MCM Electronics | HDMI V1.4 Over Cat5e Extender | MCM Electronics HDMI V1.4 Over Cat5e Extender null

1
Audio/Video
A/V Distribution
Audio Video Baluns
Wireless HDMI
Transceiver Kit
Utilizing the latest
in wireless HDMI
technology, this HDMI
transceiver kit allows you
to send 1080p HDMI
1.3 signals at distances
up to 100' (even through
walls), and is ideal in a
conference room, home
theater, classroom, or any
installation where running
a cable is not feasible.
Integrated IR receiver
and included IR emitter allow remote
control of connected component. Features:
•Utilizes the latest WHDI transmission
standard •Transmits uncompressed 1080p video and
digital audio data at rates up to 3Gbps •Less than
1ms latency •Utilizes 5GHz wireless band for reliable,
interference free operation •HDCP 2.0 compliant
•128bit encryption •Required power: 5V, 3A (adapters
included) Includes: •Transmitter •Receiver •IR emitter
•Two AC adapters
MCM Part #
33-10530
HDMI Over Cat5e Balun Set
Active sender/receiver set allows HDMI signals to
be carried over two runs of Cat5e cable at distances
of up to 180'. Additionally, this set provides a path
for IR signals, allowing control of source gear from
the remote location. Features: •Meets HDMI V1.4
standards, including 3D •Fully HDCP compliant
•Cable skew adjustment •Compatible with 38KHz
and 56KHz IR systems •1080i/60Hz up to 180'
•1080p/60Hz up to 98' •Needs power source only at
receiver end •Includes IR target and dual head emitters
•Requires 12VDC, 500mA, AC adapter included
MCM Part #
33-12570
ONLY
$79.99
HDMI 1.3 Balun Set
4IR and RS232 support
Capable of transmitting video signals at resolutions up
to 1080p up to 328', this balun set also accepts input
from an infrared receiver and transmits the signal via
the same CAT5e/6 cable. Features: •Can also transmit
RS-232 (DB9 connections) up to 115.2kbps •3D ready
•Bi-directional RS232 and IR signals •Maximum data
rate: 3.4Gbps •Audio transmission supports Dolby
TrueHD, DTS-HD MA •Mfr. #HM1CK-3
MCM Part #
33-11200
ONLY
$519.12
ONLY
$249.00
HDMI Wall Plate Balun
Set with IR Support
HDMI/Ethernet Extender Set
HDMI Over Cat5
Extender Set
Active HDMI balun allows full HD audio and video
to be transmitted over a single Cat5e or Cat6 cable,
up to 160'. It is ideal for situations requiring long
HDMI cable runs, or retrofit applications where
Cat5 cable may already exist. Features: •HDMI 1.2a
compliant •Supports 24 bit Deep Color and 1080p
resolution •Auto equalization •Rugged metal housing
with gold plated connectors •Dimensions (each unit):
1" (H) x 2.5" (W) x 3.9" (D) •Requires 5VDC,
two AC adapters included •Sold as a set
MCM Part #
50-15000
ONLY
$79.99
HDBaseT extender set consists of a transmitter and
receiver that will allow full 1080p and 3D HDMI
signal to be sent up to 300' over a single run of Cat5e
or Cat6 cable. It also provides an IR path that supports
38KHz IR control and 100Mbps Ethernet to be sent as
well, all over the same single cable. Features: •HDMI
1.4 and HDCP compliant, supports 3D •Compatible
with all digital audio formats •Remote mount IR
emitter included •Acts as an Ethernet hub •Four
Ethernet ports, two on receiver, two on transmitter,
any of which can be used as the input •Requires 5VDC
at each end, two AC adapters included
MCM Part #
33-12550
ONLY
$249.00
The UBW-HDMI balun
system is specifically
designed to transmit
an HDMI signal at
resolutions up to 1080p via two Cat
5e or Cat 6 wires up to 80'. System also
features an included infrared receiver
and emitter, allowing IR transmission via
the same Cat 5e or Cat 6 cables. Features: •HDCP
compliant •Supports HDMI 1.2 •White decora style
wall plates •Supported resolutions: 480i/p, 576i/p, 720p
and 1080i/p •Infrared receiver and emitter included.
•Powered by the HDMI system •Optional 5 VDC
power supply is supported (2.1mm DC power input)
in rare instances the connecting device cannot supply
enough power •LED status indicators •Audio support:
Dolby True HD, Dolby Digital Plus, DTS HD Master
Audio, & DTS HD High Resolution
MCM Part #
33-11260
ONLY
$119.00
HDMI Extender Kit
Complete set allows HDMI signals to be sent up
to 50 meters, over two CAT5e cable runs. Features:
•Transmits 1080i resolution up to 50m, and 1080p
resolution up to 30m •Dip switch digital level and EQ
adjustments •Rugged metal housing •Weight: 1.4lbs.
•Mfr. #HM6EK
Includes everything you need to connect HDMI
equipment at distances up to 330' at 1080p deep
color via a single CAT5e/6 cable, and also receives
and transmits an IR signal Kit includes: •Transmitter,
receiver, 12VDC power supplies, IR emitter and IR
receiver •Mfr. #500450
The VideoEase
Econo Plus extender kit
allows HDMI equipment
to be connected up to 150' via two Cat5e unshielded
twisted pair cables at 1080p resolution, and supports
1080p deep color up to 90' via dual Cat6 cable.
Transmission lengths: •1080p: 150' via dual Cat5e, 200'
via dual Cat6 •1080i/720p: 200' via dual Cat5e, 250' via
dual Cat6 •Mfr. #500401
MCM Part #
33-11050
MCM Part #
33-11250
MCM Part #
33-10576
HDMI 1.3 Balun Set
with IR Support
HDMI Active Balun Set
76
ONLY
$207.03
ONLY
$425.00
www.MCMelectronics.com /1-800-543-4330
ONLY
$219.00
Follow us on:
&
1
A/V Distribution
Audio/Video
#33-12410
#33-12400
Active HDMI
Extender Balun II Kit
These items allow HDMI equipment to be connected
at distances up to 300' via two Cat5E/6 cables with
up to 1080i resolution, or 1080p deep color up to 150'.
It is ideal for digital signage, residential, boardroom,
classroom, and medical imaging video systems.
Complete kit includes transmitter, receiver and power
supply, IR target and emitter. Items sold individually
to support use with other components and hubs.
MCM Part #
33-11445
33-11450
33-11455
33-11485
Mfr. #
500405
500406
500407
500999
Type
Complete kit
Transmitter
Receiver
IR receiver
(1–3)
(4–up)
$389.00 $369.55
185.00 175.75
209.00 198.55
21.19
20.13
Back
Active HDMI
Extender Set
Back
HDMI 1x2 Splitter/Cat5 Extender Set
HDMI extender sets consist of a transmitter and
receiver that will allow full 1080p and 3D HDMI signal
to be sent up to 164' over two runs of Cat 5e cable.
Additionally, this set provides an IR path that supports
38KHz IR control to be sent as well. Features: •HDCP
compliant, supports 3D, 4K x 2K •Distance extends
to 180' with Cat 6 cable •Compatible with 7.1 and all
digital audio formats •5VDC required at receiver end
only, AC adapter included •Available in free standing
and wall plate versions •IR target and emitter sold
separately
MCM Part #
33-12400
33-12410
50-14615
50-14616
Description
Free standing set
Wall plate set
IR emitter
IR target
ONLY
$129.00
139.00
9.50
9.50
Complete set consists of one HDMI to Cat5
transmitter, and two Cat5 to HDMI receivers,
allowoing a single source to send high definition
video up to 160' to two video monitors. Features:
•HDMI 1.2a compliant •Supports 24 bit Deep
Color and 1080p resolution •Auto equalization
•Rugged metal housing with gold plated connectors
•Dimensions (transmitter): 1" (H) x 4.0" (W) x 3.9"
(D) •Dimensions (each receiver): 1" (H) x 2.5" (W) x
3.9" (D) •Requires 5VDC, three AC adapters included
•Sold as a set of one transmitter and two receivers
MCM Part #
50-15005
ONLY
$119.00
HDMI 3 x 1 Switcher and Extension Kit
The HDMI 3 x 1 switcher kit allows up to three
different HDMI sources to be connected to one
HDMI display via two Cat 5e unshielded twisted-pair
cables in a point-to-point configuration. Push-button
input selection is located on the receiver unit. The
kit includes one transmitter and one receiver, and
supports up to 100' (30m) at 1080p via Cat 5e cable
(supports deep color up to 1080i). Mfr. #500410.
MCM Part #
33-10580
ONLY
$365.00
#33-12415
#33-12405
HDMI 1x4 Splitter/
Cat5 Extender Set
Complete set consists
of one HDMI to
Cat5 transmitter, and
four Cat5 to HDMI
receivers, allowoing
a single source to
send high definition
video up to 160’ to four
video monitors. Features: •HDMI 1.2a
compliant •Supports 24 bit Deep Color and 1080p
resolution •Auto equalization •Rugged metal housing
with gold plated connectors •Dimensions (transmitter):
1.6" (H) x 10.6"(W) x 7.1" (D) •Dimensions (each
receiver): 1" (H) x 2.5" (W) x 3.9" (D) •Requires
5VDC, five AC adapters included •Sold as a set of one
transmitter and four receivers
MCM Part #
50-15010
Back
ONLY
$179.00
HDMI 1x8 Splitter/Cat5 Extender Set
Complete set consists of one HDMI to Cat5
transmitter, and eight Cat5 to HDMI receivers,
allowoing a single source to send high definition video
up to 160' to eight video monitors. Features: •HDMI
1.2a compliant •Supports 24 bit deep color and 1080p
resolution •Auto equalization •Rugged metal housing
with gold plated connectors •Dimensions (transmitter):
1.8" (H) x 17.3" (W) x 7.9" (D) •Dimensions (each
receiver): 1" (H) x 2.5" (W) x 3.9" (D) •Requires
5VDC, nine AC adapters included •Sold as a set of
one transmitter and eight receivers
MCM Part #
50-15015
ONLY
$299.00
Back
HDMI Extender Set
HDMI extender sets consist of a transmitter and
receiver that will allow full 1080p and 3D HDMI
signal to be sent up to 100' over two runs of Cat
6 cable. Additionally, this set provides an IR path
that supports 38KHz IR control to be sent as well.
Features: •HDCP compliant, supports 3D, 4K x 2K
•Compatible with 7.1 and all digital audio formats •No
external power required •Available in free standing
and wall plate versions •IR target and emitter sold
separately
MCM Part #
33-12405
33-12415
50-14615
50-14616
Description
Free standing set
Wall plate set
IR emitter
IR target
ONLY
$89.99
99.99
9.50
9.50
HDMI Category 5 Cable Extender Kit
HDMI Repeater/Extender
HDMI extender utilizes two Cat 5e or Cat 6 cables
to extend an HDMI signal to distances up to 100'.
Features: •Supports up to 1080p resolution •Supports
24bit deep color •Supports uncompressed LPCM
audio •DTS and Dolby® Digital support •HDMI 1.2a
compliant •HDCP pass through •Passive device, no
power supply required
Provides improved reliablity of HD signal transfer
on long distances of HDMI cable. Features: •Locate
at receiver end of the cable •Extends up to 100' total
distance •Fully plug and play •Supports resolutions
up to 1080p •Dimensions: 0.6" (H) x 1.9" (W)
x 1.1" (D) •Powered from HDMI signal cable,
no external power required
MCM Part #
33-11640
MCM Part #
33-12725
ONLY
$39.99
www.MCMelectronics.com /1-800-543-4330
ONLY
$17.99
77
1
Audio/Video
A/V Distribution
Audio Video Baluns
VideoEase™
HDTV
Component
Video/Digital
Audio Balun
VideoEase™ Component
Video /IR Pass-Thru Balun
Component Audio/Video Balun
•Allows one component video signal and one stereo
audio channel to be transmitted via one Cat5E/6
cable •Supports 480p resolution up to 1,000'
•Supports 720p/1080i/1080p resolution up to 500'
•6" pigtails •Supports RCA L/R stereo audio
•Note: Sold individually, must be used in pairs
•Mfr #500058
MCM Part #
33-11025
ONLY
$115.00
These baluns send Y/Pb/Pr component video signals
over Cat5E/6 cable up to 500' for 1080i and 1,000' for
480p. Additionally, screw terminal connections are
provided, allowing access to one Cat5 pair for passing
IR signals. Models are available with female RCA
connectors, or male RCA's on 6" pigtails. •Baluns
must be used in pairs and are sold individually
MCM Part # Mfr. #
33-11370 500054
Type
Female RCA's
(1–3) (4–up)
$68.99 $65.54
Component Video Plus
Audio Wall Plate Balun
Component Video/Stereo
Audio Balun Pair
Used in pairs, the component video/stereo audio
balun supports high-definition resolution and true
left/right stereo audio for hi-fidelity commercial and
residential AV applications. Features: •Component
video 480i/p, 720p, 1080i/p. Stereo line level analog
audio. •Max. distance –Cat 5E/6: 480i/p: 1,000' 720p
and 1080i/p: 500' •Video:Three RCA-M connectors
w/6" leads•Audio: Two RCA-F connectors •Sold
as a pair •Mfr. #500058-2PK
MCM Part #
33-11026
Identical to and interchangeable with
model 500058 balun, this model fits
in a single gang box and is compatible
with decora style wall plates. Sends
Y/Pb/Pr component video plus two
channels of line level audio over
standard CAT5e/6 cable. Maximum
range is 1,000' for 480i, 500' for 1080i.
•Mfr. #500058-WP-US •Used in pairs, sold individually
MCM Part #
33-11515
•High-definition balun transformer •Distributes
component video signals with PCM digital audio over
Cat 5 UTP •300'~1000' •Custom designed with wide
bandwidth •Can be used for four composite video
signals •Rugged metal chassis •Mfr. #C5-HDP
MCM Part #
33-11052
VideoEase™ Component/Composite Video
Balun
78
Connectors
Male RCA Female RCA
Male RCA
Female RCA
Audio
Digital
Digital
Analog
Analog
ONLY
$68.99
68.99
68.99
68.99
#33-10255
#33-10256
4Accommodates component video
(Y/Pb/Pr) plus digital audio
4Active video amplifier circuit
4Loop through output send for multiple receivers
4IR remote path
Passive Component Video Balun
Transformer with Digital Audio
Type
(1–3) (4–up)
Female RCA's
$68.99 $65.54
Male RCA pigtails 68.99 65.54
Mfr. #
500050
500051
500052
500053
HDTV Audio/Video
Distribution Hub and Receiver
Back
MCM Part # Mfr. #
33-11380 500056
33-11385 500057
MCM Part #
33-10060
33-10061
33-10062
33-10063
ONLY
$135.00
ONLY
$205.00
These baluns send Y/Pb/Pr component video, plus one
composite video signal over Cat5E/6 cable up to 500'
for 1080i and 1,000' for 480p. It is ideal when multiple
video sources, such as a digital cable box and old style
video game, are located remotely from the viewing
monitor. Models are available with female RCA
connectors, or male RCA's on 6" pigtails. •Baluns
must be used in pairs and are sold individually
The component
video/audio
balun allows one component video
(YPbPr or RGB) signal and one
audio signal to be transmitted via
Back
cost-effective unshielded twisted
pair (UTP) cable in a point-to-point configuration.
Used in pairs, the component digital balun supports
480i/p, 720p and 1080i/p video formats for hidefinition (HDTV) video applications. Features:
•Supports 480i/p up to 1000' (305m) and 720p/1080i/p
up to 500' (152m) via Cat 5 UTP, respectively
•Available with color-coded RCA cable connectors
•Supports either digital audio (5000050, or 500051),
or analog audio (500052, or 500053) on fourth
twisted pair •Modular shielded RJ-45 connector
•Sold separately, must be used in pairs
ONLY
$49.94
Distribute high-definition component video and digital
or left or right audio over extended distances using Cat
5e wire. Video and audio loop output to accommodate
future expansion to additional Cat 5e transmitters and
receivers. Supports 1080i video up to 300' with Cat 6.
MCM Part #
33-10255
33-10256
Mfr. #
Cat5TX
Cat5RX
Description
Transmitter
Receiver
ONLY
$104.03
120.51
VideoEase™ Component Video Balun
The VideoEase™ Component Video Balun allows a single component
video signal (Y, Pb, or Pr) to be transmitted via cost-effective
unshielded twisted pair (UTP) cable. Features and benefits: •Supports
one component of the YPbPr video signal •Three balun pairs required
per YPbPr connection •Up to 1,000' (305m) via Cat 5 UTP •Goldplated connector •Cable strain relief •Compact design •Lifetime
warranty •Design patent pending
MCM Part #
33-9755
Mfr. #
500021
www.MCMelectronics.com /1-800-543-4330
ONLY
$23.99
Follow us on:
&
1
A/V Distribution
Audio/Video
Tramsmitter
Component Video Balun
4Accommodates component
video (Y/Pb/Pr)
4Female red/green/blue
RCA connections
4400' max distance
Front
#50-10255
Use to send Y/Pb/Pr
component video signals over
Cat 5 cable. This balun features
three gold plated female RCA
connectors, color coded red,
green and blue, and a single
female RJ-45 jack. Utilizes
three Cat 5 cable pairs: •Red:
Pin 7/8 •Green: Pin 3/6 •Blue: Pin 1/2. Specifications:
•Bandwidth: 50Hz~8MHz •Dimensions (excluding
connectors): 1.0" (H) x 3.2" (W) x 2.4" (L) •Sold
individually, must be used in pairs
MCM Part #
50-7720
(1–3)
$22.89
(4–up)
$21.79
Component Video
Plus Digital Audio
Balun Wall Plate
Use to send Y/Pb/Pr
component video signal
up to 1080i, plus digital
audio over a single
Cat 5 cable. This balun
mounts in a standard
single gang opening
and is compatible with
standard decora style wall plates. It
Back
utilizes four RCA female jacks color
coded red, blue, green and orange on the front, with
a female RJ-45 jack on the rear. Sold individually,
all baluns must be used in pairs, and may be used in
conjunction with MCM balun models #50-7722 and
50-7720. Place one balun at each end of a Cat 5 cable
up to 400' in length. Utilizes four Cat 5 cable pairs:
•Red: Pin 7/8 •Green: Pin 3/6 •Blue: Pin 1/2 •SPDIF:
Pin 4/5
MCM Part #
50-10295
(1-3)
$44.79
Receiver
Back
Back
Active VGA Balun II Kit
#50-10265
#50-10270
#50-10250
VGA Balun Series
4Interchangeable wall plate and stand alone models
4Accommodates VGA signals
4Range up to 450' depending upon resolution
Ideal when computer monitor or other high-resolution
video signal needs to be sent long distances. Cable
runs are greatly eased by the use of smaller, lower cost
Cat 5 UTP cable. These are perfect for installation
of multimedia systems in educational environments,
boardrooms and public areas. All units consist of an
HD-15 connector for connection to the PC or monitor,
and a female RJ-45 for connection to the UTP cable.
Four different configurations are available, allowing a
wide variety of installation possibilities. Distance (Cat
5): •VGA (640 x 480): 450' •SVGA (800 x 600): 350'
•XGA (1024 x 768): 250' •SXGA (1280 x 1024): 200'
Note: Baluns are sold individually and must be used in
pairs. A pair must include one PC side balun and one
monitor side balun.
MCM
VGA
Part #
Type
Side Connector
50-10250 In-line
PC
Male
50-10255 In-line
Monitor Female
50-10265 Wall plate PC
Female
50-10270 Wall plate Monitor Female
(1-3)
$34.99
34.99
34.99
34.99
(4-up)
$30.49
30.49
30.49
30.49
(4-up)
$40.27
Complete two piece kit allows VGA video, plus stereo
or digital audio and RS232 to be transmitted via a
single Cat 5e/6 cable. It is DDC compliant and works
in conjunction with separately available IR emitter and
sensors to support IR source control. Resolution up to
1920 x 1200 is supported at distances up to 600', and
manual brightness, sharpness and skew adjustments
are provided. Full ground loop isolation is also
provided between transmitter and receiver. In addition
to the Cat 5e output, the transmitter also provides
local monitor connection.
MCM Part # Model
33-11425 500145
33-11485 500999
Type
(1–3)
Complete kit $699.00
IR sensor
21.19
(4–up)
$664.05
20.13
Videoease Active VGA Balun Kit
•Extends the distance between the computer system
unit and a remote display monitor by up to 480'
•It accomplishes this by means of a local transmitting
unit, and remote receiving unit, connected by
standard Cat 5 twisted pair ethernet cable Features:
•Uses Cat 5 ethernet cable: For economy; easy
installation; and utmost data transfer reliability
•High-resolution video: Up to 1800 x 1440 at 100
meters •Supports VGA and SVGA monitors •Long
distance transmission, up to 160m (480') •Local unit
includes port for local monitor •Mfr. #500035
MCM Part #
33-10120
ONLY
$295.00
VGA Over Cat5 Distribution System
VGA Balun Sets
VGA balun sets are
capable of transmitting a video signal at distances up
to 600', with a maximum resolution of 1280x1024.
Features: •Rugged metal housing •Adjustable signal
gain •Compatible
with CAT5e or CAT6 •VGA loopthrough
provides convenient local video simultaneously
with the long distance video(#33-12090 only)
MCM Part #
Mfr. #
Balun Set
33-12085
VG5EK
Balun Set with VGA Loopthrough
33-12090
VG5EKL
ONLY
$179.00
170.00
Complete product group allows transmission and
distribution of VGA video, and stereo audio, to
multiple monitors. each up to 1,000' from the source.
Sold separately, you can choose a two, four or eight
output video sender, then simply purchase the exact
number of receivers needed for each monitor. Features:
•Supports up to 1920x1200 resolution •VGA loopthrough output on the sender •Adjustable brightness
and skew •3.5mm jack accommodates stereo audio
•AC adapter included with each sender and receiver
MCM Part #
50-15020
50-15025
50-15030
50-15035
Description
Sender – 1x2 splitter
Sender – 1x4 splitter
Sender – 1x8 splitter
Individual receiver
ONLY
$49.99
59.99
99.99
39.99
VGA Balun Pair
VGA Baluns eliminates costly and bulky VGA cable,
allowing a VGA source to be connected to a VGA
monitor via 4-pair Cat5e/6 twisted pair cable. VGA
Baluns are not symmetrical, and require a separate
VGA and Monitor side. In order to ensure a commons
signal ground, shielded twisted pair (STP) is required.
VGA: 640x480 pixels (15MHz) 450' (137m) SXGA:
1280x1024 pixels (100MHz) 200' (61m) SVGA:
800x600 pixels (30MHz) 350' (107m) WXGA:1366x768
pixels 180' (55m) XGA: 1024x768 pixels (60MHz) 250'
(76m)
MCM Part #
33-12851
33-12852
33-12850
Model
500010
500014
500010-14-PK
www.MCMelectronics.com /1-800-543-4330
End
PC
Monitor
Pair
ONLY
$69.99
69.99
125.00
79
1
Audio/Video
A/V Distribution
Audio Video Baluns
VideoEase™
Audio Balun
A
Active VGA Managed
Distribution
The Active VGA Managed Dispatcher Hub
(500170/171) distributes one VGA and one stereo
audio channel via Cat5e/6 to up to eight or sixteen
displays depending on the model. Designed for digital
signage applications, the 500170 works in conjunction
with the active VGA managed receiver (500174) to
support Cat5e/6 cable. Additionally the active VGA
managed repeater hub (500172) may be cascaded for
increased distance. The overall system allows RS232
commands to be sent to remote displays. Features:
•Distributes VGA/Audio to up to 8 or 16 displays Up
to 1,000' •Gain/skew adjustment via manual, RS232,
USB •GUI software controls gain, sharpness, skew
•Local VGA and audio output
B
VGA and Audio Balun
This active VGA/Audio balun allows VGA and stereo
or digital audio to be transmitted via CAT5e/CAT6
cable. The product also supports RS232, is DDC
compliant and supports IR source control. Features:
•Transmits signal up to 600' @ 1920 x 1200 •Supports
analog stereo or coaxial digital audio •Supports
RS232 or IR control •Brightness, sharpness and skew
adjustments •Local VGA/Audio output
•Ground loop isolation
Fig.
A
B
MCM Part #
33-11220
33-11221
Mfr. #
500146
500147
Description
Transmitter
Receiver
ONLY
$339.00
419.00
MCM Part #
33-12890
33-12892
33-12894
33-12892
Mfr. #
500170
500171
500172
500174
Discription
ONLY
8 Port Dispatcher $699.00
16 Port Dispatcher 899.00
8 Port Repeater Hub 749.00
Managed Receiver 699.00
The VideoEase™
Audio Balun
allows any
unbalanced analog audio signal to be transmitted via
a single unshielded twisted pair (UTP) cable for
more versatile cabling. Used in pairs, the audio balun
eliminates costly and bulky coax cable, allowing
consumer and commercial audio equipment to be
connected using standard premises wiring techniques.
One or two pair of baluns are required depending
on whether the application is for monaural or stereo
audio. The audio balun features screw terminals and
built-in cable strain relief for ease of installation
and reliable connectivity. Applications include
auditoriums, arenas, schools, home theater systems,
airports, hotels, hospitals, conference rooms. Features
and benefits: •Eliminates coax cable •Up to 5,000'
(1.5km) via Cat 5 UTP •20~20KHz bandwidth
•Gold-plated RCA connector •Cable strain relief
•Compact design •Lifetime warranty •Design patent
pending •Mfr. #500019
MCM Part #
33-9745
ONLY
$23.99
Videoease™ Quad
Audio Balun
VGA 4 x 1 Switcher
Compact switcher allows a single display to select
from up to four VGA sources, when Muxlab baluns
are utilized, At the Cat 5e/6 cable. It operates in
conjunction with Model 500140 active balun kit, and
Model 500141 transmitter. At least one 500140 is
required to support one source and one display, then
up to three additional 500141 transmitters may be
added. Features: •Auto and Manual switching modes
•Manual, IR, RS232 and USB control •Plug and play –
DDC1 compliant •Remote power up to 150' •Modular
RJ45 on output and each input •Supports up to 1920
x 1440, 1080p •Includes GUI software and IR remote
•Model #500160
MCM Part #
33-11430
(1–3)
$499.00
(4–up)
$474.05
VideoEase™ VGA Balun II Over UTP
VideoEase™ VGA Balun II is a passive device
that fully supports VGA and SVGA (RGBHV)
transmission via one Cat 5 UTP cable without the
need for shielded twisted pair (STP) cable. This
breakthrough technology allows VGA equipment to
be deployed more easily in both new and pre-wire
structured cabling environments. Sold individually,
must be used in pairs
MCM Part # Description
33-9601
PC side (HD15-male)
33-9602
Monitor side (HD15-female)
33-9603
Monitor side (HD15-male)
33-11355 PC side (HD15-female)
Mfr. #
ONLY
500040 $68.99
500041 68.99
500042 68.99
500043 68.99
VGA Wall Plate Baluns
Interchangeable with VGA balun models 500040/41/42/43, these units fit in a
single gang box and are compatible with decora style wall plates. Sends VGA
video over standard CAT5e/6 cable at distances up to 350'. •Baluns must be used
in a pair consisting of one PC side, and one monitor side balun.
MCM Part #
33-11495
33-11500
Mfr. #
500041-WP-US
500043-WP-US
Type
Monitor side
PC side
ONLY
$89.99
89.99
The quad audio
balun allows up to
four analog line audio
signals to be transmitted
via unshielded twisted pair
cable in a point-to-point
connection. One pair of quad audio baluns can
replace four coax audio cables with one Cat 5 cable.
Features: •Unbalanced, line-level analog audio up to
5,000' via Cat 5 cable •Less than 1dB per pair over
frequency range. Mfr. #500033. Used in pairs, sold
individually.
MCM Part #
33-10115
ONLY
$56.99
Quad Audio Wall Balun
Used in pairs, the Quad Audio
Wall Balun allows up to four
coax audio cables to be replaced
by one Cat5e/6 cable. The Quad
Audio Balun also works in
conjunction with other MuxLab
analog audio baluns such as the
500019. Note: Baluns must be
used in pairs; this unit is sold
individually. Features: •Four
unbalanced line-level
analog audio signals •Max.
distance /W Cat 5E/6 UTP/STP:
3250' (1 km) •White decora
mount •Mfr. #500033-WP-US
MCM Part #
33-10116
80
www.MCMelectronics.com /1-800-543-4330
ONLY
$74.99
Follow us on:
&
1
A/V Distribution
VideoEase™
MonoPro™ XLR
The MonoPro™
XLR connectors
allow a standard
AES analog or digital
audio channel to be
#33-10055
connected via Cat 5
unshielded twisted pair
cable (UTP) in the professional audio environment.
The product features rugged cable strain relief and
comes with locking XLR3 connectors for added
cabling versatility. Features: •Rugged cable strain relief
•Line analog audio up to 5,000' (1.5km) via Cat 5
•Digital audio up to 1,400' (426m) via Cat 5 •Wires
terminate inside product •Locking XLR3 connector
•Optional wire terminal for ground/shield (if required)
•Up to 5,000' and 1,400' via Cat 5 for analog or digital
audio, respectively.
MCM Part # Mfr. #
33-10050
500025
33-10055
500026
Description
MonoPro™ XLR male
MonoPro™ XLR female
Audio/Video
Stereo A/V Wall
Plate Balun
Identical to and interchangeable
with model 500048 and 500049, this
balun fits in a single gang box and
is compatible with decora style wall
plates. Sends composite video plus
full spectrum L/R line level audio
over standard CAT5e/6 cable. Screw
terminals provide access to the fourth
cable pair for pass-thru of IR signals.
Maximum range is 2,200'. •Mfr. #500049-WP-US
•Used in pairs, sold individually
MCM Part #
33-11505
ONLY
$75.99
Stereo
Hi-Fi Balun
Used in pairs, the stereo Hi-Fi balun
eliminates costly and bulky coaxial cable, allowing
audio equipment to be connected
or moved within a structured cabling environment.
Note: Baluns must be used in pairs Features:
•Line level unbalanced analogue audio •Max.
distance – Cat5e/6 UTP: 3,250' (1km)
•Connectors: Two RCA-M 6" cable leads
MCM Part # Mfr. #
Qty. Form Factor
33-11331 500028-2PK
Pair
Standard
33-11332 500028-WP-US Single Wall Plate
ONLY
$23.99
23.99
ONLY
$79.99
64.99
Coaxial Digital Audio Balun
Allows a digital audio signal to be transmitted up
to 600' via a single CAT5e/6 cable. •Mfr. #500020
•Used in pairs, sold individually
Stereo Audio Balun
Stereo Audio Balun
Allows line level stereo audio to be transmitted up
to 5000' via one CAT5e/6 cable. Features: •Up to 1000',
60Hz~20KHz •1000'~5000', 100Hz~20KHz •Less than
1dB loss •6" RCA leads •Dimensions: 1 7⁄8" (L) x 1"
(dia.) •Mfr. #500027 •Used in pairs, sold individually
MCM Part #
33-11240
Allows unbalanced line level stereo to be transmitted
up to 3250' via a single CAT5e/CAT6 cable.
•Mfr. #33-11330 •Used in pairs, sold individually
MCM Part #
33-11330
MCM Part #
33-11325
ONLY
$23.99
ONLY
$44.99
ONLY
$37.99
Back
50-10285
L/R Audio Balun Wall Plates
L/R Audio Balun
4Accommodates L/R line level audio
4Convenient pigtail leads
41,000' max distance
Allows unbalanced line level stereo to be transmitted
via CAT5e/6 cable up to 5000'. Features: •Ideal for
connection to sound cards, laptops, MP3 players, etc.
•Transmits up to 1000' at 60Hz~20KHz •Transmits
from 1000'~5000' at 100Hz~20KHz •Less than 1dB
loss •6" 3.5mm cable lead •Dimensions: 4 7⁄8" (L) x 1"
(dia.) •Mfr. #500030 •Used in pairs, sold individually
Use to send two channels of unbalanced line level
audio over Cat 5 cable. This balun features two 8"
pigtail leads, each terminated with gold plated male
RCA connectors, color coded red and white, and a
single female RJ-45 jack. Utilizes two Cat 5 cable
pairs: •Red: Pin 1/2 •White: Pin 3/6 Specifications:
•Bandwidth: 10Hz~50KHz •Distance: 1000' max
(Cat 5) •Dimensions (excluding cables): 0.85" (H)
x 1.69" (W) x 1.94" (L) •Sold individually,
must be used in pairs
MCM Part #
33-11245
MCM Part #
50-7724
Stereo Audio Balun
43.5mm plug
ONLY
$37.99
50-10287
(1-3)
$18.99
(4-up)
$18.09
Use to send two channels of line level audio signal over
Cat 5 cable. This balun mounts in a standard single
gang opening and is compatible with standard decora
style wall plates. They are available with either dual
RCA female or single 3.5mm stereo jacks on the front,
with a female RJ-45 jack on the rear. Sold individually,
all baluns must be used in pairs, and may be used in
conjunction with each other, or MCM balun models
#50-7724, 50-7725 and 50-7742. Place one balun at
each end of a Cat 5 cable up to 1000' in length. Utilizes
two Cat 5 cable pairs: •Red: Pin 1/2 •White: Pin 3/6
Specifications: •Bandwidth: 10Hz~50KHz •Distance:
1000' max, using 24AWG UTP
MCM Part #
50-10285
50-10287
Type
Red/white RCA
3.5mm stereo
www.MCMelectronics.com /1-800-543-4330
(1–3)
$19.99
19.99
(4–up)
$17.99
17.99
81
1
Audio/Video
A/V Distribution
Audio Video Baluns
L/R Audio Balun
Use to send
two channels of
unbalanced line
level audio over
Cat 5 cable. This balun
Back
features two gold plated
female RCA connectors, color coded red and white,
and a single female RJ-45 jack. Utilizes two Cat 5
cable pairs: •Red: Pin 1/2 •White: Pin 3/6.
Specifications: •Maximum distance: 1000' •Bandwidth:
10Hz~50KHz •Dimensions (excluding connectors):
0.85" (H) x 1.69" (W) x 1.94" (L)
MCM Part #
50-7725
(1–3)
$12.99
Stereo A/V Wall
Plate Balun
Composite Video
plus Audio Balun
with IR Pass Through
Allows one composite video,
R/L audio and one IR signal
to be transmitted via CAT5e/CAT6 cable. Features:
•Transmits audio up to 3250' with less than 2dB
loss •Transmits video up to 2200' with less than 2dB
loss •Screw terminal for IR emitter pass through
•Dimensions: 2 ½" (L) x 2 ¼" (W) x 1" (H)
•Used in pairs, sold individually
MCM Part #
Mfr. #
33-11231
500049
Description
Balun with RCA
connections
ONLY
$54.99
Identical to and interchangeable
with model 500048 and 500049, this
balun fits in a single gang box and
is compatible with decora style wall
plates. Sends composite video plus
full spectrum L/R line level audio
over standard CAT5e/6 cable. Screw
terminals provide access to the fourth
cable pair for pass-thru of IR signals.
Maximum range is 2,200'. •Mfr. #500049-WP-US
•Used in pairs, sold individually
MCM Part #
33-11505
ONLY
$75.99
(4–up)
$12.25
Back
L/R Audio/Video Balun
Keystone Audio Baluns
Intended to send line level audio signals over Cat 5
cable, these baluns are sold as individual red and white
units. Internally identical units feature RCA female
connectors with the appropriate color code insert,
for easy identification of left or right audio channel.
Rear mounted IDC connector allows simple, fast
connection to unterminated Cat 5 cable. Maximum
distance: 1000'. Sold individually.
MCM Part #
50-7760
50-7761
Color
Red
White
(1-3)
$10.99
10.99
(4-up)
$9.99
9.99
4Accommodates composite video
and L/R line level audio
4Female red/white/yellow RCA connections
41,000' max distance
Use to send composite video, plus two channels
of unbalanced line level audio over Cat 5 cable.
This balun features three gold plated female RCA
connectors, color coded red, white and yellow, and
a single female RJ-45 jack. Utilizes three Cat 5 cable
pairs: •Red: Pin 1/2 •White: Pin 3/6 •Yellow: Pin 7/8.
Specifications: •Video bandwidth: 50Hz~8MHz •Audio
bandwidth: 10Hz~50KHz •Dimensions (excluding
connectors): 1.0" (H) x 2.36" (W) x 3.22" (L) Sold
individually, must be used in pairs
MCM Part #
50-7730
Dual Audio/
Video Balun
The VideoEase
Dual Audio/Video
Balun allows up
to two composite
video signals
and up to two
unbalanced audio
signals to be
transmitted via unshielded twisted pair (UTP) cable
in a point-to-point connection. The Dual Audio/
Video Balun eliminates up to four coaxial cables,
allowing audio/video equipment to be connected via
space-efficient and cost-effective Cat 5 twisted pair
cable. The Dual Audio/Video Balun also works in
conjunction with MuxLab’s Audio/Video Distribution
Hub (500200) allowing audio/video programming to
be distributed via UTP to up to eight locations. Mfr.
#500012. Features: Up to 2200' (670m) in color via
Cat 5 UTP. Pair required for use, sold individually.
MCM Part #
33-9610
82
ONLY
$56.99
Dual A/V Balun
(1–3)
$21.49
MCM Part #
33-11310
ONLY
$56.99
(4–up)
$20.39
VideoEase™
Component
Video Balun
The VideoEase™ Component Video Balun allows
a single component video signal (Y, Pb, or Pr) to be
transmitted via cost-effective unshielded twisted pair
(UTP) cable. Three balun pairs are required for one
complete component (YPbPr) video connection. The
product allows three coaxial cables to be replaced
by one Cat 5 twisted pair cable, allowing standard
structured cabling techniques to be used for neater
and more streamlined cabling. The component video
balun is compact enough to allow three units to be
connected side by side on the back of the component
video equipment. Features and benefits: •Supports one
component of the YPbPr video signal •Three balun
pairs required per YPbPr connection •Up to 1,000'
(305m) via Cat 5 UTP •Gold-plated connector •Cable
strain relief •Compact design •Lifetime warranty
•Design patent pending •Mfr. #500021.
MCM Part #
33-9755
Allows up to two composite video signals and up to
two unbalanced audio signals to be transmitted up to
2200' via one CAT5e/6 cable. •Mfr. #500012 •Used in
pairs, sold individually
ONLY
$23.99
www.MCMelectronics.com /1-800-543-4330
L/R Audio/Video Balun
4Accommodates composite
video and L/R line level audio
4Convenient pigtail leads
41,000' max distance
Use to send composite video, plus two channels of
unbalanced line level audio over Cat 5 cable. This
balun features three 8" pigtails with gold plated male
RCA connectors, color coded red, white and yellow,
and a single female RJ-45 jack. Utilizes three Cat 5
cable pairs: •Red: Pin 1/2 •White: Pin 3/6 •Yellow: Pin
7/8 Specifications: •Video bandwidth: 50Hz~8MHz
•Audio bandwidth: 10Hz~50KHz •Distance: 1000'
max (Cat 5) •Dimensions (excluding connectors): 1.0"
(H) x 2.36" (W) x 3.22" (L) Sold individually, must be
used in pairs
MCM Part #
50-7732
(1-3)
$23.99
Follow us on:
(4-up)
$22.79
&
1
A/V Distribution
VideoEase™
Composite Video/
Stereo Balun
The VideoEase™
stereo/video balun
allows a single composite videosignal and stereo audio
signal to be transmitted via UTP cable up to 2,200'
in a point-to-point connection. Features: •Full audio
bandwidth response for high fidelity applications
•20Hz~20KHz audio bandwidth •Built-in color-coded
cable leads for ease of installation •Mfr. #500039 •Sold
individually, must be used in pairs
MCM Part #
33-9626
ONLY
$47.99
L/R Audio Video
Balun Wall Plate
Use to send two
channels of line level
audio, plus composite
video signal over a
single Cat 5 cable.
This balun mounts
in a standard single
gang opening and
is compatible with
standard decora style
wall plates. It utilizes
Back
three RCA female
jacks color coded
red, white and yellow on the front,
with a female RJ-45 jack on the
rear. Sold individually, all baluns must be used in pairs,
and may be used in conjunction with MCM balun
#50-7732 and 50-7730. Place one balun at each end of
a Cat 5 cable up to 1000’ in length. Utilizes three Cat 5
cable pairs: •Red: Pin 1/2 •White: Pin 3/6 •Yellow: Pin
7/8 Specifications: •Audio bandwidth: 10Hz~50KHz
•Video bandwidth: 50Hz~8MHz •Distance: 1000’ max,
using 24AWG UTP
MCM Part #
50-10290
(1–3)
$29.99
(4–up)
$26.99
L/R Audio Plus
S–Video Balun
Audio/Video
#33-9585
Front
4Accommodates S-video
and line level audio
4Seperate chroma
and luminance paths
4Accepts unterminated Cat 5 cable
41,000' max distance
Back
S-Video Baluns
Use to send S–video, plus two
channels of unbalanced line
level audio, over Cat 5 cable.
Independent balun circuits
provide separate paths
for chroma and luminance signals, and left and right
audio signals, utilizing four pairs of Cat 5 cable. This
balun features a female 4 pin S–video connector, two
gold plated female RCA connectors, color coded red
and white, and a female RJ-45 jack. Specifications:
•Pairs utilized: Luminance 7/8, Chroma, 4/5, Audio
(red) 1/2, •Audio (white) 3/6 •Video bandwidth:
DC~6MHz •Audio bandwidth: 10KHz~50KHz
•Dimensions (excluding connectors): 1.0" (H) x 2.36"
(W) x 3.22" (L) Sold individually, must be used in pairs
MCM Part #
50-7740
(1–3)
$29.99
(4–up)
$27.79
#33-9590
The VideoEase S-Video Balun allows a single S-video
signal to be transmitted via unshielded twisted pair
(UTP) cable up to 1000' (305m) in a point-to-point
connection. The product is available in two models;
the S-Video Balun (500016) and the S-Video/Audio
Balun (500017). Used in pairs, the S-Video Balun
eliminates costly and bulky S-video cable, allowing
S-video equipment to be connected or moved to
any convenient modular outlet. The S-Video Balun
also works in conjunction with MuxLab’s AudioVideo Distribution Hub (500200) to allow S-video
programming to be distributed via UTP. Some of
the applications are; classroom video distribution,
commercial and home audio/video systems, hospital
video training, video conferencing, and video kiosks.
Note: Baluns must be used in pairs and are sold
individually.
•Sold individually
MCM Part # Mfr. #
33-9585
500016
33-9590
500017
Description
ONLY
S-Video
$23.99
S-Video and Audio 54.99
#33-0001
#33-0003
Composite Video to S-Video Adapter
S-Video and Stereo Audio Balun
with Ground Loop Isolation
Allows one S-Video signal plus one stereo audio
signal to be transmitted up to 1000' feet via a single
CAT5e/6 cable, and provides a ground loop isolator
to eliminate any hums. •Mfr. #500018 •Must be used
in conjunction with #33-9590
MCM Part #
33-11320
This high-quality adapter converts composite video to
S–video and S–video to composite video. The adapter
measures only 13⁄4" long and 1⁄2" in diameter allowing
it to plug directly into the equipment and solves the
problems associated with mixing composite and
S–video inputs and outputs.
MCM Part # Description
33-0001
S male to RCA female
33-0003
S female to RCA male
(ea.)
$3.99
3.99
(2-up)
$3.69
3.69
ONLY
$61.99
Video Only Baluns
S–Video Balun
4Accommodates S-video
4Seperate chroma and
luminance paths
4Accepts unterminated Cat 5 cable
41,000' max distance
Back
Use to send S–video signal over
Cat 5 cable. Independent balun
circuits provide separate paths
for chroma and luminance signals,
Front
utilizing two pairs of Cat 5 cable.
This balun features a female 4 pin
S–video connector, and female RJ-45 jack. Utilizes pin
7/8 (luminance) and pin 4/5 (chroma). Specifications:
•Bandwidth: DC~6MHz •Dimensions: 1.19" (dia.) x
2" (L) Sold individually, must be used in pairs
MCM Part #
50-7735
(1–3)
$13.99
(4–up)
$12.99
BNC Video Balun Set
Allows up to two S-Video signals to be transmitted
up to 1000' via a single CAT5e/6 cable. •Mfr. #500013
•Used in pairs, sold individually
BNC balun set allows user to easily transmit video
from any security camera via CAT5e or CAT6 cable,
providing full-motion CCTV video at distances up
to 1000'. Features: •Passive device, no power required
•60dB crosstalk and noise immunity •Compact size
and easy installation •Built-in surge suppression
protection •Sold in pairs
MCM Part #
33-11315
MCM Part #
50-14510
Dual S-Video Balun
ONLY
$47.99
www.MCMelectronics.com /1-800-543-4330
ONLY
$5.69
83
1
Audio/Video
A/V Distribution
Video Only Baluns
Videoease
Quad Video
Balun
•Developed
for the security
video and audio-video markets, the quad video balun
allows up to four composite video channels to be
transmitted over one Cat 5 cable, thus replacing up
to four coaxial cables for more cost-efficient cabling
•Supporting composite video up to 2,200' (670m)
via Cat 5 cable and works in pairs •Streamlining
cabling in applications such as security video, videoconferencing, classroom instruction, tradeshow
demos, PC-training, airline information systems and
home entertainment systems •Mfr. #500032 •Used in
pairs, sold individually
MCM Part #
33-10110
Component Video/Stereo
Audio Balun Pair
Used in pairs, the component video/stereo audio
balun supports high-definition resolution and true
left/right stereo audio for hi-fidelity commercial and
residential AV applications. Features: •Component
video 480i/p, 720p, 1080i/p. Stereo line level analog
audio. •Max. distance –Cat 5E/6: 480i/p: 1,000' 720p
and 1080i/p: 500' •Video:Three RCA-M connectors
w/6" leads•Audio: Two RCA-F connectors •Sold
as a pair •Mfr. #500058-2PK
MCM Part #
33-11026
ONLY
$205.00
Composite Video Balun Pair
BNC balun set allows user to easily transmit video
from any security camera via CAT5e or CAT6 cable,
while passing 12V power to the camera, providing fullmotion CCTV video at distances up to 1000'. Features:
•60dB crosstalk and noise immunity •Compact size and
easy installation •Built-in surge suppression protection
•Sold in pairs
MCM Part #
50-14515
Passive balun is great for CCTV cameras and other
composite video applications. Push terminals allow
simple connection to unterminated Cat5 cable, and
male BNC connectors attach to equipment. Features:
•Suitable for distances up to 1,000' •Fully passive
devices, no power required •NTSC, PAL and SECAM
compatible •Sold in pairs
MCM Part #
50-14500
ONLY
$3.09
ONLY
$8.59
The VideoEase Audio-Video Hub allows up to two
baseband composite or one S-video signal and up
to two audio signals to be distributed to up to eight
destinations via twisted pair (UTP) cable for more
cost-effective and versatile cabling. The Audio-Video
Hub when used in conjunction with MuxLab’s line
of VideoEase baluns, allows coaxial cable to be
eliminated between the audio-video source and the
destinations. The product works with the CCTV
Baluns (500000, 500009), Stereo Audio-Video
Balun (500001), Dual Audio-Video Balun (500012)
and S-Video Baluns (500016, 500017). A looping
output allows the source input to be distributed to
other baseband audio/video equipment including
matrix switchers, multiplexers, VCRs and monitors.
Applications include: Classroom audio/video
instruction, corporate audio/video presentations,
tradeshow demonstration systems, CCTV security and
surveillance. Features: Up to 2200' in color via Cat 5
twisted pair cable. 2-year warranty. Mfr. #500200
MCM Part #
33-9615
84
ONLY
$549.00
Passive balun is great for CCTV cameras and other
composite video applications. Tooless IDC connector
allows simple, quick termination of unterminated Cat5
cable, and male BNC connectors attach to equipment.
Features: •Suitable for distances up to 1,000' •Fully
passive devices, no power required •NTSC, PAL
and SECAM compatible •Sold in pairs
MCM Part #
50-14505
ONLY
$899.00
VideoEase™ Passive Video
Balun Receiver Hub
This 16 port hub allows video, remote power and
PTZ control to be transmitted via one Cat 5 cable. It
features full DC isolation for systems where ground
loops may be present and works in conjunction with
all MuxLab CCTV baluns. Passive device, requires no
power.
MCM Part #
33-11415
82-9485
82-9490
33-10065
33-11390
Model
500133
500000
500009
500022
500100
Type
(1–3) (4–up)
16CH hub
$599.00 $569.05
Modular balun 16.59
15.76
Compact balun 16.59
15.76
PTZ balun
21.99
20.89
Active balun
82.99
78.84
PTZ Pass-Thru Balun
Composite Video Balun Pair
Audio/Video Hub
This hub allows video, remote power and PTZ control
to be transmitted via one Cat5e/6 cable between the
CCTV camera and the DVR/IP encoder in the security
video environment. Features: •Built-in 16-channel
CCTV power supply •24/28VAC selector for each port
•Power-thru or pass-thru mode port configuration
•Auto resettable fuses on each port •2RH height
•Seamless integration with 500130, 500022, 500024
•Mfr. #500136
MCM Part #
33-11520
ONLY
$56.99
BNC Video Plus Power Balun Set
Passive CCTV Power Integrator Hub
ONLY
$5.69
This unit allows video,
remote power and
2-wire PTZ control to be
transmitted via one Cat
5e/6 cable, while providing
full ground loop isolation. It may be installed either
at the camera or DVR side in conjunction with other
standard MuxLab CCTV baluns. Maximum distance
using Cat 5e cable is 2200'. Passive device, requires no
power. Mfr. #500132.
MCM Part #
33-11410
(1–3)
$50.99
(4–up)
$48.44
Composite Video
Balun
Intended for composite video
signal transmission, this balun is
perfect for video surveillance applications.
Uses one Cat5E/6 pair, and sends video up to 2,200'.
RCA male video connection to RJ45 female. •Mfr.
#500031 •Used in pairs, sold individually
MCM Part #
33-11340
(1–3)
$23.99
(4–up)
$22.79
www.MCMelectronics.com /1-800-543-4330
Follow us on:
&
1
A/V Distribution
Audio/Video
#50-7769
#50-7768
Keystone
Mount
Composite
Video Balun
Intended to
send composite
video signal over Cat 5 cable, this balun features
an RCA female connector with yellow insert, for
easy identification as the video path. Rear mounted
IDC connector allows simple, fast connection to
unterminated Cat 5 cable. Maximum distance: 1000'.
Sold individually.
VideoEase™ Passive Video Balun Receiver
Hub
Compatible with any MuxLab CCTV video balun,
this hub acts as a 16 channel passive receiver. Perfect
for use with DVR's up to 16 channels, this unit allows
cameras to be located up to 2,200' away, sending video
over Cat5A cable. Each of the 16 inputs are screw
terminal for direct connection to unterminated cable
pairs. Outputs are BNC female. Compatible with all
baluns listed below, each available separately. Passive
device, requires no power.
MCM Part # Mfr.#
33-11405 500130
82-9485
500000
82-9490
500009
33-10065 500022
33-9760
500023
Type
(1–3)
(4–up)
16CH hub $365.00 $346.75
Modular balun 16.59
15.76
Compact balun 16.59
15.76
PTZ balun
21.99
20.89
Mini balun
18.59
17.66
Four Channel Video Baluns
4Accommodates four composite video signals
4RCA or BNC connectors
41,000' max distance
Use to send up to four independent composite video
signals over a single Cat 5 run. Baluns are available
with either female RCA or BNC connectors, allowing
compatibility with a wide variety of multimedia and
security applications. They are also compatible with
RGB and component video signal formats. Baluns
feature female BNC or RCA connectors, and a single
female RJ-45 jack. Utilizes four Cat 5 cable pairs,
baluns may be inter mixed. Specifications: •Video
bandwidth: 50Hz~8MHz •Distance: 1000' max (Cat 5)
•Dimensions (excluding connectors): 1.0" (H) x 2.28"
(W) x 3.22" (L)
MCM Part #
50-7768
50-7769
(1-3)
$24.99
24.99
(4-up)
$23.79
23.79
Keystone
Mount
Composite
Video Balun
VideoEase™ Active Composite
Video Balun Transmitter
Active balun circuitry provides improved performance,
greater range and full ground loop isolation between
video components. They are perfect for video
surveillance applications where distances up to 3,000'.
Transmitters are available with 12VDC or 24VAC
power requirements, making them compatible with
most video camera power supplies. Both transmitters
require Mfr. #500009 balun as the receiver.
MCM Part # Mfr.#
Type
33-11390 500100
12VDC
82-9490
500009 Passive receiver
82-9491
500009-2PK Passive
receiver 2PK
Connectors
RCA
BNC
(1–3)
$82.99
16.59
33.29
(4–up)
$78.84
15.76
31.75
Intended to
send composite
video signal over Cat 5 cable, this balun features
an RCA female connector with yellow insert, for
easy identification as the video path. Rear mounted
IDC connector allows simple, fast connection to
unterminated Cat 5 cable. Maximum distance: 1000'.
Sold individually.
MCM Part #
50-7715
(1–3)
$10.99
(4–up)
$9.99
Keystone
Mount
Composite
Video Balun
Intended to
send composite video signal over Cat 5 cable, this
balun features a BNC female connector and is ideal for
use in video surveillance applications. Rear mounted
IDC connector allows simple, fast connection to
unterminated Cat 5 cable. Maximum distance: 1000'.
•Sold individually
MCM Part #
50-7715
(1–3)
$10.99
BNC Video + DC
Power Balun
(4–up)
$9.99
Front
4Accommodates
composite video
4Provides path
for 12VDC power
41,000' max distance
Use to send composite
video signal and low
Back
voltage DC over Cat
5 cable. This balun’s
very compact size
and male BNC connector makes for easy attachment
directly to equipment such as monitors, processors
and cameras. In addition to the BNC connection, two
screw terminals are provided for direct access to a
second cable pair. This is ideal for remotely providing
DC power to devices such as surveillance cameras
and small LCD television monitors. Utilizes two cable
pairs: •Pin 7/8 video •Pin 4 power (+) •Pin 5 power (–)
Specifications: •Maximum distance: 1000' •Bandwidth:
50Hz~8MHz •Maximum recommended distance for
power: 300' (using 12VDC, 500mA) •Dimensions
(excluding connector): 1.0" (H) x 0.85" (W) x 2.0" (L)
MCM Part #
50-7745
(1–3)
$23.12
(4–up)
$20.36
BNC Video + DC
Power Balun
4Accommodates
composite video
4Provides path
for 12VDC power
4Convenient 8" BNC pigtail
41,000' max distance
Allows BNC video as well as power to be
transmitted up to 500' via one CAT5e/6. •Mfr. 500029
•Used in pairs, sold individually
Use to send composite video signal and low voltage
DC over Cat 5 cable. This compact balun features a
male BNC connector, attached to an 8" pigtail, for
easy attachment directly to equipment. In addition to
the BNC connection, two screw terminals are provided
for direct access to two cable pairs (in parallel). This
is ideal for remotely providing DC power to devices
such as surveillance cameras and small LCD television
monitors. Utilizes three cable pairs: •Pin 7/8 video
•Pins 1/2 power (+) •Pins 4/5 power (-) Specifications:
•Bandwidth: 50Hz~8MHz •Distance: 1000' (Cat 5),
•Maximum recommended distance for power: 300'
(using 12VDC, 500mA) •Dimensions (excluding
connector): 1.0" (H) x 0.85" (W) x 2.0" (L) Sold
individually, must be used in pairs
MCM Part #
33-11335
MCM Part #
50-7746
MCM Part #
50-7716
CCTV Power plus Video Balun
ONLY
$21.99
(1–3)
$10.99
(4–up)
$9.99
(1–3)
$12.99
www.MCMelectronics.com /1-800-543-4330
(4–up)
$12.25
85
1
Audio/Video
Video Only Baluns
A/V Distribution
RCA Composite
Video Balun
BNC Video Balun
4Accommodates
composite video
4Male RCA connector
4Accepts unterminated
Cat 5 cable
41,000' max distance
BNC Video Balun
4Accommodates
composite video
4Convenient 8"
BNC pigtail
4Accepts unterminated
Cat 5 cable
41,000' max distance
Use to send composite video signal over Cat 5 cable,
this compact balun features a male BNC connector
attached to the end of an 8" pigtail. Due to their low
cost, and slim design, multiple units may be connected
side-by-side to equipment. A specially designed toolless IDC connector provides quick, reliable connection
to unterminated Cat 5 cable. Specifications:
•Bandwidth: 50Hz~8MHz •Distance: 1000' max, using
24AWG UTP •Dimensions (excluding connector):
0.625" (H) x 0.625" (W) x 1.563" (L) Sold individually,
must be used in pairs
Use to send composite
video signal over Cat 5
cable, this balun features
very compact size, and
Back
a male RCA connector
for easy attachment directly to equipment including
monitors, VCRs, DVD players, processors and
cameras. A specially designed tool-less IDC connector
provides quick, reliable connection to unterminated
Cat 5 cable. Specifications: •Bandwidth: 50Hz~8MHz
•Distance: 1000' max, using 24AWG UTP
•Dimensions (excluding connector): 0.813" (H) x
0.813" (W) x 1.875" (L) •Sold individually, must be used
in pairs
MCM Part #
50-7751
MCM Part #
50-7748
(1–3)
$12.59
#50-7722
(4–up)
$11.39
#50-7730
Front
Front 4Accommodates
composite video
4Male BNC connector
4Accepts unterminated
Cat 5 cable
41,000' max distance
Use to send composite video
signal over
Cat 5 cable, this balun’s
very compact size and male
Back
BNC connector makes for
easy attachment directly
to equipment including monitors, processors and
cameras. Due to their low cost, and slim design,
multiple units may be connected side–by–side to
equipment. A specially designed tool–less IDC
connector provides quick, reliable connection to
unterminated Cat 5 cable. Specifications: •Bandwidth:
50Hz~8MHz •Dimensions (excluding connector):
(4–up) 0.625" (H) x 0.625" (W) x 1.563" (L)
(1–3)
$13.38
#50-7724
$11.55 MCM Part #
50-7750
(1–3)
$8.99
(4–up)
$8.09
#50-7768
#33-11470
#50-10250
#50-10265
#50-10295
#33-9620
This system allows installers to take advantage of Cat 5 (or higher) cable
for interconnecting A/V components over long distances. Common signal
formats such as composite video, RGB component video, S–video and
line level audio can easily be sent considerable distances over UTP cable.
Housed in compact ABS enclosures, baluns accept standard RJ-45 male
connectors or unterminated UTP cable. Completely passive design, these
units require no power. Sold individually, all baluns must be used in pairs.
For complete information on all models, see MCMelectronics.com.
MCM Cat 5
Part #
Type
Connection
50-7710 Composite video
RJ-45
50-7720 Component video
RJ-45
50-7722 Component video, RJ-45
digital audio
50-7724 Stereo audio
RJ-45
50-7725 Stereo audio
RJ-45
50-7730 Audio/composite video RJ-45
50-7732 Audio/composite video RJ-45
50-7748 Composite video Tooless IDC
50-7768 Quad composite video RJ-45
50-7769 Quad composite video RJ-45
50-10250 VGA video (PC side)
RJ-45
50-10255 VGA video (Monitor side)RJ-45
50-10265 VGA video (PC side)
RJ-45
50-10270 VGA video (Monitor side)RJ-45
50-10290 Audio/composite video RJ-45
50-10295 Component video, RJ-45
digital audio
50-10285 Stereo audio
RJ-45
50-10287 Stereo audio
RJ-45
50-10280 Composite video
RJ-45
86
A/V Connections
Distance
RCA female (yellow)
1000'
RCA female (red/blue/green)
400'
RCA male pigtails (red/blue/green), 400'
female RCA (orange)
RCA male pigtails (red/white)
1000'
RCA female (red/white)
1000'
RCA female (red/white/yellow)
400'
RCA male pigtails (red/white/yellow)
400'
RCA male
1000'
RCA female (yellow) x 4
1000'
BNC female x 4
1000'
Female HD 15 connector
400'
Female HD 15 connector with male-male jumper 400'
Female HD 15 connector/single gang wallplate
400'
Female HD 15 connector/single gang wallplate
400'
RCA female (red/white/yellow) single gang wallplate1000'
RCA female (red/blue/green/orange) 400'
single gang wallplate
RCA female (red/white) single gang wallplate
1000'
Female 3.5mm stereo jack on single gang wallplate 1000'
RCA female (yellow) single gang wallplate
1000'
Rack Mount Chassis
Designed as a head-end cable management solution,
this allows any combination of MuxLab square baluns
to be installed within any 19" rack. 16 balun chassis
occupies 2RU space, six balun chassis occupies 1RU.
Blank filler panels available separately.
Audio/Video to Category 5 Balun System
MCM Part #
33-9620
33-11470
33-11465
(1~3)
$9.99
22.89
28.99
(4~up)
$8.99
21.79
27.59
18.99
12.99
21.49
23.99
13.38
24.99
24.99
34.99
34.99
34.99
34.99
29.99
44.79
18.09
12.25
20.39
22.79
11.55
23.79
23.79
30.49
30.49
30.49
30.49
26.99
40.27
19.99 17.99
19.99 17.99
15.99 14.59
www.MCMelectronics.com /1-800-543-4330
Model 500900
500902
500901
Description
(1–3) (4–up)
16RU panel $229.00 $217.55
6RU panel
169.00 160.55
Blank filler
16.89
16.05
Surface Mount Balun Plate
Allows Muxlab square baluns to be installed on a wall
or furniture surface for a more permanent and secure
installation. It covers the balun while allowing the pin
configuration to be displayed for ease of reference.
Mounting ears are positioned to allow multiple fixtures
to be installed next to each other. Includes mounting
screws and plastic drywall anchors. Mfr. #500915.
MCM Part #
33-11475
ONLY
$20.69
Follow us on:
&
1
A/V Distribution
Audio/Video
Decora Mount Balun Fixture
The wall mount balun fixture allows
any MuxLab square balun to be
installed behind a decora compatible
wall plate for custom AV installation.
Each balun snaps into place and
is held firmly by a spring latching
mechanism. The one-piece design
makes the product easy to install and
maintain. There are no parts to lose or
replace. Mfr. #500910.
MCM Part #
33-10585
HDMI 1x8 Splitter
Back
CATV Distribution Hub
ONLY
$24.99
CATV Balun
The VideoEase
CATV Balun
allows traditional
75ohm coaxial
cable to be replaced by a single pair of Cat 5 UTP
cable in the CATV, VHF and FM environments
in certain applications. The CATV Balun allows
broadband CATV equipment to be integrated into
structured cabling systems thereby allowing CATV
equipment to be moved or added to any convenient
modular wall outlet. The VideoEase CATV Balun
provides a versatile cabling solution for broadband
video systems used by schools, government,
corporations, hospitals, financial institutions, hotels
and convention centers. The CATV balun works in
conjunction with CATV splitters, amplifiers and cable
modems for a total cabling solution. Mfr. #500302
Features: Low return loss eliminates “ghosting”. Pair
required for use, sold individually.
MCM Part #
33-9630
ONLY
$40.99
Designed to be used with the Muxlab 500302 CATV
balun, this hub allows cable TV, off-air, broadband
and other RF video to be distributed to up to eight
television receivers, recorders or similar devices, via
Cat5 cable. It provides gain amplification and port
buffering as well as ground loop isolation. Features:
•900MHz bandwidth •CATV, Internet, digital cable
support •Bi-directional transmission •Single "F"
connector input, eight RJ45 outputs.
MCM Part #
33-11440
33-9630
Mfr. # 500300
500302
Description
1 x 8 hub
CATV balun
High quality distribution amplifier allows up to
eight video monitors to be driven from a single
HDMI source. It is perfect for all types of HD video
applications including home theater, conference rooms,
schools and retail locations. Features: •Supports 3D
video and HDCP 2.0 •Supports 1080p/12-bit Deep
Color •Rugged metal enclosure •Rear panel ON/
OFF rocker switch •Requires 5VDC/3A, AC adapter
included •Dimensions: 11⁄8" (H) x 125⁄8" (W) 4" (D)
MCM Part #
33-12515
ONLY
$229.00
ONLY
$599.00
40.99
Distribution Amplifiers/Splitters
HDMI Distribution Amplifiers
HDMI 1x2 Splitter
High quality distribution amplifier allows two video
monitors to be driven from a single HDMI source.
It is perfect for all types of HD video applications
including home theater, conference rooms, schools
and retail locations. Features: •Supports 3D video
and HDCP 2.0 •Supports 1080p/12-bit Deep Color
•Rugged metal enclosure •Requires 5VDC/1A, AC
adapter included •Dimensions: 11⁄8" (H) x 51⁄2" (W)
35⁄8" (D)
MCM Part #
33-12505
ONLY
$69.99
Split one HDMI source to distribute to multiple
high-definition displays. Ideal for retail displays,
entertainment venues, and multiple residential displays.
Extends the range of HDMI compliant device by
equalizing and boosting the HDMI signal up to an
additional 50'. Specifications: •Input/output: HDMI
v1.2a+, HDCP 1.0/1.1 •Video formats supported:
VGA 1920 x 1200 and 1080p •Operating frequency:
Up to 165MHz •External power supply (included):
5VDC for 110V
Dimensions (L x W x H) with feet
MCM Part #
Description
3.4" x 1.73" x .66"
33-10540
1 x 2
10.625" x 7.18" x 1.83"
33-10542
1 x 4
17.323" x 7.893" x 1.748"
33-10545
1 x 8
(1-4)
(5-up)
$34.99
$32.50
79.99
74.99
149.00
145.00
Shielded CATV Balun
The Shielded CATV Balun (500306) allows RG6
coaxial cable to be replaced by Cat 5e/6/7 STP or
UTP cable in the terrestrial RF environment. Used
in pairs, the Shielded CATV Balun allows broadband
CATV equipment to be integrated into a structured
cabling system thereby allowing CATV equipment
to be moved or added to any convenient modular
wall outlet. When used with Cat 5e/6/7 shielded
twisted pair cable, the connection supports greater
RF amplification and therefore greater distance with
less EMI/RFI egress versus other UTP CATV baluns.
Features: •Cast aluminum enclosure for maximum
EMI/RFI shielding •Bandwidth up to 900 MHz
including Internet, digital cable •Supports Cat5e/6/7
STP and UTP •Lower EMI /RFI egress when STP is
used •Low insertion loss
•Must be installed in pairs to function.
MCM Part #
33-12880
33-12881
Model
500306
500306-2PK
Quantity
Single
Pair
ONLY
$49.99
89.99
HDMI Distribution
Amplifier
HDMI 1x4 Splitter
High quality distribution amplifier allows up to
four video monitors to be driven from a single
HDMI source. It is perfect for all types of HD video
applications including home theater, conference rooms,
schools and retail locations. Features: •Selectable
resolution detection modes •Supports 3D video
and HDCP 2.0 •Supports 1080p/12-bit Deep Color
•Rugged metal enclosure •Requires 5VDC/2A, AC
adapter included •Dimensions: 11⁄8" (H) x 71⁄4" (W)
43⁄4" (D)
MCM Part #
33-12510
ONLY
$109.00
•Enhanced amplified signals
for longer cable runs
•HDMI/HDCP compliant
•Supports high-resolution
displays of UXGA, 480i,
480p, 720p, 1080i,
1080p •Secure HDMI
connection with
integrated cable retention
bracket •Multiple amplifiers
can be cascaded for additional
high definition distribution
MCM Part #
33-11525
33-11055
33-11057
Mfr. #
HA2-3
HA4-3
HA8
www.MCMelectronics.com /1-800-543-4330
Description
1 x 2
1 x 4
1 x 8
ONLY
$92.69
249.26
307.97
87
1
Audio/Video
A/V Distribution
Distribution Amplifiers/Splitters
HDMI Distribution
Amplifiers
High quality HDMI splitters allow a single high
definition video source to drive multiple video
monitors. Features: •HDMI 1.4a with 3D and HDCP
1.2 compliance •Supports up to 1080p resolution
•24/36 bit Deep color support •Built in equalization
drives cables up to 65' from each output •Rugged metal
housing with gold plated connectors •Dimensions:
1" (H) x 4.367" (W) x 2.95" (D) •Requires 5VDC, AC
adapter included
HDMI 1x2 Splitter/Cat5 Extender Set
Complete set consists of one HDMI to Cat5
transmitter, and two Cat5 to HDMI receivers,
allowoing a single source to send high definition video
up to 160' to two video monitors. Features: •HDMI
1.2a compliant •Supports 24 bit Deep Color and
1080p resolution •Auto equalization •Rugged metal
housing with gold plated connectors •Dimensions
(transmitter): 1" (H) x 4.0" (W) x 3.9" (D) •Dimensions
(each receiver): 1" (H) x 2.5" (W) x 3.9" (D) •Requires
5VDC, three AC adaptors included •Sold as a set of
one transmitter and two receivers
MCM Part #
50-15005
MCM Part #
33-12710
33-12715
Ouputs
Two
Four
ONLY
$39.99
64.99
Component Audio/Video HDTV
Distribution Amplifier with Digital Audio
4Single input with eight outputs
4Loop through output to cascade additional units
4Compatible with Y/Pr/Pb and composite video
applications
4Accommodates L/R line level and SPDIF digital audio
Distribute digital and analog television signals, from
a single A/V source to nine televisions/receivers,
or use one port as a loop-thru output port to
cascade additional distribution amplifiers. Features:
•Component video (Y, Pr, Pb, or Y, Cr, Cb),
composite video, analog audio and SPDIF digital
audio distribution •High bandwidth (>50MHz)
performance, low distortion, and one-to-one signal
ratio ensures equal picture quality. Power: 9~10VAC,
500mA adapter included. Mfr. #AV901HD.
ONLY
$119.00
1x4 Component Video Distribution Amplifier
MCM Part #
33-10090
ONLY
$208.06
A/V amplified splitter is designed for distributing
high definition video signals from a single source to
up to four television monitors. Path is also provided
for left and right line level audio Features: •Y/Pr/
Pb component video path may also be used for up
to three individual composite video signals •Rugged
metal enclosure •Requires 12VDC/500mA, AC adapter
included
MCM Part #
33-12580
ONLY
$34.99
HDMI 1x8 Splitter/Cat5 Extender Set
Complete set consists of one HDMI to Cat5
transmitter, and eight Cat5 to HDMI receivers,
allowoing a single source to send high definition video
up to 160' to eight video monitors. Features: •HDMI
1.2a compliant •Supports 24 bit deep color and 1080p
resolution •Auto equalization •Rugged metal housing
with gold plated connectors •Dimensions (transmitter):
1.8" (H) x 17.3" (W) x 7.9" (D) •Dimensions (each
receiver): 1" (H) x 2.5" (W) x 3.9" (D) •Requires
5VDC, nine AC adaptors included •Sold as a
set of one transmitter and eight receivers
MCM Part #
50-15015
88
ONLY
$299.00
Component Audio/Video HDTV Distribution
Amplifier with Digital Audio
4Single input with four outputs
4Loop through output to cascade additional units
4Compatible with Y/Pr/Pb and composite video
applications
4Accommodates L/R line level and SPDIF digital audio
A/V amplified splitter is designed for distributing high
definition video signals from a single source to up to
nine television monitors. Path is also provided for left
and right line level audio and coaxial digital audio.
Features: •Y/Pr/Pb component video path may also
be used for up to three individual composite video
signals •One output may be used to daisy chain up to
nine additional amplifiers, allowing distribution to up
to 81 sets •Compatible with all digital audio formats
•Rugged metal enclosure •Requires 12VDC/1.2A, AC
adapter included
Allows for multiple signal distribution equal to source
signal input. Distribute digital/HDTV and analog
television signals, including digital audio and
composite video from a single A/V source to five
televisions/receivers, or use one loop-thru output
port to cascade additional distribution amplifiers.
Features: •Component video (Y, Pr, Pb, or Y, Cr, Cb),
composite video and SPDIF digital audio distribution
•Compatible with all HDTV, digital and analog
signals •High bandwidth (>50MHz) performance, low
distortion, and one-to-one signal ratio ensures equal
picture quality Power: •9~10VAC, 500mA adapter
included •Mfr. #AV501HDX
MCM Part #
33-12590
MCM Part #
33-10087
1x9 Component Video Distribution Amplifier
ONLY
$139.00
www.MCMelectronics.com /1-800-543-4330
ONLY
$155.53
Follow us on:
&
1
A/V Distribution
Audio/Video
High-Performance
Distribution Amps
4Single input with four or seven outputs
4Accommodates L/R line level audio and composite video
Component Audio/Video
HDTV Distribution Amplifier
4Single input with eight outputs
4Loop through output to cascade additional units
4Accommodates component video (Y/Pr/Pb) applications
4Accommodates L/R line level audio
These high-performance distribution amplifiers feature
specifications such as a true one-to-one ratio, no signal
loss, low noise, low distortion and unity gain.
HDTV Compatible 5 x 8 Multi-Switch
Distribute digital/HDTV and analog television signals
from a single A/V source to nine televisions/receivers,
or use one of the output ports to cascade additional
distribution amplifiers. Features: •Component video
(Y, Pr, Pb) and audio distribution •Compatible with all
HDTV, digital and analog signals •High performance,
low distortion, one-to-one signal ratio ensures equal
picture quality •Unlimited cascade capability
•Mfr. #AV901COMP
Expand and distribute your DIRECTV satellite signal
from any phase II or phase III, 18" x 24" antennas,
to up to eight rooms. Also capable of combining
off-air or cable TV with satellite signals. Ideal for dual
tuner DVRs. Features: •Four satellite inputs and one
terrestrial TV input for up to eight satellite receivers
•Built-in amplifier to overcome splitter loss •Two dual
LNB selectable by 13/18VDC or 22KHz tone •Matrix
routes between any inputs to any outputs
•Rugged, weatherproof outdoor housing
•Bandwidth: 5MHz~2150MHz •Power:
24VAC power supply included.
MCM Part #
33-10080
MCM Part #
33-10250
ONLY
$120.51
MCM Part #
33-6875
33-6880
Mfr. #
AV400
AV700
Outputs
Four
Seven
ONLY
$52.00
67.97
Back
ONLY
$134.93
A/V Distribution Amplifier/Selector
VGA Splitter/Distribution Amplifier
•400MHz pixel frequency •Easy installation •Can
be cascaded •Supports DDC, DDC2, DDC2B
•Compatible with standard VGA cards
Component Video
Distribution Amplifier
MCM Part #
33-12070
33-12075
4Single input with four outputs
4Accommodates component video
(Y/Pr/Pb) applications
4Accommodates L/R line level audio
Four-way audio/component-video distribution
amplifier for Y, Cb, Cr and Y, Pr, Pb applications.
Features high performance, low distortion and true
one-to-one signal ratio. These professional grade
amplifiers are cascadable for use in large displays and
are enclosed in metal housings to reduce interference.
Mfr. #AV400COMP.
MCM Part #
33-7050
ONLY
$98.87
Outputs
Four
Eight
Mfr. #
VG41DA
VG81DA
ONLY
$99.99
149.00
MCM Part #
30-1376
•This
isolation transformer connects into the audio/video
system and breaks the ground path through cables
between components •Eliminates the dreaded hum
bars •Compatible with HD component distribution
amplifiers •Up to three video channels may be used
for three individual composite video signals if desired
•Mfr. #DCB101
MCM Part #
33-11062
MCM Part #
555-18804
ONLY
$41.70
(1-3)
$26.99
(4-up)
$24.99
A/V 1X4
Distribution
Block
The FP AVDA4 is the ideal choice in applications
where consumer format audio and video signals
need to be distributed simultaneously. audio and
video inputs and outputs are made on the top panel
phono jacks. The FP AVDA4 has a single 75 Ω input
phono jack for the video signal and two phono
jacks for the left and right audio inputs. Four source
terminated, 75 Ω video outputs are provided on the
video output phono jacks. Four stereo audio outputs
are provided on phono jack pairs located adjacent
to the corresponding video output. Unused outputs
need not be terminated. audio and video outputs are
at unity gain. Features: •RCA input and output •Input
Impedance: 75 Ω •Output Level: 1 V p p (into 75 Ω)
•Power Requirement: 24 VDC @ 60 mA •Mfr. #FPAVDA4
Five
Channel DC
Isolation
Unit
Tabletop distribution amplifier allows selection
between two A/V inputs and provides up to four
outputs. Independent left and right audio signal paths
allow compatibility with stereo sources including
CD/DVD players, VCRs, video games and satellite
receivers. Front panel pushbutton selects between
two input sources, and internal amplifier maintains
signal quality when distributed to four outputs. Gain
at each output is 2dB over input signal level. Rugged
metal enclosure measures 15⁄8" (H) x 7" (W) x 27⁄8" (D),
including non–skid rubber feet. Color–coded input/
output connections are RCA type female. Requires
12VDC, AC adapter included.
ONLY
$227.93
S-Video Distribution Amplifier
Allows for multiple signal distribution
equal to the source signal input. Four way audio/video
distribution amplifier with S-video inputs and outputs.
Features high performance, low distortion and true
one-to-one signal ratio. These professional grade
amplifiers are cascadable for use in large displays and
are enclosed in metal housings to reduce interference.
Mfr. #AV400SV.
MCM Part #
33-7045
www.MCMelectronics.com /1-800-543-4330
ONLY
$73.12
89
1
Audio/Video
A/V Distribution
Distribution Amplifiers/Splitters
Dual Channel Ground Loop
Isolator
EZ Hum Killer 2
•Transformer isolation module
•Ground-loop hum elimination
•Ground-lift switch •Fully
shielded •RCA connections
MCM Part #
555-18832
555-18834
555-18836
Mfr. #
EZ-HK1
EZ-HK2
EZ-HK3
Connections
Stereo Audio
Composite Video
RCA A/V
ONLY
$73.26
79.03
83.47
Ground loop problems
in A/V systems normally
appear as a hum in
speakers or horizontal
bars on video monitors. These
problems typically occur when
multiple components receive AC power
from different locations, or because CATV, satellite
or antenna systems provide a separate ground point.
This isolator solves that problem by providing ground
path isolation between components, while maintaining
full frequency response. Features: •Rugged steel
enclosure •RCA input and output connections •Fully
independent L/R channels Specifications: •Frequency
response: 10Hz~50KHz •THD: 0.01% •Dimensions:
1.50" (H) x 3.50" (W) x 2.50" (D) •Passive
device, requires no power
MCM Part #
50-9040
Stereo Ground Loop Isolator
•Reduces or eliminates noise caused by ground
loops that exist between multiple components in
a automotive sound system •Also very effective in
home audio systems where ground loops between
components cause the presence of 60Hz hum •Simple
in-line connection •Handles two unbalanced line
level audio signals (stereo) •Attached pigtails include
molded male and female RCA type connectors
MCM Part #
60-10515
ONLY
$4.99
Deluxe In-Line Noise Filter
•Line level filter isolated ground between amp and
radio •Eliminates noise due to signal path ground
loops •Gold plated RCA connectors
MCM Part #
60-405
(1-3)
$34.99
MCM Part #
555-18816
555-18818
Model #
AV-HK1
AV-HK1X
Operation
Stereo RCA
Mono XLR
ONLY
$76.42
83.89
Media Converters
(4-up)
$30.49
DTI Dual
Channel
Ground
Loop
Isolator
Component Video
Plus Digital Audio to HDMI Converter
The DTI™
is a high quality,
passive solution to ground
loop hum. Dual, high quality isolation transformers
provide ground path isolation between components,
while maintaining full frequency response. Features:
•Virtually indestructible, extruded aluminum
enclosure •1⁄4" TRS, XLR and RCA input and output
connection pairs, supporting balanced or unbalanced
lines •Two independent channels for correcting
two ground loops, or for processing a stereo signal
Specifications: •Frequency response: 10Hz~50KHz,
±0.5dB @ +4dBu •THD: 0.01% typical @ 1KHz,
+18dBu •Insertion loss: 0.4dB @ 100Kohm load,
5.5dB @ 600ohm load •Dimensions: 1.75" (H) x 4.2"
(W) x 3.5" (D) •Passive device, requires no power
MCM Part #
555-7685
Hum Killer
Transformer based ground-loop isolator, eliminates
hum commonly associated with ground loop problems.
Model
DTI
Compact converter allows conversion of a component
video signal and a digital audio signal to an HDMI
1.2 signal. Features: •Supports up to 1080p resolution
•24bit deep color support •LPCM uncompressed
audio support •DTS and Dolby® Digital support
•Required power: 5VDC (adapter included)
MCM Part #
33-11600
ONLY
$49.99
ONLY
$60.00
ONLY
$10.80
Component Video
Plus Analog Audio to HDMI Converter
Compact converter allows conversion of a component
video signal and a digital audio signal to an HDMI
1.2 signal. Features: •Supports up to 1080p resolution
•24bit deep color support •LPCM uncompressed
audio support •DTS and Dolby® Digital support
•Required power: 5VDC (adapter included)
BNC Composite Video Ground Loop Isolator
Stereo Ground Loop Isolator
Ideal for solving ground loop problems that manifest
themselves as interference patterns on video monitors
or 60 cycle hum in audio equipment. High quality
transformer ensures full ground isolation between
input and output, while passing video signal Features:
•Supports NTSC, PAL or SECAM
Ideal for solving ground loop problems that manifest
themselves as interference patterns on video monitors
or 60 cycle hum in audio equipment. High quality
transformer ensures full ground isolation between
input and output, while passing audio signal
Features: •Supports two unbalanced audio
channels •Dimensions 1.3" (dia.) x 2.5" (L)
MCM Part #
50-14525
MCM Part #
50-14530
90
ONLY
$16.19
MCM Part #
33-11605
ONLY
$49.99
ONLY
$4.79
www.MCMelectronics.com /1-800-543-4330
Follow us on:
&
1
A/V Distribution
Audio/Video
24 Bit/96K D/A Convertor
HDMI to Component Video
Plus Analog Audio Converter
Compact converter allows conversion of an HDMI
audio/video signal to an analog component video
plus analog L/R audio signal. Features: •Supports
up to 1080p resolution •LPCM uncompressed audio
support •HDCP 1.2 compliant •Required power:
5VDC (adapter included)
MCM Part #
33-11610
ONLY
$49.99
VGA Plus Analog Audio to HDMI Converter
Compact converter allows conversion of a VGA
video signal plus L/R analog audio signal to an
HDMI audio/video signal. Features: •Supports up
to 1280x1024 resolution •24bit deep color support
•Required power: 5VDC (adapter included)
MCM Part #
33-11625
ONLY
$49.99
Digital to Analog D/A
Audio Converter
HDMI to VGA Plus Analog Audio Converter
Compact converter allows conversion of an HDMI
audio/video signal to an analog VGA video plus
analog L/R audio signal. Features: •Supports up
to 1080p resolution •LPCM uncompressed audio
support •HDCP 1.2 compliant •Required power:
5VDC (adapter included)
MCM Part #
33-11615
ONLY
$49.99
Compact converter allows
conversion of a coaxial or
toslink digital audio signal
to analog unbalanced
line level L/R audio for connection
to an external devices such as
an amplifier, using standard RCA jacks. Features:
•Supports 32KHz, 44.1KHz, 48KHz, and 96KHz
sampling rates •Noise free operation •Required power:
5VDC (adapter included)
MCM Part #
33-11630
MCM Part #
33-11620
ONLY
$64.99
ONLY
$99.99
Universal Digital / Analog Audio Converter
Analog to Digital A/D
Audio Converter
MCM Part #
33-11635
Compact converter allows conversion of an HDMI
audio/video signal to an analog composite video plus
analog L/R audio signal. Features: •Supports up to
480i resolution •LPCM uncompressed audio support
•Required power: 5VDC (adapter included)
MCM Part #
50-7774
ONLY
$34.49
Compact converter allows
conversion of an analog L/R line
level audio signal to a coaxial
or toslink digital audio signal. Features: •Supports
48KHz sampling rate •Noise free operation •Supports
uncompressed channel LPCM digital audio •Required
power: 5VDC (adapter included)
HDMI to Composite
Video Plus Analog Audio Converter
This compact unit will accept standard coax or Toslink
SPDIF signal, and convert it to line level audio. It is
perfect when there is a need to send digital audio signal
to an amplifier not having digital inputs, including
home audio receivers, prosound amplifiers and mixing
consoles. It is perfect when an unused digital output on
a piece of home theater equipment needs to be sent to
a separate whole house audio amplifier. Features: •Two
Toslink inputs •Two coax inputs •Four-position input
selector with LED indication •1⁄4" headphone output
with adjustable level •Separate REC and AMP line
level L/R RCA outputs (both fixed level) •LED
power indicator Specifications: •Digital input: 96KHz
(standard SPDIF) •Resolution capability: 24 bit
•Amplitude linearity: 1.06dB •Frequency response:
20Hz~20KHz •Channel separation: 100dB @
1KHz •S/N ratio: 103dB •THD: <0.0015% •Digital
filter: 82dB •Headphone output: 700mW, 8~32ohm
•Power requirements: 12VDC, AC adapter included
•Dimensions: 11⁄2" (H) x 93⁄4" (W) x 41⁄2" (D)
ONLY
$34.49
Highly versatile device will convert stereo audio
signal between digital and analog formats. Features:
•Three position input switch selects between L/R
analog line level, TOSLINK or coaxial digital
input •Simultaneously provides L/R line level,
plus TOSLINK and coaxial digital audio output
•Dimensions: 1.1" (H) x 4.13" (W) x 2.9" (D)
•Requires 12VDC, AC adapter included
MCM Part #
33-12700
ONLY
$59.99
Component Video Plus Audio to VGA Converter
Compact adapter accepts line level left and right
audio, plus component video (Y/Pr/Pb) video and
provides VGA plus audio output. •3.5mm audio
inputs •Red Blue Green RCA female input •HD15
female output •3.5mm audio output •Supports
multiple resolutions, the output resolution matches
that of the input •Dimensions: 1.1" (H) x 2.9" (W) x
1.3" (D) •Mfr. #PYPBV760
MCM Part #
50-13840
(1–3)
$53.99
(4–up)
$50.99
Bi-Directional Digital Audio Converter
Highly versatile device converts digital audio between
TOSLINK and coaxial format. Features: •TOSLINK
or coaxial input •TOSLINK and coaxial output
•Both outputs function simultaneously •Dimensions:
1.1" (H) x 2.55" (W) x 2.9" (D) •Requires
12VDC, AC adapter included
MCM Part #
33-12705
www.MCMelectronics.com /1-800-543-4330
ONLY
$24.99
91
1
Audio/Video
A/V Distribution
Media Converters
Composite Video
Plus L/R Analog Audio
to HDMI Scaler/Converter
Back
•Use your composite and S-video equipment with
HDMI televisions, switches, receivers and more •Basic
upscaling to 720P at 60MHz •Syncs audio and video
channels •Works with any HDMI to DVI adapter
•Dimensions: 6.1" x 2.75" x 0.90" •Includes 5V, 2A
power supply
•Up-scales non-HD video composite or
S-video (analog) with L/R audio signal to an HDMI
output (digital) •Output can be fixed at 720p or 1080p
by a select switch •Scales up Composite video or
S-video to HDMI 720p and full 1080p HDMI output
is optional at 720P/60Hz or 1080P/60Hz •Input video
systems - NTSC and PAL automatically detected
and adjusted •Composite video and S-video can stay
simultaneously connected to the unit and can be
selected as the input by the switch button •Composite
video and S-video share the same audio input •Input
audio is integrated into HDMI output as well as passthrough •The scaler will remember settings even when
the power is off •Mfr. #HSC14
MCM Part #
33-10720
MCM Part #
33-12055
®
Composite/S-Video to HDMI Scaler
ONLY
$72.09
HDMI to
Composite
Video/Audio
Converter
Back
Compact
converter accepts
HDMI high definition input and provides composite
video plus line level audio output. HD video format
is down-converted to NTSC 480i format, allowing
viewing on earlier televisions or security monitors.
Multichannel digital audio is decoded and downmixed to L/R stereo line level. •HDCP compliant
•HDMI 1.2a compliant •Mfr. #HSC12
MCM Part #
33-11066
ONLY
$129.00
Digital Signage Media Player
with Internal ATSC Television Tuner
This high quality advertising solution allows users
to play content from multiple sources such as a solid
state memory device, hard drive, or IP streams from
ethernet. It has an extremely effective performance
versus cost ratio and provides a great return on
investment. The powerful internal video processor
rivals the performance of a PC, with graphics
capability that is on par with a Blu-ray player but with
much greater reliability because there are no moving
parts. Features: •High definition real time decoding up
to 25Mbps over ethernet •Multi-layering: video and
web browser •Integrated event logging •UDP/RTP
multicast stream MPEG2 and H.264 decoding •SNMP
network control API •Multilayer support for browser
overlays •Internal compact flash storage •Integrated
play list •Optional ATSC television tuner
MCM Part #
33-12080
33-11082
92
Tuner
Yes
No
Mfr. #
MP500T
MP500R
ONLY
$748.00
699.00
ONLY
$145.00
VGA Video Plus
L/R Analog Audio to HDMI Scaler/Converter
Frequency Agile HDTV RF Modulator
The Channel Plus 5415HD is a single channel, high
definition video modulator that takes the output from
a single HD source and broadcasts it over standard
coax cable. Frequency agile output allows signal to be
placed on any ATSC channel between 2.1 ~ 135.1. It
accepts component video input (y/Pb/Pr), plus coaxial
digital audio input, and provides resolution up to
720p. Internal 25dBm RF amplifier ensures plenty of
output strength for long cable runs and multiple set
distribution. Features: •Standard “F” type coax output
•Supports HD-video up to 720p @ 60 fps •Component
video input •Digital audio input: SPDIF (female
RCA, 75ohm) •Easy to use, front panel single button
Channel Plus™ programming •No computer needed
for programming •Integrated 25dB video amplifier
•Supports DTV channels 2.1 to 135.1 •MPEG2 video
encoding •QAM modulator encoding •Fan cooled
•Dimensions: 1.5" (H) x 10.4" (D) x 4.7" (D)
MCM Part #
33-12000
The HSC16 converts a PC VGA and audio to HDMI,
with the benefit of connecting the PC to a 1080p
HDTV. The converter will support multiple resolutions
up to 1920 x 1080 @ 60Hz. This unit supports the
most popular resolutions to ensure high compatibility
with most brands of PCs and HDTVs. It provides an
economical solution for connecting a PC to a HDTV.
Mfr. #HSC16
MCM Part #
33-12060
ONLY
$86.99
Component Video
plus L/R Analog
Audio to HDMI
Scaler/Converter
Converts HD component video (Y-Pb-Pr) and left
and right audio signals to an HDMI output. This
permits any source with any range of component
video to be viewed on any HDMI display. Features:
•Can be displayed on any HDMI display. •HDMI 1.2
compliant •HDCP compliant •Supports: 480i, 480p,
576i, 576p, 720p, 1080i and 1080p •Mfr. #HSC20
MCM Part #
33-12065
ONLY
$719.00
®
RF Modulator
Allows connection of any audio/video source to a
television without RCA inputs. Modulator is also
cascadable (using standard CATV signal combiners),
allowing a single coaxial cable to carry multiple video
sources. Features: •Three RCA inputs (composite video
and stereo audio) •Digital channel display •CATV
channels: 64~125 (except 95~99) •UHF channels:
14~69 •3' coaxial cable included •Channel memory
•Operates on 9VDC, 200mA power supply (included)
MCM Part #
33-11095
ONLY
$31.40
Back
ONLY
$86.99
Digital UHF Modulator
4Accepts composite video/line level audio source
4Selectable output on UHF 14~69 and CATV 65~139
4LED output channel display
#33-0001
#33-0003
Composite Video to S-Video Adapter
This high-quality adapter converts composite video to
S–video and S–video to composite video. The adapter
measures only 13⁄4" long and 1⁄2" in diameter allowing
it to plug directly into the equipment and solves the
problems associated with mixing composite and
S–video inputs and outputs.
MCM Part # Description
33-0001
S male to RCA female
33-0003
S female to RCA male
(ea.)
$3.99
3.99
(2-up)
$3.69
3.69
www.MCMelectronics.com /1-800-543-4330
The USM-8D is a low cost,
frequency stable, UHF modulator developed for use
in adding satellite, VCR, or security video channels to
an existing home distribution system. The frequency
adjustable feature allows multiple channel use at an
extremely low cost. Specifications: •Frequency range:
UHF channels 14~69 and CATV channels 65~139
•Video input: Composite •Output impedance: 75ohm
•Output level: 7dBmV •Power input: 115VAC, 60Hz,
5W •Connectors: “F” for RF, RCA video and audio
•Mfr. #USM-8D
MCM Part #
33-2740
(1-9)
$52.00
Follow us on:
(10-up)
$49.28
&
1
A/V Distribution
Audio/Video
MINI RF Modulator
The Terk MINI modulator
is a compact, inexpensive modulator
that will convert any video source
to VHF for viewing on your TV on
either channel 3 or 4. Its low signal
loss enables it to deliver excellent
picture and sound quality. The
MINI reduces the clutter around
your TV by easily mounting on
your wall or entertainment center. The MINI was
designed to be in-line, so that it can hang or be
mounted on a vertical surface and out-of-sight. After
first installation, there is no need to access the MINI
again. It features automatic signal detection and
automatically switches between A/V sources when a
signal is detected. Mfr. #MINI.
MCM Part #
33-9645
ONLY
$21.10
Back
RF Modulator and Video Switcher
4Four input selector
4Accepts S-video or composite
video/line level audio sources
4Selectable output on CH3 or CH4
•Lets you connect components with S-video or
composite output (DVD, satellite) to a TV without
A/V jacks, by modulating the signal to RF •Ideal for
hooking up several components to a TV •Combines
RF modulator and S-video switcher into one unit
•Converts any input (S-video, composite, A/V, stereo)
to RF output •A/V and S-video switching •Composite
to S-video convertor •Front input, stereo input •Gold
plated connectors
MCM Part #
CRF940
ONLY
$30.89
Back
Three Way HDMI Switch
Digital RF Modulators
4Models available
with 1, 2 or 4 inputs
4Places each input source on an independent channel
4Selectable output on UHF 14~69 and CATV 65~125
4Allows source selection by simply changing channels
The 5515, 5525-01 and 5545-01 are one, two and four
channel input modulators with loop–out capabilities
and integrated IR control. Each offers IR emitter
output jacks and the ability to remotely power a
DA-550 series or an DA-8200 series distribution panel
from up to 75' away. The 5500 series works with both
the 12 volt and 5 volt IR systems and accessories. The
5515, 5525-01 and 5545-01 offer 75ohm termination
jumpers on all channels to loop–through the video and
audio signals. Features include: 1, 2 and 4 channels,
push button programming, UHF 14~64 and CATV
65~125, 25dBmV output.
MCM Part #
5515
5525-01
5545-01
Outputs
1
2
4
Video Selectors
Three Input Manual/
Automatic HDMI Switch
•3-in-1 out switching
•HDCP compliant •Manual
source selection switch
•Automatically switches to
active source •No AC adapter needed •Mfr. #HS103
MCM Part #
33-12115
Back
®
ONLY
$59.99
145.23
149.00
ONLY
$28.90
•Supports 1080p resolution •Automatically switches
between HDMI input sources •Push button operation
•Remote control included for manual operation •Two
rear panel inputs, one front panel input •Rear panel
output •HDMI v1.3 HDCP compliant •5VDC, 1A
power supply (included)
MCM Part #
33-11105
ONLY
$41.70
#33-10535
#33-10533
#33-10532
HDMI 1.3 Input Switch
•Easily switch between multiple HDMI sources while
running a single HDMI cable to your high-definition
display •Extends the range of HDMI compliant device
by equalizing HDMI signal •Included discrete IR
remote (not included with #33-10532) •Auto sensing
inputs allow switching between only active HDMI
sources Specifications: •Output video: HDMI 1.3b +
HDCP 1.0/1.1 •Video formats supported: Up to VGA
920 x 1200 and HD 1080P •Video amplifier bandwidth:
2.5Gpbs/250MHz •External power supply (included):
2A 5VDC for 110V (neither included nor required for
#33-10532)
MCM Part #
33-10532
33-10533
33-10535
Description
2 x 1
3 x 1
5 x 1
(1-4)
$26.25 34.85 52.00 (5-up)
$20.65
31.83
46.39
SLV A/V RF Modulator
4Accepts composite video/line level audio source
4Selectable output on CH3 or CH4
4Auto switching between antenna and A/V source
The mini RF modulator is a compact, inexpensive
modulator that will convert any composite video
source to VHF for viewing on your TV on either
channel 3 or 4. Its low signal loss enables it to deliver
excellent picture and sound quality. This modulator
allows you to connect additional A/V components,
such as a DVD player or a gaming system, to your TV
when there are no available RCA jacks. Inputs: Three
RCA (composite video and stereo audio), one “F”.
Two Way HDMI Switch
MCM Part #
33-9775
MCM Part #
33-12200
(1-9)
$13.89
(10-49)
$13.20
Two-way switch allows two high definition
video sources to be connected to a single display.
Automatic operation selects last source that was
powered on, or manually select between sources
via the push button switch. Features: •Automatic or
manual selection •Supports HDTV up to 1080p and
PC resolution up to 1900x1200 •1.3 and HDCP passthrough compliant •24K gold plated connections
ONLY
$20.59
Compact 3x1 HDMI Selector
Low cost switch provides high reliablility and is
compatible with all HD formats up to 1080p. Features:
•Connect up to three HD devices to a single monitor
•Automatic or manual input selection •12bit Deep
color and HDMI 1.3b compliant •Dimensions:
0.6" (H) x 2.0" (W) x 2.0" (D) •Powered from
HDMI signal cable, no external power required
MCM Part #
33-12720
www.MCMelectronics.com /1-800-543-4330
ONLY
$16.99
93
1
Audio/Video
A/V Distribution
Video Selectors
Back
Four Input Manual/Automatic HDMI Switch
•4-in-1 out switching •Compliant with HDMI/HDCP
requirements •Remote control •Automatic source
detection •RS-232 control support •Mfr. #HM41SR
MCM Part #
33-12110
ONLY
$120.00
HDMI 2x1 Switch
Compact self-powered switch
measures less than 2" square,
and allows selection of two
HDMI sources to a single
HD display. Features: •LED
indication of selected source
•Rugged metal housing •Bidirectional capability also allows single source
to two display switching (one display at a time)
•V1.4/3D compatible, HDCP compliant •Self
powered, no external power source required
MCM Part #
33-12555
HDMI Video 8 x 8 Matrix Switcher
with Category 5 Active Baluns
•HDMI (Deep Color) •HDCP compliant •Allows
any source to be displayed on multiple displays at
once •Supports 7.1 channel digital audio •Matrix
master can switch every output channel to any HDMI
input by push button, IR remote control, or RS-232
control •Allows control of main matrix center through
control line at remote receiver •Allows control of
local HDMI sources such as DVD and TiVo® by IR
extender through control path at remote receiver
•Easy installation with rack-mounting and wallmounting designs for master and receiver respectively
•Network control via RS-232 or USB interface
•Remote powering of HSMR receivers •Remote
HSMR receivers have digital readout of selected
channel •Includes eight Cat 5 to HDMI receivers •Mfr.
#HSW88C
MCM Part #
33-12120
ONLY
$4500.00
A/V Digital Analog Selector with IR Remote
Full-featured switcher connects up to three “like-kind”
sources (HDMI to HDMI, VGA to VGA, etc.) to a
single HDTV display. Features: •HDMI, VGA, RGB
component video, and composite A/V connections
•Delivers clean, uncompressed digital signals
•Engineered for optimal signal transfer and minimal
signal loss •Built-in HDMI output signal extender
up to 100' (total length) •H.D.C.P. (High-Bandwidth
Digital Content Protection) compliant •Supports highdefinition 1080p and UXGA •Compact, time-saving
LED illuminated control center and easy selection with
remote control or front panel push-button controls
•Power: 6V,400mA AC/DC power adapter (included)
•Dimensions: 121⁄2" x 6" x 21⁄4".
MCM Part #
33-10424
ONLY
$17.99
ONLY
$150.32
HDMI 4x2
Matrix Selector
Back
4 x 2 Component Video Matrix
The SW204HD allows a user to connect up to four
component video sources to two different displays,
and can be controlled via USB, RS232, the included
remote control, or the front panel interface. Features:
•Infrared remote learning function •LED status
indicators •Included remote control •PC control
software included •Component video and coaxial
digital audio support •Rackmount ears included
MCM Part #
33-12095
ONLY
$205.00
High quality selector allows two video monitors to
independently select from up to four high definition
HDMI A/V sources. Independent front panel push
button controls for each monitor output provide
LED indication of the source selected. Additionally,
TOSLINK and coaxial digital audio output is
provided, allowing audio signal to be fed to a separate
system. Features: •IR remote control •Supports 3D
video and HDCP 2.0 •Supports 1080p/12-bit Deep
Color •Supports all digital audio formats •Dip switch
selectable auto detection and auto adjustment modes
•Rugged metal enclosure •Requires 5VDC/2A, AC
adapter included •Dimensions: 11⁄8" (H) x 85⁄8" (W)
23⁄4" (D)
MCM Part #
33-12500
ONLY
$119.00
High-Definition
Automatic Switcher
Back
•Hook up multiple video game systems, DVDs,
VCRs, and any other A/V device to any TV that
lacks the required number of AV inputs •Four inputs
allow you to automatically switch between desired
components •Features four audio/video, S-video, and
component inputs; composite, S-video and component
out •Component inputs provide ultimate picture
performance and are found on most quality TVs/
HDTVs and DVDs •Easy to hook-up and prevents
cable swapping issues that could result in the jacks on
the TV needing to be replaced.
MCM Part #
PH61150
Component Video Matrix
•High bandwidth and low crosstalk provides maximum
picture performance •View different sources on each
monitor •Separate RGB+audio inputs and outputs
•Source and monitor selection by RS232, RS-485 or
manual selection •Custom application for remote PC
control •Integrated rack mounts •Four rack spaces
•12Wpower consumption
MCM Part #
33-12100
33-12105
94
Matrix
4 x 4
8 x 8
Mfr. #
SW404HD
SW808HD
ONLY
$1141.00
1855.00
Audio/Video Selector
Four Input
A/V Switcher
•Unbalanced stereo
audio inputs and
output •Simultaneous
audio and video switching •Gold-plated connectors
•Solid-state audio and video switching •Switch noise
does not affect signal quality •Mfr. #EZ-AVX4X
MCM Part #
555-18824
ONLY
$24.99
ONLY
$163.61
www.MCMelectronics.com /1-800-543-4330
•Perfect for the
entertainment center
•Combines four different video devices (VCR, laser
disc player, etc.) into one output •Compatible with
both mono and stereo devices •Four audio/video
inputs, one audio/ video output •20Hz~10MHz
frequency range •Isolation 30dB minimum
MCM Part #
32-4420
ONLY
$21.62
Follow us on:
&
1
A/V Distribution
Audio/Video
A/B Input Source Switch Box
Back
Three-Way Audio/Video Switch Box
HDMI Scaling Media Center
•This six-input media center switch allows you to
scale all source inputs to 1080p and send them over a
single HDMI cable to your display •Perfect solution
for utilizing older A/V equipment or PCs with new
high-definition displays •Switch among six sources:
Two HDMI, two analog (composite, S-video, or
component), and two VGA Specifications: •HDMI
v1.3, HDCP (Input pixel clock rate: 25MHz~225MHz)
•Supports video up scaling to 1080p (pixel clock rate:
25MHz~165MHz) •3D Y/C separation comb-filter
•Aspect ratio: 4:3 or 16:9 •10 bits video processor
for analog to digital conversion •IR remote control
and manual control •Dimensions: 133⁄8" x 63⁄4" x 15⁄8"
•5VDC, 4A power supply (included)
MCM Part #
33-10800
Tabletop control box allows selection of multiple
A/V sources. Ideal when connecting several devices,
such as CCTV cameras, camcorders, VCRs, laser
disk players and satellite receivers to a single video
monitor or VCR. Accommodates video and left and
right audio, all connections are all RCA type female.
Metal case has non-skid rubber feet and stays securely
in place. Dimensions: 6.9" (W) x 2.2" (H) x 3.9" (D).
Sloped front, black color.
MCM Part #
50-6195
(1-5)
$12.99
(6-9)
$12.25
(10-up)
$8.49
Top
S–VHS A/V selector
switch for use with
DSS, DVD and other
video products with Y/C (S–VHS) outputs. Four
Y/C inputs for video and four RCA stereo inputs for
audio to one Y/C output and one RCA audio output.
Specifications: Band width, 20Hz~10MHz. Isolation:
30dB minimum.
Six-Way Video Selector
Tabletop video switcher provides independent selection
of up to six A/V sources, routing them to two different
destinations. Select from inputs such as a satellite
receiver, digital cable box, DVD player, DVR, VCR
or video game. Dual outputs, with independent
selectors, allow easy recording of one source, while
viewing another, or viewing of two different sources
on separate monitors. Inputs and outputs are standard
line level L/R audio, composite video, and S-video.
S-video connections are standard four-pin DIN
female, all others are RCA type female. Rugged metal
enclosure measures 13⁄4" (H) x 111⁄2" (W) x 51⁄4" (D),
including non-skid rubber feet. Note: Either composite
or S-video inputs may be utilized, but not both. This
selector will not convert from one video format to the
other. Passive device requires no power.
(4-up)
$42.50
Audio/Video
Switcher
Add additional
components to
your TV and
home theater system by providing additional A/V
inputs to your system. Four A/V inputs including
composite video and Y/C (S–video). Mfr. #SVS-14.
MCM Part #
80-3450
(6-9)
$8.99
ONLY
$280.16
Back
(1-3)
$44.99
MCM Part # (1-5)
50-6220 $9.99
(10-up)
$11.50
S–VHS A/V Switch
MCM Part #
50-7780
Compact control box allows selection
of two input sources into a single
auxiliary or tape input. Single push
button switch selects source “A” or
“B”. Ideal when connecting audio
devices such as CD players, VCRs,
laser disk players and satellite
receivers to home stereo equipment.
Output connection is made via
attached 5' lead, terminated with male
RCA type connectors, color coded
red and white. Input connections
are RCA type female. Rugged
metal enclosure is black in color,
dimensions: 3" (W) x 1" (H) x 3" (D)
including switch and connections.
ONLY
$26.77
MCM Part #
33-4135
ONLY
$19.99
Automatic A/B Line
Level Switch
This switching device
automatically selects
between two line level
sources to a single input.
L/R RCA female input/
output connections accommodate
left and right channels, making it
perfect for all consumer electronic devices. Default
input-A is selected when no signal is present. When a
signal is sensed at input-B, the selector automatically
switches to that input. A separate 12VDC, 100mA
signal is also provided to trigger other external
devices. Trigger sensitivity is fully adjustable from
10~100mV. Off delay (from B back to A after absence
of signal) is adjustable in eight steps from 0.5 seconds
to 10 minutes. This unit requires 12VDC. Optional
AC adapter available (#50-8362).
MCM Part #
50-8385
ONLY
$50.00
Input Source Switch
Boxes
Tabletop control box
Back
allows selection of multiple input sources. Ideal
when connecting several audio devices, such
as CD players, VCRs, laser disk players and satellite
receivers to home stereo equipment. Models available
to select from three, four or five sources. Internal PC
board design provides quiet, reliable operation. All
connections are all RCA type
female. Metal case has non-skid rubber feet
and stays securely fixed in place. Dimensions:
6.9" (W) x 2.2" (H) x 3.9" (D).
MCM Part # Positions
50-6170
Three
50-6175
Four
50-6180
Five
(1-5)
$12.99
13.99
14.99
(6-9)
$11.99
12.99
13.99
(10-up)
$11.50
12.50
13.50
Three-Way
Toslink Selector
Three-way rotary
selector expands
inputs/outputs
for optical audio
equipment. The unit has a positive locking mechanism
to ensure high integrity connections and optimum
light signal transfer. Features: •Expands input/output
options •Clear selection indicator •High integrity
connections •Suitable for either TOS-link or 3.5mm
optical connections •Ideal for connecting three pieces
of digital audio equipment to one optical input on an
amplifier •Dimensions: 1.2" (H) x 5.3" (W) x 4.3" (D)
MCM Part #
33-12735
www.MCMelectronics.com /1-800-543-4330
ONLY
$3.59
95
1
Audio/Video
A/V Distribution
A/V Senders
Wireless
Cable TV Kit
This unique kit
allows you to watch
cable or satellite TV
on a main television
and at the same time
send the signal to a
second TV. That TV
can then watch channels
independently of what
is being viewed on the
main TV. Features: •Send cable, satellite,
DVDs, TiVo, DIRECT TV® and more to
televisions anywhere in the home •Watch a different
channel than the main TV •No additional cable boxes
or video distribution required •No wires to run, no
holes to drill •Works through walls, floors, doors and
windows •Four selectable frequencies to eliminate the
interference •Extra receivers available for multiple TVs
MCM Part #
80-7265
#33-11800
5.8GHz
Wireless A/V Sender
Wireless A/V sender is capable
of wirelessly transmitting a
signal up to 300' (line of sight)
via the 5.8GHz wireless band. Unit is also capable of
transmitting IR signals up to 200'. Features: •Eight
selectable channels •Composite video and RCA L/R
audio inputs and outputs •Built-in dipole antenna
•Required power: 6VDC, 500mA (adapter included)
•Mfr. #06-081-001-08
MCM Part #
80-7046
ONLY
$95.78
ONLY
$207.50
VideoConnection
Wireless Audio/
Video Transceiver
2.4GHz Wireless
A/V Sender
Wireless A/V sender is
capable of wirelessly
transmitting a signal up to
300' via the 2.4GHz wireless
band. Unit is also capable of
transmitting IR signals up to
200'. Features: •Four selectable channels •Composite
video and RCA L/R audio inputs and outputs •Builtin dipole antenna •Required power: 6VDC, 500mA
(adapter included) •Mfr. #07-000-100-10
MCM Part #
80-7047
ONLY
$92.69
The VideoConnection
uses state of the art
2.4GHz technology
to transmit crisp
clear video and audio
signals through the walls and between the rooms
in a house. The hidden high gain antenna reduces
interference. Use the VideoConnection to send the
audio/video signals from a satellite receiver, VCR,
camcorder, DVD or other video source to a TV in a
different room.
MCM Part #
33-4725
ONLY
$114.33
#33-11832
Outdoor Digital Ready Directional Taps
Meets or exceeds frequency range and RF shielding
specifications for use with digital and broadband cable
services. Features: •Bandwidth: 5~100MHz •Can be
stand or pedestal mounted •Aluminum housing and
stainless steel hardware •Weather tight gaskets
MCM Part #
Two Output
33-11800
33-11802
33-11804
33-11806
33-11808
33-11810
33-11812
33-11814
33-11816
33-11818
33-11820
Four Output
33-11832
33-11834
33-11836
33-11838
33-11840
33-11842
33-11844
33-11846
33-11848
33-11850
Mfr. #
dB Loss
DMT-100.00-2-4
DMT-100.00-2-8
DMT-100.00-2-11
DMT-100.00-2-14
DMT-100.00-2-17
DMT-100.00-2-20
DMT-100.00-2-23
DMT-100.00-2-26
DMT-100.00-2-29
DMT-100.00-2-32
DMT-100.00-2-35
4dB
8dB
11dB
14dB
17dB
20dB
23dB
26dB
29dB
32dB
35dB
$20.59
20.59
20.59
20.59
20.59
20.59
20.59
20.59
20.59
20.59
20.59
DMT-100.00-4-8
DMT-100.00-4-11
DMT-100.00-4-14
DMT-100.00-4-17
DMT-100.00-4-20
DMT-100.00-4-23
DMT-100.00-4-26
DMT-100.00-4-29
DMT-100.00-4-32
DMT-100.00-4-35
8dB
11dB
14dB 17dB 20dB 23dB 26dB 29dB 32dB 35dB 23.47
23.47
23.47
23.47
23.47
23.47
23.47
23.47
23.47
23.47
B
A
C
E
D
ONLY
F
G
SATV/CATV Signal Distribution
A
B
H
Professional Trunk
Grade Splitters
C
Designed for L-band distribution
systems requiring high frequency,
high performance components.
Features: Bandwidth:
10Hz~2150MHz •Zinc die-cast hybrid case
D
Indoor Digital Ready Splitters
Indoor Splitters
Performance to 1000MHz. 2, 3, 4 and 8 way models.
Die-cast housing. RF shielding. Mounting tabs and
grounding blocks.
Fig.
A
B
C
D
96
MCM Part #
33-2900
33-2905
33-2910
33-2915
Description
2-way
3-way
4-way
8-way
(1-9)
$1.03
1.86
3.42
6.86
(10-up)
$0.98
1.73
3.42
6.74
Meets or exceeds frequency range and RF shielding
specifications for use with digital and broadband cable
services. Features: •Bandwidth: 5~100MHz •Mounting
tabs •Grounding blocks •Heavy-duty die-cast
housing
MCM Part #
33-11700
33-11705
33-11710
33-11715
33-11720
Mfr. #
DGS-2
DGS-3
DGS-3B
DGS-4
DGS-8
Description
2-way
3-way
3-way balanced
4-way
8-way
ONLY
$3.08
4.11
4.11
4.62
7.71
www.MCMelectronics.com /1-800-543-4330
Fig. MCM Part #
Mfr. #
Single Port Power Passing
A
33-11860
LPD-2
B
33-11870
LPD-4
C
33-11875
LPD-6
D
33-11880
LPD-8
All Ports Power Passing
E
33-11861
LPD-2P
F
33-11865
LPD-3P
G
33-11871
LPD-4P
H
33-11876
LPD-6P
J
33-11881
LPD-8P
J
Description
ONLY
Two-way
Four-way
Six-way
Eight-way
$4.62
8.74
16.47
19.04
Two-way
Three-way
Four-way
Six-way
Eight-way
5.65
7.71
9.77
16.98
19.56
Follow us on:
&
1
A/V Distribution
#33-11730
Solder Back
Indoor/
Outdoor
Directional
Couplers
and Taps
#33-11752
Indoor Digital Ready
Directional Taps
Meets frequency range and
#33-11774
RF shielding specifications
for use with digital and broadband cable services.
Features: •Bandwidth: 5~100MHz •Mounting tabs
•Grounding blocks •Heavy-duty die-cast housing
MCM Part #
Single Output
33-11730
33-11732
33-11734
33-11736
33-11738
33-11740
33-11742
33-11744
33-11746
33-11748
Two Output
33-11752
33-11754
33-11756
33-11758
33-11760
33-11762
33-11764
33-11766
Four Output
33-11774
33-11776
33-11778
33-11780
33-11782
33-11784
33-11786
Mfr. #
Attenuation
ONLY
DGT-6
DGT-8
DGT-10
DGT-12
DGT-14
DGT-16
DGT-18
DGT-20
DGT-24
DGT-30
6dB
8dB
10dB
12dB
14dB
16dB
18dB
20dB
24dB
30dB
$3.08
3.08
3.08
3.08
3.08
3.08
3.08
3.08
3.08
3.08
DGT-2-8
DGT-2-10
DGT-2-12
DGT-2-14
DGT-2-16
DGT-2-18
DGT-2-20
DGT-2-24
8dB
10dB
12dB
14dB
16dB
18dB
20dB
24dB
3.59
3.59
3.59
3.59
3.59
3.59
3.59
3.59
DGT-4-10
DGT-4-12
DGT-4-14
DGT-4-16
DGT-4-18
DGT-4-20
DGT-4-24
10dB
12dB
14dB
16dB
18dB
20dB
24dB
6.17
6.17
6.17
6.17
6.17
6.17
6.17
A
B
C
RFI Splitters
•For use in applications where additional shielding is
needed •100dB case design exceeds FCC requirements
for RF shielding •25% more zinc content than
standard splitters •Case thickness increased by 50% to
obtain very good RFI performance •Mounting tabs
with screws and grounding block •5MHz~1000MHz
frequency response
Fig.
A
B
C
MCM Part #
33-2130
33-2135
33-2140
Type
2-way
3-way
4-way
(1-9)
$2.19
3.11
3.55
(10-up)
$1.94
2.58
3.13
75ohm Power Blocked Terminator
Standard “F” connector. Sold individually.
MCM Part #
33-11885
ONLY
$5.14
Audio/Video
A
B
Blonder Tongue offers a complete line of professional
quality indoor/outdoor couplers and tapoffs covering
frequencies up to1000MHz. These products are
available in both an L or T style cases. The variety of
loss values offered guarantees that they have the right
product for your application. These products feature
a durable outdoor rated soldered back, cast housing,
which shields against EMI and RFI disturbances.
MCM Part #
Loss (dB)
A. L Style-SCW models
33-2941
4
33-2946
6
33-2951
9
33-2956
12
33-2961
16
33-2966
20
33-2967
24
33-2968
27
33-2969
30
B. In-Line Style-SRT models
33-2971
4
33-2976
6
33-2981
9
33-2986
12
33-2991
16
33-2996
20
33-2997
24
33-2998
27
33-2999
30
(1-9)
(10-up)
$3.24
3.24
2.70
3.24
3.25
3.24
2.59
2.59
3.11
$2.90
2.90
2.42
2.90
2.91
2.90
2.35
2.35
2.82
3.08
3.08
2.70
2.70
3.08
2.70
3.08
3.08
2.59
2.80
2.76
2.42
2.42
2.76
2.42
2.76
2.76
2.35
Designed for use in a headend to combine the
output of up to 32 single channel devices such
as modulators and processors. Features: •Frequency:
5MHz~1000MHz •1RU rackmount chassis •-20dB
front panel test port •RFI shielded •Dimensions:
1¾" (H) x 19" (W) x 8" (D)
Mfr. #
HPC-8
HPC-12
HPC-24
HPC-32
Inputs
8
12
24
32
ONLY
$80.33
84.45
96.81
108.15
Splitter/Combiner
The Channel Plus
bi–directional
splitter/combiners
provide a 1GHz\
bandwidth and are ideal
for antenna and coaxial
cable operations. It can be used to split a signal from a
source or combine signals from multiple sources onto
one coax run.
Insertion MCM Part # Description Loss 2512
2–way 3.5 dB MCM Part #
33-3070
ONLY
$749.00
Combiner
Headend Passive Combiners
MCM Part #
33-11920
33-11905
33-11910
33-11915
Agile Audio/Video Modulators
The AM Series includes professional quality, agile
audio/video modulators. These units provide audio
and video modulated RF carrier on any channel
in the 50~550MHz frequency range. Agile channel
selection permits on-the-fly channel changes and
reduces the need for large inventories of channelized
products. These modulators have a wide range of
standard and optional features that make them very
suitable for advanced SMATV and CATV systems.
The AM Series takes baseband audio and video
and modulates these signals onto any channel in
the 50~550MHz frequency range. Featured options:
4.5MHz audio input, video input, BNC connector,
sub band output, video AGC, spectrum inversion,
balanced audio input, 600ohm, composite video and
4.5MHz audio input, Z-TAC interface, digital
control-parallel, digital control-serial RS-232.
Includes all these options except sub-band
output. Specifications: RF: •Frequency range:
50~450MHz •Frequency range: 50~550MHz
•Channels: VHF, CATV (STD, HRC, IRC)
•Video input level: 1.0V p-p •Frequency
response: fv -0.5MHz~fv +4.2MHz: 1.0MHz
•Video signal-to-noise ratio: 60dB •Input
impedance: 75ohm •Audio input level: 140mV RMS
•Frequency range: 20Hz~20KHz •Input impedance
standard: 10Kohm, unbalanced General: •Power
requirements: •Voltage: 117VAC, ±10% •Frequency:
60Hz •Mfr. #AM-60-550
DC & IR
Passing Yes The ZHC-12 is a professional quality, passive
output. This unit is designed for use in headends
to combine the outputs of multiple modulators and
processors. The ZHC-12 has twelve (12) broadband
input ports and one combined output port. This
combiner features high isolation between ports
due to an integrated directional coupler design.
The input ports of the ZHC-12 are broadband,
accepting signals in the 50~450MHz frequency range.
Specifications: ZHC-12 RF: •Number of inputs:
12 •Frequency range: 50~450MHz •Insertion loss:
16dB •Isolation: 40dB •Impedance-all ports: 75ohm
Connectors (rear panel): •RF input(s): “F” type,
female •RF output: “F” type, female •Test port (front
panel): “F” type, General: •Power requirements:
•Voltage: 117VAC, ±10% •Frequency: 60Hz •Power:
10W Connectors (rear panel): •RF input(s): “F” type,
female •RF output: “F” type, female •Test port (front
panel): “F” type, female
MCM Part #
33-2820
Mfr. #
ZHC-12
ONLY
$76.21
ONLY
$5.65
www.MCMelectronics.com /1-800-543-4330
97
1
Audio/Video
A/V Distribution
Voltage Blocking Coupler
SATV/CATV Signal Distribution
A
B
•Blocks DC and low
frequency AC power
•Solid brass body with
nickel plating •Female to
male fittings •22 gauge spring
steel center pin •1~1000MHz
bandwidth •16dB return loss •0.3dB insertion loss
C
MCM Part #
33-0020
High Frequency RFI Splitters
DIRECTV compatible high frequency performance
to 3GHz. •Tin-plated zinc die-cast housing with
soldered back to achieve RFI -130dB •Waterproof
and airtight up to 30 P.S.I. with 4.55mm grounding
hole and stainless steel screws •Low thru loss and
high isolation with patent pending 360° insert pin.
Bandwidth: 5MHz~3000MHz.
®
Fig.
A
B
C
MCM Part #
33-10245
33-10246
33-10247
Description
2-way
3-way
4-way
(ea.)
$3.63
4.11
4.62
(2-up)
$2.45
3.97
4.43
D
E
C
B
A
Fig MCM Part #
1 Port Passive
A
33-4350
B
33-4355
C
33-4360
D
33-4365
E
33-4370
All Ports Passive
A
33-4375
B
33-4380
C
33-4385
D
33-4390
E
33-4395
Description
(1-9)
(10-up)
2-Way
3-Way
4-Way
6-Way
8-Way
$6.44
8.74
9.77
18.01
18.53
$6.17
7.88
8.95
16.68
17.26
•75ohm splitters for use with cable, antenna, satellite,
broadband, and other RF distributions •High
frequencies available for use with digital satellite and
broadband systems •All ports power passing
Frequency
MCM Part #OutputsRange (1-9)(10-24) (25-49) (50-up)
33-10955 2 5~1000MHz$0.49 $0.46 $0.42 $0.38
33-10956 3 5~1000MHz 0.93 0.89 0.81 0.73
33-10957 4 5~1000MHz 1.03 0.98 0.91 0.81
33-10960 2 5~2300MHz 1.54 1.47 1.35 1.22
33-10961 3 5~2300MHz 2.07 1.97 1.81 1.64
33-10962 4 5~2300MHz 2.59 2.48 2.38 2.32
75ohm TV
Interference
Filters
2-Way
3-Way
4-Way
6-Way
8-Way
6.44
8.72
9.77
18.01
18.53
6.17
7.79
8.95
16.92
17.26
Mini hi-frequency splitter saves
space in confined areas. DC
passive one port. Attached
plastic cable channel provides
neat installations. Bandwidth:
5~2250MHz. Measures: 2" x 2" x 1"
(port to port).
(1-9)
$5.65
(10-up)
$5.24
•Zinc die-cast mounting •Provides
connection to stereo tuner for
MTV and other FM broadcasts
usually available on cable TV lines
98
(1-9)
$2.17
(10-99)
$2.05
(10-99)
$2.58
(100-up)
$2.03
Audio from the FM band
can overcome the audio on
adjacent television channels
6 and 7 and harmonics of
the FM carrier. The FM trap eliminates the entire FM
band from 88 to 108MHz reducing video noise and
audio interference.
(1-49)
$2.80
(50-up)
$2.48
Cable Modem
Isolator
CATV FM Tapoff
MCM Part #
33-350
(1-9)
$3.01
FM Trap
MCM Part #
33-341
Mini Hi-Frequency Splitter
MCM Part #
33-4860
•Used in cable or
antenna systems to
remove interference affecting picture quality
MCM Part #
33-0070
(100-up)
$1.97
Separates and
isolates
noise/EMI caused by
higher cable modem
transmission signals.
Improves internet
download reliability
and reduces cable
modem “sync” problems. Easily plugs into coax wall
jack allowing dedicated runs to a cable modem and TV
tuner. •Frequency range: 10~770MHz •Insertion loss:
<5.0db.
MCM Part #
33-10395
(10-up)
$3.39
Low Pass Filters
RF Splitters
High Frequency Horizontal Satellite Splitters
High frequency splitters used for satellite and DSS
applications. Power passive to operate in–line amps
and multi-switches. Bandwidth: 5MHz~3000MHz.
(1-9)
$3.84
ONLY
$4.10
www.MCMelectronics.com /1-800-543-4330
A ChannelPlus low pass filter is used on systems
when the broadband feed is supplied by a CATV
service. The filter removes all CATV channels above
the pass band, allowing insertion of locally generated
channels. In addition, the filters remove cable system
noise which degrades the picture quality of the locally
generated channels.
MCM Part #
LPF-470
LPF-600
LPF-750
Pass Band (MHz)
40~470MHz
40~600MHz
40~750MHz
ONLY
$25.15
38.01
40.15
Fixed MiniType Attenuator Pads
Features: Nickel-plated, solid
brass body, monolithic ceramic
printed circuit board, ensuring rugged construction,
etched glaze-type resistors provide ±5% accuracy and
excellent return loss, small 1.375" size, 22-gauge spring
steel center pin, female to male fitting, not DC passive.
Specifications: •Bandwidth: 100KHz~1750MHz
•Return loss: 20dB typical •Accuracy: ±5%
MCM Part #
33-2750
33-2755
33-2760
33-2765
33-2770
33-2775
33-2780
Description
3dB
6dB
8dB
10dB
12dB
16dB
20dB
(1-9)
$1.44
1.44
1.44
1.44
2.12
1.44
1.44
(10-up)
$1.34
1.10
1.10
1.34
1.63
1.10
1.10
Ground Isolation
Transformer
5MHz~2.4GHz
bandwidth for use in antenna,
cable television and satellite
systems. Reduces the effects of ground loops such as
herringbone, beat and audio hum.
MCM Part #
33-8700
(1-9)
$8.99
(10-up)
$8.19
Double Galvanic
Lightning Arrester
Protects your valuable
video equipment from
voltage surges caused
by lightning strikes
to or near antennas
or cable television
lines. Frequency
range: 5MHz~1GHz.
MCM Part #
33-8695
(1-9)
$6.68
Follow us on:
(10-up)
$6.42
&
1
A/V Distribution
Audio/Video
Signal Amplifiers
Broadband Amplifiers
The BIDA Series are
professional quality,
broadband, two-way capable,
indoor hybrid distribution
amplifiers that are designed
for RF distribution systems,
such as apartment complexes,
hospitals, schools, prisons,
hotels, and a wide variety
of similar applications.
The BIDA Series is ideal for
multi-channel RF distribution
systems whose input source is a “cable drop” or the
output of a MATV/SMATV/CATV headend.
Additionally, the BIDA Series may be used as the
launch amplifier in a distribution network. These
amplifiers use dual push–pull hybrid modules,
capable of delivering high output levels with low
distortion, even in systems with over 100 channels
of programming. Power doubling models can be
cascaded together with lower distortion resulting
than the push–pull amplifiers allowing the system to
maintain higher signal integrity. The gain and slope
controls are designed between the hybrid modules for
optimum noise figure, input return loss and output
capability. Test ports for both the input and output are
provided for testing signal levels without interrupting
service. The BIDA Series come in a rugged, aluminum
chassis that provides exceptional heat dissipation. This
allows the BIDA Series to be operated at high ambient
temperatures with no degradation of performance or
reliability. The combination of features and durable
construction ensures that the BIDA Series will provide
years of reliable, trouble-free service.
Bandwidth
MCM Part #MHz
33-7815 49~550
33-7820 49~750
33-7850 49~860
33-7855 49~860
Gain
dB
50
32
44
44
Description
Push–pull
Push–pull
Push–pull
Power doubling
ONLY
$623.15
592.25
689.07
727.18
#33-8745
Broadband Distribution Amps
#33-8760
For broadband applications up to 1GHz including
cable television and digital television. Suitable for
medium sized distribution networks including homes
and small condominium complexes. High gain low
noise amplifier with built–in FM trap. Specifications:
Frequency range 40~1000MHz. FM trap -20dB.
Power: 120VAC.
MCM Part #Outputs
33-8745
1
33-8755
2
33-8760
4
Gain Gain Adjust (1-9) (10-up)
36dB
18dB
$34.49 $31.05
15dB
10dB
26.25 24.96
11dB
–
29.34 27.45
RF Distribution Amplifiers
Professional quality broadband distribution amplifiers
are ideal as a headend launch amplifier or distribution
amplifier for any MATV, SMATV, or CATV
application. Features: •19" rack mount chassis
•Variable gain and slope controls •Dual push-pull
hybrid modules •Test ports for both the input and
output •Dimensions: 19" (W) x 1¾" (H) x 51⁄8" (D)
MCM Part #
33-11925
33-11930
33-11935
33-11940
Mfr. #
5500-53
5500-55
5500-73
5500-83
Frequency
dB Gain ONLY
47MHz~550MHz 30dB$458.35
47MHz~550MHz 50dB 540.75
47MHz~750MHz 30dB 545.90
47MHz~860MHz 30dB 596.37
ACA-30-75R Antenna
or CATV Distribution
Amplifier
Professional quality
broadband indoor hybrid
distribution amplifier is
designed for RF distribution
systems such as apartment
complexes, hospitals, schools,
prisons and hotels. The
ACA 30-75R amplifier has
a flat 30dB of operational
gain, which is variable using a built-in gain control,
plus a passive return path, making it suitable for
all interactive digital cable systems. Features: •RF:
Frequency range: 47~550MHz •Forward gain: 32dB
•Gain control range: 15dB •Slope control range: 10dB
•Impedance all ports: 75ohm
MCM Part #
33-2876
Multiple Dwelling Amplifier
Specifications: RF: •Frequency range: 47~550MHz
•Gain: 32dB •Noise figure(a): 8.0dB •Output level:
+44dBmV •Gain control range: 15dB •Slope control
range: 10dB •Impedance all ports: 75ohm General:
•Power requirements: •Voltage(d): 117VAC, ±10%, 24
•Frequency: 60Hz •Power: 13W •Mfr. #ACA 30-550
MCM Part #
33-2875
ONLY
$205.99
50MHz~1HGz
Broadband
Amplifier
Ultra low noise
amplifier employs
high output push-pull design, with frequency range
of 50MHz~1GHz, providing up to 34dB gain.
Additionally, a passive 5~42MHz return path enables
use with cable TV systems that utilize interactive
digital boxes and broad band internet service. Variable
gain and tilt adjustments allow installer to compensate
for a wide range of cable lengths. Features: •Wide
forward frequency range: 50MHz~1GHz •Ultra low
noise figure •Push-pull SMD strip line circuit design
•-20dB input and output test •115VAC operation,
no space consuming AC adapter Specifications:
•Specifications Forward frequency range:
54~1000MHz •Forward gain: 34dB •Gain adjustment
range: 15dB •Max input level +5 dB •Max ouput level:
39dB •Return frequency range: 5~42MHz •Return
insertion loss: 2.5dB •Power requirements 117VAC, 60
Hz, 6 W •Dimensions 2" (H) x 3-3/8" (W) x .8" (L)
MCM Part #
33-2675
(1-9)
$160.68
(10-up)
$152.44
Model #
5770
ONLY
$309.00
Bi-Directional
Cable Drop Amplifier
Take advantage of this limited opportunity on this
high performance signal amplifier from Holland
Electronics. Designed for use as a drop amplifier on a
distributed cable system, it is suitable for any television
application including indoor or outdoor antennas. Its
die cast housing is hermetically sealed and completely
suitable for outdoor use. Included AC adapter can be
connected directly to the unit, or remotely powered
over the coax cable with the optional power inserter.
Return path amplification is provided, making this
suitable for broadband, digital cable and similar
environments. Features: •Adjustable gain in both
directions •Surge protected •Integral ground lug
•Forward path bandwidth: 54~1,000MHz •Adjustable
gain: -5~+15dB •Max output: 25dBmV •Return path
bandwidth: 5~42MHz •Adjustable gain: -8dB ~ 10dB
•Maximum input: 45dBmV •Dimensions: 1" (H) x 4.5"
(W) x 2.5" (W) •Limited quantities
MCM Part #
Mfr. #
30-2400
HCDA-1FRA-AG
30-2405
HCDA-PI
30-2406
VBC
Description
Bi-directional amplifier
Remote power inserter
DC voltage block
ONLY
$19.99
3.49
1.99
High Frequency
Ground Blocks
High frequency ground blocks have extended
frequency capacity to 2.4GHz making them perfect for
satellite and digital applications. Nickel plated finish to
resist effects of the weather.
MCM Part # Description (1-9)
33-7705
Single
$1.49
33-7710
Dual
2.07
www.MCMelectronics.com /1-800-543-4330
(10-99)
-
$2.05
(100-up)
$1.97
99
1
Audio/Video
A/V Distribution
Signal Amplifiers
#30-2124
#30-2125
HDTV Adjustable
Distribution Amplifier
ZTA-35
Specifications: RF: •Frequency range: 54~216MHz,
470~806MHz •Input level min: -7.0dB(LB/FM),
-6.0dB(HB), -6.8dB(UHF) •Input level max: +14dB,
36dB(LB/FM), 35dB(HB), 37dB(UHF) •Noise figure:
6.0dB(LB/FM), 7.0dB(HB), 6.2dB(UHF) •Output
level max: 49dBmV •Gain control range: 18dB •FM
trap depth (95~108MHz): -18 •Impedance all ports:
75ohm General: •Power requirements: Voltage:
117VAC, ±10% •Frequency: 60Hz •Power: 15.0W
•Mfr. #ZTA-35
MCM Part #
33-2860
ONLY
$155.53
•Instant cable provider signal strength indicator
•Eliminates screw-on attenuators •Extends
precise signal strength beyond typical “no-loss”
distribution amplifiers •Specifically designed for
HDTV broadcasting (VSB8 & QAM64) •Meets and/
or exceeds cable modem and PPV requirements
•Protects equipment against voltage insertion •Eight
independent adjustable attenuators (range: 0~40dB)
•Nominal gain per output: 3dB+ •Forward bandwidth:
54~1.2GHz •Return bandwidth: 5~42MHz at 5dB
gain •Maximum output on all 8 ports: +25dBmV/CH
•Typical noise figure: < 4.5dB •Surge protection on all
8 ports: 6KV/3KA •Mfr. #70-0039
MCM Part #
33-11045
ONLY
$207.03
#DA-550BID
High Headroom
Distribution Amplifier
Push-Pull
Amplifiers
The CA-30 is
a high-quality
push-pull amplifier
producing signals
with extremely low distortion and harmonic
content. The CA-30 enclosure uses a black anodized
aluminum extrusion to assure reliable heat sinking
and corrosion resistance. Features: •Wide frequency
range: 54MHz~550MHz, 30dB gain, adjustable slope
control, adjustable gain control, input and output test
points, designed for CATV apartment distribution
systems Specifications: •Bandwidth: 54~550MHz
•Gain: 30dB •Gain adjust range: 0~8dB •Power
requirements: 115VAC, 60Hz, 4W •Slope: 0~8dB
variable •Noise figure: CA-30, 5.0dB
MCM Part #
33-2670
(1-9)
$139.05
(10-up)
$131.84
Prograde 1 GHz
Bi-Directional RF
Amplifier
•Compatible with
HDTV and cable
modems •1GHz bandwidth bidirectional amplifier
•High pass filter: 54MHz~1GHz reduces cross mod
•Low pass filter: 5MHz~40MHz in return path •20dB
forward gain with 20dB adjustable attenuator •Mfr.
#6001
MCM Part #
33-11085
ONLY
$61.79
DA-520A
The DA-520A is a
bi–directional amplifier
providing 20dB of forward gain and 0dB reverse gain.
Specifications: Bandwidth: 54~806MHz. Gain: 20dB
+/- 1dB.
MCM Part #
DA-520A
100
ONLY
$70.69
The DA-550 series is
designed with the highest
headroom available in
a distribution amplifier.
Traditional panels are
not designed to handle
the radical variations in
signal strengths that have
come about with HDTV.
New technologies such
as HDTV create special
problems for current video
distribution panels. The
DA-550s can handle an
#DA-550HHR
extremely wide range of input signals
from today’s NTSC and tomorrow’s digital TV.
With outputs to eight televisions, coax runs up to
150', three inputs, one from a CATV or antenna and
two from modulators, the DA-550 is the heart of a
multi-room distribution system. The DA-550BID
offers a 5~42MHz return path for bi-directional
communication for use with cable modems and
pay-per-view applications. The DA-550HHR is used
with high performance antenna applications for off
air digital and NTSC signals. Additional features: IR
engine, remote power and expandable outputs.
MCM Part #
DA-550BID
DA-550HHR
Distribution Amplifiers
•Commercial grade distribution amplifiers can be used
for HDTV, CATV, off-air, analog, and digital RF
distribution •Weather sealed housings •Average noise
figure: 2.8dB •50~1000MHz
MCM Part # Mfr. #
30-2124
3410
30-2125
3412
30-2130
3414
30-2135
3418
Description
1-way
2-way
4-way
8-way
Gain
15dB
11.5dB
8dB
4dB
ONLY
$36.55
43.76
48.91
62.82
BiDirectional
CATV
Amplifiers
Digital
amplifiers with
return path for
use with CATV convertors (pay per view) and cable
modems. Soldered back ensures isolation and signal
integrity. Specifications: Bandwidth: 54~1000MHz.
Noise figure: 3.5dB. Power: 12VDC, 250mA via
included adapter (using “F” cable).
MCM Part #Forward Gain Reverse Gain (1-9) (10-up)
33-7110
15dB
0dB (Flat)
$44.79 $40.70
33-7111
15dB
10dB
49.94 44.68
ONLY
$183.17
190.49
Broadband Structured
Wire RF Amplifiers
15dB RF Amplifier
Compatible with the
market leader of structured
wiring panels, these
5~1000MHz, DOCSIS®
compliant amplifier modules are the ideal drop-in
replacement for CATV in-home signal distribution.
Improve your multimedia application with the latest
broadband technology for HDTV QAM signals.
Features include a durable, salt-spray-resistant
housing, weather-sealed “F” ports, and exceptional
surge performance.
MCM Part #
33-10225
33-10226
#30-2135
#30-2130
Description
6 output
8 output
Gain
+6.5dB gain
+10.0dB gain
ONLY
$91.66
104.03
www.MCMelectronics.com /1-800-543-4330
Specifications:
RF: •Frequency
range: 54~220MHz,
470~900MHz •Input
level min: -7.0dB
•Input level-max:
+18dB •Gain: 16dB
(50~22), 12dB (470~800), 10dB (800~900)
•Noise figure: 3.0dB (VHF), 4.0dB (UHF)
•Output level max: +44dBmV •Impedance all ports:
75ohm General: •Power requirements: •Voltage:
117VAC, ±10% •Frequency: 60Hz •Power: 4.2W
•Mfr. #ZTA-15
MCM Part #
33-2850
(1-9)
$18.53
Follow us on:
(10-up)
$17.49
&
1
A/V Distribution
UHF/VHF/FM 36dB
Amplifier
Features:
•Low noise
•Two switchable
FM traps •Separate gain controls •AC power
indicator •50dB output capability •-20dB
monitor output •Fuse protected Specifications:
•Bandwidth: 54MHz~108MHz, 174MHz~216MHz,
470MHz~812MHz •Gain: VHF, 31dB; UHF, 36dB
•75ohm input/output •Power requirements: 115VAC;
60Hz •Dimensions: 83⁄4" (L) x 17⁄8" (H) x 33⁄4" (D) •Fuse
protected
MCM Part #
33-0890
(1-9)
$98.87
#33-2840
(10-up)
$91.64
Audio/Video
ZTA-25
Specifications: RF:
•Frequency range:
470~890MHz •Input
level min: -8.5dB •Input
level max: +22dB •Gain:
25dB(LB/FM), 22dB(HB), 18dB(UHF) •Noise
figure: 5.0dB(VHF), 7.0dB(UHF) •Output level
max: +47dBmV •FM trap depth (95~108MHz):
-25 •Impedance all ports: 75ohm General: •Power
requirements: Voltage: 117VAC, ±10% •Frequency:
60Hz •Power: 3.0W •Mfr. #ZTA-25
MCM Part #
33-2855
(1-9)
$24.19
(10-up)
$22.96
#33-2845
10dB Micro Amplifier
Broadband
Distribution Amplifiers
The ZCM Series includes professional quality,
broadband distribution amplifiers, designed for
special purpose applications in the MATV, SMATV,
private and wireless cable markets. These amplifiers
cover the 50~550MHz frequency range and provide
low noise amplification at a reasonable cost. Two
models are available with either 10 or 20dB of gain,
each capable of accepting a relatively high input
level. Specifications: ZCM-101 RF: •Frequency
range: 50~550MHz •Gain: 10dB •Noise figure:
3.5dB •Impedance-all ports: 75ohm General power
requirements: •Voltage: 117VAC, ±10% •Frequency:
60Hz •Power: 1.2W •Connectors (top panel): •RF
input: Type “F”, female RF output: Type “F”, female
ZCM-201 RF: •Frequency range: 50~550MHz •Gain:
20dB •Noise figure: 3.5dB •Impedance all ports:
75ohm General power requirements: •Voltage: 117VAC,
±10% •Frequency: 60Hz •Power: 1.4W •Controls (top
panel): Tilt: Var. Control •Connectors (top panel): RF
Input: Type “F”, female •RF output: type “F”, female
MCM Part #
33-2840
33-2845
Mfr. #
ZCM-101
ZCM-201
(1-9)
$11.98
17.50
(10-up)
$11.36
16.25
10dB micro amplifier with
45~1000MHz bandwidth. Soldered
back ensures 130dB RFI
shielding. Heavy-duty tin
plated zinc housing.
Specifications: Noise
figure: 7dB. Power:
12VDC, 100mA. via
included adapter (using
“F” cable).
MCM Part #
33-7125
(1-9)
$23.16
(10-up)
$16.07
VHF Gain
23dB
16dB
UHF Gain ONLY
26dB
$73.12
23dB
64.88
#33-917
#33-910
#33-915
In-Line Amplifiers
25dB RF Signal Amplifier
•Bandwidth: 50~860MHz •For indoor use only
•Operates on 12VDC, 200mA (adapter included)
MCM Part #
30-2167
ONLY
$11.99
Specifications: •Bandwidth:
5~950MHz •Gain: 11dB
•Maximum input: 20dB
•Maximum output: 31dB •Noise
figure: 4dB •Power requirements:
15VDC •Dimensions: 21⁄2" (L) x 5⁄8" (dia) #33-910 DC
Passive: For satellite 70MHz in-line amplification
when power dividers, low gain LNAs and down
convertors require additional gain. #33-917 NonPassive: For MATV/CATV applications when antenna
preamplification and line amplification is required.
#33-915 Power Supply: Provides power supply
(15VDC) and diplexer for #33-917 and 33-910.
MCM Part #
33-917
33-910
33-915
•50MHz~550MHz
bandwidth •1~3dB gain
•117VAC power required
•One input, four outputs
•Dimensions: 31⁄2" (W) x 21⁄4" (H) x 11⁄2" (D)
(1-9)
$14.41
The Titan range of mast
mounted amplifiers has
been completely reengineered and updated.
These amplifiers
represent the
ultimate in
preamplifier
performance. They are designed
for use as an ultra low noise, ultra high gain
preamplifier for deepest fringe applications and
MATV headend applications. Their very high signal
handling also makes them suitable for use as a mast
mounted, ultra low noise distribution amplifier for use
in small MATV systems. Both models feature 75ohm,
input and output connections in line with modern
headend engineering practice. Models 7777 and
7778 cover both VHF and UHF bands with separate
amplification in each band for maximum signal
handling. They may be configured for either separate
or combined VHF and UHF inputs. They include a
switchable FM trap.
MCM Part # Mfr. #
33-8960
7777
33-8965
7778
Four-Way Amplified
Coupler
MCM Part #
33-1475
TITAN 2TM Mast Mounted
Preamplifiers
Type Non-Passive Amp
DC Passive Amp
Power Supply
(1-9)
$14.79
7.71
16.80
(10-up)
$12.56
7.25
15.04
(10-up)
$12.99
UHF/VHF/FM 25dB
Amplifier
ClearStream
Pre-Amplifier Kit
Outdoor Mast
Mounted Amplifier
Features: •Low noise
•Lightning protection
•AC power indicator
•Switchable FM trap
•Low cost Specifications: •Bandwidth: 54~900MHz
•Gain: VHF, 25dB; UHF, 22dB •Maximum input:
VHF, 18dB; UHF, 16dB •Maximum output: 40dB
(54~800MHz) •Noise figure: VHF, 5dB; UHF, 7dB
•75ohm input/output •Power requirements: 115VAC;
60Hz •Dimensions: 57⁄8" (W) x 15⁄8" (H) x 3" (D)
This powerful UHF/VHF
antenna signal amplifier is designed to overcome
signal loss related to long cable runs, splitters, and
junctions. While an amplifier will not create a signal,
it will increase its power and minimize disruptions.
Kit includes •Mast mount amplifier •110VAC
power inserter •6' coaxial cable Frequency range:
•40~862MHz •18db gain •Mfr. #PA18.
•Commercial grade
low noise antenna preamplifier designed and
optimized for digital TV reception •Max gain: 18.4dB
VHF, 17.3dB UHF •Frequency range: Amplifies
174MHz~216MHz and 470MHz~700MHz •Ultra low
noise figure: 1.7dB VHF, 2.0 dB UHF •High overload
resistance •75ohm/“F” connector output and input Kit
includes: •Mast mount amp •Power inserter •Two 3'
coaxial cables
MCM Part #
33-0450
MCM Part #
30-2091
MCM Part #
30-2120
(1-9)
$29.34
(10-up)
$28.47
ONLY
$46.99
www.MCMelectronics.com /1-800-543-4330
ONLY
$79.99
101
1
Audio/Video
Signal Amplifiers
A/V Distribution
Television Antennas
Extended Range
Multi-Directional
UHF Antenna
Closed
Clearstream Convertible
Indoor/ Outdoor Antenna
UHF/VHF Antenna
Mast-Mount Combiner
•All-weather antenna combiner merges the signals
from a UHF antenna with a VHF antenna on the
same down lead •Ideal for FM reception and markets
with high band VHF HDTV channels •Threaded
“F” connectors •Mast-mount weatherproof housing
•Adjustable mast clamp •75ohm output
MCM Part #
30-2113
ONLY
$18.79
MCM Part #
30-2300
In-Line Surge
Protector
Protect your cable
modem, tuner,
convertor, decoder, and
satellite receiver from
power surges and spikes caused by lightning strikes.
Plugs directly into coax line. Specifications: •Frequency
range: 5~2,400MHz •Insertion loss: 1.5dB max •Max
surge current: 5000A
MCM Part #
33-10400
ONLY
$7.20
High Isolation Switches
•Three–way coaxial A/B/C
switch •Use for antenna,
CATV or VCR •Greater
than 65dB isolation through
550MHz
and 50dB through 900MHz
MCM Part #
33-1490
33-1485
Description
A/B/C
A/B
(1-9)
$8.23
7.20
(10-up)
$7.41
6.48
•You’ll never have to leave the comfort of your chair
with this infrared remote control video switch •Allows
you to switch between two 75ohm inputs (cable,
antenna, satellite or dual cable systems) •75ohm
output (TV) •AC adapter: 120VAC/12VDC, 100mA
included •5MHz~900MHz bandwidth •89dB isolation
•UL listed •Remote requires two “AA” batteries not
included
MCM Part # Description
32-4425
Switch
32-4426
Replacement remote
Model #
C1C
ONLY
$39.99
ClearStream™
Outdoor UHF/VHF
HDTV Antenna
The ClearStream C2V
delivers TV signals from widely
located broadcast towers and offers flexible aiming
characteristics with an extremely wide beam width
of 70 degrees. Features: •Range: 50+ miles •Gain: 3.1
dBi at 216 MHz – VHF, 10.4 dBi at 670 MHz – UHF
•Consistent gain through the entire UHF and VHF
DTV channel spectrum •Optimized for UHF and
VHF HDTV signals •Great for indoor, outdoor and
attic use •Dimensions: 20" (H) x 35.5" (W) x 6.5" (D)
MCM Part # Description
30-2305
Antenna with 20" mount
30-2310
Antenna with 20" mount and 30' cable
MCM Part #
30-2320
(ea.)
$31.92
8.94
(2-up)
$27.53
-
The Micron’s efficient,
compact design offers
excellent gain across
the HDTV spectrum
and is superior to most
existing compact antennas for receiving UHF DTV
signals. The Micron represent a new breakthrough in
size and gain. Advanced design software allows these
10" x 11" antennas to be smaller and more powerful
than ever before. This efficient design allows up to
98% of the available broadcast signal to actually reach
the incoming antenna cable rather than being lost to
impedance mismatches. Features: •May be table or wall
mounted •Beamwidth : 70° •Assembled dimensions:
10" (L) x 11" (W) x 4.5" (D)
MCM
Range
Part #
Mfr. # Miles
30-2325 CSM1
25
30-2330 CSM1-A 25
30-2335 CSM1-R 35
30-2340 CSM-XG 35
Amplifier Reflector ONLY
No
No
$47.99
Yes
No
63.99
No
Yes
63.99
Yes
Yes
79.99
ONLY
$87.99
95.99
Incorporating the same
compact engineering
which distinguishes the
ClearStream family, the C5
is targeted specifically for the high
VHF band. Features: •174~216MHz (Channels 7~13)
•Max gain: 7.6 dBi VHF • Range: 65+ Miles •Includes
UHF/VHF Antenna Combiner •Dimensions: 29" (L) x
23" (W) x 11.5" (D) •Mfr. #C5
MCM Part #
30-2315
ONLY
$55.99
ClearStream™ Micron
R Indoor Digital TV
Antenna
ClearStream™ High
Gain VHF Antenna
Remote Control A/B Switch
102
This antenna’s efficient,
compact design offers excellent
gain and impedance matching
across the entire HDTV channel
spectrum. Multiple mounting
configurations make this one
antenna suitable in a variety of installations. Features:
•Up to 30 miles range •Consistent gain throughout the
UHF spectrum •Wall, table, and poll mounts included
•Included reflector grid for outdoor performance
•Dimensions 12" (H) x 12" (W) x 5" (D)
•Range: Up to 45 miles
•Peak gain: 12 dBi
•Front to back ratio
greater than 18 dBi •Strong performance across UHF
DTV spectrum •All-weather balun included •Flexible
aiming characteristics, 60˚ beam-width •Dimensions:
23" (W) x 161⁄4" (H) x 7" (D) •Mfr. #DB2e
ONLY
$129.00
www.MCMelectronics.com /1-800-543-4330
HDTV Amplified Outdoor Antenna
The Terk HDTVo is an innovative,
compact, amplified outdoor antenna that features
powerful high gain, and offers versatile installation
flexibility. Its unique design incorporates a highly
directional log periodic antenna array and a pair of
curved elements that combine to capture and focus
HDTV signals. Mount flush to the side of a building,
or use the included mulit-mount mini-mast and base to
install virtually anywhere.
MCM Part #
30-2020
ONLY
$134.93
Follow us on:
&
1
A/V Distribution
Audio/Video
#30-2104
#30-2102
ClearStream™ DTV Antennas
Extended Range Uni-Directional UHF Antenna
•Range: 10~50 miles with a gain of 14.2 dBi
•All-weather construction of anodized aluminum
•Designed to withstand high winds, integrated all
weather ohm converter included •Strong gain across
entire UHF band (channels 14~69) •Dimensions 15"
(H) x 19" (W) x 39" (D)
MCM Part #
30-2345
ONLY
$55.99
•Consistently powerful reception gain across
the entire DTV spectrum •Advancements in
efficiency allows up to 98% of the available
broadcast signal to actually reach the
incoming antenna cable rather than being
lost to impedance mismatches •Compact and
easy to mount •Easy to assemble •Unmatched
power and efficiency through advanced computer design •Engineered for
extra strength and durability •UHF and DTV spectrum (470~806MHz)
•Multidirectional, up to 70° of beam width
#30-2106
MCM Part #
Model #
30-2102
C1
30-2104
C2
30-2106
C4
Range
Miles
0~30 0~50 0~65 Dimensions
(H) x (W) x (D)
10" x 10" x 4.5"
20" x 10" x 5"
19" x 20" x 4.5"
Universal 40" J-Mount Antenna Mast
The unique design allows you to get your
TV antenna higher than standard 18" poles
allow. These taller mounts are suited for
most off air antennas and will attach to any
flat surface including a roof, fascia, side of
house, or deck rail. Features: •40" J-shaped
mounting pole •Mounting bracket •1⁄4" (dia.)
lag bolts •Four roof sealing pads •15⁄8" (O.D.)
mast pole •Mfr. #STM-1000
MCM Part #
30-2360
ONLY
$19.99
Gain
8 dBi
10.2 dBi
14.8 dBi
#30-840
®
UHF/HDTV
Outdoor Antenna
ONLY
$39.99
79.99
119.99
#30-850
UHF/VHF/FM Antennas
•Directional outdoor antenna is optimized to pick up
UHF signals for digital television and high-definition
television broadcasts •Frequency range: 460~862MHz
•30 elements •75ohm “F” type connection •20dB •Up
to 50 mile range
MCM Part #
30-2155
Weight
2.5 lb.
3.5 lb.
8.5 lb.
•300ohm output, includes 75ohm transformer
MCM Part # Description Boom Length Elements ONLY
30-840
Colorstar 480 150"
48
$83.42
30-850
Color King 5884 58"
25
33.78
ONLY
$19.99
Amplified Outdoor TV Antenna
#30-2140
#30-2145
Ultra-Hi Crossfire™
HDTV/UHF/VHF/FM Antenna
•Exceptional outdoor reception of VHF/UHF
channels 2~69, and FM •Deep fringe rated •Connects
to either 75 or 300ohm downlead •Directional beam
width of approximately 30°
MCM
Part # Mfr. #
Max Range
30-2140 CM-3671 100 miles
30-2145 CM-3679 60 miles
Perfect for all types of television reception, including
digital and High Definition. While perfect for rooftop
mounting, the folding element design also makes
this the ideal choice for motor homes and campers.
Features: •Includes 20' coax cable •Mounts to standard
antenna mast (not included) •Full UHF/VHF/FM
and HDTV coverage •Includes 12VDC wall adapter
Specifications: •Amplifier gain: 20~28dB •Dimensions
(open): 2" (H) x 29" (W) x 14" (D)
MCM Part #
30-2185
ONLY
$29.99
Dimensions
(L) x (W) x (H)
ONLY
173" x 110" x 35.4"$196.73
122" x 110" x 35.4" 134.93
Uni-Directional HDTV UHF Antennas
These powerful, weather-resistant, outdoor antennas are ideal
for medium to long range applications that require the gain of the antenna to
be concentrated in one direction. The Yagi style design effectively rejects off axis
signals from structures that cause multi-path interference, and the corner reflectors
on the back of the antennas improve the forward gain of the antenna resulting in
exceptional performance across the entire UHF spectrum (channels 14~69).
MCM Part # Description
30-2071
Mid-sized, 43-element, long-range
30-2072
Large, high-gain, 91-element, long range
Range
miles
15~60
50~70+
Gain
db
15.7
16.7
Dimensions
(H) x (W) x (L) ONLY
19" x 18" x 62" $54.99
22" x 20" x 93" 66.99
www.MCMelectronics.com /1-800-543-4330
#30-2071
#30-2072
103
1
Audio/Video
A/V Distribution
Rotator Cable
Television Antennas
Three conductor cable
for use with many
popular antenna rotators. Outer jacket 0.162" black
PVC with 0.020" wall. Three 20AWG conductors color
coded black, white and red.
Multi-Directional HDTV UHF
Antennas
Multi-directional antennas are designed
to work in locations where the transmitters for digital stations
are spread apart. These popular HD antennas utilize a
bowtie design that provides a strong gain across the entire
UHF spectrum (channels 14~69). They function incredibly #30-2066
well in areas where flexible aiming is required and feature a
weatherproof construction that resists extreme wind loading.
MCM Part #
30-2066
30-2067
Description
Outdoor, most popular, mid-range
Outdoor, high-gain, long range
Range Miles
15~55
50~70
Gain
13.7db
15.8db
MCM Part #
24-3080
24-3085
24-3090
#30-2067
Dimensions
29" (H) x 19" (W) x 4" (D)
29" (H) x 42" (W) x 4" (D)
Length 100'
500'
1000'
ONLY
$18.99
76.99
159.00
ONLY
$72.00
79.99
FM Turnstyle
•Offers the gain of a folded dipole
with an omni–directional pattern
•Works in areas where stations are
situated in many directions
MCM Part #
30-855
ONLY
$23.16
AM/FM HD Radio Antenna Kit
•Professional quality AM/FM/HD radio antenna
•Receive stations from up to 90 miles in all
directions •All signals combined on a single RG-6
cable up to 200' (not included) •Includes surge
protector and all required adapters and jumpers
•Pole or wall mount •No preamplifiers required
•4' omni-directional monopole requires no ground
plane •Mfr. #AFHD-4
MCM Part #
33-10630
Scanner Antenna
Passive Flat Digital Antenna
Slim profile and streamline shape complements
any home theater center. Features: •360° reception
technology •Receives digital TV broadcasts as
well as FM radio signals •Mfr. #ANT1400R
MCM Part #
30-2215
ONLY
$21.62
ONLY
$165.83
Covers VHF/UHF public service bands
30~1300MHz. Includes 300 to 75ohm
matching transformer and 50' RG-6
coax cable.
MCM Part #
30-1380
ONLY
$46.34
Economical
Antenna Rotator
Our economical
antenna rotator
helps improve TV
and FM reception.
Two piece connects
via three wire
rotator cable.
Adjustable clamp
accommodates mast
up to 11⁄2".
MCM Part #
30-1100
ONLY
$62.82
Flat Panel HD Antennas
Ultra-flat design with a rich high gloss black finish
to complement today's LCD or plasma televisions,
while providing terrific HD signal reception. Features:
•Multi-directional design •Integrated coaxial cable
•#30-2225 includes removable signal amplifier
•Designed for indoor use
MCM Part #
30-2220
30-2225
Mfr. #
ANT1600R
ANT1650R
Passive/Active ONLY
Passive
$46.34
Active
64.88
ClearStream Outdoor FM Antenna
The sleek profile of the FM 360° houses panoramic
reception of FM radio broadcasts. Improvements
in element technology have resulted in a compact
design smaller than possible with legacy antennas. At
just the fraction of the size of traditional antennas,
this cutting-edge design efficiently captures standard
FM radio frequencies between 88-108 MHz at levels
necessary for the most reliable HD radio reception.
Features: •Bandwidth: 88 - 108 MHz •Max Gain:
3.2dBi •FM Range: 55 Miles •Impedance:75 Ohm
•Male F connector
MCM Part #
30-2355
104
Model #
FM360
ONLY
$69.99
Antenna Rotator
•Heavy-duty motor
handles large antennas
•Extra strong machine
cut gears won’t bind
•Brake pads hold firm
•Tested to 70 mph
winds •Requires three–wire rotator wire (#24-3080)
MCM Part #
30-1020
ONLY
$83.42
www.MCMelectronics.com /1-800-543-4330
Amplified Digital Outdoor Antenna
Superior construction and materials are
designed to withstand tough outdoor
conditions. Features: •Multi-directional
design provides 360° reception •Integrated
amplifier strengthens reception ability
•High gain •Mfr. #ANT800R
MCM Part #
30-2230
ONLY
$87.54
Follow us on:
&
1
A/V Distribution
Audio/Video
Amplified Indoor/
Outdoor HDTV Antenna
•360° reception pattern. •Amplifier gain:
10dB •Dimensions: 211⁄4" (W) x 101⁄4" (H) x
31⁄2" (D) •Mounting bracket, power injector,
mounting hardware, and removable amplifier
included •Mfr. #FDTVO
MCM Part #
30-2250
Low Profile
Passive HDTV Antenna
The FDTV2 from Terk is
optimized for HDTV reception,
with UHF and VHF reception
capability, and includes a 3-way
mounting bracket for maximum
flexibility in placement (hanging,
standing or lying flat). Features:
•360º reception pattern •Operating Bandwidth: VHF:
174~216MHz, UHF: 470~698MHz •Dimensions:
9" (W) x 9¾" (H) x 2½" (D)
MCM Part #
30-2235
ONLY
$53.55
Flat Black HD Antenna
ONLY
$87.54
HDTV Indoor Antenna
The Terk HDTVi indoor
HDTV directional antenna is optimized
for HDTV reception. Its UHF and
VHF elements are uniquely designed
for reception of all available HDTV
off-air broadcasts (channel 2~69). Highly
directional UHF elements reduce signal interference
and improve average return
loss for better reception and superior performance.
MCM Part #
30-2000
The FDTV2 from Terk is
optimized for HDTV reception,
with UHF and VHF reception
capability, and includes a 3-way
mounting bracket for maximum
flexibility in placement (hanging,
standing or lying flat). Features:
•Removable amplifier with 10dB gain •360º reception
pattern •Operating Bandwidth: VHF: 174~216MHz,
UHF: 470~698MHz •Dimensions: 9" (W) x
9¾" (H) x 2½" (D)
MCM Part #
30-2240
ONLY
$66.94
Indoor Amplified Digital Antenna
The FDTV1A from Terk is optimized for
HDTV reception. Removable amplifier provides
maximum flexibility and performance. Features:
•Multi-directional design offers 360° reception
•Includes mounting bracket for hanging, standing,
or lying flat •Amplifier gain: 10dB •Dimensions:
11¼" (W) x 11¾" (H) x 1¼" (D)
MCM Part #
30-2245
ONLY
$82.39
ONLY
$27.69
Basic UHF/VHF Antenna
•Receives HD and DTV signals •Super slim design can
be laid flat or hung horizontally on wall, even behind
your television •Includes coax cable •Mfr. #ANT1000
MCM Part #
30-2165
ONLY
$10.80
INDOORtenna™
HDTV/UHF Antenna
•Excellent indoor HDTV/
UHF reception •Passive
antenna design allows
for increased forward
gain while minimizing
interference from side
and rear •Place on set-top or mount on the wall
•Includes 110" of coax cable •Dimensions: 10" (L) x
11.5" (W) x 8" (H)
•Mfr. #CM-4040
MCM Part #
30-2150
ONLY
$27.28
Push-On Balun
•Quick connect for “F” fittings with
impedance matching transformer
•Minimum five
MCM Part #
33-010
MCM Part #
30-2170
ONLY
$41.70
Basic Slim Antenna
Low Profile
Amplified HDTV Antenna
• Receives local digital TV broadcasts and FM radio
signals •360° reception patented technology eliminates
constant adjustment •Enhances reception by
amplifying weak signals with a built-in ultra low noise
amplifier •Can be hung on a wall or lie flat •Coax
cable included •Mfr. #ANT1450B
(5-9)
$0.49
(10-up)
$0.46
•Simple classic design with adjustable 36'' dipoles and
loop •Built-in 5' coaxial cable •Receives UHF, VHF,
HDTV/DTV, and FM signals •Mfr. #ANT111
MCM Part #
30-2190
ONLY
$10.80
HDTV Indoor
Amplified
Antenna
Ideally suited for
indoor HDTV
(UHF)off-air
reception, this
antenna features a
low-profile boom
design, rotational elements for improved directional
gain, and a 7~13dB adjustable gain control (power
adapter included).
MCM Part #
30-2100
ONLY
$21.10
Outdoor Antenna
Balun
•Weather resistant, molded plastic construction
•Supplied with rubber boot
MCM Part # (1-4)
33-040
$2.19
(5-9)
$2.09
www.MCMelectronics.com /1-800-543-4330
(10-49)
$1.99
(50-up)
$1.89
105
1
Audio/Video
A/V Distribution
Television Antennas
®
UHF/VHF/HDTV
Indoor Antenna
•An amplified UHF/
VHF antenna that will
receive all FM, DTV,
and HDTV signals
•Adjustable amplifier
for better control on
reception gain •“F” type
input for connecting
external antenna, VCR, cable, or other source, or
used stand-alone •Great for areas where an outdoor
antenna is required for some stations, but nearby
stations that are too strong require an indoor antenna
•Frequency range: 40~860MHz •Max noise: 6dB
•Max amplification: 28dB •Power source: 120VAC or
optional 12VDC
MCM Part #
30-2160
ONLY
$17.25
FM Dipole Antennas
These high-quality FM dipole
antennas can be used for many newer
FM tuners and receivers. Available in
three configurations: 300ohm spade
terminals, 75ohm male “F” connector
and 75ohm female PAL connector.
These antennas are constructed from high-quality
300ohm twin–lead and perform significantly better
than the OEM supplied straight wire or a split two
conductor antennas providing higher-quality FM
reception.
MCM Part #
30-1530
30-1535
30-110
Description
Male “F” connector
Female PAL connector
Spade terminals
(1-9)
$3.08
3.08
2.56
AM Advantage
The AM Advantage
antenna is a passive,
fully adjustable indoor
AM antenna designed for
extended range capability.
The antenna is intended
to receive AM frequencies
530KHz~1600KHz for
local and distant AM
reception. The antenna features Pin–Dot™ Pre
Tuning system which allow the user to adjust the
antenna and match it to the specific frequency. Mfr.
#ADVANTAGE.
MCM Part #
30-1395
ONLY
$46.85
Amplifier Satellite Radio Splitter Kit
•Operates up to four or eight satellite radios from a
single antenna with this amplified splitter •Includes
all adapters and accessories •Uses standard RG-6
cable (not included) •Maintains proper RF link
budget for the radio •Splitter loss at 2.35GHz has
been compensated by an internal low-noise amplifier
powered by DC voltage supplied by radios •Splitter
has 8dB of gain •Adapters used to convert XM
or Sirius SMA and SMB connections into an “F”
connection to mate with RG-6 cables
MCM Part #
33-10675
33-10680
Mfr. #
SR-4
SR-8
MCM Part #
30-1205
ONLY
$104.03
#33-10690
#33-10695
Wide Band
Four-Way Passive Splitter
•Designed for all AM/FM, HD radio, broadcast TV,
cable TV, satellite radio, and satellite TV signals
•Passes signals from 500KHz to 2.4GHz •Insertion
loss: 12dB •Use in conjunction with #33-10695 for
lossless splits
MCM Part #Mfr. #
Description
ONLY
33-10690 MBS-4 4-way splitter
$83.42
33-10695 MBA-12 Line amplifier for #33-10690 88.57
Satellite Radio RG-6 Cable Extender Kit
For those living very
close to transmitting
towers, problems with
multipath interference can occur because the signals
are so strong that they bounce off nearby buildings
and other objects and cause multiple images to appear
on one’s TV screen. This attenuator allows users to dial
down the signal to reduce problems associated with
this multipath and overloading interference.
MCM Part #
30-2118
ONLY
$12.86
MCM Part #
33-10600
ONLY
$49.94
Power Inserter Kit
for XM Satellite Radio
•For use in satellite radio distribution networks to
overcome loss in cables and splitters •Gain: 16dB @
4.5VDC •Current consumption: Typically 10mA @
4.5VDC •Frequency range: 2320~2345MHz •Noise
figure: 4dB max •Mfr. #SBA-1
MCM Part #
33-10640
MCM Part #
33-10625
106
ONLY
$21.10
Sirius Ready
•Kit to permit the use of standard RG-6 cable
with satellite radio antennas •When used with the
included amplifier, this kit can extend the antenna
cable up to an additional 125' •Add the flexibility of
RG-6 cable Kit includes: •SMB to “F” adapter (to
mate with antenna cable) •High-gain amplifier •“F”
to SMB adapter cable (to mate with radio) •Mfr.
#EXTANT-01
•Designed to power line
amplifiers and XM
Satellite Radio amplified
antennas •This unit consists
of a 5VDC regulated power
supply for use in RG-6 networks
designed to distribute XM satellite radio signals
•Mfr.# PS-1
High Gain Line Amplifier
ONLY
$102.99
272.95
FM PRO 50
FM PRO is the clear choice for the FM enthusiast.
Designed to provide exceptional long-range FM
reception, it may be mounted indoors or outdoors
for a totally unobstructed installation. #30-1205 has
a weather-proof housing and is easily installed in an
attic, exterior side of the home or indoors in a closet,
garage or interior wall. New Advanced Capture
Circuitry™ (ACC) ensures that strong signals are
locked in and weaker broadcasts are received with
less noise. Terk’s exclusive Dual Drive Amplifier
boosts signals above noise and interference, using a
DC–driven phantom power supply that is easily
connected to your receiver.
(10-up)
$2.77
2.77
2.32
Variable Attenuator
Description
Four-way kit
Eight-way kit
XM/Sirius Radio Ready Pro Pack
•Everything needed to add Sirius to any “Sirius
Ready” receiver using up to 200' RG-6 cable
Kit includes: •Pro-500 outdoor antenna •“F” to SMB
3' adapter cable •Sirius SC-H1 tuner or XM CMP2000
tuner and dock
MCM Part #
33-10670
Mfr. #
SRR-5
For receivers
“Sirius ready”
ONLY
$228.66
ONLY
$83.42
www.MCMelectronics.com /1-800-543-4330
Follow us on:
&
1
A/V Distribution
Audio/Video
Mounts and Hardware
Satellite
Radio RG-6
Extension Kit
3' Tripods
This antenna
extension cable is designed
to work with any satellite radio antenna
(purchsed separately) to extend the cable length 100'
(lengths up to 300' can be achieved by cascading
three cable kits). Kit includes: •SMB to “F” adapter
•High-gain amplifier •100' premium RG-6 cable with
“F” connectors •3' female to SMB-plug adapter cable
•Two coax seals •Mfr. #PRO-100
MCM Part #
33-10615
ONLY
$73.12
Dual Mode Satellite Radio Antenna
•High-quality future proof home antenna for
simultaneous reception of both XM and Sirius Radio
•70 beam-width for easy alignment and mounting
Drives up to 200' of RG-6 cable (not included)
•Azimuth and elevation adjustments for optimum
aiming •Two-stage high-quality filtering for rejection
of out-of-band interference •High- quality aluminum
mount •Includes wall or pole mount brackets
•Mounts to any horizontal or vertical surface or pole
up to 2'' diameter.
MCM Part #
33-10645
ONLY
$87.54
#33-10605
SMA/SMB
to “F” Adapters
#33-10650
MCM Part #Description (1-9) (10-24) (25-49) (50-up)
33-10905 Standard $19.99 $16.90 $16.11 $15.93
33-10910 Portable
24.99 22.02 21.15 20.50
B
A
#33-10655
•Adapters used to convert XM or Sirius SMA and
SMB connections into an “F” connection to mate with
RG-6 cables
MCM Part #Description
Qty.
33-10605 3' SMB-plug to 1
“F” female adapter cable
33-10610 3' SMB-plug to 10
“F” female adapter cable
33-10650 SMA male to “F” female adapter 1
33-10655 SMB male jack to “F” male adapter 1
ONLY
$19.04
177.16
24.19
16.98
Satellite Radio RG-6
Cable Extender Kit
•Kit to permit the use of standard RG-6 cable
with satellite radio antennas •When used with the
included amplifier, this kit can extend the antenna
cable up to an additional 125' •Add the flexibility
of RG-6 cable Kit includes: •SMB to “F” adapter
(to mate with antenna cable) •High-gain amplifier
•“F” to SMB adapter cable (to mate with radio)
•Mfr. #EXTANT-01
MCM Part #
33-10600
•Used for
mounting TV
antennas and
satellite dishes
permanently or
for temporarily
use •Fits masts up
to 15⁄8" (included
#33-10910
#33-10905
with portable
unit) •Standard tripod uses six bolts to tighten down
on mast, and can be anchored on all legs with three
lag bolts each •Portable unit has integrated compass
and bubble level, folds up for easy transportation, and
secures to ground with anchor screw
ONLY
$49.94
Professional
High Gain
Satellite
Radio
System for
XM and
Sirius
C
“F” Type Connectors
Crimp type “F” connectors for antenna and cable TV
applications. Use with #22-100 hex crimp tool. #27930 includes a plastic strain relief. Minimum ten.
•Receives
XM or Sirius
satellite
radio services •Ideal for commercial, high-end home
and multi-dwelling unit installations •Optimized
for interference/multipath rejection and high gain
reception of satellite radio signals •Antenna can drive
up to 200' of RG-6 cable (not included) •Mounts to
any horizontal or vertical surface or to a 13⁄4" diameter
pole •High gain 12dBi antenna (5dB more than
standard antennas) Includes: •Built-in two-stage ultra
high low noise amplifier •Wall and pole brackets and
accessories •3' “F” female to SMB plug adapter cable
to mate with radio •Mfr. #PRO-500
MCM Part #
33-10620
ONLY
$155.39
Fig. MCM Part #Cable TypeDescription(10-49) (50-up)
Attached ferrule
A 33-0005
RG-59
Gold plated $0.37 $0.36
Detached Ferrule
B 27-1295
RG-59
Nickel plated 2.11
1.47
C 33-745
RG-6
Nickel plated 0.61
-
Pitch Pad Kit
•Pitch pad and lag bolt
kit •Pads reduce risk of
water leakage •Use when
mounting antennas on roof
•Contains six lag bolts
MCM Part #
30-940
ONLY
$3.18
AM/FM Tower
Positioned vertically, the tower receives
signals from all directions with equal
strength. Used horizontally, it becomes
highly directional to pull in weaker and
more distant stations. It also distinguishes
between signal reflections and the
main signal to eliminate overload and
multipath difficulties. Specifications: FM
stereo section: •Amplifier gain: Variable
0dB~25dB •Impedance: 75ohm adaptable
to 300ohm input with included matching
transformer •FM operating band:
88~108MHz AM stereo section: •AM
operating band: 500~1700KHz •AM gain:
15dB •Range: 360° 17" (H) x 31⁄4" (W)
MCM Part #
30-1110
(1-9)
$23.16
(10-up)
$21.53
Universal J-Mount
satellite dish mounting •Pivoting foot
mount offers the ideal solution for
mounting nearly anywhere, including
side of house, roof top, deck rail, or any
other flat surface •Pipe is reversible from
plate for more mounting angle options
Includes:•J-shaped mounting pole
•Mounting bracket •Expansion bolts
MCM Part #
30-2110
30-2112
30-2360
Size
30"
20"
40”
www.MCMelectronics.com /1-800-543-4330
ONLY
$21.99
15.99
19.99
107
1
Audio/Video
A/V Distribution
Mounts and Hardware
J-Pipe Mount
•Versatile all-in-one mount that can be used
with antennas or satellite dishes •Can be
mounted on the roof, wall, chimney or any
other flat surface •J-pipe is reversible from
mounting foot for a variety of positioning
options •Gray weatherproof coating •38" mast
height •15⁄8" mast diameter
MCM Part # (1-9)
33-10915
$9.99
(10-24)
$9.39
(25-49)
$8.99
(50-up)
$8.75
Siding Mount Block
Non-Penetrating Roof Mount
•Perfect solution for commercial buildings and other
flat roofs •For 18" and 24" dishes •Uses six 8" x 8"
x 16" cinder blocks for stability •Powder coated for
weather durability •Angle iron frame
MCM Part #
33-10565
ONLY
$33.98
•Clean and protective solution for mounting a satellite
dish to vinyl siding •Prevents insect infestations
and weathering •Comes in three styles to fit most
aluminum and vinyl siding •White
MCM Part #Description
33-10560 Fits double 5⁄8 lap 4" siding
33-10561 Fits 1⁄2 or 5⁄8 lap 5" siding
33-10562 Fits Dutch lap siding Dimensions ONLY
10" x 7"
$12.49
12" x 8"
12.49
12" x 8"
17.03
A
Satellite Dish Pipe Adapter
Antenna
Mounting Hardware
5' Tripod Roof Mount
•Mounts TV antennas without guy wires •Self
supporting •Extra heavy–duty with rotamast feature
•Fits mast up to 13⁄4" •Six screw mast support
MCM Part #
30-930
ONLY
$47.88
Fig.MCM Part #
A 30-1030
B 30-1035
C 30-1045
•Adapt existing pipes and masts to work with satellite
dish mounts •Heavy gauge steel •1.66'' outer diameter
•Tightens with two bolts
B
C
MCM Part # (1-9)
33-10890
$1.99
Description
Qty.
Guy wire clamp up to 11⁄2" mast 1
Turnbuckle - 7" open, 5" closed 3
Cable clamps 1⁄2" open 1⁄8" closed 3
ONLY
$4.11
4.62
1.60
(10-24)
$1.89
(50-up)
$1.65
Masts
16 gauge corrosion protected mast ideal for television
and communication antennas. 5' section swagged at
one end. 21⁄2' section ideal for use above rotator.
MCM Part #
30-1080
30-935
A
(25-49)
$1.81
Size
21⁄2'
5'
ONLY
$7.27
12.86
C
Pipe Clamp
B
Used to properly ground to copper
water pipes.
SnapToggle®
Heavy-Duty Anchors
Turn a two person job into a one
person job and get the job done
faster. You can even pre-install
without using a bolt for final
installation later. The SnapToggle®
anchor is a convenient, reliable,
accurate, easy-to-use anchor, and the strongest toggle bolt
in the smallest hole.
MCM Part # Mfr. #
28-11025 43321
28-11026 25014
28-11030 43311
28-11031 25013
108
Description
Quantity ONLY
10pk
$8.99
w/ 1⁄4" x 20 bolts
w/o 1⁄4" x 20 bolts
50pk
27.99
w/ 3⁄16" x 24 bolts
10pk
8.99
w/o 3⁄16" x 24 bolts
50pk
27.99
Heavy–Duty Antenna Mounting Accessories
MCM Part #
33-10805
•Heavy–duty mount for masts up to 11⁄2" outer
diameter •Made of all steel construction •Triple coat
corrosion protection
Weather Boot
Fig.
A
B
C
MCM Part #
30-895
30-915
30-1160
Description
Roof mount
“Y” chimney mount
Vent pipe mount
ONLY
$7.20
25.22
11.83
(1-9)
$1.49
(10-24)
$1.34
(25-49)
$1.30
(50-up)
$1.22
•Flexible black boot slides over
cable and connection to protect it
from outdoor elements •UV resistant
•2" length •100 per package
MCM Part #
33-10950
(1-9)
$8.99
(10-24)
$0.00
(25-up)
$0.00
Flat Coax Jumper
•18 gauge, 6 strand heavy-duty guy wire •Vinyl coated
to reduce effects of weather •Length: 100'
•Thin, flexible coax coupler allows you to run cables
through closed windows or other narrow gaps •Peeland-stick adhesive keeps jumper in place •Conforms to
any angle •8" length
MCM Part #
30-1055
MCM Part #
33-10935
Guy Wire
ONLY
$13.38
www.MCMelectronics.com /1-800-543-4330
(1-9)
$0.79
(10-24)
$0.70
(25-49)
$0.64
Follow us on:
(50-up)
$0.58
&
1
A/V Distribution
Audio/Video
Cable Clips
•Make any cable run look
neat and secured in place
by attaching coax or telecom
cabling to walls and trim with
high-impact plastic cable
clips •Each clip includes a
plated steel nail •100 clips
per package
MCM Part #Description (1-9)
33-10850 Single, white $1.59
33-10852 Dual, white 1.49
33-10854 Single, black 1.59
33-10856 Dual, black 1.49
#33-10884
(10-24) (25-49) (50-up)
$1.44 $1.33 $1.20
1.36
1.25 1.13
1.44
1.33 1.20
1.36
1.25 1.13
Flex Cable Clips
Single
•Remarkably strong flexible clips
grab cables without damaging them
•Integrated Philips hex-head screws
make installation quick and easy
•100 clips per package
#33-10880
#33-10882
#33-10925
#33-10920
Mast Mounts
MCM Part # Description 33-10860 Single, white
33-10862 Dual, white
33-10864 Single, black
33-10866 Dual, black
(1-9)
$2.99
2.99
2.99
2.99
Dual
(10-24) (25-49) (50-up)
$2.76 $2.65 $2.57
2.76
2.65
2.57
2.76
2.65
2.57
2.76
2.65
2.57
•A variety of mast mounts for finding the perfect location to mount an antenna or satellite dish
•All mount fit up to a 11⁄2" mast •Eave mount adjusts from 46"~68" span
MCM Part #
33-10880
33-10882
33-10884
33-10920
Description
4" wall mount
8" wall mount
12” wall mount
U-bolt
(1-9)
$4.99
7.49
7.49
1.29
(10-24)
$4.74
7.03
7.03
1.16
(25-49)
$4.50
6.77
6.77
1.06
(50-up)
$4.25
6.54
6.54
0.96
CATV Security
Tool
Copper Split Bolts
•For copper wire grounding
connections and splices •Available for
4, 6, and 8 gauge solid copper wire
MCM Part # Wire Size (1-9) (10-24) (25-49) (50-up)
33-10825
4 AWG
$0.69 $0.62 $0.58 $0.51
33-10830
6 AWG
0.99
0.90 0.80
0.70
33-10835
8 AWG
0.79
0.71 0.66
0.59
Description
Security tool
Security sleeve
ONLY
$7.58
0.62
Copper Grounding Straps
Wraps around and tightens to pipe, conduit or other
electrode to connect grounding wire.
MCM Part #Length
33-10815
6"
33-10820 12"
(1-9)
$0.79
0.79
(10-24) (25-49) (50-up)
$0.70 $0.64 $0.58
0.70
0.64
0.58
Coax Seal
•Hand-moldable plastic
seal is perfect for sealing
outdoor connections and
cable splices •1⁄2'' width
•60'' length
MCM Part #
33-10945
4" Grounding Rod
•Used to ground outdoor antenna and satellite sytems
•Use with proper grounding wire and clamps for a
complete ground •High-strength steel with copper top
layer •11⁄32" thickness
MCM Part # (1-9)
33-10810
$2.49
(10-24)
$2.32
(25-49)
$2.23
(50-up)
$2.16
High frequency ground blocks have extended
frequency capacity to 2.4GHz making them perfect for
satellite and digital applications. Nickel plated finish to
resist effects of the weather.
MCM Part #
33-7705
33-7710
•Precision machined,
high-quality security
tool for connecting
and disconnecting
cables protected by a
security sleeve •Long
shaft fits all types of
sleeves
MCM Part #
33-0025
33-0030
High Frequency
Ground Blocks
(1-9)
$1.89
(10-24)
$1.73
(25-49)
$1.66
(50+)
$1.61
Description (1-9)
Single
$1.49
Dual
2.07
(10-99)
-
$2.05
(100-up)
$1.97
Drop Enclosures
These drop enclosures
will house and protect
components from the
elements that corrode and
A
shorten their lives. Drop
boxes produce a professional
appearance for cable TV
and satellite installations.
The Omni II box offers
simplicity of installation
and professional appearance B
along with a generous interior
and the ability to seal the box for drop security.
The Residential Control Box is designed to offer
visual evidence of tampering and provides for easy
maintenance. All boxes are UV resistant and come in
a neutral gray color.
Fig.
A
B
MCM Part #Description (H) x (W) x (D)
ONLY
33-6945 Omni II box 5.75 x 5.0 x 1.25 $3.11
33-6950 Residential 8.75 x 6.25 x 2.75 6.54
Control box
www.MCMelectronics.com /1-800-543-4330
109
1
Audio/Video
A/V Distribution
Satellite
D12 Series Standard Receiver
Slimline Dish and LNBF
•Dish kit includes mounting
brackets, arm, mast, and Slimline
reflector •Use dish kit with any of the LNBF options
•All LNBF units receive orbital 99°/101°/103° for
all DirecTV® standard programming •5-LNBF
units additionally receive 110°/119° for local HD
programming in some areas •SWM options for
running single wire from the dish to SWM compatible
multi-switches and splitters
MCM Part #
33-10990
33-10992
33-10994
33-10996
33-10998
Description
Slimline dish kit with mounts
3-LNBF, 4 outputs
3-LNBF, 1 output (SWM)
5-LNBF, 4 outputs
5-LNBF, 1 output (SWM)
ONLY
$72.09
41.19
92.69
61.79
102.99
With the DIRECTV® D12 series
receiver, you can access over 250
digital-quality channels, plus access
interactive capabilities and a customizable on-screen
program guide. Explore and personalize all your
viewing options quickly and easily with the included
remote control. Features: •Interactive features include
mix channels, DIRECTV® Active, and MiniGuide
•Parental controls to set rating restrictions and
spending limits •Programming options like CHOICE,
DIRECTV® Spanish, XM satellite radio and pay
per view movie and event channels Includes: •Access
card •Remote controls and batteries •A/V and
S-video cables •Phone and power cords •User guide
•This equipment is for use only with DIRECTV®
subscription television service and is subject to
DIRECTV's® terms and conditions
MCM Part #
33-7701
R Series DVR
The DIRECTV Plus™ DVR receiver
lets you record up to 100 hours of
programs, and pause or control live
TV. With the R22 receiver you can automatically
record an entire season of your favorite shows, find
and record programs by title, actor, or director,
listen to theater-quality Dolby® Digital sound, and
schedule recording up to 14 days in advance. Includes:
•Access card •Remote controls and batteries •A/V and
S-video cables •Phone and power cords •User guide
•This equipment is for use only with DIRECTV®
subscription television service and is subject to
DIRECTV's® terms and conditions
MCM Part #
33-7702
ONLY
$132.87
ONLY
$97.84
H Series High Definition Receiver
High-Definition HR Series DVR
High-Definition
HR-PRO Series DVR
The HR-PRO series DVR is the
high-end DIRECTV® solution
for professionally installed home theater and
commercial systems. Features: •Rack mountable •View
programming featuring 1080i high definition video
with Doby Digital 5.1 audio •Record up to 400 hours
of programming (100 hours of HD) •Plan ahead
with 14 Advanced Program Guide® •Exclusive DLI
optical HDMI link allows for a remote television to
receive high-definition content through fiber optic
cable up to 1000' away •Outputs include: HDMI A/V,
optical HDMI A/V, S-video, dual component video,
composite A/V, optical digital audio (toslink), and
coaxial digital audio •Inputs include: Dual satellite,
USB, RS-232C, IR, dual ethernet, phone jack, SATA,
and 120VAC Includes: •6' HDMI cable •6' component
video cable •6' composite A/V cable •RF remote
•Power cable •Rack mounting hardware •DIRECTV®
service and installation not included
MCM Part #
33-10570
Description
HR-PRO series receiver
High Performance Dual LNB
DBS LNB for use with digital satellite
system dishes with rectangular shaped
tubes. Designed to work with “D”
shaped tubes as well. Perfect low cost
replacement for damaged LNBs.
MCM Part #
33-7435
110
ONLY
$23.68
Add DIRECTV® and DVR Service
and you get the best choice and
widest selection of high definition
programming. Features: •Standard-definition (SD) and
high-definition (HD) enabled •Simultaneous SD and
HD output •Record up to 200 hours of SD, or up to
50 hours of HD programming •Two satellite tuners
for access to SD and HD DIRECTV programming
•14-day Advanced Program Guide® •Pause and rewind
live TV for up to 90 minutes •Series Link® feature
•One touch record, auto record, manual record,
and bookmarks •Search and record •Interactive
TV enabled •This equipment is for use only with
DIRECTV® subscription television service and is
subject to DIRECTV's® terms and conditions
MCM Part #
33-7704
Description
H series high-def DVR
With the DIRECTV® H series
receiver, you can access over 265
digital-quality audio and video
channels from DIRECTV® in both high-definition
and standard definition Features: •Versatile HDTV
connection options include HDMI digital audio/video
and component video, as well as standard composite
video and RCA audio •1080i picture output resolution
formats •Dolby® Digital 5.1 surround sound capable
•MPEG-4 AVC capable Includes: •Access card •B-band
convertor •Remote control and batteries •Component,
S-video, and standard A/V cables •Phone and power
cords •User guide •This equipment is for use only
with DIRECTV® subscription television service and is
subject to DIRECTV’s® terms and conditions
MCM Part #
33-7703
ONLY
$129.00
ONLY
$259.00
Single Wire
Multi-Switch
ONLY
$668.47
SWM Compatible
Splitters
•High-frequency RF splitters designed for
use with splitting SWM satellite signals •One port DC
pass •DIRECTV® SWM approved
MCM Part #
33-11010
33-11012
33-11014
Description
2-way
4-way
8-way
ONLY
$6.17
9.26
16.47
www.MCMelectronics.com /1-800-543-4330
•Combine up
to six LNB inputs
(flex ports 72.5°/95°,
5-LNB 99°/101°,
103°/110°/119°) for a
simpler, single wire installation
into the home •Two SWM outputs can be split with
SWM compliant high-frequency splitters for up to
eight receivers or four DVRs •DIRECTV® compatible
DVRs receive both needed signals from a single
connection •Three legacy outlets for older equipment
•Off-air antenna diplexer included •Power inserter
required, sold separately
MCM Part #
33-11000
33-11005
Description
Single wire multi-switch
28V power inserter
Follow us on:
ONLY
$184.37
20.59
&
1
A/V Distribution
6 x 8 Multi-Switch
•Six satellite inputs:
four inputs from
101°/110°/119° and
99°/103°; two flex
port inputs from
72.5° and 95° for international and local programming
•Passive unit powered by connected satellite
receivers •Wide band frequencies: 250~750MHz,
950~1450MHz, and 1650~2150MHz
MCM Part #
33-11007
ONLY
$72.09
Audio/Video
RF/Satellite Meter
This hand held CATV/satellite
meter has been designed
for the technician to make
quick and accurate signal
strength measurements for
both CATV and satellite. This
powerful, simple to use tool
measures frequencies from
25MHz~1550MHz. •Measures
satellite from DIRECTV®, DishNetwork, CATV and broadcast
signal strength •Two rows of
ten easy-to-read indicator lights
•Hand held design, great for use
with HDTV •Includes 22KHz tone
generator for use with dual satellite
systems •Requires 9V battery (included) •Mfr. #M200
MCM Part #
33-9695
(1-9)
$404.79
(10-up)
$386.25
B-Band Converter
DirecTV B Band Converter allows
the HR20 and H20 high-definition
receivers to receive all of the currently
offered HD channels. The HR20 requires two (one per
tuner), and the H20 requires one.
MCM Part #
33-10999
ONLY
$20.59
Channel Vision Structured Wiring
#50-12800
#50-12802
5 x 12 Multi-Satellite Multi-Switch
Four satellite IF and one terrestrial TV input to 12
outputs to satellite receivers. Built–in satellite IF
amplifier compensates for splitter loss. LNB selection
by 14/18VDC and 22KHz tone provided by equipped
receivers. Built–in power supply provides power for
operation, amplification and operation of the LNBs.
MCM Part #
33-8690
(1-9)
$91.66
(10-up)
$88.97
VHF/UHF/Satellite
Diplexer-Mixer
The TSDM-2150 is a compact
television antenna satellite
diplexer/combiner used in
applications that require
satellite I.F. distribution from 950~2150MHz.
The TSDM-2150 uses a rugged case that allows
for outdoor use. Specifications: •Frequency range:
Satellite: 950~2150MHz, television antenna:
40~860MHz •Connectors: “F” type •EMI
performance: >80dB
MCM Part #
33-2710
(1-9)
$5.40
(10-49)
$5.14
(50-up)
$4.82
•Combines off-air signals with a
satellite drop •Power passive one
port •40~860MHz/ 950~2250MHz
•Includes grounding screw
(1-9)
$1.54
(10-24)
$1.47
(25-49)
$1.35
(50-up)
$1.22
•In-line amplifier for
satellite cable runs
greater than 100' •20dB
max slope gain •For
900~2150MHz
MCM Part #
33-10970
Passive Coax Splitters
MCM Part #
33-2720
MCM Part #Mfr. #BandwidthOutputs Loss (1–2) (3–up)
50-12800 C0202 1GHz
Two 3.5dB $10.80 $9.87
50-12802 C0204 1GHz
Four 7.0dB 15.44 14.45
50-12804 C0208 1GHz Eight 11.0dB 24.19 22.77
50-12818 C0232 2GHz
Two 3.5dB 13.89 12.89
50-12820 C0234 2GHz
Four 7.0dB 19.04 17.78
(1-9)
$3.11
(1-9)
$12.35
(10-up)
$11.15
Satellite Finder Meter
•Position and aim satellite
dishes with ease •Connects
between the LNB and
satellite receiver or 13~18V
power supply •Frequency
range: 950MHz~2.4GHz •Gain: 11dB •Operating
range: 52~60dB LNB gain
ONLY
$8.99
Acutrac®22 Digital
Satellite Signal
Level Meter
The Acutrac®22 allows an installer to easily align
a multi–feed system by displaying LNB A and LNB
B signal strength measurement levels simultaneously.
The Acutrac®22 features include: LCD display,
selectable audio on-off tone, receiver voltage output,
individual LNB current consumption, 22KHz tone
and coax cable test. Acutrac®22 Pro also includes:
Rechargable battery pack, leather case and AC/DC
chargers. Mfr. #AcutracPro.
In-Line Amplifier
(10-24)
$2.99
(25-49)
$2.87
(50-up)
$2.78
#50-12804
Features: Die-cast housing, low noise: 4dB, high
gain: 20dB, passes DC through for powering LNBs,
sloped gain for long cable runs, voltage supplied by
the satellite receiver Specifications: •Noise figure: 4dB
•Gain: 950MHz: 15dB, 1450MHz: 18dB, 1750MHz:
20dB, 2150MHz: 21dB •Maximum output: 30dBmV
(12 channels) •DC voltage: 15~18VDC (negative
ground) •Connectors: “F” type
MCM Part #
33-10940
Diplexer
MCM Part #
33-10975
In-Line
950~2150MHz
Amplifier
MCM Part #
33-7395
Passive RF splitters are perfect for cable and antenna
systems where sufficient signal strength exists to
split the feed to multiple runs without additional
amplification. All splitters easily snap into Channel
Vision enclosures for fast professional installation.
Models are available with 1GHz and 2GHz bandwidth
to suite a variety of requirements.
Frequency Agile
RF Modulator
Designed for use in
all Channel Vision
structured wiring
panels, this RF
modulator is ideal for inserting a signal from a camera
or other composite video source into an existing cable
or antenna system. Composite video and L/R line level
audio inputs may be placed a user specified channel
from UHF 14~78 and ultraband channels 65~135
(excluding 95~99). Simple pushbutton operation
allows easy channel selection. Power supplied via
provide AC adapter. Mfr. #C0301.
MCM Part #
50-12824
(1–2)
$102.99
(3–up)
$98.83
ONLY
$159.00
www.MCMelectronics.com /1-800-543-4330
111
1
Audio/Video
A/V Distribution
Channel Vision Structured Wiring
Starter Module
Basic CATV/Phone Service Module
Designed for use in all Channel Vision structured
wiring panels, this module distributes four telephone
lines to up to seven locations, plus has a passive
splitter to distribute antenna or CATV signals to six
locations. Phone connections are punch down, CATV
connections are F type female. Mfr. #C0217.
Designed for use in all Channel Vision structured
wiring panels, this compact module distributes up to
four telephone lines to up to six locations, plus has a
passive splitter to distribute antenna or CATV signal
to four locations. Phone connections are RJ-45 female,
CATV connections are F type female. Mfr. #C0214.
MCM Part #
50-12808
(1–2)
$37.07
(3–up)
$35.05
MCM Part #
50-12814
(1–2)
$38.61
(3–up)
$36.61
MCM Part #
50-12810
Phone/CATV
Distribution Module
Designed for use in
all Channel Vision
structured wiring
panels, this module
distributes four
telephone lines to up to
15 locations, plus has a passive splitter to distribute
antenna or CATV signals to four locations. Phone
connections are punch down. CATV connections are F
type female and will pass IR as well as DC power. Mfr.
#C0219.
MCM Part #
50-12816
(1–2)
$55.61
(3–up)
$52.42
Basic Service Module
Designed for use in all Channel Vision structured
wiring panels, this module distributes two telephone
lines to up to six locations, plus has a passive splitter
to distribute antenna or CATV signals to four
locations. Phone connections are punch down, CATV
connections are F type female. Mfr. #C0216.
MCM Part #
50-12812
(1–2)
$37.58
(3–up)
$35.57
Structured Wiring Panels
MCM Part #
50-12700
50-12720
50-12722
50-12724
50-12730
50-12734
50-12736
50-12740
50-12742
50-12744
50-12746
50-12750
50-12752
50-12756
112
Home Office Module
Designed for use in all Channel Vision structured
wiring panels, this module provides a fundamental
connection point for any small office/home office
environment that utilizes data, voice and a cable
modem. CATV input provides split output, one
to CATV and one to cable modem locations. The
CATV output can easily be split externally for further
distribution. Four RJ-45 female connectors are also
provided, each with their own 110 punch down for
interconnection of voice or data lines. Mfr. #C0215.
#50-12730
Mfr. #
C0112
C0119
C0119C
C0119E
C0128
C0128E
C0128HC
C0138
C0138D
C0138E
C0138HC
C0150
C0150D
C0150HC
Designed to be the central “brain” of a residential low
voltage system, these panels provide a wiring hub for
sending signals to every room, with distribution of cable
TV, satellite, speakers, IR, internet and voice, security
cameras and more. The modular layout of these sturdy
cabinets provides upgradeability and easy access. Panels
are available as complete kits, including doors and all
needed hardware, or enclosures, covers and doors can be
ordered separately, allowing a variety of combinations
to suite any need. All panels may be surface mounted,
and are 35⁄8" deep by 14" wide allowing flush installation
between studs.
#50-12742
Description
Complete panel enclosure with cover
Complete panel enclosure with cover
Panel cover
Panel enclosure only
Complete panel enclosure with cover
Panel enclosure only
Hinged panel cover
Complete panel enclosure with cover
Hinged smoked Plexiglas door
Panel enclosure only
Hinged panel cover Complete panel enclosure with cover
Hinged smoked Plexiglas door
Hinged panel cover
Height
12"
19"
19"
19"
28"
28"
28"
38"
38"
38"
38"
50"
50"
50"
(1–2)
$47.88
60.76
17.50
40.16
92.69
62.82
29.34
124.63
156.56
85.48
39.64
172.01
182.31
55.61
(3–up)
$45.45
57.31
16.22
37.75
88.00
59.29
27.67
119.48
148.32
81.03
37.54
163.77
173.04
52.42
www.MCMelectronics.com /1-800-543-4330
(1–2)
$52.00
(3–up)
$49.40
Forward Path
Signal Amplifiers
Designed for use
in all Channel
Vision structured
wiring panels, these
amplifiers provide forward path
amplification from 54MHz~1GHz, while providing a
passive 5~42MHz return path, making
it fully compatible with interactive and addressable
digital cable boxes. It is ideally placed just prior to
multi room splitters, or at the beginning of a multi
drop system. Included DC adapter connects via
standard coax cable, and may be connected directly
to the amplifier, or inserted anywhere down the line,
using an optional power injector. Input and output
connections are F type female.
MCM Part #
50-12826
50-12830
Mfr. #
C0310
C0315
Gain
10dB
15dB
(1–2)
$53.55
122.57
(3–up)
$50.40
117.42
Eight-Way Amplified
Splitter with Modulator Input
Designed for use in all Channel Vision™ structured
wiring panels, this amplified splitter features eight
outputs with approximately 5dB gain on each output
from 5~1550MHz. Active return path provides unity
gain from 5~42MHz, from all eight outputs allowing
compatibility with addressable digital cable boxes and
modems. A separate isolated input allows injection
of a modulated signal from any Channel Visions RF
modulators. Unit includes eight 75ohm terminators for
unused outputs. Includes: •DC adapter connects via
standard coax cable, all input and output connections
are “F” type female. Mfr. #C0333.
MCM Part #
50-12833
ONLY
$148.32
Follow us on:
&
1
A/V Distribution
Audio/Video
#50-12848
High Gain Bi-Directional Signal Amplifier
Telephone Distribution Module w/RJ13X Insert
Designed for use in all Channel Vision structured
wiring panels, this module accommodate up to four
incoming telephone lines and distributes to up to eight
locations. It also provides an RJ31X insert point,
allowing security equipment to be connected at this
distribution point, and have full line seize access.
Simple 110 punch-down connections ensure quick,
reliable installation. Mfr. #C0432
MCM Part #
50-12846
(1–2)
$55.61
(3–up)
$52.42
Designed for use in all Channel Vision structured
wiring panels, these amplifiers provide forward path
amplification from 54MHz~1GHz, while providing
return path amplification from 5~42MHz. This is
perfect for large systems where multiple televisions
are going to utilize interactive digital cable boxes. It is
ideally placed just prior to multi room splitters, or at
the beginning of a multi drop system. Independent
gain and tilt controls are provided for both the
forward and return amplifiers, allowing the installer to
set perfect levels within each unique system. Maximum
forward gain: 40dB, reverse gain: 20dB. Unit is
powered via attached three-prong grounded AC cord.
Mfr. #C0340.
MCM Part #
50-12836
(1–2)
$269.86
(3–up)
$257.50
#50-12850
Telephone
Distribution Modules
Designed for use in all Channel Vision structured
wiring panels, these modules accommodate up to four
incoming telephone lines and distribute to either seven
or 15 locations. Simple 110 punch-down connections
ensure quick, reliable installation. Multiple modules
may be cascaded to accommodate additional
phone locations.
MCM Part # Mfr. #
50-12848
C0438
50-12850
C0439
Locations
7
15
(1–2)
$30.37
45.31
(3–up)
$28.71
43.05
Datacomm Sctructure Wiring
16 Port Amplified Splitter
Designed for use in all Channel Vision structured
wiring panels, this single input amplifier provides
sufficient boost to provide unity gain for each of the
16 outputs. A passive 5~42MHz return path allows full
compatibility with interactive and addressable digital
cable boxes. This unit is DC passive as well, allowing
it to pass IR signals fed down the coax. Included DC
adapter connects via standard coax cable, all input and
output connections are F type female. Mfr. #C0332.
MCM Part #
50-12834
(1–2)
$89.60
(3–up)
$84.99
Four Way
Amplified
Splitter
Designed for
use in all Channel Vision structured wiring panels,
this single input amplifier features an 8dB amplifier
and four outputs, allowing the signal to be distributed
to four locations without loss normally associated
with splitting the signal. A passive 5~42MHz return
path allows full compatibility with interactive and
addressable digital cable boxes. This unit is DC passive
as well, allowing it to pass IR signals fed down the
coax. Included DC adapter connects via standard
coax cable, all input and output connections are F
type female. Mfr. #C0314.
MCM Part #
50-12828
(1–2)
$60.76
(3–up)
$57.31
Home Command
Center Structured
Wiring Panels
Back
Multi Channel Agile RF Modulators
Designed for use in all Channel Vision structured
wiring panels, these RF modulators are perfectly
suitable for shelftop use as well. Units feature
composite video and L/R line level audio inputs,
placing each signal source on a user specified channel.
Models are available with two, three or four inputs,
allowing up to four separate sources to be injected
into a cable system, on unique channels. IR outputs
are provided as well, allowing full compatibility with
Channel Vision coaxial IR engine components. 25dB
output allows signal to be distributed over large
systems without additional amplification. Digital
display allows easy selection of output channels from
UHF 14~78 and ultraband channels 65~135 (excluding
95~99). Power supplied via included AC adapter
MCM Part #
50-12838
50-12840
50-12842
Mfr. #
C0352
C0353
C0354
Channels
2
3
4
(1–2)
$269.86
363.59
384.19
(3–up)
$257.50
346.08
364.62
Simplify any
wiring project with
these DataComm
structured wiring
panels that are
available with
phone and video
modules included
or as an empty
panel so you
can customize
your installation.
Features: •12" x
15" enclosure •Hinged door with key lock •Phone and
video module included (#50-10700 and 50-10705 only)
•Modules support up to four phone lines per location
•RJ-45 test port •Mounting holes for additional
modules •Modules include RJ-31X jack for security
board installations •Mounting holes for security
boards •Complies with NEC requirements UL1863
and UL1023
MCM Part # Mfr. #
Description
ONLY
Panels with modules
50-10700 70-0010
1 x 8' 1GHz coax splitter, $90.63
4 x 10' phone board
Panels only
50-10710 70-0015-HC Panel with hinged
52.00
door and key lock
50-10720 70-0015-SC Panel with screw-on cover 40.67
Optional support bracket
50-10778 70-0099
2.56
www.MCMelectronics.com /1-800-543-4330
113
1
Audio/Video
A/V Distribution
Datacomm Sctructure Wiring
Universal
Structured
Wiring Panels
#50-10774
These large structure
wiring panels allow
an installer to
meet current
infrastructure
requirements, while
preserving space for
future technologies.
Features: •Support
bracket for added
stability (one for
28" and two for
44" enclosures)
•Additional side
knockouts for terminating voice, data, video, and
security cables •Additional bottom knockouts for
adding UL switch boxes •Additional vents for more
cooling (44" enclosure doors only) •Mounting holes
for phone and video modules •Mounting holes for the
security industry’s best-selling boards
MCM Part # Mfr. #
12" x 44" panel and covers
50-10730 70-0017-E
50-10732 70-0017-S
12" x 28" panel and covers
50-10725 70-0016-E
50-10726 70-0017-H
50-10727 70-0017-S
Description
Compact Structured
Wiring Panels
Simplify any wiring installation
project with these DataComm
structured wiring panels.
MCM Part # Mfr. #
50-10774 70-0078
50-10776 70-0080
#50-10776
Description
ONLY
Four gang wall plate with $28.83
4 x 8 phone and 1 x 6 1GHz coax
Two gang wall plate with
18.01
4 x 8 phone
$76.21
41.70
Panel
Hinged cover with lock
Screw on cover
53.55
61.79
26.77
•Innovative design includes cables pre-terminated to
the wall plate •Stainless steel wall plate with optional
black anodized plate (all included) •Double gang
design with VGA, USB, S-video, composite video, L/R
audio and 3.4mm audio ports •Solder buckets on the
gold-plated RCA connectors
MCM Part #
831-2388
831-2389
Wall Plates
Description
10M (32') cables
15M (42') cables
D
(1-9)
$79.99
129.00
(10-up)
$77.99
125.78
C
B
A
ONLY
Panel
Screw on cover
Audio/Video Projector Wall Plate
E
F
Audio/Video Projector Wall Plate with HDMI
#50-10772
#50-10740
•Innovative design includes cables pre-terminated to
the wallplate •Stainless steel wall plate with optional
black anodized and (all included) •Double gang design
with VGA, HDMI, S-video, USB, composite video,
L/R audio and 3.5mm audio ports •Solder buckets on
the gold plated RCA connectors
MCM Part #
831-2386
Description
10M (32') cables
(1-9)
$149.00
G
(10-up)
$145.28
H
Stainless Steel
VGA Wall Plates
Adaptiplate™
HMDI Keystone
Insert
#50-10762
#50-10768
Home Command Center Modules
Customize your structured wiring installation
with the following accessories from DataComm.
MCM Part #Mfr. #
50-10740 70-0020
50-10752 70-0030
50-10764 70-0038
50-10766 70-0047
50-10768 70-0048
50-10772 70-0070
114
Description
ONLY
1 x 8 coax and 4 x 10 voice
$47.88
8 port data
31.92
1 x 8 coax 2GHz
35.52
Battery back-up mounting plate 10.80
Universal mounting bracket
13.38
4 x 10 add on voice expansion 44.79
Designed as part of
the Adaptiplate™
Wall Plate System,
this HDMI femalefemale coupler is compatible with standard Keystone
wall plates. It accepts a male connector at either side,
allowing easy termination of HDMI cables at the
wall. Keystone configuration allows endless flexibility
in combining with other data, audio and video wall
plate connections. It is also suitable as a free standing
HDMI coupler. White color.
MCM Part #
50-10805
(1-3)
$8.99
(4-up)
$8.09
www.MCMelectronics.com /1-800-543-4330
High quality wall
plates provide a
professional look
in any installation. Feed-through connectors eliminate
the need to solder.
Fig. MCM Part #
A
50-10142
B
50-10144
C
50-10141
D
50-10146
E
50-10148
F
50-10149
G
50-10152
H
50-10154
Configuration
Single VGA
Dual VGA
Dual VGA plus Audio
Single VGA plus L/R audio
Single VGA plus 3.5mm audio
Single VGA, single HDMI, plus 3.5mm audio
Single VGA plus single component video
Single VGA, single component
video, plus 3.5mm audio
Follow us on:
&
ONLY
$5.65
9.77
11.99
12.86
7.71
14.41
13.89
15.44
1
A/V Distribution
#50-10840
#50-10850
Audio/Video
#50-10860
Decora Style HDMI
Wall Plates
Adaptiplate™ Keystone Decora Inserts
Obtain the professional look you or your customer
desires in any home theater installation with these
single gang decora style HDMI wall plates from Stellar
Labs®. Available in three configurations: •Flush mount
female HDMI on the exterior, right angle HDMI
female inside wall cavity (#50-10840) •Recessed HDMI
female on the exterior, 51⁄2" female HDMI pigtail
inside wall cavity (#50-10850) •Recessed dual HDMI
female connections on the exterior, dual 51⁄2" HDMI
female pigtails inside wall cavity (#50-10860)
MCM Part #
50-10840
50-10850
50-10860
Description
Flush mount
Recessed with pigtail
Dual recessed with pigtails
ONLY
$6.99
9.99
13.99
360° Rotatable HDMI Wall
Plate
Single gang wall plates are
ideal when HDMI cable is
to be terminated at the wall.
Right angle female connector can be
rotated a full 360° at 45° increments,
saving space and minimizing connector
strain. 7" cable pigtail length allows
reliable connection of HDMI connection inside the
wall. Cutaway panel allows addition of a second
HDMI connector within the same wall plate. Cable
assemblies are CL3 rated and support resolutions up
to 1081p. Connectors are sold separately.
MCM Part #
50-10305
50-10306
50-10307
Color
White
Light almond
Ivory
(1-3)
$5.09
5.09
5.09
Multiple configurations allow selection from one
to six connector inserts in a single gang plate size.
Use alone or combine with others to provide exactly
the plate configuration needed. Perfect when A/V
connectors are combined with telephone and network
keystone jacks. Insert #50-10780 or 50-10781
allows compatibility with all Adaptiplate™ A/V hex
connectors.
Stainless Steel Adaptiplate™
Decora Wall Plates
These single gang decora style wall plates
are compatible with all Adaptiplate®
A/V Hex Connector inserts.
MCM Part # Openings
Decora inserts
50-20050
Blank
50-20055
One
50-20060
Two
50-20065
Three
50-20070
Four
50-20075
Six
50-20080
Eight
Single gang decora cover
50-20120
-
(1-3)
(4-11)
(12-up)
$1.39
1.39
1.39
1.39
1.39
1.39
1.39
$1.25
1.25
1.25
1.25
1.25
1.25
1.25
$1.05
1.05
1.05
1.05
1.05
1.05
1.05
3.49
3.19
3.09
(4-up)
$4.55
4.55
4.55
MCM Part #
50-10150
50-10151
50-10155
50-10156
50-10160
50-10161
50-10165
50-10170
50-10171
Hex
Openings
One
One
Two
Two
Three
Three
Four
Six
Six
Color
White
Ivory
White
Ivory
White
Ivory
White
White
Ivory
(1-3) (4-11) (12-up)
$0.99 $0.89 $0.79
0.99 0.89 0.79
0.99 0.89 0.79
0.99 0.89 0.79
0.99 0.89 0.79
0.99 0.89 0.79
0.99 0.89 0.79
0.99 0.89 0.79
0.99 0.89 0.79
Adaptiplate™ Keystone
Inserts
Individual inserts are
compatible with keystone
jacks. Hex opening accepts
all Adaptiplate™ hex connector inserts. Blank inserts
provide professional appearance by covering unused
keystone openings.
MCM Part #
50-10175
50-10176
50-10780
50-10781
Type
Blank
Blank
Hex Opening
Hex Opening
Color
White
Ivory
White
Ivory
(1-3)
$0.29
0.29
0.39
0.39
(4-11) (12-up)
$0.25 $0.20
0.25 0.20
0.35 0.30
0.35 0.30
Adaptiplate™ Decora Inserts
Multiple configurations allow you to select from
one to eight connectors in a single gang plate size.
Use alone or combine with others to provide exactly
the plate configuration needed. Available in white
or ivory, these inserts are compatible with standard
decora wall plate covers. Accepts all Adaptiplate™
A/V hex connectors.
A
B
Stainless Steel HDMI Wall Plates
Single gang stainless steel wall plates provide one or
two HDMI pass-through ports, and provide a clean
look in any residential or commercial installation.
Features: •HDMI 1.4 compatible •Gold plated
connectors •Screws included •Mounting depth: 7⁄8"
Fig.
A
B
MCM Part #
50-10090
50-10092
HDMI Ports
One Two
ONLY
$9.99
16.99
MCM Part # Openings Color
50-10000
One
White
50-10005
Two
White
50-10006
Two
Ivory
50-10010
Three White
50-10011
Three Ivory
50-10015
Four
White
50-10016
Four
Ivory
50-10020
Six
White
50-10021
Six
Ivory
50-10025
Eight White
50-10026
Eight
Ivory
(1-3)
$0.99
0.99
0.99
0.99
0.99
0.99
0.99
0.99
0.99
0.99
0.99
(4-11) (12-up)
$0.89 $0.85
0.89
0.85
0.89
0.85
0.89
0.85
0.89
0.85
0.89
0.85
0.89
0.85
0.89
0.85
0.89
0.85
0.89
0.85
0.89
0.85
Adaptiplate™ Decora Covers
Single and multi gang covers
are compatible with all decora
style devices. These are intended
to provide perfect color match desired when using
Adaptiplate™ hex and keystone wall plates.
MCM Part #
50-10100
50-10101
50-10105
Gang
One
One
Two
Color
White
Ivory
White
www.MCMelectronics.com /1-800-543-4330
(1-3)
$0.89
0.89
1.19
(4-11)
$0.79
0.79
1.09
(12-up)
$0.69
0.69
0.99
115
1
Audio/Video
A/V Distribution
EZ-SnapJack RJ45
Keystone Inserts
Wall Plates
Much like the EZ-RJ45 connectors, these
keystone jacks are incredibly easy to install,
and are a perfect match to the Adaptiplate™
keystone wall plates. Simple self-terminating
re-usable two-piece design requires no
punch-down tool. Just strip the outer jacket,
put the conductors through the removable
color coded wire guide, trim any excess,
insert the wire guide into the jack, and
snap it together. Sold individually.
Adaptiplate™ A/V Hex
Connector Inserts
Specially designed RCA to “F” adapter inserts
greatly eases installation of specific A/V cables in a
distributed system. Rear “F” connection allows easy
incorporation of RG-6 or RG-59 cable for A/V runs.
These cable types are perfectly suitable for composite
video, Y/Pr/Pb component video, line level and digital
audio, and typically provide improved performance
over pre-terminated RCA style cables. All connectors
sold individually.
MCM Part # Insert Color
50-10830
Red
50-10831
Green
50-10832
Blue
50-10833
Yellow
50-10834
Orange
50-10835
White
50-10836
Black
(1-3)
$1.79
1.79
1.79
1.79
1.79
1.79
1.79
(4-11)
$1.59
1.59
1.59
1.59
1.59
1.59
1.59
MCM Part #
Category 5e Jacks
50-10920
50-10921
50-10922
50-10923
50-10924
50-10925
50-10926
50-10927
50-10928
50-10929
A
B
Intended for speaker
connections, these binding
post inserts are compatible with all Adaptiplate™
wall plates and hex inserts. Connector front accepts
standard banana plugs, or bare wire up to 12AWG.
Connector rear securely holds wire up to 12AWG via
setscrew. Color coded red and black, binding posts are
sold in pairs.
(1-3 prs.)
$3.99
(4-11 prs.)
$3.59
(12 prs.-up)
$3.19
Keystone Voice and Data Inserts
Intended for use with the
Adaptiplate™ Keystone Decora
Inserts, these voice and data inserts
are also compatible with most keystone
wall plates. Intended for telephone and
LAN connections, they are ideal for use
with the MCM Custom Audio Cat 5
Balun system. RJ-45 connector is Cat
5e rated. RJ-11 connector is 6P6C (six-conductor) type
and is compatible with standard single, two and three
line telephone wiring configurations.
116
Type RJ-45
RJ-45
RJ-11
RJ-11
Almond
Black
Blue
Brown
Green
Ivory
Light almond
Orange
Red
White
$4.11
4.34
4.11
4.11
4.11
4.11
4.11
4.11
4.11
4.34
C
D
H
J
MCM Part #
Category 6 Jacks
50-10940
50-10941
50-10942
50-10943
50-10944
50-10945
50-10947
50-10948
50-10949
50-10950
A
E
G
K
Color
White
Ivory
White
Ivory
B
Color
ONLY
Almond
Black
Blue
Brown
Green
Ivory
Orange
Red
White
Yellow
$4.75
4.62
4.62
4.75
4.75
4.75
4.62
4.62
4.75
4.62
C
D
E
L
Adaptiplate™ Compatible
Category 5e Keystone Jacks
Adaptiplate™ Binding
Post Hex Inserts
MCM Part #
50-10790
50-10791
50-10795
50-10796
ONLY
(12-up)
$1.49
1.49
1.49
1.49
1.49
1.49
1.49
F
MCM Part #
50-10810
Color
(1-3) (4-11) (12-up)
$1.99 $1.79 $1.59
1.99 1.79 1.59
1.79 1.59 1.39
1.79 1.59 1.39
High-performance jacks feature color-coded wiring
labels for T568A and T568B data cables, and are UL
listed.
Fig.
A
B
C
D
E
F
G
H
J
K
L
MCM Part #
50-10960
50-10961
50-10962
50-10963
50-10964
50-10965
50-10966
50-10967
50-10968
50-10969
50-10970
Color
ONLY
Almond
$2.77
Black
2.77
Blue
2.77
Brown
2.77
Gray
2.77
Ivory
2.77
Light Almond
2.77
Orange
2.77
Red
2.77
White
2.77
Yellow
2.77
#50-10159
#50-10158
G
H
J
K
Adaptiplate™ Compatible
Category 6 Keystone Jacks
High-performance jacks feature color-coded wiring
labels for T568A and T568B data cables, and are UL
listed.
Fig.
A
B
C
D
E
F
G
H
J
K
MCM Part #
50-10980
50-10981
50-10982
50-10983
50-10984
50-10985
50-10986
50-10987
50-10988
50-10989
Color
Almond
Black
Blue
Brown
Gray
Ivory
Light Almond
Orange
Red
White
ONLY
$4.11
4.11
4.11
4.11
4.11
4.11
4.11
4.11
4.11
4.11
3.5mm
Keystone Jack
VGA Decora Wall
Plate Inserts
Three conductor 3.5mm coupler can be easily
incorporated into Adaptiplate™ or other standard
keystone wall plates. Gold plated contacts ensure
long term performance and reliability.
Feed-through
connectors.
MCM Part #
50-10158
50-10159
F
Description
Single
Dual
ONLY
$5.65
9.26
www.MCMelectronics.com /1-800-543-4330
MCM Part #
50-10125
ONLY
$4.55
Follow us on:
&
1
A/V Distribution
Audio/Video
Standard Faceplates
Category 6 Modular Keystone Jacks
•Patented design uses innovative crosstalk
cancellation technology •Provides sufficient margin
over TIA category 6 requirements •Unique strain
relief design secures cable terminations •Configured
with both 568A and 568B wiring schemes
•Individually bagged
MCM Part #
831-1984-BLK
831-1984-BLU
831-1984-GRN
831-1984-I
831-1984-ORN
831-1984-RED
831-1984-W
Mfr. #
RJ45FC6-BLK
RJ45FC6-BLU
RJ45FC6-GRN
RJ45FC6-I
RJ45FC6-ORN
RJ45FC6-RED
RJ45FC6-W
Color
Black
Blue
Green
Ivory
Orange
Red
White
(1-9)
$5.71
5.71
5.71
5.71
5.71
5.71
5.71
(10-up)
$5.46
5.46
5.46
5.46
5.46
5.46
5.46
Category 5e
Keystone Jacks
•Designed for
T568A or T568B
wiring applications
•110 type punchdown connections with cable tie to
secure cable •Snap into wall plates or surface mount
boxes for easy installation
MCM Part #
831-2125
831-2126
831-2127
831-2129
831-2132
831-2368
Color
Yellow
Green
White
Blue
Red
Ivory
(1-49)
$0.99
0.99
0.99
0.99
0.99
0.99
(50-up)
$0.92
0.92
0.92
0.92
0.92
0.92
•Accepts any Hellermann Tyton modular jack •Provided in ivory, office white,
and stainless steel •Standard keystone style interface •Offered in single and
dual gang •Offered in up to 12 port configurations •2, 4, 6 port faceplates are
available with identification windows that cover up the mounting screws
MCM Part #
831-2007-I
831-2007-W
831-2008-FW
831-2008-I
831-2008-W
831-2009-I
831-2009-W
831-2010-FW
831-2010-I
831-2010-W
831-2011-FW
831-2011-I
831-2011-W
831-2012-W
831-2013-FW
831-2013-I
831-2013-W
831-2014-W
831-2016-I
831-2016-W
Stainless Steel
831-2017-SS
831-2020-SS
831-2021-SS
Mfr. #
FPSINGLE-I
FPSINGLE-W
FPDUAL-FW
FPDUAL-I
FPDUAL-W
FPIDUAL-I
FPIDUAL-W
FPTRIPLE-FW
FPTRIPLE-I
FPTRIPLE-W
FPQUAD-FW
FPQUAD-I
FPQUAD-W
FPIQUAD-W
FPSIX-FW
FPSIX-I
FPSIX-W
FPISIX-W
FPDG12-I
FPDG12-W
Description
Single port faceplate
Single port faceplate
Dual port faceplate
Dual port faceplate
Dual port faceplate
Dual port faceplate with ID window
Dual port faceplate with ID window
Triple port faceplate
Triple port faceplate
Triple port faceplate
Quad port faceplate
Quad port faceplate
Quad port faceplate
Quad port faceplate with ID window
Six port faceplate
Six port faceplate
Six port faceplate
Six port faceplate with ID window
12 port dual gang faceplate
12 port dual gang faceplate
Color
Ivory
White
Office white
Ivory
White
Ivory
White
Office white
Ivory
White
Office white
Ivory
White
White
Office white
Ivory
White
White
Ivory
White
(1-9)
$1.46
1.46
1.56
1.56
1.56
1.56
1.56
1.46
1.46
1.46
1.46
1.46
1.46
1.56
1.46
1.46
1.46
1.56
3.63
3.63
(10-up)
$1.20
1.20
1.31
1.31
1.31
1.31
1.31
1.20
1.20
1.20
1.20
1.20
1.20
1.31
1.16
1.20
1.20
1.31
3.40
3.40
FPDUAL-SS
FPDGSIX-SS
FPDG12-SS
Dual port stainless steel faceplate Six port dual gang stainless steel faceplate
12 port dual gang stainless steel faceplate
-
-
-
2.59
3.63
4.67
2.28
3.30
4.39
QuickPort® Blank Inserts
QuickPort® Snap-In
Telephone Jack Modules
Compatible with all QuickPort®
wall plates, these blank inserts are
used to fill unused ports, allowing
for easy future expansion.
MCM Part #
502-41084-BWB
502-41084-BIB
Base Color
White
Ivory
ONLY
$0.30
0.30
MCM Part #
502-41106-RW6
502-41106-RI6
QuickPort®
Decora
Inserts
These single gang Decora inserts offer field–configurable
flexibility in an attractive single piece housing. A
choice of 2, 3, 4, or 6 ports allows for a variety of
configurations and future expansion. All inserts are
fully compatible with all QuickPort® snap–in modules,
and are UL listed and CSA certified. Use with all
Decora style wall plates.
MCM Part #
502-41644-I
502-41646-I
502-41642-W
502-41643-W
502-41644-W
502-41646-W
502-41644-GY
Compatible with all QuickPort®
wall plates, these RJ-11/12 type
6 pin connectors are Cat 3 rated
for voice use, and are compatible with conventional
single, two and three line telephone connections.
Connectors are labeled for both T568A and T568B
wiring configurations. All modules meet or exceed
industry standards and are fully compliant with
published TIA-568-A requirements.
Ports
Four
Six
Two Three
Four
Six
Four
Color
Ivory
Ivory
White
White
White
White
Gray
ONLY
3.59
4.11
4.11
4.11
4.99
4.11
4.11
A
Base Color
White Ivory
ONLY
$3.08
3.08
B
QuickPort® Snap–In Modules
Compatible with all QuickPort® wall
plates, these RJ-45 and type connectors are Cat
3, Cat 5 and Cat 6 rated and feature a permanent
laser engraved label. Rated for voice use, and are
compatible with conventional single, two and three
line telephone connections.Connectors are labeled
for both T568A and T568B wiring configurations.
All modules meet or exceed industry standards
and are fully compliant with published TIA-568-A
requirements. White base color.
Fig. MCM Part #
Description Type
Pins ONLY
A 502-41108-RW5 Cat 5
RJ-45
8 $4.34
B 502-41106-RW6 Cat 3
RJ-11/12 6
3.08
QuickPort® Snap–In
“F” Connector Modules
Compatible with all QuickPort®
wall plates, these gold plated “F”
connector inserts are F-81 type, and will
accept a male “F” connector on both sides.
MCM Part #
502-40831-BW
502-40831-BA
Base Color
White
Almond
www.MCMelectronics.com /1-800-543-4330
ONLY
$3.27
3.08
117
1
Audio/Video
A/V Distribution
Wall Plates
B
A
C
D
E
F
QuickPort® Single Gang
Wall Plates
G
Keystone Multimedia Modules
•Adapts to Hellermann Tyton faceplates, surface mount boxes, and modular
patch panels •Available in three colors - ivory, office white and white
Fig.
MCM Part #
Mfr. #
A
831-2028-I
BNCINSERT-I
A
831-2028-W
BNCINSERT-W
A
831-2028-BK
BNCINSERT-BK
B
831-2029-I
FIBERINSERT-I
C
831-2030-FW
FINSERT-FW
C
831-2030-I
FINSERT-I
C
831-2030-W
FINSERT-W
D
831-2031-FW
BLANKINSERT-FW
D
831-2031-I
BLANKINSERT-I
D
831-2031-W
BLANKINSERT-W
D
831-2031-B
BLANKINSERT-B
D
831-2031-BK
BLANKINSERT-BK
E
831-2032-FW
RCAINSERTY-FW
E
831-2032-I
RCAINSERTY-I
E
831-2032-W
RCAINSERTY-W
E
831-2033-I
RCAINSERTR-I
E
831-2034-FW
RCAINSERTB-FW
E
831-2034-I
RCAINSERTB-I
—
831-2352-W
RCAFINSERTBL-W
—
831-2353-W
RCAFINSERTG-W
—
831-2354-W
RCAFINSERTY-W
—
831-2355-W
RCAFINSERTB-W
F
831-2035-W
RCAFINSERT-W
—
831-2357-W
RCAW110-W
G
831-2036-I
RCAR110-I
G
831-2037-W
S110INSERT-W
Colors = FW(office white), I(ivory), W(white)
Description
Female to female BNC connector
Female to female BNC connector
Female to female BNC connector
ST multimode/single mode fiber optic connector Female to female “F” connector for CATV
Female to female “F” connector for CATV
Female to female “F” connector for CATV
10 pk blank inserts
10 pk blank inserts
10 pk blank inserts
10 pk blank inserts brown
10 pk blank inserts black
RCA female to female with yellow stripe
RCA female to female with yellow stripe
RCA female to female with yellow stripe
RCA female to female with red stripe
RCA female to female with black stripe
RCA female to female with black stripe
RCA to “F” connector with blue stripe
RCA to “F” connector with green stripe
RCA to “F” connector with yellow stripe
RCA to “F” connector with black stripe
RCA to “F” connector with red stripe
RCA to 110 punchdown block with white stripe
RCA to 110 punchdown block
S video to 110 punchdown block Data Feed–Through
White “F” Type Keystone Jack
•Female to female couplers that snap into
wall plates for professional installations
MCM Part #
831-1736
(1-9)
$1.14
(10-up)
$0.94
QuickPort® Snap–In
RCA Modules
Compatible
with all QuickPort® wall
plates, these RCA type phono
connections are ideal for baseband video,
line level audio and other RF applications. Modules
are available in white, ivory or almond, and are color
coded with red or black stripe for easy L/R audio
channel identification. RCA connection is female on
both ends.
MCM Part #
502-40830-BWE
502-40830-BWR
502-40830-BWY
502-40830-BIY
118
Base Color
White
White
White
Ivory
Stripe Color
Black
Red
Yellow
Yellow
ONLY
$3.59
3.59
3.59
3.59
(1-9)
$4.67
4.67
4.67
6.23
2.19
2.19
2.19
2.59
2.59
2.59
2.59
2.59
3.45
3.63
3.63
3.63
3.45
3.63
3.63
3.63
3.63
3.63
3.63
3.63
3.63
3.11
(10-up)
$4.21
4.21
4.21
5.90
1.92
1.92
1.92
2.40
2.40
2.40
2.40
2.40
3.31
3.47
3.47
3.47
3.31
3.37
3.30
3.30
3.30
3.30
3.47
3.30
3.47
-
QuickPort® Snap–In
Binding Posts
Compatible with all
QuickPort® wall plates, these color coded binding
post connections are suitable for bare speaker wire
connection, or insertion of standard banana plugs.
Modules are available in white and ivory and are
color coded with red or black stripe for easy polarity
identification.
MCM Part #
502-40833-BWE
502-40833-BWR
502-40833-BIR
Base Color
White
White
Ivory
Color
Black
Red
Red
ONLY
$4.11
4.11
4.11
Flush mount wall plates offer field–configurable
flexibility in an attractive single piece housing. A
choice of 1, 2, 3, 4, or 6 ports allows for a variety of
configurations and future expansion. All wall plates
are fully compatible with all QuickPort® snap–in
modules, and are UL listed, CUL certified and in
compliance with NEC Article 800.
MCM Part #
502-41080-1WP
502-41080-1IP
502-41080-1EP
502-41080-2WP
502-41080-2IP
502-41080-2AP
502-41080-2EP
502-41080-3WP
502-41080-3IP
502-41080-3AP
502-41080-3EP
502-41080-4WP
502-41080-4IP
502-41080-4AP
502-41080-6WP
502-41080-6IP
502-41080-6AP
502-41080-6EP
Ports
One
One
One
Two
Two
Two
Two
Three
Three
Three
Three
Four
Four
Four
Six
Six
Six
Six
Color
White
Ivory
Black
White
Ivory
Almond
Black
White
Ivory
Almond
Black
White
Ivory
Almond
White
Ivory
Almond
Black
ONLY
$1.54
1.44
1.71
1.64
1.64
1.53
1.44
1.44
1.54
1.71
1.54
1.54
1.64
1.97
1.54
1.97
1.44
1.03
Decora Wall Plates
White and ivory wall plates are
available in single, double, three and four gang style.
Compatible with all Decora™ wall switches, receptacles
and connectors. They are also compatible with all
MCM Custom Audio home theater wall plates and
volume controls.
MCM Part # Type
50-5871
1 gang
50-5876
2 gang
50-5881
2 gang
50-5891
3 gang
50-5901
4 gang
Color
White
White
Ivory
White
White
(1-9)
$0.82
1.86
1.86
3.42
6.54
(10-99) (100-up)
$0.70
$0.59
1.69
1.37
1.69
1.37
3.17
2.53
6.04
4.66
Heavy-Duty Blank Wall
Plates
High-quality specification
grade commercial wall
plates are also perfect for drilling or cutting for
custom applications. Slightly larger “Midway”
size allows these plates to cover standard or larger
volume boxes, or cover wall irregularities in old work
applications. Available in white or ivory.
Discod coopin, filler?
www.MCMelectronics.com /1-800-543-4330
MCM Part #Type
50-5867 1 gang
50-5872 1 gang
50-5877 2 gang
50-5882 2 gang
Color
Ivory
White
Ivory
White
(1-9)
$0.93
0.93
1.97
1.97
Follow us on:
(10-99) (100-up)
$0.79 $0.69
0.79
0.69
1.69
1.47
1.69
1.47
&
1
A/V Distribution
4 x 4 Pin Jack to 4 Pin Plug
“T” Adapters
Audio/Video
Category 5 Surface
Mount Keystone
Boxes
MCM
Part # Color (1-9) (10-49)(50-up)
36-040 Ivory $1.24 $1.03
36-041 White 1.13 0.95 $0.84
•Punch-down terminals
•Includes mounting hardware
•One or two RJ-45 female jacks
MCM Part #
831-1345
831-1350
Surface Mount
Telephone
Jacks
Outlets
1
2
(1-9)
$4.99
8.99
(10-up)
$4.19
7.99
Low profile jack
mounts directly
to baseboard or
any flat surface, and includes cover.
Ideal for most voice and low speed
data applications. Screw terminals.
#36-105, 36-106 are keyed and
include shorting bar.
MCM Part #
36-100
36-101
36-103
36-104
36-105
36-106
Recessed
Multimedia Wall Plates
These wall plates are perfect
when pre-terminated cables
are routed through the wall,
or when large numbers of
cables make termination at
the wall plate impractical.
Recessed opening directs cables at a 90º angle,
without protruding, allowing equipment to be placed
close to the wall. The recessed commercial grade
AC receptacle allows connection of large AC plugs,
without protruding from the wall. Perfect for use
behind flat panel TVs or large A/V equipment. Rigid
ABS plates are available in white or gray. Matching
screws are included.
MCM Part #
50-8817
50-8819
Color PinsCompatibility(1-9)(10-49) (50-up)
Ivory 4RJ-11/14
$1.13 $0.95 $0.84
White 4RJ-11/14
1.29 1.08 0.96
Ivory 6RJ-11/12/14 1.34 1.18 1.00
White 6RJ-11/12/14 1.34 1.15 0.98
Ivory 8RJ-45/31/38X 1.66 1.47 1.32
White 8RJ-45/31/38X 1.66 1.47 1.32
Bell Type Phone Mount
•For easy mounting of Bell type
wall phones •USOC RJ-11 type
•Stainless steel cover
MCM Part # (1-9) (10-49) (50-up)
36-490
$5.09 $4.87 $4.34
Color
White
Gray
(1-9)
$21.62
21.62
(10-19)
$20.11
20.11
Multi-Gang Recessed Electrical Box
Highly versatile electrical box is specifically designed
for installation behind large flat panel televisions.
It is also perfect for use behind entertainment centers
or other furniture that will be placed close to the
wall. Recessed design ensures AC plugs and other
A/V connectors do not extend past the wall surface.
Features: •Rigid ABS design •Four total gang spaces
available •Space for two duplex AC receptacles, or use
included divider for one duplex AC outlet and one low
voltage outlet •Two additional spaces for low voltage
outlets •Fits between 16" on-center studs •Textured,
paintable trim plate is removable, enabling old or new
work installation •May be mounted horizontally or
vertically
MCM Part #
50-8815
(1-3)
$21.62
(4-5)
$19.04
Power Jumper™
Power Relocation
Kit
Pre-wired and
requiring no
electrical wiring
by the installer,
the Power Jumper
provides a duplex receptacle for behind the screen,
and an IEC receptacle is located below in the same
stud bay. Power is supplied by simply plugging in the
included IEC power cord into the power inlet and the
other end into a remote surge protector or electrical
receptacle nearby. Features: •7', 14-2 AWG 15A romex
cable •Mounts to recessed low voltage brackets (not
included) •ETL listed, UL Rated 817, CSA# 22.2#21
•NEC Code Compliant •Mfr. #PJW-7R
MCM Part #
50-14045
#33-020
#33-770
#33-1455
(20-up)
$18.83
-
ONLY
$69.99
#33-775
Wall Plates
MCM Part # Color
33-020
Beige
33-8485
White
33-1455
Beige
33-770
Beige
33-8495
White
33-775
Beige
Description
75ohm in/out
75ohm in/out
Dual hex inset
Single hex inset
Single hex inset
Blank with dual
hex inset
(1-4)
$1.02
1.02
0.40
0.40
0.32
0.36
(5-9)
$0.92
0.92
0.36
0.33
0.31
0.35
Pass Through Wall Plates
with Power Receptacle
4Available with surge protection and without
•Modular coupler
female-female •Ivory
•Double gang wall plate provides pass through for low
voltage cables, as well as a dual receptacle power outlet
Features: •Old work electrical box included •15A UL
listed duplex receptacle included •Mounting wings
for retrofit are integrated on the wall plate
•Surge protection: 340 joules
MCM
Part # Pins (1-9) (10-49)(50-up)
36-260 4 $1.86 $1.59 $1.47
36-605 6 2.38 2.21 2.01
36-610 8 1.54 1.26 1.15
MCM Part # Mfr. #
Description
ONLY
50-14210 45-0031-WH Without surge protection $25.74
50-14215 45-0041-WH With surge protection
51.49
50-14216 45-0041-SB Replacement surge
13.38
block for #50-14215
In-Line Phone Coupler
Four Gang Recessed Media Boxes
Recessed media boxes provide pass through
access for low voltage cables. They also provide
a concealed location for mounting a dual power
receptacle or a low voltage single gang wall plate.
•Dimensions: 4½" (H) x 8½" (W) x 6½" (D)
•Mfr. #45-0010
MCM Part #
50-14200
50-14201
www.MCMelectronics.com /1-800-543-4330
Color
White
Black
ONLY
$30.89
30.89
119
1
Audio/Video
A/V Distribution
Wall Plates
Power Port Kit
#50-10910
#50-10900
Swingplate™ Feed Through
Wall Plates
Decor Receptacle and Power Inlet Kit
Use MIDLITE®’s innovative patent pending decor
recessed receptacle and power inlet, 125V, 15A to
install power behind your flat panel TV and audio and
video devices. Features: •Provides an affordable power
solution for wall mounted flat panel TVs •Perfect
for retro-fit construction projects •Fits in standard
14 cubic inch electric box •Can be used with remote
surge/power conditioner to HDTV •Available in white,
light almond, ivory, and black Includes: •1-gang decor
recessed receptacle •1-gang decor recessed power inlet
•Two 1-gang work boxes •6' 14 gauge, 15A black power
cord
MCM Part #
28-11088
28-11091
Mfr. #
A46-W
A46-B
Color
White
Black
ONLY
$55.09
55.09
Designed specifically for the A/V installation industry,
this unique feed through wall plate features a swivel
door for ease of use and improved appearance. It is
ideal for situations where multiple cables are to pass
through a finished wall, and not terminated at the
plate. This is especially useful in pre-wire applications,
as the wire can remain tucked into the wall, with the
swing door neatly closed, until it is time to install
equipment. Available in single or double gang sizes,
plates are white color, and are compatible with
standard electrical boxes and low voltage brackets.
Call for larger quantity pricing.
MCM Part #
50-10900
50-10910
Size
Single
Double
(1–3)
$1.59
2.19
(4–11)
$1.45
1.99
(12–24)
$1.25
1.69
MCM Part #
Receptacles
28-11092
28-11093
28-11094
28-11095
Inlets
28-11096
28-11097
28-11098
28-11099
120
Mfr. #
Color
ONLY
4641-W
4641- I
4641- LA
4641-B
White
Ivory
Light Almond
Black
$11.32
11.32
10.80
11.32
4642-W
4642-I
4642-LA
4642-B
White
Ivory
Light Almond
Black
25.74
25.74
25.74
25.74
MCM Part #
28-11100
28-11101
28-11102
28-11103
Mfr. #
A2GESR-W
A2GESR-I
A2GESR-LA
A2GESR-B
Two Piece
Feed Through
Wall Plates
Popular wall plates allow
a large number of cables
to be fed to a system,
without requiring
termination at the plate.
Features: •Unique two piece
design •Allows the nose to
be placed inside or outside the wall •Cables can be fed
through the opening
prior to installing the nose
MCM Part #
Single Gang
50-14600
50-14601
50-14602
50-14603
Double Gang
50-14605
50-14606
50-14607
50-14608
Color
ONLY
Almond
Black
Ivory
White
$1.99
1.99
1.99
1.99
Almond
Black
Ivory
White
$2.99
2.99
2.99
2.99
www.MCMelectronics.com /1-800-543-4330
Color
White
Ivory
Light almond
Black
ONLY
$58.18
58.18
58.18
58.18
Wireport™ Grommet
Pass-Through Wall Plates
The grommet blocks the view of
the wall interior as well as holds
cable in place prior to connection to
equipment.
MCM Part #
Gang
Wall plate with grommet
50-9090
Single
50-9091
Single
50-9092
Single
50-9093
Single
50-9200
Double
50-9201
Double
50-9202
Double
50-9203
Double
Décor Receptacle
and Power Inlets
Use MIDLITE®’s
innovative patent
pending décor
recessed receptacle
and power inlet to
install power behind
your flat panel TV
Receptacle
Inlet
and audio and video
devices. 125V, 15A. •Provides an affordable power
solution for wall mounted flat panel TVs •Perfect for
retro-fit construction projects •Fits in standard 14
cubic inch electric box •Can be used with remote surge/
power conditioner to HDTV •Available in white, light
almond, ivory, and black
Use MIDLITE®’s
innovative patent
pending Power+Port™
Kit—HDTV power
solution to install
power and A/V
cables behind your
flat panel TV and
audio/video devices.
125V, 15A. Features: •Provides an affordable power
solution for wall mounted flat panel TVs •Perfect
for retro-fit construction projects •Fits in standard
14 cubic inch electric box •Can be used with remote
surge/power conditioner to HDTV •Available in white,
light almond, ivory, and black Includes: •One 2 gang
splitplate end, recessed receptacle and wireport with
grommet •One 2 gang splitplate end, power inlet and
wireport with grommet •Two 2 gang dual voltage retro
work PVC boxes •6' 14 gauge, 15A black power cord
Color
(1-3)
(4-up)
White
Ivory
Black
Almond
White
Ivory
Black
Almond
$4.62
4.62
4.62
4.62
5.14
5.14
5.14
5.14
$4.14
4.14
4.14
4.14
4.56
4.56
4.56
4.56
Recessed Cable
Pass Through
Wall Plates
These wall plates
are perfect when
pre–terminated cables
are routed through
the wall, or when
large numbers of
Single
cables make termination
Double
at the wall plate impractical.
Recessed opening directs cables at a 90° angle, without
protruding, allowing equipment to be placed close
to the wall. Rigid ABS plates are available as single
or double gang size in white, light ivory or brown.
Matching screws are included.
MCM Part #Gang 50-8800 Single
50-8801 Single
50-8802 Single
50-8805 Double
50-8806 Double
50-8807 Double
Color
(1–9) (10–19) (20–up)
Brown
$3.21 $2.65 $2.17
Light ivory 3.42 2.85 2.43
White
3.42 2.85 2.43
Brown
5.29 4.23 3.49
Light ivory 5.61 4.55 3.81
White
5.61 4.55 3.81
Follow us on:
&
1
A/V Distribution
Audio/Video
Duplex Receptacle
Plate with Wireport™
This series of wall plates
provides all of the same
benefits of the highly
popular Wireport™
grommet series plates, while
simplifying installations near an AC outlet. It is
perfect for installation behind entertainment centers
and wall mounted television monitors. The grommet
Wireport™ side allows several A/V or network
cables to pass through, while receptacle side powers
equipment, all from a double gang space. Note: AC
wiring and low voltage A/V cable must not
be installed in the same electrical box. Use of these
wall plates requires use of a power/low voltage
combo box, such as our #28-10670 or 28-10675.
See MCMelectronics.com for more information.
MCM Part #
50-10315
50-10316
50-10317
50-10318
Color
White
Light almond
Ivory
Black
(1-3)
$5.83
5.83
5.83
5.83
(4-up)
$5.19
5.19
5.19
5.19
Decora Pass
Through Wall Plates
These decora inserts are perfect when
pre-terminated cables are routed
through the wall, or when large
numbers of cables make termination
at the wall plate impractical. Insert
is compatible with standard decora
cover plates, allowing these to be
combined with existing connector
plates. Slotted opening is large enough
to pass most DVI cable connectors.
Opening is angled at 90° allowing
equipment to be placed close to the
wall. Available in white and ivory,
matching screws included.
MCM Part #
50-7405
50-7406
Color
White
Ivory
(1-9)
$6.21
5.87
(10-19)
$5.59
5.28
(20-up)
$5.23
4.94
Splitport™ Cable
Pass–Through Plates
Ideal for wiring installations
where multiple cables are
to pass through a finished
wall, and not terminated
at the plate. Perfect when
pre–assembled or fiber cable is
routed through walls, or when large
numbers of cables make termination
at the wall plate impractical. Split
plate design eases cables terminated
with large connectors and enables plate to be installed
after all connections are made. Available in white,
ivory, black and almond.
MCM Part #
50-7920
50-7921
50-7922
50-7923
50-7925
50-7926
50-7927
50-7928
Type
Single gang
Single gang
Single gang
Single gang
Double gang
Double gang
Double gang
Double gang
Color
White
Almond Ivory
Black
White
Almond
Ivory
Black
(1–3)
$4.46
4.46
4.46
4.46
5.14
5.14
5.14
5.14
(4–up)
$4.03
4.03
4.03
4.03
4.67
4.67
4.67
4.67
Cable Pass Through Wall Plates
#50-6890
#50-6895
#50-6900
#50-6899
#50-6894
Wireport™ Cable
Pass–Through Plates
Ideal in home theater and commercial sound
applications where multiple cables are to pass through
a finished wall, and not terminated at the plate.
Perfect when pre–assembled or fiber cable is routed
through walls, or when large numbers of cables make
termination at the wall plate impractical. Available
in white, ivory, black and almond, as a single or
double gang plate, or as a single Decora insert.
MCM Part #
50-6890
50-6891
50-6892
50-6893
50-6894
50-6895
50-6896
50-6897
50-6899
50-6900
50-6901
50-6902
50-6903
Type
Single gang
Single gang
Single gang
Single gang
Single gang Double gang
Double gang
Double gang
Double gang
Decora
Decora
Decora
Decora
Color
(1–3) (4–up)
White
$3.59 $3.34
Ivory
3.59 3.34
Black
3.59 3.34
Almond
3.59 3.34
Light almond 3.59 3.34
White
4.11 3.77
Ivory
4.11 3.77
Black
4.11 3.77
Light almond 4.11 3.77
White
3.74 3.49
Ivory
3.74 3.49
Black
3.74 3.49
Almond
3.74 3.49
These wall plates are perfect when pre-terminated
cables are routed through the wall, or when large
numbers of cables make termination at the wall
plate impractical. Low profile flat opening allows
equipment to be placed close to the wall and will fit
behind virtually all plasma screen monitors. Rigid
ABS plates are available as single or double gang size
and are available in white and almond.
MCM Part #Gang 50-9000 Single
50-9001 Single
50-9005 Double
50-9006 Double
A
Color
White
Almond
White
Almond
(1-9) (10-19) (20-up)
$3.60 $2.98 $2.44
3.21
2.65
2.17
5.93
4.74
3.92
5.29
4.23
3.49
B
C
D
Economy Old Work Low Voltage
Wall Mounting Brackets
Perfect for quickly preparing the final remote wallplate connection for many types of audio/video,
security, CCTV and network products in existing
buildings. These metallic and plastic brackets are ideal
for any low voltage class 2 application. •Features:
Adjusts to fit 1⁄4'' to 1'' thickness •Horizontal or vertical
mounting •Thin front lip seats better on drywall, keeps
plate flush to wall.
Fig. MCM Part #
A 28-11080
B 28-11081
C 28-11085
D 28-11086
Description
Single gang metallic
Dual gang metallic
Single gang plastic
Dual gang plastic
(1-9) (10-up)
$1.03 $0.88
1.34
1.21
1.03
0.88
1.34
1.21
Cable PassThrough Wall
Plates
These wall plates
are perfect when
pre–terminated
cables are routed
through the wall,
or when large numbers of cables make termination at
the wall plate impractical. Opening is angled at 90°
allowing equipment to be placed close to the wall.
Rigid ABS plates are available as single or double
gang size and are available in white, ivory, black and
almond. Matching screws are included.
MCM Part # Gang Color
50-7390
Single White
50-7391
Single
Ivory
50-7392
Single Black
50-7393
Single Almond
50-7395
Double White
50-7396
Double Ivory
50-7397
Double Black
50-7398
Double Almond
(1–9)
$3.62
2.52
3.42
2.95
7.95
4.06
4.31
4.06
(10–19) (20–up)
$3.02 $2.57
2.23 1.96
2.75 2.32
2.61 2.29
6.45 5.40
3.69 3.25
3.92 3.44
3.69 3.25
Old Work Mounting Plate Brackets
Perfect for use when installing many types of
audio/video, security, CCTV and network products
into existing buildings. These metallic brackets are
ideal for any low voltage Class 2 application. Features:
•Fast, easy installation with only a drywall saw and
screwdriver •Positive support with included locking
screws •Mounts any standard low voltage device in
walls from 1⁄2"~11⁄4" thickness •Open back design for
easy routing of cables •Models available for single
or double gang wall plates
MCM Part #
502-MPLS
502-MPLS2
Size
Single gang
Double gang
www.MCMelectronics.com /1-800-543-4330
ONLY
$2.17
3.84
121
1
Audio/Video
A/V Distribution
Wall Plates
Low Voltage
Wall Mounting
Brackets
These brackets
accept any single or
dual gang wall plate.
May be used for any
Class 2 low voltage
wiring application
that does not require
an electrical box.
Open back design
provides easier
routing of cables,
especially larger
diameter coax.
Non–Metallic
Mounting Plate Brackets
Perfect for installing A/V, security
and network products into existing
buildings, these non–metallic
brackets are ideal for any low
voltage Class 2 application.
Features: •Serrated interlocking
system •Fast, secure installation
in existing opening with no tools
•Template points on brackets eliminate
multiple measurement markings during installation
•Mounts standard low voltage device in walls from
1
⁄4"~11⁄4" thickness •Open back design for easy routing
of cables •#502-MP34P may be used with three
or four gang applications
MCM Part # Size
502-MP1P Single gang
502-MP34P Three/four gang
(1–9) (10–99) (100–up)
$1.54 $1.34
$1.16
11.99
-
-
New Work Applications Only
Units include captive nails, and large mounting tabs,
allowing use with metal or wood studs.
MCM Part # Description
28-17140
Single gang
28-17145
Double gang
(1–3)
$2.57
3.93
(4–9) (10–up)
$2.41 $2.18
3.69
3.34
Old work applications
Units include rotating clips to securely attach to
existing wallboard. Only tools required are a drywall
saw and Philips head screwdriver.
MCM Part # Description
28-17175
Single gang
28-17180
Double gang
(1–3)
$1.90
3.14
(4–9) (10–up)
$1.78 $1.61
2.95
2.67
New Construction
Mounting Brackets
Perfect for use in many
types of audio/video,
security, CCTV and
network installations,
these brackets are ideal for any low voltage Class 2
application. Features: •Open back design for easy
routing of cables •Bendable tabs for cable tie-off or 3⁄4"
conduit stubbing •Factory punched holes for vertical
or horizontal mounting •Mounting capability to front
or side of stud •Compatibility with 1⁄2" or 3⁄8" drywall
•Models available for single or double gang wall plates
MCM Part #
502-MP1S
502-MP2S
Size
Single gang
Double gang
(1-9)
$2.09
1.99
Low Voltage Wall Mounting
Brackets
Ideal for any home theater or security
system installation, these brackets
accept any single or dual gang size wall
plate. May be used for any Class 2 low
voltage wiring application that does not
require an electrical box. #28-6355 and
#28-6356 have speed clips which allow
easy mounting to existing wall board
cut-out. #28-6357 and #28-6358 are
designed for new construction use,
and may be attached to either metal or
wood studs. Open back design allows
increased clearance, easing use with
multiple conductor and coaxial cable.
Fig.MCM Part #
A 28-6355
- 28-6356
B 28-6357
- 28-6358
122
Description
Single gang old work
Double gang old work
Single gang new work
Double gang new work
(10-24)
$1.76
0.00
Three and Four Gang Old Work
Low Voltage Wall Mounting Brackets
Three and four gang, class 2, low voltage, old-work
mounting brackets are the solution for faster and
easier mounting of flush wall plates in existing wall
board, paneling and drywall. •Features: Adjusts to fit
1
⁄4" to 1" thickness •Horizontal, or vertical mounting
•Thin front lip seats better on drywall, keeping plates
flushed to wall
MCM Part #
28-6353
28-6354
Gang
Three
Four
(1-3)
$3.42
5.50
(4-up)
$3.28
4.97
#28-17035
#28-17040
PVC Old Work Electrical Boxes
#28-17050
Designed for installing electrical outlets
and switches into existing walls and ceilings, these
boxes are perfect for all aspects of home theater,
security, data comm, telecom and CATV/satellite
installation. #28-17035 is standard 23⁄4" depth, others
are 33⁄4" deep, taking advantage of the full studded
wall thickness and allowing added space when large
numbers of cables are used. Attached rotating clamps
allow boxes to be easily installed in a cut opening,
requiring only a drywall saw and Philips head
screwdriver.
MCM Part # Size
28-17035 Single gang
28-17040 Deep single gang
28-17045 Deep double gang
28-17050 Deep triple gang
28-17055 Deep four gang
(1-3)
$2.56
2.97
3.88
5.71
8.54
(4-9)
$2.40
2.78
3.64
5.35
8.01
(10-up)
$2.17
2.52
3.29
4.85
7.25
PVC New Work
Electrical Boxes
Designed for installing
electrical outlets
and switches in new
construction applications,
these boxes are perfect
for all aspects of home theater, security, data comm,
telecom and CATV/satellite installation. 23⁄4" depth
is suitable for most conventional wiring applications.
Captive nails and 3⁄8" recess mark allows fast, easy
installation. Four cable knock–outs are provided per
gang size.
MCM Part # Size
28-17015
Single gang
28-17020
Double gang
(1–3)
$0.58
2.20
(4–9)
$0.54
2.06
#28-10670
(10–up)
$0.49
1.86
#28-10675
A
Low Voltage Mounting Bracket
B
(1-3) (4-up)
$1.66 $1.26
2.70 2.32
1.13 0.92
2.17 1.91
The perfect alternative to electrical
boxes, this single gang bracket offers
several advantages over conventional
old work low voltage brackets.
Unlike conventional brackets that
require tracing a templeate, and
cutting a rectangular opening with a
drywall saw, this bracket mounts in
a 31⁄2" round hole. Total installation
time of this bracket in a finished wall is
less than one minute. Features: •Simple 31⁄2" hole saw
installation •Paintable flange •Fits 1⁄4" to 11⁄2" thick
wall board •Finishes with any single gang wall plate
•Considerably more secure than standard old work
brackets
MCM Part #
50-10630
(1–3)
$2.70
(4–up)
$2.39
www.MCMelectronics.com /1-800-543-4330
Power/Low Voltage Combo-Boxes
Non metallic boxes are ideal in applications where
AC and low voltage devices are to be located together.
Perfect in situations where A/V or data connections
need to be located with an AC outlet, or when wall
switches and in-wall volume controls are to be located
together. New construction model may be attached to
wood or metal studs. Old work model uses rotating
clips for easy mounting to existing wall board cutouts.
MCM Part # Description
28-10670 Old work
28-10675 New construction
(1-9) (10-24) (25-up)
$5.14 $4.85 $4.40
4.11
-
-
Follow us on:
&
1
A/V Distribution
Audio/Video
WIRE AND CABLE
WIRE
WIRE
AND
AND
CABLE
CABLE
MANAGEMENT
SOLUTIONS
HellermannTyton
offers a vast SOLUTIONS
arraySOLUTIONS
of innovative
MANAGEMENT
MANAGEMENT
products and market-driven solutions for optimizing the
HellermannTyton
HellermannTyton
offers
a vasta array
vast labor
array
of innovative
of innovative
manufacturing
process
andoffers
improving
productivity.
products
products
and market-driven
and market-driven
solutions
solutions
for optimizing
for optimizing
the the
manufacturing
manufacturing
process
process
and improving
and improving
laborlabor
productivity.
productivity.
FASTENERS
CABLE TIES
A versatile range of cable
A variety of wire management
FASTENERS
FASTENERS
ties
for securing
wires,
cables
used
in conjunction
CABLE
CABLE
TIES
TIES devices
MOUNTS
An assortment of securing
MOUNTS
MOUNTS
mechanisms
that can be
and
components
together
A versatile
A versatile
range of
range
cable of cable
for
support
and
ease
ties for securing
ties for securing
wires,ofcables
wires, cables
with
cable
ties
tomanagement
affix
andmanagement
A variety
Aofvariety
wire
of wire
stabilize
wiring
devices used
devices
in bundles.
conjunction
used in conjunction
adhered
either
to securing
a surface
An assortment
An
assortment
of
of securing
mechanically
or
using
an
mechanisms
mechanisms
that can that
be can be
maintenance.
and components
and components
togethertogether
with cable
with
tiescable
to affix
tiesand
to affix and
adhesive.
adhered adhered
either toeither
a surface
to a surface
for support
for and
support
easeand
of ease of
stabilize stabilize
wiring bundles.
wiring bundles.
mechanically
mechanically
or using or
anusing an
maintenance.
maintenance.
adhesive.adhesive.
Meeting the strictest quality standards while
delivering reliable implementation at the lowest cost
Meeting
Meeting
the strictest
the strictest
quality
quality
standards
standards
whilewhile
delivering
delivering
reliable
reliable
implementation
implementation
at the
atlowest
the lowest
cost cost
Visit www.hellermann.tyton.com for material data,
product selection and additional information on
all our many products for bundling and securing
Visit
Visitand
www.hellermann.tyton.com
for material
for material
data,
data,
wires,www.hellermann.tyton.com
cable
their components.
product selection
product selection
and additional
and additional
information
information
on
on
all our many
all our
products
many products
for bundling
for bundling
and securing
and securing
wires, cable
wires,
and
cable
theirand
components.
their components.
www.MCMelectronics.com /1-800-543-4330
123

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project