Universal Remote Control Remote control HCCUR Specifications

Universal Remote Control Remote control HCCUR Specifications
Home Automation
Products —
Decora Home
Controls (DHC)
Leviton’s Decora Home Controls (DHC) Residential Powerline
Carrier components provide homeowners with everything
needed for programmed and manual control of lighting and
appliances using their home's existing AC wiring.
Our current listing of DHC components features new programmers, controllers and receivers with Scene Lighting Capability
for coordinated, whole-house lighting control. This includes
models offering two-way communication, which enables
controllers in remote locations to show the On/Off status of
individual lighting loads. Many new DHC components feature
Intellisense™, a Leviton exclusive technology. Intellisense
reduces noise sensitivity without reducing command signal
sensitivity, resulting in the most reliable performance of any
powerline carrier home automation system available today.
DHC POWERLINE CARRIER
COMPONENTS
DHC RECEIVERS
Overview __________________B1
DHC TRANSMITTERS
Basic Programmer __________B2
Table Top Controller _________B2
Toscana™ Deluxe
Programmer _______________B2
Wall Switch Controllers ___B3, B4
Wall Switch Controllers
with Scene Capability________B4
Universal Remote Controller __B5
Plug-in Transceiver _________B5
Key Chain Remote Controller _B5
Outdoor Passive Infrared
Transmitter ________________B6
Photocell Controller _________B6
Burglar Alarm Interface ______B7
Dry Contact Controllers ______B7
Wall Switches with
Scene Capability___________B10
Wall Switches _________B11, B12
Remote Switches __________B13
Double-Pole 20A
Wall Switch _______________B13
Rocker and Frame
Color-Change Kits _____B10–B13
Universal Low-Voltage
Module___________________B14
Plug-In Lamp Module _______B14
Wall Receptacles __________B15
Fixture Modules ___________B16
Power Extenders __________B16
DHC ANCILLARY DEVICES
Couplers and Filters________B17
Signal Strength Indicator____B17
DHC NETWORK INTEGRITY
PRODUCTS
System Amplifier/
Coupler/Repeater ___________B8
Panel-Mounted Surge
Protective Devices __________B9
S E C T I O N
B
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Residential Grade
Features and Benefits
■ A network of controllers and DHC switch, dimmer, fixture and receptacle receivers that
communicate via unique coded switching signals over a home’s AC wiring to automate
control of lights and appliances
■ DHC components replace switches and outlets, which simplifies installation compared
with other automation systems that require dedicated proprietary wiring backbones.
■ An effective way to contribute to energy conservation and
extend bulb and appliance life
Photocell Controller
#6308
■ Offers significant security benefits to today’s
homeowner, including programmed
automatic and manual home
security features
Receptacle Receiver #6227
Panic Button
Controller
#HCC1A-1TW
Toscana Programmer
#HCCPG-1TW
Seven-Scene
Dimming
Controller
#HCCS7-1TW
Motion Sensor
#6417
Key Chain Remote Controller
#HCCKR
Switch Receivers #6291,
6293, 6381, HCM10-1TW,
HCM06-1TW, HCS10-1SW
Plug-in Transceiver
#HCPRF
System
Amplifier/Repeater
#HCA02-10E
Burglar Alarm
Interface
#6330
Enjoy Outstanding Home Automation Capabilities with Easy-to-Install,
Decora Home Controls
DHC Controllers
B1
DHC Receivers
Network Integrity Products
DHC Controllers send control
signals to user-specified
DHC address throughout the
network. Offering includes
wall-mounted programmable,
plug-in, tabletop, wireless
hand-held, wall switch/
dimmer and sensor units,
plus models with 2-way
communication.
DHC Receivers can
be set to any of 256
DHC address codes
for remote/manual
control of incandescent, inductive,
fluorescent, or lowvoltage loads. They
are available as
receptacle, plug-in,
fixture and multilocation wall switches
and dimmer switches.
Leviton highly recommends installing these
products in every
DHC application.
The System
Coupler/Repeater
ensures DHC signal
integrity throughout
the house. Panelmount surge devices
protect DHC components from transient
voltage surges.
Cat. No. HCCS7-1TW
Cat. No. HCM10-1SW
Cat. No. 51120-1
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Home Automation Products
Residential Grade
DHC Powerline Programmers/Controllers
DESCRIPTION
CAT. NO.
Toscana™
Deluxe Programmer — A powerful home automation controller that provides one-touch access to up to 64 deluxe lighting scenes and direct remote control
of up to 256 devices. Deluxe scenes can control up to 256 addresses to preset levels
when used with HCS08-1TW, HCS10-1TW, HCM06-1TW and HCM10-1TW
receivers. All other DHC receiver s can be included in deluxe scenes as ON/OFF
loads. Use HCCS7-1TW as a remote to activate deluxe scenes. Toscana features
2-way communication to confirm locally initiated status changes on receivers with
2-way capability. It allows up to 64 timed events (appliances ON/OFF, lights
ON/OFF/DIM /BRIGHT) including lights ON/OFF at dusk/dawn based on an astronomical clock. Permits input of real-named devices (e.g. “wall sconce”) instead of
device code (e.g. “B5”). Individual timed events or up to 3 groups of timed events
can be run on a recurring basis. Built-in learning infrared receiver can learn up to16
button commands from any standard IR remote and trigger lighting events.
Permanent memory feature guaranteed 20-year life. All PC software and Toscana
upgrades provided for life. Mounts on standard 4-gang box. Shipped with white
frame and white cover. Color changes kits available for other colors.
Rated: 120V 60Hz AC only. Power Consumption: 3 Watts
COLOR CHANGE KITS FOR TOSCANA
HCCPG-1TW
HCCPG-1TW
Cat. No.
Ivory Cover/Ivory Frame
Cat. No.
White Cover/White Frame
Cat. No.
Almond Cover/Almond Frame
Cat. No.
Smoke Cover/White Frame
DCKPG-0II
DCKPG-0WW
DCKPG-0AA
DCKPG-0SW
1
5
2
9
3
6
3
4
7
0
1
1
4
8
1
1
1
AL
NU
MA
5
2
1
1
ER
OLL
NTR
CO
1
N
O
6
B
O
M
O
A
H
F
IG
F
C
K
R
I
T
A
E
G
D
TS
H
G
LI N
LL O
IM
A
TS
H
G
LI
FF
LL O
Table Top Controller★— Provides manual remote control for all 256 DHC
addresses. Command functions include ON/OFF, ALL LIGHTS ON/ALL OFF and
DIM/BRIGHTEN. The 6320 plugs into any 120 volt AC receptacle to transmit
command signals over existing AC wiring.
Rated: 120V 60Hz AC only.
6312-I
6320
Basic Wall Mounted Programmer — A powerful home automation controller that is
easy to install and use. Compact, low-profile unit fits in single-gang wallbox. Accepts
up to four addresses; maximum two ON and two OFF commands per address.
SECURITY mode randomly selects ON and OFF times to make an empty home
appear occupied. ALL LIGHTS ON switch acts as a panic-button lighting system,
switching on all DHC switch modules with one touch. DIM/BRIGHTEN command
can automatically adjust lighting levels of all fixtures controlled by DHC dimming
receivers. LED readout shows time and program status; battery back-up protects
clock setting and program status for ten hours during power interruption.
Available in Ivory, White, and Almond.
Rated: 120V 60Hz AC only Power Consumption: 2.5 watts maximum
SPECIFICATIONS & FEATURES
1
2
3
4
A
BRIGHT LIGHT
ON
E
M
I
OFF
DIM
UNIT
TIME
CLEAR
SECURITY
®
6312-I,-W, -A
1.38
(35.1 mm)
All devices are UL Listed. Also CSA Certified except where indicated by★
1.71
(43.5 mm)
TESTING & CODE COMPLIANCE
Note: A Cat. No. HCA02-10E System
Amplifier must be installed in all panels
in every DHC installation to ensure
adequate signal strength.
UL Listed (File #E-66800)
CSA Certified (File #LR-54628)
NOM Certified (#057)
UL 224A Tested (and others as appropriate)
0.95
(24.1 mm)
Colors available as listed: Ivory (-I), White (-W),
Almond (-A). See chart for Toscana color change kits.
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
BASIC WALL MOUNTED PROGRAMMER—Cat. No. 6312
2.41 (61.2 mm)
2.25 (57.2 mm)
4.45 (113.0 mm)
8.80 (223.5 mm)
TABLE TOP CONTROLLER—Cat. No. 6320
2.69 (68.3 mm)
1.64
(41.7 mm)
4.73 (120.1 mm)
5.87 (148.1 mm)
•
•
•
•
COLOR
2.72 (68.8 mm)
4.52 (114.9 mm)
5.51 (140.0 mm)
• Programmer adds user-devised scheduling to
DHC automated control of lights and appliances for greater convenience, energy savings
and security
• Programmer and Controllers send DHC
switching commands over existing 60Hz
120V AC house wiring.
• Backed by a Limited Two-Year Warranty
1.95
(49.5 mm)
2.34
(59.4 mm)
TOSCANA CONTROLLER—Cat. No. HCCPG-1TW
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
B2
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Residential Grade
Home Automation Products
DHC Powerline Carrier Wall Switch Controllers
with 2-Way Communication
HCC10-1TW in 80301-W
DESCRIPTION
CAT. NO.
One-Address ON/OFF Controller — One ON/OFF rocker transmits ON/OFF
commands to one address. Illuminated green LED at bottom of face indicates
unit is On. (Note: Shipped in White only. Order color change kit for Ivory and
Almond)
HCC10-1TW
ALL LIGHTS ON/ALL OFF Controller — One ALL LIGHTS ON/ALL OFF
rocker transmits commands to all receivers set to the same letter code as this
transmitter. Provides “Panic Button” lighting control for safety and security.
NOTE: Receptacle receivers and Universal Low-Voltage Module (6337) will
not respond to ALL ON command. Illuminated green LED at bottom of face
indicates unit is On. (Note: Shipped in White only. Order color change kit for
Ivory and Almond)
HCC1A-1TW
One-Address Dimming Controller — One ON/OFF rocker transmits
ON/OFF commands to one address in the same letter code group as this
transmitter switch while the built-in arrow-shaped rocker transmits
BRIGHT/DIM commands to that same address. Illuminated green LED at
bottom of face indicates unit is On. (Note: Shipped in White only. Order color
change kit for Ivory and Almond)
HCC1D-1TW
Two-Address Dimming Controller — Two sets of ON/OFF buttons transmit
ON/OFF commands to two sequential addresses in the same letter code group
as this controller. One set of BRIGHT/DIM buttons transmits BRIGHT/DIM
commands to the most recently selected address. (Note: Shipped in White
only. Order color change kit for Ivory and Almond). See page B4 for dimensional drawing of HCC2D-1TW.See page B4 for dimensional drawing of
HCC2D-1TW.
HCC2D-1TW
All devices are UL Listed and CSA Certified.
HCC1D-1TW in 80301-W
No more than 4 Controllers should be installed on a single branch circuit.
2.38 (60.5 mm)
1.73 (43.9 mm)
SPECIFICATIONS & FEATURES
1.38
(35.8 mm)
2.70
4.11 (104.9 mm)
• Fit in standard wallboxes and replace regular
switches to provide DHC control capability as
indicated in “Description”
• 2-Way Communication allows status of
receivers changed manually to be reflected in
the controller and allows computer-based
controllers to register a status update
• Exclusive Intellisense™ technology for transmitting clear command signal without noise
interference
• Uses existing 120V AC 60Hz wiring to send
command signals
• Compatible with Decora screwless and
standard Decora wallplates
• Green LED illuminates to confirm ON command is sent
• Decora styling coordinates with Leviton’s
popular Decora line; complements any
interior
• Backed by a Limited Two-Year Warranty
1.67
(42.5 mm)
DHC CONTROLLER
Cat. Nos. HCC10-1TW and HCC1A-1TW
TESTING & CODE COMPLIANCE
2.38 (60.3 mm)
• UL Listed (File #E-66800)
• CSA Certified (File #LR-54628)
• UL 224A Tested (and others as appropriate)
1.67
(42.5 mm)
COLOR
Note: A Cat. No. HCA02-10E System
Amplifier must be installed in all panels
in every DHC installation to ensure
adequate signal strength.
B3
2.70
2.62 (166.6 mm)
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
4.11 (104.4 mm)
All devices are shipped in White only. See page B4 for
compatible color change kits.
DHC CONTROLLER
Cat. No. HCC1D-1TW
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Home Automation Products
Residential Grade
DHC Powerline Carrier Wall Switch Controllers
with 2-Way Communication
DESCRIPTION
CAT. NO.
Three-Address Dimming Controller — Three sets of ON/OFF buttons
transmit ON/OFF commands to three sequential addresses in the same letter code
group as this controller. One set of BRIGHT/DIM buttons transmits BRIGHT/DIM
commands to the most recently selected address.
(Note: Shipped in White only. Order color change kit for Ivory and Almond)
HCC3D-1TW
Four-Address Dimming Controller — Four sets of ON/OFF buttons transmit
ON/OFF commands to four sequential addresses in the same letter code group as
this controller. One set of BRIGHT/DIM buttons transmits BRIGHT/DIM commands
to the most recently selected.
(Note: Shipped in White only. Order color change kit for Ivory and Almond)
HCC4D-1TW
Three-Address Dimming, ALL LIGHTS ON/ALL OFF Controller — Three sets
of ON/OFF buttons transmit ON/OFF commands to three sequential addresses in
the same letter code group as this controller. One set of BRIGHT/DIM buttons
transmits BRIGHT/DIM commands to the most recently selected address. One set
of ALL LIGHTS ON/ALL OFF buttons transmits commands to all receivers set to
the same letter code as this transmitter. Receptacle receivers and Universal
Low-Voltage Module (6337) will not respond to ALL ON command.
(Note: Shipped in White only. Order color change kit for Ivory and Almond)
HCC4A-1TW
Seven-Scene Dimming Controller — Each of seven SCENE buttons transmits
ON commands to preset levels to 12 sequential addresses in the same letter code
group as this controller. (Note: 12-address sequence continues at address 1 if
address 16 is reached before all 12 sequential addresses are completed.) For use
with Scene Capable Receivers only: HCM10 (6343), HCM06 (16383), HCS10,
HCS08, and HCP03. One set of SCENE BRIGHT/DIM buttons transmits SCENE
BRIGHT/DIM commands to the most recently selected scene. One OFF button
transmits OFF command to the most recently selected scene.
(Note: Shipped in White only. Order color change kit for Ivory and Almond)
HCCS7-1TW
HCC4A-1TW in 80301-W
The HCCS7-1TW utilizes extended code format. This command structure is compatible with Cat. No. HCA02-10E DHC
System Amplifier/Coupler /Repeater but is not compatible with the older version of the System Amplifier Cat. No. 6201.
All devices are UL Listed and CSA Certified.
No more than 4 Controllers should be installed on a single branch circuit.
1
2
SCENE 3 SCENE 4
2.69
(68.2 mm)
3.28 (83.3 mm)
4.40 (112.0 mm)
1.40
(35.5 mm)
SCENE 5 SCENE 6
SCENE 7
OFF
HCCS7-1TW in 80301-W
SPECIFICATIONS & FEATURES
• Fit in standard wallboxes and replace regular
switches to provide DHC control capability as
indicated in “Description”
• 2-Way Communication allows status of
receivers changed manually to be reflected in
the controller and allows computer-based
controllers to register a status update
• Exclusive Intellisense™ technology for transmitting clear command signal without noise
interference
• Uses existing 120V AC 60Hz wiring to send
command signals
• Compatible with Decora screwless and standard Decora wallplates
• Green LED illuminates to confirm ON command is sent
• Decora styling coordinates with Leviton's popular Decora line; complements any interior
• Backed by a Limited Two-Year Warranty
TESTING & CODE COMPLIANCE
1.76
(45.0 mm)
• UL Listed (File #E-66800)
• CSA Certified (File #LR-54628)
• UL 224A Tested (and others as appropriate)
1.60
(40.6 mm)
DIMENSIONS FOR ALL DHC CONTROLLERS ON THIS PAGE (ALSO CAT. NO. HCC2D-1TW)
Cat. No. HCCS7-1TW Shown
COLOR CHANGE KITS
For Controller:
Compatible Color Change Kit
Cat. No. White
Cat. No. Ivory
HCC10-1TW, HCC1A-1TW
DRK0S-0LW
DRK0S-0LI
Cat. No. Almond
DRK0S-0LA
HCC1D-1TW
DRK1D-00W
DRK1D-00I
DRK1D-00A
HCC2D-1TW
DCK2D-00W
DCK2D-00I
DCK2D-00A
HCC3D-1TW
DCK3D-00W
DCK3D-00I
DCK3D-00A
HCC4A-1TW
DCK4A-00W
DCK4A-00I
DCK4A-00A
HCC4D-1TW
DCK4D-00W
DCK4D-00I
DCK4D-00A
HCCS7-1TW
DCKS7-00W
DCKS7-00I
DCKS7-00A
COLOR
All devices are shipped in White only. See chart for
compatible color change kits.
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
Note: A Cat. No. HCA02-10E System
Amplifier must be installed in all panels
in every DHC installation to ensure
adequate signal strength.
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
B4
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Residential Grade
Home Automation Products
DHC Wireless Remote Control Components
DESCRIPTION
HCPRF-1TW & HCCUR
HCCKR-E
SPECIFICATIONS & FEATURES
• Leviton's Universal Remote Control works
with DHC-controlled lighting and appliances
as well as audio/video system components
• Ultra-compact Key Chain Remote adds to
home security by allowing users to turn ON
lighting as they approach entranceway,
garage or driveway
• Plug-In Transceiver features Intellisense™
Technology for optimum reliability, 2-way signaling capability, and easy one-button programming. Must be used with Universal
Remote and Key Chain Remote.
• Backed by a Limited Two-Year Warranty
CAT. NO.
Universal Remote Control — Hand-held wireless remote control sends
RF (radio frequency) command signals to DHC Plug-In Transceiver
Cat. No. HCPRF for up to 256 DHC addresses. With an operating range of
up to 100 ft. through wall and ceilings, it sends ON/OFF, DIM/BRIGHT and ALL
ON/ALL OFF commands for lighting and ON/OFF commands for appliances.
The Universal Remote will also control audio and video equipment, including
TV’s, VCR’s, cable boxes, satellite receivers, DVD and CD players and more.
Functions as an all-in-one controller for lighting and audio/video systems,
making it ideal for home theaters. Universal design also makes it suitable for
the elderly and physically challenged. Dual built-in timers can shut off TV
and/or DHC devices up to ninety minutes after setting. Uses 2 AAA batteries.
Must be used with HCPRF Transceiver. Color: Black. Replaces Cat. No. 6313
HCCUR
Plug-In Transceiver — Accepts RF DHC commands from the Universal
Remote Cat. No. HCCUR for ON/OFF, DIM/BRIGHT and ALL ON/ALL OFF,
as well as ON/OFF commands from the Key Chain Remote Cat. No. HCCKR.
The Plug-In Transceiver works with all DHC receivers by re-transmitting
commands signals onto the home’s existing electrical wiring. Plugs into any
standard receptacle and provides a built-in outlet for ON/OFF switching of
incandescent lamps rated 300W max. @ 120V AC. The lamp can be controlled
remotely or locally via the programming button on the face of the Transceiver,
which can also be used to change the unit's DHC address. Features
Intellisense™ Technology to ensure optimum system performance. 2-Way
communication permits local status of attached lamp to show on all 2-Way
capable DHC controllers. Multiple HCPRF Transceivers can be used to
increase coverage in large homes. Unit will re-transmit commands for up 256
DHC addresses. Color: White. Replaces Cat. No. 6314-W
HCPRF-1TW
Key Chain Remote Controller — Designed to fit on a key chain and send
RF (radio frequency) command signals to DHC Plug-In Transceiver
Cat. No. HCPRF. With an operating range of up to 75 ft. through wall and
ceilings, it sends ON/OFF commands for any 2 sequential DHC addresses
(addresses are user programmable). Ideal for control of home lighting from a
vehicle when entering garage or driveway. Uses long-life 3V CR2032 lithium
battery (included). Must be used with HCPRF Transceiver. Color: Black.
Replaces Cat. No. 6332
HCCKR-E
Note: Cat. No. HCCUR is CSA Certified only. Cat. No. HCPRF-1TW is
UL Listed, CSA Certified and NOM Certified. UL and CSA not required for
Cat. No. HCCKR-E
TESTING & CODE COMPLIANCE
•
•
•
•
UL Listed (File #E-66800)
CSA Certified (File #LR-69519)
NOM Certified (#057)
UL 224A Tested (and others as appropriate)
COLOR
Colors available as listed.
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
B5
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Home Automation Products
Residential Grade
DHC Powerline Carrier Controllers
DESCRIPTION
CAT. NO.
Passive Infrared Controller — A motion-sensing light control ideal
for use in outdoor locations, such as backyards, garages and storage
buildings. Built-in infrared sensing technology monitors 4,000-sq. ft.
field, 110 degrees wide, up to 40 feet in front of unit. When the 6417
senses motion in its field of view, it can respond by sending two types
of signals: ON commands to Receivers set to control lights at four
sequential system addresses, and MOTION DETECTED signals to
other 6417’s set to the same address. As long as the source of
infrared radiation remains in the 6417 sensor field, it continues to send
ON signals every six seconds to these addresses, providing the
convenience of continuous illumination along a path from a garage to
an entranceway, or around an entire residence, if desired. It can also
turn on an inside lighting fixture as well as outdoor fixtures to help
deter intruders.
The 6417 is encased in a moisture-resistant housing. The control
panel includes sensitivity adjustments to prevent nuisance tripping by
small animals and a time delay to set the length of time the lights stay
on (6 seconds to 30 minutes). Manual override of the 6417 controller
can be achieved with the use of an HCC10-1TW Controller.
Passive Infrared Transmitter installs easily into standard round outdoor junction box and comes complete with mounting plate, control
unit, par lampholders and complete installation and operating
instructions. Color: Brown.
6417
6417
Photocell Controller — Automatically senses approaching darkness
and responds by sending ON commands to as many as four groups
of DHC Receivers (all receiver modules in each group must be set to
the same Letter Code). The Receiver Modules respond by turning
lights ON inside or outside the home. The 6308 will also transmit OFF
commands in response to a user-selected number of hours that it’s
been ON, or in response to approaching daylight. The Receivers
respond by turning their assigned lighting loads inside or outside the
home OFF. The 6308 mounts on a standard round or GEM electrical
box. Color: Gray.
6308
SPECIFICATIONS & FEATURES
6308
All devices are UL Listed only, not CSA Certified.
• DHC Passive Infrared Sensor/Transmitters
can work alone or in multiple arrays to turn on
designated lighting inside and outside the
home when motion is detected for improved
security and safety
• Up to four transmitters can be wired into a
single branch circuit
• Photocell Sensor/Transmitters can add
“night watchman” automated switching
capability to any DHC network
• Backed by a Limited Two-Year Warranty
TESTING & CODE COMPLIANCE
1.18 (45.9 mm)
• UL Listed (File #E-66800)
• NOM Certified (#057)
• UL 224A Tested (and others as appropriate)
3.28 (83.31 mm)
CODE
DIALS
COLOR
Colors available as listed.
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
BACK-WIRE HOLES
0.61
(15.4 mm)
4.48 (113.9 mm)
PHOTOCELL TRANSMITTER
Cat. No. 6308
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
B6
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Residential Grade
Home Automation Products
DHC Powerline Carrier Controllers
DESCRIPTION
CAT. NO.
Burglar Alarm Interface — Simply plugs into a grounding 15 Amp receptacle.
Connects to an existing intrusion alarm and turns lights ON whenever the alarm
is tripped. Provides choice of 3 modes of light switching when activated. Either a
low-voltage input (6-18V AC, DC or audio) or a dry contact closure can trigger
the 6330. The unit has a test button that permits activation whether or not the
device is connected to an alarm system. The ALL OFF button turns OFF anything that was turned ON by the unit. Available Color: Ivory.
TE
ST
UN
IT
CO
13
1
9
5
M
DE
HO
A
AL
L UN
IT
OF
F
E
US
®
E CO
INPU
AB T
DE
MO
1 2 DE
3
6330
6330
Dry Contact Controllers★— Allow monitoring of up to four dry contact closures.
No. 6315 Maintained Contact Transmitter sends ON or OFF command signals in
response to contact opening or closure. No. 6316 Momentary Contact
Transmitter sends ON or OFF command signals in response to contact closure,
and no command signal upon contact openings. These units can be used with
photocells, infrared sensors, security system, motion sensors, and any other
dry-contact-based sensors. Installs in a single-gang wallbox. Color: Ivory.
Power to control side: 125V 60Hz AC Only.
LV LEAD COLOR
TRANSMITS TO
Blue
A1*
Orange
A2*
Yellow
A3*
Brown
A4*
*Or any four sequential address codes within the same Letter Code group
1
A
E
M
I
5
13
9
6315, 6316
as the Transmitter.
All devices are UL Listed. Also CSA Certified except where indicated by★
6315, 6316
SPECIFICATIONS & FEATURES
E
I
13
5
2.63 (66.8 mm)
1
A
M
4.06 (103.1 mm)
BLACK
2.75 (69.8 mm)
• Burglar Alarm Interface connects to existing
intrusion alarms, issuing flashing light
commands to DHC switching modules when
tripped for improved security
• Up to four transmitters can be wired into a
single branch circuit
• Dry Contact Transmitters link signaling from
photocells, infrared sensors, security systems, motion sensors, and other dry contact
transmitters to DHC controlled devices
• Backed by a Limited Two-Year Warranty
9
WHITE
TESTING & CODE COMPLIANCE
•
•
•
•
UL Listed (File #E-66800)
CSA Certified (File #LR-54628)
NOM Certified (#057)
UL 224A Tested (and others as appropriate)
COLOR
Colors available as listed.
.44
.94
(11.2 mm)
(33.3 mm)
1.88
1.75
(47.8 mm)
(44.5 mm)
MAINTAINED DRY CONTACT TRANSMITTERS
Cat. No. 6315 & 6316
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
2.20
(55.9 mm)
TEST
UNIT OFF
1
A
13
3.57 (90.7 mm)
1.55
(39.5 mm)
5
M
E
9
UNIT CODE
HOUSE CODE
®
BURGLAR ALARM INTERFACE
Cat. No. 6330
B7
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Home Automation Products
Residential Grade
DHC Network Integrity Products
DESCRIPTION
CAT. NO.
COMPU
IIFX
MAC
A NEW
UL
NEEDS
R
T WEISS
STUAR
B
6201
0V
120/24 r?
Coupleer
Repeat
A
N
0V
120/24
System
, 15 A
2-Pole Breaker
Circuit
TER
System Amplifier/Coupler/Repeater with Built-in Test signal Generator—
Performs a variety of functions to ensure outstanding DHC system performance and reliability. Couples transmitter (programmer and controller)
signals generated on the 120V leg where the transmitter draws power onto the
other leg in a 120/240V single-phase 3-wire residential wiring system. The
HCA02-10E also amplifies and repeats command signals to maintain proper
signal strength through the DHC system. Green pilot light indicates unit has
power. Lamp will indicate when signal is being transmitted. Features
Intellisense™ Technology to help ensure top performance even when noise is
present on the AC powerline. The error lamp indicates the Intellisense feature
is activated. The unit provides convenient test signal transmission for easy
signal strength verification at individual DHC module locations using Leviton’s
Cat. No. 6386 Signal Strength Indicator.
HCA02-10E
HCA02-10E
The HCA02-10E should be installed at the main panel on its own dedicated
15A breaker in accordance with NEC requirements. The HCA02-10E cannot
be used in a 3-phase system.
The 6201 should be installed at the main panel on its own dedicated 15A
breaker in accordance with NEC requirements. The 6201 is designed for
use in a 3-phase 120/208V residential system.
TER
COMPU
IIFX
MAC
A NEW
UL
NEEDS
R
6201
6201
Note: A System Amplifier must be installed in all panels in every DHC
installation to ensure adequate signal strength.
SPECIFICATIONS & FEATURES
• Cat. No. HCA02-10E System
Amplifier/Coupler/Repeater must be installed
in all DHC installations to ensure adequate
signal strength.
• Use Cat. No. 6201 System Amplifier for
3-phase 120/208V applications (not compatible with HCCS7-1TW Scene Controller).
• Backed by a Limited Two-Year Warranty
3.08 (78.1 mm)
2.79 (70.9 mm)
*Cat. No. 6201 is not compatible with HCCS7-1TW Scene Lighting Controller
All devices are UL Listed and CSA Certified
TESTING & CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR3413)
• UL 244A Tested (and others where
applicable)
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V-2 Rating
Operating Temperature: -40°C to 120°C
4.49 (113.9 mm)
1.64
(41.7 mm
T WEISS
STUAR
, 15 A
2-Pole Breaker
Circuit
0V
120/24
System
N
A
B
System Amplifier*— Couples transmitter (programmer and controller) signals
generated on the 120V leg where the transmitter draws power onto the other
leg in a 120/240V system or any phase of a 3-phase 120/208V residential
wiring system. Pilot light indicates DHC signal is transmitting. Use Cat. No.
HCA02-10E in installations requiring Intellisense™ noise immunity.
6201
0V
120/24 r?
Couple
Repeater
Note: A Cat. No. HCA02-10E System Amplifier must be installed in all
panels in every DHC installation to ensure adequate signal strength.
4.77 (121.2 mm)
SYSTEM AMPLIFIER/COUPLER/REPEATER
Cat. No. HCA02-10E
3.08 (78.2 mm)
2.79 (70.9 mm)
PILOT LIGHT
4.49 (114.0 mm)
1.64
(41.7 mm)
4.77 (121.2 mm)
SYSTEM AMPLIFIER
Cat. No. 6201
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
B8
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Residential Grade
Home Automation Products
DHC Network Integrity Products
Panel Mounted Surge Protective Devices (SPD) — Provides homes with protection from high-energy
transient voltage surges that can damage sensitive electronic circuits in computers, audio and video
components and electronic appliances. DHC components incorporate micro circuitry and Leviton highly
recommends protecting the DHC network from powerline surges. Leviton Panel Mount devices feature
unique hybrid suppression circuitry for outstanding surge protection. The following devices are compatible
with all DHC components.
51110-PTC
Description
Cat. No.
Max. Surge Current L-N
(8 x 20µs wave)
UL 1449
Rating L-N
120/240V AC, Single-Phase. Standard J-box metal
enclosure with pre-punched standard knockouts.
51120-1
50kA
500V
120/208V AC, 3-Phase WYE. Standard J-box metal 51120-3
enclosure with pre-punched standard knockouts.
50kA
500V
120/240V AC, Single-Phase. NEMA 3R enclosure
suitable for outdoor use
51120-3R
50kA
800V
120/240V AC, Single-Phase. Features sine wave
tracking, redundant protection and replaceable
surge modules. NEMA 12 enclosure with
hinged cover.
52120-M2H
100kA
400V
120/240V AC, Single-Phase Multimedia Panel.
Provides surge protection for AC powerline,
2-pairs of phone/fax/modem connections, and
dual CATV/Satellite feeds using F connectors.
Painted steel NEMA 1 enclosure with four
perforated 7/8" knockouts.
51110-PTC
AC: 48kA
Tel: 1.9kA @ 3.8kV
CATV: 2kA
AC: 400V
Tel: 220V
CATV: 25V
All devices are UL Listed and CSA Certified.
Note: A Panel Mount Surge Protective Device should be installed at
the service panel in every DHC installation.
51120-1
4.75 (120.7 mm)
6.50 (165.1 mm)
2.2
(56.4 mm)
3.50 (88.9 mm)
8.13 (206.5 mm)
• Real-time diagnostic visual indicator shows
power and suppression status for each
protected phase
• Cat. No. 51110-PTC Multimedia Panel
protects AC, phone/fax/modem, and
CATV/Satellite lines from transient
voltage surges
• Cat. No. 52120-M2H features userreplaceable surge modules
• Backed by a Limited 10-Year Warranty
5.50 (139.7 mm)
SPECIFICATIONS & FEATURES
Top View
TESTING & CODE COMPLIANCE
• Listed to UL 1449 (2nd edition) Standards
• UL Listed (File #E-146315)
• CSA Certified (File #LR94773)
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V-2 Rating
Operating Temperature: -40°C to 120°C
MULTIMEDIA PANEL SURGE PROTECTIVE DEVICE
Cat. No. 51110-PTC
7.00 (177.8 mm)
6.00 REF. (152.4 mm)
4.06
(103.1 mm)
6.00 (152.4 mm)
7.00 (177.8 mm)
6.00 (152.4 mm)
PANEL MOUNTED SURGE PROTECTIVE DEVICE
Cat. No.51120-1,-3
B9
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Home Automation Products
Residential Grade
DHC Powerline Carrier Wall Switches
DESCRIPTION
CAT. NO.
Single-Pole (One Location) or 3-Way (Multi-Location) Dimming Switch with
Scene Control — Provides manual and remote ON/OFF switching and full range
dimming for larger incandescent and magnetic low-voltage lighting loads such as
chandeliers and multiple high-hats. Provides scene control capability when used
with DHC Scene Controller Cat. No. HCCS7-1TW (backward compatible with
16400/16450-S and 16400/16450-SD units). Also provides multi-station manual and
remote ON/OFF switching and full range dimming when used with Cat. No. MS00R-1
Multi-Remote Unit. Equipped with Intellisense (gated automatic gain control) for
outstanding performance and reliability.
Responds to ON, OFF, DIM, BRIGHT, ALL LIGHTS ON/ALL OFF and SCENE
LIGHTING commands. Preset feature turns lights ON at last selected brightness
level. Soft ON/Fade OFF feature provides eye-pleasing effect and extended bulb life.
Protected memory maintains lighting level during minor power fluctuations. Wires
easily into standard wall box. Neutral connection not required for incandescent loads. HCM10-1SW
Packed with Ivory and White Rocker and Frame Kits. Kits for other colors must be
purchased separately (See Chart).
Rated: 120V AC 60Hz, 1000W Incandescent,1000VA Magnetic Low-Voltage Lighting
HCM10-1SW, HCM06-1SW in 80301-W
Single-Pole (One Location) or 3-Way (Multi-Location) Dimming Switch with
Scene Control — Provides manual and remote ON/OFF switching and full range
dimming for incandescent and magnetic low-voltage lighting loads such as
chandeliers and multiple high-hats. Provides scene control capability when used
with DHC Scene Controller Cat. No. HCCS7-1TW (backward compatible with
16400/16450-S and 16400/16450-SD units). Also provides multi-station manual and
remote ON/OFF switching and full range dimming when used with Cat. No. MS00R-1
Multi-Remote Unit. Equipped with Intellisense (gated automatic gain control) for
outstanding performance and reliability.
Responds to ON, OFF, DIM, BRIGHT, ALL LIGHTS ON/ALL OFF and SCENE
LIGHTING commands. Preset feature turns lights ON at last selected brightness
level. Soft ON/Fade OFF feature provides eye-pleasing effect and extended bulb life.
Protected memory maintains lighting level during minor power fluctuations. Wires
easily into standard wall box. Neutral connection not required for incandescent loads. HCM06-1SW
Packed with Ivory and White Rocker and Frame Kits. Kits for other colors must be
purchased separately (See Chart).
Rated: 120V AC 60Hz, 600W Incandescent, 600VA Magnetic Low-Voltage Lighting
Single-Pole (One Location) or 3-Way (Multi-Location) Switch with Scene
Control — Provides manual and remote ON/OFF switching for incandescent, fluorescent and low-voltage lighting with magnetic ballasts such as track lighting,
chandeliers and multiple high-hats. Provides scene control capability when used
with DHC Scene Controller Cat. No. HCCS7-1TW (backward compatible with
16400/16450-S and 16400/16450-SD units). Also provides multi-station manual and
remote ON/OFF switching when used with Cat. No. MS00R-1 Multi-Remote Unit.
Equipped with Intellisense (gated automatic gain control) for outstanding performance and reliability. Requires Cat. No. 6287 when used with electronic loads such
as compact fluorescent lamps.
Responds to ON, OFF, ALL LIGHTS ON/ALL OFF and SCENE LIGHTING commands. Wires easily into standard wall box. Neutral Connection Required. Packed
with Ivory and White Rocker and Frame Kits. Kits for other colors must be purchased
separately (See Chart).
Rated: 10A 120V AC 60 Hz, 1200W Incandescent, 1200VA Fluorescent and
Magnetic Low-Voltage Lighting
HCS10-1SW in 80301-W
SPECIFICATIONS & FEATURES
• Fit in standard wallboxes and replace
regular switches to provide manual and
remote ON/OFF switching (all units), dimming
(except HCS10-1SW) and Scene Lighting
Control
• Leviton’s exclusive IntellisenseTM virtually
eliminates signal problems due to line noise
• Use existing 60Hz 120V AC house wiring to
add multi-location switching without resorting
to complicated and costly conventional wiring
means
• Decora styled to coordinate with Leviton’s
Decora line of wiring devices
• Backed by a Limited Two-Year Warranty
TESTING & CODE COMPLIANCE
HCS10-1SW
• UL Listed (File #E-66800)
• CSA Certified (File # LR-54628)
• UL 244A Tested (and others where
appropriate)
All devices are UL Listed and CSA Certified.
COLOR
Colors available as indicated. See chart for Rocker
and Frame Color Change Kits (must be purchased
separately)
2.38 (60.5 mm)
1.39
(35.3 mm)
1.39
(35.3 mm)
4.13 (104.9 mm)
1.73 (43.9 mm)
2.66
(67.6 mm)
4.13 (104.9 mm)
1.73 (43.9 mm)
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V-2 Rating
Operating Temperature: -40°C to 120°C
2.66
(67.6 mm)
2.38 (60.5 mm)
Rocker and Frame Kits for HCM10-1SW & HCM06-1SW
Cat. No.
Mahogany
—
Cat. No.
Ivory
Cat. No.
White
Cat. No.
Gray
Cat. No.
Almond
Cat. No.
Black
DRK0D-1LI DRK0D-1LW DRK0D-1LG DRK0D-1LA DRK0D-1LE
Rocker and Frame Kits for HCS10-1SW
DIMMING SWITCH WITH SCENE CONTROL
Cat. Nos. HCM10-1SW & HCM06-1SW
SWITCH WITH SCENE CONTROL
Cat. No. HCS10-1SW
Cat. No.
Mahogany
—
Cat. No.
Ivory
Cat. No.
White
Cat. No.
Gray
Cat. No.
Almond
Cat. No.
Black
DRK0S-0LI DRK0S-0LW DRK0S-0LG DRK0S-0LA DRK0S-0LE
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
B10
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Residential Grade
Home Automation Products
DHC Powerline Carrier Wall Switches with One-Button Programming
HCM10-1DW in 80301-W
HCS08-1TW in 80301-W
SPECIFICATIONS & FEATURES
• New One Button Programming
• Provide Scene Control capability when used
with DHC Scene Controller HCCS7-1TW and
HCCPG-1TW Toscana Programmer. Also
backward compatible with 16400/16450-S and
16400/16450-SD Scene Controllers
• Receivers provide multi-station manual and
remote On/Off switching and full-range dimming. Use MSOOR-10 Multi-Remote Unit
(wall switch SW and DW suffix ONLY)
• Soft On/Fade Off brightness levels allowing
extended bulb life
• Memory of last scene eliminating readjust settings — (HCS08-1TW and HCS10-1SW provide On/Off switch ONLY)
• Fits in standard wall boxes
• All devices come with Intellisense® technology
providing the utmost in reliability
• Protected memory during minor power fluctuations
• LED locator light alongside rocker for convenience — on DW or TW suffix
• Packed with Ivory and White snap-on
rocker/frame kit; optional snap-on
rocker/frame color change kits sold separately.
See color change kit chart
Scene-Capable Receiver with One-Button Programming — The new DHC Scene-Capable Receivers
provide one-button programming for scene and address capturing. All feature Leviton’s exclusive
Intellisense® to ensure top performance and reliability even when noise is present on the AC powerline.
Dimming Wall Switch Receivers provide manual and remote ON/OFF switching and full-range dimming for
incandescent and magnetic low-voltage lighting loads. The new HCS08-1TW Electronic Switch Receiver
(non-dimming) provides manual and remote ON/OFF switching for incandescent, magnetic low-voltage,
fluorescent and compact fluorescent lighting. The new HCP03-10W Plug-In Module allows remote ON/OFF
switching and full-range dimming for freestanding lamps, incorporating them into the lighting scenes. All
Switch Receivers come with a locator LED. Dimming models feature an LED brightness level display and a
preset feature that turns lights ON at the last selected brightness level. Double Tap feature immediately
adjusts light to full brightness without affecting the last selected brightness level. All -T Receivers allow
2-way status tracking with the DHC Toscana™ Deluxe Programmer and new 2-way capable controllers
when receivers are changed locally.
Typical applications include home theaters, dining rooms, chandeliers, living rooms with multiple high-hats,
entranceways, and a wide range of mood lighting applications.
DESCRIPTION
CAT. NO.
RATING
COLOR
600 Watt Scene-Capable Dimming Wall Switch
Receiver with One-Button Programming
and LED brightness display
HCM06-1DW
600W, 125V AC Incandescent,
600VA (450W) Magnetic LowVoltage Lighting
White (Ivory kit
included)
1000 Watt Scene-Capable Dimming Wall Switch
Receiver with One-Button Programming
and LED brightness display
HCM10-1DW
1000W, 125V AC Incandescent,
1000VA (750W) Magnetic LowVoltage Lighting
White (Ivory kit
included)
600 Watt Scene-Capable Dimming Wall Switch
Receiver with One-Button Programming,
2-Way Communication and LED brightness
display. Neutral connection required
HCM06-1TW
600W, 125V AC Incandescent,
600VA (450W) Magnetic Low-
White (Ivory kit
included)
1000 Watt Scene-Capable Dimming Wall Switch
Receiver with One-Button Programming,
2-Way Communication and LED brightness
display. Neutral connection required
HCM10-1TW
Colors available as indicated. See chart for Rocker and
Frame Kits (must be purchased separately)
White (Ivory kit
included)
Voltage Lighting
8 Amp, 125V AC 1000W
Incandescent, 1000VA (750W)
Fluorescent & Magnetic LowVoltage Lighting
White (Ivory kit
included)
300 Watt Scene-Capable Dimming Plug-In
Lamp Module with One-Button Programming
300W, 125V AC Incandescent
White Only
HCP03-10W
All devices are UL Listed and CSA Certified.
Special Note: As with any dimmer, derating for multiple gang installations is required for Wall Switch Receivers.
Use Leviton Power Extenders to extend the load capacity of DHC Dimming Wall Switch Receivers. Leviton
Power Extenders are available for incandescent, magnetic low-voltage, electronic low-voltage, Advance
Mark X™ fluorescent dimming ballasts or equivalents, and 0–10 VDC dimmable fluorescent ballasts such
as Advance Mark VII™, OSRAM Sylvania Quicktronic® Helios™ or equivalent ballasts.
Note: A Cat. No. HCA02-10E System Amplifier must be installed at the main panel in every DHC installation to ensure
adequate signal strength.
COLOR CHANGE KITS FOR WALL SWITCH RECEIVERS (ROCKER AND FRAME)
Compatible Color Change Kit
For Receiver:
COLOR
1000W, 125V AC Incandescent,
1000VA (750W) Magnetic Low-
1000W/1000VA 8 Amp Scene-Capable Electronic HCS08-1TW
Switch Receiver (non-dimming) with One-Button
Programming and 2-Way Communication.
Neutral connection required
TESTING & CODE COMPLIANCE
• UL Listed to File No. E31373
• CSA Certified to File No. LR3413
• NOM Certified #057
Voltage Lighting
Cat. No.
Mahogany
Cat. No.
Ivory
Cat. No.
White
Cat. No.
Gray
Cat. No.
Almond
Cat. No.
Black
HCM06/10-1SW
—
DRK0D-1LI
DRK0D-1LW
DRK0D-1LG
DRK0D-1LA
DRK0D-1LE
HCM06/10-1DW
—
DRKDD-1LI
DRKDD-1LW
DRKDD-1LG
DRKDD-1LA
DRKDD-1LE
HCM06/10-1TW
—
DRKDD-1LI
DRKDD-1LW
DRKDD-1LG
DRKDD-1LA
DRKDD-1LE
HCS08-1TW
—
DRK0D-1LI
DRK0D-1LW
DRK0D-1LG
DRK0D-1LA
DRK0D-1LE
HCS10-1SW
—
DRK0S-1LI
DRK0S-1LW
DRK0S-1LG
DRK0S-1LA
DRK0S-1LE
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V-2 Rating
Operating Temperature: -40°C to 120°C
B11
To learn more about Leviton’s outstanding offering of devices visit our Website at: http://www.leviton.com ....Building A Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Home Automation Products
Residential Grade
DHC Powerline Carrier Wall Switch Receivers
DESCRIPTION
CAT. NO.
Multi-Location Incandescent Dimming Switch — Provides multi-station
manual and remote switching and full-range dimming. When used with a 6294
Remote Switch equipped with Intellisense (gated automatic gain control) for
outstanding performance and reliability.
Responds to ON, OFF, DIM, BRIGHT, and ALL LIGHTS ON/ALL OFF commands. Preset feature turns lights ON at last selected brightness level. Soft
ON/Fade OFF feature provides eye-pleasing effect and extended bulb life.
Protected memory maintains lighting level during minor power fluctuations.
Built-in RFI filter. Wires easily into standard wall box. Packed with Ivory and
White Rocker and Frame. Kits for other colors must be purchased separately
(See Chart).
Rated: 120V AC 60Hz
500W max. Incandescent
60W min.
Note: To avoid overheating and possible damage to these units and other
equipment, do not use the Cat. No. 6383 to control a receptacle, fluorescent
lighting, motor-operated appliances or transformer-supplied loads. When
the 6383 is ganged with any other device, the 6383 should not be loaded
beyond 400W for a double-gang, or beyond 300W when three or more are
ganged together.
6383-WI in 80301-W
6383-WI
Single-Pole (One Location) Switch — Equipped with Intellisense (gated
automatic gain control) and provides manual and remote ON/OFF control. Can
be set to any of 256 DHC address codes to switch incandescent, inductive or
resistive loads where dimming is not required. Responds to ON, OFF, ALL
LIGHTS ON/ALL OFF commands. Wires easily into standard wall box using
terminal screws. Neutral Connection Required. Pilot light is ON when switch is
ON. Code wheels are located beneath rocker plate. Packed with Ivory and
White Rocker and Frame. Kits for other colors must be purchased
separately (See Chart). Requires Cat. No. 6287 when used with electronic
loads such as compact fluorescent lamps.
Rated: 15A 120V AC 60Hz Incandescent, Inductive or Resistive
6293-WI in 80301-W
6291-WI
SPECIFICATIONS & FEATURES
• Fit in standard wallboxes and replace regular
switches to provide manual and remote
ON/OFF switching of lighting and appliances.
6381-WI dimming switch rated for incandescent lighting only
• Leviton’s exclusive IntellisenseTM virtually
eliminates signal problems due to line noise
• Use existing 60Hz 120V AC house wiring to
add multi-location switching without resorting
to complicated and costly conventional
wiring means
• Decora styled to coordinate with Leviton’s
Decora line of wiring devices
• Backed by a Limited Two-Year Warranty
3-Way (Multi-Location) Switch — Equipped with Intellisense (gated
automatic gain control). Provides manual and remote ON/OFF control in multistation switching circuits when used in conjunction with one or more Cat. No.
6294 Remote Switches. The 6293 can be set to any of 256 DHC address
codes to switch incandescent, inductive or resistive loads where dimming is
not required. Responds to ON, OFF, ALL LIGHTS ON/ALL OFF commands.
Wires easily into standard wall box using terminal screws. Neutral Connection
Required. Pilot light is ON when switch is ON. Code wheels are located
beneath rocker plate. For proper operation, the total length of traveler wire
between Multi-Location Switch and Remote should not exceed 90 feet. Packed
with Ivory and White Rocker and Frame. Kits for other colors must be purchased separately (See Chart).
Rated: 15A 120V AC 60Hz Incandescent, Inductive or Resistive
6293-WI
All devices are UL Listed and CSA Certified.
TESTING & CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR-54628)
• UL 244A Tested (and others where
appropriate)
COLOR
Colors available as indicated. See chart for Rocker and
Frame Kits (must be purchased separately)
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V-2 Rating
Operating Temperature: -40°C to 120°C
NEUTRAL
4.06 (103.1 mm)
LOAD
3.28 (83.3 mm)
2.70 (68.6 mm)
2.70 (68.6 mm)
4.10 (104.1 mm)
CONTROL
LINE
Rocker and Frame Kits for 6383 Switch
1.73
(43.9 mm)
1.78
(45.2 mm)
SINGLE-POLE INCANDESCENT
DIMMING SWITCH
Cat. No. 6383-WI
1.53
(38.9 mm)
1.42
(36.0 mm)
SINGLE POLE, 3-WAY SWITCH
Cat. Nos. 6291-WI, 6293-WI
Cat. No.
Mahogany
6081-M
Cat. No.
Ivory
Cat. No.
White
Cat. No.
Gray
Cat. No.
Almond
Cat. No.
Black
6081-I
6081-W
6081-GY
6081-A
—
Rocker and Frame Kits for 6291 and 6293 Switch
6091-M
6091-I
6091-W
6091-GY
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
6091-A
—
B12
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Home Automation Products
Residential Grade
DHC Powerline Carrier Wall Switch Receivers
DESCRIPTION
MS00R in 80301-W
CAT. NO.
3-Way and 4-Way (Multi-Location) Remote Dimming Switch — This unit is only
for use as a remote switch with DHC Cat. Nos. HCM06/10-1SW, HCM06/10-1DW
and HCS10-1SW Multi-Location Switches with Scene Capability. The MS00R-1 provides ON/OFF and DIM/BRIGHT 3-Way, 4-Way and higher-level control in conjunction with these units (Note: HSC10-1SW Switch does not provide DIM/BRIGHT
control). The MS00R-1 cannot be used for any other purpose in the DHC network.
Available in Ivory (-10I), White (-10W), and Almond (-10A). Kits for other colors must
be purchased separately (See Chart).
No Load Rating — For use with HCM06/10-1SW, HCM06/10-1DW and
HCS10-1SW units with scene capability only
MS00R-1
3-Way and 4-Way (Multi-Location) Remote Switch — For use with DHC Cat.
No. 6293 Multi-Location Switches as a remote switch. The 6294 provides 3-Way,
4-Way and higher-level control in conjunction with these units. It cannot be used for
any other purpose in the DHC network. The unit wires easily into standard wall box
using terminal screws. For proper operation, the total length of traveler wire
between Multi-Location Switch and Remote should not exceed 90 feet. Available
in Mahogany (no dash), Ivory (-I), White (-W), Almond (-A) and Gray (-GY).
Specify color(s) when ordering, as snap-on cover and frame kits cannot be used
with the 6294.
No Load Rating — For use with 6293 and 6383 units only
6294
Double Pole Wall Switch — Equipped with Intellisense (gated automatic gain control). Provides local and remote ON/OFF control. Responds to ON/OFF and ALL
OFF commands from controllers. Can be set to any of the 256 DHC address codes.
Intended for control of pool pumps, air conditioning units, spa heaters and pumps,
and other large residential loads. Wire easily into any standard wall box by means of
six-inch leads. Available in Ivory only.
SPECIFICATIONS & FEATURES
Rated: 20A 2 HP 250V AC 60Hz
6371-I
All devices are UL Listed and CSA Certified.
2.38 (60.5 mm)
1.73 (43.9 mm)
2.66
(67.6 mm)
3.28 (83.3 mm)
4.06 (103.1 mm)
1.39
(35.3 mm)
4.13 (104.9 mm)
• Remote Units add multi-location capability to
dimmer and switch receivers
• Fit in standard wallboxes to replace regular
switches
• Leviton’s exclusive IntellisenseTM virtually
eliminates command signal problems due to
line noise
• 6371-I Heavy-duty appliance switch available
for automated control of heavy-duty loads
such as air conditioning and pool pumps
• Decora styled to coordinate with Leviton’s
Decora line of wiring devices
• Backed by a Limited Two-Year Warranty
2.62 (66.5 mm)
6371-I in 80301-I
TESTING & CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File # LR-54628)
• UL 244A Tested (and others where
appropriate)
1.42
(36.0 mm)
REMOTE SWITCH
Cat. No. 6294
REMOTE DIMMING SWITCH
Cat. No. MS00R-10
COLOR
1.52
(38.7 mm)
Colors available as listed
Rocker and Frame Kits for MS00R-10 Switch
B13
Cat. No.
Mahogany
Cat. No.
Ivory
Cat. No.
White
Cat. No.
Gray
Cat. No.
Almond
Cat. No.
Black
—
DRK0R-00I
DRK0R-00W
DRK0R-00G
DRK0R-00A
DRK0R-00E
1.30
(33.0 mm)
1.70
(43.2 mm)
2.62 (66.5 mm)
2.75 (69.9 mm)
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V-2 Rating
Operating Temperature: -40°C to 120°C
4.09 (103.9 mm)
HORSEPOWER
Cat. No 6371-I: 2 HP @ 250V 20A
.25
(6.4 mm)
1.40
(35.6 mm)
1.69
(42.9 mm)
DOUBLE POLE SWITCH
Cat. No. 6371-I
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Residential Grade
Home Automation Products
DHC Powerline Carrier Receivers
DESCRIPTION
CAT. NO.
O
IT
M
N
O
EN
C
M
E
TA
D
R
Y
IVER
IT
CO
13
1
9
5
M
DE
HO
®
SA
®
LM
ODU
A
UN
IT
OF
F
E
US
E CO
DE
LE
SO
U
N
D
Y
A
EL
LY
LY R
N
N &
O
O
ER AY
ER D
N
U REL
SO
Scene-Capable Plug-In Lamp Module with One-Button Programming —
Provides 1-button programming through address capturing. Provides remote
ON/OFF switching, manual ON switching, and remote full-range dimming for
plug-in incandescent lamps. No wiring necessary; plugs into 15 Amp AC outlet.
Allows local control of any lamp plugged into it. Available in White (-W) only.
Provides Scene Control capability when used with DHC Scene Controller
HCCS7-1TW and HCCPG-1TW DHC Toscana Deluxe Programmer. Also
backward compatible with 16400/16450-S and 16400/16450-SD DHC Scene
Controllers. Equipped with Leviton’s Intellisense® advanced circuitry for the
utmost in reliability, even where electrical “noise” exists on the power line.
Responds to ON, OFF, DIM, BRIGHT, ALL LIGHTS ON/ALL OFF and SCENE
LIGHTING commands.
Rated: 120V 60Hz, 300W Incandescent
TE
ST
UN
UN
U
Universal Low Voltage Module — Almost any device operated at low
voltages can now be automated using the 6337. This receiver interfaces
between the low voltage device and the 120V AC wiring network. It receives
an ON or OFF command from DHC Transmitters and can operate sprinkler
systems, designated lighting, skylight closures, heating systems, garage door
openers and other lighting and motor loads. Simply connect LV wiring to the
screw terminal on the module and plug it into any 120V wall outlet.
In addition to switching contacts, the 6337 has a built-in alarm that can be set
to sound whenever the switch contacts are closed. The 6337 can be set to
operate the relay only, the alarm only, or both the relay and the alarm.
The 6337 can also be set for momentary operation so that the relay and/or the
alarm will be turned on for approximately two seconds in response to any ON
command. Does not respond to ALL LIGHTS ON or DIM/BRIGHT commands.
Rated: 120V 60Hz AC only. Contacts: 5A 12V DC,
100VA 30V DC Inductive
6337
6337
HCP03-10W
HCP03-10W
All devices are UL Listed and CSA Certified.
SPECIFICATIONS & FEATURES
• Universal Low Voltage Module can automate
devices operated at low voltages such as
sprinklers, skylights, and heating/AC systems
• Plug-in Lamp Module adds convenience of
DHC remote ON/OFF and DIM/BRIGHT
control plus scene capability to plug-in
incandescent lamps
• Backed by a Limited Two-Year Warranty
TESTING & CODE COMPLIANCE
2.20
(55.9 mm)
TEST
1.95 (49.7 mm)
UL Listed (File #E-66800)
CSA Certified (File #LR-54628)
NOM Certified (#057)
UL 244A Tested (and others where
appropriate)
UNIT OFF
A
13
5
M
2.97 (75.3 mm)
1
3.57 (90.7 mm)
1.55
(39.5 mm)
•
•
•
•
E
9
UNIT CODE
HOUSE CODE
®
®
UNIVERSAL MODULE
1.15
(29.2 mm)
UNIVERSAL LOW VOLTAGE MODULE
Cat. No. 6337
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
2.125
(54.0 mm)
PLUG IN LAMP RECEIVER
Cat. No. HCP03-1SW
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
B14
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Residential Grade
Home Automation Products
DHC Powerline Carrier Receptacle Receivers
DESCRIPTION
CAT. NO.
Split Duplex Wall Receptacle — Equipped with Intellisense (gated automatic
gain control). Top outlet provides remote ON/OFF load control in response to
controller command signals. Bottom outlet is continuously live. Local control of
any light or appliance plugged into the controlled outlet can be achieved by
switching the load ON/OFF switch once or twice. Will not respond to ALL
LIGHTS ON command. Fits standard wall boxes and supplied with leads for
easy installation.
G
Rated: 15A 120V 60Hz AC only. NEMA 5-15R .
NEMA 5-15R
W
6227-W in 80301-W
Duplex Wall Receptacle — Equipped with Intellisense (gated automatic gain
control). Same as 6227, but with both top and bottom outlets providing
ON/OFF control in response to controller command signals. Feed-through load
lead allows control of receptacles downstream. Will not respond to ALL
LIGHTS ON command. No local control available.
Rated: 15A 120V 60Hz AC only. NEMA 5-15R
6227-I
6227-W
6227-A
CONTROLLED
1
A
E
M
5
13
9
I
6280-I
6280-W
6280-A
1
A
E
M
5
13
9
I
G
NEMA 5-15R
W
Single Wall Receptacle★— Equipped with Intellisense (gated automatic gain
control). Provides ON/OFF control. No local control available. Wires easily into
standard wallbox using supplied six-inch leads. Will not respond to ALL LIGHTS
ON command.
Rated: 20A 120V 60Hz AC only. NEMA 5-20R
6280-W in 80301-W
SPECIFICATIONS & FEATURES
• Configurations for all commonly used
amperage/voltage house combinations
• Fit in standard wallboxes to provide remote
switching
• Leviton’s exclusive IIntellisenseTM virtually
eliminates switching problems due to line
noise
• Decora styled to coordinate with Leviton’s
Decora line of wiring devices
• Backed by a Limited Two-Year Warranty
NEMA 5-20R
6296-I
6296-W
1
A
E
M
5
13
9
I
G
W
Single Wall Receptacle★— Equipped with Intellisense (gated automatic gain
control). Provides ON/OFF control. No local control available. Wires easily into
standard wallbox using supplied six-inch leads. Will not respond to ALL
LIGHTS ON command.
Rated: 20A 250V 60Hz AC only. NEMA 6-20R
6298-I
6298-W
1
A
E
M
I
5
13
9
G
NEMA 6-20R
All devices are UL Listed. Also CSA Certified except where indicated by★
TESTING & CODE COMPLIANCE
•
•
•
•
UL Listed (File #E-66800)
CSA Certified (File # LR-54628)
NOM Certified (#057)
UL 224A Tested (and others as appropriate)
COLOR
1
A
M
E
I
13
5
9
1.30
(33.0 mm)
1.70
(43.2 mm)
2.62 (66.5 mm)
CONTROLLED
2.75 (69.9 mm)
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
4.09 (103.9 mm)
Basic Cat. No. denotes Brown. For other colors add
suffix to cat. nos. as follows: Ivory (-I), White (-W),
Almond (-A).
.25
(6.4 mm)
1.40
(35.6 mm)
1.69
(42.9 mm)
WALL RECEPTACLE
Cat. No. 6227
B15
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Home Automation Products
Residential Grade
DHC Powerline Carrier Receiver Modules
DESCRIPTION
CAT. NO.
Fixture Relay Module — Can be mounted at either an incandescent or fluorescent fixture by means of adhesive strips. Responds to ON/OFF and ALL
LIGHTS ON/ALL OFF commands from controllers. Equipped with leads for
easy installation.
Rated: 15A 120V 60Hz AC only, incandescent, inductive, or resistive.
3
A
6375
Dimming Fixture Module — Can be mounted at an incandescent fixture by
means of adhesive strips. Responds to ON/OFF, DIM/BRIGHTEN and ALL
LIGHTS ON/ALL OFF commands from controllers. Equipped with leads for
easy installation.
Rated: 300W incandescent 120V 60Hz AC only.
6375
3
A
6376
All devices are UL Listed and CSA Certified.
Use Leviton Power Extenders to extend the load capacity of DHC Dimming Wall Switch Receivers. Leviton
Power Extenders are available for incandescent, magnetic low-voltage, electronic low-voltage, Advance
Mark X™ fluorescent dimming ballasts or equivalents, and 0–10 VDC dimmable fluorescent ballasts such
as Advance Mark VII™, OSRAM Sylvania Quicktronic® Helios™ or equivalent ballasts.
See Lighting Controls Section O for more information on Leviton Power Extenders.
SPECIFICATIONS & FEATURES
• Fixture modules provide direct control for fixtures where only remote control is necessary
• Backed by a Limited Two-Year Warranty
1.3
(53.3 mm)
TESTING & CODE COMPLIANCE
•
•
•
•
2.95 (74.9 mm)
2.100
(53.3 mm)
BLACK
UL Listed (File #E-66800)
CSA Certified (File #LR-54628)
NOM Certified (#057)
UL 224A Tested (and others as appropriate)
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
BLUE
WHITE
FIXTURE RELAY MODULE
Cat. No. 6375
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
B16
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Home Automation Products
Residential Grade
DHC Powerline Carrier Couplers and Filters
DESCRIPTION
CAT. NO.
Noise Block — The 6287 is designed for use with DHC switch modules that
include a means for connection to neutral. This device may be wired on the
LOAD side of a DHC switch module (except 6383), or on the LINE side of any
fixture using an electronic ballast, a low-voltage ballast, or any noise-generating
source that does not require more than 5A 120V AC. The 6287 prevents
interference generated by fixture components from interfering with DHC signals.
Rated: 5A 120V 60Hz AC only.
6287
6287
Plug-in Noise Filter — electrical appliances may generate “noise” that could
interfere with proper signal transmission. When the offending appliance is isolated and plugged into the 6288 Noise Filter, which is in turn plugged into a
receptacle, stray noise is filtered out, ensuring a clear signal. Color: Brown.
Rated: 5A 120V 60Hz AC only.
6288
In-Line Noise Reducer — the 6289 Noise Reducer filters electrical “noise”
and signals with frequencies above and below the 121 kHz signal. The 6289
may be installed at the “noise” or signal source or at the module affected by the
interference. Depending on the source of the interference, the 6289 may be
wired phase to neutral or phase to phase.
6288
6289
DHC Powerline Carrier Test Equipment
DESCRIPTION
CAT. NO.
Signal Strength Indicator — Measures command signal strength at individual
module locations. Minimum signal strength required for proper DHC Powerline
Carrier component operation is 100mV. For use with 6385 Signal Strength
Indicator.
6386
All devices are UL Listed only, not CSA Certified.
2.92 (74.2 mm)
6386
SPECIFICATIONS & FEATURES
• NOM Certified (#057)
• UL Listed (E-66800)
Signal Strength Indicator
• UL Listed (File #E-66800)
• NOM Certified (#057)
• UL 224A Tested (and others as appropriate)
MATERIAL CHARACTERISTICS
Environmental: Flammability (Engineering
Thermoplastic) UL-94, V2 Rating
Operating Temperature: -40°C to 120°C
B17
5 AMP BLOCK
CAT. NO. 6287
BLACK LOAD
6287
BLACK HOT L
1.43
(36.2 mm)
WHITE NEUTRAL
U® L
LISTED
898F APPLIANCE CONTROL
1.85 (46.9 mm)
NOISE BLOCK—Cat. No. 6287
PLUG-IN NOISE FILTER—Cat. No. 6288
1.17
(29.7 mm)
TESTING & CODE COMPLIANCE
R
1.58 (40.1 mm)
• These devices are designed to eliminate
interference from appliances, electronic
ballasts and home electronics in order to
insure top performance from DHC systems
• Backed by a Limited Two-Year Warranty
Signal Strength Indicator
• Signal strength testing equipment used to
ensure proper operation of DHC system
• Backed by a Limited Two-Year Warranty
2.60 (66.0 mm)
IN-LINE NOISE REDUCER—Cat. No. 6289
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement