C-MORE | EA1-TCL-M | User manual | C-MORE EA1-TCL-M User manual

C-more Micro-Graphic Panels Selection Guide
C-more Micro-Graphic Panels
Part Number
EA1-S3ML
NonTouch
EA1-S3ML-N
Description
Price
3.1-inch C-more Micro-Graphic Touch Panel with green and red LED backlights. Supports 5
selectable backlight colors (Green, Red, Amber, Yellow and Lime). STN LCD monochrome, 128
x 64 dot display. Has 5 user-defined function keys with LED indicators. Power is supplied to the
panel through the serial communication port connection when used with DirectLOGIC PLCs having an RJ12 communication port. EA-MG-SP1 (power supply with serial option module)
required when connecting to third party PLCs. NEMA 4/4X, IP65 (when mounted correctly; for
indoor use only).
<--->
3.1-inch C-more Micro-Graphic Non-Touch Panel with green and red LED backlights. Supports
5 selectable backlight colors (Green, Red, Amber, Yellow and Lime). STN LCD monochrome, 128
x 64 dot display. Has 5 user-defined function keys with LED indicators. Power is supplied to the
panel through the serial communication port connection when used with DirectLOGIC PLCs having an RJ12 communication port. EA-MG-SP1 (power supply with serial option module)
required when connecting to third party PLCs. NEMA 4/4X, IP65 (when mounted correctly; for
indoor use only).
<--->
EA1-S3MLW-N
<--->
EA1-S6ML
EA1-S6MLW
EA1-T6CL
5.7-inch C-more Micro-Graphic Touch Panel with STN LCD monochrome, 320x240 dot display.
The panel has white and red LED backlights. Supports 5 selectable backlight colors (White,
Pink1, Pink2, Pink3, and Red). Includes 5 user-defined function keys with LED indicators. 2 built
in serial Ports (RS-232 RJ12 port and 15 pin D-sub RS-232/422/485). NEMA 4/4X, IP65 (when
mounted correctly; for indoor use only).
5.7-inch C-more Micro-Graphic Touch Panel with TFT Color LCD, 320 x 240 dot, 32,768 color
display with LED backlight. 5 user-defined function keys with LED indicators. Two built-in ports
(USB Type-B port and 15-pin D-sub RS-232/422/485 port). Display supports Portrait and
Landscape modes. NEMA 4/4X, IP65 (when mounted correctly; for indoor use only).
EA1-xnxLx-x
Display Type:
S: STN
T: TFT
Backlight Color:
(STN Panels only)
blank: red, green, amber, lime, yellow
W: white, pink1, pink2, pink3, red
Proximity
Sensors
Photo
Sensors
Limit
Switches
<--->
Encoders
Current
Sensors
Pressure
Sensors
<--->
Temperature
Sensors
Pushbuttons/
Lights
Process
<--->
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
<--->
Power
Circuit
Protection
Enclosures
Tools
Display Color:
M: Monochrome
C: Color
Backlight Type:
L: LED
Pneumatics
Safety
Appendix
Product
Index
Features:
blank: Touch Screen
N: Non Touch Screen
Volume 14
w w w. a u to m a t i o n d i re c t . c o m / C - m o re - m i c ro
Steppers/
Servos
Motor
Controls
C-more Micro-Graphic Panel Part No. Key:
Display Size:
3: 3.1”
4: 4.1“
6: 5.7”
Series Name:
EA1: C-more Micro-Graphic
Drives
Motors &
Gearbox
3.1-inch C-more Micro-Graphic Non-Touch Panel with High Contrast white and red LED backlights. Supports 5 selectable backlight colors (White, Pink1, Pink2, Pink3 and Red). STN LCD
monochrome, 128 x 64 dot display. Has 5 user-defined function keys with LED indicators. Power
is supplied to the panel through the serial communication port connection when used with
DirectLOGIC PLCs having an RJ12 communication port. EA-MG-SP1 (power supply with serial
option module) required when connecting to third party PLCs. NEMA 4/4X, IP65 (when mounted correctly; for indoor use only).
5.7-inch C-more Micro-Graphic Touch Panel with STN LCD monochrome, 320x240 dot display.
The panel has red and green LED backlights. Supports 5 selectable backlight colors (Red, Green,
Amber, Lime, and Yellow). Includes 5 user-defined function keys with LED indicators. 2 built in
serial Ports (RS-232 RJ12 port and 15 pin D-sub RS-232/422/485). NEMA 4/4X, IP65 (when
mounted correctly; for indoor use only).
Field I/O
Soft
Starters
<--->
4-inch C-more Micro-Graphic Touch Panel with TFT Color LCD, 320 x 240 dot, 32,768 color
display with LED backlight. 5 user-defined function keys with LED indicators. Two built-in ports
(USB Type-B port and 15-pin D-sub RS-232/422/485 port). Display supports Portrait and
Landscape modes. NEMA 4/4X, IP65 (when mounted correctly; for indoor use only).
Programmable
Controllers
C-more &
other HMI
EA1-S3MLW
EA1-T4CL
Systems
Overview
Software
3.1-inch C-more Micro-Graphic Touch Panel with High Contrast white and red LED backlights.
Supports 5 selectable backlight colors (White, Pink1, Pink2, Pink3 and Red). STN LCD monochrome, 128 x 64 dot display. Has 5 user-defined function keys with LED indicators. Power is
supplied to the panel through the serial communication port connection when used with
DirectLOGIC PLCs having an RJ12 communication port. EA-MG-SP1 (power supply with serial
option module) required when connecting to third party PLCs. NEMA 4/4X, IP65 (when mounted correctly; for indoor use only).
NonTouch
Company
Information
Operator Interface
e11-11
Part #
Index
C-more Micro-Graphic Panels Selection Guide
C-more Micro-Graphic Panel Accessories
Part Number
Description
Price
EA-MG-BZ1
8-button keypad bezel for C-more 3” Micro-Graphic panels, with 4 arrow adjust keys, and
ESCAPE, MENU, CLEAR and ENTER buttons. Helps to reduce screen wear in heavy-duty applications where operators can use the keypad. Designed for easy drop-in of the Micro-Graphic
panels.
<--->
20-button keypad bezel with numeric keypad for C-more 3” Micro-Graphic panels, with 4 arrow
adjust keys, and ESCAPE, MENU, CLEAR and ENTER buttons. Helps to reduce screen wear in
heavy-duty applications where operators can use the keypad to enter numeric data. Designed for
easy drop-in of the Micro-Graphic panels.
<--->
EA-MG-P1
Optional DC Power Adapter for C-more 3” Micro-Graphic panels. Required when using third
party PLCs, or when using 24 VDC power instead of the 5 VDC supplied from the RJ12 connector of a Productivity Series, CLICK or Direct LOGIC PLC.
<--->
EA-MG-SP1
Optional Serial Port with DC Power Adapter for C-more 3” Micro-Graphic panels. Serial port is
a D-Sub 15-pin RS-232/RS-422/485 connector. Required when using RS422, RS485 or third
party PLCs.
<--->
EA-MG-COV-CL
Optional clear screen overlay used to protect C-more 3” Micro-Graphic displays from minor
scratches and wear. Package contains 5 clear screen overlays.
<--->
EA-4-COV2
Optional clear screen overlay used to protect C-more 4” Micro-Graphic displays from minor
scratches and wear. Package contains 3 clear screen overlays.
<--->
EA-MG6-BZ2
For Landscape (Horizontal) Mounted Panels. 20-button keypad bezel with numeric keypad for
C-more 6” Micro-Graphic panels, 4 arrow adjust keys, and ESCAPE, MENU, CLEAR and ENTER
buttons. Helps to reduce screen wear in heavy-duty applications where operators can use the
keypad to enter numeric data. Designed for easy drop-in of the Micro-Graphic panels.
<--->
EA-MG6-BZ2P
For Portrait (Vertical) Mounted Panels. 21-button keypad bezel with numeric keypad for
C-more 6” Micro-Graphic panels, 4 arrow adjust keys, and ESCAPE, MENU, CLEAR and
(2) ENTER buttons. Helps to reduce screen wear in heavy-duty applications where operators can use the keypad to enter numeric data. Designed for easy drop-in of the MicroGraphic panels.
<--->
EA-6-COV2
Optional clear screen overlay used to protect C-more 6” Micro-Graphic displays from minor
scratches and wear. Package contains 3 clear screen overlays.
<--->
EA-MG-BZ2
Volume 14
e11-12
Operator Interface
1 - 80 0 - 633 - 0405
C-more 4” Micro-Graphic TFT Touch Panel
Model EA1-T4CL C-more 4” Micro-Graphic touch panel has a 4.1-inch TFT LCD
320 x 240 dot display and a palette of 32K colors for customizing objects, screen
backgrounds and displaying bitmap graphics. It features five user-defined function
keys, each key with a user-defined red LED indicator. The panel can display up to
40 lines by 80 characters of static text and up to 30 lines by 40 characters of
dynamic text with embedded variables and phrases mixed with graphics in landscape orientation. Portrait orientation can display 54 lines by 59 characters of static
text and 40 lines by 40 characters of dynamic text. It is rated UL for use on a flat
surface of Type 1, 4X enclosure (for indoor use only). The C-more 4” MicroGraphic TFT panels are powered from a Class 2, 12-24 VDC power supply*.
Features
• Standard 1/4 DIN mounting cutout
• Touch screen display
• Free downloadable programming software
• 320 x 240 Dot display with up to 40 lines
by 80 characters of text and graphics in
landscape mode
• Up to 40 lines by 40 characters of dynamic
text with embedded variables and phrases
mixed with graphics
• 5 programmable function keys can change
with every screen. Can increment / decrement values, trigger recipes, view index of
screens.
• 32K colors
• Optional replaceable clear screen overlay
• 3,276 KB memory
• Built-in USB type B programming port
• Built-in 15-pin serial communications port
• Built-in Alarm Control setup that activates
beep, backlight flash, customized alarm
banner, and red LED blinking
• 0 to 50 °C (32 to 122 °F) operating
temperature range (IEC 60068-2-14)
• NEMA 4/4X, IP65 compliant when
mounted correctly, indoor use only
• UL, cUL & CE agency approvals
• 2-year warranty from date of purchase
C
UL
R
Part No. EA1-T4CL
Company
Information
Systems
Overview
Programmable
Controllers
Field I/O
Software
C-more &
other HMI
Drives
Soft
Starters
US
Motors &
Gearbox
<--->
*NOTE: The EA1-T4CL can be powered through Port1 when connected to a PC for programming, the screen brightness is diminished because the panel is running in Low-Power
Mode. For full brightness, connect an external Class 2, 12-24 VDC power source to the
4” panel’s power connection. An external Class 2, 12-24 VDC power source must be
used when the panel is installed in its application.
Dimensions
Steppers/
Servos
Motor
Controls
Proximity
Sensors
Photo
Sensors
Units: inches [mm]
3.583
[91.0]
MOUNTING CLIP
(4) places
GASKET
2.035 1.807 1.252
[51.7] [45.9] [31.8]
.343
[8.7]
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
4.311
[109.5]
Temperature
Sensors
Pushbuttons/
Lights
3.583
[91.0]
Process
4.362
[110.8]
Relays/
Timers
Comm.
Panel Cutout - Standard 1/4 DIN
+0.04
3.622 –0.00
0.344
[8.8]
0.344
[8.8]
92.0
+1
–0
0.344
[8.8]
R .079 [R2]
CUTOUT
OUTLINE
+0.04
3.622 –0.00
Terminal
Blocks &
Wiring
Power
Panel Thickness
Circuit
Protection
Enclosures
ENCLOSURE MOUNTING
THICKNESS RANGE
0.04” - 0.2” [1 - 5mm]
CUTOUT
NOTE: The C-more 4” Micro-Graphic cutout dimensions are
not equivalent to previous AutomationDirect text panels.
The C-more 4” Micro-Graphic panels will not fit in cutouts
for DV-1000, EZText, Optimate panels or C-more panels.
0.344
[8.8]
Volume 14
w w w. a u to m a t i o n d i re c t . c o m / C - m o re - m i c ro
Pneumatics
Safety
BEZEL
OUTLINE
+1
92.0 –0
Tools
Operator Interface
e11-37
Appendix
Product
Index
Part #
Index
C-more 4” Micro-Graphic Specifications
Specifications
320 x 240 dots LCD display (Landscape Mode),
Five user defined keypad function buttons, and five user defined LED's
Description:
Display:
• Type
4.1" TFT Color LCD, graphical characters
• Resolution
320 (W) x 240 (H) dots (Landscape Mode)
240 (W) x 320 (H) dots (Portrait Mode)
• Color
32768 colors
• Display Brightness
(Reference)
USB Bus Power (Programming)
High Power Mode
180 nits (typ)
360 nits (typ)
• Viewing Area Size
3.357” (W) x 2.54” (H) [85.26 mm x 64.62 mm]
• Active Area Size
3.250” (W) x 2.438” (H) [82.56 mm x 61.92 mm]
• Brightness
Adjusted from the panel’s built-in configuration setup menu
3, 9 o’clock axis –> 35 degrees
6 o’clock axis –> 50 degrees
12 o’clock axis –> 20 degrees
• Viewing Angle
(Landscape Mode)
Backlight:
• Type
LED
• Color
White
• User Replaceable
No
Touch Screen:
•Type
Analog touch panel
• Operation
82 gram force [0.8 N] maximum
• Life
Minimum of 1,000,000 cycles
Features:
• User Memory
3276 kBytes
• Number of Screens
Up to 999 – limited by project memory usage
• Beep (Internal)
Yes
• Keypad Function Buttons
• Keypad Function Button
LEDs
• Programming Port
• Serial Communications
Five user defined function key buttons with the ability to custom label with an overlay.
Minimum of 500,000 cycles
Each function key button includes a red LED that can be user programmed.
USB Type B
15-pin D-sub serial communications port (RS-232, RS-485 / 422).
Screen Objects:
• Functional Devices
• Static Shapes
• Displayable Fonts
Push Button, Switch, Indicator Button, Indicator Light, Graphic Indicator Light, Numeric Display, Numeric Entry, Inc/Dec Value, Bar
Graph, Bitmap Button, Static Bitmap, Dynamic Bitmap, Recipe Button, Static Text, Lookup Text, Dynamic Text, Screen Change Push
Button, Screen Selector, Adjust Contrast, Function, Key Configuration Object, Real Time Graphics Line Graph, Analog Meter.
Lines, Rectangles, Circles and Frames
Fixed fonts: 4x6, 6x6, 6x6B, 6x8, 8x16, 8x32, 8x64, 16x16, 16x32, 16x64,
32x16, 32x32, 32x64, and Windows fonts
C-more 4” Micro-Graphic panel specifications continued on next page.
Volume 14
e11-38
Operator Interface
1 - 80 0 - 633 - 0405
C-more 4” Micro-Graphic Specifications
Company
Information
Systems
Overview
Specifications (cont’d)
Programmable
Controllers
Electrical:
USB Bus Power (Programming)
High Power Mode
5.0 VDC (4.75 – 5.25 VDC)
12/24 VDC (10.2 – 26.4 VDC)
Supplied from a PC USB.
Supplied from an external
Class 2, 12-24 VDC power source
Software
• Power Consumption
2W
4.5 W
• Recommended Fuse
No fuse required when directly connected to a PC with
recommended cable.
Type AGC fast acting glass fuse,
750 mA, 250 VAC, ADC p/n AGC-75
C-more &
other HMI
4.5 A for 800 µs
8 A for 800 µs
• Input Voltage Range
• Input Power
• Maximum Inrush Current
• Acceptable External
Power Drop Duration
Environmental:
Field I/O
Drives
Soft
Starters
Maximum 1 ms
Motors &
Gearbox
0 to 50 °C (32 to 122 °F)
Maximum surrounding air temperature rating: 50 °C
• Operating Temperature
• Storage Temperature
Steppers/
Servos
–20 to +60 °C (–4 to +140 °F)
• Humidity
Motor
Controls
5–95% RH (non-condensing)
• Environmental Air
• Vibration
• Shock
For use in Pollution Degree 2 environment
IEC60068-2-6 (Test Fc), 5-9 Hz: 3.5 mm amplitude, 9-150 Hz: 1.0G, sweeping, at a rate of
1 octave/min. (±10%), 10 sweep cycles per axis on each of 3 mutually perpendicular axes
Proximity
Sensors
IEC60068-2-27 (Test Ea), 15 G peak, 11 ms duration, three shocks in each direction
per axis, on 3 mutually perpendicular axes (total of 18 shocks)
Photo
Sensors
NEMA ICS3-304
RFI, (145 MHz, 440 Mhz 10 W @ 10 cm)
Impulse 1000 V @ 1 µs pulse
• Noise Immunity
• Enclosure
Limit
Switches
For use on a flat surface of Type 1, 4X enclosure (Indoor use only)
• Agency Approvals
Encoders
CE (EN61131-2), UL508, CUL Canadian C22.2 No. 142-M95, UL File E157382, CSA 234884
Current
Sensors
Physical:
• Dimensions
• Enclosure Mounting
Thickness Range
• Mounting Clip Screw
Torque Range
• Weight
Pressure
Sensors
4.311” (W) x 4.362” (H) x 2.035” (D) [109.5 mm x 110.8 mm x 51.7 mm]
0.04” – 0.2” [1 – 5 mm]
Temperature
Sensors
21 – 28 oz-in [0.15 – 0.2 Nm]
Pushbuttons/
Lights
14.99 oz. (425 g)
Process
Relays/
Timers
PLC Drivers
Comm.
Serial - port2 only
Terminal
Blocks &
Wiring
AutomationDirect Productivity Series
Allen-Bradley DF1 Half Duplex
AutomationDirect CLICK
Allen-Bradley DF1 Full Duplex
AutomationDirect Do-more
Allen-Bradley PLC5 DF1
AutomationDirect K-sequence
Allen-Bradley DH485
AutomationDirect DirectNET
GE SNPX (90/30, 90/70, Micro 90, VersaMax Micro)
AutomationDirect Modbus
Mitsubishi FX
AutomationDirect SOLO
Mitsubishi (Q, QnA)
AutomationDirect GS Drives
Omron Host Link (C200 Adapter, C500)
Modicon Modbus RTU
Omron FINS Serial (CJ1, CS1)
Entivity Modbus RTU
Siemens PPI (S7-200 CPU)
Power
Circuit
Protection
Enclosures
Tools
Pneumatics
Safety
NOTE: EA1-T4CL cannot be powered by a PLC and cannot
communicate with a PLC through Port1
Appendix
Product
Index
For a list of supported protocols and cabling options refer
to the 4” & 6” C-more Micro-Graphic Protocols and
cabling chart starting on page 11-61.
Volume 14
w w w. a u to m a t i o n d i re c t . c o m / C - m o re - m i c ro
Operator Interface
e11-39
Part #
Index
C-more 4” Micro-Graphic Panels Overview
Overview
C-more 4” Micro-Graphic panel is a full color, TFT
model that offers touch screen capability and customizable graphics! The 4” panel mounts in a standard 1/4
DIN cutout.
Installing the software and configuring the C-more 4”
Micro-Graphic panel is simple. You will need the
following to successfully connect and configure a
project for the panel:
• C-more 4” Micro-Graphic panel
• C-more Micro-Graphic Programming Software EA-MGPGMSW (Downloadable version available from the
AutomationDirect web site at no charge.)
• C-more Micro-Graphic USB Programming Cable such as
USB-CBL-AB6, used to connect between a PC and the
Micro-Graphic panel’s built-in serial port. The panel will
operate in Low-Power mode when powered by the PC
and the screen brightness is diminished.
• Power source – An external Class 2, 12-24 VDC power
source is required for normal High-Power operation.
Recommended power supplies are AutomationDirect
part numbers PSC-24-015 or PSC-24-030.
• Personal computer – to run the C-more Micro-Graphic
programming software
• Communications Cable (serial) – to connect the C-more
Micro-Graphic panel to your PLC or other controller with
which the panel will communicate.
Drivers for your Controller
C-more 4” Micro-Graphic panels have the following
drivers available for connection to Productivity Series,
CLICK, DirectLOGIC and many other devices:
• AutomationDirect Productivity Series
• AutomationDirect Do-more
• AutomationDirect CLICK (Modbus)
• DirectLOGIC K-sequence, DirectLOGIC DirectNET,
DirectLOGIC Modbus (Koyo Addressing)
• Modbus RTU
• Allen Bradley DF1 Full Duplex, Allen Bradley DF1 Half
Duplex, Allen Bradley PLC5 DF1, AB DH485
• Omron Host Link (C200 Adapter, C500)
Omron FINS serial (CJ1, CS1)
• GE SNPX (90/30, 90/70, Micro 90, VersaMax Micro)
• Mitsubishi Melsec FX
• Siemens PPI
• Entivity Modbus RTU
• AutomationDirect GS Drives
• AutomationDirect SOLO Temperature Controllers
• Mitsubishi Q/QnA
Systems
Overview
Programmable
Controllers
EA1-T4CL
In addition to the simple panel configuration
software, a very helpful feature is the built-in project
simulator. The project simulator allows you to view your
project on the PC screen as it would appear on the
panel and to test all your screens before downloading
the project to the panel. You can simulate your entire
project at any stage of development and even simulate
the function keys and keypad bezel.
Getting started
Company
Information
Field I/O
Software
<--->
C-more &
other HMI
Drives
NOTE: EA1-T4CL requires Software and Firmware Version 3.00 or later.
Available for free download at www.automationdirect.com.
Bitmaps
Text - 40 lines
• 40 lines by 80 characters of static text in Landscape Orientation
• 54 lines by 59 characters of static text in Portrait Orientation
• Look up text, scroll up to 128 characters
• 30 lines by 40 characters of dynamic text, embedded variables, on/off phrases,
scroll up to 40 characters
• Scroll text object with up to 128 characters
Beep
Motor
Controls
Proximity
Sensors
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
• Beep to indicate an alarm
• Beep for a special message
• Beep to verify when button is pressed
Temperature
Sensors
Bar graphs
Pushbuttons/
Lights
Data entry
• Line, vertical, horizontal, skinny, fat, multiple
Process
• Pop-up numeric key pad on the screen
• Increment/decrement a value by touching arrows
Relays/
Timers
Recipes
Each recipe button transfers up to 99 values from PLC source registers to PLC
destination registers and/or from the recipe table to PLC destination registers.
32K Colors
The TFT panel has a palette of 32K colors available to make full use of color for
objects and bitmaps as well as backgrounds.
C-more Micro-Graphic supports up to 999
screens. Screen quantity is limited by memory
usage which is determined by the total bitmaps,
objects, etc. that are used.
Comm.
Terminal
Blocks &
Wiring
Power
Circuit
Protection
Enclosures
Tools
Pneumatics
Safety
Appendix
Product
Index
Volume 14
w w w. a u to m a t i o n d i re c t . c o m / C - m o re - m i c ro
Motors &
Gearbox
Steppers/
Servos
Features
• 320 X 240 pixel graphical display supports bitmaps
• Use bitmap images of pushbuttons, switches, indicators, your company logo
• Use provided library of bitmaps
• Create your own library of bitmaps
Up to 999 Screens
Soft
Starters
Operator Interface
e11-35
Part #
Index
C-more 4” Micro-Graphic Panels Overview
C-more 4” TFT Micro-Graphic Panel
Part Number
Description
Price
EA1-T4CL
4-inch C-more Micro-Graphic Touch Panel with TFT Color LCD, 320 x 240 dot, 32,768 color display with LED backlight. 5 user-defined function keys with LED indicators. Two built-in ports (USB
Type-B port and 15-pin D-sub RS-232/422/485 port). Display supports Portrait and Landscape
modes. NEMA 4/4X, IP65 (when mounted correctly; for indoor use only).
<--->
Note: Software and Firmware Version 3.00 or later is required with model EA1-T4CL. Available for free download at
www.automationdirect.com.
C-more Micro-Graphic Programming Software
Part Number
EA-MG-PGMSW
USB-CBL-AB3
USB-CBL-AB6
USB-CBL-AB10
USB-CBL-AB15
Description
Price
C-more Micro-Graphic panel Windows-based configuration software. Requires Windows 2000
with Service Pack 4, XP Home or Professional 32-bit with Service Pack 2, Vista, Windows 7 32bit or 64-bit or Windows 8 32-bit or 64 bit. Requires USB port connection from PC to touch
panel. Includes CD-ROM. Programming cable sold separately. Downloadable version available
from the Web site at no charge. Software Help Files included in download. Programs all C-more
Micro-Graphic Panels
The C-more Micro-Graphic TFT panel requires a USB A-to-B type cable to connect a personal
computer to the panel for programming. (Note: The TFT panel includes a built-in USB to serial
converter and the USB driver will appear as a COM port to the PC when properly installed. The
USB port supplies 5VDC to the TFT panel so that no external power supply is required for
programming.)
<--->
<--->
<--->
<--->
<--->
C-more 4” Micro-Graphic Panel Accessories
Part Number
Description
Price
EA-4-COV2
Optional clear screen overlay used to protect C-more 4” Micro-Graphic displays
from minor scratches and wear. Package contains 3 clear screen overlays.
<--->
For a list of supported protocols and cabling options refer to
the 4” & 6” C-more Micro-Graphic Protocols and cabling
chart starting on page 11-61.
Volume 14
e11-36
Operator Interface
1 - 80 0 - 633 - 0405
C-more 4” Micro-Graphic
Power Connection Wiring
Providing power to the touch panel
1.) The panel is powered by a Class 2, 1 Amp @ 12-24 VDC power source in
normal operation. Recommended power supplies are AutomationDirect
part number PSC-24-015 or PSC-24-030.
2.) C-more Micro-Graphic TFT panel EA1-T4CL is powered during programming
through a USB A-to-B cable such as USB-CBL-AB6.
The panel will operate in Low-power mode when powered by the PC and
result in a dim screen.*
3.) C-more Micro-Graphic TFT panel EA1-T4CL cannot be powered from a PLC.
*NOTE: The EA1-T4CL can be powered through Port1 when connected to a PC for programming, the screen brightness is diminished because the panel is running in Low-Power
Mode. For full brightness, connect an external Class 2, 12-24 VDC power source to the
4” panel’s power connection. An external Class 2, 12-24 VDC power source must be
used when the panel is installed in its application.
4” Panel powered from a DC power source – wiring diagram
R**. 1 2 3 4 5
MODEL:EA1-T4CL
0.19-0.38A Class2
Class2
INPUT:12-24V 0.19-0.38A
Date code:9048
MADE IN CHINA
R
7M17
IND.CONT.EQ.
EA1-T4CL＋
EA1-T4CL＋094018001
Supply to Panel:
1 A @ 12 - 24 VDC
(10.8 - 26.4 VDC)
Equipment
Ground
GND
–
+
Recommended
DC Supply Fuse
750 mA fast acting,
ADC p/n AGC-75
NOTE: Recommended DC power supply to power the C-more Micro-Graphic Panel,
AutomationDirect Part No. PSC-24-015 or PSC-24-030.
Volume 14
e11-40
Operator Interface
1 - 80 0 - 633 - 0405
C-more 4” Micro-Graphic Panel Accessories
D-SUB 15-pin 90-degree Communication Port Adapter
The EA-ADPTR-4 adapter plugs into the 15-pin serial port on the rear of a 4” panel to allow a controller communication cable
to be plugged in at a 90 degree angle to reduce panel depth requirements. 15-pin straight through pin-out. UL Recognized.
Dimensions
Part No.
EA-ADPTR-4
Units: inches [mm]
0.815
[20.7]
Programmable
Controllers
Field I/O
C-more &
other HMI
Drives
Soft
Starters
Date code
1.605
[40.8]
Systems
Overview
Software
R
Country of Origin
Motors &
Gearbox
KOYO ELECTRONICS INDUSTRIES CO., LTD.
EA-ADPTR-4
IOIOI – PLC
1.873
[47.6]
Company
Information
Steppers/
Servos
0.793
[20.2]
Motor
Controls
<--->
Proximity
Sensors
0.856
[21.7]
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
D-SUB 15-pin to Terminal Block Adapter
Pressure
Sensors
The EA-COMCON-3 adapter plugs into the 15-pin serial port on the rear of a 4” panel to allow wire
terminal connections for an RS-422/RS-485/DH-485 PLC communication cable. UL Recognized.
Temperature
Sensors
Dimensions
Part No.
EA-COMCON-3
Units: inches [mm]
Pushbuttons/
Lights
R
1.15
[29.2]
Process
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
Date code
1.756
[44.6]
Country of Origin
TERM
RD+
RD–
SD+
EA-COMCON-3
SD–
GND
KOYO ELECTRONICS INDUSTRIES CO., LTD.
Power
Circuit
Protection
1.126
[28.6]
<--->
Tools
Pneumatics
TERM
RD+
RD–
SD+
GND
Enclosures
1.00
[25.4]
Terminals
SD–
1.873
[47.6]
Safety
Appendix
Product
Index
Volume 14
w w w. a u to m a t i o n d i re c t . c o m / C - m o re - m i c ro
Operator Interface
e11-41
Part #
Index
C-more 4” Micro-Graphic Panel Accessories
Clear Screen Overlay
Optional clear screen overlay used to protect C-more 4” Micro-Graphic displays from minor scratches and
wear. Package contains 3 clear screen overlays.
Dimensions
Part No. EA-4-COV2
Units: inches [mm]
0.197
[5.0]
3.66
[93.0]
EA-4-COV2
2.85
[72.5]
<--->
Clear Screen Overlay Installation
Step 1
Remove the overlay from the
package
Step 2
Remove the paper backing
from the overlay
Step 4
Step 3
Align the overlay with the screen
and press the adhesive firmly
into place
0.157
[4.0]
Remove the protective film*
*Note: The overlay cover ships with a thin protective film on the
face that should be carefully removed after installation.
Volume 14
e11-42
Operator Interface
1 - 80 0 - 633 - 0405
C-more 4” Micro-Graphic Replacement Parts
The optional replacement parts can be used to replace damaged, worn or lost
C-more 4” Micro-Graphic panel components.
Systems
Overview
Programmable
Controllers
Replacement parts at a glance:
Part Number
Company
Information
Field I/O
Description
Price
EA-MG-BZ2-BRK
Replacement mounting bracket for 4” and 6” C-more Micro-Graphic panels and 6” keypad bezels.
Also used to mount the C-more 3” Micro-Graphic bezel EA-MG-BZ2. (pk of 8)
<--->
EA-MG-DC-CON
Replacement adapter DC power connector (pk of 5)
<--->
EA-MG4-GSK
Replacement mounting gasket for C-more 4” Micro-Graphic panels
<--->
EA-MG4-FKL
Replacement function key label insert for C-more 4” Micro-Graphic panels (pk of 4; 3 blank, 1 F1-F5
for landscape)
<--->
Software
C-more &
other HMI
Drives
Soft
Starters
Motors &
Gearbox
Steppers/
Servos
Motor
Controls
Proximity
Sensors
Panel Mounting Clips
Part No. EA-MG-BZ2-BRK
Photo
Sensors
DC Power Connector
Part No. EA-MG-DC-CON
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
(pk of 8)
Panel Gasket
Part No. EA-MG4-GSK
Temperature
Sensors
(pk of 5)
Pushbuttons/
Lights
Process
Function Keys Label Inserts
Part No. EA-MG4-FKL
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
Power
Circuit
Protection
Enclosures
(pk of 4; 3 blank, 1 F1-F5 for
landscape)
Tools
Pneumatics
Safety
Appendix
Product
Index
Volume 14
w w w. a u to m a t i o n d i re c t . c o m / C - m o re - m i c ro
Operator Interface
e11-43
Part #
Index
C-more 4” & 6” Micro-Graphic PLC Connections
Cabling requirements
When using the built in RJ12 serial port (Port1) on models
EA1-S6ML or EA1-S6MLW to connect with the CLICK,
ProductivitySeries, DL05, DL06, DL105, DL205, D3-350
and DL405 CPUs, your cabling choices are fairly simple.
• DV-1000CBL — connects to CLICK, P3-550, DL05, DL06, DL105,
DL205, D3-350 and D4-450 phone jack.
• D4-1000CBL — connects to all DL405 CPU 15-pin ports.
A maximum cable length of 10 feet between the EA1-S6ML
or EA1-S6MLW and the PLC is recommended when
powering the panel in Low-Power Mode from the PLC. The
EA1-T4CL and EA1-T6CL cannot be powered from a PLC.
Communication Ports
EA1-T4CL
Expansion
Connector
R**. 1 2 3 4 5
MODEL:EA1-T4CL
USB Type B
Programming Port1
R
INPUT:12-24V 0.19-0.38A
0.19-0.38A Class2
Class2
Date code:9048
MADE IN CHINA
7M17
IND.CONT.EQ.
EA1-T4CL＋094018001
EA1-T4CL＋
The C-more 4” and 6” Micro-Graphic panels can communicate through its built-in 15-pin serial port (Port2) via RS232, RS-422 and RS-485 using these cables.
• EA-2CBL — connects to CLICK, P3-550, DL05, DL105, DL205,
D3-350 and D4-450 phone jack.
• EA-2CBL-1 — connects to D2-250, D250-1, D2-260, DL06 VGA
connector.
•
•
•
•
•
•
•
6
LE
Signal
11 TXD+ (422/485)
2
TXD (232C)
7
CTS (232C)
12 TXD– (422/485)
3
RXD (232C)
8
RTS (232C)
13 Term. Resistor
4
Future
9
RXD+ (422/485)
14 do not use
5
Logic GND
10 RXD– (422/485)
15 do not use
RJ12 serial
communications Port1
R01. 1 2 3 4 5
MODEL:EA1-S6MLW
R
INPUT:12-24V 6.5W
Date code:****
MADE IN CHINA
LISTED
7M17
IND.CONT.EQ.
EA1-S6MLW + serial number
8
1
15
9
PLC 15-pin serial
communications Port2
Pin
Signal
1
Logic GND
2
not used
3
RXD (232C)
4
TXD (232C)
5
+5 VDC
6
Logic GND
RS-232
Pin
Signal
Pin
1
Frame GND
6
Signal
Pin
Signal
2
TXD (232C)
7
3
RXD (232C)
8
4
Future
9
5
Logic GND
10 RXD– (422/485)
15 do not use
LE
11
CTS (232C)
12 TXD– (422/485)
RTS (232C)
13 Term. Resistor
RXD+ (422/485)
14 do not use
TXD+ (422/485)
RS-232/422/485
EA1-T6CL
C-more 6” STN Micro-Graphic Port 1 to
CLICK PLC Port 2
USB Type B
Programming Port1
Expansion
Connector
C-more 6” STN
Micro-Graphic
Panel
PLC 15-pin serial
communications Port2
Port 1
R01. 1 2 3 4 5
MODEL:EA1-T6CL
R
INPUT:12-24V 6.5W Class2
Date code:****
MADE IN CHINA
LISTED
7M17
IND.CONT.EQ.
EA1-T6CL + serial number
Pin
Port 2
Signal
Expansion
Connector
AutomationDirect Productivity Series
AutomationDirect Do-more
AutomationDirect CLICK (Modbus)
DirectLOGIC K-sequence, DirectLOGIC DirectNET, DirectLOGIC
Modbus (Koyo Addressing)
Modbus RTU
Allen Bradley DF1 Full Duplex, Allen Bradley DF1 Half Duplex,
Allen Bradley PLC5 DF1, AB DH485
Omron Host Link (C200 Adapter, C500)
Omron FINS serial (CJ1, CS1)
GE SNPX (90/30, 90/70, Micro 90, VersaMax Micro)
Mitsubishi Melsec FX
Siemens PPI
Entivity Modbus RTU
AutomationDirect GS Drives
AutomationDirect SOLO Temperature Controllers
Mitsubishi Q/QnA
CLICK PLC
Pin
EA1-S6ML & EA1-S6MLW
6 5 4 3 2 1
•
Pin
Frame GND
RS-232/422/485
Drivers for your Controller
•
•
Signal
1
PLC 15-pin serial
communications Port2
The EA1-T4CL and EA1-T6CL can only communicate to a
controller through the 15-pin serial Port2; the USB Port1 on
these TFT models is for programming only.
•
•
•
•
Pin
DV-1000CBL
serial cable
8
1
15
9
Signal
Pin
1
Frame GND
6
LE
11 TXD+ (422/485)
2
TXD (232C)
7
CTS (232C)
Signal
Pin
12 TXD– (422/485)
Signal
3
RXD (232C)
8
RTS (232C)
13 Term. Resistor
4
Future
9
RXD+ (422/485)
14 do not use
5
Logic GND
10 RXD– (422/485)
15 do not use
RS-232/422/485
Volume 14
e11-60
Operator Interface
1 - 80 0 - 633 - 0405
C-more 4” & 6” Micro-Graphic Communication
Protocols & Cabling Chart
Contrroller Compatibility & Connection Chart
PLC
C-more 4” and 6” Micro-Graphic Panel
Panel to PLC Cabling Components Required for Specific Port and Protocol being used.
Family
CPU
**PLC Port Powered or
External DC Power Supply
PLC Port &
Type
Using panel’s RJ12 Port1
Protocol(s)
Supported
all versions
CLICK
Analog CPU’s
Productivity Series
Do-more
all versions
all versions
all versions
Port 1
RJ12 - 6 pin
Port 2
RJ12 - 6 pin
AutomationDirect
Modbus (CLICK)
Port3
Term block 3-pin
RS-232
RJ12 - 6 pin
RS-485 Port
Term block 3-pin
D0-DCM
DV-1000CBL**
RS-232
AutomationDirect
Productivity3000 Serial
(P3-550)
Port 2
RJ12 - 6 pin
Port 1
RJ12 - 6 pin
Port 2
RJ12 - 6 pin
Port 2
DB15HD
(female)
DV-1000CBL**
RS-232
C-more &
other HMI
AutomationDirect
Modbus (CLICK)
Port 2
DB15HD
(female)
Direct LOGIC
DL105
all versions
Port 2
DB15HD
(female)
Port 1
RJ12 - 6 pin
Proximity
Sensors
K-sequence,
Direct NET,
Modbus RTU
DV-1000CBL**
RS-232
K-sequence,
Direct NET,
Modbus RTU
EA-2CBL
RS-232
EA-2CBL
RS-232
K-sequence,
Direct NET,
Modbus RTU
K-sequence
K-sequence,
Direct NET,
Modbus RTU
DV-1000CBL**
+ FA-15HD
RS-232
EA-2CBL-1
RS-232
* See Note
RS-422
* See Note
RS-485
Modbus only
EA-2CBL
RS-232
K-sequence,
Direct NET,
Modbus RTU
DV-1000CBL**
+ FA-15HD
RS-232
DV-1000CBL**
RS-232
* See Note
RS-485
Modbus only
EA-2CBL
RS-232
DV-1000CBL**
RS-232
K-sequence,
Direct NET,
Modbus RTU
EA-2CBL-1
RS-232
* See Note
RS-422
DV-1000CBL**
RS-232
Port 1
RJ12 - 6 pin
D0-DCM
Motor
Controls
EA-2CBL
RS-232
DV-1000CBL**
+ FA-15HD
RS-232
Motors &
Gearbox
* See Note
RS-485
AutomationDirect
Do-more Serial
K-sequence,
Direct NET,
Modbus RTU
Soft
Starters
Steppers/
Servos
DV-1000CBL**
RS-232
DV-1000CBL**
RS-232
Drives
EA-2CBL
RS-232
AutomationDirect
Do-more Serial
Modbus RTU
Direct LOGIC
DL06
EA-2CBL
RS-232
* See Note
RS-485
Modbus RTU
all versions
Field I/O
Software
N/A
Port 1
RJ12 - 6 pin
Programmable
Controllers
Using panel’s Port2
DB 15-pin - female
Protocol(s)
Components &
Supported
Network Type
AutomationDirect
Productivity3000 Serial
(P3-550)
K-sequence,
Direct NET,
Modbus RTU
Systems
Overview
External DC Power Supply
N/A
Port 1
RJ12 - 6 pin
Direct LOGIC
DL05
Components &
Network Type
Company
Information
EA-2CBL-1
RS-232
* See Note
RS-422
Modbus RTU
* See Note
RS-485
Modbus only
K-sequence
EA-2CBL
RS-232
* Note: See the C-more Micro-Graphic Hardware User Manuals (P/N: EA1-MG6-USER-M or EA1-TCL-M), Chapter 6: PLC Communications, for wiring
diagrams that the user can use to construct their own cables. The manual is available for download at www.automationdirect.com.
** Note: For EA1-S6ML and EA1-S6MLW,the PLC can provide 5 VDC through this cable. No external 12-24 VDC souce is required, however, screen
brightness is diminished and the alarm beep will not function. Low-Power Mode should be used during initial programming only. Connect
an external Class 2, 12-24 VDC power source when the panel is installed in its application. EA1-T4CL and EA1-T6CL require an external
power supply. PLC Compatibility & Connection Chart continued on next page.
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
Process
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
Power
Circuit
Protection
Enclosures
Tools
Pneumatics
Safety
Appendix
Product
Index
Volume 14
w w w. a u to m a t i o n d i re c t . c o m / C - m o re - m i c ro
Operator Interface
e11-61
Part #
Index
C-more 4” & 6” Micro-Graphic Communication
Protocols & Cabling Chart (cont’d)
Controller Compatibility & Connection Chart
PLC
C-more 4” and 6” Micro-Graphic Panel
Panel to PLC Cabling Components Required for Specific Port and Protocol being used.
Family
CPU
Port & Type
**PLC Port Powered or
External DC Power Supply
Protocol(s)
Supported
Components &
Network Type
Using panel’s Port2
DB 15-pin - female
Protocol(s)
Components &
Supported
Network Type
Port 1
RJ12 - 6 pin
K-sequence
DV-1000CBL**
RS-232
K-sequence
Port 1
RJ12 - 6 pin
K-sequence
Port 2
RJ12 - 6 pin
K-sequence,
Direct NET,
Using panel’s RJ12 port 1
D2-230
D2-240
DV-1000CBL**
RS-232
Port 2
DB15HD
(female)
K-sequence,
Direct NET,
Modbus RTU
DV-1000CBL**
+ FA-15HD
RS-232
D2-260
Port 2
DB15HD
(female)
K-sequence,
Direct NET,
K-sequence,
Direct NET,
Modbus RTU
EA-2CBL
RS-232
EA-2CBL-1
RS-232
* See Note
RS-422
EA-2CBL
RS-232
K-sequence,
Direct NET,
Modbus RTU
K-sequence,
Direct NET,
Modbus RTU
EA-2CBL
RS-232
EA-2CBL
RS-232
DV-1000CBL**
RS-232
Port 1
RJ12 - 6 pin
Direct LOGIC
DL205
K-sequence
DV-1000CBL**
RS-232
D2-250-1
D2-250-1
External DC Power Supply
DV-1000CBL
+ FA-15HD
RS-232
EA-2CBL-1
RS-232
* See Note
RS-422
Modbus RTU
* See Note
RS-485
Modbus only
EA-4CBL-2
RS-232
D2-DCM
Port 1
DB 25 pin
(female)
K-sequence,
Direct NET,
Modbus RTU
See Note
RS-232
Direct NET
WINPLC
Port 1
RJ12 - 6 pin
Modbus RTU
DV-1000CBL**
RS-232
Modbus RTU
EA-2CBL
RS-232
Direct NET
EA-4CBL-2
RS-232
Direct NET
EA-4CBL-2
RS-232
Direct NET
*See Note
RS-422
D3-330 or
D3-340
D3-340
Direct LOGIC
DL305
D3-350
D3-DCM
D3-350 only
D3-232-DCU
DB 25 pin
(female)
D3-422-DCU
DB 25 pin
(female)
Port 1
RJ11 - 4 pin
N/A
Direct NET
OP-3CBL-1**
RS-232
Direct NET
Port 2
RJ11 - 4 pin
Direct NET,
Modbus RTU
Direct NET,
Modbus RTU
Port 1
RJ12 - 6 pin
K-sequence,
Direct NET
DV-1000CBL**
RS-232
K-sequence,
Direct NET
Port 2
DB 25 pin
(female)
K-sequence,
Direct NET,
Modbus RTU
*See Note
RS-232
K-sequence,
Direct NET,
Modbus RTU
Port 1
DB 25 pin
(female)
K-sequence,
Direct NET,
Modbus RTU
*See Note
RS-232
Direct NET
* See Note
RS-422
EA-3CBL
RS-232
EA-2CBL
RS-232
EA-4CBL-2
RS-232
See Note
RS-422
EA-4CBL-2
RS-232
*See Note
RS-422
* Note: See the C-more Micro-Graphic Hardware User Manuals (P/N: EA1-MG6-USER-M or EA1-TCL-M), Chapter 6: PLC Communications, for wiring
diagrams that the user can use to construct their own cables. The manual is available for download at www.automationdirect.com.
** Note: For EA1-S6ML and EA1-S6MLW,the PLC can provide 5 VDC through this cable. No external 12-24 VDC souce is required, however, screen
brightness is diminished and the alarm beep will not function. Low-Power Mode should be used during initial programming only. Connect
an external 12-24 VDC power source when the panel is installed in its application. EA1-T4CL and EA1-T6CL require an external power
supply. PLC Compatibility & Connection Chart continued on next page.
Volume 14
e11-62
Operator Interface
1 - 80 0 - 633 - 0405
C-more 4” & 6” Micro-Graphic Communication
Protocols & Cabling Chart (cont’d)
Controller Compatibility & Connection Chart
PLC
C-more 4” and 6” Micro-Graphic Panel
Panel to PLC Cabling Components Required for Specific Port and Protocol being used.
Family
CPU
Port & Type
**PLC Port Powered or
External DC Power Supply
Using panel’s RJ12 port 1
Protocol(s)
Supported
Components &
Network Type
K-sequence
D4-1000CBL
or DV-1000CBL**
& FA-CABKIT
RS-232
Programmable
Controllers
Field I/O
Software
C-more &
other HMI
Drives
EA-4CBL-1
RS-232
Soft
Starters
K-sequence,
Direct NET
DV-1000CBL
& FA-CABKIT
RS-232
K-sequence,
Direct NET
EA-4CBL-2
RS-232
*See Note
RS-422
Steppers/
Servos
Port 0
DB 15 pin
(female)
K-sequence
D4-1000CBL
or DV-1000CBL**
& FA-CABKIT
RS-232
K-sequence
EA-4CBL-1
RS-232
Port 1
DB 25 pin
(female)
K-sequence,
Direct NET
DV-1000CBL**
& FA-CABKIT
RS-232
K-sequence,
Direct NET
EA-4CBL-2
RS-232
*See Note
RS-422
Port 0
DB 15 pin
(female)
K-sequence
D4-1000CBL
or DV-1000CBL**
& FA-CABKIT
RS-232
K-sequence
EA-4CBL-1
RS-232
Port 1
DB 25 pin
(female)
K-sequence,
Direct NET,
Modbus RTU
DV-1000CBL**
& FA-CABKIT
RS-232
K-sequence,
Direct NET,
Modbus RTU
EAA-4CBL-2
RS-232
*See Note
RS-422
K-sequence,
Direct NET,
Modbus RTU
*See Note
RS-422
Pressure
Sensors
K-sequence,
Direct NET
EA-2CBL
RS-232
Temperature
Sensors
D4-430
Port 1
DB 25 pin
(female)
D4-440
D4-450
Using panel’s Port2
DB 15-pin - female
Protocol(s)
Components &
Supported
Network Type
Systems
Overview
K-sequence
Port 0
DB 15 pin
(female)
Direct LOGIC
DL405
External DC Power Supply
Company
Information
Port 3
DB 25 pin
(female)
N/A
Port 2
RJ12 - 6 pin
K-sequence,
Direct NET
DV-1000CBL**
RS-232
D4-DCM
Port 1
DB 25 pin
(female)
K-sequence,
Direct NET,
Modbus RTU
*See Note
RS-232
SOLO
N/A
Data +/terminals
N/A
SOLO Temperature
Controller
GS Drives
N/A
RS-485 Interface
N/A
GS Drives Serial GS
Drives TCP/IP (GS-EDRV)
Direct NET
EA-4CBL-2
RS-232
*See Note
RS-422
*See Note
RS-485
*See Note
RS-485
* Note: See the C-more Micro-Graphic Hardware User Manuals (P/N: EA1-MG6-USER-M or EA1-TCL-M), Chapter 6: PLC Communications, for wiring
diagrams that the user can use to construct their own cables. The manual is available for download at www.automationdirect.com.
** Note: For EA1-S6ML and EA1-S6MLW,the PLC can provide 5 VDC through this cable. No external 12-24 VDC souce is required, however, screen
brightness is diminished and the alarm beep will not function. Low-Power Mode should be used during initial programming only. Connect
an external Class 2, 12-24 VDC power source when the panel is installed in its application. EA1-T4CL and EA1-T6CL require an external
power supply. PLC Compatibility & Connection Chart continued on next page.
Motors &
Gearbox
Motor
Controls
Proximity
Sensors
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
Pushbuttons/
Lights
Process
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
Power
Circuit
Protection
Enclosures
Tools
Pneumatics
Safety
Appendix
Product
Index
Volume 14
w w w. a u to m a t i o n d i re c t . c o m / C - m o re - m i c ro
Operator Interface
e11-63
Part #
Index
C-more 4” & 6” Micro-Graphic Communication
Protocols & Cabling Chart (cont’d)
Controller Compatibility & Connection Chart
PLC
C-more 4” and 6” Micro-Graphic Panel
Panel to PLC Cabling Components Required for Specific Port and Protocol being used.
Family
CPU
Port & Type
**PLC Port Powered or
External DC Power Supply
Using panel’s RJ12 port 1
Protocol(s)
Supported
Components &
Network Type
External DC Power Supply
Using panel’s Port2
DB 15-pin - female
Protocol(s)
Components &
Supported
Network Type
8-pin
mini-din port
DF1 Full Duplex
DF1 Half Duplex
EA-MLOGIX-CBL
RS-232
RJ45 8-pin
phone plug
DH485/AIC/AIC+
EA-DH485-CBL
RS-232
5/03, 5/04,
5/05
9-pin
D-sub port
DF1 Full Duplex
DF1 Half Duplex
EA-SLC-232-CBL
RS-232
5/01, 5/02,
5/03
RJ45 8-pin
phone plug
DH485/AIC/AIC+
EA-DH485-CBL
RS-232
Allen-Bradley
ControlLogix
all
9-pin
D-sub port
DF1 Full Duplex
DF1 Half Duplex
EA-SLC-232-CBL
RS-232
Allen-Bradley
CompactLogix
all
9-pin
D-sub port
DF1 Full Duplex
DF1 Half Duplex
EA-SLC-232-CBL
RS-232
Allen-Bradley
FlexLogix
all
9-pin
D-sub port
DF1 Full Duplex
DF1 Half Duplex
EA-SLC-232-CBL
RS-232
25-pin
D-sub port
DF1 Full Duplex
EA-PLC5--232-CBL
RS-232
RJ45 8-pin
phone plug
DH485/AIC/AIC+
EA-DH485-CBL
RS-232
Allen-Bradley
MicroLogix
1000, 1100,
1200, 1400, 1500
Allen-Bradley
SLC500
Allen-Bradley
PLC5
all
GE
90/30
15-pin
D-sub port
Micro 90,
VersaMax
Micro
RJ45
Port 1
15-pin
D-sub port
Port 2
Melsec
FX Series
Mitsubishi
SNPX
N/A
EA-90-30-CBL
RS-422
*See Note
RS-232
EA-90-30-CBL
RS-422
25-pin
D-sub port
CPU Direct
EA-MITSU-CBL
RS-422
8-pin
mini-din port
EA-MITSU-CBL-1
RS-422
9-pin
D-sub port
*See Note
RS-232
Q / QnA
Q / QnA
6-pin
mini-din port
*See Note
RS-232
C200 (Adapter),
C500
25-pin
D-sub port
Host Link
EA-OMRON-CBL
RS-232
CJ1, CS1,
CQM1,
CPM1,
CPM2,
C200
9-pin
D-sub port
FINS
*See Note
RS-232
Modicon
984 CPU,
Quantum
113 CPU,
AEG
Modicon
Micro Series
110 CPU
varies
Modbus RTU
*See Note
RS-232
Siemens
S7-200
CPU
9-pin
D-sub port
0 or 1
PPI
*See Note
RS-485
Omron
* Note: See the C-more Micro-Graphic Hardware User Manuals (P/N: EA1-MG6-USER-M or EA1-TCL-M), Chapter 6: PLC Communications, for wiring
diagrams that the user can use to construct their own cables. The manual is available for download at www.automationdirect.com.
** Note: For EA1-S6ML and EA1-S6MLW,the PLC can provide 5 VDC through this cable. No external 12-24 VDC souce is required, however, screen
brightness is diminished and the alarm beep will not function. Low-Power Mode should be used during initial programming only. Connect
an external Class 2, 12-24 VDC power source when the panel is installed in its application. EA1-T4CL and EA1-T6CL require an external
power supply.
Volume 14
e11-64
Operator Interface
1 - 80 0 - 633 - 0405

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project