advanced electro-pneumatic shock mount
design to effectively minimize transmission of handling or stand noise.
◆ Wide and smooth frequency
◆ Humbucking coil permits use in strong
response adds extra clarity
hum fields produced by lighting
◆ Plug element pins are gold plated for
durable and low-noise transfer
Beta 58A (SHBETA58A): Super-cardioid handheld dynamic microphone ..................................................................................................Call
Beta 87A • Beta 87C Supercardioid
and Cardioid Condenser Vocal Mics
SM-86
SM-87A
The first choice of performers around the world, the Beta 87A and Beta 87C are premium
quality vocal mics with superb accuracy, detail, and rich vocal production. Used in professional sound reinforcement and broadcasting applications, they combine ruggedness
with superb performance. The Beta 87A (supercardioid) and Beta 87C (cardioid) provide
maximum isolation while offering high gain before feedback. Both offer a controlled lowfrequency roll-off that compensates for proximity effect and prevents the “boomy” sound
often associated with close-up use. They also feature improved shock mounting and a
hardened, dent-resistant steel mesh grille with a built-in pop filter.
◆ Advanced cartridge shock-mount
system reduces handling noise and
absorbs mechanical shocks.
◆ Very low susceptibility to RFI and
Beta 87A Only
Beta 87C Only
Supercardioid pattern provides maximum isolation
while offering minimal off-axis coloration and high
gain before feedback. It has an exceptionally
smooth frequency response with gradual presence
rise that brighten the upper midrange.
Maintains its cardioid pattern throughout its
frequency range, ensuring maximum isolation and
high gain before feedback. Exceptionally smooth,
wide frequency response includes a slight presence
rise for a warm, natural sound.
Beta 87A (SHBETA87A) ............................................249.95
Beta 87C (SHBETA87C) .............................................249.00
electromagnetic hum.
◆ Phantom powered (11-52v DC).
◆ Built-in three-stage pop filter mini-
mizes breath pop and wind noise.
◆ High S/N ratio of 69dB (Beta 87A)
and 72dB (Beta 87C).
◆ Maximum SPL of 142dB (Beta 87A)
and 139dB (Beta 87C).
◆ Wide dynamic range (117dB) and
low distortion characteristics.
◆ Thick handle for a comfortable feel
when hand-held. They include a
break-resistant swivel adapter.
PHOTO - VIDEO - PRO AUDIO
VP64A Omnidirectional Dynamic Mic
The VP64A combines performance and comfortable feel with handsome appearance.
Omni-directional pickup pattern provides uniform pickup on or off axis, eliminating the
need for critical mic positioning. Neodymium magnet for increased output and maximized
S/N ratio. Tailored frequency response (50Hz to 12kHz) with mid-range presence rise adds
crispness and clarity to speech. The internal rubber isolation mount protects the mic
cartridge and minimizes handling noise. Water-resistant mesh grille allows use in adverse
weather conditions. Supplied windscreen further reduces “pop” and wind noise.
VP64A (SHVP64A): Omnidirectional dynamic mic, 7.9 x 1.5”..............................................77.95
VP64AL (SHVP64AL): Same as above except with extended handle. 9.9 x 1.5”........... 89.95
www.bhphotovideo.com
WIRED MICROPHONES
SHURE
HEADWORN VOCAL MICS
ALL-PURPOSE MICS
Beta 53
Omnidirectional Condenser Mic
The Beta 53 is designed for
applications where
inconspicuous appearance
and incredible sound quality
are required. Ideal for event
productions, trade shows or
seminars - the best sound
with minimal visibility.
It’s lightweight,
adjustable, modular
headband, flexible wireframe and soft earpieces provide a comfortable
fit while still allowing the Beta 53 to be positioned as close to the left
or right corner of the mouth as possible. The mic itself features an
extended frequency response and high SPL handling ability.
◆ Comfortable, latex-free Dynaflex earforms that hide behind the ears
619
588SDX Handheld Mic
A ball-type, cardioid dynamic mic that provides
excellent voice reproduction. Ideal for speech in
schools, churches, and meeting rooms, it’s spherical grille is an effective wind and pop filter, while
it’s symmetrical cardioid pickup pattern minimizes
feedback. Lockable On/Off switch and internal
impedance selection. Includes a slip-in breakresistant swivel adapter for stand-mounted use.
◆
Controlled low-frequency response combined
with a smooth high-frequency rise for clear and
intelligible voice pickup
◆
Neodymium magnet for high sensitivity
◆
Shock-mounted cartridge for quiet operation
and low stand/handling noise
◆
Dual impedance selectable by internal socket
◆ Tough, steel-mesh grille resists wear from constant use and handling;
◆
Ultra-thin detachable mic boom mount for right or left positioning
◆
Interchangeable frequency response caps (mild or high, 2 pc. each)
◆
◆
Includes two foam windscreens, clothing clip for securing cable,
durable carrying case.
588SDX (SH588SDX): With attached cable.....................................................64.50
die-cast handle
Frequency response is 80Hz to 15kHz
Beta 53 (SHBETA53): Detachable in-line preamp for wired applications,
requires phantom power. Black finish.......................................................... Call
545SD Unidyne III
WBH53: With TA4F connector for wireless applications. Available in
Black (SHWBH53B) and Tan (SHWBH53T) finish...................................................Call
A cardioid dynamic microphone, the 545SD Unidyne III
ships connected for low-impedance operation. Use on
lecterns for public address systems such as those used
in legislatures, convention halls, hotels, public auditoriums, stadiums, schools, and churches.
Beta 54
Supercardioid Condenser Mic
◆ Silent magnetic reed on/off switch with lock option
◆ Exceptionally uniform cardioid pattern minimizes
A subminiature, electret condenser
head worn mic, the Beta 54 provides
uncompromised sound quality
and reliability with minimal visibility.
Despite it’s small size, the
condenser element delivers full,
clear, and natural reproduction
of speech and vocals.
feedback in PA applications
◆
Frequency response is 50Hz to 15kHz
545SD-LC (SH545SDLC): Without cable........................99.95
565SD Unisphere 1
◆ Durable, low-profile wire
frame headband is fully
adjustable for stability and comfort.
◆
Supercardioid polar pattern provides maximum gain-before-feedback and ambient rejection
◆
Extended frequency response tailored for vocal performances
◆
Snap-fit foam windscreens stay in place during intensive movement
◆
Includes plastic carrying case to protect the mic and its accessories
Beta 54 (SHBETA54): Detachable in-line preamp for wired applications,
requires phantom power. Black finish ........................................................ Call
WBH53: With TA4F connector for wireless applications. Available in
Black (SHWBH54B) and Tan (SHWBH54T) finish .................................................Call
The 565 SD is a dual impedance, cardioid dynamic
microphone with a strong, wiremesh, spherical
front grille that contains a very effective wind and
“pop” filter. With sound characteristics similar to
the SM58, the mic provides excellent speech
reproduction on lecterns and stages. Ideal for use
in public auditoriums, churches, convention halls,
and schools.
◆ Silent magnetic reed on/off switch with lock-on
option
◆
Frequency response is 50Hz to 15kHz
565SD-CN (SH565SDCN): With 20’ XLR cable .............................................125.95
565SD-LC (SH565SDLC): Without cable........................................................107.50
(212) 444-6605 • 1-800-947-9905 • Quick Dial 91
PHOTO - VIDEO - PRO AUDIO
620
WIRED MICROPHONES
SHURE
LAVALIER/HEADWORN MICS
SM11
SM93
Lavalier Omnidirectional Dynamic Mic
Miniature Omnidirectional Lavalier Mic
The SM11 is a miniature dynamic lavalier microphone
designed for use in sound reinforcement and similar
uses where a small, professional-quality, microphone is
required. The SM11 has an omnidirectional pickup
pattern, and its frequency response is optimized for
lavalier use. The microphone is supplied with a tie clasp
assembly, tie tack assembly, connector belt clip, and
zippered carrying/storage bag.
◆ Frequency response optimized for lavalier use. Acoustically matches
most stand- or desk-mounted microphones
◆ Small and lightweight for unobtrusive, virtually unseen operation
◆ Smooth exterior and recessed grille screen minimize clothing noise
◆ Extremely flexible long-life cable
◆ Two mounting options–tie clasp or tie tack
◆ Convenient, secure belt clip attaches connector to belt or clothing
The SM93 is an economical subminiature lavalier
condenser mic designed for use in speech
applications. Despite its small size, the SM93 mic
element provides full, clear sound comparable to
much larger mics. Its smooth frequency response
is specially tailored for chest-worn microphone
operation, while controlled low-frequency rolloff
reduces clothing and room noise. Runs on 11-52v
DC phantom power.
◆ Designed for wired applications, the SM93
includes a preamp assembly with XLR connectors. The preamp can be pocketed, strapped to
the body, or clipped to belt or waistband
◆ Supplied with small, inconspicuous mounting
hardware. Includes a sew-on mounting bracket,
a mounting block with attached tie bar, and an
acoustic windscreen.
SM11 Lavalier Omnidirectional Dynamic Mic (SHSM11CN)................99.95
SM93 Omnidirectional Lavalier Mic (SHSM93) ...................................146.50
WL50/WL51
WH20/WH30
Professional Subminiature Lavalier Mics
Only 5.8mm in diameter, and weighing just .34
grams, the WL50 and the WL51 set the standard
for miniature lavalier mics. Visually unobtrusive
they virtually disappear when in use, making
them ideal for theater, television broadcast,
video/film, and event production. And despite
their small size, the condenser element provides
full, clear and natural reproduction of speech.
Headworn Cardioid Mics
The WH20 (dynamic) and WH30
(condenser) are rugged, lightweight
headset mics with high-quality
voice pickup. They fit securely for
active users with low visibility.
Use for any voice communications
application where comfort and
reliability are required.
The omnidirectional WL50 has an extended frequency response and
comes in three colors and two sensitivity options; Standard (-45dBv/Pa)
and Reduced (-55dBv/Pa). It also includes four frequency response
caps: two silver mesh (4dB mild boost) and two gold mesh (10dB high
boost). Interchange them as needed to achieve optimal sound and
clarity for various mic placements and mounting configurations.
◆ Cardioid pattern provides greater gain-before-feedback and isola-
The cardioid WL51 features a smooth frequency response and low
-49dBv/Pa sensitivity to provide optimal gain with very low noise output.
Ideal for those situations where loud ambient environments limit the
use of an omni mic. Includes a watertight protective carrying case.
headset. The headband, wireframe, and gooseneck are adjustable.
WL50: Standard sensitivity, 5’ attached cable with TA4F connector.
Available in Black (SHWL50B), White (SHWL50W) and Tan (SHWL50T) ....203.95
WL50X: Standard sensitivity, 10’ attached cable. Without connector.
Only available in Black (SHWL50BX) ..............................................................189.95
tion from ambient noise or unwanted sound like air-conditioning
◆ Carefully shaped frequency response includes a voice-frequency
presence peak. Low-frequency rolloff compensates for the proximity
effect inherent in cardioid microphones during close-talk operation
◆ Integrated elastic CROAKIES headband comfortably secures the
◆ Extra-strong mic cable resists breakage. Collapsible mic boom for
easy storage and transportation. Includes foam windscreen and
clothing clip
WH20TQG (SHWH20TQG): With 4-pin mini-connector...........................79.50
WH20QTR (SHWH20QTR): With 1/4” connector .........................................79.50
WH20XLR (SHWH20XLR): With XLR-M connector .....................................74.95
WL50-LO: Reduced sensitivity, 5’ attached cable with TA4F connector.
Available in Black (SHWL50BLO) and Tan (SHWL50TLO) ..............................227.95
WH30TQG (SHWH30TQG): With 5.3’ cable terminated to a TA4-female
mini-connector .................................................................................................101.95
WL51: Available in Black (SHWL51B) and Tan (SHWL51W) .........................228.95
WH30XLR (SHWH30XLR): With a 10’ XLR cable & in-line pre-amp ....163.95
PHOTO - VIDEO - PRO AUDIO
www.bhphotovideo.com
WIRED MICROPHONES
SHURE
621
INSTALLED SOUND - EASYFLEX SERIES
EZG Miniature Cardioid
Condenser Gooseneck Microphones
These miniature gooseneck condenser mics are the perfect choice to capture speech and
vocals in environments where quality, value and budget are primary considerations.
Designed for podium or desk applications, they offer a cardioid polar pattern, and are
available in either 12” or 18” lengths. Each charcoal gray microphone comes standard with
a single flexible gooseneck section for ease in accurate positioning, as well as a matching
slip-on foam windscreen. Choose a locking flange mount with an integrated preamp and
XLR connector for easy permanent install. Or, choose side-exit mounting with 10’ cables,
in-line preamps and threaded mounting flanges - easily adaptable to a standard mic stand.
EZG/12 (12”) and EZG/18 (18”) Mics
EZG/12SE (12”) and EZG/18SE (18”) Mics
• Cardioid polar pattern
• Integrated preamplifier with XLR connector
• Locking flange mount
• Cardioid polar pattern
• Attached 10’ side exit cable with in-line preamplifier
• Threaded mounting flange
EZO Overhead Microphones
The perfect choice to reinforce choirs and performance groups in recording or sound
reinforcement in environments where quality, value and budget are primary considerations.
The overhead condenser microphones feature a cardioid polar pattern, and are available
in charcoal gray or white for unobtrusive placement in most surroundings.
Each Easyflex overhead microphone ships with a flexible wire form for accurate and stable
positioning when suspension mounting to a ceiling, and ships with 30’ cable with in-line
preamplification, and a matching slip-on windscreen.
EZO/G Charcoal Gray and EZO/W White
Overhead Microphones
• Cardioid polar pattern
• Attached 30’ cable with in-line preamplifier
• Adjustable wire frame for easy positioning
EZB/C Cardioid and EZB/O
Omnidirectional Boundary Microphones
• Charcoal gray finish
• Attached 12’ cable with in-line preamplifier
• Recessed mounting holes for quick installation
EZB Miniature Cardioid Condenser Boundary Mics
The perfect choice for all types of low profile applications, where quality, value and budget are
primary considerations. The EZB microphones feature either a cardioid or omnidirectional
polar pattern, and are available with a charcoal gray finish for unobtrusive placement in most
surroundings. They ship with an attached 12’ cable with in-line preamplifier, and feature
recessed mounting holes for ease of installation.
(212) 444-6605 • 1-800-947-9905 • Quick Dial 91
PHOTO - VIDEO - PRO AUDIO
622
WIRED MICROPHONES
SHURE
INSTALLED SOUND - MICROFLEX SERIES
The entire Microflex family of miniature condenser microphones are designed with performance, consistency and ease of
installation in mind. Their cardioid, super-cardioid and omni-directional condenser cartridges are completely interchangeable and fit every Microflex Gooseneck, Overhead, Boundary, and Lavalier model for the ultimate in convenience and uniform
sound. Plus, each Microflex model includes all the basic accessories needed for complete installation.
MX-391/392/393
Surface-Mount Microphone Models Include:
Surface-Mount Mics
MX391/C: Cardioid. Includes attached 12’
cable and separate in-line preamp,
phantom power only. Available in Black
(SHMX391C) or White (SHMX391WC) .............162.95
The low-profile
Microflex Series
boundary mics are
designed to be
unobtrusively placed
flat on a stage, table
top or wall while
offering high quality
audio for sound
reinforcement, boardrooms, broadcast or
recording. Available with interchangeable
cardioid, super-cardioid and omni-directional polar patterns in battery power,
phantom power or pigtail versions, giving
you the flexibility for any application.
MX391/S: Super-cardioid version of above.
Black (SHMX391S) or White (SHMX391WS)...173.50
MX391/O: Omni-directional version of
above. Available in Black (SHMX391O) or White
(SHMX391WO) ....................................................154.95
MX391BP/C (SHMX391BPC): Cardioid.
Battery/phantom power version of above.
Includes MX1BP power module.............179.95
MX391BP/S (SHMX391BPS): Super-cardioid
version of above..........................................186.50
MX391BP/O (SHMX391BPO): Omni-directional
version of above..........................................167.50
◆ 50Hz to 17kHz frequency response
MX391LP/C: Cardioid. Without MX1BP power
module. Uses Tini Q-G connector. Black
(SHMX391LPC) or White (SHMX391WLPC) ......104.95
◆ Easy to use paint mask for your custom-
color installations
MX391LP/S: Super-cardioid version of
above. Available in Black (SHMX391LPS) or White
(SHMX391WLPS) .................................................109.95
◆ Programmable silent membrane switch-
es with LED indicator can be set for Push
to Talk, Push to Mute or Push On/Push
Off modes (MX392 and MX393 only)
MX391LP/O: Omni-directional version of
above. Available in Black (SHMX391LPO) or
White (SHMX391WLPO) ......................................95.95
MX392/C (SHMX392C): Cardioid. Includes
programmable membrane switch with LED
indicator, built-in preamp, logic input/output
control capability, unterminated. Phantom
power only.....................................................207.95
MX392/S (SHMX392S): Super-cardioid version
of above..........................................................213.95
MX392/O (SHMX392O): Omni-directional
version of above..........................................194.95
MX393/C (SHMX393C): Cardioid. Includes
programmable membrane switch with LED
indicator, built-in preamplifier, detachable
cable terminates to a male XLR connector.
Phantom power only.................................207.95
MX393/S (SHMX393S): Super-cardioid version
of above..........................................................213.95
MX393/O (SHMX393O): Omni-directional
version of above..........................................194.95
MX-183/184/185 Lavalier Microphones
Three wired lavalier microphones no larger than a paper clip. Optional interchangeable mic cartridges allows
you to tailor the mics to any audio environment. The mics attach to the supplied power supply with the Shure
Tini Q-G connector. When the power supply is removed, they can be used with any Shure wireless transmitters.
◆ Condenser lavalier microphones
◆ Frequency Response 60 - 20 kHz
◆ Interchangeable cartridges for
◆ Includes both a pivoting single and
omni-directional, cardioid and
super-cardioid polar patterns
dual microphone tie clip
◆ Compatible with all Shure wireless
◆ Black, snap-fit foam windscreen
L AVA L I E R
transmitters
M I C R O P H O N E
◆ Available with belt-clip phantom
power only preamp and MX1BP
battery/phantom power preamp
◆ Attached 4´ cable with Tini Q-G
connector
M O D E L S
I N C L U D E
MX183 (SHMX183): Omni-directional condenser lavalier, belt-clip
preamp, rotatable tie clip, dual tie clip, snap-fit windscreen.....167.50
MX183BP (SHMX183BP): Omni-directional condenser lavalier
microphone with 4’ attached cable, MX1BP preamplifier ...........179.95
MX184 (SHMX184): Super-cardioid version of above .......................186.50
MX184BP (SHMX184BP): Super-cardioid version of above.............194.95
MX185 (SHMX185): Cardioid version of above....................................179.95
MX185BP (SHMX185BP): Cardioid version of above..........................192.50
PHOTO - VIDEO - PRO AUDIO
www.bhphotovideo.com
WIRED MICROPHONES
SHURE
623
INSTALLED SOUND - MICROFLEX SERIES
Gooseneck Microphones
Designed with premium audio quality and
ease of installation in mind, these miniature
condenser gooseneck microphones feature
swappable cardioid, super-cardioid and
omni-directional cartridge capability and
come complete with all the necessary
accessories. A variety of mounting options
make these mics suitable for any installation.
All models run on phantom power and have
a frequency response of 50Hz to 17kHz.
Gooseneck Microphone Models Include:
MX412/C (SHMX412C): 12” gooseneck,
terminates to XLR connector. Flange
mount. Cardioid .......................................186.50
MX412/S (SHMX412S): Super-cardioid
version of above.......................................192.50
MX412/N (SHMX412N): Same as above
without a cartridge..................................141.95
MX418/C (SHMX418C): 18” gooseneck version
of above. Cardioid ...................................186.50
MX418/S (SHMX418S): Super-cardioid version
of above ......................................................192.50
MX418/N (SHMX418N): Same as above
without a cartridge .................................129.95
MX-418
MX412D/C (SHMX412DC): 12” gooseneck with
desktop base, with programmable switch,
logic input and output terminals and
attached 10’ XLR cable. Cardioid ........243.95
MX-412
SWAPPABLE CARTRIDGES
R183B: Omni-directional. Black
(SHR183B) or White (SHR183W) ........38.95
R184B: Super-cardioid. Black
(SHR184B) or White (SHR184W) ........53.95
R185B: Cardioid. Black (SHR185B) or
White (SHR185W) ..............................47.50
MX412S/C (SHMX412SC): 12” gooseneck with
push-button mute switch and LED status
indicator. Terminates to male XLR
connector. Cardioid.................................199.95
MX412S/S (SHMX412SS): Super-cardioid
version of above ......................................207.95
MX412S/N (SHMX412SN): Same as above
without a cartridge .................................159.95
MX418S/C (SHMX418SC): 18” gooseneck
version of above ......................................199.95
MX418S/S (SHMX418SS): Super-cardioid
version of above).....................................207.95
MX418S/N (SHMX418SN): Same as above
without a cartridge .................................159.95
MX412SE/C (SHMX412SEC): 12” gooseneck
with attached 10’ XLR cable and inline
preamplifier, threaded flange mount
and shock mount adapter....................194.95
MX412D/S (SHMX418S): Super-cardioid
version of above ......................................249.95
MX412SE/S (SHMX412SES): Super-cardioid
version of above ......................................199.95
MX412D/N (SHMX418N): Same as above
without a cartridge .................................199.95
MX412SE/N (SHMX412SEN): Same as above
without a cartridge .................................154.95
MX418D/C (SHMX418DC) 18” gooseneck
version of above. Cardioid ...................243.95
MX418SE/C (SHMX418SEC): 18” gooseneck
version of above. Cardioid ...................194.95
MX418D/S (SHMX418DS): Super-cardioid
version of above ......................................249.95
MX418SE/S (SHMX418SES): Super-cardioid
version of above ......................................199.95
MX418D/N (SHMX418DN): Same as above
without a cartridge .................................199.95
MX418SE/N (SHMX418SEN): Same as above
without a cartridge .................................154.95
MX-202 Hanging Microphones
These phantom power only miniature hanging condenser mics feature the same
interchangeable capsule design as the rest of the Microflex series. Available with
either plate-mount or stand adapters ideal for use as overheads for live theatrical and
musical productions. The flexible 4” gooseneck allows you to unobtrusively aim the
mics exactly the way you want them.
HANGING MICROPHONE MODELS INCLUDE:
MX202/C: Cardioid microphone. 4” gooseneck with in-line
preamplifier and stand adapter. Available in Black (SHMX202BC) or
White (SHMX202WC) finish ..........................................................................167.50
MX202P/C: Cardioid microphone. 4” gooseneck with plate-mount
preamplifier and 30’ cable. Available in Black (SHMX202BPC) or White
(SHMX202WPC) finish .....................................................................................167.50
MX202/S: Super-cardioid version of above. Available in Black
MX202P/S: Super-cardioid version of above. Available in Black
(SHMX202BPS) or White (SHMX202WPS) finish...........................................173.50
(SHMX202BS) or White (SHMX202WS) finish...............................................173.50
MX202/N: Hanging mic without a cartridge. Available in Black
(SHMX202BN) or White (SHMX202WN) finish..............................................124.95
MX202BP/N: Hanging mic without a cartridge. Available in Black
(SHMX202BPN) or White (SHMX202WPN) finish..........................................124.95
(212) 444-6605 • 1-800-947-9905 • Quick Dial 91
PHOTO - VIDEO - PRO AUDIO
624
WIRED MICROPHONES
SHURE
MICROPHONE ACCESSORIES
A55M Isolation (Shock) Mount (SHA55HM)
Shock Stopper swivel
adapter/isolation mount that
reduces transmission of
mechanical noise and
vibration by more that 20dB.
For SM57, SM58, SM86, Beta
57A, Beta 58A, Beta 87C or
any Shure tapered handle mic....................38.95
A55HM Isolation (Shock) Mount (SHA55M)
Same as above, plus it has a patented design
that allows the microphone to be snapped in
and out without removing the cable. For
SM57, SM58, SM86, Beta 57A, Beta 58A, Beta
87C or any Shure tapered handle mic......44.95
A25D Stand
Adapter (SHA25D)
Break resistant adapter for
the SM57, SM58, SM87A,
Beta 87A and all other
mics with 3/4˝ and larger
handle .............................6.50
A26M Dual Microphone Mount (SHA25DM)
Dual microphone mount for 545 Series, SM57
and Beta 57A microphones ............................5.50
Quick-Release Shock Mounts
for Gooseneck Mics
These accessories allow
permanent installation
of a quick-release
shock mount for use
with a wide variety of
gooseneck mics.
A400SM (SHA400SM)
Offering Shock-Stopper construction, the
A400SM decouples the mic from the mounting
surface and reduces impact or surface noise
by up to 20dB .....................................................24.95
A400XLR (SHA400XLR)
Consists of an XLR-F connector and insert.
Existing A400SM Shock Mounts can be
retrofitted for quick release performance with
the A400XLR Connector/Insert ....................22.50
A400SMXLR (SHA400SMXLR)
An A400SM Shock Mount with the A400XLR
Connector/Insert ...............................................39.95
A99SMA Retrofit Adapter (SHA99SMA)
For the A400SM Shock Mount......................14.95
PHOTO - VIDEO - PRO AUDIO
MIC-SPECIFIC FOAM WINDSCREENS
For the 545 Series and SM57 (SHA2WSBK)
Locking black foam ........................................14.50
For the 545 Series and SM57 (SHA2WS)
Locking gray foam ..........................................14.50
For Beta 57 and Beta 57A (SHA57AWS)
Locking foam.......................................................7.50
For MX412 and 418 (SHRK412WS)
Contains four snap-fit screens....................18.95
Locking Foam for
Beta 57 and Beta 57A
For MX183, MX184 and MX185 (SHRK261BWS)
Contains four. Small, black ...........................17.50
Foam windscreens for
ball-type microphones
For MX183/184/185, WH30 (SHRK183WS)
Contains four black snap-fit screens........18.95
For SM86, SM87A (SHA85WS) .....................12.50
For SM93 (SHRK355WS) Set of 4, Black.......17.95
Gooseneck Windscreens
For Easyflex Gooseneck Mics (SHRPM310)
Charcoal Gray, 4 Pieces....................................6.50
For Easyflex Overhead Mics (SHRPM312)
Charcoal Gray, 4 Pieces....................................6.50
For Easyflex Overhead Mics (SHRPM314)
White, 4 Pieces....................................................6.50
High Performance Ball Foam Windscreen
(SHA99WS) For Microflex Gooseneck Mics...5.95
Locking Metal Windscreen (SHA412MWS)
For Microflex Gooseneck Mics....................19.95
Locking Black Foam for
545 Series and SM57
For MX412 and 418
Foam Windscreens for all
Shure Ball Type Microphones
Black Foam (SHA58WSBK) ....................................6.50
Blue Foam (SHA58WSBL) ......................................6.50
Gray Foam (SHA58WS) .........................................6.50
Green Foam (SHA58WSGN) .................................6.50
Red Foam (SHA58WSRD) ......................................6.50
Yellow Foam (SHA58WSYL) ..................................6.50
TIE CLIPS
Single Mount
Tie-Clips (SHRK183T1)
For the MX183/184/185.
Two pieces................32.95
Swiveling Lapel & Dual Tie Clips (SHRPM502)
For WL50 (two of each). Tan color .............39.50
Dual Mount Tie-Clip (SHRK183T2)
For the MX183, MX184 and MX185.............14.95
Black Swiveling Lapel Clips (SHRPM510)
For WL50 and Beta 53 (5 clips) ...................27.50
Double Tie Clips (SHRK307DB)
For SM93 (2 pc.) ................................................17.95
Tan Swiveling Lapel Clips (SHRPM512)
For WL50 and Beta 53 (5 clips) ...................26.50
Black Single Bar Tie Clips (SHRK354SB)
For SM93 (2 pc.) ................................................12.95
White Swiveling Lapel Clips (SHRPM514)
For WL50 (5 clips).............................................27.50
Swiveling Lapel & Dual Tie Clips (SHRPM504)
For WL50 (two of each). White color ........39.95
FOAM WINDSCREEN & CLIP PACKAGES
Tan Foam Windscreens
and Tie Clips (SHRK304T)
For SM93 (Contains two of each)...............24.95
www.bhphotovideo.com
Windscreens & Clothing Clip (SHRK318WS)
For all WH20 headsets. Contains two foam
windscreens and 1 clothing clip ...................5.95
WIRED MICROPHONES
SHURE
625
MICROPHONES ACCESSORIES
PROBLEM SOLVERS
STANDS
No matter how well you plan ahead, sooner or later you will probably run into an
audio-related problem. For example, eliminating the low end rumble picked up by a
sensitive mic due to handling noise or even automobile traffic. Shure has developed
a number of problem solving solutions to help you out in these types of situations
and many others.
Small Black Desk/Table Stand (SHA202BB)
For MX202 microphones ................................28.50
A96F Low- to Medium- Impedance
Matching Transformer (SHA96F)
A85F Economy Low- to High-Impedance
Mic Matching Transformer (SHA85F)
Low impedance, female XLR to medium
impedance 3.5mm mini-plug output
connector with 18” cable. Adapts a balanced,
low-impedance microphone to camcorder
recorder input. Also has a DC Bias Filter ..36.50
Provides 24dB of voltage gain and may be
used in reverse. Balanced 3-pin XLR female
input and 1/4” male output ..........................17.50
A95UF Low- to High-Impedance
Mic Transformer (SHA95UF)
Provides 24dB of voltage gain and may be
used in reverse (high- to low- impedance). It
has a balanced low-impedance 3-pin XLR-F
input and an Amphenol MC1M-type output
connector with a mating 1/4” male phone plug
and female phone plug adapters...............34.95
A95U Low- to High-Impedance
Mic Transformer (SHA95U)
Same as the A95UF, but with a 3-pin XLR male
low-impedance connector............................32.50
A15AS Switchable Mic Attenuator (SHA15AS)
Prevents preamplifier overload when strong
signals are applied. Provides 15, 20, or 25dB
of microphone attenuation. Requires use of
balanced signals; XLR-F in and XLR-M out.
Passes phantom power ..................................38.50
A15HP High-Pass Filter (SHA15HP)
Reduces unwanted low end rumble in
microphone signals. Provides low-end roll-off
of 12dB per octave below 100Hz. Slender,
in-line XLR (F) to XLR (M) configuration.
Requires use of balanced signals................38.50
A120S Accessory In-Line Switch (SHA120S)
Provides on/off, push-to-talk, cough button,
and transmitter relay keying functions for
wired mics. Convenient handheld size with
belt clip. For hardwired, in-line use with
various cable diameters.................................24.95
A15PRS Switchable
Phase Reverser (SHA15PRS)
A96F
Provides instant switch selection of normal or
reversed phase of a balanced line without
modification of equipment. Reverses polarity
of pins 2 and 3 of a balanced line. Slender,
in-line XLR (F) to XLR (M) configuration;
may be used in reverse. Requires use of
balanced signals...............................................38.50
A95U
A95UF
A85F
A15LA Line Adapter (SHA15LA)
A120S
A15HP
A15LA
Provides 50dB attenuation, allowing a
balanced line-level source to be connected to
a balanced microphone input. Slender, in-line
XLR (F) to XLR (M) configuration. Requires use
of balanced signals ..........................................34.95
A15BT Bridging Transformer (SHA15BT)
A15AS
Matches balanced or unbalanced devices of
different impedances. 33 kOhm primary: 600
or 7500 ohm secondary; may be used in
reverse ..................................................................39.95
Accessory Base (SHA412B)
For Microflex Gooseneck
microphones, 10’ attached
XLR cable......................59.50
Chrome Floor Stand (SHMS10C)
A chrome floor stand with gray metallic base,
the MS-10C quickly and easily adjusts from 35”
to 64” high ...........................................................39.95
Baby Boom Arm
for Chrome Floor Stand (SHBB77)
A 31” chrome-plated, adjustable boom that fits
the MS-10C Chrome Floor Stand...............29.95
Telescoping Mic
Floor Stand (SHS15A)
A rugged and stable,
yet portable and lightweight telescoping
tripod floor stand. It
features five telescoping
sections, adjustable
height between 3.5’
and 14’. It includes a
carrying case.........157.50
Desk Stand (SHS37A)
Provides a low profile,
stable base for
microphones with
swivel connector
assemblies, or
microphones using swivel adapters and shock
mounts. It has a non-reflective, textured, gray
finish ......................................................................26.95
Vibration-Isolation
Stand (SHS39A)
Provides excellent
shock isolation,
preventing floor or
table vibrations from
reaching a mounted mic. Use the S39A for
sportscasting, conference table or front-ofstage installations, or any application where
severe vibrations may occur .........................62.95
Tripod Desk Stand (SHS40B)
With three tripod-style folding legs. It is handy
for times that you need compact storage and
relative light weight, yet excellent stability.
Standard thread for microphone clip........19.95
(212) 444-6605 • 1-800-947-9905 • Quick Dial 91
PHOTO - VIDEO - PRO AUDIO
626
WIRED MICROPHONES
S O NY
ECM-44 / 55 / 66 / 77 / 88
Electret Condenser Lavalier Microphones
Sony’s lavalier microphones are manufactured to meet the most demanding professional broadcast and recording
requirements. They are designed to deliver the highest level of performance and reliability. There are five primary lavalier
mics in the series, offering different sizes and applications. Additionally, they offer three big advantages over other systems.
High Performance: Sony’s lavalier microphones are distinguished by their superior
performance, as represented by the wide (20Hz~20kHz) frequency response of the top-of-the-line
ECM-88. They will more than measure up to your expectations.
Wide Selection: The ECM-88 is an extremely miniature, omni-directional
mic designed
for quality-critical applications in broadcasting, theater, and field productions. While slightly
bigger, the ECM-77B is also incredibly small and light. The uni-directional ECM-66B is designed for
close-miking of musical instruments. The popular ECM-55B incorporates a 10.6mm omni-directional
capsule for versatility, while the ECM-44B offers high performance at a lower cost.
Reliability and Convenience:
Careful attention is paid to make the capsule
immune to external noise and adverse ambient conditions. The cable is strengthened to achieve
a high resistance to damage caused by over flexing.
ECM-44B Omni-directional Electret Condenser Mic (SOECM44B)
Delivering clean, bright, yet natural reproduction, the ECM-44B makes Sony’s exceptional condenser
mics available for budget conscious productions, and a variety of sound reinforcement requirements,
such as lectures and demonstrations. With in-line battery for powering via 48v phantom power or a
single AA battery (for over 5000 hours). Supplied with urethane windscreen and clip......................194.95
ECM44BC (SOECM44BC)
With a Sony SMC9-4P 4-pin
connector .............................99.95
ECM44BMP (SOECM44BMP)
With a 3-pole mini jack and
stable lock mechanism....99.95
ECM44BPT (SOECM44BPT)
With an unterminated cable for
custom installations.......108.95
ECM-55B (SOECM55B)
Omni-directional Electret Condenser Mic
The ECM-55B is suitable for news, interviews and stage dramas. Frequency response is a wide 30Hz
to 18 kHz. Directivity is optimized to ensure uniform, dependable output, regardless of the direction
of the sound source. The metal mesh windscreen effectively eliminates both wind noise outdoors
and pop noise in close-up situations. Complete with in-line battery for 2-way powering (battery or
48v phantom power). Supplied with metal windscreen and metal holder clips .................................CALL
Frequency Response
Dynamic Range
Signal-to-Noise Ratio
Max Input SPL
Battery Life
Output Impedance at 1kHz
PHOTO - VIDEO - PRO AUDIO
ECM-44B
ECM-55B
ECM-66B
ECM-77B
ECM-88
40 - 15k Hz
30 - 18k Hz
70 - 14k Hz
40 - 20k Hz
20 - 20k Hz
≥90dB
98dB
≥101dB
≥90dB
≥99dB
≥62dB
66dB
≥62dB
≥64dB
≥68dB
122dB SPL
126dB SPL
130dB SPL
≥130dB SPL
125dB SPL
Approx. 5000 hrs.
Approx. 5000 hrs.
Approx. 300 hrs.
Approx. 5000 hrs.
250Ω
100Ω
100Ω
150Ω
www.bhphotovideo.com
100Ω
WIRED MICROPHONES
S O NY
627
ECM-44 / 55 / 66 / 77 / 88
ECM-66B Uni-Directional Electret Condenser Mic (SOECM66B)
When superb rejection of ambient sound is desired, the ECM-66B yields clean, natural reproduction of
vocals or musical instruments while maintaining excellent isolation from the acoustic environment.
This miniature microphone has a uni-directional polar pattern, carefully contoured for better control
of feedback. The higher voltage supplied to the microphone by the built-in DC-to-DC converter
complements the electret condenser design, resulting in excellent transient response and thus better
tonal quality. Complete with in-line battery for 2-way powering (battery or 48v phantom power), and
a battery on/off switch to save power. An LED shows battery condition when the power is turned on.
ECM66BC (SOECM66BC): With a 4-pin connector ........................................................................................................Call
ECM-77B Omni-directional Condenser Microphone (SOECM77B)
Only 1/4” x 1/2” and a mere 0.04 oz., the microscopic ECM-77B offers increased mechanical impedance using a metal vaporized,
fine ceramic backplate to provide an exceptional 40Hz to 20kHz frequency response and to assure resistance to humidity and
temperature extremes. Combined with advanced techniques for sealing the capsule and acoustic housing, the ECM-77B delivers
sound that is audibly superior and more pleasing than other lavalier mics. Ideal for broadcasting and stage applications where
the mic must be inconspicuous, it enables unobtrusive miking plus also minimizes glare. Even when hidden inside a costume,
its frequency response is wide enough to pick up the voice with no perceptible change in quality, while minimizing the pick-up of rustling noise.
ECM77BC (SOECM77BC): With a 4-pin connector
for use with a bodypack transmitter......259.95
ECM77BMP (SOECM77BMP): With a 3-pole mini
jack and stable lock mechanism..............248.95
ECM77BPT (SOECM77BPT): Supplied without a
connector (pigtail) ........................................242.95
ECM-88B Omni-directional Condenser Microphone (SOECM88B)
An extremely miniature, omni-directional electret-condenser microphone for quality-critical
applications in broadcasting, theater, and field productions. It’s dual-diaphragm mechanism achieves
high-sensitivity, flat-and-wide frequency response and low noise characteristics. The diaphragm and
back-plates are fixed vertically to the microphone capsule, reducing the mechanical noise caused by
cable vibration and friction. Water-resistant architecture reduces the risk of water or perspiration
entering the mic capsule. The mic capsule measures just 5/32 x 5/32 x 11/16” allowing for easy, natural-looking concealment in a stage costume.
The ECM-88B includes a horizontal clip, a vertical clip, a double clip, a urethane windscreen and a Sony 4-pin connector (SMC9-4P) for use with the
supplied DC-78 power-supply or with the optional WRT-8B/822B wireless bodypack transmitters.
ECM88BC (SOECM88BC): With a 4-pin connector
for use with a bodypack transmitter. Does not
include the DC-78 power-supply ............339.95
ECM88PT: Supplied without a connector
(pigtail). Available in Black (SOECM88BPT) and
Beige (SOECM88FPT) ........................334.95/279.95
DC Power Supply Unit (SODC78)
Designed for use with the ECM-88, the DC-78
is powered via an AA alkaline battery or an
external DC (12-48v) power supply. Has an XLR
output...................................................................84.95
ECM-88 Microphone
Accessory Kit (SOADKIT88B)
Includes two types of microphone holders
(double-pin and tie-clip), a holder adapter for
dual-microphone operation, plus six urethane
windscreens (red, yellow, green, blue, gray,
and black).........................................................148.95
Tie Clips and Windscreens for Sony Lavalier Mics
Misc. 6-packs of Clips for the ECM-88B
Vertical Lavalier (Single ) Tie Clips
Safety Mic Clips (SOSADS88B) ............................149.95
For ECM-77B (SOSADV77B): Set of 10 ..........129.95
Dual Holder Adapter (SOSADW88B) ..................74.95
For ECM-88 (SOSADV88B): Set of 10.............159.95
Horizontal/Vertical Tie Clip (SOSAD88B).....134.95
Horizontal Lavalier (Single) Tie Clips
For the ECM-44B (SOSC44) ...............................16.95
For the ECM-44B (SOSADH44B): Set of 6.......99.95
For the ECM-55B (SOSADH55B): Set of 6.......99.95
For the ECM-77B (SOSC77) ...............................14.95
For the ECM-77B (SOSADH77B): Set of 6....139.95
For the ECM-88 (SOSADH88B): Set of 10.....159.95
Urethane Windscreens
Black for ECM-44 (SOWS44) ..............................11.95
Black for ECM-44 (SOADR44B): Set of 6 ..........99.95
Black for ECM-66 (SOADR66B): Set of 6 ..........79.95
Black for ECM-77 (SOWSU77S) ............................9.95
Black for ECM-77 (SOADC77B): Set of 12........99.95
Color for ECM88 (SOADC88): Set of 6 ...........134.95
Black for ECM88 (SOADR88B): Set of 12 .......118.95
Horizontal Lavalier (Double) Tie Clips
Metal Mesh Windscreens
For ECM-77B 6-pack (SOSADW77B) ..............119.95
Black for ECM-77 (SOWSM77S) .........................19.95
For ECM-88 6-pack (SOSADW88BL)...............149.95
Black for ECM-77 (SOADR77B): Set of 6 ..........94.95
(212) 444-6605 • 1-800-947-9905 • Quick Dial 91
PHOTO - VIDEO - PRO AUDIO
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement