PRICING
13
PRICING 20
WyreStorm HDMI® Over Single Category 5e Cable Extender
Source
VPW-280572
Cat5e/Cat6e Cable
Allows HDMI Audio/Video Signals to be transmitted
over a single Cat5e or Cat6 Cable
HDMI
- Transmission Range: Extends 1080p resolutions
up to 131 ft over Cat5e/Cat6 Cables under perfect
conditions
- Automatically adjusts feedback, equalization
and amplification
- Fully cascadable to create larger distributions
- EDID DIP switch on Transmitter to encourage
EDID communication between sources & displays
in the event of signal transmission difficulties
- For even greater control and fine tuning, each
receiver features a fully adjustable EQ distance
range for optimizing the transmission signal
- Follows IEEE-568B cable termination standards
- LED indications for visual power & video signal status
- HDCP compliant
- HDMI V1.3b supported
- Units contain ESD (electrostatic discharge)
protection technology to guard against static
build-up that can damage circuitry
- Transmits a wide-band one-way IR control signal
together with the HDMI signal
- 1080p HD video and HD Audio including Full
support of 3D applications - frame sequential
(Blu-ray) and Interlaced stereoscopic (satellite/
cable 3D broadcasts)
- 24bit color depth
- Mounting brackets included
- (2) 5V DC, UL Listed Power Supplies and
optional 5V USB power adapters
- Dimensions: 2.3” W x .9” H x 4.5” D
HDTV
WyreStorm HDMI® over Single Coaxial Cable Extender
HDMI
Source
VPW-280577
Allows HDMI Audio/Video Signals to be Transmitted
Using a single Coaxial Cable
Coax Cable
HDMI
- Transmission Range: Extends 1080p Resolution
Up to 328 ft (100 m) over RG-6 Coaxial Cable
(Dual and Quad-Shielded);Extends 1080p
Resolution Up to 164 ft (50 m) over RG-59 Coaxial Cable
- Works with HDMI and HDCP Compliant Devices
- Supports High Definition Resolution 1080p
- Auto-adjustment of feedback, equalization
& amplification
- LED indicators for power and signal status
- Transfers bi-directional IR control signals, IR RX
& TX included
- Equipped with ESD (Electro-Static Discharge)
protection
- Mounting ears are supplied
- Power Supply: (2) 5V DC
- Dimensions: 5” W x 1” H x 5” D
HDTV
1
13
PRICING 20
WyreStorm HDMI® 1x2 Splitter
WyreStorm HDMI® 1x4 Splitter
HDTV/Audio
HDMI
SOURCE
VPW-280782
VPW-280784
Allows 1 HDMI Source to be Connected to 2 HDMI Display Devices
Allows 1 HDMI Source to be Connected to 4 HDMI Display Devices
- Allows 1 HDMI Source to be Connected to 2 HDMI Display Devices
- Fully cascadable / multiple units may be combined to create a larger HD distribution
- Install in seconds for simple plug and play connection - no settings required
- Visible LED Input/Output status
- Distribution: One HDMI input, two identical HDMI outputs
- Full support high definition resolutions 1080p, 1080i, 720p &
other standard video formats
- Output auto-switching function - no buttons or switches on the unit to be set
- Buffers and amplifies the signal to ensure optimum transmission and
reception distances over 15m / 49ft (the typical recommended transmission
distances for HDMI cables)
- Each port supports HDMI or DVI signals
- HDCP compliant. HDMI 1.3b version
- PAL and NTSC compatible
- Mounting brackets included
- 5V DC, UL Listed Power Supply
- Dimensions: 3.4” W x 1.1” H x 2.7” D
- Fully cascadable / multiple units may be combined to create a larger HD distribution
- Install in seconds for simple plug & play connection - no settings required
- Distribution: One HDMI input, four identical HDMI outputs
- Full support high definition resolutions 1080p, 1080i, 720p and
other standard video formats
- EDID management - DIP switch function enables manual setting to
encourage communication between input/ouput devices
- Buffers and amplifies the signal to ensure optimum transmission and
reception distances over 15m / 49ft (the typical recommended transmission
distances for HDMI cables)
- HDCP compliant
- PAL and NTSC compatible
- HDMI 1.3b version
- Mounting brackets included
- 5V DC, UL Listed Power Supply
- Dimensions: 6.9” W x .9” H x 4.4” D
WyreStorm HDMI® 1x8 Splitter over UTP
VPW-280608
1x8 splitter that distributes a connected
HDMI source over distance to eight identical
synchronized outputs
- Transmission distance: 50m/164ft using well
terminated and installed Cat5e/6/7 cable
- Single HDMI input
- Seven identical, synchronized and integrated
dual Cat5e/6/7 with RJ45 outputs for connection
to receiver units, part number VPW-280781
(sold separately)
- One standard HDMI output to connect a local
display, audio system, or to use for cascading
purposes
- IR emitter input for source control from
display location
- Buffers, amplifies and equalizes the signal to
ensure optimum transmission and reception over
the length of the cable run without any loss in
video/audio quality
- Adjustable EDID DIP settings encourages
communication between devices to avoid
compatibility issues during installation
- Supports high definition resolutions up to 1080p
- Fully cascadable with Vanco Powered by
Wyrestorm units so multiple units may be
combined to create a larger HD distribution
- LED power, source select, output select indicator
- HDCP compliant
- HDMI 1.3b version
- Mounting brackets included
- Receivers sold separately, part number VPW-280781
- Power Supply: 5V DC, UL Listed
- Dimensions: 10.5” W x 1.7” H x 6” D
2
13
PRICING 20
Vanco Powered by WyreStorm HDMI® Receiver
WyreStorm HDMI® 1x8 Splitter
VPW-280781
VPW-280788
For Use with Vanco Powered by WyreStorm Matrix over
UTP and 1x8 Splitter over UTP (Part # VPW-280709,
VPW-280608
Allows 1 HDMI Source to be Connected to 8 HDMI Display Devices
- Transmission Range: Extends 1080p resolutions up 164 ft over dual Cat 5e or Cat 6 cable
- Reading and saving EDID function from displays
- IR receiver pigtail included
- 5V DC Power Supply
- FullHD1080P/ 120Hz
- HDCP compliant
- Auto-Adjustment of feedback, equalization and amplification
- LED indicator lights to show the power and video signals
- ESD Protection inside
- Supports Digital Audio Foramt, DTS-HD/Dolby-True HD/LPCM7.1/AC3/DTS/DSD
- Tested for Compatibility with all leading HD Video brands
- Tested with 7.1 Home Theater Systems
- Mounting Ears included
- Dimensions: 1.8” W x .9” H x 3.3” D
- Fully cascadable / multiple units may be combined to create a larger HD distribution
- Install in seconds for simple plug and play connection - no settings required
- Distribution: One HDMI input, eight identical HDMI outputs
- Full support high definition resolutions 1080p, 1080i, 720p and
other standard video formats
- Buffers and amplifies the signal to ensure optimum transmission and
reception distances over 15m / 49ft (the typical recommended transmission
distances for HDMI cables)
- HDCP compliant
- PAL and NTSC compatible
- HDMI 1.3b version
- Mounting brackets included
- 5V DC, UL Listed Power Supply
- Dimensions: 9.2” W x 1.2” H x 5.1” D
Vanco Powered by WyreStorm HDMI® 1x12 Splitter
VPW-280712
HDMI
Allows 1 HDMI Source to be Connected
to 12 HDMI Display Devices
- Fully cascadable so multiple units may be
combined to create a larger HD distribution
- Install in seconds for simple plug and and play
connection - no settings required
- Distribution: One HDMI input, twelve identical
HDMI outputs
- Full support high definition resolutions 1080p,
1080i, 720p and other standard video formats
- Buffers and amplifies the signal to ensure
optimum transmission and reception distances
over 15m / 49ft (the typical recommended
transmission distances for HDMI cables)
HDTV
HDTV
HDTV
- HDCP compliant
- PAL and NTSC compatible
- HDMI 1.3b version
- Mounting brackets included
- 5V DC, UL Listed Power Supply
- Dimensions: 12.7” W x 1.2” H x 6.3” D
HDTV
3
13
PRICING 20
WyreStorm 11 Input to 2 HDMI Output Multi-function Switcher and Scaler
VPW-280795
Allows the conversion of up to 11 multi-format inputs to 2 HDMI outputs
- Allows upscaling and switching from standard
definition/high definition sources to resolutions up
to 720p or 1080p, with both outputs working
simultaneously - some VESA formats can be
bypassed by using VGA and DVI-I ports
- Buffers, amplifies and equalizes the signal to
ensure optimum transmission and reception over
the length of the cable run without any loss in
video/audio quality
- 1 x VGA source. 1 x S-Video source
- 2 x Composite AV sources with stereo audio
- 2 x Component sources with analog audio
- 4 x HDMI sources (with one supporting 5.1
multichannel digital audio)
- 1 x DVI-I source with analog audio & digital
audio via optical*
- HDMI Outputs feature separate analog audio outputs
- Allows display(s) to view any source at anytime
- Supports bypass function with VGA & DVI-I ports
- DVI-I supports both analog and digital formats
with L/R and optical audio input*
- Detached audio output by L/R and optical
- Delivers uncompressed digital video with
zero signal loss
- Supports high definition resolutions up to 1080p
- Can bypass scaling and output as source
- 10-bit triple-ADC for RGB/YPbPr
- Dual switching option: IR control with remote
handset & manual front panel control
- Additional Remote control function with
RS232 connectivity
- Power Supply: 5V DC, UL Listed
- Dimensions: 17.2” W x 1.6” H x 7.4” D
WyreStorm HDMI® 4x2 Compact Matrix Selector Switch
VPW-280772
SOURCES
Allows up to 4 HDMI sources to be distributed
simultaneously to up to 2 displays
HDMI
HDMI
HDTV
HDTV
- Low cost, stripped down full HD Matrix Switcher
providing a perfect solution for Home or Retail
AV as well as Commercial & Hospitality
installations on a budget.
- 4 HDMI inputs with EDID management
adjustment to further encourage device
communication for fast, successful installations
- Automatically amplifies and equalizes the
HD signal for optimum performance with no
loss of quality
- 3 methods of control - front panel manual
switching, local IR with remote control or remote
IR extension at display location (dedicated IR
extension cable and IR emitters required)*
- Fully compatible with 1080p HD video &
HD multi-channel Audio
- With infrared extension & additional IR emitters
at source locations, discreet IR call back to
control HDMI source or HDMI MATRIX is possible
from remote display locations
- Remote control, IR accessories & mounting
brackets included HDCP compliant
- 2 output models via standard HDMI outs
- Dimensions: 8” W x 1.1” H x 3.7” D
- 6.75Gbps output bandwidth. 5V DC, UL Listed
Power Supply. HDMI 1.3V
WyreStorm HDMI® 4x4 Compact Matrix Selector Switch
VPW-280774
Allows up to 4 HDMI sources to be distributed
simultaneously to up to 4 displays
SOURCES
HDMI
HDTV
HDMI
HDTV
HDTV
HDTV
- Allows up to 4 HDMI sources to be distributed
simultaneously to up to 4 displays
- Low cost, stripped down full HD Matrix Switcher
providing a perfect solution for Home or Retail
AV as well as Commercial and Hospitality
installations on a budget.
- 4 output models via standard HDMI outs
- 4 HDMI inputs with EDID management
adjustment to further encourage device
communication for fast, successful installations
- Automatically amplifies and equalizes the HD signal
for optimum performance with no loss of quality
- Fully compatible with 1080p HD video &
HD multi-channel Audio
- 3 methods of control - front panel manual
switching, local IR with remote control or remote
IR extension at display location (dedicated IR
extension cable and IR emitters required)*
- With infrared extension and additional IR
emitters at source locations, discreet IR call
back to control HDMI source or HDMI MATRIX
is possible from remote display locations
- Remote control, IR accessories and mounting
brackets included HDCP compliant
- HDMI 1.3V
- 6.75Gbps output bandwidth
- 5V DC, UL Listed Power Supply
- Dimensions: 11” W x 1” H x 3.9” D
4
13
PRICING 20
WyreStorm HDMI® 4x4 Matrix Selector Switch with RS232
VPW-280789
SOURCES
Allows up to 4 HDMI sources to be distributed
simultaneously to up to 4 displays
HDMI
HDTV
HDMI
HDTV
HDTV
HDTV
- Low cost, full HD Matrix Switcher providing a
perfect solution for Home or Retail AV as well as
Commercial & Hospitality installations on a budget
- Each output is able to show any connected
source simultaneously regardless of whether the
input carries HDCP encryption
- HDMI ports also support DVI signals
- Each Output port can be fed to
multiple displays (cascaded)
- HDCP Compliant
- Automatically amplifies and equalizes the
HD signal for optimum performance with
no loss of quality
- Reads and copies EDID from connected devices
with additional EDID configuration through
customizable DIP switch settings for fast,
successful installations
- 2k resolution supported
- RS232 port for firmware updates or third party
control - open source integration protocols
available for market leading control systems
- HDMI v1.2, v1.3 supported
- Simple switching remote control included, which
can also be learned into a universal remote
handset to allow the control of multiple devices
from one handset.
- IR 3.5mm mini-jack extension port at rear for
local IR control even if unit is housed in an
enclosed space or for longer IR connections
- Supports 24Bit Color depth
- Signaling rate/output bandwidth of 6.75Gbps
- Fully compatible with 1080p HD video and
HD multichannel Audio
- Choose from 5 switching modes – front panel
buttons, Local remote control, RS232 control
(when paired with a extender set), IR call-back
(dedicated IR extension cable connected to IR
extension port, & IR emitters on sources required)
- Key locking to avoid accidental operation
- Mounting brackets included
- 19” standard, 1U size for rack installation
- 12V DC, UL Listed Power Supply
- Dimensions: 17.3” W x 1.7” H x 7.9” W
Wyrestorm Quick Install HDMI® 4x4 Matrix over UTP
VPW-280794
CableBox
BluRay
Gaming
HDMI
HDTV
HDTV
AppleTV
HDMI
HDTV
HDTV
Enables up to 4 HDMI video/audio devices to be independently switched to 4 HDMI
displays or projectors for uncompressed digital distribution up to 40m (130ft) over a
single Cat5e/Cat6 cable
- Additional HDMI output per UTP output for flexibility or
mirroring capability, able to be utilized as a 4x8 Matrix
- Each output is able to show any connected source
simultaneously regardless of whether the input
carries HDCP encryption
- Designed work seamlessly together for complete
compatibility and full management of handshakes,
screen resolutions and HD signal distribution to
each display point, whether in a residential or
commercial environment
- Fully cascadable so multiple units may be
combined to create a larger HD distribution
- Reads and copies EDID from connected devices
with additional EDID configuration through
customizable DIP switch settings
- Simplified ports - Input: HDMI – Output: integrated
RJ45 connectors for a single Cat5ei/6/7 UTP cable
to each display point for ease of installation.
- Conforms to IEEE-568B standards
- Each HDMI port also supports DVI signals
- 2k resolution supported
- Fully 3D compatible – Frame sequential 3D
(Blu-ray) and interlaced stereoscopic 3D
(satellite broadcasts etc.)
- Supports all high definition resolutions up to 1080p
- For even greater control and fine tuning, each
receiver features a fully adjustable EQ distance
range for optimizing the transmission signal
- Protection against ESD (electrostatic discharge)
included within the receiver units to further
stabilize transmission
- Receivers feature LED indicators for clear power
and video signal selection
- RS232 port
- Choose from 6 switching modes – infrared remote
control, front panel buttons, local IR, IR call-back,
LAN and RS232
- Simple switching remote control included, which can
also be learned into a universal remote handset to
allow the control of multiple devices from one handset.
- Fully compatible for integration with market
leading control systems
- 4 x IR 3.5mm mini-jack ports for each output to
link IR from control system to control display
- Additional infrared extension port for longer
IR connections
- Supports 24Bit Color depth. HDMI v.1.3
- Signaling rate of 6.75 Gbps
- Pack comes complete with 1 x 4x4 Matrix with
19” brackets, 4 x 40m IR receivers with mounting
brackets, IR receivers, emitters & a Matrix remote control
- 12V DC, UL Listed Power supply for 4x4 matrix
- 5V DC, UL Listed Power Supplies for Receivers (4 total)
- 4x4 Matrix Dimensions: 17.25” W x 1.75” H x 7.63” D
- Receivers Dimensions: 2.5” W x .88” H x 3.25” D
5
13
PRICING 20
WyreStorm HDMI® 8x8 Matrix Selector Switch over UTP with IR and RS232 Control
VPW-280709
WyreStorm HDMI® 8x8 Matrix Selector Switch over
UTP with IR & RS232 Control
- Offers Unprecedented Flexibility & Convenience
by Extending High Definition Audio/Video
Signals from any of 8 HDMI Sources to any of 8
Remote Displays over Single Cat5e/Cat6 Cables
- Transmission Range: Extends 1080p resolutions
up to 100 ft over Single or Cat5e Cables; Extends
1080p resolutions up to 110 ft over Single
Cat6 Cables
- Additional HDMI output per UTP output for
flexibility or mirroring capability, able to be
utilized as a 8x16 Matrix
- Reading and saving EDID function from displays
- Additional RJ45 Output allows for transmission
of IR signals over Single Cat5e/Cat6 Cable
- Includes Eight IR emitters to control the
HDMI sources
- Supports Dual Band IR in 38 and 56 KHz modes
- Includes RS232 Exdender over Cat5e/Cat6
- 19” Rack Mounting
- Includes Remote Control
- 8x8 Matrix Dimensions: 17.25” W x 7” H x 15.25” D
- High Speed Chip Set that Supports 3D & 4K x 2K
- Six switching modes are available: panel buttons,
local IR, IR call back from remote locations, RS232, RS-485 & Ethernet
- Each output includes one HDMI type A connecter
& a set of dual RJ-45 connectors as the second
mirrored HDMI output. The two outputs can work
simultaneously. The UTP outputs support both
dual & single Cat 5e/Cat 6 UTP/STP cables
- Each port supports both HDMI & DVI inputs
- Full HD1080P/60Hz
- HDCP Compliant
- Supports Digital Audio Format, DTS-HD/DolbyTrue HD/LPCM7.1/AC3/DTS/DSD
- Tested for Compatibility with all leading
HD Video brands
- Tested with 7.1 Home Theater Systems
Vanco Powered by WyreStorm HDMI® 8x8 HDBaseT Lite Matrix
VPW-280771
Allows any 8 HDMI input to be distributed independently and simultaneously over
distances of up to 70m (230ft) to any of the 8 HD output displays connected to the
matrix, regardless of HDCP encryption, with discrete IR control
- Features Duplicate HDMI ports on each UTP
output for connection to HDMI sources such as
an additional display (effectively doubling the
outputs), AV Receiver, or alternative mode of
extension (Coax, Full HDMI, Fiber
- Conforms to IEEE-568B standards
- Each HDMI port also supports DVI inputs
- Each output is able to show any connected
source simultaneously regardless of whether the
input carries HDCP encryption
- HDCP compliant with constant feed to prevent
screen drop-outs
- Refined for Custom Install & Home Theater Installations
- Reads and copies EDID from connected devices
with additional EDID configuration through
customizable DIP switch settings
- The same robust transmission technology as full
HDBT that is far more resistant to electrostatic
interference than conventional non-HDBT distribution
- HDMI v1.4 with full 3D compatibility with frame
sequential (Blu-Ray) and interlaced Stereoscoptic
(satellite/cable broadcasts)
- 2K resolution
- 36bit Deep Color supported
- 6.75 Gbps bandwidth range/signaling rate
- Central RS232 control – fully compatible with all
market leading control systems with full
integration protocols available for AMX,
Control 4, Crestron, Red Eye, Nevo, RTI,
Control FX, Savant, Bit Wise
- LAN control – with Control 4 LAN protocols
- Wide range, two way discrete IR control between
source and display and vice versa
(30 KHz to 56 KHz frequency)
- 70m (131ft) distance range of matrix/extenders
under perfect transmission conditions*
- Each Output port can be fed to multiple displays
(cascaded)
- Supports all high definition resolutions up to and
including 1080p and standard video formats
- Choose from 5 switching modes – infrared
remote control, front panel buttons, local IR,
IR call-back, and RS232
- Simple switching remote control included, which
can also be learned into a universal remote
handset to allow the control of multiple devices
from one handset
- 8 x IR 3.5mm mini-jack ports for each output
- Additional infrared extension port for longer
IR connections
6
13
PRICING 20
WyreStorm HDMI® HDBaseT Lite Receiver
VPW-280773
For Use with Vanco’s HDMI 8x8 HDBaseT Lite Matrix
Selector Switch (Part # VPW-280771)
- Receivers capable of 1080p HD @60Hz and
HD multichannel audio transmissions up to
70m (230ft) under perfect conditions*
- Transmits discrete wide-band two-way IR control
signal together within the HDMI signal over a
single Cat5e/6 cable
- Centralized RS232 for firmware updates or third
party control with open source integration
protocols available for market leading control systems
- Fully supports 3D applications (frame sequential
– Blu-ray and Interlaced Stereoscopic –
Satellite/cable broadcasts)
- Supports 36bit Deep Color. HDMI V1.4.
HDCP compliant
- Cable termination follows IEEE-568B standards
- Automatically adjusts feedback, equalization and
amplification of signal for easy installation
- LED indications for visual power & video signal status
- Receivers powered by 5v mains adapter or with
the 5v USB power cable (both included) to solve
space or power availability problems as well as
being more energy efficient as the extenders are
only powered when connected devices are turned on
- Fully cascadable to further lengthen transmission
& increase your distribution capabilities
WyreStorm HDMI® 16 x 16 HDBaseT Matrix
VPW-280799
Allows 16 HDMI audio/video devices to be independently
switched to 16 HDMI monitors, HDTVs, or projectors
- Features HDBaseT Technology, optimized for
whole-home or commercial distribution of
uncompressed high-definition signals at three times
the distance of HDMI cables without degradation
- Transmission Range: Extends 1080p resolutions
up 328 ft over a single Cat 5e or Cat 6 cable
- Includes Ethernet Extender Capability
- Reading and saving EDID function from displays
- 16 IR emitters are included to control the HDMI sources
- Supports Dual Band IR in 38 and 56 KHz modes
- Includes RS232 Extender over Cat5e/Cat6
- 19” Rack Mounting
- 16x16 Matrix Dimensions: 17.25” W x 13.75” H x 15.25” D
- Includes Remote Control
- HDBaseT Technology that supports 3D & 4K x 2K
- Seven switching modes are available: panel
buttons, touch panel, local IR, IR call back from
remote locations, RS-232, RS-485 and Ethernet
- Supports Digital Audio Format, DTS-HD/
Dolby-True HD/LPCM7.1/AC3/DTS/DSD
- RS-232 port can be configured with dip switches to
be used for firmware updates or for RS-232 control
- Provides three records to save the current state of
the matrix routing switch
- Touch screen allows for source signal preview and
control of the Matrix Unit
- IR code edit. HDCP compliant. FullHD1080P/ 120Hz
- Tested with 7.1 Home Theater Systems
WyreStorm HDBaseT Receiver
VPW-280791
For Use with Vanco’s 16x16 and 8x8 HDBaseT Matrix Selector Switches
- Features HDBaseT Technology, optimized for
whole-home or commercial distribution of
uncompressed high-definition signals at three
times the distance of HDMI cables without degradation
- Transmission Range: Extends 1080p resolutions
up 328 ft over a single Cat 5e or Cat 6 cable
- Includes Ethernet Extender Capability
- Reading and saving EDID function from displays
- IR receiver included
- Dimensions: 6” W x 1” H x 4.25” D
- HDBaseT Technology that supports 3D & 4K x 2K
- FullHD1080P/ 120Hz
- HDCP compliant
- Supports Digital Audio Foramt, DTS-HD/
Dolby-True HD/LPCM7.1/AC3/DTS/DSD
- Tested for Compatibility with all leading
HD Video brands
- Tested with 7.1 Home Theater Systems
7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement