HBA2GTechnicalManual.pdf

HBA2GTechnicalManual.pdf
HBA2G RACK OVEN
TECHNICAL MANUAL
SPECIFICATION SHEET
INSTALLATION INSTRUCTIONS
OPERATION INSTRUCTIONS
CLEANING INSTRUCTIONS
MAINTENANCE INSTRUCTIONS
TROUBLE SHOOTING INSTRUCTIONS
WIRING DIAGRAMS
CATALOG OF REPLACEMENT PARTS
SMARTPARTS™ USER GUIDE
RECOMMENDED SPARE PARTS LIST
Need other Hobart Services?
Warranty Registration
Delivery and Installation
Preventive Maintenance
Hobart Service Contracts
Extended Warranty Contracts
Parts and Accessories
Specialty Programs
Water Treatment Programs
Air Filtration System
Item # _____________________________________
Quantity ___________________________________
C.S.I. Section 11400
HBA2G DOUBLE RACK
OVEN – GAS
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
STANDARD FEATURES
MODEL
■ Advanced digital programmable control panel
includes:
- Bake/steam timers
- Cool-down mode
- Vent mode
- Four stage baking
- Auto on/off control
- Auto vent
- 99 menus
- Energy saving idle mode
■ 300,000 BTU in-shot burner system
■ High-temp stainless steel tubular heat
exchanger with weldless construction for
longer life
■ Heavy duty rack lift with rack jam warning
system utilizing slip clutch feature
■ Soft start rotation system
■ Stainless steel interior and exterior construction
■ Oven body shipped in two main sections for
ease of installation
■ Flush floor with patented adjustable floor
construction provides easy access - no ramp
required
■ Field reversible bake chamber door
■ Hood with plenum for Type II installation
■ Space saving 72" wide x 62" deep footprint
(less canopy)
■ Wide viewing glass (21" W x 57.5" H) with triple
pane glass for reduced heat loss and cooler
working area in front of oven
■ Patented self-contained cast spherical steam
system
■ Pre-plumbed water regulator
■ Built-in rollers and levelers for ease of
installation
■ Single point 10" vent connection
■ Stainless steel “B” style rack lift
■ Capacity - two single racks or one double rack
■ One year parts/labor warranty
❑ HBA2G – Double Rack Oven, Gas
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
Back-up control
Propane gas
Floor extender kit
Shipped assembled (less canopy/steam
system)
Aluminum or stainless steel oven racks
High output 350,000 BTU burner system
Hood with grease filters – Type 1 (UL listed to
Standard UL 710 and meets all requirements of
NFPA-96)
“C” style rack lift
Kosher package
50 Hz available, consult factory for details
Specifications, Details and Dimensions on Back.
ANSI/NSF Standard #4
City of LA (M-910049), City of NY (MEA 430-05-E)
and State of MA (C3-0606-363)
Page 1 of 2
HBA2G DOUBLE RACK OVEN – GAS
F-40014 – HBA2G Double Rack Oven – Gas
OPTIONS AND ACCESSORIES
HBA2G DOUBLE RACK
OVEN – GAS
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
SPECIFICATIONS
1. Water—1⁄2" NPT. Cold water @ 30 psi. (207 kPa) minimum @ 4.5 GPM
(.29 liters/sec) flow rate. Water supply must have the proper hardness,
pH and chloride concentration. Consult your local Hobart service office,
water company and/or water conditioner dealer before installation.
Recommended water hardness range: 2-4 grains per gallon
Recommended pH range: 7.0 to 8.0
Acceptable range for chloride concentration: 0-30 ppm
2. Drain—Choose either rear or front drain and plug the drain connection
that is not in use. Route to air-gap drain.
Rear drain: 3⁄4" FNPT; Kit is provided to extend drain to left or right side of
oven. Front drain: 3⁄8" FNPT.
3. Gas—11⁄4" NPT. Connect Point
Gas
Input Rate
Natural Gas
Standard
Propane Gas
Natural Gas
Optional
Propane Gas
300,000 BTU/hr.
(88 kJ/s)
300,000 BTU/hr.
(88 kJ/s)
350,000 BTU/hr.
(102 kJ/s)
350,000 BTU/hr.
(102 kJ/s)
Supply Pressure
(flowing)
5-14" w.c.
(1.25-3.5 kPa)
10-14" w.c.
(2.5-3.5 kPa)
6-14" w.c.
(1.5-3.5 kPa)
12-14" w.c.
(3.0-3.5 kPa)
4. Electrical—2 supplies required.
1) 120/60/1. 15 amps – dedicated circuit required max. 20A
2) 208-230/60/3
4.4-4.2 amps
220/60/1
6.8 amps
460/60/3
2.1 amps
5. Hood Vent—10" diameter connection collar. Type 2 (standard) minimum
3
750 cfm (21.3 m /min) required with 0.4" w.c. (100 Pa) static pressure drop
through hood. 10" to 8" duct adapter provided for Type 2 applications
only, increases static pressure drop requirement to 0.6" w.c. (150 Pa). Type
SECTION
Heating
Bake
Hood
Door
W x L x H (CRATED)
71" x 111" x 47"
71" x 111" x 47"
23" x 98" x 40"
11" x 78" x 50"
Shipping Total
1 UL Listed (optional) minimum 900 cfm (25.5 m3/min) required with 0.6"
w.c. (150 Pa) static pressure drop through hood. Customer to supply duct
and ventilator fan per local code. Air proving switch factory installed and
integrated with burner system operation. Oven provided relay with max. 6.0
amp 1⁄3 H.P. @ 120V output for fan operation.
NOTES
1. The purchaser is responsible for all installation costs and for providing:
Disposal of packing materials; labor to unload oven upon arrival;
installation mechanics; and all local service connections including
electricity, vents, gas, water and drain per local code. A factory technician
or factory authorized installation technician must supervise and approve
any installation. In order to validate the warranty, the start-up must be
performed by an Authorized Servicer.
2. All services must comply with federal, state and local codes. Input rates
will be reduced when oven installed at elevations over 3,000' (915 m).
Consult factory for elevation correction.
3. CAUTION – To reduce the risk of fire, the appliance is to be mounted on
floors of non-combustible construction with non-combustible flooring and
surface finish and with no combustible material against the underside
thereof, or on non-combustible slabs or arches having no combustible
material against the underside. IMPORTANT: Do not route utilities (wiring,
plumbing, etc.) in or under the non-combustible floor beneath the oven.
4. For proper installation, floor should be level within 1⁄8" per foot not to
exceed 3⁄4". Floor anchors require minimum of 1" thick solid floor substrate.
5. Minimum clearances to combustible construction: 0 inches from sides
and back; 18" from top (99.5"). 10 feet minimum ceiling height for service
access and tilt up for installation.
6. Ventilator fan is required. Consult local authorities to determine whether
TYPE 1 (grease) or TYPE 2 (vapor) duct will be required. Hood connection
suitable for connection to Type B vent, except when products of baking are
grease laden.
7. Actual weight: 3,520 lbs.;
Shipping weight: 4,185 lbs. (freight class 70)
PALLET WT. (lbs.) / CU. FT.
1,965
214.4
1,670
214.4
270
52.2
280
24.9
4,185
505.9
W x D x H (ACTUAL)
36" x 62" x 104"
36" x 62" x 100"
18" x 72" x 31"
44.5" x 5" x 74"
DETAILS AND DIMENSIONS
Highest Point on Oven—104.0" (264.2 cm)
Front View
Side View
1
Water
2
Drain
3
Gas
4
Electrical
5
Hood Vent
Top View
As continued product improvement is a policy of Hobart, specifications are subject to change without notice.
Page 2 of 2
F-40014 (REV. 12/07)
F-40014 – HBA2G Double Rack Oven – Gas
LITHO IN U.S.A. (H-01)
Printed On Recycled Paper
O
P
E
R
A
T
I
O
N
HBA RACK OVEN
WITH ADVANCED ELECTRONIC
OVEN CONTROL
MODELS
HBA1G
HBA2G
GAS
GAS
HBA1E
HBA2E
ELECTRIC
ELECTRIC
FOR OVENS MANUFACTURED AFTER MARCH 2005
701 S. RIDGE AVENUE
TROY, OHIO 45374-0001
937 332-3000
www.hobartcorp.com
FORM 36801 (May 2005)
IMPORTANT FOR YOUR SAFETY
POST IN A PROMINENT LOCATION THE INSTRUCTIONS TO BE FOLLOWED IN THE
EVENT THE SMELL OF GAS IS DETECTED. THIS INFORMATION CAN BE OBTAINED
FROM THE LOCAL GAS SUPPLIER.
IMPORTANT
IN THE EVENT A GAS ODOR IS DETECTED, SHUT DOWN
UNITS AT MAIN SHUTOFF VALVE AND CONTACT THE LOCAL
GAS COMPANY OR GAS SUPPLIER FOR SERVICE.
FOR YOUR SAFETY
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE
VAPORS OR LIQUIDS IN THE VICINITY OF THIS OR ANY
OTHER APPLIANCE.
WARNING: IMPROPER INSTALLATION, ADJUSTMENT,
ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE
PROPERTY DAMAGE, INJURY OR DEATH. READ THE
INSTALLATION, OPERATING AND MAINTENANCE
INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR
SERVICING THIS EQUIPMENT.
IN THE EVENT OF A POWER FAILURE, DO NOT ATTEMPT TO
OPERATE THIS DEVICE.
KEEP AREA AROUND OVEN CLEAR OF COMBUSTIBLES. DO
NOT OBSTRUCT COMBUSTION AND VENTILATION OPENINGS
ON THE OVEN.
© HOBART, 2005
–2–
MODEL HBA RACK OVEN
–3–
TABLE OF CONTENTS
GENERAL ............................................................................................................................................ 5
INSTALLATION .................................................................................................................................... 5
OPERATION ........................................................................................................................................ 6
HBA Advanced Controls ................................................................................................................ 6
Auto On/Off Timer and Clock ................................................................................................. 8
Basic Operation ....................................................................................................................... 9
Cooling Oven ......................................................................................................................... 10
Operational Hints ................................................................................................................... 10
Back-Up Control Operation (optional) ........................................................................................ 11
Safety Alarm ................................................................................................................................. 11
Food Service Steam Mode .......................................................................................................... 12
Kosher Operation Mode (ovens equipped with Kosher Package) ............................................ 12
Programming the Oven ............................................................................................................... 13
Customized Operation ................................................................................................................. 17
Shutdown ...................................................................................................................................... 19
Restarting Oven ........................................................................................................................... 19
Cleaning ........................................................................................................................................ 20
MAINTENANCE ................................................................................................................................. 21
General ......................................................................................................................................... 21
Preventive Maintenance .............................................................................................................. 21
Service and Parts Information ..................................................................................................... 21
TROUBLESHOOTING ....................................................................................................................... 22
Burners Will Not Light on Gas Oven ........................................................................................... 22
Alarms and Display Messages .................................................................................................... 22
Other Troubleshooting Topics ..................................................................................................... 22
OWNER PREVENTIVE MAINTENANCE PROCEDURE ................................................................. 23
Introduction ................................................................................................................................... 23
Preventive Maintenance Procedure ............................................................................................ 23
–4–
OPERATION AND CARE OF
MODEL HBA RACK OVEN
SAVE THESE INSTRUCTIONS
GENERAL
The Hobart HBA Rack Oven accommodates a roll-in rack. It is equipped with an electronic oven control
for baking and/or steaming applications. A mechanism in the oven ceiling rotates the rack during
baking.
Model HBA1G is rated at 180,000 Btu/hr, natural or propane gas.
Model HBA2G is rated at 300,000 Btu/hr or 350,000 Btu/hr, natural or propane gas.
Model HBA1E is rated at 34.2 kW.
Model HBA2E is rated at 51.3 kW.
Hobart Rack Ovens are produced with quality workmanship and material. Proper installation, usage
and maintenance of your oven will result in many years of satisfactory performance.
It is suggested that you thoroughly read this manual and carefully follow the instructions provided.
INSTALLATION
The Hobart HBA Rack Oven must be installed or moved only by authorized Hobart Bakery Systems
trained service technicians.
–5–
OPERATION
HBA ADVANCED CONTROLS
–6–
Control Guide - Advanced
Button
POWER
Action
Display
Press to turn the oven
ON or OFF.
Control panel displays are lit when the oven is on. Oven
defaults to Program 0. If oven is turned off and back on
within 2 minutes, the oven will come up in the last mode
and oven setting.
AUTO ON/OFF
TIMER
Press to enter current time
or time for oven to
automatically turn on or
off, when corresponding
Auto On Time or Auto
Off Time button is pressed.
The AUTO ON/OFF TIMER window displays the current
time, or the time the oven will automatically turn on or
off.
AUTO ON TIME
Press to set the desired
time of oven to
automatically turn ON.
The AUTO ON/OFF TIMER window displays the time
the oven will automatically turn on.
AUTO OFF TIME
Press to set the desired
time of oven to
automatically turn OFF.
The AUTO ON/OFF TIMER window displays the time
the oven will automatically turn off.
Press to turn the automatic
timer ON or OFF.
The indicator light beside the timer ON/OFF button is
lit when the function is enabled.
SET TEMP
Press to set the desired
temperature
(5-degree increments).
The SET TEMP window displays the set temperature.
The HEAT ON light is lit while the oven is heating. The
actual temperature in the oven cavity is displayed in the
OVEN TEMP window.
BAKE TIMER
Press to enter
the BAKE time
(1-minute increments).
The BAKE TIMER window displays the amount of time
for the current baking cycle. The minutes set are the
left two digits and minutes remaining are the right two
digits. The windows can be set to display hours and
minutes remaining. The ON light is lit when bake time
is active. See Customized Operation to configure this
setting.
Press to enter the
STEAM time
(5-second increments in
Bakery mode; 1-second
increments in Food Service
mode).
The STEAM TIMER window displays the amount of
time set for the steam cycle. The ON light is lit when
the steam system is active.
Press to enter the
DELAY time
(1-minute increments).
The DELAY TIMER window displays the amount of
time set for the circulation blower delay cycle.
Press to start the
BAKE TIMER.
The ON light blinks when the BAKE TIMER is active.
TIMER ON/OFF
STEAM TIMER
AIRFLOW
DELAY
–7–
Control Guide - Advanced (cont)
Button
PROGRAM
STEP
Action
Display
Press to stop the BAKE
TIMER or silence the
beeper after the BAKE
TIMER has timed out.
The ON light is off when the BAKE TIMER is inactive.
Press to select bake
program.
The PROGRAM window displays the number of the
current program.
Press to select one of
four baking steps.
The corresponding indicator light will be lit (1 to 4),
depending on which step is selected.
Press to open or
close the vent.
The indicator light above the VENT button is lit when the
vent cycle is enabled.
Auto On/Off Timer and Clock
The Auto ON/OFF Timer display shows the current time of day. To set the clock, the control must be
turned on. Press and hold either arrow button to initiate clock setting, then adjust time using arrow
buttons. A few seconds after the time is adjusted, the colon in the time display will resume flashing.
Timer Settings
The oven can be set to turn itself on and off. After the AUTO ON/OFF TIMER is set, the POWER ON
OFF button can be pressed to turn the oven off. This will not disrupt the AUTO ON/OFF setting.
Electrical power to the oven must remain on.
1. To set the oven to turn on, press and hold the AUTO ON TIME button. The previously entered
start time will appear in the display. Use the UP and DOWN arrows to adjust the start time. Then
release the AUTO ON TIME button.
2. To set the oven to turn off, press and hold the AUTO OFF TIME button. The previously entered
end time will appear in the display. Use the UP and DOWN arrows to adjust the end time. Then
release the AUTO ON TIME button.
3. To enable the automatic start, press and hold the TIMER ON/OFF button until the indicator LED
to the right of the TIMER ON/OFF button is illuminated.
NOTE: When using AUTO ON/OFF to preheat the oven, if the oven is not disturbed for the time set
in parameter P17, it will revert to the Setback temperature stored in parameter P18 setup.
Backup Battery
The clock is backed up by a lithium battery which keeps the clock circuitry operating when all external
power is off. If the battery becomes low or dead while the external power is off, the display will read
12:00 (12 hr mode) or 0:00 (24 hr mode) and will not increment until a new time is set. The clock will
operate with a dead or missing battery, but must be set each time external power is turned on. Batteries
should be replaced when low or dead to avoid corrosive damage to the circuitry. Contact your local
Hobart Bakery Systems service office.
–8–
Oven Preheat
For best results, the oven must be preheated to bake temperature before baking begins.
1. The door must be closed for oven to heat. The rack carrier will lift and rotate only during timed
bake.
NOTE: The rack carrier will be in the unload position from the last bake.
2. Press the POWER ON OFF button to turn the oven on.
3. Press the UP or DOWN arrows next to the SET TEMP window to enter the desired baking
temperature. Actual temperature of the oven will appear in the OVEN TEMP window.
4. Allow 50 minutes after the oven has reached the set temperature for the steam system to charge.
5. The oven is now ready for baking operations.
Basic Operation
WARNING: THE OVEN AND ITS PARTS ARE HOT. TO PREVENT BURNS, USE HOT PADS OR
PROTECTIVE MITTS WHEN LOADING OR UNLOADING THE OVEN.
WARNING: HOT AIR AND STEAM ARE RELEASED FROM THE OVEN INTERIOR WHEN THE
LOADING DOOR IS OPENED. TO AVOID BURNS, OPEN THE DOOR SLOWLY AND KEEP CLEAR
OF THE OPENING.
1. Preheat the oven. (See Oven Preheat) for HBA Advanced Controls.
2. Manually select baking settings:
•
•
Press the UP or DOWN arrows next to BAKE TIMER to enter the desired value.
Press the UP or DOWN arrows next to STEAM TIMER to enter the desired value.
•
Press the UP arrow next to AIRFLOW DELAY to enter the desired value.
•
The steam and airflow delay settings are optional and can be left at 0 if desired.
3. Slowly open the door and load product.
4. Close the door and press the START button. The ON light in the BAKE TIMER window blinks as
the timer counts down.
5. Rack lifts from floor and rotates clockwise.
6. The oven beeps after the BAKE TIMER times out. Press STOP to silence the beeper.
7. Open door. Allow rack carrier to stop and lower. Remove product
–9–
Loading Procedure
1. Type B and C rack carriers are equipped with stops on both ends. For B lifts, ensure stop flap is
in the up position to load the rack on the rack carrier. For C lifts, push rack stop to the left after
rack is loaded.
2. Roll the rack into the oven so the end brackets channel onto the rack carrier. When using racks
equipped with pan stops, load racks so stops will prevent movement of trays toward user when
racks are unloaded.
3. Close the loading door. The rack carrier will lift and rotate only during timed bake.
Unloading Procedure
WARNING: THE OVEN AND ITS PARTS ARE HOT. TO PREVENT BURNS, USE HOT PADS OR
PROTECTIVE MITTS WHEN LOADING OR UNLOADING THE OVEN.
WARNING: HOT AIR AND STEAM ARE RELEASED FROM THE OVEN INTERIOR WHEN THE
LOADING DOOR IS OPENED. TO AVOID BURNS, OPEN THE DOOR SLOWLY AND KEEP CLEAR
OF THE OPENING.
1. Press STOP or open the loading door to silence the beeper.
2. Wait for the rack carrier to stop and lower.
3. For B lifts, push the rack stop down to unload the rack from the rack carrier. For C lifts, push rack
stop to the right to open.
4. Roll the rack from the rack carrier.
5. Close the loading door.
Cooling Oven
•
To cool the oven more than 20 degrees below its current temperature; change SET TEMP to
the desired new temperature, open the oven door, and press VENT. The SET TEMP display will
alternate between ‘COOL’ and the SET TEMP until the oven has cooled. When the oven has
reached the set temperature, the alarm will beep and the control will return to normal operation.
Closing the oven door or pressing any control button during Cool-Down mode will also return
the control to normal operation.
•
The VENT control can provide a means of cooling down the oven. When the oven is in the OFF
mode and the door is open, press the VENT button once to start or stop the circulation fan. Vent
light will be lit. The fan will also stop when the door is closed or the oven is put into the ON mode.
•
If the oven temperature is more than 20 degrees higher than the set temperature, and the bake
timer is not activated, the oven will automatically open the VENT. The VENT will remain open
until the oven temperature is within 20 degrees of the set temperature.
Operational Hints
•
On the initial startup, the oven temperature will default to the factory setting of 375°F (191°C)
unless changed.
•
During a baking cycle, the START and STOP buttons control the BAKE, STEAM and AIRFLOW
DELAY settings only. They have no effect on the oven heat. When the BAKE TIMER times out,
the oven heat stays at the set temperature. Care should be taken not to overbake products.
•
To adjust the temperature during a baking cycle, press the UP or DOWN arrows in the Oven
Temp section to enter the new temperature.
– 10 –
•
To adjust steam settings, press the corresponding arrows to enter the new values. The steam
timer cannot be adjusted during bake operation.
•
You can adjust the time remaining with the arrows. The set time remains unchanged unless you
“0” out the remaining time.
•
If the door is opened at any time during the baking cycle, the TEMP, BAKE TIME, STEAM and
AIRFLOW DELAY settings will pause. Close the door to resume all functions.
•
The AIRFLOW DELAY option minimizes airflow at the beginning of the baking cycle. The heat
is off while the AIRFLOW DELAY is activated.
•
The oven monitors the heating system by comparing the current oven temperature to the set
temperature. If a problem arises in the heating system or there is a heating system failure, both
temperature displays will flash. If the problem continues, contact your authorized Hobart Bakery
Systems service agency.
BACK-UP CONTROL OPERATION (OPTIONAL)
If the main control panel ceases to function properly, baking can continue with the use of the Back-up
Controls, if equipped. The Back-up Controls are located behind the control door on rear wall of the
component panel.
To activate the Back-up Controls, flip the toggle switch to BACK-UP position. Temperature and steam
are now controlled by the thermostat dial and steam rocker switches, located on the back-up control
panel. Set the thermostat dial to the desired temperature. Once the oven has reached temperature,
steam can be injected by pressing and holding the steam rocker switch up to a maximum of 20 seconds.
More than this will cool down the oven and steamer excessively. Venting the oven must be done
manually by opening the door. The rack carrier will stop and lower when door is open. Close door after
venting is complete for rack carrier to lift and resume rotating.
SAFETY ALARM (STANDARD FEATURE, NO PARAMETER SETUP REQUIRED)
If the temperature at the probe is in the range of 570 - 600 degrees Fahrenheit for 10 seconds, the unit
will do the following:
1. Shut off all features.
2. Sound an alarm.
3. Flash the OVEN TEMP display (actual temperature is displayed).
4. Display the letters ‘SHdn’ in the BAKE TIMER display.
The oven will remain in the shutdown mode until the 120VAC power is removed from the controller.
WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW
LOCKOUT / TAGOUT PROCEDURES. THERE MAY BE MULTIPLE CIRCUITS. BE SURE ALL
CIRCUITS ARE DISCONNECTED.
WARNING: SHUT OFF GAS. CONTACT YOUR AUTHORIZED HOBART BAKERY SYSTEMS
SERVICE OFFICE.
– 11 –
FOOD SERVICE STEAM MODE
This mode can be used to provide steam on a periodic basis throughout operation. When this mode
is enabled, the STEAM TIMER controls how many seconds of steam are provided to the oven, while
a value entered in the Parameter 14 (P14) setup controls how frequently the steam is operated.
To enable the Food Service Steam mode:
1. Enter the parameter set up mode by pressing and holding the START button and POWER ON
OFF button.
2. Select Parameter 14.
3. If the BAKE TIMER window displays ‘0’, it is set up for Bakery Mode (factory default). Press the
UP or DOWN arrow buttons to enter FSS mode (display will change to a 3-digit number).
4. Set the desired time between steam cycles using the UP or DOWN arrow buttons. The range is
from 300 seconds (5 min.) to 990 seconds (approximately 17 min.), and increments by 10
seconds at a time.
5. After setting the desired cycle, press the POWER ON OFF button to save the settings.
6. The STEAM TIMER will now operate in 1-second increments, up to 10 seconds, to set the duration
of steaming.
Examples:
‘300’ is selected for P14
‘3’ is entered in STEAM TIMER
= steam is turned on for 3 seconds every 300 seconds (5 min.)
‘990’ is selected for P14
‘3’ is entered in STEAM TIMER
= steam is turned on for 3 seconds every 990 seconds (17 min.)
To return the oven to Bakery Mode, repeat the above process to access P14 and set the value in the
BAKE TIMER window to ‘0’. The STEAM TIMER will now operate in 5-second increments.
KOSHER OPERATION MODE (OVENS EQUIPPED WITH KOSHER PACKAGE)
NOTE: The oven will be put into Kosher operation mode by authorized personnel at the time
of start-up.
For Kosher operations, the oven must maintain a minimum temperature in order to retain Kosher
approval. The oven control will make the minimum set temperature 200°F in order to maintain minimum
temperature requirements. Do not attempt to set the oven temperature below this point.
If the oven temperature is at risk of falling below the approved range, a rapid beep alarm will sound
(faster than the normal BAKE TIMER alarm). If you hear this alarm, do the following:
•
Check that the oven door is closed.
•
If the Vent mode is active, turn the Vent off.
If the oven temperature falls below 150°F, the control will lock out. The display will read ‘LOC OUT’ and
the unit will not operate. Authorized personnel must be contacted to restart the oven.
If the control is inadvertently turned OFF while in kosher mode, when powered ON, the control will restart in kosher mode as long as the temperature has not dropped below the minimum requirements.
– 12 –
PROGRAMMING THE OVEN
Single Step Programming
The program menu stores up to 99 programs that can be recalled by number when needed. A program
is a set of baking instructions (temperature, bake, steam and airflow delay settings) that the operator
defines for any baking operation.
1. With the oven in the OFF mode, press and hold the UP arrow in the STEPS section. While
pressing and holding the UP arrow, press the POWER ON OFF button for 3 seconds. When the
beep sounds, the oven is in program mode.
2. Press the PROGRAM UP or DOWN arrows until the program number that is desired is displayed.
3. Press the TEMP UP or DOWN arrows to enter the desired temperature.
4. Set the Bake, Steam, Delay Airflow and Vent settings:
•
Press the UP or DOWN arrows next to BAKE TIMER to enter the desired time.
•
Press the UP or DOWN arrows next to STEAM TIMER to enter the desired time.
•
Press the UP arrow next to AIRFLOW DELAY to enter the desired time.
NOTE: Steam and airflow delay settings are optional and can be left at 0 if desired.
•
Press the VENT button to vent the cavity for the entire time of the step. When step is
complete, vent will close.
5. To store the program, press the PROGRAM UP or DOWN arrows to move to the next program
number or press the POWER ON OFF button to exit the program mode. To store additional
program settings, repeat steps 2 to 4.
6. Record program numbers, and product associated with them, on the bake card supplied with the
oven.
– 13 –
Multi-Step Programming
Additional programs or steps can be entered within the original program number. Up to four individual
steps can be added by the operator, each with different bake settings.
For example, Program 1 has temperature, bake, steam and delay time settings set by the operator.
This is known as Step 1. After the timer times out in Step 1, the oven automatically starts the
programmed bake settings in Step 2. The system continues with each step until all steps have been
timed out.
1. With the oven in the OFF mode, press and hold the UP arrow in the STEPS section. While
pressing and holding the UP arrow, press the POWER ON OFF button for 3 seconds. When the
beep sounds, the oven is in program mode.
2. Press the PROGRAM UP or DOWN arrows until the program number that is desired is displayed.
The Step 1 light is lit.
3. Press the TEMP UP or DOWN arrows to enter the desired temperature.
4. Set the Bake, Steam, Delay Airflow and Vent settings:
•
•
•
Press the UP or DOWN arrows next to BAKE TIMER to enter the desired time.
Press the UP or DOWN arrows next to STEAM TIMER to enter the desired time.
Press the UP arrow next to AIRFLOW DELAY to enter the desired time.
NOTE: The steam and airflow delay settings are optional and can be left at 0 if desired.
•
Press the VENT button to vent the cavity for the entire time of the step. When step is
complete, vent will close.
5. Press the UP arrow in the STEPS section to advance to the next step within the program. The
selected step light is lit. Repeat steps 3 and 4 above to set each step, if needed, in the program.
6. To store all the steps in the program, press the PROGRAM UP or DOWN arrows to move to the
next program number, or press the POWER ON OFF button to exit the program mode.
– 14 –
Changing the Programs
1. With the oven in the OFF mode, press and hold the UP arrow in the STEPS section. While
pressing and holding the UP arrow, press the POWER ON button for 3 seconds. When the beep
sounds, the oven is in program mode.
2. Press the PROGRAM UP or DOWN arrows until the program number that is desired is displayed.
3. Enter the new Bake, Steam and Delay Airflow settings:
•
Press the UP or DOWN arrows next to BAKE TIMER to enter the desired time.
•
Press the UP or DOWN arrows next to STEAM TIMER to enter the desired time.
•
Press the UP arrow next to AIRFLOW DELAY to enter the desired time.
NOTE: The steam and airflow delay settings are optional and can be left at 0 if desired.
4. To change the settings in a Step, press the UP arrow in the STEPS section and make changes
in each step accordingly.
5. To store the program, press the PROGRAM UP or DOWN arrows to move to the next program
number or press the POWER ON OFF button to exit the program mode.
– 15 –
Using the Programs
1. Press the PROGRAM UP or DOWN arrows to select the desired program number (1-99). The
TEMP, BAKE, STEAM and AIRFLOW DELAY settings are displayed.
2. Confirm that the oven is at the set baking temperature.
3. Slowly open the doors. Wait for the rack lifting device to come to a stop.
4. Roll the rack into the oven so the end brackets channel onto the rack lifting carrier. (See Loading
Procedure.)
5. Close and latch the door.
6. Press START. A beeper will sound after the BAKE TIMER times out. Press STOP to silence the
beeper.
Program Hints
•
The oven defaults to the Program 0 settings when first turned on. Program 0 settings are as
follows: Temp = 375°F, Bake Timer = 0, Steam Timer = 0, Delay Timer = 0, Program = 0.
•
Any combination of bake settings can be manually entered for one-time custom baking
operations. These settings are not saved to the program memory.
•
If any of the baking parameters are changed in a program before or during a bake cycle, the
oven reverts to a manual program (Program 0).
•
The PROGRAM UP and DOWN arrows have no effect while the bake cycle is in progress.
However, if the BAKE TIMER has been stopped, either by pressing the STOP button or by
opening the door, then pressing the PROGRAM UP and DOWN arrows will select a new
program and cancel the baking cycle that was in progress.
•
When selecting programs, the system will skip over unprogrammed numbers. For example, if
Program 1 is displayed in the PROGRAM window and no programs are stored in 2, 3 and 4, then
the system will skip over 2, 3 and 4. Program 5 will be the next program displayed.
– 16 –
CUSTOMIZED OPERATION
The HBA oven standard and advanced controls have the capability of being customized to fit your own
personal needs using the setup mode.
Before entering the setup mode, read all the instructions to make sure you are completely clear on what
to do. If you need assistance, please call your authorized Hobart Bakery Systems service office.
Entering Setup Mode
With the oven in the OFF mode, press and hold the START button. While pressing and holding the
START button, press the POWER ON OFF button for 3 seconds. The oven is now in Setup mode and
P1 is displayed in the SET TEMP window.
Changing Items in Setup Mode
The number in the SET TEMP window is the setup number. The BAKE TIMER window displays the
setup item (the settings that can be changed).
1. To change the setup number, press the SET TEMP UP or DOWN arrows. The setup item will be
displayed in the BAKE TIMER window.
2. To make a change in the setup item being displayed, press the BAKE TIMER UP or DOWN
arrows. To adjust the setting, see Setup Guide. Do not attempt to change item numbers P4, P5
and P8. Consult your authorized Hobart Bakery Systems service office for help with these
features.
3. To exit the setup mode, press the POWER ON OFF button.
– 17 –
Setup Guide
Setup
Number
Setup Item
Display
P1
Maximum Temperature
Setpoint
This is the maximum temperature at which the oven can be
set. Range is 50°F to 525°F (10°C to 274°C).
P2
Preheat Temperature
This is the default temperature setpoint when the oven is
first turned on (Program 0). The preheat temperature cannot
be set higher than the value in P1. Range is 50°F to 525°F
(10°C to 274°C).
P3
Minimum Temperature
Setpoint
This is the minimum temperature at which the oven can be
set. Range is 50°F to 200°F (10°C to 93°C).
P4
Temperature Offset
This value permits an offset of correction between the
temperature probe and the real baking chamber temperature.
Call your authorized Hobart Bakery Systems service agency
for help with this feature.
P5
Heat OFF Offset
This value adjusts the temperature difference between the
set point and stopping of the heating system. Call your
authorized Hobart Bakery Systems service agency for help
with this feature.
P6
Heat Difference Hysteresis
This value adjusts the temperature difference between the on
temperature and off temperature of the heating system. Call
your authorized Hobart Bakery Systems service agency for
help with this feature.
P7
Maximum Steam Time
Time set is the maximum time (in seconds) that water is
supplied during the STEAM TIMER operation.
P8
Temperature Units
The oven can be set to display temperature in Fahrenheit or
Celsius. To ensure accurate temperature parameters, call
your authorized Hobart Bakery Systems service agency for
help with this feature.
P9
Bake Timer Mode
The BAKE TIMER can be set up to display minutes set/
minutes remaining or hours and minutes. Select 0 for minutes
set/minutes remaining or 1 for hours and minutes. (If this
parameter is changed to hours and minutes, a label has been
provided to place on the control panel to indicate the change.)
P10
Vent Evacuate Time
Time set is the time (in seconds) that the vent is 100% open
at the beginning of the venting cycle. Range is 0 to 180
seconds.
P11
Vent Open Percentage
This value is the percentage the bake chamber vent is open
after the vent evacuate time has expired. Range is 5 to 100%.
P12
End of Bake Automatic
Vent - Enable
This feature enables the Automatic Vent Cycle. Select 0 to
disable or 1 to enable this feature (see P13 for entering time).
P13
End of Bake Automaitc
Vent Time
This is the number of minutes before the end of the bake
cycle that the vent is open.
– 18 –
Setup Guide (cont)
Setup
Number
Setup Item
Display
P14
Steam Timer Mode
The STEAM TIMER can be set up to display in seconds or
operate in food service mode. Select 0 for seconds or
300 to 990 for food service mode.
P15
Interior Light Brightness
This value is the brightness of the interior lights. The higher
the number, the brighter the lights. Range is 50 to 100.
P16
Clock Operation
This selects either 12 hours (AM/PM) or 24 hours real time
display. Press the Bake Time Up button to switch between
the two types of display.
P17
Temperature Setback Time
This selects the elapsed time from the last timed bake to
when the oven will lower the oven set temperature to the
value set in P18. Range is 10 to 180 minutes.
P18
Setback Temperature
This selects the oven set temperature that the oven will
change to when the temperature setback time has been
exceeded in P17. Range is 50°F to 300°F (10°C to
149°C).
P19
Lights Mode
Select 1 for lights on continuously (when oven is on) or
select 0 for automatic operation. Lights will turn off
automatically after 30 minutes of no user activity (door
opened or closed, no buttons pushed).
SHUTDOWN
NOTE: Before restarting a gas oven, power switch and gas burner valve must be off for a minimum
of 5 minutes.
1. Remove all remaining product.
NOTE: Vent can be used to cool the oven.
2. Press the POWER ON OFF button.
3. Clean the baking chamber. (See Cleaning.)
4. For lengthy shutdowns, disconnect the main power and shut off the gas and water supply.
RESTARTING OVEN
NOTE: Before restarting a gas oven, power switch and gas burner valve must be off for a minimum
of 5 minutes.
1. Press the POWER ON OFF button to turn the oven on.
2. Press the UP or DOWN arrows next to the SET TEMP window to enter the desired temperature.
– 19 –
CLEANING
WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW
LOCKOUT / TAGOUT PROCEDURES. THERE MAY BE MULTIPLE CIRCUITS. BE SURE ALL
CIRCUITS ARE DISCONNECTED.
WARNING: THE RACK OVEN AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING,
SERVICING OR CLEANING THE RACK OVEN.
WARNING: HOT AIR AND STEAM ARE RELEASED FROM THE OVEN INTERIOR WHEN THE
LOADING DOOR IS OPENED. TO AVOID BURNS, OPEN THE DOOR SLOWLY AND KEEP CLEAR
OF THE OPENING.
•
Allow the oven to cool.
•
Clean the outside of the oven daily with a clean, damp cloth.
•
Remove rack(s) and clean as you would any cooking utensil. Use warm, soapy water and a
brush. Rinse with clear water and dry with a clean cloth.
•
Use care when cleaning around sensitive interior parts such as probes, sensors or the rotating
mechanism.
•
Using a clean cloth and warm, soapy water, wash the stainless steel interior of the oven. Rinse
with clear water and dry with a clean cloth.
•
Gently scrape heavy buildup off door glass. Residue can be removed with a glass cleaner when
oven is cool.
•
Clean hood filters (if equipped) with soap and warm water.
•
Do not use oven cleaners or steel wool on stainless steel surfaces. Never spray down the oven
with water or steam.
•
Never use cleaners that contain chlorine. Chlorine corrodes stainless steel.
– 20 –
MAINTENANCE
WARNING: THE RACK OVEN AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING,
SERVICING OR CLEANING THE OVEN.
WARNING: HOT AIR AND STEAM ARE RELEASED FROM THE OVEN INTERIOR WHEN THE
LOADING DOOR IS OPENED. TO AVOID BURNS, OPEN THE DOOR SLOWLY AND KEEP CLEAR
OF THE OPENING.
WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW
LOCKOUT / TAGOUT PROCEDURES. THERE MAY BE MULTIPLE CIRCUITS. BE SURE ALL
CIRCUITS ARE DISCONNECTED.
On gas ovens, annually check the flue to be sure it is free of obstructions.
GENERAL
As Needed
•
Inspect the area around the oven. The area must be free and clear from combustibles. There
must be no obstructions to the air flow.
Daily
•
Clean Exterior (See Cleaning).
Weekly
•
Clean the oven interior and remove loose debris (See Cleaning).
•
Clean the windows.
•
Empty grease catcher (if equipped).
Monthly
•
Clean exhaust hood filters (if equipped) with soap and water.
Bi-Monthly
•
Owner Preventive Maintenance Procedure.
PREVENTIVE MAINTENANCE
The HBA Rack Oven should be kept on a regular preventive maintenance schedule. Ovens require
specific preventive maintenance based on usage and environmental factors. The failure to have the
oven properly maintained by following recommended preventive maintenance procedures may result
in higher repair costs, shortened equipment life, or unsafe operating conditions.
The performance of routine preventive maintenance on any rack oven, which is the owner’s
responsibility, will help to ensure continued safe and reliable operation.
A preventive maintenance program is your best option for continued safe and reliable oven operation.
We believe that Hobart Service is your best choice for performing preventive maintenance.
SERVICE AND PARTS INFORMATION
Contact your authorized Hobart Bakery Systems service office.
– 21 –
TROUBLESHOOTING
BURNERS WILL NOT LIGHT ON GAS OVEN
1. Check that door is shut.
2. Press the OFF button to turn the oven off and wait 5 minutes.
3. Make sure the gas shutoff valve is in the ON position.
4. Press the ON button to turn the oven back on.
If the above suggestions do not remedy the problem, contact a Hobart Bakery Systems service office.
ALARMS AND DISPLAY MESSAGES
Alarm or Message
Cause
Action
Temperature display changes
between a number and ‘COOL’.
Cool Down mode is active.
To return to normal mode, close oven
door.
Display is flashing with no
beeping, while oven is in a timed
bake cycle and is calling for heat.
Temperature recovery alert.
Open oven door and close to reset heat
control. If unit does not begin heating
contact your local Hobart Service office.
Display shows ‘SHdn’.
Safety Alarm has disabled
oven.
TURN OFF ALL POWER AND GAS TO
THE OVEN. Do not use oven. Contact
your local Hobart Service office.
Control beeps continuously.
Rack Rotation alert.
Check that rack is rotating; check for
pans that may be protruding from rack. If
problem persists contact your local
Hobart Service office.
Controls beeps rapidly (faster
beep than Baker Timer).
Temperature alert for
Kosher Mode.
Turn VENT off, if activated. Gas ovens:
check that burner is firing. If not firing,
briefly open door and close to reset
temperature control.
Display shows ‘LOC OUT’.
Oven in Kosher Lock-Out
Mode.
Contact your local Hobart Service office.
OTHER TROUBLESHOOTING TOPICS
Condition
Cause
Action
Oven circulation fan is running
but oven is turned off.
Oven is in Cooling mode.
Close oven door to cancel cooling
mode. If door was not open, contact
your local Hobart Service office.
STEAM TIME cannot be set
above 10 seconds, and time
increments by 1-second.
Oven is in Food Service
mode.
See Food Service Mode instructions to
return oven to Bakery mode.
Rack does not lift and rotate.
Bake time has not been
entered in timer and/or
timer has not been
started.
Enter time in BAKE TIMER and press
START. If problem persists, contact
your local Hobart Service office.
– 22 –
OWNER PREVENTIVE MAINTENANCE PROCEDURE
INTRODUCTION
This customer preventive maintenance (PM) section includes procedures to inspect for proper
operation and cleaning of components. Owner Preventive Maintenance Procedures are written for gas
ovens. They can also be used for electric ovens by omitting the steps that refer to components found
only on gas ovens. Customer PMs should be conducted bi-monthly per OSHA Bakery Oven Inspection
Standard 29 CFR 1910.263(l)(9)(ii). A convenient PM Checklist is provided at the end of this section.
NOTE: This PM procedure does not discuss repair or replacement of components. Upon completion
of the PM procedure you will need to contact a qualified servicer for any needed repairs.
Tools Used For Inspection Procedure
• Standard set of hand tools
• Vacuum cleaner - shop vac
PREVENTIVE MAINTENANCE PROCEDURE
WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW
LOCKOUT / TAGOUT PROCEDURES. THERE MAY BE MULTIPLE CIRCUITS. BE SURE ALL
CIRCUITS ARE DISCONNECTED.
WARNING: SHUT OFF THE GAS BEFORE SERVICING THE UNIT.
WARNING: CERTAIN PROCEDURES IN THIS SECTION REQUIRE ELECTRICAL TEST OR
MEASUREMENTS WHILE POWER IS APPLIED TO THE MACHINE. EXERCISE EXTREME CAUTION
AT ALL TIMES. IF TEST POINTS ARE NOT EASILY ACCESSIBLE, DISCONNECT POWER AND
FOLLOW LOCKOUT / TAGOUT PROCEDURES, ATTACH TEST EQUIPMENT AND REAPPLY
POWER TO TEST.
Inspect Oven Lamps
1. Lamps should be on when oven is powered.
2. If not, replace lamps (Fig. 1).
A. Remove lens cover by turning out of lamp housing.
B. Remove oven lamp by turning lamp out of lamp
socket.
3. Reverse the procedure to install new lamps.
Fig. 1
– 23 –
Clean and Vacuum Components and Control/Burner Compartment Area (Gas Only)
1. Clean the control/burner compartment (Fig. 2) area of dust and/or lint accumulation.
2. Vacuum the control/burner compartment floor of dust and/or lint accumulation.
3. Gain access to the top of oven and clean dust that may have accumulated on top of circulation
blower motor (Fig. 3) and motor cooling fan.
Fig. 3
Fig. 2
Rack Lift and Rotation Assemblies
1. Check rack lift assembly for proper operation.
A. Open door. Rack lift should lower to correct height of rack and be in forward loading position
to accept rack entry.
B. The oven rack should be easily rolled in and out of oven and the wheels completely off the
oven floor when raised.
2. Tighten all set screws (4) in carrier (Fig. 4).
A. Check and tighten all set screws on carrier.
Fig. 4
– 24 –
Inspect Door Components
1. Check loading door latch.
A. Check door gasket for good condition. If door gasket needs replacement, contact your local
Hobart office for service.
B. Check loading door latch. Latch must fully extend (Fig. 5) when door is closed and
contacting door gasket. Leave about 1/8" gap for heat expansion.
C. Adjust strike in or out as required by loosening one screw (Fig. 6) on each side of strike.
D. Tighten screws.
Fig. 6
Fig. 5
2. Check door sweep.
A. The door sweep should hit the floor
approximately 1/8" evenly across door
width, when door is in the closed position.
B. Turn oven on.
C. If air (or steam) blows out from underneath
the door, door will need to be adjusted. If
door sweep needs replacement or
adjustment, contact your local Hobart
office for service.
3. Check interior door release (Fig. 7) for proper
operation.
Fig. 7
4. Check door switch for proper operation.
A. When door switch actuator rod is in the
down position (door open), the rod should
extend 3/8" to 7/16" from the underside of
the header and easily slide up ramp as
door is closed (Fig. 8). Slide ramp should
be positioned as shown. If not,
re-form ramp as necessary.
Fig. 8
– 25 –
Inspect Air Louvers
1. Check air louvers (shutters) (Fig. 9) inside oven and tighten any loose screws.
2. Check oven interior, tighten or replace loose or missing panel screws. Also check floor anchors.
Inspect Cavity Vent
1. Check cavity vent for proper operation.
A. Push VENT (Fig. 10) button on control panel to open vent and then push again to close
vent.
B. Visually check that vent opens (Fig. 11) and closes (Fig. 12) when button is pressed.
Fig. 10
Fig. 9
Fig. 12
Fig. 11
Visually Inspect Electrical Connections
1. Inspect all wiring connections for discoloration. If discoloration is visible, contact your local Hobart
Bakery Systems service.
– 26 –
Verify Ignition Module Safety Lockout Functions (Gas Only)
1. Verify ignition module safety lockout functions.
A. Turn off main gas supply to the oven.
B. Open control panel door to gain access to burner
compartment area.
C. Turn the oven on.
D. Set the oven to call for heat and make sure
convection fan is running.
E. Observe LED light through hole in control box
cover (Fig.13). After trying to light the burner
three times, the module should lockout. (See
chart below.)
F. Turn main gas supply to the oven back on.
G. Set the oven to call for heat, making sure
convection fan is running and the burner has
established a flame.
H. Turn off main gas supply to the oven.
Fig. 13
I. Observe LED light through hole in control box
cover (Fig.13). The ignition module should go
into lockout. (See chart below.)
LED DIAGNOSTIC INDICATOR CODES
LED
LED
LED off
No Fault
LED illuminated
Module Fault
'1' Flash
Air Flow Fault
'2' Flash
Flame Fault No Call for Heat
'3' Flash
Ignition Module Lockout
J. If the results have been obtained, proceed to
step 2.
K. If the results have not been obtained, contact your
local Hobart Systems Service office.
2. Verify hood exhaust air pressure switch (Fig. 14)
operation.
A. Set oven control to call for heat and make sure
convection fan is running.
B. Disconnect tubing from exhaust vent collar. Burner
flame should go out.
C. Reconnect tubing. Burner should establish a flame.
If not, contact your local Hobart Bakery Systems
service office.
– 27 –
Fig. 14
3. Verify draft inducer pressure switch (Fig. 15) operation.
A. Set oven control to call for heat and make sure convection fan is running.
B. Disconnect tubing from draft inducer pressure switch (Fig. 15). Burner flame should go
out.
C. Reconnect tubing. Burner should establish a flame. If not, contact your local Hobart
Bakery Systems service office.
Fig. 15
Verify Operation of Steam
1. Check steam system for proper operation.
A. Turn the water supply on.
B. Turn oven on and set to normal bake temperature.
C. Allow to cycle three times to stabilize temperature.
D. Set control to call for steam.
E. Observe operation. If steam is not observed, contact your local Hobart Bakery Systems
service office.
After completion of the owner PM procedure, you will need to contact a qualified servicer for
any needed repairs.
Keep a copy of the Owner Preventive Maintenance Checklist for your records.
– 28 –
MODEL/SERIAL NUMBERS
COPY AS NEEDED
RECOMMENDED OWNER
PREVENTIVE MAINTENANCE CHECKLIST
BAKERY RACK OVENS - GAS
CHECK FOR PROPER OPERATION OR CLEAN.
CALL FOR SERVICE AS NECESSARY
Inspect oven lamps
Clean and vacuum components and burner areas
Inspect rack lift and rotation assemblies
Inspect door components
Inspect air louvers
Inspect cavity vent
Visually inspect electrical connections
Verify ignition module safety lockout functions
Verify operation of steam
√ = PROCESS COMPLETED
PM Frequency:
Type of Gas
Location:
Bi-monthly
Natural Gas _____________
Propane_____________
________________________________
Inspector: ________________________________
Store No.
_____________________________
Date Completed: _____________________________
Service Notified for Necessary Repairs: _____________________
(Date)
Comments:
(Inspector Signature)
– 29 –
NOTES
– 30 –
NOTES
– 31 –
NOTES
FORM 36801 (May 2005)
– 32 –
PRINTED IN U.S.A.
SCHEMATIC, W/ BACK-UP CONTROL
OVEN CONDITION FOR SCHEMATIC AS SHOWN:
OVEN ON, DOOR OPEN,LIFT IN LOADING POSITION,
CAVITY VENT CLOSED
INPUT
208-240V/50-60/1ph
LINE INPUT
N
AC1
L1
L2
32
OL1
32
N
B
CONNECTOR LEGEND:
<< xx-yyzz (eg. 14-1BU)
xx = # of pins this connector
yy = Pin # position
zz = connector name
(3-PHASE
INPUT ONLY)
MR1
A
C
CIRCULATION
BLOWER MOTOR
M1
50
TO OPT.
ALARM
32
32
(1.5 HP, 3ph OR 2 HP, 1ph)
32
104-120V
AC1
60
AC11
GAS OVENS ONLY
AC11
HI LIMIT
HOOD PRESSURE
28
33
33
4-
30
33
32
33
4-
32
32
HOOD
VENT
120V
INPUT
7
7
32
HOOD VENT/ IGN CONTROL RESET RELAY
CR1
13
HEAT 13
OUTPUT
15-1BU
HEAT 14
INPUT
40
14
THST
40
15-2BU
41
NORMAL
24
15-3BU
19
15-11BU
19
15-4BU
33
BACKUP CONTROL
CIRCUIT
OPTIONAL
NORMAL
15-12BU
57
42
33
PRINTED
CIRCUIT
BOARD
15-7BU
8
15-8BU
WATER
SOLENOID
LIGHTS
RED
9
VENT
POSITION
INPUT
NORMAL
10
NORMAL
42
42
15-6BU
32
CR2
32
15-5B
11
FANS
28
WATER
BACKUP
29
15-9BU
10
3-1BU
11
29
9
3-3BU
58
10
BACKUP/NORM
15-
INTERIOR
LIGHTS
OL1
CIRCULATION
BLOWER MOTOR
CONTACTOR
MR1
SV1
32
WATER
15-15BU
27
39
NO
VENT
POSITION
M2
VENT
MOTOR
3
6-3LIFT
6-1LIFT
11
3
4
5
DOOR INPUT
39
NC
WHITE
SENSOR
5
9
33
TEMP
8
5
OVEN CAVITY
VENT
BACKUP/NORM
42
BACKUP
CIRCULATION
BLOWER
OL2
26
15-10BU
120V
INPUT
57
BACKUP
33
PCB GND
4-
24
BACKUP
BACK-UP
LIFTER/
ROTATOR
4-
TO HEATER CIRCUIT
AC11
GND
L3
50
10A
CB
STD.
UNITS
HOOD VENT
OUTPUT (SEE DATA PLATE)
32
AC1 AC1
AC2
AC
NOISE
FILTER
NEUT
LINE INPUT
NEUT
AC2
INPUT
208-240V/50-60/1 or 3 ph
380V/50-60/3 ph
440V-480V/50-60/3 ph
INPUT
120V/50-60/1ph
26
NO
36
NC
6-5LIFT
32
CR3
RACK POS
RELAY
RACK POS
SW #1
5
33
RACK
POSITION 52
INPUT
6-2LIFT
4
6-4LIFT
52
NO
33
53
NC
RACK POS SW #2
33
40
BP1
NC
3-3LIFT
3-1LIFT
OVERLAY/
MEMBRANE
SWITCH
13
NC
NO
DOOR SW #1
26
NO
NC
NO
UP
LS1 NO
5
4
25
12
6
M4
LS2
32
20
12
NC
NC
ROTATOR
MOTOR
UP
M5
23
37
32
LIFT
MOTOR
DN
DOOR SW #2
X
NO
DN
DERIVED FROM 01-10I505 REV L
LIFTER/
ROTATOR CONTROL
CIRCUIT
(LOCATED ON TOP
OF OVEN)
CAPACITOR IS INTERNAL
TO THE LIFT MOTOR
AI 2237
SCHEMATIC, W/O BACK-UP CONTROL
OVEN CONDITION FOR SCHEMATIC AS SHOWN:
OVEN ON, DOOR OPEN,LIFT IN LOADING POSITION,
CAVITY VENT CLOSED
INPUT
208-240V/50-60/1ph
LINE INPUT
INPUT
120V/50-60/1ph
AC2
N
AC1
L1
L2
GND
B
CONNECTOR LEGEND:
<< xx-yyzz (eg. 14-1BU)
xx = # of pins this connector
yy = Pin # position
zz = connector name
(3-PHASE
INPUT ONLY)
MR1
C
CIRCULATION
BLOWER MOTOR
M1
50
TO OPT.
ALARM
AC1
32
32
(1.5 HP, 3ph OR 2 HP, 1ph)
32
104-120V
32
OL1
32
N
A
60
AC11
GAS OVENS ONLY
AC11
HI LIMIT
HOOD PRESSURE
28
33
33
4-
30
33
32
33
4-
32
32
HOOD
VENT
120V
INPUT
7
7
32
HOOD VENT/ IGN CONTROL RESET RELAY
CR1
13
HEAT 13
OUTPUT
15-1BU
HEAT 14
INPUT
15-3BU
40
4-
24
15-2BU
4-
TO HEATER CIRCUIT
AC11
L3
50
10A
CB
STD.
UNITS
HOOD VENT
OUTPUT (SEE DATA PLATE)
32
AC1 AC1
AC2
AC
NOISE
FILTER
NEUT
LINE INPUT
NEUT
INPUT
208-240V/50-60/1 or 3 ph
380V/50-60/3 ph
440V-480V/50-60/3 ph
OPTIONAL
LIFTER/
ROTATOR
15-11BU
19
57
15-12BU
OL2
15-4BU
26
33
PCB GND
15-10BU
120V
INPUT
CIRCULATION
BLOWER
PRINTED
CIRCUIT
BOARD
42
15-7BU
8
VENT
POSITION
INPUT
9
39
NC
58
10
15-
CIRCULATION
BLOWER MOTOR
CONTACTOR
MR1
SV1
32
10
3-3BU
WATER
27
M2
NO
VENT
POSITION
VENT
MOTOR
3
6-3LIFT
6-1LIFT
11
3
4
5
26
NO
36
NC
6-5LIFT
32
CR3
RACK POS
RELAY
RACK POS
SW #1
5
33
RACK
POSITION 52
INPUT
4
6-4LIFT
52
NO
33
53
RACK POS SW #2
33
40
OVERLAY/
MEMBRANE
SWITCH
NC
3-3LIFT
3-1LIFT
13
NC
NO
DOOR SW #1
26
NO
NC
NO
UP
LS1 NO
5
25
12
6
M4
LS2
32
20
12
4
NC
NC
ROTATOR
MOTOR
UP
M5
23
37
32
LIFT
MOTOR
DN
DOOR SW #2
X
NO
DN
DERIIVED FROM 01-10I506 REV l
LIFTER/
ROTATOR CONTROL
CIRCUIT
(LOCATED ON TOP
OF OVEN)
6-2LIFT
NC
BP1
OL1
15-15BU
WHITE
DOOR INPUT
INTERIOR
LIGHTS
3-1BU
9
OVEN CAVITY
VENT
LIGHTS
SENSOR
11
29
15-9BU
15-8BU
33
RED
32
15-5B
5
WATER
SOLENOID
TEMP
15-6BU
BACKUP CONTROL
JUMPERS
CAPACITOR IS INTERNAL
TO THE LIFT MOTOR
AI 2238
HEAT CIRCUIT - BURNER
AI 2240
CONTROL
INPUT/OUTPUT
STATUS LIGHTS
A5
A9
INTERIOR
LIGHTS OUTPUT
A6
A10
WATER VALVE
OUTPUT
LIFT
OUTPUT
A7
A11
A8
A5
A1
A9
A6
A2
A10
A7
A3
A11
A8
A4
HOOD RELAY
OUTPUT
CIRC FAN
OUTPUT
VENT MOTOR
OUTPUT
BURNER
OUTPUT
A1
A2
MAIN POWER
INPUT
DOOR INPUT
A3
VENT SWITCH
INPUT
A4
BURNER POWER
INPUT
DERIVED FROM 01-100V16-0584A
AI 2239
CATALOG OF
REPLACEMENT
PARTS
HBA SERIES
GAS RACK OVEN
HBA1G
HBA2G
ML-132358
ML-132280
A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001
FORM 43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
F-43070 Rev. C (June 2008)
-2-
© HOBART
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
Table of Contents
5
7
9
11
13
15
17
18
19
21
23
25
27
29
31
33
34
35
37
38
40
41
43
45
47
49
51
COMPONENT BOX (ML-132358)
COMPONENT BOX (ML-132280)
(PREVIOUS CONSTRUCTION BEFORE 8/1/05)
COMPONENT BOX (ML-132280)
(CURRENT CONSTRUCTION ON OR AFTER 8/1/05)
CABINET (ML-132358)
(PREVIOUS CONSTRUCTION BEFORE 8/1/05)
CABINET (ML-132358)
(CURRENT CONSTRUCTION ON OR AFTER 8/1/05)
CABINET (ML-132280)
(PREVIOUS CONSTRUCTION BEFORE 8/1/05)
CABINET (ML-132280)
(CURRENT CONSTRUCTION ON OR AFTER 8/1/05)
HOOD (ML-132358)
HOOD (ML-132280)
LOADING DOOR (ML-132358)
LOADING DOOR (ML-132280)
DOOR ASSEMBLY (PUSH LOCK TYPE)
CONTROL CABINET, DOOR, AND CONTROLLER
(ML-132358)
CONTROL CABINET, DOOR, AND CONTROLLER
(ML-132280)
BLOWER, PANELS, AND VENTS (ML-132358)
BLOWER, PANELS, AND VENTS (ML-132280)
DRAFT INDUCER (ML-132358)
(PREVIOUS CONSTRUCTION BEFORE 7/26/05)
DRAFT INDUCER (ML-132280)
(PREVIOUS CONSTRUCTION BEFORE 8/1/05)
DRAFT INDUCER (CURRENT CONSTRUCTION)
(ML-132358 ON OR AFTER 7/26/05 & ML-132280 ON OR
AFTER 8/1/05)
LIFTER AND ROTATOR
STEAMER ASSEMBLY (ML-132358)
STEAMER ASSEMBLY (ML-132280)
GAS BURNER AND HEAT CIRCULATION (ML-132358)
GAS BURNER AND HEAT CIRCULATION (ML-132280)
EXTERIOR WATER SUPPLY
GAS SUPPLY PLUMBING
VENTING
-3-
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
1
3
2
4
5
6
7-8
9-10-11
12
13
14
15
18-19
17
PL-57809
16
COMPONENT BOX (ML-132358)
F-43070 Rev. C (June 2008)
-4-
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
COMPONENT BOX (ML-132358)
ILLUS.
PL-57809
1
2
3
4
*5
6
7
8
9
10
11
12
13
14
15
16
17
18
**19
PART NO.
01-1M5439-00001
01-1M5440-00001
01-1M2824-00001
01-1000V9-00170
01-100V10-00251
01-1000V6-00070
01-1000V6-00231
01-1000V6-00233
01-1000V6-00232
01-1000V6-00234
01-1000V6-00235
01-1M5493-00001
01-1000V6-00220
01-1000V6-00221
01-1000V6-00070
01-100V18-00149
01-1M5084-00001
01-1M5083-00001
01-1000V6-00265
NAME OF PART
AMT.
Box – Component Panel ............................................................................................................ 1
Cover – Component Panel ........................................................................................................ 1
Switch – Pressure ...................................................................................................................... 1
Control – Ignition (3 TFI, No Reset) ........................................................................................... 1
Transformer (120-24 V.) (With Reset) (Current Construction) ................................................... 1
Relay – DPDT (1/4 Hp., 120 VAC) (Fan) .................................................................................... 1
Contactor – Blower Circulation (208-240 V., 3 Ph.) ................................................................... 1
Contactor – Blower Circulation (208-240 V., 1 Ph.) ................................................................... 1
Overload – Blower Circulation (208-240 V., 4-6 Amp., 3 Ph.) .................................................... 1
Overload – Blower Circulation (208-240 V., 7-10 Amp., 1 Ph.) .................................................. 1
Overload – Blower Circulation (480 V., 1.2-2.5 Amp., 3 Ph.) ..................................................... 1
Box – Back-up Controls ............................................................................................................. 1
Switch – Toggle 4 PDT (Back-Up Controls) ............................................................................... 1
Switch – MOM Transfer (Back-Up Controls) .............................................................................. 1
Relay – DPDT (1/4 Hp., 120 VAC) (Back-Up Controls) ............................................................... 1
Knob – Thermostat (Back-Up Controls) ..................................................................................... 1
Plate – Backup Control ID (Back-Up Controls) .......................................................................... 1
Backup Control Unit (Incls. Items 13 thru 17) ............................................................................ 1
Thermostat – 500 Deg. .............................................................................................................. 1
*On previous construction machines, use Fuse 250 V., 3.0 Amp. purchased locally.
**Machines built before 8/25/06 must order item 18 for replacement.
-5-
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
1-2
23
3-4
5
6-7-8
9
10-11
12
17
13
18
14
15
16
21-22
19
20
PL-57961
COMPONENT BOX (ML-132280)
(PREVIOUS CONSTRUCTION BEFORE 8/1/05)
F-43070 Rev. C (June 2008)
-6-
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
COMPONENT BOX (ML-132280)
(PREVIOUS CONSTRUCTION BEFORE 8/1/05)
ILLUS.
PL-57961
1
2
3
4
5
6
7
8
9
10
11
12
*13
14
**15
16
17
18
19
20
21
22
23
PART NO.
01-1000V5-00105
01-1000V5-00106
01-1000V6-00231
01-1000V6-00233
01-1000V6-00271
01-1000V6-00232
01-1000V6-00234
01-1000V6-00235
01-1000V6-00118
01-1000V6-00189
01-1000V6-00188
01-1000V9-00170
01-100V10-00251
01-100V18-00149
01-1000V6-00265
01-1M5083-00001
01-1000V6-00221
01-1000V6-00220
01-1000V6-00271
01-1M5084-00001
01-1M5090-00001
01-1M5090-00002
01-1M2824-00001
01-1000V5-00014
01-100V17-00259
NAME OF PART
AMT.
Terminal – Section (600 V.) (Flat Base) ..................................................................................... 7
End – Section (600 V.) (Flat Base) ............................................................................................ 3
Contactor – Blower Circulation (3 Ph.) ...................................................................................... 1
Contactor – Blower Circulation (1 Ph.) ...................................................................................... 1
Relay – DPDT (1/2 Hp., 120 VAC) (Fan) ..................................................................................... 1
Overload – Blower Circulation (208-240 V., 4-6 Amp., 3 Ph.) .................................................... 1
Overload – Blower Circulation (208-240 V., 7-10 Amp., 1 Ph.) .................................................. 1
Overload – Blower Circulation (480 V., 1.2-2.5 Amp., 3 Ph.) ..................................................... 1
Thermostat – Hi Limit (550 Deg.)............................................................................................... 1
Overload (0.8-1.2 Amp.) (Lift & Rotate) ..................................................................................... 1
Base – Relay Overload .............................................................................................................. 1
Control – Ignition (3 TFI, No Reset) ........................................................................................... 1
Transformer (120-24 V.) (With Reset) ........................................................................................ 1
Knob – Thermostat (Back-Up Controls) ..................................................................................... 1
Thermostat – 500 Deg. .............................................................................................................. 1
Backup Control Unit (Incls. Items 13, 14, 15, 17, 18, & 19) ....................................................... 1
Switch – MOM Transfer (Back-Up Controls) .............................................................................. 1
Switch – Toggle 4 DPT (Back-Up Controls) ............................................................................... 1
Relay – DPDT (1/2 Hp., 120 VAC) (Back-Up Controls) ............................................................... 1
Plate – Backup Control ID (Back-Up Controls) .......................................................................... 1
Cover – Component Box W/O Back-Up Unit (24 In.)................................................................. 1
Cover – Component Box W/Back-Up Unit (19.5 In.) (Shown) ................................................... 1
Switch – Pressure ...................................................................................................................... 1
Tie – Cable................................................................................................................................. 4
Plug – Pipe 3/8 In. NPT, PLTD (W/O Back-Up Unit).................................................................... 1
*On previous construction machines, use Fuse 250 V., 3.0 Amp. purchased locally.
**Machines built before 8/25/06 must order item 16 for replacement.
-7-
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
1
2-3-4
18
17
5
6-7
8
9-10-11
12
16
15
13
14
PL-57855
COMPONENT BOX (ML-132280)
(CURRENT CONSTRUCTION ON OR AFTER 8/1/05)
F-43070 Rev. C (June 2008)
-8-
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
COMPONENT BOX (ML-132280)
(CURRENT CONSTRUCTION ON OR AFTER 8/1/05)
ILLUS.
PL-57855
1
2
3
4
5
6
7
8
*9
10
11
12
13
14
15
16
17
18
PART NO.
01-1000V6-00118
01-1M5525-00002
01-1M5525-00001
01-1M5525-00106
01-1000V5-00101
01-1000V5-00105
01-1000V5-00106
01-100V10-00242
01-100V18-00115
01-1M5946-00001
01-1000V5-00252
01-1000V6-00271
01-1000V9-00170
01-100V10-00251
01-1000V6-00232
01-1000V6-00231
01-1M2824-00001
01-1M5677-00001
01-1M5677-00002
01-1M5083-00001
NAME OF PART
AMT.
Thermostat – Hi Limit (550 Deg.)............................................................................................... 1
Box – Junction (Incls. Items 1 & 4) (Machines Built Before 1/01/06) ......................................... 1
Box – Junction (Incls. Items 1 & 4) (Machines Built On or After 1/01/06) .................................. 1
Cover – Junction Box................................................................................................................. 1
Lug – Grounding ........................................................................................................................ 1
Terminal – Section (600 V.) (Flat Base) ..................................................................................... 7
End – Section (600 V.) (Flat Base) ............................................................................................ 2
Filter – EMI ................................................................................................................................ 1
Rail – Din .................................................................................................................................3 In.
Kit – Circuit Breaker Replacement............................................................................................. 2
Stop – Din Rail End ................................................................................................................... 2
Relay – D.P.D.T. (1/2 Hp., 120 VAC) (CIT) .................................................................................. 1
Control – Ignition (3 TFI, No Reset) ........................................................................................... 1
Transformer (120-24 V.) (With Reset) ........................................................................................ 1
Overload – Blower Circulation (208-240 V., 4-6 Amp., 3 Ph.) .................................................... 1
Contactor – Blower Circulation (3 Ph.) ...................................................................................... 1
Switch – Pressure ...................................................................................................................... 1
Cover – Electric Module (Without Back-Up Controls) ................................................................ 1
Cover – Component Box (Back-Up Controls) ............................................................................ 1
Backup Control Unit ................................................................................................................... 1
*Sold Per Inch
-9-
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
2
1
3
4
15
14
13
12
20
11
18-19
5
9-10
16
6
8
17
29
7
21
22
23
24
25
28
27
26
CABINET (ML-132358)
(PREVIOUS CONSTRUCTION BEFORE 8/1/05)
F-43070 Rev. C (June 2008)
- 10 -
PL-57919
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
CABINET (ML-132358)
(PREVIOUS CONSTRUCTION BEFORE 8/1/05)
ILLUS.
PL-57919
1
2
3
4
5
6
7
8
****9
****10
11
12
13
14
**15
***16
17
18
19
20
21
22
23
24
25
26
27
28
29
*
PART NO.
01-1M2120-00010
01-1M2120-00009
01-1M2120-00010
01-1M2120-00009
01-1M2120-00010
01-1M2120-00009
01-100V17-00301
01-1M1711-0003C
01-1M5918-00001
01-1M5918-00002
01-1000V0-00031
01-1000V0-00038
01-100V17-00259
01-100V17-00266
01-100V21-00056
01-1000V7-00027
01-1M2335-00001
01-1M5289-00003
01-1M5289-00001
01-100V18-0120A
01-1M2072-00004
01-1M2071-00002
01-1M2072-00001
01-1M2071-00001
01-1M2072-00002
01-1M2086-00001
01-1000V4-00073
01-1000V4-0073A
01-1M5430-00001
01-100V21-00073
01-1000V4-00074
01-1M2346-00001
NAME OF PART
AMT.
Skin – Outer ............................................................................................................................... 1
Skin – Outer ............................................................................................................................... 1
Skin – Outer ............................................................................................................................... 1
Skin – Outer ............................................................................................................................... 1
Skin – Outer ............................................................................................................................... 1
Skin – Outer ............................................................................................................................... 1
Ell – 2.5 x 45 Deg. Blk. .............................................................................................................. 1
Plate – Cover Latch ................................................................................................................... 1
Hinge – Door (Female) (Machines Built On or After 2/01/07) .................................................... 2
Hinge Assy. – Door (Machines Built On or After 2/01/07) .......................................................... 2
Bearing – (Nylon) (W/Shoulder)................................................................................................. 4
Bearing – Journal (Nylon) .......................................................................................................... 4
Plug – Pipe 3/8 NPT (Brass) ....................................................................................................... 1
Bushing 3/8 NPT x 3/4 NPT (Brass).............................................................................................. 1
Tape – Fiberglass .....................................................................................................................AR
Lamp – Oven (Complete) (Lens and Base) ............................................................................... 5
Wheel (For Installation).............................................................................................................. 1
Gasket – Loading Door (Top)..................................................................................................... 1
Gasket – Loading Door (Side) ................................................................................................... 2
Strike – Chrome Plated.............................................................................................................. 1
Trim – Floor (38 In.) ................................................................................................................... 1
Joint – Corner Floor Trim ..........................................................................................................AR
Trim – Floor (31 In.) ................................................................................................................... 1
Joint – Corner Floor Trim ..........................................................................................................AR
Trim – Floor (36 In.) ................................................................................................................... 1
Floor ........................................................................................................................................... 1
Anchor – Drop In........................................................................................................................ 9
Tool – Setting ............................................................................................................................. 1
Skin – Outer Header .................................................................................................................. 1
Tape – Silicone Sponge (Use With Items 21 thru 25) ...............................................................AR
Mach. Screw 1/4-20 x 3/4 Phil. Flat Hd. ........................................................................................ 4
Collar – Door Switch .................................................................................................................. 1
*Sold Per Inch
**Sold Per Foot
***Replacement bulb is standard 40 W. appliance bulb purchased locally.
****Machines built before 2/01/07 must order items 9 & 10.
- 11 -
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
2
1
3
4
7
8
9
10
20
11
12-13
18-19
5
16
14
17
6
15
21-22-23
24
33
25-26
27
28
32
31
29-30
CABINET (ML-132358)
(CURRENT CONSTRUCTION ON OR AFTER 8/1/05)
F-43070 Rev. C (June 2008)
- 12 -
PL-57920
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
CABINET (ML-132358)
(CURRENT CONSTRUCTION ON OR AFTER 8/1/05)
ILLUS.
PL-57920
1
2
3
4
5
6
**7
8
9
10
11
****12
****13
14
15
***16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
*
PART NO.
01-1M5672-00002
01-1M5672-00001
01-1M5672-00002
01-1M5672-00001
01-1M5672-00002
01-1M5672-00001
01-100V21-00056
01-100V17-00266
01-100V17-00259
01-1000V0-00038
01-1000V0-00031
01-1M5918-00001
01-1M5918-00002
01-1M1711-0003C
01-1M5430-00001
01-1000V7-00027
01-1M2335-00001
01-1M5289-00003
01-1M5289-00001
01-100V18-0120A
01-1M5872-00001
01-1M2073-00004
01-1M2071-00102
01-1M5872-00001
01-1M5872-00102
01-1M5872-00001
01-1M5872-00001
01-1M5872-00001
01-1M2086-00001
01-1M5869-00001
01-1000V4-00073
01-1000V4-0073A
01-100V17-00301
01-100V21-00073
01-1000V4-00074
01-1M2346-00001
NAME OF PART
AMT.
Skin – Outer ............................................................................................................................... 1
Skin – Outer ............................................................................................................................... 1
Skin – Outer ............................................................................................................................... 1
Skin – Outer ............................................................................................................................... 1
Skin – Outer ............................................................................................................................... 1
Skin – Outer ............................................................................................................................... 1
Tape – Fiberglass .....................................................................................................................AR
Bushing 3/8 NPT x 3/4 NPT (Brass).............................................................................................. 1
Plug – Pipe 3/8 NPT (Brass) ....................................................................................................... 1
Bearing – Journal (Nylon) .......................................................................................................... 4
Bearing – (Nylon) (W/Shoulder)................................................................................................. 4
Hinge – Door (Female) (Machines Built On or After 2/01/07) .................................................... 2
Hinge Assy. – Door (Machines Built On or After 2/01/07) .......................................................... 2
Plate – Cover Latch ................................................................................................................... 1
Skin – Outer Header .................................................................................................................. 1
Lamp – Oven (Complete) (Lens and Base) ............................................................................... 5
Wheel (For Installation).............................................................................................................. 1
Gasket – Loading Door (Top)..................................................................................................... 1
Gasket – Loading Door (Side) ................................................................................................... 2
Strike – Chrome Plated.............................................................................................................. 1
Floor Trim Kit (Machines Built On or After 11/01/07).................................................................. 1
Body – Floor Trim (Machines Built Before 11/01/07) ................................................................. 1
Body – Joiner Corner (Machines Built Before 11/01/07) ............................................................ 1
Floor Trim Kit (Machines Built On or After 11/01/07).................................................................. 1
Trim – Floor Rear (Machines Built On or After 11/01/07) ........................................................... 1
Floor Trim Kit (Machines Built On or After 11/01/07).................................................................. 1
Floor Trim Kit (Machines Built On or After 11/01/07).................................................................. 1
Floor Trim Kit (Machines Built On or After 11/01/07).................................................................. 1
Floor (Machines Built Before 11/01/07)...................................................................................... 1
Floor – Single (Machines Built On or After 11/01/07) ................................................................. 1
Anchor – Drop In........................................................................................................................ 9
Tool – Setting ............................................................................................................................. 1
Ell – 2.5 x 45 Deg. Blk. .............................................................................................................. 1
Tape – Silicone Sponge (Use With Items 21 thru 28) ...............................................................AR
Mach. Screw 1/4-20 x 3/4 Phil. Flat Hd. ........................................................................................ 4
Collar – Door Switch .................................................................................................................. 1
*Sold Per Inch
**Sold Per Foot
***Replacement bulb is standard 40 W. appliance bulb purchased locally.
****Machines built before 2/01/07 must order items 12 & 13.
- 13 -
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
2
1
3
4
17
16
15
5
14
23
13
11-12
21-22
6
19
10
20
7
18
34
9
8
33
26
27
35
28
29
25
24
PL-57921
30-31-32
CABINET (ML-132280)
(PREVIOUS CONSTRUCTION BEFORE 8/1/05)
F-43070 Rev. C (June 2008)
- 14 -
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
CABINET (ML-132280)
(PREVIOUS CONSTRUCTION BEFORE 8/1/05)
ILLUS.
PL-57921
1
2
3
4
5
6
7
8
9
10
***11
***12
13
14
15
16
*17
18
**19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
PART NO.
01-1M2120-00011
01-1M2120-00012
01-1M5267-00001
01-1M5672-00002
01-1M2120-00004
01-1M2120-00012
01-1M2120-00011
01-1M5285-00001
01-100V17-00301
01-1M1711-0003C
01-1M5918-00001
01-1M5918-00002
01-1000V0-00031
01-1000V0-00038
01-100V17-00259
01-100V17-00266
01-100V21-00056
01-1M5030-00001
01-1000V7-00027
01-1M2335-00001
01-1M5289-00002
01-1M5289-00001
01-100V18-0120A
01-1M2072-00003
01-1M5564-00002
01-1M5004-00003
01-1M5564-00001
01-1000V4-0073A
01-1000V4-00073
01-1M5610-00201
01-1M5570-00001
01-1M5004-00001
01-1M5004-00002
01-1000V4-00074
01-1M2346-00001
01-1M5610-00002
01-1M2211-00002
01-1M2131-00007
01-1M2341-00002
NAME OF PART
AMT.
Skin – Outer (Non-Symmetrical Flanges) .................................................................................. 1
Skin – Outer (Symmetrical Flanges) .......................................................................................... 1
Skin – Outer Drain ..................................................................................................................... 1
Skin – Outer Split Assy............................................................................................................... 1
Skin – Outer ............................................................................................................................... 1
Skin – Outer (Symmetrical Flanges) .......................................................................................... 1
Skin – Outer (Non-Symmetrical Flanges) .................................................................................. 1
Jamb – Stop............................................................................................................................... 1
Ell – 2.5 x 45 Deg. Blk. .............................................................................................................. 1
Plate – Cover Latch ................................................................................................................... 1
Hinge – Door (Female) (Machines Built On or After 2/01/07) .................................................... 2
Hinge Assy. – Door (Machines Built On or After 2/01/07) .......................................................... 2
Bearing – (Nylon) (W/Shoulder)................................................................................................. 4
Bearing – Journal (Nylon) .......................................................................................................... 4
Plug – Pipe 3/8 NPT (Brass) ....................................................................................................... 1
Bushing 3/8 NPT x 3/4 NPT (Brass).............................................................................................. 1
Tape – Fiberglass .....................................................................................................................AR
Skin – Outer Header .................................................................................................................. 1
Lamp – Oven (Complete) (Lens and Base) ............................................................................... 5
Wheel (For Installation).............................................................................................................. 1
Gasket – Loading Door 50 In. (Top)........................................................................................... 1
Gasket – Loading Door 83 In. (Side) ......................................................................................... 2
Strike – Chrome Plated.............................................................................................................. 1
Trim – Floor (46 In.) ................................................................................................................... 1
Skin – Floor (RH) ....................................................................................................................... 1
Trim – Floor................................................................................................................................ 1
Skin – Floor (LH) ........................................................................................................................ 1
Tool – Setting ............................................................................................................................. 1
Anchor – Drop-in........................................................................................................................ 9
Screw 1/4-20 x 1/2 or 1 (As Needed) ...........................................................................................AR
Shim – Jamb Plate (Not Shown)...............................................................................................AR
Threshold Weldment .................................................................................................................. 1
Trim – Floor................................................................................................................................ 1
Trim – Floor................................................................................................................................ 1
Screw 10-32 Phil. Hd. (SST)...................................................................................................... 6
Mach. Screw 1/4-20 x 3/4 Phil. Hd. ............................................................................................... 4
Collar – Door Switch .................................................................................................................. 1
Kit – Threshold Installation (Incls. Items 28 thru 32, & 35) ........................................................ 1
Skin – Ceiling ............................................................................................................................. 1
Top – False (Ceiling) .................................................................................................................. 1
Angle – Hood Trim ..................................................................................................................... 1
*Sold Per Foot
**Replacement bulb is standard 40 W. appliance bulb purchased locally.
***Machines built before 2/01/07 must order items 11 & 12.
- 15 -
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
2
1
3
4
8-9-10
11
12
5
13
23
14
15-16
21-22
6
19
17
20
7
18
39
24
25
40
38
36-37
30
26
35
34
31-32-33
27
PL-57922
28-29
CABINET (ML-132280)
(CURRENT CONSTRUCTION ON OR AFTER 8/1/05)
F-43070 Rev. C (June 2008)
- 16 -
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
CABINET (ML-132280)
(CURRENT CONSTRUCTION ON OR AFTER 8/1/05)
ILLUS.
PL-57922
1
2
3
4
5
6
7
*8
9
10
11
12
13
14
***15
***16
17
18
**19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
PART NO.
01-1M5672-00003
01-1M5672-00001
01-1M5672-00004
01-1M5672-00005
01-1M5672-00105
01-1M5672-00001
01-1M5672-00003
01-100V21-00056
01-1000V4-00283
01-1000V4-00284
01-100V17-00266
01-100V17-00259
01-1000V0-00038
01-1000V0-00031
01-1M5918-00001
01-1M5918-00002
01-1M1711-0003C
01-1M5030-00001
01-1000V7-00027
01-1M2335-00001
01-1M5289-00002
01-1M5289-00001
01-100V18-0120A
01-100V17-00301
01-1M5285-00001
01-1M2071-00003
01-1M2072-00003
01-1M5564-00002
01-1M5928-00202
01-1M5610-00201
01-1M5570-00001
01-1000V4-00073
01-1000V4-0073A
01-1M5564-00001
01-1M5928-00201
01-1M5004-00003
01-1M5004-00002
01-1M5004-00001
01-1000V4-00074
01-1M2346-00001
01-1M5610-00002
01-1M2211-00002
01-1M2131-00007
01-1M2341-00002
01-1M5152-00001
01-1M5152-00002
01-1M5152-00003
01-1M5152-00004
01-1M2549-00001
01-1M2549-00002
NAME OF PART
AMT.
Skin – Outer (Non-Symmetrical Flanges) (31 In.)...................................................................... 1
Skin – Outer (Symmetrical Flanges) (20 In.) ............................................................................. 1
Skin – Outer Drain ..................................................................................................................... 1
Panel – Outer Wall Split ............................................................................................................. 1
Skin – Outer Split ....................................................................................................................... 1
Skin – Outer (Symmetrical Flanges) (20 In.) ............................................................................. 1
Skin – Outer (Non-Symmetrical Flanges) (31 In.)...................................................................... 1
Tape – Fiberglass .....................................................................................................................AR
Screw 1/4-20 x 3/4 Hex Washer Hd., Serrated Flange (SST) ......................................................AR
Screw 10-32 x 3/4 Hex Washer Hd., Serrated Flange (SST) .....................................................AR
Bushing 3/8 NPT x 3/4 NPT (Brass).............................................................................................. 1
Plug – Pipe 3/8 NPT (Brass) ....................................................................................................... 1
Bearing – Journal (Nylon) .......................................................................................................... 4
Bearing – (Nylon) (W/Shoulder)................................................................................................. 4
Hinge – Door (Female) (Machines Built On or After 12/01/07) .................................................. 2
Hinge Assy. – Door (Machines Built On or After 12/01/07) ........................................................ 2
Plate – Cover Latch ................................................................................................................... 1
Skin – Outer Header .................................................................................................................. 1
Lamp – Oven (Complete) (Lens and Base) ............................................................................... 5
Wheel (For Installation).............................................................................................................. 1
Gasket – Loading Door 50 In. (Top)........................................................................................... 1
Gasket – Loading Door 83 In. (Side) ......................................................................................... 2
Strike – Chrome Plated.............................................................................................................. 1
Ell – 2.5 x 45 Deg. Blk. .............................................................................................................. 1
Jamb – Stop............................................................................................................................... 1
Corner – Floor Trim Joiner ......................................................................................................... 1
Trim – Floor (46 In.) ................................................................................................................... 1
Skin – Floor (RH) (Machines Built Before 12/01/07) .................................................................. 1
Skin – Floor (RH) (Machines Built On or After 12/01/07) ........................................................... 1
Screw 10-32 Phil. Hd. (SST)...................................................................................................... 6
Screw 1/4-20 x 1/2 or 1 (As Needed) ...........................................................................................AR
Shim – Jamb Plate (Not Shown)...............................................................................................AR
Threshold Weldment .................................................................................................................. 1
Anchor – Drop-in........................................................................................................................ 9
Tool – Setting ............................................................................................................................. 1
Skin – Floor (LH) (Machines Built Before 12/01/07) .................................................................. 1
Skin – Floor Trim Joiner (LH) (Machines Built On or After 12/01/07)......................................... 1
Trim – Floor................................................................................................................................ 1
Trim – Floor................................................................................................................................ 1
Trim – Floor................................................................................................................................ 1
Mach. Screw 1/4-20 x 3/4 Phil. Hd. ............................................................................................... 4
Collar – Door Switch .................................................................................................................. 1
Kit – Threshold Installation (Incls. Items 30 thru 35) (Machines Built Before 12/02/04) ............ 1
Skin – Ceiling ............................................................................................................................. 1
Top – False (Ceiling) .................................................................................................................. 1
Angle – Hood Trim ..................................................................................................................... 1
Hardware Package – Double ..................................................................................................... 1
Hardware Package – Security ................................................................................................... 1
Hardware Package – Single Split .............................................................................................. 1
Hardware Package – Single Whole ........................................................................................... 1
Insulation Kit – Double Split ....................................................................................................... 1
Insulation Kit – Single Split ........................................................................................................ 1
*Sold Per Foot
**Replacement bulb is standard 40 W. appliance bulb purchased locally.
***Machines built before 2/01/07 must order items 15 & 16.
- 17 -
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
6-7
4-5
1
2-3
8-9
10
11
17
16
15
12
14
PL-57923
13
HOOD (ML-132358)
ILLUS.
PL-57923
1
2
3
4
5
6
7
8
9
*10
11
12
13
14
15
16
17
PART NO.
01-100V16-00531
01-1M5485-00001
01-1M5485-00002
01-1M5351-00001
01-1M5945-00101
01-1M5352-00001
01-1M5945-00102
01-1M5351-00001
01-1M5945-00101
01-100V17-00004
FP-078-49
01-1M5489-00001
01-1M3032-00001
01-100V18-00089
01-1M2247-00001
01-100V18-00088
01-1M5492-00001
NAME OF PART
Logo ........................................................................................................................................... 1
Hood Assy. Type I (Incls. Items 12, 14, 15, & 16) ...................................................................... 1
Hood Assy. Type II (Incls. Items 12 & 17) .................................................................................. 1
Trim – Side (Machines Built Before 5/01/07) ............................................................................. 1
Trim – Side Hood (Single Rack) (Machines Built On or After 5/01/07) ...................................... 1
Trim – Rear (Machines Built Before 5/01/07)............................................................................. 1
Trim – Rear Hood (Single Rack) (Machines Built On or After 5/01/07)...................................... 1
Trim – Side (Machines Built Before 5/01/07) ............................................................................. 1
Trim – Side Hood (Single Rack) (Machines Built On or After 5/01/07) ...................................... 1
Tube 1/4 O.D. x 72 In. Lg. (Alum.)............................................................................................... 1
Fitting – Tube (1/4 In.) (Brass) ..................................................................................................... 1
Baffle – Hood Assy. .................................................................................................................... 1
Cup – Hood Grease ................................................................................................................... 1
Filter – Hood 16 x 20 W/Drop (Type I Hood) ............................................................................. 1
Filler – Filter (Type I Hood) ........................................................................................................ 1
Filter – Hood 16 x 16 W/Drop (Type I Hood) ............................................................................. 2
Panel – Baffle (Type II Hood)..................................................................................................... 1
*Sold Per Inch
F-43070 Rev. C (June 2008)
AMT.
- 18 -
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
4
12-13
1
10-11
2
5 THRU 9
14-15
16
3
17
22
21
20
19
PL-57924
18
HOOD (ML-132280)
ILLUS.
PL-57924
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
*16
17
18
19
20
21
22
PART NO.
01-1M4547-00004
01-1M4548-00004
01-100V16-00531
01-1M5148-00002
01-1M5378-00003
01-1M5681-00001
01-100V13-00134
01-100V13-00135
01-1M5147-00002
01-1M5351-00002
01-1M5945-00201
01-1M5352-00002
01-1M5945-00202
01-1M5351-00002
01-1M5945-00201
01-100V17-00004
FP-078-49
01-1M3032-00001
01-100V18-00089
01-1M2247-00002
01-100V18-00088
01-1M5140-00002
01-1M5690-00001
01-1M5690-00002
01-1M5690-00003
01-1M5690-00004
01-1M5884-00001
NAME OF PART
AMT.
Trim – Hood (Upper) (Machines Built Before 6/1/03)................................................................. 1
Trim – Hood (Lower) (Machines Built Before 6/1/03)................................................................. 1
Logo ........................................................................................................................................... 1
Cover – Facia Trim (Machines Built Before 6/1/03) ................................................................... 2
Hood Assy. (Machines Built Before 8/1/05)................................................................................ 1
Hood Assy. (Machines Built On or After 8/1/05) ......................................................................... 1
Box – Filter (19 3/4 x 15 9/16) (Type I Hood)............................................................................. 1
Plenum – Panel Box (15 9/16 x 1) (Type II Hood) ..................................................................... 1
Panel – Plenum (Type II Hood).................................................................................................. 2
Trim – Side (Machines Built After 6/1/03) .................................................................................. 1
Trim – Side (Double Rack)......................................................................................................... 1
Trim – Rear ................................................................................................................................ 1
Trim – Rear (Double Rack) ........................................................................................................ 1
Trim – Side (Machines Built After 6/1/03) .................................................................................. 1
Trim – Side (Double Rack)......................................................................................................... 1
Tube 1/4 O.D. x 72 In. Lg. (Alum.)............................................................................................... 1
Fitting – Tube (1/4 In.) (Brass) ..................................................................................................... 1
Cup – Hood Grease ................................................................................................................... 1
Filter – Hood 16 x 20 W/Drop (Type I Hood) ............................................................................. 1
Filler – Filter ............................................................................................................................... 1
Filter – Hood 16 x 16 W/Drop (Type I Hood) ............................................................................. 3
Deflector – Air ............................................................................................................................ 1
Kit – Hood Assy. (Type I Hood) (Machines Built Before 8/1/05)
(Incls. Items 3, 5, 7, 10, 12, 14, & 19 thru 22)............................................................................ 1
Kit – Hood Assy. (Type II Hood) (Machines Built Before 8/1/05)
(Incls. Items 3, 5, 8, 9, 10, 12, 14, 20, & 22) .............................................................................. 1
Kit – Hood Assy. (Type I Hood) (Machines Built On or After 8/1/05)
(Incls. Items 3, 6, 7, 10, 12, 14, & 19 thru 22)............................................................................ 1
Kit – Hood Assy. (Type II Hood) (Machines Built On or After 8/1/05)
(Incls. Items 3, 6, 8, 9, 10, 12, 14, 20 & 22) ............................................................................... 1
Kit – Hood Assy. (Machines Built On or After 05/01/07)
(Incls. Items 10, 11, 13, & 15) .................................................................................................... 1
*Sold Per Inch
- 19 -
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
12 THRU 15
8 THRU 11
6
7
16-17
5
18-19
2-3-4
20
22
21
23-24-25
PL-57825
1
LOADING DOOR (ML-132358)
F-43070 Rev. C (June 2008)
- 20 -
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
LOADING DOOR (ML-132358)
ILLUS.
PL-57825
1
*2
3
4
**5
6
7
8
9
10
**11
12
13
14
15
16
***17
18
***19
20
21
22
****23
****24
25
PART NO.
01-1M2133-00001
01-100V18-0120B
01-100V16-00259
01-1M5910-00001
01-100V21-00065
01-1M2135-00001
01-1M2254-00001
01-1M4171-00002
01-100V16-0102C
00-513886-00003
01-100V16-00611
01-1M1435-00002
01-100V20-00010
01-1M1761-0001C
01-1000V1-00036
01-1M2937-00002
01-100V21-0039A
01-1M2937-00001
01-100V21-0039A
01-1M2255-00001
01-1M2778-00001
01-1M2769-00001
01-1M5918-00002
01-1M5918-00001
01-1M5918-00201
01-1M5551-00001
01-1M5551-00004
01-1000V4-00067
01-1000V4-00074
01-1A2876-00101
01-1M5289-00003
NAME OF PART
AMT.
Weldment – Door ....................................................................................................................... 1
Handle – Chrome Plated ........................................................................................................... 1
Label – Warning ......................................................................................................................... 1
Spacer – Door Handle ............................................................................................................... 1
Tape – Fiberglass (1/8 x 1) ...................................................................................................... 18 Ft.
Skin – Inner Door ....................................................................................................................... 1
Guide – Door Switch Actuator.................................................................................................... 1
Window Glass Assy. (Incls. Items 9, 10, & 11) ........................................................................... 1
Glass – Tempered 1/4 In. Thick ................................................................................................... 1
Sealer .......................................................................................................................................AR
Gasket – Window................................................................................................................... 12 Ft.
Handle – Interior Door (Incls. Items 13, 14, & 15) ..................................................................... 1
Spring – Compression 7/16 O.D. ................................................................................................. 1
Plate – Interior Door Handle ...................................................................................................... 1
Ring – Retaining 7/16 In. (Zinc).................................................................................................... 1
Retainer – Window .................................................................................................................... 2
Tape – Silicone (1/8 x 3/4)..........................................................................................................10 In.
Retainer – Window .................................................................................................................... 2
Tape – Silicone (1/8 x 3/4)..........................................................................................................62 In.
Clamp – Floor Sweep ................................................................................................................ 1
Strip – Silicone Floor Seal ......................................................................................................... 1
Support – Floor Seal .................................................................................................................. 1
Hinge Assy. – Door (Machines Built Before 2/01/07) (Incls. Item 25) ........................................ 2
Hinge – Door (Female) (Machines Built On or After 2/01/07) .................................................... 2
Pin – Hinge Loading Door.......................................................................................................... 2
Door Assy. – Loading (Incls. Items 1 thru 25) ............................................................................ 1
Door Assy. – Loading W/Grid (Packaged) ................................................................................. 1
Speed Nut ................................................................................................................................. 26
Mach. Screw Flat Hd. ............................................................................................................... 16
Guard – Window 210 ................................................................................................................. 5
Gasket – Loading Door .............................................................................................................. 1
* Order With 01-100V16-00259.
**Sold Per Foot
***Sold Per Inch
****Machines built before 2/01/07 must order items 23 & 24.
- 21 -
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
20 THRU 23
11 THRU 19
7-8-9
10
6
24 THRU 28
29 THRU 32
3-4-5
33
35
1-2
34
36 THRU 39
PL-58742
LOADING DOOR (ML-132280)
F-43070 Rev. C (June 2008)
- 22 -
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
LOADING DOOR (ML-132280)
ILLUS.
PL-58742
1
2
3
4
5
*6
7
8
9
10
11
12
13
14
15
16
*17
18
19
20
21
22
23
24
25
26
**27
**28
29
30
**31
**32
33
34
35
***36
***37
38
39
PART NO.
01-1M5590-00002
01-1M2133-00002
01-100V18-0120B
01-100V16-00259
01-1M5910-00001
01-100V21-00065
01-1M5376-00002
01-1M2135-00002
01-1M5591-00001
01-1M2254-00001
01-1M4171-00003
01-1M4171-00002
01-100V16-00643
01-100V16-0102J
01-100V16-0102C
00-513886-00003
01-100V21-00060
01-100V16-00611
01-100V16-0644A
01-1M1435-00002
01-100V20-00010
01-1M1761-00001
01-1000V1-00036
01-1M2937-00003
01-1M2937-00002
01-1M5574-00001
01-100V21-0039A
01-100V21-00162
01-1M2937-00001
01-1M5574-00002
01-100V21-0039A
01-100V21-00162
01-1M2255-00002
01-1M2778-00002
01-1M2769-00002
01-1M5918-00002
01-1M5918-00001
01-1M5918-00201
01-1000V0-00080
01-1000V4-00067
01-1000V4-00074
01-1M5289-00001
01-1M5289-00002
01-1A2876-00101
01-1A2876-00102
01-1M5551-00005
01-1M5551-00006
01-1M5551-00003
01-1M5592-00201
NAME OF PART
AMT.
Weldment – Door (21 In. Window) ............................................................................................. 1
Weldment – Door (10 In. Window) ............................................................................................. 1
Handle – Chrome Plated ........................................................................................................... 1
Label – Warning ......................................................................................................................... 2
Spacer – Door Handle ............................................................................................................... 1
Tape – Fiberglass (1/8 x 1) ...................................................................................................... 20 Ft.
Skin – Inner Door (21 In. Window) ............................................................................................. 1
Skin – Inner Door (10 In. Window) ............................................................................................. 1
Skin – Inner Door (Wide Window) ............................................................................................. 1
Guide – Door Switch Actuator.................................................................................................... 1
Window Glass Assy. (21 In. Window) (Incls. Items 14, 16, & 17) (Previous Construction) ........ 1
Window Glass Assy. (10 In. Window) (Incls. Items 15, 16, & 18) .............................................. 1
Glass – Triple Pane (21 In. Window) (Current Construction)..................................................... 1
Glass – Tempered 1/4 In. Thick (21 In. Window)......................................................................... 1
Glass – Tempered 1/4 In. Thick (10 In. Window)......................................................................... 1
Sealer .......................................................................................................................................AR
Gasket – U (Silicone) (21 In. Window) (Use With Item 14)........................................................ 1
Gasket – Window (10 In. Window) ............................................................................................ 1
Gasket – Window (21 In. Window) (Use With Item 13) ............................................................. 1
Handle – Interior Door (Incls. Items 21 thru 23)......................................................................... 1
Spring – Compression 7/16 O.D. ................................................................................................. 1
Plate – Interior Door Handle ...................................................................................................... 1
Ring – Retaining 7/16 In. (Zinc).................................................................................................... 1
Retainer – Window (Horizontal) (21 In. Window) (Incls. Item 27) (Previous Construction) ....... 2
Retainer – Window (Horizontal) (10 In. Window) (Incls. Item 27) .............................................. 2
Retainer – Window (Horizontal) (21 In. Window) (Current Construction) .................................. 2
Tape – Silicone (1/8 x 3/4)..........................................................................................................22 In.
Tape – Silicone Foam (Current Construction) ...........................................................................AR
Retainer – Window (Vertical) (21 In. Window) (Incls. Item 31) (Previous Construction) ............ 2
Retainer – Window (Vertical) (10 In. Window) (Incls. Item 32) (Current Construction) .............. 2
Tape – Silicone (1/8 x 3/4)..........................................................................................................62 In.
Tape – Silicone Foam ...............................................................................................................AR
Clamp – Floor Sweep ................................................................................................................ 1
Strip – Silicone Floor Seal ......................................................................................................... 1
Support – Floor Seal .................................................................................................................. 1
Hinge – Door (Male) (Machines Built Before 2/01/07) (Incls. Item 38) ...................................... 2
Hinge – Weldment (Female) (Machines Built On or After 2/01/07) ............................................ 2
Pin – Hinge Loading Door.......................................................................................................... 2
Bearing – Door Hinge (Brass).................................................................................................... 2
Speed Nut .................................................................................................................................AR
Mach. Screw 1/4-20 x 3/4 Flat Hd. ...............................................................................................AR
Gasket – Loading Door Jamb .................................................................................................... 1
Gasket – Loading Door Header ................................................................................................. 1
Guard – Window 210 ................................................................................................................. 5
Guard – Window HBA2.............................................................................................................. 5
Door Assy. – Loading W/Grid (10 In. Window) (Packaged) ....................................................... 1
Door Assy. – Loading W/Grid (21 In. Window) (Packaged) ....................................................... 1
Door Assy. – Loading (Wide Window) (Packaged) (Machines Built On or After 6/01/03) .......... 1
Guard – Window (21 In. Window Triple – Pane)........................................................................ 5
*Sold Per Foot
**Sold Per Inch
***Machines built before 2/01/07 must order items 36 & 37.
- 23 -
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
11
12 THRU 15
9-10
7
8
16-17
6
18-19
3-4-5
20
22
21
2
23
PL-58743
1
DOOR ASSEMBLY (PUSH LOCK TYPE)
F-43070 Rev. C (June 2008)
- 24 -
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
DOOR ASSEMBLY (PUSH LOCK TYPE)
ILLUS.
PL-58743
1
2
*3
4
5
**6
7
8
9
10
11
12
13
14
15
16
***17
18
***19
20
21
22
23
PART NO.
01-1M6033-00001
01-100V16-0168C
01-100V18-0120B
01-100V16-00259
01-1M5910-00001
01-100V21-00065
01-1M6034-00101
01-1M2254-00001
01-100V16-00709
01-100V16-0644B
01-1M5920-00209
01-1M1435-00002
01-100V20-00010
01-1M1761-00001
01-1000V1-00036
01-1M6030-00001
01-100V21-00162
01-1M5843-00001
01-100V21-00162
01-1M6034-00102
01-100V16-0683A
01-1M6034-00103
01-1M5918-00001
01-1M6034-00001
01-1M5092-00006
NAME OF PART
AMT.
Weldment – Door ....................................................................................................................... 1
Label – Caution.......................................................................................................................... 1
Handle – Chrome Plated ........................................................................................................... 1
Label – Warning ......................................................................................................................... 1
Spacer – Door Handle ............................................................................................................... 1
Tape – Fiberglass (1/8 x 1) ...................................................................................................... 30 Ft.
Skin – Inner Door ....................................................................................................................... 1
Guide – Door Switch Actuator.................................................................................................... 1
Glass – Triple Pane ................................................................................................................... 1
Gasket – Window (1 Pc. Fused Corner) .................................................................................... 1
Cover – Inner Door Latch .......................................................................................................... 2
Handle – Interior Door (Incls. Items 12 thru 15)......................................................................... 1
Spring – Compression 7/16 O.D. ................................................................................................. 1
Plate – Interior Door Handle ...................................................................................................... 1
Ring – Retaining 7/16 In. (Zinc).................................................................................................... 1
Retainer – Horizontal Door Glass .............................................................................................. 2
Tape – Silicone Foam (1/8 x 111/64) ...........................................................................................10 In.
Retainer – Window .................................................................................................................... 2
Tape – Silicone Foam (1/8 x 111/64) ...........................................................................................60 In.
Sweep – Inner Door ................................................................................................................... 1
Gasket – Floor Sweep ............................................................................................................... 1
Sweep – Outer Door .................................................................................................................. 1
Hinge – Door (Female) .............................................................................................................. 2
Door Assy. – Push Lock (Incls. Items 1 thru 23) ........................................................................ 1
Insulation (Packaged) ................................................................................................................ 1
* Order With 01-100V16-00259.
**Sold Per Foot
***Sold Per Inch
- 25 -
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
1
2
3-4
5
6
14
7
13
8
10
12
11
9
21
17
18
19
20
16
15
CONTROL CABINET, DOOR, AND CONTROLLER (ML-132358)
F-43070 Rev. C (June 2008)
- 26 -
22 THRU 25
PL-57925
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
CONTROL CABINET, DOOR, AND CONTROLLER (ML-132358)
ILLUS.
PL-57925
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
*23
24
25
PART NO.
01-1M5150-00001
01-1M5482-00001
01-100V21-00092
01-100V21-00148
01-100V18-00091
01-100V18-00161
01-1000V4-00165
01-1M5480-00001
01-1M2777-00001
01-1M1934-00001
01-1000V4-00165
01-1M1934-00002
01-1M5149-00001
01-1M5479-00001
01-1M5482-00001
01-1M5405-00001
01-100V16-00590
01-100V16-00648
01-100V16-00565
01-1000V4-00165
01-1000V5-00164
01-100V16-0545A
01-100V16-0546A
01-100V16-0546C
01-100V23-00F10
01-1M5569-00003
01-1M5569-00004
01-100V10-00223
01-100V11-0030A
01-100V16-00584
01-1000V6-00249
01-1M5035-00002
01-1M5670-00001
NAME OF PART
AMT.
Cover – Light Access ................................................................................................................. 1
Angle – Control Cabinet............................................................................................................. 2
Gasket – PVC Extruded “B” Shape ........................................................................................ 6 Ft.
Trim – Rubber Edge................................................................................................................... 1
Handle ....................................................................................................................................... 1
Latch .......................................................................................................................................... 1
Nut Hex ...................................................................................................................................... 2
Door – Control Assy. (Incls. Items 2, 3, 5, 6, 9, & 12) ................................................................ 1
Strap – Ground .......................................................................................................................... 1
Hinge – Control Door (Male) ...................................................................................................... 3
Nut Hex ...................................................................................................................................... 6
Hinge – Control Door (Female).................................................................................................. 3
Panel – Light Service Access .................................................................................................... 1
Catch – Control Door ................................................................................................................. 1
Bracket ....................................................................................................................................... 2
Cover – Controller...................................................................................................................... 1
EPROM (Standard).................................................................................................................... 1
EPROM (Advanced) .................................................................................................................. 1
PC Board – Control (Standard & Advanced) ............................................................................. 1
Nut ............................................................................................................................................. 8
Spacer – PC Board .................................................................................................................... 8
Overlay – Controller (Standard) ................................................................................................. 1
Overlay – Controller (Advanced) ............................................................................................... 1
Overlay – No Steps With Jog (Panera) ...................................................................................... 1
Fuse (1A., 250V.) ....................................................................................................................... 1
Kit – Conversion (Standard to Advanced).................................................................................. 1
Kit – Conversion (Advanced to Standard) ................................................................................. 1
Alarm – Piezo Pre-wired ............................................................................................................ 1
Connector – Seal Flex (3/8 x 90 Deg.) ........................................................................................ 2
Label – Control Status ............................................................................................................... 1
Switch – Key Security ................................................................................................................ 1
Harness – Main (Machines Built Before 8/03/05) ...................................................................... 1
Harness – Main (Machines Built On or After 8/03/05) ............................................................... 1
* On Units Built Before 3/28/05, Order Item 18.
- 27 -
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
2-3
1
4
5
6
14
7
8
10
13
12
16
11
9
17
15
20
21
22
PREVIOUS CONSTRUCTION
24
23
18-19
CONTROL CABINET, DOOR, AND CONTROLLER (ML-132280)
F-43070 Rev. C (June 2008)
- 28 -
25-26
PL-57926
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
CONTROL CABINET, DOOR, AND CONTROLLER (ML-132280)
ILLUS.
PL-57926
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
*26
PART NO.
01-1M5150-00001
01-1M5175-00001
01-1M5482-00001
01-100V21-00092
01-100V18-00091
01-100V18-00161
01-1000V4-00165
01-1M4992-00001
01-1M2777-00001
01-1M1934-00001
01-1000V4-00165
01-1M1934-00002
01-1M5149-00001
01-1M5479-00001
01-100V16-00055
01-1M1911-00102
01-1M1911-00101
01-1M5060-00001
01-1M5405-00001
01-100V16-00590
01-100V16-00648
01-100V16-00565
01-1000V4-00165
01-1000V5-00164
01-100V16-0545A
01-100V16-0546A
01-1M5569-00003
01-1M5569-00004
01-100V10-00223
01-100V11-0030A
01-100V16-00584
NAME OF PART
AMT.
Cover – Light Access ................................................................................................................. 1
Angle – Control Cabinet (Machines Built Before 3/15/04) ......................................................... 1
Angle – Control Cabinet (Machines Built After 4/01/04) ............................................................ 2
Gasket – PVC Extruded “B” Shape ........................................................................................ 6 Ft.
Handle ....................................................................................................................................... 1
Latch (Machines Built After 4/01/04) .......................................................................................... 1
Nut Hex ...................................................................................................................................... 2
Door – Control ........................................................................................................................... 1
Strap – Ground .......................................................................................................................... 1
Hinge – Control Door (Male) ...................................................................................................... 3
Nut Hex ...................................................................................................................................... 6
Hinge – Control Door (Female).................................................................................................. 3
Panel – Service Access ............................................................................................................. 1
Catch – Control Door (Machines Built On or After 4/01/04) ....................................................... 1
Magnet (Machines Built Before 4/01/04) ................................................................................... 1
Backer – Magnet Holder (Machines Built Before 4/01/04)......................................................... 1
Body – Magnet Holder (Machines Built Before 4/01/04)............................................................ 1
Cover – Controller (Machines Built Before 4/01/04) .................................................................. 1
Cover – Controller (Machines Built On or After 4/01/04) ........................................................... 1
EPROM (Standard).................................................................................................................... 1
EPROM (Advanced) .................................................................................................................. 1
PC Board – Control (Standard & Advanced) ............................................................................. 1
Nut Hex ...................................................................................................................................... 8
Spacer – PC Board .................................................................................................................... 8
Overlay – Controller (Standard) ................................................................................................. 1
Overlay – Controller (Advanced) ............................................................................................... 1
Kit – Conversion (Standard to Advanced).................................................................................. 1
Kit – Conversion (Advanced to Standard) ................................................................................. 1
Alarm – Piezo Pre-wired ............................................................................................................ 1
Connector – Seal Flex (3/8 x 90 Deg.) ........................................................................................ 2
Label – Control Status ............................................................................................................... 1
* On Units Built Before 3/28/05, Order Item 21.
- 29 -
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
9
10-11-12
8
1
2
13-14
3
16
15
4
17
18
19
36
5
20
6
35
7
21
33
32
34
22
23
24
28
29
25
31
26
PL-57991
30
27
BLOWER, PANELS, AND VENTS (ML-132358)
F-43070 Rev. C (June 2008)
- 30 -
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
BLOWER, PANELS, AND VENTS (ML-132358)
ILLUS.
PL-57991
1
*2
3
4
5
6
7
8
*9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
PART NO.
01-1M5462-00001
01-100V21-00072
01-1M5834-00001
01-1M5514-00002
01-1M5101-00001
01-1M1433-00001
01-1A1828-00001
01-1M2451-00001
01-100V21-00058
01-1M5456-00001
01-1M5542-00001
01-1M2227-00001
01-1000V8-00052
01-1000V8-00067
01-100V11-00073
01-1M1360-00001
01-1M2458-00001
01-1M1794-00001
01-1M1795-00001
01-1M2059-00001
01-1000V8-00041
01-1000V1-00028
01-1M2101-00004
01-1M2579-00001
01-1M2479-00003
01-1M2479-00002
01-1M5459-00001
01-1M5523-00001
01-1M5459-00002
01-1M2089-00001
01-1M5473-00001
01-1M5476-00001
01-1M2222-00001
01-1M2074-00001
01-1M2223-00001
01-1M2224-00001
01-1M2060-00002
01-1M2060-00004
01-1M5827-0001A
01-1M5827-00101
NAME OF PART
AMT.
Weldment – Rope Gasket .......................................................................................................... 1
Rope – Glass 3/4 In. Dia. ...........................................................................................................AR
Vent – Intake Lid ........................................................................................................................ 1
Vent – Motor Actuator Assy. ....................................................................................................... 1
Cover – Vent Bracket ................................................................................................................. 1
Protector – Thermocouple ......................................................................................................... 1
Kit – Thermocouple .................................................................................................................... 1
Bell – Inlet .................................................................................................................................. 1
Tape – Teflon 1/8 x 1 ..................................................................................................................AR
Cover – Blower Insulation (Machines Built Before 3/15/04) ...................................................... 1
Cover – Blower Insulation (Machines Built On or After 3/15/04)................................................ 1
Liner – Blower Insulation ........................................................................................................... 1
Motor – Blower (3 Ph., 11/2 Hp.) ................................................................................................. 1
Motor – Blower (1 Ph., 2 Hp.) .................................................................................................... 1
Clamp – Conduit 1/2 .................................................................................................................... 2
Mount – Blower Motor................................................................................................................ 1
Heat Slinger Assy. ...................................................................................................................... 1
Cover – Blower Insulation .......................................................................................................... 1
Insulation – Blower .................................................................................................................... 1
Weldment – Blower Mount ......................................................................................................... 1
Wheel – Blower (15 In. Dia.) ...................................................................................................... 1
Ring – Snap ............................................................................................................................... 1
Z-Bar (Pressure Panel) .............................................................................................................. 1
Wall – Inner Pressure Panel ...................................................................................................... 1
Retainer – Pressure Panel Side Wall......................................................................................... 2
Retainer – Pressure Panel Bottom Wall .................................................................................... 2
Shutter – Pressure Panel 97 Deg. ............................................................................................. 6
Body – Pressure Panel Shutter Support .................................................................................... 1
Shutter – Pressure Panel 90 Deg. ............................................................................................. 6
Duct – Bottom Vent .................................................................................................................... 1
Panel – Suction.......................................................................................................................... 1
Bracket – Mounting (Suction Panel) .......................................................................................... 1
Side – Duct Insulation Cover ..................................................................................................... 1
Duct – Vent ................................................................................................................................ 1
Body – Duct Insulation Cover .................................................................................................... 1
Top – Duct Insulation Cover....................................................................................................... 1
Blower Assy. (3 Ph.) (Incls. Items 6, 7, 10 thru 13, & 15 thru 22) .............................................. 1
Blower Assy. (1 Ph.) (Incls. Items 6, 7, 10 thru 12, & 14 thru 22) .............................................. 1
Vent Switch – Replacement Kit.................................................................................................. 1
Bracket – Vent Switch ................................................................................................................ 1
* Sold Per Inch
- 31 -
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
13
6
7
14
3
2
1
4
15
8
5
9
16-17
10
11
19
18
20
12
21
22
23
44
43
24
25
46
45
37-38
35
33-34
PREVIOUS
CONSTRUCTION
29
26
30
27
31
41-42
36
39
PL-57928
32
40
BLOWER, PANELS, AND VENTS (ML-132280)
F-43070 Rev. C (June 2008)
- 32 -
28
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
BLOWER, PANELS, AND VENTS (ML-132280)
ILLUS.
PL-57928
1
2
3
4
*5
6
7
8
9
10
*11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
PART NO.
01-1M5015-00003
01-1M5015-00002
01-1M5015-00004
01-1M5015-00001
01-100V21-00072
01-1M5834-00001
01-1M5514-00002
01-1M5101-00001
01-1M1433-00001
01-1A1828-00001
01-100V21-00058
01-1M2451-00002
01-1M1895-00001
01-1M2227-00001
01-1M5027-00001
01-1000V8-00052
01-1000V8-00067
01-100V11-00073
01-1M1360-00001
01-1M2458-00001
01-1M1794-00001
01-1M1795-00001
01-1M5026-00001
01-1000V8-00058
01-1000V1-00028
01-1M2579-00001
01-1M2560-00002
01-1M2560-00001
01-1M5686-00207
01-1M2572-00001
01-1M5686-00206
01-1M5686-00205
01-1M3117-00001
01-1000V4-00020
01-1M2096-00002
01-1M5176-00001
01-1M2557-00002
01-1M2557-00001
01-1M2566-00001
01-1M2089-00001
01-1M5050-00001
01-1M5935-00002
01-1M2223-00001
01-1M2224-00001
01-1M2074-00001
01-1M2222-00001
01-1M5025-00001
01-1M5025-00002
01-1M5177-00001
01-100V16-00682
01-1M5827-0001A
01-1M5827-00101
NAME OF PART
AMT.
Retainer – Exhaust Stack Packing ............................................................................................ 1
Retainer – Exhaust Stack Packing ............................................................................................ 1
Retainer – Exhaust Stack Packing ............................................................................................ 1
Retainer – Exhaust Stack Packing ............................................................................................ 1
Rope – Glass 3/4 In. Dia. ...........................................................................................................AR
Vent – Intake Lid ........................................................................................................................ 1
Vent – Motor Actuator Assy. ....................................................................................................... 1
Cover – Vent Bracket ................................................................................................................. 1
Protector – Thermocouple ......................................................................................................... 1
Kit – Thermocouple .................................................................................................................... 1
Tape – Teflon 1/8 x 1 ..................................................................................................................AR
Bell – Inlet .................................................................................................................................. 1
Cover – Blower Insulation .......................................................................................................... 2
Liner – Blower Insulation Cover ................................................................................................. 2
Cover – Blower Insulation .......................................................................................................... 1
Motor – Blower (3 Ph., 11/2 Hp.) ................................................................................................. 1
Motor – Blower (1 Ph., 2 Hp.) .................................................................................................... 1
Clamp – Conduit 1/2 ................................................................................................................. 2
Mount – Blower Motor................................................................................................................ 1
Heat Slinger Assy. ...................................................................................................................... 1
Cover – Blower Insulation .......................................................................................................... 1
Insulation – Blower .................................................................................................................... 1
Weldment – Blower Mount ......................................................................................................... 1
Wheel – Blower (18 In. Dia.) ...................................................................................................... 1
Ring – Snap .............................................................................................................................. 1
Wall – Inner Pressure Panel (Previous Construction)................................................................ 1
Retainer – Pressure Panel Side Wall (Previous Construction) .................................................. 2
Retainer – Pressure Panel Bottom Wall (Previous Construction) .............................................. 1
Retainer – Pressure Panel Top .................................................................................................. 1
Screen – Pressure Panel ........................................................................................................... 1
Retainer – Pressure Panel ......................................................................................................... 2
Retainer – Pressure Panel ......................................................................................................... 1
Shutter – Pressure Panel 97 Deg. ............................................................................................. 6
Insert – Threaded 1/4-20 ............................................................................................................ 24
Body – Pressure Panel Shutter Support .................................................................................... 1
Shutter – Pressure Panel 90 Deg. ............................................................................................. 6
Guide – Pressure Panel Air (RH) (Previous Construction) ........................................................ 1
Guide – Pressure Panel Air (LH) (Previous Construction) ......................................................... 1
Duct – Side ................................................................................................................................ 1
Duct – Bottom Vent .................................................................................................................... 1
Panel – Suction (Machines Built Before 4/25/07) ...................................................................... 1
Panel – Suction (Machines Built On or After 4/25/07) (Starting Serial #24-1045072) ............... 1
Body – Duct Insulation Cover .................................................................................................... 1
Top – Duct Insulation Cover....................................................................................................... 1
Duct – Vent ................................................................................................................................ 1
Side – Duct Insulation Cover ..................................................................................................... 1
Blower Assy. (3 Ph.) (Incls. Items 9, 10, 15, 16, & 18 thru 25) .................................................. 1
Blower Assy. (1 Ph.) (Incls. Items 9, 10, 15, & 17 thru 25)......................................................... 1
Pressure Panel Assy. (Incls. Items 33 thru 36) .......................................................................... 1
Gasket – Vent Duct .................................................................................................................... 1
Kit – Vent Switch Replacement.................................................................................................. 1
Bracket – Vent Switch ................................................................................................................ 1
* Sold Per Inch
- 33 -
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
2
9
1
11
3
4-5
6
12
13
7
14
8
15
PL-57962
10
16
DRAFT INDUCER (ML-132358)
(PREVIOUS CONSTRUCTION BEFORE 7/26/05)
ILLUS.
PL-57962
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PART NO.
01-1M5499-00001
01-100V11-0024A
01-1000V8-00120
01-1M5581-00002
01-1000V5-00059
01-1000V8-00099
01-1M5508-00001
01-1M3001-00003
01-1M5509-00001
01-1000V8-00121
FP-078-49
01-100V17-00004
01-1000V1-00018
01-1A1023-00425
01-1000V1-00018
01-1M5651-00013
01-1M5654-00001
01-1000V8-00122
F-43070 Rev. C (June 2008)
NAME OF PART
AMT.
Shroud – Motor Draft Inducer .................................................................................................... 1
Box ............................................................................................................................................. 1
Blade – Fan (41/2 In. Dia.) .......................................................................................................... 1
Motor (3000 RPM) ..................................................................................................................... 1
Bushing – Snap (Plastic) ........................................................................................................... 1
Blade – Fan (2 In. Dia.).............................................................................................................. 1
Plate – Motor Draft Inducer........................................................................................................ 1
Spacer ....................................................................................................................................... 1
Baffle – Draft Inducer ................................................................................................................. 1
Blade – Fan (61/2 In. Dia.) .......................................................................................................... 1
Fitting – Tube (1/4 In.) (Brass) ..................................................................................................... 1
Tube – 1/4 O.D. ..........................................................................................................................AR
Clamp – Hose 1/4 I.D. x 7/16 O.D. ................................................................................................ 1
Tube – Black (Neopene) ............................................................................................................ 1
Clamp – Hose 1/4 I.D. x 7/16 O.D. ................................................................................................ 1
Switch – Pressure ...................................................................................................................... 1
Inducer – Draft Assy. .................................................................................................................. 1
Guard – Fan............................................................................................................................... 1
- 34 -
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
12
11
10
9
7
6
8
5
4
3
2
PL-57963
1
DRAFT INDUCER (ML-132280)
(PREVIOUS CONSTRUCTION BEFORE 8/1/05)
ILLUS.
PL-57963
1
2
3
4
5
6
7
8
9
10
11
12
PART NO.
01-1M5651-00011
01-1000V1-00018
01-1A1023-00425
01-1000V1-00018
01-100V17-00004
FP-078-49
01-1M5157-00001
01-1000V8-00113
01-1000V4-00220
NS-046-51
01-1000V8-00099
01-1000V8-0098B
01-1M5156-00001
NAME OF PART
AMT.
Switch – Pressure ...................................................................................................................... 1
Clamp – Hose 1/4 I.D. x 7/16 O.D. ................................................................................................ 1
Tube – Black (Neopene) ............................................................................................................ 1
Clamp – Hose 1/4 I.D. x 7/16 O.D. ................................................................................................ 1
Tube – 1/4 O.D. ..........................................................................................................................AR
Fitting – Tube (1/4 In.) (Brass) ..................................................................................................... 1
Draft Inducer Weldment ............................................................................................................. 1
Blade – Fan 8 In. Dia. ................................................................................................................ 1
Nut – Coupler 8-32 x 5/8 ............................................................................................................. 4
Nut 8-32 ..................................................................................................................................... 4
Blade – Fan 2 In. Dia. ................................................................................................................ 1
Motor – Venter (3000 RPM W/J-Box) ........................................................................................ 1
Draft Inducer Assy. (Incls. Items 7 thru 12) ................................................................................ 1
- 35 -
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
11
1
12-13
9-10
15
2
3
4
5
6
16
7-8
14
PL-58741
17 THRU 20
DRAFT INDUCER (CURRENT CONSTRUCTION)
(ML-132358 ON OR AFTER 7/26/05 & ML-132280 ON OR AFTER 8/1/05)
F-43070 Rev. C (June 2008)
- 36 -
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
DRAFT INDUCER (CURRENT CONSTRUCTION)
(ML-132358 ON OR AFTER 7/26/05 & ML-132280 ON OR AFTER 8/1/05)
ILLUS.
PL-58741
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
*16
17
18
19
PART NO.
NAME OF PART
AMT.
01-1000V8-00133
01-1000V5-00220
01-1M3001-00003
01-1M5653-00001
01-1M5655-00001
01-1M5655-00002
01-1M5657-00001
01-1M5657-00002
01-1M5656-00001
01-1M5656-00002
01-1000V8-00121
FP-078-49
01-100V17-00004
01-1M5973-00001
01-1M5651-00018
01-1M5651-00022
01-1M5507-00001
01-1M5652-00002
Motor – Fan (3000 RPM) (Units Built On or After 2/01/08) ........................................................ 1
Mach. Screw 10-32 x 3/8 Phil. Truss Hd., Type 1........................................................................ 3
Lockwasher #10 Internal Tooth, Type A ..................................................................................... 3
Bushing – Spacer ...................................................................................................................... 3
Spacer 10-32 x 3/4 ...................................................................................................................... 3
Plate – Draft Inducer Fan Mounting ........................................................................................... 1
Box – Draft Inducer (ML-132358) .............................................................................................. 1
Box – Draft Inducer (ML-132280) .............................................................................................. 1
Damper – Draft Inducer (ML-132358) ........................................................................................ 1
Damper – Draft Inducer (ML-132280) ........................................................................................ 1
Screw 10-32 x 5/8 Hex Washer Hd. (SST) .................................................................................. 1
Cover Assy. – Draft Inducer (ML-132358).................................................................................. 1
Cover Assy. – Draft Inducer (ML-132280).................................................................................. 1
Blade – Fan ............................................................................................................................... 1
Fitting – Tube (1/4 In.) (Brass) ..................................................................................................... 1
Tube – Alum. (1/4 O.D.) ..............................................................................................................AR
Switch – Pressure (180 kBTU, 60 Hz.) (300 kBTU, 50/60 Hz.) ................................................. 1
Switch – Pressure (180 kBTU, 50 Hz.) (ML-132358) ................................................................ 1
Switch – Pressure (350 kBTU, 60 Hz.) (ML-132280) ................................................................ 1
Hood – Connector ...................................................................................................................... 1
Motor Assy. – Draft Inducer (Incls. Items 1 & 6)
(All Double Machines Built Before 2/01/08) ............................................................................... 1
01-1M5654-00001 Draft Inducer Assy. (Incls. Items 1 thru 7, 9, 11, 12, & 14) (ML-132358) ................................... 1
01-1M5654-00002 Draft Inducer Assy. (Incls. Items 1 thru 6, 8, 10, 11, 13, & 14) (ML-132280) ............................. 1
* Sold Per Inch.
- 37 -
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
54
52
53
50
55
56
51
47-48-49
1
57
46
43
3
45
2
44
42
41
39-40
4
5
38
9-10
37
11
12
6-7-8
34
35-36
33
15
16
13-14
17
58
18
32
30
29
19 THRU 26
31
PL-57828
28
27
LIFTER AND ROTATOR
ILLUS.
PL-57828
1
2
3
4
5
PART NO.
01-1M2418-00001
01-1M2289-00001
01-1000V1-00037
01-1M2304-00001
01-1M2290-00001
F-43070 Rev. C (June 2008)
NAME OF PART
AMT.
Linear Actuator – Modified ......................................................................................................... 1
Angle – Linear Actuator Support ................................................................................................ 2
Ring – Snap 1/2 In. Dia. .............................................................................................................. 2
Arm ............................................................................................................................................ 1
Shaft – Pivot (Linear Actuator Support) ..................................................................................... 1
- 38 -
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
LIFTER AND ROTATOR (CONT.)
ILLUS.
PL-57828
*6
*7
*8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
PART NO.
01-1M2766-00003
01-1M2766-00002
01-1M2766-00001
01-1M2298-00001
01-1M2298-00002
01-1M2730-00001
01-1M2731-00001
01-1M2797-00001
01-1M4865-00001
01-1M2140-00001
01-1000V0-00055
01-1M1899-00001
01-100V15-00048
01-1M5363-00001
01-1M2796-00001
01-1M2796-00002
01-1M4862-00002
01-1M4862-00001
01-1M4862-00003
01-1M4862-00007
01-1M4862-00006
01-1000V1-00004
01-1000V1-00013
01-1M2580-00002
01-1000V6-00223
01-1M2765-00001
01-1000V6-00065
01-1000V5-00073
01-1000V6-00070
01-1M2296-00001
01-1M2296-00002
01-1000V6-00065
01-1000V0-00051
01-1000V3-00088
01-1000V3-0087A
01-1000V0-00054
01-1000V0-00068
01-1M2228-00001
01-1000V3-00105
01-1M2489-00001
01-1M2114-00001
01-1000V8-00111
01-1000V8-00110
01-1000V8-0049D
01-1000V8-00113
01-1M1927-00001
01-1M5085-00001
01-1000V6-00001
01-1M5201-00001
01-1000V1-00004
01-1M2264-00001
01-1M2265-00001
01-1000V4-00199
01-1M5133-00001
01-1M5133-00002
01-1M5037-00001
01-1000V5-00023
01-1000V5-00015
01-1000V5-00014
01-1M2750-00001
01-1M2751-00002
01-1M2752-00001
NAME OF PART
AMT.
Shim (24 Ga. Steel) ..................................................................................................................AR
Shim (24 Ga. Steel) ..................................................................................................................AR
Shim (16 Ga. Steel) ..................................................................................................................AR
Weldment – Lifter (ML-132358) ................................................................................................. 1
Weldment – Lifter (ML-132280) ................................................................................................. 1
Plate........................................................................................................................................... 1
Strip ........................................................................................................................................... 1
Shaft (Standard 28.35 - 28.41) .................................................................................................. 1
Shaft – Short (26.85 - 26.91) (C Lift) (Canada Only) ................................................................. 1
Housing – Rotator Shaft ............................................................................................................ 1
Bearing – Rotator Shaft ............................................................................................................. 2
Clamp – Rotator Housing .......................................................................................................... 1
Plug – Nickel Plated (For 0.75 Hole) ......................................................................................... 1
Rack – Carrier (A Style) (ML-132280) ....................................................................................... 1
Rack – Carrier (B Style) (Incls. Items 25 & 26) (ML-132358) .................................................... 1
Rack – Carrier (B Style) (Incls. Items 25 & 26) (ML-132280) .................................................... 1
Rack – Carrier (C Style) (ML-132358) ....................................................................................... 1
Rack – Carrier (C Style) (ML-132280) ....................................................................................... 1
Rack – Carrier (C Style) (Canada Only) .................................................................................... 1
Lift – Carrier (Panera) (ML-132280) .......................................................................................... 1
Lift – Carrier (C Style) ................................................................................................................ 1
Ring – Snap (11/2 In.).................................................................................................................. 1
Collar – Set 1/2 In. Dia. ............................................................................................................... 1
Stop – Rack Carrier (B Style Carrier) ........................................................................................ 1
Switch – Lever DPST................................................................................................................. 1
Rod – Door Switch Actuator Pivot.............................................................................................. 1
Micro-Switch .............................................................................................................................. 1
Bushing – Snap 1/5 In. Dia. ......................................................................................................... 1
Relay .......................................................................................................................................... 1
Bracket – Micro-Switch (A Style) (ML-132280) .......................................................................... 1
Bracket – Micro-Switch (B & C Style) ........................................................................................ 1
Micro-Switch .............................................................................................................................. 1
Bushing – Spherical ................................................................................................................... 1
Link – Connecting ...................................................................................................................... 1
Chain – Roller 201/8 In. ............................................................................................................... 1
Bearing – Flanged ..................................................................................................................... 1
Washer – Thrust ........................................................................................................................ 1
Sprocket..................................................................................................................................... 1
Sprocket (17T) ........................................................................................................................... 1
Actuator – Micro-Switch ............................................................................................................. 1
Rotator – Weldment ................................................................................................................... 1
Capacitor ................................................................................................................................... 1
Gear Motor ................................................................................................................................. 1
Bracket – Mounting .................................................................................................................... 1
Blade – Fan 8 In. Dia. ................................................................................................................ 1
Plate – Teflon ............................................................................................................................. 1
Plate – Rotator ........................................................................................................................... 1
Micro-Switch .............................................................................................................................. 1
Pointer ....................................................................................................................................... 1
Ring – Snap (11/2 In.).................................................................................................................. 1
Collar – Set ................................................................................................................................ 1
Clutch – Slide............................................................................................................................. 1
Set Screw 3/8-24 x 3/8 Allen Hd. .................................................................................................. 1
Lifter Assy. (Incls. Items 1 thru 5, 10, 11, 12, 30, & 32 thru 35) (ML-132280) ............................ 1
Lifter Assy. (Incls. Items 1 thru 5, 9, 11, 12, 30, 32, 33, 34, & 36) (ML-132358) ........................ 1
Harness – Lifter ......................................................................................................................... 1
Pad – Mounting .......................................................................................................................... 6
Nut – Wire .................................................................................................................................. 3
Tie – Cable................................................................................................................................. 6
Side – Lifter Cover ..................................................................................................................... 2
Front – Lifter Cover .................................................................................................................... 1
Back – Lifter Cover .................................................................................................................... 1
*This part used intermittently and in varying quantities. Most lifter assemblies will not require
this part, but a few will require one. A very few will require more than one.
- 39 -
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
1
2
3
4
10
8
6-7
9
5
PL-57829
STEAMER ASSEMBLY (ML-132358)
ILLUS.
PL-57829
1
2
3
4
5
6
7
8
9
10
PART NO.
01-1M5198-00001
01-100V16-00529
01-1M5475-00001
01-1M5474-00001
01-1M5065-00001
01-1M5064-00001
01-1M5068-00001
01-1M5536-00001
01-1M5469-00001
01-1M5470-00001
01-100V17-00536
F-43070 Rev. C (June 2008)
NAME OF PART
AMT.
Box Weldment – Steamer .......................................................................................................... 1
Casting – Steamer .................................................................................................................... 15
Sheet – Splash .......................................................................................................................... 1
Panel – Steamer ........................................................................................................................ 1
Bracket – Water Guide............................................................................................................... 7
Pan – Drain ................................................................................................................................ 1
Plate – Mounting (Drain Pan) .................................................................................................... 1
Support – Steamer Castings...................................................................................................... 2
Panel – Heat Exchanger ............................................................................................................ 1
Baffle .......................................................................................................................................... 4
Nozzle – Spray 3/8 In. Pipe ......................................................................................................... 1
- 40 -
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
2
1
4
3
5
6
7-8
13
14
9-10-11
15-16
12
PL-57830
STEAMER ASSEMBLY (ML-132280)
ILLUS.
PL-57830
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PART NO.
01-1M5146-00001
01-100V17-00286
01-1M5171-00001
01-1M5198-00001
01-100V16-00529
01-1M5067-00001
01-1M5051-00001
01-1M5937-00002
01-1M5064-00001
01-1M5510-00001
01-1M5068-00001
01-1M5065-00001
01-1M5171-00002
01-1M5939-00002
01-1M5049-00001
01-1M5936-00002
NAME OF PART
AMT.
Manifold Assy. – Steamer (Incls. Item 2).................................................................................... 1
Union 1/2 In. Dia. NPT................................................................................................................. 1
Angle – Shutter Casting (Top Section)....................................................................................... 1
Box Weldment – Steamer .......................................................................................................... 1
Casting – Steamer .................................................................................................................... 30
Sheet – Splash .......................................................................................................................... 1
Panel – Steamer (Machines Built Before 4/25/07)..................................................................... 1
Panel – Streamer Outer (Machines Built On or After 4/25/07) (Starting Serial #24-1045072) .. 1
Pan – Drain ................................................................................................................................ 1
Gasket (8 In.) ............................................................................................................................. 1
Plate – Mounting (Drain Pan) .................................................................................................... 1
Bracket – Water Guide.............................................................................................................. 15
Angle – Shutter Casting (Side Section) (Machines Built Before 4/25/07) .................................. 1
Angle – Shutter Casting (Machines Built On or After 4/25/07)................................................... 1
Panel – Steamer (Rear) (Machines Built Before 4/25/07) ......................................................... 1
Panel – Streamer (Rear) Machines Built On or After 4/25/07) (Starting Serial #24-1045072) .. 1
- 41 -
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
1 THRU 5
6
12
7
8
11
13
14
9
10
15 THRU 18
PL-57989
GAS BURNER AND HEAT CIRCULATION (ML-132358)
F-43070 Rev. C (June 2008)
- 42 -
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
GAS BURNER AND HEAT CIRCULATION (ML-132358)
ILLUS.
PL-57989
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART NO.
01-1M5477-00001
01-100V16-00530
01-100V21-00065
00-542133
01-100V16-00593
01-1M5466-00001
01-1M5467-00001
01-1000V9-00149
01-1M5464-00001
01-1000V9-00169
01-1M5465-00001
01-1000V9-00146
01-1000V9-00150
01-1M5468-00001
01-100V16-00610
01-1000V9-00174
01-100V16-00618
01-1000V9-00175
01-1M5478-00001
01-1M5463-00001
01-1M5649-00001
NAME OF PART
AMT.
Heat Exchanger Tube Assy. (Incls. Items 2 thru 5) .................................................................... 3
Gasket – Heat Exchanger.......................................................................................................... 2
Tape – Fiberglass .....................................................................................................................AR
Sealer .......................................................................................................................................AR
Tube Assy. – Weldment (6-Tube)............................................................................................... 1
Angle Rack – Burner.................................................................................................................. 1
Plate – Firing (Burner Rack) ...................................................................................................... 1
Ignitor – Hot Surface .................................................................................................................. 1
Plate – Side (Burner Rack) ........................................................................................................ 1
Rod – Flame Sensor .................................................................................................................. 1
Mount – Burner .......................................................................................................................... 1
Burner – In-Shot (Crossover).................................................................................................... 18
Switch – Flame Rollout (350 F.) ................................................................................................. 1
Enclosure – Burner Rack ........................................................................................................... 1
Manifold Assy. (NAT).................................................................................................................. 1
Orifice #53 (0.059 In.) (NAT) ...................................................................................................... 1
Manifold Assy. (LP) .................................................................................................................... 1
Orifice #63 (0.037 In.) (LP) ........................................................................................................ 1
Strip – Turbulator (First Pass) .................................................................................................... 1
Box – Burner Assy. (Incls. Items 7, 9, 11, 12, & 14) ................................................................... 1
Ignition Kit – Service .................................................................................................................. 1
- 43 -
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
1 THRU 5
6
9
16
8
15
17
11
7
10
14
12
13
18-19-20
PL-57990
GAS BURNER AND HEAT CIRCULATION (ML-132280)
F-43070 Rev. C (June 2008)
- 44 -
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
GAS BURNER AND HEAT CIRCULATION (ML-132280)
ILLUS.
PL-57990
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
*
*
PART NO.
01-1M5001-00001
01-100V16-00559
01-100V16-00530
01-100V21-00065
00-542133
01-1M5028-00002
01-1M5028-00001
01-1M5046-00001
01-1M5045-00001
01-1M5045-00002
01-1000V9-00149
01-1M5043-00001
01-1000V9-00169
01-1M5594-00001
01-1000V9-00146
01-1M5061-00001
01-1000V9-00150
01-100V16-0556A
01-1000V9-00171
01-100V16-0556B
01-1M5047-00001
01-1M5200-00001
01-1M5016-00001
01-1M5002-00001
01-1M5002-00002
01-1M6035-00002
NAME OF PART
AMT.
Kit – Double Tubs (No Collector) ............................................................................................... 1
Gasket – Heat Exchanger.......................................................................................................... 4
Gasket – Heat Exchanger.......................................................................................................... 4
Tape – Fiberglass .....................................................................................................................AR
Sealer .......................................................................................................................................AR
Tube Assy. – Weldment (6-Tube)............................................................................................... 2
Tube Assy. – Weldment (5-Tube)............................................................................................... 2
Angle Rack – Burner.................................................................................................................. 1
Plate – Firing (Burner Rack) ...................................................................................................... 2
Plate – Firing (Burner Rack) ...................................................................................................... 2
Ignitor – Hot Surface .................................................................................................................. 1
Plate – Side (Burner Rack) ........................................................................................................ 1
Rod – Flame Sensor .................................................................................................................. 1
Mount – Burner (3)..................................................................................................................... 2
Burner – In-Shot (Crossover).................................................................................................... 22
Enclosure – Burner Rack ........................................................................................................... 1
Switch – Flame Roll-Out (350 F.) ............................................................................................... 1
Manifold Assy. (NAT).................................................................................................................. 1
Orifice #49 (0.073 In.) (NAT) ...................................................................................................... 1
Manifold Assy. (LP) .................................................................................................................... 1
Plate Assy. – Burner (Incls. Items 11 thru 15) ............................................................................ 1
Plate – Burner Spacer ............................................................................................................... 1
Strip – Turbulator (Heat Exchanger) .......................................................................................... 1
Collector – Weldment (Machines Built Before 1/01/08) ............................................................. 1
Collector – Weldment (Machines Built Before 1/01/08) ............................................................. 1
Collector – Weldment (Machines Built On or After 1/01/08) ...................................................... 1
*Machines built before 1/01/08 must order both items.
- 45 -
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
6
1
2
7
3
PREVIOUS
CONSTRUCTION
4
5
8
9
12
10
11
15
16
13-14
17-18-19
20
CURRENT
CONSTRUCTION
21
22
PL-57832
EXTERIOR WATER SUPPLY
F-43070 Rev. C (June 2008)
- 46 -
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
EXTERIOR WATER SUPPLY
ILLUS.
PL-57832
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
PART NO.
01-100V17-00322
01-100V17-00274
01-100V17-00288
01-100V17-00330
01-100V17-00288
01-100V17-00204
01-100V17-00229
01-100V17-00312
01-100V17-00288
01-100V17-00286
01-100V17-00322
01-100V17-00322
01-1M5818-00102
01-1M5818-00101
01-100V17-00274
01-100V17-00288
01-100V17-00567
01-100V17-00568
01-100V17-00569
01-100V17-00570
01-100V17-00286
01-100V17-00322
01-1M5818-00001
01-1M5818-00002
01-1M5818-00003
NAME OF PART
AMT.
Ell 1/2 Street (Brass) ................................................................................................................... 1
Valve – Solenoid – Water (2-Way) (120 V.)................................................................................ 1
Nipple ½ Dia. Close (Brass) ...................................................................................................... 1
Regulator – Water Pressure 1/2 NPTF (10-70 PSI) .................................................................... 1
Nipple 1/2 Dia. Close (Brass) ...................................................................................................... 1
Gauge – Pressure (100 PSI) ..................................................................................................... 1
Bushing 1/2 NPT x 1/4 NPT (Brass).............................................................................................. 1
Tee 1/2 NPT (Brass) .................................................................................................................... 1
Nipple 1/2 Dia. Close (Brass) ...................................................................................................... 1
Union 1/2 Dia. NPT (Brass) ......................................................................................................... 1
Ell 1/2 Street (Brass) ................................................................................................................... 1
Ell 1/2 Street (Brass) ................................................................................................................... 1
Bracket – Water Supply Support (Single Rack) ......................................................................... 1
Bracket – Water Supply Support (Double Rack)........................................................................ 1
Valve – Solenoid – Water (2-Way) (120 V.)................................................................................ 1
Nipple ½ Dia. Close (Brass) ...................................................................................................... 1
Regulator – Flow 1/2 NPTF (2 G.P.M.) ........................................................................................ 1
Regulator – Flow 1/2 NPTF (3 G.P.M.) ........................................................................................ 1
Regulator – Flow 1/2 NPTF (5 G.P.M.) ........................................................................................ 1
Nipple 1/2 In. Dia. x 6 In. (Brass)................................................................................................. 1
Union 1/2 Dia. NPT (Brass) ......................................................................................................... 1
Ell 1/2 Street (Brass) ................................................................................................................... 1
Water Supply (2 G.P.M.) (Single Rack Ovens) .......................................................................... 1
Water Supply (3 G.P.M.) (Double Rack Ovens) ......................................................................... 1
Water Supply (5 G.P.M.) (Panera Ovens) .................................................................................. 1
- 47 -
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
10
11
12
9
13
14
8
7
6
5
4
3
1-2
MANIFOLD
PL-57833
GAS SUPPLY PLUMBING
F-43070 Rev. C (June 2008)
- 48 -
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
GAS SUPPLY PLUMBING
ILLUS.
PL-57833
1
2
3
4
5
6
7
8
9
10
11
12
13
14
PART NO.
01-1000V9-00181
01-100V17-00429
01-100V17-00446
01-100V17-00470
01-100V17-00446
01-100V17-00513
01-100V17-00446
01-100V17-00169
01-100V17-00446
01-100V17-00467
01-10A982-02300
01-100V17-00451
01-10A982-00400
01-100V17-00472
01-1000V9-00127
01-1M5506-00001
01-1M5505-00002
NAME OF PART
AMT.
Valve – Gas................................................................................................................................ 1
Bushing – Reducer (3/4 to 1/2) ..................................................................................................... 1
Pipe – Close 3/4 NPT .................................................................................................................. 1
Union 3/4 NPT BLK #150 ............................................................................................................ 1
Pipe – Close 3/4 NPT .................................................................................................................. 1
Elbow 90 Deg. 3/4 Rd.................................................................................................................. 1
Pipe – Close 3/4 NPT .................................................................................................................. 1
Valve – Gas Cock 3/4 NPT .......................................................................................................... 1
Pipe – Close 3/4 NPT .................................................................................................................. 1
Bell Reducer 11/4 x 3/4 In. (NAT) .................................................................................................. 1
Pipe 3/4 In. Dia. ........................................................................................................................... 1
Tee 3/4 NPT x 3/4 NPT ................................................................................................................. 1
Pipe 3/4 Dia. X 4 In. Lg................................................................................................................ 1
Cap – Pipe 3/4 ............................................................................................................................. 1
Valve Kit – LP Conversion ......................................................................................................... 1
Gas Supply (NAT) ...................................................................................................................... 1
Gas Supply (LP) ........................................................................................................................ 1
- 49 -
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
1
2
3
4
5
8
9
10
11
6-7
12
PL-57929
VENTING
F-43070 Rev. C (June 2008)
- 50 -
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
VENTING
ILLUS.
PL-57929
1
2
3
4
5
6
7
8
9
10
11
12
PART NO.
01-100V17-00004
FP-078-49
01-1M5695-00002
01-1M5695-00001
01-1M5172-00001
01-1000V1-00018
01-1A1023-00425
01-1000V1-00018
01-1M2824-00001
01-1000V9-00172
01-1M5507-00001
01-1M5696-00002
01-1M5170-00001
01-1M5164-00001
NAME OF PART
AMT.
Tube – 1/4 In. O.D (Alum.) 10 Ft. ................................................................................................ 1
Fitting – Tube (1/4 In.) (Brass) ..................................................................................................... 1
Screw ......................................................................................................................................... 4
Screw ......................................................................................................................................... 3
Screw ......................................................................................................................................... 2
Outlet – Exhaust Weldment ....................................................................................................... 1
Outlet – Exhaust Assy. ............................................................................................................... 1
Baffle Weldment – Exhaust........................................................................................................ 1
Clamp – Hose 1/4 I.D. x 7/16 O.D. ................................................................................................ 1
Tube – Black (Neopene) ............................................................................................................ 1
Clamp – Hose 1/4 I.D. x 7/16 O.D. ................................................................................................ 1
Switch – Pressure ...................................................................................................................... 1
Elbow (7 In., 26 Ga.) (90 Deg.) .................................................................................................. 1
Hood Connection Weldment ...................................................................................................... 1
Kit – Exhaust Outlet (ML-132280) ............................................................................................. 1
Cover – Insulation Clamp (ML-132280) ..................................................................................... 1
Hood – Connection Weldment (ML-132280) ............................................................................. 1
- 51 -
F-43070 Rev. C (June 2008)
HBA SERIES GAS RACK OVEN REPLACEMENT PARTS
FORM 43070 Rev. C
JUNE 2008
PRINTED IN U.S.A.
Online Parts Catalog
User Guide
Note: It is helpful, but not essential to know
the ML (Material List) Number of the
equipment for which a part is needed
Section 1 – If Equipment ML Number is known
Section 2 – If Equipment ML Number is not known
User Guide
From
hobartservice.com
select
PARTS
Next
select
SMARTPARTS
Web Browser Pop-up blocker must be turned off for this site in order for SmartParts to operate
If the ML Number of
the Equipment is
known,
select
Use SmartParts Now
(We’ll explain what to
do if the ML number of
the Equipment is not
known in Section 2)
Enter the ML number
and click on
Search SmartParts
104352
For this example, the part needed is a Water
Pressure Gauge used on the LX 30 Undercounter
Dishwasher
104352
The ML number of this dishwasher is 104352
Section 1 – If Equipment ML Number is known
This is SmartParts
home page
•
Then click on
Continue
The Water Pressure Gauge is
on the Base Assembly
Select Base Assembly
Then click on Continue
Section 1 – If Equipment ML Number is known
Click on the
Radio button
to select the
Parts Catalog
Select an appropriate figure size
Locate the part needed (Water
Pressure Gauge) on the drawing
19: Gauge – Water Pressure (LX30/40, LXG, & LXiG Series)
Placing the cursor on the number
will display the Description of the
Part
Click on the number pointing to
the part
Section 1 – If Equipment ML Number is known
•
Selecting the part on the figure causes the part to be highlighted on the parts list
•
Click on the Add button to add the part to the shopping cart
•
You can add more parts or change the quantity of the parts already in the cart
•
When finished, click on the Confirm Parts Selected and then on Print Parts List if
you want to print
Use SMARTPARTS Now
Section 1 – If Equipment ML Number is known
•
This (again) is SmartParts
home page
If the ML Number of the
Equipment is not known,
click on the Radio button
to select Warewash /
Waste Equipment
Then click on Continue
(Go to Section 1 if you do know
the ML number of the
Equipment)
Click on the Radio button
to select UnderCounter
Dishwasher
Then click on
Continue
Section 2 – If Equipment ML Number is not known
For this example, the part
needed is a Water
Pressure Gauge used on
the LX 30 Undercounter
Dishwasher
Then click on
Continue
The Water Pressure Gauge
is on the Base Assembly
Select Base Assembly
Then click on Continue
Section 2 – If Equipment ML Number is not known
Click on the Radio button
to select LX Series
Dishwashers
Locate the part needed (Water
Pressure Gauge) on the
drawing
19: Gauge – Water Pressure (LX30/40, LXG, & LXiG Series)
Placing the cursor on the
number will display the
Description of the Part
Click on the number pointing to
the part
Section 2 – If Equipment ML Number is not known
Select an appropriate figure size
Selecting the part on the figure causes the part to be highlighted on the parts list
•
Click on the Add button to add the part to the shopping cart
•
You can add more parts or change the quantity of the parts already in the cart
•
When finished, click on the Confirm Parts Selected and then on Print Parts List if
you want to print
Use SMARTPARTS Now
Section 2 – If Equipment ML Number is not known
•
HBA2G RACK OVEN
JUNE 2008
PRODUCT SERVICE DEPARTMENT
TROY, OH. 45374-0001
RECOMMENDED SPARE PARTS LIST
HBA2G
RACK OVEN (GAS)
Qty
Part Number
Description
1
01-100V16-545A
Control Membrane - HBA Standard Control
1
01-100V16-546A
Control Membrane - HBA Advanced Control
1
01-100V16-565
Control Board - Advanced
1
01-100V16-590
Control Board - Standard Plus 01-100V16-565
1
01-1A1828-1
Thermocouple
1
01-100V10-223
Beeper Assembly
1
01-1000V6-65
Micro Switch - Door/ Rack Height (Long Arm)
1
01-1000V6-1
Micro Switch - Home Position (Short Arm)
1
01-1000V6-223
Door Switch, DPST
1
01-1000V6-118
High Limit
1
01-1000V8-109
Steam Vent Motor
1
01-1000V3-105
Drive Sprocket
1
01-1M2228-1
Driven Sprocket
1
01-1M2265-1
Clutch Disk
1
01-1000V3-87A
Drive Chain
1
01-1000V3-88
Connecting Link
1
01-1000V8-110
Rotate Motor
1
01-1M2418-1
Linear Actuator w/Brake Kit
1
01-1000V6-70
Control Relay – 120V Coil
1
01-1000V8-98B
Draft Inducer Motor - Before 8/1/05 w/5 Wires
1
01-1000V8-127
Draft Inducer Motor - After 8/1/05 w/2 Wires
1
01-1000V17-274
Water Solenoid Valve
1
01-1M2824-1
Pressure Switch - Hood
1
01-1000V9-170
Fenwal Ignition Control (3 Trial)
1
01-1000V9-149
Hot Surface Igniter
1
01-1000V9-169
Flame Sense Rod
1
01-1000V9-181
Gas Valve
1
01-1M5651-29
Draft Switch - New Style - Used w/2 Wire Motor - Single/Double Rack
1
01-1M5651-11
Draft Switch - Old Style - Used w/5 Wire Motor - Double Rack Only
Page 1 of 1
HBA2G Rack Oven
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising